|
@@ -864,10 +864,6 @@ static struct hda_verb stac92hd73xx_core_init[] = {
|
|
|
};
|
|
|
|
|
|
static struct hda_verb stac92hd83xxx_core_init[] = {
|
|
|
- { 0xa, AC_VERB_SET_CONNECT_SEL, 0x1},
|
|
|
- { 0xb, AC_VERB_SET_CONNECT_SEL, 0x1},
|
|
|
- { 0xd, AC_VERB_SET_CONNECT_SEL, 0x0},
|
|
|
-
|
|
|
/* power state controls amps */
|
|
|
{ 0x01, AC_VERB_SET_EAPD, 1 << 2},
|
|
|
{}
|
|
@@ -1590,8 +1586,8 @@ static unsigned int ref92hd83xxx_pin_configs[10] = {
|
|
|
};
|
|
|
|
|
|
static unsigned int dell_s14_pin_configs[10] = {
|
|
|
- 0x02214030, 0x02211010, 0x02a19020, 0x01014050,
|
|
|
- 0x40f000f0, 0x01819040, 0x40f000f0, 0x90a60160,
|
|
|
+ 0x0221403f, 0x0221101f, 0x02a19020, 0x90170110,
|
|
|
+ 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a60160,
|
|
|
0x40f000f0, 0x40f000f0,
|
|
|
};
|
|
|
|
|
@@ -1690,6 +1686,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
|
|
|
"HP mini 1000", STAC_HP_M4),
|
|
|
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361b,
|
|
|
"HP HDX", STAC_HP_HDX), /* HDX16 */
|
|
|
+ SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3620,
|
|
|
+ "HP dv6", STAC_HP_DV5),
|
|
|
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010,
|
|
|
"HP", STAC_HP_DV5),
|
|
|
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
|
|
@@ -4166,7 +4164,10 @@ static int stac92xx_init(struct hda_codec *codec)
|
|
|
stac92xx_auto_set_pinctl(codec, spec->autocfg.line_out_pins[0],
|
|
|
AC_PINCTL_OUT_EN);
|
|
|
/* fake event to set up pins */
|
|
|
- stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
|
|
|
+ if (cfg->hp_pins[0])
|
|
|
+ stac_issue_unsol_event(codec, cfg->hp_pins[0]);
|
|
|
+ else if (cfg->line_out_pins[0])
|
|
|
+ stac_issue_unsol_event(codec, cfg->line_out_pins[0]);
|
|
|
} else {
|
|
|
stac92xx_auto_init_multi_out(codec);
|
|
|
stac92xx_auto_init_hp_out(codec);
|
|
@@ -4688,8 +4689,13 @@ static int stac92xx_resume(struct hda_codec *codec)
|
|
|
snd_hda_codec_resume_amp(codec);
|
|
|
snd_hda_codec_resume_cache(codec);
|
|
|
/* fake event to set up pins again to override cached values */
|
|
|
- if (spec->hp_detect)
|
|
|
- stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
|
|
|
+ if (spec->hp_detect) {
|
|
|
+ if (spec->autocfg.hp_pins[0])
|
|
|
+ stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
|
|
|
+ else if (spec->autocfg.line_out_pins[0])
|
|
|
+ stac_issue_unsol_event(codec,
|
|
|
+ spec->autocfg.line_out_pins[0]);
|
|
|
+ }
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
@@ -5016,7 +5022,7 @@ again:
|
|
|
spec->eapd_switch = 1;
|
|
|
break;
|
|
|
}
|
|
|
- if (spec->board_config > STAC_92HD73XX_REF) {
|
|
|
+ if (spec->board_config != STAC_92HD73XX_REF) {
|
|
|
/* GPIO0 High = Enable EAPD */
|
|
|
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
|
|
|
spec->gpio_data = 0x01;
|
|
@@ -5066,7 +5072,6 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
|
|
|
|
|
|
codec->spec = spec;
|
|
|
codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
|
|
|
- spec->mono_nid = 0x19;
|
|
|
spec->digbeep_nid = 0x21;
|
|
|
spec->mux_nids = stac92hd83xxx_mux_nids;
|
|
|
spec->num_muxes = ARRAY_SIZE(stac92hd83xxx_mux_nids);
|
|
@@ -5242,7 +5247,7 @@ again:
|
|
|
stac92xx_set_config_regs(codec,
|
|
|
stac92hd71bxx_brd_tbl[spec->board_config]);
|
|
|
|
|
|
- if (spec->board_config > STAC_92HD71BXX_REF) {
|
|
|
+ if (spec->board_config != STAC_92HD71BXX_REF) {
|
|
|
/* GPIO0 = EAPD */
|
|
|
spec->gpio_mask = 0x01;
|
|
|
spec->gpio_dir = 0x01;
|
|
@@ -5375,6 +5380,11 @@ again:
|
|
|
case STAC_HP_DV5:
|
|
|
snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010);
|
|
|
stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN);
|
|
|
+ /* HP dv6 gives the headphone pin as a line-out. Thus we
|
|
|
+ * need to set hp_detect flag here to force to enable HP
|
|
|
+ * detection.
|
|
|
+ */
|
|
|
+ spec->hp_detect = 1;
|
|
|
break;
|
|
|
case STAC_HP_HDX:
|
|
|
spec->num_dmics = 1;
|
|
@@ -5557,14 +5567,17 @@ static int patch_stac927x(struct hda_codec *codec)
|
|
|
spec->dac_list = stac927x_dac_nids;
|
|
|
spec->multiout.dac_nids = spec->dac_nids;
|
|
|
|
|
|
+ if (spec->board_config != STAC_D965_REF) {
|
|
|
+ /* GPIO0 High = Enable EAPD */
|
|
|
+ spec->eapd_mask = spec->gpio_mask = 0x01;
|
|
|
+ spec->gpio_dir = spec->gpio_data = 0x01;
|
|
|
+ }
|
|
|
+
|
|
|
switch (spec->board_config) {
|
|
|
case STAC_D965_3ST:
|
|
|
case STAC_D965_5ST:
|
|
|
/* GPIO0 High = Enable EAPD */
|
|
|
- spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x01;
|
|
|
- spec->gpio_data = 0x01;
|
|
|
spec->num_dmics = 0;
|
|
|
-
|
|
|
spec->init = d965_core_init;
|
|
|
break;
|
|
|
case STAC_DELL_BIOS:
|
|
@@ -5583,16 +5596,11 @@ static int patch_stac927x(struct hda_codec *codec)
|
|
|
snd_hda_codec_set_pincfg(codec, 0x0e, 0x02a79130);
|
|
|
/* fallthru */
|
|
|
case STAC_DELL_3ST:
|
|
|
- /* GPIO2 High = Enable EAPD */
|
|
|
- spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x04;
|
|
|
- spec->gpio_data = 0x04;
|
|
|
- switch (codec->subsystem_id) {
|
|
|
- case 0x1028022f:
|
|
|
- /* correct EAPD to be GPIO0 */
|
|
|
- spec->eapd_mask = spec->gpio_mask = 0x01;
|
|
|
- spec->gpio_dir = spec->gpio_data = 0x01;
|
|
|
- break;
|
|
|
- };
|
|
|
+ if (codec->subsystem_id != 0x1028022f) {
|
|
|
+ /* GPIO2 High = Enable EAPD */
|
|
|
+ spec->eapd_mask = spec->gpio_mask = 0x04;
|
|
|
+ spec->gpio_dir = spec->gpio_data = 0x04;
|
|
|
+ }
|
|
|
spec->dmic_nids = stac927x_dmic_nids;
|
|
|
spec->num_dmics = STAC927X_NUM_DMICS;
|
|
|
|
|
@@ -5601,14 +5609,9 @@ static int patch_stac927x(struct hda_codec *codec)
|
|
|
spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids);
|
|
|
break;
|
|
|
default:
|
|
|
- if (spec->board_config > STAC_D965_REF) {
|
|
|
- /* GPIO0 High = Enable EAPD */
|
|
|
- spec->eapd_mask = spec->gpio_mask = 0x01;
|
|
|
- spec->gpio_dir = spec->gpio_data = 0x01;
|
|
|
- }
|
|
|
spec->num_dmics = 0;
|
|
|
-
|
|
|
spec->init = stac927x_core_init;
|
|
|
+ break;
|
|
|
}
|
|
|
|
|
|
spec->num_caps = STAC927X_NUM_CAPS;
|