gpio: Fix DA9052 GPIO build errors.

This patch is functionally tested on Samsung SMDKV6410.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
[grant.likely: don't create an unnecessary header file]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

drivers/gpio/gpio-da9052.c

@@ -22,7 +22,6 @@
 #include <linux/mfd/da9052/da9052.h>
 #include <linux/mfd/da9052/reg.h>
 #include <linux/mfd/da9052/pdata.h>
-#include <linux/mfd/da9052/gpio.h>
 
 #define DA9052_INPUT				1
 #define DA9052_OUTPUT_OPENDRAIN		2
@@ -43,6 +42,9 @@
 #define DA9052_GPIO_MASK_UPPER_NIBBLE		0xF0
 #define DA9052_GPIO_MASK_LOWER_NIBBLE		0x0F
 #define DA9052_GPIO_NIBBLE_SHIFT		4
+#define DA9052_IRQ_GPI0			16
+#define DA9052_GPIO_ODD_SHIFT			7
+#define DA9052_GPIO_EVEN_SHIFT			3
 
 struct da9052_gpio {
 	struct da9052 *da9052;
@@ -104,33 +106,26 @@ static int da9052_gpio_get(struct gpio_chip *gc, unsigned offset)
 static void da9052_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
 {
 	struct da9052_gpio *gpio = to_da9052_gpio(gc);
-	unsigned char register_value = 0;
 	int ret;
 
 	if (da9052_gpio_port_odd(offset)) {
-		if (value) {
-			register_value = DA9052_GPIO_ODD_PORT_MODE;
 			ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
 						DA9052_GPIO_0_1_REG,
 						DA9052_GPIO_ODD_PORT_MODE,
-						register_value);
+						value << DA9052_GPIO_ODD_SHIFT);
 			if (ret != 0)
 				dev_err(gpio->da9052->dev,
 					"Failed to updated gpio odd reg,%d",
 					ret);
-		}
 	} else {
-		if (value) {
-			register_value = DA9052_GPIO_EVEN_PORT_MODE;
 			ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
 						DA9052_GPIO_0_1_REG,
 						DA9052_GPIO_EVEN_PORT_MODE,
-						register_value);
+						value << DA9052_GPIO_EVEN_SHIFT);
 			if (ret != 0)
 				dev_err(gpio->da9052->dev,
 					"Failed to updated gpio even reg,%d",
 					ret);
-		}
 	}
 }
 
@@ -201,9 +196,9 @@ static struct gpio_chip reference_gp __devinitdata = {
 	.direction_input = da9052_gpio_direction_input,
 	.direction_output = da9052_gpio_direction_output,
 	.to_irq = da9052_gpio_to_irq,
-	.can_sleep = 1;
-	.ngpio = 16;
-	.base = -1;
+	.can_sleep = 1,
+	.ngpio = 16,
+	.base = -1,
 };
 
 static int __devinit da9052_gpio_probe(struct platform_device *pdev)