Merge tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:
mxs soc changes for 3.9

 - A couple of optimization on timer
 - Some updates on mxs_defconfig

* tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ARM: mxs: Update mxs_defconfig

arch/arm/configs/mxs_defconfig

@@ -1,5 +1,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
@@ -8,7 +10,6 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_PERF_EVENTS=y
@@ -24,8 +25,6 @@ CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_MXS=y
 CONFIG_MACH_MXS_DT=y
 # CONFIG_ARM_THUMB is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 CONFIG_AUTO_ZRELADDR=y
@@ -46,25 +45,34 @@ CONFIG_SYN_COOKIES=y
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
-CONFIG_CAN_DEV=m
 CONFIG_CAN_FLEXCAN=m
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
 CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MTD_SST25L=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_UBI=y
+# CONFIG_BLK_DEV is not set
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_ENC28J60=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_MICREL_PHY=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=m
@@ -91,21 +99,6 @@ CONFIG_SPI_MXS=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_DISPLAY_SUPPORT=m
-# CONFIG_HID_SUPPORT is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_DRIVERS=y
-CONFIG_SND_ARM=y
-CONFIG_SND_SOC=y
-CONFIG_SND_MXS_SOC=y
-CONFIG_SND_SOC_MXS_SGTL5000=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_SGTL5000=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
@@ -117,13 +110,16 @@ CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_MXS_SOC=y
+CONFIG_SND_SOC_MXS_SGTL5000=y
 CONFIG_USB=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_MXS_PHY=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
 CONFIG_MMC=y
 CONFIG_MMC_MXS=y
 CONFIG_NEW_LEDS=y
@@ -147,16 +143,23 @@ CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_IIO=y
 CONFIG_PWM=y
 CONFIG_PWM_MXS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_FSCACHE=m
 CONFIG_FSCACHE_STATS=y
 CONFIG_CACHEFILES=m
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
@@ -170,17 +173,12 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOCKUP_DETECTOR=y
-CONFIG_DETECT_HUNG_TASK=y
 CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_STRICT_DEVMEM=y
 CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_ITU_T=m

arch/arm/mach-mxs/timer.c

@@ -72,8 +72,9 @@
 #define BM_TIMROT_TIMCTRLn_IRQ_EN	(1 << 14)
 #define BM_TIMROT_TIMCTRLn_IRQ		(1 << 15)
 #define BP_TIMROT_TIMCTRLn_SELECT	0
-#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL	0x8
-#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL	0xb
+#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL		0x8
+#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL		0xb
+#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS	0xf
 
 static struct clock_event_device mxs_clockevent_device;
 static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
@@ -206,7 +207,8 @@ static int __init mxs_clockevent_init(struct clk *timer_clk)
 		mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
 	mxs_clockevent_device.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&mxs_clockevent_device,
-					clk_get_rate(timer_clk), 0xf,
+					clk_get_rate(timer_clk),
+					timrot_is_v1() ? 0xf : 0x2,
 					timrot_is_v1() ? 0xfffe : 0xfffffffe);
 
 	return 0;
@@ -274,7 +276,7 @@ void __init mxs_timer_init(void)
 	/* one for clock_event */
 	__raw_writel((timrot_is_v1() ?
 			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
-			BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
+			BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
 			BM_TIMROT_TIMCTRLn_UPDATE |
 			BM_TIMROT_TIMCTRLn_IRQ_EN,
 			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
@@ -282,7 +284,7 @@ void __init mxs_timer_init(void)
 	/* another for clocksource */
 	__raw_writel((timrot_is_v1() ?
 			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
-			BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
+			BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
 			BM_TIMROT_TIMCTRLn_RELOAD,
 			mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
 

drivers/clk/mxs/clk-imx28.c

@@ -238,7 +238,7 @@ int __init mx28_clocks_init(void)
 		of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 	}
 
-	clk_register_clkdev(clks[clk32k], NULL, "timrot");
+	clk_register_clkdev(clks[xbus], NULL, "timrot");
 	clk_register_clkdev(clks[enet_out], NULL, "enet_out");
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)