ide: change ->set_dma_mode method parameters

Change ->set_dma_mode method parameters to match ->set_dmamode method
used in struct ata_port_operations.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/aec62xx.c

@@ -81,15 +81,15 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
 	return chipset_table->ultra_settings;
 }
 
-static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
+static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct ide_host *host	= pci_get_drvdata(dev);
 	struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
 	u16 d_conf		= 0;
 	u8 ultra = 0, ultra_conf = 0;
 	u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
+	const u8 speed = drive->dma_mode;
 	unsigned long flags;
 
 	local_irq_save(flags);
@@ -109,15 +109,15 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
 	local_irq_restore(flags);
 }
 
-static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
+static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct ide_host *host	= pci_get_drvdata(dev);
 	struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
 	u8 unit			= drive->dn & 1;
 	u8 tmp1 = 0, tmp2 = 0;
 	u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
+	const u8 speed = drive->dma_mode;
 	unsigned long flags;
 
 	local_irq_save(flags);
@@ -137,7 +137,7 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
 static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	drive->dma_mode = drive->pio_mode;
-	hwif->port_ops->set_dma_mode(drive, drive->dma_mode);
+	hwif->port_ops->set_dma_mode(hwif, drive);
 }
 
 static int init_chipset_aec62xx(struct pci_dev *dev)

drivers/ide/alim15x3.c

@@ -121,16 +121,16 @@ static u8 ali_udma_filter(ide_drive_t *drive)
 
 /**
  *	ali_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Configure the hardware for the desired IDE transfer mode.
  */
 
-static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	const u8 speed		= drive->dma_mode;
 	u8 speed1		= speed;
 	u8 unit			= drive->dn & 1;
 	u8 tmpbyte		= 0x00;

drivers/ide/amd74xx.c

@@ -79,14 +79,14 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
  * to a desired transfer mode.  It also can be called by upper layers.
  */
 
-static void amd_set_drive(ide_drive_t *drive, const u8 speed)
+static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	ide_drive_t *peer = ide_get_pair_dev(drive);
 	struct ide_timing t, p;
 	int T, UT;
 	u8 udma_mask = hwif->ultra_mask;
+	const u8 speed = drive->dma_mode;
 
 	T = 1000000000 / amd_clock;
 	UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
@@ -110,7 +110,8 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
 
 static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	amd_set_drive(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	amd_set_drive(hwif, drive);
 }
 
 static void amd7409_cable_detect(struct pci_dev *dev)

drivers/ide/atiixp.c

@@ -75,21 +75,22 @@ static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	atiixp_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Set a ATIIXP host controller to the desired DMA mode.  This involves
  *	programming the right timing data into the PCI configuration space.
  */
 
-static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long flags;
 	int timing_shift = (drive->dn ^ 1) * 8;
 	u32 tmp32;
 	u16 tmp16;
 	u16 udma_ctl = 0;
+	const u8 speed = drive->dma_mode;
 
 	spin_lock_irqsave(&atiixp_lock, flags);
 

drivers/ide/au1xxx-ide.c

@@ -160,11 +160,11 @@ static void au1xxx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	au_writel(mem_stcfg,MEM_STCFG2);
 }
 
-static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void auide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
 
-	switch(speed) {
+	switch (drive->dma_mode) {
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 	case XFER_MW_DMA_2:
 		mem_sttime = SBC_IDE_TIMING(MDMA2);

drivers/ide/cmd64x.c

@@ -141,12 +141,12 @@ static void cmd64x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	cmd64x_program_timings(drive, XFER_PIO_0 + pio);
 }
 
-static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void cmd64x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 unit			= drive->dn & 0x01;
 	u8 regU = 0, pciU	= hwif->channel ? UDIDETCR1 : UDIDETCR0;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_byte(dev, pciU, &regU);
 	regU &= ~(unit ? 0xCA : 0x35);

drivers/ide/cs5520.c

@@ -81,12 +81,12 @@ static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 		(cs5520_pio_clocks[pio].assert));
 }
 
-static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	printk(KERN_ERR "cs55x0: bad ide timing.\n");
 
 	drive->pio_mode = XFER_PIO_0 + 0;
-	cs5520_set_pio_mode(drive->hwif, drive);
+	cs5520_set_pio_mode(hwif, drive);
 }
 
 static const struct ide_port_ops cs5520_port_ops = {

drivers/ide/cs5530.c

@@ -100,12 +100,12 @@ out:
 	return mask;
 }
 
-static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void cs5530_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	unsigned long basereg;
 	unsigned int reg, timings = 0;
 
-	switch (mode) {
+	switch (drive->dma_mode) {
 		case XFER_UDMA_0:	timings = 0x00921250; break;
 		case XFER_UDMA_1:	timings = 0x00911140; break;
 		case XFER_UDMA_2:	timings = 0x00911030; break;
@@ -113,7 +113,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
 		case XFER_MW_DMA_1:	timings = 0x00012121; break;
 		case XFER_MW_DMA_2:	timings = 0x00002020; break;
 	}
-	basereg = CS5530_BASEREG(drive->hwif);
+	basereg = CS5530_BASEREG(hwif);
 	reg = inl(basereg + 4);			/* get drive0 config register */
 	timings |= reg & 0x80000000;		/* preserve PIO format bit */
 	if ((drive-> dn & 1) == 0) {		/* are we configuring drive0? */

drivers/ide/cs5535.c

@@ -129,15 +129,15 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
 
 /**
  *	cs5535_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Programs the chipset for DMA mode.
  */
 
-static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	cs5535_set_speed(drive, speed);
+	cs5535_set_speed(drive, drive->dma_mode);
 }
 
 /**

drivers/ide/cs5536.c

@@ -173,11 +173,11 @@ static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	cs5536_set_dma_mode		-	DMA timing setup
+ *	@hwif: ATA port
  *	@drive: ATA device
- *	@mode: DMA mode
  */
 
-static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static const u8 udma_timings[6] = {
 		0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
@@ -187,10 +187,11 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
 		0x67, 0x21, 0x20,
 	};
 
-	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
 	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u32 etc;
+	const u8 mode = drive->dma_mode;
 
 	cs5536_read(pdev, ETC, &etc);
 

drivers/ide/cy82c693.c

@@ -53,9 +53,9 @@
  * set DMA mode a specific channel for CY82C693
  */
 
-static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
+	const u8 mode = drive->dma_mode;
 	u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
 
 	index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;

drivers/ide/hpt366.c

@@ -627,14 +627,14 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
 	return info->timings->clock_table[info->clock][i];
 }
 
-static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
+static void hpt3xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	struct hpt_timings *t	= info->timings;
 	u8  itr_addr		= 0x40 + (drive->dn * 4);
 	u32 old_itr		= 0;
+	const u8 speed		= drive->dma_mode;
 	u32 new_itr		= get_speed_setting(speed, info);
 	u32 itr_mask		= speed < XFER_MW_DMA_0 ? t->pio_mask :
 				 (speed < XFER_UDMA_0   ? t->dma_mask :
@@ -653,7 +653,8 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void hpt3xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	hpt3xx_set_mode(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	hpt3xx_set_mode(hwif, drive);
 }
 
 static void hpt3xx_maskproc(ide_drive_t *drive, int mask)

drivers/ide/icside.c

@@ -185,10 +185,11 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
  *	MW1	80	50	50	150	C
  *	MW2	70	25	25	120	C
  */
-static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
+static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	unsigned long cycle_time;
 	int use_dma_info = 0;
+	const u8 xfer_mode = drive->dma_mode;
 
 	switch (xfer_mode) {
 	case XFER_MW_DMA_2:

drivers/ide/ide-xfer-mode.c

@@ -168,11 +168,11 @@ int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
 		if (ide_config_drive_speed(drive, mode))
 			return -1;
 		drive->dma_mode = mode;
-		port_ops->set_dma_mode(drive, mode);
+		port_ops->set_dma_mode(hwif, drive);
 		return 0;
 	} else {
 		drive->dma_mode = mode;
-		port_ops->set_dma_mode(drive, mode);
+		port_ops->set_dma_mode(hwif, drive);
 		return ide_config_drive_speed(drive, mode);
 	}
 }

drivers/ide/it8172.c

@@ -77,14 +77,14 @@ static void it8172_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	pci_write_config_dword(dev, 0x44, drive_timing);
 }
 
-static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void it8172_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	int a_speed		= 3 << (drive->dn * 4);
 	int u_flag		= 1 << drive->dn;
 	int u_speed		= 0;
 	u8 reg48, reg4a;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_byte(dev, 0x48, &reg48);
 	pci_read_config_byte(dev, 0x4a, &reg4a);

drivers/ide/it8213.c

@@ -74,15 +74,14 @@ static void it8213_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	it8213_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Tune the ITE chipset for the DMA mode.
  */
 
-static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void it8213_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 maslave		= 0x40;
 	int a_speed		= 3 << (drive->dn * 4);
@@ -92,6 +91,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	int u_speed		= 0;
 	u16			reg4042, reg4a;
 	u8			reg48, reg54, reg55;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_word(dev, maslave, &reg4042);
 	pci_read_config_byte(dev, 0x48, &reg48);

drivers/ide/it821x.c

@@ -393,14 +393,16 @@ static int it821x_dma_end(ide_drive_t *drive)
 
 /**
  *	it821x_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Tune the ITE chipset for the desired DMA mode.
  */
 
-static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void it821x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
+	const u8 speed = drive->dma_mode;
+
 	/*
 	 * MWDMA tuning is really hard because our MWDMA and PIO
 	 * timings are kept in the same place.  We can switch in the

drivers/ide/jmicron.c

@@ -86,13 +86,13 @@ static void jmicron_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	jmicron_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@mode: DMA mode
  *
  *	As the JMicron snoops for timings we don't need to do anything here.
  */
 
-static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void jmicron_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 }
 

drivers/ide/palm_bk3710.c

@@ -188,10 +188,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
 	writel(val32, base + BK3710_REGRCVR);
 }
 
-static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
+static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	int is_slave = drive->dn & 1;
-	void __iomem *base = (void *)drive->hwif->dma_base;
+	void __iomem *base = (void *)hwif->dma_base;
+	const u8 xferspeed = drive->dma_mode;
 
 	if (xferspeed >= XFER_UDMA_0) {
 		palm_bk3710_setudmamode(base, is_slave,

drivers/ide/pdc202xx_new.c

@@ -129,11 +129,11 @@ static struct udma_timing {
 	{ 0x1a, 0x01, 0xcb },	/* UDMA mode 6 */
 };
 
-static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 adj			= (drive->dn & 1) ? 0x08 : 0x00;
+	const u8 speed		= drive->dma_mode;
 
 	/*
 	 * IDE core issues SETFEATURES_XFER to the drive first (thanks to

drivers/ide/pdc202xx_old.c

@@ -21,11 +21,11 @@
 
 #define DRV_NAME "pdc202xx_old"
 
-static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
+static void pdc202xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 drive_pci		= 0x60 + (drive->dn << 2);
+	const u8 speed		= drive->dma_mode;
 
 	u8			AP = 0, BP = 0, CP = 0;
 	u8			TA = 0, TB = 0, TC = 0;
@@ -78,7 +78,8 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	pdc202xx_set_mode(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	pdc202xx_set_mode(hwif, drive);
 }
 
 static int pdc202xx_test_irq(ide_hwif_t *hwif)

drivers/ide/piix.c

@@ -127,16 +127,15 @@ static void piix_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	piix_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Set a PIIX host controller to the desired DMA mode.  This involves
  *	programming the right timing data into the PCI configuration space.
  */
 
-static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void piix_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 maslave		= hwif->channel ? 0x42 : 0x40;
 	int a_speed		= 3 << (drive->dn * 4);
@@ -147,6 +146,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	int			sitre;
 	u16			reg4042, reg4a;
 	u8			reg48, reg54, reg55;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_word(dev, maslave, &reg4042);
 	sitre = (reg4042 & 0x4000) ? 1 : 0;

drivers/ide/pmac.c

@@ -777,14 +777,14 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
 #endif	
 }
 
-static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	pmac_ide_hwif_t *pmif =
 		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	int ret = 0;
 	u32 *timings, *timings2, tl[2];
 	u8 unit = drive->dn & 1;
+	const u8 speed = drive->dma_mode;
 
 	timings = &pmif->timings[unit];
 	timings2 = &pmif->timings[unit+2];

drivers/ide/sc1200.c

@@ -122,13 +122,13 @@ out:
 	return mask;
 }
 
-static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void sc1200_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t		*hwif = drive->hwif;
 	struct pci_dev		*dev = to_pci_dev(hwif->dev);
 	unsigned int		reg, timings;
 	unsigned short		pci_clock;
 	unsigned int		basereg = hwif->channel ? 0x50 : 0x40;
+	const u8		mode = drive->dma_mode;
 
 	static const u32 udma_timing[3][3] = {
 		{ 0x00921250, 0x00911140, 0x00911030 },

drivers/ide/scc_pata.c

@@ -231,16 +231,15 @@ static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	scc_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Load the timing settings for this device mode into the
  *	controller.
  */
 
-static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct scc_ports *ports = ide_get_hwifdata(hwif);
 	unsigned long ctl_base = ports->ctl;
 	unsigned long cckctrl_port = ctl_base + 0xff0;
@@ -254,6 +253,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	int offset, idx;
 	unsigned long reg;
 	unsigned long jcactsel;
+	const u8 speed = drive->dma_mode;
 
 	reg = in_be32((void __iomem *)cckctrl_port);
 	if (reg & CCKCTRL_ATACLKOEN) {

drivers/ide/serverworks.c

@@ -128,14 +128,14 @@ static void svwks_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	}
 }
 
-static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void svwks_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static const u8 udma_modes[]		= { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
 	static const u8 dma_modes[]		= { 0x77, 0x21, 0x20 };
 	static const u8 drive_pci2[]		= { 0x45, 0x44, 0x47, 0x46 };
 
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	const u8 speed		= drive->dma_mode;
 	u8 unit			= drive->dn & 1;
 
 	u8 ultra_enable	 = 0, ultra_timing = 0, dma_timing = 0;

drivers/ide/sgiioc4.c

@@ -255,7 +255,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive)
 	return dma_stat;
 }
 
-static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 }
 

drivers/ide/siimage.c

@@ -289,19 +289,18 @@ static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	sil_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Tune the SiI chipset for the desired DMA mode.
  */
 
-static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sil_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
 	static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
 	static const u16 dma[]	 = { 0x2208, 0x10C2, 0x10C1 };
 
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	unsigned long base	= (unsigned long)hwif->hwif_data;
 	u16 ultra = 0, multi	= 0;
@@ -311,6 +310,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
 						: (mmio ? 0xB4 : 0x80);
 	unsigned long ma	= siimage_seldev(drive, 0x08);
 	unsigned long ua	= siimage_seldev(drive, 0x0C);
+	const u8 speed		= drive->dma_mode;
 
 	scsc  = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
 	mode  = sil_ioread8 (dev, base + addr_mask);

drivers/ide/sis5513.c

@@ -340,8 +340,10 @@ static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
 		sis_ata33_program_udma_timings(drive, mode);
 }
 
-static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
+	const u8 speed = drive->dma_mode;
+
 	if (speed >= XFER_UDMA_0)
 		sis_program_udma_timings(drive, speed);
 	else

drivers/ide/sl82c105.c

@@ -92,11 +92,12 @@ static void sl82c105_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 /*
  * Configure the chipset for DMA mode.
  */
-static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sl82c105_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
 	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u16 drv_ctrl;
+	const u8 speed = drive->dma_mode;
 
 	drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
 

drivers/ide/slc90e66.c

@@ -72,14 +72,14 @@ static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	spin_unlock_irqrestore(&slc90e66_lock, flags);
 }
 
-static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 maslave		= hwif->channel ? 0x42 : 0x40;
 	int sitre = 0, a_speed	= 7 << (drive->dn * 4);
 	int u_speed = 0, u_flag = 1 << drive->dn;
 	u16			reg4042, reg44, reg48, reg4a;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_word(dev, maslave, &reg4042);
 	sitre = (reg4042 & 0x4000) ? 1 : 0;

drivers/ide/tc86c001.c

@@ -13,11 +13,11 @@
 
 #define DRV_NAME "tc86c001"
 
-static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
+static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	unsigned long scr_port	= hwif->config_data + (drive->dn ? 0x02 : 0x00);
 	u16 mode, scr		= inw(scr_port);
+	const u8 speed		= drive->dma_mode;
 
 	switch (speed) {
 	case XFER_UDMA_4:	mode = 0x00c0; break;
@@ -43,7 +43,8 @@ static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	tc86c001_set_mode(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	tc86c001_set_mode(hwif, drive);
 }
 
 /*

drivers/ide/triflex.c

@@ -34,9 +34,8 @@
 
 #define DRV_NAME "triflex"
 
-static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
+static void triflex_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u32 triflex_timings = 0;
 	u16 timing = 0;
@@ -44,7 +43,7 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 
 	pci_read_config_dword(dev, channel_offset, &triflex_timings);
 
-	switch(speed) {
+	switch (drive->dma_mode) {
 		case XFER_MW_DMA_2:
 			timing = 0x0103; 
 			break;
@@ -84,7 +83,8 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	triflex_set_mode(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	triflex_set_mode(hwif, drive);
 }
 
 static const struct ide_port_ops triflex_port_ops = {

drivers/ide/tx4939ide.c

@@ -125,10 +125,10 @@ static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	/* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */
 }
 
-static void tx4939ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void tx4939ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	u32 mask, val;
+	const u8 mode = drive->dma_mode;
 
 	/* Update Data Transfer Mode for this drive. */
 	if (mode >= XFER_UDMA_0)

drivers/ide/via82cxxx.c

@@ -169,22 +169,22 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
 
 /**
  *	via_set_drive		-	configure transfer mode
+ *	@hwif: port
  *	@drive: Drive to set up
- *	@speed: desired speed
  *
  *	via_set_drive() computes timing values configures the chipset to
  *	a desired transfer mode.  It also can be called by upper layers.
  */
 
-static void via_set_drive(ide_drive_t *drive, const u8 speed)
+static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *peer = ide_get_pair_dev(drive);
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	struct ide_host *host = pci_get_drvdata(dev);
 	struct via82cxxx_dev *vdev = host->host_priv;
 	struct ide_timing t, p;
 	unsigned int T, UT;
+	const u8 speed = drive->dma_mode;
 
 	T = 1000000000 / via_clock;
 
@@ -216,7 +216,8 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed)
 
 static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	via_set_drive(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	via_set_drive(hwif, drive);
 }
 
 static struct via_isa_bridge *via_config_find(struct pci_dev **isa)

include/linux/ide.h

@@ -625,7 +625,7 @@ extern const struct ide_tp_ops default_tp_ops;
 struct ide_port_ops {
 	void	(*init_dev)(ide_drive_t *);
 	void	(*set_pio_mode)(struct hwif_s *, ide_drive_t *);
-	void	(*set_dma_mode)(ide_drive_t *, const u8);
+	void	(*set_dma_mode)(struct hwif_s *, ide_drive_t *);
 	int	(*reset_poll)(ide_drive_t *);
 	void	(*pre_reset)(ide_drive_t *);
 	void	(*resetproc)(ide_drive_t *);