Merge branch 'next-samsung-cleanup-2' into next-samsung-devel-2

Conflicts:
	arch/arm/plat-s5p/include/plat/pll.h

arch/arm/mach-exynos4/include/mach/clkdev.h

@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif

arch/arm/mach-exynos4/setup-sdhci.c

@@ -10,16 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -29,41 +20,3 @@ char *exynos4_hsmmc_clksrcs[4] = {
 	[2] = "sclk_mmc",	/* mmc_bus */
 	[3] = NULL,
 };
-
-void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
-				  struct mmc_ios *ios, struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-
-	/* select base clock source to HCLK */
-
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-
-	/*
-	 * clear async mode, enable conflict mask, rx feedback ctrl, SD
-	 * clk hold and no use debounce count
-	 */
-
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	/* Tx and Rx feedback clock delay control */
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}

arch/arm/mach-s3c2410/mach-h1940.c

@@ -696,9 +696,9 @@ static void __init h1940_init(void)
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	tmp =   (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
-	      | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
-	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
+	tmp =   (0x78 << S3C24XX_PLL_MDIV_SHIFT)
+	      | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
+	      | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
 	gpio_request(S3C2410_GPC(0), "LCD power");

arch/arm/mach-s3c2416/clock.c

@@ -21,7 +21,6 @@
 #include <plat/cpu.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/pll6553x.h>
 #include <plat/pll.h>
 
 #include <asm/mach/map.h>

arch/arm/mach-s3c2416/setup-sdhci.c

@@ -12,17 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -32,30 +22,3 @@ char *s3c2416_hsmmc_clksrcs[4] = {
 	[2] = "hsmmc-if",
 	/* [3] = "48m", - note not successfully used yet */
 };
-
-void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	__raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	__raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}

arch/arm/mach-s3c64xx/clock.c

@@ -25,13 +25,13 @@
 
 #include <mach/regs-sys.h>
 #include <mach/regs-clock.h>
-#include <mach/pll.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
+#include <plat/pll.h>
 
 /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
  * ext_xtal_mux for want of an actual name from the manual.
@@ -735,7 +735,8 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	/* For now assume the mux always selects the crystal */
 	clk_ext_xtal_mux.parent = xtal_clk;
 
-	epll = s3c6400_get_epll(xtal);
+	epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
+				__raw_readl(S3C_EPLL_CON1));
 	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
 	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
 

arch/arm/mach-s3c64xx/cpu.c

@@ -33,8 +33,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
 
 /* table of supported CPUs */
 

arch/arm/mach-s3c64xx/include/mach/clkdev.h

@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif

arch/arm/mach-s3c64xx/include/mach/pll.h

@@ -1,45 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C6400_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
-#define S3C6400_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
-#define S3C6400_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
-#define S3C6400_PLL_MDIV_SHIFT	(16)
-#define S3C6400_PLL_PDIV_SHIFT	(8)
-#define S3C6400_PLL_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-#include <plat/pll6553x.h>
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
-{
-	return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
-				__raw_readl(S3C_EPLL_CON1));
-}

arch/arm/mach-s3c64xx/include/mach/pwm-clock.h

@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK

arch/arm/mach-s3c64xx/mach-anw6410.c

@@ -45,7 +45,7 @@
 #include <plat/fb.h>
 #include <plat/regs-fb-v4.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -43,7 +43,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/s3c6410.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
@@ -51,6 +50,7 @@
 
 #include <mach/regs-gpio-memport.h>
 
+#include <plat/s3c6410.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>

arch/arm/mach-s3c64xx/mach-hmt.c

@@ -37,7 +37,7 @@
 #include <plat/fb.h>
 #include <plat/nand.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -32,8 +32,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>

arch/arm/mach-s3c64xx/mach-ncp.c

@@ -39,7 +39,7 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -33,8 +33,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>

arch/arm/mach-s3c64xx/mach-smartq5.c

@@ -22,8 +22,8 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>

arch/arm/mach-s3c64xx/mach-smartq7.c

@@ -22,8 +22,8 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>

arch/arm/mach-s3c64xx/mach-smdk6400.c

@@ -31,7 +31,7 @@
 
 #include <plat/regs-serial.h>
 
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -63,7 +63,7 @@
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/s3c6400.c

@@ -38,7 +38,7 @@
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
 
 void __init s3c6400_map_io(void)
 {

arch/arm/mach-s3c64xx/s3c6410.c

@@ -41,8 +41,8 @@
 #include <plat/adc-core.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
 
 void __init s3c6410_map_io(void)
 {

arch/arm/mach-s3c64xx/setup-sdhci.c

@@ -12,17 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -32,41 +22,3 @@ char *s3c64xx_hsmmc_clksrcs[4] = {
 	[2] = "mmc_bus",
 	/* [3] = "48m", - note not successfully used yet */
 };
-
-void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
-void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
-}

arch/arm/mach-s5p64x0/include/mach/clkdev.h

@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif

arch/arm/mach-s5p64x0/include/mach/pwm-clock.h

@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S5P64X0 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return 0;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK 0
-
-#endif /* __ASM_ARCH_PWMCLK_H */

arch/arm/mach-s5pc100/include/mach/clkdev.h

@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif

arch/arm/mach-s5pc100/include/mach/pwm-clock.h

@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - pwm clock and timer support
- *
- * Based on mach-s3c6400/include/mach/pwm-clock.h
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK

arch/arm/mach-s5pc100/setup-sdhci.c

@@ -11,17 +11,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -31,35 +21,3 @@ char *s5pc100_hsmmc_clksrcs[4] = {
 	[2] = "sclk_mmc",	/* mmc_bus */
 	/* [3] = "48m",		- note not successfully used yet */
 };
-
-
-void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}

arch/arm/mach-s5pv210/include/mach/clkdev.h

@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif

arch/arm/mach-s5pv210/include/mach/pwm-clock.h

@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5PV210 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */

arch/arm/mach-s5pv210/setup-sdhci.c

@@ -10,17 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -30,34 +20,3 @@ char *s5pv210_hsmmc_clksrcs[4] = {
 	[2] = "sclk_mmc",	/* mmc_bus */
 	/* [3] = NULL,		- reserved */
 };
-
-void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}

arch/arm/plat-s3c24xx/include/mach/clkdev.h

@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif

arch/arm/plat-s3c24xx/include/mach/pwm-clock.h

@@ -1,55 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg == S3C2410_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << (1 + tcfg1);
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 0;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div) - 1;
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK

arch/arm/plat-s3c24xx/include/plat/pll.h

@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - common pll registers and code
- */
-
-#define S3C24XX_PLLCON_MDIVSHIFT	12
-#define S3C24XX_PLLCON_PDIVSHIFT	4
-#define S3C24XX_PLLCON_SDIVSHIFT	0
-#define S3C24XX_PLLCON_MDIVMASK		((1<<(1+(19-12)))-1)
-#define S3C24XX_PLLCON_PDIVMASK		((1<<5)-1)
-#define S3C24XX_PLLCON_SDIVMASK		3
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C24XX_PLLCON_MDIVMASK;
-	pdiv &= S3C24XX_PLLCON_PDIVMASK;
-	sdiv &= S3C24XX_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#define S3C2416_PLL_M_SHIFT	(14)
-#define S3C2416_PLL_P_SHIFT	(5)
-#define S3C2416_PLL_S_MASK	(7)
-#define S3C2416_PLL_M_MASK	((1 << 10) - 1)
-#define S3C2416_PLL_P_MASK	(63)
-
-static inline unsigned int
-s3c2416_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int m, p, s;
-	uint64_t fvco;
-
-	m = pllval >> S3C2416_PLL_M_SHIFT;
-	p = pllval >> S3C2416_PLL_P_SHIFT;
-
-	s = pllval & S3C2416_PLL_S_MASK;
-	m &= S3C2416_PLL_M_MASK;
-	p &= S3C2416_PLL_P_MASK;
-
-	fvco = (uint64_t)baseclk * m;
-	do_div(fvco, (p << s));
-
-	return (unsigned int)fvco;
-}

arch/arm/plat-s3c24xx/include/plat/regs-iis.h

@@ -1,68 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_IIS_H
-#define __ASM_ARCH_REGS_IIS_H
-
-#define S3C2410_IISCON	 (0x00)
-
-#define S3C2410_IISCON_LRINDEX	  (1<<8)
-#define S3C2410_IISCON_TXFIFORDY  (1<<7)
-#define S3C2410_IISCON_RXFIFORDY  (1<<6)
-#define S3C2410_IISCON_TXDMAEN	  (1<<5)
-#define S3C2410_IISCON_RXDMAEN	  (1<<4)
-#define S3C2410_IISCON_TXIDLE	  (1<<3)
-#define S3C2410_IISCON_RXIDLE	  (1<<2)
-#define S3C2410_IISCON_PSCEN	  (1<<1)
-#define S3C2410_IISCON_IISEN	  (1<<0)
-
-#define S3C2410_IISMOD	 (0x04)
-
-#define S3C2440_IISMOD_MPLL	  (1<<9)
-#define S3C2410_IISMOD_SLAVE	  (1<<8)
-#define S3C2410_IISMOD_NOXFER	  (0<<6)
-#define S3C2410_IISMOD_RXMODE	  (1<<6)
-#define S3C2410_IISMOD_TXMODE	  (2<<6)
-#define S3C2410_IISMOD_TXRXMODE	  (3<<6)
-#define S3C2410_IISMOD_LR_LLOW	  (0<<5)
-#define S3C2410_IISMOD_LR_RLOW	  (1<<5)
-#define S3C2410_IISMOD_IIS	  (0<<4)
-#define S3C2410_IISMOD_MSB	  (1<<4)
-#define S3C2410_IISMOD_8BIT	  (0<<3)
-#define S3C2410_IISMOD_16BIT	  (1<<3)
-#define S3C2410_IISMOD_BITMASK	  (1<<3)
-#define S3C2410_IISMOD_256FS	  (0<<2)
-#define S3C2410_IISMOD_384FS	  (1<<2)
-#define S3C2410_IISMOD_16FS	  (0<<0)
-#define S3C2410_IISMOD_32FS	  (1<<0)
-#define S3C2410_IISMOD_48FS	  (2<<0)
-#define S3C2410_IISMOD_FS_MASK	  (3<<0)
-
-#define S3C2410_IISPSR		(0x08)
-#define S3C2410_IISPSR_INTMASK	(31<<5)
-#define S3C2410_IISPSR_INTSHIFT	(5)
-#define S3C2410_IISPSR_EXTMASK	(31<<0)
-#define S3C2410_IISPSR_EXTSHFIT	(0)
-
-#define S3C2410_IISFCON  (0x0c)
-
-#define S3C2410_IISFCON_TXDMA	  (1<<15)
-#define S3C2410_IISFCON_RXDMA	  (1<<14)
-#define S3C2410_IISFCON_TXENABLE  (1<<13)
-#define S3C2410_IISFCON_RXENABLE  (1<<12)
-#define S3C2410_IISFCON_TXMASK	  (0x3f << 6)
-#define S3C2410_IISFCON_TXSHIFT	  (6)
-#define S3C2410_IISFCON_RXMASK	  (0x3f)
-#define S3C2410_IISFCON_RXSHIFT	  (0)
-
-#define S3C2410_IISFIFO  (0x10)
-#endif /* __ASM_ARCH_REGS_IIS_H */

arch/arm/plat-s3c24xx/include/plat/regs-spi.h

@@ -1,81 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
- *
- * Copyright (c) 2004 Fetron GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 SPI register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1	(0x20)
-#define S3C2412_SPI1	(0x100)
-
-#define S3C2410_SPCON	(0x00)
-
-#define S3C2412_SPCON_RXFIFO_RB2	(0<<14)
-#define S3C2412_SPCON_RXFIFO_RB4	(1<<14)
-#define S3C2412_SPCON_RXFIFO_RB12	(2<<14)
-#define S3C2412_SPCON_RXFIFO_RB14	(3<<14)
-#define S3C2412_SPCON_TXFIFO_RB2	(0<<12)
-#define S3C2412_SPCON_TXFIFO_RB4	(1<<12)
-#define S3C2412_SPCON_TXFIFO_RB12	(2<<12)
-#define S3C2412_SPCON_TXFIFO_RB14	(3<<12)
-#define S3C2412_SPCON_RXFIFO_RESET	(1<<11) /* RxFIFO reset */
-#define S3C2412_SPCON_TXFIFO_RESET	(1<<10) /* TxFIFO reset */
-#define S3C2412_SPCON_RXFIFO_EN		(1<<9)  /* RxFIFO Enable */
-#define S3C2412_SPCON_TXFIFO_EN		(1<<8)  /* TxFIFO Enable */
-
-#define S3C2412_SPCON_DIRC_RX	  (1<<7)
-
-#define S3C2410_SPCON_SMOD_DMA	  (2<<5)	/* DMA mode */
-#define S3C2410_SPCON_SMOD_INT	  (1<<5)	/* interrupt mode */
-#define S3C2410_SPCON_SMOD_POLL   (0<<5)	/* polling mode */
-#define S3C2410_SPCON_ENSCK	  (1<<4)	/* Enable SCK */
-#define S3C2410_SPCON_MSTR	  (1<<3)	/* Master/Slave select
-						   0: slave, 1: master */
-#define S3C2410_SPCON_CPOL_HIGH	  (1<<2)	/* Clock polarity select */
-#define S3C2410_SPCON_CPOL_LOW	  (0<<2)	/* Clock polarity select */
-
-#define S3C2410_SPCON_CPHA_FMTB	  (1<<1)	/* Clock Phase Select */
-#define S3C2410_SPCON_CPHA_FMTA	  (0<<1)	/* Clock Phase Select */
-
-#define S3C2410_SPCON_TAGD	  (1<<0)	/* Tx auto garbage data mode */
-
-
-#define S3C2410_SPSTA	 (0x04)
-
-#define S3C2412_SPSTA_RXFIFO_AE		(1<<11)
-#define S3C2412_SPSTA_TXFIFO_AE		(1<<10)
-#define S3C2412_SPSTA_RXFIFO_ERROR	(1<<9)
-#define S3C2412_SPSTA_TXFIFO_ERROR	(1<<8)
-#define S3C2412_SPSTA_RXFIFO_FIFO	(1<<7)
-#define S3C2412_SPSTA_RXFIFO_EMPTY	(1<<6)
-#define S3C2412_SPSTA_TXFIFO_NFULL	(1<<5)
-#define S3C2412_SPSTA_TXFIFO_EMPTY	(1<<4)
-
-#define S3C2410_SPSTA_DCOL	  (1<<2)	/* Data Collision Error */
-#define S3C2410_SPSTA_MULD	  (1<<1)	/* Multi Master Error */
-#define S3C2410_SPSTA_READY	  (1<<0)	/* Data Tx/Rx ready */
-#define S3C2412_SPSTA_READY_ORG	  (1<<3)
-
-#define S3C2410_SPPIN	 (0x08)
-
-#define S3C2410_SPPIN_ENMUL	  (1<<2)	/* Multi Master Error detect */
-#define S3C2410_SPPIN_RESERVED	  (1<<1)
-#define S3C2410_SPPIN_KEEP	  (1<<0)	/* Master Out keep */
-
-#define S3C2410_SPPRE	 (0x0C)
-#define S3C2410_SPTDAT	 (0x10)
-#define S3C2410_SPRDAT	 (0x14)
-
-#define S3C2412_TXFIFO	 (0x18)
-#define S3C2412_RXFIFO	 (0x18)
-#define S3C2412_SPFIC	 (0x24)
-
-
-#endif /* __ASM_ARCH_REGS_SPI_H */

arch/arm/plat-s3c24xx/include/plat/audio-simtec.h → arch/arm/plat-samsung/include/plat/audio-simtec.h

@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
+/* arch/arm/plat-samsung/include/plat/audio-simtec.h
  *
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/

arch/arm/plat-s5p/include/plat/camport.h → arch/arm/plat-samsung/include/plat/camport.h

@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef PLAT_S5P_CAMPORT_H_
-#define PLAT_S5P_CAMPORT_H_ __FILE__
+#ifndef __PLAT_SAMSUNG_CAMPORT_H_
+#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
 
 enum s5p_camport_id {
 	S5P_CAMPORT_A,
@@ -25,4 +25,4 @@ enum s5p_camport_id {
 int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
 int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
 
-#endif
+#endif /* __PLAT_SAMSUNG_CAMPORT_H */

arch/arm/plat-s3c24xx/include/plat/common-smdk.h → arch/arm/plat-samsung/include/plat/common-smdk.h

@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
+/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>

arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h → arch/arm/plat-samsung/include/plat/cpu-freq-core.h

@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h
  *
  * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -195,7 +195,8 @@ struct s3c_cpufreq_info {
 
 extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
 
-extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no);
 
 /* exports and utilities for debugfs */
 extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);

arch/arm/plat-s5p/include/plat/ehci.h → arch/arm/plat-samsung/include/plat/ehci.h

@@ -8,8 +8,8 @@
  * option) any later version.
  */
 
-#ifndef __PLAT_S5P_EHCI_H
-#define __PLAT_S5P_EHCI_H
+#ifndef __PLAT_SAMSUNG_EHCI_H
+#define __PLAT_SAMSUNG_EHCI_H __FILE__
 
 struct s5p_ehci_platdata {
 	int (*phy_init)(struct platform_device *pdev, int type);
@@ -18,4 +18,4 @@ struct s5p_ehci_platdata {
 
 extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
 
-#endif /* __PLAT_S5P_EHCI_H */
+#endif /* __PLAT_SAMSUNG_EHCI_H */

arch/arm/plat-s5p/include/plat/exynos4.h → arch/arm/plat-samsung/include/plat/exynos4.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/exynos4.h
+/* linux/arch/arm/plat-samsung/include/plat/exynos4.h
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com

arch/arm/plat-s3c24xx/include/plat/fiq.h → arch/arm/plat-samsung/include/plat/fiq.h

@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+/* linux/arch/arm/plat-samsung/include/plat/fiq.h
  *
  * Copyright (c) 2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>

arch/arm/plat-s3c24xx/include/plat/irq.h → arch/arm/plat-samsung/include/plat/irq.h

@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/irq.h
+/* linux/arch/arm/plat-samsung/include/plat/irq.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -25,9 +25,9 @@
 extern struct irq_chip s3c_irq_level_chip;
 extern struct irq_chip s3c_irq_chip;
 
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
-		int subcheck)
+static inline void s3c_irqsub_mask(unsigned int irqno,
+				   unsigned int parentbit,
+				   int subcheck)
 {
 	unsigned long mask;
 	unsigned long submask;
@@ -39,17 +39,16 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
 
 	/* check to see if we need to mask the parent IRQ */
 
-	if ((submask  & subcheck) == subcheck) {
+	if ((submask  & subcheck) == subcheck)
 		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-	}
 
 	/* write back masks */
 	__raw_writel(submask, S3C2410_INTSUBMSK);
 
 }
 
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+static inline void s3c_irqsub_unmask(unsigned int irqno,
+				     unsigned int parentbit)
 {
 	unsigned long mask;
 	unsigned long submask;
@@ -66,8 +65,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
 }
 
 
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+static inline void s3c_irqsub_maskack(unsigned int irqno,
+				      unsigned int parentmask,
+				      unsigned int group)
 {
 	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
 
@@ -86,8 +86,9 @@ s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int gro
 	}
 }
 
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+static inline void s3c_irqsub_ack(unsigned int irqno,
+				  unsigned int parentmask,
+				  unsigned int group)
 {
 	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
 

arch/arm/plat-s5p/include/plat/irqs.h → arch/arm/plat-samsung/include/plat/irqs.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/irqs.h
+/* linux/arch/arm/plat-samsung/include/plat/irqs.h
  *
  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
@@ -10,8 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_S5P_IRQS_H
-#define __ASM_PLAT_S5P_IRQS_H __FILE__
+#ifndef __PLAT_SAMSUNG_IRQS_H
+#define __PLAT_SAMSUNG_IRQS_H __FILE__
 
 /* we keep the first set of CPU IRQs out of the range of
  * the ISA space, so that the PC104 has them to itself
@@ -112,4 +112,4 @@
 #define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
 #define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
 
-#endif /* __ASM_PLAT_S5P_IRQS_H */
+#endif /* __PLAT_SAMSUNG_IRQS_H */

arch/arm/plat-s3c24xx/include/plat/mci.h → arch/arm/plat-samsung/include/plat/mci.h

@@ -27,11 +27,11 @@
  * to a non-zero value, otherwise the default of 3.2-3.4V is used.
  */
 struct s3c24xx_mci_pdata {
-	unsigned int	no_wprotect : 1;
-	unsigned int	no_detect : 1;
-	unsigned int	wprotect_invert : 1;
-	unsigned int	detect_invert : 1;   /* set => detect active high. */
-	unsigned int	use_dma : 1;
+	unsigned int	no_wprotect:1;
+	unsigned int	no_detect:1;
+	unsigned int	wprotect_invert:1;
+	unsigned int	detect_invert:1;	/* set => detect active high */
+	unsigned int	use_dma:1;
 
 	unsigned int	gpio_detect;
 	unsigned int	gpio_wprotect;

arch/arm/plat-s5p/include/plat/mfc.h → arch/arm/plat-samsung/include/plat/mfc.h

@@ -7,8 +7,8 @@
  * option) any later version.
  */
 
-#ifndef __PLAT_S5P_MFC_H
-#define __PLAT_S5P_MFC_H
+#ifndef __PLAT_SAMSUNG_MFC_H
+#define __PLAT_SAMSUNG_MFC_H __FILE__
 
 /**
  * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
@@ -24,4 +24,4 @@
 void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
 				phys_addr_t lbase, unsigned int lsize);
 
-#endif /* __PLAT_S5P_MFC_H */
+#endif /* __PLAT_SAMSUNG_MFC_H */

arch/arm/plat-s5p/include/plat/mipi_csis.h → arch/arm/plat-samsung/include/plat/mipi_csis.h

@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef PLAT_S5P_MIPI_CSIS_H_
-#define PLAT_S5P_MIPI_CSIS_H_ __FILE__
+#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
+#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
 
 struct platform_device;
 
@@ -40,4 +40,4 @@ struct s5p_platform_mipi_csis {
  */
 int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
 
-#endif /* PLAT_S5P_MIPI_CSIS_H_ */
+#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */

arch/arm/plat-s5p/include/plat/pll.h → arch/arm/plat-samsung/include/plat/pll.h

@@ -1,11 +1,14 @@
-/* arch/arm/plat-s5p/include/plat/pll.h
+/* linux/arch/arm/plat-samsung/include/plat/pll.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
- * S5P PLL code
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
- * Based on arch/arm/plat-s3c64xx/include/plat/pll.h
+ * Samsung PLL codes
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,6 +17,111 @@
 
 #include <asm/div64.h>
 
+#define S3C24XX_PLL_MDIV_MASK		(0xFF)
+#define S3C24XX_PLL_PDIV_MASK		(0x1F)
+#define S3C24XX_PLL_SDIV_MASK		(0x3)
+#define S3C24XX_PLL_MDIV_SHIFT		(12)
+#define S3C24XX_PLL_PDIV_SHIFT		(4)
+#define S3C24XX_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned int s3c24xx_get_pll(unsigned int pllval,
+					   unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK;
+	pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK;
+	sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#define S3C2416_PLL_MDIV_MASK		(0x3FF)
+#define S3C2416_PLL_PDIV_MASK		(0x3F)
+#define S3C2416_PLL_SDIV_MASK		(0x7)
+#define S3C2416_PLL_MDIV_SHIFT		(14)
+#define S3C2416_PLL_PDIV_SHIFT		(5)
+#define S3C2416_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned int s3c2416_get_pll(unsigned int pllval,
+					   unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK;
+	pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK;
+	sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK;
+
+	fvco = (uint64_t)baseclk * mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned int)fvco;
+}
+
+#define S3C6400_PLL_MDIV_MASK		(0x3FF)
+#define S3C6400_PLL_PDIV_MASK		(0x3F)
+#define S3C6400_PLL_SDIV_MASK		(0x7)
+#define S3C6400_PLL_MDIV_SHIFT		(16)
+#define S3C6400_PLL_PDIV_SHIFT		(8)
+#define S3C6400_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL6553X_MDIV_MASK	(0x7F)
+#define PLL6553X_PDIV_MASK	(0x1F)
+#define PLL6553X_SDIV_MASK	(0x3)
+#define PLL6553X_KDIV_MASK	(0xFFFF)
+#define PLL6553X_MDIV_SHIFT	(16)
+#define PLL6553X_PDIV_SHIFT	(8)
+#define PLL6553X_SDIV_SHIFT	(0)
+
+static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
+					     u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
+	kdiv = pll_con1 & PLL6553X_KDIV_MASK;
+
+	/*
+	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
 #define PLL35XX_MDIV_MASK	(0x3FF)
 #define PLL35XX_PDIV_MASK	(0x3F)
 #define PLL35XX_SDIV_MASK	(0x7)
@@ -132,6 +240,7 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
 	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
 	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
 	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
 
 	if (pll_type == pll_4650c)
 		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
@@ -175,7 +284,8 @@ static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
 	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
 	kdiv = pll_conk & PLL90XX_KDIV_MASK;
 
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
+	/*
+	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
 	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
 	 * add kdiv before multiplying. The use of tmp is to avoid any
 	 * overflows before shifting bac down into result when multipling

arch/arm/plat-samsung/include/plat/pll6553x.h

@@ -1,51 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/pll6553x.h
- *	partially from arch/arm/mach-s3c64xx/include/mach/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung PLL6553x PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* S3C6400 and compatible (S3C2416, etc.) EPLL code */
-
-#define PLL6553X_MDIV_MASK	((1 << (23-16)) - 1)
-#define PLL6553X_PDIV_MASK	((1 << (13-8)) - 1)
-#define PLL6553X_SDIV_MASK	((1 << (2-0)) - 1)
-#define PLL6553X_MDIV_SHIFT	(16)
-#define PLL6553X_PDIV_SHIFT	(8)
-#define PLL6553X_SDIV_SHIFT	(0)
-#define PLL6553X_KDIV_MASK	(0xffff)
-
-static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
-					     u32 pll0, u32 pll1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
-	pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
-	sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
-	kdiv = pll1 & PLL6553X_KDIV_MASK;
-
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}

arch/arm/mach-exynos4/include/mach/pwm-clock.h → arch/arm/plat-samsung/include/plat/pwm-clock.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h
+/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -8,17 +8,15 @@
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * EXYNOS4 - pwm clock and timer support
+ * SAMSUNG - pwm clock and timer support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
+#ifndef __ASM_PLAT_PWM_CLOCK_H
+#define __ASM_PLAT_PWM_CLOCK_H __FILE__
 
 /**
  * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
@@ -29,7 +27,14 @@
  */
 static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
 {
-	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+	if (soc_is_s3c24xx())
+		return tcfg == S3C2410_TCFG1_MUX_TCLK;
+	else if (soc_is_s3c64xx() || soc_is_s5pc100())
+		return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+	else if (soc_is_s5p6440() || soc_is_s5p6450())
+		return 0;
+	else
+		return tcfg == S3C64XX_TCFG1_MUX_TCLK;
 }
 
 /**
@@ -41,7 +46,10 @@ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
  */
 static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
 {
-	return 1 << tcfg1;
+	if (soc_is_s3c24xx())
+		return 1 << (tcfg1 + 1);
+	else
+		return 1 << tcfg1;
 }
 
 /**
@@ -51,7 +59,10 @@ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
  */
 static inline unsigned int pwm_tdiv_has_div1(void)
 {
-	return 1;
+	if (soc_is_s3c24xx())
+		return 0;
+	else
+		return 1;
 }
 
 /**
@@ -62,9 +73,9 @@ static inline unsigned int pwm_tdiv_has_div1(void)
  */
 static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
 {
-	return ilog2(div);
+	if (soc_is_s3c24xx())
+		return ilog2(div) - 1;
+	else
+		return ilog2(div);
 }
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
+#endif /* __ASM_PLAT_PWM_CLOCK_H */

arch/arm/plat-s3c24xx/include/plat/regs-dma.h → arch/arm/plat-samsung/include/plat/regs-dma.h

@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/dma.h
+/* arch/arm/plat-samsung/include/plat/regs-dma.h
  *
  * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -10,7 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-/* DMA Register definitions */
+#ifndef __ASM_PLAT_REGS_DMA_H
+#define __ASM_PLAT_REGS_DMA_H __FILE__
 
 #define S3C2410_DMA_DISRC		(0x00)
 #define S3C2410_DMA_DISRCC		(0x04)
@@ -24,74 +25,75 @@
 #define S3C2412_DMA_DMAREQSEL		(0x24)
 #define S3C2443_DMA_DMAREQSEL		(0x24)
 
-#define S3C2410_DISRCC_INC		(1<<0)
-#define S3C2410_DISRCC_APB		(1<<1)
+#define S3C2410_DISRCC_INC		(1 << 0)
+#define S3C2410_DISRCC_APB		(1 << 1)
 
-#define S3C2410_DMASKTRIG_STOP		(1<<2)
-#define S3C2410_DMASKTRIG_ON		(1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG	(1<<0)
+#define S3C2410_DMASKTRIG_STOP		(1 << 2)
+#define S3C2410_DMASKTRIG_ON		(1 << 1)
+#define S3C2410_DMASKTRIG_SWTRIG	(1 << 0)
 
-#define S3C2410_DCON_DEMAND		(0<<31)
-#define S3C2410_DCON_HANDSHAKE		(1<<31)
-#define S3C2410_DCON_SYNC_PCLK		(0<<30)
-#define S3C2410_DCON_SYNC_HCLK		(1<<30)
+#define S3C2410_DCON_DEMAND		(0 << 31)
+#define S3C2410_DCON_HANDSHAKE		(1 << 31)
+#define S3C2410_DCON_SYNC_PCLK		(0 << 30)
+#define S3C2410_DCON_SYNC_HCLK		(1 << 30)
 
-#define S3C2410_DCON_INTREQ		(1<<29)
+#define S3C2410_DCON_INTREQ		(1 << 29)
 
-#define S3C2410_DCON_CH0_XDREQ0		(0<<24)
-#define S3C2410_DCON_CH0_UART0		(1<<24)
-#define S3C2410_DCON_CH0_SDI		(2<<24)
-#define S3C2410_DCON_CH0_TIMER		(3<<24)
-#define S3C2410_DCON_CH0_USBEP1		(4<<24)
+#define S3C2410_DCON_CH0_XDREQ0		(0 << 24)
+#define S3C2410_DCON_CH0_UART0		(1 << 24)
+#define S3C2410_DCON_CH0_SDI		(2 << 24)
+#define S3C2410_DCON_CH0_TIMER		(3 << 24)
+#define S3C2410_DCON_CH0_USBEP1		(4 << 24)
 
-#define S3C2410_DCON_CH1_XDREQ1		(0<<24)
-#define S3C2410_DCON_CH1_UART1		(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI		(2<<24)
-#define S3C2410_DCON_CH1_SPI		(3<<24)
-#define S3C2410_DCON_CH1_USBEP2		(4<<24)
+#define S3C2410_DCON_CH1_XDREQ1		(0 << 24)
+#define S3C2410_DCON_CH1_UART1		(1 << 24)
+#define S3C2410_DCON_CH1_I2SSDI		(2 << 24)
+#define S3C2410_DCON_CH1_SPI		(3 << 24)
+#define S3C2410_DCON_CH1_USBEP2		(4 << 24)
 
-#define S3C2410_DCON_CH2_I2SSDO		(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI		(1<<24)
-#define S3C2410_DCON_CH2_SDI		(2<<24)
-#define S3C2410_DCON_CH2_TIMER		(3<<24)
-#define S3C2410_DCON_CH2_USBEP3		(4<<24)
+#define S3C2410_DCON_CH2_I2SSDO		(0 << 24)
+#define S3C2410_DCON_CH2_I2SSDI		(1 << 24)
+#define S3C2410_DCON_CH2_SDI		(2 << 24)
+#define S3C2410_DCON_CH2_TIMER		(3 << 24)
+#define S3C2410_DCON_CH2_USBEP3		(4 << 24)
 
-#define S3C2410_DCON_CH3_UART2		(0<<24)
-#define S3C2410_DCON_CH3_SDI		(1<<24)
-#define S3C2410_DCON_CH3_SPI		(2<<24)
-#define S3C2410_DCON_CH3_TIMER		(3<<24)
-#define S3C2410_DCON_CH3_USBEP4		(4<<24)
+#define S3C2410_DCON_CH3_UART2		(0 << 24)
+#define S3C2410_DCON_CH3_SDI		(1 << 24)
+#define S3C2410_DCON_CH3_SPI		(2 << 24)
+#define S3C2410_DCON_CH3_TIMER		(3 << 24)
+#define S3C2410_DCON_CH3_USBEP4		(4 << 24)
 
 #define S3C2410_DCON_SRCSHIFT		(24)
-#define S3C2410_DCON_SRCMASK		(7<<24)
+#define S3C2410_DCON_SRCMASK		(7 << 24)
 
-#define S3C2410_DCON_BYTE		(0<<20)
-#define S3C2410_DCON_HALFWORD		(1<<20)
-#define S3C2410_DCON_WORD		(2<<20)
+#define S3C2410_DCON_BYTE		(0 << 20)
+#define S3C2410_DCON_HALFWORD		(1 << 20)
+#define S3C2410_DCON_WORD		(2 << 20)
 
-#define S3C2410_DCON_AUTORELOAD		(0<<22)
-#define S3C2410_DCON_NORELOAD		(1<<22)
-#define S3C2410_DCON_HWTRIG		(1<<23)
+#define S3C2410_DCON_AUTORELOAD		(0 << 22)
+#define S3C2410_DCON_NORELOAD		(1 << 22)
+#define S3C2410_DCON_HWTRIG		(1 << 23)
 
 #ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT		(1<<2)
 
-#define S3C2440_DCON_CH0_I2SSDO		(5<<24)
-#define S3C2440_DCON_CH0_PCMIN		(6<<24)
+#define S3C2440_DIDSTC_CHKINT		(1 << 2)
 
-#define S3C2440_DCON_CH1_PCMOUT		(5<<24)
-#define S3C2440_DCON_CH1_SDI		(6<<24)
+#define S3C2440_DCON_CH0_I2SSDO		(5 << 24)
+#define S3C2440_DCON_CH0_PCMIN		(6 << 24)
 
-#define S3C2440_DCON_CH2_PCMIN		(5<<24)
-#define S3C2440_DCON_CH2_MICIN		(6<<24)
+#define S3C2440_DCON_CH1_PCMOUT		(5 << 24)
+#define S3C2440_DCON_CH1_SDI		(6 << 24)
 
-#define S3C2440_DCON_CH3_MICIN		(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT		(6<<24)
-#endif
+#define S3C2440_DCON_CH2_PCMIN		(5 << 24)
+#define S3C2440_DCON_CH2_MICIN		(6 << 24)
+
+#define S3C2440_DCON_CH3_MICIN		(5 << 24)
+#define S3C2440_DCON_CH3_PCMOUT		(6 << 24)
+#endif /* CONFIG_CPU_S3C2440 */
 
 #ifdef CONFIG_CPU_S3C2412
 
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+#define S3C2412_DMAREQSEL_SRC(x)	((x) << 1)
 
 #define S3C2412_DMAREQSEL_HW		(1)
 
@@ -115,10 +117,11 @@
 #define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
 #define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
 #define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+#endif /* CONFIG_CPU_S3C2412 */
 
-#endif
+#ifdef CONFIG_CPU_S3C2443
 
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+#define S3C2443_DMAREQSEL_SRC(x)	((x) << 1)
 
 #define S3C2443_DMAREQSEL_HW		(1)
 
@@ -141,5 +144,8 @@
 #define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
 #define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
 #define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_PCMIN		S3C2443_DMAREQSEL_SRC(28)
 #define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+#endif /* CONFIG_CPU_S3C2443 */
+
+#endif /* __ASM_PLAT_REGS_DMA_H */

arch/arm/plat-samsung/include/plat/regs-iis.h

@@ -0,0 +1,70 @@
+/* arch/arm/plat-samsung/include/plat/regs-iis.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_IIS_H
+#define __ASM_ARCH_REGS_IIS_H
+
+#define S3C2410_IISCON			(0x00)
+
+#define S3C2410_IISCON_LRINDEX		(1 << 8)
+#define S3C2410_IISCON_TXFIFORDY	(1 << 7)
+#define S3C2410_IISCON_RXFIFORDY	(1 << 6)
+#define S3C2410_IISCON_TXDMAEN		(1 << 5)
+#define S3C2410_IISCON_RXDMAEN		(1 << 4)
+#define S3C2410_IISCON_TXIDLE		(1 << 3)
+#define S3C2410_IISCON_RXIDLE		(1 << 2)
+#define S3C2410_IISCON_PSCEN		(1 << 1)
+#define S3C2410_IISCON_IISEN		(1 << 0)
+
+#define S3C2410_IISMOD			(0x04)
+
+#define S3C2440_IISMOD_MPLL		(1 << 9)
+#define S3C2410_IISMOD_SLAVE		(1 << 8)
+#define S3C2410_IISMOD_NOXFER		(0 << 6)
+#define S3C2410_IISMOD_RXMODE		(1 << 6)
+#define S3C2410_IISMOD_TXMODE		(2 << 6)
+#define S3C2410_IISMOD_TXRXMODE		(3 << 6)
+#define S3C2410_IISMOD_LR_LLOW		(0 << 5)
+#define S3C2410_IISMOD_LR_RLOW		(1 << 5)
+#define S3C2410_IISMOD_IIS		(0 << 4)
+#define S3C2410_IISMOD_MSB		(1 << 4)
+#define S3C2410_IISMOD_8BIT		(0 << 3)
+#define S3C2410_IISMOD_16BIT		(1 << 3)
+#define S3C2410_IISMOD_BITMASK		(1 << 3)
+#define S3C2410_IISMOD_256FS		(0 << 2)
+#define S3C2410_IISMOD_384FS		(1 << 2)
+#define S3C2410_IISMOD_16FS		(0 << 0)
+#define S3C2410_IISMOD_32FS		(1 << 0)
+#define S3C2410_IISMOD_48FS		(2 << 0)
+#define S3C2410_IISMOD_FS_MASK		(3 << 0)
+
+#define S3C2410_IISPSR			(0x08)
+
+#define S3C2410_IISPSR_INTMASK		(31 << 5)
+#define S3C2410_IISPSR_INTSHIFT		(5)
+#define S3C2410_IISPSR_EXTMASK		(31 << 0)
+#define S3C2410_IISPSR_EXTSHFIT		(0)
+
+#define S3C2410_IISFCON			(0x0c)
+
+#define S3C2410_IISFCON_TXDMA		(1 << 15)
+#define S3C2410_IISFCON_RXDMA		(1 << 14)
+#define S3C2410_IISFCON_TXENABLE	(1 << 13)
+#define S3C2410_IISFCON_RXENABLE	(1 << 12)
+#define S3C2410_IISFCON_TXMASK		(0x3f << 6)
+#define S3C2410_IISFCON_TXSHIFT		(6)
+#define S3C2410_IISFCON_RXMASK		(0x3f)
+#define S3C2410_IISFCON_RXSHIFT		(0)
+
+#define S3C2410_IISFIFO			(0x10)
+
+#endif /* __ASM_ARCH_REGS_IIS_H */

arch/arm/plat-samsung/include/plat/regs-spi.h

@@ -0,0 +1,48 @@
+/* arch/arm/plat-samsung/include/plat/regs-spi.h
+ *
+ * Copyright (c) 2004 Fetron GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 SPI register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_SPI_H
+#define __ASM_ARCH_REGS_SPI_H
+
+#define S3C2410_SPI1		(0x20)
+#define S3C2412_SPI1		(0x100)
+
+#define S3C2410_SPCON		(0x00)
+
+#define S3C2410_SPCON_SMOD_DMA	(2 << 5)	/* DMA mode */
+#define S3C2410_SPCON_SMOD_INT	(1 << 5)	/* interrupt mode */
+#define S3C2410_SPCON_SMOD_POLL	(0 << 5)	/* polling mode */
+#define S3C2410_SPCON_ENSCK	(1 << 4)	/* Enable SCK */
+#define S3C2410_SPCON_MSTR	(1 << 3)	/* Master:1, Slave:0 select */
+#define S3C2410_SPCON_CPOL_HIGH	(1 << 2)	/* Clock polarity select */
+#define S3C2410_SPCON_CPOL_LOW	(0 << 2)	/* Clock polarity select */
+
+#define S3C2410_SPCON_CPHA_FMTB	(1 << 1)	/* Clock Phase Select */
+#define S3C2410_SPCON_CPHA_FMTA	(0 << 1)	/* Clock Phase Select */
+
+#define S3C2410_SPSTA		(0x04)
+
+#define S3C2410_SPSTA_DCOL	(1 << 2)	/* Data Collision Error */
+#define S3C2410_SPSTA_MULD	(1 << 1)	/* Multi Master Error */
+#define S3C2410_SPSTA_READY	(1 << 0)	/* Data Tx/Rx ready */
+#define S3C2412_SPSTA_READY_ORG	(1 << 3)
+
+#define S3C2410_SPPIN		(0x08)
+
+#define S3C2410_SPPIN_ENMUL	(1 << 2)	/* Multi Master Error detect */
+#define S3C2410_SPPIN_RESERVED	(1 << 1)
+#define S3C2410_SPPIN_KEEP	(1 << 0)	/* Master Out keep */
+
+#define S3C2410_SPPRE		(0x0C)
+#define S3C2410_SPTDAT		(0x10)
+#define S3C2410_SPRDAT		(0x14)
+
+#endif /* __ASM_ARCH_REGS_SPI_H */

arch/arm/plat-s5p/include/plat/regs-srom.h → arch/arm/plat-samsung/include/plat/regs-srom.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h
+/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -10,8 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_S5P_REGS_SROM_H
-#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__
+#ifndef __PLAT_SAMSUNG_REGS_SROM_H
+#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
 
 #include <mach/map.h>
 
@@ -51,4 +51,4 @@
 #define S5P_SROM_BCX__TCOS__SHIFT		24
 #define S5P_SROM_BCX__TACS__SHIFT		28
 
-#endif /* __ASM_PLAT_S5P_REGS_SROM_H */
+#endif /* __PLAT_SAMSUNG_REGS_SROM_H */

arch/arm/plat-s3c24xx/include/plat/regs-udc.h → arch/arm/plat-samsung/include/plat/regs-udc.h

@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
+/* arch/arm/plat-samsung/include/plat/regs-udc.h
  *
  * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
  *
@@ -75,79 +75,77 @@
 #define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
 #define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
 
-#define S3C2410_UDC_FUNCADDR_UPDATE	(1<<7)
+#define S3C2410_UDC_FUNCADDR_UPDATE	(1 << 7)
 
-#define S3C2410_UDC_PWR_ISOUP		(1<<7) // R/W
-#define S3C2410_UDC_PWR_RESET		(1<<3) // R
-#define S3C2410_UDC_PWR_RESUME		(1<<2) // R/W
-#define S3C2410_UDC_PWR_SUSPEND		(1<<1) // R
-#define S3C2410_UDC_PWR_ENSUSPEND	(1<<0) // R/W
+#define S3C2410_UDC_PWR_ISOUP		(1 << 7) /* R/W */
+#define S3C2410_UDC_PWR_RESET		(1 << 3) /* R   */
+#define S3C2410_UDC_PWR_RESUME		(1 << 2) /* R/W */
+#define S3C2410_UDC_PWR_SUSPEND		(1 << 1) /* R   */
+#define S3C2410_UDC_PWR_ENSUSPEND	(1 << 0) /* R/W */
 
-#define S3C2410_UDC_PWR_DEFAULT		0x00
+#define S3C2410_UDC_PWR_DEFAULT		(0x00)
 
-#define S3C2410_UDC_INT_EP4		(1<<4) // R/W (clear only)
-#define S3C2410_UDC_INT_EP3		(1<<3) // R/W (clear only)
-#define S3C2410_UDC_INT_EP2		(1<<2) // R/W (clear only)
-#define S3C2410_UDC_INT_EP1		(1<<1) // R/W (clear only)
-#define S3C2410_UDC_INT_EP0		(1<<0) // R/W (clear only)
+#define S3C2410_UDC_INT_EP4		(1 << 4) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP3		(1 << 3) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP2		(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP1		(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP0		(1 << 0) /* R/W (clear only) */
 
-#define S3C2410_UDC_USBINT_RESET	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_USBINT_RESUME	(1<<1) // R/W (clear only)
-#define S3C2410_UDC_USBINT_SUSPEND	(1<<0) // R/W (clear only)
+#define S3C2410_UDC_USBINT_RESET	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_RESUME	(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_SUSPEND	(1 << 0) /* R/W (clear only) */
 
-#define S3C2410_UDC_INTE_EP4		(1<<4) // R/W
-#define S3C2410_UDC_INTE_EP3		(1<<3) // R/W
-#define S3C2410_UDC_INTE_EP2		(1<<2) // R/W
-#define S3C2410_UDC_INTE_EP1		(1<<1) // R/W
-#define S3C2410_UDC_INTE_EP0		(1<<0) // R/W
-
-#define S3C2410_UDC_USBINTE_RESET	(1<<2) // R/W
-#define S3C2410_UDC_USBINTE_SUSPEND	(1<<0) // R/W
+#define S3C2410_UDC_INTE_EP4		(1 << 4) /* R/W */
+#define S3C2410_UDC_INTE_EP3		(1 << 3) /* R/W */
+#define S3C2410_UDC_INTE_EP2		(1 << 2) /* R/W */
+#define S3C2410_UDC_INTE_EP1		(1 << 1) /* R/W */
+#define S3C2410_UDC_INTE_EP0		(1 << 0) /* R/W */
 
+#define S3C2410_UDC_USBINTE_RESET	(1 << 2) /* R/W */
+#define S3C2410_UDC_USBINTE_SUSPEND	(1 << 0) /* R/W */
 
 #define S3C2410_UDC_INDEX_EP0		(0x00)
-#define S3C2410_UDC_INDEX_EP1		(0x01) // ??
-#define S3C2410_UDC_INDEX_EP2		(0x02) // ??
-#define S3C2410_UDC_INDEX_EP3		(0x03) // ??
-#define S3C2410_UDC_INDEX_EP4		(0x04) // ??
-
-#define S3C2410_UDC_ICSR1_CLRDT		(1<<6) // R/W
-#define S3C2410_UDC_ICSR1_SENTSTL	(1<<5) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_SENDSTL	(1<<4) // R/W
-#define S3C2410_UDC_ICSR1_FFLUSH	(1<<3) // W   (set only)
-#define S3C2410_UDC_ICSR1_UNDRUN	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_PKTRDY	(1<<0) // R/W (set only)
-
-#define S3C2410_UDC_ICSR2_AUTOSET	(1<<7) // R/W
-#define S3C2410_UDC_ICSR2_ISO		(1<<6) // R/W
-#define S3C2410_UDC_ICSR2_MODEIN	(1<<5) // R/W
-#define S3C2410_UDC_ICSR2_DMAIEN	(1<<4) // R/W
-
-#define S3C2410_UDC_OCSR1_CLRDT		(1<<7) // R/W
-#define S3C2410_UDC_OCSR1_SENTSTL	(1<<6) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_SENDSTL	(1<<5) // R/W
-#define S3C2410_UDC_OCSR1_FFLUSH	(1<<4) // R/W
-#define S3C2410_UDC_OCSR1_DERROR	(1<<3) // R
-#define S3C2410_UDC_OCSR1_OVRRUN	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_PKTRDY	(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_OCSR2_AUTOCLR	(1<<7) // R/W
-#define S3C2410_UDC_OCSR2_ISO		(1<<6) // R/W
-#define S3C2410_UDC_OCSR2_DMAIEN	(1<<5) // R/W
-
-#define S3C2410_UDC_EP0_CSR_OPKRDY	(1<<0)
-#define S3C2410_UDC_EP0_CSR_IPKRDY	(1<<1)
-#define S3C2410_UDC_EP0_CSR_SENTSTL	(1<<2)
-#define S3C2410_UDC_EP0_CSR_DE		(1<<3)
-#define S3C2410_UDC_EP0_CSR_SE		(1<<4)
-#define S3C2410_UDC_EP0_CSR_SENDSTL	(1<<5)
-#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1<<6)
-#define S3C2410_UDC_EP0_CSR_SSE	(1<<7)
-
-#define S3C2410_UDC_MAXP_8		(1<<0)
-#define S3C2410_UDC_MAXP_16		(1<<1)
-#define S3C2410_UDC_MAXP_32		(1<<2)
-#define S3C2410_UDC_MAXP_64		(1<<3)
-
+#define S3C2410_UDC_INDEX_EP1		(0x01)
+#define S3C2410_UDC_INDEX_EP2		(0x02)
+#define S3C2410_UDC_INDEX_EP3		(0x03)
+#define S3C2410_UDC_INDEX_EP4		(0x04)
+
+#define S3C2410_UDC_ICSR1_CLRDT		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR1_SENTSTL	(1 << 5) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_SENDSTL	(1 << 4) /* R/W */
+#define S3C2410_UDC_ICSR1_FFLUSH	(1 << 3) /* W   (set only) */
+#define S3C2410_UDC_ICSR1_UNDRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_PKTRDY	(1 << 0) /* R/W (set only) */
+
+#define S3C2410_UDC_ICSR2_AUTOSET	(1 << 7) /* R/W */
+#define S3C2410_UDC_ICSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR2_MODEIN	(1 << 5) /* R/W */
+#define S3C2410_UDC_ICSR2_DMAIEN	(1 << 4) /* R/W */
+
+#define S3C2410_UDC_OCSR1_CLRDT		(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR1_SENTSTL	(1 << 6) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_SENDSTL	(1 << 5) /* R/W */
+#define S3C2410_UDC_OCSR1_FFLUSH	(1 << 4) /* R/W */
+#define S3C2410_UDC_OCSR1_DERROR	(1 << 3) /* R   */
+#define S3C2410_UDC_OCSR1_OVRRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_PKTRDY	(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_OCSR2_AUTOCLR	(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_OCSR2_DMAIEN	(1 << 5) /* R/W */
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY	(1 << 0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY	(1 << 1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL	(1 << 2)
+#define S3C2410_UDC_EP0_CSR_DE		(1 << 3)
+#define S3C2410_UDC_EP0_CSR_SE		(1 << 4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL	(1 << 5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1 << 6)
+#define S3C2410_UDC_EP0_CSR_SSE		(1 << 7)
+
+#define S3C2410_UDC_MAXP_8		(1 << 0)
+#define S3C2410_UDC_MAXP_16		(1 << 1)
+#define S3C2410_UDC_MAXP_32		(1 << 2)
+#define S3C2410_UDC_MAXP_64		(1 << 3)
 
 #endif

arch/arm/plat-s5p/include/plat/reset.h → arch/arm/plat-samsung/include/plat/reset.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/reset.h
+/* linux/arch/arm/plat-samsung/include/plat/reset.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
@@ -8,9 +8,9 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_S5P_RESET_H
-#define __ASM_PLAT_S5P_RESET_H __FILE__
+#ifndef __PLAT_SAMSUNG_RESET_H
+#define __PLAT_SAMSUNG_RESET_H __FILE__
 
 extern void (*s5p_reset_hook)(void);
 
-#endif /* __ASM_PLAT_S5P_RESET_H */
+#endif /* __PLAT_SAMSUNG_RESET_H */

arch/arm/plat-s3c24xx/include/plat/s3c2410.h → arch/arm/plat-samsung/include/plat/s3c2410.h

@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>

arch/arm/plat-s3c24xx/include/plat/s3c2412.h → arch/arm/plat-samsung/include/plat/s3c2412.h

@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>

arch/arm/plat-s3c24xx/include/plat/s3c2416.h → arch/arm/plat-samsung/include/plat/s3c2416.h

@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
  *
  * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
  *

arch/arm/plat-s3c24xx/include/plat/s3c2443.h → arch/arm/plat-samsung/include/plat/s3c2443.h

@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>

arch/arm/plat-s3c24xx/include/plat/s3c244x.h → arch/arm/plat-samsung/include/plat/s3c244x.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>

arch/arm/mach-s3c64xx/include/mach/s3c6400.h → arch/arm/plat-samsung/include/plat/s3c6400.h

@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics

arch/arm/mach-s3c64xx/include/mach/s3c6410.h → arch/arm/plat-samsung/include/plat/s3c6410.h

@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h
  *
  * Copyright 2008 Openmoko,  Inc.
  * Copyright 2008 Simtec Electronics

arch/arm/plat-s5p/include/plat/s5p-clock.h → arch/arm/plat-samsung/include/plat/s5p-clock.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
+/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h
  *
  * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com

arch/arm/plat-s5p/include/plat/s5p-time.h → arch/arm/plat-samsung/include/plat/s5p-time.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h
+/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
  *
  * Copyright 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/

arch/arm/plat-s5p/include/plat/s5p6440.h → arch/arm/plat-samsung/include/plat/s5p6440.h

@@ -1,4 +1,4 @@
-/* arch/arm/plat-s5p/include/plat/s5p6440.h
+/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h
  *
  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/

arch/arm/plat-s5p/include/plat/s5p6450.h → arch/arm/plat-samsung/include/plat/s5p6450.h

@@ -1,4 +1,4 @@
-/* arch/arm/plat-s5p/include/plat/s5p6450.h
+/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com

arch/arm/plat-s5p/include/plat/s5pc100.h → arch/arm/plat-samsung/include/plat/s5pc100.h

@@ -1,4 +1,4 @@
-/* arch/arm/plat-s5p/include/plat/s5pc100.h
+/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/

arch/arm/plat-s5p/include/plat/s5pv210.h → arch/arm/plat-samsung/include/plat/s5pv210.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
+/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -55,10 +55,6 @@ enum clk_types {
  *		 cd_type == S3C_SDHCI_CD_GPIO
  * @ext_cd_gpio_invert: invert values for external CD gpio line
  * @cfg_gpio: Configure the GPIO for a specific card bit-width
- * @cfg_card: Configure the interface for a specific card and speed. This
- *            is necessary the controllers and/or GPIO blocks require the
- *	      changing of driver-strength and other controls dependent on
- *	      the card and speed of operation.
  *
  * Initialisation data specific to either the machine or the platform
  * for the device driver to use or call-back when configuring gpio or
@@ -80,10 +76,6 @@ struct s3c_sdhci_platdata {
 						      int state));
 
 	void	(*cfg_gpio)(struct platform_device *dev, int width);
-	void	(*cfg_card)(struct platform_device *dev,
-			    void __iomem *regbase,
-			    struct mmc_ios *ios,
-			    struct mmc_card *card);
 };
 
 /* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
@@ -139,17 +131,11 @@ extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 #ifdef CONFIG_S3C2416_SETUP_SDHCI
 extern char *s3c2416_hsmmc_clksrcs[4];
 
-extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void s3c2416_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
 #endif /* CONFIG_S3C_DEV_HSMMC */
 }
 
@@ -158,7 +144,6 @@ static inline void s3c2416_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 }
 
@@ -172,17 +157,11 @@ static inline void s3c2416_default_sdhci1(void) { }
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI
 extern char *s3c64xx_hsmmc_clksrcs[4];
 
-extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
-					 void __iomem *r,
-					 struct mmc_ios *ios,
-					 struct mmc_card *card);
-
 static inline void s3c6400_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -191,7 +170,6 @@ static inline void s3c6400_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -200,21 +178,14 @@ static inline void s3c6400_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 #endif
 }
 
-extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
-					 void __iomem *r,
-					 struct mmc_ios *ios,
-					 struct mmc_card *card);
-
 static inline void s3c6410_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -223,7 +194,6 @@ static inline void s3c6410_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -232,7 +202,6 @@ static inline void s3c6410_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -251,17 +220,11 @@ static inline void s3c6400_default_sdhci2(void) { }
 #ifdef CONFIG_S5PC100_SETUP_SDHCI
 extern char *s5pc100_hsmmc_clksrcs[4];
 
-extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void s5pc100_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
 #endif
 }
 
@@ -270,7 +233,6 @@ static inline void s5pc100_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
 #endif
 }
 
@@ -279,7 +241,6 @@ static inline void s5pc100_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
 #endif
 }
 
@@ -295,17 +256,11 @@ static inline void s5pc100_default_sdhci2(void) { }
 #ifdef CONFIG_S5PV210_SETUP_SDHCI
 extern char *s5pv210_hsmmc_clksrcs[4];
 
-extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void s5pv210_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -314,7 +269,6 @@ static inline void s5pv210_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -323,7 +277,6 @@ static inline void s5pv210_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -332,7 +285,6 @@ static inline void s5pv210_default_sdhci3(void)
 #ifdef CONFIG_S3C_DEV_HSMMC3
 	s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
-	s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -348,17 +300,11 @@ static inline void s5pv210_default_sdhci3(void) { }
 #ifdef CONFIG_EXYNOS4_SETUP_SDHCI
 extern char *exynos4_hsmmc_clksrcs[4];
 
-extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void exynos4_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -367,7 +313,6 @@ static inline void exynos4_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -376,7 +321,6 @@ static inline void exynos4_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -385,7 +329,6 @@ static inline void exynos4_default_sdhci3(void)
 #ifdef CONFIG_S3C_DEV_HSMMC3
 	s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
-	s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 

arch/arm/plat-s5p/include/plat/sysmmu.h → arch/arm/plat-samsung/include/plat/sysmmu.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
+/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -10,8 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM__PLAT_SYSMMU_H
-#define __ASM__PLAT_SYSMMU_H __FILE__
+#ifndef __PLAT_SAMSUNG_SYSMMU_H
+#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
 
 enum S5P_SYSMMU_INTERRUPT_TYPE {
 	SYSMMU_PAGEFAULT,

arch/arm/plat-s5p/include/plat/system-reset.h → arch/arm/plat-samsung/include/plat/system-reset.h

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/system-reset.h
+/* linux/arch/arm/plat-samsung/include/plat/system-reset.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com

arch/arm/plat-s3c24xx/include/plat/udc.h → arch/arm/plat-samsung/include/plat/udc.h

@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/udc.h
+/* arch/arm/plat-samsung/include/plat/udc.h
  *
  * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
  *
@@ -26,7 +26,7 @@ enum s3c2410_udc_cmd_e {
 
 struct s3c2410_udc_mach_info {
 	void	(*udc_command)(enum s3c2410_udc_cmd_e);
- 	void	(*vbus_draw)(unsigned int ma);
+	void	(*vbus_draw)(unsigned int ma);
 
 	unsigned int pullup_pin;
 	unsigned int pullup_pin_inverted;

arch/arm/plat-s5p/include/plat/usb-phy.h → arch/arm/plat-samsung/include/plat/usb-phy.h

@@ -8,8 +8,8 @@
  * option) any later version.
  */
 
-#ifndef __PLAT_S5P_USB_PHY_H
-#define __PLAT_S5P_USB_PHY_H
+#ifndef __PLAT_SAMSUNG_USB_PHY_H
+#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
 
 enum s5p_usb_phy_type {
 	S5P_USB_PHY_DEVICE,
@@ -19,4 +19,4 @@ enum s5p_usb_phy_type {
 extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
 extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
 
-#endif /* __PLAT_S5P_REGS_USB_PHY_H */
+#endif /* __PLAT_SAMSUNG_USB_PHY_H */

arch/arm/plat-samsung/platformdata.c

@@ -50,8 +50,6 @@ void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
 		set->max_width = pd->max_width;
 	if (pd->cfg_gpio)
 		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
 	if (pd->host_caps)
 		set->host_caps |= pd->host_caps;
 	if (pd->clk_type)

arch/arm/plat-samsung/pwm-clock.c

@@ -27,7 +27,7 @@
 #include <plat/cpu.h>
 
 #include <plat/regs-timer.h>
-#include <mach/pwm-clock.h>
+#include <plat/pwm-clock.h>
 
 /* Each of the timers 0 through 5 go through the following
  * clock tree, with the inputs depending on the timers.
@@ -339,8 +339,17 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long bits;
 	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
 
+	unsigned long mux_tclk;
+
+	if (soc_is_s3c24xx())
+		mux_tclk = S3C2410_TCFG1_MUX_TCLK;
+	else if (soc_is_s5p6440() || soc_is_s5p6450())
+		mux_tclk = 0;
+	else
+		mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
+
 	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = S3C_TCFG1_MUX_TCLK << shift;
+		bits = mux_tclk << shift;
 	else if (parent == s3c24xx_pwmclk_tdiv(id))
 		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
 	else