[PATCH] powerpc: merge the rest of arch/ppc*/oprofile

- merge common.c
- move model specific files
- remove stub Makefiles
- clean up arch/ppc*/Makefile

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/ppc64/oprofile/common.c → arch/powerpc/oprofile/common.c

@@ -1,5 +1,9 @@
 /*
+ * PPC 64 oprofile support:
  * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * PPC 32 oprofile support: (based on PPC 64 support)
+ * Copyright (C) Freescale Semiconductor, Inc 2004
+ *	Author: Andy Fleming
  *
  * Based on alpha version.
  *
@@ -10,12 +14,19 @@
  */
 
 #include <linux/oprofile.h>
+#ifndef __powerpc64__
+#include <linux/slab.h>
+#endif /* ! __powerpc64__ */
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/errno.h>
 #include <asm/ptrace.h>
 #include <asm/system.h>
+#ifdef __powerpc64__
 #include <asm/pmc.h>
+#else /* __powerpc64__ */
+#include <asm/perfmon.h>
+#endif /* __powerpc64__ */
 #include <asm/cputable.h>
 #include <asm/oprofile_impl.h>
 
@@ -24,59 +35,84 @@ static struct op_powerpc_model *model;
 static struct op_counter_config ctr[OP_MAX_COUNTER];
 static struct op_system_config sys;
 
+#ifndef __powerpc64__
+static char *cpu_type;
+#endif /* ! __powerpc64__ */
+
 static void op_handle_interrupt(struct pt_regs *regs)
 {
 	model->handle_interrupt(regs, ctr);
 }
 
-static int op_ppc64_setup(void)
+static int op_powerpc_setup(void)
 {
+#ifdef __powerpc64__
 	int err;
 
 	/* Grab the hardware */
 	err = reserve_pmc_hardware(op_handle_interrupt);
 	if (err)
 		return err;
+#else /* __powerpc64__ */
+	/* Install our interrupt handler into the existing hook.  */
+	if (request_perfmon_irq(&op_handle_interrupt))
+		return -EBUSY;
+	mb();
+#endif /* __powerpc64__ */
 
 	/* Pre-compute the values to stuff in the hardware registers.  */
 	model->reg_setup(ctr, &sys, model->num_counters);
 
 	/* Configure the registers on all cpus.  */
+#ifdef __powerpc64__
 	on_each_cpu(model->cpu_setup, NULL, 0, 1);
+#else /* __powerpc64__ */
+#if 0
+	/* FIXME: Make multi-cpu work */
+	on_each_cpu(model->reg_setup, NULL, 0, 1);
+#endif
+#endif /* __powerpc64__ */
 
 	return 0;
 }
 
-static void op_ppc64_shutdown(void)
+static void op_powerpc_shutdown(void)
 {
+#ifdef __powerpc64__
 	release_pmc_hardware();
+#else /* __powerpc64__ */
+	mb();
+	/* Remove our interrupt handler. We may be removing this module. */
+	free_perfmon_irq();
+#endif /* __powerpc64__ */
 }
 
-static void op_ppc64_cpu_start(void *dummy)
+static void op_powerpc_cpu_start(void *dummy)
 {
 	model->start(ctr);
 }
 
-static int op_ppc64_start(void)
+static int op_powerpc_start(void)
 {
-	on_each_cpu(op_ppc64_cpu_start, NULL, 0, 1);
+	on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1);
 	return 0;
 }
 
-static inline void op_ppc64_cpu_stop(void *dummy)
+static inline void op_powerpc_cpu_stop(void *dummy)
 {
 	model->stop();
 }
 
-static void op_ppc64_stop(void)
+static void op_powerpc_stop(void)
 {
-	on_each_cpu(op_ppc64_cpu_stop, NULL, 0, 1);
+	on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1);
 }
 
-static int op_ppc64_create_files(struct super_block *sb, struct dentry *root)
+static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
 {
 	int i;
 
+#ifdef __powerpc64__
 	/*
 	 * There is one mmcr0, mmcr1 and mmcra for setting the events for
 	 * all of the counters.
@@ -84,6 +120,7 @@ static int op_ppc64_create_files(struct super_block *sb, struct dentry *root)
 	oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
 	oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
 	oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
+#endif /* __powerpc64__ */
 
 	for (i = 0; i < model->num_counters; ++i) {
 		struct dentry *dir;
@@ -95,44 +132,72 @@ static int op_ppc64_create_files(struct super_block *sb, struct dentry *root)
 		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
 		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
 		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+#ifdef __powerpc64__
 		/*
 		 * We dont support per counter user/kernel selection, but
 		 * we leave the entries because userspace expects them
 		 */
+#endif /* __powerpc64__ */
 		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
 		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+
+#ifndef __powerpc64__
+		/* FIXME: Not sure if this is used */
+#endif /* ! __powerpc64__ */
 		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
 	}
 
 	oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
 	oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
+#ifdef __powerpc64__
 	oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
 				&sys.backtrace_spinlocks);
+#endif /* __powerpc64__ */
 
 	/* Default to tracing both kernel and user */
 	sys.enable_kernel = 1;
 	sys.enable_user = 1;
-
+#ifdef __powerpc64__
 	/* Turn on backtracing through spinlocks by default */
 	sys.backtrace_spinlocks = 1;
+#endif /* __powerpc64__ */
 
 	return 0;
 }
 
 int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
+#ifndef __powerpc64__
+	int cpu_id = smp_processor_id();
+
+#ifdef CONFIG_FSL_BOOKE
+	model = &op_model_fsl_booke;
+#else
+	return -ENODEV;
+#endif
+
+	cpu_type = kmalloc(32, GFP_KERNEL);
+	if (NULL == cpu_type)
+		return -ENOMEM;
+
+	sprintf(cpu_type, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
+
+	model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
+
+	ops->cpu_type = cpu_type;
+#else /* __powerpc64__ */
 	if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
 		return -ENODEV;
-
 	model = cur_cpu_spec->oprofile_model;
 	model->num_counters = cur_cpu_spec->num_pmcs;
 
 	ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
-	ops->create_files = op_ppc64_create_files;
-	ops->setup = op_ppc64_setup;
-	ops->shutdown = op_ppc64_shutdown;
-	ops->start = op_ppc64_start;
-	ops->stop = op_ppc64_stop;
+#endif /* __powerpc64__ */
+	ops->create_files = op_powerpc_create_files;
+	ops->setup = op_powerpc_setup;
+	ops->shutdown = op_powerpc_shutdown;
+	ops->start = op_powerpc_start;
+	ops->stop = op_powerpc_stop;
 
 	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
 	       ops->cpu_type);
@@ -142,4 +207,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 
 void oprofile_arch_exit(void)
 {
+#ifndef __powerpc64__
+	kfree(cpu_type);
+	cpu_type = NULL;
+#endif /* ! __powerpc64__ */
 }

arch/ppc/Makefile

@@ -71,7 +71,7 @@ drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
 drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
 drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
 
-drivers-$(CONFIG_OPROFILE)	+= arch/ppc/oprofile/
+drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
 

arch/ppc/oprofile/Makefile

@@ -1 +0,0 @@
-include arch/powerpc/oprofile/Makefile

arch/ppc/oprofile/common.c

@@ -1,160 +0,0 @@
-/*
- * PPC 32 oprofile support
- * Based on PPC64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (C) Freescale Semiconductor, Inc 2004
- *
- * Author: Andy Fleming
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/perfmon.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
-	model->handle_interrupt(regs, ctr);
-}
-
-static int op_ppc32_setup(void)
-{
-	/* Install our interrupt handler into the existing hook.  */
-	if(request_perfmon_irq(&op_handle_interrupt))
-		return -EBUSY;
-
-	mb();
-
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	model->reg_setup(ctr, &sys, model->num_counters);
-
-#if 0
-	/* FIXME: Make multi-cpu work */
-	/* Configure the registers on all cpus.  */
-	on_each_cpu(model->reg_setup, NULL, 0, 1);
-#endif
-
-	return 0;
-}
-
-static void op_ppc32_shutdown(void)
-{
-	mb();
-
-	/* Remove our interrupt handler. We may be removing this module. */
-	free_perfmon_irq();
-}
-
-static void op_ppc32_cpu_start(void *dummy)
-{
-	model->start(ctr);
-}
-
-static int op_ppc32_start(void)
-{
-	on_each_cpu(op_ppc32_cpu_start, NULL, 0, 1);
-	return 0;
-}
-
-static inline void op_ppc32_cpu_stop(void *dummy)
-{
-	model->stop();
-}
-
-static void op_ppc32_stop(void)
-{
-	on_each_cpu(op_ppc32_cpu_stop, NULL, 0, 1);
-}
-
-static int op_ppc32_create_files(struct super_block *sb, struct dentry *root)
-{
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[3];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
-
-		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-
-		/* FIXME: Not sure if this is used */
-		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
-	oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-
-	/* Default to tracing both kernel and user */
-	sys.enable_kernel = 1;
-	sys.enable_user = 1;
-
-	return 0;
-}
-
-static struct oprofile_operations oprof_ppc32_ops = {
-	.create_files	= op_ppc32_create_files,
-	.setup		= op_ppc32_setup,
-	.shutdown	= op_ppc32_shutdown,
-	.start		= op_ppc32_start,
-	.stop		= op_ppc32_stop,
-	.cpu_type	= NULL		/* To be filled in below. */
-};
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	char *name;
-	int cpu_id = smp_processor_id();
-
-#ifdef CONFIG_FSL_BOOKE
-	model = &op_model_fsl_booke;
-#else
-	return -ENODEV;
-#endif
-
-	name = kmalloc(32, GFP_KERNEL);
-
-	if (NULL == name)
-		return -ENOMEM;
-
-	sprintf(name, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
-
-	oprof_ppc32_ops.cpu_type = name;
-
-	model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
-
-	*ops = oprof_ppc32_ops;
-
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
-	       oprof_ppc32_ops.cpu_type);
-
-	return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-	kfree(oprof_ppc32_ops.cpu_type);
-	oprof_ppc32_ops.cpu_type = NULL;
-}

arch/ppc64/Makefile

@@ -85,7 +85,7 @@ libs-y				+= arch/ppc64/lib/
 core-y				+= arch/ppc64/kernel/
 core-y				+= arch/ppc64/mm/
 core-$(CONFIG_XMON)		+= arch/ppc64/xmon/
-drivers-$(CONFIG_OPROFILE)	+= arch/ppc64/oprofile/
+drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 
 boot := arch/ppc64/boot
 

arch/ppc64/oprofile/Makefile

@@ -1 +0,0 @@
-include arch/powerpc/oprofile/Makefile