V4L/DVB (13997): gspca_ov519: differentiate ov7620 and ov7620ae and fix 640x480 on the 7620

Michael Deegan <michael@ucc.gu.uwa.edu.au>, has reported issues with
using 640x480 mode on his ov518+ webcam. The fix for this breaks things
on my ov518+ cam (Trust 320 Sp@cecam), this patch thus adds differentiation
in the driver between the OV7620 sensor his cam has and the OV7620AE sensor
my cam has, and then only changes the init sequence for the ov518+ +
OV7620 combo which was not working for Michael.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/gspca/ov519.c

@@ -99,10 +99,11 @@ struct sd {
 #define SEN_OV66308AF 5
 #define SEN_OV7610 6
 #define SEN_OV7620 7
-#define SEN_OV7640 8
-#define SEN_OV7670 9
-#define SEN_OV76BE 10
-#define SEN_OV8610 11
+#define SEN_OV7620AE 8
+#define SEN_OV7640 9
+#define SEN_OV7670 10
+#define SEN_OV76BE 11
+#define SEN_OV8610 12
 
 	u8 sensor_addr;
 	int sensor_width;
@@ -2554,7 +2555,7 @@ static int ov7xx0_configure(struct sd *sd)
 		/* I don't know what's different about the 76BE yet. */
 		if (i2c_r(sd, 0x15) & 1) {
 			PDEBUG(D_PROBE, "Sensor is an OV7620AE");
-			sd->sensor = SEN_OV7620;
+			sd->sensor = SEN_OV7620AE;
 		} else {
 			PDEBUG(D_PROBE, "Sensor is an OV76BE");
 			sd->sensor = SEN_OV76BE;
@@ -3169,6 +3170,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			return -EIO;
 		break;
 	case SEN_OV7620:
+	case SEN_OV7620AE:
 		if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
 			return -EIO;
 		break;
@@ -3246,6 +3248,7 @@ static int ov511_mode_init_regs(struct sd *sd)
 	/* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed
 	   for more sensors we need to do this for them too */
 	case SEN_OV7620:
+	case SEN_OV7620AE:
 	case SEN_OV7640:
 	case SEN_OV76BE:
 		if (sd->gspca_dev.width == 320)
@@ -3377,7 +3380,7 @@ static int ov518_mode_init_regs(struct sd *sd)
 
 	if (sd->bridge == BRIDGE_OV518PLUS) {
 		switch (sd->sensor) {
-		case SEN_OV7620:
+		case SEN_OV7620AE:
 			if (sd->gspca_dev.width == 320) {
 				reg_w(sd, 0x20, 0x00);
 				reg_w(sd, 0x21, 0x19);
@@ -3386,6 +3389,10 @@ static int ov518_mode_init_regs(struct sd *sd)
 				reg_w(sd, 0x21, 0x1f);
 			}
 			break;
+		case SEN_OV7620:
+			reg_w(sd, 0x20, 0x00);
+			reg_w(sd, 0x21, 0x19);
+			break;
 		default:
 			reg_w(sd, 0x21, 0x19);
 		}
@@ -3649,6 +3656,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
 		break;
 	case SEN_OV7620:
+	case SEN_OV7620AE:
 	case SEN_OV76BE:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
@@ -3795,6 +3803,7 @@ static int set_ov_sensor_window(struct sd *sd)
 		}
 		break;
 	case SEN_OV7620:
+	case SEN_OV7620AE:
 		hwsbase = 0x2f;		/* From 7620.SET (spec is wrong) */
 		hwebase = 0x2f;
 		vwsbase = vwebase = 0x05;
@@ -4106,6 +4115,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 		i2c_w(sd, OV7610_REG_BRT, val);
 		break;
 	case SEN_OV7620:
+	case SEN_OV7620AE:
 		/* 7620 doesn't like manual changes when in auto mode */
 		if (!sd->autobrightness)
 			i2c_w(sd, OV7610_REG_BRT, val);
@@ -4142,7 +4152,8 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w(sd, 0x64, ctab[val >> 5]);
 		break;
 	    }
-	case SEN_OV7620: {
+	case SEN_OV7620:
+	case SEN_OV7620AE: {
 		static const __u8 ctab[] = {
 			0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
 			0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
@@ -4179,6 +4190,7 @@ static void setcolors(struct gspca_dev *gspca_dev)
 		i2c_w(sd, OV7610_REG_SAT, val);
 		break;
 	case SEN_OV7620:
+	case SEN_OV7620AE:
 		/* Use UV gamma control instead. Bits 0 & 7 are reserved. */
 /*		rc = ov_i2c_write(sd->dev, 0x62, (val >> 9) & 0x7e);
 		if (rc < 0)