Merge commit '517ffce4e1a03aea979fe3a18a3dd1761a24fafb' into arch-sparc

Backmerge from the point in mainline where a trivial conflict had been
introduced (arch/sparc/kernel/sys_sparc_64.c had grown sys_kern_features()
right after where kernel_execve() used to be)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

.gitignore

@@ -14,10 +14,6 @@
 *.o.*
 *.a
 *.s
-*.ko.unsigned
-*.ko.stripped
-*.ko.stripped.dig
-*.ko.stripped.sig
 *.ko
 *.so
 *.so.dbg
@@ -95,6 +91,4 @@ GTAGS
 extra_certificates
 signing_key.priv
 signing_key.x509
-signing_key.x509.keyid
-signing_key.x509.signer
 x509.genkey

Documentation/00-INDEX

@@ -210,6 +210,8 @@ local_ops.txt
 	- semantics and behavior of local atomic operations.
 lockdep-design.txt
 	- documentation on the runtime locking correctness validator.
+lockup-watchdogs.txt
+	- info on soft and hard lockup detectors (aka nmi_watchdog).
 logo.gif
 	- full colour GIF image of Linux logo (penguin - Tux).
 logo.txt
@@ -240,8 +242,6 @@ netlabel/
 	- directory with information on the NetLabel subsystem.
 networking/
 	- directory with info on various aspects of networking with Linux.
-nmi_watchdog.txt
-	- info on NMI watchdog for SMP systems.
 nommu-mmap.txt
 	- documentation about no-mmu memory mapping support.
 numastat.txt

Documentation/DocBook/media/Makefile

@@ -56,15 +56,15 @@ FUNCS = \
 	write \
 
 IOCTLS = \
-	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/videodev2.h) \
-	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/audio.h) \
-	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/ca.h) \
-	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/dmx.h) \
-	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/frontend.h) \
-	$(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/net.h) \
-	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/video.h) \
-	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/media.h) \
-	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/v4l2-subdev.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/audio.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/ca.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/dmx.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/frontend.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/net.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/video.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \
 	VIDIOC_SUBDEV_G_FRAME_INTERVAL \
 	VIDIOC_SUBDEV_S_FRAME_INTERVAL \
 	VIDIOC_SUBDEV_ENUM_MBUS_CODE \
@@ -74,32 +74,32 @@ IOCTLS = \
 	VIDIOC_SUBDEV_S_SELECTION \
 
 TYPES = \
-	$(shell perl -ne 'print "$$1 " if /^typedef\s+[^\s]+\s+([^\s]+)\;/' $(srctree)/include/linux/videodev2.h) \
-	$(shell perl -ne 'print "$$1 " if /^}\s+([a-z0-9_]+_t)/' $(srctree)/include/linux/dvb/frontend.h)
+	$(shell perl -ne 'print "$$1 " if /^typedef\s+[^\s]+\s+([^\s]+)\;/' $(srctree)/include/uapi/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if /^}\s+([a-z0-9_]+_t)/' $(srctree)/include/uapi/linux/dvb/frontend.h)
 
 ENUMS = \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/videodev2.h) \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/audio.h) \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/ca.h) \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/dmx.h) \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/frontend.h) \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/net.h) \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/video.h) \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/media.h) \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-mediabus.h) \
-	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-subdev.h)
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/audio.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/ca.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/dmx.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/frontend.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/net.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/video.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h)
 
 STRUCTS = \
-	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/videodev2.h) \
-	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s\{]+)\s*/)' $(srctree)/include/linux/dvb/audio.h) \
-	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/ca.h) \
-	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/dmx.h) \
-	$(shell perl -ne 'print "$$1 " if (!/dtv\_cmds\_h/ && /^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/frontend.h) \
-	$(shell perl -ne 'print "$$1 " if (/^struct\s+([A-Z][^\s]+)\s+/)' $(srctree)/include/linux/dvb/net.h) \
-	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/video.h) \
-	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/media.h) \
-	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-subdev.h) \
-	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-mediabus.h)
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s\{]+)\s*/)' $(srctree)/include/uapi/linux/dvb/audio.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/ca.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/dmx.h) \
+	$(shell perl -ne 'print "$$1 " if (!/dtv\_cmds\_h/ && /^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/frontend.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([A-Z][^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/net.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/video.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h)
 
 ERRORS = \
 	E2BIG \
@@ -205,7 +205,7 @@ $(MEDIA_OBJ_DIR)/v4l2.xml: $(OBJIMGFILES)
 	@(ln -sf $(MEDIA_SRC_DIR)/v4l/*xml $(MEDIA_OBJ_DIR)/)
 	@(ln -sf $(MEDIA_SRC_DIR)/dvb/*xml $(MEDIA_OBJ_DIR)/)
 
-$(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/linux/videodev2.h $(MEDIA_OBJ_DIR)/v4l2.xml
+$(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/uapi/linux/videodev2.h $(MEDIA_OBJ_DIR)/v4l2.xml
 	@$($(quiet)gen_xml)
 	@(					\
 	echo "<programlisting>") > $@
@@ -216,7 +216,7 @@ $(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/linux/videodev2.h $(MEDIA_O
 	@(					\
 	echo "</programlisting>") >> $@
 
-$(MEDIA_OBJ_DIR)/audio.h.xml: $(srctree)/include/linux/dvb/audio.h $(MEDIA_OBJ_DIR)/v4l2.xml
+$(MEDIA_OBJ_DIR)/audio.h.xml: $(srctree)/include/uapi/linux/dvb/audio.h $(MEDIA_OBJ_DIR)/v4l2.xml
 	@$($(quiet)gen_xml)
 	@(					\
 	echo "<programlisting>") > $@
@@ -227,7 +227,7 @@ $(MEDIA_OBJ_DIR)/audio.h.xml: $(srctree)/include/linux/dvb/audio.h $(MEDIA_OBJ_D
 	@(					\
 	echo "</programlisting>") >> $@
 
-$(MEDIA_OBJ_DIR)/ca.h.xml: $(srctree)/include/linux/dvb/ca.h $(MEDIA_OBJ_DIR)/v4l2.xml
+$(MEDIA_OBJ_DIR)/ca.h.xml: $(srctree)/include/uapi/linux/dvb/ca.h $(MEDIA_OBJ_DIR)/v4l2.xml
 	@$($(quiet)gen_xml)
 	@(					\
 	echo "<programlisting>") > $@
@@ -238,7 +238,7 @@ $(MEDIA_OBJ_DIR)/ca.h.xml: $(srctree)/include/linux/dvb/ca.h $(MEDIA_OBJ_DIR)/v4
 	@(					\
 	echo "</programlisting>") >> $@
 
-$(MEDIA_OBJ_DIR)/dmx.h.xml: $(srctree)/include/linux/dvb/dmx.h $(MEDIA_OBJ_DIR)/v4l2.xml
+$(MEDIA_OBJ_DIR)/dmx.h.xml: $(srctree)/include/uapi/linux/dvb/dmx.h $(MEDIA_OBJ_DIR)/v4l2.xml
 	@$($(quiet)gen_xml)
 	@(					\
 	echo "<programlisting>") > $@
@@ -249,7 +249,7 @@ $(MEDIA_OBJ_DIR)/dmx.h.xml: $(srctree)/include/linux/dvb/dmx.h $(MEDIA_OBJ_DIR)/
 	@(					\
 	echo "</programlisting>") >> $@
 
-$(MEDIA_OBJ_DIR)/frontend.h.xml: $(srctree)/include/linux/dvb/frontend.h $(MEDIA_OBJ_DIR)/v4l2.xml
+$(MEDIA_OBJ_DIR)/frontend.h.xml: $(srctree)/include/uapi/linux/dvb/frontend.h $(MEDIA_OBJ_DIR)/v4l2.xml
 	@$($(quiet)gen_xml)
 	@(					\
 	echo "<programlisting>") > $@
@@ -260,7 +260,7 @@ $(MEDIA_OBJ_DIR)/frontend.h.xml: $(srctree)/include/linux/dvb/frontend.h $(MEDIA
 	@(					\
 	echo "</programlisting>") >> $@
 
-$(MEDIA_OBJ_DIR)/net.h.xml: $(srctree)/include/linux/dvb/net.h $(MEDIA_OBJ_DIR)/v4l2.xml
+$(MEDIA_OBJ_DIR)/net.h.xml: $(srctree)/include/uapi/linux/dvb/net.h $(MEDIA_OBJ_DIR)/v4l2.xml
 	@$($(quiet)gen_xml)
 	@(					\
 	echo "<programlisting>") > $@
@@ -271,7 +271,7 @@ $(MEDIA_OBJ_DIR)/net.h.xml: $(srctree)/include/linux/dvb/net.h $(MEDIA_OBJ_DIR)/
 	@(					\
 	echo "</programlisting>") >> $@
 
-$(MEDIA_OBJ_DIR)/video.h.xml: $(srctree)/include/linux/dvb/video.h $(MEDIA_OBJ_DIR)/v4l2.xml
+$(MEDIA_OBJ_DIR)/video.h.xml: $(srctree)/include/uapi/linux/dvb/video.h $(MEDIA_OBJ_DIR)/v4l2.xml
 	@$($(quiet)gen_xml)
 	@(					\
 	echo "<programlisting>") > $@

Documentation/DocBook/networking.tmpl

@@ -56,7 +56,7 @@
 !Enet/core/filter.c
      </sect1>
      <sect1><title>Generic Network Statistics</title>
-!Iinclude/linux/gen_stats.h
+!Iinclude/uapi/linux/gen_stats.h
 !Enet/core/gen_stats.c
 !Enet/core/gen_estimator.c
      </sect1>
@@ -80,7 +80,7 @@
 !Enet/wimax/op-rfkill.c
 !Enet/wimax/stack.c
 !Iinclude/net/wimax.h
-!Iinclude/linux/wimax.h
+!Iinclude/uapi/linux/wimax.h
      </sect1>
   </chapter>
 

Documentation/IPMI.txt

@@ -42,13 +42,7 @@ The driver interface depends on your hardware.  If your system
 properly provides the SMBIOS info for IPMI, the driver will detect it
 and just work.  If you have a board with a standard interface (These
 will generally be either "KCS", "SMIC", or "BT", consult your hardware
-manual), choose the 'IPMI SI handler' option.  A driver also exists
-for direct I2C access to the IPMI management controller.  Some boards
-support this, but it is unknown if it will work on every board.  For
-this, choose 'IPMI SMBus handler', but be ready to try to do some
-figuring to see if it will work on your system if the SMBIOS/APCI
-information is wrong or not present.  It is fairly safe to have both
-these enabled and let the drivers auto-detect what is present.
+manual), choose the 'IPMI SI handler' option.
 
 You should generally enable ACPI on your system, as systems with IPMI
 can have ACPI tables describing them.
@@ -58,8 +52,7 @@ their job correctly, the IPMI controller should be automatically
 detected (via ACPI or SMBIOS tables) and should just work.  Sadly,
 many boards do not have this information.  The driver attempts
 standard defaults, but they may not work.  If you fall into this
-situation, you need to read the section below named 'The SI Driver' or
-"The SMBus Driver" on how to hand-configure your system.
+situation, you need to read the section below named 'The SI Driver'.
 
 IPMI defines a standard watchdog timer.  You can enable this with the
 'IPMI Watchdog Timer' config option.  If you compile the driver into
@@ -104,12 +97,7 @@ driver, each open file for this device ties in to the message handler
 as an IPMI user.
 
 ipmi_si - A driver for various system interfaces.  This supports KCS,
-SMIC, and BT interfaces.  Unless you have an SMBus interface or your
-own custom interface, you probably need to use this.
-
-ipmi_smb - A driver for accessing BMCs on the SMBus. It uses the
-I2C kernel driver's SMBus interfaces to send and receive IPMI messages
-over the SMBus.
+SMIC, and BT interfaces.
 
 ipmi_watchdog - IPMI requires systems to have a very capable watchdog
 timer.  This driver implements the standard Linux watchdog timer
@@ -482,53 +470,6 @@ for specifying an interface.  Note that when removing an interface,
 only the first three parameters (si type, address type, and address)
 are used for the comparison.  Any options are ignored for removing.
 
-The SMBus Driver
-----------------
-
-The SMBus driver allows up to 4 SMBus devices to be configured in the
-system.  By default, the driver will register any SMBus interfaces it finds
-in the I2C address range of 0x20 to 0x4f on any adapter.  You can change this
-at module load time (for a module) with:
-
-  modprobe ipmi_smb.o
-	addr=<adapter1>,<i2caddr1>[,<adapter2>,<i2caddr2>[,...]]
-	dbg=<flags1>,<flags2>...
-	[defaultprobe=1] [dbg_probe=1]
-
-The addresses are specified in pairs, the first is the adapter ID and the
-second is the I2C address on that adapter.
-
-The debug flags are bit flags for each BMC found, they are:
-IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8
-
-Setting smb_defaultprobe to zero disabled the default probing of SMBus
-interfaces at address range 0x20 to 0x4f.  This means that only the
-BMCs specified on the smb_addr line will be detected.
-
-Setting smb_dbg_probe to 1 will enable debugging of the probing and
-detection process for BMCs on the SMBusses.
-
-Discovering the IPMI compliant BMC on the SMBus can cause devices
-on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI
-message as a block write to the I2C bus and waits for a response.
-This action can be detrimental to some I2C devices. It is highly recommended
-that the known I2c address be given to the SMBus driver in the smb_addr
-parameter. The default address range will not be used when a smb_addr
-parameter is provided.
-
-When compiled into the kernel, the addresses can be specified on the
-kernel command line as:
-
-  ipmb_smb.addr=<adapter1>,<i2caddr1>[,<adapter2>,<i2caddr2>[,...]]
-	ipmi_smb.dbg=<flags1>,<flags2>...
-	ipmi_smb.defaultprobe=0 ipmi_smb.dbg_probe=1
-
-These are the same options as on the module command line.
-
-Note that you might need some I2C changes if CONFIG_IPMI_PANIC_EVENT
-is enabled along with this, so the I2C driver knows to run to
-completion during sending a panic event.
-
 
 Other Pieces
 ------------

Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt

@@ -93,7 +93,7 @@ Valid values for pin and group names are:
 
     With some exceptions, these support nvidia,high-speed-mode,
     nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
-    nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
+    nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling.
 
     drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
     drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,

Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt

@@ -83,7 +83,7 @@ Valid values for pin and group names are:
   drive groups:
 
     These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
-    nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
+    nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
     support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
 
     ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,

Documentation/firmware_class/README

@@ -18,32 +18,40 @@
  High level behavior (mixed):
  ============================
 
- kernel(driver): calls request_firmware(&fw_entry, $FIRMWARE, device)
-
- userspace:
+ 1), kernel(driver):
+	- calls request_firmware(&fw_entry, $FIRMWARE, device)
+	- kernel searchs the fimware image with name $FIRMWARE directly
+	in the below search path of root filesystem:
+		"/lib/firmware/updates/" UTS_RELEASE,
+		"/lib/firmware/updates",
+		"/lib/firmware/" UTS_RELEASE,
+		"/lib/firmware"
+	- If found, goto 7), else goto 2)
+
+ 2), userspace:
  	- /sys/class/firmware/xxx/{loading,data} appear.
 	- hotplug gets called with a firmware identifier in $FIRMWARE
 	  and the usual hotplug environment.
 		- hotplug: echo 1 > /sys/class/firmware/xxx/loading
 
- kernel: Discard any previous partial load.
+ 3), kernel: Discard any previous partial load.
 
- userspace:
+ 4), userspace:
 		- hotplug: cat appropriate_firmware_image > \
 					/sys/class/firmware/xxx/data
 
- kernel: grows a buffer in PAGE_SIZE increments to hold the image as it
+ 5), kernel: grows a buffer in PAGE_SIZE increments to hold the image as it
 	 comes in.
 
- userspace:
+ 6), userspace:
 		- hotplug: echo 0 > /sys/class/firmware/xxx/loading
 
- kernel: request_firmware() returns and the driver has the firmware
+ 7), kernel: request_firmware() returns and the driver has the firmware
 	 image in fw_entry->{data,size}. If something went wrong
 	 request_firmware() returns non-zero and fw_entry is set to
 	 NULL.
 
- kernel(driver): Driver code calls release_firmware(fw_entry) releasing
+ 8), kernel(driver): Driver code calls release_firmware(fw_entry) releasing
 		 the firmware image and any related resource.
 
  High level behavior (driver code):

Documentation/hwmon/coretemp

@@ -105,6 +105,7 @@ Process		Processor					TjMax(C)
 		330/230						125
 		E680/660/640/620				90
 		E680T/660T/640T/620T				110
+		CE4170/4150/4110				110
 
 45nm		Core2 Processors
 		Solo ULV SU3500/3300				100

Documentation/hwmon/submitting-patches

@@ -60,8 +60,7 @@ increase the chances of your change being accepted.
 
 * Add the driver to Kconfig and Makefile in alphabetical order.
 
-* Make sure that all dependencies are listed in Kconfig. For new drivers, it
-  is most likely prudent to add a dependency on EXPERIMENTAL.
+* Make sure that all dependencies are listed in Kconfig.
 
 * Avoid forward declarations if you can. Rearrange the code if necessary.
 

Documentation/sysrq.txt

@@ -116,6 +116,7 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 'w'	- Dumps tasks that are in uninterruptable (blocked) state.
 
 'x'	- Used by xmon interface on ppc/powerpc platforms.
+          Show global PMU Registers on sparc64.
 
 'y'	- Show global CPU Registers [SPARC-64 specific]
 

Documentation/zh_CN/IRQ.txt

@@ -0,0 +1,39 @@
+Chinese translated version of Documentation/IRQ.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Eric W. Biederman <ebiederman@xmission.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/IRQ.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+英文版维护者： Eric W. Biederman <ebiederman@xmission.com>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+
+以下为正文
+---------------------------------------------------------------------
+何为 IRQ?
+
+一个 IRQ 是来自某个设备的一个中断请求。目前，它们可以来自一个硬件引脚，
+或来自一个数据包。多个设备可能连接到同个硬件引脚，从而共享一个 IRQ。
+
+一个 IRQ 编号是用于告知硬件中断源的内核标识。通常情况下，这是一个
+全局 irq_desc 数组的索引，但是除了在 linux/interrupt.h 中的实现，
+具体的细节是体系结构特定的。
+
+一个 IRQ 编号是设备上某个可能的中断源的枚举。通常情况下，枚举的编号是
+该引脚在系统内中断控制器的所有输入引脚中的编号。对于 ISA 总线中的情况，
+枚举的是在两个 i8259 中断控制器中 16 个输入引脚。
+
+架构可以对 IRQ 编号指定额外的含义，在硬件涉及任何手工配置的情况下，
+是被提倡的。ISA 的 IRQ 是一个分配这类额外含义的典型例子。

Documentation/zh_CN/arm64/booting.txt

@@ -0,0 +1,156 @@
+Chinese translated version of Documentation/arm64/booting.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/arm64/booting.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+
+以下为正文
+---------------------------------------------------------------------
+			启动 AArch64 Linux
+			==================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2012 年 09 月 07 日
+
+本文档基于 Russell King 的 ARM 启动文档，且适用于所有公开发布的
+AArch64 Linux 内核代码。
+
+AArch64 异常模型由多个异常级别（EL0 - EL3）组成，对于 EL0 和 EL1
+异常级有对应的安全和非安全模式。EL2 是系统管理级，且仅存在于
+非安全模式下。EL3 是最高特权级，且仅存在于安全模式下。
+
+基于本文档的目的，我们将简单地使用‘引导装载程序’（‘boot loader’）
+这个术语来定义在将控制权交给 Linux 内核前 CPU 上执行的所有软件。
+这可能包含安全监控和系统管理代码，或者它可能只是一些用于准备最小启动
+环境的指令。
+
+基本上，引导装载程序（至少）应实现以下操作：
+
+1、设置和初始化 RAM
+2、设置设备树数据
+3、解压内核映像
+4、调用内核映像
+
+
+1、设置和初始化 RAM
+-----------------
+
+必要性: 强制
+
+引导装载程序应该找到并初始化系统中所有内核用于保持系统变量数据的 RAM。
+这个操作的执行是设备依赖的。（它可能使用内部算法来自动定位和计算所有
+RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何引导装载程序
+设计者想到的匹配方法。）
+
+
+2、设置设备树数据
+---------------
+
+必要性: 强制
+
+设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个
+512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+映射此数据块。
+
+
+3、解压内核映像
+-------------
+
+必要性: 可选
+
+AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内核映像文件
+（比如 Image.gz），则需要通过引导装载程序（使用 gzip 等）来进行解压。
+若引导装载程序没有实现这个需求，就要使用非压缩内核映像文件。
+
+
+4、调用内核映像
+-------------
+
+必要性: 强制
+
+已解压的内核映像包含一个 32 字节的头，内容如下：
+
+  u32 magic	= 0x14000008;	/* 跳转到 stext, 小端 */
+  u32 res0	= 0;		/* 保留 */
+  u64 text_offset;		/* 映像装载偏移 */
+  u64 res1	= 0;		/* 保留 */
+  u64 res2	= 0;		/* 保留 */
+
+映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM
+的起始地址必须是以 2MB 对齐的。
+
+在跳转入内核前，必须符合以下状态：
+
+- 停止所有 DMA 设备，这样内存数据就不会因为虚假网络包或磁盘数据而
+  被破坏。这可能可以节省你许多的调试时间。
+
+- 主 CPU 通用寄存器设置
+  x0 = 系统 RAM 中设备树数据块（dtb）的物理地址。
+  x1 = 0 (保留，将来可能使用)
+  x2 = 0 (保留，将来可能使用)
+  x3 = 0 (保留，将来可能使用)
+
+- CPU 模式
+  所有形式的中断必须在 PSTATE.DAIF 中被屏蔽（Debug、SError、IRQ
+  和 FIQ）。
+  CPU 必须处于 EL2（推荐，可访问虚拟化扩展）或非安全 EL1 模式下。
+
+- 高速缓存、MMU
+  MMU 必须关闭。
+  指令缓存开启或关闭都可以。
+  数据缓存必须关闭且无效。
+  外部高速缓存（如果存在）必须配置并禁用。
+
+- 架构计时器
+  CNTFRQ 必须设定为计时器的频率。
+  如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
+  必须置位。
+
+- 一致性
+  通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
+  这可能要根据具体实现来定义初始化过程，以使能每个CPU上对维护操作的
+  接收。
+
+- 系统寄存器
+  在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
+  在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
+
+引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
+
+- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
+  数据块必须在每个 CPU 节点中包含以下内容：
+
+    1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。
+
+    2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+
+  引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
+  数据块。
+
+- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
+  给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
+  包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
+  发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
+  时，CPU 必须直接跳入此值所指向的地址。
+
+- 辅助 CPU 通用寄存器设置
+  x0 = 0 (保留，将来可能使用)
+  x1 = 0 (保留，将来可能使用)
+  x2 = 0 (保留，将来可能使用)
+  x3 = 0 (保留，将来可能使用)

Documentation/zh_CN/arm64/memory.txt

@@ -0,0 +1,93 @@
+Chinese translated version of Documentation/arm64/memory.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Catalin Marinas <catalin.marinas@arm.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/arm64/memory.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
+中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+
+以下为正文
+---------------------------------------------------------------------
+		     Linux 在 AArch64 中的内存布局
+		     ===========================
+
+作者: Catalin Marinas <catalin.marinas@arm.com>
+日期: 2012 年 02 月 20 日
+
+本文档描述 AArch64 Linux 内核所使用的虚拟内存布局。此构架可以实现
+页大小为 4KB 的 4 级转换表和页大小为 64KB 的 3 级转换表。
+
+AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和内核
+都有 39-bit (512GB) 的虚拟地址空间。对于页大小为 64KB的配置，仅
+使用 2 级转换表，但内存布局相同。
+
+用户地址空间的 63:39 位为 0，而内核地址空间的相应位为 1。TTBRx 的
+选择由虚拟地址的 63 位给出。swapper_pg_dir 仅包含内核（全局）映射，
+而用户 pgd 仅包含用户（非全局）映射。swapper_pgd_dir 地址被写入
+TTBR1 中，且从不写入 TTBR0。
+
+
+AArch64 Linux 内存布局：
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000007fffffffff	 512GB		用户空间
+
+ffffff8000000000	ffffffbbfffcffff	~240GB		vmalloc
+
+ffffffbbfffd0000	ffffffbcfffdffff	  64KB		[防护页]
+
+ffffffbbfffe0000	ffffffbcfffeffff	  64KB		PCI I/O 空间
+
+ffffffbbffff0000	ffffffbcffffffff	  64KB		[防护页]
+
+ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
+
+ffffffbe00000000	ffffffbffbffffff	  ~8GB		[防护页，未来用于 vmmemap]
+
+ffffffbffc000000	ffffffbfffffffff	  64MB		模块
+
+ffffffc000000000	ffffffffffffffff	 256GB		内存空间
+
+
+4KB 页大小的转换表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ |                 |         |         |         |         |
+ |                 |         |         |         |         v
+ |                 |         |         |         |   [11:0]  页内偏移
+ |                 |         |         |         +-> [20:12] L3 索引
+ |                 |         |         +-----------> [29:21] L2 索引
+ |                 |         +---------------------> [38:30] L1 索引
+ |                 +-------------------------------> [47:39] L0 索引 (未使用)
+ +-------------------------------------------------> [63] TTBR0/1
+
+
+64KB 页大小的转换表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ |                 |    |               |              |
+ |                 |    |               |              v
+ |                 |    |               |            [15:0]  页内偏移
+ |                 |    |               +----------> [28:16] L3 索引
+ |                 |    +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
+ |                 +-------------------------------> [47:42] L1 索引 (未使用)
+ +-------------------------------------------------> [63] TTBR0/1

MAINTAINERS

@@ -235,6 +235,7 @@ F:	drivers/platform/x86/acer-wmi.c
 
 ACPI
 M:	Len Brown <lenb@kernel.org>
+M:	Rafael J. Wysocki <rjw@sisk.pl>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 Q:	http://patchwork.kernel.org/project/linux-acpi/list/
@@ -2801,6 +2802,7 @@ F:	sound/usb/misc/ua101.c
 EXTENSIBLE FIRMWARE INTERFACE (EFI)
 M:	Matt Fleming <matt.fleming@intel.com>
 L:	linux-efi@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
 S:	Maintained
 F:	Documentation/x86/efi-stub.txt
 F:	arch/ia64/kernel/efi.c
@@ -4372,7 +4374,7 @@ F:	Documentation/scsi/53c700.txt
 F:	drivers/scsi/53c700*
 
 LED SUBSYSTEM
-M:	Bryan Wu <bryan.wu@canonical.com>
+M:	Bryan Wu <cooloney@gmail.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
@@ -5019,6 +5021,20 @@ F:	net/ipv6/
 F:	include/net/ip*
 F:	arch/x86/net/*
 
+NETWORKING [IPSEC]
+M:	Steffen Klassert <steffen.klassert@secunet.com>
+M:	Herbert Xu <herbert@gondor.apana.org.au>
+M:	"David S. Miller" <davem@davemloft.net>
+L:	netdev@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+S:	Maintained
+F:	net/xfrm/
+F:	net/key/
+F:	net/ipv4/xfrm*
+F:	net/ipv6/xfrm*
+F:	include/uapi/linux/xfrm.h
+F:	include/net/xfrm.h
+
 NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
 M:	Paul Moore <paul@paul-moore.com>
 L:	netdev@vger.kernel.org
@@ -7731,6 +7747,13 @@ W:	http://www.ideasonboard.org/uvc/
 S:	Maintained
 F:	drivers/media/usb/uvc/
 
+USB WEBCAM GADGET
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/usb/gadget/*uvc*.c
+F:	drivers/usb/gadget/webcam.c
+
 USB WIRELESS RNDIS DRIVER (rndis_wlan)
 M:	Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
 L:	linux-wireless@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
@@ -437,7 +437,9 @@ endif
 PHONY += asm-generic
 asm-generic:
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
-	            obj=arch/$(SRCARCH)/include/generated/asm
+	            src=asm obj=arch/$(SRCARCH)/include/generated/asm
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
 
 # To make sure we do not include .config for any of the *config targets
 # catch them early, and hand them over to scripts/kconfig/Makefile
@@ -717,6 +719,17 @@ endif # INSTALL_MOD_STRIP
 export mod_strip_cmd
 
 
+ifeq ($(CONFIG_MODULE_SIG),y)
+MODSECKEY = ./signing_key.priv
+MODPUBKEY = ./signing_key.x509
+export MODPUBKEY
+mod_sign_cmd = perl $(srctree)/scripts/sign-file $(MODSECKEY) $(MODPUBKEY)
+else
+mod_sign_cmd = true
+endif
+export mod_sign_cmd
+
+
 ifeq ($(KBUILD_EXTMOD),)
 core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
 

arch/alpha/include/asm/thread_info.h

@@ -7,6 +7,7 @@
 #include <asm/processor.h>
 #include <asm/types.h>
 #include <asm/hwrpb.h>
+#include <asm/sysinfo.h>
 #endif
 
 #ifndef __ASSEMBLY__
@@ -21,6 +22,7 @@ struct thread_info {
 	mm_segment_t		addr_limit;	/* thread address space */
 	unsigned		cpu;		/* current CPU */
 	int			preempt_count; /* 0 => preemptable, <0 => BUG */
+	unsigned int		status;		/* thread-synchronous flags */
 
 	int bpt_nsaved;
 	unsigned long bpt_addr[2];		/* breakpoint handling  */
@@ -63,8 +65,6 @@ register struct thread_info *__current_thread_info __asm__("$8");
  * - these are process state flags and used from assembly
  * - pending work-to-be-done flags come first and must be assigned to be
  *   within bits 0 to 7 to fit in and immediate operand.
- * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
- *   control flags.
  *
  * TIF_SYSCALL_TRACE is known to be 0 via blbs.
  */
@@ -72,18 +72,12 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	8	/* poll_idle is polling NEED_RESCHED */
 #define TIF_DIE_IF_KERNEL	9	/* dik recursion lock */
-#define TIF_UAC_NOPRINT		10	/* ! Preserve sequence of following */
-#define TIF_UAC_NOFIX		11	/* ! flags as they match            */
-#define TIF_UAC_SIGBUS		12	/* ! userspace part of 'osf_sysinfo' */
 #define TIF_MEMDIE		13	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	14	/* restore signal mask in do_signal */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 
 /* Work to do on interrupt/exception return.  */
@@ -94,29 +88,63 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
 				 | _TIF_SYSCALL_TRACE)
 
-#define ALPHA_UAC_SHIFT		TIF_UAC_NOPRINT
-#define ALPHA_UAC_MASK		(1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
-				 1 << TIF_UAC_SIGBUS)
+#define TS_UAC_NOPRINT		0x0001	/* ! Preserve the following three */
+#define TS_UAC_NOFIX		0x0002	/* ! flags as they match          */
+#define TS_UAC_SIGBUS		0x0004	/* ! userspace part of 'osf_sysinfo' */
+#define TS_RESTORE_SIGMASK	0x0008	/* restore signal mask in do_signal() */
+#define TS_POLLING		0x0010	/* idle task polling need_resched,
+					   skip sending interrupt */
 
-#define SET_UNALIGN_CTL(task,value)	({				     \
-	task_thread_info(task)->flags = ((task_thread_info(task)->flags &    \
-		~ALPHA_UAC_MASK)					     \
-		| (((value) << ALPHA_UAC_SHIFT)       & (1<<TIF_UAC_NOPRINT))\
-		| (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \
-		| (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	WARN_ON(!test_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags));
+}
+static inline void clear_restore_sigmask(void)
+{
+	current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+}
+static inline bool test_restore_sigmask(void)
+{
+	return current_thread_info()->status & TS_RESTORE_SIGMASK;
+}
+static inline bool test_and_clear_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	if (!(ti->status & TS_RESTORE_SIGMASK))
+		return false;
+	ti->status &= ~TS_RESTORE_SIGMASK;
+	return true;
+}
+#endif
+
+#define SET_UNALIGN_CTL(task,value)	({				\
+	__u32 status = task_thread_info(task)->status & ~UAC_BITMASK;	\
+	if (value & PR_UNALIGN_NOPRINT)					\
+		status |= TS_UAC_NOPRINT;				\
+	if (value & PR_UNALIGN_SIGBUS)					\
+		status |= TS_UAC_SIGBUS;				\
+	if (value & 4)	/* alpha-specific */				\
+		status |= TS_UAC_NOFIX;					\
+	task_thread_info(task)->status = status;			\
 	0; })
 
 #define GET_UNALIGN_CTL(task,value)	({				\
-	put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\
-		  >> ALPHA_UAC_SHIFT					\
-		 | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\
-		 >> (ALPHA_UAC_SHIFT + 1)				\
-		 | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\
-		 >> (ALPHA_UAC_SHIFT - 1),				\
-		 (int __user *)(value));				\
+	__u32 status = task_thread_info(task)->status & ~UAC_BITMASK;	\
+	__u32 res = 0;							\
+	if (status & TS_UAC_NOPRINT)					\
+		res |= PR_UNALIGN_NOPRINT;				\
+	if (status & TS_UAC_SIGBUS)					\
+		res |= PR_UNALIGN_SIGBUS;				\
+	if (status & TS_UAC_NOFIX)					\
+		res |= 4;						\
+	put_user(res, (int __user *)(value));				\
 	})
 
-#define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
-
 #endif /* __KERNEL__ */
 #endif /* _ALPHA_THREAD_INFO_H */

arch/alpha/kernel/osf_sys.c

@@ -793,8 +793,7 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
  	case GSI_UACPROC:
 		if (nbytes < sizeof(unsigned int))
 			return -EINVAL;
-		w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) &
-			UAC_BITMASK;
+		w = current_thread_info()->status & UAC_BITMASK;
 		if (put_user(w, (unsigned int __user *)buffer))
 			return -EFAULT;
  		return 1;
@@ -904,24 +903,20 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 		break;
 
  	case SSI_NVPAIRS: {
-		unsigned long v, w, i;
-		unsigned int old, new;
+		unsigned __user *p = buffer;
+		unsigned i;
 		
- 		for (i = 0; i < nbytes; ++i) {
+		for (i = 0, p = buffer; i < nbytes; ++i, p += 2) {
+			unsigned v, w, status;
 
- 			if (get_user(v, 2*i + (unsigned int __user *)buffer))
- 				return -EFAULT;
- 			if (get_user(w, 2*i + 1 + (unsigned int __user *)buffer))
+			if (get_user(v, p) || get_user(w, p + 1))
  				return -EFAULT;
  			switch (v) {
  			case SSIN_UACPROC:
-			again:
-				old = current_thread_info()->flags;
-				new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT);
-				new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT;
-				if (cmpxchg(&current_thread_info()->flags,
-					    old, new) != old)
-					goto again;
+				w &= UAC_BITMASK;
+				status = current_thread_info()->status;
+				status = (status & ~UAC_BITMASK) | w;
+				current_thread_info()->status = status;
  				break;
  
  			default:

arch/alpha/kernel/process.c

@@ -49,7 +49,7 @@ EXPORT_SYMBOL(pm_power_off);
 void
 cpu_idle(void)
 {
-	set_thread_flag(TIF_POLLING_NRFLAG);
+	current_thread_info()->status |= TS_POLLING;
 
 	while (1) {
 		/* FIXME -- EV6 and LCA45 know how to power down

arch/alpha/kernel/traps.c

@@ -780,17 +780,17 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	/* Check the UAC bits to decide what the user wants us to do
 	   with the unaliged access.  */
 
-	if (!test_thread_flag (TIF_UAC_NOPRINT)) {
+	if (!(current_thread_info()->status & TS_UAC_NOPRINT)) {
 		if (__ratelimit(&ratelimit)) {
 			printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
 			       current->comm, task_pid_nr(current),
 			       regs->pc - 4, va, opcode, reg);
 		}
 	}
-	if (test_thread_flag (TIF_UAC_SIGBUS))
+	if ((current_thread_info()->status & TS_UAC_SIGBUS))
 		goto give_sigbus;
 	/* Not sure why you'd want to use this, but... */
-	if (test_thread_flag (TIF_UAC_NOFIX))
+	if ((current_thread_info()->status & TS_UAC_NOFIX))
 		return;
 
 	/* Don't bother reading ds in the access check since we already

arch/arm/Kconfig

@@ -1603,8 +1603,8 @@ config NR_CPUS
 	default "4"
 
 config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP && HOTPLUG
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1645,8 +1645,8 @@ config HZ
 	default 100
 
 config THUMB2_KERNEL
-	bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
-	depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
+	bool "Compile the kernel in Thumb-2 mode"
+	depends on CPU_V7 && !CPU_V6 && !CPU_V6K
 	select AEABI
 	select ARM_ASM_UNIFIED
 	select ARM_UNWIND
@@ -1850,6 +1850,7 @@ config XEN_DOM0
 config XEN
 	bool "Xen guest support on ARM (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && ARM && OF
+	depends on CPU_V7 && !CPU_V6
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 

arch/arm/Makefile

@@ -21,8 +21,6 @@ endif
 OBJCOPYFLAGS	:=-O binary -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
-# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
-KBUILD_CFLAGS	+=$(call cc-option,-marm,)
 
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
@@ -105,17 +103,20 @@ endif
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
 AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
-CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
-AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+CFLAGS_ISA	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
 # Work around buggy relocation from gas if requested:
 ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
 CFLAGS_MODULE	+=-fno-optimize-sibling-calls
 endif
+else
+CFLAGS_ISA	:=$(call cc-option,-marm,)
+AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 

arch/arm/boot/Makefile

@@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y)
 
 $(obj)/xipImage: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
+	$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
+	$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -90,7 +90,7 @@ fi
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	@echo '  Image $@ is ready'
+	$(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
+	$(kecho) '  Kernel: $@ is ready'
 
 PHONY += initrd FORCE
 initrd:

arch/arm/boot/dts/Makefile

@@ -25,6 +25,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-trats.dtb \
 	exynos5250-smdk5250.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
+	integratorcp.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-dns325.dtb \

arch/arm/boot/dts/dove.dtsi

@@ -4,21 +4,32 @@
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
 
-	interrupt-parent = <&intc>;
-
-	intc: interrupt-controller {
-		compatible = "marvell,orion-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xf1020204 0x04>,
-		      <0xf1020214 0x04>;
-	};
-
-	mbus@f1000000 {
+	soc@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x4000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+
+		ranges = <0xc8000000 0xc8000000 0x0100000   /* CESA SRAM   1M */
+		          0xe0000000 0xe0000000 0x8000000   /* PCIe0 Mem 128M */
+		          0xe8000000 0xe8000000 0x8000000   /* PCIe1 Mem 128M */
+		          0xf0000000 0xf0000000 0x0100000   /* ScratchPad  1M */
+		          0x00000000 0xf1000000 0x1000000   /* SB/NB regs 16M */
+		          0xf2000000 0xf2000000 0x0100000   /* PCIe0 I/O   1M */
+		          0xf2100000 0xf2100000 0x0100000   /* PCIe0 I/O   1M */
+		          0xf8000000 0xf8000000 0x8000000>; /* BootROM   128M */
+
+		l2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20204 0x04>, <0x20214 0x04>;
+		};
 
 		uart0: serial@12000 {
 			compatible = "ns16550a";
@@ -56,11 +67,6 @@
 			status = "disabled";
 		};
 
-		wdt: wdt@20300 {
-			compatible = "marvell,orion-wdt";
-			reg = <0x20300 0x28>;
-		};
-
 		gpio0: gpio@d0400 {
 			compatible = "marvell,orion-gpio";
 			#gpio-cells = <2>;
@@ -139,5 +145,14 @@
 			nr-ports = <1>;
 			status = "disabled";
 		};
+
+		crypto: crypto@30000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x30000 0x10000>,
+			      <0xc8000000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <31>;
+			status = "okay";
+		};
 	};
 };

arch/arm/boot/dts/imx6q-arm2.dts

@@ -37,6 +37,13 @@
 					pinctrl_hog: hoggrp {
 						fsl,pins = <
 							176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+						>;
+					};
+				};
+
+				arm2 {
+					pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+						fsl,pins = <
 							1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
 							1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
 						>;
@@ -58,7 +65,8 @@
 				wp-gpios = <&gpio6 14 0>;
 				vmmc-supply = <&reg_3p3v>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1>;
+				pinctrl-0 = <&pinctrl_usdhc3_1
+					     &pinctrl_usdhc3_arm2>;
 				status = "okay";
 			};
 

arch/arm/boot/dts/kirkwood-lsxl.dtsi

@@ -48,17 +48,19 @@
 		#size-cells = <0>;
 		button@1 {
 			label = "Function Button";
-			linux,code = <132>;
+			linux,code = <357>;
 			gpios = <&gpio1 9 1>;
 		};
 		button@2 {
 			label = "Power-on Switch";
-			linux,code = <116>;
+			linux,code = <0>;
+			linux,input-type = <5>;
 			gpios = <&gpio1 10 1>;
 		};
 		button@3 {
 			label = "Power-auto Switch";
-			linux,code = <142>;
+			linux,code = <1>;
+			linux,input-type = <5>;
 			gpios = <&gpio1 11 1>;
 		};
 	};
@@ -67,28 +69,28 @@
 		compatible = "gpio-leds";
 
 		led@1 {
-			label = "lschlv2:blue:func";
+			label = "lsxl:blue:func";
 			gpios = <&gpio1 4 1>;
 		};
 
 		led@2 {
-			label = "lschlv2:red:alarm";
+			label = "lsxl:red:alarm";
 			gpios = <&gpio1 5 1>;
 		};
 
 		led@3 {
-			label = "lschlv2:amber:info";
+			label = "lsxl:amber:info";
 			gpios = <&gpio1 6 1>;
 		};
 
 		led@4 {
-			label = "lschlv2:blue:power";
+			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 1>;
 			linux,default-trigger = "default-on";
 		};
 
 		led@5 {
-			label = "lschlv2:red:func";
+			label = "lsxl:red:func";
 			gpios = <&gpio1 16 1>;
 		};
 	};

arch/arm/boot/dts/wm8505.dtsi

@@ -71,13 +71,13 @@
 		ehci@d8007100 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007100 0x200>;
-			interrupts = <43>;
+			interrupts = <1>;
 		};
 
 		uhci@d8007300 {
 			compatible = "platform-uhci";
 			reg = <0xd8007300 0x200>;
-			interrupts = <43>;
+			interrupts = <0>;
 		};
 
 		fb@d8050800 {

arch/arm/include/asm/flat.h

@@ -8,7 +8,7 @@
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
+#define	flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp))
 #define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
 #define	flat_get_relocate_addr(rel)		(rel)
 #define	flat_set_persistent(relval, p)		0

arch/arm/include/asm/uaccess.h

@@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long);
 #define USER_DS			KERNEL_DS
 
 #define segment_eq(a,b)		(1)
-#define __addr_ok(addr)		(1)
-#define __range_ok(addr,size)	(0)
+#define __addr_ok(addr)		((void)(addr),1)
+#define __range_ok(addr,size)	((void)(addr),0)
 #define get_fs()		(KERNEL_DS)
 
 static inline void set_fs(mm_segment_t fs)

arch/arm/include/asm/xen/interface.h

@@ -29,16 +29,22 @@
 
 #ifndef __ASSEMBLY__
 /* Explicitly size integers that represent pfns in the interface with
- * Xen so that we can have one ABI that works for 32 and 64 bit guests. */
+ * Xen so that we can have one ABI that works for 32 and 64 bit guests.
+ * Note that this means that the xen_pfn_t type may be capable of
+ * representing pfn's which the guest cannot represent in its own pfn
+ * type. However since pfn space is controlled by the guest this is
+ * fine since it simply wouldn't be able to create any sure pfns in
+ * the first place.
+ */
 typedef uint64_t xen_pfn_t;
+#define PRI_xen_pfn "llx"
 typedef uint64_t xen_ulong_t;
+#define PRI_xen_ulong "llx"
 /* Guest handles for primitive C types. */
 __DEFINE_GUEST_HANDLE(uchar, unsigned char);
 __DEFINE_GUEST_HANDLE(uint,  unsigned int);
-__DEFINE_GUEST_HANDLE(ulong, unsigned long);
 DEFINE_GUEST_HANDLE(char);
 DEFINE_GUEST_HANDLE(int);
-DEFINE_GUEST_HANDLE(long);
 DEFINE_GUEST_HANDLE(void);
 DEFINE_GUEST_HANDLE(uint64_t);
 DEFINE_GUEST_HANDLE(uint32_t);

arch/arm/include/asm/xen/page.h

@@ -10,7 +10,7 @@
 #include <xen/interface/grant_table.h>
 
 #define pfn_to_mfn(pfn)			(pfn)
-#define phys_to_machine_mapping_valid	(1)
+#define phys_to_machine_mapping_valid(pfn) (1)
 #define mfn_to_pfn(mfn)			(mfn)
 #define mfn_to_virt(m)			(__va(mfn_to_pfn(m) << PAGE_SHIFT))
 
@@ -30,6 +30,8 @@ typedef struct xpaddr {
 #define XMADDR(x)	((xmaddr_t) { .maddr = (x) })
 #define XPADDR(x)	((xpaddr_t) { .paddr = (x) })
 
+#define INVALID_P2M_ENTRY      (~0UL)
+
 static inline xmaddr_t phys_to_machine(xpaddr_t phys)
 {
 	unsigned offset = phys.paddr & ~PAGE_MASK;
@@ -74,9 +76,14 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte)
 	return 0;
 }
 
+static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+	return true;
+}
+
 static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 {
-	BUG();
-	return false;
+	return __set_phys_to_machine(pfn, mfn);
 }
 #endif /* _ASM_ARM_XEN_PAGE_H */

arch/arm/kernel/entry-common.S

@@ -88,9 +88,9 @@ ENTRY(ret_from_fork)
 	bl	schedule_tail
 	cmp	r5, #0
 	movne	r0, r4
-	movne	lr, pc
+	adrne	lr, BSYM(1f)
 	movne	pc, r5
-	get_thread_info tsk
+1:	get_thread_info tsk
 	b	ret_slow_syscall
 ENDPROC(ret_from_fork)
 

arch/arm/kernel/irq.c

@@ -34,6 +34,7 @@
 #include <linux/list.h>
 #include <linux/kallsyms.h>
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
@@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 	/* Order is clear bits in "clr" then set bits in "set" */
 	irq_modify_status(irq, clr, set & ~clr);
 }
+EXPORT_SYMBOL_GPL(set_irq_flags);
 
 void __init init_IRQ(void)
 {

arch/arm/kernel/kprobes-test-arm.c

@@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
 	TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
 	TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+#endif
 
+#if __LINUX_ARM_ARCH__ >= 7
 	TEST_RRR(  "mls		r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(  "mlshi	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(   "mls		lr, r",1, VAL2,", r",2, VAL3,", r13")
@@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED(".word	0xe1700090") /* Unallocated space */
 #if __LINUX_ARM_ARCH__ >= 6
 	TEST_UNSUPPORTED("ldrex	r2, [sp]")
+#endif
+#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K)
 	TEST_UNSUPPORTED("strexd	r0, r2, r3, [sp]")
 	TEST_UNSUPPORTED("ldrexd	r2, r3, [sp]")
 	TEST_UNSUPPORTED("strexb	r0, r2, [sp]")

arch/arm/kernel/machine_kexec.c

@@ -45,10 +45,9 @@ int machine_kexec_prepare(struct kimage *image)
 	for (i = 0; i < image->nr_segments; i++) {
 		current_segment = &image->segment[i];
 
-		err = memblock_is_region_memory(current_segment->mem,
-						current_segment->memsz);
-		if (err)
-			return - EINVAL;
+		if (!memblock_is_region_memory(current_segment->mem,
+					       current_segment->memsz))
+			return -EINVAL;
 
 		err = get_user(header, (__be32*)current_segment->buf);
 		if (err)

arch/arm/kernel/perf_event.c

@@ -96,6 +96,10 @@ armpmu_event_set_period(struct perf_event *event,
 	s64 period = hwc->sample_period;
 	int ret = 0;
 
+	/* The period may have been changed by PERF_EVENT_IOC_PERIOD */
+	if (unlikely(period != hwc->last_period))
+		left = period - (hwc->last_period - left);
+
 	if (unlikely(left <= -period)) {
 		left = period;
 		local64_set(&hwc->period_left, left);

arch/arm/kernel/smp.c

@@ -294,18 +294,24 @@ static void percpu_timer_setup(void);
 asmlinkage void __cpuinit secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu;
+
+	/*
+	 * The identity mapping is uncached (strongly ordered), so
+	 * switch away from it before attempting any exclusive accesses.
+	 */
+	cpu_switch_mm(mm->pgd, mm);
+	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	/*
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
 	 */
+	cpu = smp_processor_id();
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
 	cpumask_set_cpu(cpu, mm_cpumask(mm));
-	cpu_switch_mm(mm->pgd, mm);
-	enter_lazy_tlb(mm, current);
-	local_flush_tlb_all();
 
 	printk("CPU%u: Booted secondary processor\n", cpu);
 

arch/arm/kernel/smp_twd.c

@@ -42,10 +42,10 @@ static void twd_set_mode(enum clock_event_mode mode,
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* timer load already set up */
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
-		__raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
+		__raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+			twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* period set, and timer enabled in 'next_event' hook */

arch/arm/lib/delay.c

@@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val)
 	*timer_val = delay_timer->read_current_timer();
 	return 0;
 }
+EXPORT_SYMBOL_GPL(read_current_timer);
 
 static void __timer_delay(unsigned long cycles)
 {

arch/arm/mach-dove/common.c

@@ -32,6 +32,7 @@
 #include <linux/irq.h>
 #include <plat/time.h>
 #include <linux/platform_data/usb-ehci-orion.h>
+#include <plat/irq.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
 #include "common.h"
@@ -109,8 +110,8 @@ static void __init dove_clk_init(void)
 
 	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
 	orion_clkdev_add(NULL, "orion-ehci.1", usb1);
-	orion_clkdev_add(NULL, "mv643xx_eth.0", ge);
-	orion_clkdev_add("0", "sata_mv.0", sata);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0", ge);
+	orion_clkdev_add(NULL, "sata_mv.0", sata);
 	orion_clkdev_add("0", "pcie", pex0);
 	orion_clkdev_add("1", "pcie", pex1);
 	orion_clkdev_add(NULL, "sdhci-dove.0", sdio0);
@@ -399,7 +400,7 @@ static void __init dove_dt_init(void)
 		(dove_tclk + 499999) / 1000000);
 
 #ifdef CONFIG_CACHE_TAUROS2
-	tauros2_init();
+	tauros2_init(0);
 #endif
 	dove_setup_cpu_mbus();
 
@@ -415,7 +416,6 @@ static void __init dove_dt_init(void)
 	dove_ehci0_init();
 	dove_ehci1_init();
 	dove_pcie_init(1, 1);
-	dove_crypto_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     dove_auxdata_lookup, NULL);

arch/arm/mach-dove/pcie.c

@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/clk.h>
 #include <video/vga.h>
 #include <asm/mach/pci.h>
 #include <asm/mach/arch.h>
@@ -188,6 +189,10 @@ static void __init add_pcie_port(int index, void __iomem *base)
 
 	if (orion_pcie_link_up(base)) {
 		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+		struct clk *clk = clk_get_sys("pcie", (index ? "1" : "0"));
+
+		if (!IS_ERR(clk))
+			clk_prepare_enable(clk);
 
 		printk(KERN_INFO "link up\n");
 

arch/arm/mach-kirkwood/board-dt.c

@@ -51,9 +51,7 @@ static void __init kirkwood_dt_init(void)
 
 	kirkwood_setup_cpu_mbus();
 
-#ifdef CONFIG_CACHE_FEROCEON_L2
 	kirkwood_l2_init();
-#endif
 
 	/* Setup root of clk tree */
 	kirkwood_clk_init();

arch/arm/mach-kirkwood/common.c

@@ -633,6 +633,7 @@ char * __init kirkwood_id(void)
 
 void __init kirkwood_l2_init(void)
 {
+#ifdef CONFIG_CACHE_FEROCEON_L2
 #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
 	writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
 	feroceon_l2_init(1);
@@ -640,6 +641,7 @@ void __init kirkwood_l2_init(void)
 	writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
 	feroceon_l2_init(0);
 #endif
+#endif
 }
 
 void __init kirkwood_init(void)
@@ -657,9 +659,7 @@ void __init kirkwood_init(void)
 
 	kirkwood_setup_cpu_mbus();
 
-#ifdef CONFIG_CACHE_FEROCEON_L2
 	kirkwood_l2_init();
-#endif
 
 	/* Setup root of clk tree */
 	kirkwood_clk_init();

arch/arm/mach-omap1/board-ams-delta.c

@@ -444,16 +444,28 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
 	.lclk_khz_max	= 1334,		/* results in 5fps CIF, 10fps QCIF */
 };
 
+static struct platform_device ams_delta_audio_device = {
+	.name   = "ams-delta-audio",
+	.id     = -1,
+};
+
+static struct platform_device cx20442_codec_device = {
+	.name   = "cx20442-codec",
+	.id     = -1,
+};
+
 static struct platform_device *ams_delta_devices[] __initdata = {
 	&latch1_gpio_device,
 	&latch2_gpio_device,
 	&ams_delta_kp_device,
 	&ams_delta_camera_device,
+	&ams_delta_audio_device,
 };
 
 static struct platform_device *late_devices[] __initdata = {
 	&ams_delta_nand_device,
 	&ams_delta_lcd_device,
+	&cx20442_codec_device,
 };
 
 static void __init ams_delta_init(void)

arch/arm/mach-omap2/clock44xx_data.c

@@ -3294,7 +3294,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck,	CK_443X),
 	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck,	CK_443X),
 	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck,	CK_443X),
-	CLK(NULL,	"gpmc_ck",			&dummy_ck,	CK_443X),
+	CLK("omap-gpmc",	"fck",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.1",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.2",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.3",	"ick",				&dummy_ck,	CK_443X),

arch/arm/mach-omap2/clockdomain.c

@@ -925,15 +925,18 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
 	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
 		return -EINVAL;
 
+	spin_lock_irqsave(&clkdm->lock, flags);
+
 	/*
 	 * For arch's with no autodeps, clkcm_clk_enable
 	 * should be called for every clock instance or hwmod that is
 	 * enabled, so the clkdm can be force woken up.
 	 */
-	if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps)
+	if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) {
+		spin_unlock_irqrestore(&clkdm->lock, flags);
 		return 0;
+	}
 
-	spin_lock_irqsave(&clkdm->lock, flags);
 	arch_clkdm->clkdm_clk_enable(clkdm);
 	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
@@ -950,15 +953,19 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
 	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
 		return -EINVAL;
 
+	spin_lock_irqsave(&clkdm->lock, flags);
+
 	if (atomic_read(&clkdm->usecount) == 0) {
+		spin_unlock_irqrestore(&clkdm->lock, flags);
 		WARN_ON(1); /* underflow */
 		return -ERANGE;
 	}
 
-	if (atomic_dec_return(&clkdm->usecount) > 0)
+	if (atomic_dec_return(&clkdm->usecount) > 0) {
+		spin_unlock_irqrestore(&clkdm->lock, flags);
 		return 0;
+	}
 
-	spin_lock_irqsave(&clkdm->lock, flags);
 	arch_clkdm->clkdm_clk_disable(clkdm);
 	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);

arch/arm/mach-omap2/devices.c

@@ -341,7 +341,7 @@ static void __init omap_init_dmic(void)
 
 	oh = omap_hwmod_lookup("dmic");
 	if (!oh) {
-		printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+		pr_err("Could not look up dmic hw_mod\n");
 		return;
 	}
 

arch/arm/mach-omap2/gpmc.c

@@ -868,9 +868,9 @@ static void __devexit gpmc_mem_exit(void)
 
 }
 
-static void __devinit gpmc_mem_init(void)
+static int __devinit gpmc_mem_init(void)
 {
-	int cs;
+	int cs, rc;
 	unsigned long boot_rom_space = 0;
 
 	/* never allocate the first page, to facilitate bug detection;
@@ -890,13 +890,21 @@ static void __devinit gpmc_mem_init(void)
 		if (!gpmc_cs_mem_enabled(cs))
 			continue;
 		gpmc_cs_get_memconf(cs, &base, &size);
-		if (gpmc_cs_insert_mem(cs, base, size) < 0)
-			BUG();
+		rc = gpmc_cs_insert_mem(cs, base, size);
+		if (IS_ERR_VALUE(rc)) {
+			while (--cs >= 0)
+				if (gpmc_cs_mem_enabled(cs))
+					gpmc_cs_delete_mem(cs);
+			return rc;
+		}
 	}
+
+	return 0;
 }
 
 static __devinit int gpmc_probe(struct platform_device *pdev)
 {
+	int rc;
 	u32 l;
 	struct resource *res;
 
@@ -936,7 +944,13 @@ static __devinit int gpmc_probe(struct platform_device *pdev)
 	dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
 		 GPMC_REVISION_MINOR(l));
 
-	gpmc_mem_init();
+	rc = gpmc_mem_init();
+	if (IS_ERR_VALUE(rc)) {
+		clk_disable_unprepare(gpmc_l3_clk);
+		clk_put(gpmc_l3_clk);
+		dev_err(gpmc_dev, "failed to reserve memory\n");
+		return rc;
+	}
 
 	if (IS_ERR_VALUE(gpmc_setup_irq()))
 		dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");

arch/arm/mach-omap2/timer.c

@@ -467,7 +467,7 @@ OMAP_SYS_TIMER(3_am33xx)
 #ifdef CONFIG_ARCH_OMAP4
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
+			      OMAP44XX_LOCAL_TWD_BASE, 29);
 #endif
 
 static void __init omap4_timer_init(void)

arch/arm/mach-prima2/include/mach/gpio.h

@@ -1,13 +0,0 @@
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-/* Pull up/down values */
-enum sirfsoc_gpio_pull {
-	SIRFSOC_GPIO_PULL_NONE,
-	SIRFSOC_GPIO_PULL_UP,
-	SIRFSOC_GPIO_PULL_DOWN,
-};
-
-void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode);
-
-#endif

arch/arm/mach-s3c24xx/clock-s3c2440.c

@@ -163,7 +163,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
 };
 
-static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
+static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
 {
 	struct clk *clock_upll;
 	struct clk *clock_h;

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -1196,7 +1196,7 @@ static void __init eva_init(void)
 
 #ifdef CONFIG_CACHE_L2X0
 	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
-	l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff);
+	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
 #endif
 
 	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));

arch/arm/mach-shmobile/clock-r8a7779.c

@@ -24,17 +24,17 @@
 #include <linux/clkdev.h>
 #include <mach/common.h>
 
-#define FRQMR   0xffc80014
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-#define MSTPCR3 0xffc8003c
-#define MSTPSR1 0xffc80044
-#define MSTPSR4 0xffc80048
-#define MSTPSR6 0xffc8004c
-#define MSTPCR4 0xffc80050
-#define MSTPCR5 0xffc80054
-#define MSTPCR6 0xffc80058
-#define MSTPCR7 0xffc80040
+#define FRQMR		IOMEM(0xffc80014)
+#define MSTPCR0		IOMEM(0xffc80030)
+#define MSTPCR1		IOMEM(0xffc80034)
+#define MSTPCR3		IOMEM(0xffc8003c)
+#define MSTPSR1		IOMEM(0xffc80044)
+#define MSTPSR4		IOMEM(0xffc80048)
+#define MSTPSR6		IOMEM(0xffc8004c)
+#define MSTPCR4		IOMEM(0xffc80050)
+#define MSTPCR5		IOMEM(0xffc80054)
+#define MSTPCR6		IOMEM(0xffc80058)
+#define MSTPCR7		IOMEM(0xffc80040)
 
 /* ioremap() through clock mapping mandatory to avoid
  * collision with ARM coherent DMA virtual memory range.

arch/arm/mach-tegra/board-dt-tegra20.c

@@ -182,7 +182,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
 	.init_early	= tegra20_init_early,
 	.init_irq	= tegra_dt_init_irq,
 	.handle_irq	= gic_handle_irq,
-	.timer		= &tegra_timer,
+	.timer		= &tegra_sys_timer,
 	.init_machine	= tegra_dt_init,
 	.init_late	= tegra_dt_init_late,
 	.restart	= tegra_assert_system_reset,

arch/arm/mach-tegra/board-dt-tegra30.c

@@ -89,7 +89,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
 	.init_early	= tegra30_init_early,
 	.init_irq	= tegra_dt_init_irq,
 	.handle_irq	= gic_handle_irq,
-	.timer		= &tegra_timer,
+	.timer		= &tegra_sys_timer,
 	.init_machine	= tegra30_dt_init,
 	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,

arch/arm/mach-tegra/board.h

@@ -55,5 +55,5 @@ static inline int harmony_pcie_init(void) { return 0; }
 
 void __init tegra_paz00_wifikill_init(void);
 
-extern struct sys_timer tegra_timer;
+extern struct sys_timer tegra_sys_timer;
 #endif

arch/arm/mach-tegra/tegra20_clocks_data.c

@@ -953,6 +953,7 @@ PERIPH_CLK(pcie_xclk,	NULL,		  "pcie_xclk",  74,     0,	26000000,  mux_clk_m,
 static struct clk *tegra_list_clks[] = {
 	&tegra_apbdma,
 	&tegra_rtc,
+	&tegra_timer,
 	&tegra_i2s1,
 	&tegra_i2s2,
 	&tegra_spdif_out,

arch/arm/mach-tegra/tegra30_clocks.c

@@ -1199,7 +1199,7 @@ static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct clk_tegra *c = to_clk_tegra(hw);
 	unsigned long input_rate = *prate;
-	unsigned long output_rate = *prate;
+	u64 output_rate = *prate;
 	const struct clk_pll_freq_table *sel;
 	struct clk_pll_freq_table cfg;
 	int mul;

arch/arm/mach-tegra/tegra30_clocks_data.c

@@ -1143,6 +1143,7 @@ struct clk *tegra_list_clks[] = {
 	&tegra_apbdma,
 	&tegra_rtc,
 	&tegra_kbc,
+	&tegra_timer,
 	&tegra_kfuse,
 	&tegra_fuse,
 	&tegra_fuse_burn,

arch/arm/mach-tegra/timer.c

@@ -245,7 +245,7 @@ static void __init tegra_init_timer(void)
 	register_persistent_clock(NULL, tegra_read_persistent_clock);
 }
 
-struct sys_timer tegra_timer = {
+struct sys_timer tegra_sys_timer = {
 	.init = tegra_init_timer,
 };
 

arch/arm/mm/alignment.c

@@ -856,8 +856,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		if (thumb2_32b) {
 			offset.un = 0;
 			handler = do_alignment_t32_to_handler(&instr, regs, &offset);
-		} else
+		} else {
+			offset.un = 0;
 			handler = do_alignment_ldmstm;
+		}
 		break;
 
 	default:

arch/arm/mm/dma-mapping.c

@@ -610,7 +610,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 			 gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller)
 {
 	u64 mask = get_coherent_dma_mask(dev);
-	struct page *page;
+	struct page *page = NULL;
 	void *addr;
 
 #ifdef CONFIG_DMA_API_DEBUG

arch/arm/mm/vmregion.h

@@ -17,7 +17,6 @@ struct arm_vmregion {
 	struct list_head	vm_list;
 	unsigned long		vm_start;
 	unsigned long		vm_end;
-	void			*priv;
 	int			vm_active;
 	const void		*caller;
 };

arch/arm/plat-omap/debug-devices.c

@@ -16,6 +16,7 @@
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
+#include "../mach-omap2/debug-devices.h"
 
 /* Many OMAP development platforms reuse the same "debug board"; these
  * platforms include H2, H3, H4, and Perseus2.

arch/arm/plat-omap/include/plat/omap-serial.h

@@ -40,10 +40,10 @@
 #define OMAP_UART_WER_MOD_WKUP	0X7F
 
 /* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX		0x8
+#define OMAP_UART_SW_TX		0x04
 
 /* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX		0x2
+#define OMAP_UART_SW_RX		0x04
 
 #define OMAP_UART_SYSC_RESET	0X07
 #define OMAP_UART_TCR_TRIG	0X0F

arch/arm/tools/Makefile

@@ -5,6 +5,6 @@
 #
 
 include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
-	@echo '  Generating $@'
+	$(kecho) '  Generating $@'
 	@mkdir -p $(dir $@)
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }

arch/arm/xen/grant-table.c

@@ -33,7 +33,7 @@
 #include <xen/page.h>
 #include <xen/grant_table.h>
 
-int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes,
 			   unsigned long max_nr_gframes,
 			   void **__shared)
 {

arch/arm64/Kconfig

@@ -22,6 +22,7 @@ config ARM64
 	select HAVE_PERF_EVENTS
 	select HAVE_SPARSE_IRQ
 	select IRQ_DOMAIN
+	select MODULES_USE_ELF_RELA
 	select NO_BOOTMEM
 	select OF
 	select OF_EARLY_FLATTREE

arch/arm64/include/asm/Kbuild

@@ -18,7 +18,6 @@ generic-y += ipcbuf.h
 generic-y += irq_regs.h
 generic-y += kdebug.h
 generic-y += kmap_types.h
-generic-y += linkage.h
 generic-y += local.h
 generic-y += local64.h
 generic-y += mman.h

arch/arm64/include/asm/linkage.h

@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN		.align 4
+#define __ALIGN_STR	".align 4"
+
+#endif

arch/arm64/include/asm/processor.h

@@ -92,30 +92,20 @@ static inline void start_thread_common(struct pt_regs *regs, unsigned long pc)
 static inline void start_thread(struct pt_regs *regs, unsigned long pc,
 				unsigned long sp)
 {
-	unsigned long *stack = (unsigned long *)sp;
-
 	start_thread_common(regs, pc);
 	regs->pstate = PSR_MODE_EL0t;
 	regs->sp = sp;
-	regs->regs[2] = stack[2];	/* x2 (envp) */
-	regs->regs[1] = stack[1];	/* x1 (argv) */
-	regs->regs[0] = stack[0];	/* x0 (argc) */
 }
 
 #ifdef CONFIG_COMPAT
 static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
 				       unsigned long sp)
 {
-	unsigned int *stack = (unsigned int *)sp;
-
 	start_thread_common(regs, pc);
 	regs->pstate = COMPAT_PSR_MODE_USR;
 	if (pc & 1)
 		regs->pstate |= COMPAT_PSR_T_BIT;
 	regs->compat_sp = sp;
-	regs->regs[2] = stack[2];	/* x2 (envp) */
-	regs->regs[1] = stack[1];	/* x1 (argv) */
-	regs->regs[0] = stack[0];	/* x0 (argc) */
 }
 #endif
 

arch/arm64/include/uapi/asm/ptrace.h

@@ -79,13 +79,14 @@ struct user_fpsimd_state {
 
 struct user_hwdebug_state {
 	__u32		dbg_info;
+	__u32		pad;
 	struct {
 		__u64	addr;
 		__u32	ctrl;
+		__u32	pad;
 	}		dbg_regs[16];
 };
 
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _UAPI__ASM_PTRACE_H */

arch/arm64/kernel/ptrace.c

@@ -234,28 +234,33 @@ static int ptrace_hbp_fill_attr_ctrl(unsigned int note_type,
 				     struct arch_hw_breakpoint_ctrl ctrl,
 				     struct perf_event_attr *attr)
 {
-	int err, len, type;
+	int err, len, type, disabled = !ctrl.enabled;
 
-	err = arch_bp_generic_fields(ctrl, &len, &type);
-	if (err)
-		return err;
-
-	switch (note_type) {
-	case NT_ARM_HW_BREAK:
-		if ((type & HW_BREAKPOINT_X) != type)
-			return -EINVAL;
-		break;
-	case NT_ARM_HW_WATCH:
-		if ((type & HW_BREAKPOINT_RW) != type)
+	if (disabled) {
+		len = 0;
+		type = HW_BREAKPOINT_EMPTY;
+	} else {
+		err = arch_bp_generic_fields(ctrl, &len, &type);
+		if (err)
+			return err;
+
+		switch (note_type) {
+		case NT_ARM_HW_BREAK:
+			if ((type & HW_BREAKPOINT_X) != type)
+				return -EINVAL;
+			break;
+		case NT_ARM_HW_WATCH:
+			if ((type & HW_BREAKPOINT_RW) != type)
+				return -EINVAL;
+			break;
+		default:
 			return -EINVAL;
-		break;
-	default:
-		return -EINVAL;
+		}
 	}
 
 	attr->bp_len	= len;
 	attr->bp_type	= type;
-	attr->disabled	= !ctrl.enabled;
+	attr->disabled	= disabled;
 
 	return 0;
 }
@@ -372,7 +377,7 @@ static int ptrace_hbp_set_addr(unsigned int note_type,
 
 #define PTRACE_HBP_ADDR_SZ	sizeof(u64)
 #define PTRACE_HBP_CTRL_SZ	sizeof(u32)
-#define PTRACE_HBP_REG_OFF	sizeof(u32)
+#define PTRACE_HBP_PAD_SZ	sizeof(u32)
 
 static int hw_break_get(struct task_struct *target,
 			const struct user_regset *regset,
@@ -380,7 +385,7 @@ static int hw_break_get(struct task_struct *target,
 			void *kbuf, void __user *ubuf)
 {
 	unsigned int note_type = regset->core_note_type;
-	int ret, idx = 0, offset = PTRACE_HBP_REG_OFF, limit;
+	int ret, idx = 0, offset, limit;
 	u32 info, ctrl;
 	u64 addr;
 
@@ -389,11 +394,20 @@ static int hw_break_get(struct task_struct *target,
 	if (ret)
 		return ret;
 
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &info, 0, 4);
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &info, 0,
+				  sizeof(info));
+	if (ret)
+		return ret;
+
+	/* Pad */
+	offset = offsetof(struct user_hwdebug_state, pad);
+	ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, offset,
+				       offset + PTRACE_HBP_PAD_SZ);
 	if (ret)
 		return ret;
 
 	/* (address, ctrl) registers */
+	offset = offsetof(struct user_hwdebug_state, dbg_regs);
 	limit = regset->n * regset->size;
 	while (count && offset < limit) {
 		ret = ptrace_hbp_get_addr(note_type, target, idx, &addr);
@@ -413,6 +427,13 @@ static int hw_break_get(struct task_struct *target,
 		if (ret)
 			return ret;
 		offset += PTRACE_HBP_CTRL_SZ;
+
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					       offset,
+					       offset + PTRACE_HBP_PAD_SZ);
+		if (ret)
+			return ret;
+		offset += PTRACE_HBP_PAD_SZ;
 		idx++;
 	}
 
@@ -425,12 +446,13 @@ static int hw_break_set(struct task_struct *target,
 			const void *kbuf, const void __user *ubuf)
 {
 	unsigned int note_type = regset->core_note_type;
-	int ret, idx = 0, offset = PTRACE_HBP_REG_OFF, limit;
+	int ret, idx = 0, offset, limit;
 	u32 ctrl;
 	u64 addr;
 
-	/* Resource info */
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, 4);
+	/* Resource info and pad */
+	offset = offsetof(struct user_hwdebug_state, dbg_regs);
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, offset);
 	if (ret)
 		return ret;
 
@@ -454,6 +476,13 @@ static int hw_break_set(struct task_struct *target,
 		if (ret)
 			return ret;
 		offset += PTRACE_HBP_CTRL_SZ;
+
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						offset,
+						offset + PTRACE_HBP_PAD_SZ);
+		if (ret)
+			return ret;
+		offset += PTRACE_HBP_PAD_SZ;
 		idx++;
 	}
 

arch/arm64/kernel/setup.c

@@ -170,7 +170,19 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
 
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
+	base &= PAGE_MASK;
 	size &= PAGE_MASK;
+	if (base + size < PHYS_OFFSET) {
+		pr_warning("Ignoring memory block 0x%llx - 0x%llx\n",
+			   base, base + size);
+		return;
+	}
+	if (base < PHYS_OFFSET) {
+		pr_warning("Ignoring memory range 0x%llx - 0x%llx\n",
+			   base, PHYS_OFFSET);
+		size -= PHYS_OFFSET - base;
+		base = PHYS_OFFSET;
+	}
 	memblock_add(base, size);
 }
 

arch/arm64/kernel/smp.c

@@ -46,7 +46,6 @@
 #include <asm/sections.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
-#include <asm/mmu_context.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure

arch/arm64/kernel/vdso.c

@@ -28,6 +28,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/slab.h>
+#include <linux/timekeeper_internal.h>
 #include <linux/vmalloc.h>
 
 #include <asm/cacheflush.h>
@@ -222,11 +223,10 @@ struct vm_area_struct *get_gate_vma(struct mm_struct *mm)
 /*
  * Update the vDSO data page to keep in sync with kernel timekeeping.
  */
-void update_vsyscall(struct timespec *ts, struct timespec *wtm,
-		     struct clocksource *clock, u32 mult)
+void update_vsyscall(struct timekeeper *tk)
 {
 	struct timespec xtime_coarse;
-	u32 use_syscall = strcmp(clock->name, "arch_sys_counter");
+	u32 use_syscall = strcmp(tk->clock->name, "arch_sys_counter");
 
 	++vdso_data->tb_seq_count;
 	smp_wmb();
@@ -237,13 +237,13 @@ void update_vsyscall(struct timespec *ts, struct timespec *wtm,
 	vdso_data->xtime_coarse_nsec		= xtime_coarse.tv_nsec;
 
 	if (!use_syscall) {
-		vdso_data->cs_cycle_last	= clock->cycle_last;
-		vdso_data->xtime_clock_sec	= ts->tv_sec;
-		vdso_data->xtime_clock_nsec	= ts->tv_nsec;
-		vdso_data->cs_mult		= mult;
-		vdso_data->cs_shift		= clock->shift;
-		vdso_data->wtm_clock_sec	= wtm->tv_sec;
-		vdso_data->wtm_clock_nsec	= wtm->tv_nsec;
+		vdso_data->cs_cycle_last	= tk->clock->cycle_last;
+		vdso_data->xtime_clock_sec	= tk->xtime_sec;
+		vdso_data->xtime_clock_nsec	= tk->xtime_nsec >> tk->shift;
+		vdso_data->cs_mult		= tk->mult;
+		vdso_data->cs_shift		= tk->shift;
+		vdso_data->wtm_clock_sec	= tk->wall_to_monotonic.tv_sec;
+		vdso_data->wtm_clock_nsec	= tk->wall_to_monotonic.tv_nsec;
 	}
 
 	smp_wmb();

arch/frv/kernel/entry.S

@@ -867,8 +867,8 @@ ret_from_fork:
 ret_from_kernel_thread:
 	lddi.p		@(gr28,#REG_GR(8)),gr20
 	call		schedule_tail
-	or.p		gr20,gr20,gr8
-	calll		@(gr21,gr0)
+	calll.p		@(gr21,gr0)
+	or		gr20,gr20,gr8
 	bra		sys_exit
 
 	.globl		ret_from_kernel_execve

arch/frv/kernel/process.c

@@ -194,7 +194,7 @@ int copy_thread(unsigned long clone_flags,
 		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->gr9 = usp; /* function */
 		childregs->gr8 = arg;
-		chilregs->psr = PSR_S;
+		childregs->psr = PSR_S;
 		p->thread.pc = (unsigned long) ret_from_kernel_thread;
 		save_user_regs(p->thread.user);
 		return 0;

arch/frv/kernel/setup.c

@@ -112,9 +112,11 @@ char __initdata redboot_command_line[COMMAND_LINE_SIZE];
 #ifdef CONFIG_PM
 #define __pminit
 #define __pminitdata
+#define __pminitconst
 #else
 #define __pminit __init
 #define __pminitdata __initdata
+#define __pminitconst __initconst
 #endif
 
 struct clock_cmode {

arch/hexagon/include/asm/Kbuild

@@ -1,8 +1,5 @@
-include include/asm-generic/Kbuild.asm
 
-header-y += registers.h
 header-y += ucontext.h
-header-y += user.h
 
 generic-y += auxvec.h
 generic-y += bug.h

arch/hexagon/include/asm/atomic.h

@@ -1,7 +1,7 @@
 /*
  * Atomic operations for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  *
  * This program is free software; you can redistribute it and/or modify

arch/hexagon/include/asm/barrier.h

@@ -1,7 +1,7 @@
 /*
  * Memory barrier definitions for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/bitops.h

@@ -1,7 +1,7 @@
 /*
  * Bit operations for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  *
  * This program is free software; you can redistribute it and/or modify

arch/hexagon/include/asm/cache.h

@@ -1,7 +1,7 @@
 /*
  * Cache definitions for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/cacheflush.h

@@ -1,7 +1,7 @@
 /*
  * Cache flush operations for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/checksum.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/cmpxchg.h

@@ -1,7 +1,7 @@
 /*
  * xchg/cmpxchg operations for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  *
  * This program is free software; you can redistribute it and/or modify

arch/hexagon/include/asm/delay.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/dma-mapping.h

@@ -1,7 +1,7 @@
 /*
  * DMA operations for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/dma.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/elf.h

@@ -1,7 +1,7 @@
 /*
  * ELF definitions for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/exec.h

@@ -1,7 +1,7 @@
 /*
  * Process execution related definitions for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/fixmap.h

@@ -1,7 +1,7 @@
 /*
  * Fixmap support for Hexagon - enough to support highmem features
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/hexagon_vm.h

@@ -1,7 +1,7 @@
 /*
  * Declarations for to Hexagon Virtal Machine.
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/intrinsics.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/io.h

@@ -1,7 +1,7 @@
 /*
  * IO definitions for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/irq.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/irqflags.h

@@ -1,7 +1,7 @@
 /*
  * IRQ support for the Hexagon architecture
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and

arch/hexagon/include/asm/kgdb.h

@@ -1,7 +1,7 @@
 /*
  * arch/hexagon/include/asm/kgdb.h - Hexagon KGDB Support
  *
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and