skge: remove __dev* attributes

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/ethernet/marvell/skge.c

@@ -3860,7 +3860,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 	return dev;
 }
 
-static void __devinit skge_show_addr(struct net_device *dev)
+static void skge_show_addr(struct net_device *dev)
 {
 	const struct skge_port *skge = netdev_priv(dev);
 
@@ -3869,7 +3869,7 @@ static void __devinit skge_show_addr(struct net_device *dev)
 
 static int only_32bit_dma;
 
-static int __devinit skge_probe(struct pci_dev *pdev,
+static int skge_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
 	struct net_device *dev, *dev1;
@@ -4012,7 +4012,7 @@ err_out:
 	return err;
 }
 
-static void __devexit skge_remove(struct pci_dev *pdev)
+static void skge_remove(struct pci_dev *pdev)
 {
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
 	struct net_device *dev0, *dev1;
@@ -4142,7 +4142,7 @@ static struct pci_driver skge_driver = {
 	.name =         DRV_NAME,
 	.id_table =     skge_id_table,
 	.probe =        skge_probe,
-	.remove =       __devexit_p(skge_remove),
+	.remove =       skge_remove,
 	.shutdown =	skge_shutdown,
 	.driver.pm =	SKGE_PM_OPS,
 };

drivers/net/ethernet/marvell/sky2.c

@@ -3140,7 +3140,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 }
 
 
-static int __devinit sky2_init(struct sky2_hw *hw)
+static int sky2_init(struct sky2_hw *hw)
 {
 	u8 t8;
 
@@ -4741,7 +4741,7 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
 };
 
 /* Initialize network device */
-static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
+static struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 						     unsigned port,
 						     int highmem, int wol)
 {
@@ -4807,7 +4807,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	return dev;
 }
 
-static void __devinit sky2_show_addr(struct net_device *dev)
+static void sky2_show_addr(struct net_device *dev)
 {
 	const struct sky2_port *sky2 = netdev_priv(dev);
 
@@ -4815,7 +4815,7 @@ static void __devinit sky2_show_addr(struct net_device *dev)
 }
 
 /* Handle software interrupt used during MSI test */
-static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
+static irqreturn_t sky2_test_intr(int irq, void *dev_id)
 {
 	struct sky2_hw *hw = dev_id;
 	u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
@@ -4834,7 +4834,7 @@ static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
 }
 
 /* Test interrupt path by forcing a a software IRQ */
-static int __devinit sky2_test_msi(struct sky2_hw *hw)
+static int sky2_test_msi(struct sky2_hw *hw)
 {
 	struct pci_dev *pdev = hw->pdev;
 	int err;
@@ -4896,7 +4896,7 @@ static const char *sky2_name(u8 chipid, char *buf, int sz)
 	return buf;
 }
 
-static int __devinit sky2_probe(struct pci_dev *pdev,
+static int sky2_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
 	struct net_device *dev, *dev1;
@@ -5086,7 +5086,7 @@ err_out:
 	return err;
 }
 
-static void __devexit sky2_remove(struct pci_dev *pdev)
+static void sky2_remove(struct pci_dev *pdev)
 {
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
 	int i;
@@ -5207,7 +5207,7 @@ static struct pci_driver sky2_driver = {
 	.name = DRV_NAME,
 	.id_table = sky2_id_table,
 	.probe = sky2_probe,
-	.remove = __devexit_p(sky2_remove),
+	.remove = sky2_remove,
 	.shutdown = sky2_shutdown,
 	.driver.pm = SKY2_PM_OPS,
 };