HID: Merge branch 'master' into for-3.10/hid-driver-transport-cleanups

Sync with Linus' tree. This is necessary to resolve build conflict
caused by dcd9006b1b053c7b ("HID: logitech-dj: do not directly call
hid_output_raw_report() during probe") which issues direct call to
usbhid_submit_report(), but that is gone in this branch and
hid_hw_request() has to be used instead.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/00-INDEX

@@ -299,6 +299,8 @@ memory-hotplug.txt
 	- Hotpluggable memory support, how to use and current status.
 memory.txt
 	- info on typical Linux memory problems.
+metag/
+	- directory with info about Linux on Meta architecture.
 mips/
 	- directory with info about Linux on MIPS architecture.
 misc-devices/

Documentation/ABI/testing/sysfs-bus-fcoe

@@ -1,14 +1,53 @@
-What:		/sys/bus/fcoe/ctlr_X
+What:		/sys/bus/fcoe/
+Date:		August 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	The FCoE bus. Attributes in this directory are control interfaces.
+Attributes:
+
+	ctlr_create: 'FCoE Controller' instance creation interface. Writing an
+		     <ifname> to this file will allocate and populate sysfs with a
+		     fcoe_ctlr_device (ctlr_X). The user can then configure any
+		     per-port settings and finally write to the fcoe_ctlr_device's
+		     'start' attribute to begin the kernel's discovery and login
+		     process.
+
+	ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
+		       fcoe_ctlr_device's sysfs name to this file will log the
+		       fcoe_ctlr_device out of the fabric or otherwise connected
+		       FCoE devices. It will also free all kernel memory allocated
+		       for this fcoe_ctlr_device and any structures associated
+		       with it, this includes the scsi_host.
+
+What:		/sys/bus/fcoe/devices/ctlr_X
 Date:		March 2012
 KernelVersion:	TBD
 Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
-Description:	'FCoE Controller' instances on the fcoe bus
+Description:	'FCoE Controller' instances on the fcoe bus.
+		The FCoE Controller now has a three stage creation process.
+		1) Write interface name to ctlr_create 2) Configure the FCoE
+		Controller (ctlr_X) 3) Enable the FCoE Controller to begin
+		discovery and login. The FCoE Controller is destroyed by
+		writing it's name, i.e. ctlr_X to the ctlr_delete file.
+
 Attributes:
 
 	fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
 			  this value will change the dev_loss_tmo for all
 			  FCFs discovered by this controller.
 
+	mode:		  Display or change the FCoE Controller's mode. Possible
+			  modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
+			  is started in 'Fabric' mode then FIP FCF discovery is
+			  initiated and ultimately a fabric login is attempted.
+			  If a FCoE Controller is started in 'VN2VN' mode then
+			  FIP VN2VN discovery and login is performed. A FCoE
+			  Controller only supports one mode at a time.
+
+	enabled:	  Whether an FCoE controller is enabled or disabled.
+			  0 if disabled, 1 if enabled. Writing either 0 or 1
+			  to this file will enable or disable the FCoE controller.
+
 	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
 
 	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
@@ -26,7 +65,7 @@ Attributes:
 
 Notes: ctlr_X (global increment starting at 0)
 
-What:		/sys/bus/fcoe/fcf_X
+What:		/sys/bus/fcoe/devices/fcf_X
 Date:		March 2012
 KernelVersion:	TBD
 Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org

Documentation/ABI/testing/sysfs-kernel-mm-ksm

@@ -0,0 +1,52 @@
+What:		/sys/kernel/mm/ksm
+Date:		September 2009
+KernelVersion:	2.6.32
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Interface for Kernel Samepage Merging (KSM)
+
+What:		/sys/kernel/mm/ksm/full_scans
+What:		/sys/kernel/mm/ksm/pages_shared
+What:		/sys/kernel/mm/ksm/pages_sharing
+What:		/sys/kernel/mm/ksm/pages_to_scan
+What:		/sys/kernel/mm/ksm/pages_unshared
+What:		/sys/kernel/mm/ksm/pages_volatile
+What:		/sys/kernel/mm/ksm/run
+What:		/sys/kernel/mm/ksm/sleep_millisecs
+Date:		September 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Kernel Samepage Merging daemon sysfs interface
+
+		full_scans: how many times all mergeable areas have been
+		scanned.
+
+		pages_shared: how many shared pages are being used.
+
+		pages_sharing: how many more sites are sharing them i.e. how
+		much saved.
+
+		pages_to_scan: how many present pages to scan before ksmd goes
+		to sleep.
+
+		pages_unshared: how many pages unique but repeatedly checked
+		for merging.
+
+		pages_volatile: how many pages changing too fast to be placed
+		in a tree.
+
+		run: write 0 to disable ksm, read 0 while ksm is disabled.
+			write 1 to run ksm, read 1 while ksm is running.
+			write 2 to disable ksm and unmerge all its pages.
+
+		sleep_millisecs: how many milliseconds ksm should sleep between
+		scans.
+
+		See Documentation/vm/ksm.txt for more information.
+
+What:		/sys/kernel/mm/ksm/merge_across_nodes
+Date:		January 2013
+KernelVersion:	3.9
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Control merging pages across different NUMA nodes.
+
+		When it is set to 0 only pages from the same node are merged,
+		otherwise pages from all nodes can be merged together (default).

Documentation/ABI/testing/sysfs-platform-msi-laptop

@@ -0,0 +1,83 @@
+What:		/sys/devices/platform/msi-laptop-pf/lcd_level
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Screen brightness: contains a single integer in the range 0..8.
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_brightness
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Enable automatic brightness control: contains either 0 or 1. If
+		set to 1 the hardware adjusts the screen brightness
+		automatically when the power cord is plugged/unplugged.
+
+What:		/sys/devices/platform/msi-laptop-pf/wlan
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		WLAN subsystem enabled: contains either 0 or 1.
+
+What:		/sys/devices/platform/msi-laptop-pf/bluetooth
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Bluetooth subsystem enabled: contains either 0 or 1. Please
+		note that this file is constantly 0 if no Bluetooth hardware is
+		available.
+
+What:		/sys/devices/platform/msi-laptop-pf/touchpad
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if touchpad is turned on.
+		Touchpad state can only be toggled by pressing Fn+F3.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if turbo mode is turned
+		on. In turbo mode power LED is orange and processor is
+		overclocked. Turbo mode is available only if charging. It is
+		only possible to toggle turbo mode state by pressing Fn+F10,
+		and there is a few seconds cooldown between subsequent toggles.
+		If user presses Fn+F10 too frequent, turbo mode state is not
+		changed.
+
+What:		/sys/devices/platform/msi-laptop-pf/eco_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if ECO mode is turned on.
+		In ECO mode power LED is green and userspace should do some
+		powersaving actions. ECO mode is available only on battery
+		power. ECO mode can only be toggled by pressing Fn+F10.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_cooldown
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains value in range 0..3:
+			* 0 -> Turbo mode is off
+			* 1 -> Turbo mode is on, cannot be turned off yet
+			* 2 -> Turbo mode is off, cannot be turned on yet
+			* 3 -> Turbo mode is on
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_fan
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if fan speed is controlled
+		automatically (1) or fan runs at maximal speed (0). Can be
+		toggled in software.
+

Documentation/DMA-API-HOWTO.txt

@@ -488,9 +488,10 @@ will invoke the generic mapping error check interface. Doing so will ensure
 that the mapping code will work correctly on all dma implementations without
 any dependency on the specifics of the underlying implementation. Using the
 returned address without checking for errors could result in failures ranging
-from panics to silent data corruption. Couple of example of incorrect ways to
-check for errors that make assumptions about the underlying dma implementation
-are as follows and these are applicable to dma_map_page() as well.
+from panics to silent data corruption. A couple of examples of incorrect ways
+to check for errors that make assumptions about the underlying dma
+implementation are as follows and these are applicable to dma_map_page() as
+well.
 
 Incorrect example 1:
 	dma_addr_t dma_handle;
@@ -751,7 +752,7 @@ Example 1:
 		dma_unmap_single(dma_handle1);
 	map_error_handling1:
 
-Example 2: (if buffers are allocated a loop, unmap all mapped buffers when
+Example 2: (if buffers are allocated in a loop, unmap all mapped buffers when
 	    mapping error is detected in the middle)
 
 	dma_addr_t dma_addr;

Documentation/DocBook/drm.tmpl

@@ -743,6 +743,10 @@ char *date;</synopsis>
           These two operations are mandatory for GEM drivers that support DRM
           PRIME.
         </para>
+        <sect4>
+          <title>DRM PRIME Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_prime.c PRIME Helpers
+        </sect4>
       </sect3>
       <sect3 id="drm-gem-objects-mapping">
         <title>GEM Objects Mapping</title>
@@ -978,10 +982,25 @@ int max_width, max_height;</synopsis>
         If the parameters are deemed valid, drivers then create, initialize and
         return an instance of struct <structname>drm_framebuffer</structname>.
         If desired the instance can be embedded in a larger driver-specific
-        structure. The new instance is initialized with a call to
-        <function>drm_framebuffer_init</function> which takes a pointer to DRM
-        frame buffer operations (struct
-        <structname>drm_framebuffer_funcs</structname>). Frame buffer operations are
+	structure. Drivers must fill its <structfield>width</structfield>,
+	<structfield>height</structfield>, <structfield>pitches</structfield>,
+        <structfield>offsets</structfield>, <structfield>depth</structfield>,
+        <structfield>bits_per_pixel</structfield> and
+        <structfield>pixel_format</structfield> fields from the values passed
+        through the <parameter>drm_mode_fb_cmd2</parameter> argument. They
+        should call the <function>drm_helper_mode_fill_fb_struct</function>
+        helper function to do so.
+      </para>
+
+      <para>
+	The initailization of the new framebuffer instance is finalized with a
+	call to <function>drm_framebuffer_init</function> which takes a pointer
+	to DRM frame buffer operations (struct
+	<structname>drm_framebuffer_funcs</structname>). Note that this function
+	publishes the framebuffer and so from this point on it can be accessed
+	concurrently from other threads. Hence it must be the last step in the
+	driver's framebuffer initialization sequence. Frame buffer operations
+	are
         <itemizedlist>
           <listitem>
             <synopsis>int (*create_handle)(struct drm_framebuffer *fb,
@@ -1022,16 +1041,16 @@ int max_width, max_height;</synopsis>
         </itemizedlist>
       </para>
       <para>
-        After initializing the <structname>drm_framebuffer</structname>
-        instance drivers must fill its <structfield>width</structfield>,
-        <structfield>height</structfield>, <structfield>pitches</structfield>,
-        <structfield>offsets</structfield>, <structfield>depth</structfield>,
-        <structfield>bits_per_pixel</structfield> and
-        <structfield>pixel_format</structfield> fields from the values passed
-        through the <parameter>drm_mode_fb_cmd2</parameter> argument. They
-        should call the <function>drm_helper_mode_fill_fb_struct</function>
-        helper function to do so.
-      </para>
+	The lifetime of a drm framebuffer is controlled with a reference count,
+	drivers can grab additional references with
+	<function>drm_framebuffer_reference</function> </para> and drop them
+	again with <function>drm_framebuffer_unreference</function>. For
+	driver-private framebuffers for which the last reference is never
+	dropped (e.g. for the fbdev framebuffer when the struct
+	<structname>drm_framebuffer</structname> is embedded into the fbdev
+	helper struct) drivers can manually clean up a framebuffer at module
+	unload time with
+	<function>drm_framebuffer_unregister_private</function>.
     </sect2>
     <sect2>
       <title>Output Polling</title>
@@ -1043,6 +1062,22 @@ int max_width, max_height;</synopsis>
         operation.
       </para>
     </sect2>
+    <sect2>
+      <title>Locking</title>
+      <para>
+        Beside some lookup structures with their own locking (which is hidden
+	behind the interface functions) most of the modeset state is protected
+	by the <code>dev-&lt;mode_config.lock</code> mutex and additionally
+	per-crtc locks to allow cursor updates, pageflips and similar operations
+	to occur concurrently with background tasks like output detection.
+	Operations which cross domains like a full modeset always grab all
+	locks. Drivers there need to protect resources shared between crtcs with
+	additional locking. They also need to be careful to always grab the
+	relevant crtc locks if a modset functions touches crtc state, e.g. for
+	load detection (which does only grab the <code>mode_config.lock</code>
+	to allow concurrent screen updates on live crtcs).
+      </para>
+    </sect2>
   </sect1>
 
   <!-- Internals: kms initialization and cleanup -->
@@ -1125,6 +1160,12 @@ int max_width, max_height;</synopsis>
             without waiting for rendering or page flip to complete and must block
             any new rendering to the frame buffer until the page flip completes.
           </para>
+          <para>
+            If a page flip can be successfully scheduled the driver must set the
+            <code>drm_crtc-&lt;fb</code> field to the new framebuffer pointed to
+            by <code>fb</code>. This is important so that the reference counting
+            on framebuffers stays balanced.
+          </para>
           <para>
             If a page flip is already pending, the
             <methodname>page_flip</methodname> operation must return
@@ -1609,6 +1650,10 @@ void intel_crt_init(struct drm_device *dev)
         make its properties available to applications.
       </para>
     </sect2>
+    <sect2>
+      <title>KMS API Functions</title>
+!Edrivers/gpu/drm/drm_crtc.c
+    </sect2>
   </sect1>
 
   <!-- Internals: kms helper functions -->
@@ -2104,6 +2149,7 @@ void intel_crt_init(struct drm_device *dev)
       <title>fbdev Helper Functions Reference</title>
 !Pdrivers/gpu/drm/drm_fb_helper.c fbdev helpers
 !Edrivers/gpu/drm/drm_fb_helper.c
+!Iinclude/drm/drm_fb_helper.h
     </sect2>
     <sect2>
       <title>Display Port Helper Functions Reference</title>
@@ -2111,6 +2157,10 @@ void intel_crt_init(struct drm_device *dev)
 !Iinclude/drm/drm_dp_helper.h
 !Edrivers/gpu/drm/drm_dp_helper.c
     </sect2>
+    <sect2>
+      <title>EDID Helper Functions Reference</title>
+!Edrivers/gpu/drm/drm_edid.c
+    </sect2>
   </sect1>
 
   <!-- Internals: vertical blanking -->

Documentation/DocBook/media/dvb/dvbapi.xml

@@ -84,7 +84,7 @@ Added ISDB-T test originally written by Patrick Boettcher
 
 
 <title>LINUX DVB API</title>
-<subtitle>Version 5.8</subtitle>
+<subtitle>Version 5.10</subtitle>
 <!-- ADD THE CHAPTERS HERE -->
   <chapter id="dvb_introdution">
     &sub-intro;

Documentation/DocBook/media/dvb/dvbproperty.xml

@@ -7,14 +7,41 @@ the capability ioctls weren't implemented yet via the new way.</para>
 <para>The typical usage for the <constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant>
 API is to replace the ioctl's were the <link linkend="dvb-frontend-parameters">
 struct <constant>dvb_frontend_parameters</constant></link> were used.</para>
+<section id="dtv-stats">
+<title>DTV stats type</title>
+<programlisting>
+struct dtv_stats {
+	__u8 scale;	/* enum fecap_scale_params type */
+	union {
+		__u64 uvalue;	/* for counters and relative scales */
+		__s64 svalue;	/* for 1/1000 dB measures */
+	};
+} __packed;
+</programlisting>
+</section>
+<section id="dtv-fe-stats">
+<title>DTV stats type</title>
+<programlisting>
+#define MAX_DTV_STATS   4
+
+struct dtv_fe_stats {
+	__u8 len;
+	struct dtv_stats stat[MAX_DTV_STATS];
+} __packed;
+</programlisting>
+</section>
+
 <section id="dtv-property">
 <title>DTV property type</title>
 <programlisting>
 /* Reserved fields should be set to 0 */
+
 struct dtv_property {
 	__u32 cmd;
+	__u32 reserved[3];
 	union {
 		__u32 data;
+		struct dtv_fe_stats st;
 		struct {
 			__u8 data[32];
 			__u32 len;
@@ -440,7 +467,7 @@ typedef enum fe_delivery_system {
 		<title><constant>DTV-ISDBT-LAYER*</constant> parameters</title>
 		<para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
 			ISDB-T hierarchical layers can be decoded simultaneously. For that
-			reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders.</para>
+			reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders.</para>
 		<para>ISDB-T has 3 hierarchical layers which each can use a part of the
 			available segments. The total number of segments over all layers has
 			to 13 in ISDB-T.</para>
@@ -850,6 +877,147 @@ enum fe_interleaving {
 	<para>use the special macro LNA_AUTO to set LNA auto</para>
 	</section>
 </section>
+
+	<section id="frontend-stat-properties">
+	<title>Frontend statistics indicators</title>
+	<para>The values are returned via <constant>dtv_property.stat</constant>.
+	      If the property is supported, <constant>dtv_property.stat.len</constant> is bigger than zero.</para>
+	<para>For most delivery systems, <constant>dtv_property.stat.len</constant>
+	      will be 1 if the stats is supported, and the properties will
+	      return a single value for each parameter.</para>
+	<para>It should be noticed, however, that new OFDM delivery systems
+	      like ISDB can use different modulation types for each group of
+	      carriers. On such standards, up to 3 groups of statistics can be
+	      provided, and <constant>dtv_property.stat.len</constant> is updated
+	      to reflect the "global" metrics, plus one metric per each carrier
+	      group (called "layer" on ISDB).</para>
+	<para>So, in order to be consistent with other delivery systems, the first
+	      value at <link linkend="dtv-stats"><constant>dtv_property.stat.dtv_stats</constant></link>
+	      array refers to the global metric. The other elements of the array
+	      represent each layer, starting from layer A(index 1),
+	      layer B (index 2) and so on.</para>
+	<para>The number of filled elements are stored at <constant>dtv_property.stat.len</constant>.</para>
+	<para>Each element of the <constant>dtv_property.stat.dtv_stats</constant> array consists on two elements:</para>
+	<itemizedlist mark='opencircle'>
+		<listitem><para><constant>svalue</constant> or <constant>uvalue</constant>, where
+			<constant>svalue</constant> is for signed values of the measure (dB measures)
+			and <constant>uvalue</constant> is for unsigned values (counters, relative scale)</para></listitem>
+		<listitem><para><constant>scale</constant> - Scale for the value. It can be:</para>
+			<section id = "fecap-scale-params">
+			<itemizedlist mark='bullet'>
+				<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition)</para></listitem>
+				<listitem><para><constant>FE_SCALE_DECIBEL</constant> - parameter is a signed value, measured in 1/1000 dB</para></listitem>
+				<listitem><para><constant>FE_SCALE_RELATIVE</constant> - parameter is a unsigned value, where 0 means 0% and 65535 means 100%.</para></listitem>
+				<listitem><para><constant>FE_SCALE_COUNTER</constant> - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time.</para></listitem>
+			</itemizedlist>
+			</section>
+		</listitem>
+	</itemizedlist>
+	<section id="DTV-STAT-SIGNAL-STRENGTH">
+		<title><constant>DTV_STAT_SIGNAL_STRENGTH</constant></title>
+		<para>Indicates the signal strength level at the analog part of the tuner or of the demod.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</listitem>
+			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-CNR">
+		<title><constant>DTV_STAT_CNR</constant></title>
+		<para>Indicates the Signal to Noise ratio for the main carrier.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</listitem>
+			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-PRE-ERROR-BIT-COUNT">
+		<title><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></title>
+		<para>Measures the number of bit errors before the forward error correction (FEC) on the inner coding block (before Viterbi, LDPC or other inner code).</para>
+		<para>This measure is taken during the same interval as <constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant>.</para>
+		<para>In order to get the BER (Bit Error Rate) measurement, it should be divided by
+		<link linkend="DTV-STAT-PRE-TOTAL-BIT-COUNT"><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></link>.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-PRE-TOTAL-BIT-COUNT">
+		<title><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></title>
+		<para>Measures the amount of bits received before the inner code block, during the same period as
+		<link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
+		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
+		      as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-POST-ERROR-BIT-COUNT">
+		<title><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></title>
+		<para>Measures the number of bit errors after the forward error correction (FEC) done by inner code block (after Viterbi, LDPC or other inner code).</para>
+		<para>This measure is taken during the same interval as <constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant>.</para>
+		<para>In order to get the BER (Bit Error Rate) measurement, it should be divided by
+		<link linkend="DTV-STAT-POST-TOTAL-BIT-COUNT"><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></link>.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-POST-TOTAL-BIT-COUNT">
+		<title><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></title>
+		<para>Measures the amount of bits received after the inner coding, during the same period as
+		<link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
+		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
+		      as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-ERROR-BLOCK-COUNT">
+		<title><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></title>
+		<para>Measures the number of block errors after the outer forward error correction coding (after Reed-Solomon or other outer code).</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-TOTAL-BLOCK-COUNT">
+		<title><constant>DTV-STAT_TOTAL_BLOCK_COUNT</constant></title>
+		<para>Measures the total number of blocks received during the same period as
+		<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link> measurement was taken.</para>
+		<para>It can be used to calculate the PER indicator, by dividing
+		<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>
+		by <link linkend="DTV-STAT-TOTAL-BLOCK-COUNT"><constant>DTV-STAT-TOTAL-BLOCK-COUNT</constant></link>.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring
+			<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</listitem>
+		</itemizedlist>
+	</section>
+	</section>
+
 	<section id="frontend-property-terrestrial-systems">
 	<title>Properties used on terrestrial delivery systems</title>
 		<section id="dvbt-params">
@@ -871,6 +1039,7 @@ enum fe_interleaving {
 				<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="dvbt2-params">
 			<title>DVB-T2 delivery system</title>
@@ -895,6 +1064,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="isdbt">
 		<title>ISDB-T delivery system</title>
@@ -948,6 +1118,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERC_SEGMENT_COUNT</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERC_TIME_INTERLEAVING</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="atsc-params">
 			<title>ATSC delivery system</title>
@@ -961,6 +1132,7 @@ enum fe_interleaving {
 				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
 			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="atscmh-params">
 			<title>ATSC-MH delivery system</title>
@@ -988,6 +1160,7 @@ enum fe_interleaving {
 				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-C"><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-D"><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></link></para></listitem>
 			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="dtmb-params">
 			<title>DTMB delivery system</title>
@@ -1007,6 +1180,7 @@ enum fe_interleaving {
 				<listitem><para><link linkend="DTV-INTERLEAVING"><constant>DTV_INTERLEAVING</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 	</section>
 	<section id="frontend-property-cable-systems">
@@ -1028,6 +1202,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 	</section>
 	<section id="dvbc-annex-b-params">
 		<title>DVB-C Annex B delivery system</title>
@@ -1043,6 +1218,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 	</section>
 	</section>
 	<section id="frontend-property-satellital-systems">
@@ -1062,6 +1238,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-TONE"><constant>DTV_TONE</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		<para>Future implementations might add those two missing parameters:</para>
 		<itemizedlist mark='opencircle'>
 			<listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem>
@@ -1077,6 +1254,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-ROLLOFF"><constant>DTV_ROLLOFF</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 	</section>
 	<section id="turbo-params">
 		<title>Turbo code delivery system</title>

Documentation/DocBook/media/dvb/frontend.xml

@@ -230,7 +230,7 @@ typedef enum fe_status {
 <entry align="char">The frontend has found a DVB signal</entry>
 </row><row>
 <entry align="char">FE_HAS_VITERBI</entry>
-<entry align="char">The frontend FEC code is stable</entry>
+<entry align="char">The frontend FEC inner coding (Viterbi, LDPC or other inner code) is stable</entry>
 </row><row>
 <entry align="char">FE_HAS_SYNC</entry>
 <entry align="char">Syncronization bytes was found</entry>

Documentation/DocBook/media/v4l/common.xml

@@ -609,7 +609,7 @@ to zero and the <constant>VIDIOC_G_STD</constant>,
 	<para>Applications can make use of the <xref linkend="input-capabilities" /> and
 <xref linkend="output-capabilities"/> flags to determine whether the video standard ioctls
 are available for the device.</para>
-&ENOTTY;.
+
 	<para>See <xref linkend="buffer" /> for a rationale. Probably
 even USB cameras follow some well known video standard. It might have
 been better to explicitly indicate elsewhere if a device cannot live

Documentation/DocBook/media/v4l/compat.xml

@@ -2477,6 +2477,22 @@ that used it. It was originally scheduled for removal in 2.6.35.
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.9</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added timestamp types to
+	  <structfield>flags</structfield> field in
+	  <structname>v4l2_buffer</structname>. See <xref
+	  linkend="buffer-flags" />.</para>
+        </listitem>
+        <listitem>
+	  <para>Added <constant>V4L2_EVENT_CTRL_CH_RANGE</constant> control event
+	  changes flag. See <xref linkend="changes-flags"/>.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 

Documentation/DocBook/media/v4l/controls.xml

@@ -203,29 +203,6 @@ and should not be used in new drivers and applications.</entry>
 	    <entry>boolean</entry>
 	    <entry>Mirror the picture vertically.</entry>
 	  </row>
-	<row>
-	  <entry><constant>V4L2_CID_HCENTER_DEPRECATED</constant> (formerly <constant>V4L2_CID_HCENTER</constant>)</entry>
-	    <entry>integer</entry>
-	    <entry>Horizontal image centering. This control is
-deprecated. New drivers and applications should use the <link
-linkend="camera-controls">Camera class controls</link>
-<constant>V4L2_CID_PAN_ABSOLUTE</constant>,
-<constant>V4L2_CID_PAN_RELATIVE</constant> and
-<constant>V4L2_CID_PAN_RESET</constant> instead.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CID_VCENTER_DEPRECATED</constant>
-	    (formerly <constant>V4L2_CID_VCENTER</constant>)</entry>
-	    <entry>integer</entry>
-	    <entry>Vertical image centering. Centering is intended to
-<emphasis>physically</emphasis> adjust cameras. For image cropping see
-<xref linkend="crop" />, for clipping <xref linkend="overlay" />. This
-control is deprecated. New drivers and applications should use the
-<link linkend="camera-controls">Camera class controls</link>
-<constant>V4L2_CID_TILT_ABSOLUTE</constant>,
-<constant>V4L2_CID_TILT_RELATIVE</constant> and
-<constant>V4L2_CID_TILT_RESET</constant> instead.</entry>
-	  </row>
 	  <row id="v4l2-power-line-frequency">
 	    <entry><constant>V4L2_CID_POWER_LINE_FREQUENCY</constant></entry>
 	    <entry>enum</entry>

Documentation/DocBook/media/v4l/io.xml

@@ -477,7 +477,7 @@ rest should be evident.</para>
 
     <note>
       <title>Experimental</title>
-      <para>This is an <link linkend="experimental"> experimental </link>
+      <para>This is an <link linkend="experimental">experimental</link>
       interface and may change in the future.</para>
     </note>
 
@@ -488,7 +488,7 @@ DMA buffer from userspace using a file descriptor previously exported for a
 different or the same device (known as the importer role), or both. This
 section describes the DMABUF importer role API in V4L2.</para>
 
-    <para>Refer to <link linked="vidioc-expbuf"> DMABUF exporting </link> for
+    <para>Refer to <link linkend="vidioc-expbuf">DMABUF exporting</link> for
 details about exporting V4L2 buffers as DMABUF file descriptors.</para>
 
 <para>Input and output devices support the streaming I/O method when the
@@ -741,17 +741,19 @@ applications when an output stream.</entry>
 	    <entry>struct timeval</entry>
 	    <entry><structfield>timestamp</structfield></entry>
 	    <entry></entry>
-	    <entry><para>For input streams this is the
-system time (as returned by the <function>gettimeofday()</function>
-function) when the first data byte was captured. For output streams
-the data will not be displayed before this time, secondary to the
-nominal frame rate determined by the current video standard in
-enqueued order. Applications can for example zero this field to
-display frames as soon as possible. The driver stores the time at
-which the first data byte was actually sent out in the
-<structfield>timestamp</structfield> field. This permits
-applications to monitor the drift between the video and system
-clock.</para></entry>
+	    <entry><para>For input streams this is time when the first data
+	    byte was captured, as returned by the
+	    <function>clock_gettime()</function> function for the relevant
+	    clock id; see <constant>V4L2_BUF_FLAG_TIMESTAMP_*</constant> in
+	    <xref linkend="buffer-flags" />. For output streams the data
+	    will not be displayed before this time, secondary to the nominal
+	    frame rate determined by the current video standard in enqueued
+	    order. Applications can for example zero this field to display
+	    frames as soon as possible. The driver stores the time at which
+	    the first data byte was actually sent out in the
+	    <structfield>timestamp</structfield> field. This permits
+	    applications to monitor the drift between the video and system
+	    clock.</para></entry>
 	  </row>
 	  <row>
 	    <entry>&v4l2-timecode;</entry>
@@ -903,7 +905,7 @@ should set this to 0.</entry>
 	  </row>
 	  <row>
 	    <entry></entry>
-	    <entry>__unsigned long</entry>
+	    <entry>unsigned long</entry>
 	    <entry><structfield>userptr</structfield></entry>
 	    <entry>When the memory type in the containing &v4l2-buffer; is
 	      <constant>V4L2_MEMORY_USERPTR</constant>, this is a userspace
@@ -1114,6 +1116,35 @@ Typically applications shall use this flag for output buffers if the data
 in this buffer has not been created by the CPU but by some DMA-capable unit,
 in which case caches have not been used.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_TIMESTAMP_MASK</constant></entry>
+	    <entry>0xe000</entry>
+	    <entry>Mask for timestamp types below. To test the
+	    timestamp type, mask out bits not belonging to timestamp
+	    type by performing a logical and operation with buffer
+	    flags and timestamp mask.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN</constant></entry>
+	    <entry>0x0000</entry>
+	    <entry>Unknown timestamp type. This type is used by
+	    drivers before Linux 3.9 and may be either monotonic (see
+	    below) or realtime (wall clock). Monotonic clock has been
+	    favoured in embedded systems whereas most of the drivers
+	    use the realtime clock. Either kinds of timestamps are
+	    available in user space via
+	    <function>clock_gettime(2)</function> using clock IDs
+	    <constant>CLOCK_MONOTONIC</constant> and
+	    <constant>CLOCK_REALTIME</constant>, respectively.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC</constant></entry>
+	    <entry>0x2000</entry>
+	    <entry>The buffer timestamp has been taken from the
+	    <constant>CLOCK_MONOTONIC</constant> clock. To access the
+	    same clock outside V4L2, use
+	    <function>clock_gettime(2)</function> .</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/pixfmt-nv12m.xml

@@ -6,7 +6,7 @@
       <refnamediv>
 	<refname id="V4L2-PIX-FMT-NV12M"><constant>V4L2_PIX_FMT_NV12M</constant></refname>
 	<refname id="V4L2-PIX-FMT-NV21M"><constant>V4L2_PIX_FMT_NV21M</constant></refname>
-	<refname id="V4L2-PIX-FMT-NV12MT_16X16"><constant>V4L2_PIX_FMT_NV12MT_16X16</constant></refname>
+	<refname id="V4L2-PIX-FMT-NV12MT-16X16"><constant>V4L2_PIX_FMT_NV12MT_16X16</constant></refname>
 	<refpurpose>Variation of <constant>V4L2_PIX_FMT_NV12</constant> and <constant>V4L2_PIX_FMT_NV21</constant> with planes
 	  non contiguous in memory. </refpurpose>
       </refnamediv>

Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml

@@ -0,0 +1,34 @@
+	<refentry>
+	  <refmeta>
+	    <refentrytitle>
+	      V4L2_PIX_FMT_SBGGR10ALAW8 ('aBA8'),
+	      V4L2_PIX_FMT_SGBRG10ALAW8 ('aGA8'),
+	      V4L2_PIX_FMT_SGRBG10ALAW8 ('agA8'),
+	      V4L2_PIX_FMT_SRGGB10ALAW8 ('aRA8'),
+	    </refentrytitle>
+	    &manvol;
+	  </refmeta>
+	  <refnamediv>
+	    <refname id="V4L2-PIX-FMT-SBGGR10ALAW8">
+	      <constant>V4L2_PIX_FMT_SBGGR10ALAW8</constant>
+	    </refname>
+	    <refname id="V4L2-PIX-FMT-SGBRG10ALAW8">
+	      <constant>V4L2_PIX_FMT_SGBRG10ALAW8</constant>
+	    </refname>
+	    <refname id="V4L2-PIX-FMT-SGRBG10ALAW8">
+	      <constant>V4L2_PIX_FMT_SGRBG10ALAW8</constant>
+	    </refname>
+	    <refname id="V4L2-PIX-FMT-SRGGB10ALAW8">
+	      <constant>V4L2_PIX_FMT_SRGGB10ALAW8</constant>
+	    </refname>
+	    <refpurpose>10-bit Bayer formats compressed to 8 bits</refpurpose>
+	  </refnamediv>
+	  <refsect1>
+	    <title>Description</title>
+	    <para>The following four pixel formats are raw sRGB / Bayer
+	    formats with 10 bits per color compressed to 8 bits each,
+	    using the A-LAW algorithm. Each color component consumes 8
+	    bits of memory. In other respects this format is similar to
+	    <xref linkend="V4L2-PIX-FMT-SRGGB8"></xref>.</para>
+	  </refsect1>
+	</refentry>

Documentation/DocBook/media/v4l/pixfmt-uv8.xml

@@ -0,0 +1,62 @@
+	<refentry id="V4L2-PIX-FMT-UV8">
+	  <refmeta>
+	    <refentrytitle>V4L2_PIX_FMT_UV8  ('UV8')</refentrytitle>
+	    &manvol;
+	  </refmeta>
+	  <refnamediv>
+	    <refname><constant>V4L2_PIX_FMT_UV8</constant></refname>
+	    <refpurpose>UV plane interleaved</refpurpose>
+	  </refnamediv>
+	  <refsect1>
+	    <title>Description</title>
+	    <para>In this format there is no Y plane, Only CbCr plane. ie
+	    (UV interleaved)</para>
+	    <example>
+	    <title>
+	      <constant>V4L2_PIX_FMT_UV8</constant>
+	       pixel image
+	    </title>
+
+	    <formalpara>
+	      <title>Byte Order.</title>
+	      <para>Each cell is one byte.
+	        <informaltable frame="none">
+	        <tgroup cols="5" align="center">
+		  <colspec align="left" colwidth="2*" />
+		  <tbody valign="top">
+		    <row>
+		      <entry>start&nbsp;+&nbsp;0:</entry>
+		      <entry>Cb<subscript>00</subscript></entry>
+		      <entry>Cr<subscript>00</subscript></entry>
+		      <entry>Cb<subscript>01</subscript></entry>
+		      <entry>Cr<subscript>01</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;4:</entry>
+		      <entry>Cb<subscript>10</subscript></entry>
+		      <entry>Cr<subscript>10</subscript></entry>
+		      <entry>Cb<subscript>11</subscript></entry>
+		      <entry>Cr<subscript>11</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;8:</entry>
+		      <entry>Cb<subscript>20</subscript></entry>
+		      <entry>Cr<subscript>20</subscript></entry>
+		      <entry>Cb<subscript>21</subscript></entry>
+		      <entry>Cr<subscript>21</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;12:</entry>
+		      <entry>Cb<subscript>30</subscript></entry>
+		      <entry>Cr<subscript>30</subscript></entry>
+		      <entry>Cb<subscript>31</subscript></entry>
+		      <entry>Cr<subscript>31</subscript></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	      </formalpara>
+	    </example>
+	  </refsect1>
+	</refentry>

Documentation/DocBook/media/v4l/pixfmt.xml

@@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
     &sub-srggb8;
     &sub-sbggr16;
     &sub-srggb10;
+    &sub-srggb10alaw8;
     &sub-srggb10dpcm8;
     &sub-srggb12;
   </section>
@@ -701,6 +702,7 @@ information.</para>
     &sub-y12;
     &sub-y10b;
     &sub-y16;
+    &sub-uv8;
     &sub-yuyv;
     &sub-uyvy;
     &sub-yvyu;

Documentation/DocBook/media/v4l/v4l2.xml

@@ -139,6 +139,16 @@ structs, ioctls) must be noted in more detail in the history chapter
 (compat.xml), along with the possible impact on existing drivers and
 applications. -->
 
+      <revision>
+	<revnumber>3.9</revnumber>
+	<date>2012-12-03</date>
+	<authorinitials>sa, sn</authorinitials>
+	<revremark>Added timestamp types to v4l2_buffer.
+	Added <constant>V4L2_EVENT_CTRL_CH_RANGE</constant> control
+	event changes flag, see <xref linkend="changes-flags"/>.
+	</revremark>
+      </revision>
+
       <revision>
 	<revnumber>3.6</revnumber>
 	<date>2012-07-02</date>
@@ -472,7 +482,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.6</subtitle>
+ <subtitle>Revision 3.9</subtitle>
 
   <chapter id="common">
     &sub-common;

Documentation/DocBook/media/v4l/vidioc-dqevent.xml

@@ -261,6 +261,12 @@
 	    <entry>This control event was triggered because the control flags
 		changed.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_EVENT_CTRL_CH_RANGE</constant></entry>
+	    <entry>0x0004</entry>
+	    <entry>This control event was triggered because the minimum,
+	    maximum, step or the default value of the control changed.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/vidioc-expbuf.xml

@@ -83,15 +83,14 @@ descriptor. The application may pass it to other DMABUF-aware devices. Refer to
 <link linkend="dmabuf">DMABUF importing</link> for details about importing
 DMABUF files into V4L2 nodes. It is recommended to close a DMABUF file when it
 is no longer used to allow the associated memory to be reclaimed. </para>
-
   </refsect1>
+
   <refsect1>
-   <section>
-      <title>Examples</title>
+    <title>Examples</title>
 
-      <example>
-	<title>Exporting a buffer.</title>
-	<programlisting>
+    <example>
+      <title>Exporting a buffer.</title>
+      <programlisting>
 int buffer_export(int v4lfd, &v4l2-buf-type; bt, int index, int *dmafd)
 {
 	&v4l2-exportbuffer; expbuf;
@@ -108,12 +107,12 @@ int buffer_export(int v4lfd, &v4l2-buf-type; bt, int index, int *dmafd)
 
 	return 0;
 }
-        </programlisting>
-      </example>
+      </programlisting>
+    </example>
 
-      <example>
-	<title>Exporting a buffer using the multi-planar API.</title>
-	<programlisting>
+    <example>
+      <title>Exporting a buffer using the multi-planar API.</title>
+      <programlisting>
 int buffer_export_mp(int v4lfd, &v4l2-buf-type; bt, int index,
 	int dmafd[], int n_planes)
 {
@@ -137,12 +136,9 @@ int buffer_export_mp(int v4lfd, &v4l2-buf-type; bt, int index,
 
 	return 0;
 }
-        </programlisting>
-      </example>
-   </section>
-  </refsect1>
+      </programlisting>
+    </example>
 
-  <refsect1>
     <table pgwide="1" frame="none" id="v4l2-exportbuffer">
       <title>struct <structname>v4l2_exportbuffer</structname></title>
       <tgroup cols="3">

Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml

@@ -64,7 +64,9 @@ return an &EINVAL;. When the <structfield>value</structfield> is out
 of bounds drivers can choose to take the closest valid value or return
 an &ERANGE;, whatever seems more appropriate. However,
 <constant>VIDIOC_S_CTRL</constant> is a write-only ioctl, it does not
-return the actual new value.</para>
+return the actual new value. If the <structfield>value</structfield>
+is inappropriate for the control (e.g. if it refers to an unsupported
+menu index of a menu control), then &EINVAL; is returned as well.</para>
 
     <para>These ioctls work only with user controls. For other
 control classes the &VIDIOC-G-EXT-CTRLS;, &VIDIOC-S-EXT-CTRLS; or
@@ -99,7 +101,9 @@ application.</entry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The &v4l2-control; <structfield>id</structfield> is
-invalid.</para>
+invalid or the <structfield>value</structfield> is inappropriate for
+the given control (i.e. if a menu item is selected that is not supported
+by the driver according to &VIDIOC-QUERYMENU;).</para>
 	</listitem>
       </varlistentry>
       <varlistentry>

Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml

@@ -106,7 +106,9 @@ value or if an error is returned.</para>
 &EINVAL;. When the value is out of bounds drivers can choose to take
 the closest valid value or return an &ERANGE;, whatever seems more
 appropriate. In the first case the new value is set in
-&v4l2-ext-control;.</para>
+&v4l2-ext-control;. If the new control value is inappropriate (e.g. the
+given menu index is not supported by the menu control), then this will
+also result in an &EINVAL; error.</para>
 
     <para>The driver will only set/get these controls if all control
 values are correct. This prevents the situation where only some of the
@@ -199,13 +201,46 @@ also be zero.</entry>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>error_idx</structfield></entry>
-	    <entry>Set by the driver in case of an error. If it is equal
-to <structfield>count</structfield>, then no actual changes were made to
-controls. In other words, the error was not associated with setting a particular
-control. If it is another value, then only the controls up to <structfield>error_idx-1</structfield>
-were modified and control <structfield>error_idx</structfield> is the one that
-caused the error. The <structfield>error_idx</structfield> value is undefined
-if the ioctl returned 0 (success).</entry>
+	    <entry><para>Set by the driver in case of an error. If the error is
+associated with a particular control, then <structfield>error_idx</structfield>
+is set to the index of that control. If the error is not related to a specific
+control, or the validation step failed (see below), then
+<structfield>error_idx</structfield> is set to <structfield>count</structfield>.
+The value is undefined if the ioctl returned 0 (success).</para>
+
+<para>Before controls are read from/written to hardware a validation step
+takes place: this checks if all controls in the list are valid controls,
+if no attempt is made to write to a read-only control or read from a write-only
+control, and any other up-front checks that can be done without accessing the
+hardware. The exact validations done during this step are driver dependent
+since some checks might require hardware access for some devices, thus making
+it impossible to do those checks up-front. However, drivers should make a
+best-effort to do as many up-front checks as possible.</para>
+
+<para>This check is done to avoid leaving the hardware in an inconsistent state due
+to easy-to-avoid problems. But it leads to another problem: the application needs to
+know whether an error came from the validation step (meaning that the hardware
+was not touched) or from an error during the actual reading from/writing to hardware.</para>
+
+<para>The, in hindsight quite poor, solution for that is to set <structfield>error_idx</structfield>
+to <structfield>count</structfield> if the validation failed. This has the
+unfortunate side-effect that it is not possible to see which control failed the
+validation. If the validation was successful and the error happened while
+accessing the hardware, then <structfield>error_idx</structfield> is less than
+<structfield>count</structfield> and only the controls up to
+<structfield>error_idx-1</structfield> were read or written correctly, and the
+state of the remaining controls is undefined.</para>
+
+<para>Since <constant>VIDIOC_TRY_EXT_CTRLS</constant> does not access hardware
+there is also no need to handle the validation step in this special way,
+so <structfield>error_idx</structfield> will just be set to the control that
+failed the validation step instead of to <structfield>count</structfield>.
+This means that if <constant>VIDIOC_S_EXT_CTRLS</constant> fails with
+<structfield>error_idx</structfield> set to <structfield>count</structfield>,
+then you can call <constant>VIDIOC_TRY_EXT_CTRLS</constant> to try to discover
+the actual control that failed the validation step. Unfortunately, there
+is no <constant>TRY</constant> equivalent for <constant>VIDIOC_G_EXT_CTRLS</constant>.
+</para></entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
@@ -298,8 +333,10 @@ These controls are described in <xref
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The &v4l2-ext-control; <structfield>id</structfield>
-is invalid or the &v4l2-ext-controls;
-<structfield>ctrl_class</structfield> is invalid. This error code is
+is invalid, the &v4l2-ext-controls;
+<structfield>ctrl_class</structfield> is invalid, or the &v4l2-ext-control;
+<structfield>value</structfield> was inappropriate (e.g. the given menu
+index is not supported by the driver). This error code is
 also returned by the <constant>VIDIOC_S_EXT_CTRLS</constant> and
 <constant>VIDIOC_TRY_EXT_CTRLS</constant> ioctls if two or more
 control values are in conflict.</para>

Documentation/DocBook/media/v4l/vidioc-querycap.xml

@@ -76,7 +76,7 @@ make sure the strings are properly NUL-terminated.</para></entry>
 	  <row>
 	    <entry>__u8</entry>
 	    <entry><structfield>card</structfield>[32]</entry>
-	    <entry>Name of the device, a NUL-terminated ASCII string.
+	    <entry>Name of the device, a NUL-terminated UTF-8 string.
 For example: "Yoyodyne TV/FM". One driver may support different brands
 or models of video hardware. This information is intended for users,
 for example in a menu of available devices. Since multiple TV cards of

Documentation/DocBook/media_api.tmpl

@@ -22,6 +22,7 @@
 
 <!-- LinuxTV v4l-dvb repository. -->
 <!ENTITY v4l-dvb		"<ulink url='http://linuxtv.org/repo/'>http://linuxtv.org/repo/</ulink>">
+<!ENTITY dash-ent-10            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 ]>
 
 <book id="media_api">

Documentation/EDID/HOWTO.txt

@@ -28,11 +28,30 @@ Makefile environment are given here.
 To create binary EDID and C source code files from the existing data
 material, simply type "make".
 
-If you want to create your own EDID file, copy the file 1024x768.S and
-replace the settings with your own data. The CRC value in the last line
+If you want to create your own EDID file, copy the file 1024x768.S,
+replace the settings with your own data and add a new target to the
+Makefile. Please note that the EDID data structure expects the timing
+values in a different way as compared to the standard X11 format.
+
+X11:
+HTimings:  hdisp hsyncstart hsyncend htotal
+VTimings:  vdisp vsyncstart vsyncend vtotal
+
+EDID:
+#define XPIX hdisp
+#define XBLANK htotal-hdisp
+#define XOFFSET hsyncstart-hdisp
+#define XPULSE hsyncend-hsyncstart
+
+#define YPIX vdisp
+#define YBLANK vtotal-vdisp
+#define YOFFSET (63+(vsyncstart-vdisp))
+#define YPULSE (63+(vsyncend-vsyncstart))
+
+The CRC value in the last line
   #define CRC 0x55
-is a bit tricky. After a first version of the binary data set is
-created, it must be be checked with the "edid-decode" utility which will
+also is a bit tricky. After a first version of the binary data set is
+created, it must be checked with the "edid-decode" utility which will
 most probably complain about a wrong CRC. Fortunately, the utility also
 displays the correct CRC which must then be inserted into the source
 file. After the make procedure is repeated, the EDID data set is ready

Documentation/IPMI.txt

@@ -348,34 +348,40 @@ You can change this at module load time (for a module) with:
 
   modprobe ipmi_si.o type=<type1>,<type2>....
        ports=<port1>,<port2>... addrs=<addr1>,<addr2>...
-       irqs=<irq1>,<irq2>... trydefaults=[0|1]
+       irqs=<irq1>,<irq2>...
        regspacings=<sp1>,<sp2>,... regsizes=<size1>,<size2>,...
        regshifts=<shift1>,<shift2>,...
        slave_addrs=<addr1>,<addr2>,...
        force_kipmid=<enable1>,<enable2>,...
        kipmid_max_busy_us=<ustime1>,<ustime2>,...
        unload_when_empty=[0|1]
+       trydefaults=[0|1] trydmi=[0|1] tryacpi=[0|1]
+       tryplatform=[0|1] trypci=[0|1]
 
-Each of these except si_trydefaults is a list, the first item for the
+Each of these except try... items is a list, the first item for the
 first interface, second item for the second interface, etc.
 
 The si_type may be either "kcs", "smic", or "bt".  If you leave it blank, it
 defaults to "kcs".
 
-If you specify si_addrs as non-zero for an interface, the driver will
+If you specify addrs as non-zero for an interface, the driver will
 use the memory address given as the address of the device.  This
 overrides si_ports.
 
-If you specify si_ports as non-zero for an interface, the driver will
+If you specify ports as non-zero for an interface, the driver will
 use the I/O port given as the device address.
 
-If you specify si_irqs as non-zero for an interface, the driver will
+If you specify irqs as non-zero for an interface, the driver will
 attempt to use the given interrupt for the device.
 
-si_trydefaults sets whether the standard IPMI interface at 0xca2 and
+trydefaults sets whether the standard IPMI interface at 0xca2 and
 any interfaces specified by ACPE are tried.  By default, the driver
 tries it, set this value to zero to turn this off.
 
+The other try... items disable discovery by their corresponding
+names.  These are all enabled by default, set them to zero to disable
+them.  The tryplatform disables openfirmware.
+
 The next three parameters have to do with register layout.  The
 registers used by the interfaces may not appear at successive
 locations and they may not be in 8-bit registers.  These parameters

Documentation/block/cfq-iosched.txt

@@ -102,6 +102,64 @@ processing of request. Therefore, increasing the value can imporve the
 performace although this can cause the latency of some I/O to increase due
 to more number of requests.
 
+CFQ Group scheduling
+====================
+
+CFQ supports blkio cgroup and has "blkio." prefixed files in each
+blkio cgroup directory. It is weight-based and there are four knobs
+for configuration - weight[_device] and leaf_weight[_device].
+Internal cgroup nodes (the ones with children) can also have tasks in
+them, so the former two configure how much proportion the cgroup as a
+whole is entitled to at its parent's level while the latter two
+configure how much proportion the tasks in the cgroup have compared to
+its direct children.
+
+Another way to think about it is assuming that each internal node has
+an implicit leaf child node which hosts all the tasks whose weight is
+configured by leaf_weight[_device]. Let's assume a blkio hierarchy
+composed of five cgroups - root, A, B, AA and AB - with the following
+weights where the names represent the hierarchy.
+
+        weight leaf_weight
+ root :  125    125
+ A    :  500    750
+ B    :  250    500
+ AA   :  500    500
+ AB   : 1000    500
+
+root never has a parent making its weight is meaningless. For backward
+compatibility, weight is always kept in sync with leaf_weight. B, AA
+and AB have no child and thus its tasks have no children cgroup to
+compete with. They always get 100% of what the cgroup won at the
+parent level. Considering only the weights which matter, the hierarchy
+looks like the following.
+
+          root
+       /    |   \
+      A     B    leaf
+     500   250   125
+   /  |  \
+  AA  AB  leaf
+ 500 1000 750
+
+If all cgroups have active IOs and competing with each other, disk
+time will be distributed like the following.
+
+Distribution below root. The total active weight at this level is
+A:500 + B:250 + C:125 = 875.
+
+ root-leaf :   125 /  875      =~ 14%
+ A         :   500 /  875      =~ 57%
+ B(-leaf)  :   250 /  875      =~ 28%
+
+A has children and further distributes its 57% among the children and
+the implicit leaf node. The total active weight at this level is
+AA:500 + AB:1000 + A-leaf:750 = 2250.
+
+ A-leaf    : ( 750 / 2250) * A =~ 19%
+ AA(-leaf) : ( 500 / 2250) * A =~ 12%
+ AB(-leaf) : (1000 / 2250) * A =~ 25%
+
 CFQ IOPS Mode for group scheduling
 ===================================
 Basic CFQ design is to provide priority based time slices. Higher priority

Documentation/blockdev/nbd.txt

@@ -4,43 +4,13 @@
    can use a remote server as one of its block devices. So every time
    the client computer wants to read, e.g., /dev/nb0, it sends a
    request over TCP to the server, which will reply with the data read.
-   This can be used for stations with low disk space (or even diskless -
-   if you boot from floppy) to borrow disk space from another computer.
-   Unlike NFS, it is possible to put any filesystem on it, etc. It should
-   even be possible to use NBD as a root filesystem (I've never tried),
-   but it requires a user-level program to be in the initrd to start.
-   It also allows you to run block-device in user land (making server
-   and client physically the same computer, communicating using loopback).
-   
-   Current state: It currently works. Network block device is stable.
-   I originally thought that it was impossible to swap over TCP. It
-   turned out not to be true - swapping over TCP now works and seems
-   to be deadlock-free, but it requires heavy patches into Linux's
-   network layer.
-   
+   This can be used for stations with low disk space (or even diskless)
+   to borrow disk space from another computer.
+   Unlike NFS, it is possible to put any filesystem on it, etc.
+
    For more information, or to download the nbd-client and nbd-server
    tools, go to http://nbd.sf.net/.
 
-   Howto: To setup nbd, you can simply do the following:
-
-   First, serve a device or file from a remote server:
-
-   nbd-server <port-number> <device-or-file-to-serve-to-client>
-
-   e.g.,
-	root@server1 # nbd-server 1234 /dev/sdb1
-
-	(serves sdb1 partition on TCP port 1234)
-
-   Then, on the local (client) system:
-
-   nbd-client <server-name-or-IP> <server-port-number> /dev/nb[0-n]
-
-   e.g.,
-	root@client1 # nbd-client server1 1234 /dev/nb0
-
-	(creates the nb0 device on client1)
-
    The nbd kernel module need only be installed on the client
    system, as the nbd-server is completely in userspace. In fact,
    the nbd-server has been successfully ported to other operating

Documentation/cgroups/blkio-controller.txt

@@ -75,7 +75,7 @@ Throttling/Upper Limit policy
         mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
 
 - Specify a bandwidth rate on particular device for root group. The format
-  for policy is "<major>:<minor>  <byes_per_second>".
+  for policy is "<major>:<minor>  <bytes_per_second>".
 
         echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
 
@@ -94,13 +94,11 @@ Throttling/Upper Limit policy
 
 Hierarchical Cgroups
 ====================
-- Currently none of the IO control policy supports hierarchical groups. But
-  cgroup interface does allow creation of hierarchical cgroups and internally
-  IO policies treat them as flat hierarchy.
+- Currently only CFQ supports hierarchical groups. For throttling,
+  cgroup interface does allow creation of hierarchical cgroups and
+  internally it treats them as flat hierarchy.
 
-  So this patch will allow creation of cgroup hierarchcy but at the backend
-  everything will be treated as flat. So if somebody created a hierarchy like
-  as follows.
+  If somebody created a hierarchy like as follows.
 
 			root
 			/  \
@@ -108,16 +106,20 @@ Hierarchical Cgroups
 			|
 		     test3
 
-  CFQ and throttling will practically treat all groups at same level.
+  CFQ will handle the hierarchy correctly but and throttling will
+  practically treat all groups at same level. For details on CFQ
+  hierarchy support, refer to Documentation/block/cfq-iosched.txt.
+  Throttling will treat the hierarchy as if it looks like the
+  following.
 
 				pivot
 			     /  /   \  \
 			root  test1 test2  test3
 
-  Down the line we can implement hierarchical accounting/control support
-  and also introduce a new cgroup file "use_hierarchy" which will control
-  whether cgroup hierarchy is viewed as flat or hierarchical by the policy..
-  This is how memory controller also has implemented the things.
+  Nesting cgroups, while allowed, isn't officially supported and blkio
+  genereates warning when cgroups nest. Once throttling implements
+  hierarchy support, hierarchy will be supported and the warning will
+  be removed.
 
 Various user visible config options
 ===================================
@@ -172,6 +174,12 @@ Proportional weight policy files
 	  dev     weight
 	  8:16    300
 
+- blkio.leaf_weight[_device]
+	- Equivalents of blkio.weight[_device] for the purpose of
+          deciding how much weight tasks in the given cgroup has while
+          competing with the cgroup's child cgroups. For details,
+          please refer to Documentation/block/cfq-iosched.txt.
+
 - blkio.time
 	- disk time allocated to cgroup per device in milliseconds. First
 	  two fields specify the major and minor number of the device and
@@ -279,6 +287,11 @@ Proportional weight policy files
 	  and minor number of the device and third field specifies the number
 	  of times a group was dequeued from a particular device.
 
+- blkio.*_recursive
+	- Recursive version of various stats. These files show the
+          same information as their non-recursive counterparts but
+          include stats from all the descendant cgroups.
+
 Throttling/Upper limit policy files
 -----------------------------------
 - blkio.throttle.read_bps_device

Documentation/coccinelle.txt

@@ -87,6 +87,10 @@ As any static code analyzer, Coccinelle produces false
 positives. Thus, reports must be carefully checked, and patches
 reviewed.
 
+To enable verbose messages set the V= variable, for example:
+
+   make coccicheck MODE=report V=1
+
 
  Using Coccinelle with a single semantic patch
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Documentation/device-mapper/cache-policies.txt

@@ -0,0 +1,77 @@
+Guidance for writing policies
+=============================
+
+Try to keep transactionality out of it.  The core is careful to
+avoid asking about anything that is migrating.  This is a pain, but
+makes it easier to write the policies.
+
+Mappings are loaded into the policy at construction time.
+
+Every bio that is mapped by the target is referred to the policy.
+The policy can return a simple HIT or MISS or issue a migration.
+
+Currently there's no way for the policy to issue background work,
+e.g. to start writing back dirty blocks that are going to be evicte
+soon.
+
+Because we map bios, rather than requests it's easy for the policy
+to get fooled by many small bios.  For this reason the core target
+issues periodic ticks to the policy.  It's suggested that the policy
+doesn't update states (eg, hit counts) for a block more than once
+for each tick.  The core ticks by watching bios complete, and so
+trying to see when the io scheduler has let the ios run.
+
+
+Overview of supplied cache replacement policies
+===============================================
+
+multiqueue
+----------
+
+This policy is the default.
+
+The multiqueue policy has two sets of 16 queues: one set for entries
+waiting for the cache and another one for those in the cache.
+Cache entries in the queues are aged based on logical time. Entry into
+the cache is based on variable thresholds and queue selection is based
+on hit count on entry. The policy aims to take different cache miss
+costs into account and to adjust to varying load patterns automatically.
+
+Message and constructor argument pairs are:
+	'sequential_threshold <#nr_sequential_ios>' and
+	'random_threshold <#nr_random_ios>'.
+
+The sequential threshold indicates the number of contiguous I/Os
+required before a stream is treated as sequential.  The random threshold
+is the number of intervening non-contiguous I/Os that must be seen
+before the stream is treated as random again.
+
+The sequential and random thresholds default to 512 and 4 respectively.
+
+Large, sequential ios are probably better left on the origin device
+since spindles tend to have good bandwidth. The io_tracker counts
+contiguous I/Os to try to spot when the io is in one of these sequential
+modes.
+
+cleaner
+-------
+
+The cleaner writes back all dirty blocks in a cache to decommission it.
+
+Examples
+========
+
+The syntax for a table is:
+	cache <metadata dev> <cache dev> <origin dev> <block size>
+	<#feature_args> [<feature arg>]*
+	<policy> <#policy_args> [<policy arg>]*
+
+The syntax to send a message using the dmsetup command is:
+	dmsetup message <mapped device> 0 sequential_threshold 1024
+	dmsetup message <mapped device> 0 random_threshold 8
+
+Using dmsetup:
+	dmsetup create blah --table "0 268435456 cache /dev/sdb /dev/sdc \
+	    /dev/sdd 512 0 mq 4 sequential_threshold 1024 random_threshold 8"
+	creates a 128GB large mapped device named 'blah' with the
+	sequential threshold set to 1024 and the random_threshold set to 8.

Documentation/device-mapper/cache.txt

@@ -0,0 +1,243 @@
+Introduction
+============
+
+dm-cache is a device mapper target written by Joe Thornber, Heinz
+Mauelshagen, and Mike Snitzer.
+
+It aims to improve performance of a block device (eg, a spindle) by
+dynamically migrating some of its data to a faster, smaller device
+(eg, an SSD).
+
+This device-mapper solution allows us to insert this caching at
+different levels of the dm stack, for instance above the data device for
+a thin-provisioning pool.  Caching solutions that are integrated more
+closely with the virtual memory system should give better performance.
+
+The target reuses the metadata library used in the thin-provisioning
+library.
+
+The decision as to what data to migrate and when is left to a plug-in
+policy module.  Several of these have been written as we experiment,
+and we hope other people will contribute others for specific io
+scenarios (eg. a vm image server).
+
+Glossary
+========
+
+  Migration -  Movement of the primary copy of a logical block from one
+	       device to the other.
+  Promotion -  Migration from slow device to fast device.
+  Demotion  -  Migration from fast device to slow device.
+
+The origin device always contains a copy of the logical block, which
+may be out of date or kept in sync with the copy on the cache device
+(depending on policy).
+
+Design
+======
+
+Sub-devices
+-----------
+
+The target is constructed by passing three devices to it (along with
+other parameters detailed later):
+
+1. An origin device - the big, slow one.
+
+2. A cache device - the small, fast one.
+
+3. A small metadata device - records which blocks are in the cache,
+   which are dirty, and extra hints for use by the policy object.
+   This information could be put on the cache device, but having it
+   separate allows the volume manager to configure it differently,
+   e.g. as a mirror for extra robustness.
+
+Fixed block size
+----------------
+
+The origin is divided up into blocks of a fixed size.  This block size
+is configurable when you first create the cache.  Typically we've been
+using block sizes of 256k - 1024k.
+
+Having a fixed block size simplifies the target a lot.  But it is
+something of a compromise.  For instance, a small part of a block may be
+getting hit a lot, yet the whole block will be promoted to the cache.
+So large block sizes are bad because they waste cache space.  And small
+block sizes are bad because they increase the amount of metadata (both
+in core and on disk).
+
+Writeback/writethrough
+----------------------
+
+The cache has two modes, writeback and writethrough.
+
+If writeback, the default, is selected then a write to a block that is
+cached will go only to the cache and the block will be marked dirty in
+the metadata.
+
+If writethrough is selected then a write to a cached block will not
+complete until it has hit both the origin and cache devices.  Clean
+blocks should remain clean.
+
+A simple cleaner policy is provided, which will clean (write back) all
+dirty blocks in a cache.  Useful for decommissioning a cache.
+
+Migration throttling
+--------------------
+
+Migrating data between the origin and cache device uses bandwidth.
+The user can set a throttle to prevent more than a certain amount of
+migration occuring at any one time.  Currently we're not taking any
+account of normal io traffic going to the devices.  More work needs
+doing here to avoid migrating during those peak io moments.
+
+For the time being, a message "migration_threshold <#sectors>"
+can be used to set the maximum number of sectors being migrated,
+the default being 204800 sectors (or 100MB).
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a REQ_SYNC or REQ_FUA bio is
+written.  If no such requests are made then commits will occur every
+second.  This means the cache behaves like a physical disk that has a
+write cache (the same is true of the thin-provisioning target).  If
+power is lost you may lose some recent writes.  The metadata should
+always be consistent in spite of any crash.
+
+The 'dirty' state for a cache block changes far too frequently for us
+to keep updating it on the fly.  So we treat it as a hint.  In normal
+operation it will be written when the dm device is suspended.  If the
+system crashes all cache blocks will be assumed dirty when restarted.
+
+Per-block policy hints
+----------------------
+
+Policy plug-ins can store a chunk of data per cache block.  It's up to
+the policy how big this chunk is, but it should be kept small.  Like the
+dirty flags this data is lost if there's a crash so a safe fallback
+value should always be possible.
+
+For instance, the 'mq' policy, which is currently the default policy,
+uses this facility to store the hit count of the cache blocks.  If
+there's a crash this information will be lost, which means the cache
+may be less efficient until those hit counts are regenerated.
+
+Policy hints affect performance, not correctness.
+
+Policy messaging
+----------------
+
+Policies will have different tunables, specific to each one, so we
+need a generic way of getting and setting these.  Device-mapper
+messages are used.  Refer to cache-policies.txt.
+
+Discard bitset resolution
+-------------------------
+
+We can avoid copying data during migration if we know the block has
+been discarded.  A prime example of this is when mkfs discards the
+whole block device.  We store a bitset tracking the discard state of
+blocks.  However, we allow this bitset to have a different block size
+from the cache blocks.  This is because we need to track the discard
+state for all of the origin device (compare with the dirty bitset
+which is just for the smaller cache device).
+
+Target interface
+================
+
+Constructor
+-----------
+
+ cache <metadata dev> <cache dev> <origin dev> <block size>
+       <#feature args> [<feature arg>]*
+       <policy> <#policy args> [policy args]*
+
+ metadata dev    : fast device holding the persistent metadata
+ cache dev	 : fast device holding cached data blocks
+ origin dev	 : slow device holding original data blocks
+ block size      : cache unit size in sectors
+
+ #feature args   : number of feature arguments passed
+ feature args    : writethrough.  (The default is writeback.)
+
+ policy          : the replacement policy to use
+ #policy args    : an even number of arguments corresponding to
+                   key/value pairs passed to the policy
+ policy args     : key/value pairs passed to the policy
+		   E.g. 'sequential_threshold 1024'
+		   See cache-policies.txt for details.
+
+Optional feature arguments are:
+   writethrough  : write through caching that prohibits cache block
+		   content from being different from origin block content.
+		   Without this argument, the default behaviour is to write
+		   back cache block contents later for performance reasons,
+		   so they may differ from the corresponding origin blocks.
+
+A policy called 'default' is always registered.  This is an alias for
+the policy we currently think is giving best all round performance.
+
+As the default policy could vary between kernels, if you are relying on
+the characteristics of a specific policy, always request it by name.
+
+Status
+------
+
+<#used metadata blocks>/<#total metadata blocks> <#read hits> <#read misses>
+<#write hits> <#write misses> <#demotions> <#promotions> <#blocks in cache>
+<#dirty> <#features> <features>* <#core args> <core args>* <#policy args>
+<policy args>*
+
+#used metadata blocks    : Number of metadata blocks used
+#total metadata blocks   : Total number of metadata blocks
+#read hits               : Number of times a READ bio has been mapped
+			     to the cache
+#read misses             : Number of times a READ bio has been mapped
+			     to the origin
+#write hits              : Number of times a WRITE bio has been mapped
+			     to the cache
+#write misses            : Number of times a WRITE bio has been
+			     mapped to the origin
+#demotions               : Number of times a block has been removed
+			     from the cache
+#promotions              : Number of times a block has been moved to
+			     the cache
+#blocks in cache         : Number of blocks resident in the cache
+#dirty                   : Number of blocks in the cache that differ
+			     from the origin
+#feature args            : Number of feature args to follow
+feature args             : 'writethrough' (optional)
+#core args               : Number of core arguments (must be even)
+core args                : Key/value pairs for tuning the core
+			     e.g. migration_threshold
+#policy args             : Number of policy arguments to follow (must be even)
+policy args              : Key/value pairs
+			     e.g. 'sequential_threshold 1024
+
+Messages
+--------
+
+Policies will have different tunables, specific to each one, so we
+need a generic way of getting and setting these.  Device-mapper
+messages are used.  (A sysfs interface would also be possible.)
+
+The message format is:
+
+   <key> <value>
+
+E.g.
+   dmsetup message my_cache 0 sequential_threshold 1024
+
+Examples
+========
+
+The test suite can be found here:
+
+https://github.com/jthornber/thinp-test-suite
+
+dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
+	/dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0'
+dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
+	/dev/mapper/ssd /dev/mapper/origin 1024 1 writeback \
+	mq 4 sequential_threshold 1024 random_threshold 8'

Documentation/device-mapper/dm-raid.txt

@@ -30,6 +30,7 @@ The target is named "raid" and it accepts the following parameters:
   raid10        Various RAID10 inspired algorithms chosen by additional params
 		- RAID10: Striped Mirrors (aka 'Striping on top of mirrors')
 		- RAID1E: Integrated Adjacent Stripe Mirroring
+		- RAID1E: Integrated Offset Stripe Mirroring
 		-  and other similar RAID10 variants
 
   Reference: Chapter 4 of
@@ -64,15 +65,15 @@ The target is named "raid" and it accepts the following parameters:
 		synchronisation state for each region.
 
         [raid10_copies   <# copies>]
-        [raid10_format   near]
+        [raid10_format   <near|far|offset>]
 		These two options are used to alter the default layout of
 		a RAID10 configuration.  The number of copies is can be
-		specified, but the default is 2.  There are other variations
-		to how the copies are laid down - the default and only current
-		option is "near".  Near copies are what most people think of
-		with respect to mirroring.  If these options are left
-		unspecified, or 'raid10_copies 2' and/or 'raid10_format near'
-		are given, then the layouts for 2, 3 and 4 devices are:
+		specified, but the default is 2.  There are also three
+		variations to how the copies are laid down - the default
+		is "near".  Near copies are what most people think of with
+		respect to mirroring.  If these options are left unspecified,
+		or 'raid10_copies 2' and/or 'raid10_format near' are given,
+		then the layouts for 2, 3 and 4 devices	are:
 		2 drives         3 drives          4 drives
 		--------         ----------        --------------
 		A1  A1           A1  A1  A2        A1  A1  A2  A2
@@ -85,6 +86,33 @@ The target is named "raid" and it accepts the following parameters:
 		3-device layout is what might be called a 'RAID1E - Integrated
 		Adjacent Stripe Mirroring'.
 
+		If 'raid10_copies 2' and 'raid10_format far', then the layouts
+		for 2, 3 and 4 devices are:
+		2 drives             3 drives             4 drives
+		--------             --------------       --------------------
+		A1  A2               A1   A2   A3         A1   A2   A3   A4
+		A3  A4               A4   A5   A6         A5   A6   A7   A8
+		A5  A6               A7   A8   A9         A9   A10  A11  A12
+		..  ..               ..   ..   ..         ..   ..   ..   ..
+		A2  A1               A3   A1   A2         A2   A1   A4   A3
+		A4  A3               A6   A4   A5         A6   A5   A8   A7
+		A6  A5               A9   A7   A8         A10  A9   A12  A11
+		..  ..               ..   ..   ..         ..   ..   ..   ..
+
+		If 'raid10_copies 2' and 'raid10_format offset', then the
+		layouts for 2, 3 and 4 devices are:
+		2 drives       3 drives           4 drives
+		--------       ------------       -----------------
+		A1  A2         A1  A2  A3         A1  A2  A3  A4
+		A2  A1         A3  A1  A2         A2  A1  A4  A3
+		A3  A4         A4  A5  A6         A5  A6  A7  A8
+		A4  A3         A6  A4  A5         A6  A5  A8  A7
+		A5  A6         A7  A8  A9         A9  A10 A11 A12
+		A6  A5         A9  A7  A8         A10 A9  A12 A11
+		..  ..         ..  ..  ..         ..  ..  ..  ..
+		Here we see layouts closely akin to 'RAID1E - Integrated
+		Offset Stripe Mirroring'.
+
 <#raid_devs>: The number of devices composing the array.
 	Each device consists of two entries.  The first is the device
 	containing the metadata (if any); the second is the one containing the
@@ -142,3 +170,5 @@ Version History
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
 1.3.2   Fix/improve redundancy checking for RAID10
+1.4.0	Non-functional change.  Removes arg from mapping function.
+1.4.1   Add RAID10 "far" and "offset" algorithm support.

Documentation/devicetree/bindings/arc/interrupts.txt

@@ -0,0 +1,24 @@
+* ARC700 incore Interrupt Controller
+
+  The core interrupt controller provides 32 prioritised interrupts (2 levels)
+  to ARC700 core.
+
+Properties:
+
+- compatible: "snps,arc700-intc"
+- interrupt-controller: This is an interrupt controller.
+- #interrupt-cells: Must be <1>.
+
+  Single Cell "interrupts" property of a device specifies the IRQ number
+  between 0 to 31
+
+  intc accessed via the special ARC AUX register interface, hence "reg" property
+  is not specified.
+
+Example:
+
+	intc: interrupt-controller {
+		compatible = "snps,arc700-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};

Documentation/devicetree/bindings/arm/armadeus.txt

@@ -0,0 +1,6 @@
+Armadeus i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+APF51: i.MX51 based module.
+Required root node properties:
+    - compatible = "armadeus,imx51-apf51", "fsl,imx51";

Documentation/devicetree/bindings/arm/fsl.txt

@@ -5,6 +5,14 @@ i.MX23 Evaluation Kit
 Required root node properties:
     - compatible = "fsl,imx23-evk", "fsl,imx23";
 
+i.MX25 Product Development Kit
+Required root node properties:
+    - compatible = "fsl,imx25-pdk", "fsl,imx25";
+
+i.MX27 Product Development Kit
+Required root node properties:
+    - compatible = "fsl,imx27-pdk", "fsl,imx27";
+
 i.MX28 Evaluation Kit
 Required root node properties:
     - compatible = "fsl,imx28-evk", "fsl,imx28";

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -171,6 +171,7 @@ clocks and IDs.
 	can_sel			156
 	can1_serial_gate	157
 	can1_ipg_gate		158
+	owire_gate		159
 
 Examples (for mx53):
 

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -203,6 +203,8 @@ clocks and IDs.
 	pcie_ref		188
 	pcie_ref_125m		189
 	enet_ref		190
+	usbphy1_gate		191
+	usbphy2_gate		192
 
 Examples:
 

Documentation/devicetree/bindings/crypto/fsl-sec4.txt

@@ -54,8 +54,13 @@ PROPERTIES
    - compatible
       Usage: required
       Value type: <string>
-      Definition: Must include "fsl,sec-v4.0". Also includes SEC
-           ERA versions (optional) with which the device is compatible.
+      Definition: Must include "fsl,sec-v4.0"
+
+   - fsl,sec-era
+      Usage: optional
+      Value type: <u32>
+      Definition: A standard property. Define the 'ERA' of the SEC
+          device.
 
    - #address-cells
        Usage: required
@@ -107,7 +112,8 @@ PROPERTIES
 
 EXAMPLE
 	crypto@300000 {
-		compatible = "fsl,sec-v4.0", "fsl,sec-era-v2.0";
+		compatible = "fsl,sec-v4.0";
+		fsl,sec-era = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x300000 0x10000>;

Documentation/devicetree/bindings/dma/arm-pl330.txt

@@ -10,7 +10,11 @@ Required properties:
   - interrupts: interrupt number to the cpu.
 
 Optional properties:
-- dma-coherent      : Present if dma operations are coherent
+  - dma-coherent      : Present if dma operations are coherent
+  - #dma-cells: must be <1>. used to represent the number of integer
+    cells in the dmas property of client device.
+  - dma-channels: contains the total number of DMA channels supported by the DMAC
+  - dma-requests: contains the total number of DMA requests supported by the DMAC
 
 Example:
 
@@ -18,16 +22,23 @@ Example:
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x12680000 0x1000>;
 		interrupts = <99>;
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <32>;
 	};
 
 Client drivers (device nodes requiring dma transfers from dev-to-mem or
-mem-to-dev) should specify the DMA channel numbers using a two-value pair
+mem-to-dev) should specify the DMA channel numbers and dma channel names
 as shown below.
 
   [property name]  = <[phandle of the dma controller] [dma request id]>;
+  [property name]  = <[dma channel name]>
 
       where 'dma request id' is the dma request number which is connected
-      to the client controller. The 'property name' is recommended to be
-      of the form <name>-dma-channel.
+      to the client controller. The 'property name' 'dmas' and 'dma-names'
+      as required by the generic dma device tree binding helpers. The dma
+      names correspond 1:1 with the dma request ids in the dmas property.
 
-  Example:  tx-dma-channel = <&pdma0 12>;
+  Example:  dmas = <&pdma0 12
+		    &pdma1 11>;
+	    dma-names = "tx", "rx";

Documentation/devicetree/bindings/dma/dma.txt

@@ -0,0 +1,81 @@
+* Generic DMA Controller and DMA request bindings
+
+Generic binding to provide a way for a driver using DMA Engine to retrieve the
+DMA request or channel information that goes from a hardware device to a DMA
+controller.
+
+
+* DMA controller
+
+Required property:
+- #dma-cells: 		Must be at least 1. Used to provide DMA controller
+			specific information. See DMA client binding below for
+			more details.
+
+Optional properties:
+- dma-channels: 	Number of DMA channels supported by the controller.
+- dma-requests: 	Number of DMA requests signals supported by the
+			controller.
+
+Example:
+
+	dma: dma@48000000 {
+		compatible = "ti,omap-sdma";
+		reg = <0x48000000 0x1000>;
+		interrupts = <0 12 0x4
+			      0 13 0x4
+			      0 14 0x4
+			      0 15 0x4>;
+		#dma-cells = <1>;
+		dma-channels = <32>;
+		dma-requests = <127>;
+	};
+
+
+* DMA client
+
+Client drivers should specify the DMA property using a phandle to the controller
+followed by DMA controller specific data.
+
+Required property:
+- dmas:			List of one or more DMA specifiers, each consisting of
+			- A phandle pointing to DMA controller node
+			- A number of integer cells, as determined by the
+			  #dma-cells property in the node referenced by phandle
+			  containing DMA controller specific information. This
+			  typically contains a DMA request line number or a
+			  channel number, but can contain any data that is used
+			  required for configuring a channel.
+- dma-names: 		Contains one identifier string for each DMA specifier in
+			the dmas property. The specific strings that can be used
+			are defined in the binding of the DMA client device.
+			Multiple DMA specifiers can be used to represent
+			alternatives and in this case the dma-names for those
+			DMA specifiers must be identical (see examples).
+
+Examples:
+
+1. A device with one DMA read channel, one DMA write channel:
+
+	i2c1: i2c@1 {
+		...
+		dmas = <&dma 2		/* read channel */
+			&dma 3>;	/* write channel */
+		dma-names = "rx", "tx";
+		...
+	};
+
+2. A single read-write channel with three alternative DMA controllers:
+
+	dmas = <&dma1 5
+		&dma2 7
+		&dma3 2>;
+	dma-names = "rx-tx", "rx-tx", "rx-tx";
+
+3. A device with three channels, one of which has two alternatives:
+
+	dmas = <&dma1 2			/* read channel */
+		&dma1 3			/* write channel */
+		&dma2 0			/* error read */
+		&dma3 0>;		/* alternative error read */
+	dma-names = "rx", "tx", "error", "error";

Documentation/devicetree/bindings/dma/snps-dma.txt

@@ -3,15 +3,61 @@
 Required properties:
 - compatible: "snps,dma-spear1340"
 - reg: Address range of the DMAC registers
+- interrupt: Should contain the DMAC interrupt number
+- dma-channels: Number of channels supported by hardware
+- dma-requests: Number of DMA request lines supported, up to 16
+- dma-masters: Number of AHB masters supported by the controller
+- #dma-cells: must be <3>
+- chan_allocation_order: order of allocation of channel, 0 (default): ascending,
+  1: descending
+- chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1:
+  increase from chan n->0
+- block_size: Maximum block size supported by the controller
+- data_width: Maximum data width supported by hardware per AHB master
+  (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
+
+
+Optional properties:
 - interrupt-parent: Should be the phandle for the interrupt controller
   that services interrupts for this device
-- interrupt: Should contain the DMAC interrupt number
+- is_private: The device channels should be marked as private and not for by the
+  general purpose DMA channel allocator. False if not passed.
 
 Example:
 
-	dma@fc000000 {
+	dmahost: dma@fc000000 {
 		compatible = "snps,dma-spear1340";
 		reg = <0xfc000000 0x1000>;
 		interrupt-parent = <&vic1>;
 		interrupts = <12>;
+
+		dma-channels = <8>;
+		dma-requests = <16>;
+		dma-masters = <2>;
+		#dma-cells = <3>;
+		chan_allocation_order = <1>;
+		chan_priority = <1>;
+		block_size = <0xfff>;
+		data_width = <3 3 0 0>;
+	};
+
+DMA clients connected to the Designware DMA controller must use the format
+described in the dma.txt file, using a four-cell specifier for each channel.
+The four cells in order are:
+
+1. A phandle pointing to the DMA controller
+2. The DMA request line number
+3. Source master for transfers on allocated channel
+4. Destination master for transfers on allocated channel
+
+Example:
+	
+	serial@e0000000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0xe0000000 0x1000>;
+		interrupts = <0 35 0x4>;
+		status = "disabled";
+		dmas = <&dmahost 12 0 1>,
+			<&dmahost 13 0 1 0>;
+		dma-names = "rx", "rx";
 	};

Documentation/devicetree/bindings/drm/tilcdc/panel.txt

@@ -0,0 +1,59 @@
+Device-Tree bindings for tilcdc DRM generic panel output driver
+
+Required properties:
+ - compatible: value should be "ti,tilcdc,panel".
+ - panel-info: configuration info to configure LCDC correctly for the panel
+   - ac-bias: AC Bias Pin Frequency
+   - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt
+   - dma-burst-sz: DMA burst size
+   - bpp: Bits per pixel
+   - fdd: FIFO DMA Request Delay
+   - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
+   - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore
+   - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
+   - fifo-th: DMA FIFO threshold
+ - display-timings: typical videomode of lcd panel.  Multiple video modes
+   can be listed if the panel supports multiple timings, but the 'native-mode'
+   should be the preferred/default resolution.  Refer to
+   Documentation/devicetree/bindings/video/display-timing.txt for display
+   timing binding details.
+
+Recommended properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure
+   muxing properly for pins that connect to TFP410 device
+
+Example:
+
+	/* Settings for CDTech_S035Q01 / LCD3 cape: */
+	lcd3 {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bone_lcd3_cape_lcd_pins>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 320x240 {
+				hactive         = <320>;
+				vactive         = <240>;
+				hback-porch     = <21>;
+				hfront-porch    = <58>;
+				hsync-len       = <47>;
+				vback-porch     = <11>;
+				vfront-porch    = <23>;
+				vsync-len       = <2>;
+				clock-frequency = <8000000>;
+				hsync-active    = <0>;
+				vsync-active    = <0>;
+			};
+		};
+	};

Documentation/devicetree/bindings/drm/tilcdc/slave.txt

@@ -0,0 +1,18 @@
+Device-Tree bindings for tilcdc DRM encoder slave output driver
+
+Required properties:
+ - compatible: value should be "ti,tilcdc,slave".
+ - i2c: the phandle for the i2c device the encoder slave is connected to
+
+Recommended properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure
+   muxing properly for pins that connect to TFP410 device
+
+Example:
+
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+	};

Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt

@@ -0,0 +1,21 @@
+Device-Tree bindings for tilcdc DRM TFP410 output driver
+
+Required properties:
+ - compatible: value should be "ti,tilcdc,tfp410".
+ - i2c: the phandle for the i2c device to use for DDC
+
+Recommended properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure
+   muxing properly for pins that connect to TFP410 device
+ - powerdn-gpio: the powerdown GPIO, pulled low to power down the
+   TFP410 device (for DPMS_OFF)
+
+Example:
+
+	dvicape {
+		compatible = "ti,tilcdc,tfp410";
+		i2c = <&i2c2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>;
+		powerdn-gpio = <&gpio2 31 0>;
+	};

Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt

@@ -0,0 +1,21 @@
+Device-Tree bindings for tilcdc DRM driver
+
+Required properties:
+ - compatible: value should be "ti,am33xx-tilcdc".
+ - interrupts: the interrupt number
+ - reg: base address and size of the LCDC device
+
+Recommended properties:
+ - interrupt-parent: the phandle for the interrupt controller that
+   services interrupts for this device.
+ - ti,hwmods: Name of the hwmod associated to the LCDC
+
+Example:
+
+	fb: fb@4830e000 {
+		compatible = "ti,am33xx-tilcdc";
+		reg = <0x4830e000 0x1000>;
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+		ti,hwmods = "lcdc";
+	};

Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt

@@ -0,0 +1,20 @@
+Broadcom BCM2835 I2C controller
+
+Required properties:
+- compatible : Should be "brcm,bcm2835-i2c".
+- reg: Should contain register location and length.
+- interrupts: Should contain interrupt.
+- clocks : The clock feeding the I2C controller.
+
+Recommended properties:
+- clock-frequency : desired I2C bus clock frequency in Hz.
+
+Example:
+
+i2c@20205000 {
+	compatible = "brcm,bcm2835-i2c";
+	reg = <0x7e205000 0x1000>;
+	interrupts = <2 21>;
+	clocks = <&clk_i2c>;
+	clock-frequency = <100000>;
+};

Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt

@@ -8,6 +8,8 @@ Required properties:
       (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
       (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
           inside HDMIPHY block found on several samsung SoCs
+      (d) "samsung, exynos5440-i2c", for s3c2440-like i2c used
+	   on EXYNOS5440 which does not need GPIO configuration.
   - reg: physical base address of the controller and length of memory mapped
     region.
   - interrupts: interrupt number to the cpu.

Documentation/devicetree/bindings/leds/leds-pwm.txt

@@ -0,0 +1,48 @@
+LED connected to PWM
+
+Required properties:
+- compatible : should be "pwm-leds".
+
+Each LED is represented as a sub-node of the pwm-leds device.  Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
+  specify the period time to be used: <&phandle id period_ns>;
+- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
+  For the pwms and pwm-names property please refer to:
+  Documentation/devicetree/bindings/pwm/pwm.txt
+- max-brightness : Maximum brightness possible for the LED
+- label :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+twl_pwm: pwm {
+	/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+	compatible = "ti,twl6030-pwm";
+	#pwm-cells = <2>;
+};
+
+twl_pwmled: pwmled {
+	/* provides one PWM (id 0 for Charing indicator LED) */
+	compatible = "ti,twl6030-pwmled";
+	#pwm-cells = <2>;
+};
+
+pwmleds {
+	compatible = "pwm-leds";
+	kpad {
+		label = "omap4::keypad";
+		pwms = <&twl_pwm 0 7812500>;
+		max-brightness = <127>;
+	};
+
+	charging {
+		label = "omap4:green:chrg";
+		pwms = <&twl_pwmled 0 7812500>;
+		max-brightness = <255>;
+	};
+};

Documentation/devicetree/bindings/leds/tca6507.txt

@@ -0,0 +1,33 @@
+LEDs conected to tca6507
+
+Required properties:
+- compatible : should be : "ti,tca6507".
+
+Each led is represented as a sub-node of the ti,tca6507 device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED line (could be from 0 to 6)
+- linux,default-trigger : (optional)
+   see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+
+tca6507@45 {
+	compatible = "ti,tca6507";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x45>;
+
+	led0: red-aux@0 {
+		label = "red:aux";
+		reg = <0x0>;
+	};
+
+	led1: green-aux@1 {
+		label = "green:aux";
+		reg = <0x5>;
+		linux,default-trigger = "default-on";
+	};
+};
+

Documentation/devicetree/bindings/media/gpio-ir-receiver.txt

@@ -0,0 +1,16 @@
+Device-Tree bindings for GPIO IR receiver
+
+Required properties:
+	- compatible: should be "gpio-ir-receiver".
+	- gpios: specifies GPIO used for IR signal reception.
+
+Optional properties:
+	- linux,rc-map-name: Linux specific remote control map name.
+
+Example node:
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 19 1>;
+		linux,rc-map-name = "rc-rc6-mce";
+	};

Documentation/devicetree/bindings/metag/meta-intc.txt

@@ -0,0 +1,82 @@
+* Meta External Trigger Controller Binding
+
+This binding specifies what properties must be available in the device tree
+representation of a Meta external trigger controller.
+
+Required properties:
+
+    - compatible: Specifies the compatibility list for the interrupt controller.
+      The type shall be <string> and the value shall include "img,meta-intc".
+
+    - num-banks: Specifies the number of interrupt banks (each of which can
+      handle 32 interrupt sources).
+
+    - interrupt-controller: The presence of this property identifies the node
+      as an interupt controller. No property value shall be defined.
+
+    - #interrupt-cells: Specifies the number of cells needed to encode an
+      interrupt source. The type shall be a <u32> and the value shall be 2.
+
+    - #address-cells: Specifies the number of cells needed to encode an
+      address. The type shall be <u32> and the value shall be 0. As such,
+      'interrupt-map' nodes do not have to specify a parent unit address.
+
+Optional properties:
+
+    - no-mask: The controller doesn't have any mask registers.
+
+* Interrupt Specifier Definition
+
+  Interrupt specifiers consists of 2 cells encoded as follows:
+
+    - <1st-cell>: The interrupt-number that identifies the interrupt source.
+
+    - <2nd-cell>: The Linux interrupt flags containing level-sense information,
+                  encoded as follows:
+                    1 = edge triggered
+                    4 = level-sensitive
+
+* Examples
+
+Example 1:
+
+	/*
+	 * Meta external trigger block
+	 */
+	intc: intc {
+		// This is an interrupt controller node.
+		interrupt-controller;
+
+		// No address cells so that 'interrupt-map' nodes which
+		// reference this interrupt controller node do not need a parent
+		// address specifier.
+		#address-cells = <0>;
+
+		// Two cells to encode interrupt sources.
+		#interrupt-cells = <2>;
+
+		// Number of interrupt banks
+		num-banks = <2>;
+
+		// No HWMASKEXT is available (specify on Chorus2 and Comet ES1)
+		no-mask;
+
+		// Compatible with Meta hardware trigger block.
+		compatible = "img,meta-intc";
+	};
+
+Example 2:
+
+	/*
+	 * An interrupt generating device that is wired to a Meta external
+	 * trigger block.
+	 */
+	uart1: uart@0x02004c00 {
+		// Interrupt source '5' that is level-sensitive.
+		// Note that there are only two cells as specified in the
+		// interrupt parent's '#interrupt-cells' property.
+		interrupts = <5 4 /* level */>;
+
+		// The interrupt controller that this device is wired to.
+		interrupt-parent = <&intc>;
+	};

Documentation/devicetree/bindings/mfd/max8925.txt

@@ -0,0 +1,64 @@
+* Maxim max8925 Power Management IC
+
+Required parent device properties:
+- compatible : "maxim,max8925"
+- reg : the I2C slave address for the max8925 chip
+- interrupts : IRQ line for the max8925 chip
+- interrupt-controller: describes the max8925 as an interrupt
+  controller (has its own domain)
+- #interrupt-cells : should be 1.
+	- The cell is the max8925 local IRQ number
+
+Optional parent device properties:
+- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in
+  interrupts property, the other is indicated here.
+
+max8925 consists of a large and varied group of sub-devices:
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+max8925-onkey		:		: On key
+max8925-rtc		:		: RTC
+max8925-regulator	:		: Regulators
+max8925-backlight	:		: Backlight
+max8925-touch		:		: Touchscreen
+max8925-power		:		: Charger
+
+Example:
+
+	pmic: max8925@3c {
+		compatible = "maxim,max8925";
+		reg = <0x3c>;
+		interrupts = <1>;
+		interrupt-parent = <&intcmux4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		maxim,tsc-irq = <0>;
+
+		regulators {
+			SDV1 {
+				regulator-min-microvolt = <637500>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+		};
+		backlight {
+			maxim,max8925-dual-string = <0>;
+		};
+		charger {
+			batt-detect = <0>;
+			topoff-threshold = <1>;
+			fast-charge = <7>;
+			no-temp-support = <0>;
+			no-insert-detect = <0>;
+		};
+	};

Documentation/devicetree/bindings/mips/cpu_irq.txt

@@ -0,0 +1,47 @@
+MIPS CPU interrupt controller
+
+On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
+IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+With the irq_domain in place we can describe how the 8 IRQs are wired to the
+platforms internal interrupt controller cascade.
+
+Below is an example of a platform describing the cascade inside the devicetree
+and the code used to load it inside arch_init_irq().
+
+Required properties:
+- compatible : Should be "mti,cpu-interrupt-controller"
+
+Example devicetree:
+	cpu-irq: cpu-irq@0 {
+		#address-cells = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: intc@200 {
+		compatible = "ralink,rt2880-intc";
+		reg = <0x200 0x100>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpu-irq>;
+		interrupts = <2>;
+	};
+
+
+Example platform irq.c:
+static struct of_device_id __initdata of_irq_ids[] = {
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
+	{},
+};
+
+void __init arch_init_irq(void)
+{
+	of_irq_init(of_irq_ids);
+}

Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt

@@ -0,0 +1,18 @@
+Broadcom BCM2835 SDHCI controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the BCM2835 controller.
+
+Required properties:
+- compatible : Should be "brcm,bcm2835-sdhci".
+- clocks : The clock feeding the SDHCI controller.
+
+Example:
+
+sdhci: sdhci {
+	compatible = "brcm,bcm2835-sdhci";
+	reg = <0x7e300000 0x100>;
+	interrupts = <2 30>;
+	clocks = <&clk_mmc>;
+	bus-width = <4>;
+};

Documentation/devicetree/bindings/mmc/mmc.txt

@@ -6,23 +6,45 @@ Interpreted by the OF core:
 - reg: Registers location and length.
 - interrupts: Interrupts used by the MMC controller.
 
-Required properties:
-- bus-width: Number of data lines, can be <1>, <4>, or <8>
-
 Card detection:
-If no property below is supplied, standard SDHCI card detect is used.
+If no property below is supplied, host native card detect is used.
 Only one of the properties in this section should be supplied:
   - broken-cd: There is no card detection available; polling must be used.
   - cd-gpios: Specify GPIOs for card detection, see gpio binding
   - non-removable: non-removable slot (like eMMC); assume always present.
 
 Optional properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>.  The default
+  will be <1> if the property is absent.
 - wp-gpios: Specify GPIOs for write protection, see gpio binding
-- cd-inverted: when present, polarity on the cd gpio line is inverted
-- wp-inverted: when present, polarity on the wp gpio line is inverted
+- cd-inverted: when present, polarity on the CD line is inverted. See the note
+  below for the case, when a GPIO is used for the CD line
+- wp-inverted: when present, polarity on the WP line is inverted. See the note
+  below for the case, when a GPIO is used for the WP line
 - max-frequency: maximum operating clock frequency
 - no-1-8-v: when present, denotes that 1.8v card voltage is not supported on
   this system, even if the controller claims it is.
+- cap-sd-highspeed: SD high-speed timing is supported
+- cap-mmc-highspeed: MMC high-speed timing is supported
+- cap-power-off-card: powering off the card is safe
+- cap-sdio-irq: enable SDIO IRQ signalling on this interface
+
+*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
+polarity properties, we have to fix the meaning of the "normal" and "inverted"
+line levels. We choose to follow the SDHCI standard, which specifies both those
+lines as "active low." Therefore, using the "cd-inverted" property means, that
+the CD line is active high, i.e. it is high, when a card is inserted. Similar
+logic applies to the "wp-inverted" property.
+
+CD and WP lines can be implemented on the hardware in one of two ways: as GPIOs,
+specified in cd-gpios and wp-gpios properties, or as dedicated pins. Polarity of
+dedicated pins can be specified, using *-inverted properties. GPIO polarity can
+also be specified using the OF_GPIO_ACTIVE_LOW flag. This creates an ambiguity
+in the latter case. We choose to use the XOR logic for GPIO CD and WP lines.
+This means, the two properties are "superimposed," for example leaving the
+OF_GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted
+property results in a double-inversion and actually means the "normal" line
+polarity is in effect.
 
 Optional SDIO properties:
 - keep-power-in-suspend: Preserves card power during a suspend/resume cycle

Documentation/devicetree/bindings/mmc/orion-sdio.txt

@@ -0,0 +1,17 @@
+* Marvell orion-sdio controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the orion-sdio driver.
+
+- compatible: Should be "marvell,orion-sdio"
+- clocks: reference to the clock of the SDIO interface
+
+Example:
+
+	mvsdio@d00d4000 {
+		compatible = "marvell,orion-sdio";
+		reg = <0xd00d4000 0x200>;
+		interrupts = <54>;
+		clocks = <&gateclk 17>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt

@@ -26,8 +26,16 @@ Required Properties:
 	* bus-width: as documented in mmc core bindings.
 
 	* wp-gpios: specifies the write protect gpio line. The format of the
-	  gpio specifier depends on the gpio controller. If the write-protect
-	  line is not available, this property is optional.
+	  gpio specifier depends on the gpio controller. If a GPIO is not used
+	  for write-protect, this property is optional.
+
+	* disable-wp: If the wp-gpios property isn't present then (by default)
+	  we'd assume that the write protect is hooked up directly to the
+	  controller's special purpose write protect line (accessible via
+	  the WRTPRT register).  However, it's possible that we simply don't
+	  want write protect.  In that case specify 'disable-wp'.
+	  NOTE: This property is not required for slots known to always
+	  connect to eMMC or SDIO cards.
 
 Optional properties:
 

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

@@ -0,0 +1,20 @@
+* Toshiba Mobile IO SD/MMC controller
+
+The tmio-mmc driver doesn't probe its devices actively, instead its binding to
+devices is managed by either MFD drivers or by the sh_mobile_sdhi platform
+driver. Those drivers supply the tmio-mmc driver with platform data, that either
+describe hardware capabilities, known to them, or are obtained by them from
+their own platform data or from their DT information. In the latter case all
+compulsory and any optional properties, common to all SD/MMC drivers, as
+described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
+optional bindings can be used.
+
+Optional properties:
+- toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
+
+When used with Renesas SDHI hardware, the following compatibility strings
+configure various model-specific properties:
+
+"renesas,sh7372-sdhi":	(default) compatible with SH7372
+"renesas,r8a7740-sdhi":	compatible with R8A7740: certain MMC/SD commands have to
+			wait for the interface to become idle.

Documentation/devicetree/bindings/mtd/elm.txt

@@ -0,0 +1,16 @@
+Error location module
+
+Required properties:
+- compatible: Must be "ti,am33xx-elm"
+- reg: physical base address and size of the registers map.
+- interrupts: Interrupt number for the elm.
+
+Optional properties:
+- ti,hwmods: Name of the hwmod associated to the elm
+
+Example:
+elm: elm@0 {
+	compatible = "ti,am3352-elm";
+	reg = <0x48080000 0x2000>;
+	interrupts = <4>;
+};

Documentation/devicetree/bindings/mtd/mtd-physmap.txt

@@ -26,6 +26,9 @@ file systems on embedded devices.
  - linux,mtd-name: allow to specify the mtd name for retro capability with
    physmap-flash drivers as boot loader pass the mtd partition via the old
    device name physmap-flash.
+ - use-advanced-sector-protection: boolean to enable support for the
+   advanced sector protection (Spansion: PPB - Persistent Protection
+   Bits) locking.
 
 For JEDEC compatible devices, the following additional properties
 are defined:

Documentation/devicetree/bindings/power_supply/max8925_batter.txt

@@ -0,0 +1,18 @@
+max8925-battery bindings
+~~~~~~~~~~~~~~~~
+
+Optional properties :
+ - batt-detect: whether support battery detect
+ - topoff-threshold: set charging current in topoff mode
+ - fast-charge: set charging current in fast mode
+ - no-temp-support: whether support temperature protection detect
+ - no-insert-detect: whether support insert detect
+
+Example:
+	charger {
+		batt-detect = <0>;
+		topoff-threshold = <1>;
+		fast-charge = <7>;
+		no-temp-support = <0>;
+		no-insert-detect = <0>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/guts.txt

@@ -17,9 +17,20 @@ Recommended properties:
    contains a functioning "reset control register" (i.e. the board
    is wired to reset upon setting the HRESET_REQ bit in this register).
 
-Example:
+ - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
+   registers, for those SOCs that have a PAMU device.
+
+Examples:
 	global-utilities@e0000 {	/* global utilities block */
 		compatible = "fsl,mpc8548-guts";
 		reg = <e0000 1000>;
 		fsl,has-rstcr;
 	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/pamu.txt

@@ -0,0 +1,140 @@
+Freescale Peripheral Management Access Unit (PAMU) Device Tree Binding
+
+DESCRIPTION
+
+The PAMU is an I/O MMU that provides device-to-memory access control and
+address translation capabilities.
+
+Required properties:
+
+- compatible	: <string>
+		  First entry is a version-specific string, such as
+		  "fsl,pamu-v1.0".  The second is "fsl,pamu".
+- ranges	: <prop-encoded-array>
+		  A standard property. Utilized to describe the memory mapped
+		  I/O space utilized by the controller.  The size should
+		  be set to the total size of the register space of all
+		  physically present PAMU controllers.  For example, for
+		  PAMU v1.0, on an SOC that has five PAMU devices, the size
+		  is 0x5000.
+- interrupts	: <prop-encoded-array>
+		  Interrupt mappings.  The first tuple is the normal PAMU
+		  interrupt, used for reporting access violations.  The second
+		  is for PAMU hardware errors, such as PAMU operation errors
+		  and ECC errors.
+- #address-cells: <u32>
+		  A standard property.
+- #size-cells	: <u32>
+		  A standard property.
+
+Optional properties:
+- reg		: <prop-encoded-array>
+		  A standard property.   It represents the CCSR registers of
+		  all child PAMUs combined.  Include it to provide support
+		  for legacy drivers.
+- interrupt-parent : <phandle>
+		  Phandle to interrupt controller
+
+Child nodes:
+
+Each child node represents one PAMU controller.  Each SOC device that is
+connected to a specific PAMU device should have a "fsl,pamu-phandle" property
+that links to the corresponding specific child PAMU controller.
+
+- reg		: <prop-encoded-array>
+		  A standard property.  Specifies the physical address and
+		  length (relative to the parent 'ranges' property) of this
+		  PAMU controller's configuration registers.  The size should
+		  be set to the size of this PAMU controllers's register space.
+		  For PAMU v1.0, this size is 0x1000.
+- fsl,primary-cache-geometry
+		: <prop-encoded-array>
+		  Two cells that specify the geometry of the primary PAMU
+		  cache.  The first is the number of cache lines, and the
+		  second is the number of "ways".  For direct-mapped caches,
+		  specify a value of 1.
+- fsl,secondary-cache-geometry
+		: <prop-encoded-array>
+		  Two cells that specify the geometry of the secondary PAMU
+		  cache.  The first is the number of cache lines, and the
+		  second is the number of "ways".  For direct-mapped caches,
+		  specify a value of 1.
+
+Device nodes:
+
+Devices that have LIODNs need to specify links to the parent PAMU controller
+(the actual PAMU controller that this device is connected to) and a pointer to
+the LIODN register, if applicable.
+
+- fsl,iommu-parent
+		: <phandle>
+		Phandle to the single, specific PAMU controller node to which
+		this device is connect.  The PAMU topology is represented in
+		the device tree to assist code that dynamically determines the
+		best LIODN values to minimize PAMU cache thrashing.
+
+- fsl,liodn-reg : <prop-encoded-array>
+		  Two cells that specify the location of the LIODN register
+		  for this device.  Required for devices that have a single
+		  LIODN.  The first cell is a phandle to a node that contains
+		  the registers where the LIODN is to be set.  The second is
+		  the offset from the first "reg" resource of the node where
+		  the specific LIODN register is located.
+
+
+Example:
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>;
+		ranges = <0 0x20000 0x5000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu4: pamu@4000 {
+			reg = <0x4000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};

Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt

@@ -0,0 +1,18 @@
+Atmel TCB PWM controller
+
+Required properties:
+- compatible: should be "atmel,tcb-pwm"
+- #pwm-cells: Should be 3.  The first cell specifies the per-chip index
+  of the PWM to use, the second cell is the period in nanoseconds and
+  bit 0 in the third cell is used to encode the polarity of PWM output.
+  Set bit 0 of the third cell in PWM specifier to 1 for inverse polarity &
+  set to 0 for normal polarity.
+- tc-block: The Timer Counter block to use as a PWM chip.
+
+Example:
+
+pwm {
+	compatible = "atmel,tcb-pwm";
+	#pwm-cells = <3>;
+	tc-block = <1>;
+};

Documentation/devicetree/bindings/pwm/vt8500-pwm.txt

@@ -3,14 +3,17 @@ VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
 Required properties:
 - compatible: should be "via,vt8500-pwm"
 - reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2.  The first cell specifies the per-chip index
-  of the PWM to use and the second cell is the period in nanoseconds.
+- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
+  First cell specifies the per-chip index of the PWM to use, the second
+  cell is the period in nanoseconds and bit 0 in the third cell is used to
+  encode the polarity of PWM output. Set bit 0 of the third in PWM specifier
+  to 1 for inverse polarity & set to 0 for normal polarity.
 - clocks: phandle to the PWM source clock
 
 Example:
 
 pwm1: pwm@d8220000 {
-	#pwm-cells = <2>;
+	#pwm-cells = <3>;
 	compatible = "via,vt8500-pwm";
 	reg = <0xd8220000 0x1000>;
 	clocks = <&clkpwm>;

Documentation/devicetree/bindings/regulator/tps65090.txt

@@ -0,0 +1,122 @@
+TPS65090 regulators
+
+Required properties:
+- compatible: "ti,tps65090"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
+- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
+- infet[1-7]-supply: The input supply for FET[1-7] respectively.
+- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
+
+Optional properties:
+- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
+  If DCDCs are externally controlled then this property should be there.
+- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
+  If DCDCs are externally controlled and if it is from GPIO then GPIO
+  number should be provided. If it is externally controlled and no GPIO
+  entry then driver will just configure this rails as external control
+  and will not provide any enable/disable APIs.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps65090@48 {
+		compatible = "ti,tps65090";
+		reg = <0x48>;
+		interrupts = <0 88 0x4>;
+
+		vsys1-supply = <&some_reg>;
+		vsys2-supply = <&some_reg>;
+		vsys3-supply = <&some_reg>;
+		infet1-supply = <&some_reg>;
+		infet2-supply = <&some_reg>;
+		infet3-supply = <&some_reg>;
+		infet4-supply = <&some_reg>;
+		infet5-supply = <&some_reg>;
+		infet6-supply = <&some_reg>;
+		infet7-supply = <&some_reg>;
+		vsys_l1-supply = <&some_reg>;
+		vsys_l2-supply = <&some_reg>;
+
+		regulators {
+			dcdc1 {
+				regulator-name = "dcdc1";
+				regulator-boot-on;
+				regulator-always-on;
+				ti,enable-ext-control;
+				dcdc-ext-control-gpios = <&gpio 10 0>;
+			};
+
+			dcdc2 {
+				regulator-name = "dcdc2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			dcdc3 {
+				regulator-name = "dcdc3";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet1 {
+				regulator-name = "fet1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet2 {
+				regulator-name = "fet2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet3 {
+				regulator-name = "fet3";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet4 {
+				regulator-name = "fet4";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet5 {
+				regulator-name = "fet5";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet6 {
+				regulator-name = "fet6";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet7 {
+				regulator-name = "fet7";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};

Documentation/devicetree/bindings/serial/lantiq_asc.txt

@@ -0,0 +1,16 @@
+Lantiq SoC ASC serial controller
+
+Required properties:
+- compatible : Should be "lantiq,asc"
+- reg : Address and length of the register set for the device
+- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
+  depends on the interrupt-parent interrupt controller.
+
+Example:
+
+asc1: serial@E100C00 {
+	compatible = "lantiq,asc";
+	reg = <0xE100C00 0x400>;
+	interrupt-parent = <&icu0>;
+	interrupts = <112 113 114>;
+};

Documentation/devicetree/bindings/thermal/dove-thermal.txt

@@ -0,0 +1,18 @@
+* Dove Thermal
+
+This driver is for Dove SoCs which contain a thermal sensor.
+
+Required properties:
+- compatible : "marvell,dove-thermal"
+- reg : Address range of the thermal registers
+
+The reg properties should contain two ranges. The first is for the
+three Thermal Manager registers, while the second range contains the
+Thermal Diode Control Registers.
+
+Example:
+
+	thermal@10078 {
+		compatible = "marvell,dove-thermal";
+		reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+	};

Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt

@@ -0,0 +1,15 @@
+* Kirkwood Thermal
+
+This version is for Kirkwood 88F8262 & 88F6283 SoCs. Other kirkwoods
+don't contain a thermal sensor.
+
+Required properties:
+- compatible : "marvell,kirkwood-thermal"
+- reg : Address range of the thermal registers
+
+Example:
+
+	thermal@10078 {
+		compatible = "marvell,kirkwood-thermal";
+		reg = <0x10078 0x4>;
+	};

Documentation/devicetree/bindings/thermal/rcar-thermal.txt

@@ -0,0 +1,29 @@
+* Renesas R-Car Thermal
+
+Required properties:
+- compatible		: "renesas,rcar-thermal"
+- reg			: Address range of the thermal registers.
+			  The 1st reg will be recognized as common register
+			  if it has "interrupts".
+
+Option properties:
+
+- interrupts		: use interrupt
+
+Example (non interrupt support):
+
+thermal@e61f0100 {
+	compatible = "renesas,rcar-thermal";
+	reg = <0xe61f0100 0x38>;
+};
+
+Example (interrupt support):
+
+thermal@e61f0000 {
+	compatible = "renesas,rcar-thermal";
+	reg = <0xe61f0000 0x14
+		0xe61f0100 0x38
+		0xe61f0200 0x38
+		0xe61f0300 0x38>;
+	interrupts = <0 69 4>;
+};

Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt → Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt

@@ -1,10 +1,13 @@
-Marvell Armada 370 and Armada XP Global Timers
-----------------------------------------------
+Marvell Armada 370 and Armada XP Timers
+---------------------------------------
 
 Required properties:
 - compatible: Should be "marvell,armada-370-xp-timer"
-- interrupts: Should contain the list of Global Timer interrupts
-- reg: Should contain the base address of the Global Timer registers
+- interrupts: Should contain the list of Global Timer interrupts and
+  then local timer interrupts
+- reg: Should contain location and length for timers register. First
+  pair for the Global Timer registers, second pair for the
+  local/private timers.
 - clocks: clock driving the timer hardware
 
 Optional properties:

Documentation/devicetree/bindings/video/backlight/max8925-backlight.txt

@@ -0,0 +1,10 @@
+88pm860x-backlight bindings
+
+Optional properties:
+  - maxim,max8925-dual-string: whether support dual string
+
+Example:
+
+	backlights {
+		maxim,max8925-dual-string = <0>;
+	};

Documentation/devicetree/bindings/video/display-timing.txt

@@ -0,0 +1,109 @@
+display-timing bindings
+=======================
+
+display-timings node
+--------------------
+
+required properties:
+ - none
+
+optional properties:
+ - native-mode: The native mode for the display, in case multiple modes are
+		provided. When omitted, assume the first node is the native.
+
+timing subnode
+--------------
+
+required properties:
+ - hactive, vactive: display resolution
+ - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters
+   in pixels
+   vfront-porch, vback-porch, vsync-len: vertical display timing parameters in
+   lines
+ - clock-frequency: display clock in Hz
+
+optional properties:
+ - hsync-active: hsync pulse is active low/high/ignored
+ - vsync-active: vsync pulse is active low/high/ignored
+ - de-active: data-enable pulse is active low/high/ignored
+ - pixelclk-active: with
+			- active high = drive pixel data on rising edge/
+					sample data on falling edge
+			- active low  = drive pixel data on falling edge/
+					sample data on rising edge
+			- ignored     = ignored
+ - interlaced (bool): boolean to enable interlaced mode
+ - doublescan (bool): boolean to enable doublescan mode
+
+All the optional properties that are not bool follow the following logic:
+    <1>: high active
+    <0>: low active
+    omitted: not used on hardware
+
+There are different ways of describing the capabilities of a display. The
+devicetree representation corresponds to the one commonly found in datasheets
+for displays. If a display supports multiple signal timings, the native-mode
+can be specified.
+
+The parameters are defined as:
+
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vback_porch                 |          |       |
+  |          |        ↓                            |          |       |
+  +----------#######################################----------+-------+
+  |          #        ↑                            #          |       |
+  |          #        |                            #          |       |
+  |  hback   #        |                            #  hfront  | hsync |
+  |   porch  #        |       hactive              #  porch   |  len  |
+  |<-------->#<-------+--------------------------->#<-------->|<----->|
+  |          #        |                            #          |       |
+  |          #        |vactive                     #          |       |
+  |          #        |                            #          |       |
+  |          #        ↓                            #          |       |
+  +----------#######################################----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vfront_porch                |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vsync_len                   |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+
+Example:
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 1080p24 {
+			/* 1920x1080p24 */
+			clock-frequency = <52000000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hfront-porch = <25>;
+			hback-porch = <25>;
+			hsync-len = <25>;
+			vback-porch = <2>;
+			vfront-porch = <2>;
+			vsync-len = <2>;
+			hsync-active = <1>;
+		};
+	};
+
+Every required property also supports the use of ranges, so the commonly used
+datasheet description with minimum, typical and maximum values can be used.
+
+Example:
+
+	timing1: timing {
+		/* 1920x1080p24 */
+		clock-frequency = <148500000>;
+		hactive = <1920>;
+		vactive = <1080>;
+		hsync-len = <0 44 60>;
+		hfront-porch = <80 88 95>;
+		hback-porch = <100 148 160>;
+		vfront-porch = <0 4 6>;
+		vback-porch = <0 36 50>;
+		vsync-len = <0 5 6>;
+	};

Documentation/devicetree/bindings/w1/fsl-imx-owire.txt

@@ -0,0 +1,19 @@
+* Freescale i.MX One wire bus master controller
+
+Required properties:
+- compatible : should be "fsl,imx21-owire"
+- reg : Address and length of the register set for the device
+
+Optional properties:
+- clocks : phandle of clock that supplies the module (required if platform
+		clock bindings use device tree)
+
+Example:
+
+- From imx53.dtsi:
+owire: owire@63fa4000 {
+	compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+	reg = <0x63fa4000 0x4000>;
+	clocks = <&clks 159>;
+	status = "disabled";
+};

Documentation/devicetree/bindings/watchdog/atmel-at91rm9200-wdt.txt

@@ -0,0 +1,9 @@
+Atmel AT91RM9200 System Timer Watchdog
+
+Required properties:
+- compatible: must be "atmel,at91sam9260-wdt".
+
+Example:
+	watchdog@fffffd00 {
+		compatible = "atmel,at91rm9200-wdt";
+	};

Documentation/devicetree/bindings/watchdog/atmel-wdt.txt

@@ -7,9 +7,13 @@ Required properties:
 - reg: physical base address of the controller and length of memory mapped
   region.
 
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
 Example:
 
 	watchdog@fffffd40 {
 		compatible = "atmel,at91sam9260-wdt";
 		reg = <0xfffffd40 0x10>;
+		timeout-sec = <10>;
 	};

Documentation/devicetree/bindings/watchdog/marvel.txt

@@ -5,10 +5,15 @@ Required Properties:
 - Compatibility : "marvell,orion-wdt"
 - reg		: Address of the timer registers
 
+Optional properties:
+
+- timeout-sec	: Contains the watchdog timeout in seconds
+
 Example:
 
 	wdt@20300 {
 		compatible = "marvell,orion-wdt";
 		reg = <0x20300 0x28>;
+		timeout-sec = <10>;
 		status = "okay";
 	};

Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt

@@ -5,9 +5,13 @@ Required properties:
 - reg: physical base address of the controller and length of memory mapped
   region.
 
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
 Example:
 
 	watchdog@4003C000 {
 		compatible = "nxp,pnx4008-wdt";
 		reg = <0x4003C000 0x1000>;
+		timeout-sec = <10>;
 	};

Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt

@@ -0,0 +1,13 @@
+* Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller
+
+Required properties:
+- compatible: must be "qca,ar7130-wdt"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+Example:
+
+wdt@18060008 {
+	compatible = "qca,ar9330-wdt", "qca,ar7130-wdt";
+	reg = <0x18060008 0x8>;
+};

Documentation/devicetree/bindings/watchdog/samsung-wdt.txt

@@ -9,3 +9,6 @@ Required properties:
 - reg : base physical address of the controller and length of memory mapped
 	region.
 - interrupts : interrupt number to the cpu.
+
+Optional properties:
+- timeout-sec : contains the watchdog timeout in seconds.

Documentation/dma-buf-sharing.txt

@@ -302,7 +302,11 @@ Access to a dma_buf from the kernel context involves three steps:
       void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr)
 
    The vmap call can fail if there is no vmap support in the exporter, or if it
-   runs out of vmalloc space. Fallback to kmap should be implemented.
+   runs out of vmalloc space. Fallback to kmap should be implemented. Note that
+   the dma-buf layer keeps a reference count for all vmap access and calls down
+   into the exporter's vmap function only when no vmapping exists, and only
+   unmaps it once. Protection against concurrent vmap/vunmap calls is provided
+   by taking the dma_buf->lock mutex.
 
 3. Finish access
 

Documentation/dvb/get_dvb_firmware

@@ -23,7 +23,7 @@ use IO::Handle;
 
 @components = ( "sp8870", "sp887x", "tda10045", "tda10046",
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
-		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
+		"dec3000s", "vp7041", "vp7049", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
 		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
 		"af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395",
@@ -289,6 +289,19 @@ sub vp7041 {
     $outfile;
 }
 
+sub vp7049 {
+    my $fwfile = "dvb-usb-vp7049-0.95.fw";
+    my $url = "http://ao2.it/sites/default/files/blog/2012/11/06/linux-support-digicom-digitune-s-vp7049-udtt7049/$fwfile";
+    my $hash = "5609fd295168aea88b25ff43a6f79c36";
+
+    checkstandard();
+
+    wgetfile($fwfile, $url);
+    verify($fwfile, $hash);
+
+    $fwfile;
+}
+
 sub dibusb {
 	my $url = "http://www.linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw";
 	my $outfile = "dvb-dibusb-5.0.0.11.fw";
@@ -677,7 +690,7 @@ sub drxk_terratec_h5 {
 }
 
 sub drxk_terratec_htc_stick {
-    my $url = "http://ftp.terratec.de/Receiver/Cinergy_HTC_Stick/Updates/";
+    my $url = "http://ftp.terratec.de/Receiver/Cinergy_HTC_Stick/Updates/History/";
     my $zipfile = "Cinergy_HTC_Stick_Drv_5.09.1202.00_XP_Vista_7.exe";
     my $hash = "6722a2442a05423b781721fbc069ed5e";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);

Documentation/filesystems/Locking

@@ -10,6 +10,7 @@ be able to use diff(1).
 --------------------------- dentry_operations --------------------------
 prototypes:
 	int (*d_revalidate)(struct dentry *, unsigned int);
+	int (*d_weak_revalidate)(struct dentry *, unsigned int);
 	int (*d_hash)(const struct dentry *, const struct inode *,
 			struct qstr *);
 	int (*d_compare)(const struct dentry *, const struct inode *,
@@ -25,6 +26,7 @@ prototypes:
 locking rules:
 		rename_lock	->d_lock	may block	rcu-walk
 d_revalidate:	no		no		yes (ref-walk)	maybe
+d_weak_revalidate:no		no		yes	 	no
 d_hash		no		no		no		maybe
 d_compare:	yes		no		no		maybe
 d_delete:	no		yes		no		no

Documentation/filesystems/porting

@@ -441,3 +441,7 @@ d_make_root() drops the reference to inode if dentry allocation fails.
 two, it gets "is it an O_EXCL or equivalent?" boolean argument.  Note that
 local filesystems can ignore tha argument - they are guaranteed that the
 object doesn't exist.  It's remote/distributed ones that might care...
+--
+[mandatory]
+	FS_REVAL_DOT is gone; if you used to have it, add ->d_weak_revalidate()
+in your dentry operations instead.

Documentation/filesystems/vfs.txt

@@ -900,6 +900,7 @@ defined:
 
 struct dentry_operations {
 	int (*d_revalidate)(struct dentry *, unsigned int);
+	int (*d_weak_revalidate)(struct dentry *, unsigned int);
 	int (*d_hash)(const struct dentry *, const struct inode *,
 			struct qstr *);
 	int (*d_compare)(const struct dentry *, const struct inode *,
@@ -915,8 +916,13 @@ struct dentry_operations {
 
   d_revalidate: called when the VFS needs to revalidate a dentry. This
 	is called whenever a name look-up finds a dentry in the
-	dcache. Most filesystems leave this as NULL, because all their
-	dentries in the dcache are valid
+	dcache. Most local filesystems leave this as NULL, because all their
+	dentries in the dcache are valid. Network filesystems are different
+	since things can change on the server without the client necessarily
+	being aware of it.
+
+	This function should return a positive value if the dentry is still
+	valid, and zero or a negative error code if it isn't.
 
 	d_revalidate may be called in rcu-walk mode (flags & LOOKUP_RCU).
 	If in rcu-walk mode, the filesystem must revalidate the dentry without
@@ -927,6 +933,20 @@ struct dentry_operations {
 	If a situation is encountered that rcu-walk cannot handle, return
 	-ECHILD and it will be called again in ref-walk mode.
 
+ d_weak_revalidate: called when the VFS needs to revalidate a "jumped" dentry.
+	This is called when a path-walk ends at dentry that was not acquired by
+	doing a lookup in the parent directory. This includes "/", "." and "..",
+	as well as procfs-style symlinks and mountpoint traversal.
+
+	In this case, we are less concerned with whether the dentry is still
+	fully correct, but rather that the inode is still valid. As with
+	d_revalidate, most local filesystems will set this to NULL since their
+	dcache entries are always valid.
+
+	This function has the same return code semantics as d_revalidate.
+
+	d_weak_revalidate is only called after leaving rcu-walk mode.
+
   d_hash: called when the VFS adds a dentry to the hash table. The first
 	dentry passed to d_hash is the parent directory that the name is
 	to be hashed into. The inode is the dentry's inode.

Documentation/hwmon/adm1275

@@ -15,7 +15,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/adt7410

@@ -4,9 +4,14 @@ Kernel driver adt7410
 Supported chips:
   * Analog Devices ADT7410
     Prefix: 'adt7410'
-    Addresses scanned: I2C 0x48 - 0x4B
+    Addresses scanned: None
     Datasheet: Publicly available at the Analog Devices website
                http://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf
+  * Analog Devices ADT7420
+    Prefix: 'adt7420'
+    Addresses scanned: None
+    Datasheet: Publicly available at the Analog Devices website
+               http://www.analog.com/static/imported-files/data_sheets/ADT7420.pdf
 
 Author: Hartmut Knaack <knaack.h@gmx.de>
 
@@ -27,6 +32,10 @@ value per second or even justget one sample on demand for power saving.
 Besides, it can completely power down its ADC, if power management is
 required.
 
+The ADT7420 is register compatible, the only differences being the package,
+a slightly narrower operating temperature range (-40°C to +150°C), and a
+better accuracy (0.25°C instead of 0.50°C.)
+
 Configuration Notes
 -------------------
 

Documentation/hwmon/jc42

@@ -49,7 +49,7 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1f
 
 Author:
-	Guenter Roeck <guenter.roeck@ericsson.com>
+	Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/lineage-pem

@@ -8,7 +8,7 @@ Supported devices:
     Documentation:
         http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/lm25066

@@ -19,7 +19,7 @@ Supported chips:
     Datasheet:
 	http://www.national.com/pf/LM/LM5066.html
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/ltc2978

@@ -5,13 +5,13 @@ Supported chips:
   * Linear Technology LTC2978
     Prefix: 'ltc2978'
     Addresses scanned: -
-    Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
+    Datasheet: http://www.linear.com/product/ltc2978
   * Linear Technology LTC3880
     Prefix: 'ltc3880'
     Addresses scanned: -
-    Datasheet: http://cds.linear.com/docs/Datasheet/3880f.pdf
+    Datasheet: http://www.linear.com/product/ltc3880
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/ltc4261

@@ -8,7 +8,7 @@ Supported chips:
     Datasheet:
         http://cds.linear.com/docs/Datasheet/42612fb.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/max16064

@@ -7,7 +7,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/max16065

@@ -24,7 +24,7 @@ Supported chips:
 	http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf
 
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/max34440

@@ -27,7 +27,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34461.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/max8688

@@ -7,7 +7,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/pmbus

@@ -34,7 +34,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: n.a.
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/smm665

@@ -29,7 +29,7 @@ Supported chips:
       http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf
       http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Module Parameters