Merge tag 'asoc-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.9

A fairly quiet release for ASoC:

- Support for a wider range of hardware in the compressed stream code.
- The ability to mute capture streams as well as playback streams while
  inactive.
- DT support for AK4642, FSI, Samsung I2S and WM8962.
- AC'97 support for Tegra.
- New driver for max98090, replacing the stub which was there.

Due to dependencies we've also got support for asynchronous I/O in regmap
and DTification of DMA support for Samsung platforms (used only by the
I2S driver and SPI) merged here as well.

Documentation/device-mapper/dm-raid.txt

@@ -141,3 +141,4 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
+1.3.2   Fix/improve redundancy checking for RAID10

Documentation/devicetree/bindings/sound/ak4642.txt

@@ -0,0 +1,17 @@
+AK4642 I2C transmitter
+
+This device supports I2C mode only.
+
+Required properties:
+
+  - compatible : "asahi-kasei,ak4642" or "asahi-kasei,ak4643" or "asahi-kasei,ak4648"
+  - reg : The chip select number on the I2C bus
+
+Example:
+
+&i2c {
+	ak4648: ak4648@0x12 {
+		compatible = "asahi-kasei,ak4642";
+		reg = <0x12>;
+	};
+};

Documentation/devicetree/bindings/sound/cs4271.txt

@@ -20,6 +20,18 @@ Optional properties:
 		!RESET pin
  - cirrus,amuteb-eq-bmutec:	When given, the Codec's AMUTEB=BMUTEC flag
 				is enabled.
+ - cirrus,enable-soft-reset:
+	The CS4271 requires its LRCLK and MCLK to be stable before its RESET
+	line is de-asserted. That also means that clocks cannot be changed
+	without putting the chip back into hardware reset, which also requires
+	a complete re-initialization of all registers.
+
+	One (undocumented) workaround is to assert and de-assert the PDN bit
+	in the MODE2 register. This workaround can be enabled with this DT
+	property.
+
+	Note that this is not needed in case the clocks are stable
+	throughout the entire runtime of the codec.
 
 Examples:
 

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt

@@ -0,0 +1,51 @@
+NVIDIA Tegra audio complex
+
+Required properties:
+- compatible : "nvidia,tegra-audio-wm9712"
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the WM9712's pins, and the jacks on the board:
+
+  WM9712 pins:
+
+  * MONOOUT
+  * HPOUTL
+  * HPOUTR
+  * LOUT2
+  * ROUT2
+  * OUT3
+  * LINEINL
+  * LINEINR
+  * PHONE
+  * PCBEEP
+  * MIC1
+  * MIC2
+  * Mic Bias
+
+  Board connectors:
+
+  * Headphone
+  * LineIn
+  * Mic
+
+- nvidia,ac97-controller : The phandle of the Tegra AC97 controller
+
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+		         "nvidia,tegra-audio-wm9712";
+	nvidia,model = "Toradex Colibri T20";
+
+	nvidia,audio-routing =
+		"Headphone", "HPOUTL",
+		"Headphone", "HPOUTR",
+		"LineIn", "LINEINL",
+		"LineIn", "LINEINR",
+		"Mic", "MIC1";
+
+	nvidia,ac97-controller = <&ac97>;
+};

Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt

@@ -0,0 +1,22 @@
+NVIDIA Tegra 20 AC97 controller
+
+Required properties:
+- compatible : "nvidia,tegra20-ac97"
+- reg : Should contain AC97 controller registers location and length
+- interrupts : Should contain AC97 interrupt
+- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
+  request selector for the AC97 controller
+- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
+  of the GPIO used to reset the external AC97 codec
+- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
+  of the GPIO corresponding with the AC97 DAP _FS line
+Example:
+
+ac97@70002000 {
+	compatible = "nvidia,tegra20-ac97";
+	reg = <0x70002000 0x200>;
+	interrupts = <0 81 0x04>;
+	nvidia,dma-request-selector = <&apbdma 12>;
+	nvidia,codec-reset-gpio = <&gpio 170 0>;
+	nvidia,codec-sync-gpio = <&gpio 120 0>;
+};

Documentation/devicetree/bindings/sound/omap-twl4030.txt

@@ -6,6 +6,52 @@ Required properties:
 - ti,mcbsp: phandle for the McBSP node
 - ti,codec: phandle for the twl4030 audio node
 
+Optional properties:
+- ti,mcbsp-voice: phandle for the McBSP node connected to the voice port of twl
+- ti, jack-det-gpio: Jack detect GPIO
+- ti,audio-routing: List of connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source.
+  If the routing is not provided all possible connection will be available
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headset Stereophone
+ * Earpiece Spk
+ * Handsfree Spk
+ * Ext Spk
+ * Main Mic
+ * Sub Mic
+ * Headset Mic
+ * Carkit Mic
+ * Digital0 Mic
+ * Digital1 Mic
+ * Line In
+
+twl4030 pins:
+ * HSOL
+ * HSOR
+ * EARPIECE
+ * HFL
+ * HFR
+ * PREDRIVEL
+ * PREDRIVER
+ * CARKITL
+ * CARKITR
+ * MAINMIC
+ * SUBMIC
+ * HSMIC
+ * DIGIMIC0
+ * DIGIMIC1
+ * CARKITMIC
+ * AUXL
+ * AUXR
+
+ * Headset Mic Bias
+ * Mic Bias 1 /* Used for Main Mic or Digimic0 */
+ * Mic Bias 2 /* Used for Sub Mic or Digimic1 */
+
 Example:
 
 sound {

Documentation/devicetree/bindings/sound/renesas,fsi.txt

@@ -0,0 +1,26 @@
+Renesas FSI
+
+Required properties:
+- compatible			: "renesas,sh_fsi2" or "renesas,sh_fsi"
+- reg				: Should contain the register physical address and length
+- interrupts			: Should contain FSI interrupt
+
+- fsia,spdif-connection		: FSI is connected by S/PDFI
+- fsia,stream-mode-support	: FSI supports 16bit stream mode.
+- fsia,use-internal-clock	: FSI uses internal clock when master mode.
+
+- fsib,spdif-connection		: same as fsia
+- fsib,stream-mode-support	: same as fsia
+- fsib,use-internal-clock	: same as fsia
+
+Example:
+
+sh_fsi2: sh_fsi2@0xec230000 {
+	compatible = "renesas,sh_fsi2";
+	reg = <0xec230000 0x400>;
+	interrupts = <0 146 0x4>;
+
+	fsia,spdif-connection;
+	fsia,stream-mode-support;
+	fsia,use-internal-clock;
+};

Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt

@@ -0,0 +1,14 @@
+Samsung SMDK audio complex
+
+Required properties:
+- compatible : "samsung,smdk-wm8994"
+- samsung,i2s-controller: The phandle of the Samsung I2S0 controller
+- samsung,audio-codec: The phandle of the WM8994 audio codec
+Example:
+
+sound {
+		compatible = "samsung,smdk-wm8994";
+
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&wm8994>;
+};

Documentation/devicetree/bindings/sound/samsung-i2s.txt

@@ -0,0 +1,63 @@
+* Samsung I2S controller
+
+Required SoC Specific Properties:
+
+- compatible : "samsung,i2s-v5"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- dmas: list of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+Optional SoC Specific Properties:
+
+- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel
+  support, this flag is enabled.
+- samsung,supports-rstclr: This flag should be set if I2S software reset bit
+  control is required. When this flag is set I2S software reset bit will be
+  enabled or disabled based on need.
+- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA,
+  then this flag is enabled.
+- samsung,idma-addr: Internal DMA register base address of the audio
+  sub system(used in secondary sound source).
+
+Required Board Specific Properties:
+
+- gpios: The gpio specifier for data out,data in, LRCLK, CDCLK and SCLK
+  interface lines. The format of the gpio specifier depends on the gpio
+  controller.
+  The syntax of samsung gpio specifier is
+	<[phandle of the gpio controller node]
+	 [pin number within the gpio controller]
+	 [mux function]
+	 [flags and pull up/down]
+	 [drive strength]>
+
+Example:
+
+- SoC Specific Portion:
+
+i2s@03830000 {
+	compatible = "samsung,i2s-v5";
+	reg = <0x03830000 0x100>;
+	dmas = <&pdma0 10
+		&pdma0 9
+		&pdma0 8>;
+	dma-names = "tx", "rx", "tx-sec";
+	samsung,supports-6ch;
+	samsung,supports-rstclr;
+	samsung,supports-secdai;
+	samsung,idma-addr = <0x03000000>;
+};
+
+- Board Specific Portion:
+
+i2s@03830000 {
+	gpios = <&gpz 0 2 0 0>, /* I2S_0_SCLK */
+		<&gpz 1 2 0 0>, /* I2S_0_CDCLK */
+		<&gpz 2 2 0 0>, /* I2S_0_LRCK */
+		<&gpz 3 2 0 0>, /* I2S_0_SDI */
+		<&gpz 4 2 0 0>, /* I2S_0_SDO[1] */
+		<&gpz 5 2 0 0>, /* I2S_0_SDO[2] */
+		<&gpz 6 2 0 0>; /* I2S_0_SDO[3] */
+};

Documentation/devicetree/bindings/sound/tlv320aic3x.txt

@@ -11,6 +11,12 @@ Optional properties:
 
 - gpio-reset - gpio pin number used for codec reset
 - ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
+- ai3x-micbias-vg - MicBias Voltage required.
+	1 - MICBIAS output is powered to 2.0V,
+	2 - MICBIAS output is powered to 2.5V,
+	3 - MICBIAS output is connected to AVDD,
+	If this node is not mentioned or if the value is incorrect, then MicBias
+	is powered down.
 
 Example:
 

Documentation/devicetree/bindings/sound/wm8962.txt

@@ -0,0 +1,16 @@
+WM8962 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "wlf,wm8962"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: wm8962@1a {
+	compatible = "wlf,wm8962";
+	reg = <0x1a>;
+};

Documentation/hid/hid-sensor.txt

@@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			real-time workloads.  It can also improve energy
 			efficiency for asymmetric multiprocessors.
 
-	rcu_nocbs_poll	[KNL,BOOT]
+	rcu_nocb_poll	[KNL,BOOT]
 			Rather than requiring that offloaded CPUs
 			(specified by rcu_nocbs= above) explicitly
 			awaken the corresponding "rcuoN" kthreads,

Documentation/x86/boot.txt

@@ -57,6 +57,10 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
+Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
+	 	to struct boot_params for for loading bzImage and ramdisk
+		above 4G in 64bit.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -182,7 +186,7 @@ Offset	Proto	Name		Meaning
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	N/A	pad3		Unused
+0236/2	2.12+	xloadflags	Boot protocol option flags
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -582,6 +586,27 @@ Protocol:	2.10+
   misaligned kernel.  Therefore, a loader should typically try each
   power-of-two alignment from kernel_alignment down to this alignment.
 
+Field name:     xloadflags
+Type:           read
+Offset/size:    0x236/2
+Protocol:       2.12+
+
+  This field is a bitmask.
+
+  Bit 0 (read):	XLF_KERNEL_64
+	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
+
+  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
+        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
+
+  Bit 2 (read):	XLF_EFI_HANDOVER_32
+	- If 1, the kernel supports the 32-bit EFI handoff entry point
+          given at handover_offset.
+
+  Bit 3 (read): XLF_EFI_HANDOVER_64
+	- If 1, the kernel supports the 64-bit EFI handoff entry point
+          given at handover_offset + 0x200.
+
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4

Documentation/x86/zero-page.txt

@@ -19,6 +19,9 @@ Offset	Proto	Name		Meaning
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
 0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
+0C0/004	ALL	ext_ramdisk_image ramdisk_image high 32bits
+0C4/004	ALL	ext_ramdisk_size  ramdisk_size high 32bits
+0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
@@ -27,6 +30,7 @@ Offset	Proto	Name		Meaning
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
 				(below)
+1EF/001	ALL	sentinel	Used to detect broken bootloaders
 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00	ALL	e820_map	E820 memory map table
 				(array of struct e820entry)

MAINTAINERS

@@ -1489,7 +1489,7 @@ AVR32 ARCHITECTURE
 M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:	http://www.atmel.com/products/AVR32/
-W:	http://avr32linux.org/
+W:	http://mirror.egtvedt.no/avr32linux.org/
 W:	http://avrfreaks.net/
 S:	Maintained
 F:	arch/avr32/
@@ -2966,7 +2966,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -4905,7 +4905,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -5180,7 +5180,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c

Makefile

@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
-NAME = Terrified Chipmunk
+EXTRAVERSION = -rc7
+NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -49,6 +49,11 @@
 			compatible = "samsung,s524ad0xd1";
 			reg = <0x51>;
 		};
+
+		wm8994: wm8994@1a {
+			 compatible = "wlf,wm8994";
+			 reg = <0x1a>;
+		};
 	};
 
 	i2c@121D0000 {
@@ -204,4 +209,25 @@
 		samsung,mfc-r = <0x43000000 0x800000>;
 		samsung,mfc-l = <0x51000000 0x800000>;
 	};
+
+	i2s0: i2s@03830000 {
+		gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
+			<&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
+			<&gpz 6 2 0 0>;
+	};
+
+	i2s1: i2s@12D60000 {
+		status = "disabled";
+	};
+
+	i2s2: i2s@12D70000 {
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "samsung,smdk-wm8994";
+
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&wm8994>;
+	};
 };

arch/arm/boot/dts/exynos5250.dtsi

@@ -211,8 +211,9 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d20000 0x100>;
 		interrupts = <0 66 0>;
-		tx-dma-channel = <&pdma0 5>; /* preliminary */
-		rx-dma-channel = <&pdma0 4>; /* preliminary */
+		dmas = <&pdma0 5
+			&pdma0 4>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -221,8 +222,9 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d30000 0x100>;
 		interrupts = <0 67 0>;
-		tx-dma-channel = <&pdma1 5>; /* preliminary */
-		rx-dma-channel = <&pdma1 4>; /* preliminary */
+		dmas = <&pdma1 5
+			&pdma1 4>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -231,8 +233,9 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d40000 0x100>;
 		interrupts = <0 68 0>;
-		tx-dma-channel = <&pdma0 7>; /* preliminary */
-		rx-dma-channel = <&pdma0 6>; /* preliminary */
+		dmas = <&pdma0 7
+			&pdma0 6>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -269,6 +272,35 @@
 		#size-cells = <0>;
 	};
 
+	i2s0: i2s@03830000 {
+		compatible = "samsung,i2s-v5";
+		reg = <0x03830000 0x100>;
+		dmas = <&pdma0 10
+			&pdma0 9
+			&pdma0 8>;
+		dma-names = "tx", "rx", "tx-sec";
+		samsung,supports-6ch;
+		samsung,supports-rstclr;
+		samsung,supports-secdai;
+		samsung,idma-addr = <0x03000000>;
+	};
+
+	i2s1: i2s@12D60000 {
+		compatible = "samsung,i2s-v5";
+		reg = <0x12D60000 0x100>;
+		dmas = <&pdma1 12
+			&pdma1 11>;
+		dma-names = "tx", "rx";
+	};
+
+	i2s2: i2s@12D70000 {
+		compatible = "samsung,i2s-v5";
+		reg = <0x12D70000 0x100>;
+		dmas = <&pdma0 12
+			&pdma0 11>;
+		dma-names = "tx", "rx";
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/common/gic.c

@@ -351,6 +351,25 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
 	irq_set_chained_handler(irq, gic_handle_cascade_irq);
 }
 
+static u8 gic_get_cpumask(struct gic_chip_data *gic)
+{
+	void __iomem *base = gic_data_dist_base(gic);
+	u32 mask, i;
+
+	for (i = mask = 0; i < 32; i += 4) {
+		mask = readl_relaxed(base + GIC_DIST_TARGET + i);
+		mask |= mask >> 16;
+		mask |= mask >> 8;
+		if (mask)
+			break;
+	}
+
+	if (!mask)
+		pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
+
+	return mask;
+}
+
 static void __init gic_dist_init(struct gic_chip_data *gic)
 {
 	unsigned int i;
@@ -369,7 +388,9 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
-	cpumask = readl_relaxed(base + GIC_DIST_TARGET + 0);
+	cpumask = gic_get_cpumask(gic);
+	cpumask |= cpumask << 8;
+	cpumask |= cpumask << 16;
 	for (i = 32; i < gic_irqs; i += 4)
 		writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
@@ -400,7 +421,7 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 	 * Get what the GIC says our CPU mask is.
 	 */
 	BUG_ON(cpu >= NR_GIC_CPU_IF);
-	cpu_mask = readl_relaxed(dist_base + GIC_DIST_TARGET + 0);
+	cpu_mask = gic_get_cpumask(gic);
 	gic_cpu_map[cpu] = cpu_mask;
 
 	/*

arch/arm/include/asm/memory.h

@@ -37,7 +37,7 @@
  */
 #define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
-#define TASK_UNMAPPED_BASE	(UL(CONFIG_PAGE_OFFSET) / 3)
+#define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
 
 /*
  * The maximum size of a 26-bit user space task.

arch/arm/mach-exynos/Kconfig

@@ -414,7 +414,7 @@ config MACH_EXYNOS4_DT
 	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
-	select PINCTRL_EXYNOS4
+	select PINCTRL_EXYNOS
 	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -104,6 +104,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
 	OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
 				"exynos-tmu", NULL),
+	OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000,
+				"samsung-i2s.0", NULL),
+	OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000,
+				"samsung-i2s.1", NULL),
+	OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000,
+				"samsung-i2s.2", NULL),
 	{},
 };
 

arch/arm/mach-pxa/pxa27x.c

@@ -53,17 +53,25 @@ static unsigned long ac97_reset_config[] = {
 	GPIO95_AC97_nRESET,
 };
 
-void pxa27x_assert_ac97reset(int reset_gpio, int on)
+void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio)
 {
+	/*
+	 * This helper function is used to work around a bug in the pxa27x's
+	 * ac97 controller during a warm reset.  The configuration of the
+	 * reset_gpio is changed as follows:
+	 * to_gpio == true: configured to generic output gpio and driven high
+	 * to_gpio == false: configured to ac97 controller alt fn AC97_nRESET
+	 */
+
 	if (reset_gpio == 113)
-		pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
-				       &ac97_reset_config[1], 1);
+		pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[0] :
+				  &ac97_reset_config[1], 1);
 
 	if (reset_gpio == 95)
-		pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
-				       &ac97_reset_config[3], 1);
+		pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[2] :
+				  &ac97_reset_config[3], 1);
 }
-EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
+EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
 
 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000

arch/arm/mach-realview/include/mach/irqs-eb.h

@@ -115,7 +115,7 @@
 /*
  * Only define NR_IRQS if less than NR_IRQS_EB
  */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 128)
 
 #if defined(CONFIG_MACH_REALVIEW_EB) \
 	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))

arch/arm/mach-shmobile/board-ap4evb.c

@@ -657,14 +657,8 @@ static struct platform_device lcdc_device = {
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
 static struct sh_fsi_platform_info fsi_info = {
-	.port_a = {
-		.flags		= SH_FSI_BRS_INV,
-	},
 	.port_b = {
-		.flags		= SH_FSI_BRS_INV |
-				  SH_FSI_BRM_INV |
-				  SH_FSI_LRS_INV |
-				  SH_FSI_CLK_CPG |
+		.flags		= SH_FSI_CLK_CPG |
 				  SH_FSI_FMT_SPDIF,
 	},
 };
@@ -692,21 +686,21 @@ static struct platform_device fsi_device = {
 	},
 };
 
-static struct asoc_simple_dai_init_info fsi2_ak4643_init_info = {
-	.fmt		= SND_SOC_DAIFMT_LEFT_J,
-	.codec_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_daifmt	= SND_SOC_DAIFMT_CBS_CFS,
-	.sysclk		= 11289600,
-};
-
 static struct asoc_simple_card_info fsi2_ak4643_info = {
 	.name		= "AK4643",
 	.card		= "FSI2A-AK4643",
-	.cpu_dai	= "fsia-dai",
 	.codec		= "ak4642-codec.0-0013",
 	.platform	= "sh_fsi2",
-	.codec_dai	= "ak4642-hifi",
-	.init		= &fsi2_ak4643_init_info,
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+	.cpu_dai = {
+		.name	= "fsia-dai",
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+		.sysclk	= 11289600,
+	},
 };
 
 static struct platform_device fsi_ak4643_device = {
@@ -815,18 +809,18 @@ static struct platform_device lcdc1_device = {
 	},
 };
 
-static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = {
-	.cpu_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
-};
-
 static struct asoc_simple_card_info fsi2_hdmi_info = {
 	.name		= "HDMI",
 	.card		= "FSI2B-HDMI",
-	.cpu_dai	= "fsib-dai",
 	.codec		= "sh-mobile-hdmi",
 	.platform	= "sh_fsi2",
-	.codec_dai	= "sh_mobile_hdmi-hifi",
-	.init		= &fsi2_hdmi_init_info,
+	.cpu_dai = {
+		.name	= "fsib-dai",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF,
+	},
+	.codec_dai = {
+		.name	= "sh_mobile_hdmi-hifi",
+	},
 };
 
 static struct platform_device fsi_hdmi_device = {

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -806,21 +806,21 @@ static struct platform_device fsi_device = {
 };
 
 /* FSI-WM8978 */
-static struct asoc_simple_dai_init_info fsi_wm8978_init_info = {
-	.fmt		= SND_SOC_DAIFMT_I2S,
-	.codec_daifmt	= SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF,
-	.cpu_daifmt	= SND_SOC_DAIFMT_CBS_CFS,
-	.sysclk		= 12288000,
-};
-
 static struct asoc_simple_card_info fsi_wm8978_info = {
 	.name		= "wm8978",
 	.card		= "FSI2A-WM8978",
-	.cpu_dai	= "fsia-dai",
 	.codec		= "wm8978.0-001a",
 	.platform	= "sh_fsi2",
-	.codec_dai	= "wm8978-hifi",
-	.init		= &fsi_wm8978_init_info,
+	.daifmt		= SND_SOC_DAIFMT_I2S,
+	.cpu_dai = {
+		.name	= "fsia-dai",
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF,
+	},
+	.codec_dai = {
+		.name	= "wm8978-hifi",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF,
+		.sysclk	= 12288000,
+	},
 };
 
 static struct platform_device fsi_wm8978_device = {
@@ -832,18 +832,18 @@ static struct platform_device fsi_wm8978_device = {
 };
 
 /* FSI-HDMI */
-static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = {
-	.cpu_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
-};
-
 static struct asoc_simple_card_info fsi2_hdmi_info = {
 	.name		= "HDMI",
 	.card		= "FSI2B-HDMI",
-	.cpu_dai	= "fsib-dai",
 	.codec		= "sh-mobile-hdmi",
 	.platform	= "sh_fsi2",
-	.codec_dai	= "sh_mobile_hdmi-hifi",
-	.init		= &fsi2_hdmi_init_info,
+	.cpu_dai = {
+		.name	= "fsib-dai",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+	},
+	.codec_dai = {
+		.name = "sh_mobile_hdmi-hifi",
+	},
 };
 
 static struct platform_device fsi_hdmi_device = {

arch/arm/mach-shmobile/board-kzm9g.c

@@ -525,21 +525,21 @@ static struct platform_device fsi_device = {
 	},
 };
 
-static struct asoc_simple_dai_init_info fsi2_ak4648_init_info = {
-	.fmt		= SND_SOC_DAIFMT_LEFT_J,
-	.codec_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_daifmt	= SND_SOC_DAIFMT_CBS_CFS,
-	.sysclk		= 11289600,
-};
-
 static struct asoc_simple_card_info fsi2_ak4648_info = {
 	.name		= "AK4648",
 	.card		= "FSI2A-AK4648",
-	.cpu_dai	= "fsia-dai",
 	.codec		= "ak4642-codec.0-0012",
 	.platform	= "sh_fsi2",
-	.codec_dai	= "ak4642-hifi",
-	.init		= &fsi2_ak4648_init_info,
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+	.cpu_dai = {
+		.name	= "fsia-dai",
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+		.sysclk	= 11289600,
+	},
 };
 
 static struct platform_device fsi_ak4648_device = {

arch/arm/mach-shmobile/board-mackerel.c

@@ -502,18 +502,18 @@ static struct platform_device hdmi_lcdc_device = {
 	},
 };
 
-static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = {
-	.cpu_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
-};
-
 static struct asoc_simple_card_info fsi2_hdmi_info = {
 	.name		= "HDMI",
 	.card		= "FSI2B-HDMI",
-	.cpu_dai	= "fsib-dai",
 	.codec		= "sh-mobile-hdmi",
 	.platform	= "sh_fsi2",
-	.codec_dai	= "sh_mobile_hdmi-hifi",
-	.init		= &fsi2_hdmi_init_info,
+	.cpu_dai = {
+		.name	= "fsib-dai",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF,
+	},
+	.codec_dai = {
+		.name	= "sh_mobile_hdmi-hifi",
+	},
 };
 
 static struct platform_device fsi_hdmi_device = {
@@ -858,16 +858,12 @@ static struct platform_device leds_device = {
 #define IRQ_FSI evt2irq(0x1840)
 static struct sh_fsi_platform_info fsi_info = {
 	.port_a = {
-		.flags = SH_FSI_BRS_INV,
 		.tx_id = SHDMA_SLAVE_FSIA_TX,
 		.rx_id = SHDMA_SLAVE_FSIA_RX,
 	},
 	.port_b = {
-		.flags = SH_FSI_BRS_INV	|
-			SH_FSI_BRM_INV	|
-			SH_FSI_LRS_INV	|
-			SH_FSI_CLK_CPG	|
-			SH_FSI_FMT_SPDIF,
+		.flags = SH_FSI_CLK_CPG	|
+			 SH_FSI_FMT_SPDIF,
 	}
 };
 
@@ -896,21 +892,21 @@ static struct platform_device fsi_device = {
 	},
 };
 
-static struct asoc_simple_dai_init_info fsi2_ak4643_init_info = {
-	.fmt		= SND_SOC_DAIFMT_LEFT_J,
-	.codec_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_daifmt	= SND_SOC_DAIFMT_CBS_CFS,
-	.sysclk		= 11289600,
-};
-
 static struct asoc_simple_card_info fsi2_ak4643_info = {
 	.name		= "AK4643",
 	.card		= "FSI2A-AK4643",
-	.cpu_dai	= "fsia-dai",
 	.codec		= "ak4642-codec.0-0013",
 	.platform	= "sh_fsi2",
-	.codec_dai	= "ak4642-hifi",
-	.init		= &fsi2_ak4643_init_info,
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+	.cpu_dai = {
+		.name	= "fsia-dai",
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+		.sysclk	= 11289600,
+	},
 };
 
 static struct platform_device fsi_ak4643_device = {

arch/arm/mm/dma-mapping.c

@@ -640,7 +640,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 
 	if (is_coherent || nommu())
 		addr = __alloc_simple_buffer(dev, size, gfp, &page);
-	else if (gfp & GFP_ATOMIC)
+	else if (!(gfp & __GFP_WAIT))
 		addr = __alloc_from_pool(size, &page);
 	else if (!IS_ENABLED(CONFIG_CMA))
 		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);

arch/arm/plat-samsung/dma-ops.c

@@ -19,7 +19,8 @@
 #include <mach/dma.h>
 
 static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
-				struct samsung_dma_req *param)
+				struct samsung_dma_req *param,
+				struct device *dev, char *ch_name)
 {
 	dma_cap_mask_t mask;
 	void *filter_param;
@@ -33,7 +34,12 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 	 */
 	filter_param = (dma_ch == DMACH_DT_PROP) ?
 		(void *)param->dt_dmach_prop : (void *)dma_ch;
-	return (unsigned)dma_request_channel(mask, pl330_filter, filter_param);
+
+	if (dev->of_node)
+		return (unsigned)dma_request_slave_channel(dev, ch_name);
+	else
+		return (unsigned)dma_request_channel(mask, pl330_filter,
+							filter_param);
 }
 
 static int samsung_dmadev_release(unsigned ch, void *param)

arch/arm/plat-samsung/include/plat/dma-ops.h

@@ -39,7 +39,8 @@ struct samsung_dma_config {
 };
 
 struct samsung_dma_ops {
-	unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param);
+	unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param,
+				struct device *dev, char *ch_name);
 	int (*release)(unsigned ch, void *param);
 	int (*config)(unsigned ch, struct samsung_dma_config *param);
 	int (*prepare)(unsigned ch, struct samsung_dma_prep *param);

arch/arm/plat-samsung/s3c-dma-ops.c

@@ -36,7 +36,8 @@ static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
 }
 
 static unsigned s3c_dma_request(enum dma_ch dma_ch,
-					struct samsung_dma_req *param)
+				struct samsung_dma_req *param,
+				struct device *dev, char *ch_name)
 {
 	struct cb_data *data;
 

arch/avr32/include/asm/dma-mapping.h

@@ -336,4 +336,14 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 #endif /* __ASM_AVR32_DMA_MAPPING_H */

arch/blackfin/include/asm/dma-mapping.h

@@ -154,4 +154,14 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	_dma_sync((dma_addr_t)vaddr, size, dir);
 }
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 #endif				/* _BLACKFIN_DMA_MAPPING_H */

arch/c6x/include/asm/dma-mapping.h

@@ -89,4 +89,19 @@ extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t);
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
 #define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
 
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+				    struct vm_area_struct *vma, void *cpu_addr,
+				    dma_addr_t dma_addr, size_t size)
+{
+	return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size)
+{
+	return -EINVAL;
+}
+
 #endif	/* _ASM_C6X_DMA_MAPPING_H */

arch/cris/include/asm/dma-mapping.h

@@ -158,5 +158,15 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 {
 }
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 
 #endif

arch/frv/include/asm/dma-mapping.h

@@ -132,4 +132,19 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	flush_write_buffers();
 }
 
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+				    struct vm_area_struct *vma, void *cpu_addr,
+				    dma_addr_t dma_addr, size_t size)
+{
+	return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size)
+{
+	return -EINVAL;
+}
+
 #endif  /* _ASM_DMA_MAPPING_H */

arch/m68k/include/asm/dma-mapping.h

@@ -115,4 +115,14 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
 #include <asm-generic/dma-mapping-broken.h>
 #endif
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 #endif  /* _M68K_DMA_MAPPING_H */

arch/mips/bcm47xx/Kconfig

@@ -8,8 +8,10 @@ config BCM47XX_SSB
 	select SSB_DRIVER_EXTIF
 	select SSB_EMBEDDED
 	select SSB_B43_PCI_BRIDGE if PCI
+	select SSB_DRIVER_PCICORE if PCI
 	select SSB_PCICORE_HOSTMODE if PCI
 	select SSB_DRIVER_GPIO
+	select GPIOLIB
 	default y
 	help
 	 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -25,6 +27,7 @@ config BCM47XX_BCMA
 	select BCMA_HOST_PCI if PCI
 	select BCMA_DRIVER_PCI_HOSTMODE if PCI
 	select BCMA_DRIVER_GPIO
+	select GPIOLIB
 	default y
 	help
 	 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.

arch/mips/cavium-octeon/executive/cvmx-l2c.c

@@ -30,6 +30,7 @@
  * measurement, and debugging facilities.
  */
 
+#include <linux/compiler.h>
 #include <linux/irqflags.h>
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-l2c.h>
@@ -285,22 +286,22 @@ uint64_t cvmx_l2c_read_perf(uint32_t counter)
  */
 static void fault_in(uint64_t addr, int len)
 {
-	volatile char *ptr;
-	volatile char dummy;
+	char *ptr;
+
 	/*
 	 * Adjust addr and length so we get all cache lines even for
 	 * small ranges spanning two cache lines.
 	 */
 	len += addr & CVMX_CACHE_LINE_MASK;
 	addr &= ~CVMX_CACHE_LINE_MASK;
-	ptr = (volatile char *)cvmx_phys_to_ptr(addr);
+	ptr = cvmx_phys_to_ptr(addr);
 	/*
 	 * Invalidate L1 cache to make sure all loads result in data
 	 * being in L2.
 	 */
 	CVMX_DCACHE_INVALIDATE;
 	while (len > 0) {
-		dummy += *ptr;
+		ACCESS_ONCE(*ptr);
 		len -= CVMX_CACHE_LINE_SIZE;
 		ptr += CVMX_CACHE_LINE_SIZE;
 	}

arch/mips/include/asm/dsp.h

@@ -16,7 +16,7 @@
 #include <asm/mipsregs.h>
 
 #define DSP_DEFAULT	0x00000000
-#define DSP_MASK	0x3ff
+#define DSP_MASK	0x3f
 
 #define __enable_dsp_hazard()						\
 do {									\

arch/mips/include/asm/inst.h

@@ -353,6 +353,7 @@ union mips_instruction {
 	struct u_format u_format;
 	struct c_format c_format;
 	struct r_format r_format;
+	struct p_format p_format;
 	struct f_format f_format;
 	struct ma_format ma_format;
 	struct b_format b_format;

arch/mips/include/asm/mach-pnx833x/war.h

@@ -21,4 +21,4 @@
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0
 
-#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
+#endif /* __ASM_MIPS_MACH_PNX833X_WAR_H */

arch/mips/include/asm/pgtable-64.h

@@ -230,6 +230,7 @@ static inline void pud_clear(pud_t *pudp)
 #else
 #define pte_pfn(x)		((unsigned long)((x).pte >> _PFN_SHIFT))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
 #endif
 
 #define __pgd_offset(address)	pgd_index(address)

arch/mips/include/uapi/asm/Kbuild

@@ -3,6 +3,7 @@ include include/uapi/asm-generic/Kbuild.asm
 
 header-y += auxvec.h
 header-y += bitsperlong.h
+header-y += break.h
 header-y += byteorder.h
 header-y += cachectl.h
 header-y += errno.h

arch/mips/kernel/ftrace.c

@@ -25,6 +25,12 @@
 #define MCOUNT_OFFSET_INSNS 4
 #endif
 
+/* Arch override because MIPS doesn't need to run this from stop_machine() */
+void arch_ftrace_update_code(int command)
+{
+	ftrace_modify_all_code(command);
+}
+
 /*
  * Check if the address is in kernel space
  *
@@ -89,6 +95,24 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 	return 0;
 }
 
+#ifndef CONFIG_64BIT
+static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1,
+				unsigned int new_code2)
+{
+	int faulted;
+
+	safe_store_code(new_code1, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+	ip += 4;
+	safe_store_code(new_code2, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+	flush_icache_range(ip, ip + 8); /* original ip + 12 */
+	return 0;
+}
+#endif
+
 /*
  * The details about the calling site of mcount on MIPS
  *
@@ -131,8 +155,18 @@ int ftrace_make_nop(struct module *mod,
 	 * needed.
 	 */
 	new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
-
+#ifdef CONFIG_64BIT
 	return ftrace_modify_code(ip, new);
+#else
+	/*
+	 * On 32 bit MIPS platforms, gcc adds a stack adjust
+	 * instruction in the delay slot after the branch to
+	 * mcount and expects mcount to restore the sp on return.
+	 * This is based on a legacy API and does nothing but
+	 * waste instructions so it's being removed at runtime.
+	 */
+	return ftrace_modify_code_2(ip, new, INSN_NOP);
+#endif
 }
 
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)

arch/mips/kernel/mcount.S

@@ -46,9 +46,8 @@
 	PTR_L	a5, PT_R9(sp)
 	PTR_L	a6, PT_R10(sp)
 	PTR_L	a7, PT_R11(sp)
-	PTR_ADDIU	sp, PT_SIZE
 #else
-	PTR_ADDIU	sp, (PT_SIZE + 8)
+	PTR_ADDIU	sp, PT_SIZE
 #endif
 .endm
 
@@ -69,7 +68,9 @@ NESTED(ftrace_caller, PT_SIZE, ra)
 	.globl _mcount
 _mcount:
 	b	ftrace_stub
-	 nop
+	addiu sp,sp,8
+
+	/* When tracing is activated, it calls ftrace_caller+8 (aka here) */
 	lw	t1, function_trace_stop
 	bnez	t1, ftrace_stub
 	 nop

arch/mips/kernel/vpe.c

@@ -705,7 +705,7 @@ static int vpe_run(struct vpe * v)
 
 			printk(KERN_WARNING
 			       "VPE loader: TC %d is already in use.\n",
-                               t->index);
+			       v->tc->index);
 			return -ENOEXEC;
 		}
 	} else {

arch/mips/lantiq/irq.c

@@ -408,7 +408,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 #endif
 
 	/* tell oprofile which irq to use */
-	cp0_perfcount_irq = LTQ_PERF_IRQ;
+	cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
 
 	/*
 	 * if the timer irq is not one of the mips irqs we need to

arch/mips/lib/delay.c

@@ -21,7 +21,7 @@ void __delay(unsigned long loops)
 	"	.set	noreorder				\n"
 	"	.align	3					\n"
 	"1:	bnez	%0, 1b					\n"
-#if __SIZEOF_LONG__ == 4
+#if BITS_PER_LONG == 32
 	"	subu	%0, 1					\n"
 #else
 	"	dsubu	%0, 1					\n"

arch/mips/mm/ioremap.c

@@ -190,9 +190,3 @@ void __iounmap(const volatile void __iomem *addr)
 
 EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(__iounmap);
-
-int __virt_addr_valid(const volatile void *kaddr)
-{
-	return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
-}
-EXPORT_SYMBOL_GPL(__virt_addr_valid);

arch/mips/mm/mmap.c

@@ -192,3 +192,9 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 
 	return ret;
 }
+
+int __virt_addr_valid(const volatile void *kaddr)
+{
+	return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
+}
+EXPORT_SYMBOL_GPL(__virt_addr_valid);

arch/mips/netlogic/xlr/setup.c

@@ -193,8 +193,11 @@ static void nlm_init_node(void)
 
 void __init prom_init(void)
 {
-	int i, *argv, *envp;		/* passed as 32 bit ptrs */
+	int *argv, *envp;		/* passed as 32 bit ptrs */
 	struct psb_info *prom_infop;
+#ifdef CONFIG_SMP
+	int i;
+#endif
 
 	/* truncate to 32 bit and sign extend all args */
 	argv = (int *)(long)(int)fw_arg1;

arch/mips/pci/pci-ar71xx.c

@@ -24,7 +24,7 @@
 #include <asm/mach-ath79/pci.h>
 
 #define AR71XX_PCI_MEM_BASE	0x10000000
-#define AR71XX_PCI_MEM_SIZE	0x08000000
+#define AR71XX_PCI_MEM_SIZE	0x07000000
 
 #define AR71XX_PCI_WIN0_OFFS		0x10000000
 #define AR71XX_PCI_WIN1_OFFS		0x11000000

arch/mips/pci/pci-ar724x.c

@@ -21,7 +21,7 @@
 #define AR724X_PCI_CTRL_SIZE	0x100
 
 #define AR724X_PCI_MEM_BASE	0x10000000
-#define AR724X_PCI_MEM_SIZE	0x08000000
+#define AR724X_PCI_MEM_SIZE	0x04000000
 
 #define AR724X_PCI_REG_RESET		0x18
 #define AR724X_PCI_REG_INT_STATUS	0x4c

arch/mn10300/include/asm/dma-mapping.h

@@ -168,4 +168,19 @@ void dma_cache_sync(void *vaddr, size_t size,
 	mn10300_dcache_flush_inv();
 }
 
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+				    struct vm_area_struct *vma, void *cpu_addr,
+				    dma_addr_t dma_addr, size_t size)
+{
+	return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size)
+{
+	return -EINVAL;
+}
+
 #endif

arch/parisc/include/asm/dma-mapping.h

@@ -238,4 +238,19 @@ void * sba_get_iommu(struct parisc_device *dev);
 /* At the moment, we panic on error for IOMMU resource exaustion */
 #define dma_mapping_error(dev, x)	0
 
+/* This API cannot be supported on PA-RISC */
+static inline int dma_mmap_coherent(struct device *dev,
+				    struct vm_area_struct *vma, void *cpu_addr,
+				    dma_addr_t dma_addr, size_t size)
+{
+	return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size)
+{
+	return -EINVAL;
+}
+
 #endif

arch/powerpc/kernel/entry_32.S

@@ -439,6 +439,8 @@ ret_from_fork:
 ret_from_kernel_thread:
 	REST_NVGPRS(r1)
 	bl	schedule_tail
+	li	r3,0
+	stw	r3,0(r1)
 	mtlr	r14
 	mr	r3,r15
 	PPC440EP_ERR42

arch/powerpc/kernel/entry_64.S

@@ -664,6 +664,19 @@ resume_kernel:
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
+
+	/*
+	 * arch_local_irq_restore() from preempt_schedule_irq above may
+	 * enable hard interrupt but we really should disable interrupts
+	 * when we return from the interrupt, and so that we don't get
+	 * interrupted after loading SRR0/1.
+	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
+	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
+	mtmsrd	r10,1		  /* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
 #endif /* CONFIG_PREEMPT */
 
 	.globl	fast_exc_return_irq

arch/powerpc/kernel/kgdb.c

@@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 static int kgdb_singlestep(struct pt_regs *regs)
 {
 	struct thread_info *thread_info, *exception_thread_info;
-	struct thread_info *backup_current_thread_info = \
-		(struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
+	struct thread_info *backup_current_thread_info;
 
 	if (user_mode(regs))
 		return 0;
 
+	backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
 	/*
 	 * On Book E and perhaps other processors, singlestep is handled on
 	 * the critical exception stack.  This causes current_thread_info()
@@ -185,6 +185,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
 		/* Restore current_thread_info lastly. */
 		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
 
+	kfree(backup_current_thread_info);
 	return 1;
 }
 

arch/powerpc/kernel/time.c

@@ -494,10 +494,15 @@ void timer_interrupt(struct pt_regs * regs)
 	set_dec(DECREMENTER_MAX);
 
 	/* Some implementations of hotplug will get timer interrupts while
-	 * offline, just ignore these
+	 * offline, just ignore these and we also need to set
+	 * decrementers_next_tb as MAX to make sure __check_irq_replay
+	 * don't replay timer interrupt when return, otherwise we'll trap
+	 * here infinitely :(
 	 */
-	if (!cpu_online(smp_processor_id()))
+	if (!cpu_online(smp_processor_id())) {
+		*next_tb = ~(u64)0;
 		return;
+	}
 
 	/* Conditionally hard-enable interrupts now that the DEC has been
 	 * bumped to its maximum value

arch/powerpc/mm/hash_low_64.S

@@ -115,11 +115,13 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	sldi	r29,r5,SID_SHIFT - VPN_SHIFT
 	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
 	or	r29,r28,r29
-
-	/* Calculate hash value for primary slot and store it in r28 */
-	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
-	rldicl	r0,r3,64-12,48		/* (ea >> 12) & 0xffff */
-	xor	r28,r5,r0
+	/*
+	 * Calculate hash value for primary slot and store it in r28
+	 * r3 = va, r5 = vsid
+	 * r0 = (va >> 12) & ((1ul << (28 - 12)) -1)
+	 */
+	rldicl	r0,r3,64-12,48
+	xor	r28,r5,r0		/* hash */
 	b	4f
 
 3:	/* Calc vpn and put it in r29 */
@@ -130,11 +132,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	/*
 	 * calculate hash value for primary slot and
 	 * store it in r28 for 1T segment
+	 * r3 = va, r5 = vsid
 	 */
-	rldic	r28,r5,25,25		/* (vsid << 25) & 0x7fffffffff */
-	clrldi	r5,r5,40		/* vsid & 0xffffff */
-	rldicl	r0,r3,64-12,36		/* (ea >> 12) & 0xfffffff */
-	xor	r28,r28,r5
+	sldi	r28,r5,25		/* vsid << 25 */
+	/* r0 =  (va >> 12) & ((1ul << (40 - 12)) -1) */
+	rldicl	r0,r3,64-12,36
+	xor	r28,r28,r5		/* vsid ^ ( vsid << 25) */
 	xor	r28,r28,r0		/* hash */
 
 	/* Convert linux PTE bits into HW equivalents */
@@ -407,11 +410,13 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	 */
 	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
 	or	r29,r28,r29
-
-	/* Calculate hash value for primary slot and store it in r28 */
-	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
-	rldicl	r0,r3,64-12,48		/* (ea >> 12) & 0xffff */
-	xor	r28,r5,r0
+	/*
+	 * Calculate hash value for primary slot and store it in r28
+	 * r3 = va, r5 = vsid
+	 * r0 = (va >> 12) & ((1ul << (28 - 12)) -1)
+	 */
+	rldicl	r0,r3,64-12,48
+	xor	r28,r5,r0		/* hash */
 	b	4f
 
 3:	/* Calc vpn and put it in r29 */
@@ -426,11 +431,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	/*
 	 * Calculate hash value for primary slot and
 	 * store it in r28  for 1T segment
+	 * r3 = va, r5 = vsid
 	 */
-	rldic	r28,r5,25,25		/* (vsid << 25) & 0x7fffffffff */
-	clrldi	r5,r5,40		/* vsid & 0xffffff */
-	rldicl	r0,r3,64-12,36		/* (ea >> 12) & 0xfffffff */
-	xor	r28,r28,r5
+	sldi	r28,r5,25		/* vsid << 25 */
+	/* r0 = (va >> 12) & ((1ul << (40 - 12)) -1) */
+	rldicl	r0,r3,64-12,36
+	xor	r28,r28,r5		/* vsid ^ ( vsid << 25) */
 	xor	r28,r28,r0		/* hash */
 
 	/* Convert linux PTE bits into HW equivalents */
@@ -752,25 +758,27 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
 	or	r29,r28,r29
 
-	/* Calculate hash value for primary slot and store it in r28 */
-	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
-	rldicl	r0,r3,64-16,52		/* (ea >> 16) & 0xfff */
-	xor	r28,r5,r0
+	/* Calculate hash value for primary slot and store it in r28
+	 * r3 = va, r5 = vsid
+	 * r0 = (va >> 16) & ((1ul << (28 - 16)) -1)
+	 */
+	rldicl	r0,r3,64-16,52
+	xor	r28,r5,r0		/* hash */
 	b	4f
 
 3:	/* Calc vpn and put it in r29 */
 	sldi	r29,r5,SID_SHIFT_1T - VPN_SHIFT
 	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT)
 	or	r29,r28,r29
-
 	/*
 	 * calculate hash value for primary slot and
 	 * store it in r28 for 1T segment
+	 * r3 = va, r5 = vsid
 	 */
-	rldic	r28,r5,25,25		/* (vsid << 25) & 0x7fffffffff */
-	clrldi	r5,r5,40		/* vsid & 0xffffff */
-	rldicl	r0,r3,64-16,40		/* (ea >> 16) & 0xffffff */
-	xor	r28,r28,r5
+	sldi	r28,r5,25		/* vsid << 25 */
+	/* r0 = (va >> 16) & ((1ul << (40 - 16)) -1) */
+	rldicl	r0,r3,64-16,40
+	xor	r28,r28,r5		/* vsid ^ ( vsid << 25) */
 	xor	r28,r28,r0		/* hash */
 
 	/* Convert linux PTE bits into HW equivalents */

arch/powerpc/oprofile/op_model_power4.c

@@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1)
 	for (pmc = 0; pmc < 4; pmc++) {
 		psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
 				<< (OPROFILE_MAX_PMC_NUM - pmc)
-				* OPROFILE_MAX_PMC_NUM);
+				* OPROFILE_PMSEL_FIELD_WIDTH);
 		psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
 				 * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
 		unit = mmcr1 & (OPROFILE_PM_UNIT_MSK

arch/powerpc/platforms/pasemi/cpufreq.c

@@ -236,6 +236,13 @@ out:
 
 static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
+	/*
+	 * We don't support CPU hotplug. Don't unmap after the system
+	 * has already made it to a running state.
+	 */
+	if (system_state != SYSTEM_BOOTING)
+		return 0;
+
 	if (sdcasr_mapbase)
 		iounmap(sdcasr_mapbase);
 	if (sdcpwr_mapbase)

arch/s390/include/asm/pgtable.h

@@ -1365,6 +1365,18 @@ static inline void pmdp_invalidate(struct vm_area_struct *vma,
 	__pmd_idte(address, pmdp);
 }
 
+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+				      unsigned long address, pmd_t *pmdp)
+{
+	pmd_t pmd = *pmdp;
+
+	if (pmd_write(pmd)) {
+		__pmd_idte(address, pmdp);
+		set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd));
+	}
+}
+
 static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot)
 {
 	pmd_t __pmd;

arch/sh/boards/mach-ecovec24/setup.c

@@ -887,12 +887,6 @@ static struct platform_device camera_devices[] = {
 };
 
 /* FSI */
-static struct sh_fsi_platform_info fsi_info = {
-	.port_b = {
-		.flags = SH_FSI_BRS_INV,
-	},
-};
-
 static struct resource fsi_resources[] = {
 	[0] = {
 		.name	= "FSI",
@@ -911,25 +905,22 @@ static struct platform_device fsi_device = {
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(fsi_resources),
 	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct asoc_simple_dai_init_info fsi_da7210_init_info = {
-	.fmt		= SND_SOC_DAIFMT_I2S,
-	.codec_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_daifmt	= SND_SOC_DAIFMT_CBS_CFS,
 };
 
 static struct asoc_simple_card_info fsi_da7210_info = {
 	.name		= "DA7210",
 	.card		= "FSIB-DA7210",
-	.cpu_dai	= "fsib-dai",
 	.codec		= "da7210.0-001a",
 	.platform	= "sh_fsi.0",
-	.codec_dai	= "da7210-hifi",
-	.init		= &fsi_da7210_init_info,
+	.daifmt		= SND_SOC_DAIFMT_I2S,
+	.cpu_dai = {
+		.name	= "fsib-dai",
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF,
+	},
+	.codec_dai = {
+		.name	= "da7210-hifi",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+	},
 };
 
 static struct platform_device fsi_da7210_device = {

arch/sh/boards/mach-se/7724/setup.c

@@ -279,12 +279,6 @@ static struct platform_device ceu1_device = {
 
 /* FSI */
 /* change J20, J21, J22 pin to 1-2 connection to use slave mode */
-static struct sh_fsi_platform_info fsi_info = {
-	.port_a = {
-		.flags = SH_FSI_BRS_INV,
-	},
-};
-
 static struct resource fsi_resources[] = {
 	[0] = {
 		.name	= "FSI",
@@ -303,26 +297,23 @@ static struct platform_device fsi_device = {
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(fsi_resources),
 	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct asoc_simple_dai_init_info fsi2_ak4642_init_info = {
-	.fmt		= SND_SOC_DAIFMT_LEFT_J,
-	.codec_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_daifmt	= SND_SOC_DAIFMT_CBS_CFS,
-	.sysclk		= 11289600,
 };
 
 static struct asoc_simple_card_info fsi_ak4642_info = {
 	.name		= "AK4642",
 	.card		= "FSIA-AK4642",
-	.cpu_dai	= "fsia-dai",
 	.codec		= "ak4642-codec.0-0012",
 	.platform	= "sh_fsi.0",
-	.codec_dai	= "ak4642-hifi",
-	.init		= &fsi2_ak4642_init_info,
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+	.cpu_dai = {
+		.name	= "fsia-dai",
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF,
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+		.sysclk	= 11289600,
+	},
 };
 
 static struct platform_device fsi_ak4642_device = {

arch/x86/Kconfig

@@ -2138,6 +2138,7 @@ config OLPC_XO1_RTC
 config OLPC_XO1_SCI
 	bool "OLPC XO-1 SCI extras"
 	depends on OLPC && OLPC_XO1_PM
+	depends on INPUT=y
 	select POWER_SUPPLY
 	select GPIO_CS5535
 	select MFD_CORE

arch/x86/boot/Makefile

@@ -71,7 +71,7 @@ GCOV_PROFILE := n
 $(obj)/bzImage: asflags-y  := $(SVGA_MODE)
 
 quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@
+cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@
 
 $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
 	$(call if_changed,image)
@@ -92,7 +92,7 @@ targets += voffset.h
 $(obj)/voffset.h: vmlinux FORCE
 	$(call if_changed,voffset)
 
-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
 
 quiet_cmd_zoffset = ZOFFSET $@
       cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@

arch/x86/boot/compressed/eboot.c

@@ -256,10 +256,10 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
 	int i;
 	struct setup_data *data;
 
-	data = (struct setup_data *)params->hdr.setup_data;
+	data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
 
 	while (data && data->next)
-		data = (struct setup_data *)data->next;
+		data = (struct setup_data *)(unsigned long)data->next;
 
 	status = efi_call_phys5(sys_table->boottime->locate_handle,
 				EFI_LOCATE_BY_PROTOCOL, &pci_proto,
@@ -295,16 +295,18 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
 		if (!pci)
 			continue;
 
+#ifdef CONFIG_X86_64
 		status = efi_call_phys4(pci->attributes, pci,
 					EfiPciIoAttributeOperationGet, 0,
 					&attributes);
-
+#else
+		status = efi_call_phys5(pci->attributes, pci,
+					EfiPciIoAttributeOperationGet, 0, 0,
+					&attributes);
+#endif
 		if (status != EFI_SUCCESS)
 			continue;
 
-		if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM))
-			continue;
-
 		if (!pci->romimage || !pci->romsize)
 			continue;
 
@@ -345,9 +347,9 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
 		memcpy(rom->romdata, pci->romimage, pci->romsize);
 
 		if (data)
-			data->next = (uint64_t)rom;
+			data->next = (unsigned long)rom;
 		else
-			params->hdr.setup_data = (uint64_t)rom;
+			params->hdr.setup_data = (unsigned long)rom;
 
 		data = (struct setup_data *)rom;
 
@@ -432,10 +434,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
 			 * Once we've found a GOP supporting ConOut,
 			 * don't bother looking any further.
 			 */
+			first_gop = gop;
 			if (conout_found)
 				break;
-
-			first_gop = gop;
 		}
 	}
 

arch/x86/boot/compressed/head_32.S

@@ -35,11 +35,11 @@ ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB
 	jmp	preferred_addr
 
-	.balign	0x10
 	/*
 	 * We don't need the return address, so set up the stack so
-	 * efi_main() can find its arugments.
+	 * efi_main() can find its arguments.
 	 */
+ENTRY(efi_pe_entry)
 	add	$0x4, %esp
 
 	call	make_boot_params
@@ -50,8 +50,10 @@ ENTRY(startup_32)
 	pushl	%eax
 	pushl	%esi
 	pushl	%ecx
+	sub	$0x4, %esp
 
-	.org 0x30,0x90
+ENTRY(efi_stub_entry)
+	add	$0x4, %esp
 	call	efi_main
 	cmpl	$0, %eax
 	movl	%eax, %esi

arch/x86/boot/compressed/head_64.S

@@ -201,12 +201,12 @@ ENTRY(startup_64)
 	 */
 #ifdef CONFIG_EFI_STUB
 	/*
-	 * The entry point for the PE/COFF executable is 0x210, so only
-	 * legacy boot loaders will execute this jmp.
+	 * The entry point for the PE/COFF executable is efi_pe_entry, so
+	 * only legacy boot loaders will execute this jmp.
 	 */
 	jmp	preferred_addr
 
-	.org 0x210
+ENTRY(efi_pe_entry)
 	mov	%rcx, %rdi
 	mov	%rdx, %rsi
 	pushq	%rdi
@@ -218,7 +218,7 @@ ENTRY(startup_64)
 	popq	%rsi
 	popq	%rdi
 
-	.org 0x230,0x90
+ENTRY(efi_stub_entry)
 	call	efi_main
 	movq	%rax,%rsi
 	cmpq	$0,%rax

arch/x86/boot/header.S

@@ -21,6 +21,7 @@
 #include <asm/e820.h>
 #include <asm/page_types.h>
 #include <asm/setup.h>
+#include <asm/bootparam.h>
 #include "boot.h"
 #include "voffset.h"
 #include "zoffset.h"
@@ -255,6 +256,9 @@ section_table:
 	# header, from the old boot sector.
 
 	.section ".header", "a"
+	.globl	sentinel
+sentinel:	.byte 0xff, 0xff        /* Used to detect broken loaders */
+
 	.globl	hdr
 hdr:
 setup_sects:	.byte 0			/* Filled in by build.c */
@@ -279,7 +283,7 @@ _start:
 	# Part 2 of the header, from the old setup.S
 
 		.ascii	"HdrS"		# header signature
-		.word	0x020b		# header version number (>= 0x0105)
+		.word	0x020c		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
@@ -297,13 +301,7 @@ type_of_loader:	.byte	0		# 0 means ancient bootloader, newer
 
 # flags, unused bits must be zero (RFU) bit within loadflags
 loadflags:
-LOADED_HIGH	= 1			# If set, the kernel is loaded high
-CAN_USE_HEAP	= 0x80			# If set, the loader also has set
-					# heap_end_ptr to tell how much
-					# space behind setup.S can be used for
-					# heap purposes.
-					# Only the loader knows what is free
-		.byte	LOADED_HIGH
+		.byte	LOADED_HIGH	# The kernel is to be loaded high
 
 setup_move_size: .word  0x8000		# size to move, when setup is not
 					# loaded at 0x90000. We will move setup
@@ -369,7 +367,23 @@ relocatable_kernel:    .byte 1
 relocatable_kernel:    .byte 0
 #endif
 min_alignment:		.byte MIN_KERNEL_ALIGN_LG2	# minimum alignment
-pad3:			.word 0
+
+xloadflags:
+#ifdef CONFIG_X86_64
+# define XLF0 XLF_KERNEL_64			/* 64-bit kernel */
+#else
+# define XLF0 0
+#endif
+#ifdef CONFIG_EFI_STUB
+# ifdef CONFIG_X86_64
+#  define XLF23 XLF_EFI_HANDOVER_64		/* 64-bit EFI handover ok */
+# else
+#  define XLF23 XLF_EFI_HANDOVER_32		/* 32-bit EFI handover ok */
+# endif
+#else
+# define XLF23 0
+#endif
+			.word XLF0 | XLF23
 
 cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
                                                 #added with boot protocol
@@ -397,8 +411,13 @@ pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr
 #define INIT_SIZE VO_INIT_SIZE
 #endif
 init_size:		.long INIT_SIZE		# kernel initialization size
-handover_offset:	.long 0x30		# offset to the handover
+handover_offset:
+#ifdef CONFIG_EFI_STUB
+  			.long 0x30		# offset to the handover
 						# protocol entry point
+#else
+			.long 0
+#endif
 
 # End of setup header #####################################################
 

arch/x86/boot/setup.ld

@@ -13,7 +13,7 @@ SECTIONS
 	.bstext		: { *(.bstext) }
 	.bsdata		: { *(.bsdata) }
 
-	. = 497;
+	. = 495;
 	.header		: { *(.header) }
 	.entrytext	: { *(.entrytext) }
 	.inittext	: { *(.inittext) }

arch/x86/boot/tools/build.c

@@ -52,6 +52,10 @@ int is_big_kernel;
 
 #define PECOFF_RELOC_RESERVE 0x20
 
+unsigned long efi_stub_entry;
+unsigned long efi_pe_entry;
+unsigned long startup_64;
+
 /*----------------------------------------------------------------------*/
 
 static const u32 crctab32[] = {
@@ -132,7 +136,7 @@ static void die(const char * str, ...)
 
 static void usage(void)
 {
-	die("Usage: build setup system [> image]");
+	die("Usage: build setup system [zoffset.h] [> image]");
 }
 
 #ifdef CONFIG_EFI_STUB
@@ -206,30 +210,54 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz)
 	 */
 	put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]);
 
-#ifdef CONFIG_X86_32
 	/*
-	 * Address of entry point.
-	 *
-	 * The EFI stub entry point is +16 bytes from the start of
-	 * the .text section.
+	 * Address of entry point for PE/COFF executable
 	 */
-	put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]);
-#else
-	/*
-	 * Address of entry point. startup_32 is at the beginning and
-	 * the 64-bit entry point (startup_64) is always 512 bytes
-	 * after. The EFI stub entry point is 16 bytes after that, as
-	 * the first instruction allows legacy loaders to jump over
-	 * the EFI stub initialisation
-	 */
-	put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]);
-#endif /* CONFIG_X86_32 */
+	put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]);
 
 	update_pecoff_section_header(".text", text_start, text_sz);
 }
 
 #endif /* CONFIG_EFI_STUB */
 
+
+/*
+ * Parse zoffset.h and find the entry points. We could just #include zoffset.h
+ * but that would mean tools/build would have to be rebuilt every time. It's
+ * not as if parsing it is hard...
+ */
+#define PARSE_ZOFS(p, sym) do { \
+	if (!strncmp(p, "#define ZO_" #sym " ", 11+sizeof(#sym)))	\
+		sym = strtoul(p + 11 + sizeof(#sym), NULL, 16);		\
+} while (0)
+
+static void parse_zoffset(char *fname)
+{
+	FILE *file;
+	char *p;
+	int c;
+
+	file = fopen(fname, "r");
+	if (!file)
+		die("Unable to open `%s': %m", fname);
+	c = fread(buf, 1, sizeof(buf) - 1, file);
+	if (ferror(file))
+		die("read-error on `zoffset.h'");
+	buf[c] = 0;
+
+	p = (char *)buf;
+
+	while (p && *p) {
+		PARSE_ZOFS(p, efi_stub_entry);
+		PARSE_ZOFS(p, efi_pe_entry);
+		PARSE_ZOFS(p, startup_64);
+
+		p = strchr(p, '\n');
+		while (p && (*p == '\r' || *p == '\n'))
+			p++;
+	}
+}
+
 int main(int argc, char ** argv)
 {
 	unsigned int i, sz, setup_sectors;
@@ -241,7 +269,19 @@ int main(int argc, char ** argv)
 	void *kernel;
 	u32 crc = 0xffffffffUL;
 
-	if (argc != 3)
+	/* Defaults for old kernel */
+#ifdef CONFIG_X86_32
+	efi_pe_entry = 0x10;
+	efi_stub_entry = 0x30;
+#else
+	efi_pe_entry = 0x210;
+	efi_stub_entry = 0x230;
+	startup_64 = 0x200;
+#endif
+
+	if (argc == 4)
+		parse_zoffset(argv[3]);
+	else if (argc != 3)
 		usage();
 
 	/* Copy the setup code */
@@ -299,6 +339,11 @@ int main(int argc, char ** argv)
 
 #ifdef CONFIG_EFI_STUB
 	update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz));
+
+#ifdef CONFIG_X86_64 /* Yes, this is really how we defined it :( */
+	efi_stub_entry -= 0x200;
+#endif
+	put_unaligned_le32(efi_stub_entry, &buf[0x264]);
 #endif
 
 	crc = partial_crc32(buf, i, crc);

arch/x86/ia32/ia32entry.S

@@ -207,7 +207,7 @@ sysexit_from_sys_call:
 	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jnz ia32_ret_from_sys_call
 	TRACE_IRQS_ON
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	movl %eax,%esi		/* second arg, syscall return value */
 	cmpl $-MAX_ERRNO,%eax	/* is it an error ? */
 	jbe 1f
@@ -217,7 +217,7 @@ sysexit_from_sys_call:
 	call __audit_syscall_exit
 	movq RAX-ARGOFFSET(%rsp),%rax	/* reload syscall return value */
 	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jz \exit

arch/x86/include/asm/efi.h

@@ -94,6 +94,7 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
 #endif /* CONFIG_X86_32 */
 
 extern int add_efi_memmap;
+extern unsigned long x86_efi_facility;
 extern void efi_set_executable(efi_memory_desc_t *md, bool executable);
 extern int efi_memblock_x86_reserve_range(void);
 extern void efi_call_phys_prelog(void);

arch/x86/include/asm/uv/uv.h

@@ -16,7 +16,7 @@ extern void uv_system_init(void);
 extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 						 struct mm_struct *mm,
 						 unsigned long start,
-						 unsigned end,
+						 unsigned long end,
 						 unsigned int cpu);
 
 #else	/* X86_UV */

arch/x86/include/uapi/asm/bootparam.h

@@ -1,6 +1,31 @@
 #ifndef _ASM_X86_BOOTPARAM_H
 #define _ASM_X86_BOOTPARAM_H
 
+/* setup_data types */
+#define SETUP_NONE			0
+#define SETUP_E820_EXT			1
+#define SETUP_DTB			2
+#define SETUP_PCI			3
+
+/* ram_size flags */
+#define RAMDISK_IMAGE_START_MASK	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000
+
+/* loadflags */
+#define LOADED_HIGH	(1<<0)
+#define QUIET_FLAG	(1<<5)
+#define KEEP_SEGMENTS	(1<<6)
+#define CAN_USE_HEAP	(1<<7)
+
+/* xloadflags */
+#define XLF_KERNEL_64			(1<<0)
+#define XLF_CAN_BE_LOADED_ABOVE_4G	(1<<1)
+#define XLF_EFI_HANDOVER_32		(1<<2)
+#define XLF_EFI_HANDOVER_64		(1<<3)
+
+#ifndef __ASSEMBLY__
+
 #include <linux/types.h>
 #include <linux/screen_info.h>
 #include <linux/apm_bios.h>
@@ -9,12 +34,6 @@
 #include <asm/ist.h>
 #include <video/edid.h>
 
-/* setup data types */
-#define SETUP_NONE			0
-#define SETUP_E820_EXT			1
-#define SETUP_DTB			2
-#define SETUP_PCI			3
-
 /* extensible setup data list node */
 struct setup_data {
 	__u64 next;
@@ -28,9 +47,6 @@ struct setup_header {
 	__u16	root_flags;
 	__u32	syssize;
 	__u16	ram_size;
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-#define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000
 	__u16	vid_mode;
 	__u16	root_dev;
 	__u16	boot_flag;
@@ -42,10 +58,6 @@ struct setup_header {
 	__u16	kernel_version;
 	__u8	type_of_loader;
 	__u8	loadflags;
-#define LOADED_HIGH	(1<<0)
-#define QUIET_FLAG	(1<<5)
-#define KEEP_SEGMENTS	(1<<6)
-#define CAN_USE_HEAP	(1<<7)
 	__u16	setup_move_size;
 	__u32	code32_start;
 	__u32	ramdisk_image;
@@ -58,7 +70,8 @@ struct setup_header {
 	__u32	initrd_addr_max;
 	__u32	kernel_alignment;
 	__u8	relocatable_kernel;
-	__u8	_pad2[3];
+	__u8	min_alignment;
+	__u16	xloadflags;
 	__u32	cmdline_size;
 	__u32	hardware_subarch;
 	__u64	hardware_subarch_data;
@@ -106,7 +119,10 @@ struct boot_params {
 	__u8  hd1_info[16];	/* obsolete! */		/* 0x090 */
 	struct sys_desc_table sys_desc_table;		/* 0x0a0 */
 	struct olpc_ofw_header olpc_ofw_header;		/* 0x0b0 */
-	__u8  _pad4[128];				/* 0x0c0 */
+	__u32 ext_ramdisk_image;			/* 0x0c0 */
+	__u32 ext_ramdisk_size;				/* 0x0c4 */
+	__u32 ext_cmd_line_ptr;				/* 0x0c8 */
+	__u8  _pad4[116];				/* 0x0cc */
 	struct edid_info edid_info;			/* 0x140 */
 	struct efi_info efi_info;			/* 0x1c0 */
 	__u32 alt_mem_k;				/* 0x1e0 */
@@ -115,7 +131,20 @@ struct boot_params {
 	__u8  eddbuf_entries;				/* 0x1e9 */
 	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
 	__u8  kbd_status;				/* 0x1eb */
-	__u8  _pad6[5];					/* 0x1ec */
+	__u8  _pad5[3];					/* 0x1ec */
+	/*
+	 * The sentinel is set to a nonzero value (0xff) in header.S.
+	 *
+	 * A bootloader is supposed to only take setup_header and put
+	 * it into a clean boot_params buffer. If it turns out that
+	 * it is clumsy or too generous with the buffer, it most
+	 * probably will pick up the sentinel variable too. The fact
+	 * that this variable then is still 0xff will let kernel
+	 * know that some variables in boot_params are invalid and
+	 * kernel should zero out certain portions of boot_params.
+	 */
+	__u8  sentinel;					/* 0x1ef */
+	__u8  _pad6[1];					/* 0x1f0 */
 	struct setup_header hdr;    /* setup header */	/* 0x1f1 */
 	__u8  _pad7[0x290-0x1f1-sizeof(struct setup_header)];
 	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX];	/* 0x290 */
@@ -134,6 +163,6 @@ enum {
 	X86_NR_SUBARCHS,
 };
 
-
+#endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_X86_BOOTPARAM_H */

arch/x86/kernel/cpu/intel_cacheinfo.c

@@ -298,8 +298,7 @@ struct _cache_attr {
 			 unsigned int);
 };
 
-#ifdef CONFIG_AMD_NB
-
+#if defined(CONFIG_AMD_NB) && defined(CONFIG_SYSFS)
 /*
  * L3 cache descriptors
  */
@@ -524,9 +523,9 @@ store_subcaches(struct _cpuid4_info *this_leaf, const char *buf, size_t count,
 static struct _cache_attr subcaches =
 	__ATTR(subcaches, 0644, show_subcaches, store_subcaches);
 
-#else	/* CONFIG_AMD_NB */
+#else
 #define amd_init_l3_cache(x, y)
-#endif /* CONFIG_AMD_NB */
+#endif  /* CONFIG_AMD_NB && CONFIG_SYSFS */
 
 static int
 __cpuinit cpuid4_cache_lookup_regs(int index,

arch/x86/kernel/cpu/perf_event_intel.c

@@ -2019,7 +2019,10 @@ __init int intel_pmu_init(void)
 		break;
 
 	case 28: /* Atom */
-	case 54: /* Cedariew */
+	case 38: /* Lincroft */
+	case 39: /* Penwell */
+	case 53: /* Cloverview */
+	case 54: /* Cedarview */
 		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 
@@ -2084,6 +2087,7 @@ __init int intel_pmu_init(void)
 		pr_cont("SandyBridge events, ");
 		break;
 	case 58: /* IvyBridge */
+	case 62: /* IvyBridge EP */
 		memcpy(hw_cache_event_ids, snb_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs,

arch/x86/kernel/cpu/perf_event_p6.c

@@ -19,7 +19,7 @@ static const u64 p6_perfmon_event_map[] =
 
 };
 
-static __initconst u64 p6_hw_cache_event_ids
+static u64 p6_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =

arch/x86/kernel/entry_64.S

@@ -1781,6 +1781,7 @@ first_nmi:
 	 * Leave room for the "copied" frame
 	 */
 	subq $(5*8), %rsp
+	CFI_ADJUST_CFA_OFFSET 5*8
 
 	/* Copy the stack frame to the Saved frame */
 	.rept 5
@@ -1863,10 +1864,8 @@ end_repeat_nmi:
 nmi_swapgs:
 	SWAPGS_UNSAFE_STACK
 nmi_restore:
-	RESTORE_ALL 8
-
-	/* Pop the extra iret frame */
-	addq $(5*8), %rsp
+	/* Pop the extra iret frame at once */
+	RESTORE_ALL 6*8
 
 	/* Clear the NMI executing stack variable */
 	movq $0, 5*8(%rsp)

arch/x86/kernel/head_32.S

@@ -300,6 +300,12 @@ ENTRY(startup_32_smp)
 	leal -__PAGE_OFFSET(%ecx),%esp
 
 default_entry:
+#define CR0_STATE	(X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
+			 X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
+			 X86_CR0_PG)
+	movl $(CR0_STATE & ~X86_CR0_PG),%eax
+	movl %eax,%cr0
+
 /*
  *	New page tables may be in 4Mbyte page mode and may
  *	be using the global pages. 
@@ -364,8 +370,7 @@ default_entry:
  */
 	movl $pa(initial_page_table), %eax
 	movl %eax,%cr3		/* set the page table pointer.. */
-	movl %cr0,%eax
-	orl  $X86_CR0_PG,%eax
+	movl $CR0_STATE,%eax
 	movl %eax,%cr0		/* ..and set paging (PG) bit */
 	ljmp $__BOOT_CS,$1f	/* Clear prefetch and normalize %eip */
 1:

arch/x86/kernel/msr.c

@@ -174,6 +174,9 @@ static int msr_open(struct inode *inode, struct file *file)
 	unsigned int cpu;
 	struct cpuinfo_x86 *c;
 
+	if (!capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
 	cpu = iminor(file->f_path.dentry->d_inode);
 	if (cpu >= nr_cpu_ids || !cpu_online(cpu))
 		return -ENXIO;	/* No such CPU */

arch/x86/kernel/pci-dma.c

@@ -56,7 +56,7 @@ struct device x86_dma_fallback_dev = {
 EXPORT_SYMBOL(x86_dma_fallback_dev);
 
 /* Number of entries preallocated for DMA-API debugging */
-#define PREALLOC_DMA_DEBUG_ENTRIES       32768
+#define PREALLOC_DMA_DEBUG_ENTRIES       65536
 
 int dma_set_mask(struct device *dev, u64 mask)
 {

arch/x86/kernel/reboot.c

@@ -584,7 +584,7 @@ static void native_machine_emergency_restart(void)
 			break;
 
 		case BOOT_EFI:
-			if (efi_enabled)
+			if (efi_enabled(EFI_RUNTIME_SERVICES))
 				efi.reset_system(reboot_mode ?
 						 EFI_RESET_WARM :
 						 EFI_RESET_COLD,

arch/x86/kernel/setup.c

@@ -807,15 +807,15 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_EFI
 	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
 		     "EL32", 4)) {
-		efi_enabled = 1;
-		efi_64bit = false;
+		set_bit(EFI_BOOT, &x86_efi_facility);
 	} else if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
 		     "EL64", 4)) {
-		efi_enabled = 1;
-		efi_64bit = true;
+		set_bit(EFI_BOOT, &x86_efi_facility);
+		set_bit(EFI_64BIT, &x86_efi_facility);
 	}
-	if (efi_enabled && efi_memblock_x86_reserve_range())
-		efi_enabled = 0;
+
+	if (efi_enabled(EFI_BOOT))
+		efi_memblock_x86_reserve_range();
 #endif
 
 	x86_init.oem.arch_setup();
@@ -888,7 +888,7 @@ void __init setup_arch(char **cmdline_p)
 
 	finish_e820_parsing();
 
-	if (efi_enabled)
+	if (efi_enabled(EFI_BOOT))
 		efi_init();
 
 	dmi_scan_machine();
@@ -971,7 +971,7 @@ void __init setup_arch(char **cmdline_p)
 	 * The EFI specification says that boot service code won't be called
 	 * after ExitBootServices(). This is, in fact, a lie.
 	 */
-	if (efi_enabled)
+	if (efi_enabled(EFI_MEMMAP))
 		efi_reserve_boot_services();
 
 	/* preallocate 4k for mptable mpc */
@@ -1114,7 +1114,7 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
-	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+	if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
 		conswitchp = &vga_con;
 #elif defined(CONFIG_DUMMY_CONSOLE)
 	conswitchp = &dummy_con;
@@ -1131,14 +1131,14 @@ void __init setup_arch(char **cmdline_p)
 	register_refined_jiffies(CLOCK_TICK_RATE);
 
 #ifdef CONFIG_EFI
-	/* Once setup is done above, disable efi_enabled on mismatched
-	 * firmware/kernel archtectures since there is no support for
-	 * runtime services.
+	/* Once setup is done above, unmap the EFI memory map on
+	 * mismatched firmware/kernel archtectures since there is no
+	 * support for runtime services.
 	 */
-	if (efi_enabled && IS_ENABLED(CONFIG_X86_64) != efi_64bit) {
+	if (efi_enabled(EFI_BOOT) &&
+	    IS_ENABLED(CONFIG_X86_64) != efi_enabled(EFI_64BIT)) {
 		pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
 		efi_unmap_memmap();
-		efi_enabled = 0;
 	}
 #endif
 }

arch/x86/platform/efi/efi.c

@@ -51,9 +51,6 @@
 
 #define EFI_DEBUG	1
 
-int efi_enabled;
-EXPORT_SYMBOL(efi_enabled);
-
 struct efi __read_mostly efi = {
 	.mps        = EFI_INVALID_TABLE_ADDR,
 	.acpi       = EFI_INVALID_TABLE_ADDR,
@@ -69,19 +66,28 @@ EXPORT_SYMBOL(efi);
 
 struct efi_memory_map memmap;
 
-bool efi_64bit;
-
 static struct efi efi_phys __initdata;
 static efi_system_table_t efi_systab __initdata;
 
 static inline bool efi_is_native(void)
 {
-	return IS_ENABLED(CONFIG_X86_64) == efi_64bit;
+	return IS_ENABLED(CONFIG_X86_64) == efi_enabled(EFI_64BIT);
+}
+
+unsigned long x86_efi_facility;
+
+/*
+ * Returns 1 if 'facility' is enabled, 0 otherwise.
+ */
+int efi_enabled(int facility)
+{
+	return test_bit(facility, &x86_efi_facility) != 0;
 }
+EXPORT_SYMBOL(efi_enabled);
 
 static int __init setup_noefi(char *arg)
 {
-	efi_enabled = 0;
+	clear_bit(EFI_BOOT, &x86_efi_facility);
 	return 0;
 }
 early_param("noefi", setup_noefi);
@@ -426,6 +432,7 @@ void __init efi_reserve_boot_services(void)
 
 void __init efi_unmap_memmap(void)
 {
+	clear_bit(EFI_MEMMAP, &x86_efi_facility);
 	if (memmap.map) {
 		early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
 		memmap.map = NULL;
@@ -460,7 +467,7 @@ void __init efi_free_boot_services(void)
 
 static int __init efi_systab_init(void *phys)
 {
-	if (efi_64bit) {
+	if (efi_enabled(EFI_64BIT)) {
 		efi_system_table_64_t *systab64;
 		u64 tmp = 0;
 
@@ -552,7 +559,7 @@ static int __init efi_config_init(u64 tables, int nr_tables)
 	void *config_tables, *tablep;
 	int i, sz;
 
-	if (efi_64bit)
+	if (efi_enabled(EFI_64BIT))
 		sz = sizeof(efi_config_table_64_t);
 	else
 		sz = sizeof(efi_config_table_32_t);
@@ -572,7 +579,7 @@ static int __init efi_config_init(u64 tables, int nr_tables)
 		efi_guid_t guid;
 		unsigned long table;
 
-		if (efi_64bit) {
+		if (efi_enabled(EFI_64BIT)) {
 			u64 table64;
 			guid = ((efi_config_table_64_t *)tablep)->guid;
 			table64 = ((efi_config_table_64_t *)tablep)->table;
@@ -684,7 +691,6 @@ void __init efi_init(void)
 	if (boot_params.efi_info.efi_systab_hi ||
 	    boot_params.efi_info.efi_memmap_hi) {
 		pr_info("Table located above 4GB, disabling EFI.\n");
-		efi_enabled = 0;
 		return;
 	}
 	efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab;
@@ -694,10 +700,10 @@ void __init efi_init(void)
 			  ((__u64)boot_params.efi_info.efi_systab_hi<<32));
 #endif
 
-	if (efi_systab_init(efi_phys.systab)) {
-		efi_enabled = 0;
+	if (efi_systab_init(efi_phys.systab))
 		return;
-	}
+
+	set_bit(EFI_SYSTEM_TABLES, &x86_efi_facility);
 
 	/*
 	 * Show what we know for posterity
@@ -715,10 +721,10 @@ void __init efi_init(void)
 		efi.systab->hdr.revision >> 16,
 		efi.systab->hdr.revision & 0xffff, vendor);
 
-	if (efi_config_init(efi.systab->tables, efi.systab->nr_tables)) {
-		efi_enabled = 0;
+	if (efi_config_init(efi.systab->tables, efi.systab->nr_tables))
 		return;
-	}
+
+	set_bit(EFI_CONFIG_TABLES, &x86_efi_facility);
 
 	/*
 	 * Note: We currently don't support runtime services on an EFI
@@ -727,15 +733,17 @@ void __init efi_init(void)
 
 	if (!efi_is_native())
 		pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n");
-	else if (efi_runtime_init()) {
-		efi_enabled = 0;
-		return;
+	else {
+		if (efi_runtime_init())
+			return;
+		set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
 	}
 
-	if (efi_memmap_init()) {
-		efi_enabled = 0;
+	if (efi_memmap_init())
 		return;
-	}
+
+	set_bit(EFI_MEMMAP, &x86_efi_facility);
+
 #ifdef CONFIG_X86_32
 	if (efi_is_native()) {
 		x86_platform.get_wallclock = efi_get_time;
@@ -941,7 +949,7 @@ void __init efi_enter_virtual_mode(void)
 	 *
 	 * Call EFI services through wrapper functions.
 	 */
-	efi.runtime_version = efi_systab.fw_revision;
+	efi.runtime_version = efi_systab.hdr.revision;
 	efi.get_time = virt_efi_get_time;
 	efi.set_time = virt_efi_set_time;
 	efi.get_wakeup_time = virt_efi_get_wakeup_time;
@@ -969,6 +977,9 @@ u32 efi_mem_type(unsigned long phys_addr)
 	efi_memory_desc_t *md;
 	void *p;
 
+	if (!efi_enabled(EFI_MEMMAP))
+		return 0;
+
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
 		md = p;
 		if ((md->phys_addr <= phys_addr) &&

arch/x86/platform/efi/efi_64.c

@@ -38,7 +38,7 @@
 #include <asm/cacheflush.h>
 #include <asm/fixmap.h>
 
-static pgd_t save_pgd __initdata;
+static pgd_t *save_pgd __initdata;
 static unsigned long efi_flags __initdata;
 
 static void __init early_code_mapping_set_exec(int executable)
@@ -61,12 +61,20 @@ static void __init early_code_mapping_set_exec(int executable)
 void __init efi_call_phys_prelog(void)
 {
 	unsigned long vaddress;
+	int pgd;
+	int n_pgds;
 
 	early_code_mapping_set_exec(1);
 	local_irq_save(efi_flags);
-	vaddress = (unsigned long)__va(0x0UL);
-	save_pgd = *pgd_offset_k(0x0UL);
-	set_pgd(pgd_offset_k(0x0UL), *pgd_offset_k(vaddress));
+
+	n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
+	save_pgd = kmalloc(n_pgds * sizeof(pgd_t), GFP_KERNEL);
+
+	for (pgd = 0; pgd < n_pgds; pgd++) {
+		save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
+		vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
+		set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
+	}
 	__flush_tlb_all();
 }
 
@@ -75,7 +83,11 @@ void __init efi_call_phys_epilog(void)
 	/*
 	 * After the lock is released, the original page table is restored.
 	 */
-	set_pgd(pgd_offset_k(0x0UL), save_pgd);
+	int pgd;
+	int n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE);
+	for (pgd = 0; pgd < n_pgds; pgd++)
+		set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), save_pgd[pgd]);
+	kfree(save_pgd);
 	__flush_tlb_all();
 	local_irq_restore(efi_flags);
 	early_code_mapping_set_exec(0);

arch/x86/platform/uv/tlb_uv.c

@@ -1034,7 +1034,8 @@ static int set_distrib_bits(struct cpumask *flush_mask, struct bau_control *bcp,
  * globally purge translation cache of a virtual address or all TLB's
  * @cpumask: mask of all cpu's in which the address is to be removed
  * @mm: mm_struct containing virtual address range
- * @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu)
+ * @start: start virtual address to be removed from TLB
+ * @end: end virtual address to be remove from TLB
  * @cpu: the current cpu
  *
  * This is the entry point for initiating any UV global TLB shootdown.
@@ -1056,7 +1057,7 @@ static int set_distrib_bits(struct cpumask *flush_mask, struct bau_control *bcp,
  */
 const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 				struct mm_struct *mm, unsigned long start,
-				unsigned end, unsigned int cpu)
+				unsigned long end, unsigned int cpu)
 {
 	int locals = 0;
 	int remotes = 0;
@@ -1113,7 +1114,10 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 
 	record_send_statistics(stat, locals, hubs, remotes, bau_desc);
 
-	bau_desc->payload.address = start;
+	if (!end || (end - start) <= PAGE_SIZE)
+		bau_desc->payload.address = start;
+	else
+		bau_desc->payload.address = TLB_FLUSH_ALL;
 	bau_desc->payload.sending_cpu = cpu;
 	/*
 	 * uv_flush_send_and_wait returns 0 if all cpu's were messaged,

arch/x86/tools/insn_sanity.c

@@ -55,7 +55,7 @@ static FILE		*input_file;	/* Input file name */
 static void usage(const char *err)
 {
 	if (err)
-		fprintf(stderr, "Error: %s\n\n", err);
+		fprintf(stderr, "%s: Error: %s\n\n", prog, err);
 	fprintf(stderr, "Usage: %s [-y|-n|-v] [-s seed[,no]] [-m max] [-i input]\n", prog);
 	fprintf(stderr, "\t-y	64bit mode\n");
 	fprintf(stderr, "\t-n	32bit mode\n");
@@ -269,7 +269,13 @@ int main(int argc, char **argv)
 		insns++;
 	}
 
-	fprintf(stdout, "%s: decoded and checked %d %s instructions with %d errors (seed:0x%x)\n", (errors) ? "Failure" : "Success", insns, (input_file) ? "given" : "random", errors, seed);
+	fprintf(stdout, "%s: %s: decoded and checked %d %s instructions with %d errors (seed:0x%x)\n",
+		prog,
+		(errors) ? "Failure" : "Success",
+		insns,
+		(input_file) ? "given" : "random",
+		errors,
+		seed);
 
 	return errors ? 1 : 0;
 }

arch/x86/tools/relocs.c

@@ -814,12 +814,14 @@ int main(int argc, char **argv)
 	read_relocs(fp);
 	if (show_absolute_syms) {
 		print_absolute_symbols();
-		return 0;
+		goto out;
 	}
 	if (show_absolute_relocs) {
 		print_absolute_relocs();
-		return 0;
+		goto out;
 	}
 	emit_relocs(as_text, use_real_mode);
+out:
+	fclose(fp);
 	return 0;
 }

arch/xtensa/include/asm/dma-mapping.h

@@ -170,4 +170,19 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	consistent_sync(vaddr, size, direction);
 }
 
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+				    struct vm_area_struct *vma, void *cpu_addr,
+				    dma_addr_t dma_addr, size_t size)
+{
+	return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size)
+{
+	return -EINVAL;
+}
+
 #endif	/* _XTENSA_DMA_MAPPING_H */

block/genhd.c

@@ -35,6 +35,8 @@ static DEFINE_IDR(ext_devt_idr);
 
 static struct device_type disk_type;
 
+static void disk_check_events(struct disk_events *ev,
+			      unsigned int *clearing_ptr);
 static void disk_alloc_events(struct gendisk *disk);
 static void disk_add_events(struct gendisk *disk);
 static void disk_del_events(struct gendisk *disk);
@@ -1549,6 +1551,7 @@ unsigned int disk_clear_events(struct gendisk *disk, unsigned int mask)
 	const struct block_device_operations *bdops = disk->fops;
 	struct disk_events *ev = disk->ev;
 	unsigned int pending;
+	unsigned int clearing = mask;
 
 	if (!ev) {
 		/* for drivers still using the old ->media_changed method */
@@ -1558,34 +1561,53 @@ unsigned int disk_clear_events(struct gendisk *disk, unsigned int mask)
 		return 0;
 	}
 
-	/* tell the workfn about the events being cleared */
+	disk_block_events(disk);
+
+	/*
+	 * store the union of mask and ev->clearing on the stack so that the
+	 * race with disk_flush_events does not cause ambiguity (ev->clearing
+	 * can still be modified even if events are blocked).
+	 */
 	spin_lock_irq(&ev->lock);
-	ev->clearing |= mask;
+	clearing |= ev->clearing;
+	ev->clearing = 0;
 	spin_unlock_irq(&ev->lock);
 
-	/* uncondtionally schedule event check and wait for it to finish */
-	disk_block_events(disk);
-	queue_delayed_work(system_freezable_wq, &ev->dwork, 0);
-	flush_delayed_work(&ev->dwork);
-	__disk_unblock_events(disk, false);
+	disk_check_events(ev, &clearing);
+	/*
+	 * if ev->clearing is not 0, the disk_flush_events got called in the
+	 * middle of this function, so we want to run the workfn without delay.
+	 */
+	__disk_unblock_events(disk, ev->clearing ? true : false);
 
 	/* then, fetch and clear pending events */
 	spin_lock_irq(&ev->lock);
-	WARN_ON_ONCE(ev->clearing & mask);	/* cleared by workfn */
 	pending = ev->pending & mask;
 	ev->pending &= ~mask;
 	spin_unlock_irq(&ev->lock);
+	WARN_ON_ONCE(clearing & mask);
 
 	return pending;
 }
 
+/*
+ * Separate this part out so that a different pointer for clearing_ptr can be
+ * passed in for disk_clear_events.
+ */
 static void disk_events_workfn(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
 	struct disk_events *ev = container_of(dwork, struct disk_events, dwork);
+
+	disk_check_events(ev, &ev->clearing);
+}
+
+static void disk_check_events(struct disk_events *ev,
+			      unsigned int *clearing_ptr)
+{
 	struct gendisk *disk = ev->disk;
 	char *envp[ARRAY_SIZE(disk_uevents) + 1] = { };
-	unsigned int clearing = ev->clearing;
+	unsigned int clearing = *clearing_ptr;
 	unsigned int events;
 	unsigned long intv;
 	int nr_events = 0, i;
@@ -1598,7 +1620,7 @@ static void disk_events_workfn(struct work_struct *work)
 
 	events &= ~ev->pending;
 	ev->pending |= events;
-	ev->clearing &= ~clearing;
+	*clearing_ptr &= ~clearing;
 
 	intv = disk_events_poll_jiffies(disk);
 	if (!ev->block && intv)

drivers/acpi/osl.c

@@ -250,7 +250,7 @@ acpi_physical_address __init acpi_os_get_root_pointer(void)
 		return acpi_rsdp;
 #endif
 
-	if (efi_enabled) {
+	if (efi_enabled(EFI_CONFIG_TABLES)) {
 		if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
 			return efi.acpi20;
 		else if (efi.acpi != EFI_INVALID_TABLE_ADDR)

drivers/atm/iphase.h

@@ -636,82 +636,82 @@ struct rx_buf_desc {
 #define SEG_BASE IPHASE5575_FRAG_CONTROL_REG_BASE  
 #define REASS_BASE IPHASE5575_REASS_CONTROL_REG_BASE  
 
-typedef volatile u_int  freg_t;
+typedef volatile u_int	ffreg_t;
 typedef u_int   rreg_t;
 
 typedef struct _ffredn_t {
-        freg_t  idlehead_high;  /* Idle cell header (high)              */
-        freg_t  idlehead_low;   /* Idle cell header (low)               */
-        freg_t  maxrate;        /* Maximum rate                         */
-        freg_t  stparms;        /* Traffic Management Parameters        */
-        freg_t  abrubr_abr;     /* ABRUBR Priority Byte 1, TCR Byte 0   */
-        freg_t  rm_type;        /*                                      */
-        u_int   filler5[0x17 - 0x06];
-        freg_t  cmd_reg;        /* Command register                     */
-        u_int   filler18[0x20 - 0x18];
-        freg_t  cbr_base;       /* CBR Pointer Base                     */
-        freg_t  vbr_base;       /* VBR Pointer Base                     */
-        freg_t  abr_base;       /* ABR Pointer Base                     */
-        freg_t  ubr_base;       /* UBR Pointer Base                     */
-        u_int   filler24;
-        freg_t  vbrwq_base;     /* VBR Wait Queue Base                  */
-        freg_t  abrwq_base;     /* ABR Wait Queue Base                  */
-        freg_t  ubrwq_base;     /* UBR Wait Queue Base                  */
-        freg_t  vct_base;       /* Main VC Table Base                   */
-        freg_t  vcte_base;      /* Extended Main VC Table Base          */
-        u_int   filler2a[0x2C - 0x2A];
-        freg_t  cbr_tab_beg;    /* CBR Table Begin                      */
-        freg_t  cbr_tab_end;    /* CBR Table End                        */
-        freg_t  cbr_pointer;    /* CBR Pointer                          */
-        u_int   filler2f[0x30 - 0x2F];
-        freg_t  prq_st_adr;     /* Packet Ready Queue Start Address     */
-        freg_t  prq_ed_adr;     /* Packet Ready Queue End Address       */
-        freg_t  prq_rd_ptr;     /* Packet Ready Queue read pointer      */
-        freg_t  prq_wr_ptr;     /* Packet Ready Queue write pointer     */
-        freg_t  tcq_st_adr;     /* Transmit Complete Queue Start Address*/
-        freg_t  tcq_ed_adr;     /* Transmit Complete Queue End Address  */
-        freg_t  tcq_rd_ptr;     /* Transmit Complete Queue read pointer */
-        freg_t  tcq_wr_ptr;     /* Transmit Complete Queue write pointer*/
-        u_int   filler38[0x40 - 0x38];
-        freg_t  queue_base;     /* Base address for PRQ and TCQ         */
-        freg_t  desc_base;      /* Base address of descriptor table     */
-        u_int   filler42[0x45 - 0x42];
-        freg_t  mode_reg_0;     /* Mode register 0                      */
-        freg_t  mode_reg_1;     /* Mode register 1                      */
-        freg_t  intr_status_reg;/* Interrupt Status register            */
-        freg_t  mask_reg;       /* Mask Register                        */
-        freg_t  cell_ctr_high1; /* Total cell transfer count (high)     */
-        freg_t  cell_ctr_lo1;   /* Total cell transfer count (low)      */
-        freg_t  state_reg;      /* Status register                      */
-        u_int   filler4c[0x58 - 0x4c];
-        freg_t  curr_desc_num;  /* Contains the current descriptor num  */
-        freg_t  next_desc;      /* Next descriptor                      */
-        freg_t  next_vc;        /* Next VC                              */
-        u_int   filler5b[0x5d - 0x5b];
-        freg_t  present_slot_cnt;/* Present slot count                  */
-        u_int   filler5e[0x6a - 0x5e];
-        freg_t  new_desc_num;   /* New descriptor number                */
-        freg_t  new_vc;         /* New VC                               */
-        freg_t  sched_tbl_ptr;  /* Schedule table pointer               */
-        freg_t  vbrwq_wptr;     /* VBR wait queue write pointer         */
-        freg_t  vbrwq_rptr;     /* VBR wait queue read pointer          */
-        freg_t  abrwq_wptr;     /* ABR wait queue write pointer         */
-        freg_t  abrwq_rptr;     /* ABR wait queue read pointer          */
-        freg_t  ubrwq_wptr;     /* UBR wait queue write pointer         */
-        freg_t  ubrwq_rptr;     /* UBR wait queue read pointer          */
-        freg_t  cbr_vc;         /* CBR VC                               */
-        freg_t  vbr_sb_vc;      /* VBR SB VC                            */
-        freg_t  abr_sb_vc;      /* ABR SB VC                            */
-        freg_t  ubr_sb_vc;      /* UBR SB VC                            */
-        freg_t  vbr_next_link;  /* VBR next link                        */
-        freg_t  abr_next_link;  /* ABR next link                        */
-        freg_t  ubr_next_link;  /* UBR next link                        */
-        u_int   filler7a[0x7c-0x7a];
-        freg_t  out_rate_head;  /* Out of rate head                     */
-        u_int   filler7d[0xca-0x7d]; /* pad out to full address space   */
-        freg_t  cell_ctr_high1_nc;/* Total cell transfer count (high)   */
-        freg_t  cell_ctr_lo1_nc;/* Total cell transfer count (low)      */
-        u_int   fillercc[0x100-0xcc]; /* pad out to full address space   */
+	ffreg_t	idlehead_high;	/* Idle cell header (high)		*/
+	ffreg_t	idlehead_low;	/* Idle cell header (low)		*/
+	ffreg_t	maxrate;	/* Maximum rate				*/
+	ffreg_t	stparms;	/* Traffic Management Parameters	*/
+	ffreg_t	abrubr_abr;	/* ABRUBR Priority Byte 1, TCR Byte 0	*/
+	ffreg_t	rm_type;	/*					*/
+	u_int	filler5[0x17 - 0x06];
+	ffreg_t	cmd_reg;	/* Command register			*/
+	u_int	filler18[0x20 - 0x18];
+	ffreg_t	cbr_base;	/* CBR Pointer Base			*/
+	ffreg_t	vbr_base;	/* VBR Pointer Base			*/
+	ffreg_t	abr_base;	/* ABR Pointer Base			*/
+	ffreg_t	ubr_base;	/* UBR Pointer Base			*/
+	u_int	filler24;
+	ffreg_t	vbrwq_base;	/* VBR Wait Queue Base			*/
+	ffreg_t	abrwq_base;	/* ABR Wait Queue Base			*/
+	ffreg_t	ubrwq_base;	/* UBR Wait Queue Base			*/
+	ffreg_t	vct_base;	/* Main VC Table Base			*/
+	ffreg_t	vcte_base;	/* Extended Main VC Table Base		*/
+	u_int	filler2a[0x2C - 0x2A];
+	ffreg_t	cbr_tab_beg;	/* CBR Table Begin			*/
+	ffreg_t	cbr_tab_end;	/* CBR Table End			*/
+	ffreg_t	cbr_pointer;	/* CBR Pointer				*/
+	u_int	filler2f[0x30 - 0x2F];
+	ffreg_t	prq_st_adr;	/* Packet Ready Queue Start Address	*/
+	ffreg_t	prq_ed_adr;	/* Packet Ready Queue End Address	*/
+	ffreg_t	prq_rd_ptr;	/* Packet Ready Queue read pointer	*/
+	ffreg_t	prq_wr_ptr;	/* Packet Ready Queue write pointer	*/
+	ffreg_t	tcq_st_adr;	/* Transmit Complete Queue Start Address*/
+	ffreg_t	tcq_ed_adr;	/* Transmit Complete Queue End Address	*/
+	ffreg_t	tcq_rd_ptr;	/* Transmit Complete Queue read pointer */
+	ffreg_t	tcq_wr_ptr;	/* Transmit Complete Queue write pointer*/
+	u_int	filler38[0x40 - 0x38];
+	ffreg_t	queue_base;	/* Base address for PRQ and TCQ		*/
+	ffreg_t	desc_base;	/* Base address of descriptor table	*/
+	u_int	filler42[0x45 - 0x42];
+	ffreg_t	mode_reg_0;	/* Mode register 0			*/
+	ffreg_t	mode_reg_1;	/* Mode register 1			*/
+	ffreg_t	intr_status_reg;/* Interrupt Status register		*/
+	ffreg_t	mask_reg;	/* Mask Register			*/
+	ffreg_t	cell_ctr_high1; /* Total cell transfer count (high)	*/
+	ffreg_t	cell_ctr_lo1;	/* Total cell transfer count (low)	*/
+	ffreg_t	state_reg;	/* Status register			*/
+	u_int	filler4c[0x58 - 0x4c];
+	ffreg_t	curr_desc_num;	/* Contains the current descriptor num	*/
+	ffreg_t	next_desc;	/* Next descriptor			*/
+	ffreg_t	next_vc;	/* Next VC				*/
+	u_int	filler5b[0x5d - 0x5b];
+	ffreg_t	present_slot_cnt;/* Present slot count			*/
+	u_int	filler5e[0x6a - 0x5e];
+	ffreg_t	new_desc_num;	/* New descriptor number		*/
+	ffreg_t	new_vc;		/* New VC				*/
+	ffreg_t	sched_tbl_ptr;	/* Schedule table pointer		*/
+	ffreg_t	vbrwq_wptr;	/* VBR wait queue write pointer		*/
+	ffreg_t	vbrwq_rptr;	/* VBR wait queue read pointer		*/
+	ffreg_t	abrwq_wptr;	/* ABR wait queue write pointer		*/
+	ffreg_t	abrwq_rptr;	/* ABR wait queue read pointer		*/
+	ffreg_t	ubrwq_wptr;	/* UBR wait queue write pointer		*/
+	ffreg_t	ubrwq_rptr;	/* UBR wait queue read pointer		*/
+	ffreg_t	cbr_vc;		/* CBR VC				*/
+	ffreg_t	vbr_sb_vc;	/* VBR SB VC				*/
+	ffreg_t	abr_sb_vc;	/* ABR SB VC				*/
+	ffreg_t	ubr_sb_vc;	/* UBR SB VC				*/
+	ffreg_t	vbr_next_link;	/* VBR next link			*/
+	ffreg_t	abr_next_link;	/* ABR next link			*/
+	ffreg_t	ubr_next_link;	/* UBR next link			*/
+	u_int	filler7a[0x7c-0x7a];
+	ffreg_t	out_rate_head;	/* Out of rate head			*/
+	u_int	filler7d[0xca-0x7d]; /* pad out to full address space	*/
+	ffreg_t	cell_ctr_high1_nc;/* Total cell transfer count (high)	*/
+	ffreg_t	cell_ctr_lo1_nc;/* Total cell transfer count (low)	*/
+	u_int	fillercc[0x100-0xcc]; /* pad out to full address space	 */
 } ffredn_t;
 
 typedef struct _rfredn_t {

drivers/base/regmap/internal.h

@@ -16,6 +16,7 @@
 #include <linux/regmap.h>
 #include <linux/fs.h>
 #include <linux/list.h>
+#include <linux/wait.h>
 
 struct regmap;
 struct regcache_ops;
@@ -39,6 +40,13 @@ struct regmap_format {
 	unsigned int (*parse_val)(void *buf);
 };
 
+struct regmap_async {
+	struct list_head list;
+	struct work_struct cleanup;
+	struct regmap *map;
+	void *work_buf;
+};
+
 struct regmap {
 	struct mutex mutex;
 	spinlock_t spinlock;
@@ -53,6 +61,11 @@ struct regmap {
 	void *bus_context;
 	const char *name;
 
+	spinlock_t async_lock;
+	wait_queue_head_t async_waitq;
+	struct list_head async_list;
+	int async_ret;
+
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs;
 	const char *debugfs_name;
@@ -74,6 +87,9 @@ struct regmap {
 	const struct regmap_access_table *volatile_table;
 	const struct regmap_access_table *precious_table;
 
+	int (*reg_read)(void *context, unsigned int reg, unsigned int *val);
+	int (*reg_write)(void *context, unsigned int reg, unsigned int val);
+
 	u8 read_flag_mask;
 	u8 write_flag_mask;
 
@@ -175,6 +191,8 @@ bool regcache_set_val(void *base, unsigned int idx,
 		      unsigned int val, unsigned int word_size);
 int regcache_lookup_reg(struct regmap *map, unsigned int reg);
 
+void regmap_async_complete_cb(struct regmap_async *async, int ret);
+
 extern struct regcache_ops regcache_rbtree_ops;
 extern struct regcache_ops regcache_lzo_ops;
 

drivers/base/regmap/regmap-spi.c

@@ -15,6 +15,21 @@
 #include <linux/init.h>
 #include <linux/module.h>
 
+#include "internal.h"
+
+struct regmap_async_spi {
+	struct regmap_async core;
+	struct spi_message m;
+	struct spi_transfer t[2];
+};
+
+static void regmap_spi_complete(void *data)
+{
+	struct regmap_async_spi *async = data;
+
+	regmap_async_complete_cb(&async->core, async->m.status);
+}
+
 static int regmap_spi_write(void *context, const void *data, size_t count)
 {
 	struct device *dev = context;
@@ -40,6 +55,41 @@ static int regmap_spi_gather_write(void *context,
 	return spi_sync(spi, &m);
 }
 
+static int regmap_spi_async_write(void *context,
+				  const void *reg, size_t reg_len,
+				  const void *val, size_t val_len,
+				  struct regmap_async *a)
+{
+	struct regmap_async_spi *async = container_of(a,
+						      struct regmap_async_spi,
+						      core);
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+
+	async->t[0].tx_buf = reg;
+	async->t[0].len = reg_len;
+	async->t[1].tx_buf = val;
+	async->t[1].len = val_len;
+
+	spi_message_init(&async->m);
+	spi_message_add_tail(&async->t[0], &async->m);
+	spi_message_add_tail(&async->t[1], &async->m);
+
+	async->m.complete = regmap_spi_complete;
+	async->m.context = async;
+
+	return spi_async(spi, &async->m);
+}
+
+static struct regmap_async *regmap_spi_async_alloc(void)
+{
+	struct regmap_async_spi *async_spi;
+
+	async_spi = kzalloc(sizeof(*async_spi), GFP_KERNEL);
+
+	return &async_spi->core;
+}
+
 static int regmap_spi_read(void *context,
 			   const void *reg, size_t reg_size,
 			   void *val, size_t val_size)
@@ -53,6 +103,8 @@ static int regmap_spi_read(void *context,
 static struct regmap_bus regmap_spi = {
 	.write = regmap_spi_write,
 	.gather_write = regmap_spi_gather_write,
+	.async_write = regmap_spi_async_write,
+	.async_alloc = regmap_spi_async_alloc,
 	.read = regmap_spi_read,
 	.read_flag_mask = 0x80,
 };