Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (152 commits)
  powerpc: Fix hard CPU IDs detection
  powerpc/pmac: Update via-pmu to new syscore_ops
  powerpc/kvm: Fix the build for 32-bit Book 3S (classic) processors
  powerpc/kvm: Fix kvmppc_core_pending_dec
  powerpc: Remove last piece of GEMINI
  powerpc: Fix for Pegasos keyboard and mouse
  powerpc: Make early memory scan more resilient to out of order nodes
  powerpc/pseries/iommu: Cleanup ddw naming
  powerpc/pseries/iommu: Find windows after kexec during boot
  powerpc/pseries/iommu: Remove ddw property when destroying window
  powerpc/pseries/iommu: Add additional checks when changing iommu mask
  powerpc/pseries/iommu: Use correct return type in dupe_ddw_if_already_created
  powerpc: Remove unused/obsolete CONFIG_XICS
  misc: Add CARMA DATA-FPGA Programmer support
  misc: Add CARMA DATA-FPGA Access Driver
  powerpc: Make IRQ_NOREQUEST last to clear, first to set
  powerpc: Integrated Flash controller device tree bindings
  powerpc/85xx: Create dts of each core in CAMP mode for P1020RDB
  powerpc/85xx: Fix PCIe IDSEL for Px020RDB
  powerpc/85xx: P2020 DTS: re-organize dts files
  ...

Documentation/devicetree/bindings/net/can/fsl-flexcan.txt

@@ -0,0 +1,61 @@
+CAN Device Tree Bindings
+------------------------
+2011 Freescale Semiconductor, Inc.
+
+fsl,flexcan-v1.0 nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller.
+
+CPI Clock- Can Protocol Interface Clock
+	This CLK_SRC bit of CTRL(control register) selects the clock source to
+	the CAN Protocol Interface(CPI) to be either the peripheral clock
+	(driven by the PLL) or the crystal oscillator clock. The selected clock
+	is the one fed to the prescaler to generate the Serial Clock (Sclock).
+	The PRESDIV field of CTRL(control register) controls a prescaler that
+	generates the Serial Clock (Sclock), whose period defines the
+	time quantum used to compose the CAN waveform.
+
+Can Engine Clock Source
+	There are two sources for CAN clock
+	- Platform Clock  It represents the bus clock
+	- Oscillator Clock
+
+	Peripheral Clock (PLL)
+	--------------
+		     |
+		    ---------		      -------------
+		    |       |CPI Clock	      | Prescaler |       Sclock
+		    |       |---------------->| (1.. 256) |------------>
+		    ---------		      -------------
+                     |  |
+	--------------  ---------------------CLK_SRC
+	Oscillator Clock
+
+- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects
+			     the peripheral clock. PLL clock is fed to the
+			     prescaler to generate the Serial Clock (Sclock).
+			     Valid values are "oscillator" and "platform"
+			     "oscillator": CAN engine clock source is oscillator clock.
+			     "platform" The CAN engine clock source is the bus clock
+		             (platform clock).
+
+- fsl,flexcan-clock-divider : for the reference and system clock, an additional
+			      clock divider can be specified.
+- clock-frequency: frequency required to calculate the bitrate for FlexCAN.
+
+Note:
+	- v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC.
+	- P1010 does not have oscillator as the Clock Source.So the default
+	  Clock Source is platform clock.
+Examples:
+
+	can0@1c000 {
+		compatible = "fsl,flexcan-v1.0";
+		reg = <0x1c000 0x1000>;
+		interrupts = <48 0x2>;
+		interrupt-parent = <&mpic>;
+		fsl,flexcan-clock-source = "platform";
+		fsl,flexcan-clock-divider = <2>;
+		clock-frequency = <fixed by u-boot>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/ifc.txt

@@ -0,0 +1,76 @@
+Integrated Flash Controller
+
+Properties:
+- name : Should be ifc
+- compatible : should contain "fsl,ifc". The version of the integrated
+               flash controller can be found in the IFC_REV register at
+               offset zero.
+
+- #address-cells : Should be either two or three.  The first cell is the
+                   chipselect number, and the remaining cells are the
+                   offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+                can be.
+- reg : Offset and length of the register set for the device
+- interrupts : IFC has two interrupts. The first one is the "common"
+               interrupt(CM_EVTER_STAT), and second is the NAND interrupt
+               (NAND_EVTER_STAT).
+
+- ranges : Each range corresponds to a single chipselect, and covers
+           the entire access window as configured.
+
+Child device nodes describe the devices connected to IFC such as NOR (e.g.
+cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+like FPGAs, CPLDs, etc.
+
+Example:
+
+	ifc@ffe1e000 {
+		compatible = "fsl,ifc", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x0 0xffe1e000 0 0x2000>;
+		interrupts = <16 2 19 2>;
+
+		/* NOR, NAND Flashes and CPLD on board */
+		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+			  0x1 0x0 0x0 0xffa00000 0x00010000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 32MB for user data */
+				reg = <0x0 0x02000000>;
+				label = "NOR Data";
+			};
+		};
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x1 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+		};
+
+		cpld@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1010rdb-cpld";
+			reg = <0x3 0x0 0x000001f>;
+		};
+	};

Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt

@@ -0,0 +1,38 @@
+* Freescale MPIC timers
+
+Required properties:
+- compatible: "fsl,mpic-global-timer"
+
+- reg : Contains two regions.  The first is the main timer register bank
+  (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx).  The second is the timer control
+  register (TCRx) for the group.
+
+- fsl,available-ranges: use <start count> style section to define which
+  timer interrupts can be used.  This property is optional; without this,
+  all timers within the group can be used.
+
+- interrupts: one interrupt per timer in the group, in order, starting
+  with timer zero.  If timer-available-ranges is present, only the
+  interrupts that correspond to available timers shall be present.
+
+Example:
+	/* Note that this requires #interrupt-cells to be 4 */
+	timer0: timer@41100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x41100 0x100 0x41300 4>;
+
+		/* Another AMP partition is using timers 0 and 1 */
+		fsl,available-ranges = <2 2>;
+
+		interrupts = <2 0 3 0
+		              3 0 3 0>;
+	};
+
+	timer1: timer@42100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x42100 0x100 0x42300 4>;
+		interrupts = <4 0 3 0
+		              5 0 3 0
+		              6 0 3 0
+		              7 0 3 0>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/mpic.txt

@@ -190,7 +190,7 @@ EXAMPLE 4
 	 */
 	timer0: timer@41100 {
 		compatible = "fsl,mpic-global-timer";
-		reg = <0x41100 0x100>;
+		reg = <0x41100 0x100 0x41300 4>;
 		interrupts = <0 0 3 0
 		              1 0 3 0
 		              2 0 3 0

arch/powerpc/Kconfig

@@ -193,6 +193,12 @@ config SYS_SUPPORTS_APM_EMULATION
 	default y if PMAC_APM_EMU
 	bool
 
+config EPAPR_BOOT
+	bool
+	help
+	  Used to allow a board to specify it wants an ePAPR compliant wrapper.
+	default n
+
 config DEFAULT_UIMAGE
 	bool
 	help

arch/powerpc/Kconfig.debug

@@ -267,6 +267,11 @@ config PPC_EARLY_DEBUG_USBGECKO
 	  Select this to enable early debugging for Nintendo GameCube/Wii
 	  consoles via an external USB Gecko adapter.
 
+config PPC_EARLY_DEBUG_WSP
+	bool "Early debugging via WSP's internal UART"
+	depends on PPC_WSP
+	select PPC_UDBG_16550
+
 endchoice
 
 config PPC_EARLY_DEBUG_44x_PHYSLOW

arch/powerpc/boot/Makefile

@@ -69,7 +69,8 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
 		fsl-soc.c mpc8xx.c pq2.c ugecon.c
 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
-		cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
+		cuboot-ebony.c cuboot-hotfoot.c epapr.c treeboot-ebony.c \
+		prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -127,7 +128,7 @@ quiet_cmd_bootas = BOOTAS  $@
       cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
 
 quiet_cmd_bootar = BOOTAR  $@
-      cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+      cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
 
 $(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
 	$(call if_changed_dep,bootcc)
@@ -182,6 +183,7 @@ image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
 image-$(CONFIG_PPC_PRPMC2800)		+= dtbImage.prpmc2800
 image-$(CONFIG_PPC_ISERIES)		+= zImage.iseries
 image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
+image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
 
 #
 # Targets which embed a device tree blob

arch/powerpc/boot/crt0.S

@@ -6,16 +6,28 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
- * NOTE: this code runs in 32 bit mode and is packaged as ELF32.
+ * NOTE: this code runs in 32 bit mode, is position-independent,
+ * and is packaged as ELF32.
  */
 
 #include "ppc_asm.h"
 
 	.text
-	/* a procedure descriptor used when booting this as a COFF file */
+	/* A procedure descriptor used when booting this as a COFF file.
+	 * When making COFF, this comes first in the link and we're
+	 * linked at 0x500000.
+	 */
 	.globl	_zimage_start_opd
 _zimage_start_opd:
-	.long	_zimage_start, 0, 0, 0
+	.long	0x500000, 0, 0, 0
+
+p_start:	.long	_start
+p_etext:	.long	_etext
+p_bss_start:	.long	__bss_start
+p_end:		.long	_end
+
+	.weak	_platform_stack_top
+p_pstack:	.long	_platform_stack_top
 
 	.weak	_zimage_start
 	.globl	_zimage_start
@@ -24,37 +36,65 @@ _zimage_start:
 _zimage_start_lib:
 	/* Work out the offset between the address we were linked at
 	   and the address where we're running. */
-	bl	1f
-1:	mflr	r0
-	lis	r9,1b@ha
-	addi	r9,r9,1b@l
-	subf.	r0,r9,r0
-	beq	3f		/* if running at same address as linked */
+	bl	.+4
+p_base:	mflr	r10		/* r10 now points to runtime addr of p_base */
+	/* grab the link address of the dynamic section in r11 */
+	addis	r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha
+	lwz	r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11)
+	cmpwi	r11,0
+	beq	3f		/* if not linked -pie */
+	/* get the runtime address of the dynamic section in r12 */
+	.weak	__dynamic_start
+	addis	r12,r10,(__dynamic_start-p_base)@ha
+	addi	r12,r12,(__dynamic_start-p_base)@l
+	subf	r11,r11,r12	/* runtime - linktime offset */
+
+	/* The dynamic section contains a series of tagged entries.
+	 * We need the RELA and RELACOUNT entries. */
+RELA = 7
+RELACOUNT = 0x6ffffff9
+	li	r9,0
+	li	r0,0
+9:	lwz	r8,0(r12)	/* get tag */
+	cmpwi	r8,0
+	beq	10f		/* end of list */
+	cmpwi	r8,RELA
+	bne	11f
+	lwz	r9,4(r12)	/* get RELA pointer in r9 */
+	b	12f
+11:	addis	r8,r8,(-RELACOUNT)@ha
+	cmpwi	r8,RELACOUNT@l
+	bne	12f
+	lwz	r0,4(r12)	/* get RELACOUNT value in r0 */
+12:	addi	r12,r12,8
+	b	9b
 
-	/* The .got2 section contains a list of addresses, so add
-	   the address offset onto each entry. */
-	lis	r9,__got2_start@ha
-	addi	r9,r9,__got2_start@l
-	lis	r8,__got2_end@ha
-	addi	r8,r8,__got2_end@l
-	subf.	r8,r9,r8
+	/* The relocation section contains a list of relocations.
+	 * We now do the R_PPC_RELATIVE ones, which point to words
+	 * which need to be initialized with addend + offset.
+	 * The R_PPC_RELATIVE ones come first and there are RELACOUNT
+	 * of them. */
+10:	/* skip relocation if we don't have both */
+	cmpwi	r0,0
 	beq	3f
-	srwi.	r8,r8,2
-	mtctr	r8
-	add	r9,r0,r9
-2:	lwz	r8,0(r9)
-	add	r8,r8,r0
-	stw	r8,0(r9)
-	addi	r9,r9,4
+	cmpwi	r9,0
+	beq	3f
+
+	add	r9,r9,r11	/* Relocate RELA pointer */
+	mtctr	r0
+2:	lbz	r0,4+3(r9)	/* ELF32_R_INFO(reloc->r_info) */
+	cmpwi	r0,22		/* R_PPC_RELATIVE */
+	bne	3f
+	lwz	r12,0(r9)	/* reloc->r_offset */
+	lwz	r0,8(r9)	/* reloc->r_addend */
+	add	r0,r0,r11
+	stwx	r0,r11,r12
+	addi	r9,r9,12
 	bdnz	2b
 
 	/* Do a cache flush for our text, in case the loader didn't */
-3:	lis	r9,_start@ha
-	addi	r9,r9,_start@l
-	add	r9,r0,r9
-	lis	r8,_etext@ha
-	addi	r8,r8,_etext@l
-	add	r8,r0,r8
+3:	lwz	r9,p_start-p_base(r10)	/* note: these are relocated now */
+	lwz	r8,p_etext-p_base(r10)
 4:	dcbf	r0,r9
 	icbi	r0,r9
 	addi	r9,r9,0x20
@@ -64,27 +104,19 @@ _zimage_start_lib:
 	isync
 
 	/* Clear the BSS */
-	lis	r9,__bss_start@ha
-	addi	r9,r9,__bss_start@l
-	add	r9,r0,r9
-	lis	r8,_end@ha
-	addi	r8,r8,_end@l
-	add	r8,r0,r8
-	li	r10,0
-5:	stw	r10,0(r9)
+	lwz	r9,p_bss_start-p_base(r10)
+	lwz	r8,p_end-p_base(r10)
+	li	r0,0
+5:	stw	r0,0(r9)
 	addi	r9,r9,4
 	cmplw	cr0,r9,r8
 	blt	5b
 
 	/* Possibly set up a custom stack */
-.weak	_platform_stack_top
-	lis	r8,_platform_stack_top@ha
-	addi	r8,r8,_platform_stack_top@l
+	lwz	r8,p_pstack-p_base(r10)
 	cmpwi	r8,0
 	beq	6f
-	add	r8,r0,r8
 	lwz	r1,0(r8)
-	add	r1,r0,r1
 	li	r0,0
 	stwu	r0,-16(r1)	/* establish a stack frame */
 6:

arch/powerpc/boot/dts/p1020rdb.dts

@@ -9,12 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p1020si.dtsi"
+
 / {
-	model = "fsl,P1020";
+	model = "fsl,P1020RDB";
 	compatible = "fsl,P1020RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		serial0 = &serial0;
@@ -26,34 +25,11 @@
 		pci1 = &pci1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
 	memory {
 		device_type = "memory";
 	};
 
 	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -165,88 +141,14 @@
 	};
 
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p1020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p1020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p1020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
 		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
 
 			fsl_m25p80@0 {
 				#address-cells = <1>;
@@ -294,66 +196,7 @@
 			};
 		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p1020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>; // L2,256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
 		mdio@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-mdio";
-			reg = <0x24000 0x1000 0xb0030 0x4>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
@@ -369,10 +212,6 @@
 		};
 
 		mdio@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-tbi";
-			reg = <0x25000 0x1000 0xb1030 0x4>;
 
 			tbi0: tbi-phy@11 {
 				reg = <0x11>;
@@ -381,97 +220,25 @@
 		};
 
 		enet0: ethernet@b0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
 
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb0000 0x1000>;
-				interrupts = <29 2 30 2 34 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb4000 0x1000>;
-				interrupts = <17 2 18 2 24 2>;
-			};
 		};
 
 		enet1: ethernet@b1000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 			tbi-handle = <&tbi0>;
 			phy-connection-type = "sgmii";
 
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb1000 0x1000>;
-				interrupts = <35 2 36 2 40 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb5000 0x1000>;
-				interrupts = <51 2 52 2 67 2>;
-			};
 		};
 
 		enet2: ethernet@b2000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb2000 0x1000>;
-				interrupts = <31 2 32 2 33 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb6000 0x1000>;
-				interrupts = <25 2 26 2 27 2>;
-			};
 		};
 
 		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
 			phy_type = "ulpi";
 		};
 
@@ -481,82 +248,23 @@
 		   it enables USB2. OTOH, U-Boot does create a new node
 		   when there isn't any. So, just comment it out.
 		usb@23000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <46 0x2>;
 			phy_type = "ulpi";
 		};
 		*/
 
-		sdhci@2e000 {
-			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p1020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
 	};
 
 	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
@@ -573,18 +281,16 @@
 	};
 
 	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;

arch/powerpc/boot/dts/p1020rdb_camp_core0.dts

@@ -0,0 +1,213 @@
+/*
+ * P1020 RDB  Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
+ * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
+ *
+ * Please note to add "-b 0" for core0's dts compiling.
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si.dtsi"
+
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
+
+	aliases {
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		PowerPC,P1020@1 {
+		status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@b0000 {
+			status = "disabled";
+		};
+
+		enet1: ethernet@b1000 {
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+
+		/* USB2 is shared with localbus, so it must be disabled
+		   by default. We can't put 'status = "disabled";' here
+		   since U-Boot doesn't clear the status property when
+		   it enables USB2. OTOH, U-Boot does create a new node
+		   when there isn't any. So, just comment it out.
+		usb@23000 {
+			phy_type = "ulpi";
+		};
+		*/
+
+		mpic: pic@40000 {
+			protected-sources = <
+			42 29 30 34	/* serial1, enet0-queue-group0 */
+			17 18 24 45	/* enet0-queue-group1, crypto */
+			>;
+		};
+
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};

arch/powerpc/boot/dts/p1020rdb_camp_core1.dts

@@ -0,0 +1,148 @@
+/*
+ * P1020 RDB Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, eth0, crypto.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si.dtsi"
+
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial1;
+		};
+
+	cpus {
+		PowerPC,P1020@0 {
+		status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		ecm-law@0 {
+			status = "disabled";
+		};
+
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
+		};
+
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
+		dma@21300 {
+			status = "disabled";
+		};
+
+		mdio@24000 {
+			status = "disabled";
+		};
+
+		mdio@25000 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@b0000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+
+		};
+
+		enet1: ethernet@b1000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@b2000 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			16 		/* ecm, mem, L2, pci0, pci1 */
+			43 42 59	/* i2c, serial0, spi */
+			47 63 62 	/* gpio, tdm */
+			20 21 22 23	/* dma */
+			03 02 		/* mdio */
+			35 36 40	/* enet1-queue-group0 */
+			51 52 67	/* enet1-queue-group1 */
+			31 32 33	/* enet2-queue-group0 */
+			25 26 27	/* enet2-queue-group1 */
+			28 72 58 	/* usb, sdhci, crypto */
+			0xb0 0xb1 0xb2	/* message */
+			0xb3 0xb4 0xb5
+			0xb6 0xb7
+			0xe0 0xe1 0xe2	/* msi */
+			0xe3 0xe4 0xe5
+			0xe6 0xe7		/* sdhci, crypto , pci */
+			>;
+		};
+
+		msi@41600 {
+			status = "disabled";
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
+		};
+
+	};
+
+	pci0: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe0a000 {
+		status = "disabled";
+	};
+};

arch/powerpc/boot/dts/p1020si.dtsi

@@ -0,0 +1,377 @@
+/*
+ * P1020si Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P1020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+
+		};
+
+		enet0: ethernet@b0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@b1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@b2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+		};
+
+		/* USB2 is shared with localbus, so it must be disabled
+		   by default. We can't put 'status = "disabled";' here
+		   since U-Boot doesn't clear the status property when
+		   it enables USB2. OTOH, U-Boot does create a new node
+		   when there isn't any. So, just comment it out.
+		usb@23000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+		*/
+
+		sdhci@2e000 {
+			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1020-guts","fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+	};
+};

arch/powerpc/boot/dts/p1022ds.dts

@@ -52,7 +52,7 @@
 		#size-cells = <1>;
 		compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
 		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
+		interrupts = <19 2 0 0>;
 
 		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
 			  0x1 0x0 0xf 0xe0000000 0x08000000
@@ -157,7 +157,7 @@
 			 * IRQ8 is generated if the "EVENT" switch is pressed
 			 * and PX_CTL[EVESEL] is set to 00.
 			 */
-			interrupts = <8 8>;
+			interrupts = <8 8 0 0>;
 		};
 	};
 
@@ -178,13 +178,13 @@
 		ecm@1000 {
 			compatible = "fsl,p1022-ecm", "fsl,ecm";
 			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
+			interrupts = <16 2 0 0>;
 		};
 
 		memory-controller@2000 {
 			compatible = "fsl,p1022-memory-controller";
 			reg = <0x2000 0x1000>;
-			interrupts = <16 2>;
+			interrupts = <16 2 0 0>;
 		};
 
 		i2c@3000 {
@@ -193,7 +193,7 @@
 			cell-index = <0>;
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
+			interrupts = <43 2 0 0>;
 			dfsrr;
 		};
 
@@ -203,7 +203,7 @@
 			cell-index = <1>;
 			compatible = "fsl-i2c";
 			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
+			interrupts = <43 2 0 0>;
 			dfsrr;
 
 			wm8776:codec@1a {
@@ -220,7 +220,7 @@
 			compatible = "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <42 2>;
+			interrupts = <42 2 0 0>;
 		};
 
 		serial1: serial@4600 {
@@ -229,7 +229,7 @@
 			compatible = "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <42 2>;
+			interrupts = <42 2 0 0>;
 		};
 
 		spi@7000 {
@@ -238,7 +238,7 @@
 			#size-cells = <0>;
 			compatible = "fsl,espi";
 			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
+			interrupts = <59 0x2 0 0>;
 			espi,num-ss-bits = <4>;
 			mode = "cpu";
 
@@ -275,7 +275,7 @@
 			compatible = "fsl,mpc8610-ssi";
 			cell-index = <0>;
 			reg = <0x15000 0x100>;
-			interrupts = <75 2>;
+			interrupts = <75 2 0 0>;
 			fsl,mode = "i2s-slave";
 			codec-handle = <&wm8776>;
 			fsl,playback-dma = <&dma00>;
@@ -294,25 +294,25 @@
 				compatible = "fsl,ssi-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
-				interrupts = <76 2>;
+				interrupts = <76 2 0 0>;
 			};
 			dma01: dma-channel@80 {
 				compatible = "fsl,ssi-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
-				interrupts = <77 2>;
+				interrupts = <77 2 0 0>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
-				interrupts = <78 2>;
+				interrupts = <78 2 0 0>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
-				interrupts = <79 2>;
+				interrupts = <79 2 0 0>;
 			};
 		};
 
@@ -320,7 +320,7 @@
 			#gpio-cells = <2>;
 			compatible = "fsl,mpc8572-gpio";
 			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
+			interrupts = <47 0x2 0 0>;
 			gpio-controller;
 		};
 
@@ -329,7 +329,7 @@
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>; // L2, 256K
-			interrupts = <16 2>;
+			interrupts = <16 2 0 0>;
 		};
 
 		dma@21300 {
@@ -343,25 +343,25 @@
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
-				interrupts = <20 2>;
+				interrupts = <20 2 0 0>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
-				interrupts = <21 2>;
+				interrupts = <21 2 0 0>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
-				interrupts = <22 2>;
+				interrupts = <22 2 0 0>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
-				interrupts = <23 2>;
+				interrupts = <23 2 0 0>;
 			};
 		};
 
@@ -370,7 +370,7 @@
 			#size-cells = <0>;
 			compatible = "fsl-usb2-dr";
 			reg = <0x22000 0x1000>;
-			interrupts = <28 0x2>;
+			interrupts = <28 0x2 0 0>;
 			phy_type = "ulpi";
 		};
 
@@ -381,11 +381,11 @@
 			reg = <0x24000 0x1000 0xb0030 0x4>;
 
 			phy0: ethernet-phy@0 {
-				interrupts = <3 1>;
+				interrupts = <3 1 0 0>;
 				reg = <0x1>;
 			};
 			phy1: ethernet-phy@1 {
-				interrupts = <9 1>;
+				interrupts = <9 1 0 0>;
 				reg = <0x2>;
 			};
 		};
@@ -416,13 +416,13 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB0000 0x1000>;
-				interrupts = <29 2 30 2 34 2>;
+				interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
 			};
 			queue-group@1{
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB4000 0x1000>;
-				interrupts = <17 2 18 2 24 2>;
+				interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
 			};
 		};
 
@@ -443,20 +443,20 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB1000 0x1000>;
-				interrupts = <35 2 36 2 40 2>;
+				interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
 			};
 			queue-group@1{
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB5000 0x1000>;
-				interrupts = <51 2 52 2 67 2>;
+				interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
 			};
 		};
 
 		sdhci@2e000 {
 			compatible = "fsl,p1022-esdhc", "fsl,esdhc";
 			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
+			interrupts = <72 0x2 0 0>;
 			fsl,sdhci-auto-cmd12;
 			/* Filled in by U-Boot */
 			clock-frequency = <0>;
@@ -467,7 +467,7 @@
 				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
 				     "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
+			interrupts = <45 2 0 0 58 2 0 0>;
 			fsl,num-channels = <4>;
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x97c>;
@@ -478,14 +478,14 @@
 			compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
 			reg = <0x18000 0x1000>;
 			cell-index = <1>;
-			interrupts = <74 0x2>;
+			interrupts = <74 0x2 0 0>;
 		};
 
 		sata@19000 {
 			compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
 			reg = <0x19000 0x1000>;
 			cell-index = <2>;
-			interrupts = <41 0x2>;
+			interrupts = <41 0x2 0 0>;
 		};
 
 		power@e0070{
@@ -496,21 +496,33 @@
 		display@10000 {
 			compatible = "fsl,diu", "fsl,p1022-diu";
 			reg = <0x10000 1000>;
-			interrupts = <64 2>;
+			interrupts = <64 2 0 0>;
 		};
 
 		timer@41100 {
 			compatible = "fsl,mpic-global-timer";
-			reg = <0x41100 0x204>;
-			interrupts = <0xf7 0x2>;
+			reg = <0x41100 0x100 0x41300 4>;
+			interrupts = <0 0 3 0
+			              1 0 3 0
+			              2 0 3 0
+			              3 0 3 0>;
+		};
+
+		timer@42100 {
+			compatible = "fsl,mpic-global-timer";
+			reg = <0x42100 0x100 0x42300 4>;
+			interrupts = <4 0 3 0
+			              5 0 3 0
+			              6 0 3 0
+			              7 0 3 0>;
 		};
 
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <4>;
 			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
+			compatible = "fsl,mpic";
 			device_type = "open-pic";
 		};
 
@@ -519,14 +531,14 @@
 			reg = <0x41600 0x80>;
 			msi-available-ranges = <0 0x100>;
 			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
+				0xe0 0 0 0
+				0xe1 0 0 0
+				0xe2 0 0 0
+				0xe3 0 0 0
+				0xe4 0 0 0
+				0xe5 0 0 0
+				0xe6 0 0 0
+				0xe7 0 0 0>;
 		};
 
 		global-utilities@e0000 {	//global utilities block
@@ -547,7 +559,7 @@
 		ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
 		clock-frequency = <33333333>;
-		interrupts = <16 2>;
+		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -582,7 +594,7 @@
 		ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
 		clock-frequency = <33333333>;
-		interrupts = <16 2>;
+		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -618,7 +630,7 @@
 		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
 		clock-frequency = <33333333>;
-		interrupts = <16 2>;
+		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */

arch/powerpc/boot/dts/p2020ds.dts

@@ -1,7 +1,7 @@
 /*
  * P2020 DS Device Tree Source
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,12 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020DS";
 	compatible = "fsl,P2020DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -27,35 +26,13 @@
 		pci2 = &pci2;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P2020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
 
 	memory {
 		device_type = "memory";
 	};
 
 	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
 		compatible = "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
 		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
 			  0x1 0x0 0x0 0xe0000000 0x08000000
 			  0x2 0x0 0x0 0xffa00000 0x00040000
@@ -158,352 +135,77 @@
 	};
 
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0 0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p2020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p2020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
 
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		spi@7000 {
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
+		usb@22000 {
+			phy_type = "ulpi";
 		};
 
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
+				interrupts = <3 1>;
+				reg = <0x0>;
 			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
+			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
+				interrupts = <3 1>;
+				reg = <0x1>;
 			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
+			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
+				interrupts = <3 1>;
+				reg = <0x2>;
 			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
-		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
 		};
 
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p2020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>; // L2, 512k
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
 
-		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-			phy_type = "ulpi";
 		};
 
 		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x2>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
 		};
 
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
 		};
 
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
 
 		msi@41600 {
 			compatible = "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
 		};
 	};
 
 	pci0: pcie@ffe08000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe08000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -528,18 +230,8 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
 		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -667,18 +359,8 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */

arch/powerpc/boot/dts/p2020rdb.dts

@@ -9,12 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -26,34 +25,11 @@
 		pci1 = &pci1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P2020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
 	memory {
 		device_type = "memory";
 	};
 
 	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		/* NOR and NAND Flashes */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -165,90 +141,16 @@
 	};
 
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p2020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p2020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
+	spi@7000 {
 
-		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
-
-			fsl_m25p80@0 {
+		fsl_m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,espi-flash";
@@ -294,254 +196,68 @@
 			};
 		};
 
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p2020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>; // L2,512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
+		usb@22000 {
+			phy_type = "ulpi";
 		};
 
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
+				interrupts = <3 1>;
+				reg = <0x0>;
+				};
+			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
+				interrupts = <3 1>;
+				reg = <0x1>;
+				};
+		};
+
+		mdio@25520 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
-		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-			phy_type = "ulpi";
+		mdio@26520 {
+			status = "disabled";
 		};
 
 		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x1>;
-				};
-			};
 		};
 
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
 		};
 
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
 
-		sdhci@2e000 {
-			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
+	};
 
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
+	pci0: pcie@ffe08000 {
+		status = "disabled";
 	};
 
-	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
+	pci1: pcie@ffe09000 {
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		pcie@0 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+			pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -556,19 +272,17 @@
 		};
 	};
 
-	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
+	pci2: pcie@ffe0a000 {
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;

arch/powerpc/boot/dts/p2020rdb_camp_core0.dts

@@ -14,12 +14,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet1 = &enet1;
@@ -29,91 +28,33 @@
 	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
+		PowerPC,P2020@1 {
+		status = "disabled";
 		};
+
 	};
 
 	memory {
 		device_type = "memory";
 	};
 
-	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p2020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p2020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
+	localbus@ffe05000 {
+		status = "disabled";
+	};
 
+	soc@ffe00000 {
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
+		serial1: serial@4600 {
+			status = "disabled";
 		};
 
 		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
 
 			fsl_m25p80@0 {
 				#address-cells = <1>;
@@ -161,76 +102,15 @@
 			};
 		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p2020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>; // L2,512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
+		dma@c300 {
+			status = "disabled";
 		};
 
 		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
 			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
@@ -245,29 +125,21 @@
 		};
 
 		mdio@25520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-tbi";
-			reg = <0x26520 0x20>;
-
 			tbi0: tbi-phy@11 {
 				reg = <0x11>;
 				device_type = "tbi-phy";
 			};
 		};
 
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@24000 {
+			status = "disabled";
+		};
+
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "sgmii";
@@ -275,49 +147,12 @@
 		};
 
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
 
-		sdhci@2e000 {
-			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
 
 		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
 			protected-sources = <
 			42 76 77 78 79 /* serial1 , dma2 */
 			29 30 34 26 /* enet0, pci1 */
@@ -326,26 +161,28 @@
 			>;
 		};
 
-		global-utilities@e0000 {
-			compatible = "fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
+		msi@41600 {
+			status = "disabled";
 		};
+
+
 	};
 
-	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
+	pci0: pcie@ffe08000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
@@ -360,4 +197,8 @@
 				  0x0 0x100000>;
 		};
 	};
+
+	pci2: pcie@ffe0a000 {
+		status = "disabled";
+	};
 };

arch/powerpc/boot/dts/p2020rdb_camp_core1.dts

@@ -15,27 +15,21 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
-		serial0 = &serial0;
+		serial0 = &serial1;
 		pci1 = &pci1;
 	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
+		PowerPC,P2020@0 {
+		status = "disabled";
 		};
 	};
 
@@ -43,20 +37,37 @@
 		device_type = "memory";
 	};
 
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		serial0: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
+		ecm-law@0 {
+			status = "disabled";
+		};
+
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
 		};
 
 		dma@c300 {
@@ -96,6 +107,10 @@
 			};
 		};
 
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
 		L2: l2-cache-controller@20000 {
 			compatible = "fsl,p2020-l2-cache-controller";
 			reg = <0x20000 0x1000>;
@@ -104,31 +119,49 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		dma@21300 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		mdio@24520 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
 
 		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
 
 		};
 
+		enet1: ethernet@25000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@26000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		crypto@30000 {
+			status = "disabled";
+		};
+
 		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
 			protected-sources = <
 			17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
 			16 20 21 22 23 28 	/* L2, dma1, USB */
@@ -152,21 +185,32 @@
 				0xe7 0>;
 			interrupt-parent = <&mpic>;
 		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
+		};
+
 	};
 
-	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
+	pci0: pcie@ffe08000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe0a000 {
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;

arch/powerpc/boot/dts/p2020si.dtsi

@@ -0,0 +1,382 @@
+/*
+ * P2020 Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P2020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2,512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x520 0x20>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe08000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+	};
+
+	pci1: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+	};
+
+	pci2: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+	};
+};

arch/powerpc/boot/epapr.c

@@ -0,0 +1,66 @@
+/*
+ * Bootwrapper for ePAPR compliant firmwares
+ *
+ * Copyright 2010 David Gibson <david@gibson.dropbear.id.au>, IBM Corporation.
+ *
+ * Based on earlier bootwrappers by:
+ * (c) Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp,\
+ *   and
+ * Scott Wood <scottwood@freescale.com>
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "io.h"
+#include <libfdt.h>
+
+BSS_STACK(4096);
+
+#define EPAPR_SMAGIC	0x65504150
+#define EPAPR_EMAGIC	0x45504150
+
+static unsigned epapr_magic;
+static unsigned long ima_size;
+static unsigned long fdt_addr;
+
+static void platform_fixups(void)
+{
+	if ((epapr_magic != EPAPR_EMAGIC)
+	    && (epapr_magic != EPAPR_SMAGIC))
+		fatal("r6 contained 0x%08x instead of ePAPR magic number\n",
+		      epapr_magic);
+
+	if (ima_size < (unsigned long)_end)
+		printf("WARNING: Image loaded outside IMA!"
+		       " (_end=%p, ima_size=0x%lx)\n", _end, ima_size);
+	if (ima_size < fdt_addr)
+		printf("WARNING: Device tree address is outside IMA!"
+		       "(fdt_addr=0x%lx, ima_size=0x%lx)\n", fdt_addr,
+		       ima_size);
+	if (ima_size < fdt_addr + fdt_totalsize((void *)fdt_addr))
+		printf("WARNING: Device tree extends outside IMA!"
+		       " (fdt_addr=0x%lx, size=0x%x, ima_size=0x%lx\n",
+		       fdt_addr, fdt_totalsize((void *)fdt_addr), ima_size);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	epapr_magic = r6;
+	ima_size = r7;
+	fdt_addr = r3;
+
+	/* FIXME: we should process reserve entries */
+
+	simple_alloc_init(_end, ima_size - (unsigned long)_end, 32, 64);
+
+	fdt_init((void *)fdt_addr);
+
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+}

arch/powerpc/boot/wrapper

@@ -39,6 +39,7 @@ dts=
 cacheit=
 binary=
 gzip=.gz
+pie=
 
 # cross-compilation prefix
 CROSS=
@@ -157,9 +158,10 @@ pmac|chrp)
     platformo=$object/of.o
     ;;
 coff)
-    platformo=$object/of.o
+    platformo="$object/crt0.o $object/of.o"
     lds=$object/zImage.coff.lds
     link_address='0x500000'
+    pie=
     ;;
 miboot|uboot)
     # miboot and U-boot want just the bare bits, not an ELF binary
@@ -208,6 +210,7 @@ ps3)
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
     link_address=''
+    pie=
     ;;
 ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
@@ -244,6 +247,10 @@ gamecube|wii)
 treeboot-iss4xx-mpic)
     platformo="$object/treeboot-iss4xx.o"
     ;;
+epapr)
+    link_address='0x20000000'
+    pie=-pie
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -251,7 +258,7 @@ if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
     ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
 
     if [ -n "$gzip" ]; then
-        gzip -f -9 "$vmz.$$"
+        gzip -n -f -9 "$vmz.$$"
     fi
 
     if [ -n "$cacheit" ]; then
@@ -310,9 +317,9 @@ fi
 
 if [ "$platform" != "miboot" ]; then
     if [ -n "$link_address" ] ; then
-        text_start="-Ttext $link_address --defsym _start=$link_address"
+        text_start="-Ttext $link_address"
     fi
-    ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
+    ${CROSS}ld -m elf32ppc -T $lds $text_start $pie -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi
@@ -336,7 +343,7 @@ coff)
     $objbin/hack-coff "$ofile"
     ;;
 cuboot*)
-    gzip -f -9 "$ofile"
+    gzip -n -f -9 "$ofile"
     ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
             $uboot_version -d "$ofile".gz "$ofile"
     ;;
@@ -383,6 +390,6 @@ ps3)
 
     odir="$(dirname "$ofile.bin")"
     rm -f "$odir/otheros.bld"
-    gzip --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
+    gzip -n --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
     ;;
 esac

arch/powerpc/boot/zImage.coff.lds.S

@@ -3,13 +3,13 @@ ENTRY(_zimage_start_opd)
 EXTERN(_zimage_start_opd)
 SECTIONS
 {
-  _start = .;
   .text      :
   {
+    _start = .;
     *(.text)
     *(.fixup)
+    _etext = .;
   }
-  _etext = .;
   . = ALIGN(4096);
   .data    :
   {
@@ -17,9 +17,7 @@ SECTIONS
     *(.data*)
     *(__builtin_*)
     *(.sdata*)
-    __got2_start = .;
     *(.got2)
-    __got2_end = .;
 
     _dtb_start = .;
     *(.kernel:dtb)

arch/powerpc/boot/zImage.lds.S

@@ -3,49 +3,64 @@ ENTRY(_zimage_start)
 EXTERN(_zimage_start)
 SECTIONS
 {
-  _start = .;
   .text      :
   {
+    _start = .;
     *(.text)
     *(.fixup)
+    _etext = .;
   }
-  _etext = .;
   . = ALIGN(4096);
   .data    :
   {
     *(.rodata*)
     *(.data*)
     *(.sdata*)
-    __got2_start = .;
     *(.got2)
-    __got2_end = .;
   }
+  .dynsym : { *(.dynsym) }
+  .dynstr : { *(.dynstr) }
+  .dynamic :
+  {
+    __dynamic_start = .;
+    *(.dynamic)
+  }
+  .hash : { *(.hash) }
+  .interp : { *(.interp) }
+  .rela.dyn : { *(.rela*) }
 
   . = ALIGN(8);
-  _dtb_start = .;
-  .kernel:dtb : { *(.kernel:dtb) }
-  _dtb_end = .;
-
-  . = ALIGN(4096);
-  _vmlinux_start =  .;
-  .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) }
-  _vmlinux_end =  .;
+  .kernel:dtb :
+  {
+    _dtb_start = .;
+    *(.kernel:dtb)
+    _dtb_end = .;
+  }
 
   . = ALIGN(4096);
-  _initrd_start =  .;
-  .kernel:initrd : { *(.kernel:initrd) }
-  _initrd_end =  .;
+  .kernel:vmlinux.strip :
+  {
+    _vmlinux_start =  .;
+    *(.kernel:vmlinux.strip)
+    _vmlinux_end =  .;
+  }
 
   . = ALIGN(4096);
-  _edata  =  .;
+  .kernel:initrd :
+  {
+    _initrd_start =  .;
+    *(.kernel:initrd)
+    _initrd_end =  .;
+  }
 
   . = ALIGN(4096);
-  __bss_start = .;
   .bss       :
   {
-   *(.sbss)
-   *(.bss)
+    _edata  =  .;
+    __bss_start = .;
+    *(.sbss)
+    *(.bss)
+    *(COMMON)
+    _end = . ;
   }
-  . = ALIGN(4096);
-  _end = . ;
 }

arch/powerpc/configs/83xx/mpc8313_rdb_defconfig

@@ -104,7 +104,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_PCBC=m

arch/powerpc/configs/83xx/mpc8315_rdb_defconfig

@@ -101,7 +101,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_PCBC=m

arch/powerpc/configs/85xx/mpc8540_ads_defconfig

@@ -58,7 +58,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/85xx/mpc8560_ads_defconfig

@@ -59,7 +59,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/85xx/mpc85xx_cds_defconfig

@@ -63,7 +63,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig

@@ -168,7 +168,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/c2k_defconfig

@@ -132,8 +132,8 @@ CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_IND=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m

arch/powerpc/configs/e55xx_smp_defconfig

@@ -6,10 +6,10 @@ CONFIG_NR_CPUS=2
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
@@ -25,8 +25,32 @@ CONFIG_P5020_DS=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
-CONFIG_SPARSE_IRQ=y
 # CONFIG_PCI is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_INET_ESP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
@@ -34,6 +58,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_NET_ETHERNET=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -64,22 +91,14 @@ CONFIG_NLS=y
 CONFIG_NLS_UTF8=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
-CONFIG_LIBCRC32C=m
 CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_TALITOS=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -204,7 +204,6 @@ CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -206,7 +206,6 @@ CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/mpc86xx_defconfig

@@ -171,7 +171,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/pmac32_defconfig

@@ -112,8 +112,8 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
 CONFIG_IRTTY_SIR=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m

arch/powerpc/configs/ppc6xx_defconfig

@@ -351,8 +351,8 @@ CONFIG_VLSI_FIR=m
 CONFIG_VIA_FIR=m
 CONFIG_MCS_FIR=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m

arch/powerpc/configs/ps3_defconfig

@@ -52,8 +52,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m

arch/powerpc/configs/pseries_defconfig

@@ -146,12 +146,18 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_BE2ISCSI=m
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_LPFC=m
 CONFIG_ATA=y
 # CONFIG_ATA_SFF is not set
@@ -197,6 +203,8 @@ CONFIG_S2IO=m
 CONFIG_MYRI10GE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_MLX4_EN=m
+CONFIG_QLGE=m
+CONFIG_BE2NET=m
 CONFIG_PPP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m

arch/powerpc/include/asm/cputable.h

@@ -157,6 +157,7 @@ extern const char *powerpc_base_platform;
 #define CPU_FTR_476_DD2			ASM_CONST(0x0000000000010000)
 #define CPU_FTR_NEED_COHERENT		ASM_CONST(0x0000000000020000)
 #define CPU_FTR_NO_BTIC			ASM_CONST(0x0000000000040000)
+#define CPU_FTR_DEBUG_LVL_EXC		ASM_CONST(0x0000000000080000)
 #define CPU_FTR_NODSISRALIGN		ASM_CONST(0x0000000000100000)
 #define CPU_FTR_PPC_LE			ASM_CONST(0x0000000000200000)
 #define CPU_FTR_REAL_LE			ASM_CONST(0x0000000000400000)
@@ -178,22 +179,18 @@ extern const char *powerpc_base_platform;
 #define LONG_ASM_CONST(x)		0
 #endif
 
-#define CPU_FTR_SLB			LONG_ASM_CONST(0x0000000100000000)
-#define CPU_FTR_16M_PAGE		LONG_ASM_CONST(0x0000000200000000)
-#define CPU_FTR_TLBIEL			LONG_ASM_CONST(0x0000000400000000)
+
+#define CPU_FTR_HVMODE_206		LONG_ASM_CONST(0x0000000800000000)
+#define CPU_FTR_CFAR			LONG_ASM_CONST(0x0000001000000000)
 #define CPU_FTR_IABR			LONG_ASM_CONST(0x0000002000000000)
 #define CPU_FTR_MMCRA			LONG_ASM_CONST(0x0000004000000000)
 #define CPU_FTR_CTRL			LONG_ASM_CONST(0x0000008000000000)
 #define CPU_FTR_SMT			LONG_ASM_CONST(0x0000010000000000)
-#define CPU_FTR_LOCKLESS_TLBIE		LONG_ASM_CONST(0x0000040000000000)
-#define CPU_FTR_CI_LARGE_PAGE		LONG_ASM_CONST(0x0000100000000000)
 #define CPU_FTR_PAUSE_ZERO		LONG_ASM_CONST(0x0000200000000000)
 #define CPU_FTR_PURR			LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_CELL_TB_BUG		LONG_ASM_CONST(0x0000800000000000)
 #define CPU_FTR_SPURR			LONG_ASM_CONST(0x0001000000000000)
 #define CPU_FTR_DSCR			LONG_ASM_CONST(0x0002000000000000)
-#define CPU_FTR_1T_SEGMENT		LONG_ASM_CONST(0x0004000000000000)
-#define CPU_FTR_NO_SLBIE_B		LONG_ASM_CONST(0x0008000000000000)
 #define CPU_FTR_VSX			LONG_ASM_CONST(0x0010000000000000)
 #define CPU_FTR_SAO			LONG_ASM_CONST(0x0020000000000000)
 #define CPU_FTR_CP_USE_DCBTZ		LONG_ASM_CONST(0x0040000000000000)
@@ -202,12 +199,14 @@ extern const char *powerpc_base_platform;
 #define CPU_FTR_STCX_CHECKS_ADDRESS	LONG_ASM_CONST(0x0200000000000000)
 #define CPU_FTR_POPCNTB			LONG_ASM_CONST(0x0400000000000000)
 #define CPU_FTR_POPCNTD			LONG_ASM_CONST(0x0800000000000000)
+#define CPU_FTR_ICSWX			LONG_ASM_CONST(0x1000000000000000)
 
 #ifndef __ASSEMBLY__
 
-#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_SLB | \
-				 CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
-				 CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
+#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+
+#define MMU_FTR_PPCAS_ARCH_V2 	(MMU_FTR_SLB | MMU_FTR_TLBIEL | \
+				 MMU_FTR_16M_PAGE)
 
 /* We only set the altivec features if the kernel was compiled with altivec
  * support
@@ -387,7 +386,8 @@ extern const char *powerpc_base_platform;
 	    CPU_FTR_DBELL)
 #define CPU_FTRS_E5500	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
-	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD)
+	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_DEBUG_LVL_EXC)
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */
@@ -407,44 +407,45 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_POWER5	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-	    CPU_FTR_PURR | CPU_FTR_STCX_CHECKS_ADDRESS | \
-	    CPU_FTR_POPCNTB)
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
 #define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_COHERENT_ICACHE | \
 	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
 	    CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \
-	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR)
 #define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_HVMODE_206 |\
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_COHERENT_ICACHE | \
 	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
 	    CPU_FTR_DSCR | CPU_FTR_SAO  | CPU_FTR_ASYM_SMT | \
-	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD)
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_ICSWX | CPU_FTR_CFAR)
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | \
-	    CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
+	    CPU_FTR_PAUSE_ZERO  | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
 	    CPU_FTR_UNALIGNED_LD_STD)
 #define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_PPCAS_ARCH_V2 | \
-	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
-	    CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_PURR | CPU_FTR_REAL_LE)
 #define CPU_FTRS_COMPATIBLE	(CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
 
+#define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
+		     CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_BOOK3E
-#define CPU_FTRS_POSSIBLE	(CPU_FTRS_E5500)
+#define CPU_FTRS_POSSIBLE	(CPU_FTRS_E5500 | CPU_FTRS_A2)
 #else
 #define CPU_FTRS_POSSIBLE	\
 	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
 	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
 	    CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |		\
-	    CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
+	    CPU_FTR_VSX)
 #endif
 #else
 enum {
@@ -487,7 +488,7 @@ enum {
 
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_BOOK3E
-#define CPU_FTRS_ALWAYS		(CPU_FTRS_E5500)
+#define CPU_FTRS_ALWAYS		(CPU_FTRS_E5500 & CPU_FTRS_A2)
 #else
 #define CPU_FTRS_ALWAYS		\
 	    (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &	\

arch/powerpc/include/asm/cputhreads.h

@@ -37,16 +37,16 @@ extern cpumask_t threads_core_mask;
  * This can typically be used for things like IPI for tlb invalidations
  * since those need to be done only once per core/TLB
  */
-static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
+static inline cpumask_t cpu_thread_mask_to_cores(const struct cpumask *threads)
 {
 	cpumask_t	tmp, res;
 	int		i;
 
-	res = CPU_MASK_NONE;
+	cpumask_clear(&res);
 	for (i = 0; i < NR_CPUS; i += threads_per_core) {
-		cpus_shift_left(tmp, threads_core_mask, i);
-		if (cpus_intersects(threads, tmp))
-			cpu_set(i, res);
+		cpumask_shift_left(&tmp, &threads_core_mask, i);
+		if (cpumask_intersects(threads, &tmp))
+			cpumask_set_cpu(i, &res);
 	}
 	return res;
 }
@@ -58,7 +58,7 @@ static inline int cpu_nr_cores(void)
 
 static inline cpumask_t cpu_online_cores_map(void)
 {
-	return cpu_thread_mask_to_cores(cpu_online_map);
+	return cpu_thread_mask_to_cores(cpu_online_mask);
 }
 
 #ifdef CONFIG_SMP

arch/powerpc/include/asm/dbell.h

@@ -27,9 +27,8 @@ enum ppc_dbell {
 	PPC_G_DBELL_MC = 4,	/* guest mcheck doorbell */
 };
 
-extern void doorbell_message_pass(int target, int msg);
+extern void doorbell_cause_ipi(int cpu, unsigned long data);
 extern void doorbell_exception(struct pt_regs *regs);
-extern void doorbell_check_self(void);
 extern void doorbell_setup_this_cpu(void);
 
 static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)

arch/powerpc/include/asm/emulated_ops.h

@@ -52,6 +52,10 @@ extern struct ppc_emulated {
 #ifdef CONFIG_VSX
 	struct ppc_emulated_entry vsx;
 #endif
+#ifdef CONFIG_PPC64
+	struct ppc_emulated_entry mfdscr;
+	struct ppc_emulated_entry mtdscr;
+#endif
 } ppc_emulated;
 
 extern u32 ppc_warn_emulated;

arch/powerpc/include/asm/exception-64s.h

@@ -46,6 +46,7 @@
 #define EX_CCR		60
 #define EX_R3		64
 #define EX_LR		72
+#define EX_CFAR		80
 
 /*
  * We're short on space and time in the exception prolog, so we can't
@@ -56,30 +57,40 @@
 #define LOAD_HANDLER(reg, label)					\
 	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
 
-#define EXCEPTION_PROLOG_1(area)				\
-	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
+/* Exception register prefixes */
+#define EXC_HV	H
+#define EXC_STD
+
+#define EXCEPTION_PROLOG_1(area)					\
+	GET_PACA(r13);							\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
 	std	r10,area+EX_R10(r13);					\
 	std	r11,area+EX_R11(r13);					\
 	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG_SCRATCH0;					\
+	BEGIN_FTR_SECTION_NESTED(66);					\
+	mfspr	r10,SPRN_CFAR;						\
+	std	r10,area+EX_CFAR(r13);					\
+	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		\
+	GET_SCRATCH0(r9);						\
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9
 
-#define EXCEPTION_PROLOG_PSERIES_1(label)				\
+#define __EXCEPTION_PROLOG_PSERIES_1(label, h)				\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label)						\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
+	mtspr	SPRN_##h##SRR0,r12;					\
+	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
+	mtspr	SPRN_##h##SRR1,r10;					\
+	h##rfid;							\
 	b	.	/* prevent speculative execution */
+#define EXCEPTION_PROLOG_PSERIES_1(label, h) \
+	__EXCEPTION_PROLOG_PSERIES_1(label, h)
 
-#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+#define EXCEPTION_PROLOG_PSERIES(area, label, h)			\
 	EXCEPTION_PROLOG_1(area);					\
-	EXCEPTION_PROLOG_PSERIES_1(label);
+	EXCEPTION_PROLOG_PSERIES_1(label, h);
 
 /*
  * The common exception prolog is used for all except a few exceptions
@@ -98,10 +109,11 @@
 	beq-	1f;							   \
 	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
 1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
-	bge-	cr1,2f;			/* abort if it is		*/ \
-	b	3f;							   \
-2:	li	r1,(n);			/* will be reloaded later	*/ \
+	blt+	cr1,3f;			/* abort if it is		*/ \
+	li	r1,(n);			/* will be reloaded later	*/ \
 	sth	r1,PACA_TRAP_SAVE(r13);					   \
+	std	r3,area+EX_R3(r13);					   \
+	addi	r3,r13,area;		/* r3 -> where regs are saved*/	   \
 	b	bad_stack;						   \
 3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
 	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
@@ -123,6 +135,10 @@
 	std	r9,GPR11(r1);						   \
 	std	r10,GPR12(r1);						   \
 	std	r11,GPR13(r1);						   \
+	BEGIN_FTR_SECTION_NESTED(66);					   \
+	ld	r10,area+EX_CFAR(r13);					   \
+	std	r10,ORIG_GPR3(r1);					   \
+	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		   \
 	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
 	mflr	r9;			/* save LR in stackframe	*/ \
 	std	r9,_LINK(r1);						   \
@@ -143,57 +159,62 @@
 /*
  * Exception vectors.
  */
-#define STD_EXCEPTION_PSERIES(n, label)			\
-	. = n;						\
+#define STD_EXCEPTION_PSERIES(loc, vec, label)		\
+	. = loc;					\
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
-	DO_KVM	n;					\
-	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+	DO_KVM	vec;					\
+	SET_SCRATCH0(r13);		/* save r13 */		\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, EXC_STD)
 
-#define HSTD_EXCEPTION_PSERIES(n, label)		\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
+#define STD_EXCEPTION_HV(loc, vec, label)		\
+	. = loc;					\
+	.globl label##_hv;				\
+label##_hv:						\
 	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG_SCRATCH0,r20;	/* save r20 */	\
-	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR0,r20;				\
-	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR1,r20;				\
-	mfspr	r20,SPRN_SPRG_SCRATCH0;	/* restore r20 */ \
-	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+	DO_KVM	vec;					\
+	SET_SCRATCH0(r13);	/* save r13 */		\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, EXC_HV)
 
-
-#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
-	. = n;								\
-	.globl label##_pSeries;						\
-label##_pSeries:							\
+#define __MASKABLE_EXCEPTION_PSERIES(vec, label, h)			\
 	HMT_MEDIUM;							\
-	DO_KVM	n;							\
-	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
-	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
+	DO_KVM	vec;							\
+	SET_SCRATCH0(r13);    /* save r13 */				\
+	GET_PACA(r13);							\
 	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
 	std	r10,PACA_EXGEN+EX_R10(r13);				\
 	lbz	r10,PACASOFTIRQEN(r13);					\
 	mfcr	r9;							\
 	cmpwi	r10,0;							\
-	beq	masked_interrupt;					\
-	mfspr	r10,SPRN_SPRG_SCRATCH0;					\
+	beq	masked_##h##interrupt;					\
+	GET_SCRATCH0(r10);						\
 	std	r10,PACA_EXGEN+EX_R13(r13);				\
 	std	r11,PACA_EXGEN+EX_R11(r13);				\
 	std	r12,PACA_EXGEN+EX_R12(r13);				\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label##_common)				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
+	mtspr	SPRN_##h##SRR0,r12;					\
+	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
+	mtspr	SPRN_##h##SRR1,r10;					\
+	h##rfid;							\
 	b	.	/* prevent speculative execution */
+#define _MASKABLE_EXCEPTION_PSERIES(vec, label, h)			\
+	__MASKABLE_EXCEPTION_PSERIES(vec, label, h)
+
+#define MASKABLE_EXCEPTION_PSERIES(loc, vec, label)			\
+	. = loc;							\
+	.globl label##_pSeries;						\
+label##_pSeries:							\
+	_MASKABLE_EXCEPTION_PSERIES(vec, label, EXC_STD)
+
+#define MASKABLE_EXCEPTION_HV(loc, vec, label)				\
+	. = loc;							\
+	.globl label##_hv;						\
+label##_hv:								\
+	_MASKABLE_EXCEPTION_PSERIES(vec, label, EXC_HV)
 
 #ifdef CONFIG_PPC_ISERIES
 #define DISABLE_INTS				\

arch/powerpc/include/asm/feature-fixups.h

@@ -49,7 +49,7 @@ label##5:							\
 	FTR_ENTRY_OFFSET label##2b-label##5b;			\
 	FTR_ENTRY_OFFSET label##3b-label##5b;			\
 	FTR_ENTRY_OFFSET label##4b-label##5b;			\
-	.ifgt (label##4b-label##3b)-(label##2b-label##1b);	\
+	.ifgt (label##4b- label##3b)-(label##2b- label##1b);	\
 	.error "Feature section else case larger than body";	\
 	.endif;							\
 	.popsection;
@@ -146,6 +146,19 @@ label##5:							\
 
 #ifndef __ASSEMBLY__
 
+#define ASM_FTR_IF(section_if, section_else, msk, val)	\
+	stringify_in_c(BEGIN_FTR_SECTION)			\
+	section_if "; "						\
+	stringify_in_c(FTR_SECTION_ELSE)			\
+	section_else "; "					\
+	stringify_in_c(ALT_FTR_SECTION_END((msk), (val)))
+
+#define ASM_FTR_IFSET(section_if, section_else, msk)	\
+	ASM_FTR_IF(section_if, section_else, (msk), (msk))
+
+#define ASM_FTR_IFCLR(section_if, section_else, msk)	\
+	ASM_FTR_IF(section_if, section_else, (msk), 0)
+
 #define ASM_MMU_FTR_IF(section_if, section_else, msk, val)	\
 	stringify_in_c(BEGIN_MMU_FTR_SECTION)			\
 	section_if "; "						\

arch/powerpc/include/asm/firmware.h

@@ -47,6 +47,7 @@
 #define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
 #define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
 #define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
+#define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
 
 #ifndef __ASSEMBLY__
 
@@ -60,7 +61,7 @@ enum {
 		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
 		FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
 		FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
-		FW_FEATURE_CMO | FW_FEATURE_VPHN,
+		FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
 	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,

arch/powerpc/include/asm/hvcall.h

@@ -102,6 +102,7 @@
 #define H_ANDCOND		(1UL<<(63-33))
 #define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
 #define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_COALESCE_CAND	(1UL<<(63-42))	/* page is a good candidate for coalescing */
 #define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
 #define H_COPY_PAGE		(1UL<<(63-49))
 #define H_N			(1UL<<(63-61))
@@ -234,6 +235,7 @@
 #define H_GET_MPP		0x2D4
 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC
 #define H_BEST_ENERGY		0x2F4
+#define H_GET_MPP_X		0x314
 #define MAX_HCALL_OPCODE	H_BEST_ENERGY
 
 #ifndef __ASSEMBLY__
@@ -312,6 +314,16 @@ struct hvcall_mpp_data {
 
 int h_get_mpp(struct hvcall_mpp_data *);
 
+struct hvcall_mpp_x_data {
+	unsigned long coalesced_bytes;
+	unsigned long pool_coalesced_bytes;
+	unsigned long pool_purr_cycles;
+	unsigned long pool_spurr_cycles;
+	unsigned long reserved[3];
+};
+
+int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data);
+
 #ifdef CONFIG_PPC_PSERIES
 extern int CMO_PrPSP;
 extern int CMO_SecPSP;

arch/powerpc/platforms/cell/io-workarounds.h → arch/powerpc/include/asm/io-workarounds.h

@@ -31,7 +31,6 @@ struct iowa_bus {
 	void   *private;
 };
 
-void __devinit io_workaround_init(void);
 void __devinit iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
 				 int (*)(struct iowa_bus *, void *), void *);
 struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);

arch/powerpc/include/asm/io.h

@@ -2,6 +2,8 @@
 #define _ASM_POWERPC_IO_H
 #ifdef __KERNEL__
 
+#define ARCH_HAS_IOREMAP_WC
+
 /*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -481,10 +483,16 @@ __do_out_asm(_rec_outl, "stwbrx")
 				_memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
 #endif /* !CONFIG_EEH */
 
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define DEF_PCI_HOOK(x)		x
+#ifdef CONFIG_PPC_INDIRECT_PIO
+#define DEF_PCI_HOOK_pio(x)	x
+#else
+#define DEF_PCI_HOOK_pio(x)	NULL
+#endif
+
+#ifdef CONFIG_PPC_INDIRECT_MMIO
+#define DEF_PCI_HOOK_mem(x)	x
 #else
-#define DEF_PCI_HOOK(x)		NULL
+#define DEF_PCI_HOOK_mem(x)	NULL
 #endif
 
 /* Structure containing all the hooks */
@@ -504,7 +512,7 @@ extern struct ppc_pci_io {
 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
 static inline ret name at					\
 {								\
-	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+	if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL)	\
 		return ppc_pci_io.name al;			\
 	return __do_##name al;					\
 }
@@ -512,7 +520,7 @@ static inline ret name at					\
 #define DEF_PCI_AC_NORET(name, at, al, space, aa)		\
 static inline void name at					\
 {								\
-	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+	if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL)		\
 		ppc_pci_io.name al;				\
 	else							\
 		__do_##name al;					\
@@ -616,12 +624,13 @@ static inline void iosync(void)
  * * ioremap is the standard one and provides non-cacheable guarded mappings
  *   and can be hooked by the platform via ppc_md
  *
- * * ioremap_flags allows to specify the page flags as an argument and can
- *   also be hooked by the platform via ppc_md. ioremap_prot is the exact
- *   same thing as ioremap_flags.
+ * * ioremap_prot allows to specify the page flags as an argument and can
+ *   also be hooked by the platform via ppc_md.
  *
  * * ioremap_nocache is identical to ioremap
  *
+ * * ioremap_wc enables write combining
+ *
  * * iounmap undoes such a mapping and can be hooked
  *
  * * __ioremap_at (and the pending __iounmap_at) are low level functions to
@@ -629,7 +638,7 @@ static inline void iosync(void)
  *   currently be hooked. Must be page aligned.
  *
  * * __ioremap is the low level implementation used by ioremap and
- *   ioremap_flags and cannot be hooked (but can be used by a hook on one
+ *   ioremap_prot and cannot be hooked (but can be used by a hook on one
  *   of the previous ones)
  *
  * * __ioremap_caller is the same as above but takes an explicit caller
@@ -640,10 +649,10 @@ static inline void iosync(void)
  *
  */
 extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
-				   unsigned long flags);
+extern void __iomem *ioremap_prot(phys_addr_t address, unsigned long size,
+				  unsigned long flags);
+extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size);
 #define ioremap_nocache(addr, size)	ioremap((addr), (size))
-#define ioremap_prot(addr, size, prot)	ioremap_flags((addr), (size), (prot))
 
 extern void iounmap(volatile void __iomem *addr);
 

arch/powerpc/include/asm/io_event_irq.h

@@ -0,0 +1,54 @@
+/*
+ * Copyright 2010, 2011 Mark Nelson and Tseng-Hui (Frank) Lin, IBM Corporation
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_IO_EVENT_IRQ_H
+#define _ASM_POWERPC_IO_EVENT_IRQ_H
+
+#include <linux/types.h>
+#include <linux/notifier.h>
+
+#define PSERIES_IOEI_RPC_MAX_LEN 216
+
+#define PSERIES_IOEI_TYPE_ERR_DETECTED		0x01
+#define PSERIES_IOEI_TYPE_ERR_RECOVERED		0x02
+#define PSERIES_IOEI_TYPE_EVENT			0x03
+#define PSERIES_IOEI_TYPE_RPC_PASS_THRU		0x04
+
+#define PSERIES_IOEI_SUBTYPE_NOT_APP		0x00
+#define PSERIES_IOEI_SUBTYPE_REBALANCE_REQ	0x01
+#define PSERIES_IOEI_SUBTYPE_NODE_ONLINE	0x03
+#define PSERIES_IOEI_SUBTYPE_NODE_OFFLINE	0x04
+#define PSERIES_IOEI_SUBTYPE_DUMP_SIZE_CHANGE	0x05
+#define PSERIES_IOEI_SUBTYPE_TORRENT_IRV_UPDATE	0x06
+#define PSERIES_IOEI_SUBTYPE_TORRENT_HFI_CFGED	0x07
+
+#define PSERIES_IOEI_SCOPE_NOT_APP		0x00
+#define PSERIES_IOEI_SCOPE_RIO_HUB		0x36
+#define PSERIES_IOEI_SCOPE_RIO_BRIDGE		0x37
+#define PSERIES_IOEI_SCOPE_PHB			0x38
+#define PSERIES_IOEI_SCOPE_EADS_GLOBAL		0x39
+#define PSERIES_IOEI_SCOPE_EADS_SLOT		0x3A
+#define PSERIES_IOEI_SCOPE_TORRENT_HUB		0x3B
+#define PSERIES_IOEI_SCOPE_SERVICE_PROC		0x51
+
+/* Platform Event Log Format, Version 6, data portition of IO event section */
+struct pseries_io_event {
+	uint8_t event_type;		/* 0x00 IO-Event Type		*/
+	uint8_t rpc_data_len;		/* 0x01 RPC data length		*/
+	uint8_t scope;			/* 0x02 Error/Event Scope	*/
+	uint8_t event_subtype;		/* 0x03 I/O-Event Sub-Type	*/
+	uint32_t drc_index;		/* 0x04 DRC Index		*/
+	uint8_t rpc_data[PSERIES_IOEI_RPC_MAX_LEN];
+					/* 0x08 RPC Data (0-216 bytes,	*/
+					/* padded to 4 bytes alignment)	*/
+};
+
+extern struct atomic_notifier_head pseries_ioei_notifier_list;
+
+#endif /* _ASM_POWERPC_IO_EVENT_IRQ_H */

arch/powerpc/include/asm/irq.h

@@ -88,9 +88,6 @@ struct irq_host_ops {
 	/* Dispose of such a mapping */
 	void (*unmap)(struct irq_host *h, unsigned int virq);
 
-	/* Update of such a mapping  */
-	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
 	/* Translate device-tree interrupt specifier from raw format coming
 	 * from the firmware to a irq_hw_number_t (interrupt line number) and
 	 * type (sense) that can be passed to set_irq_type(). In the absence
@@ -128,19 +125,10 @@ struct irq_host {
 	struct device_node	*of_node;
 };
 
-/* The main irq map itself is an array of NR_IRQ entries containing the
- * associate host and irq number. An entry with a host of NULL is free.
- * An entry can be allocated if it's free, the allocator always then sets
- * hwirq first to the host's invalid irq number and then fills ops.
- */
-struct irq_map_entry {
-	irq_hw_number_t	hwirq;
-	struct irq_host	*host;
-};
-
-extern struct irq_map_entry irq_map[NR_IRQS];
-
+struct irq_data;
+extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
 extern irq_hw_number_t virq_to_hw(unsigned int virq);
+extern bool virq_is_host(unsigned int virq, struct irq_host *host);
 
 /**
  * irq_alloc_host - Allocate a new irq_host data structure

arch/powerpc/include/asm/kexec.h

@@ -76,7 +76,7 @@ extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
 extern cpumask_t cpus_in_sr;
 static inline int kexec_sr_activated(int cpu)
 {
-	return cpu_isset(cpu,cpus_in_sr);
+	return cpumask_test_cpu(cpu, &cpus_in_sr);
 }
 
 struct kimage;

arch/powerpc/include/asm/kvm_asm.h

@@ -59,6 +59,7 @@
 #define BOOK3S_INTERRUPT_INST_SEGMENT	0x480
 #define BOOK3S_INTERRUPT_EXTERNAL	0x500
 #define BOOK3S_INTERRUPT_EXTERNAL_LEVEL	0x501
+#define BOOK3S_INTERRUPT_EXTERNAL_HV	0x502
 #define BOOK3S_INTERRUPT_ALIGNMENT	0x600
 #define BOOK3S_INTERRUPT_PROGRAM	0x700
 #define BOOK3S_INTERRUPT_FP_UNAVAIL	0x800

arch/powerpc/include/asm/kvm_book3s_asm.h

@@ -34,6 +34,7 @@
 	    (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
 	    (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
 	    (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
+	    (\intno == BOOK3S_INTERRUPT_EXTERNAL_HV) || \
 	    (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
 	    (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
 	    (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \

arch/powerpc/include/asm/lppaca.h

@@ -210,6 +210,8 @@ struct dtl_entry {
 #define DISPATCH_LOG_BYTES	4096	/* bytes per cpu */
 #define N_DISPATCH_LOG		(DISPATCH_LOG_BYTES / sizeof(struct dtl_entry))
 
+extern struct kmem_cache *dtl_cache;
+
 /*
  * When CONFIG_VIRT_CPU_ACCOUNTING = y, the cpu accounting code controls
  * reading from the dispatch trace log.  If other code wants to consume

arch/powerpc/include/asm/machdep.h

@@ -29,21 +29,6 @@ struct file;
 struct pci_controller;
 struct kimage;
 
-#ifdef CONFIG_SMP
-struct smp_ops_t {
-	void  (*message_pass)(int target, int msg);
-	int   (*probe)(void);
-	void  (*kick_cpu)(int nr);
-	void  (*setup_cpu)(int nr);
-	void  (*bringup_done)(void);
-	void  (*take_timebase)(void);
-	void  (*give_timebase)(void);
-	int   (*cpu_disable)(void);
-	void  (*cpu_die)(unsigned int nr);
-	int   (*cpu_bootable)(unsigned int nr);
-};
-#endif
-
 struct machdep_calls {
 	char		*name;
 #ifdef CONFIG_PPC64
@@ -267,6 +252,7 @@ struct machdep_calls {
 
 extern void e500_idle(void);
 extern void power4_idle(void);
+extern void power7_idle(void);
 extern void ppc6xx_idle(void);
 extern void book3e_idle(void);
 
@@ -311,12 +297,6 @@ extern sys_ctrler_t sys_ctrler;
 
 #endif /* CONFIG_PPC_PMAC */
 
-#ifdef CONFIG_SMP
-/* Poor default implementations */
-extern void __devinit smp_generic_give_timebase(void);
-extern void __devinit smp_generic_take_timebase(void);
-#endif /* CONFIG_SMP */
-
 
 /* Functions to produce codes on the leds.
  * The SRC code should be unique for the message category and should

arch/powerpc/include/asm/mmu-book3e.h

@@ -43,6 +43,7 @@
 #define MAS0_TLBSEL(x)		(((x) << 28) & 0x30000000)
 #define MAS0_ESEL(x)		(((x) << 16) & 0x0FFF0000)
 #define MAS0_NV(x)		((x) & 0x00000FFF)
+#define MAS0_ESEL_MASK		0x0FFF0000
 #define MAS0_HES		0x00004000
 #define MAS0_WQ_ALLWAYS		0x00000000
 #define MAS0_WQ_COND		0x00001000
@@ -137,6 +138,21 @@
 #define MMUCSR0_TLB2PS	0x00078000	/* TLB2 Page Size */
 #define MMUCSR0_TLB3PS	0x00780000	/* TLB3 Page Size */
 
+/* MMUCFG bits */
+#define MMUCFG_MAVN_NASK	0x00000003
+#define MMUCFG_MAVN_V1_0	0x00000000
+#define MMUCFG_MAVN_V2_0	0x00000001
+#define MMUCFG_NTLB_MASK	0x0000000c
+#define MMUCFG_NTLB_SHIFT	2
+#define MMUCFG_PIDSIZE_MASK	0x000007c0
+#define MMUCFG_PIDSIZE_SHIFT	6
+#define MMUCFG_TWC		0x00008000
+#define MMUCFG_LRAT		0x00010000
+#define MMUCFG_RASIZE_MASK	0x00fe0000
+#define MMUCFG_RASIZE_SHIFT	17
+#define MMUCFG_LPIDSIZE_MASK	0x0f000000
+#define MMUCFG_LPIDSIZE_SHIFT	24
+
 /* TLBnCFG encoding */
 #define TLBnCFG_N_ENTRY		0x00000fff	/* number of entries */
 #define TLBnCFG_HES		0x00002000	/* HW select supported */
@@ -229,6 +245,10 @@ extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 extern int mmu_linear_psize;
 extern int mmu_vmemmap_psize;
 
+#ifdef CONFIG_PPC64
+extern unsigned long linear_map_top;
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */

arch/powerpc/include/asm/mmu-hash64.h

@@ -408,6 +408,7 @@ static inline void subpage_prot_init_new_context(struct mm_struct *mm) { }
 #endif /* CONFIG_PPC_SUBPAGE_PROT */
 
 typedef unsigned long mm_context_id_t;
+struct spinlock;
 
 typedef struct {
 	mm_context_id_t id;
@@ -423,6 +424,11 @@ typedef struct {
 #ifdef CONFIG_PPC_SUBPAGE_PROT
 	struct subpage_prot_table spt;
 #endif /* CONFIG_PPC_SUBPAGE_PROT */
+#ifdef CONFIG_PPC_ICSWX
+	struct spinlock *cop_lockp; /* guard acop and cop_pid */
+	unsigned long acop;	/* mask of enabled coprocessor types */
+	unsigned int cop_pid;	/* pid value used with coprocessors */
+#endif /* CONFIG_PPC_ICSWX */
 } mm_context_t;
 
 

arch/powerpc/include/asm/mmu.h

@@ -56,11 +56,6 @@
  */
 #define MMU_FTR_NEED_DTLB_SW_LRU	ASM_CONST(0x00200000)
 
-/* This indicates that the processor uses the ISA 2.06 server tlbie
- * mnemonics
- */
-#define MMU_FTR_TLBIE_206		ASM_CONST(0x00400000)
-
 /* Enable use of TLB reservation.  Processor should support tlbsrx.
  * instruction and MAS0[WQ].
  */
@@ -70,6 +65,53 @@
  */
 #define MMU_FTR_USE_PAIRED_MAS		ASM_CONST(0x01000000)
 
+/* MMU is SLB-based
+ */
+#define MMU_FTR_SLB			ASM_CONST(0x02000000)
+
+/* Support 16M large pages
+ */
+#define MMU_FTR_16M_PAGE		ASM_CONST(0x04000000)
+
+/* Supports TLBIEL variant
+ */
+#define MMU_FTR_TLBIEL			ASM_CONST(0x08000000)
+
+/* Supports tlbies w/o locking
+ */
+#define MMU_FTR_LOCKLESS_TLBIE		ASM_CONST(0x10000000)
+
+/* Large pages can be marked CI
+ */
+#define MMU_FTR_CI_LARGE_PAGE		ASM_CONST(0x20000000)
+
+/* 1T segments available
+ */
+#define MMU_FTR_1T_SEGMENT		ASM_CONST(0x40000000)
+
+/* Doesn't support the B bit (1T segment) in SLBIE
+ */
+#define MMU_FTR_NO_SLBIE_B		ASM_CONST(0x80000000)
+
+/* MMU feature bit sets for various CPUs */
+#define MMU_FTRS_DEFAULT_HPTE_ARCH_V2	\
+	MMU_FTR_HPTE_TABLE | MMU_FTR_PPCAS_ARCH_V2
+#define MMU_FTRS_POWER4		MMU_FTRS_DEFAULT_HPTE_ARCH_V2
+#define MMU_FTRS_PPC970		MMU_FTRS_POWER4
+#define MMU_FTRS_POWER5		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER6		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER7		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_CELL		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
+				MMU_FTR_CI_LARGE_PAGE
+#define MMU_FTRS_PA6T		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
+				MMU_FTR_CI_LARGE_PAGE | MMU_FTR_NO_SLBIE_B
+#define MMU_FTRS_A2		MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | \
+				MMU_FTR_USE_TLBIVAX_BCAST | \
+				MMU_FTR_LOCK_BCAST_INVAL | \
+				MMU_FTR_USE_TLBRSRV | \
+				MMU_FTR_USE_PAIRED_MAS | \
+				MMU_FTR_TLBIEL | \
+				MMU_FTR_16M_PAGE
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 

arch/powerpc/include/asm/mmu_context.h

@@ -32,6 +32,10 @@ extern void __destroy_context(unsigned long context_id);
 extern void mmu_context_init(void);
 #endif
 
+extern void switch_cop(struct mm_struct *next);
+extern int use_cop(unsigned long acop, struct mm_struct *mm);
+extern void drop_cop(unsigned long acop, struct mm_struct *mm);
+
 /*
  * switch_mm is the entry point called from the architecture independent
  * code in kernel/sched.c
@@ -55,6 +59,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	if (prev == next)
 		return;
 
+#ifdef CONFIG_PPC_ICSWX
+	/* Switch coprocessor context only if prev or next uses a coprocessor */
+	if (prev->context.acop || next->context.acop)
+		switch_cop(next);
+#endif /* CONFIG_PPC_ICSWX */
+
 	/* We must stop all altivec streams before changing the HW
 	 * context
 	 */
@@ -67,7 +77,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 * sub architectures.
 	 */
 #ifdef CONFIG_PPC_STD_MMU_64
-	if (cpu_has_feature(CPU_FTR_SLB))
+	if (mmu_has_feature(MMU_FTR_SLB))
 		switch_slb(tsk, next);
 	else
 		switch_stab(tsk, next);

arch/powerpc/include/asm/mpic.h

@@ -262,6 +262,7 @@ struct mpic
 #ifdef CONFIG_SMP
 	struct irq_chip		hc_ipi;
 #endif
+	struct irq_chip		hc_tm;
 	const char		*name;
 	/* Flags */
 	unsigned int		flags;
@@ -280,7 +281,7 @@ struct mpic
 
 	/* vector numbers used for internal sources (ipi/timers) */
 	unsigned int		ipi_vecs[4];
-	unsigned int		timer_vecs[4];
+	unsigned int		timer_vecs[8];
 
 	/* Spurious vector to program into unused sources */
 	unsigned int		spurious_vec;
@@ -368,6 +369,8 @@ struct mpic
  * NOTE: This flag trumps MPIC_WANTS_RESET.
  */
 #define MPIC_NO_RESET			0x00004000
+/* Freescale MPIC (compatible includes "fsl,mpic") */
+#define MPIC_FSL			0x00008000
 
 /* MPIC HW modification ID */
 #define MPIC_REGSET_MASK		0xf0000000

arch/powerpc/include/asm/pSeries_reconfig.h

@@ -18,13 +18,18 @@
 extern int pSeries_reconfig_notifier_register(struct notifier_block *);
 extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
 extern struct blocking_notifier_head pSeries_reconfig_chain;
+/* Not the best place to put this, will be fixed when we move some
+ * of the rtas suspend-me stuff to pseries */
+extern void pSeries_coalesce_init(void);
 #else /* !CONFIG_PPC_PSERIES */
 static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
 {
 	return 0;
 }
 static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
+static inline void pSeries_coalesce_init(void) { }
 #endif /* CONFIG_PPC_PSERIES */
 
+
 #endif /* __KERNEL__ */
 #endif /* _PPC64_PSERIES_RECONFIG_H */

arch/powerpc/include/asm/paca.h

@@ -92,9 +92,9 @@ struct paca_struct {
 	 * Now, starting in cacheline 2, the exception save areas
 	 */
 	/* used for most interrupts/exceptions */
-	u64 exgen[10] __attribute__((aligned(0x80)));
-	u64 exmc[10];		/* used for machine checks */
-	u64 exslb[10];		/* used for SLB/segment table misses
+	u64 exgen[11] __attribute__((aligned(0x80)));
+	u64 exmc[11];		/* used for machine checks */
+	u64 exslb[11];		/* used for SLB/segment table misses
  				 * on the linear mapping */
 	/* SLB related definitions */
 	u16 vmalloc_sllp;
@@ -106,7 +106,8 @@ struct paca_struct {
 	pgd_t *pgd;			/* Current PGD */
 	pgd_t *kernel_pgd;		/* Kernel PGD */
 	u64 exgen[8] __attribute__((aligned(0x80)));
-	u64 extlb[EX_TLB_SIZE*3] __attribute__((aligned(0x80)));
+	/* We can have up to 3 levels of reentrancy in the TLB miss handler */
+	u64 extlb[3][EX_TLB_SIZE / sizeof(u64)] __attribute__((aligned(0x80)));
 	u64 exmc[8];		/* used for machine checks */
 	u64 excrit[8];		/* used for crit interrupts */
 	u64 exdbg[8];		/* used for debug interrupts */
@@ -125,7 +126,7 @@ struct paca_struct {
 	struct task_struct *__current;	/* Pointer to current */
 	u64 kstack;			/* Saved Kernel stack addr */
 	u64 stab_rr;			/* stab/slb round-robin counter */
-	u64 saved_r1;			/* r1 save for RTAS calls */
+	u64 saved_r1;			/* r1 save for RTAS calls or PM */
 	u64 saved_msr;			/* MSR saved here by enter_rtas */
 	u16 trap_save;			/* Used when bad stack is encountered */
 	u8 soft_enabled;		/* irq soft-enable flag */

arch/powerpc/include/asm/page_64.h

@@ -59,24 +59,7 @@ static __inline__ void clear_page(void *addr)
 	: "ctr", "memory");
 }
 
-extern void copy_4K_page(void *to, void *from);
-
-#ifdef CONFIG_PPC_64K_PAGES
-static inline void copy_page(void *to, void *from)
-{
-	unsigned int i;
-	for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) {
-		copy_4K_page(to, from);
-		to += 4096;
-		from += 4096;
-	}
-}
-#else /* CONFIG_PPC_64K_PAGES */
-static inline void copy_page(void *to, void *from)
-{
-	copy_4K_page(to, from);
-}
-#endif /* CONFIG_PPC_64K_PAGES */
+extern void copy_page(void *to, void *from);
 
 /* Log 2 of page table size */
 extern u64 ppc64_pft_size;
@@ -130,7 +113,7 @@ extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
 extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
 				  unsigned long len, unsigned int psize);
 
-#define slice_mm_new_context(mm)	((mm)->context.id == 0)
+#define slice_mm_new_context(mm)	((mm)->context.id == MMU_NO_CONTEXT)
 
 #endif /* __ASSEMBLY__ */
 #else

arch/powerpc/include/asm/pgtable-ppc64.h

@@ -257,21 +257,20 @@ static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 				      pte_t *ptep)
 {
-	unsigned long old;
 
-       	if ((pte_val(*ptep) & _PAGE_RW) == 0)
-       		return;
-	old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
+	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+		return;
+
+	pte_update(mm, addr, ptep, _PAGE_RW, 0);
 }
 
 static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 					   unsigned long addr, pte_t *ptep)
 {
-	unsigned long old;
-
 	if ((pte_val(*ptep) & _PAGE_RW) == 0)
 		return;
-	old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
+
+	pte_update(mm, addr, ptep, _PAGE_RW, 1);
 }
 
 /*

arch/powerpc/include/asm/ppc-opcode.h

@@ -41,6 +41,10 @@
 #define PPC_INST_RFCI			0x4c000066
 #define PPC_INST_RFDI			0x4c00004e
 #define PPC_INST_RFMCI			0x4c00004c
+#define PPC_INST_MFSPR_DSCR		0x7c1102a6
+#define PPC_INST_MFSPR_DSCR_MASK	0xfc1fffff
+#define PPC_INST_MTSPR_DSCR		0x7c1103a6
+#define PPC_INST_MTSPR_DSCR_MASK	0xfc1fffff
 
 #define PPC_INST_STRING			0x7c00042a
 #define PPC_INST_STRING_MASK		0xfc0007fe
@@ -56,6 +60,17 @@
 #define PPC_INST_TLBSRX_DOT		0x7c0006a5
 #define PPC_INST_XXLOR			0xf0000510
 
+#define PPC_INST_NAP			0x4c000364
+#define PPC_INST_SLEEP			0x4c0003a4
+
+/* A2 specific instructions */
+#define PPC_INST_ERATWE			0x7c0001a6
+#define PPC_INST_ERATRE			0x7c000166
+#define PPC_INST_ERATILX		0x7c000066
+#define PPC_INST_ERATIVAX		0x7c000666
+#define PPC_INST_ERATSX			0x7c000126
+#define PPC_INST_ERATSX_DOT		0x7c000127
+
 /* macros to insert fields into opcodes */
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
 #define __PPC_RB(b)	(((b) & 0x1f) << 11)
@@ -67,6 +82,8 @@
 #define __PPC_XT(s)	__PPC_XS(s)
 #define __PPC_T_TLB(t)	(((t) & 0x3) << 21)
 #define __PPC_WC(w)	(((w) & 0x3) << 21)
+#define __PPC_WS(w)	(((w) & 0x1f) << 11)
+
 /*
  * Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a
  * larx with EH set as an illegal instruction.
@@ -113,6 +130,21 @@
 #define PPC_TLBIVAX(a,b)	stringify_in_c(.long PPC_INST_TLBIVAX | \
 					__PPC_RA(a) | __PPC_RB(b))
 
+#define PPC_ERATWE(s, a, w)	stringify_in_c(.long PPC_INST_ERATWE | \
+					__PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
+#define PPC_ERATRE(s, a, w)	stringify_in_c(.long PPC_INST_ERATRE | \
+					__PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
+#define PPC_ERATILX(t, a, b)	stringify_in_c(.long PPC_INST_ERATILX | \
+					__PPC_T_TLB(t) | __PPC_RA(a) | \
+					__PPC_RB(b))
+#define PPC_ERATIVAX(s, a, b)	stringify_in_c(.long PPC_INST_ERATIVAX | \
+					__PPC_RS(s) | __PPC_RA(a) | __PPC_RB(b))
+#define PPC_ERATSX(t, a, w)	stringify_in_c(.long PPC_INST_ERATSX | \
+					__PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+#define PPC_ERATSX_DOT(t, a, w)	stringify_in_c(.long PPC_INST_ERATSX_DOT | \
+					__PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+
+
 /*
  * Define what the VSX XX1 form instructions will look like, then add
  * the 128 bit load store instructions based on that.
@@ -126,4 +158,7 @@
 #define XXLOR(t, a, b)		stringify_in_c(.long PPC_INST_XXLOR | \
 					       VSX_XX3((t), (a), (b)))
 
+#define PPC_NAP			stringify_in_c(.long PPC_INST_NAP)
+#define PPC_SLEEP		stringify_in_c(.long PPC_INST_SLEEP)
+
 #endif /* _ASM_POWERPC_PPC_OPCODE_H */

arch/powerpc/include/asm/ppc_asm.h

@@ -170,6 +170,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 #define HMT_MEDIUM	or	2,2,2
 #define HMT_MEDIUM_HIGH or	5,5,5		# medium high priority
 #define HMT_HIGH	or	3,3,3
+#define HMT_EXTRA_HIGH	or	7,7,7		# power7 only
 
 #ifdef __KERNEL__
 #ifdef CONFIG_PPC64

arch/powerpc/include/asm/processor.h

@@ -238,6 +238,10 @@ struct thread_struct {
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
 	void*		kvm_shadow_vcpu; /* KVM internal data */
 #endif /* CONFIG_KVM_BOOK3S_32_HANDLER */
+#ifdef CONFIG_PPC64
+	unsigned long	dscr;
+	int		dscr_inherit;
+#endif
 };
 
 #define ARCH_MIN_TASKALIGN 16

arch/powerpc/include/asm/reg.h

@@ -99,17 +99,23 @@
 #define MSR_LE		__MASK(MSR_LE_LG)	/* Little Endian */
 
 #if defined(CONFIG_PPC_BOOK3S_64)
+#define MSR_64BIT	MSR_SF
+
 /* Server variant */
 #define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
-#define MSR_KERNEL      MSR_ | MSR_SF
+#define MSR_KERNEL	MSR_ | MSR_64BIT
 #define MSR_USER32	MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64	MSR_USER32 | MSR_SF
+#define MSR_USER64	MSR_USER32 | MSR_64BIT
 #elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx)
 /* Default MSR for kernel mode. */
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
 #define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
 #endif
 
+#ifndef MSR_64BIT
+#define MSR_64BIT	0
+#endif
+
 /* Floating Point Status and Control Register (FPSCR) Fields */
 #define FPSCR_FX	0x80000000	/* FPU exception summary */
 #define FPSCR_FEX	0x40000000	/* FPU enabled exception summary */
@@ -182,6 +188,8 @@
 
 #define SPRN_CTR	0x009	/* Count Register */
 #define SPRN_DSCR	0x11
+#define SPRN_CFAR	0x1c	/* Come From Address Register */
+#define SPRN_ACOP	0x1F	/* Available Coprocessor Register */
 #define SPRN_CTRLF	0x088
 #define SPRN_CTRLT	0x098
 #define   CTRL_CT	0xc0000000	/* current thread */
@@ -210,8 +218,43 @@
 #define SPRN_TBWL	0x11C	/* Time Base Lower Register (super, R/W) */
 #define SPRN_TBWU	0x11D	/* Time Base Upper Register (super, R/W) */
 #define SPRN_SPURR	0x134	/* Scaled PURR */
+#define SPRN_HSPRG0	0x130	/* Hypervisor Scratch 0 */
+#define SPRN_HSPRG1	0x131	/* Hypervisor Scratch 1 */
+#define SPRN_HDSISR     0x132
+#define SPRN_HDAR       0x133
+#define SPRN_HDEC	0x136	/* Hypervisor Decrementer */
 #define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
+#define SPRN_RMOR	0x138	/* Real mode offset register */
+#define SPRN_HRMOR	0x139	/* Real mode offset register */
+#define SPRN_HSRR0	0x13A	/* Hypervisor Save/Restore 0 */
+#define SPRN_HSRR1	0x13B	/* Hypervisor Save/Restore 1 */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
+#define   LPCR_VPM0	(1ul << (63-0))
+#define   LPCR_VPM1	(1ul << (63-1))
+#define   LPCR_ISL	(1ul << (63-2))
+#define   LPCR_DPFD_SH	(63-11)
+#define   LPCR_VRMA_L	(1ul << (63-12))
+#define   LPCR_VRMA_LP0	(1ul << (63-15))
+#define   LPCR_VRMA_LP1	(1ul << (63-16))
+#define   LPCR_RMLS    0x1C000000      /* impl dependent rmo limit sel */
+#define   LPCR_ILE     0x02000000      /* !HV irqs set MSR:LE */
+#define   LPCR_PECE	0x00007000	/* powersave exit cause enable */
+#define     LPCR_PECE0	0x00004000	/* ext. exceptions can cause exit */
+#define     LPCR_PECE1	0x00002000	/* decrementer can cause exit */
+#define     LPCR_PECE2	0x00001000	/* machine check etc can cause exit */
+#define   LPCR_MER	0x00000800	/* Mediated External Exception */
+#define   LPCR_LPES0   0x00000008      /* LPAR Env selector 0 */
+#define   LPCR_LPES1   0x00000004      /* LPAR Env selector 1 */
+#define   LPCR_RMI     0x00000002      /* real mode is cache inhibit */
+#define   LPCR_HDICE   0x00000001      /* Hyp Decr enable (HV,PR,EE) */
+#define SPRN_LPID	0x13F	/* Logical Partition Identifier */
+#define	SPRN_HMER	0x150	/* Hardware m? error recovery */
+#define	SPRN_HMEER	0x151	/* Hardware m? enable error recovery */
+#define	SPRN_HEIR	0x153	/* Hypervisor Emulated Instruction Register */
+#define SPRN_TLBINDEXR	0x154	/* P7 TLB control register */
+#define SPRN_TLBVPNR	0x155	/* P7 TLB control register */
+#define SPRN_TLBRPNR	0x156	/* P7 TLB control register */
+#define SPRN_TLBLPIDR	0x157	/* P7 TLB control register */
 #define SPRN_DBAT0L	0x219	/* Data BAT 0 Lower Register */
 #define SPRN_DBAT0U	0x218	/* Data BAT 0 Upper Register */
 #define SPRN_DBAT1L	0x21B	/* Data BAT 1 Lower Register */
@@ -434,16 +477,23 @@
 #define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
 #define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
 #define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
-#define   SRR1_WAKERESET	0x00380000 /* System reset */
 #define   SRR1_WAKESYSERR	0x00300000 /* System error */
 #define   SRR1_WAKEEE		0x00200000 /* External interrupt */
 #define   SRR1_WAKEMT		0x00280000 /* mtctrl */
+#define	  SRR1_WAKEHMI		0x00280000 /* Hypervisor maintenance */
 #define   SRR1_WAKEDEC		0x00180000 /* Decrementer interrupt */
 #define   SRR1_WAKETHERM	0x00100000 /* Thermal management interrupt */
+#define	  SRR1_WAKERESET	0x00100000 /* System reset */
+#define	  SRR1_WAKESTATE	0x00030000 /* Powersave exit mask [46:47] */
+#define	  SRR1_WS_DEEPEST	0x00030000 /* Some resources not maintained,
+					  * may not be recoverable */
+#define	  SRR1_WS_DEEPER	0x00020000 /* Some resources not maintained */
+#define	  SRR1_WS_DEEP		0x00010000 /* All resources maintained */
 #define   SRR1_PROGFPE		0x00100000 /* Floating Point Enabled */
 #define   SRR1_PROGPRIV		0x00040000 /* Privileged instruction */
 #define   SRR1_PROGTRAP		0x00020000 /* Trap */
 #define   SRR1_PROGADDR		0x00010000 /* SRR0 contains subsequent addr */
+
 #define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
 #define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
 
@@ -673,12 +723,15 @@
  * SPRG usage:
  *
  * All 64-bit:
- *	- SPRG1 stores PACA pointer
+ *	- SPRG1 stores PACA pointer except 64-bit server in
+ *        HV mode in which case it is HSPRG0
  *
  * 64-bit server:
  *	- SPRG0 unused (reserved for HV on Power4)
  *	- SPRG2 scratch for exception vectors
  *	- SPRG3 unused (user visible)
+ *      - HSPRG0 stores PACA in HV mode
+ *      - HSPRG1 scratch for "HV" exceptions
  *
  * 64-bit embedded
  *	- SPRG0 generic exception scratch
@@ -741,6 +794,41 @@
 
 #ifdef CONFIG_PPC_BOOK3S_64
 #define SPRN_SPRG_SCRATCH0	SPRN_SPRG2
+#define SPRN_SPRG_HPACA		SPRN_HSPRG0
+#define SPRN_SPRG_HSCRATCH0	SPRN_HSPRG1
+
+#define GET_PACA(rX)					\
+	BEGIN_FTR_SECTION_NESTED(66);			\
+	mfspr	rX,SPRN_SPRG_PACA;			\
+	FTR_SECTION_ELSE_NESTED(66);			\
+	mfspr	rX,SPRN_SPRG_HPACA;			\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#define SET_PACA(rX)					\
+	BEGIN_FTR_SECTION_NESTED(66);			\
+	mtspr	SPRN_SPRG_PACA,rX;			\
+	FTR_SECTION_ELSE_NESTED(66);			\
+	mtspr	SPRN_SPRG_HPACA,rX;			\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#define GET_SCRATCH0(rX)				\
+	BEGIN_FTR_SECTION_NESTED(66);			\
+	mfspr	rX,SPRN_SPRG_SCRATCH0;			\
+	FTR_SECTION_ELSE_NESTED(66);			\
+	mfspr	rX,SPRN_SPRG_HSCRATCH0;			\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#define SET_SCRATCH0(rX)				\
+	BEGIN_FTR_SECTION_NESTED(66);			\
+	mtspr	SPRN_SPRG_SCRATCH0,rX;			\
+	FTR_SECTION_ELSE_NESTED(66);			\
+	mtspr	SPRN_SPRG_HSCRATCH0,rX;			\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#else /* CONFIG_PPC_BOOK3S_64 */
+#define GET_SCRATCH0(rX)	mfspr	rX,SPRN_SPRG_SCRATCH0
+#define SET_SCRATCH0(rX)	mtspr	SPRN_SPRG_SCRATCH0,rX
+
 #endif
 
 #ifdef CONFIG_PPC_BOOK3E_64
@@ -750,6 +838,10 @@
 #define SPRN_SPRG_TLB_EXFRAME	SPRN_SPRG2
 #define SPRN_SPRG_TLB_SCRATCH	SPRN_SPRG6
 #define SPRN_SPRG_GEN_SCRATCH	SPRN_SPRG0
+
+#define SET_PACA(rX)	mtspr	SPRN_SPRG_PACA,rX
+#define GET_PACA(rX)	mfspr	rX,SPRN_SPRG_PACA
+
 #endif
 
 #ifdef CONFIG_PPC_BOOK3S_32
@@ -800,6 +892,8 @@
 #define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
 #endif
 
+
+
 /*
  * An mtfsf instruction with the L bit set. On CPUs that support this a
  * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
@@ -894,6 +988,8 @@
 #define PV_POWER5p	0x003B
 #define PV_POWER7	0x003F
 #define PV_970FX	0x003C
+#define PV_POWER6	0x003E
+#define PV_POWER7	0x003F
 #define PV_630		0x0040
 #define PV_630p	0x0041
 #define PV_970MP	0x0044

arch/powerpc/include/asm/reg_a2.h

@@ -0,0 +1,165 @@
+/*
+ *  Register definitions specific to the A2 core
+ *
+ *  Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_REG_A2_H__
+#define __ASM_POWERPC_REG_A2_H__
+
+#define SPRN_TENSR	0x1b5
+#define SPRN_TENS	0x1b6	/* Thread ENable Set */
+#define SPRN_TENC	0x1b7	/* Thread ENable Clear */
+
+#define SPRN_A2_CCR0	0x3f0	/* Core Configuration Register 0 */
+#define SPRN_A2_CCR1	0x3f1	/* Core Configuration Register 1 */
+#define SPRN_A2_CCR2	0x3f2	/* Core Configuration Register 2 */
+#define SPRN_MMUCR0	0x3fc	/* MMU Control Register 0 */
+#define SPRN_MMUCR1	0x3fd	/* MMU Control Register 1 */
+#define SPRN_MMUCR2	0x3fe	/* MMU Control Register 2 */
+#define SPRN_MMUCR3	0x3ff	/* MMU Control Register 3 */
+
+#define SPRN_IAR	0x372
+
+#define SPRN_IUCR0	0x3f3
+#define IUCR0_ICBI_ACK	0x1000
+
+#define SPRN_XUCR0	0x3f6	/* Execution Unit Config Register 0 */
+
+#define A2_IERAT_SIZE	16
+#define A2_DERAT_SIZE	32
+
+/* A2 MMUCR0 bits */
+#define MMUCR0_ECL	0x80000000	/* Extended Class for TLB fills */
+#define MMUCR0_TID_NZ	0x40000000	/* TID is non-zero */
+#define MMUCR0_TS	0x10000000	/* Translation space for TLB fills */
+#define MMUCR0_TGS	0x20000000	/* Guest space for TLB fills */
+#define MMUCR0_TLBSEL	0x0c000000	/* TLB or ERAT target for TLB fills */
+#define MMUCR0_TLBSEL_U	0x00000000	/*  TLBSEL = UTLB */
+#define MMUCR0_TLBSEL_I	0x08000000	/*  TLBSEL = I-ERAT */
+#define MMUCR0_TLBSEL_D	0x0c000000	/*  TLBSEL = D-ERAT */
+#define MMUCR0_LOCKSRSH	0x02000000	/* Use TLB lock on tlbsx. */
+#define MMUCR0_TID_MASK	0x000000ff	/* TID field */
+
+/* A2 MMUCR1 bits */
+#define MMUCR1_IRRE		0x80000000	/* I-ERAT round robin enable */
+#define MMUCR1_DRRE		0x40000000	/* D-ERAT round robin enable */
+#define MMUCR1_REE		0x20000000	/* Reference Exception Enable*/
+#define MMUCR1_CEE		0x10000000	/* Change exception enable */
+#define MMUCR1_CSINV_ALL	0x00000000	/* Inval ERAT on all CS evts */
+#define MMUCR1_CSINV_NISYNC	0x04000000	/* Inval ERAT on all ex isync*/
+#define MMUCR1_CSINV_NEVER	0x0c000000	/* Don't inval ERAT on CS */
+#define MMUCR1_ICTID		0x00080000	/* IERAT class field as TID */
+#define MMUCR1_ITTID		0x00040000	/* IERAT thdid field as TID */
+#define MMUCR1_DCTID		0x00020000	/* DERAT class field as TID */
+#define MMUCR1_DTTID		0x00010000	/* DERAT thdid field as TID */
+#define MMUCR1_DCCD		0x00008000	/* DERAT class ignore */
+#define MMUCR1_TLBWE_BINV	0x00004000	/* back invalidate on tlbwe */
+
+/* A2 MMUCR2 bits */
+#define MMUCR2_PSSEL_SHIFT	4
+
+/* A2 MMUCR3 bits */
+#define MMUCR3_THID		0x0000000f	/* Thread ID */
+
+/* *** ERAT TLB bits definitions */
+#define TLB0_EPN_MASK		ASM_CONST(0xfffffffffffff000)
+#define TLB0_CLASS_MASK		ASM_CONST(0x0000000000000c00)
+#define TLB0_CLASS_00		ASM_CONST(0x0000000000000000)
+#define TLB0_CLASS_01		ASM_CONST(0x0000000000000400)
+#define TLB0_CLASS_10		ASM_CONST(0x0000000000000800)
+#define TLB0_CLASS_11		ASM_CONST(0x0000000000000c00)
+#define TLB0_V			ASM_CONST(0x0000000000000200)
+#define TLB0_X			ASM_CONST(0x0000000000000100)
+#define TLB0_SIZE_MASK		ASM_CONST(0x00000000000000f0)
+#define TLB0_SIZE_4K		ASM_CONST(0x0000000000000010)
+#define TLB0_SIZE_64K		ASM_CONST(0x0000000000000030)
+#define TLB0_SIZE_1M		ASM_CONST(0x0000000000000050)
+#define TLB0_SIZE_16M		ASM_CONST(0x0000000000000070)
+#define TLB0_SIZE_1G		ASM_CONST(0x00000000000000a0)
+#define TLB0_THDID_MASK		ASM_CONST(0x000000000000000f)
+#define TLB0_THDID_0		ASM_CONST(0x0000000000000001)
+#define TLB0_THDID_1		ASM_CONST(0x0000000000000002)
+#define TLB0_THDID_2		ASM_CONST(0x0000000000000004)
+#define TLB0_THDID_3		ASM_CONST(0x0000000000000008)
+#define TLB0_THDID_ALL		ASM_CONST(0x000000000000000f)
+
+#define TLB1_RESVATTR		ASM_CONST(0x00f0000000000000)
+#define TLB1_U0			ASM_CONST(0x0008000000000000)
+#define TLB1_U1			ASM_CONST(0x0004000000000000)
+#define TLB1_U2			ASM_CONST(0x0002000000000000)
+#define TLB1_U3			ASM_CONST(0x0001000000000000)
+#define TLB1_R			ASM_CONST(0x0000800000000000)
+#define TLB1_C			ASM_CONST(0x0000400000000000)
+#define TLB1_RPN_MASK		ASM_CONST(0x000003fffffff000)
+#define TLB1_W			ASM_CONST(0x0000000000000800)
+#define TLB1_I			ASM_CONST(0x0000000000000400)
+#define TLB1_M			ASM_CONST(0x0000000000000200)
+#define TLB1_G			ASM_CONST(0x0000000000000100)
+#define TLB1_E			ASM_CONST(0x0000000000000080)
+#define TLB1_VF			ASM_CONST(0x0000000000000040)
+#define TLB1_UX			ASM_CONST(0x0000000000000020)
+#define TLB1_SX			ASM_CONST(0x0000000000000010)
+#define TLB1_UW			ASM_CONST(0x0000000000000008)
+#define TLB1_SW			ASM_CONST(0x0000000000000004)
+#define TLB1_UR			ASM_CONST(0x0000000000000002)
+#define TLB1_SR			ASM_CONST(0x0000000000000001)
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
+#define WSP_UART_PHYS	0xffc000c000
+/* This needs to be careful chosen to hit a !0 congruence class
+ * in the TLB since we bolt it in way 3, which is already occupied
+ * by our linear mapping primary bolted entry in CC 0.
+ */
+#define WSP_UART_VIRT	0xf000000000001000
+#endif
+
+/* A2 erativax attributes definitions */
+#define ERATIVAX_RS_IS_ALL		0x000
+#define ERATIVAX_RS_IS_TID		0x040
+#define ERATIVAX_RS_IS_CLASS		0x080
+#define ERATIVAX_RS_IS_FULLMATCH	0x0c0
+#define ERATIVAX_CLASS_00		0x000
+#define ERATIVAX_CLASS_01		0x010
+#define ERATIVAX_CLASS_10		0x020
+#define ERATIVAX_CLASS_11		0x030
+#define ERATIVAX_PSIZE_4K		(TLB_PSIZE_4K >> 1)
+#define ERATIVAX_PSIZE_64K		(TLB_PSIZE_64K >> 1)
+#define ERATIVAX_PSIZE_1M		(TLB_PSIZE_1M >> 1)
+#define ERATIVAX_PSIZE_16M		(TLB_PSIZE_16M >> 1)
+#define ERATIVAX_PSIZE_1G		(TLB_PSIZE_1G >> 1)
+
+/* A2 eratilx attributes definitions */
+#define ERATILX_T_ALL			0
+#define ERATILX_T_TID			1
+#define ERATILX_T_TGS			2
+#define ERATILX_T_FULLMATCH		3
+#define ERATILX_T_CLASS0		4
+#define ERATILX_T_CLASS1		5
+#define ERATILX_T_CLASS2		6
+#define ERATILX_T_CLASS3		7
+
+/* XUCR0 bits */
+#define XUCR0_TRACE_UM_T0		0x40000000	/* Thread 0 */
+#define XUCR0_TRACE_UM_T1		0x20000000	/* Thread 1 */
+#define XUCR0_TRACE_UM_T2		0x10000000	/* Thread 2 */
+#define XUCR0_TRACE_UM_T3		0x08000000	/* Thread 3 */
+
+/* A2 CCR0 register */
+#define A2_CCR0_PME_DISABLED		0x00000000
+#define A2_CCR0_PME_SLEEP		0x40000000
+#define A2_CCR0_PME_RVW			0x80000000
+#define A2_CCR0_PME_DISABLED2		0xc0000000
+
+/* A2 CCR2 register */
+#define A2_CCR2_ERAT_ONLY_MODE		0x00000001
+#define A2_CCR2_ENABLE_ICSWX		0x00000002
+#define A2_CCR2_ENABLE_PC		0x20000000
+#define A2_CCR2_ENABLE_TRACE		0x40000000
+
+#endif /* __ASM_POWERPC_REG_A2_H__ */

arch/powerpc/include/asm/reg_booke.h

@@ -27,10 +27,12 @@
 #define MSR_CM		(1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */
 
 #if defined(CONFIG_PPC_BOOK3E_64)
+#define MSR_64BIT	MSR_CM
+
 #define MSR_		MSR_ME | MSR_CE
-#define MSR_KERNEL      MSR_ | MSR_CM
+#define MSR_KERNEL	MSR_ | MSR_64BIT
 #define MSR_USER32	MSR_ | MSR_PR | MSR_EE | MSR_DE
-#define MSR_USER64	MSR_USER32 | MSR_CM | MSR_DE
+#define MSR_USER64	MSR_USER32 | MSR_64BIT
 #elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
 #define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
@@ -81,6 +83,10 @@
 #define SPRN_IVOR13	0x19D	/* Interrupt Vector Offset Register 13 */
 #define SPRN_IVOR14	0x19E	/* Interrupt Vector Offset Register 14 */
 #define SPRN_IVOR15	0x19F	/* Interrupt Vector Offset Register 15 */
+#define SPRN_IVOR38	0x1B0	/* Interrupt Vector Offset Register 38 */
+#define SPRN_IVOR39	0x1B1	/* Interrupt Vector Offset Register 39 */
+#define SPRN_IVOR40	0x1B2	/* Interrupt Vector Offset Register 40 */
+#define SPRN_IVOR41	0x1B3	/* Interrupt Vector Offset Register 41 */
 #define SPRN_SPEFSCR	0x200	/* SPE & Embedded FP Status & Control */
 #define SPRN_BBEAR	0x201	/* Branch Buffer Entry Address Register */
 #define SPRN_BBTAR	0x202	/* Branch Buffer Target Address Register */

arch/powerpc/include/asm/rtas.h

@@ -158,7 +158,50 @@ struct rtas_error_log {
 	unsigned long target:4;			/* Target of failed operation */
 	unsigned long type:8;			/* General event or error*/
 	unsigned long extended_log_length:32;	/* length in bytes */
-	unsigned char buffer[1];
+	unsigned char buffer[1];		/* Start of extended log */
+						/* Variable length.      */
+};
+
+#define RTAS_V6EXT_LOG_FORMAT_EVENT_LOG	14
+
+#define RTAS_V6EXT_COMPANY_ID_IBM	(('I' << 24) | ('B' << 16) | ('M' << 8))
+
+/* RTAS general extended event log, Version 6. The extended log starts
+ * from "buffer" field of struct rtas_error_log defined above.
+ */
+struct rtas_ext_event_log_v6 {
+	/* Byte 0 */
+	uint32_t log_valid:1;		/* 1:Log valid */
+	uint32_t unrecoverable_error:1;	/* 1:Unrecoverable error */
+	uint32_t recoverable_error:1;	/* 1:recoverable (correctable	*/
+					/*   or successfully retried)	*/
+	uint32_t degraded_operation:1;	/* 1:Unrecoverable err, bypassed*/
+					/*   - degraded operation (e.g.	*/
+					/*   CPU or mem taken off-line)	*/
+	uint32_t predictive_error:1;
+	uint32_t new_log:1;		/* 1:"New" log (Always 1 for	*/
+					/*   data returned from RTAS	*/
+	uint32_t big_endian:1;		/* 1: Big endian */
+	uint32_t :1;			/* reserved */
+	/* Byte 1 */
+	uint32_t :8;			/* reserved */
+	/* Byte 2 */
+	uint32_t powerpc_format:1;	/* Set to 1 (indicating log is	*/
+					/* in PowerPC format		*/
+	uint32_t :3;			/* reserved */
+	uint32_t log_format:4;		/* Log format indicator. Define	*/
+					/* format used for byte 12-2047	*/
+	/* Byte 3 */
+	uint32_t :8;			/* reserved */
+	/* Byte 4-11 */
+	uint8_t reserved[8];		/* reserved */
+	/* Byte 12-15 */
+	uint32_t company_id;		/* Company ID of the company	*/
+					/* that defines the format for	*/
+					/* the vendor specific log type	*/
+	/* Byte 16-end of log */
+	uint8_t vendor_log[1];		/* Start of vendor specific log	*/
+					/* Variable length.		*/
 };
 
 /*

arch/powerpc/include/asm/scom.h

@@ -0,0 +1,156 @@
+/*
+ * Copyright 2010 Benjamin Herrenschmidt, IBM Corp
+ *                <benh@kernel.crashing.org>
+ *     and        David Gibson, IBM Corporation.
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_SCOM_H
+#define _ASM_POWERPC_SCOM_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_SCOM
+
+/*
+ * The SCOM bus is a sideband bus used for accessing various internal
+ * registers of the processor or the chipset. The implementation details
+ * differ between processors and platforms, and the access method as
+ * well.
+ *
+ * This API allows to "map" ranges of SCOM register numbers associated
+ * with a given SCOM controller. The later must be represented by a
+ * device node, though some implementations might support NULL if there
+ * is no possible ambiguity
+ *
+ * Then, scom_read/scom_write can be used to accesses registers inside
+ * that range. The argument passed is a register number relative to
+ * the beginning of the range mapped.
+ */
+
+typedef void *scom_map_t;
+
+/* Value for an invalid SCOM map */
+#define SCOM_MAP_INVALID	(NULL)
+
+/* The scom_controller data structure is what the platform passes
+ * to the core code in scom_init, it provides the actual implementation
+ * of all the SCOM functions
+ */
+struct scom_controller {
+	scom_map_t (*map)(struct device_node *ctrl_dev, u64 reg, u64 count);
+	void (*unmap)(scom_map_t map);
+
+	u64 (*read)(scom_map_t map, u32 reg);
+	void (*write)(scom_map_t map, u32 reg, u64 value);
+};
+
+extern const struct scom_controller *scom_controller;
+
+/**
+ * scom_init - Initialize the SCOM backend, called by the platform
+ * @controller: The platform SCOM controller
+ */
+static inline void scom_init(const struct scom_controller *controller)
+{
+	scom_controller = controller;
+}
+
+/**
+ * scom_map_ok - Test is a SCOM mapping is successful
+ * @map: The result of scom_map to test
+ */
+static inline int scom_map_ok(scom_map_t map)
+{
+	return map != SCOM_MAP_INVALID;
+}
+
+/**
+ * scom_map - Map a block of SCOM registers
+ * @ctrl_dev: Device node of the SCOM controller
+ *            some implementations allow NULL here
+ * @reg: first SCOM register to map
+ * @count: Number of SCOM registers to map
+ */
+
+static inline scom_map_t scom_map(struct device_node *ctrl_dev,
+				  u64 reg, u64 count)
+{
+	return scom_controller->map(ctrl_dev, reg, count);
+}
+
+/**
+ * scom_find_parent - Find the SCOM controller for a device
+ * @dev: OF node of the device
+ *
+ * This is not meant for general usage, but in combination with
+ * scom_map() allows to map registers not represented by the
+ * device own scom-reg property. Useful for applying HW workarounds
+ * on things not properly represented in the device-tree for example.
+ */
+struct device_node *scom_find_parent(struct device_node *dev);
+
+
+/**
+ * scom_map_device - Map a device's block of SCOM registers
+ * @dev: OF node of the device
+ * @index: Register bank index (index in "scom-reg" property)
+ *
+ * This function will use the device-tree binding for SCOM which
+ * is to follow "scom-parent" properties until it finds a node with
+ * a "scom-controller" property to find the controller. It will then
+ * use the "scom-reg" property which is made of reg/count pairs,
+ * each of them having a size defined by the controller's #scom-cells
+ * property
+ */
+extern scom_map_t scom_map_device(struct device_node *dev, int index);
+
+
+/**
+ * scom_unmap - Unmap a block of SCOM registers
+ * @map: Result of scom_map is to be unmapped
+ */
+static inline void scom_unmap(scom_map_t map)
+{
+	if (scom_map_ok(map))
+		scom_controller->unmap(map);
+}
+
+/**
+ * scom_read - Read a SCOM register
+ * @map: Result of scom_map
+ * @reg: Register index within that map
+ */
+static inline u64 scom_read(scom_map_t map, u32 reg)
+{
+	return scom_controller->read(map, reg);
+}
+
+/**
+ * scom_write - Write to a SCOM register
+ * @map: Result of scom_map
+ * @reg: Register index within that map
+ * @value: Value to write
+ */
+static inline void scom_write(scom_map_t map, u32 reg, u64 value)
+{
+	scom_controller->write(map, reg, value);
+}
+
+#endif /* CONFIG_PPC_SCOM */
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SCOM_H */

arch/powerpc/include/asm/smp.h

@@ -20,6 +20,7 @@
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/kernel.h>
+#include <linux/irqreturn.h>
 
 #ifndef __ASSEMBLY__
 
@@ -29,14 +30,32 @@
 #include <asm/percpu.h>
 
 extern int boot_cpuid;
+extern int boot_cpu_count;
 
 extern void cpu_die(void);
 
 #ifdef CONFIG_SMP
 
-extern void smp_send_debugger_break(int cpu);
-extern void smp_message_recv(int);
+struct smp_ops_t {
+	void  (*message_pass)(int cpu, int msg);
+#ifdef CONFIG_PPC_SMP_MUXED_IPI
+	void  (*cause_ipi)(int cpu, unsigned long data);
+#endif
+	int   (*probe)(void);
+	int   (*kick_cpu)(int nr);
+	void  (*setup_cpu)(int nr);
+	void  (*bringup_done)(void);
+	void  (*take_timebase)(void);
+	void  (*give_timebase)(void);
+	int   (*cpu_disable)(void);
+	void  (*cpu_die)(unsigned int nr);
+	int   (*cpu_bootable)(unsigned int nr);
+};
+
+extern void smp_send_debugger_break(void);
 extern void start_secondary_resume(void);
+extern void __devinit smp_generic_give_timebase(void);
+extern void __devinit smp_generic_take_timebase(void);
 
 DECLARE_PER_CPU(unsigned int, cpu_pvr);
 
@@ -93,13 +112,16 @@ extern int cpu_to_core_id(int cpu);
 #define PPC_MSG_CALL_FUNC_SINGLE	2
 #define PPC_MSG_DEBUGGER_BREAK  3
 
-/*
- * irq controllers that have dedicated ipis per message and don't
- * need additional code in the action handler may use this
- */
+/* for irq controllers that have dedicated ipis per message (4) */
 extern int smp_request_message_ipi(int virq, int message);
 extern const char *smp_ipi_name[];
 
+/* for irq controllers with only a single ipi */
+extern void smp_muxed_ipi_set_data(int cpu, unsigned long data);
+extern void smp_muxed_ipi_message_pass(int cpu, int msg);
+extern void smp_muxed_ipi_resend(void);
+extern irqreturn_t smp_ipi_demux(void);
+
 void smp_init_iSeries(void);
 void smp_init_pSeries(void);
 void smp_init_cell(void);
@@ -149,7 +171,7 @@ extern int smt_enabled_at_boot;
 
 extern int smp_mpic_probe(void);
 extern void smp_mpic_setup_cpu(int cpu);
-extern void smp_generic_kick_cpu(int nr);
+extern int smp_generic_kick_cpu(int nr);
 
 extern void smp_generic_give_timebase(void);
 extern void smp_generic_take_timebase(void);
@@ -169,6 +191,8 @@ extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;
 
+extern irqreturn_t debug_ipi_action(int irq, void *data);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */

arch/powerpc/include/asm/system.h

@@ -219,8 +219,6 @@ extern int mem_init_done;	/* set on boot once kmalloc can be called */
 extern int init_bootmem_done;	/* set once bootmem is available */
 extern phys_addr_t memory_limit;
 extern unsigned long klimit;
-
-extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
 extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
 
 extern int powersave_nap;	/* set if nap mode can be used in idle loop */

arch/powerpc/include/asm/tlbflush.h

@@ -79,6 +79,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 
 #elif defined(CONFIG_PPC_STD_MMU_64)
 
+#define MMU_NO_CONTEXT		0
+
 /*
  * TLB flushing for 64-bit hash-MMU CPUs
  */

arch/powerpc/include/asm/udbg.h

@@ -52,6 +52,7 @@ extern void __init udbg_init_44x_as1(void);
 extern void __init udbg_init_40x_realmode(void);
 extern void __init udbg_init_cpm(void);
 extern void __init udbg_init_usbgecko(void);
+extern void __init udbg_init_wsp(void);
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_UDBG_H */

arch/powerpc/include/asm/wsp.h

@@ -0,0 +1,14 @@
+/*
+ *  Copyright 2011 Michael Ellerman, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_POWERPC_WSP_H
+#define __ASM_POWERPC_WSP_H
+
+extern int wsp_get_chip_id(struct device_node *dn);
+
+#endif /* __ASM_POWERPC_WSP_H */

arch/powerpc/include/asm/xics.h

@@ -0,0 +1,142 @@
+/*
+ * Common definitions accross all variants of ICP and ICS interrupt
+ * controllers.
+ */
+
+#ifndef _XICS_H
+#define _XICS_H
+
+#include <linux/interrupt.h>
+
+#define XICS_IPI		2
+#define XICS_IRQ_SPURIOUS	0
+
+/* Want a priority other than 0.  Various HW issues require this. */
+#define	DEFAULT_PRIORITY	5
+
+/*
+ * Mark IPIs as higher priority so we can take them inside interrupts that
+ * arent marked IRQF_DISABLED
+ */
+#define IPI_PRIORITY		4
+
+/* The least favored priority */
+#define LOWEST_PRIORITY		0xFF
+
+/* The number of priorities defined above */
+#define MAX_NUM_PRIORITIES	3
+
+/* Native ICP */
+extern int icp_native_init(void);
+
+/* PAPR ICP */
+extern int icp_hv_init(void);
+
+/* ICP ops */
+struct icp_ops {
+	unsigned int (*get_irq)(void);
+	void (*eoi)(struct irq_data *d);
+	void (*set_priority)(unsigned char prio);
+	void (*teardown_cpu)(void);
+	void (*flush_ipi)(void);
+#ifdef CONFIG_SMP
+	void (*cause_ipi)(int cpu, unsigned long data);
+	irq_handler_t ipi_action;
+#endif
+};
+
+extern const struct icp_ops *icp_ops;
+
+/* Native ICS */
+extern int ics_native_init(void);
+
+/* RTAS ICS */
+extern int ics_rtas_init(void);
+
+/* ICS instance, hooked up to chip_data of an irq */
+struct ics {
+	struct list_head link;
+	int (*map)(struct ics *ics, unsigned int virq);
+	void (*mask_unknown)(struct ics *ics, unsigned long vec);
+	long (*get_server)(struct ics *ics, unsigned long vec);
+	int (*host_match)(struct ics *ics, struct device_node *node);
+	char data[];
+};
+
+/* Commons */
+extern unsigned int xics_default_server;
+extern unsigned int xics_default_distrib_server;
+extern unsigned int xics_interrupt_server_size;
+extern struct irq_host *xics_host;
+
+struct xics_cppr {
+	unsigned char stack[MAX_NUM_PRIORITIES];
+	int index;
+};
+
+DECLARE_PER_CPU(struct xics_cppr, xics_cppr);
+
+static inline void xics_push_cppr(unsigned int vec)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	if (WARN_ON(os_cppr->index >= MAX_NUM_PRIORITIES - 1))
+		return;
+
+	if (vec == XICS_IPI)
+		os_cppr->stack[++os_cppr->index] = IPI_PRIORITY;
+	else
+		os_cppr->stack[++os_cppr->index] = DEFAULT_PRIORITY;
+}
+
+static inline unsigned char xics_pop_cppr(void)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	if (WARN_ON(os_cppr->index < 1))
+		return LOWEST_PRIORITY;
+
+	return os_cppr->stack[--os_cppr->index];
+}
+
+static inline void xics_set_base_cppr(unsigned char cppr)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	/* we only really want to set the priority when there's
+	 * just one cppr value on the stack
+	 */
+	WARN_ON(os_cppr->index != 0);
+
+	os_cppr->stack[0] = cppr;
+}
+
+static inline unsigned char xics_cppr_top(void)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+	
+	return os_cppr->stack[os_cppr->index];
+}
+
+DECLARE_PER_CPU_SHARED_ALIGNED(unsigned long, xics_ipi_message);
+
+extern void xics_init(void);
+extern void xics_setup_cpu(void);
+extern void xics_update_irq_servers(void);
+extern void xics_set_cpu_giq(unsigned int gserver, unsigned int join);
+extern void xics_mask_unknown_vec(unsigned int vec);
+extern irqreturn_t xics_ipi_dispatch(int cpu);
+extern int xics_smp_probe(void);
+extern void xics_register_ics(struct ics *ics);
+extern void xics_teardown_cpu(void);
+extern void xics_kexec_teardown_cpu(int secondary);
+extern void xics_migrate_irqs_away(void);
+#ifdef CONFIG_SMP
+extern int xics_get_irq_server(unsigned int virq, const struct cpumask *cpumask,
+			       unsigned int strict_check);
+#else
+#define xics_get_irq_server(virq, cpumask, strict_check) (xics_default_server)
+#endif
+
+
+#endif /* _XICS_H */

arch/powerpc/kernel/Makefile

@@ -38,11 +38,14 @@ obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   paca.o nvram_64.o firmware.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
+obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_power7.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
 obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o idle_book3e.o
+obj-$(CONFIG_PPC_A2)		+= cpu_setup_a2.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
+obj-$(CONFIG_PPC_P7_NAP)	+= idle_power7.o
 obj-$(CONFIG_PPC_OF)		+= of_platform.o prom_parse.o
 obj-$(CONFIG_PPC_CLOCK)		+= clock.o
 procfs-y			:= proc_powerpc.o
@@ -75,7 +78,6 @@ obj-$(CONFIG_PPC_FSL_BOOK3E)	+= cpu_setup_fsl_booke.o dbell.o
 obj-$(CONFIG_PPC_BOOK3E_64)	+= dbell.o
 
 extra-y				:= head_$(CONFIG_WORD_SIZE).o
-extra-$(CONFIG_PPC_BOOK3E_32)	:= head_new_booke.o
 extra-$(CONFIG_40x)		:= head_40x.o
 extra-$(CONFIG_44x)		:= head_44x.o
 extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
@@ -103,6 +105,8 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o \
 obj-$(CONFIG_AUDIT)		+= audit.o
 obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
+obj-$(CONFIG_PPC_IO_WORKAROUNDS)	+= io-workarounds.o
+
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o

arch/powerpc/kernel/asm-offsets.c

@@ -74,6 +74,7 @@ int main(void)
 	DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
+	DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */

arch/powerpc/kernel/cpu_setup_a2.S

@@ -0,0 +1,114 @@
+/*
+ *  A2 specific assembly support code
+ *
+ *  Copyright 2009 Ben Herrenschmidt, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/ppc_asm.h>
+#include <asm/ppc-opcode.h>
+#include <asm/processor.h>
+#include <asm/reg_a2.h>
+#include <asm/reg.h>
+#include <asm/thread_info.h>
+
+/*
+ * Disable thdid and class fields in ERATs to bump PID to full 14 bits capacity.
+ * This also prevents external LPID accesses but that isn't a problem when not a
+ * guest. Under PV, this setting will be ignored and MMUCR will return the right
+ * number of PID bits we can use.
+ */
+#define MMUCR1_EXTEND_PID \
+	(MMUCR1_ICTID | MMUCR1_ITTID | MMUCR1_DCTID | \
+	 MMUCR1_DTTID | MMUCR1_DCCD)
+
+/*
+ * Use extended PIDs if enabled.
+ * Don't clear the ERATs on context sync events and enable I & D LRU.
+ * Enable ERAT back invalidate when tlbwe overwrites an entry.
+ */
+#define INITIAL_MMUCR1 \
+	(MMUCR1_EXTEND_PID | MMUCR1_CSINV_NEVER | MMUCR1_IRRE | \
+	 MMUCR1_DRRE | MMUCR1_TLBWE_BINV)
+
+_GLOBAL(__setup_cpu_a2)
+	/* Some of these are actually thread local and some are
+	 * core local but doing it always won't hurt
+	 */
+
+#ifdef CONFIG_PPC_WSP_COPRO
+	/* Make sure ACOP starts out as zero */
+	li	r3,0
+	mtspr   SPRN_ACOP,r3
+
+	/* Enable icswx instruction */
+	mfspr   r3,SPRN_A2_CCR2
+	ori     r3,r3,A2_CCR2_ENABLE_ICSWX
+	mtspr   SPRN_A2_CCR2,r3
+
+	/* Unmask all CTs in HACOP */
+	li      r3,-1
+	mtspr   SPRN_HACOP,r3
+#endif /* CONFIG_PPC_WSP_COPRO */
+
+	/* Enable doorbell */
+	mfspr   r3,SPRN_A2_CCR2
+	oris     r3,r3,A2_CCR2_ENABLE_PC@h
+	mtspr   SPRN_A2_CCR2,r3
+	isync
+
+	/* Setup CCR0 to disable power saving for now as it's busted
+	 * in the current implementations. Setup CCR1 to wake on
+	 * interrupts normally (we write the default value but who
+	 * knows what FW may have clobbered...)
+	 */
+	li	r3,0
+	mtspr	SPRN_A2_CCR0, r3
+	LOAD_REG_IMMEDIATE(r3,0x0f0f0f0f)
+	mtspr	SPRN_A2_CCR1, r3
+
+	/* Initialise MMUCR1 */
+	lis	r3,INITIAL_MMUCR1@h
+	ori	r3,r3,INITIAL_MMUCR1@l
+	mtspr	SPRN_MMUCR1,r3
+
+	/* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
+	LOAD_REG_IMMEDIATE(r3, 0x000a7531)
+	mtspr	SPRN_MMUCR2,r3
+
+	/* Set MMUCR3 to write all thids bit to the TLB */
+	LOAD_REG_IMMEDIATE(r3, 0x0000000f)
+	mtspr	SPRN_MMUCR3,r3
+
+	/* Don't do ERAT stuff if running guest mode */
+	mfmsr	r3
+	andis.	r0,r3,MSR_GS@h
+	bne	1f
+
+	/* Now set the I-ERAT watermark to 15 */
+	lis	r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
+	mtspr	SPRN_MMUCR0, r4
+	li	r4,A2_IERAT_SIZE-1
+	PPC_ERATWE(r4,r4,3)
+
+	/* Now set the D-ERAT watermark to 31 */
+	lis	r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
+	mtspr	SPRN_MMUCR0, r4
+	li	r4,A2_DERAT_SIZE-1
+	PPC_ERATWE(r4,r4,3)
+
+	/* And invalidate the beast just in case. That won't get rid of
+	 * a bolted entry though it will be in LRU and so will go away eventually
+	 * but let's not bother for now
+	 */
+	PPC_ERATILX(0,0,0)
+1:
+	blr
+
+_GLOBAL(__restore_cpu_a2)
+	b	__setup_cpu_a2

arch/powerpc/kernel/cpu_setup_fsl_booke.S

@@ -88,6 +88,9 @@ _GLOBAL(__setup_cpu_e5500)
 	bl	__e500_dcache_setup
 #ifdef CONFIG_PPC_BOOK3E_64
 	bl	.__setup_base_ivors
+	bl	.setup_perfmon_ivor
+	bl	.setup_doorbell_ivors
+	bl	.setup_ehv_ivors
 #else
 	bl	__setup_e500mc_ivors
 #endif

arch/powerpc/kernel/cpu_setup_power7.S

@@ -0,0 +1,91 @@
+/*
+ * This file contains low level CPU setup functions.
+ *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+
+/* Entry: r3 = crap, r4 = ptr to cputable entry
+ *
+ * Note that we can be called twice for pseudo-PVRs
+ */
+_GLOBAL(__setup_cpu_power7)
+	mflr	r11
+	bl	__init_hvmode_206
+	mtlr	r11
+	beqlr
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	bl	__init_LPCR
+	bl	__init_TLB
+	mtlr	r11
+	blr
+
+_GLOBAL(__restore_cpu_power7)
+	mflr	r11
+	mfmsr	r3
+	rldicl.	r0,r3,4,63
+	beqlr
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	bl	__init_LPCR
+	bl	__init_TLB
+	mtlr	r11
+	blr
+
+__init_hvmode_206:
+	/* Disable CPU_FTR_HVMODE_206 and exit if MSR:HV is not set */
+	mfmsr	r3
+	rldicl.	r0,r3,4,63
+	bnelr
+	ld	r5,CPU_SPEC_FEATURES(r4)
+	LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE_206)
+	xor	r5,r5,r6
+	std	r5,CPU_SPEC_FEATURES(r4)
+	blr
+
+__init_LPCR:
+	/* Setup a sane LPCR:
+	 *
+	 *   LPES = 0b01 (HSRR0/1 used for 0x500)
+	 *   PECE = 0b111
+	 *   DPFD = 4
+	 *
+	 * Other bits untouched for now
+	 */
+	mfspr	r3,SPRN_LPCR
+	ori	r3,r3,(LPCR_LPES0|LPCR_LPES1)
+	xori	r3,r3, LPCR_LPES0
+	ori	r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
+	li	r5,7
+	sldi	r5,r5,LPCR_DPFD_SH
+	andc	r3,r3,r5
+	li	r5,4
+	sldi	r5,r5,LPCR_DPFD_SH
+	or	r3,r3,r5
+	mtspr	SPRN_LPCR,r3
+	isync
+	blr
+
+__init_TLB:
+	/* Clear the TLB */
+	li	r6,128
+	mtctr	r6
+	li	r7,0xc00	/* IS field = 0b11 */
+	ptesync
+2:	tlbiel	r7
+	addi	r7,r7,0x1000
+	bdnz	2b
+	ptesync
+1:	blr

arch/powerpc/kernel/cputable.c

@@ -62,10 +62,12 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_a2(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_pa6t(void);
 extern void __restore_cpu_ppc970(void);
 extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_power7(void);
+extern void __restore_cpu_a2(void);
 #endif /* CONFIG_PPC64 */
 #if defined(CONFIG_E500)
 extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec);
@@ -199,7 +201,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER4 (gp)",
 		.cpu_features		= CPU_FTRS_POWER4,
 		.cpu_user_features	= COMMON_USER_POWER4,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER4,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -214,7 +216,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER4+ (gq)",
 		.cpu_features		= CPU_FTRS_POWER4,
 		.cpu_user_features	= COMMON_USER_POWER4,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER4,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -230,7 +232,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -248,7 +250,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -284,7 +286,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -302,7 +304,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -318,7 +320,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER5 (gr)",
 		.cpu_features		= CPU_FTRS_POWER5,
 		.cpu_user_features	= COMMON_USER_POWER5,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER5,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -338,7 +340,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER5+ (gs)",
 		.cpu_features		= CPU_FTRS_POWER5,
 		.cpu_user_features	= COMMON_USER_POWER5_PLUS,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER5,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -354,7 +356,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER5+ (gs)",
 		.cpu_features		= CPU_FTRS_POWER5,
 		.cpu_user_features	= COMMON_USER_POWER5_PLUS,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER5,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -371,7 +373,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER5+",
 		.cpu_features		= CPU_FTRS_POWER5,
 		.cpu_user_features	= COMMON_USER_POWER5_PLUS,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER5,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
@@ -385,7 +387,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_POWER6,
 		.cpu_user_features	= COMMON_USER_POWER6 |
 			PPC_FEATURE_POWER6_EXT,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER6,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -404,7 +406,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER6 (architected)",
 		.cpu_features		= CPU_FTRS_POWER6,
 		.cpu_user_features	= COMMON_USER_POWER6,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER6,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
@@ -417,12 +419,13 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7 (architected)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE |
-			MMU_FTR_TLBIE_206,
+		.mmu_features		= MMU_FTRS_POWER7,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
+		.cpu_setup		= __setup_cpu_power7,
+		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7",
 	},
 	{	/* Power7 */
@@ -431,14 +434,15 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7 (raw)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE |
-			MMU_FTR_TLBIE_206,
+		.mmu_features		= MMU_FTRS_POWER7,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power7",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.cpu_setup		= __setup_cpu_power7,
+		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7",
 	},
 	{	/* Power7+ */
@@ -447,14 +451,15 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7+ (raw)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE |
-			MMU_FTR_TLBIE_206,
+		.mmu_features		= MMU_FTRS_POWER7,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power7",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.cpu_setup		= __setup_cpu_power7,
+		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7+",
 	},
 	{	/* Cell Broadband Engine */
@@ -465,7 +470,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_user_features	= COMMON_USER_PPC64 |
 			PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP |
 			PPC_FEATURE_SMT,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_CELL,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 4,
@@ -480,7 +485,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "PA6T",
 		.cpu_features		= CPU_FTRS_PA6T,
 		.cpu_user_features	= COMMON_USER_PA6T,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PA6T,
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
 		.num_pmcs		= 6,
@@ -497,7 +502,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER4 (compatible)",
 		.cpu_features		= CPU_FTRS_COMPATIBLE,
 		.cpu_user_features	= COMMON_USER_PPC64,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_DEFAULT_HPTE_ARCH_V2,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -2005,7 +2010,22 @@ static struct cpu_spec __initdata cpu_specs[] = {
 #endif /* CONFIG_PPC32 */
 #endif /* CONFIG_E500 */
 
-#ifdef CONFIG_PPC_BOOK3E_64
+#ifdef CONFIG_PPC_A2
+	{	/* Standard A2 (>= DD2) + FPU core */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00480000,
+		.cpu_name		= "A2 (>= DD2)",
+		.cpu_features		= CPU_FTRS_A2,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.mmu_features		= MMU_FTRS_A2,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 0,
+		.cpu_setup		= __setup_cpu_a2,
+		.cpu_restore		= __restore_cpu_a2,
+		.machine_check		= machine_check_generic,
+		.platform		= "ppca2",
+	},
 	{	/* This is a default entry to get going, to be replaced by
 		 * a real one at some stage
 		 */
@@ -2026,7 +2046,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "power6",
 	},
-#endif
+#endif /* CONFIG_PPC_A2 */
 };
 
 static struct cpu_spec the_cpu_spec;

arch/powerpc/kernel/crash.c

@@ -64,9 +64,9 @@ void crash_ipi_callback(struct pt_regs *regs)
 		return;
 
 	hard_irq_disable();
-	if (!cpu_isset(cpu, cpus_in_crash))
+	if (!cpumask_test_cpu(cpu, &cpus_in_crash))
 		crash_save_cpu(regs, cpu);
-	cpu_set(cpu, cpus_in_crash);
+	cpumask_set_cpu(cpu, &cpus_in_crash);
 
 	/*
 	 * Entered via soft-reset - could be the kdump
@@ -77,8 +77,8 @@ void crash_ipi_callback(struct pt_regs *regs)
 	 * Tell the kexec CPU that entered via soft-reset and ready
 	 * to go down.
 	 */
-	if (cpu_isset(cpu, cpus_in_sr)) {
-		cpu_clear(cpu, cpus_in_sr);
+	if (cpumask_test_cpu(cpu, &cpus_in_sr)) {
+		cpumask_clear_cpu(cpu, &cpus_in_sr);
 		atomic_inc(&enter_on_soft_reset);
 	}
 
@@ -87,7 +87,7 @@ void crash_ipi_callback(struct pt_regs *regs)
 	 * This barrier is needed to make sure that all CPUs are stopped.
 	 * If not, soft-reset will be invoked to bring other CPUs.
 	 */
-	while (!cpu_isset(crashing_cpu, cpus_in_crash))
+	while (!cpumask_test_cpu(crashing_cpu, &cpus_in_crash))
 		cpu_relax();
 
 	if (ppc_md.kexec_cpu_down)
@@ -109,7 +109,7 @@ static void crash_soft_reset_check(int cpu)
 {
 	unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
 
-	cpu_clear(cpu, cpus_in_sr);
+	cpumask_clear_cpu(cpu, &cpus_in_sr);
 	while (atomic_read(&enter_on_soft_reset) != ncpus)
 		cpu_relax();
 }
@@ -132,7 +132,7 @@ static void crash_kexec_prepare_cpus(int cpu)
 	 */
 	printk(KERN_EMERG "Sending IPI to other cpus...\n");
 	msecs = 10000;
-	while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {
+	while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) {
 		cpu_relax();
 		mdelay(1);
 	}
@@ -144,52 +144,24 @@ static void crash_kexec_prepare_cpus(int cpu)
 	 * user to do soft reset such that we get all.
 	 * Soft-reset will be used until better mechanism is implemented.
 	 */
-	if (cpus_weight(cpus_in_crash) < ncpus) {
+	if (cpumask_weight(&cpus_in_crash) < ncpus) {
 		printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n",
-			ncpus - cpus_weight(cpus_in_crash));
+			ncpus - cpumask_weight(&cpus_in_crash));
 		printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n");
-		cpus_in_sr = CPU_MASK_NONE;
+		cpumask_clear(&cpus_in_sr);
 		atomic_set(&enter_on_soft_reset, 0);
-		while (cpus_weight(cpus_in_crash) < ncpus)
+		while (cpumask_weight(&cpus_in_crash) < ncpus)
 			cpu_relax();
 	}
 	/*
 	 * Make sure all CPUs are entered via soft-reset if the kdump is
 	 * invoked using soft-reset.
 	 */
-	if (cpu_isset(cpu, cpus_in_sr))
+	if (cpumask_test_cpu(cpu, &cpus_in_sr))
 		crash_soft_reset_check(cpu);
 	/* Leave the IPI callback set */
 }
 
-/* wait for all the CPUs to hit real mode but timeout if they don't come in */
-#ifdef CONFIG_PPC_STD_MMU_64
-static void crash_kexec_wait_realmode(int cpu)
-{
-	unsigned int msecs;
-	int i;
-
-	msecs = 10000;
-	for (i=0; i < NR_CPUS && msecs > 0; i++) {
-		if (i == cpu)
-			continue;
-
-		while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
-			barrier();
-			if (!cpu_possible(i)) {
-				break;
-			}
-			if (!cpu_online(i)) {
-				break;
-			}
-			msecs--;
-			mdelay(1);
-		}
-	}
-	mb();
-}
-#endif	/* CONFIG_PPC_STD_MMU_64 */
-
 /*
  * This function will be called by secondary cpus or by kexec cpu
  * if soft-reset is activated to stop some CPUs.
@@ -210,7 +182,7 @@ void crash_kexec_secondary(struct pt_regs *regs)
 			 * exited using 'x'(exit and recover) or
 			 * kexec_should_crash() failed for all running tasks.
 			 */
-			cpu_clear(cpu, cpus_in_sr);
+			cpumask_clear_cpu(cpu, &cpus_in_sr);
 			local_irq_restore(flags);
 			return;
 		}
@@ -224,7 +196,7 @@ void crash_kexec_secondary(struct pt_regs *regs)
 		 * then start kexec boot.
 		 */
 		crash_soft_reset_check(cpu);
-		cpu_set(crashing_cpu, cpus_in_crash);
+		cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
 		if (ppc_md.kexec_cpu_down)
 			ppc_md.kexec_cpu_down(1, 0);
 		machine_kexec(kexec_crash_image);
@@ -234,7 +206,6 @@ void crash_kexec_secondary(struct pt_regs *regs)
 }
 
 #else	/* ! CONFIG_SMP */
-static inline void crash_kexec_wait_realmode(int cpu) {}
 
 static void crash_kexec_prepare_cpus(int cpu)
 {
@@ -253,10 +224,40 @@ static void crash_kexec_prepare_cpus(int cpu)
 
 void crash_kexec_secondary(struct pt_regs *regs)
 {
-	cpus_in_sr = CPU_MASK_NONE;
+	cpumask_clear(&cpus_in_sr);
 }
 #endif	/* CONFIG_SMP */
 
+/* wait for all the CPUs to hit real mode but timeout if they don't come in */
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC_STD_MMU_64)
+static void crash_kexec_wait_realmode(int cpu)
+{
+	unsigned int msecs;
+	int i;
+
+	msecs = 10000;
+	for (i=0; i < nr_cpu_ids && msecs > 0; i++) {
+		if (i == cpu)
+			continue;
+
+		while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
+			barrier();
+			if (!cpu_possible(i)) {
+				break;
+			}
+			if (!cpu_online(i)) {
+				break;
+			}
+			msecs--;
+			mdelay(1);
+		}
+	}
+	mb();
+}
+#else
+static inline void crash_kexec_wait_realmode(int cpu) {}
+#endif	/* CONFIG_SMP && CONFIG_PPC_STD_MMU_64 */
+
 /*
  * Register a function to be called on shutdown.  Only use this if you
  * can't reset your device in the second kernel.
@@ -345,7 +346,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	crashing_cpu = smp_processor_id();
 	crash_save_cpu(regs, crashing_cpu);
 	crash_kexec_prepare_cpus(crashing_cpu);
-	cpu_set(crashing_cpu, cpus_in_crash);
+	cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
 	crash_kexec_wait_realmode(crashing_cpu);
 
 	machine_kexec_mask_interrupts();

arch/powerpc/kernel/dbell.c

@@ -13,84 +13,35 @@
 #include <linux/kernel.h>
 #include <linux/smp.h>
 #include <linux/threads.h>
-#include <linux/percpu.h>
+#include <linux/hardirq.h>
 
 #include <asm/dbell.h>
 #include <asm/irq_regs.h>
 
 #ifdef CONFIG_SMP
-struct doorbell_cpu_info {
-	unsigned long	messages;	/* current messages bits */
-	unsigned int	tag;		/* tag value */
-};
-
-static DEFINE_PER_CPU(struct doorbell_cpu_info, doorbell_cpu_info);
-
 void doorbell_setup_this_cpu(void)
 {
-	struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
+	unsigned long tag = mfspr(SPRN_PIR) & 0x3fff;
 
-	info->messages = 0;
-	info->tag = mfspr(SPRN_PIR) & 0x3fff;
+	smp_muxed_ipi_set_data(smp_processor_id(), tag);
 }
 
-void doorbell_message_pass(int target, int msg)
+void doorbell_cause_ipi(int cpu, unsigned long data)
 {
-	struct doorbell_cpu_info *info;
-	int i;
-
-	if (target < NR_CPUS) {
-		info = &per_cpu(doorbell_cpu_info, target);
-		set_bit(msg, &info->messages);
-		ppc_msgsnd(PPC_DBELL, 0, info->tag);
-	}
-	else if (target == MSG_ALL_BUT_SELF) {
-		for_each_online_cpu(i) {
-			if (i == smp_processor_id())
-				continue;
-			info = &per_cpu(doorbell_cpu_info, i);
-			set_bit(msg, &info->messages);
-			ppc_msgsnd(PPC_DBELL, 0, info->tag);
-		}
-	}
-	else { /* target == MSG_ALL */
-		for_each_online_cpu(i) {
-			info = &per_cpu(doorbell_cpu_info, i);
-			set_bit(msg, &info->messages);
-		}
-		ppc_msgsnd(PPC_DBELL, PPC_DBELL_MSG_BRDCAST, 0);
-	}
+	ppc_msgsnd(PPC_DBELL, 0, data);
 }
 
 void doorbell_exception(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
-	int msg;
 
-	/* Warning: regs can be NULL when called from irq enable */
+	irq_enter();
 
-	if (!info->messages || (num_online_cpus() < 2))
-		goto out;
+	smp_ipi_demux();
 
-	for (msg = 0; msg < 4; msg++)
-		if (test_and_clear_bit(msg, &info->messages))
-			smp_message_recv(msg);
-
-out:
+	irq_exit();
 	set_irq_regs(old_regs);
 }
-
-void doorbell_check_self(void)
-{
-	struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
-
-	if (!info->messages)
-		return;
-
-	ppc_msgsnd(PPC_DBELL, 0, info->tag);
-}
-
 #else /* CONFIG_SMP */
 void doorbell_exception(struct pt_regs *regs)
 {

arch/powerpc/kernel/entry_64.S

@@ -421,6 +421,12 @@ BEGIN_FTR_SECTION
 	std	r24,THREAD_VRSAVE(r3)
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	mfspr	r25,SPRN_DSCR
+	std	r25,THREAD_DSCR(r3)
+END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
+#endif
 	and.	r0,r0,r22
 	beq+	1f
 	andc	r22,r22,r0
@@ -462,10 +468,10 @@ BEGIN_FTR_SECTION
   FTR_SECTION_ELSE_NESTED(95)
 	clrrdi	r6,r8,40	/* get its 1T ESID */
 	clrrdi	r9,r1,40	/* get current sp 1T ESID */
-  ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_1T_SEGMENT, 95)
+  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_1T_SEGMENT, 95)
 FTR_SECTION_ELSE
 	b	2f
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_SLB)
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_SLB)
 	clrldi.	r0,r6,2		/* is new ESID c00000000? */
 	cmpd	cr1,r6,r9	/* or is new ESID the same as current ESID? */
 	cror	eq,4*cr1+eq,eq
@@ -479,7 +485,7 @@ BEGIN_FTR_SECTION
 	li	r9,MMU_SEGSIZE_1T	/* insert B field */
 	oris	r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h
 	rldimi	r7,r9,SLB_VSID_SSIZE_SHIFT,0
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 
 	/* Update the last bolted SLB.  No write barriers are needed
 	 * here, provided we only update the current CPU's SLB shadow
@@ -491,7 +497,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
 	std	r7,SLBSHADOW_STACKVSID(r9)  /* Save VSID */
 	std	r0,SLBSHADOW_STACKESID(r9)  /* Save ESID */
 
-	/* No need to check for CPU_FTR_NO_SLBIE_B here, since when
+	/* No need to check for MMU_FTR_NO_SLBIE_B here, since when
 	 * we have 1TB segments, the only CPUs known to have the errata
 	 * only support less than 1TB of system memory and we'll never
 	 * actually hit this code path.
@@ -522,6 +528,15 @@ BEGIN_FTR_SECTION
 	mtspr	SPRN_VRSAVE,r0		/* if G4, restore VRSAVE reg */
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	ld	r0,THREAD_DSCR(r4)
+	cmpd	r0,r25
+	beq	1f
+	mtspr	SPRN_DSCR,r0
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
+#endif
 
 	/* r3-r13 are destroyed -- Cort */
 	REST_8GPRS(14, r1)
@@ -838,7 +853,7 @@ _GLOBAL(enter_rtas)
 
 _STATIC(rtas_return_loc)
 	/* relocation is off at this point */
-	mfspr	r4,SPRN_SPRG_PACA	/* Get PACA */
+	GET_PACA(r4)
 	clrldi	r4,r4,2			/* convert to realmode address */
 
 	bcl	20,31,$+4
@@ -869,7 +884,7 @@ _STATIC(rtas_restore_regs)
 	REST_8GPRS(14, r1)		/* Restore the non-volatiles */
 	REST_10GPRS(22, r1)		/* ditto */
 
-	mfspr	r13,SPRN_SPRG_PACA
+	GET_PACA(r13)
 
 	ld	r4,_CCR(r1)
 	mtcr	r4

arch/powerpc/kernel/exceptions-64e.S

@@ -17,6 +17,7 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/thread_info.h>
+#include <asm/reg_a2.h>
 #include <asm/exception-64e.h>
 #include <asm/bug.h>
 #include <asm/irqflags.h>
@@ -252,9 +253,6 @@ exception_marker:
 	.balign	0x1000
 	.globl interrupt_base_book3e
 interrupt_base_book3e:					/* fake trap */
-	/* Note: If real debug exceptions are supported by the HW, the vector
-	 * below will have to be patched up to point to an appropriate handler
-	 */
 	EXCEPTION_STUB(0x000, machine_check)		/* 0x0200 */
 	EXCEPTION_STUB(0x020, critical_input)		/* 0x0580 */
 	EXCEPTION_STUB(0x040, debug_crit)		/* 0x0d00 */
@@ -271,8 +269,13 @@ interrupt_base_book3e:					/* fake trap */
 	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
 	EXCEPTION_STUB(0x1c0, data_tlb_miss)
 	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+	EXCEPTION_STUB(0x260, perfmon)
 	EXCEPTION_STUB(0x280, doorbell)
 	EXCEPTION_STUB(0x2a0, doorbell_crit)
+	EXCEPTION_STUB(0x2c0, guest_doorbell)
+	EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
+	EXCEPTION_STUB(0x300, hypercall)
+	EXCEPTION_STUB(0x320, ehpriv)
 
 	.globl interrupt_end_book3e
 interrupt_end_book3e:
@@ -454,6 +457,70 @@ interrupt_end_book3e:
 kernel_dbg_exc:
 	b	.	/* NYI */
 
+/* Debug exception as a debug interrupt*/
+	START_EXCEPTION(debug_debug);
+	DBG_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
+
+	/*
+	 * If there is a single step or branch-taken exception in an
+	 * exception entry sequence, it was probably meant to apply to
+	 * the code where the exception occurred (since exception entry
+	 * doesn't turn off DE automatically).  We simulate the effect
+	 * of turning off DE on entry to an exception handler by turning
+	 * off DE in the DSRR1 value and clearing the debug status.
+	 */
+
+	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
+	andis.	r15,r14,DBSR_IC@h
+	beq+	1f
+
+	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
+	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+	cmpld	cr0,r10,r14
+	cmpld	cr1,r10,r15
+	blt+	cr0,1f
+	bge+	cr1,1f
+
+	/* here it looks like we got an inappropriate debug exception. */
+	lis	r14,DBSR_IC@h		/* clear the IC event */
+	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the DSRR1 value */
+	mtspr	SPRN_DBSR,r14
+	mtspr	SPRN_DSRR1,r11
+	lwz	r10,PACA_EXDBG+EX_CR(r13)	/* restore registers */
+	ld	r1,PACA_EXDBG+EX_R1(r13)
+	ld	r14,PACA_EXDBG+EX_R14(r13)
+	ld	r15,PACA_EXDBG+EX_R15(r13)
+	mtcr	r10
+	ld	r10,PACA_EXDBG+EX_R10(r13)	/* restore registers */
+	ld	r11,PACA_EXDBG+EX_R11(r13)
+	mfspr	r13,SPRN_SPRG_DBG_SCRATCH
+	rfdi
+
+	/* Normal debug exception */
+	/* XXX We only handle coming from userspace for now since we can't
+	 *     quite save properly an interrupted kernel state yet
+	 */
+1:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
+	beq	kernel_dbg_exc;		/* if from kernel mode */
+
+	/* Now we mash up things to make it look like we are coming on a
+	 * normal exception
+	 */
+	mfspr	r15,SPRN_SPRG_DBG_SCRATCH
+	mtspr	SPRN_SPRG_GEN_SCRATCH,r15
+	mfspr	r14,SPRN_DBSR
+	EXCEPTION_COMMON(0xd00, PACA_EXDBG, INTS_DISABLE_ALL)
+	std	r14,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r14
+	ld	r14,PACA_EXDBG+EX_R14(r13)
+	ld	r15,PACA_EXDBG+EX_R15(r13)
+	bl	.save_nvgprs
+	bl	.DebugException
+	b	.ret_from_except
+
+	MASKABLE_EXCEPTION(0x260, perfmon, .performance_monitor_exception, ACK_NONE)
+
 /* Doorbell interrupt */
 	MASKABLE_EXCEPTION(0x2070, doorbell, .doorbell_exception, ACK_NONE)
 
@@ -468,6 +535,11 @@ kernel_dbg_exc:
 //	b	ret_from_crit_except
 	b	.
 
+	MASKABLE_EXCEPTION(0x2c0, guest_doorbell, .unknown_exception, ACK_NONE)
+	MASKABLE_EXCEPTION(0x2e0, guest_doorbell_crit, .unknown_exception, ACK_NONE)
+	MASKABLE_EXCEPTION(0x310, hypercall, .unknown_exception, ACK_NONE)
+	MASKABLE_EXCEPTION(0x320, ehpriv, .unknown_exception, ACK_NONE)
+
 
 /*
  * An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -587,7 +659,12 @@ fast_exception_return:
 BAD_STACK_TRAMPOLINE(0x000)
 BAD_STACK_TRAMPOLINE(0x100)
 BAD_STACK_TRAMPOLINE(0x200)
+BAD_STACK_TRAMPOLINE(0x260)
+BAD_STACK_TRAMPOLINE(0x2c0)
+BAD_STACK_TRAMPOLINE(0x2e0)
 BAD_STACK_TRAMPOLINE(0x300)
+BAD_STACK_TRAMPOLINE(0x310)
+BAD_STACK_TRAMPOLINE(0x320)
 BAD_STACK_TRAMPOLINE(0x400)
 BAD_STACK_TRAMPOLINE(0x500)
 BAD_STACK_TRAMPOLINE(0x600)
@@ -864,8 +941,23 @@ have_hes:
 	 * that will have to be made dependent on whether we are running under
 	 * a hypervisor I suppose.
 	 */
-	ori	r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS
-	mtspr	SPRN_MAS0,r3
+
+	/* BEWARE, MAGIC
+	 * This code is called as an ordinary function on the boot CPU. But to
+	 * avoid duplication, this code is also used in SCOM bringup of
+	 * secondary CPUs. We read the code between the initial_tlb_code_start
+	 * and initial_tlb_code_end labels one instruction at a time and RAM it
+	 * into the new core via SCOM. That doesn't process branches, so there
+	 * must be none between those two labels. It also means if this code
+	 * ever takes any parameters, the SCOM code must also be updated to
+	 * provide them.
+	 */
+	.globl a2_tlbinit_code_start
+a2_tlbinit_code_start:
+
+	ori	r11,r3,MAS0_WQ_ALLWAYS
+	oris	r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
+	mtspr	SPRN_MAS0,r11
 	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
 	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
 	mtspr	SPRN_MAS1,r3
@@ -879,18 +971,86 @@ have_hes:
 	/* Write the TLB entry */
 	tlbwe
 
+	.globl a2_tlbinit_after_linear_map
+a2_tlbinit_after_linear_map:
+
 	/* Now we branch the new virtual address mapped by this entry */
 	LOAD_REG_IMMEDIATE(r3,1f)
 	mtctr	r3
 	bctr
 
 1:	/* We are now running at PAGE_OFFSET, clean the TLB of everything
-	 * else (XXX we should scan for bolted crap from the firmware too)
+	 * else (including IPROTed things left by firmware)
+	 * r4 = TLBnCFG
+	 * r3 = current address (more or less)
 	 */
+
+	li	r5,0
+	mtspr	SPRN_MAS6,r5
+	tlbsx	0,r3
+
+	rlwinm	r9,r4,0,TLBnCFG_N_ENTRY
+	rlwinm	r10,r4,8,0xff
+	addi	r10,r10,-1	/* Get inner loop mask */
+
+	li	r3,1
+
+	mfspr	r5,SPRN_MAS1
+	rlwinm	r5,r5,0,(~(MAS1_VALID|MAS1_IPROT))
+
+	mfspr	r6,SPRN_MAS2
+	rldicr	r6,r6,0,51		/* Extract EPN */
+
+	mfspr	r7,SPRN_MAS0
+	rlwinm	r7,r7,0,0xffff0fff	/* Clear HES and WQ */
+
+	rlwinm	r8,r7,16,0xfff		/* Extract ESEL */
+
+2:	add	r4,r3,r8
+	and	r4,r4,r10
+
+	rlwimi	r7,r4,16,MAS0_ESEL_MASK
+
+	mtspr	SPRN_MAS0,r7
+	mtspr	SPRN_MAS1,r5
+	mtspr	SPRN_MAS2,r6
+	tlbwe
+
+	addi	r3,r3,1
+	and.	r4,r3,r10
+
+	bne	3f
+	addis	r6,r6,(1<<30)@h
+3:
+	cmpw	r3,r9
+	blt	2b
+
+	.globl  a2_tlbinit_after_iprot_flush
+a2_tlbinit_after_iprot_flush:
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
+	/* Now establish early debug mappings if applicable */
+	/* Restore the MAS0 we used for linear mapping load */
+	mtspr	SPRN_MAS0,r11
+
+	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
+	ori	r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT)
+	mtspr	SPRN_MAS1,r3
+	LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G)
+	mtspr	SPRN_MAS2,r3
+	LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW)
+	mtspr	SPRN_MAS7_MAS3,r3
+	/* re-use the MAS8 value from the linear mapping */
+	tlbwe
+#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
+
 	PPC_TLBILX(0,0,0)
 	sync
 	isync
 
+	.globl a2_tlbinit_code_end
+a2_tlbinit_code_end:
+
 	/* We translate LR and return */
 	mflr	r3
 	tovirt(r3,r3)
@@ -1040,3 +1200,33 @@ _GLOBAL(__setup_base_ivors)
 	sync
 
 	blr
+
+_GLOBAL(setup_perfmon_ivor)
+	SET_IVOR(35, 0x260) /* Performance Monitor */
+	blr
+
+_GLOBAL(setup_doorbell_ivors)
+	SET_IVOR(36, 0x280) /* Processor Doorbell */
+	SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
+
+	/* Check MMUCFG[LPIDSIZE] to determine if we have category E.HV */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beqlr
+
+	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
+	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
+	blr
+
+_GLOBAL(setup_ehv_ivors)
+	/*
+	 * We may be running as a guest and lack E.HV even on a chip
+	 * that normally has it.
+	 */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beqlr
+
+	SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
+	SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
+	blr

arch/powerpc/kernel/exceptions-64s.S

@@ -37,23 +37,51 @@
 	.globl __start_interrupts
 __start_interrupts:
 
-	STD_EXCEPTION_PSERIES(0x100, system_reset)
+	.globl system_reset_pSeries;
+system_reset_pSeries:
+	HMT_MEDIUM;
+	DO_KVM	0x100;
+	SET_SCRATCH0(r13)
+#ifdef CONFIG_PPC_P7_NAP
+BEGIN_FTR_SECTION
+	/* Running native on arch 2.06 or later, check if we are
+	 * waking up from nap. We only handle no state loss and
+	 * supervisor state loss. We do -not- handle hypervisor
+	 * state loss at this time.
+	 */
+	mfspr	r13,SPRN_SRR1
+	rlwinm	r13,r13,47-31,30,31
+	cmpwi	cr0,r13,1
+	bne	1f
+	b	.power7_wakeup_noloss
+1:	cmpwi	cr0,r13,2
+	bne	1f
+	b	.power7_wakeup_loss
+	/* Total loss of HV state is fatal, we could try to use the
+	 * PIR to locate a PACA, then use an emergency stack etc...
+	 * but for now, let's just stay stuck here
+	 */
+1:	cmpwi	cr0,r13,3
+	beq	.
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE_206)
+#endif /* CONFIG_PPC_P7_NAP */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD)
 
 	. = 0x200
 _machine_check_pSeries:
 	HMT_MEDIUM
 	DO_KVM	0x200
-	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common, EXC_STD)
 
 	. = 0x300
 	.globl data_access_pSeries
 data_access_pSeries:
 	HMT_MEDIUM
 	DO_KVM	0x300
-	mtspr	SPRN_SPRG_SCRATCH0,r13
+	SET_SCRATCH0(r13)
 BEGIN_FTR_SECTION
-	mfspr	r13,SPRN_SPRG_PACA
+	GET_PACA(r13)
 	std	r9,PACA_EXSLB+EX_R9(r13)
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	mfspr	r10,SPRN_DAR
@@ -67,22 +95,22 @@ BEGIN_FTR_SECTION
 	std	r11,PACA_EXGEN+EX_R11(r13)
 	ld	r11,PACA_EXSLB+EX_R9(r13)
 	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r12,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r12)
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	std	r11,PACA_EXGEN+EX_R9(r13)
 	std	r12,PACA_EXGEN+EX_R13(r13)
-	EXCEPTION_PROLOG_PSERIES_1(data_access_common)
+	EXCEPTION_PROLOG_PSERIES_1(data_access_common, EXC_STD)
 FTR_SECTION_ELSE
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
-ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_SLB)
 
 	. = 0x380
 	.globl data_access_slb_pSeries
 data_access_slb_pSeries:
 	HMT_MEDIUM
 	DO_KVM	0x380
-	mtspr	SPRN_SPRG_SCRATCH0,r13
-	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
+	SET_SCRATCH0(r13)
+	GET_PACA(r13)
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_DAR
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
@@ -95,7 +123,7 @@ data_access_slb_pSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r10)
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 #ifndef CONFIG_RELOCATABLE
@@ -113,15 +141,15 @@ data_access_slb_pSeries:
 	bctr
 #endif
 
-	STD_EXCEPTION_PSERIES(0x400, instruction_access)
+	STD_EXCEPTION_PSERIES(0x400, 0x400, instruction_access)
 
 	. = 0x480
 	.globl instruction_access_slb_pSeries
 instruction_access_slb_pSeries:
 	HMT_MEDIUM
 	DO_KVM	0x480
-	mtspr	SPRN_SPRG_SCRATCH0,r13
-	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
+	SET_SCRATCH0(r13)
+	GET_PACA(r13)
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
@@ -134,7 +162,7 @@ instruction_access_slb_pSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r10)
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 #ifndef CONFIG_RELOCATABLE
@@ -147,13 +175,29 @@ instruction_access_slb_pSeries:
 	bctr
 #endif
 
-	MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
-	STD_EXCEPTION_PSERIES(0x600, alignment)
-	STD_EXCEPTION_PSERIES(0x700, program_check)
-	STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
-	MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
-	STD_EXCEPTION_PSERIES(0xa00, trap_0a)
-	STD_EXCEPTION_PSERIES(0xb00, trap_0b)
+	/* We open code these as we can't have a ". = x" (even with
+	 * x = "." within a feature section
+	 */
+	. = 0x500;
+	.globl hardware_interrupt_pSeries;
+	.globl hardware_interrupt_hv;
+hardware_interrupt_pSeries:
+hardware_interrupt_hv:
+	BEGIN_FTR_SECTION
+		_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD)
+	FTR_SECTION_ELSE
+		_MASKABLE_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV)
+	ALT_FTR_SECTION_END_IFCLR(CPU_FTR_HVMODE_206)
+
+	STD_EXCEPTION_PSERIES(0x600, 0x600, alignment)
+	STD_EXCEPTION_PSERIES(0x700, 0x700, program_check)
+	STD_EXCEPTION_PSERIES(0x800, 0x800, fp_unavailable)
+
+	MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer)
+	MASKABLE_EXCEPTION_HV(0x980, 0x980, decrementer)
+
+	STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a)
+	STD_EXCEPTION_PSERIES(0xb00, 0xb00, trap_0b)
 
 	. = 0xc00
 	.globl	system_call_pSeries
@@ -165,13 +209,13 @@ BEGIN_FTR_SECTION
 	beq-	1f
 END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	mr	r9,r13
-	mfspr	r13,SPRN_SPRG_PACA
+	GET_PACA(r13)
 	mfspr	r11,SPRN_SRR0
-	ld	r12,PACAKBASE(r13)
-	ld	r10,PACAKMSR(r13)
-	LOAD_HANDLER(r12, system_call_entry)
-	mtspr	SPRN_SRR0,r12
 	mfspr	r12,SPRN_SRR1
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, system_call_entry)
+	mtspr	SPRN_SRR0,r10
+	ld	r10,PACAKMSR(r13)
 	mtspr	SPRN_SRR1,r10
 	rfid
 	b	.	/* prevent speculative execution */
@@ -183,8 +227,21 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	rfid		/* return to userspace */
 	b	.
 
-	STD_EXCEPTION_PSERIES(0xd00, single_step)
-	STD_EXCEPTION_PSERIES(0xe00, trap_0e)
+	STD_EXCEPTION_PSERIES(0xd00, 0xd00, single_step)
+
+	/* At 0xe??? we have a bunch of hypervisor exceptions, we branch
+	 * out of line to handle them
+	 */
+	. = 0xe00
+	b	h_data_storage_hv
+	. = 0xe20
+	b	h_instr_storage_hv
+	. = 0xe40
+	b	emulation_assist_hv
+	. = 0xe50
+	b	hmi_exception_hv
+	. = 0xe60
+	b	hmi_exception_hv
 
 	/* We need to deal with the Altivec unavailable exception
 	 * here which is at 0xf20, thus in the middle of the
@@ -193,39 +250,42 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	 */
 performance_monitor_pSeries_1:
 	. = 0xf00
-	DO_KVM	0xf00
 	b	performance_monitor_pSeries
 
 altivec_unavailable_pSeries_1:
 	. = 0xf20
-	DO_KVM	0xf20
 	b	altivec_unavailable_pSeries
 
 vsx_unavailable_pSeries_1:
 	. = 0xf40
-	DO_KVM	0xf40
 	b	vsx_unavailable_pSeries
 
 #ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
+	STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
 #endif /* CONFIG_CBE_RAS */
-	STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+	STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
 #ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
+	STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
 #endif /* CONFIG_CBE_RAS */
-	STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+	STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
 #ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
+	STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
 #endif /* CONFIG_CBE_RAS */
 
 	. = 0x3000
 
-/*** pSeries interrupt support ***/
+/*** Out of line interrupts support ***/
+
+	/* moved from 0xe00 */
+	STD_EXCEPTION_HV(., 0xe00, h_data_storage)
+	STD_EXCEPTION_HV(., 0xe20, h_instr_storage)
+	STD_EXCEPTION_HV(., 0xe40, emulation_assist)
+	STD_EXCEPTION_HV(., 0xe60, hmi_exception) /* need to flush cache ? */
 
 	/* moved from 0xf00 */
-	STD_EXCEPTION_PSERIES(., performance_monitor)
-	STD_EXCEPTION_PSERIES(., altivec_unavailable)
-	STD_EXCEPTION_PSERIES(., vsx_unavailable)
+	STD_EXCEPTION_PSERIES(., 0xf00, performance_monitor)
+	STD_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable)
+	STD_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable)
 
 /*
  * An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -240,17 +300,30 @@ masked_interrupt:
 	rotldi	r10,r10,16
 	mtspr	SPRN_SRR1,r10
 	ld	r10,PACA_EXGEN+EX_R10(r13)
-	mfspr	r13,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r13)
 	rfid
 	b	.
 
+masked_Hinterrupt:
+	stb	r10,PACAHARDIRQEN(r13)
+	mtcrf	0x80,r9
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	mfspr	r10,SPRN_HSRR1
+	rldicl	r10,r10,48,1		/* clear MSR_EE */
+	rotldi	r10,r10,16
+	mtspr	SPRN_HSRR1,r10
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	GET_SCRATCH0(r13)
+	hrfid
+	b	.
+
 	.align	7
 do_stab_bolted_pSeries:
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r10)
 	std	r10,PACA_EXSLB+EX_R13(r13)
-	EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted)
+	EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD)
 
 #ifdef CONFIG_PPC_PSERIES
 /*
@@ -260,15 +333,15 @@ do_stab_bolted_pSeries:
       .align 7
 system_reset_fwnmi:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+	SET_SCRATCH0(r13)		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD)
 
 	.globl machine_check_fwnmi
       .align 7
 machine_check_fwnmi:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+	SET_SCRATCH0(r13)		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common, EXC_STD)
 
 #endif /* CONFIG_PPC_PSERIES */
 
@@ -282,7 +355,7 @@ slb_miss_user_pseries:
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	std	r11,PACA_EXGEN+EX_R11(r13)
 	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r10,SPRG_SCRATCH0
+	GET_SCRATCH0(r10)
 	ld	r11,PACA_EXSLB+EX_R9(r13)
 	ld	r12,PACA_EXSLB+EX_R3(r13)
 	std	r10,PACA_EXGEN+EX_R13(r13)
@@ -342,6 +415,8 @@ machine_check_common:
 	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
 	STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
+        STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception)
+        STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
 	STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
 	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
 #ifdef CONFIG_ALTIVEC
@@ -386,9 +461,24 @@ bad_stack:
 	std	r12,_XER(r1)
 	SAVE_GPR(0,r1)
 	SAVE_GPR(2,r1)
-	SAVE_4GPRS(3,r1)
-	SAVE_2GPRS(7,r1)
-	SAVE_10GPRS(12,r1)
+	ld	r10,EX_R3(r3)
+	std	r10,GPR3(r1)
+	SAVE_GPR(4,r1)
+	SAVE_4GPRS(5,r1)
+	ld	r9,EX_R9(r3)
+	ld	r10,EX_R10(r3)
+	SAVE_2GPRS(9,r1)
+	ld	r9,EX_R11(r3)
+	ld	r10,EX_R12(r3)
+	ld	r11,EX_R13(r3)
+	std	r9,GPR11(r1)
+	std	r10,GPR12(r1)
+	std	r11,GPR13(r1)
+BEGIN_FTR_SECTION
+	ld	r10,EX_CFAR(r3)
+	std	r10,ORIG_GPR3(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+	SAVE_8GPRS(14,r1)
 	SAVE_10GPRS(22,r1)
 	lhz	r12,PACA_TRAP_SAVE(r13)
 	std	r12,_TRAP(r1)
@@ -397,6 +487,9 @@ bad_stack:
 	li	r12,0
 	std	r12,0(r11)
 	ld	r2,PACATOC(r13)
+	ld	r11,exception_marker@toc(r2)
+	std	r12,RESULT(r1)
+	std	r11,STACK_FRAME_OVERHEAD-16(r1)
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.kernel_bad_stack
 	b	1b
@@ -419,6 +512,19 @@ data_access_common:
 	li	r5,0x300
 	b	.do_hash_page	 	/* Try to handle as hpte fault */
 
+	.align  7
+        .globl  h_data_storage_common
+h_data_storage_common:
+        mfspr   r10,SPRN_HDAR
+        std     r10,PACA_EXGEN+EX_DAR(r13)
+        mfspr   r10,SPRN_HDSISR
+        stw     r10,PACA_EXGEN+EX_DSISR(r13)
+        EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
+        bl      .save_nvgprs
+        addi    r3,r1,STACK_FRAME_OVERHEAD
+        bl      .unknown_exception
+        b       .ret_from_except
+
 	.align	7
 	.globl instruction_access_common
 instruction_access_common:
@@ -428,6 +534,8 @@ instruction_access_common:
 	li	r5,0x400
 	b	.do_hash_page		/* Try to handle as hpte fault */
 
+        STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
+
 /*
  * Here is the common SLB miss user that is used when going to virtual
  * mode for SLB misses, that is currently not used
@@ -750,7 +858,7 @@ _STATIC(do_hash_page)
 BEGIN_FTR_SECTION
 	andis.	r0,r4,0x0020		/* Is it a segment table fault? */
 	bne-	do_ste_alloc		/* If so handle it */
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
 
 	clrrdi	r11,r1,THREAD_SHIFT
 	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */

arch/powerpc/kernel/head_32.S

@@ -805,19 +805,6 @@ _ENTRY(copy_and_flush)
 	blr
 
 #ifdef CONFIG_SMP
-#ifdef CONFIG_GEMINI
-	.globl	__secondary_start_gemini
-__secondary_start_gemini:
-        mfspr   r4,SPRN_HID0
-        ori     r4,r4,HID0_ICFI
-        li      r3,0
-        ori     r3,r3,HID0_ICE
-        andc    r4,r4,r3
-        mtspr   SPRN_HID0,r4
-        sync
-        b       __secondary_start
-#endif /* CONFIG_GEMINI */
-
 	.globl __secondary_start_mpc86xx
 __secondary_start_mpc86xx:
 	mfspr	r3, SPRN_PIR
@@ -890,15 +877,6 @@ __secondary_start:
 	mtspr	SPRN_SRR1,r4
 	SYNC
 	RFI
-
-_GLOBAL(start_secondary_resume)
-	/* Reset stack */
-	rlwinm	r1,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
-	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
-	li	r3,0
-	std	r3,0(r1)		/* Zero the stack frame pointer	*/
-	bl	start_secondary
-	b	.
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_KVM_BOOK3S_HANDLER

arch/powerpc/kernel/head_64.S

@@ -147,6 +147,8 @@ __secondary_hold:
 	mtctr	r4
 	mr	r3,r24
 	li	r4,0
+	/* Make sure that patched code is visible */
+	isync
 	bctr
 #else
 	BUG_OPCODE
@@ -216,19 +218,25 @@ generic_secondary_common_init:
 	 */
 	LOAD_REG_ADDR(r13, paca)	/* Load paca pointer		 */
 	ld	r13,0(r13)		/* Get base vaddr of paca array	 */
+#ifndef CONFIG_SMP
+	addi	r13,r13,PACA_SIZE	/* know r13 if used accidentally */
+	b	.kexec_wait		/* wait for next kernel if !SMP	 */
+#else
+	LOAD_REG_ADDR(r7, nr_cpu_ids)	/* Load nr_cpu_ids address       */
+	lwz	r7,0(r7)		/* also the max paca allocated 	 */
 	li	r5,0			/* logical cpu id                */
 1:	lhz	r6,PACAHWCPUID(r13)	/* Load HW procid from paca      */
 	cmpw	r6,r24			/* Compare to our id             */
 	beq	2f
 	addi	r13,r13,PACA_SIZE	/* Loop to next PACA on miss     */
 	addi	r5,r5,1
-	cmpwi	r5,NR_CPUS
+	cmpw	r5,r7			/* Check if more pacas exist     */
 	blt	1b
 
 	mr	r3,r24			/* not found, copy phys to r3	 */
 	b	.kexec_wait		/* next kernel might do better	 */
 
-2:	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG */
+2:	SET_PACA(r13)
 #ifdef CONFIG_PPC_BOOK3E
 	addi	r12,r13,PACA_EXTLB	/* and TLB exc frame in another  */
 	mtspr	SPRN_SPRG_TLB_EXFRAME,r12
@@ -236,34 +244,39 @@ generic_secondary_common_init:
 
 	/* From now on, r24 is expected to be logical cpuid */
 	mr	r24,r5
-3:	HMT_LOW
-	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor should */
-					/* start.			 */
-
-#ifndef CONFIG_SMP
-	b	3b			/* Never go on non-SMP		 */
-#else
-	cmpwi	0,r23,0
-	beq	3b			/* Loop until told to go	 */
-
-	sync				/* order paca.run and cur_cpu_spec */
 
 	/* See if we need to call a cpu state restore handler */
 	LOAD_REG_ADDR(r23, cur_cpu_spec)
 	ld	r23,0(r23)
 	ld	r23,CPU_SPEC_RESTORE(r23)
 	cmpdi	0,r23,0
-	beq	4f
+	beq	3f
 	ld	r23,0(r23)
 	mtctr	r23
 	bctrl
 
-4:	/* Create a temp kernel stack for use before relocation is on.	*/
+3:	LOAD_REG_ADDR(r3, boot_cpu_count) /* Decrement boot_cpu_count */
+	lwarx	r4,0,r3
+	subi	r4,r4,1
+	stwcx.	r4,0,r3
+	bne	3b
+	isync
+
+4:	HMT_LOW
+	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor should */
+					/* start.			 */
+	cmpwi	0,r23,0
+	beq	4b			/* Loop until told to go	 */
+
+	sync				/* order paca.run and cur_cpu_spec */
+	isync				/* In case code patching happened */
+
+	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
 	subi	r1,r1,STACK_FRAME_OVERHEAD
 
 	b	__secondary_start
-#endif
+#endif /* SMP */
 
 /*
  * Turn the MMU off.
@@ -534,7 +547,7 @@ _GLOBAL(pmac_secondary_start)
 	ld	r4,0(r4)		/* Get base vaddr of paca array	*/
 	mulli	r13,r24,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r4		/* for this processor.		*/
-	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG*/
+	SET_PACA(r13)			/* Save vaddr of paca in an SPRG*/
 
 	/* Mark interrupts soft and hard disabled (they might be enabled
 	 * in the PACA when doing hotplug)
@@ -645,7 +658,7 @@ _GLOBAL(enable_64b_mode)
 	oris	r11,r11,0x8000		/* CM bit set, we'll set ICM later */
 	mtmsr	r11
 #else /* CONFIG_PPC_BOOK3E */
-	li	r12,(MSR_SF | MSR_ISF)@highest
+	li	r12,(MSR_64BIT | MSR_ISF)@highest
 	sldi	r12,r12,48
 	or	r11,r11,r12
 	mtmsrd	r11

arch/powerpc/kernel/idle_power7.S

@@ -0,0 +1,97 @@
+/*
+ *  This file contains the power_save function for 970-family CPUs.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/ppc-opcode.h>
+
+#undef DEBUG
+
+	.text
+
+_GLOBAL(power7_idle)
+	/* Now check if user or arch enabled NAP mode */
+	LOAD_REG_ADDRBASE(r3,powersave_nap)
+	lwz	r4,ADDROFF(powersave_nap)(r3)
+	cmpwi	0,r4,0
+	beqlr
+
+	/* NAP is a state loss, we create a regs frame on the
+	 * stack, fill it up with the state we care about and
+	 * stick a pointer to it in PACAR1. We really only
+	 * need to save PC, some CR bits and the NV GPRs,
+	 * but for now an interrupt frame will do.
+	 */
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,-INT_FRAME_SIZE(r1)
+	std	r0,_LINK(r1)
+	std	r0,_NIP(r1)
+
+#ifndef CONFIG_SMP
+	/* Make sure FPU, VSX etc... are flushed as we may lose
+	 * state when going to nap mode
+	 */
+	bl	.discard_lazy_cpu_state
+#endif /* CONFIG_SMP */
+
+	/* Hard disable interrupts */
+	mfmsr	r9
+	rldicl	r9,r9,48,1
+	rotldi	r9,r9,16
+	mtmsrd	r9,1			/* hard-disable interrupts */
+	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13)	/* we'll hard-enable shortly */
+	stb	r0,PACAHARDIRQEN(r13)
+
+	/* Continue saving state */
+	SAVE_GPR(2, r1)
+	SAVE_NVGPRS(r1)
+	mfcr	r3
+	std	r3,_CCR(r1)
+	std	r9,_MSR(r1)
+	std	r1,PACAR1(r13)
+
+	/* Magic NAP mode enter sequence */
+	std	r0,0(r1)
+	ptesync
+	ld	r0,0(r1)
+1:	cmp	cr0,r0,r0
+	bne	1b
+	PPC_NAP
+	b	.
+
+_GLOBAL(power7_wakeup_loss)
+	GET_PACA(r13)
+	ld	r1,PACAR1(r13)
+	REST_NVGPRS(r1)
+	REST_GPR(2, r1)
+	ld	r3,_CCR(r1)
+	ld	r4,_MSR(r1)
+	ld	r5,_NIP(r1)
+	addi	r1,r1,INT_FRAME_SIZE
+	mtcr	r3
+	mtspr	SPRN_SRR1,r4
+	mtspr	SPRN_SRR0,r5
+	rfid
+
+_GLOBAL(power7_wakeup_noloss)
+	GET_PACA(r13)
+	ld	r1,PACAR1(r13)
+	ld	r4,_MSR(r1)
+	ld	r5,_NIP(r1)
+	addi	r1,r1,INT_FRAME_SIZE
+	mtspr	SPRN_SRR1,r4
+	mtspr	SPRN_SRR0,r5
+	rfid

arch/powerpc/platforms/cell/io-workarounds.c → arch/powerpc/kernel/io-workarounds.c

@@ -17,8 +17,7 @@
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
 #include <asm/ppc-pci.h>
-
-#include "io-workarounds.h"
+#include <asm/io-workarounds.h>
 
 #define IOWA_MAX_BUS	8
 
@@ -145,7 +144,19 @@ static void __iomem *iowa_ioremap(phys_addr_t addr, unsigned long size,
 	return res;
 }
 
-/* Regist new bus to support workaround */
+/* Enable IO workaround */
+static void __devinit io_workaround_init(void)
+{
+	static int io_workaround_inited;
+
+	if (io_workaround_inited)
+		return;
+	ppc_pci_io = iowa_pci_io;
+	ppc_md.ioremap = iowa_ioremap;
+	io_workaround_inited = 1;
+}
+
+/* Register new bus to support workaround */
 void __devinit iowa_register_bus(struct pci_controller *phb,
 			struct ppc_pci_io *ops,
 			int (*initfunc)(struct iowa_bus *, void *), void *data)
@@ -153,6 +164,8 @@ void __devinit iowa_register_bus(struct pci_controller *phb,
 	struct iowa_bus *bus;
 	struct device_node *np = phb->dn;
 
+	io_workaround_init();
+
 	if (iowa_bus_count >= IOWA_MAX_BUS) {
 		pr_err("IOWA:Too many pci bridges, "
 		       "workarounds disabled for %s\n", np->full_name);
@@ -162,6 +175,7 @@ void __devinit iowa_register_bus(struct pci_controller *phb,
 	bus = &iowa_busses[iowa_bus_count];
 	bus->phb = phb;
 	bus->ops = ops;
+	bus->private = data;
 
 	if (initfunc)
 		if ((*initfunc)(bus, data))
@@ -172,14 +186,3 @@ void __devinit iowa_register_bus(struct pci_controller *phb,
 	pr_debug("IOWA:[%d]Add bus, %s.\n", iowa_bus_count-1, np->full_name);
 }
 
-/* enable IO workaround */
-void __devinit io_workaround_init(void)
-{
-	static int io_workaround_inited;
-
-	if (io_workaround_inited)
-		return;
-	ppc_pci_io = iowa_pci_io;
-	ppc_md.ioremap = iowa_ioremap;
-	io_workaround_inited = 1;
-}

arch/powerpc/kernel/irq.c

@@ -66,7 +66,6 @@
 #include <asm/ptrace.h>
 #include <asm/machdep.h>
 #include <asm/udbg.h>
-#include <asm/dbell.h>
 #include <asm/smp.h>
 
 #ifdef CONFIG_PPC64
@@ -160,7 +159,8 @@ notrace void arch_local_irq_restore(unsigned long en)
 
 #if defined(CONFIG_BOOKE) && defined(CONFIG_SMP)
 	/* Check for pending doorbell interrupts and resend to ourself */
-	doorbell_check_self();
+	if (cpu_has_feature(CPU_FTR_DBELL))
+		smp_muxed_ipi_resend();
 #endif
 
 	/*
@@ -397,24 +397,28 @@ struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly;
 void exc_lvl_ctx_init(void)
 {
 	struct thread_info *tp;
-	int i, hw_cpu;
+	int i, cpu_nr;
 
 	for_each_possible_cpu(i) {
-		hw_cpu = get_hard_smp_processor_id(i);
-		memset((void *)critirq_ctx[hw_cpu], 0, THREAD_SIZE);
-		tp = critirq_ctx[hw_cpu];
-		tp->cpu = i;
+#ifdef CONFIG_PPC64
+		cpu_nr = i;
+#else
+		cpu_nr = get_hard_smp_processor_id(i);
+#endif
+		memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE);
+		tp = critirq_ctx[cpu_nr];
+		tp->cpu = cpu_nr;
 		tp->preempt_count = 0;
 
 #ifdef CONFIG_BOOKE
-		memset((void *)dbgirq_ctx[hw_cpu], 0, THREAD_SIZE);
-		tp = dbgirq_ctx[hw_cpu];
-		tp->cpu = i;
+		memset((void *)dbgirq_ctx[cpu_nr], 0, THREAD_SIZE);
+		tp = dbgirq_ctx[cpu_nr];
+		tp->cpu = cpu_nr;
 		tp->preempt_count = 0;
 
-		memset((void *)mcheckirq_ctx[hw_cpu], 0, THREAD_SIZE);
-		tp = mcheckirq_ctx[hw_cpu];
-		tp->cpu = i;
+		memset((void *)mcheckirq_ctx[cpu_nr], 0, THREAD_SIZE);
+		tp = mcheckirq_ctx[cpu_nr];
+		tp->cpu = cpu_nr;
 		tp->preempt_count = HARDIRQ_OFFSET;
 #endif
 	}
@@ -477,20 +481,41 @@ void do_softirq(void)
  * IRQ controller and virtual interrupts
  */
 
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+	irq_hw_number_t	hwirq;
+	struct irq_host	*host;
+};
+
 static LIST_HEAD(irq_hosts);
 static DEFINE_RAW_SPINLOCK(irq_big_lock);
-static unsigned int revmap_trees_allocated;
 static DEFINE_MUTEX(revmap_trees_mutex);
-struct irq_map_entry irq_map[NR_IRQS];
+static struct irq_map_entry irq_map[NR_IRQS];
 static unsigned int irq_virq_count = NR_IRQS;
 static struct irq_host *irq_default_host;
 
+irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
+{
+	return irq_map[d->irq].hwirq;
+}
+EXPORT_SYMBOL_GPL(irqd_to_hwirq);
+
 irq_hw_number_t virq_to_hw(unsigned int virq)
 {
 	return irq_map[virq].hwirq;
 }
 EXPORT_SYMBOL_GPL(virq_to_hw);
 
+bool virq_is_host(unsigned int virq, struct irq_host *host)
+{
+	return irq_map[virq].host == host;
+}
+EXPORT_SYMBOL_GPL(virq_is_host);
+
 static int default_irq_host_match(struct irq_host *h, struct device_node *np)
 {
 	return h->of_node != NULL && h->of_node == np;
@@ -511,7 +536,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	/* Allocate structure and revmap table if using linear mapping */
 	if (revmap_type == IRQ_HOST_MAP_LINEAR)
 		size += revmap_arg * sizeof(unsigned int);
-	host = zalloc_maybe_bootmem(size, GFP_KERNEL);
+	host = kzalloc(size, GFP_KERNEL);
 	if (host == NULL)
 		return NULL;
 
@@ -561,14 +586,14 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 			irq_map[i].host = host;
 			smp_wmb();
 
-			/* Clear norequest flags */
-			irq_clear_status_flags(i, IRQ_NOREQUEST);
-
 			/* Legacy flags are left to default at this point,
 			 * one can then use irq_create_mapping() to
 			 * explicitly change them
 			 */
 			ops->map(host, i, i);
+
+			/* Clear norequest flags */
+			irq_clear_status_flags(i, IRQ_NOREQUEST);
 		}
 		break;
 	case IRQ_HOST_MAP_LINEAR:
@@ -579,6 +604,9 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 		smp_wmb();
 		host->revmap_data.linear.revmap = rmap;
 		break;
+	case IRQ_HOST_MAP_TREE:
+		INIT_RADIX_TREE(&host->revmap_data.tree, GFP_KERNEL);
+		break;
 	default:
 		break;
 	}
@@ -636,8 +664,6 @@ static int irq_setup_virq(struct irq_host *host, unsigned int virq,
 		goto error;
 	}
 
-	irq_clear_status_flags(virq, IRQ_NOREQUEST);
-
 	/* map it */
 	smp_wmb();
 	irq_map[virq].hwirq = hwirq;
@@ -648,6 +674,8 @@ static int irq_setup_virq(struct irq_host *host, unsigned int virq,
 		goto errdesc;
 	}
 
+	irq_clear_status_flags(virq, IRQ_NOREQUEST);
+
 	return 0;
 
 errdesc:
@@ -704,8 +732,6 @@ unsigned int irq_create_mapping(struct irq_host *host,
 	 */
 	virq = irq_find_mapping(host, hwirq);
 	if (virq != NO_IRQ) {
-		if (host->ops->remap)
-			host->ops->remap(host, virq, hwirq);
 		pr_debug("irq: -> existing mapping on virq %d\n", virq);
 		return virq;
 	}
@@ -786,14 +812,15 @@ void irq_dispose_mapping(unsigned int virq)
 		return;
 
 	host = irq_map[virq].host;
-	WARN_ON (host == NULL);
-	if (host == NULL)
+	if (WARN_ON(host == NULL))
 		return;
 
 	/* Never unmap legacy interrupts */
 	if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
 		return;
 
+	irq_set_status_flags(virq, IRQ_NOREQUEST);
+
 	/* remove chip and handler */
 	irq_set_chip_and_handler(virq, NULL, NULL);
 
@@ -813,13 +840,6 @@ void irq_dispose_mapping(unsigned int virq)
 			host->revmap_data.linear.revmap[hwirq] = NO_IRQ;
 		break;
 	case IRQ_HOST_MAP_TREE:
-		/*
-		 * Check if radix tree allocated yet, if not then nothing to
-		 * remove.
-		 */
-		smp_rmb();
-		if (revmap_trees_allocated < 1)
-			break;
 		mutex_lock(&revmap_trees_mutex);
 		radix_tree_delete(&host->revmap_data.tree, hwirq);
 		mutex_unlock(&revmap_trees_mutex);
@@ -830,8 +850,6 @@ void irq_dispose_mapping(unsigned int virq)
 	smp_mb();
 	irq_map[virq].hwirq = host->inval_irq;
 
-	irq_set_status_flags(virq, IRQ_NOREQUEST);
-
 	irq_free_descs(virq, 1);
 	/* Free it */
 	irq_free_virt(virq, 1);
@@ -877,16 +895,9 @@ unsigned int irq_radix_revmap_lookup(struct irq_host *host,
 	struct irq_map_entry *ptr;
 	unsigned int virq;
 
-	WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
-
-	/*
-	 * Check if the radix tree exists and has bee initialized.
-	 * If not, we fallback to slow mode
-	 */
-	if (revmap_trees_allocated < 2)
+	if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_TREE))
 		return irq_find_mapping(host, hwirq);
 
-	/* Now try to resolve */
 	/*
 	 * No rcu_read_lock(ing) needed, the ptr returned can't go under us
 	 * as it's referencing an entry in the static irq_map table.
@@ -909,16 +920,7 @@ unsigned int irq_radix_revmap_lookup(struct irq_host *host,
 void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
 			     irq_hw_number_t hwirq)
 {
-
-	WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
-
-	/*
-	 * Check if the radix tree exists yet.
-	 * If not, then the irq will be inserted into the tree when it gets
-	 * initialized.
-	 */
-	smp_rmb();
-	if (revmap_trees_allocated < 1)
+	if (WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE))
 		return;
 
 	if (virq != NO_IRQ) {
@@ -934,7 +936,8 @@ unsigned int irq_linear_revmap(struct irq_host *host,
 {
 	unsigned int *revmap;
 
-	WARN_ON(host->revmap_type != IRQ_HOST_MAP_LINEAR);
+	if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_LINEAR))
+		return irq_find_mapping(host, hwirq);
 
 	/* Check revmap bounds */
 	if (unlikely(hwirq >= host->revmap_data.linear.size))
@@ -1028,53 +1031,6 @@ int arch_early_irq_init(void)
 	return 0;
 }
 
-/* We need to create the radix trees late */
-static int irq_late_init(void)
-{
-	struct irq_host *h;
-	unsigned int i;
-
-	/*
-	 * No mutual exclusion with respect to accessors of the tree is needed
-	 * here as the synchronization is done via the state variable
-	 * revmap_trees_allocated.
-	 */
-	list_for_each_entry(h, &irq_hosts, link) {
-		if (h->revmap_type == IRQ_HOST_MAP_TREE)
-			INIT_RADIX_TREE(&h->revmap_data.tree, GFP_KERNEL);
-	}
-
-	/*
-	 * Make sure the radix trees inits are visible before setting
-	 * the flag
-	 */
-	smp_wmb();
-	revmap_trees_allocated = 1;
-
-	/*
-	 * Insert the reverse mapping for those interrupts already present
-	 * in irq_map[].
-	 */
-	mutex_lock(&revmap_trees_mutex);
-	for (i = 0; i < irq_virq_count; i++) {
-		if (irq_map[i].host &&
-		    (irq_map[i].host->revmap_type == IRQ_HOST_MAP_TREE))
-			radix_tree_insert(&irq_map[i].host->revmap_data.tree,
-					  irq_map[i].hwirq, &irq_map[i]);
-	}
-	mutex_unlock(&revmap_trees_mutex);
-
-	/*
-	 * Make sure the radix trees insertions are visible before setting
-	 * the flag
-	 */
-	smp_wmb();
-	revmap_trees_allocated = 2;
-
-	return 0;
-}
-arch_initcall(irq_late_init);
-
 #ifdef CONFIG_VIRQ_DEBUG
 static int virq_debug_show(struct seq_file *m, void *private)
 {
@@ -1082,10 +1038,11 @@ static int virq_debug_show(struct seq_file *m, void *private)
 	struct irq_desc *desc;
 	const char *p;
 	static const char none[] = "none";
+	void *data;
 	int i;
 
-	seq_printf(m, "%-5s  %-7s  %-15s  %s\n", "virq", "hwirq",
-		      "chip name", "host name");
+	seq_printf(m, "%-5s  %-7s  %-15s  %-18s  %s\n", "virq", "hwirq",
+		      "chip name", "chip data", "host name");
 
 	for (i = 1; i < nr_irqs; i++) {
 		desc = irq_to_desc(i);
@@ -1098,7 +1055,7 @@ static int virq_debug_show(struct seq_file *m, void *private)
 			struct irq_chip *chip;
 
 			seq_printf(m, "%5d  ", i);
-			seq_printf(m, "0x%05lx  ", virq_to_hw(i));
+			seq_printf(m, "0x%05lx  ", irq_map[i].hwirq);
 
 			chip = irq_desc_get_chip(desc);
 			if (chip && chip->name)
@@ -1107,6 +1064,9 @@ static int virq_debug_show(struct seq_file *m, void *private)
 				p = none;
 			seq_printf(m, "%-15s  ", p);
 
+			data = irq_desc_get_chip_data(desc);
+			seq_printf(m, "0x%16p  ", data);
+
 			if (irq_map[i].host && irq_map[i].host->of_node)
 				p = irq_map[i].host->of_node->full_name;
 			else

arch/powerpc/kernel/kgdb.c

@@ -109,7 +109,7 @@ static int kgdb_call_nmi_hook(struct pt_regs *regs)
 #ifdef CONFIG_SMP
 void kgdb_roundup_cpus(unsigned long flags)
 {
-	smp_send_debugger_break(MSG_ALL_BUT_SELF);
+	smp_send_debugger_break();
 }
 #endif
 

arch/powerpc/kernel/lparcfg.c

@@ -132,34 +132,6 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
-/**
- * h_get_mpp
- * H_GET_MPP hcall returns info in 7 parms
- */
-int h_get_mpp(struct hvcall_mpp_data *mpp_data)
-{
-	int rc;
-	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
-
-	rc = plpar_hcall9(H_GET_MPP, retbuf);
-
-	mpp_data->entitled_mem = retbuf[0];
-	mpp_data->mapped_mem = retbuf[1];
-
-	mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
-	mpp_data->pool_num = retbuf[2] & 0xffff;
-
-	mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
-	mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
-	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
-
-	mpp_data->pool_size = retbuf[4];
-	mpp_data->loan_request = retbuf[5];
-	mpp_data->backing_mem = retbuf[6];
-
-	return rc;
-}
-EXPORT_SYMBOL(h_get_mpp);
 
 struct hvcall_ppp_data {
 	u64	entitlement;
@@ -345,6 +317,30 @@ static void parse_mpp_data(struct seq_file *m)
 	seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem);
 }
 
+/**
+ * parse_mpp_x_data
+ * Parse out data returned from h_get_mpp_x
+ */
+static void parse_mpp_x_data(struct seq_file *m)
+{
+	struct hvcall_mpp_x_data mpp_x_data;
+
+	if (!firmware_has_feature(FW_FEATURE_XCMO))
+		return;
+	if (h_get_mpp_x(&mpp_x_data))
+		return;
+
+	seq_printf(m, "coalesced_bytes=%ld\n", mpp_x_data.coalesced_bytes);
+
+	if (mpp_x_data.pool_coalesced_bytes)
+		seq_printf(m, "pool_coalesced_bytes=%ld\n",
+			   mpp_x_data.pool_coalesced_bytes);
+	if (mpp_x_data.pool_purr_cycles)
+		seq_printf(m, "coalesce_pool_purr=%ld\n", mpp_x_data.pool_purr_cycles);
+	if (mpp_x_data.pool_spurr_cycles)
+		seq_printf(m, "coalesce_pool_spurr=%ld\n", mpp_x_data.pool_spurr_cycles);
+}
+
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
 #define SPLPAR_MAXLENGTH 1026*(sizeof(char))
 
@@ -520,6 +516,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 		parse_system_parameter_string(m);
 		parse_ppp_data(m);
 		parse_mpp_data(m);
+		parse_mpp_x_data(m);
 		pseries_cmo_data(m);
 		splpar_dispatch_data(m);
 

arch/powerpc/kernel/misc_32.S

@@ -694,6 +694,17 @@ _GLOBAL(kernel_thread)
 	addi	r1,r1,16
 	blr
 
+#ifdef CONFIG_SMP
+_GLOBAL(start_secondary_resume)
+	/* Reset stack */
+	rlwinm	r1,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
+	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	li	r3,0
+	std	r3,0(r1)		/* Zero the stack frame pointer	*/
+	bl	start_secondary
+	b	.
+#endif /* CONFIG_SMP */
+	
 /*
  * This routine is just here to keep GCC happy - sigh...
  */

arch/powerpc/kernel/misc_64.S

@@ -462,7 +462,8 @@ _GLOBAL(disable_kernel_fp)
  * wait for the flag to change, indicating this kernel is going away but
  * the slave code for the next one is at addresses 0 to 100.
  *
- * This is used by all slaves.
+ * This is used by all slaves, even those that did not find a matching
+ * paca in the secondary startup code.
  *
  * Physical (hardware) cpu id should be in r3.
  */
@@ -471,10 +472,6 @@ _GLOBAL(kexec_wait)
 1:	mflr	r5
 	addi	r5,r5,kexec_flag-1b
 
-	li	r4,KEXEC_STATE_REAL_MODE
-	stb	r4,PACAKEXECSTATE(r13)
-	SYNC
-
 99:	HMT_LOW
 #ifdef CONFIG_KEXEC		/* use no memory without kexec */
 	lwz	r4,0(r5)
@@ -499,11 +496,17 @@ kexec_flag:
  *
  * get phys id from paca
  * switch to real mode
+ * mark the paca as no longer used
  * join other cpus in kexec_wait(phys_id)
  */
 _GLOBAL(kexec_smp_wait)
 	lhz	r3,PACAHWCPUID(r13)
 	bl	real_mode
+
+	li	r4,KEXEC_STATE_REAL_MODE
+	stb	r4,PACAKEXECSTATE(r13)
+	SYNC
+
 	b	.kexec_wait
 
 /*

arch/powerpc/kernel/paca.c

@@ -7,7 +7,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#include <linux/threads.h>
+#include <linux/smp.h>
 #include <linux/module.h>
 #include <linux/memblock.h>
 
@@ -156,18 +156,29 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
 /* Put the paca pointer into r13 and SPRG_PACA */
 void setup_paca(struct paca_struct *new_paca)
 {
+	/* Setup r13 */
 	local_paca = new_paca;
-	mtspr(SPRN_SPRG_PACA, local_paca);
+
 #ifdef CONFIG_PPC_BOOK3E
+	/* On Book3E, initialize the TLB miss exception frames */
 	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
+#else
+	/* In HV mode, we setup both HPACA and PACA to avoid problems
+	 * if we do a GET_PACA() before the feature fixups have been
+	 * applied
+	 */
+	if (cpu_has_feature(CPU_FTR_HVMODE_206))
+		mtspr(SPRN_SPRG_HPACA, local_paca);
 #endif
+	mtspr(SPRN_SPRG_PACA, local_paca);
+
 }
 
 static int __initdata paca_size;
 
 void __init allocate_pacas(void)
 {
-	int nr_cpus, cpu, limit;
+	int cpu, limit;
 
 	/*
 	 * We can't take SLB misses on the paca, and we want to access them
@@ -179,23 +190,18 @@ void __init allocate_pacas(void)
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		limit = min(limit, HvPagesToMap * HVPAGESIZE);
 
-	nr_cpus = NR_CPUS;
-	/* On iSeries we know we can never have more than 64 cpus */
-	if (firmware_has_feature(FW_FEATURE_ISERIES))
-		nr_cpus = min(64, nr_cpus);
-
-	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
+	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids);
 
 	paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
 	memset(paca, 0, paca_size);
 
 	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
-		paca_size, nr_cpus, paca);
+		paca_size, nr_cpu_ids, paca);
 
-	allocate_lppacas(nr_cpus, limit);
+	allocate_lppacas(nr_cpu_ids, limit);
 
 	/* Can't use for_each_*_cpu, as they aren't functional yet */
-	for (cpu = 0; cpu < nr_cpus; cpu++)
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
 		initialise_paca(&paca[cpu], cpu);
 }
 

arch/powerpc/kernel/pci_dn.c

@@ -43,10 +43,9 @@ void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 	const u32 *regs;
 	struct pci_dn *pdn;
 
-	pdn = alloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
+	pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
 	if (pdn == NULL)
 		return NULL;
-	memset(pdn, 0, sizeof(*pdn));
 	dn->data = pdn;
 	pdn->node = dn;
 	pdn->phb = phb;

arch/powerpc/kernel/ppc_ksyms.c

@@ -54,7 +54,6 @@ extern void single_step_exception(struct pt_regs *regs);
 extern int sys_sigreturn(struct pt_regs *regs);
 
 EXPORT_SYMBOL(clear_pages);
-EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);
 EXPORT_SYMBOL(DMA_MODE_WRITE);
@@ -88,9 +87,7 @@ EXPORT_SYMBOL(__copy_tofrom_user);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__strnlen_user);
-#ifdef CONFIG_PPC64
-EXPORT_SYMBOL(copy_4K_page);
-#endif
+EXPORT_SYMBOL(copy_page);
 
 #if defined(CONFIG_PCI) && defined(CONFIG_PPC32)
 EXPORT_SYMBOL(isa_io_base);