Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC Header cleanups from Olof Johansson:
 "This is a collection of header file cleanups, mostly for OMAP and
  AT91, that keeps moving the platforms in the direction of
  multiplatform by removing the need for mach-dependent header files
  used in drivers and other places."

Fix up mostly trivial conflicts as per Olof.

* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
  ARM: OMAP2+: Move iommu/iovmm headers to platform_data
  ARM: OMAP2+: Make some definitions local
  ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
  ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
  ARM: OMAP2+: Move iopgtable header to drivers/iommu/
  ARM: OMAP: Merge iommu2.h into iommu.h
  atmel: move ATMEL_MAX_UART to platform_data/atmel.h
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ...

arch/arm/Kconfig

@@ -945,7 +945,6 @@ config ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
-	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 

arch/arm/configs/afeb9260_defconfig

@@ -1,106 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_AFEB9260=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DEBUG=y
-CONFIG_RTC_DRV_FM3130=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRC_T10DIF=y

arch/arm/configs/cam60_defconfig

@@ -1,173 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_CAM60=y
-CONFIG_ZBOOT_ROM_BSS=0x20004000
-CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_VSXXXAA=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m

arch/arm/configs/cpu9260_defconfig

@@ -1,116 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_CPU9260=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/arm/configs/cpu9g20_defconfig

@@ -1,116 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_CPU9G20=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/arm/configs/qil-a9260_defconfig

@@ -1,114 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_QIL_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_EARLY_USART0=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T94=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set

arch/arm/configs/sam9_l9260_defconfig

@@ -1,148 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_SAM9_L9260=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=25
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1553=y
-CONFIG_RTC_DRV_DS1742=y
-CONFIG_RTC_DRV_M48T86=y
-CONFIG_RTC_DRV_V3020=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/stamp9g20_defconfig

@@ -1,128 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_PORTUXG20=y
-CONFIG_MACH_STAMP9G20=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_GPIO=y
-CONFIG_W1_SLAVE_THERM=y
-CONFIG_W1_SLAVE_DS2431=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_ARM_UNWIND is not set

arch/arm/configs/usb-a9260_defconfig

@@ -1,105 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_USB_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set

arch/arm/mach-at91/at91rm9200.c

@@ -17,11 +17,11 @@
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 #include <mach/at91rm9200.h>
-#include <mach/at91_aic.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_st.h>
 #include <mach/cpu.h>
 
+#include "at91_aic.h"
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91rm9200_devices.c

@@ -18,11 +18,11 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <mach/board.h>
 #include <mach/at91rm9200.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
 
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/at91sam9260.c

@@ -20,10 +20,10 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/at91sam9260.h>
-#include <mach/at91_aic.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
 
+#include "at91_aic.h"
+#include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9260_devices.c

@@ -19,7 +19,6 @@
 
 #include <linux/platform_data/at91_adc.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9260.h>
 #include <mach/at91sam9260_matrix.h>
@@ -27,6 +26,7 @@
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_adc.h>
 
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/at91sam9261.c

@@ -19,10 +19,10 @@
 #include <asm/system_misc.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9261.h>
-#include <mach/at91_aic.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
 
+#include "at91_aic.h"
+#include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9261_devices.c

@@ -21,12 +21,12 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <mach/board.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91sam9261_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/at91sam9263.c

@@ -18,10 +18,10 @@
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 #include <mach/at91sam9263.h>
-#include <mach/at91_aic.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
 
+#include "at91_aic.h"
+#include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9263_devices.c

@@ -20,12 +20,12 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <mach/board.h>
 #include <mach/at91sam9263.h>
 #include <mach/at91sam9263_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/at91sam926x_time.c

@@ -20,8 +20,18 @@
 
 #include <asm/mach/time.h>
 
-#include <mach/at91_pit.h>
-
+#define AT91_PIT_MR		0x00			/* Mode Register */
+#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
+#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
+#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
+
+#define AT91_PIT_SR		0x04			/* Status Register */
+#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
+
+#define AT91_PIT_PIVR		0x08			/* Periodic Interval Value Register */
+#define AT91_PIT_PIIR		0x0c			/* Periodic Interval Image Register */
+#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
+#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
 
 #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
 #define PIT_PICNT(x)	(((x) & AT91_PIT_PICNT) >> 20)

arch/arm/mach-at91/at91sam9_alt_reset.S

@@ -16,7 +16,7 @@
 #include <linux/linkage.h>
 #include <mach/hardware.h>
 #include <mach/at91_ramc.h>
-#include <mach/at91_rstc.h>
+#include "at91_rstc.h"
 
 			.arm
 

arch/arm/mach-at91/at91sam9g45.c

@@ -18,10 +18,10 @@
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 #include <mach/at91sam9g45.h>
-#include <mach/at91_aic.h>
 #include <mach/at91_pmc.h>
 #include <mach/cpu.h>
 
+#include "at91_aic.h"
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -26,7 +26,6 @@
 #include <video/atmel_lcdc.h>
 
 #include <mach/at91_adc.h>
-#include <mach/board.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91_matrix.h>
@@ -36,6 +35,7 @@
 
 #include <media/atmel-isi.h>
 
+#include "board.h"
 #include "generic.h"
 #include "clock.h"
 

arch/arm/mach-at91/at91sam9g45_reset.S

@@ -13,8 +13,7 @@
 #include <linux/linkage.h>
 #include <mach/hardware.h>
 #include <mach/at91_ramc.h>
-#include <mach/at91_rstc.h>
-
+#include "at91_rstc.h"
 			.arm
 
 			.globl	at91sam9g45_restart

arch/arm/mach-at91/at91sam9n12.c

@@ -15,8 +15,8 @@
 #include <mach/at91sam9n12.h>
 #include <mach/at91_pmc.h>
 #include <mach/cpu.h>
-#include <mach/board.h>
 
+#include "board.h"
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9rl.c

@@ -19,10 +19,10 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/at91sam9rl.h>
-#include <mach/at91_aic.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
 
+#include "at91_aic.h"
+#include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -17,13 +17,13 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <mach/board.h>
 #include <mach/at91sam9rl.h>
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 #include <linux/platform_data/dma-atmel.h>
 
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/at91sam9x5.c

@@ -15,8 +15,8 @@
 #include <mach/at91sam9x5.h>
 #include <mach/at91_pmc.h>
 #include <mach/cpu.h>
-#include <mach/board.h>
 
+#include "board.h"
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"

arch/arm/mach-at91/at91x40.c

@@ -18,9 +18,10 @@
 #include <asm/system_misc.h>
 #include <asm/mach/arch.h>
 #include <mach/at91x40.h>
-#include <mach/at91_aic.h>
 #include <mach/at91_st.h>
 #include <mach/timex.h>
+
+#include "at91_aic.h"
 #include "generic.h"
 
 /*

arch/arm/mach-at91/at91x40_time.c

@@ -26,7 +26,8 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach/time.h>
-#include <mach/at91_tc.h>
+
+#include "at91_tc.h"
 
 #define at91_tc_read(field) \
 	__raw_readl(AT91_IO_P2V(AT91_TC) + field)

arch/arm/mach-at91/board-1arm.c

@@ -34,10 +34,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
-#include <mach/at91_aic.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -43,9 +43,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
-
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-cam60.c

@@ -38,10 +38,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-carmeva.c

@@ -35,9 +35,9 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-cpu9krea.c

@@ -40,12 +40,12 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91sam9260_matrix.h>
 #include <mach/at91_matrix.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-cpuat91.c

@@ -36,12 +36,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
 #include <mach/cpu.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 static struct gpio_led cpuat91_leds[] = {

arch/arm/mach-at91/board-csb337.c

@@ -38,9 +38,9 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-csb637.c

@@ -35,9 +35,9 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-dt.c

@@ -15,15 +15,14 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
-
 #include <asm/setup.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-eb01.c

@@ -27,8 +27,9 @@
 #include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
+
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 static void __init at91eb01_init_irq(void)

arch/arm/mach-at91/board-eb9200.c

@@ -35,9 +35,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
-
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-ecbat91.c

@@ -37,10 +37,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
-#include <mach/at91_aic.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-eco920.c

@@ -24,12 +24,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
 #include <mach/cpu.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 static void __init eco920_init_early(void)

arch/arm/mach-at91/board-flexibity.c

@@ -33,9 +33,9 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 static void __init flexibity_init_early(void)

arch/arm/mach-at91/board-foxg20.c

@@ -41,10 +41,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-gsia18s.c

@@ -30,14 +30,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/gsia18s.h>
-#include <mach/stamp9g20.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gsia18s.h"
+#include "stamp9g20.h"
 
 static void __init gsia18s_init_early(void)
 {

arch/arm/mach-at91/board-kafa.c

@@ -34,10 +34,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/cpu.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-kb9202.c

@@ -35,12 +35,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
-#include <mach/at91_aic.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-neocore926.c

@@ -44,10 +44,10 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-pcontrol-g20.c

@@ -29,13 +29,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/stamp9g20.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "stamp9g20.h"
 
 
 static void __init pcontrol_g20_init_early(void)

arch/arm/mach-at91/board-picotux200.c

@@ -37,11 +37,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-qil-a9260.c

@@ -40,11 +40,11 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
 
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-rm9200dk.c

@@ -39,11 +39,11 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-rm9200ek.c

@@ -39,11 +39,11 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/board-rsi-ews.c

@@ -25,11 +25,11 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 
 #include <linux/gpio.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 static void __init rsi_ews_init_early(void)

arch/arm/mach-at91/board-sam9-l9260.c

@@ -37,10 +37,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9260ek.c

@@ -41,12 +41,12 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
 #include <mach/system_rev.h>
 
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9261ek.c

@@ -45,12 +45,12 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
 #include <mach/system_rev.h>
 
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9263ek.c

@@ -44,12 +44,12 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
 #include <mach/system_rev.h>
 
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9g20ek.c

@@ -43,11 +43,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/system_rev.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -42,12 +42,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
 #include <mach/system_rev.h>
 
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-sam9rlek.c

@@ -30,11 +30,12 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
 
+
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-snapper9260.c

@@ -32,10 +32,10 @@
 #include <asm/mach/arch.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-stamp9g20.c

@@ -25,10 +25,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-usb-a926x.c

@@ -41,11 +41,11 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
 
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 

arch/arm/mach-at91/board-yl-9200.c

@@ -43,12 +43,12 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
 #include <mach/cpu.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
 
 

arch/arm/mach-at91/include/mach/board.h → arch/arm/mach-at91/board.h

@@ -31,42 +31,15 @@
 #ifndef __ASM_ARCH_BOARD_H
 #define __ASM_ARCH_BOARD_H
 
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-#include <linux/atmel-mci.h>
-#include <sound/atmel-ac97c.h>
-#include <linux/serial.h>
-#include <linux/platform_data/macb.h>
 #include <linux/platform_data/atmel.h>
 
  /* USB Device */
-struct at91_udc_data {
-	int	vbus_pin;		/* high == host powering us */
-	u8	vbus_active_low;	/* vbus polarity */
-	u8	vbus_polled;		/* Use polling, not interrupt */
-	int	pullup_pin;		/* active == D+ pulled up */
-	u8	pullup_active_low;	/* true == pullup_pin is active low */
-};
 extern void __init at91_add_device_udc(struct at91_udc_data *data);
 
  /* USB High Speed Device */
 extern void __init at91_add_device_usba(struct usba_platform_data *data);
 
  /* Compact Flash */
-struct at91_cf_data {
-	int	irq_pin;		/* I/O IRQ */
-	int	det_pin;		/* Card detect */
-	int	vcc_pin;		/* power switching */
-	int	rst_pin;		/* card reset */
-	u8	chipselect;		/* EBI Chip Select number */
-	u8	flags;
-#define AT91_CF_TRUE_IDE	0x01
-#define AT91_IDE_SWAP_A0_A2	0x02
-};
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
  /* MMC / SD */
@@ -76,16 +49,6 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d
 extern void __init at91_add_device_eth(struct macb_platform_data *data);
 
  /* USB Host */
-#define AT91_MAX_USBH_PORTS	3
-struct at91_usbh_data {
-	int		vbus_pin[AT91_MAX_USBH_PORTS];	/* port power-control pin */
-	int             overcurrent_pin[AT91_MAX_USBH_PORTS];
-	u8		ports;				/* number of ports on root hub */
-	u8              overcurrent_supported;
-	u8              vbus_pin_active_low[AT91_MAX_USBH_PORTS];
-	u8              overcurrent_status[AT91_MAX_USBH_PORTS];
-	u8              overcurrent_changed[AT91_MAX_USBH_PORTS];
-};
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
@@ -114,13 +77,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin
 
 extern struct platform_device *atmel_default_console_device;
 
-struct atmel_uart_data {
-	int			num;		/* port num */
-	short			use_dma_tx;	/* use transmit DMA? */
-	short			use_dma_rx;	/* use receive DMA? */
-	void __iomem		*regs;		/* virt. base address, if any */
-	struct serial_rs485	rs485;		/* rs485 settings */
-};
 extern void __init at91_add_device_serial(void);
 
 /*
@@ -163,24 +119,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data,
 		bool use_pck_as_mck);
 
  /* Touchscreen Controller */
-struct at91_tsadcc_data {
-	unsigned int    adc_clock;
-	u8		pendet_debounce;
-	u8		ts_sample_hold_time;
-};
 extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
 
 /* CAN */
-struct at91_can_data {
-	void (*transceiver_switch)(int on);
-};
 extern void __init at91_add_device_can(struct at91_can_data *data);
 
  /* LEDs */
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
 extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
 #endif

arch/arm/mach-at91/include/mach/at91_pit.h

@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_pit.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIT_H
-#define AT91_PIT_H
-
-#define AT91_PIT_MR		0x00			/* Mode Register */
-#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
-#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
-#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
-
-#define AT91_PIT_SR		0x04			/* Status Register */
-#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
-
-#define AT91_PIT_PIVR		0x08			/* Periodic Interval Value Register */
-#define AT91_PIT_PIIR		0x0c			/* Periodic Interval Image Register */
-#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
-#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
-
-#endif

arch/arm/mach-at91/include/mach/hardware.h

@@ -90,9 +90,6 @@
 #define AT91_SRAM_MAX		SZ_1M
 #define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
 
-/* Serial ports */
-#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
-
 /* External Memory Map */
 #define AT91_CHIPSELECT_0	0x10000000
 #define AT91_CHIPSELECT_1	0x20000000

arch/arm/mach-at91/irq.c

@@ -42,7 +42,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <mach/at91_aic.h>
+#include "at91_aic.h"
 
 void __iomem *at91_aic_base;
 static struct irq_domain *at91_aic_domain;

arch/arm/mach-at91/leds.c

@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <mach/board.h>
+#include "board.h"
 
 
 /* ------------------------------------------------------------------------- */

arch/arm/mach-at91/pm.c

@@ -25,10 +25,10 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/at91_aic.h>
 #include <mach/at91_pmc.h>
 #include <mach/cpu.h>
 
+#include "at91_aic.h"
 #include "generic.h"
 #include "pm.h"
 
@@ -36,8 +36,8 @@
  * Show the reason for the previous system reset.
  */
 
-#include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
+#include "at91_rstc.h"
+#include "at91_shdwc.h"
 
 static void __init show_reset_status(void)
 {

arch/arm/mach-at91/setup.c

@@ -19,8 +19,8 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_shdwc.h>
 
+#include "at91_shdwc.h"
 #include "soc.h"
 #include "generic.h"
 

arch/arm/mach-omap1/Makefile

@@ -3,7 +3,8 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
+obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
+	 serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)

arch/arm/mach-omap1/board-ams-delta.c

@@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.atag_offset	= 0x100,
 	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= ams_delta_init,
 	.init_late	= ams_delta_init_late,

arch/arm/mach-omap1/board-fsample.c

@@ -27,16 +27,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
 
 #include "iomap.h"
 #include "common.h"
+#include "fpga.h"
 
 /* fsample is pretty close to p2-sample */
 
@@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = {
 
 static void __init fsample_init_smc91x(void)
 {
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
 		   H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
 }
@@ -362,7 +362,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.atag_offset	= 0x100,
 	.map_io		= omap_fsample_map_io,
 	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_fsample_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-generic.c

@@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-h2-mmc.c

@@ -13,12 +13,11 @@
  */
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
-
+#include <linux/platform_data/gpio-omap.h>
 #include <linux/i2c/tps65010.h>
 
-#include <plat/mmc.h>
-
 #include "board-h2.h"
+#include "mmc.h"
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 

arch/arm/mach-omap1/board-h2.c

@@ -39,8 +39,8 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <mach/flash.h>
@@ -50,6 +50,7 @@
 
 #include "common.h"
 #include "board-h2.h"
+#include "dma.h"
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START		0x04000300
@@ -458,7 +459,6 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h2_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-h3-mmc.c

@@ -16,9 +16,8 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <plat/mmc.h>
-
 #include "board-h3.h"
+#include "mmc.h"
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 

arch/arm/mach-omap1/board-h3.c

@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/flash.h>
 
 #include <mach/hardware.h>
@@ -452,7 +452,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h3_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-htcherald.c

@@ -43,7 +43,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/omap7xx.h>
-#include <plat/mmc.h>
+#include "mmc.h"
 
 #include <mach/irqs.h>
 #include <mach/usb.h>
@@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald")
 	.atag_offset    = 0x100,
 	.map_io         = htcherald_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq       = omap1_init_irq,
 	.init_machine   = htcherald_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-innovator.c

@@ -33,16 +33,15 @@
 
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/mmc.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
 
 #include "iomap.h"
 #include "common.h"
+#include "mmc.h"
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300
@@ -215,7 +214,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
 
 static int innovator_get_pendown_state(void)
 {
-	return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+	return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
 }
 
 static const struct ads7846_platform_data innovator1510_ts_info = {
@@ -279,7 +278,7 @@ static struct platform_device *innovator1610_devices[] __initdata = {
 static void __init innovator_init_smc91x(void)
 {
 	if (cpu_is_omap1510()) {
-		fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
 			   OMAP1510_FPGA_RST);
 		udelay(750);
 	} else {
@@ -335,10 +334,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
 	if (power_on)
-		fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
 				OMAP1510_FPGA_POWER);
 	else
-		fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
 				OMAP1510_FPGA_POWER);
 
 	return 0;
@@ -390,14 +389,14 @@ static void __init innovator_init(void)
 		omap_cfg_reg(UART3_TX);
 		omap_cfg_reg(UART3_RX);
 
-		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
 		reg |= OMAP1510_FPGA_PCR_COM1_EN;
-		fpga_write(reg, OMAP1510_FPGA_POWER);
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
 		udelay(10);
 
-		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
 		reg |= OMAP1510_FPGA_PCR_COM2_EN;
-		fpga_write(reg, OMAP1510_FPGA_POWER);
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
 		udelay(10);
 
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
@@ -437,6 +436,7 @@ static void __init innovator_init(void)
  */
 static void __init innovator_map_io(void)
 {
+#ifdef CONFIG_ARCH_OMAP15XX
 	omap15xx_map_io();
 
 	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
@@ -444,9 +444,10 @@ static void __init innovator_map_io(void)
 
 	/* Dump the Innovator FPGA rev early - useful info for support. */
 	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
-			fpga_read(OMAP1510_FPGA_REV_HIGH),
-			fpga_read(OMAP1510_FPGA_REV_LOW),
-			fpga_read(OMAP1510_FPGA_BOARD_REV));
+			__raw_readb(OMAP1510_FPGA_REV_HIGH),
+			__raw_readb(OMAP1510_FPGA_REV_LOW),
+			__raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
@@ -454,7 +455,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.atag_offset	= 0x100,
 	.map_io		= innovator_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= innovator_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-nokia770.c

@@ -29,13 +29,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <plat/mmc.h>
-#include <plat/clock.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
 
 #include "common.h"
+#include "clock.h"
+#include "mmc.h"
 
 #define ADS7846_PENDOWN_GPIO	15
 
@@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-osk.c

@@ -48,7 +48,7 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= osk_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-palmte.c

@@ -36,8 +36,8 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
+#include <mach/tc.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 
@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1
@@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmte_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-palmtt.c

@@ -28,16 +28,16 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/leds-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/led.h>
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 
@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 #define PALMTT_USBDETECT_GPIO	0
 #define PALMTT_CABLE_GPIO	1
@@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-palmz71.c

@@ -38,8 +38,8 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 
@@ -47,6 +47,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 #define PALMZ71_USBDETECT_GPIO	0
 #define PALMZ71_PENIRQ_GPIO	6
@@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmz71_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-perseus2.c

@@ -28,15 +28,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
-#include <plat/fpga.h>
 #include <mach/flash.h>
 
 #include <mach/hardware.h>
 
 #include "iomap.h"
 #include "common.h"
+#include "fpga.h"
 
 static const unsigned int p2_keymap[] = {
 	KEY(0, 0, KEY_UP),
@@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
 
 static void __init perseus2_init_smc91x(void)
 {
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
 		   H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
 }
@@ -324,7 +324,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.atag_offset	= 0x100,
 	.map_io		= omap_perseus2_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-sx1-mmc.c

@@ -16,9 +16,10 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <plat/mmc.h>
 #include <mach/board-sx1.h>
 
+#include "mmc.h"
+
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,

arch/arm/mach-omap1/board-sx1.c

@@ -36,15 +36,16 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/board-sx1.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/board-voiceblue.c

@@ -34,7 +34,7 @@
 #include <mach/board-voiceblue.h>
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= voiceblue_init,
 	.init_late	= omap1_init_late,

arch/arm/mach-omap1/clock.c

@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -21,21 +22,21 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/cpu.h>
-#include <plat/usb.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/clkdev_omap.h>
-
 #include <mach/hardware.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "opp.h"
+#include "sram.h"
 
 __u32 arm_idlect1_mask;
 struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
 /*
  * Omap1 specific clock functions
  */
@@ -607,3 +608,497 @@ void omap1_clk_disable_unused(struct clk *clk)
 }
 
 #endif
+
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	int ret;
+
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = omap1_clk_enable(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->usecount == 0) {
+		pr_err("Trying disable clock %s with 0 usecount\n",
+		       clk->name);
+		WARN_ON(1);
+		goto out;
+	}
+
+	omap1_clk_disable(clk);
+
+out:
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long flags;
+	unsigned long ret;
+
+	if (clk == NULL || IS_ERR(clk))
+		return 0;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = clk->rate;
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	long ret;
+
+	if (clk == NULL || IS_ERR(clk))
+		return 0;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = omap1_clk_round_rate(clk, rate);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (clk == NULL || IS_ERR(clk))
+		return ret;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = omap1_clk_set_rate(clk, rate);
+	if (ret == 0)
+		propagate_rate(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+	get_option(&str, &mpurate);
+
+	if (!mpurate)
+		return 1;
+
+	if (mpurate < 1000)
+		mpurate *= 1000000;
+
+	return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+	return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+	WARN_ON(!clk->fixed_div);
+
+	return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+	list_del_init(&child->sibling);
+	if (parent)
+		list_add(&child->sibling, &parent->children);
+	child->parent = parent;
+
+	/* now do the debugfs renaming to reattach the child
+	   to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &tclk->children, sibling) {
+		if (clkp->recalc)
+			clkp->rate = clkp->recalc(clkp);
+		propagate_rate(clkp);
+	}
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &root_clks, sibling) {
+		if (clkp->recalc)
+			clkp->rate = clkp->recalc(clkp);
+		propagate_rate(clkp);
+	}
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run.  No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+	INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	/*
+	 * trap out already registered clocks
+	 */
+	if (clk->node.next || clk->node.prev)
+		return 0;
+
+	mutex_lock(&clocks_mutex);
+	if (clk->parent)
+		list_add(&clk->sibling, &clk->parent->children);
+	else
+		list_add(&clk->sibling, &root_clks);
+
+	list_add(&clk->node, &clocks);
+	if (clk->init)
+		clk->init(clk);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	mutex_lock(&clocks_mutex);
+	list_del(&clk->sibling);
+	list_del(&clk->node);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clocks, node)
+		if (clkp->flags & ENABLE_ON_INIT)
+			clk_enable(clkp);
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name.  Assumes that struct clk
+ * names are unique.  Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+	struct clk *c;
+	struct clk *ret = NULL;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(c, &clocks, node) {
+		if (!strcmp(c->name, name)) {
+			ret = c;
+			break;
+		}
+	}
+
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+	struct clk *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+
+	list_for_each_entry(c, &clocks, node)
+		if (c->ops->allow_idle)
+			c->ops->allow_idle(c);
+
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+	struct clk *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+
+	list_for_each_entry(c, &clocks, node)
+		if (c->ops->deny_idle)
+			c->ops->deny_idle(c);
+
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+	return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+	.enable		= clkll_enable_null,
+	.disable	= clkll_disable_null,
+};
+
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+	.name	= "dummy",
+	.ops	= &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+	struct clk *ck;
+	unsigned long flags;
+
+	pr_info("clock: disabling unused clocks to save power\n");
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	list_for_each_entry(ck, &clocks, node) {
+		if (ck->ops == &clkops_null)
+			continue;
+
+		if (ck->usecount > 0 || !ck->enable_reg)
+			continue;
+
+		omap1_clk_disable_unused(ck);
+	}
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ *	debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+	struct clk *c;
+	struct clk *pa;
+
+	mutex_lock(&clocks_mutex);
+	seq_printf(s, "%-30s %-30s %-10s %s\n",
+		   "clock-name", "parent-name", "rate", "use-count");
+
+	list_for_each_entry(c, &clocks, node) {
+		pa = c->parent;
+		seq_printf(s, "%-30s %-30s %-10lu %d\n",
+			   c->name, pa ? pa->name : "none", c->rate,
+			   c->usecount);
+	}
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+	.open           = clk_dbg_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+	int err;
+	struct dentry *d;
+	struct clk *pa = c->parent;
+
+	d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+	if (!d)
+		return -ENOMEM;
+	c->dent = d;
+
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(c->dent);
+	return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent;
+
+	if (pa && !pa->dent) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (!c->dent) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (!d)
+		return -ENOMEM;
+	clk_debugfs_root = d;
+
+	list_for_each_entry(c, &clocks, node) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
+
+	d = debugfs_create_file("summary", S_IRUGO,
+		d, NULL, &debug_clock_fops);
+	if (!d)
+		return -ENOMEM;
+
+	return 0;
+err_out:
+	debugfs_remove_recursive(clk_debugfs_root);
+	return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */

arch/arm/mach-omap1/clock.h

@@ -14,8 +14,184 @@
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
 #include <linux/clk.h>
+#include <linux/list.h>
 
-#include <plat/clock.h>
+#include <linux/clkdev.h>
+
+struct module;
+struct clk;
+
+struct omap_clk {
+	u16				cpu;
+	struct clk_lookup		lk;
+};
+
+#define CLK(dev, con, ck, cp)		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310		(1 << 0)
+#define CK_7XX		(1 << 1)	/* 7xx, 850 */
+#define CK_1510		(1 << 2)
+#define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */
+#define CK_1710		(1 << 4)	/* 1710 extra for rate selection */
+
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk)	(clk->name)
+#define __clk_get_parent(clk)	(clk->parent)
+#define __clk_get_rate(clk)	(clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+	void			(*find_idlest)(struct clk *, void __iomem **,
+					       u8 *, u8 *);
+	void			(*find_companion)(struct clk *, void __iomem **,
+						  u8 *);
+	void			(*allow_idle)(struct clk *);
+	void			(*deny_idle)(struct clk *);
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2		(1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+	struct list_head	node;
+	const struct clkops	*ops;
+	const char		*name;
+	struct clk		*parent;
+	struct list_head	children;
+	struct list_head	sibling;	/* node for children */
+	unsigned long		rate;
+	void __iomem		*enable_reg;
+	unsigned long		(*recalc)(struct clk *);
+	int			(*set_rate)(struct clk *, unsigned long);
+	long			(*round_rate)(struct clk *, unsigned long);
+	void			(*init)(struct clk *);
+	u8			enable_bit;
+	s8			usecount;
+	u8			fixed_div;
+	u8			flags;
+	u8			rate_offset;
+	u8			src_offset;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;	/* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+	int		(*clk_enable)(struct clk *clk);
+	void		(*clk_disable)(struct clk *clk);
+	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
+	void		(*clk_allow_idle)(struct clk *clk);
+	void		(*clk_deny_idle)(struct clk *clk);
+	void		(*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
 
 int omap1_clk_init(void);
 void omap1_clk_late_init(void);

arch/arm/mach-omap1/clock_data.c

@@ -22,16 +22,14 @@
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/clkdev_omap.h>
-#include <plat/sram.h>	/* for omap_sram_reprogram_clock() */
+#include "soc.h"
 
 #include <mach/hardware.h>
 #include <mach/usb.h>   /* for OTG_BASE */
 
 #include "iomap.h"
 #include "clock.h"
+#include "sram.h"
 
 /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
 #define IDL_CLKOUT_ARM_SHIFT			12
@@ -765,14 +763,6 @@ static struct omap_clk omap_clks[] = {
  * init
  */
 
-static struct clk_functions omap1_clk_functions = {
-	.clk_enable		= omap1_clk_enable,
-	.clk_disable		= omap1_clk_disable,
-	.clk_round_rate		= omap1_clk_round_rate,
-	.clk_set_rate		= omap1_clk_set_rate,
-	.clk_disable_unused	= omap1_clk_disable_unused,
-};
-
 static void __init omap1_show_rates(void)
 {
 	pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
@@ -803,8 +793,6 @@ int __init omap1_clk_init(void)
 	if (!cpu_is_omap15xx())
 		omap_writew(0, SOFT_REQ_REG2);
 
-	clk_init(&omap1_clk_functions);
-
 	/* By default all idlect1 clocks are allowed to idle */
 	arm_idlect1_mask = ~0;
 

arch/arm/mach-omap1/common.h

@@ -26,8 +26,10 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
 #define __ARCH_ARM_MACH_OMAP1_COMMON_H
 
-#include <plat/common.h>
 #include <linux/mtd/mtd.h>
+#include <linux/i2c-omap.h>
+
+#include <plat/i2c.h>
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
@@ -38,6 +40,7 @@ static inline void omap7xx_map_io(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
 void omap15xx_map_io(void);
 #else
 static inline void omap15xx_map_io(void)
@@ -90,4 +93,6 @@ extern int ocpi_enable(void);
 static inline int ocpi_enable(void) { return 0; }
 #endif
 
+extern int omap1_get_reset_sources(void);
+
 #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */