e100: update e100.txt

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

Documentation/networking/e100.txt

@@ -1,16 +1,17 @@
 Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
 ==============================================================
 
-November 17, 2004
-
+November 15, 2005
 
 Contents
 ========
 
 - In This Release
 - Identifying Your Adapter
+- Building and Installation
 - Driver Configuration Parameters
 - Additional Configurations
+- Known Issues
 - Support
 
 
@@ -18,18 +19,30 @@ In This Release
 ===============
 
 This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
-Adapters, version 3.3.x.  This driver supports 2.4.x and 2.6.x kernels. 
+Adapters. This driver includes support for Itanium(R)2-based systems.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel PRO/100 adapter.
+
+The following features are now available in supported kernels:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
 
 Identifying Your Adapter
 ========================
 
-For more information on how to identify your adapter, go to the Adapter & 
+For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
   http://support.intel.com/support/network/adapter/pro100/21397.htm
 
-For the latest Intel network drivers for Linux, refer to the following 
-website. In the search field, enter your adapter name or type, or use the 
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
 networking link on the left to search for your adapter:
 
   http://downloadfinder.intel.com/scripts-df/support_intel.asp
@@ -40,73 +53,75 @@ Driver Configuration Parameters
 The default value for each parameter is generally the recommended setting,
 unless otherwise noted.
 
-Rx Descriptors: Number of receive descriptors. A receive descriptor is a data 
-   structure that describes a receive buffer and its attributes to the network 
-   controller. The data in the descriptor is used by the controller to write 
-   data from the controller to host memory. In the 3.0.x driver the valid
-   range for this parameter is 64-256. The default value is 64. This parameter 
-   can be changed using the command 
- 
+Rx Descriptors: Number of receive descriptors. A receive descriptor is a data
+   structure that describes a receive buffer and its attributes to the network
+   controller. The data in the descriptor is used by the controller to write
+   data from the controller to host memory. In the 3.x.x driver the valid range
+   for this parameter is 64-256. The default value is 64. This parameter can be
+   changed using the command:
+
    ethtool -G eth? rx n, where n is the number of desired rx descriptors.
 
-Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a
-   data structure that describes a transmit buffer and its attributes to the
-   network controller. The data in the descriptor is used by the controller to 
-   read data from the host memory to the controller. In the 3.0.x driver the 
-   valid range for this parameter is 64-256. The default value is 64. This 
-   parameter can be changed using the command 
+Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data
+   structure that describes a transmit buffer and its attributes to the network
+   controller. The data in the descriptor is used by the controller to read
+   data from the host memory to the controller. In the 3.x.x driver the valid
+   range for this parameter is 64-256. The default value is 64. This parameter
+   can be changed using the command:
 
    ethtool -G eth? tx n, where n is the number of desired tx descriptors.
 
-Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by 
-   default. Ethtool can be used as follows to force speed/duplex. 
+Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
+   default. Ethtool can be used as follows to force speed/duplex.
 
    ethtool -s eth?  autoneg off speed {10|100} duplex {full|half}
 
    NOTE: setting the speed/duplex to incorrect values will cause the link to
    fail.
 
-Event Log Message Level:  The driver uses the message level flag to log events 
-   to syslog. The message level can be set at driver load time. It can also be 
-   set using the command
+Event Log Message Level:  The driver uses the message level flag to log events
+   to syslog. The message level can be set at driver load time. It can also be
+   set using the command:
 
    ethtool -s eth? msglvl n
 
+
 Additional Configurations
 =========================
 
   Configuring the Driver on Different Distributions
   -------------------------------------------------
 
-  Configuring a network driver to load properly when the system is started is 
-  distribution dependent. Typically, the configuration process involves adding 
-  an alias line to /etc/modules.conf as well as editing other system startup 
-  scripts and/or configuration files.  Many popular Linux distributions ship 
-  with tools to make these changes for you. To learn the proper way to 
-  configure a network device for your system, refer to your distribution 
-  documentation. If during this process you are asked for the driver or module 
-  name, the name for the Linux Base Driver for the Intel PRO/100 Family of 
-  Adapters is e100.
+  Configuring a network driver to load properly when the system is started is
+  distribution dependent. Typically, the configuration process involves adding
+  an alias line to /etc/modules.conf or /etc/modprobe.conf as well as editing
+  other system startup scripts and/or configuration files.  Many popular Linux
+  distributions ship with tools to make these changes for you. To learn the
+  proper way to configure a network device for your system, refer to your
+  distribution documentation.  If during this process you are asked for the
+  driver or module name, the name for the Linux Base Driver for the Intel
+  PRO/100 Family of Adapters is e100.
 
-  As an example, if you install the e100 driver for two PRO/100 adapters 
-  (eth0 and eth1), add the following to modules.conf:
+  As an example, if you install the e100 driver for two PRO/100 adapters
+  (eth0 and eth1), add the following to modules.conf or modprobe.conf:
 
        alias eth0 e100
        alias eth1 e100
 
   Viewing Link Messages
   ---------------------
-  In order to see link messages and other Intel driver information on your 
-  console, you must set the dmesg level up to six. This can be done by 
-  entering the following on the command line before loading the e100 driver: 
+  In order to see link messages and other Intel driver information on your
+  console, you must set the dmesg level up to six. This can be done by
+  entering the following on the command line before loading the e100 driver:
 
        dmesg -n 8
 
-  If you wish to see all messages issued by the driver, including debug 
+  If you wish to see all messages issued by the driver, including debug
   messages, set the dmesg level to eight.
 
   NOTE: This setting is not saved across reboots.
 
+
   Ethtool
   -------
 
@@ -114,29 +129,27 @@ Additional Configurations
   diagnostics, as well as displaying statistical information.  Ethtool
   version 1.6 or later is required for this functionality.
 
-  The latest release of ethtool can be found at:
-  http://sf.net/projects/gkernel.  
+  The latest release of ethtool can be found from
+  http://sourceforge.net/projects/gkernel.
 
-  NOTE: This driver uses mii support from the kernel. As a result, when 
-  there is no link, ethtool will report speed/duplex to be 10/half.
+  NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
+  for a more complete ethtool feature set can be enabled by upgrading
+  ethtool to ethtool-1.8.1.
 
-  NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support 
-  for a more complete ethtool feature set can be enabled by upgrading 
-  ethtool to ethtool-1.8.1. 
 
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is provided through the Ethtool* utility. Ethtool is included with Red 
-  Hat* 8.0. For other Linux distributions, download and install Ethtool from 
-  the following website: http://sourceforge.net/projects/gkernel. 
+  WoL is provided through the Ethtool* utility. Ethtool is included with Red
+  Hat* 8.0. For other Linux distributions, download and install Ethtool from
+  the following website: http://sourceforge.net/projects/gkernel.
 
-  For instructions on enabling WoL with Ethtool, refer to the Ethtool man
-  page.
+  For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
 
   WoL will be enabled on the system during the next shut down or reboot. For
-  this driver version, in order to enable WoL, the e100 driver must be 
+  this driver version, in order to enable WoL, the e100 driver must be
   loaded when shutting down or rebooting the system.
 
+
   NAPI
   ----
 
@@ -144,6 +157,25 @@ Additional Configurations
 
   See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
 
+  Multiple Interfaces on Same Ethernet Broadcast Network
+  ------------------------------------------------------
+
+  Due to the default ARP behavior on Linux, it is not possible to have
+  one system on two IP networks in the same Ethernet broadcast domain
+  (non-partitioned switch) behave as expected. All Ethernet interfaces
+  will respond to IP traffic for any IP address assigned to the system.
+  This results in unbalanced receive traffic.
+
+  If you have multiple interfaces in a server, either turn on ARP
+  filtering by
+
+  (1) entering: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+      (this only works if your kernel's version is higher than 2.4.5), or
+
+  (2) installing the interfaces in separate broadcast domains (either
+      in different switches or in a switch partitioned to VLANs).
+
+
 Support
 =======
 
@@ -151,20 +183,24 @@ For general information, go to the Intel support website at:
 
     http://support.intel.com
 
+    or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
 If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related to 
-the issue to linux.nics@intel.com.
+kernel with a supported adapter, email the specific information related to the
+issue to e1000-devel@lists.sourceforge.net.
 
 
 License
 =======
 
-This software program is released under the terms of a license agreement 
-between you ('Licensee') and Intel. Do not use or load this software or any 
-associated materials (collectively, the 'Software') until you have carefully 
-read the full terms and conditions of the LICENSE located in this software 
-package. By loading or using the Software, you agree to the terms of this 
-Agreement. If you do not agree with the terms of this Agreement, do not 
-install or use the Software.
+This software program is released under the terms of a license agreement
+between you ('Licensee') and Intel. Do not use or load this software or any
+associated materials (collectively, the 'Software') until you have carefully
+read the full terms and conditions of the file COPYING located in this software
+package. By loading or using the Software, you agree to the terms of this
+Agreement. If you do not agree with the terms of this Agreement, do not install
+or use the Software.
 
 * Other names and brands may be claimed as the property of others.