Browse Source

USB: Allow initialization of broken keyspan serial adapters.

Fixes the keyspan driver after the addition of additional
checking of driver requirements introduced in usb-serial.c
commit 063a2da8f01806906f7d7b1a1424b9afddebc443.  The initialization
of the keyspan usb_serial_driver structs were not initializing the
num_interrupt_out field and the additional checking was rejecting
the end point so the driver wouldn't finish initializing.

This commit initializes the fields to NUM_DONT_CARE.
It works for the keyspan USA-49WG and doesn't break the USA-19HS
which are the two keyspan devices I have to test with.

Signed-off-by: Clark Rawlins <clark.rawlins@escient.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clark Rawlins 17 years ago
parent
commit
822470537d
1 changed files with 4 additions and 0 deletions
  1. 4 0
      drivers/usb/serial/keyspan.h

+ 4 - 0
drivers/usb/serial/keyspan.h

@@ -637,6 +637,7 @@ static struct usb_serial_driver keyspan_pre_device = {
 	.description		= "Keyspan - (without firmware)",
 	.id_table		= keyspan_pre_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 1,
@@ -651,6 +652,7 @@ static struct usb_serial_driver keyspan_1port_device = {
 	.description		= "Keyspan 1 port adapter",
 	.id_table		= keyspan_1port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 1,
@@ -678,6 +680,7 @@ static struct usb_serial_driver keyspan_2port_device = {
 	.description		= "Keyspan 2 port adapter",
 	.id_table		= keyspan_2port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 2,
@@ -705,6 +708,7 @@ static struct usb_serial_driver keyspan_4port_device = {
 	.description		= "Keyspan 4 port adapter",
 	.id_table		= keyspan_4port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 4,