Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (132 commits)
  sh: oprofile: Fix up the module build.
  sh: add UIO support for JPU on SH7722.
  serial: sh-sci: Fix up port pinmux for SH7366.
  sh: mach-rsk: Use uImage generation by default for rsk7201/7203.
  sh: mach-sh03: Fix up pata_platform build breakage.
  sh: enable deferred io LCDC on Migo-R
  video: sh_mobile_lcdcfb deferred io support
  video: deferred io with physically contiguous memory
  video: deferred io cleanup
  video: fix deferred io fsync()
  sh: add LCDC interrupt configuration to AP325 and Migo-R
  sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFB
  sh: split coherent pages
  sh: dma: Kill off ISA DMA wrapper.
  sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.
  sh: Kill off the unused SH_ALPHANUMERIC debug option.
  sh: Enable skipping of bss on debug platforms for sh32 also.
  doc: Update sh cpufreq documentation.
  sh: mrshpc_setup_windows() needs to be inline.
  serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.
  ...

Documentation/cpu-freq/user-guide.txt

@@ -93,10 +93,8 @@ Several "PowerBook" and "iBook2" notebooks are supported.
 1.5 SuperH
 ----------
 
-The following SuperH processors are supported by cpufreq:
-
-SH-3
-SH-4
+All SuperH processors supporting rate rounding through the clock
+framework are supported by cpufreq.
 
 1.6 Blackfin
 ------------

Documentation/sh/kgdb.txt

@@ -1,179 +0,0 @@
-
-This file describes the configuration and behavior of KGDB for the SH
-kernel. Based on a description from Henry Bell <henry.bell@st.com>, it
-has been modified to account for quirks in the current implementation.
-
-Version
-=======
-
-This version of KGDB was written for 2.4.xx kernels for the SH architecture.
-Further documentation is available from the linux-sh project website.
-
-
-Debugging Setup: Host
-======================
-
-The two machines will be connected together via a serial line - this
-should be a null modem cable i.e. with a twist.
-
-On your DEVELOPMENT machine, go to your kernel source directory and
-build the kernel, enabling KGDB support in the "kernel hacking" section.
-This includes the KGDB code, and also makes the kernel be compiled with
-the "-g" option set -- necessary for debugging.
-
-To install this new kernel, use the following installation procedure.
-
-Decide on which tty port you want the machines to communicate, then
-cable them up back-to-back using the null modem.  On the DEVELOPMENT
-machine, you may wish to create an initialization file called .gdbinit
-(in the kernel source directory or in your home directory) to execute 
-commonly-used commands at startup.
-
-A minimal .gdbinit might look like this:
-
-  file vmlinux
-  set remotebaud 115200
-  target remote /dev/ttyS0
-
-Change the "target" definition so that it specifies the tty port that
-you intend to use.  Change the "remotebaud" definition to match the
-data rate that you are going to use for the com line (115200 is the
-default). 
-
-Debugging Setup: Target
-========================
-
-By default, the KGDB stub will communicate with the host GDB using
-ttySC1 at 115200 baud, 8 databits, no parity; these defaults can be
-changed in the kernel configuration. As the kernel starts up, KGDB will
-initialize so that breakpoints, kernel segfaults, and so forth will
-generally enter the debugger.
-
-This behavior can be modified by including the "kgdb" option in the
-kernel command line; this option has the general form:
-
-  kgdb=<ttyspec>,<action>
-
-The <ttyspec> indicates the port to use, and can optionally specify
-baud, parity and databits -- e.g. "ttySC0,9600N8" or "ttySC1,19200".
-
-The <action> can be "halt" or "disabled".  The "halt" action enters the
-debugger via a breakpoint as soon as kgdb is initialized; the "disabled"
-action causes kgdb to ignore kernel segfaults and such until explicitly
-entered by a breakpoint in the code or by external action (sysrq or NMI). 
-
-(Both <ttyspec> and <action> can appear alone, w/o the separating comma.)
-
-For example, if you wish to debug early in kernel startup code, you
-might specify the halt option:
-
-  kgdb=halt
-
-Boot the TARGET machine, which will appear to hang. 
-
-On your DEVELOPMENT machine, cd to the source directory and run the gdb
-program.  (This is likely to be a cross GDB which runs on your host but
-is built for an SH target.) If everything is working correctly you
-should see gdb print out a few lines indicating that a breakpoint has
-been taken.  It will actually show a line of code in the target kernel
-inside the gdbstub activation code.
-
-NOTE: BE SURE TO TERMINATE OR SUSPEND any other host application which
-may be using the same serial port (for example, a terminal emulator you
-have been using to connect to the target boot code.)  Otherwise, data
-from the target may not all get to GDB!
-
-You can now use whatever gdb commands you like to set breakpoints.
-Enter "continue" to start your target machine executing again.  At this
-point the target system will run at full speed until it encounters
-your breakpoint or gets a segment violation in the kernel, or whatever.
-
-Serial Ports: KGDB, Console
-============================
-
-This version of KGDB may not gracefully handle conflict with other
-drivers in the kernel using the same port. If KGDB is configured on the
-same port (and with the same parameters) as the kernel console, or if
-CONFIG_SH_KGDB_CONSOLE is configured, things should be fine (though in
-some cases console messages may appear twice through GDB).  But if the
-KGDB port is not the kernel console and used by another serial driver
-which assumes different serial parameters (e.g. baud rate) KGDB may not
-recover.
-
-Also, when KGDB is entered via sysrq-g (requires CONFIG_KGDB_SYSRQ) and
-the kgdb port uses the same port as the console, detaching GDB will not
-restore the console to working order without the port being re-opened.
-
-Another serious consequence of this is that GDB currently CANNOT break
-into KGDB externally (e.g. via ^C or <BREAK>); unless a breakpoint or
-error is encountered, the only way to enter KGDB after the initial halt
-(see above) is via NMI (CONFIG_KGDB_NMI) or sysrq-g (CONFIG_KGDB_SYSRQ).
-
-Code is included for the basic Hitachi Solution Engine boards to allow
-the use of ttyS0 for KGDB if desired; this is less robust, but may be
-useful in some cases.  (This cannot be selected using the config file, 
-but only through the kernel command line, e.g. "kgdb=ttyS0", though the
-configured defaults for baud rate etc. still apply if not overridden.)
-
-If gdbstub Does Not Work
-========================
-
-If it doesn't work, you will have to troubleshoot it.  Do the easy
-things first like double checking your cabling and data rates.  You
-might try some non-kernel based programs to see if the back-to-back
-connection works properly.  Just something simple like cat /etc/hosts
-/dev/ttyS0 on one machine and cat /dev/ttyS0 on the other will tell you
-if you can send data from one machine to the other.  There is no point
-in tearing out your hair in the kernel if the line doesn't work.
-
-If you need to debug the GDB/KGDB communication itself, the gdb commands
-"set debug remote 1" and "set debug serial 1" may be useful, but be
-warned: they produce a lot of output.
-
-Threads
-=======
-
-Each process in a target machine is seen as a gdb thread. gdb thread related
-commands (info threads, thread n) can be used. CONFIG_KGDB_THREAD must
-be defined for this to work.
-
-In this version, kgdb reports PID_MAX (32768) as the process ID for the
-idle process (pid 0), since GDB does not accept 0 as an ID.
-
-Detaching (exiting KGDB)
-=========================
-
-There are two ways to resume full-speed target execution: "continue" and
-"detach". With "continue", GDB inserts any specified breakpoints in the
-target code and resumes execution; the target is still in "gdb mode".
-If a breakpoint or other debug event (e.g. NMI) happens, the target
-halts and communicates with GDB again, which is waiting for it.
-
-With "detach", GDB does *not* insert any breakpoints; target execution
-is resumed and GDB stops communicating (does not wait for the target).
-In this case, the target is no longer in "gdb mode" -- for example,
-console messages no longer get sent separately to the KGDB port, or
-encapsulated for GDB.  If a debug event (e.g. NMI) occurs, the target
-will re-enter "gdb mode" and will display this fact on the console; you
-must give a new "target remote" command to gdb.
-
-NOTE: TO AVOID LOSSING CONSOLE MESSAGES IN CASE THE KERNEL CONSOLE AND
-KGDB USING THE SAME PORT, THE TARGET WAITS FOR ANY INPUT CHARACTER ON
-THE KGDB PORT AFTER A DETACH COMMAND.  For example, after the detach you
-could start a terminal emulator on the same host port and enter a <cr>;
-however, this program must then be terminated or suspended in order to
-use GBD again if KGDB is re-entered.
-
-
-Acknowledgements
-================
-
-This code was mostly generated by Henry Bell <henry.bell@st.com>;
-largely from KGDB by Amit S. Kale <akale@veritas.com> - extracts from
-code by Glenn Engel, Jim Kingdon, David Grothe <dave@gcom.com>, Tigran
-Aivazian <tigran@sco.com>, William Gatliff <bgat@open-widgets.com>, Ben
-Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com> are also
-included. 
-
-Jeremy Siegel
-<jsiegel@mvista.com>

arch/sh/Kconfig

@@ -13,6 +13,7 @@ config SUPERH
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IOREMAP_PROT if MMU
+	select HAVE_ARCH_TRACEHOOK
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -23,8 +24,10 @@ config SUPERH32
 	def_bool !SUPERH64
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
-	select HAVE_ARCH_TRACEHOOK
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_ARCH_KGDB
 
 config SUPERH64
 	def_bool y if CPU_SH5
@@ -55,8 +58,6 @@ config GENERIC_HARDIRQS
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
-	depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
-				!SH_7751_SYSTEMH && !HD64461)
 
 config GENERIC_IRQ_PROBE
 	def_bool y
@@ -85,10 +86,17 @@ config GENERIC_LOCKBREAK
 
 config SYS_SUPPORTS_PM
 	bool
+	depends on !SMP
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool n
+
+config ARCH_HIBERNATION_POSSIBLE
+	def_bool n
 
 config SYS_SUPPORTS_APM_EMULATION
 	bool
-	select SYS_SUPPORTS_PM
+	select ARCH_SUSPEND_POSSIBLE
 
 config SYS_SUPPORTS_SMP
 	bool
@@ -183,6 +191,11 @@ config CPU_SUBTYPE_SH7619
 
 # SH-2A Processor Support
 
+config CPU_SUBTYPE_SH7201
+	bool "Support SH7201 processor"
+	select CPU_SH2A
+	select CPU_HAS_FPU
+ 
 config CPU_SUBTYPE_SH7203
 	bool "Support SH7203 processor"
 	select CPU_SH2A
@@ -456,8 +469,12 @@ config SH_CPU_FREQ
 	depends on CPU_FREQ
 	select CPU_FREQ_TABLE
 	help
-	  This adds the cpufreq driver for SuperH. At present, only
-	  the SH-4 is supported.
+	  This adds the cpufreq driver for SuperH. Any CPU that supports
+	  clock rate rounding through the clock framework can use this
+	  driver. While it will make the kernel slightly larger, this is
+	  harmless for CPUs that don't support rate rounding. The driver
+	  will also generate a notice in the boot log before disabling
+	  itself if the CPU in question is not capable of rate rounding.
 
 	  For details, take a look at <file:Documentation/cpu-freq>.
 
@@ -469,9 +486,6 @@ source "arch/sh/drivers/Kconfig"
 
 endmenu
 
-config ISA_DMA_API
-	bool
-
 menu "Kernel features"
 
 source kernel/Kconfig.hz
@@ -688,49 +702,6 @@ config MAPLE
          Dreamcast with a serial line terminal or a remote network
          connection.
 
-config CF_ENABLER
-	bool "Compact Flash Enabler support"
-	depends on SOLUTION_ENGINE || SH_SH03
-	---help---
-	  Compact Flash is a small, removable mass storage device introduced
-	  in 1994 originally as a PCMCIA device.  If you say `Y' here, you
-	  compile in support for Compact Flash devices directly connected to
-	  a SuperH processor.  A Compact Flash FAQ is available at
-	  <http://www.compactflash.org/faqs/faq.htm>.
-
-	  If your board has "Directly Connected" CompactFlash at area 5 or 6,
-	  you may want to enable this option.  Then, you can use CF as
-	  primary IDE drive (only tested for SanDisk).
-
-	  If in doubt, select 'N'.
-
-choice
-	prompt "Compact Flash Connection Area"
-	depends on CF_ENABLER
-	default CF_AREA6
-
-config CF_AREA5
-	bool "Area5"
-	help
-	  If your board has "Directly Connected" CompactFlash, You should
-	  select the area where your CF is connected to.
-
-	  - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
-	  - "Area6" if it is connected to Area 6 (0x18000000)
-
-	  "Area6" will work for most boards.
-
-config CF_AREA6
-	bool "Area6"
-
-endchoice
-
-config CF_BASE_ADDR
-	hex
-	depends on CF_ENABLER
-	default "0xb8000000" if CF_AREA6
-	default "0xb4000000" if CF_AREA5
-
 source "arch/sh/drivers/pci/Kconfig"
 
 source "drivers/pci/Kconfig"
@@ -748,13 +719,11 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL && SYS_SUPPORTS_PM
+depends on EXPERIMENTAL
 
-config ARCH_SUSPEND_POSSIBLE
-	def_bool y
-	depends on !SMP
+source "kernel/power/Kconfig"
 
-source kernel/power/Kconfig
+source "drivers/cpuidle/Kconfig"
 
 endmenu
 

arch/sh/Kconfig.debug

@@ -98,18 +98,29 @@ config IRQSTACKS
 	  for handling hard and soft interrupts.  This can help avoid
 	  overflowing the process kernel stacks.
 
-config SH_KGDB
-	bool "Include KGDB kernel debugger"
-	select FRAME_POINTER
-	select DEBUG_INFO
-	depends on CPU_SH3 || CPU_SH4
+config DUMP_CODE
+	bool "Show disassembly of nearby code in register dumps"
+	depends on DEBUG_KERNEL && SUPERH32
+	default y if DEBUG_BUGVERBOSE
+	default n
+	help
+	  This prints out a code trace of the instructions leading up to
+	  the faulting instruction as a debugging aid. As this does grow
+	  the kernel in size a bit, most users will want to say N here.
+
+	  Those looking for more verbose debugging output should say Y.
+
+config SH_NO_BSS_INIT
+	bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
+	depends on DEBUG_KERNEL
+	default n
 	help
-	  Include in-kernel hooks for kgdb, the Linux kernel source level
-	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
-	  Unless you are intending to debug the kernel, say N here.
+	  If running in painfully slow environments, such as an RTL
+	  simulation or from remote memory via SHdebug, where the memory
+	  can already be gauranteed to ber zeroed on boot, say Y.
 
-menu "KGDB configuration options"
-	depends on SH_KGDB
+	  For all other cases, say N. If this option seems perplexing, or
+	  you aren't sure, say N.
 
 config MORE_COMPILE_OPTIONS
 	bool "Add any additional compile options"
@@ -122,85 +133,16 @@ config COMPILE_OPTIONS
 	string "Additional compile arguments"
 	depends on MORE_COMPILE_OPTIONS
 
-config KGDB_NMI
-	def_bool n
-	prompt "Enter KGDB on NMI"
-
-config SH_KGDB_CONSOLE
-	def_bool n
-	prompt "Console messages through GDB"
-	depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y
-	select SERIAL_CORE_CONSOLE
-
-config KGDB_SYSRQ
-	def_bool y
-	prompt "Allow SysRq 'G' to enter KGDB"
-	depends on MAGIC_SYSRQ
-
-comment "Serial port setup"
-
-config KGDB_DEFPORT
-	int "Port number (ttySCn)"
-	default "1"
-
-config KGDB_DEFBAUD
-	int "Baud rate"
-	default "115200"
-
-choice
-	prompt "Parity"
-	depends on SH_KGDB
-	default KGDB_DEFPARITY_N
-
-config KGDB_DEFPARITY_N
-	bool "None"
-
-config KGDB_DEFPARITY_E
-	bool "Even"
-
-config KGDB_DEFPARITY_O
-	bool "Odd"
-
-endchoice
-
-choice
-	prompt "Data bits"
-	depends on SH_KGDB
-	default KGDB_DEFBITS_8
-
-config KGDB_DEFBITS_8
-	bool "8"
-
-config KGDB_DEFBITS_7
-	bool "7"
-
-endchoice
-
-endmenu
-
-if SUPERH64
-
-config SH64_PROC_ASIDS
-	bool "Debug: report ASIDs through /proc/asids"
-	depends on PROC_FS && MMU
-
 config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
+	depends on SUPERH64
 
 config POOR_MANS_STRACE
 	bool "Debug: enable rudimentary strace facility"
+	depends on SUPERH64
 	help
 	  This option allows system calls to be traced to the console.  It also
 	  aids in detecting kernel stack underflow.  It is useful for debugging
 	  early-userland problems (e.g. init incurring fatal exceptions.)
 
-config SH_ALPHANUMERIC
-	bool "Enable debug outputs to on-board alphanumeric display"
-	depends on SH_CAYMAN
-
-config SH_NO_BSS_INIT
-	bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
-
-endif
-
 endmenu

arch/sh/Makefile

@@ -32,6 +32,7 @@ cflags-$(CONFIG_CPU_SH4)		:= $(call cc-option,-m4,) \
 	$(call cc-option,-mno-implicit-fp,-m4-nofpu)
 cflags-$(CONFIG_CPU_SH4A)		+= $(call cc-option,-m4a,) \
 					   $(call cc-option,-m4a-nofpu,)
+cflags-$(CONFIG_CPU_SH4AL_DSP)		+= $(call cc-option,-m4al,)
 cflags-$(CONFIG_CPU_SH5)		:= $(call cc-option,-m5-32media-nofpu,)
 
 ifeq ($(cflags-y),)
@@ -39,22 +40,16 @@ ifeq ($(cflags-y),)
 # In the case where we are stuck with a compiler that has been uselessly
 # restricted to a particular ISA, a favourite default of newer GCCs when
 # extensive multilib targets are not provided, ensure we get the best fit
-# regarding FP generation. This is necessary to avoid references to FP
-# variants in libgcc where integer variants exist, which otherwise result
-# in link errors. This is intentionally stupid (albeit many orders of
-# magnitude less than GCC's default behaviour), as anything with a large
-# number of multilib targets better have been built correctly for
-# the target in mind.
+# regarding FP generation. This is intentionally stupid (albeit many
+# orders of magnitude less than GCC's default behaviour), as anything
+# with a large number of multilib targets better have been built
+# correctly for the target in mind.
 #
 cflags-y	+= $(shell $(CC) $(KBUILD_CFLAGS) -print-multi-lib | \
 		     grep nofpu | sed q | sed -e 's/^/-/;s/;.*$$//')
-endif
-
-cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
-
-cflags-y	+= $(call cc-option,-mno-fdpic)
-
+# At this point, anything goes.
+isaflags-y	:= $(call as-option,-Wa$(comma)-isa=any,)
+else
 #
 # -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
 # support it, while -Wa,-dsp by itself limits the range of usable opcodes
@@ -67,7 +62,12 @@ isaflags-y	:= $(call as-option,-Wa$(comma)-isa=$(isa-y),)
 
 isaflags-$(CONFIG_SH_DSP)		:= \
 	$(call as-option,-Wa$(comma)-isa=$(isa-y),-Wa$(comma)-dsp)
+endif
 
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
+
+cflags-y	+= $(call cc-option,-mno-fdpic)
 cflags-y	+= $(isaflags-y) -ffreestanding
 
 cflags-$(CONFIG_MORE_COMPILE_OPTIONS)	+= \
@@ -79,6 +79,9 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 # Give the various platforms the opportunity to set default image types
 defaultimage-$(CONFIG_SUPERH32)			:= zImage
 defaultimage-$(CONFIG_SH_SH7785LCR)		:= uImage
+defaultimage-$(CONFIG_SH_RSK)			:= uImage
+defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= vmlinux
+defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= vmlinux
 
 # Set some sensible Kbuild defaults
 KBUILD_DEFCONFIG	:= shx3_defconfig
@@ -132,6 +135,7 @@ machdir-$(CONFIG_SH_LANDISK)			+= mach-landisk
 machdir-$(CONFIG_SH_TITAN)			+= mach-titan
 machdir-$(CONFIG_SH_LBOX_RE2)			+= mach-lboxre2
 machdir-$(CONFIG_SH_CAYMAN)			+= mach-cayman
+machdir-$(CONFIG_SH_RSK)			+= mach-rsk
 
 ifneq ($(machdir-y),)
 core-y	+= $(addprefix arch/sh/boards/, \
@@ -173,11 +177,8 @@ KBUILD_CFLAGS		+= -pipe $(cflags-y)
 KBUILD_CPPFLAGS		+= $(cflags-y)
 KBUILD_AFLAGS		+= $(cflags-y)
 
-LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
-libs-y				+= $(LIBGCC)
 
 PHONY += maketools FORCE
 

arch/sh/boards/Kconfig

@@ -126,10 +126,12 @@ config SH_RTS7751R2D
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
 
-config SH_RSK7203
-	bool "RSK7203"
-	select GENERIC_GPIO
-	depends on CPU_SUBTYPE_SH7203
+config SH_RSK
+	bool "Renesas Starter Kit"
+	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203
+	help
+	 Select this option if configuring for any of the RSK+ MCU
+	 evaluation platforms.
 
 config SH_SDK7780
 	bool "SDK7780R3"
@@ -253,6 +255,7 @@ source "arch/sh/boards/mach-r2d/Kconfig"
 source "arch/sh/boards/mach-highlander/Kconfig"
 source "arch/sh/boards/mach-sdk7780/Kconfig"
 source "arch/sh/boards/mach-migor/Kconfig"
+source "arch/sh/boards/mach-rsk/Kconfig"
 
 if SH_MAGIC_PANEL_R2
 

arch/sh/boards/Makefile

@@ -3,7 +3,6 @@
 #
 obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
-obj-$(CONFIG_SH_RSK7203)	+= board-rsk7203.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o

arch/sh/boards/board-ap325rxa.c

@@ -197,6 +197,10 @@ static struct resource lcdc_resources[] = {
 		.end	= 0xfe941fff,
 		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device lcdc_device = {
@@ -303,6 +307,7 @@ static struct resource ceu_resources[] = {
 
 static struct platform_device ceu_device = {
 	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
 	.num_resources	= ARRAY_SIZE(ceu_resources),
 	.resource	= ceu_resources,
 	.dev		= {
@@ -344,7 +349,6 @@ static int __init ap325rxa_devices_setup(void)
 	gpio_export(GPIO_PTF7, 0);
 
 	/* LCDC */
-	clk_always_enable("mstp200");
 	gpio_request(GPIO_FN_LCDD15, NULL);
 	gpio_request(GPIO_FN_LCDD14, NULL);
 	gpio_request(GPIO_FN_LCDD13, NULL);
@@ -375,7 +379,6 @@ static int __init ap325rxa_devices_setup(void)
 	gpio_direction_output(GPIO_PTS3, 1);
 
 	/* CEU */
-	clk_always_enable("mstp203");
 	gpio_request(GPIO_FN_VIO_CLK2, NULL);
 	gpio_request(GPIO_FN_VIO_VD2, NULL);
 	gpio_request(GPIO_FN_VIO_HD2, NULL);

arch/sh/boards/board-shmin.c

@@ -22,21 +22,13 @@ static void __init init_shmin_irq(void)
 	plat_irq_setup_pins(IRQ_MODE_IRQ);
 }
 
-static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
+static void __init shmin_setup(char **cmdline_p)
 {
-	static int dummy;
-
-	if ((port & ~0x1f) == SHMIN_NE_BASE)
-		return (void __iomem *)(SHMIN_IO_BASE + port);
-
-	dummy = 0;
-
-	return &dummy;
-
+	__set_io_port_base(SHMIN_IO_BASE);
 }
 
 static struct sh_machine_vector mv_shmin __initmv = {
 	.mv_name	= "SHMIN",
+	.mv_setup	= shmin_setup,
 	.mv_init_irq	= init_shmin_irq,
-	.mv_ioport_map	= shmin_ioport_map,
 };

arch/sh/boards/mach-cayman/Makefile

@@ -2,4 +2,3 @@
 # Makefile for the Hitachi Cayman specific parts of the kernel
 #
 obj-y := setup.o irq.o
-obj-$(CONFIG_HEARTBEAT)	+= led.o

arch/sh/boards/mach-cayman/irq.c

@@ -94,31 +94,11 @@ static void ack_cayman_irq(unsigned int irq)
 	disable_cayman_irq(irq);
 }
 
-static void end_cayman_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_cayman_irq(irq);
-}
-
-static unsigned int startup_cayman_irq(unsigned int irq)
-{
-	enable_cayman_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_cayman_irq(unsigned int irq)
-{
-	disable_cayman_irq(irq);
-}
-
-struct hw_interrupt_type cayman_irq_type = {
-	.typename	= "Cayman-IRQ",
-	.startup	= startup_cayman_irq,
-	.shutdown	= shutdown_cayman_irq,
-	.enable		= enable_cayman_irq,
-	.disable	= disable_cayman_irq,
-	.ack		= ack_cayman_irq,
-	.end		= end_cayman_irq,
+struct irq_chip cayman_irq_type = {
+	.name		= "Cayman-IRQ",
+	.unmask 	= enable_cayman_irq,
+	.mask		= disable_cayman_irq,
+	.mask_ack	= ack_cayman_irq,
 };
 
 int cayman_irq_demux(int evt)
@@ -187,8 +167,9 @@ void init_cayman_irq(void)
 		return;
 	}
 
-	for (i=0; i<NR_EXT_IRQS; i++) {
-		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
+	for (i = 0; i < NR_EXT_IRQS; i++) {
+		set_irq_chip_and_handler(START_EXT_IRQS + i, &cayman_irq_type,
+					 handle_level_irq);
 	}
 
 	/* Setup the SMSC interrupt */

arch/sh/boards/mach-cayman/led.c

@@ -1,51 +0,0 @@
-/*
- * arch/sh/boards/cayman/led.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Flash the LEDs
- */
-#include <asm/io.h>
-
-/*
-** It is supposed these functions to be used for a low level
-** debugging (via Cayman LEDs), hence to be available as soon
-** as possible.
-** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped
-** (this happen when IRQ are initialized... quite late).
-** These triky dependencies should be removed. Temporary, it
-** may be enough to NOP until EPLD is mapped.
-*/
-
-extern unsigned long epld_virt;
-
-#define LED_ADDR      (epld_virt + 0x008)
-#define HDSP2534_ADDR (epld_virt + 0x100)
-
-void mach_led(int position, int value)
-{
-	if (!epld_virt)
-		return;
-
-	if (value)
-		ctrl_outl(0, LED_ADDR);
-	else
-		ctrl_outl(1, LED_ADDR);
-
-}
-
-void mach_alphanum(int position, unsigned char value)
-{
-	if (!epld_virt)
-		return;
-
-	ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2));
-}
-
-void mach_alphanum_brightness(int setting)
-{
-	ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0);
-}

arch/sh/boards/mach-dreamcast/irq.c

@@ -10,106 +10,90 @@
  */
 
 #include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/irq.h>
 #include <mach/sysasic.h>
 
-/* Dreamcast System ASIC Hardware Events -
-
-   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
-   hardware events from system peripherals and triggering an SH7750 IRQ.
-   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
-   set in the Event Mask Registers (EMRs).  When a hardware event is
-   triggered, it's corresponding bit in the Event Status Registers (ESRs)
-   is set, and that bit should be rewritten to the ESR to acknowledge that
-   event.
-
-   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
-   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
-   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
-   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
-   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
-
-   In the kernel, these events are mapped to virtual IRQs so that drivers can
-   respond to them as they would a normal interrupt.  In order to keep this
-   mapping simple, the events are mapped as:
-
-   6900/6910 - Events  0-31, IRQ 13
-   6904/6924 - Events 32-63, IRQ 11
-   6908/6938 - Events 64-95, IRQ  9
-
-*/
+/*
+ * Dreamcast System ASIC Hardware Events -
+ *
+ * The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
+ * hardware events from system peripherals and triggering an SH7750 IRQ.
+ * Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
+ * set in the Event Mask Registers (EMRs).  When a hardware event is
+ * triggered, its corresponding bit in the Event Status Registers (ESRs)
+ * is set, and that bit should be rewritten to the ESR to acknowledge that
+ * event.
+ *
+ * There are three 32-bit ESRs located at 0xa05f6900 - 0xa05f6908.  Event
+ * types can be found in arch/sh/include/mach-dreamcast/mach/sysasic.h.
+ * There are three groups of EMRs that parallel the ESRs.  Each EMR group
+ * corresponds to an IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13,
+ * 0xa05f6920 - 0xa05f6928 triggers IRQ 11, and 0xa05f6930 - 0xa05f6938
+ * triggers IRQ 9.
+ *
+ * In the kernel, these events are mapped to virtual IRQs so that drivers can
+ * respond to them as they would a normal interrupt.  In order to keep this
+ * mapping simple, the events are mapped as:
+ *
+ * 6900/6910 - Events  0-31, IRQ 13
+ * 6904/6924 - Events 32-63, IRQ 11
+ * 6908/6938 - Events 64-95, IRQ  9
+ *
+ */
 
 #define ESR_BASE 0x005f6900    /* Base event status register */
 #define EMR_BASE 0x005f6910    /* Base event mask register */
 
-/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
-   1 = 0x6920, 2 = 0x6930; also determine the event offset */
+/*
+ * Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
+ * 1 = 0x6920, 2 = 0x6930; also determine the event offset.
+ */
 #define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
 
 /* Return the hardware event's bit positon within the EMR/ESR */
 #define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
 
-/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
-   (logically mapped to the corresponding bit for the hardware event). */
+/*
+ * For each of these *_irq routines, the IRQ passed in is the virtual IRQ
+ * (logically mapped to the corresponding bit for the hardware event).
+ */
 
 /* Disable the hardware event by masking its bit in its EMR */
 static inline void disable_systemasic_irq(unsigned int irq)
 {
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
+	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+	__u32 mask;
 
-        mask = inl(emr);
-        mask &= ~(1 << EVENT_BIT(irq));
-        outl(mask, emr);
+	mask = inl(emr);
+	mask &= ~(1 << EVENT_BIT(irq));
+	outl(mask, emr);
 }
 
 /* Enable the hardware event by setting its bit in its EMR */
 static inline void enable_systemasic_irq(unsigned int irq)
 {
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
+	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+	__u32 mask;
 
-        mask = inl(emr);
-        mask |= (1 << EVENT_BIT(irq));
-        outl(mask, emr);
+	mask = inl(emr);
+	mask |= (1 << EVENT_BIT(irq));
+	outl(mask, emr);
 }
 
 /* Acknowledge a hardware event by writing its bit back to its ESR */
-static void ack_systemasic_irq(unsigned int irq)
-{
-        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
-        disable_systemasic_irq(irq);
-        outl((1 << EVENT_BIT(irq)), esr);
-}
-
-/* After a IRQ has been ack'd and responded to, it needs to be renabled */
-static void end_systemasic_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                enable_systemasic_irq(irq);
-}
-
-static unsigned int startup_systemasic_irq(unsigned int irq)
-{
-        enable_systemasic_irq(irq);
-
-        return 0;
-}
-
-static void shutdown_systemasic_irq(unsigned int irq)
+static void mask_ack_systemasic_irq(unsigned int irq)
 {
-        disable_systemasic_irq(irq);
+	__u32 esr = ESR_BASE + (LEVEL(irq) << 2);
+	disable_systemasic_irq(irq);
+	outl((1 << EVENT_BIT(irq)), esr);
 }
 
-struct hw_interrupt_type systemasic_int = {
-        .typename       = "System ASIC",
-        .startup        = startup_systemasic_irq,
-        .shutdown       = shutdown_systemasic_irq,
-        .enable         = enable_systemasic_irq,
-        .disable        = disable_systemasic_irq,
-        .ack            = ack_systemasic_irq,
-        .end            = end_systemasic_irq,
+struct irq_chip systemasic_int = {
+	.name		= "System ASIC",
+	.mask		= disable_systemasic_irq,
+	.mask_ack	= mask_ack_systemasic_irq,
+	.unmask		= enable_systemasic_irq,
 };
 
 /*
@@ -117,37 +101,37 @@ struct hw_interrupt_type systemasic_int = {
  */
 int systemasic_irq_demux(int irq)
 {
-        __u32 emr, esr, status, level;
-        __u32 j, bit;
-
-        switch (irq) {
-                case 13:
-                        level = 0;
-                        break;
-                case 11:
-                        level = 1;
-                        break;
-                case  9:
-                        level = 2;
-                        break;
-                default:
-                        return irq;
-        }
-        emr = EMR_BASE + (level << 4) + (level << 2);
-        esr = ESR_BASE + (level << 2);
-
-        /* Mask the ESR to filter any spurious, unwanted interrupts */
-        status = inl(esr);
-        status &= inl(emr);
-
-        /* Now scan and find the first set bit as the event to map */
-        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
-                if (status & bit) {
-                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
-                        return irq;
-                }
-        }
-
-        /* Not reached */
-        return irq;
+	__u32 emr, esr, status, level;
+	__u32 j, bit;
+
+	switch (irq) {
+	case 13:
+		level = 0;
+		break;
+	case 11:
+		level = 1;
+		break;
+	case  9:
+		level = 2;
+		break;
+	default:
+		return irq;
+	}
+	emr = EMR_BASE + (level << 4) + (level << 2);
+	esr = ESR_BASE + (level << 2);
+
+	/* Mask the ESR to filter any spurious, unwanted interrupts */
+	status = inl(esr);
+	status &= inl(emr);
+
+	/* Now scan and find the first set bit as the event to map */
+	for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
+		if (status & bit) {
+			irq = HW_EVENT_IRQ_BASE + j + (level << 5);
+			return irq;
+		}
+	}
+
+	/* Not reached */
+	return irq;
 }

arch/sh/boards/mach-dreamcast/setup.c

@@ -28,7 +28,7 @@
 #include <asm/machvec.h>
 #include <mach/sysasic.h>
 
-extern struct hw_interrupt_type systemasic_int;
+extern struct irq_chip systemasic_int;
 extern void aica_time_init(void);
 extern int gapspci_init(void);
 extern int systemasic_irq_demux(int);
@@ -47,7 +47,8 @@ static void __init dreamcast_setup(char **cmdline_p)
 
 	/* Assign all virtual IRQs to the System ASIC int. handler */
 	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
-		irq_desc[i].chip = &systemasic_int;
+		set_irq_chip_and_handler(i, &systemasic_int,
+					 handle_level_irq);
 
 	board_time_init = aica_time_init;
 

arch/sh/boards/mach-edosk7705/Makefile

@@ -3,4 +3,3 @@
 #
 
 obj-y	 := setup.o io.o
-

arch/sh/boards/mach-edosk7705/io.c

@@ -10,28 +10,24 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/edosk7705.h>
 #include <asm/addrspace.h>
 
 #define SMC_IOADDR	0xA2000000
 
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
 /* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
+static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
 {
-     if (port >= 0x300 && port < 0x320) {
-	  /* SMC91C96 registers are 4 byte aligned rather than the
-	   * usual 2 byte!
-	   */
-	  return SMC_IOADDR + ( (port - 0x300) * 2);
-     }
+	/*
+	 * SMC91C96 registers are 4 byte aligned rather than the
+	 * usual 2 byte!
+	 */
+	if (port >= 0x300 && port < 0x320)
+		return SMC_IOADDR + ((port - 0x300) * 2);
 
-     maybebadio(sh_edosk7705_isa_port2addr, port);
-     return port;
+	maybebadio(port);
+	return port;
 }
 
 /* Trying to read / write bytes on odd-byte boundaries to the Ethernet
@@ -42,53 +38,34 @@ unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
  */
 unsigned char sh_edosk7705_inb(unsigned long port)
 {
-	if (port >= 0x300 && port < 0x320 && port & 0x01) {
-		return (volatile unsigned char)(generic_inw(port -1) >> 8);
-	}
-	return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port);
-}
+	if (port >= 0x300 && port < 0x320 && port & 0x01)
+		return __raw_readw(port - 1) >> 8;
 
-unsigned int sh_edosk7705_inl(unsigned long port)
-{
-	return *(volatile unsigned long *)port;
+	return __raw_readb(sh_edosk7705_isa_port2addr(port));
 }
 
 void sh_edosk7705_outb(unsigned char value, unsigned long port)
 {
 	if (port >= 0x300 && port < 0x320 && port & 0x01) {
-		generic_outw(((unsigned short)value << 8), port -1);
+		__raw_writew(((unsigned short)value << 8), port - 1);
 		return;
 	}
-	*(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value;
-}
 
-void sh_edosk7705_outl(unsigned int value, unsigned long port)
-{
-	*(volatile unsigned long *)port = value;
+	__raw_writeb(value, sh_edosk7705_isa_port2addr(port));
 }
 
 void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
 {
 	unsigned char *p = addr;
-	while (count--) *p++ = sh_edosk7705_inb(port);
-}
 
-void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned long *p = (unsigned long*)addr;
 	while (count--)
-		*p++ = *(volatile unsigned long *)port;
+		*p++ = sh_edosk7705_inb(port);
 }
 
 void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
 {
-	unsigned char *p = (unsigned char*)addr;
-	while (count--) sh_edosk7705_outb(*p++, port);
-}
+	unsigned char *p = (unsigned char *)addr;
 
-void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned long *p = (unsigned long*)addr;
-	while (count--) sh_edosk7705_outl(*p++, port);
+	while (count--)
+		sh_edosk7705_outb(*p++, port);
 }
-

arch/sh/boards/mach-edosk7705/setup.c

@@ -9,6 +9,7 @@
  * board by S. Dunn, 2003.
  */
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <asm/machvec.h>
 #include <mach/edosk7705.h>
 
@@ -26,18 +27,10 @@ static struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_nr_irqs		= 80,
 
 	.mv_inb			= sh_edosk7705_inb,
-	.mv_inl			= sh_edosk7705_inl,
 	.mv_outb		= sh_edosk7705_outb,
-	.mv_outl		= sh_edosk7705_outl,
-
-	.mv_inl_p		= sh_edosk7705_inl,
-	.mv_outl_p		= sh_edosk7705_outl,
 
 	.mv_insb		= sh_edosk7705_insb,
-	.mv_insl		= sh_edosk7705_insl,
 	.mv_outsb		= sh_edosk7705_outsb,
-	.mv_outsl		= sh_edosk7705_outsl,
 
-	.mv_isa_port2addr	= sh_edosk7705_isa_port2addr,
 	.mv_init_irq		= sh_edosk7705_init_irq,
 };

arch/sh/boards/mach-hp6xx/pm.c

@@ -10,15 +10,91 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
 #include <asm/io.h>
 #include <asm/hd64461.h>
 #include <mach/hp6xx.h>
 #include <cpu/dac.h>
-#include <asm/pm.h>
+#include <asm/freq.h>
+#include <asm/watchdog.h>
+
+#define INTR_OFFSET	0x600
 
 #define STBCR		0xffffff82
 #define STBCR2		0xffffff88
 
+#define STBCR_STBY	0x80
+#define STBCR_MSTP2	0x04
+
+#define MCR		0xffffff68
+#define RTCNT		0xffffff70
+
+#define MCR_RMODE	2
+#define MCR_RFSH	4
+
+extern u8 wakeup_start;
+extern u8 wakeup_end;
+
+static void pm_enter(void)
+{
+	u8 stbcr, csr;
+	u16 frqcr, mcr;
+	u32 vbr_new, vbr_old;
+
+	set_bl_bit();
+
+	/* set wdt */
+	csr = sh_wdt_read_csr();
+	csr &= ~WTCSR_TME;
+	csr |= WTCSR_CKS_4096;
+	sh_wdt_write_csr(csr);
+	csr = sh_wdt_read_csr();
+	sh_wdt_write_cnt(0);
+
+	/* disable PLL1 */
+	frqcr = ctrl_inw(FRQCR);
+	frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
+	ctrl_outw(frqcr, FRQCR);
+
+	/* enable standby */
+	stbcr = ctrl_inb(STBCR);
+	ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+
+	/* set self-refresh */
+	mcr = ctrl_inw(MCR);
+	ctrl_outw(mcr & ~MCR_RFSH, MCR);
+
+	/* set interrupt handler */
+	asm volatile("stc vbr, %0" : "=r" (vbr_old));
+	vbr_new = get_zeroed_page(GFP_ATOMIC);
+	udelay(50);
+	memcpy((void*)(vbr_new + INTR_OFFSET),
+	       &wakeup_start, &wakeup_end - &wakeup_start);
+	asm volatile("ldc %0, vbr" : : "r" (vbr_new));
+
+	ctrl_outw(0, RTCNT);
+	ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
+
+	cpu_sleep();
+
+	asm volatile("ldc %0, vbr" : : "r" (vbr_old));
+
+	free_page(vbr_new);
+
+	/* enable PLL1 */
+	frqcr = ctrl_inw(FRQCR);
+	frqcr |= FRQCR_PSTBY;
+	ctrl_outw(frqcr, FRQCR);
+	udelay(50);
+	frqcr |= FRQCR_PLLEN;
+	ctrl_outw(frqcr, FRQCR);
+
+	ctrl_outb(stbcr, STBCR);
+
+	clear_bl_bit();
+}
+
 static int hp6x0_pm_enter(suspend_state_t state)
 {
 	u8 stbcr, stbcr2;

arch/sh/boards/mach-microdev/Makefile

@@ -2,7 +2,4 @@
 # Makefile for the SuperH MicroDev specific parts of the kernel
 #
 
-obj-y	 := setup.o irq.o io.o
-
-obj-$(CONFIG_HEARTBEAT)	+= led.o
-
+obj-y	 := setup.o irq.o io.o fdc37c93xapm.o

arch/sh/boards/mach-microdev/fdc37c93xapm.c

@@ -0,0 +1,160 @@
+/*
+ *
+ * Setup for the SMSC FDC37C93xAPM
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004, 2005 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/microdev.h>
+
+#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
+#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)
+
+#define SMSC_ENTER_CONFIG_KEY	 0x55
+#define SMSC_EXIT_CONFIG_KEY	 0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	 0x07	/* Logical Device Number */
+#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
+#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
+#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
+#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
+#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
+#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
+#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
+#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
+#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */
+
+#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
+#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
+#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
+#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
+#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
+#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
+#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */
+
+#define SMSC_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
+#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
+#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
+#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */
+
+#define SERIAL1_PRIMARY_BASE	0x03f8
+#define SERIAL2_PRIMARY_BASE	0x02f8
+
+#define	MSB(x)		( (x) >> 8 )
+#define	LSB(x)		( (x) & 0xff )
+
+	/* General-Purpose base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul
+
+static int __init smsc_superio_setup(void)
+{
+
+	unsigned char devid, devrev;
+
+		/* Initially the chip is in run state */
+		/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+		/* Read device ID info */
+	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+
+	if ((devid == 0x30) && (devrev == 0x01))
+		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
+	else
+		return -ENODEV;
+
+		/* Select the keyboard device */
+	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
+
+		/* Select the Serial #1 device */
+	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the Serial #2 device */
+	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the IDE#1 device */
+	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
+		/* select the interrupt */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the IDE#2 device */
+	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+		/* select the interrupt */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the configuration registers */
+	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
+		/* enable the appropriate GPIO pins for IDE functionality:
+		 * bit[0]   In/Out		1==input;  0==output
+		 * bit[1]   Polarity		1==invert; 0==no invert
+		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
+		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
+		 */
+	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
+	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
+	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
+	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
+	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
+
+		/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+device_initcall(smsc_superio_setup);

arch/sh/boards/mach-microdev/irq.c

@@ -67,27 +67,13 @@ static const struct {
 
 static void enable_microdev_irq(unsigned int irq);
 static void disable_microdev_irq(unsigned int irq);
-
-	/* shutdown is same as "disable" */
-#define shutdown_microdev_irq disable_microdev_irq
-
 static void mask_and_ack_microdev(unsigned int);
-static void end_microdev_irq(unsigned int irq);
-
-static unsigned int startup_microdev_irq(unsigned int irq)
-{
-	enable_microdev_irq(irq);
-	return 0;		/* never anything pending */
-}
 
-static struct hw_interrupt_type microdev_irq_type = {
-	.typename = "MicroDev-IRQ",
-	.startup = startup_microdev_irq,
-	.shutdown = shutdown_microdev_irq,
-	.enable = enable_microdev_irq,
-	.disable = disable_microdev_irq,
+static struct irq_chip microdev_irq_type = {
+	.name = "MicroDev-IRQ",
+	.unmask = enable_microdev_irq,
+	.mask = disable_microdev_irq,
 	.ack = mask_and_ack_microdev,
-	.end = end_microdev_irq
 };
 
 static void disable_microdev_irq(unsigned int irq)
@@ -130,11 +116,11 @@ static void enable_microdev_irq(unsigned int irq)
 	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
 }
 
-	/* This functions sets the desired irq handler to be a MicroDev type */
+/* This function sets the desired irq handler to be a MicroDev type */
 static void __init make_microdev_irq(unsigned int irq)
 {
 	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &microdev_irq_type;
+	set_irq_chip_and_handler(irq, &microdev_irq_type, handle_level_irq);
 	disable_microdev_irq(irq);
 }
 
@@ -143,17 +129,11 @@ static void mask_and_ack_microdev(unsigned int irq)
 	disable_microdev_irq(irq);
 }
 
-static void end_microdev_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_microdev_irq(irq);
-}
-
 extern void __init init_microdev_irq(void)
 {
 	int i;
 
-		/* disable interrupts on the FPGA INTC register */
+	/* disable interrupts on the FPGA INTC register */
 	ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
 
 	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
@@ -179,5 +159,3 @@ extern void microdev_print_fpga_intc_status(void)
 	printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
 	printk("-------------------------------------------------------------------------------\n");
 }
-
-

arch/sh/boards/mach-microdev/led.c

@@ -1,101 +0,0 @@
-/*
- * linux/arch/sh/boards/superh/microdev/led.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- * Copyright (C) 2003 Richard Curnow (Richard.Curnow@superh.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- */
-
-#include <asm/io.h>
-
-#define LED_REGISTER 0xa6104d20
-
-static void mach_led_d9(int value)
-{
-	unsigned long reg;
-	reg = ctrl_inl(LED_REGISTER);
-	reg &= ~1;
-	reg |= (value & 1);
-	ctrl_outl(reg, LED_REGISTER);
-	return;
-}
-
-static void mach_led_d10(int value)
-{
-	unsigned long reg;
-	reg = ctrl_inl(LED_REGISTER);
-	reg &= ~2;
-	reg |= ((value & 1) << 1);
-	ctrl_outl(reg, LED_REGISTER);
-	return;
-}
-
-
-#ifdef CONFIG_HEARTBEAT
-#include <linux/sched.h>
-
-static unsigned char banner_table[] = {
-	0x11, 0x01, 0x11, 0x01, 0x11, 0x03,
-	0x11, 0x01, 0x11, 0x01, 0x13, 0x03,
-	0x11, 0x01, 0x13, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x11, 0x03,
-	0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x11, 0x07,
-	0x13, 0x01, 0x13, 0x03,
-	0x11, 0x01, 0x11, 0x03,
-	0x13, 0x01, 0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x13, 0x01, 0x13, 0x01, 0x13, 0x03,
-	0x13, 0x01, 0x11, 0x01, 0x11, 0x03,
-	0x11, 0x03,
-	0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x13, 0x07,
-	0xff
-};
-
-static void banner(void)
-{
-	static int pos = 0;
-	static int count = 0;
-
-	if (count) {
-		count--;
-	} else {
-		int val = banner_table[pos];
-		if (val == 0xff) {
-			pos = 0;
-			val = banner_table[pos];
-		}
-		pos++;
-		mach_led_d10((val >> 4) & 1);
-		count = 10 * (val & 0xf);
-	}
-}
-
-/* From heartbeat_harp in the stboards directory */
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void microdev_heartbeat(void)
-{
-	static unsigned cnt = 0, period = 0, dist = 0;
-
-	if (cnt == 0 || cnt == dist)
-		mach_led_d9(1);
-	else if (cnt == 7 || cnt == dist+7)
-		mach_led_d9(0);
-
-	if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	}
-
-	banner();
-}
-
-#endif

arch/sh/boards/mach-microdev/setup.c

@@ -17,70 +17,12 @@
 #include <mach/microdev.h>
 #include <asm/io.h>
 #include <asm/machvec.h>
-
-extern void microdev_heartbeat(void);
-
-
-/****************************************************************************/
-
-
-	/*
-	 * Setup for the SMSC FDC37C93xAPM
-	 */
-#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
-#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY	 0x55
-#define SMSC_EXIT_CONFIG_KEY	 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX 	 0x07	/* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
-#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
-#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
-#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	outb((val),   SMSC_DATA_PORT_ADDR); })
-
-#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
-#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
-#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
-#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE	0x03f8
-#define SERIAL2_PRIMARY_BASE	0x02f8
-
-#define	MSB(x)		( (x) >> 8 )
-#define	LSB(x)		( (x) & 0xff )
-
-	/* General-Purpose base address on CPU-board FPGA */
-#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul
-
-	/* assume a Keyboard Controller is present */
-int microdev_kbd_controller_present = 1;
+#include <asm/sizes.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start		= 0x300,
-		.end		= 0x300 + 0x0001000 - 1,
+		.end		= 0x300 + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -97,7 +39,6 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-#ifdef CONFIG_FB_S1D13XXX
 static struct s1d13xxxfb_regval s1d13806_initregs[] = {
 	{ S1DREG_MISC,			0x00 },
 	{ S1DREG_COM_DISP_MODE,		0x00 },
@@ -216,12 +157,12 @@ static struct s1d13xxxfb_pdata s1d13806_platform_data = {
 static struct resource s1d13806_resources[] = {
 	[0] = {
 		.start		= 0x07200000,
-		.end		= 0x07200000 + 0x00200000 - 1,
+		.end		= 0x07200000 + SZ_2M - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start		= 0x07000000,
-		.end		= 0x07000000 + 0x00200000 - 1,
+		.end		= 0x07000000 + SZ_2M - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -236,145 +177,24 @@ static struct platform_device s1d13806_device = {
 		.platform_data	= &s1d13806_platform_data,
 	},
 };
-#endif
 
 static struct platform_device *microdev_devices[] __initdata = {
 	&smc91x_device,
-#ifdef CONFIG_FB_S1D13XXX
 	&s1d13806_device,
-#endif
 };
 
 static int __init microdev_devices_setup(void)
 {
 	return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
 }
-
-/*
- * Setup for the SMSC FDC37C93xAPM
- */
-static int __init smsc_superio_setup(void)
-{
-
-	unsigned char devid, devrev;
-
-		/* Initially the chip is in run state */
-		/* Put it into configuration state */
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-		/* Read device ID info */
-	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
-	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-	if ( (devid==0x30) && (devrev==0x01) )
-	{
-  		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
-	}
-	else
-	{		/* not the device identity we expected */
-		printk("Not detected a SMSC FDC37C93xAPM SuperIO device (devid=0x%02x, rev=0x%02x)\n",
-			devid, devrev);
-			/* inform the keyboard driver that we have no keyboard controller */
-		microdev_kbd_controller_present = 0;
-			/* little point in doing anything else in this functon */
-		return 0;
-	}
-
-		/* Select the keyboard device */
-	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
-		/* Select the Serial #1 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the Serial #2 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#1 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#2 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the configuration registers */
-	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
-		/* enable the appropriate GPIO pins for IDE functionality:
-		 * bit[0]   In/Out		1==input;  0==output
-		 * bit[1]   Polarity		1==invert; 0==no invert
-		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
-		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
-		 */
-	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
-	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
-	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
-	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
-	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
-
-		/* Exit the configuration state */
-	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	return 0;
-}
-
-static void __init microdev_setup(char **cmdline_p)
-{
-	int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
-	const int fpgaRevision = *fpgaRevisionRegister;
-	int * const CacheControlRegister = (int*)CCR;
-
-	device_initcall(microdev_devices_setup);
-	device_initcall(smsc_superio_setup);
-
-	printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
-		get_system_type(), fpgaRevision, *CacheControlRegister);
-}
+device_initcall(microdev_devices_setup);
 
 /*
  * The Machine Vector
  */
 static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_name		= "SH4-202 MicroDev",
-	.mv_setup		= microdev_setup,
-	.mv_nr_irqs		= 72,		/* QQQ need to check this - use the MACRO */
+	.mv_nr_irqs		= 72,
 
 	.mv_inb			= microdev_inb,
 	.mv_inw			= microdev_inw,
@@ -398,8 +218,4 @@ static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_outsl		= microdev_outsl,
 
 	.mv_init_irq		= init_microdev_irq,
-
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= microdev_heartbeat,
-#endif
 };

arch/sh/boards/mach-migor/setup.c

@@ -89,6 +89,7 @@ static struct resource sh_keysc_resources[] = {
 
 static struct platform_device sh_keysc_device = {
 	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
 	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
 	.resource       = sh_keysc_resources,
 	.dev	= {
@@ -261,6 +262,8 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 		.sys_bus_cfg = {
 			.ldmt2r = 0x06000a09,
 			.ldmt3r = 0x180e3418,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
 		},
 	}
 #endif
@@ -273,6 +276,10 @@ static struct resource migor_lcdc_resources[] = {
 		.end	= 0xfe941fff,
 		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device migor_lcdc_device = {
@@ -300,6 +307,7 @@ static void camera_power_on(void)
 	gpio_set_value(GPIO_PTT3, 0);
 	mdelay(10);
 	gpio_set_value(GPIO_PTT3, 1);
+	mdelay(10); /* wait to let chip come out of reset */
 }
 
 static void camera_power_off(void)
@@ -432,6 +440,7 @@ static struct resource migor_ceu_resources[] = {
 
 static struct platform_device migor_ceu_device = {
 	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
 	.num_resources	= ARRAY_SIZE(migor_ceu_resources),
 	.resource	= migor_ceu_resources,
 	.dev	= {
@@ -479,7 +488,6 @@ static int __init migor_devices_setup(void)
 	ctrl_outl(0x00110080, BSC_CS4WCR);
 
 	/* KEYSC */
-	clk_always_enable("mstp214"); /* KEYSC */
 	gpio_request(GPIO_FN_KEYOUT0, NULL);
 	gpio_request(GPIO_FN_KEYOUT1, NULL);
 	gpio_request(GPIO_FN_KEYOUT2, NULL);
@@ -501,7 +509,6 @@ static int __init migor_devices_setup(void)
 	gpio_request(GPIO_FN_IRQ6, NULL);
 
 	/* LCD Panel */
-	clk_always_enable("mstp200"); /* LCDC */
 #ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
 	gpio_request(GPIO_FN_LCDD17, NULL);
 	gpio_request(GPIO_FN_LCDD16, NULL);
@@ -554,7 +561,6 @@ static int __init migor_devices_setup(void)
 #endif
 
 	/* CEU */
-	clk_always_enable("mstp203"); /* CEU */
 	gpio_request(GPIO_FN_VIO_CLK2, NULL);
 	gpio_request(GPIO_FN_VIO_VD2, NULL);
 	gpio_request(GPIO_FN_VIO_HD2, NULL);
@@ -589,12 +595,3 @@ static int __init migor_devices_setup(void)
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
-
-static void __init migor_setup(char **cmdline_p)
-{
-}
-
-static struct sh_machine_vector mv_migor __initmv = {
-	.mv_name		= "Migo-R",
-	.mv_setup		= migor_setup,
-};

arch/sh/boards/mach-rsk/Kconfig

@@ -0,0 +1,18 @@
+if SH_RSK
+
+choice
+	prompt "RSK+ options"
+	default SH_RSK7203
+
+config SH_RSK7201
+	bool "RSK7201"
+	depends on CPU_SUBTYPE_SH7201
+
+config SH_RSK7203
+	bool "RSK7203"
+	select GENERIC_GPIO
+	depends on CPU_SUBTYPE_SH7203
+
+endchoice
+
+endif

arch/sh/boards/mach-rsk/Makefile

@@ -0,0 +1,2 @@
+obj-y				:= setup.o
+obj-$(CONFIG_SH_RSK7203)	+= devices-rsk7203.o

arch/sh/boards/board-rsk7203.c → arch/sh/boards/mach-rsk/devices-rsk7203.c

@@ -50,73 +50,6 @@ static struct platform_device smc911x_device = {
 	},
 };
 
-static const char *probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition *parsed_partitions;
-
-static struct mtd_partition rsk7203_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0x00000000,
-		.size		= 0x00040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= 0x001c0000,
-	}, {
-		.name		= "Flash_FS",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data flash_data = {
-	.width		= 2,
-};
-
-static struct resource flash_resource = {
-	.start		= 0x20000000,
-	.end		= 0x20400000,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &flash_resource,
-	.num_resources	= 1,
-	.dev		= {
-		.platform_data = &flash_data,
-	},
-};
-
-static struct mtd_info *flash_mtd;
-
-static struct map_info rsk7203_flash_map = {
-	.name		= "RSK+ Flash",
-	.size		= 0x400000,
-	.bankwidth	= 2,
-};
-
-static void __init set_mtd_partitions(void)
-{
-	int nr_parts = 0;
-
-	simple_map_init(&rsk7203_flash_map);
-	flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
-	nr_parts = parse_mtd_partitions(flash_mtd, probes,
-					&parsed_partitions, 0);
-	/* If there is no partition table, used the hard coded table */
-	if (nr_parts <= 0) {
-		flash_data.parts = rsk7203_partitions;
-		flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
-	} else {
-		flash_data.nr_parts = nr_parts;
-		flash_data.parts = parsed_partitions;
-	}
-}
-
 static struct gpio_led rsk7203_gpio_leds[] = {
 	{
 		.name			= "green",
@@ -155,7 +88,6 @@ static struct platform_device led_device = {
 
 static struct platform_device *rsk7203_devices[] __initdata = {
 	&smc911x_device,
-	&flash_device,
 	&led_device,
 };
 
@@ -165,15 +97,7 @@ static int __init rsk7203_devices_setup(void)
 	gpio_request(GPIO_FN_TXD0, NULL);
 	gpio_request(GPIO_FN_RXD0, NULL);
 
-	set_mtd_partitions();
 	return platform_add_devices(rsk7203_devices,
 				    ARRAY_SIZE(rsk7203_devices));
 }
 device_initcall(rsk7203_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rsk7203 __initmv = {
-	.mv_name        = "RSK+7203",
-};

arch/sh/boards/mach-rsk/setup.c

@@ -0,0 +1,106 @@
+/*
+ * Renesas Technology Europe RSK+ Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk_flash_map = {
+	.name		= "RSK+ Flash",
+	.size		= 0x400000,
+	.bankwidth	= 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+	int nr_parts = 0;
+
+	simple_map_init(&rsk_flash_map);
+	flash_mtd = do_map_probe("cfi_probe", &rsk_flash_map);
+	nr_parts = parse_mtd_partitions(flash_mtd, probes,
+					&parsed_partitions, 0);
+	/* If there is no partition table, used the hard coded table */
+	if (nr_parts <= 0) {
+		flash_data.parts = rsk_partitions;
+		flash_data.nr_parts = ARRAY_SIZE(rsk_partitions);
+	} else {
+		flash_data.nr_parts = nr_parts;
+		flash_data.parts = parsed_partitions;
+	}
+}
+
+static struct platform_device *rsk_devices[] __initdata = {
+	&flash_device,
+};
+
+static int __init rsk_devices_setup(void)
+{
+	set_mtd_partitions();
+	return platform_add_devices(rsk_devices,
+				    ARRAY_SIZE(rsk_devices));
+}
+device_initcall(rsk_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk __initmv = {
+	.mv_name        = "RSK+",
+};

arch/sh/boards/mach-se/7343/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the 7343 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o

arch/sh/boards/mach-se/7343/io.c

@@ -1,273 +0,0 @@
-/*
- * arch/sh/boards/se/7343/io.c
- *
- * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
- *
- */
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7343.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
-	unsigned long start, end;
-	unsigned long base;
-	struct iop *(*check) (struct iop * p, unsigned long port);
-	unsigned char (*inb) (struct iop * p, unsigned long port);
-	unsigned short (*inw) (struct iop * p, unsigned long port);
-	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
-	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
-	static int count;
-
-	if (count < 100)
-		count++;
-
-	port &= 0xFFFF;
-
-	if ((p->start <= port) && (port <= p->end))
-		return p;
-	else
-		badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
-	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
-		return p;
-	return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
-	return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
-	return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	*(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
-	*(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-	unsigned long v;
-
-	if (port & 1)
-		addr += 0x00400000;
-	v = *(volatile unsigned char *) addr;
-	return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-
-	if (port & 1)
-		addr += 0x00400000;
-	*(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
-	badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
-	.start = 0x00,
-	.end = 0x0F,
-	.base = 0x04000000,
-	.check = simple_check,
-	.inb = simple_inb,
-	.inw = simple_inw,
-	.outb = simple_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_NE2000
-/* NE2000 pc card NIC */
-static struct iop neiop = {
-	.start = 0x280,
-	.end = 0x29f,
-	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
-	.check = simple_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
-	.base = 0xb0600000,
-	.check = ide_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
-	if (0) ;
-#if defined(CONFIG_SMC91X)
-	else if (laniop.check(&laniop, port))
-		return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
-	else if (neiop.check(&neiop, port))
-		return &neiop;
-#endif
-#if defined(CONFIG_IDE)
-	else if (cfiop.check(&cfiop, port))
-		return &cfiop;
-#endif
-	else
-		return NULL;
-}
-
-static inline void
-delay(void)
-{
-	ctrl_inw(0xac000000);
-	ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7343se_inb(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inb) (p, port);
-}
-
-unsigned char
-sh7343se_inb_p(unsigned long port)
-{
-	unsigned char v = sh7343se_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short
-sh7343se_inw(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inw) (p, port);
-}
-
-unsigned int
-sh7343se_inl(unsigned long port)
-{
-	badio(inl, port);
-}
-
-void
-sh7343se_outb(unsigned char value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outb) (p, value, port);
-}
-
-void
-sh7343se_outb_p(unsigned char value, unsigned long port)
-{
-	sh7343se_outb(value, port);
-	delay();
-}
-
-void
-sh7343se_outw(unsigned short value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outw) (p, value, port);
-}
-
-void
-sh7343se_outl(unsigned int value, unsigned long port)
-{
-	badio(outl, port);
-}
-
-void
-sh7343se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inb) (p, port);
-}
-
-void
-sh7343se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned short *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inw) (p, port);
-}
-
-void
-sh7343se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	badio(insl, port);
-}
-
-void
-sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *a = (unsigned char *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outb) (p, *a++, port);
-}
-
-void
-sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned short *a = (unsigned short *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outw) (p, *a++, port);
-}
-
-void
-sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	badio(outsw, port);
-}

arch/sh/boards/mach-se/7343/setup.c

@@ -1,36 +1,16 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/usb/isp116x.h>
+#include <linux/delay.h>
 #include <asm/machvec.h>
 #include <mach-se/mach/se7343.h>
 #include <asm/heartbeat.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x1000000F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/*
-		 * shared with other devices via externel
-		 * interrupt controller in FPGA...
-		 */
-		.start	= SMC_IRQ,
-		.end	= SMC_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start	= PA_LED,
@@ -94,10 +74,83 @@ static struct platform_device nor_flash_device = {
 	.resource	= nor_flash_resources,
 };
 
+#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x16000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.irq		= UARTA_IRQ,
+		.uartclk	= 7372800,
+	},
+	[1] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x17000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.irq		= UARTB_IRQ,
+		.uartclk	= 7372800,
+	},
+	{ },
+};
+
+static struct platform_device uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static void isp116x_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start  = 0x11800000,
+		.end    = 0x11800001,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0x11800002,
+		.end    = 0x11800003,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = USB_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp116x_platform_data usb_platform_data = {
+	.sel15Kres		= 1,
+	.oc_enable		= 1,
+	.int_act_high		= 0,
+	.int_edge_triggered	= 0,
+	.remote_wakeup_enable	= 0,
+	.delay			= isp116x_delay,
+};
+
+static struct platform_device usb_device = {
+	.name			= "isp116x-hcd",
+	.id			= -1,
+	.num_resources  	= ARRAY_SIZE(usb_resources),
+	.resource       	= usb_resources,
+	.dev			= {
+		.platform_data	= &usb_platform_data,
+	},
+
+};
+
 static struct platform_device *sh7343se_platform_devices[] __initdata = {
-	&smc91x_device,
 	&heartbeat_device,
 	&nor_flash_device,
+	&uart_device,
+	&usb_device,
 };
 
 static int __init sh7343se_devices_setup(void)
@@ -126,27 +179,6 @@ static void __init sh7343se_setup(char **cmdline_p)
 static struct sh_machine_vector mv_7343se __initmv = {
 	.mv_name = "SolutionEngine 7343",
 	.mv_setup = sh7343se_setup,
-	.mv_nr_irqs = 108,
-	.mv_inb = sh7343se_inb,
-	.mv_inw = sh7343se_inw,
-	.mv_inl = sh7343se_inl,
-	.mv_outb = sh7343se_outb,
-	.mv_outw = sh7343se_outw,
-	.mv_outl = sh7343se_outl,
-
-	.mv_inb_p = sh7343se_inb_p,
-	.mv_inw_p = sh7343se_inw,
-	.mv_inl_p = sh7343se_inl,
-	.mv_outb_p = sh7343se_outb_p,
-	.mv_outw_p = sh7343se_outw,
-	.mv_outl_p = sh7343se_outl,
-
-	.mv_insb = sh7343se_insb,
-	.mv_insw = sh7343se_insw,
-	.mv_insl = sh7343se_insl,
-	.mv_outsb = sh7343se_outsb,
-	.mv_outsw = sh7343se_outsw,
-	.mv_outsl = sh7343se_outsl,
-
+	.mv_nr_irqs = SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_NR,
 	.mv_init_irq = init_7343se_IRQ,
 };

arch/sh/boards/mach-se/770x/setup.c

@@ -8,8 +8,9 @@
  */
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <asm/machvec.h>
 #include <mach-se/mach/se.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/smc37c93x.h>
 #include <asm/heartbeat.h>
@@ -175,6 +176,7 @@ static struct platform_device *se_devices[] __initdata = {
 
 static int __init se_devices_setup(void)
 {
+	mrshpc_setup_windows();
 	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
 }
 device_initcall(se_devices_setup);

arch/sh/boards/mach-se/7721/setup.c

@@ -12,8 +12,9 @@
  */
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <asm/machvec.h>
 #include <mach-se/mach/se7721.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 
@@ -74,8 +75,8 @@ static struct platform_device *se7721_devices[] __initdata = {
 
 static int __init se7721_devices_setup(void)
 {
-	return platform_add_devices(se7721_devices,
-		ARRAY_SIZE(se7721_devices));
+	mrshpc_setup_windows();
+	return platform_add_devices(se7721_devices, ARRAY_SIZE(se7721_devices));
 }
 device_initcall(se7721_devices_setup);
 

arch/sh/boards/mach-se/7722/setup.c

@@ -15,9 +15,10 @@
 #include <linux/ata_platform.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
+#include <mach-se/mach/se7722.h>
+#include <mach-se/mach/mrshpc.h>
 #include <asm/machvec.h>
 #include <asm/clock.h>
-#include <mach-se/mach/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_keysc.h>
@@ -130,6 +131,7 @@ static struct resource sh_keysc_resources[] = {
 
 static struct platform_device sh_keysc_device = {
 	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
 	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
 	.resource       = sh_keysc_resources,
 	.dev	= {
@@ -146,10 +148,8 @@ static struct platform_device *se7722_devices[] __initdata = {
 
 static int __init se7722_devices_setup(void)
 {
-	clk_always_enable("mstp214"); /* KEYSC */
-
-	return platform_add_devices(se7722_devices,
-		ARRAY_SIZE(se7722_devices));
+	mrshpc_setup_windows();
+	return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
 }
 device_initcall(se7722_devices_setup);
 

arch/sh/boards/mach-sh03/setup.c

@@ -9,6 +9,7 @@
 #include <linux/irq.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
+#include <linux/ata_platform.h>
 #include <asm/io.h>
 #include <asm/rtc.h>
 #include <mach-sh03/mach/io.h>
@@ -20,19 +21,6 @@ static void __init init_sh03_IRQ(void)
 	plat_irq_setup_pins(IRQ_MODE_IRQ);
 }
 
-extern void *cf_io_base;
-
-static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
-{
-	if (PXSEG(port))
-		return (void __iomem *)port;
-	/* CompactFlash (IDE) */
-	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
-		return (void __iomem *)((unsigned long)cf_io_base + port);
-
-        return (void __iomem *)(port + PCI_IO_BASE);
-}
-
 /* arch/sh/boards/sh03/rtc.c */
 void sh03_time_init(void);
 
@@ -41,6 +29,30 @@ static void __init sh03_setup(char **cmdline_p)
 	board_time_init = sh03_time_init;
 }
 
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = 0x1f0,
+		.end    = 0x1f0 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = 0x1f0 + 0x206,
+		.end    = 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = IRL2_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start	= 0xa0800000,
@@ -58,10 +70,30 @@ static struct platform_device heartbeat_device = {
 
 static struct platform_device *sh03_devices[] __initdata = {
 	&heartbeat_device,
+	&cf_ide_device,
 };
 
 static int __init sh03_devices_setup(void)
 {
+	pgprot_t prot;
+	unsigned long paddrbase;
+	void *cf_ide_base;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+	if (!cf_ide_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start += (unsigned long)cf_ide_base;
+	cf_ide_resources[0].end   += (unsigned long)cf_ide_base;
+	cf_ide_resources[1].start += (unsigned long)cf_ide_base;
+	cf_ide_resources[1].end   += (unsigned long)cf_ide_base;
+
 	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
 }
 __initcall(sh03_devices_setup);
@@ -70,6 +102,5 @@ static struct sh_machine_vector mv_sh03 __initmv = {
 	.mv_name		= "Interface (CTP/PCI-SH03)",
 	.mv_setup		= sh03_setup,
 	.mv_nr_irqs		= 48,
-	.mv_ioport_map		= sh03_ioport_map,
 	.mv_init_irq		= init_sh03_IRQ,
 };

arch/sh/boards/mach-systemh/irq.c

@@ -12,8 +12,8 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <mach/systemh7751.h>
 #include <asm/smc37c93x.h>
 
@@ -24,35 +24,17 @@ static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
 static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
 
 /* forward declaration */
-static unsigned int startup_systemh_irq(unsigned int irq);
-static void shutdown_systemh_irq(unsigned int irq);
 static void enable_systemh_irq(unsigned int irq);
 static void disable_systemh_irq(unsigned int irq);
 static void mask_and_ack_systemh(unsigned int);
-static void end_systemh_irq(unsigned int irq);
 
-/* hw_interrupt_type */
-static struct hw_interrupt_type systemh_irq_type = {
-	.typename = " SystemH Register",
-	.startup = startup_systemh_irq,
-	.shutdown = shutdown_systemh_irq,
-	.enable = enable_systemh_irq,
-	.disable = disable_systemh_irq,
+static struct irq_chip systemh_irq_type = {
+	.name = " SystemH Register",
+	.unmask = enable_systemh_irq,
+	.mask = disable_systemh_irq,
 	.ack = mask_and_ack_systemh,
-	.end = end_systemh_irq
 };
 
-static unsigned int startup_systemh_irq(unsigned int irq)
-{
-	enable_systemh_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_systemh_irq(unsigned int irq)
-{
-	disable_systemh_irq(irq);
-}
-
 static void disable_systemh_irq(unsigned int irq)
 {
 	if (systemh_irq_mask_register) {
@@ -86,16 +68,9 @@ static void mask_and_ack_systemh(unsigned int irq)
 	disable_systemh_irq(irq);
 }
 
-static void end_systemh_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_systemh_irq(irq);
-}
-
 void make_systemh_irq(unsigned int irq)
 {
 	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &systemh_irq_type;
+	set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq);
 	disable_systemh_irq(irq);
 }
-

arch/sh/cchips/hd6446x/hd64461.c

@@ -10,99 +10,49 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/irq.h>
 #include <asm/hd64461.h>
 
 /* This belongs in cpu specific */
 #define INTC_ICR1 0xA4140010UL
 
-static void disable_hd64461_irq(unsigned int irq)
+static void hd64461_mask_irq(unsigned int irq)
 {
 	unsigned short nimr;
 	unsigned short mask = 1 << (irq - HD64461_IRQBASE);
 
-	nimr = inw(HD64461_NIMR);
+	nimr = __raw_readw(HD64461_NIMR);
 	nimr |= mask;
-	outw(nimr, HD64461_NIMR);
+	__raw_writew(nimr, HD64461_NIMR);
 }
 
-static void enable_hd64461_irq(unsigned int irq)
+static void hd64461_unmask_irq(unsigned int irq)
 {
 	unsigned short nimr;
 	unsigned short mask = 1 << (irq - HD64461_IRQBASE);
 
-	nimr = inw(HD64461_NIMR);
+	nimr = __raw_readw(HD64461_NIMR);
 	nimr &= ~mask;
-	outw(nimr, HD64461_NIMR);
+	__raw_writew(nimr, HD64461_NIMR);
 }
 
-static void mask_and_ack_hd64461(unsigned int irq)
+static void hd64461_mask_and_ack_irq(unsigned int irq)
 {
-	disable_hd64461_irq(irq);
+	hd64461_mask_irq(irq);
 #ifdef CONFIG_HD64461_ENABLER
 	if (irq == HD64461_IRQBASE + 13)
-		outb(0x00, HD64461_PCC1CSCR);
+		__raw_writeb(0x00, HD64461_PCC1CSCR);
 #endif
 }
 
-static void end_hd64461_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_hd64461_irq(irq);
-}
-
-static unsigned int startup_hd64461_irq(unsigned int irq)
-{
-	enable_hd64461_irq(irq);
-	return 0;
-}
-
-static void shutdown_hd64461_irq(unsigned int irq)
-{
-	disable_hd64461_irq(irq);
-}
-
-static struct hw_interrupt_type hd64461_irq_type = {
-	.typename	= "HD64461-IRQ",
-	.startup	= startup_hd64461_irq,
-	.shutdown	= shutdown_hd64461_irq,
-	.enable		= enable_hd64461_irq,
-	.disable	= disable_hd64461_irq,
-	.ack		= mask_and_ack_hd64461,
-	.end		= end_hd64461_irq,
+static struct irq_chip hd64461_irq_chip = {
+	.name		= "HD64461-IRQ",
+	.mask		= hd64461_mask_irq,
+	.mask_ack	= hd64461_mask_and_ack_irq,
+	.unmask		= hd64461_unmask_irq,
 };
 
-static irqreturn_t hd64461_interrupt(int irq, void *dev_id)
-{
-	printk(KERN_INFO
-	       "HD64461: spurious interrupt, nirr: 0x%x nimr: 0x%x\n",
-	       inw(HD64461_NIRR), inw(HD64461_NIMR));
-
-	return IRQ_NONE;
-}
-
-static struct {
-	int (*func) (int, void *);
-	void *dev;
-} hd64461_demux[HD64461_IRQ_NUM];
-
-void hd64461_register_irq_demux(int irq,
-				int (*demux) (int irq, void *dev), void *dev)
-{
-	hd64461_demux[irq - HD64461_IRQBASE].func = demux;
-	hd64461_demux[irq - HD64461_IRQBASE].dev = dev;
-}
-
-EXPORT_SYMBOL(hd64461_register_irq_demux);
-
-void hd64461_unregister_irq_demux(int irq)
-{
-	hd64461_demux[irq - HD64461_IRQBASE].func = 0;
-}
-
-EXPORT_SYMBOL(hd64461_unregister_irq_demux);
-
 int hd64461_irq_demux(int irq)
 {
 	if (irq == CONFIG_HD64461_IRQ) {
@@ -115,25 +65,11 @@ int hd64461_irq_demux(int irq)
 		for (bit = 1, i = 0; i < 16; bit <<= 1, i++)
 			if (nirr & bit)
 				break;
-		if (i == 16)
-			irq = CONFIG_HD64461_IRQ;
-		else {
-			irq = HD64461_IRQBASE + i;
-			if (hd64461_demux[i].func != 0) {
-				irq = hd64461_demux[i].func(irq, hd64461_demux[i].dev);
-			}
-		}
+		irq = HD64461_IRQBASE + i;
 	}
 	return irq;
 }
 
-static struct irqaction irq0 = {
-	.handler = hd64461_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "HD64461",
-};
-
 int __init setup_hd64461(void)
 {
 	int i;
@@ -146,22 +82,21 @@ int __init setup_hd64461(void)
 	       CONFIG_HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
 	       HD64461_IRQBASE + 15);
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7709)	/* Should be at processor specific part.. */
-	outw(0x2240, INTC_ICR1);
+/* Should be at processor specific part.. */
+#if defined(CONFIG_CPU_SUBTYPE_SH7709)
+	__raw_writew(0x2240, INTC_ICR1);
 #endif
-	outw(0xffff, HD64461_NIMR);
+	__raw_writew(0xffff, HD64461_NIMR);
 
 	/*  IRQ 80 -> 95 belongs to HD64461  */
-	for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) {
-		irq_desc[i].chip = &hd64461_irq_type;
-	}
-
-	setup_irq(CONFIG_HD64461_IRQ, &irq0);
+	for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++)
+		set_irq_chip_and_handler(i, &hd64461_irq_chip,
+					 handle_level_irq);
 
 #ifdef CONFIG_HD64461_ENABLER
 	printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
-	outb(0x4c, HD64461_PCC1CSCIER);
-	outb(0x00, HD64461_PCC1CSCR);
+	__raw_writeb(0x4c, HD64461_PCC1CSCIER);
+	__raw_writeb(0x00, HD64461_PCC1CSCR);
 #endif
 
 	return 0;

arch/sh/configs/edosk7705_defconfig

@@ -0,0 +1,438 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc6
+# Wed Dec 17 13:53:02 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_PRINTK is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+# CONFIG_BLOCK is not set
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+CONFIG_CPU_SUBTYPE_SH7705=y
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+CONFIG_SH7705_CACHE_32KB=y
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_ADC=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Board support
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+CONFIG_SH_EDOSK7705=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=31250000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_SH_SCI is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# File systems
+#
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Pseudo filesystems
+#
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/sh/configs/rsk7201_defconfig

@@ -0,0 +1,703 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc6
+# Mon Dec  8 14:48:02 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_AIO is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH2=y
+CONFIG_CPU_SH2A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+CONFIG_CPU_SUBTYPE_SH7201=y
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_RSK=y
+CONFIG_SH_RSK7201=y
+# CONFIG_SH_RSK7203 is not set
+
+#
+# Timer and clock configuration
+#
+# CONFIG_SH_CMT is not set
+CONFIG_SH_MTU2=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=40000000
+CONFIG_SH_CLK_MD=0
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/sh/configs/rsk7203_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 12:58:47 2008
+# Linux kernel version: 2.6.28-rc6
+# Mon Dec  8 14:35:03 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -75,7 +77,6 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
@@ -126,6 +127,7 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SH2A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 CONFIG_CPU_SUBTYPE_SH7203=y
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -211,6 +213,8 @@ CONFIG_CPU_HAS_FPU=y
 #
 # Board support
 #
+CONFIG_SH_RSK=y
+# CONFIG_SH_RSK7201 is not set
 CONFIG_SH_RSK7203=y
 
 #
@@ -296,6 +300,14 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_NET=y
 
 #
@@ -477,6 +489,7 @@ CONFIG_BLK_DEV=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -603,11 +616,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -617,7 +630,11 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -702,19 +719,22 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -725,11 +745,11 @@ CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -770,7 +790,22 @@ CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -812,6 +847,7 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -950,9 +986,14 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set

arch/sh/configs/rts7751r2dplus_qemu_defconfig

@@ -1,949 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:51:20 2008
-#
-CONFIG_SUPERH=y
-CONFIG_SUPERH32=y
-CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_SYS_SUPPORTS_PCI=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_IO_TRAPPED=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System type
-#
-CONFIG_CPU_SH4=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
-
-#
-# Memory management options
-#
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_29BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_UNEVICTABLE_LRU=y
-
-#
-# Cache configuration
-#
-# CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_CACHE_WRITEBACK=y
-# CONFIG_CACHE_WRITETHROUGH is not set
-# CONFIG_CACHE_OFF is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
-CONFIG_CPU_HAS_FPU=y
-
-#
-# Board support
-#
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-CONFIG_SH_RTS7751R2D=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_LBOX_RE2 is not set
-
-#
-# RTS7751R2D Board Revision
-#
-CONFIG_RTS7751R2D_PLUS=y
-# CONFIG_RTS7751R2D_1 is not set
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TMU=y
-CONFIG_SH_TIMER_IRQ=16
-CONFIG_SH_PCLK_FREQ=60000000
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-
-#
-# Additional SuperH Device Drivers
-#
-CONFIG_HEARTBEAT=y
-# CONFIG_PUSH_SWITCH is not set
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_GUSA=y
-# CONFIG_GUSA_RB is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00010000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_SH_SCI is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-CONFIG_MFD_SM501=y
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_LOGO_SUPERH_CLUT224=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_SUPERH=y
-# CONFIG_SND_SOC is not set
-CONFIG_SOUND_PRIME=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-CONFIG_RTC_DRV_R9701=y
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
-CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y

arch/sh/configs/se7343_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:00:21 2008
+# Linux kernel version: 2.6.28-rc6
+# Thu Dec  4 16:40:25 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -74,7 +74,6 @@ CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -127,6 +126,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -227,7 +227,7 @@ CONFIG_SH_7343_SOLUTION_ENGINE=y
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
-CONFIG_SH_PCLK_FREQ=27000000
+CONFIG_SH_PCLK_FREQ=33333333
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -274,7 +274,8 @@ CONFIG_GUSA=y
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200"
 
 #
 # Bus options
@@ -463,6 +464,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -519,23 +521,10 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_ETHERNET is not set
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_STNIC is not set
-CONFIG_SMC91X=y
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -543,6 +532,26 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_DM9601=y
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -597,13 +606,17 @@ CONFIG_DEVKMEM=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -615,7 +628,51 @@ CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
@@ -623,11 +680,11 @@ CONFIG_HW_RANDOM=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -637,7 +694,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -657,6 +717,16 @@ CONFIG_VIDEO_MEDIA=y
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
 CONFIG_VIDEO_V4L2=y
 CONFIG_VIDEO_V4L1=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
@@ -665,8 +735,57 @@ CONFIG_VIDEO_CAPTURE_DRIVERS=y
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
 # CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
 CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
 # CONFIG_DAB is not set
 
 #
@@ -700,6 +819,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -737,27 +857,147 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
 # CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
 # Special HID drivers
 #
 CONFIG_HID_COMPAT=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_ISP116X_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
 # CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -889,8 +1129,13 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set

arch/sh/drivers/dma/Makefile

@@ -3,7 +3,6 @@
 #
 
 obj-$(CONFIG_SH_DMA_API)	+= dma-api.o dma-sysfs.o
-obj-$(CONFIG_ISA_DMA_API)	+= dma-isa.o
 obj-$(CONFIG_SH_DMA)		+= dma-sh.o
 obj-$(CONFIG_SH_DREAMCAST)	+= dma-pvr2.o dma-g2.o
 obj-$(CONFIG_SH_DMABRG)		+= dmabrg.o

arch/sh/drivers/dma/dma-isa.c

@@ -1,106 +0,0 @@
-/*
- * arch/sh/drivers/dma/dma-isa.c
- *
- * Generic ISA DMA wrapper for SH DMA API
- *
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/dma.h>
-
-/*
- * This implements a small wrapper set to make code using the old ISA DMA API
- * work with the SH DMA API. Since most of the work in the new API happens
- * at ops->xfer() time, we simply use the various set_dma_xxx() routines to
- * fill in per-channel info, and then hand hand this off to ops->xfer() at
- * enable_dma() time.
- *
- * For channels that are doing on-demand data transfer via cascading, the
- * channel itself will still need to be configured through the new API. As
- * such, this code is meant for only the simplest of tasks (and shouldn't be
- * used in any new drivers at all).
- *
- * NOTE: ops->xfer() is the preferred way of doing things. However, there
- * are some users of the ISA DMA API that exist in common code that we
- * don't necessarily want to go out of our way to break, so we still
- * allow for some compatibility at that level. Any new code is strongly
- * advised to run far away from the ISA DMA API and use the SH DMA API
- * directly.
- */
-unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dma_spin_lock, flags);
-
-	return flags;
-}
-EXPORT_SYMBOL(claim_dma_lock);
-
-void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-EXPORT_SYMBOL(release_dma_lock);
-
-void disable_dma(unsigned int chan)
-{
-	/* Nothing */
-}
-EXPORT_SYMBOL(disable_dma);
-
-void enable_dma(unsigned int chan)
-{
-	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
-
-	info->ops->xfer(channel);
-}
-EXPORT_SYMBOL(enable_dma);
-
-void clear_dma_ff(unsigned int chan)
-{
-	/* Nothing */
-}
-EXPORT_SYMBOL(clear_dma_ff);
-
-void set_dma_mode(unsigned int chan, char mode)
-{
-	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
-
-	channel->mode = mode;
-}
-EXPORT_SYMBOL(set_dma_mode);
-
-void set_dma_addr(unsigned int chan, unsigned int addr)
-{
-	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
-
-	/*
-	 * Single address mode is the only thing supported through
-	 * this interface.
-	 */
-	if ((channel->mode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		channel->sar = addr;
-	} else {
-		channel->dar = addr;
-	}
-}
-EXPORT_SYMBOL(set_dma_addr);
-
-void set_dma_count(unsigned int chan, unsigned int count)
-{
-	struct dma_info *info = get_dma_info(chan);
-	struct dma_channel *channel = &info->channels[chan];
-
-	channel->count = count;
-}
-EXPORT_SYMBOL(set_dma_count);
-

arch/sh/drivers/dma/dma-sh.c

@@ -205,7 +205,8 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan)
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7780)
+    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709)
 #define dmaor_read_reg()	ctrl_inw(DMAOR)
 #define dmaor_write_reg(data)	ctrl_outw(data, DMAOR)
 #else

arch/sh/drivers/dma/dma-sh.h

@@ -29,6 +29,7 @@
 #define RS_IN	0x00000200
 #define RS_OUT	0x00000300
 #define TS_BLK	0x00000040
+#define TM_BUR	0x00000020
 #define CHCR_DE 0x00000001
 #define CHCR_TE 0x00000002
 #define CHCR_IE 0x00000004

arch/sh/drivers/pci/ops-sh03.c

@@ -18,7 +18,8 @@
  */
 int __init pcibios_init_platform(void)
 {
-   return 1;
+	__set_io_port_base(SH7751_PCI_IO_BASE);
+	return 1;
 }
 
 static struct resource sh7751_io_resource = {

arch/sh/drivers/pci/pci-sh7780.c

@@ -123,16 +123,14 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
 	 * Window0 = map->window0.size @ non-cached area base = SDRAM
 	 * Window1 = map->window1.size @ cached area base = SDRAM
 	 */
-	word = ((map->window0.size - 1) & 0x1ff00001) | 0x01;
-	pci_write_reg(0x07f00001, SH4_PCILSR0);
-	word = ((map->window1.size - 1) & 0x1ff00001) | 0x01;
+	word = (CONFIG_MEMORY_SIZE - 0x00100000) | 0x00000001;
+	pci_write_reg(word, SH4_PCILSR0);
 	pci_write_reg(0x00000001, SH4_PCILSR1);
 	/* Set the values on window 0 PCI config registers */
-	word = P2SEGADDR(map->window0.base);
-	pci_write_reg(0xa8000000, SH4_PCILAR0);
-	pci_write_reg(0x08000000, SH7780_PCIMBAR0);
+	word = (CONFIG_MEMORY_SIZE > 0x08000000) ? 0x10000000 : 0x08000000;
+	pci_write_reg(word | 0xa0000000, SH4_PCILAR0);
+	pci_write_reg(word, SH7780_PCIMBAR0);
 	/* Set the values on window 1 PCI config registers */
-	word = P2SEGADDR(map->window1.base);
 	pci_write_reg(0x00000000, SH4_PCILAR1);
 	pci_write_reg(0x00000000, SH7780_PCIMBAR1);
 

arch/sh/include/asm/addrspace.h

@@ -49,5 +49,16 @@
 /* Check if an address can be reached in 29 bits */
 #define IS_29BIT(a)	(((unsigned long)(a)) < 0x20000000)
 
+#ifdef CONFIG_SH_STORE_QUEUES
+/*
+ * This is a special case for the SH-4 store queues, as pages for this
+ * space still need to be faulted in before it's possible to flush the
+ * store queue cache for writeout to the remapped region.
+ */
+#define P3_ADDR_MAX		(P4SEG_STORE_QUE + 0x04000000)
+#else
+#define P3_ADDR_MAX		P4SEG
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_ADDRSPACE_H */

arch/sh/include/asm/bitops-grb.h

@@ -166,4 +166,7 @@ static inline int test_and_change_bit(int nr, volatile void * addr)
 
         return retval;
 }
+
+#include <asm-generic/bitops/non-atomic.h>
+
 #endif /* __ASM_SH_BITOPS_GRB_H */

arch/sh/include/asm/bitops-irq.h

@@ -1,91 +0,0 @@
-#ifndef __ASM_SH_BITOPS_IRQ_H
-#define __ASM_SH_BITOPS_IRQ_H
-
-static inline void set_bit(int nr, volatile void *addr)
-{
-	int	mask;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	*a |= mask;
-	local_irq_restore(flags);
-}
-
-static inline void clear_bit(int nr, volatile void *addr)
-{
-	int	mask;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	*a &= ~mask;
-	local_irq_restore(flags);
-}
-
-static inline void change_bit(int nr, volatile void *addr)
-{
-	int	mask;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	*a ^= mask;
-	local_irq_restore(flags);
-}
-
-static inline int test_and_set_bit(int nr, volatile void *addr)
-{
-	int	mask, retval;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	retval = (mask & *a) != 0;
-	*a |= mask;
-	local_irq_restore(flags);
-
-	return retval;
-}
-
-static inline int test_and_clear_bit(int nr, volatile void *addr)
-{
-	int	mask, retval;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	retval = (mask & *a) != 0;
-	*a &= ~mask;
-	local_irq_restore(flags);
-
-	return retval;
-}
-
-static inline int test_and_change_bit(int nr, volatile void *addr)
-{
-	int	mask, retval;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	retval = (mask & *a) != 0;
-	*a ^= mask;
-	local_irq_restore(flags);
-
-	return retval;
-}
-
-#endif /* __ASM_SH_BITOPS_IRQ_H */

arch/sh/include/asm/bitops-llsc.h

@@ -141,4 +141,6 @@ static inline int test_and_change_bit(int nr, volatile void * addr)
 	return retval != 0;
 }
 
+#include <asm-generic/bitops/non-atomic.h>
+
 #endif /* __ASM_SH_BITOPS_LLSC_H */

arch/sh/include/asm/bitops-op32.h

@@ -0,0 +1,142 @@
+#ifndef __ASM_SH_BITOPS_OP32_H
+#define __ASM_SH_BITOPS_OP32_H
+
+/*
+ * The bit modifying instructions on SH-2A are only capable of working
+ * with a 3-bit immediate, which signifies the shift position for the bit
+ * being worked on.
+ */
+#if defined(__BIG_ENDIAN)
+#define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
+#define BYTE_NUMBER(nr)		((nr ^ BITOP_LE_SWIZZLE) / BITS_PER_BYTE)
+#define BYTE_OFFSET(nr)		((nr ^ BITOP_LE_SWIZZLE) % BITS_PER_BYTE)
+#else
+#define BYTE_NUMBER(nr)		((nr) / BITS_PER_BYTE)
+#define BYTE_OFFSET(nr)		((nr) % BITS_PER_BYTE)
+#endif
+
+#define IS_IMMEDIATE(nr)	(__builtin_constant_p(nr))
+
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		__asm__ __volatile__ (
+			"bset.b %1, @(%O2,%0)		! __set_bit\n\t"
+			: "+r" (addr)
+			: "i" (BYTE_OFFSET(nr)), "i" (BYTE_NUMBER(nr))
+			: "t", "memory"
+		);
+	} else {
+		unsigned long mask = BIT_MASK(nr);
+		unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+		*p |= mask;
+	}
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		__asm__ __volatile__ (
+			"bclr.b %1, @(%O2,%0)		! __clear_bit\n\t"
+			: "+r" (addr)
+			: "i" (BYTE_OFFSET(nr)),
+			  "i" (BYTE_NUMBER(nr))
+			: "t", "memory"
+		);
+	} else {
+		unsigned long mask = BIT_MASK(nr);
+		unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+		*p &= ~mask;
+	}
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		__asm__ __volatile__ (
+			"bxor.b %1, @(%O2,%0)		! __change_bit\n\t"
+			: "+r" (addr)
+			: "i" (BYTE_OFFSET(nr)),
+			  "i" (BYTE_NUMBER(nr))
+			: "t", "memory"
+		);
+	} else {
+		unsigned long mask = BIT_MASK(nr);
+		unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+		*p ^= mask;
+	}
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old | mask;
+	return (old & mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old & ~mask;
+	return (old & mask) != 0;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static inline int __test_and_change_bit(int nr,
+					    volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old ^ mask;
+	return (old & mask) != 0;
+}
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline int test_bit(int nr, const volatile unsigned long *addr)
+{
+	return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
+}
+
+#endif /* __ASM_SH_BITOPS_OP32_H */

arch/sh/include/asm/bitops.h

@@ -13,21 +13,22 @@
 
 #ifdef CONFIG_GUSA_RB
 #include <asm/bitops-grb.h>
+#elif defined(CONFIG_CPU_SH2A)
+#include <asm-generic/bitops/atomic.h>
+#include <asm/bitops-op32.h>
 #elif defined(CONFIG_CPU_SH4A)
 #include <asm/bitops-llsc.h>
 #else
-#include <asm/bitops-irq.h>
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
 #endif
 
-
 /*
  * clear_bit() doesn't provide any barrier for the compiler.
  */
 #define smp_mb__before_clear_bit()	barrier()
 #define smp_mb__after_clear_bit()	barrier()
 
-#include <asm-generic/bitops/non-atomic.h>
-
 #ifdef CONFIG_SUPERH32
 static inline unsigned long ffz(unsigned long word)
 {

arch/sh/include/asm/bugs.h

@@ -25,7 +25,7 @@ static void __init check_bugs(void)
 	case CPU_SH7619:
 		*p++ = '2';
 		break;
-	case CPU_SH7203 ... CPU_MXG:
+	case CPU_SH7201 ... CPU_MXG:
 		*p++ = '2';
 		*p++ = 'a';
 		break;

arch/sh/include/asm/elf.h

@@ -108,13 +108,11 @@ typedef struct user_fpu_struct elf_fpregset_t;
 #define elf_check_fdpic(x)		((x)->e_flags & EF_SH_FDPIC)
 #define elf_check_const_displacement(x)	((x)->e_flags & EF_SH_PIC)
 
-#ifdef CONFIG_SUPERH32
 /*
  * Enable dump using regset.
  * This covers all of general/DSP/FPU regs.
  */
 #define CORE_DUMP_USE_REGSET
-#endif
 
 #define USE_ELF_CORE_DUMP
 #define ELF_FDPIC_CORE_EFLAGS	EF_SH_FDPIC

arch/sh/include/asm/ftrace.h

@@ -1,8 +1,34 @@
 #ifndef __ASM_SH_FTRACE_H
 #define __ASM_SH_FTRACE_H
 
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+
 #ifndef __ASSEMBLY__
 extern void mcount(void);
-#endif
+
+#define MCOUNT_ADDR		((long)(mcount))
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+#define CALLER_ADDR		((long)(ftrace_caller))
+#define STUB_ADDR		((long)(ftrace_stub))
+
+#define MCOUNT_INSN_OFFSET	((STUB_ADDR - CALLER_ADDR) >> 1)
+
+struct dyn_arch_ftrace {
+	/* No extra data needed on sh */
+};
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	/* 'addr' is the memory table address. */
+	return addr;
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_FUNCTION_TRACER */
 
 #endif /* __ASM_SH_FTRACE_H */

arch/sh/include/asm/io.h

@@ -260,6 +260,10 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 
 		return (void __iomem *)P2SEGADDR(offset);
 	}
+
+	/* P4 above the store queues are always mapped. */
+	if (unlikely(offset >= P3_ADDR_MAX))
+		return (void __iomem *)P4SEGADDR(offset);
 #endif
 
 	return __ioremap(offset, size, flags);

arch/sh/include/asm/kgdb.h

@@ -1,21 +1,7 @@
-/*
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on original code by Glenn Engel, Jim Kingdon,
- * David Grothe <dave@gcom.com>, Tigran Aivazian, <tigran@sco.com> and
- * Amit S. Kale <akale@veritas.com>
- * 
- * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by
- * Henry Bell <henry.bell@st.com>
- * 
- * Header file for low-level support for remote debug using GDB. 
- *
- */
-
-#ifndef __KGDB_H
-#define __KGDB_H
+#ifndef __ASM_SH_KGDB_H
+#define __ASM_SH_KGDB_H
 
+#include <asm/cacheflush.h>
 #include <asm/ptrace.h>
 
 /* Same as pt_regs but has vbr in place of syscall_nr */
@@ -30,40 +16,26 @@ struct kgdb_regs {
         unsigned long vbr;
 };
 
-/* State info */
-extern char kgdb_in_gdb_mode;
-extern int kgdb_nofault;	/* Ignore bus errors (in gdb mem access) */
-extern char in_nmi;		/* Debounce flag to prevent NMI reentry*/
+enum regnames {
+	GDB_R0, GDB_R1, GDB_R2, GDB_R3, GDB_R4, GDB_R5, GDB_R6, GDB_R7,
+	GDB_R8, GDB_R9, GDB_R10, GDB_R11, GDB_R12, GDB_R13, GDB_R14, GDB_R15,
 
-/* SCI */
-extern int kgdb_portnum;
-extern int kgdb_baud;
-extern char kgdb_parity;
-extern char kgdb_bits;
+	GDB_PC, GDB_PR, GDB_SR, GDB_GBR, GDB_MACH, GDB_MACL, GDB_VBR,
+};
 
-/* Init and interface stuff */
-extern int kgdb_init(void);
-extern int (*kgdb_getchar)(void);
-extern void (*kgdb_putchar)(int);
+#define NUMREGBYTES    ((GDB_VBR + 1) * 4)
 
-/* Trap functions */
-typedef void (kgdb_debug_hook_t)(struct pt_regs *regs);
-typedef void (kgdb_bus_error_hook_t)(void);
-extern kgdb_debug_hook_t  *kgdb_debug_hook;
-extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
+static inline void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__ ("trapa #0x3c\n");
+}
 
-/* Console */
-struct console;
-void kgdb_console_write(struct console *co, const char *s, unsigned count);
-extern int kgdb_console_setup(struct console *, char *);
+/* State info */
+extern char in_nmi;		/* Debounce flag to prevent NMI reentry*/
 
-/* Prototypes for jmp fns */
-#define _JBLEN 9
-typedef        int jmp_buf[_JBLEN];
-extern void    longjmp(jmp_buf __jmpb, int __retval);
-extern int     setjmp(jmp_buf __jmpb);
+#define BUFMAX                 2048
 
-/* Forced breakpoint */
-#define breakpoint()	__asm__ __volatile__("trapa   #0x3c")
+#define CACHE_FLUSH_IS_SAFE	1
+#define BREAK_INSTR_SIZE	2
 
-#endif
+#endif /* __ASM_SH_KGDB_H */

arch/sh/include/asm/machvec.h

@@ -14,8 +14,6 @@
 #include <linux/time.h>
 #include <asm/machtypes.h>
 
-struct device;
-
 struct sh_machine_vector {
 	void (*mv_setup)(char **cmdline_p);
 	const char *mv_name;
@@ -45,9 +43,6 @@ struct sh_machine_vector {
 	int (*mv_irq_demux)(int irq);
 
 	void (*mv_init_irq)(void);
-	void (*mv_init_pci)(void);
-
-	void (*mv_heartbeat)(void);
 
 	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
 	void (*mv_ioport_unmap)(void __iomem *);

arch/sh/include/asm/mmu_context.h

@@ -22,7 +22,7 @@
 #define MMU_CONTEXT_ASID_MASK		0x000000ff
 #define MMU_CONTEXT_VERSION_MASK	0xffffff00
 #define MMU_CONTEXT_FIRST_VERSION	0x00000100
-#define NO_CONTEXT			0
+#define NO_CONTEXT			0UL
 
 /* ASID is 8-bit value, so it can't be 0x100 */
 #define MMU_NO_ASID			0x100
@@ -130,7 +130,7 @@ static inline void switch_mm(struct mm_struct *prev,
 #define destroy_context(mm)		do { } while (0)
 #define set_asid(asid)			do { } while (0)
 #define get_asid()			(0)
-#define cpu_asid(cpu, mm)		({ (void)cpu; 0; })
+#define cpu_asid(cpu, mm)		({ (void)cpu; NO_CONTEXT; })
 #define switch_and_save_asid(asid)	(0)
 #define set_TTB(pgd)			do { } while (0)
 #define get_TTB()			(0)

arch/sh/include/asm/mutex-llsc.h

@@ -0,0 +1,112 @@
+/*
+ * arch/sh/include/asm/mutex-llsc.h
+ *
+ * SH-4A optimized mutex locking primitives
+ *
+ * Please look into asm-generic/mutex-xchg.h for a formal definition.
+ */
+#ifndef __ASM_SH_MUTEX_LLSC_H
+#define __ASM_SH_MUTEX_LLSC_H
+
+/*
+ * Attempting to lock a mutex on SH4A is done like in ARMv6+ architecure.
+ * with a bastardized atomic decrement (it is not a reliable atomic decrement
+ * but it satisfies the defined semantics for our purpose, while being
+ * smaller and faster than a real atomic decrement or atomic swap.
+ * The idea is to attempt  decrementing the lock value only once. If once
+ * decremented it isn't zero, or if its store-back fails due to a dispute
+ * on the exclusive store, we simply bail out immediately through the slow
+ * path where the lock will be reattempted until it succeeds.
+ */
+static inline void
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res;
+
+	__asm__ __volatile__ (
+		"movli.l	@%2, %0	\n"
+		"add		#-1, %0	\n"
+		"movco.l	%0, @%2	\n"
+		"movt		%1	\n"
+		: "=&z" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "t");
+
+	__res |= !__ex_flag;
+	if (unlikely(__res != 0))
+		fail_fn(count);
+}
+
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res;
+
+	__asm__ __volatile__ (
+		"movli.l	@%2, %0	\n"
+		"add		#-1, %0	\n"
+		"movco.l	%0, @%2	\n"
+		"movt		%1	\n"
+		: "=&z" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "t");
+
+	__res |= !__ex_flag;
+	if (unlikely(__res != 0))
+		__res = fail_fn(count);
+
+	return __res;
+}
+
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res;
+
+	__asm__ __volatile__ (
+		"movli.l	@%2, %0	\n\t"
+		"add		#1, %0	\n\t"
+		"movco.l	%0, @%2 \n\t"
+		"movt		%1	\n\t"
+		: "=&z" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "t");
+
+	__res |= !__ex_flag;
+	if (unlikely(__res <= 0))
+		fail_fn(count);
+}
+
+/*
+ * If the unlock was done on a contended lock, or if the unlock simply fails
+ * then the mutex remains locked.
+ */
+#define __mutex_slowpath_needs_to_unlock()	1
+
+/*
+ * For __mutex_fastpath_trylock we do an atomic decrement and check the
+ * result and put it in the __res variable.
+ */
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	int __res, __orig;
+
+	__asm__ __volatile__ (
+		"1: movli.l	@%2, %0		\n\t"
+		"dt		%0		\n\t"
+		"movco.l	%0,@%2		\n\t"
+		"bf		1b		\n\t"
+		"cmp/eq		#0,%0		\n\t"
+		"bt		2f		\n\t"
+		"mov		#0, %1		\n\t"
+		"bf		3f		\n\t"
+		"2: mov		#1, %1		\n\t"
+		"3:				"
+		: "=&z" (__orig), "=&r" (__res)
+		: "r" (&count->counter)
+		: "t");
+
+	return __res;
+}
+#endif /* __ASM_SH_MUTEX_LLSC_H */

arch/sh/include/asm/mutex.h

@@ -5,5 +5,8 @@
  * implementation in place, or pick the atomic_xchg() based generic
  * implementation. (see asm-generic/mutex-xchg.h for details)
  */
-
+#if defined(CONFIG_CPU_SH4A)
+#include <asm/mutex-llsc.h>
+#else
 #include <asm-generic/mutex-dec.h>
+#endif

arch/sh/include/asm/pm.h

@@ -1,17 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com>
- *
- */
-#ifndef __ASM_SH_PM_H
-#define __ASM_SH_PM_H
-
-extern u8 wakeup_start;
-extern u8 wakeup_end;
-
-void pm_enter(void);
-
-#endif

arch/sh/include/asm/processor.h

@@ -18,7 +18,7 @@ enum cpu_type {
 	CPU_SH7619,
 
 	/* SH-2A types */
-	CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
+	CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
 
 	/* SH-3 types */
 	CPU_SH7705, CPU_SH7706, CPU_SH7707,
@@ -82,6 +82,9 @@ extern struct sh_cpuinfo cpu_data[];
 #define current_cpu_data cpu_data[smp_processor_id()]
 #define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
 
+#define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
+#define cpu_relax()	barrier()
+
 /* Forward decl */
 struct seq_operations;
 

arch/sh/include/asm/processor_32.h

@@ -175,6 +175,15 @@ static __inline__ void enable_fpu(void)
 
 void show_trace(struct task_struct *tsk, unsigned long *sp,
 		struct pt_regs *regs);
+
+#ifdef CONFIG_DUMP_CODE
+void show_code(struct pt_regs *regs);
+#else
+static inline void show_code(struct pt_regs *regs)
+{
+}
+#endif
+
 extern unsigned long get_wchan(struct task_struct *p);
 
 #define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
@@ -182,9 +191,6 @@ extern unsigned long get_wchan(struct task_struct *p);
 
 #define user_stack_pointer(regs)	((regs)->regs[15])
 
-#define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
-#define cpu_relax()	barrier()
-
 #if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
     defined(CONFIG_CPU_SH4)
 #define PREFETCH_STRIDE		L1_CACHE_BYTES

arch/sh/include/asm/processor_64.h

@@ -226,9 +226,7 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  ((tsk)->thread.pc)
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
-#define user_stack_pointer(regs)	((regs)->sp)
-
-#define cpu_relax()	barrier()
+#define user_stack_pointer(regs)	((regs)->regs[15])
 
 #endif	/* __ASSEMBLY__ */
 #endif /* __ASM_SH_PROCESSOR_64_H */

arch/sh/include/asm/ptrace.h

@@ -86,6 +86,7 @@ struct pt_dspregs {
 	unsigned long	re;
 	unsigned long	mod;
 };
+#endif
 
 #define PTRACE_GETREGS		12	/* General registers */
 #define PTRACE_SETREGS		13
@@ -100,7 +101,6 @@ struct pt_dspregs {
 
 #define	PTRACE_GETDSPREGS	55	/* DSP registers */
 #define	PTRACE_SETDSPREGS	56
-#endif
 
 #ifdef __KERNEL__
 #include <asm/addrspace.h>

arch/sh/include/asm/sh_bios.h

@@ -10,7 +10,6 @@
 
 extern void sh_bios_console_write(const char *buf, unsigned int len);
 extern void sh_bios_char_out(char ch);
-extern int sh_bios_in_gdb_mode(void);
 extern void sh_bios_gdb_detach(void);
 
 extern void sh_bios_get_node_addr(unsigned char *node_addr);

arch/sh/include/asm/string_64.h

@@ -1,17 +1,20 @@
 #ifndef __ASM_SH_STRING_64_H
 #define __ASM_SH_STRING_64_H
 
-/*
- * include/asm-sh/string_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
+#ifdef __KERNEL__
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
 
 #define __HAVE_ARCH_MEMCPY
 extern void *memcpy(void *dest, const void *src, size_t count);
 
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRCPY
+extern char *strcpy(char *__dest, const char *__src);
+
+#endif /* __KERNEL__ */
+
 #endif /* __ASM_SH_STRING_64_H */

arch/sh/include/asm/syscall_32.h

@@ -5,7 +5,7 @@
 #include <linux/sched.h>
 #include <asm/ptrace.h>
 
-/* The system call number is given by the user in %g1 */
+/* The system call number is given by the user in R3 */
 static inline long syscall_get_nr(struct task_struct *task,
 				  struct pt_regs *regs)
 {

arch/sh/include/asm/syscall_64.h

@@ -1,6 +1,80 @@
 #ifndef __ASM_SH_SYSCALL_64_H
 #define __ASM_SH_SYSCALL_64_H
 
-#include <asm-generic/syscall.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in R9 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return (regs->syscall_nr >= 0) ? regs->regs[9] : -1L;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/*
+	 * XXX: This needs some thought. On SH we don't
+	 * save away the original R9 value anywhere.
+	 */
+}
+
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->sr & 0x1) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->sr |= 0x1;
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->sr &= ~0x1;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return syscall_has_error(regs) ? regs->regs[9] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->regs[9];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		syscall_set_error(regs);
+		regs->regs[9] = -error;
+	} else {
+		syscall_clear_error(regs);
+		regs->regs[9] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(args, &regs->regs[2 + i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(&regs->regs[2 + i], args, n * sizeof(args[0]));
+}
 
 #endif /* __ASM_SH_SYSCALL_64_H */

arch/sh/include/asm/system.h

@@ -175,6 +175,8 @@ asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
 BUILD_TRAP_HANDLER(address_error);
 BUILD_TRAP_HANDLER(debug);
 BUILD_TRAP_HANDLER(bug);
+BUILD_TRAP_HANDLER(breakpoint);
+BUILD_TRAP_HANDLER(singlestep);
 BUILD_TRAP_HANDLER(fpu_error);
 BUILD_TRAP_HANDLER(fpu_state_restore);
 

arch/sh/include/asm/unaligned-sh4a.h

@@ -0,0 +1,258 @@
+#ifndef __ASM_SH_UNALIGNED_SH4A_H
+#define __ASM_SH_UNALIGNED_SH4A_H
+
+/*
+ * SH-4A has support for unaligned 32-bit loads, and 32-bit loads only.
+ * Support for 16 and 64-bit accesses are done through shifting and
+ * masking relative to the endianness. Unaligned stores are not supported
+ * by the instruction encoding, so these continue to use the packed
+ * struct.
+ *
+ * The same note as with the movli.l/movco.l pair applies here, as long
+ * as the load is gauranteed to be inlined, nothing else will hook in to
+ * r0 and we get the return value for free.
+ *
+ * NOTE: Due to the fact we require r0 encoding, care should be taken to
+ * avoid mixing these heavily with other r0 consumers, such as the atomic
+ * ops. Failure to adhere to this can result in the compiler running out
+ * of spill registers and blowing up when building at low optimization
+ * levels. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34777.
+ */
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+static __always_inline u32 __get_unaligned_cpu32(const u8 *p)
+{
+	unsigned long unaligned;
+
+	__asm__ __volatile__ (
+		"movua.l	@%1, %0\n\t"
+		 : "=z" (unaligned)
+		 : "r" (p)
+	);
+
+	return unaligned;
+}
+
+struct __una_u16 { u16 x __attribute__((packed)); };
+struct __una_u32 { u32 x __attribute__((packed)); };
+struct __una_u64 { u64 x __attribute__((packed)); };
+
+static inline u16 __get_unaligned_cpu16(const u8 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return __get_unaligned_cpu32(p) & 0xffff;
+#else
+	return __get_unaligned_cpu32(p) >> 16;
+#endif
+}
+
+/*
+ * Even though movua.l supports auto-increment on the read side, it can
+ * only store to r0 due to instruction encoding constraints, so just let
+ * the compiler sort it out on its own.
+ */
+static inline u64 __get_unaligned_cpu64(const u8 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return (u64)__get_unaligned_cpu32(p + 4) << 32 |
+		    __get_unaligned_cpu32(p);
+#else
+	return (u64)__get_unaligned_cpu32(p) << 32 |
+		    __get_unaligned_cpu32(p + 4);
+#endif
+}
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return le16_to_cpu(__get_unaligned_cpu16(p));
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return le32_to_cpu(__get_unaligned_cpu32(p));
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return le64_to_cpu(__get_unaligned_cpu64(p));
+}
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return be16_to_cpu(__get_unaligned_cpu16(p));
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return be32_to_cpu(__get_unaligned_cpu32(p));
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return be64_to_cpu(__get_unaligned_cpu64(p));
+}
+
+static inline void __put_le16_noalign(u8 *p, u16 val)
+{
+	*p++ = val;
+	*p++ = val >> 8;
+}
+
+static inline void __put_le32_noalign(u8 *p, u32 val)
+{
+	__put_le16_noalign(p, val);
+	__put_le16_noalign(p + 2, val >> 16);
+}
+
+static inline void __put_le64_noalign(u8 *p, u64 val)
+{
+	__put_le32_noalign(p, val);
+	__put_le32_noalign(p + 4, val >> 32);
+}
+
+static inline void __put_be16_noalign(u8 *p, u16 val)
+{
+	*p++ = val >> 8;
+	*p++ = val;
+}
+
+static inline void __put_be32_noalign(u8 *p, u32 val)
+{
+	__put_be16_noalign(p, val >> 16);
+	__put_be16_noalign(p + 2, val);
+}
+
+static inline void __put_be64_noalign(u8 *p, u64 val)
+{
+	__put_be32_noalign(p, val >> 32);
+	__put_be32_noalign(p + 4, val);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+#ifdef __LITTLE_ENDIAN
+	((struct __una_u16 *)p)->x = val;
+#else
+	__put_le16_noalign(p, val);
+#endif
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+#ifdef __LITTLE_ENDIAN
+	((struct __una_u32 *)p)->x = val;
+#else
+	__put_le32_noalign(p, val);
+#endif
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+#ifdef __LITTLE_ENDIAN
+	((struct __una_u64 *)p)->x = val;
+#else
+	__put_le64_noalign(p, val);
+#endif
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+#ifdef __BIG_ENDIAN
+	((struct __una_u16 *)p)->x = val;
+#else
+	__put_be16_noalign(p, val);
+#endif
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+#ifdef __BIG_ENDIAN
+	((struct __una_u32 *)p)->x = val;
+#else
+	__put_be32_noalign(p, val);
+#endif
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+#ifdef __BIG_ENDIAN
+	((struct __una_u64 *)p)->x = val;
+#else
+	__put_be64_noalign(p, val);
+#endif
+}
+
+/*
+ * Cause a link-time error if we try an unaligned access other than
+ * 1,2,4 or 8 bytes long
+ */
+extern void __bad_unaligned_access_size(void);
+
+#define __get_unaligned_le(ptr) ((__force typeof(*(ptr)))({			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_le16((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_le32((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_le64((ptr)),	\
+	__bad_unaligned_access_size()))));					\
+	}))
+
+#define __get_unaligned_be(ptr) ((__force typeof(*(ptr)))({			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_be16((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_be32((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_be64((ptr)),	\
+	__bad_unaligned_access_size()))));					\
+	}))
+
+#define __put_unaligned_le(val, ptr) ({					\
+	void *__gu_p = (ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		*(u8 *)__gu_p = (__force u8)(val);			\
+		break;							\
+	case 2:								\
+		put_unaligned_le16((__force u16)(val), __gu_p);		\
+		break;							\
+	case 4:								\
+		put_unaligned_le32((__force u32)(val), __gu_p);		\
+		break;							\
+	case 8:								\
+		put_unaligned_le64((__force u64)(val), __gu_p);		\
+		break;							\
+	default:							\
+		__bad_unaligned_access_size();				\
+		break;							\
+	}								\
+	(void)0; })
+
+#define __put_unaligned_be(val, ptr) ({					\
+	void *__gu_p = (ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		*(u8 *)__gu_p = (__force u8)(val);			\
+		break;							\
+	case 2:								\
+		put_unaligned_be16((__force u16)(val), __gu_p);		\
+		break;							\
+	case 4:								\
+		put_unaligned_be32((__force u32)(val), __gu_p);		\
+		break;							\
+	case 8:								\
+		put_unaligned_be64((__force u64)(val), __gu_p);		\
+		break;							\
+	default:							\
+		__bad_unaligned_access_size();				\
+		break;							\
+	}								\
+	(void)0; })
+
+#ifdef __LITTLE_ENDIAN
+# define get_unaligned __get_unaligned_le
+# define put_unaligned __put_unaligned_le
+#else
+# define get_unaligned __get_unaligned_be
+# define put_unaligned __put_unaligned_be
+#endif
+
+#endif /* __ASM_SH_UNALIGNED_SH4A_H */

arch/sh/include/asm/unaligned.h

@@ -1,7 +1,11 @@
 #ifndef _ASM_SH_UNALIGNED_H
 #define _ASM_SH_UNALIGNED_H
 
-/* SH can't handle unaligned accesses. */
+#ifdef CONFIG_CPU_SH4A
+/* SH-4A can handle unaligned loads in a relatively neutered fashion. */
+#include <asm/unaligned-sh4a.h>
+#else
+/* Otherwise, SH can't handle unaligned accesses. */
 #ifdef __LITTLE_ENDIAN__
 # include <linux/unaligned/le_struct.h>
 # include <linux/unaligned/be_byteshift.h>
@@ -15,5 +19,6 @@
 # define get_unaligned	__get_unaligned_be
 # define put_unaligned	__put_unaligned_be
 #endif
+#endif
 
 #endif /* _ASM_SH_UNALIGNED_H */

arch/sh/include/cpu-sh3/cpu/gpio.h

@@ -62,6 +62,20 @@
 #define PORT_PSELC	0xA4050128UL
 #define PORT_PSELD	0xA405012AUL
 
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+
+/* Control registers */
+#define PORT_PACR       0xa4000100UL
+#define PORT_PBCR       0xa4000102UL
+#define PORT_PCCR       0xa4000104UL
+#define PORT_PFCR       0xa400010aUL
+
+/* Data registers */
+#define PORT_PADR       0xa4000120UL
+#define PORT_PBDR       0xa4000122UL
+#define PORT_PCDR       0xa4000124UL
+#define PORT_PFDR       0xa400012aUL
+
 #endif
 
 #endif

arch/sh/include/mach-common/mach/edosk7705.h

@@ -1,30 +1,7 @@
-/*
- * include/asm-sh/edosk7705.h
- *
- * Modified version of io_se.h for the EDOSK7705 specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for an Hitachi EDOSK7705 development board
- */
-
-#ifndef __ASM_SH_EDOSK7705_IO_H
-#define __ASM_SH_EDOSK7705_IO_H
+#ifndef __ASM_SH_EDOSK7705_H
+#define __ASM_SH_EDOSK7705_H
 
+#define __IO_PREFIX sh_edosk7705
 #include <asm/io_generic.h>
 
-extern unsigned char sh_edosk7705_inb(unsigned long port);
-extern unsigned int sh_edosk7705_inl(unsigned long port);
-
-extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
-extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
-
-extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
-
-#endif /* __ASM_SH_EDOSK7705_IO_H */
+#endif /* __ASM_SH_EDOSK7705_H */

arch/sh/include/mach-se/mach/mrshpc.h

@@ -0,0 +1,52 @@
+#ifndef __MACH_SE_MRSHPC_H
+#define __MACH_SE_MRSHPC_H
+
+#include <linux/io.h>
+
+static inline void __init mrshpc_setup_windows(void)
+{
+	if ((__raw_readw(MRSHPC_CSR) & 0x000c) != 0)
+		return;	/* Not detected */
+
+	if ((__raw_readw(MRSHPC_CSR) & 0x0080) == 0) {
+		__raw_writew(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */
+	} else {
+		__raw_writew(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */
+	}
+
+	/*
+	 *  PC-Card window open
+	 *  flag == COMMON/ATTRIBUTE/IO
+	 */
+	/* common window open */
+	__raw_writew(0x8a84, MRSHPC_MW0CR1);
+	if((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
+		/* common mode & bus width 16bit SWAP = 1*/
+		__raw_writew(0x0b00, MRSHPC_MW0CR2);
+	else
+		/* common mode & bus width 16bit SWAP = 0*/
+		__raw_writew(0x0300, MRSHPC_MW0CR2);
+
+	/* attribute window open */
+	__raw_writew(0x8a85, MRSHPC_MW1CR1);
+	if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
+		/* attribute mode & bus width 16bit SWAP = 1*/
+		__raw_writew(0x0a00, MRSHPC_MW1CR2);
+	else
+		/* attribute mode & bus width 16bit SWAP = 0*/
+		__raw_writew(0x0200, MRSHPC_MW1CR2);
+
+	/* I/O window open */
+	__raw_writew(0x8a86, MRSHPC_IOWCR1);
+	__raw_writew(0x0008, MRSHPC_CDCR);	 /* I/O card mode */
+	if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
+		__raw_writew(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
+	else
+		__raw_writew(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/
+
+	__raw_writew(0x2000, MRSHPC_ICR);
+	__raw_writeb(0x00, PA_MRSHPC_MW2 + 0x206);
+	__raw_writeb(0x42, PA_MRSHPC_MW2 + 0x200);
+}
+
+#endif /* __MACH_SE_MRSHPC_H */

arch/sh/include/mach-se/mach/se.h

@@ -68,6 +68,24 @@
 #define BCR_ILCRF	(PA_BCR + 10)
 #define BCR_ILCRG	(PA_BCR + 12)
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define INTC_IRR0       0xa4000004UL
+#define INTC_IRR1       0xa4000006UL
+#define INTC_IRR2       0xa4000008UL
+
+#define INTC_ICR0       0xfffffee0UL
+#define INTC_ICR1       0xa4000010UL
+#define INTC_ICR2       0xa4000012UL
+#define INTC_INTER      0xa4000014UL
+
+#define INTC_IPRC       0xa4000016UL
+#define INTC_IPRD       0xa4000018UL
+#define INTC_IPRE       0xa400001aUL
+
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+#endif
+
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 #define IRQ_STNIC	12
 #define IRQ_CFCARD	14

arch/sh/include/mach-se/mach/se7343.h

@@ -118,9 +118,6 @@
 #define FPGA_IN		0xb1400000
 #define FPGA_OUT	0xb1400002
 
-#define __IO_PREFIX	sh7343se
-#include <asm/io_generic.h>
-
 #define IRQ0_IRQ        32
 #define IRQ1_IRQ        33
 #define IRQ4_IRQ        36
@@ -132,8 +129,10 @@
 #define SE7343_FPGA_IRQ_MRSHPC3	3
 #define SE7343_FPGA_IRQ_SMC	6	/* EXT_IRQ2 */
 #define SE7343_FPGA_IRQ_USB	8
+#define SE7343_FPGA_IRQ_UARTA	10
+#define SE7343_FPGA_IRQ_UARTB	11
 
-#define SE7343_FPGA_IRQ_NR	11
+#define SE7343_FPGA_IRQ_NR	12
 #define SE7343_FPGA_IRQ_BASE	120
 
 #define MRSHPC_IRQ3    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3)
@@ -142,6 +141,8 @@
 #define MRSHPC_IRQ0    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0)
 #define SMC_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC)
 #define USB_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB)
+#define UARTA_IRQ	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_UARTA)
+#define UARTB_IRQ	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_UARTB)
 
 /* arch/sh/boards/se/7343/irq.c */
 void init_7343se_IRQ(void);

arch/sh/kernel/Makefile_32

@@ -4,25 +4,31 @@
 
 extra-y	:= head_32.o init_task.o vmlinux.lds
 
-obj-y	:= debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \
-	   ptrace_32.o setup.o signal_32.o sys_sh.o sys_sh32.o \
-	   syscalls_32.o time_32.o topology.o traps.o traps_32.o
+ifdef CONFIG_FUNCTION_TRACER
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_ftrace.o = -pg
+endif
+
+obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o			\
+	   machvec.o process_32.o ptrace_32.o setup.o signal_32.o	\
+	   sys_sh.o sys_sh32.o syscalls_32.o time_32.o topology.o	\
+	   traps.o traps_32.o
 
 obj-y				+= cpu/ timers/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_CF_ENABLER)	+= cf-enabler.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
-obj-$(CONFIG_SH_KGDB)		+= kgdb_stub.o kgdb_jmp.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
 obj-$(CONFIG_MODULES)		+= sh_ksyms_32.o module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
-obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 
 EXTRA_CFLAGS += -Werror

arch/sh/kernel/Makefile_64

@@ -1,21 +1,18 @@
 extra-y	:= head_64.o init_task.o vmlinux.lds
 
-obj-y	:= debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \
+obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \
 	   ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
 	   syscalls_64.o time_64.o topology.o traps.o traps_64.o
 
 obj-y				+= cpu/ timers/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_CF_ENABLER)	+= cf-enabler.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
-obj-$(CONFIG_SH_KGDB)		+= kgdb_stub.o kgdb_jmp.o
 obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
 obj-$(CONFIG_MODULES)		+= sh_ksyms_64.o module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
-obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o

arch/sh/kernel/cf-enabler.c

@@ -1,168 +0,0 @@
-/* $Id: cf-enabler.c,v 1.4 2004/02/22 22:44:36 kkojima Exp $
- *
- *  linux/drivers/block/cf-enabler.c
- *
- *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2000  Toshiharu Nozawa
- *  Copyright (C) 2001  A&D Co., Ltd.
- *
- *  Enable the CF configuration.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-/*
- * You can connect Compact Flash directly to the bus of SuperH.
- * This is the enabler for that.
- *
- * SIM: How generic is this really? It looks pretty board, or at
- * least SH sub-type, specific to me.
- * I know it doesn't work on the Overdrive!
- */
-
-/*
- * 0xB8000000 : Attribute
- * 0xB8001000 : Common Memory
- * 0xBA000000 : I/O
- */
-#if defined(CONFIG_CPU_SH4)
-/* SH4 can't access PCMCIA interface through P2 area.
- * we must remap it with appropriate attribute bit of the page set.
- * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
-
-#if defined(CONFIG_CF_AREA6)
-#define slot_no 0
-#else
-#define slot_no 1
-#endif
-
-/* use this pointer to access to directly connected compact flash io area*/
-void *cf_io_base;
-
-static int __init allocate_cf_area(void)
-{
-	pgprot_t prot;
-	unsigned long paddrbase, psize;
-
-	/* open I/O area window */
-	paddrbase = virt_to_phys((void*)CONFIG_CF_BASE_ADDR);
-	psize = PAGE_SIZE;
-	prot = PAGE_KERNEL_PCC(slot_no, _PAGE_PCC_IO16);
-	cf_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
-	if (!cf_io_base) {
-		printk("allocate_cf_area : can't open CF I/O window!\n");
-		return -ENOMEM;
-	}
-/*	printk("p3_ioremap(paddr=0x%08lx, psize=0x%08lx, prot=0x%08lx)=0x%08lx\n",
-		paddrbase, psize, prot.pgprot, cf_io_base);*/
-
-	/* XXX : do we need attribute and common-memory area also? */
-
-	return 0;
-}
-#endif
-
-static int __init cf_init_default(void)
-{
-/* You must have enabled the card, and set the level interrupt
- * before reaching this point. Possibly in boot ROM or boot loader.
- */
-#if defined(CONFIG_CPU_SH4)
-	allocate_cf_area();
-#endif
-
-	return 0;
-}
-
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <mach-se/mach/se.h>
-#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <mach-se/mach/se7722.h>
-#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <mach-se/mach/se7721.h>
-#endif
-
-/*
- * SolutionEngine Seriese
- *
- * about MS770xSE
- * 0xB8400000 : Common Memory
- * 0xB8500000 : Attribute
- * 0xB8600000 : I/O
- *
- * about MS7722SE
- * 0xB0400000 : Common Memory
- * 0xB0500000 : Attribute
- * 0xB0600000 : I/O
- */
-
-#if defined(CONFIG_SH_SOLUTION_ENGINE) || \
-    defined(CONFIG_SH_7722_SOLUTION_ENGINE) || \
-    defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-static int __init cf_init_se(void)
-{
-	if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
-		return 0;	/* Not detected */
-
-	if ((ctrl_inw(MRSHPC_CSR) & 0x0080) == 0) {
-		ctrl_outw(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */
-	} else {
-		ctrl_outw(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */
-	}
-
-	/*
-	 *  PC-Card window open
-	 *  flag == COMMON/ATTRIBUTE/IO
-	 */
-	/* common window open */
-	ctrl_outw(0x8a84, MRSHPC_MW0CR1);
-	if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
-		/* common mode & bus width 16bit SWAP = 1*/
-		ctrl_outw(0x0b00, MRSHPC_MW0CR2);
-	else
-		/* common mode & bus width 16bit SWAP = 0*/
-		ctrl_outw(0x0300, MRSHPC_MW0CR2);
-
-	/* attribute window open */
-	ctrl_outw(0x8a85, MRSHPC_MW1CR1);
-	if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
-		/* attribute mode & bus width 16bit SWAP = 1*/
-		ctrl_outw(0x0a00, MRSHPC_MW1CR2);
-	else
-		/* attribute mode & bus width 16bit SWAP = 0*/
-		ctrl_outw(0x0200, MRSHPC_MW1CR2);
-
-	/* I/O window open */
-	ctrl_outw(0x8a86, MRSHPC_IOWCR1);
-	ctrl_outw(0x0008, MRSHPC_CDCR);	 /* I/O card mode */
-	if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
-		ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
-	else
-		ctrl_outw(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/
-
-	ctrl_outw(0x2000, MRSHPC_ICR);
-	ctrl_outb(0x00, PA_MRSHPC_MW2 + 0x206);
-	ctrl_outb(0x42, PA_MRSHPC_MW2 + 0x200);
-	return 0;
-}
-#else
-static int __init cf_init_se(void)
-{
-	return -1;
-}
-#endif
-
-static int __init cf_init(void)
-{
-	if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
-		return cf_init_se();
-
-	return cf_init_default();
-}
-
-__initcall (cf_init);

arch/sh/kernel/cpu/clock.c

@@ -117,6 +117,11 @@ int clk_enable(struct clk *clk)
 	unsigned long flags;
 	int ret;
 
+	if (!clk)
+		return -EINVAL;
+
+	clk_enable(clk->parent);
+
 	spin_lock_irqsave(&clock_lock, flags);
 	ret = __clk_enable(clk);
 	spin_unlock_irqrestore(&clock_lock, flags);
@@ -147,9 +152,14 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return;
+
 	spin_lock_irqsave(&clock_lock, flags);
 	__clk_disable(clk);
 	spin_unlock_irqrestore(&clock_lock, flags);
+
+	clk_disable(clk->parent);
 }
 EXPORT_SYMBOL_GPL(clk_disable);
 

arch/sh/kernel/cpu/init.c

@@ -261,9 +261,11 @@ asmlinkage void __init sh_cpu_init(void)
 	cache_init();
 
 	if (raw_smp_processor_id() == 0) {
+#ifdef CONFIG_MMU
 		shm_align_mask = max_t(unsigned long,
 				       current_cpu_data.dcache.way_size - 1,
 				       PAGE_SIZE - 1);
+#endif
 
 		/* Boot CPU sets the cache shape */
 		detect_cache_shape();

arch/sh/kernel/cpu/sh2a/Makefile

@@ -8,9 +8,10 @@ common-y	+= ex.o entry.o
 
 obj-$(CONFIG_SH_FPU)	+= fpu.o
 
-obj-$(CONFIG_CPU_SUBTYPE_SH7206)	+= setup-sh7206.o clock-sh7206.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7201)	+= setup-sh7201.o clock-sh7201.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7203)	+= setup-sh7203.o clock-sh7203.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7263)	+= setup-sh7203.o clock-sh7203.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7206)	+= setup-sh7206.o clock-sh7206.o
 obj-$(CONFIG_CPU_SUBTYPE_MXG)		+= setup-mxg.o clock-sh7206.o
 
 # Pinmux setup

arch/sh/kernel/cpu/sh2a/clock-sh7201.c

@@ -0,0 +1,85 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+ *
+ * SH7201 support for the clock framework
+ *
+ *  Copyright (C) 2008 Peter Griffin  <pgriffin@mpc-data.co.uk>
+ *
+ * Based on clock-sh4.c
+ *  Copyright (C) 2005  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+const static int pll1rate[]={1,2,3,4,6,8};
+const static int pfc_divisors[]={1,2,3,4,6,8,12};
+#define ifc_divisors pfc_divisors
+
+#if (CONFIG_SH_CLK_MD == 0)
+#define PLL2 (4)
+#elif (CONFIG_SH_CLK_MD == 2)
+#define PLL2 (2)
+#elif (CONFIG_SH_CLK_MD == 3)
+#define PLL2 (1)
+#else
+#error "Illegal Clock Mode!"
+#endif
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate = 10000000 * PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+}
+
+static struct clk_ops sh7201_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7201_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7201_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inw(FREQCR) >> 4) & 0x0007);
+	clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7201_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7201_clk_ops[] = {
+	&sh7201_master_clk_ops,
+	&sh7201_module_clk_ops,
+	&sh7201_bus_clk_ops,
+	&sh7201_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7201_clk_ops))
+		*ops = sh7201_clk_ops[idx];
+}

arch/sh/kernel/cpu/sh2a/probe.c

@@ -18,16 +18,17 @@ int __init detect_cpu_and_cache_system(void)
 	/* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */
 	boot_cpu_data.flags			|= CPU_HAS_OP32;
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7203)
+#if defined(CONFIG_CPU_SUBTYPE_SH7201)
+	boot_cpu_data.type			= CPU_SH7201;
+	boot_cpu_data.flags			|= CPU_HAS_FPU;
+#elif defined(CONFIG_CPU_SUBTYPE_SH7203)
 	boot_cpu_data.type			= CPU_SH7203;
-	/* SH7203 has an FPU.. */
 	boot_cpu_data.flags			|= CPU_HAS_FPU;
 #elif defined(CONFIG_CPU_SUBTYPE_SH7263)
 	boot_cpu_data.type			= CPU_SH7263;
 	boot_cpu_data.flags			|= CPU_HAS_FPU;
 #elif defined(CONFIG_CPU_SUBTYPE_SH7206)
 	boot_cpu_data.type			= CPU_SH7206;
-	/* While SH7206 has a DSP.. */
 	boot_cpu_data.flags			|= CPU_HAS_DSP;
 #elif defined(CONFIG_CPU_SUBTYPE_MXG)
 	boot_cpu_data.type			= CPU_MXG;

arch/sh/kernel/cpu/sh2a/setup-sh7201.c

@@ -0,0 +1,331 @@
+/*
+ *  SH7201 setup
+ *
+ *  Copyright (C) 2008  Peter Griffin pgriffin@mpc-data.co.uk
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+	ADC_ADI,
+	MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
+	MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
+	MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
+	MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
+	MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
+	MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
+	MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
+	RTC_ARM, RTC_PRD, RTC_CUP,
+	WDT,
+	IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI,
+	IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI,
+	IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI,
+
+	DMAC0_DMINT0, DMAC1_DMINT1,
+	DMAC2_DMINT2, DMAC3_DMINT3,
+
+	SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
+	SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
+	SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
+	SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
+	SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
+	SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
+	SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
+	SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
+
+	DMAC0_DMINTA, DMAC4_DMINT4, DMAC5_DMINT5, DMAC6_DMINT6,
+	DMAC7_DMINT7,
+
+	RCAN0_ERS, RCAN0_OVR,
+	RCAN0_SLE,
+	RCAN0_RM0, RCAN0_RM1,
+
+	RCAN1_ERS, RCAN1_OVR,
+	RCAN1_SLE,
+	RCAN1_RM0, RCAN1_RM1,
+
+	SSI0_SSII, SSI1_SSII,
+
+	TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0,
+	TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1,
+
+	/* interrupt groups */
+
+	IRQ, PINT, ADC,
+	MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU,
+	MTU23_ABCD, MTU24_ABCD, MTU25_UVW,
+	RTC, IIC30, IIC31, IIC32,
+	SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
+	RCAN0, RCAN1, TMR0, TMR1
+
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+
+	INTC_IRQ(ADC_ADI, 92),
+
+	INTC_IRQ(MTU2_TGI0A, 108), INTC_IRQ(MTU2_TGI0B, 109),
+	INTC_IRQ(MTU2_TGI0C, 110), INTC_IRQ(MTU2_TGI0D, 111),
+	INTC_IRQ(MTU2_TCI0V, 112),
+	INTC_IRQ(MTU2_TGI0E, 113), INTC_IRQ(MTU2_TGI0F, 114),
+
+	INTC_IRQ(MTU2_TGI1A, 116), INTC_IRQ(MTU2_TGI1B, 117),
+	INTC_IRQ(MTU2_TCI1V, 120), INTC_IRQ(MTU2_TCI1U, 121),
+
+	INTC_IRQ(MTU2_TGI2A, 124), INTC_IRQ(MTU2_TGI2B, 125),
+	INTC_IRQ(MTU2_TCI2V, 128), INTC_IRQ(MTU2_TCI2U, 129),
+
+	INTC_IRQ(MTU2_TGI3A, 132), INTC_IRQ(MTU2_TGI3B, 133),
+	INTC_IRQ(MTU2_TGI3C, 134), INTC_IRQ(MTU2_TGI3D, 135),
+	INTC_IRQ(MTU2_TCI3V, 136),
+
+	INTC_IRQ(MTU2_TGI4A, 140), INTC_IRQ(MTU2_TGI4B, 141),
+	INTC_IRQ(MTU2_TGI4C, 142), INTC_IRQ(MTU2_TGI4D, 143),
+	INTC_IRQ(MTU2_TCI4V, 144),
+
+	INTC_IRQ(MTU2_TGI5U, 148), INTC_IRQ(MTU2_TGI5V, 149),
+	INTC_IRQ(MTU2_TGI5W, 150),
+
+	INTC_IRQ(RTC_ARM, 152), INTC_IRQ(RTC_PRD, 153),
+	INTC_IRQ(RTC_CUP, 154), INTC_IRQ(WDT, 156),
+
+	INTC_IRQ(IIC30_STPI, 157), INTC_IRQ(IIC30_NAKI, 158),
+	INTC_IRQ(IIC30_RXI, 159), INTC_IRQ(IIC30_TXI, 160),
+	INTC_IRQ(IIC30_TEI, 161),
+
+	INTC_IRQ(IIC31_STPI, 164), INTC_IRQ(IIC31_NAKI, 165),
+	INTC_IRQ(IIC31_RXI, 166), INTC_IRQ(IIC31_TXI, 167),
+	INTC_IRQ(IIC31_TEI, 168),
+
+	INTC_IRQ(IIC32_STPI, 170), INTC_IRQ(IIC32_NAKI, 171),
+	INTC_IRQ(IIC32_RXI, 172), INTC_IRQ(IIC32_TXI, 173),
+	INTC_IRQ(IIC32_TEI, 174),
+
+	INTC_IRQ(DMAC0_DMINT0, 176), INTC_IRQ(DMAC1_DMINT1, 177),
+	INTC_IRQ(DMAC2_DMINT2, 178), INTC_IRQ(DMAC3_DMINT3, 179),
+
+	INTC_IRQ(SCIF0_BRI, 180), INTC_IRQ(SCIF0_ERI, 181),
+	INTC_IRQ(SCIF0_RXI, 182), INTC_IRQ(SCIF0_TXI, 183),
+	INTC_IRQ(SCIF1_BRI, 184), INTC_IRQ(SCIF1_ERI, 185),
+	INTC_IRQ(SCIF1_RXI, 186), INTC_IRQ(SCIF1_TXI, 187),
+	INTC_IRQ(SCIF2_BRI, 188), INTC_IRQ(SCIF2_ERI, 189),
+	INTC_IRQ(SCIF2_RXI, 190), INTC_IRQ(SCIF2_TXI, 191),
+	INTC_IRQ(SCIF3_BRI, 192), INTC_IRQ(SCIF3_ERI, 193),
+	INTC_IRQ(SCIF3_RXI, 194), INTC_IRQ(SCIF3_TXI, 195),
+	INTC_IRQ(SCIF4_BRI, 196), INTC_IRQ(SCIF4_ERI, 197),
+	INTC_IRQ(SCIF4_RXI, 198), INTC_IRQ(SCIF4_TXI, 199),
+	INTC_IRQ(SCIF5_BRI, 200), INTC_IRQ(SCIF5_ERI, 201),
+	INTC_IRQ(SCIF5_RXI, 202), INTC_IRQ(SCIF5_TXI, 203),
+	INTC_IRQ(SCIF6_BRI, 204), INTC_IRQ(SCIF6_ERI, 205),
+	INTC_IRQ(SCIF6_RXI, 206), INTC_IRQ(SCIF6_TXI, 207),
+	INTC_IRQ(SCIF7_BRI, 208), INTC_IRQ(SCIF7_ERI, 209),
+	INTC_IRQ(SCIF7_RXI, 210), INTC_IRQ(SCIF7_TXI, 211),
+
+	INTC_IRQ(DMAC0_DMINTA, 212), INTC_IRQ(DMAC4_DMINT4, 216),
+	INTC_IRQ(DMAC5_DMINT5, 217), INTC_IRQ(DMAC6_DMINT6, 218),
+	INTC_IRQ(DMAC7_DMINT7, 219),
+
+	INTC_IRQ(RCAN0_ERS, 228), INTC_IRQ(RCAN0_OVR, 229),
+	INTC_IRQ(RCAN0_SLE, 230),
+	INTC_IRQ(RCAN0_RM0, 231), INTC_IRQ(RCAN0_RM1, 232),
+
+	INTC_IRQ(RCAN1_ERS, 234), INTC_IRQ(RCAN1_OVR, 235),
+	INTC_IRQ(RCAN1_SLE, 236),
+	INTC_IRQ(RCAN1_RM0, 237), INTC_IRQ(RCAN1_RM1, 238),
+
+	INTC_IRQ(SSI0_SSII, 244), INTC_IRQ(SSI1_SSII, 245),
+
+	INTC_IRQ(TMR0_CMIA0, 246), INTC_IRQ(TMR0_CMIB0, 247),
+	INTC_IRQ(TMR0_OVI0, 248),
+
+	INTC_IRQ(TMR1_CMIA1, 252), INTC_IRQ(TMR1_CMIB1, 253),
+	INTC_IRQ(TMR1_OVI1, 254),
+
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+		   PINT4, PINT5, PINT6, PINT7),
+	INTC_GROUP(MTU20_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D),
+	INTC_GROUP(MTU20_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F),
+
+	INTC_GROUP(MTU21_AB, MTU2_TGI1A, MTU2_TGI1B),
+	INTC_GROUP(MTU21_VU, MTU2_TCI1V, MTU2_TCI1U),
+	INTC_GROUP(MTU22_AB, MTU2_TGI2A, MTU2_TGI2B),
+	INTC_GROUP(MTU22_VU, MTU2_TCI2V, MTU2_TCI2U),
+	INTC_GROUP(MTU23_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D),
+	INTC_GROUP(MTU24_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
+	INTC_GROUP(MTU25_UVW, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
+	INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP ),
+
+	INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI,
+		   IIC30_TEI),
+	INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI,
+		   IIC31_TEI),
+	INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI,
+		   IIC32_TEI),
+
+	INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
+	INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
+	INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
+	INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
+	INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
+	INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
+	INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
+	INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
+
+	INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1,
+		   RCAN0_SLE),
+	INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1,
+		   RCAN1_SLE),
+
+	INTC_GROUP(TMR0, TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0),
+	INTC_GROUP(TMR1, TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffe9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfffe941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfffe9420, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI, 0 } },
+	{ 0xfffe9800, 0, 16, 4, /* IPR06 */ { 0, MTU20_ABCD, MTU20_VEF, MTU21_AB } },
+	{ 0xfffe9802, 0, 16, 4, /* IPR07 */ { MTU21_VU, MTU22_AB, MTU22_VU,  MTU23_ABCD } },
+	{ 0xfffe9804, 0, 16, 4, /* IPR08 */ { MTU2_TCI3V, MTU24_ABCD, MTU2_TCI4V, MTU25_UVW } },
+
+	{ 0xfffe9806, 0, 16, 4, /* IPR09 */ { RTC, WDT, IIC30, 0 } },
+	{ 0xfffe9808, 0, 16, 4, /* IPR10 */ { IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1 } },
+	{ 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0 , SCIF1 } },
+	{ 0xfffe980c, 0, 16, 4, /* IPR12 */ { SCIF2, SCIF3, SCIF4, SCIF5 } },
+	{ 0xfffe980e, 0, 16, 4, /* IPR13 */ { SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4  } },
+	{ 0xfffe9810, 0, 16, 4, /* IPR14 */ { DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, 0 } },
+	{ 0xfffe9812, 0, 16, 4, /* IPR15 */ { 0, RCAN0, RCAN1, 0 } },
+	{ 0xfffe9814, 0, 16, 4, /* IPR16 */ { SSI0_SSII, SSI1_SSII, TMR0, TMR1 } },
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfffe9408, 0, 16, /* PINTER */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7201", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xfffe8000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 181, 182, 183, 180}
+	}, {
+		.mapbase	= 0xfffe8800,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 185, 186, 187, 184}
+	}, {
+		.mapbase	= 0xfffe9000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 189, 186, 187, 188}
+	}, {
+		.mapbase	= 0xfffe9800,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 193, 194, 195, 192}
+	}, {
+		.mapbase	= 0xfffea000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 196, 198, 199, 196}
+	}, {
+		.mapbase	= 0xfffea800,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 201, 202, 203, 200}
+	}, {
+		.mapbase	= 0xfffeb000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 205, 206, 207, 204}
+	}, {
+		.mapbase	= 0xfffeb800,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 209, 210, 211, 208}
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xffff0800,
+		.end	= 0xffff2000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= 153,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= 154,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= 152,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct platform_device *sh7201_devices[] __initdata = {
+	&sci_device,
+	&rtc_device,
+};
+
+static int __init sh7201_devices_setup(void)
+{
+	return platform_add_devices(sh7201_devices,
+				    ARRAY_SIZE(sh7201_devices));
+}
+__initcall(sh7201_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}

arch/sh/kernel/cpu/sh3/entry.S

@@ -52,7 +52,7 @@
  *	syscall #
  *
  */
-#if defined(CONFIG_KGDB_NMI)
+#if defined(CONFIG_KGDB)
 NMI_VEC = 0x1c0			! Must catch early for debounce
 #endif
 
@@ -307,7 +307,7 @@ skip_restore:
 6:	or	k0, k2			! Set the IMASK-bits
 	ldc	k2, ssr
 	!
-#if defined(CONFIG_KGDB_NMI)
+#if defined(CONFIG_KGDB)
 	! Clear in_nmi
 	mov.l	6f, k0
 	mov	#0, k1
@@ -320,7 +320,7 @@ skip_restore:
 
 	.align	2
 5:	.long	0x00001000	! DSP
-#ifdef CONFIG_KGDB_NMI
+#ifdef CONFIG_KGDB
 6:	.long	in_nmi
 #endif
 7:	.long	0x30000000
@@ -376,9 +376,9 @@ tlb_miss:
 !
 	.balign 	512,0,512
 interrupt:
-	mov.l	2f, k2
 	mov.l	3f, k3
-#if defined(CONFIG_KGDB_NMI)
+#if defined(CONFIG_KGDB)
+	mov.l	2f, k2
 	! Debounce (filter nested NMI)
 	mov.l	@k2, k0
 	mov.l	5f, k1
@@ -390,16 +390,16 @@ interrupt:
 	rte
 	 nop
 	.align	2
+2:	.long	INTEVT
 5:	.long	NMI_VEC
 6:	.long	in_nmi
 0:
-#endif /* defined(CONFIG_KGDB_NMI) */
+#endif /* defined(CONFIG_KGDB) */
 	bra	handle_exception
 	 mov	#-1, k2		! interrupt exception marker
 
 	.align	2
 1:	.long	EXPEVT
-2:	.long	INTEVT
 3:	.long	ret_from_irq
 4:	.long	ret_from_exception
 

arch/sh/kernel/cpu/sh3/ex.S

@@ -26,7 +26,7 @@
 #define	fpu_error_trap_handler		exception_error
 #endif
 
-#if !defined(CONFIG_KGDB_NMI)
+#if !defined(CONFIG_KGDB)
 #define kgdb_handle_exception		exception_error
 #endif
 

arch/sh/kernel/cpu/sh4/softfloat.c

@@ -37,6 +37,7 @@
  */
 #include <linux/kernel.h>
 #include <cpu/fpu.h>
+#include <asm/div64.h>
 
 #define LIT64( a ) a##LL
 
@@ -67,16 +68,16 @@ typedef unsigned long long float64;
 extern void float_raise(unsigned int flags);	/* in fpu.c */
 extern int float_rounding_mode(void);	/* in fpu.c */
 
-inline bits64 extractFloat64Frac(float64 a);
-inline flag extractFloat64Sign(float64 a);
-inline int16 extractFloat64Exp(float64 a);
-inline int16 extractFloat32Exp(float32 a);
-inline flag extractFloat32Sign(float32 a);
-inline bits32 extractFloat32Frac(float32 a);
-inline float64 packFloat64(flag zSign, int16 zExp, bits64 zSig);
-inline void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr);
-inline float32 packFloat32(flag zSign, int16 zExp, bits32 zSig);
-inline void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr);
+bits64 extractFloat64Frac(float64 a);
+flag extractFloat64Sign(float64 a);
+int16 extractFloat64Exp(float64 a);
+int16 extractFloat32Exp(float32 a);
+flag extractFloat32Sign(float32 a);
+bits32 extractFloat32Frac(float32 a);
+float64 packFloat64(flag zSign, int16 zExp, bits64 zSig);
+void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr);
+float32 packFloat32(flag zSign, int16 zExp, bits32 zSig);
+void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr);
 float64 float64_sub(float64 a, float64 b);
 float32 float32_sub(float32 a, float32 b);
 float32 float32_add(float32 a, float32 b);
@@ -86,11 +87,11 @@ float32 float32_div(float32 a, float32 b);
 float32 float32_mul(float32 a, float32 b);
 float64 float64_mul(float64 a, float64 b);
 float32 float64_to_float32(float64 a);
-inline void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
+void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
 		   bits64 * z1Ptr);
-inline void sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
+void sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
 		   bits64 * z1Ptr);
-inline void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr);
+void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr);
 
 static int8 countLeadingZeros32(bits32 a);
 static int8 countLeadingZeros64(bits64 a);
@@ -110,42 +111,42 @@ static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b);
 static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr,
 				      bits32 * zSigPtr);
 
-inline bits64 extractFloat64Frac(float64 a)
+bits64 extractFloat64Frac(float64 a)
 {
 	return a & LIT64(0x000FFFFFFFFFFFFF);
 }
 
-inline flag extractFloat64Sign(float64 a)
+flag extractFloat64Sign(float64 a)
 {
 	return a >> 63;
 }
 
-inline int16 extractFloat64Exp(float64 a)
+int16 extractFloat64Exp(float64 a)
 {
 	return (a >> 52) & 0x7FF;
 }
 
-inline int16 extractFloat32Exp(float32 a)
+int16 extractFloat32Exp(float32 a)
 {
 	return (a >> 23) & 0xFF;
 }
 
-inline flag extractFloat32Sign(float32 a)
+flag extractFloat32Sign(float32 a)
 {
 	return a >> 31;
 }
 
-inline bits32 extractFloat32Frac(float32 a)
+bits32 extractFloat32Frac(float32 a)
 {
 	return a & 0x007FFFFF;
 }
 
-inline float64 packFloat64(flag zSign, int16 zExp, bits64 zSig)
+float64 packFloat64(flag zSign, int16 zExp, bits64 zSig)
 {
 	return (((bits64) zSign) << 63) + (((bits64) zExp) << 52) + zSig;
 }
 
-inline void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr)
+void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr)
 {
 	bits64 z;
 
@@ -338,12 +339,12 @@ static float64 addFloat64Sigs(float64 a, float64 b, flag zSign)
 
 }
 
-inline float32 packFloat32(flag zSign, int16 zExp, bits32 zSig)
+float32 packFloat32(flag zSign, int16 zExp, bits32 zSig)
 {
 	return (((bits32) zSign) << 31) + (((bits32) zExp) << 23) + zSig;
 }
 
-inline void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr)
+void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr)
 {
 	bits32 z;
 	if (count == 0) {
@@ -634,7 +635,7 @@ normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr, bits64 * zSigPtr)
 	*zExpPtr = 1 - shiftCount;
 }
 
-inline void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
+void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
 		   bits64 * z1Ptr)
 {
 	bits64 z1;
@@ -644,7 +645,7 @@ inline void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
 	*z0Ptr = a0 + b0 + (z1 < a1);
 }
 
-inline void
+void
 sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
        bits64 * z1Ptr)
 {
@@ -656,11 +657,14 @@ static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b)
 {
 	bits64 b0, b1;
 	bits64 rem0, rem1, term0, term1;
-	bits64 z;
+	bits64 z, tmp;
 	if (b <= a0)
 		return LIT64(0xFFFFFFFFFFFFFFFF);
 	b0 = b >> 32;
-	z = (b0 << 32 <= a0) ? LIT64(0xFFFFFFFF00000000) : (a0 / b0) << 32;
+	tmp = a0;
+	do_div(tmp, b0);
+
+	z = (b0 << 32 <= a0) ? LIT64(0xFFFFFFFF00000000) : tmp << 32;
 	mul64To128(b, z, &term0, &term1);
 	sub128(a0, a1, term0, term1, &rem0, &rem1);
 	while (((sbits64) rem0) < 0) {
@@ -669,11 +673,13 @@ static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b)
 		add128(rem0, rem1, b0, b1, &rem0, &rem1);
 	}
 	rem0 = (rem0 << 32) | (rem1 >> 32);
-	z |= (b0 << 32 <= rem0) ? 0xFFFFFFFF : rem0 / b0;
+	tmp = rem0;
+	do_div(tmp, b0);
+	z |= (b0 << 32 <= rem0) ? 0xFFFFFFFF : tmp;
 	return z;
 }
 
-inline void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr)
+void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr)
 {
 	bits32 aHigh, aLow, bHigh, bLow;
 	bits64 z0, zMiddleA, zMiddleB, z1;
@@ -769,7 +775,8 @@ float32 float32_div(float32 a, float32 b)
 {
 	flag aSign, bSign, zSign;
 	int16 aExp, bExp, zExp;
-	bits32 aSig, bSig, zSig;
+	bits32 aSig, bSig;
+	uint64_t zSig;
 
 	aSig = extractFloat32Frac(a);
 	aExp = extractFloat32Exp(a);
@@ -804,11 +811,13 @@ float32 float32_div(float32 a, float32 b)
 		aSig >>= 1;
 		++zExp;
 	}
-	zSig = (((bits64) aSig) << 32) / bSig;
+	zSig = (((bits64) aSig) << 32);
+	do_div(zSig, bSig);
+
 	if ((zSig & 0x3F) == 0) {
 		zSig |= (((bits64) bSig) * zSig != ((bits64) aSig) << 32);
 	}
-	return roundAndPackFloat32(zSign, zExp, zSig);
+	return roundAndPackFloat32(zSign, zExp, (bits32)zSig);
 
 }
 

arch/sh/kernel/cpu/sh4a/clock-sh7722.c

@@ -229,7 +229,7 @@ struct frqcr_context sh7722_get_clk_context(const char *name)
 }
 
 /**
- * sh7722_find_divisors - find divisor for setting rate
+ * sh7722_find_div_index - find divisor for setting rate
  *
  * All sh7722 clocks use the same set of multipliers/divisors. This function
  * chooses correct divisor to set the rate of clock with parent clock that
@@ -238,7 +238,7 @@ struct frqcr_context sh7722_get_clk_context(const char *name)
  * @parent_rate: rate of parent clock
  * @rate: requested rate to be set
  */
-static int sh7722_find_divisors(unsigned long parent_rate, unsigned rate)
+static int sh7722_find_div_index(unsigned long parent_rate, unsigned rate)
 {
 	unsigned div2 = parent_rate * 2 / rate;
 	int index;
@@ -247,12 +247,12 @@ static int sh7722_find_divisors(unsigned long parent_rate, unsigned rate)
 		return -EINVAL;
 
 	for (index = 1; index < ARRAY_SIZE(divisors2); index++) {
-		if (div2 > divisors2[index] && div2 <= divisors2[index])
+		if (div2 > divisors2[index - 1] && div2 <= divisors2[index])
 			break;
 	}
 	if (index >= ARRAY_SIZE(divisors2))
 		index = ARRAY_SIZE(divisors2) - 1;
-	return divisors2[index];
+	return index;
 }
 
 static void sh7722_frqcr_recalc(struct clk *clk)
@@ -279,12 +279,12 @@ static int sh7722_frqcr_set_rate(struct clk *clk, unsigned long rate,
 		return -EINVAL;
 
 	/* look for multiplier/divisor pair */
-	div = sh7722_find_divisors(parent_rate, rate);
+	div = sh7722_find_div_index(parent_rate, rate);
 	if (div<0)
 		return div;
 
 	/* calculate new value of clock rate */
-	clk->rate = parent_rate * 2 / div;
+	clk->rate = parent_rate * 2 / divisors2[div];
 	frqcr = ctrl_inl(FRQCR);
 
 	/* FIXME: adjust as algo_id specifies */
@@ -353,7 +353,7 @@ static int sh7722_frqcr_set_rate(struct clk *clk, unsigned long rate,
 			int part_div;
 
 			if (likely(!err)) {
-				part_div = sh7722_find_divisors(parent_rate,
+				part_div = sh7722_find_div_index(parent_rate,
 								rate);
 				if (part_div > 0) {
 					part_ctx = sh7722_get_clk_context(
@@ -394,12 +394,12 @@ static long sh7722_frqcr_round_rate(struct clk *clk, unsigned long rate)
 	int div;
 
 	/* look for multiplier/divisor pair */
-	div = sh7722_find_divisors(parent_rate, rate);
+	div = sh7722_find_div_index(parent_rate, rate);
 	if (div < 0)
 		return clk->rate;
 
 	/* calculate new value of clock rate */
-	return parent_rate * 2 / div;
+	return parent_rate * 2 / divisors2[div];
 }
 
 static struct clk_ops sh7722_frqcr_clk_ops = {
@@ -421,7 +421,7 @@ static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
 	int div;
 
 	r = ctrl_inl(clk->arch_flags);
-	div = sh7722_find_divisors(clk->parent->rate, rate);
+	div = sh7722_find_div_index(clk->parent->rate, rate);
 	if (div < 0)
 		return div;
 	r = (r & ~0xF) | div;
@@ -516,16 +516,19 @@ static struct clk_ops sh7722_video_clk_ops = {
 static struct clk sh7722_umem_clock = {
 	.name = "umem_clk",
 	.ops = &sh7722_frqcr_clk_ops,
+	.flags = CLK_RATE_PROPAGATES,
 };
 
 static struct clk sh7722_sh_clock = {
 	.name = "sh_clk",
 	.ops = &sh7722_frqcr_clk_ops,
+	.flags = CLK_RATE_PROPAGATES,
 };
 
 static struct clk sh7722_peripheral_clock = {
 	.name = "peripheral_clk",
 	.ops = &sh7722_frqcr_clk_ops,
+	.flags = CLK_RATE_PROPAGATES,
 };
 
 static struct clk sh7722_sdram_clock = {
@@ -533,6 +536,11 @@ static struct clk sh7722_sdram_clock = {
 	.ops = &sh7722_frqcr_clk_ops,
 };
 
+static struct clk sh7722_r_clock = {
+	.name = "r_clk",
+	.rate = 32768,
+	.flags = CLK_RATE_PROPAGATES,
+};
 
 #ifndef CONFIG_CPU_SUBTYPE_SH7343
 
@@ -567,12 +575,30 @@ static struct clk sh7722_video_clock = {
 	.ops = &sh7722_video_clk_ops,
 };
 
-static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg,
-				    int enable)
+#define MSTPCR_ARCH_FLAGS(reg, bit) (((reg) << 8) | (bit))
+#define MSTPCR_ARCH_FLAGS_REG(value) ((value) >> 8)
+#define MSTPCR_ARCH_FLAGS_BIT(value) ((value) & 0xff)
+
+static int sh7722_mstpcr_start_stop(struct clk *clk, int enable)
 {
-	unsigned long bit = clk->arch_flags;
+	unsigned long bit = MSTPCR_ARCH_FLAGS_BIT(clk->arch_flags);
+	unsigned long reg;
 	unsigned long r;
 
+	switch(MSTPCR_ARCH_FLAGS_REG(clk->arch_flags)) {
+	case 0:
+		reg = MSTPCR0;
+		break;
+	case 1:
+		reg = MSTPCR1;
+		break;
+	case 2:
+		reg = MSTPCR2;
+		break;
+	default:
+		return -EINVAL;
+	}  
+
 	r = ctrl_inl(reg);
 
 	if (enable)
@@ -584,96 +610,175 @@ static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg,
 	return 0;
 }
 
-static void sh7722_mstpcr0_enable(struct clk *clk)
-{
-	sh7722_mstpcr_start_stop(clk, MSTPCR0, 1);
-}
-
-static void sh7722_mstpcr0_disable(struct clk *clk)
-{
-	sh7722_mstpcr_start_stop(clk, MSTPCR0, 0);
-}
-
-static void sh7722_mstpcr1_enable(struct clk *clk)
-{
-	sh7722_mstpcr_start_stop(clk, MSTPCR1, 1);
-}
-
-static void sh7722_mstpcr1_disable(struct clk *clk)
+static void sh7722_mstpcr_enable(struct clk *clk)
 {
-	sh7722_mstpcr_start_stop(clk, MSTPCR1, 0);
+	sh7722_mstpcr_start_stop(clk, 1);
 }
 
-static void sh7722_mstpcr2_enable(struct clk *clk)
+static void sh7722_mstpcr_disable(struct clk *clk)
 {
-	sh7722_mstpcr_start_stop(clk, MSTPCR2, 1);
+	sh7722_mstpcr_start_stop(clk, 0);
 }
 
-static void sh7722_mstpcr2_disable(struct clk *clk)
+static void sh7722_mstpcr_recalc(struct clk *clk)
 {
-	sh7722_mstpcr_start_stop(clk, MSTPCR2, 0);
+	if (clk->parent)
+		clk->rate = clk->parent->rate;
 }
 
-static struct clk_ops sh7722_mstpcr0_clk_ops = {
-	.enable = sh7722_mstpcr0_enable,
-	.disable = sh7722_mstpcr0_disable,
-};
-
-static struct clk_ops sh7722_mstpcr1_clk_ops = {
-	.enable = sh7722_mstpcr1_enable,
-	.disable = sh7722_mstpcr1_disable,
+static struct clk_ops sh7722_mstpcr_clk_ops = {
+	.enable = sh7722_mstpcr_enable,
+	.disable = sh7722_mstpcr_disable,
+	.recalc = sh7722_mstpcr_recalc,
 };
 
-static struct clk_ops sh7722_mstpcr2_clk_ops = {
-	.enable = sh7722_mstpcr2_enable,
-	.disable = sh7722_mstpcr2_disable,
-};
-
-#define DECLARE_MSTPCRN(regnr, bitnr, bitstr)		\
-{							\
-	.name = "mstp" __stringify(regnr) bitstr,	\
-	.arch_flags = bitnr,				\
-	.ops = &sh7722_mstpcr ## regnr ## _clk_ops,	\
+#define MSTPCR(_name, _parent, regnr, bitnr) \
+{						\
+	.name = _name,				\
+	.arch_flags = MSTPCR_ARCH_FLAGS(regnr, bitnr),	\
+	.ops = (void *)_parent,		\
 }
 
-#define DECLARE_MSTPCR(regnr) \
-	DECLARE_MSTPCRN(regnr, 31, "31"), \
-	DECLARE_MSTPCRN(regnr, 30, "30"), \
-	DECLARE_MSTPCRN(regnr, 29, "29"), \
-	DECLARE_MSTPCRN(regnr, 28, "28"), \
-	DECLARE_MSTPCRN(regnr, 27, "27"), \
-	DECLARE_MSTPCRN(regnr, 26, "26"), \
-	DECLARE_MSTPCRN(regnr, 25, "25"), \
-	DECLARE_MSTPCRN(regnr, 24, "24"), \
-	DECLARE_MSTPCRN(regnr, 23, "23"), \
-	DECLARE_MSTPCRN(regnr, 22, "22"), \
-	DECLARE_MSTPCRN(regnr, 21, "21"), \
-	DECLARE_MSTPCRN(regnr, 20, "20"), \
-	DECLARE_MSTPCRN(regnr, 19, "19"), \
-	DECLARE_MSTPCRN(regnr, 18, "18"), \
-	DECLARE_MSTPCRN(regnr, 17, "17"), \
-	DECLARE_MSTPCRN(regnr, 16, "16"), \
-	DECLARE_MSTPCRN(regnr, 15, "15"), \
-	DECLARE_MSTPCRN(regnr, 14, "14"), \
-	DECLARE_MSTPCRN(regnr, 13, "13"), \
-	DECLARE_MSTPCRN(regnr, 12, "12"), \
-	DECLARE_MSTPCRN(regnr, 11, "11"), \
-	DECLARE_MSTPCRN(regnr, 10, "10"), \
-	DECLARE_MSTPCRN(regnr, 9, "09"), \
-	DECLARE_MSTPCRN(regnr, 8, "08"), \
-	DECLARE_MSTPCRN(regnr, 7, "07"), \
-	DECLARE_MSTPCRN(regnr, 6, "06"), \
-	DECLARE_MSTPCRN(regnr, 5, "05"), \
-	DECLARE_MSTPCRN(regnr, 4, "04"), \
-	DECLARE_MSTPCRN(regnr, 3, "03"), \
-	DECLARE_MSTPCRN(regnr, 2, "02"), \
-	DECLARE_MSTPCRN(regnr, 1, "01"), \
-	DECLARE_MSTPCRN(regnr, 0, "00")
-
-static struct clk sh7722_mstpcr[] = {
-	DECLARE_MSTPCR(0),
-	DECLARE_MSTPCR(1),
-	DECLARE_MSTPCR(2),
+static struct clk sh7722_mstpcr_clocks[] = {
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
+	MSTPCR("uram0", "umem_clk", 0, 28),
+	MSTPCR("xymem0", "bus_clk", 0, 26),
+	MSTPCR("tmu0", "peripheral_clk", 0, 15),
+	MSTPCR("cmt0", "r_clk", 0, 14),
+	MSTPCR("rwdt0", "r_clk", 0, 13),
+	MSTPCR("flctl0", "peripheral_clk", 0, 10),
+	MSTPCR("scif0", "peripheral_clk", 0, 7),
+	MSTPCR("scif1", "peripheral_clk", 0, 6),
+	MSTPCR("scif2", "peripheral_clk", 0, 5),
+	MSTPCR("i2c0", "peripheral_clk", 1, 9),
+	MSTPCR("rtc0", "r_clk", 1, 8),
+	MSTPCR("sdhi0", "peripheral_clk", 2, 18),
+	MSTPCR("keysc0", "r_clk", 2, 14),
+	MSTPCR("usbf0", "peripheral_clk", 2, 11),
+	MSTPCR("2dg0", "bus_clk", 2, 9),
+	MSTPCR("siu0", "bus_clk", 2, 8),
+	MSTPCR("vou0", "bus_clk", 2, 5),
+	MSTPCR("jpu0", "bus_clk", 2, 6),
+	MSTPCR("beu0", "bus_clk", 2, 4),
+	MSTPCR("ceu0", "bus_clk", 2, 3),
+	MSTPCR("veu0", "bus_clk", 2, 2),
+	MSTPCR("vpu0", "bus_clk", 2, 1),
+	MSTPCR("lcdc0", "bus_clk", 2, 0),
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)
+	/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
+	MSTPCR("tlb0", "cpu_clk", 0, 31),
+	MSTPCR("ic0", "cpu_clk", 0, 30),
+	MSTPCR("oc0", "cpu_clk", 0, 29),
+	MSTPCR("l2c0", "sh_clk", 0, 28),
+	MSTPCR("ilmem0", "cpu_clk", 0, 27),
+	MSTPCR("fpu0", "cpu_clk", 0, 24),
+	MSTPCR("intc0", "cpu_clk", 0, 22),
+	MSTPCR("dmac0", "bus_clk", 0, 21),
+	MSTPCR("sh0", "sh_clk", 0, 20),
+	MSTPCR("hudi0", "peripheral_clk", 0, 19),
+	MSTPCR("ubc0", "cpu_clk", 0, 17),
+	MSTPCR("tmu0", "peripheral_clk", 0, 15),
+	MSTPCR("cmt0", "r_clk", 0, 14),
+	MSTPCR("rwdt0", "r_clk", 0, 13),
+	MSTPCR("dmac1", "bus_clk", 0, 12),
+	MSTPCR("tmu1", "peripheral_clk", 0, 11),
+	MSTPCR("flctl0", "peripheral_clk", 0, 10),
+	MSTPCR("scif0", "peripheral_clk", 0, 9),
+	MSTPCR("scif1", "peripheral_clk", 0, 8),
+	MSTPCR("scif2", "peripheral_clk", 0, 7),
+	MSTPCR("scif3", "bus_clk", 0, 6),
+	MSTPCR("scif4", "bus_clk", 0, 5),
+	MSTPCR("scif5", "bus_clk", 0, 4),
+	MSTPCR("msiof0", "bus_clk", 0, 2),
+	MSTPCR("msiof1", "bus_clk", 0, 1),
+	MSTPCR("meram0", "sh_clk", 0, 0),
+	MSTPCR("i2c0", "peripheral_clk", 1, 9),
+	MSTPCR("rtc0", "r_clk", 1, 8),
+	MSTPCR("atapi0", "sh_clk", 2, 28),
+	MSTPCR("adc0", "peripheral_clk", 2, 28),
+	MSTPCR("tpu0", "bus_clk", 2, 25),
+	MSTPCR("irda0", "peripheral_clk", 2, 24),
+	MSTPCR("tsif0", "bus_clk", 2, 22),
+	MSTPCR("icb0", "bus_clk", 2, 21),
+	MSTPCR("sdhi0", "bus_clk", 2, 18),
+	MSTPCR("sdhi1", "bus_clk", 2, 17),
+	MSTPCR("keysc0", "r_clk", 2, 14),
+	MSTPCR("usb0", "bus_clk", 2, 11),
+	MSTPCR("2dg0", "bus_clk", 2, 10),
+	MSTPCR("siu0", "bus_clk", 2, 8),
+	MSTPCR("veu1", "bus_clk", 2, 6),
+	MSTPCR("vou0", "bus_clk", 2, 5),
+	MSTPCR("beu0", "bus_clk", 2, 4),
+	MSTPCR("ceu0", "bus_clk", 2, 3),
+	MSTPCR("veu0", "bus_clk", 2, 2),
+	MSTPCR("vpu0", "bus_clk", 2, 1),
+	MSTPCR("lcdc0", "bus_clk", 2, 0),
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7343)
+	MSTPCR("uram0", "umem_clk", 0, 28),
+	MSTPCR("xymem0", "bus_clk", 0, 26),
+	MSTPCR("tmu0", "peripheral_clk", 0, 15),
+	MSTPCR("cmt0", "r_clk", 0, 14),
+	MSTPCR("rwdt0", "r_clk", 0, 13),
+	MSTPCR("scif0", "peripheral_clk", 0, 7),
+	MSTPCR("scif1", "peripheral_clk", 0, 6),
+	MSTPCR("scif2", "peripheral_clk", 0, 5),
+	MSTPCR("scif3", "peripheral_clk", 0, 4),
+	MSTPCR("i2c0", "peripheral_clk", 1, 9),
+	MSTPCR("i2c1", "peripheral_clk", 1, 8),
+	MSTPCR("sdhi0", "peripheral_clk", 2, 18),
+	MSTPCR("keysc0", "r_clk", 2, 14),
+	MSTPCR("usbf0", "peripheral_clk", 2, 11),
+	MSTPCR("siu0", "bus_clk", 2, 8),
+	MSTPCR("jpu0", "bus_clk", 2, 6),
+	MSTPCR("vou0", "bus_clk", 2, 5),
+	MSTPCR("beu0", "bus_clk", 2, 4),
+	MSTPCR("ceu0", "bus_clk", 2, 3),
+	MSTPCR("veu0", "bus_clk", 2, 2),
+	MSTPCR("vpu0", "bus_clk", 2, 1),
+	MSTPCR("lcdc0", "bus_clk", 2, 0),
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7366)
+	/* See page 52 of Datasheet V0.40: Overview -> Block Diagram */
+	MSTPCR("tlb0", "cpu_clk", 0, 31),
+	MSTPCR("ic0", "cpu_clk", 0, 30),
+	MSTPCR("oc0", "cpu_clk", 0, 29),
+	MSTPCR("rsmem0", "sh_clk", 0, 28),
+	MSTPCR("xymem0", "cpu_clk", 0, 26),
+	MSTPCR("intc30", "peripheral_clk", 0, 23),
+	MSTPCR("intc0", "peripheral_clk", 0, 22),
+	MSTPCR("dmac0", "bus_clk", 0, 21),
+	MSTPCR("sh0", "sh_clk", 0, 20),
+	MSTPCR("hudi0", "peripheral_clk", 0, 19),
+	MSTPCR("ubc0", "cpu_clk", 0, 17),
+	MSTPCR("tmu0", "peripheral_clk", 0, 15),
+	MSTPCR("cmt0", "r_clk", 0, 14),
+	MSTPCR("rwdt0", "r_clk", 0, 13),
+	MSTPCR("flctl0", "peripheral_clk", 0, 10),
+	MSTPCR("scif0", "peripheral_clk", 0, 7),
+	MSTPCR("scif1", "bus_clk", 0, 6),
+	MSTPCR("scif2", "bus_clk", 0, 5),
+	MSTPCR("msiof0", "peripheral_clk", 0, 2),
+	MSTPCR("sbr0", "peripheral_clk", 0, 1),
+	MSTPCR("i2c0", "peripheral_clk", 1, 9),
+	MSTPCR("icb0", "bus_clk", 2, 27),
+	MSTPCR("meram0", "sh_clk", 2, 26),
+	MSTPCR("dacc0", "peripheral_clk", 2, 24),
+	MSTPCR("dacy0", "peripheral_clk", 2, 23),
+	MSTPCR("tsif0", "bus_clk", 2, 22),
+	MSTPCR("sdhi0", "bus_clk", 2, 18),
+	MSTPCR("mmcif0", "bus_clk", 2, 17),
+	MSTPCR("usb0", "bus_clk", 2, 11),
+	MSTPCR("siu0", "bus_clk", 2, 8),
+	MSTPCR("veu1", "bus_clk", 2, 7),
+	MSTPCR("vou0", "bus_clk", 2, 5),
+	MSTPCR("beu0", "bus_clk", 2, 4),
+	MSTPCR("ceu0", "bus_clk", 2, 3),
+	MSTPCR("veu0", "bus_clk", 2, 2),
+	MSTPCR("vpu0", "bus_clk", 2, 1),
+	MSTPCR("lcdc0", "bus_clk", 2, 0),
+#endif
 };
 
 static struct clk *sh7722_clocks[] = {
@@ -710,21 +815,30 @@ arch_init_clk_ops(struct clk_ops **ops, int type)
 
 int __init arch_clk_init(void)
 {
-	struct clk *master;
+	struct clk *clk;
 	int i;
 
-	master = clk_get(NULL, "master_clk");
+	clk = clk_get(NULL, "master_clk");
 	for (i = 0; i < ARRAY_SIZE(sh7722_clocks); i++) {
 		pr_debug( "Registering clock '%s'\n", sh7722_clocks[i]->name);
-		sh7722_clocks[i]->parent = master;
+		sh7722_clocks[i]->parent = clk;
 		clk_register(sh7722_clocks[i]);
 	}
-	clk_put(master);
-
-	for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) {
-		pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name);
-		clk_register(&sh7722_mstpcr[i]);
+	clk_put(clk);
+
+	clk_register(&sh7722_r_clock);
+
+	for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr_clocks); i++) {
+		pr_debug( "Registering mstpcr clock '%s'\n",
+			  sh7722_mstpcr_clocks[i].name);
+		clk = clk_get(NULL, (void *) sh7722_mstpcr_clocks[i].ops);
+		sh7722_mstpcr_clocks[i].parent = clk;
+		sh7722_mstpcr_clocks[i].ops = &sh7722_mstpcr_clk_ops;
+		clk_register(&sh7722_mstpcr_clocks[i]);
+		clk_put(clk);
 	}
 
+	clk_recalc_rate(&sh7722_r_clock); /* make sure rate gets propagated */
+
 	return 0;
 }

arch/sh/kernel/cpu/sh4a/setup-sh7343.c

@@ -30,6 +30,7 @@ static struct resource iic0_resources[] = {
 
 static struct platform_device iic0_device = {
 	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic0_resources),
 	.resource       = iic0_resources,
 };
@@ -50,6 +51,7 @@ static struct resource iic1_resources[] = {
 
 static struct platform_device iic1_device = {
 	.name           = "i2c-sh_mobile",
+	.id             = 1, /* "i2c1" clock */
 	.num_resources  = ARRAY_SIZE(iic1_resources),
 	.resource       = iic1_resources,
 };
@@ -115,7 +117,22 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xffe00000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 80, 81, 83, 82 },
+		.irqs		= { 80, 80, 80, 80 },
+	}, {
+		.mapbase	= 0xffe10000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 81, 81, 81, 81 },
+	}, {
+		.mapbase	= 0xffe20000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 82, 82, 82, 82 },
+	}, {
+		.mapbase	= 0xffe30000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 83, 83, 83, 83 },
 	}, {
 		.flags = 0,
 	}
@@ -139,18 +156,10 @@ static struct platform_device *sh7343_devices[] __initdata = {
 
 static int __init sh7343_devices_setup(void)
 {
-	clk_always_enable("mstp031"); /* TLB */
-	clk_always_enable("mstp030"); /* IC */
-	clk_always_enable("mstp029"); /* OC */
-	clk_always_enable("mstp028"); /* URAM */
-	clk_always_enable("mstp026"); /* XYMEM */
-	clk_always_enable("mstp023"); /* INTC3 */
-	clk_always_enable("mstp022"); /* INTC */
-	clk_always_enable("mstp020"); /* SuperHyway */
-	clk_always_enable("mstp109"); /* I2C0 */
-	clk_always_enable("mstp108"); /* I2C1 */
-	clk_always_enable("mstp202"); /* VEU */
-	clk_always_enable("mstp201"); /* VPU */
+	clk_always_enable("uram0"); /* URAM */
+	clk_always_enable("xymem0"); /* XYMEM */
+	clk_always_enable("veu0"); /* VEU */
+	clk_always_enable("vpu0"); /* VPU */
 
 	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
 	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
@@ -171,7 +180,7 @@ enum {
 	MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
 	DMAC4, DMAC5, DMAC_DADERR,
 	KEYSC,
-	SCIF, SCIF1, SCIF2, SCIF3, SCIF4,
+	SCIF, SCIF1, SCIF2, SCIF3,
 	SIOF0, SIOF1, SIO,
 	FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
 	I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,

arch/sh/kernel/cpu/sh4a/setup-sh7366.c

@@ -32,6 +32,7 @@ static struct resource iic_resources[] = {
 
 static struct platform_device iic_device = {
 	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic_resources),
 	.resource       = iic_resources,
 };
@@ -176,19 +177,11 @@ static struct platform_device *sh7366_devices[] __initdata = {
 
 static int __init sh7366_devices_setup(void)
 {
-	clk_always_enable("mstp031"); /* TLB */
-	clk_always_enable("mstp030"); /* IC */
-	clk_always_enable("mstp029"); /* OC */
-	clk_always_enable("mstp028"); /* RSMEM */
-	clk_always_enable("mstp026"); /* XYMEM */
-	clk_always_enable("mstp023"); /* INTC3 */
-	clk_always_enable("mstp022"); /* INTC */
-	clk_always_enable("mstp020"); /* SuperHyway */
-	clk_always_enable("mstp109"); /* I2C */
-	clk_always_enable("mstp211"); /* USB */
-	clk_always_enable("mstp207"); /* VEU-2 */
-	clk_always_enable("mstp202"); /* VEU-1 */
-	clk_always_enable("mstp201"); /* VPU */
+	clk_always_enable("rsmem0"); /* RSMEM */
+	clk_always_enable("xymem0"); /* XYMEM */
+	clk_always_enable("veu1"); /* VEU-2 */
+	clk_always_enable("veu0"); /* VEU-1 */
+	clk_always_enable("vpu0"); /* VPU */
 
 	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
 	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);

arch/sh/kernel/cpu/sh4a/setup-sh7722.c

@@ -62,7 +62,7 @@ static struct resource usbf_resources[] = {
 
 static struct platform_device usbf_device = {
 	.name		= "m66592_udc",
-	.id		= -1,
+	.id             = 0, /* "usbf0" clock */
 	.dev = {
 		.dma_mask		= NULL,
 		.coherent_dma_mask	= 0xffffffff,
@@ -87,6 +87,7 @@ static struct resource iic_resources[] = {
 
 static struct platform_device iic_device = {
 	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic_resources),
 	.resource       = iic_resources,
 };
@@ -147,6 +148,34 @@ static struct platform_device veu_device = {
 	.num_resources	= ARRAY_SIZE(veu_resources),
 };
 
+static struct uio_info jpu_platform_data = {
+	.name = "JPU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource jpu_resources[] = {
+	[0] = {
+		.name	= "JPU",
+		.start	= 0xfea00000,
+		.end	= 0xfea102d0,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device jpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &jpu_platform_data,
+	},
+	.resource	= jpu_resources,
+	.num_resources	= ARRAY_SIZE(jpu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -186,24 +215,21 @@ static struct platform_device *sh7722_devices[] __initdata = {
 	&sci_device,
 	&vpu_device,
 	&veu_device,
+	&jpu_device,
 };
 
 static int __init sh7722_devices_setup(void)
 {
-	clk_always_enable("mstp031"); /* TLB */
-	clk_always_enable("mstp030"); /* IC */
-	clk_always_enable("mstp029"); /* OC */
-	clk_always_enable("mstp028"); /* URAM */
-	clk_always_enable("mstp026"); /* XYMEM */
-	clk_always_enable("mstp022"); /* INTC */
-	clk_always_enable("mstp020"); /* SuperHyway */
-	clk_always_enable("mstp109"); /* I2C */
-	clk_always_enable("mstp211"); /* USB */
-	clk_always_enable("mstp202"); /* VEU */
-	clk_always_enable("mstp201"); /* VPU */
+	clk_always_enable("uram0"); /* URAM */
+	clk_always_enable("xymem0"); /* XYMEM */
+	clk_always_enable("rtc0"); /* RTC */
+	clk_always_enable("veu0"); /* VEU */
+	clk_always_enable("vpu0"); /* VPU */
+	clk_always_enable("jpu0"); /* JPU */
 
 	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
 	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+	platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
 
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));

arch/sh/kernel/cpu/sh4a/setup-sh7723.c

@@ -215,6 +215,7 @@ static struct resource iic_resources[] = {
 
 static struct platform_device iic_device = {
 	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic_resources),
 	.resource       = iic_resources,
 };
@@ -231,19 +232,11 @@ static struct platform_device *sh7723_devices[] __initdata = {
 
 static int __init sh7723_devices_setup(void)
 {
-	clk_always_enable("mstp031"); /* TLB */
-	clk_always_enable("mstp030"); /* IC */
-	clk_always_enable("mstp029"); /* OC */
-	clk_always_enable("mstp024"); /* FPU */
-	clk_always_enable("mstp022"); /* INTC */
-	clk_always_enable("mstp020"); /* SuperHyway */
-	clk_always_enable("mstp000"); /* MERAM */
-	clk_always_enable("mstp109"); /* I2C */
-	clk_always_enable("mstp108"); /* RTC */
-	clk_always_enable("mstp211"); /* USB */
-	clk_always_enable("mstp206"); /* VEU2H1 */
-	clk_always_enable("mstp202"); /* VEU2H0 */
-	clk_always_enable("mstp201"); /* VPU */
+	clk_always_enable("meram0"); /* MERAM */
+	clk_always_enable("rtc0"); /* RTC */
+	clk_always_enable("veu1"); /* VEU2H1 */
+	clk_always_enable("veu0"); /* VEU2H0 */
+	clk_always_enable("vpu0"); /* VPU */
 
 	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
 	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);

arch/sh/kernel/debugtraps.S

@@ -3,7 +3,7 @@
  *
  * Debug trap jump tables for SuperH
  *
- *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,12 +12,13 @@
 #include <linux/sys.h>
 #include <linux/linkage.h>
 
-#if !defined(CONFIG_SH_KGDB)
-#define kgdb_handle_exception	debug_trap_handler
+#if !defined(CONFIG_KGDB)
+#define breakpoint_trap_handler		debug_trap_handler
+#define singlestep_trap_handler		debug_trap_handler
 #endif
 
 #if !defined(CONFIG_SH_STANDARD_BIOS)
-#define sh_bios_handler		debug_trap_handler
+#define sh_bios_handler			debug_trap_handler
 #endif
 
 	.data
@@ -35,7 +36,7 @@ ENTRY(debug_trap_table)
 	.long debug_trap_handler	/* 0x39 */
 	.long debug_trap_handler	/* 0x3a */
 	.long debug_trap_handler	/* 0x3b */
-	.long kgdb_handle_exception	/* 0x3c */
-	.long debug_trap_handler	/* 0x3d */
+	.long breakpoint_trap_handler	/* 0x3c */
+	.long singlestep_trap_handler	/* 0x3d */
 	.long bug_trap_handler		/* 0x3e */
 	.long sh_bios_handler		/* 0x3f */

arch/sh/kernel/disassemble.c

@@ -0,0 +1,573 @@
+/*
+ * Disassemble SuperH instructions.
+ *
+ * Copyright (C) 1999 kaz Kojima
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+
+/*
+ * Format of an instruction in memory.
+ */
+typedef enum {
+	HEX_0, HEX_1, HEX_2, HEX_3, HEX_4, HEX_5, HEX_6, HEX_7,
+	HEX_8, HEX_9, HEX_A, HEX_B, HEX_C, HEX_D, HEX_E, HEX_F,
+	REG_N, REG_M, REG_NM, REG_B,
+	BRANCH_12, BRANCH_8,
+	DISP_8, DISP_4,
+	IMM_4, IMM_4BY2, IMM_4BY4, PCRELIMM_8BY2, PCRELIMM_8BY4,
+	IMM_8, IMM_8BY2, IMM_8BY4,
+} sh_nibble_type;
+
+typedef enum {
+	A_END, A_BDISP12, A_BDISP8,
+	A_DEC_M, A_DEC_N,
+	A_DISP_GBR, A_DISP_PC, A_DISP_REG_M, A_DISP_REG_N,
+	A_GBR,
+	A_IMM,
+	A_INC_M, A_INC_N,
+	A_IND_M, A_IND_N, A_IND_R0_REG_M, A_IND_R0_REG_N,
+	A_MACH, A_MACL,
+	A_PR, A_R0, A_R0_GBR, A_REG_M, A_REG_N, A_REG_B,
+	A_SR, A_VBR, A_SSR, A_SPC, A_SGR, A_DBR,
+	F_REG_N, F_REG_M, D_REG_N, D_REG_M,
+	X_REG_N, /* Only used for argument parsing */
+	X_REG_M, /* Only used for argument parsing */
+	DX_REG_N, DX_REG_M, V_REG_N, V_REG_M,
+	FD_REG_N,
+	XMTRX_M4,
+	F_FR0,
+	FPUL_N, FPUL_M, FPSCR_N, FPSCR_M,
+} sh_arg_type;
+
+static struct sh_opcode_info {
+	char *name;
+	sh_arg_type arg[7];
+	sh_nibble_type nibbles[4];
+} sh_table[] = {
+	{"add",{A_IMM,A_REG_N},{HEX_7,REG_N,IMM_8}},
+	{"add",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_C}},
+	{"addc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_E}},
+	{"addv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_F}},
+	{"and",{A_IMM,A_R0},{HEX_C,HEX_9,IMM_8}},
+	{"and",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_9}},
+	{"and.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_D,IMM_8}},
+	{"bra",{A_BDISP12},{HEX_A,BRANCH_12}},
+	{"bsr",{A_BDISP12},{HEX_B,BRANCH_12}},
+	{"bt",{A_BDISP8},{HEX_8,HEX_9,BRANCH_8}},
+	{"bf",{A_BDISP8},{HEX_8,HEX_B,BRANCH_8}},
+	{"bt.s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
+	{"bt/s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
+	{"bf.s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
+	{"bf/s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
+	{"clrmac",{0},{HEX_0,HEX_0,HEX_2,HEX_8}},
+	{"clrs",{0},{HEX_0,HEX_0,HEX_4,HEX_8}},
+	{"clrt",{0},{HEX_0,HEX_0,HEX_0,HEX_8}},
+	{"cmp/eq",{A_IMM,A_R0},{HEX_8,HEX_8,IMM_8}},
+	{"cmp/eq",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_0}},
+	{"cmp/ge",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_3}},
+	{"cmp/gt",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_7}},
+	{"cmp/hi",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_6}},
+	{"cmp/hs",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_2}},
+	{"cmp/pl",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_5}},
+	{"cmp/pz",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_1}},
+	{"cmp/str",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_C}},
+	{"div0s",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_7}},
+	{"div0u",{0},{HEX_0,HEX_0,HEX_1,HEX_9}},
+	{"div1",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_4}},
+	{"exts.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_E}},
+	{"exts.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_F}},
+	{"extu.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_C}},
+	{"extu.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_D}},
+	{"jmp",{A_IND_N},{HEX_4,REG_N,HEX_2,HEX_B}},
+	{"jsr",{A_IND_N},{HEX_4,REG_N,HEX_0,HEX_B}},
+	{"ldc",{A_REG_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_E}},
+	{"ldc",{A_REG_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_E}},
+	{"ldc",{A_REG_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_E}},
+	{"ldc",{A_REG_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_E}},
+	{"ldc",{A_REG_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_E}},
+	{"ldc",{A_REG_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_E}},
+	{"ldc",{A_REG_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_E}},
+	{"ldc.l",{A_INC_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_7}},
+	{"ldc.l",{A_INC_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_7}},
+	{"ldc.l",{A_INC_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_7}},
+	{"ldc.l",{A_INC_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_7}},
+	{"ldc.l",{A_INC_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_7}},
+	{"ldc.l",{A_INC_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_7}},
+	{"ldc.l",{A_INC_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_7}},
+	{"lds",{A_REG_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_A}},
+	{"lds",{A_REG_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_A}},
+	{"lds",{A_REG_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_A}},
+	{"lds",{A_REG_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_A}},
+	{"lds",{A_REG_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_A}},
+	{"lds.l",{A_INC_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_6}},
+	{"lds.l",{A_INC_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_6}},
+	{"lds.l",{A_INC_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_6}},
+	{"lds.l",{A_INC_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_6}},
+	{"lds.l",{A_INC_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_6}},
+	{"ldtlb",{0},{HEX_0,HEX_0,HEX_3,HEX_8}},
+	{"mac.w",{A_INC_M,A_INC_N},{HEX_4,REG_N,REG_M,HEX_F}},
+	{"mov",{A_IMM,A_REG_N},{HEX_E,REG_N,IMM_8}},
+	{"mov",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_3}},
+	{"mov.b",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_4}},
+	{"mov.b",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_4}},
+	{"mov.b",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_0}},
+	{"mov.b",{A_DISP_REG_M,A_R0},{HEX_8,HEX_4,REG_M,IMM_4}},
+	{"mov.b",{A_DISP_GBR,A_R0},{HEX_C,HEX_4,IMM_8}},
+	{"mov.b",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_C}},
+	{"mov.b",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_4}},
+	{"mov.b",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_0}},
+	{"mov.b",{A_R0,A_DISP_REG_M},{HEX_8,HEX_0,REG_M,IMM_4}},
+	{"mov.b",{A_R0,A_DISP_GBR},{HEX_C,HEX_0,IMM_8}},
+	{"mov.l",{ A_REG_M,A_DISP_REG_N},{HEX_1,REG_N,REG_M,IMM_4BY4}},
+	{"mov.l",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_6}},
+	{"mov.l",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_6}},
+	{"mov.l",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_2}},
+	{"mov.l",{A_DISP_REG_M,A_REG_N},{HEX_5,REG_N,REG_M,IMM_4BY4}},
+	{"mov.l",{A_DISP_GBR,A_R0},{HEX_C,HEX_6,IMM_8BY4}},
+	{"mov.l",{A_DISP_PC,A_REG_N},{HEX_D,REG_N,PCRELIMM_8BY4}},
+	{"mov.l",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_E}},
+	{"mov.l",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_6}},
+	{"mov.l",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_2}},
+	{"mov.l",{A_R0,A_DISP_GBR},{HEX_C,HEX_2,IMM_8BY4}},
+	{"mov.w",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_5}},
+	{"mov.w",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_5}},
+	{"mov.w",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_1}},
+	{"mov.w",{A_DISP_REG_M,A_R0},{HEX_8,HEX_5,REG_M,IMM_4BY2}},
+	{"mov.w",{A_DISP_GBR,A_R0},{HEX_C,HEX_5,IMM_8BY2}},
+	{"mov.w",{A_DISP_PC,A_REG_N},{HEX_9,REG_N,PCRELIMM_8BY2}},
+	{"mov.w",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_D}},
+	{"mov.w",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_5}},
+	{"mov.w",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_1}},
+	{"mov.w",{A_R0,A_DISP_REG_M},{HEX_8,HEX_1,REG_M,IMM_4BY2}},
+	{"mov.w",{A_R0,A_DISP_GBR},{HEX_C,HEX_1,IMM_8BY2}},
+	{"mova",{A_DISP_PC,A_R0},{HEX_C,HEX_7,PCRELIMM_8BY4}},
+	{"movca.l",{A_R0,A_IND_N},{HEX_0,REG_N,HEX_C,HEX_3}},
+	{"movt",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_9}},
+	{"muls",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_F}},
+	{"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
+	{"mulu",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_E}},
+	{"neg",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_B}},
+	{"negc",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_A}},
+	{"nop",{0},{HEX_0,HEX_0,HEX_0,HEX_9}},
+	{"not",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_7}},
+	{"ocbi",{A_IND_N},{HEX_0,REG_N,HEX_9,HEX_3}},
+	{"ocbp",{A_IND_N},{HEX_0,REG_N,HEX_A,HEX_3}},
+	{"ocbwb",{A_IND_N},{HEX_0,REG_N,HEX_B,HEX_3}},
+	{"or",{A_IMM,A_R0},{HEX_C,HEX_B,IMM_8}},
+	{"or",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_B}},
+	{"or.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_F,IMM_8}},
+	{"pref",{A_IND_N},{HEX_0,REG_N,HEX_8,HEX_3}},
+	{"rotcl",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_4}},
+	{"rotcr",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_5}},
+	{"rotl",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_4}},
+	{"rotr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_5}},
+	{"rte",{0},{HEX_0,HEX_0,HEX_2,HEX_B}},
+	{"rts",{0},{HEX_0,HEX_0,HEX_0,HEX_B}},
+	{"sets",{0},{HEX_0,HEX_0,HEX_5,HEX_8}},
+	{"sett",{0},{HEX_0,HEX_0,HEX_1,HEX_8}},
+	{"shad",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_C}},
+	{"shld",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_D}},
+	{"shal",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_0}},
+	{"shar",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_1}},
+	{"shll",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_0}},
+	{"shll16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_8}},
+	{"shll2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_8}},
+	{"shll8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_8}},
+	{"shlr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_1}},
+	{"shlr16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_9}},
+	{"shlr2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_9}},
+	{"shlr8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_9}},
+	{"sleep",{0},{HEX_0,HEX_0,HEX_1,HEX_B}},
+	{"stc",{A_SR,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_2}},
+	{"stc",{A_GBR,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_2}},
+	{"stc",{A_VBR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_2}},
+	{"stc",{A_SSR,A_REG_N},{HEX_0,REG_N,HEX_3,HEX_2}},
+	{"stc",{A_SPC,A_REG_N},{HEX_0,REG_N,HEX_4,HEX_2}},
+	{"stc",{A_SGR,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_2}},
+	{"stc",{A_DBR,A_REG_N},{HEX_0,REG_N,HEX_7,HEX_2}},
+	{"stc",{A_REG_B,A_REG_N},{HEX_0,REG_N,REG_B,HEX_2}},
+	{"stc.l",{A_SR,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_3}},
+	{"stc.l",{A_GBR,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_3}},
+	{"stc.l",{A_VBR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_3}},
+	{"stc.l",{A_SSR,A_DEC_N},{HEX_4,REG_N,HEX_3,HEX_3}},
+	{"stc.l",{A_SPC,A_DEC_N},{HEX_4,REG_N,HEX_4,HEX_3}},
+	{"stc.l",{A_SGR,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_3}},
+	{"stc.l",{A_DBR,A_DEC_N},{HEX_4,REG_N,HEX_7,HEX_3}},
+	{"stc.l",{A_REG_B,A_DEC_N},{HEX_4,REG_N,REG_B,HEX_3}},
+	{"sts",{A_MACH,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_A}},
+	{"sts",{A_MACL,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_A}},
+	{"sts",{A_PR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_A}},
+	{"sts",{FPUL_M,A_REG_N},{HEX_0,REG_N,HEX_5,HEX_A}},
+	{"sts",{FPSCR_M,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_A}},
+	{"sts.l",{A_MACH,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_2}},
+	{"sts.l",{A_MACL,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_2}},
+	{"sts.l",{A_PR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_2}},
+	{"sts.l",{FPUL_M,A_DEC_N},{HEX_4,REG_N,HEX_5,HEX_2}},
+	{"sts.l",{FPSCR_M,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_2}},
+	{"sub",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_8}},
+	{"subc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_A}},
+	{"subv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_B}},
+	{"swap.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_8}},
+	{"swap.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_9}},
+	{"tas.b",{A_IND_N},{HEX_4,REG_N,HEX_1,HEX_B}},
+	{"trapa",{A_IMM},{HEX_C,HEX_3,IMM_8}},
+	{"tst",{A_IMM,A_R0},{HEX_C,HEX_8,IMM_8}},
+	{"tst",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_8}},
+	{"tst.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_C,IMM_8}},
+	{"xor",{A_IMM,A_R0},{HEX_C,HEX_A,IMM_8}},
+	{"xor",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_A}},
+	{"xor.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_E,IMM_8}},
+	{"xtrct",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_D}},
+	{"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
+	{"dt",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_0}},
+	{"dmuls.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_D}},
+	{"dmulu.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_5}},
+	{"mac.l",{A_INC_M,A_INC_N},{HEX_0,REG_N,REG_M,HEX_F}},
+	{"braf",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_3}},
+	{"bsrf",{A_REG_N},{HEX_0,REG_N,HEX_0,HEX_3}},
+	{"fabs",{FD_REG_N},{HEX_F,REG_N,HEX_5,HEX_D}},
+	{"fadd",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
+	{"fadd",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
+	{"fcmp/eq",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
+	{"fcmp/eq",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
+	{"fcmp/gt",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
+	{"fcmp/gt",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
+	{"fcnvds",{D_REG_N,FPUL_M},{HEX_F,REG_N,HEX_B,HEX_D}},
+	{"fcnvsd",{FPUL_M,D_REG_N},{HEX_F,REG_N,HEX_A,HEX_D}},
+	{"fdiv",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
+	{"fdiv",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
+	{"fipr",{V_REG_M,V_REG_N},{HEX_F,REG_NM,HEX_E,HEX_D}},
+	{"fldi0",{F_REG_N},{HEX_F,REG_N,HEX_8,HEX_D}},
+	{"fldi1",{F_REG_N},{HEX_F,REG_N,HEX_9,HEX_D}},
+	{"flds",{F_REG_N,FPUL_M},{HEX_F,REG_N,HEX_1,HEX_D}},
+	{"float",{FPUL_M,FD_REG_N},{HEX_F,REG_N,HEX_2,HEX_D}},
+	{"fmac",{F_FR0,F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_E}},
+	{"fmov",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
+	{"fmov",{DX_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
+	{"fmov",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
+	{"fmov",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
+	{"fmov",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
+	{"fmov",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
+	{"fmov",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
+	{"fmov",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
+	{"fmov",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
+	{"fmov",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
+	{"fmov",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
+	{"fmov",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
+	{"fmov",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
+	{"fmov",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
+	{"fmov.d",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
+	{"fmov.d",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
+	{"fmov.d",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
+	{"fmov.d",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
+	{"fmov.d",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
+	{"fmov.d",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
+	{"fmov.s",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
+	{"fmov.s",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
+	{"fmov.s",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
+	{"fmov.s",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
+	{"fmov.s",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
+	{"fmov.s",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
+	{"fmul",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
+	{"fmul",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
+	{"fneg",{FD_REG_N},{HEX_F,REG_N,HEX_4,HEX_D}},
+	{"frchg",{0},{HEX_F,HEX_B,HEX_F,HEX_D}},
+	{"fschg",{0},{HEX_F,HEX_3,HEX_F,HEX_D}},
+	{"fsqrt",{FD_REG_N},{HEX_F,REG_N,HEX_6,HEX_D}},
+	{"fsts",{FPUL_M,F_REG_N},{HEX_F,REG_N,HEX_0,HEX_D}},
+	{"fsub",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
+	{"fsub",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
+	{"ftrc",{FD_REG_N,FPUL_M},{HEX_F,REG_N,HEX_3,HEX_D}},
+	{"ftrv",{XMTRX_M4,V_REG_N},{HEX_F,REG_NM,HEX_F,HEX_D}},
+	{ 0 },
+};
+
+static void print_sh_insn(u32 memaddr, u16 insn)
+{
+	int relmask = ~0;
+	int nibs[4] = { (insn >> 12) & 0xf, (insn >> 8) & 0xf, (insn >> 4) & 0xf, insn & 0xf};
+	int lastsp;
+	struct sh_opcode_info *op = sh_table;
+
+	for (; op->name; op++) {
+		int n;
+		int imm = 0;
+		int rn = 0;
+		int rm = 0;
+		int rb = 0;
+		int disp_pc;
+		int disp_pc_addr = 0;
+
+		for (n = 0; n < 4; n++) {
+			int i = op->nibbles[n];
+
+			if (i < 16) {
+				if (nibs[n] == i)
+					continue;
+				goto fail;
+			}
+			switch (i) {
+			case BRANCH_8:
+				imm = (nibs[2] << 4) | (nibs[3]);
+				if (imm & 0x80)
+					imm |= ~0xff;
+				imm = ((char)imm) * 2 + 4 ;
+				goto ok;
+			case BRANCH_12:
+				imm = ((nibs[1]) << 8) | (nibs[2] << 4) | (nibs[3]);
+				if (imm & 0x800)
+					imm |= ~0xfff;
+				imm = imm * 2 + 4;
+				goto ok;
+			case IMM_4:
+				imm = nibs[3];
+				goto ok;
+			case IMM_4BY2:
+				imm = nibs[3] <<1;
+				goto ok;
+			case IMM_4BY4:
+				imm = nibs[3] <<2;
+				goto ok;
+			case IMM_8:
+				imm = (nibs[2] << 4) | nibs[3];
+				goto ok;
+			case PCRELIMM_8BY2:
+				imm = ((nibs[2] << 4) | nibs[3]) <<1;
+				relmask = ~1;
+				goto ok;
+			case PCRELIMM_8BY4:
+				imm = ((nibs[2] << 4) | nibs[3]) <<2;
+				relmask = ~3;
+				goto ok;
+			case IMM_8BY2:
+				imm = ((nibs[2] << 4) | nibs[3]) <<1;
+				goto ok;
+			case IMM_8BY4:
+				imm = ((nibs[2] << 4) | nibs[3]) <<2;
+				goto ok;
+			case DISP_8:
+				imm = (nibs[2] << 4) | (nibs[3]);
+				goto ok;
+			case DISP_4:
+				imm = nibs[3];
+				goto ok;
+			case REG_N:
+				rn = nibs[n];
+				break;
+			case REG_M:
+				rm = nibs[n];
+				break;
+			case REG_NM:
+				rn = (nibs[n] & 0xc) >> 2;
+				rm = (nibs[n] & 0x3);
+				break;
+			case REG_B:
+				rb = nibs[n] & 0x07;
+				break;
+			default:
+				return;
+			}
+		}
+
+	ok:
+		printk("%-8s  ", op->name);
+		lastsp = (op->arg[0] == A_END);
+		disp_pc = 0;
+		for (n = 0; n < 6 && op->arg[n] != A_END; n++) {
+			if (n && op->arg[1] != A_END)
+				printk(", ");
+			switch (op->arg[n]) {
+			case A_IMM:
+				printk("#%d", (char)(imm));
+				break;
+			case A_R0:
+				printk("r0");
+				break;
+			case A_REG_N:
+				printk("r%d", rn);
+				break;
+			case A_INC_N:
+				printk("@r%d+", rn);
+				break;
+			case A_DEC_N:
+				printk("@-r%d", rn);
+				break;
+			case A_IND_N:
+				printk("@r%d", rn);
+				break;
+			case A_DISP_REG_N:
+				printk("@(%d,r%d)", imm, rn);
+				break;
+			case A_REG_M:
+				printk("r%d", rm);
+				break;
+			case A_INC_M:
+				printk("@r%d+", rm);
+				break;
+			case A_DEC_M:
+				printk("@-r%d", rm);
+				break;
+			case A_IND_M:
+				printk("@r%d", rm);
+				break;
+			case A_DISP_REG_M:
+				printk("@(%d,r%d)", imm, rm);
+				break;
+			case A_REG_B:
+				printk("r%d_bank", rb);
+				break;
+			case A_DISP_PC:
+				disp_pc = 1;
+				disp_pc_addr = imm + 4 + (memaddr & relmask);
+				printk("%08x <%pS>", disp_pc_addr,
+				       (void *)disp_pc_addr);
+				break;
+			case A_IND_R0_REG_N:
+				printk("@(r0,r%d)", rn);
+				break;
+			case A_IND_R0_REG_M:
+				printk("@(r0,r%d)", rm);
+				break;
+			case A_DISP_GBR:
+				printk("@(%d,gbr)",imm);
+				break;
+			case A_R0_GBR:
+				printk("@(r0,gbr)");
+				break;
+			case A_BDISP12:
+			case A_BDISP8:
+				printk("%08x", imm + memaddr);
+				break;
+			case A_SR:
+				printk("sr");
+				break;
+			case A_GBR:
+				printk("gbr");
+				break;
+			case A_VBR:
+				printk("vbr");
+				break;
+			case A_SSR:
+				printk("ssr");
+				break;
+			case A_SPC:
+				printk("spc");
+				break;
+			case A_MACH:
+				printk("mach");
+				break;
+			case A_MACL:
+				printk("macl");
+				break;
+			case A_PR:
+				printk("pr");
+				break;
+			case A_SGR:
+				printk("sgr");
+				break;
+			case A_DBR:
+				printk("dbr");
+				break;
+			case FD_REG_N:
+				if (0)
+					goto d_reg_n;
+			case F_REG_N:
+				printk("fr%d", rn);
+				break;
+			case F_REG_M:
+				printk("fr%d", rm);
+				break;
+			case DX_REG_N:
+				if (rn & 1) {
+					printk("xd%d", rn & ~1);
+					break;
+				}
+			d_reg_n:
+			case D_REG_N:
+				printk("dr%d", rn);
+				break;
+			case DX_REG_M:
+				if (rm & 1) {
+					printk("xd%d", rm & ~1);
+					break;
+				}
+			case D_REG_M:
+				printk("dr%d", rm);
+				break;
+			case FPSCR_M:
+			case FPSCR_N:
+				printk("fpscr");
+				break;
+			case FPUL_M:
+			case FPUL_N:
+				printk("fpul");
+				break;
+			case F_FR0:
+				printk("fr0");
+				break;
+			case V_REG_N:
+				printk("fv%d", rn*4);
+				break;
+			case V_REG_M:
+				printk("fv%d", rm*4);
+				break;
+			case XMTRX_M4:
+				printk("xmtrx");
+				break;
+			default:
+				return;
+			}
+		}
+
+		if (disp_pc && strcmp(op->name, "mova") != 0) {
+			u32 val;
+
+			if (relmask == ~1)
+				__get_user(val, (u16 *)disp_pc_addr);
+			else
+				__get_user(val, (u32 *)disp_pc_addr);
+
+			printk("  ! %08x <%pS>", val, (void *)val);
+		}
+
+		return;
+	fail:
+		;
+
+	}
+
+	printk(".word 0x%x%x%x%x", nibs[0], nibs[1], nibs[2], nibs[3]);
+}
+
+void show_code(struct pt_regs *regs)
+{
+	unsigned short *pc = (unsigned short *)regs->pc;
+	long i;
+
+	if (regs->pc & 0x1)
+		return;
+
+	printk("Code:\n");
+
+	for (i = -3 ; i < 6 ; i++) {
+		unsigned short insn;
+
+		if (__get_user(insn, pc + i)) {
+			printk(" (Bad address in pc)\n");
+			break;
+		}
+
+		printk("%s%08lx:  ", (i ? "  ": "->"), (unsigned long)(pc + i));
+		print_sh_insn((unsigned long)(pc + i), insn);
+		printk("\n");
+	}
+
+	printk("\n");
+}

arch/sh/kernel/entry-common.S

@@ -308,15 +308,19 @@ ENTRY(system_call)
 	mov.l	1f, r9
 	mov.l	@r9, r8		! Read from TRA (Trap Address) Register
 #endif
+
+	mov	#OFF_TRA, r10
+	add	r15, r10
+	mov.l	r8, @r10		! set TRA value to tra
+
 	/*
 	 * Check the trap type
 	 */
 	mov	#((0x20 << 2) - 1), r9
 	cmp/hi	r9, r8
 	bt/s	debug_trap		! it's a debug trap..
-	 mov	#OFF_TRA, r9
-	add	r15, r9
-	mov.l	r8, @r9			! set TRA value to tra
+	 nop
+
 #ifdef CONFIG_TRACE_IRQFLAGS
 	mov.l	5f, r10
 	jsr	@r10
@@ -371,47 +375,3 @@ syscall_exit:
 #endif
 7:	.long	do_syscall_trace_enter
 8:	.long	do_syscall_trace_leave
-
-#ifdef CONFIG_FUNCTION_TRACER
-	.align 2
-	.globl	_mcount
-	.type	_mcount,@function
-	.globl	mcount
-	.type	mcount,@function
-_mcount:
-mcount:
-	mov.l	r4, @-r15
-	mov.l	r5, @-r15
-	mov.l	r6, @-r15
-	mov.l	r7, @-r15
-	sts.l	pr, @-r15
-
-	mov.l	@(20,r15),r4
-	sts	pr, r5
-
-	mov.l	1f, r6
-	mov.l	ftrace_stub, r7	
-	cmp/eq	r6, r7
-	bt	skip_trace
-
-	mov.l	@r6, r6
-	jsr	@r6
-	 nop
-
-skip_trace:
-
-	lds.l	@r15+, pr
-	mov.l	@r15+, r7
-	mov.l	@r15+, r6
-	mov.l	@r15+, r5
-	rts
-	 mov.l	@r15+, r4
-
-	.align 2
-1:	.long	ftrace_trace_function
-
-	.globl	ftrace_stub
-ftrace_stub:
-	rts
-	 nop
-#endif /* CONFIG_FUNCTION_TRACER */