ARM: ux500: Elaborate on SDI device node names in Device Tree

In the DB8500 Reference Manual SDI devices are described as being
part of peripheral blocks. This is more in line with how these devices
are actually represented in hardware, so here we detail which
peripheral block each of the SDI devices belong in the node name.

Requested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

arch/arm/boot/dts/dbx5x0.dtsi

@@ -546,42 +546,42 @@
 			status = "disabled";
 		};
 
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
 			interrupts = <0 60 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80118000 {
+		sdi1_per2@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
 			interrupts = <0 50 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80005000 {
+		sdi2_per3@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
 			interrupts = <0 41 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80119000 {
+		sdi3_per2@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
 			interrupts = <0 59 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
 			interrupts = <0 99 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80008000 {
+		sdi5_per3@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
 			interrupts = <0 100 0x4>;

arch/arm/boot/dts/snowball.dts

@@ -120,7 +120,7 @@
 		};
 
 		// External Micro SD slot
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <50000000>;
 			bus-width = <8>;
@@ -134,7 +134,7 @@
 		};
 
 		// On-board eMMC
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <50000000>;
 			bus-width = <8>;