Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.24

arch/powerpc/Kconfig

@@ -599,7 +599,8 @@ config TASK_SIZE_BOOL
 
 config TASK_SIZE
 	hex "Size of user task space" if TASK_SIZE_BOOL
-	default "0x80000000"
+	default "0x80000000" if PPC_PREP || PPC_8xx
+	default "0xc0000000"
 
 config CONSISTENT_START_BOOL
 	bool "Set custom consistent memory pool address"

arch/powerpc/boot/dts/mpc8272ads.dts

@@ -121,7 +121,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
-			reg = <119c0 30 0 2000>;
+			reg = <119c0 30>;
 			ranges;
 
 			muram@0 {

arch/powerpc/boot/dts/mpc8541cds.dts

@@ -145,6 +145,42 @@
 			device_type = "open-pic";
                         big-endian;
 		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
+			reg = <919c0 30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 80000 10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 2000 9000 1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8541-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <919f0 10 915f0 10>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <2e 2>;
+				interrupt-parent = <&mpic>;
+				reg = <90c00 80>;
+				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
 	};
 
 	pci1: pci@e0008000 {

arch/powerpc/boot/dts/mpc8555cds.dts

@@ -145,6 +145,42 @@
 			device_type = "open-pic";
                         big-endian;
 		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
+			reg = <919c0 30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 80000 10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 2000 9000 1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8555-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <919f0 10 915f0 10>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <2e 2>;
+				interrupt-parent = <&mpic>;
+				reg = <90c00 80>;
+				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
 	};
 
 	pci1: pci@e0008000 {

arch/powerpc/boot/dts/mpc8560ads.dts

@@ -138,15 +138,31 @@
 			device_type = "open-pic";
 		};
 
-		cpm@e0000000 {
+		cpm@919c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			device_type = "cpm";
-			model = "CPM2";
-			ranges = <0 0 c0000>;
-			reg = <80000 40000>;
-			command-proc = <919c0>;
-			brg-frequency = <9d5b340>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+			reg = <919c0 30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 80000 10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 4000 9000 2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <919f0 10 915f0 10>;
+				clock-frequency = <d#165000000>;
+			};
 
 			cpmpic: pic@90c00 {
 				interrupt-controller;
@@ -155,43 +171,38 @@
 				interrupts = <2e 2>;
 				interrupt-parent = <&mpic>;
 				reg = <90c00 80>;
-				device_type = "cpm-pic";
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
 			};
 
-			scc@91a00 {
+			serial@91a00 {
 				device_type = "serial";
-				compatible = "cpm_uart";
-				model = "SCC";
-				device-id = <1>;
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
 				reg = <91a00 20 88000 100>;
-				clock-setup = <00ffffff 0>;
-				rx-clock = <1>;
-				tx-clock = <1>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <00800000>;
 				current-speed = <1c200>;
 				interrupts = <28 8>;
 				interrupt-parent = <&cpmpic>;
 			};
 
-			scc@91a20 {
+			serial@91a20 {
 				device_type = "serial";
-				compatible = "cpm_uart";
-				model = "SCC";
-				device-id = <2>;
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
 				reg = <91a20 20 88100 100>;
-				clock-setup = <ff00ffff 90000>;
-				rx-clock = <2>;
-				tx-clock = <2>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <04a00000>;
 				current-speed = <1c200>;
 				interrupts = <29 8>;
 				interrupt-parent = <&cpmpic>;
 			};
 
-			fcc@91320 {
+			ethernet@91320 {
 				device_type = "network";
-				compatible = "fs_enet";
-				model = "FCC";
-				device-id = <2>;
-				reg = <91320 20 88500 100 913a0 30>;
+				compatible = "fsl,mpc8560-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <91320 20 88500 100 913b0 1>;
 				/*
 				 * mac-address is deprecated and will be removed
 				 * in 2.6.25.  Only recent versions of
@@ -199,20 +210,17 @@
 				 */
 				mac-address = [ 00 00 00 00 00 00 ];
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				clock-setup = <ff00ffff 250000>;
-				rx-clock = <15>;
-				tx-clock = <16>;
+				fsl,cpm-command = <16200300>;
 				interrupts = <21 8>;
 				interrupt-parent = <&cpmpic>;
 				phy-handle = <&phy2>;
 			};
 
-			fcc@91340 {
+			ethernet@91340 {
 				device_type = "network";
-				compatible = "fs_enet";
-				model = "FCC";
-				device-id = <3>;
-				reg = <91340 20 88600 100 913d0 30>;
+				compatible = "fsl,mpc8560-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <91340 20 88600 100 913d0 1>;
 				/*
 				 * mac-address is deprecated and will be removed
 				 * in 2.6.25.  Only recent versions of
@@ -220,9 +228,7 @@
 				 */
 				mac-address = [ 00 00 00 00 00 00 ];
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				clock-setup = <ffff00ff 3700>;
-				rx-clock = <17>;
-				tx-clock = <18>;
+				fsl,cpm-command = <1a400300>;
 				interrupts = <22 8>;
 				interrupt-parent = <&cpmpic>;
 				phy-handle = <&phy3>;

arch/powerpc/configs/mpc8560_ads_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:43 2007
+# Linux kernel version: 2.6.23-rc9
+# Thu Oct 11 09:16:32 2007
 #
 # CONFIG_PPC64 is not set
 
@@ -22,8 +22,13 @@ CONFIG_FSL_BOOKE=y
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -86,7 +91,6 @@ CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -128,7 +132,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8544_DS is not set
+# CONFIG_MPC85xx_DS is not set
 CONFIG_MPC8560=y
 CONFIG_MPC85xx=y
 CONFIG_MPIC=y
@@ -142,12 +146,17 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
 
 #
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
@@ -158,7 +167,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
-# CONFIG_MATH_EMULATION is not set
+CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -177,6 +186,8 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
 CONFIG_WANT_DEVICE_TREE=y
 CONFIG_DEVICE_TREE=""
@@ -415,6 +426,7 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -807,3 +819,4 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set

arch/powerpc/kernel/head_32.S

@@ -469,12 +469,12 @@ InstructionTLBMiss:
 	mfctr	r0
 	/* Get PTE (linux-style) and check access */
 	mfspr	r3,SPRN_IMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
+	lis	r1,PAGE_OFFSET@h		/* check if kernel address */
+	cmplw	0,r1,r3
 	mfspr	r2,SPRN_SPRG3
 	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
 	lwz	r2,PGDIR(r2)
-	blt+	112f
+	bge-	112f
 	mfspr	r2,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
 	rlwimi	r1,r2,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
 	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
@@ -543,12 +543,12 @@ DataLoadTLBMiss:
 	mfctr	r0
 	/* Get PTE (linux-style) and check access */
 	mfspr	r3,SPRN_DMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
+	lis	r1,PAGE_OFFSET@h		/* check if kernel address */
+	cmplw	0,r1,r3
 	mfspr	r2,SPRN_SPRG3
 	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
 	lwz	r2,PGDIR(r2)
-	blt+	112f
+	bge-	112f
 	mfspr	r2,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
 	rlwimi	r1,r2,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
 	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
@@ -615,12 +615,12 @@ DataStoreTLBMiss:
 	mfctr	r0
 	/* Get PTE (linux-style) and check access */
 	mfspr	r3,SPRN_DMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
+	lis	r1,PAGE_OFFSET@h		/* check if kernel address */
+	cmplw	0,r1,r3
 	mfspr	r2,SPRN_SPRG3
 	li	r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
 	lwz	r2,PGDIR(r2)
-	blt+	112f
+	bge-	112f
 	mfspr	r2,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
 	rlwimi	r1,r2,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
 	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */

arch/powerpc/kernel/head_40x.S

@@ -289,7 +289,7 @@ label:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	lis	r11, TASK_SIZE@h
+	lis	r11, PAGE_OFFSET@h
 	cmplw	r10, r11
 	blt+	3f
 	lis	r11, swapper_pg_dir@h
@@ -481,7 +481,7 @@ label:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	lis	r11, TASK_SIZE@h
+	lis	r11, PAGE_OFFSET@h
 	cmplw	r10, r11
 	blt+	3f
 	lis	r11, swapper_pg_dir@h
@@ -581,7 +581,7 @@ label:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	lis	r11, TASK_SIZE@h
+	lis	r11, PAGE_OFFSET@h
 	cmplw	r10, r11
 	blt+	3f
 	lis	r11, swapper_pg_dir@h

arch/powerpc/kernel/head_44x.S

@@ -319,7 +319,7 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	lis	r11, TASK_SIZE@h
+	lis	r11, PAGE_OFFSET@h
 	cmplw	r10, r11
 	blt+	3f
 	lis	r11, swapper_pg_dir@h
@@ -458,7 +458,7 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	lis	r11, TASK_SIZE@h
+	lis	r11, PAGE_OFFSET@h
 	cmplw	r10, r11
 	blt+	3f
 	lis	r11, swapper_pg_dir@h
@@ -528,7 +528,7 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	lis	r11, TASK_SIZE@h
+	lis	r11, PAGE_OFFSET@h
 	cmplw	r10, r11
 	blt+	3f
 	lis	r11, swapper_pg_dir@h

arch/powerpc/kernel/head_fsl_booke.S

@@ -461,8 +461,7 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	lis	r11, TASK_SIZE@h
-	ori	r11, r11, TASK_SIZE@l
+	lis	r11, PAGE_OFFSET@h
 	cmplw	0, r10, r11
 	bge	2f
 
@@ -584,8 +583,7 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	lis	r11, TASK_SIZE@h
-	ori	r11, r11, TASK_SIZE@l
+	lis	r11, PAGE_OFFSET@h
 	cmplw	5, r10, r11
 	blt	5, 3f
 	lis	r11, swapper_pg_dir@h
@@ -645,8 +643,7 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	lis	r11, TASK_SIZE@h
-	ori	r11, r11, TASK_SIZE@l
+	lis	r11, PAGE_OFFSET@h
 	cmplw	5, r10, r11
 	blt	5, 3f
 	lis	r11, swapper_pg_dir@h
@@ -744,7 +741,7 @@ data_access:
  *	r10 - EA of fault
  *	r11 - TLB (info from Linux PTE)
  *	r12, r13 - available to use
- *	CR5 - results of addr < TASK_SIZE
+ *	CR5 - results of addr >= PAGE_OFFSET
  *	MAS0, MAS1 - loaded with proper value when we get here
  *	MAS2, MAS3 - will need additional info from Linux PTE
  *	Upon exit, we reload everything and RFI.

arch/powerpc/platforms/85xx/Kconfig

@@ -12,6 +12,7 @@ config MPC8540_ADS
 config MPC8560_ADS
 	bool "Freescale MPC8560 ADS"
 	select DEFAULT_UIMAGE
+	select PPC_CPM_NEW_BINDING
 	help
 	  This option enables support for the MPC 8560 ADS board
 

arch/powerpc/platforms/85xx/mpc8540_ads.h

@@ -1,35 +0,0 @@
-/*
- * arch/powerpc/platforms/85xx/mpc8540_ads.h
- *
- * MPC8540ADS board definitions
- *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC8540ADS_H__
-#define __MACH_MPC8540ADS_H__
-
-#include <linux/initrd.h>
-
-#define BOARD_CCSRBAR		((uint)0xe0000000)
-#define BCSR_ADDR		((uint)0xf8000000)
-#define BCSR_SIZE		((uint)(32 * 1024))
-
-/* PCI interrupt controller */
-#define PIRQA		MPC85xx_IRQ_EXT1
-#define PIRQB		MPC85xx_IRQ_EXT2
-#define PIRQC		MPC85xx_IRQ_EXT3
-#define PIRQD		MPC85xx_IRQ_EXT4
-
-/* Offset of CPM register space */
-#define CPM_MAP_ADDR	(CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#endif				/* __MACH_MPC8540ADS_H__ */

arch/powerpc/platforms/85xx/mpc85xx_ads.c

@@ -17,13 +17,12 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/prom.h>
 #include <asm/mpic.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
@@ -32,10 +31,8 @@
 #include <sysdev/fsl_pci.h>
 
 #ifdef CONFIG_CPM2
-#include <linux/fs_enet_pd.h>
 #include <asm/cpm2.h>
 #include <sysdev/cpm2_pic.h>
-#include <asm/fs_pd.h>
 #endif
 
 #ifdef CONFIG_PCI
@@ -95,10 +92,10 @@ static void __init mpc85xx_ads_pic_init(void)
 
 #ifdef CONFIG_CPM2
 	/* Setup CPM2 PIC */
-	np = of_find_node_by_type(NULL, "cpm-pic");
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
 	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
-                return;
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+		return;
 	}
 	irq = irq_of_parse_and_map(np, 0);
 
@@ -111,81 +108,75 @@ static void __init mpc85xx_ads_pic_init(void)
  * Setup the architecture
  */
 #ifdef CONFIG_CPM2
-void init_fcc_ioports(struct fs_platform_info *fpi)
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin mpc8560_ads_pins[] = {
+	/* SCC1 */
+	{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* SCC2 */
+	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC2 */
+	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
+	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
+
+	/* FCC3 */
+	{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
+	{2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
+};
+
+static void __init init_ioports(void)
 {
-	struct io_port *io = cpm2_map(im_ioport);
-	int fcc_no = fs_get_fcc_index(fpi->fs_no);
-	int target;
-	u32 tempval;
-
-	switch(fcc_no) {
-	case 1:
-		tempval = in_be32(&io->iop_pdirb);
-		tempval &= ~PB2_DIRB0;
-		tempval |= PB2_DIRB1;
-		out_be32(&io->iop_pdirb, tempval);
-
-		tempval = in_be32(&io->iop_psorb);
-		tempval &= ~PB2_PSORB0;
-		tempval |= PB2_PSORB1;
-		out_be32(&io->iop_psorb, tempval);
-
-		tempval = in_be32(&io->iop_pparb);
-		tempval |= (PB2_DIRB0 | PB2_DIRB1);
-		out_be32(&io->iop_pparb, tempval);
-
-		target = CPM_CLK_FCC2;
-		break;
-	case 2:
-		tempval = in_be32(&io->iop_pdirb);
-		tempval &= ~PB3_DIRB0;
-		tempval |= PB3_DIRB1;
-		out_be32(&io->iop_pdirb, tempval);
-
-		tempval = in_be32(&io->iop_psorb);
-		tempval &= ~PB3_PSORB0;
-		tempval |= PB3_PSORB1;
-		out_be32(&io->iop_psorb, tempval);
-
-		tempval = in_be32(&io->iop_pparb);
-		tempval |= (PB3_DIRB0 | PB3_DIRB1);
-		out_be32(&io->iop_pparb, tempval);
-
-		tempval = in_be32(&io->iop_pdirc);
-		tempval |= PC3_DIRC1;
-		out_be32(&io->iop_pdirc, tempval);
-
-		tempval = in_be32(&io->iop_pparc);
-		tempval |= PC3_DIRC1;
-		out_be32(&io->iop_pparc, tempval);
-
-		target = CPM_CLK_FCC3;
-		break;
-	default:
-		printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
-		return;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
+		struct cpm_pin *pin = &mpc8560_ads_pins[i];
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
 	}
 
-	/* Port C has clocks......  */
-	tempval = in_be32(&io->iop_psorc);
-	tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
-	out_be32(&io->iop_psorc, tempval);
-
-	tempval = in_be32(&io->iop_pdirc);
-	tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
-	out_be32(&io->iop_pdirc, tempval);
-	tempval = in_be32(&io->iop_pparc);
-	tempval |= (PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
-	out_be32(&io->iop_pparc, tempval);
-
-	cpm2_unmap(io);
-
-	/* Configure Serial Interface clock routing.
-	 * First,  clear FCC bits to zero,
-	 * then set the ones we want.
-	 */
-	cpm2_clk_setup(target, fpi->clk_rx, CPM_CLK_RX);
-	cpm2_clk_setup(target, fpi->clk_tx, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
 }
 #endif
 
@@ -200,6 +191,7 @@ static void __init mpc85xx_ads_setup_arch(void)
 
 #ifdef CONFIG_CPM2
 	cpm2_reset();
+	init_ioports();
 #endif
 
 #ifdef CONFIG_PCI
@@ -231,6 +223,24 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .name = "soc", },
+	{ .type = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	if (!machine_is(mpc85xx_ads))
+		return 0;
+
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+device_initcall(declare_of_platform_devices);
+
 /*
  * Called very early, device-tree isn't unflattened
  */

arch/powerpc/platforms/85xx/mpc85xx_ads.h

@@ -1,60 +0,0 @@
-/*
- * MPC85xx ADS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * 2006 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC85XXADS_H
-#define __MACH_MPC85XXADS_H
-
-#include <linux/initrd.h>
-#include <sysdev/fsl_soc.h>
-
-#define BCSR_ADDR		((uint)0xf8000000)
-#define BCSR_SIZE		((uint)(32 * 1024))
-
-#ifdef CONFIG_CPM2
-
-#define MPC85xx_CPM_OFFSET	(0x80000)
-
-#define CPM_MAP_ADDR		(get_immrbase() + MPC85xx_CPM_OFFSET)
-#define CPM_IRQ_OFFSET		60
-
-#define SIU_INT_SMC1		((uint)0x04+CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2		((uint)0x05+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC1		((uint)0x28+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC2		((uint)0x29+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC3		((uint)0x2a+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
-
-/* FCC1 Clock Source Configuration.  These can be
- * redefined in the board specific file.
- *    Can only choose from CLK9-12 */
-#define F1_RXCLK       12
-#define F1_TXCLK       11
-
-/* FCC2 Clock Source Configuration.  These can be
- * redefined in the board specific file.
- *    Can only choose from CLK13-16 */
-#define F2_RXCLK       13
-#define F2_TXCLK       14
-
-/* FCC3 Clock Source Configuration.  These can be
- * redefined in the board specific file.
- *    Can only choose from CLK13-16 */
-#define F3_RXCLK       15
-#define F3_TXCLK       16
-
-#endif	/* CONFIG_CPM2 */
-#endif	/* __MACH_MPC85XXADS_H */

arch/powerpc/platforms/85xx/mpc85xx_cds.c

@@ -36,7 +36,6 @@
 #include <asm/machdep.h>
 #include <asm/ipic.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
 #include <asm/irq.h>
 #include <mm/mmu_decl.h>
 #include <asm/prom.h>
@@ -47,6 +46,15 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+/* CADMUS info */
+/* xxx - galak, move into device tree */
+#define CADMUS_BASE (0xf8004000)
+#define CADMUS_SIZE (256)
+#define CM_VER	(0)
+#define CM_CSR	(1)
+#define CM_RST	(2)
+
+
 static int cds_pci_slot = 2;
 static volatile u8 *cadmus;
 

arch/powerpc/platforms/85xx/mpc85xx_cds.h

@@ -1,43 +0,0 @@
-/*
- * arch/powerpc/platforms/85xx/mpc85xx_cds.h
- *
- * MPC85xx CDS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC85XX_CDS_H__
-#define __MACH_MPC85XX_CDS_H__
-
-/* CADMUS info */
-#define CADMUS_BASE (0xf8004000)
-#define CADMUS_SIZE (256)
-#define CM_VER	(0)
-#define CM_CSR	(1)
-#define CM_RST	(2)
-
-/* CDS NVRAM/RTC */
-#define CDS_RTC_ADDR	(0xf8000000)
-#define CDS_RTC_SIZE	(8 * 1024)
-
-/* PCI interrupt controller */
-#define PIRQ0A			MPC85xx_IRQ_EXT0
-#define PIRQ0B			MPC85xx_IRQ_EXT1
-#define PIRQ0C			MPC85xx_IRQ_EXT2
-#define PIRQ0D			MPC85xx_IRQ_EXT3
-#define PIRQ1A			MPC85xx_IRQ_EXT11
-
-#define NR_8259_INTS		16
-#define CPM_IRQ_OFFSET		NR_8259_INTS
-
-#define MPC85xx_OPENPIC_IRQ_OFFSET	80
-
-#endif /* __MACH_MPC85XX_CDS_H__ */

arch/powerpc/platforms/85xx/mpc85xx_ds.c

@@ -24,7 +24,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
 #include <mm/mmu_decl.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -39,7 +39,6 @@
 #include <asm/io.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
 #include <asm/irq.h>
 #include <mm/mmu_decl.h>
 #include <asm/prom.h>

include/asm-powerpc/cpm2.h

@@ -13,6 +13,10 @@
 #include <asm/immap_cpm2.h>
 #include <asm/cpm.h>
 
+#ifdef CONFIG_PPC_85xx
+#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
+#endif
+
 /* CPM Command register.
 */
 #define CPM_CR_RST	((uint)0x80000000)

include/asm-powerpc/fs_pd.h

@@ -19,8 +19,6 @@
 
 #if defined(CONFIG_8260)
 #include <asm/mpc8260.h>
-#elif defined(CONFIG_85xx)
-#include <asm/mpc85xx.h>
 #endif
 
 #define cpm2_map(member) (&cpm2_immr->member)

include/asm-powerpc/mpc85xx.h

@@ -1,45 +0,0 @@
-/*
- * include/asm-powerpc/mpc85xx.h
- *
- * MPC85xx definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_MPC85xx_H__
-#define __ASM_MPC85xx_H__
-
-#include <asm/mmu.h>
-
-#ifdef CONFIG_85xx
-
-#if defined(CONFIG_MPC8540_ADS) || defined(CONFIG_MPC8560_ADS)
-#include <platforms/85xx/mpc85xx_ads.h>
-#endif
-#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
-#include <platforms/85xx/mpc8555_cds.h>
-#endif
-#ifdef CONFIG_MPC85xx_CDS
-#include <platforms/85xx/mpc85xx_cds.h>
-#endif
-
-/* Let modules/drivers get at CCSRBAR */
-extern phys_addr_t get_ccsrbar(void);
-
-#ifdef MODULE
-#define CCSRBAR get_ccsrbar()
-#else
-#define CCSRBAR BOARD_CCSRBAR
-#endif
-
-#endif /* CONFIG_85xx */
-#endif /* __ASM_MPC85xx_H__ */
-#endif /* __KERNEL__ */