USB: remove err() macro from more usb drivers

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/isp1760-if.c

@@ -218,7 +218,7 @@ static int __devinit isp1761_pci_probe(struct pci_dev *dev,
 	 * and reading back and checking the contents are same or not
 	 */
 	if (reg_data != 0xFACE) {
-		err("scratch register mismatch %x", reg_data);
+		dev_err(&dev->dev, "scratch register mismatch %x\n", reg_data);
 		goto clean;
 	}
 

drivers/usb/host/r8a66597-hcd.c

@@ -118,7 +118,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 		r8a66597_write(r8a66597, SCKE, SYSCFG0);
 		tmp = r8a66597_read(r8a66597, SYSCFG0);
 		if (i++ > 1000) {
-			err("register access fail.");
+			printk(KERN_ERR "r8a66597: register access fail.\n");
 			return -ENXIO;
 		}
 	} while ((tmp & SCKE) != SCKE);
@@ -128,7 +128,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 		r8a66597_write(r8a66597, USBE, SYSCFG0);
 		tmp = r8a66597_read(r8a66597, SYSCFG0);
 		if (i++ > 1000) {
-			err("register access fail.");
+			printk(KERN_ERR "r8a66597: register access fail.\n");
 			return -ENXIO;
 		}
 	} while ((tmp & USBE) != USBE);
@@ -141,7 +141,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 		msleep(1);
 		tmp = r8a66597_read(r8a66597, SYSCFG0);
 		if (i++ > 500) {
-			err("register access fail.");
+			printk(KERN_ERR "r8a66597: register access fail.\n");
 			return -ENXIO;
 		}
 	} while ((tmp & SCKE) != SCKE);
@@ -265,7 +265,7 @@ static void get_port_number(char *devpath, u16 *root_port, u16 *hub_port)
 	if (root_port) {
 		*root_port = (devpath[0] & 0x0F) - 1;
 		if (*root_port >= R8A66597_MAX_ROOT_HUB)
-			err("illegal root port number");
+			printk(KERN_ERR "r8a66597: Illegal root port number.\n");
 	}
 	if (hub_port)
 		*hub_port = devpath[2] & 0x0F;
@@ -286,7 +286,7 @@ static u16 get_r8a66597_usb_speed(enum usb_device_speed speed)
 		usbspd = HSMODE;
 		break;
 	default:
-		err("unknown speed");
+		printk(KERN_ERR "r8a66597: unknown speed\n");
 		break;
 	}
 
@@ -385,7 +385,7 @@ static u8 alloc_usb_address(struct r8a66597 *r8a66597, struct urb *urb)
 	struct r8a66597_device *dev;
 
 	if (is_hub_limit(urb->dev->devpath)) {
-		err("Externel hub limit reached.");
+		dev_err(&urb->dev->dev, "External hub limit reached.\n");
 		return 0;
 	}
 
@@ -406,8 +406,9 @@ static u8 alloc_usb_address(struct r8a66597 *r8a66597, struct urb *urb)
 		return addr;
 	}
 
-	err("cannot communicate with a USB device more than 10.(%x)",
-	    r8a66597->address_map);
+	dev_err(&urb->dev->dev,
+		"cannot communicate with a USB device more than 10.(%x)\n",
+		r8a66597->address_map);
 
 	return 0;
 }
@@ -447,7 +448,8 @@ static void r8a66597_reg_wait(struct r8a66597 *r8a66597, unsigned long reg,
 	do {
 		tmp = r8a66597_read(r8a66597, reg);
 		if (i++ > 1000000) {
-			err("register%lx, loop %x is timeout", reg, loop);
+			printk(KERN_ERR "r8a66597: register%lx, loop %x "
+			       "is timeout\n", reg, loop);
 			break;
 		}
 		ndelay(1);
@@ -675,7 +677,7 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
 			array[i++] = 1;
 		break;
 	default:
-		err("Illegal type");
+		printk(KERN_ERR "r8a66597: Illegal type\n");
 		return 0;
 	}
 
@@ -705,7 +707,7 @@ static u16 get_r8a66597_type(__u8 type)
 		r8a66597_type = R8A66597_ISO;
 		break;
 	default:
-		err("Illegal type");
+		printk(KERN_ERR "r8a66597: Illegal type\n");
 		r8a66597_type = 0x0000;
 		break;
 	}
@@ -724,7 +726,7 @@ static u16 get_bufnum(u16 pipenum)
 	else if (check_interrupt(pipenum))
 		bufnum = 4 + (pipenum - 6);
 	else
-		err("Illegal pipenum (%d)", pipenum);
+		printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum);
 
 	return bufnum;
 }
@@ -740,7 +742,7 @@ static u16 get_buf_bsize(u16 pipenum)
 	else if (check_interrupt(pipenum))
 		buf_bsize = 0;
 	else
-		err("Illegal pipenum (%d)", pipenum);
+		printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum);
 
 	return buf_bsize;
 }
@@ -1189,7 +1191,7 @@ static int start_transfer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
 		prepare_status_packet(r8a66597, td);
 		break;
 	default:
-		err("invalid type.");
+		printk(KERN_ERR "r8a66597: invalid type.\n");
 		break;
 	}
 
@@ -1297,7 +1299,7 @@ static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
 	if (unlikely((tmp & FRDY) == 0)) {
 		pipe_stop(r8a66597, td->pipe);
 		pipe_irq_disable(r8a66597, pipenum);
-		err("in fifo not ready (%d)", pipenum);
+		printk(KERN_ERR "r8a66597: in fifo not ready (%d)\n", pipenum);
 		finish_request(r8a66597, td, pipenum, td->urb, -EPIPE);
 		return;
 	}
@@ -1372,7 +1374,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
 	if (unlikely((tmp & FRDY) == 0)) {
 		pipe_stop(r8a66597, td->pipe);
 		pipe_irq_disable(r8a66597, pipenum);
-		err("out write fifo not ready. (%d)", pipenum);
+		printk(KERN_ERR "r8a66597: out fifo not ready (%d)\n", pipenum);
 		finish_request(r8a66597, td, pipenum, urb, -EPIPE);
 		return;
 	}
@@ -2007,7 +2009,7 @@ static struct r8a66597_device *get_r8a66597_device(struct r8a66597 *r8a66597,
 		return dev;
 	}
 
-	err("get_r8a66597_device fail.(%d)\n", addr);
+	printk(KERN_ERR "r8a66597: get_r8a66597_device fail.(%d)\n", addr);
 	return NULL;
 }
 
@@ -2276,7 +2278,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 
 	if (pdev->dev.dma_mask) {
 		ret = -EINVAL;
-		err("dma not support");
+		dev_err(&pdev->dev, "dma not supported\n");
 		goto clean_up;
 	}
 
@@ -2284,14 +2286,15 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 					   (char *)hcd_name);
 	if (!res) {
 		ret = -ENODEV;
-		err("platform_get_resource_byname error.");
+		dev_err(&pdev->dev, "platform_get_resource_byname error.\n");
 		goto clean_up;
 	}
 
 	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!ires) {
 		ret = -ENODEV;
-		err("platform_get_resource IORESOURCE_IRQ error.");
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ error.\n");
 		goto clean_up;
 	}
 
@@ -2301,7 +2304,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	reg = ioremap(res->start, resource_len(res));
 	if (reg == NULL) {
 		ret = -ENOMEM;
-		err("ioremap error.");
+		dev_err(&pdev->dev, "ioremap error.\n");
 		goto clean_up;
 	}
 
@@ -2309,7 +2312,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	hcd = usb_create_hcd(&r8a66597_hc_driver, &pdev->dev, (char *)hcd_name);
 	if (!hcd) {
 		ret = -ENOMEM;
-		err("Failed to create hcd");
+		dev_err(&pdev->dev, "Failed to create hcd\n");
 		goto clean_up;
 	}
 	r8a66597 = hcd_to_r8a66597(hcd);
@@ -2355,12 +2358,12 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 			}
 			break;
 		default:
-			err("Unknown irq_sense value.");
+			dev_err(&pdev->dev, "Unknown irq_sense value.\n");
 	}
 
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
 	if (ret != 0) {
-		err("Failed to add hcd");
+		dev_err(&pdev->dev, "Failed to add hcd\n");
 		goto clean_up;
 	}
 

drivers/usb/image/mdc800.c

@@ -355,7 +355,7 @@ static int mdc800_usb_waitForIRQ (int mode, int msec)
 	if (mdc800->camera_request_ready>0)
 	{
 		mdc800->camera_request_ready=0;
-		err ("timeout waiting for camera.");
+		dev_err(&mdc800->dev->dev, "timeout waiting for camera.\n");
 		return -1;
 	}
 	
@@ -380,7 +380,8 @@ static void mdc800_usb_write_notify (struct urb *urb)
 	int status = urb->status;
 
 	if (status != 0)
-		err ("writing command fails (status=%i)", status);
+		dev_err(&mdc800->dev->dev,
+			"writing command fails (status=%i)\n", status);
 	else
 		mdc800->state=READY;
 	mdc800->written = 1;
@@ -407,7 +408,8 @@ static void mdc800_usb_download_notify (struct urb *urb)
 			mdc800->state=READY;
 		}
 	} else {
-		err ("request bytes fails (status:%i)", status);
+		dev_err(&mdc800->dev->dev,
+			"request bytes fails (status:%i)\n", status);
 	}
 	mdc800->downloaded = 1;
 	wake_up (&mdc800->download_wait);
@@ -450,7 +452,8 @@ static int mdc800_usb_probe (struct usb_interface *intf,
 
 	if (dev->descriptor.bNumConfigurations != 1)
 	{
-		err ("probe fails -> wrong Number of Configuration");
+		dev_err(&intf->dev,
+			"probe fails -> wrong Number of Configuration\n");
 		return -ENODEV;
 	}
 	intf_desc = intf->cur_altsetting;
@@ -462,7 +465,7 @@ static int mdc800_usb_probe (struct usb_interface *intf,
 		|| ( intf_desc->desc.bNumEndpoints != 4)
 	)
 	{
-		err ("probe fails -> wrong Interface");
+		dev_err(&intf->dev, "probe fails -> wrong Interface\n");
 		return -ENODEV;
 	}
 
@@ -483,7 +486,7 @@ static int mdc800_usb_probe (struct usb_interface *intf,
 		}
 		if (mdc800->endpoint[i] == -1)
 		{
-			err ("probe fails -> Wrong Endpoints.");
+			dev_err(&intf->dev, "probe fails -> Wrong Endpoints.\n");
 			return -ENODEV;
 		}
 	}
@@ -495,7 +498,7 @@ static int mdc800_usb_probe (struct usb_interface *intf,
 
 	retval = usb_register_dev(intf, &mdc800_class);
 	if (retval) {
-		err ("Not able to get a minor for this device.");
+		dev_err(&intf->dev, "Not able to get a minor for this device.\n");
 		return -ENODEV;
 	}
 
@@ -645,7 +648,8 @@ static int mdc800_device_open (struct inode* inode, struct file *file)
 	mdc800->irq_urb->dev = mdc800->dev;
 	retval = usb_submit_urb (mdc800->irq_urb, GFP_KERNEL);
 	if (retval) {
-		err ("request USB irq fails (submit_retval=%i).", retval);
+		dev_err(&mdc800->dev->dev,
+			"request USB irq fails (submit_retval=%i).\n", retval);
 		errn = -EIO;
 		goto error_out;
 	}
@@ -735,7 +739,9 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
 				mdc800->download_urb->dev = mdc800->dev;
 				retval = usb_submit_urb (mdc800->download_urb, GFP_KERNEL);
 				if (retval) {
-					err ("Can't submit download urb (retval=%i)",retval);
+					dev_err(&mdc800->dev->dev,
+						"Can't submit download urb "
+						"(retval=%i)\n", retval);
 					mutex_unlock(&mdc800->io_lock);
 					return len-left;
 				}
@@ -744,7 +750,10 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
 				mdc800->downloaded = 0;
 				if (mdc800->download_urb->status != 0)
 				{
-					err ("request download-bytes fails (status=%i)",mdc800->download_urb->status);
+					dev_err(&mdc800->dev->dev,
+						"request download-bytes fails "
+						"(status=%i)\n",
+						mdc800->download_urb->status);
 					mutex_unlock(&mdc800->io_lock);
 					return len-left;
 				}
@@ -841,7 +850,8 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
 
 			if (mdc800_usb_waitForIRQ (0,TO_GET_READY))
 			{
-				err ("Camera didn't get ready.\n");
+				dev_err(&mdc800->dev->dev,
+					"Camera didn't get ready.\n");
 				mutex_unlock(&mdc800->io_lock);
 				return -EIO;
 			}
@@ -853,7 +863,9 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
 			mdc800->write_urb->dev = mdc800->dev;
 			retval = usb_submit_urb (mdc800->write_urb, GFP_KERNEL);
 			if (retval) {
-				err ("submitting write urb fails (retval=%i)", retval);
+				dev_err(&mdc800->dev->dev,
+					"submitting write urb fails "
+					"(retval=%i)\n", retval);
 				mutex_unlock(&mdc800->io_lock);
 				return -EIO;
 			}
@@ -872,7 +884,9 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
 				case 0x3e: /* Take shot in Fine Mode (WCam Mode) */
 					if (mdc800->pic_len < 0)
 					{
-						err ("call 0x07 before 0x05,0x3e");
+						dev_err(&mdc800->dev->dev,
+							"call 0x07 before "
+							"0x05,0x3e\n");
 						mdc800->state=READY;
 						mutex_unlock(&mdc800->io_lock);
 						return -EIO;
@@ -892,7 +906,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
 
 						if (mdc800_usb_waitForIRQ (1,TO_READ_FROM_IRQ))
 						{
-							err ("requesting answer from irq fails");
+							dev_err(&mdc800->dev->dev, "requesting answer from irq fails\n");
 							mutex_unlock(&mdc800->io_lock);
 							return -EIO;
 						}
@@ -920,7 +934,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
 					{
 						if (mdc800_usb_waitForIRQ (0,TO_DEFAULT_COMMAND))
 						{
-							err ("Command Timeout.");
+							dev_err(&mdc800->dev->dev, "Command Timeout.\n");
 							mutex_unlock(&mdc800->io_lock);
 							return -EIO;
 						}
@@ -1031,7 +1045,7 @@ cleanup_on_fail:
 
 	if (mdc800 != NULL)
 	{
-		err ("can't alloc memory!");
+		printk(KERN_ERR "mdc800: can't alloc memory!\n");
 
 		kfree(mdc800->download_urb_buffer);
 		kfree(mdc800->write_urb_buffer);

drivers/usb/storage/onetouch.c

@@ -78,8 +78,8 @@ static void usb_onetouch_irq(struct urb *urb)
 resubmit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
-		err ("can't resubmit intr, %s-%s/input0, retval %d",
-			onetouch->udev->bus->bus_name,
+		dev_err(&dev->dev, "can't resubmit intr, %s-%s/input0, "
+			"retval %d\n", onetouch->udev->bus->bus_name,
 			onetouch->udev->devpath, retval);
 }
 
@@ -90,7 +90,7 @@ static int usb_onetouch_open(struct input_dev *dev)
 	onetouch->is_open = 1;
 	onetouch->irq->dev = onetouch->udev;
 	if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
-		err("usb_submit_urb failed");
+		dev_err(&dev->dev, "usb_submit_urb failed\n");
 		return -EIO;
 	}
 
@@ -117,7 +117,8 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action)
 			break;
 		case US_RESUME:
 			if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
-				err("usb_submit_urb failed");
+				dev_err(&onetouch->irq->dev->dev,
+					"usb_submit_urb failed\n");
 			break;
 		default:
 			break;