Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable

MAINTAINERS

@@ -992,6 +992,11 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/TETON BGA MACHINE SUPPORT
+M:	Mark F. Brown <mark.brown314@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+
 ARM/THECUS N2100 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/Kconfig

@@ -510,6 +510,7 @@ config ARCH_MMP
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
+	select SPARSE_IRQ
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
@@ -587,6 +588,7 @@ config ARCH_PXA
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
+	select SPARSE_IRQ
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 

arch/arm/mach-mmp/Kconfig

@@ -57,6 +57,13 @@ config MACH_MARVELL_JASPER
 	  PXA910-based development board. Since MMP2 is compatible to
 	  ARMv6 architecture.
 
+config MACH_TETON_BGA
+	bool "Marvell's PXA168 Teton BGA Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Teton BGA Development Board.
+
 endmenu
 
 config CPU_PXA168

arch/arm/mach-mmp/Makefile

@@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
+obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o

arch/arm/mach-mmp/aspenite.c

@@ -16,6 +16,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -23,6 +24,9 @@
 #include <mach/mfp-pxa168.h>
 #include <mach/pxa168.h>
 #include <mach/gpio.h>
+#include <video/pxa168fb.h>
+#include <linux/input.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "common.h"
 
@@ -66,6 +70,43 @@ static unsigned long common_pin_config[] __initdata = {
 	GPIO115_I2S_BCLK,
 	GPIO116_I2S_RXD,
 	GPIO117_I2S_TXD,
+
+	/* LCD */
+	GPIO56_LCD_FCLK_RD,
+	GPIO57_LCD_LCLK_A0,
+	GPIO58_LCD_PCLK_WR,
+	GPIO59_LCD_DENA_BIAS,
+	GPIO60_LCD_DD0,
+	GPIO61_LCD_DD1,
+	GPIO62_LCD_DD2,
+	GPIO63_LCD_DD3,
+	GPIO64_LCD_DD4,
+	GPIO65_LCD_DD5,
+	GPIO66_LCD_DD6,
+	GPIO67_LCD_DD7,
+	GPIO68_LCD_DD8,
+	GPIO69_LCD_DD9,
+	GPIO70_LCD_DD10,
+	GPIO71_LCD_DD11,
+	GPIO72_LCD_DD12,
+	GPIO73_LCD_DD13,
+	GPIO74_LCD_DD14,
+	GPIO75_LCD_DD15,
+	GPIO76_LCD_DD16,
+	GPIO77_LCD_DD17,
+	GPIO78_LCD_DD18,
+	GPIO79_LCD_DD19,
+	GPIO80_LCD_DD20,
+	GPIO81_LCD_DD21,
+	GPIO82_LCD_DD22,
+	GPIO83_LCD_DD23,
+
+	/* Keypad */
+	GPIO109_KP_MKIN1,
+	GPIO110_KP_MKIN0,
+	GPIO111_KP_MKOUT7,
+	GPIO112_KP_MKOUT6,
+	GPIO121_KP_MKIN4,
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -134,6 +175,51 @@ static struct i2c_board_info aspenite_i2c_info[] __initdata = {
 	{ I2C_BOARD_INFO("wm8753", 0x1b), },
 };
 
+static struct fb_videomode video_modes[] = {
+	[0] = {
+		.pixclock	= 30120,
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.hsync_len	= 1,
+		.left_margin	= 215,
+		.right_margin	= 40,
+		.vsync_len	= 1,
+		.upper_margin	= 34,
+		.lower_margin	= 10,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+	},
+};
+
+struct pxa168fb_mach_info aspenite_lcd_info = {
+	.id			= "Graphic Frame",
+	.modes			= video_modes,
+	.num_modes		= ARRAY_SIZE(video_modes),
+	.pix_fmt		= PIX_FMT_RGB565,
+	.io_pin_allocation_mode = PIN_MODE_DUMB_24,
+	.dumb_mode		= DUMB_MODE_RGB888,
+	.active			= 1,
+	.panel_rbswap		= 0,
+	.invert_pixclock	= 0,
+};
+
+static unsigned int aspenite_matrix_key_map[] = {
+	KEY(0, 6, KEY_UP),	/* SW 4 */
+	KEY(0, 7, KEY_DOWN),	/* SW 5 */
+	KEY(1, 6, KEY_LEFT),	/* SW 6 */
+	KEY(1, 7, KEY_RIGHT),	/* SW 7 */
+	KEY(4, 6, KEY_ENTER),	/* SW 8 */
+	KEY(4, 7, KEY_ESC),	/* SW 9 */
+};
+
+static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
+	.matrix_key_rows	= 5,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= aspenite_matrix_key_map,
+	.matrix_key_map_size	= ARRAY_SIZE(aspenite_matrix_key_map),
+	.debounce_interval	= 30,
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -143,6 +229,8 @@ static void __init common_init(void)
 	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
 	pxa168_add_ssp(1);
 	pxa168_add_nand(&aspenite_nand_info);
+	pxa168_add_fb(&aspenite_lcd_info);
+	pxa168_add_keypad(&aspenite_keypad_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
@@ -152,6 +240,7 @@ MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
 	.phys_io        = APB_PHYS_BASE,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
@@ -161,6 +250,7 @@ MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
 	.phys_io        = APB_PHYS_BASE,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,

arch/arm/mach-mmp/common.c

@@ -10,13 +10,20 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <mach/addr-map.h>
+#include <mach/cputype.h>
 
 #include "common.h"
 
+#define MMP_CHIPID	(AXI_VIRT_BASE + 0x82c00)
+
+unsigned int mmp_chip_id;
+EXPORT_SYMBOL(mmp_chip_id);
+
 static struct map_desc standard_io_desc[] __initdata = {
 	{
 		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
@@ -34,4 +41,7 @@ static struct map_desc standard_io_desc[] __initdata = {
 void __init mmp_map_io(void)
 {
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+
+	/* this is early, initialize mmp_chip_id here */
+	mmp_chip_id = __raw_readl(MMP_CHIPID);
 }

arch/arm/mach-mmp/flint.c

@@ -16,6 +16,7 @@
 #include <linux/smc91x.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -25,6 +26,8 @@
 
 #include "common.h"
 
+#define FLINT_NR_IRQS	(IRQ_BOARD_START + 48)
+
 static unsigned long flint_pin_config[] __initdata = {
 	/* UART1 */
 	GPIO45_UART1_RXD,
@@ -116,6 +119,7 @@ MACHINE_START(FLINT, "Flint Development Platform")
 	.phys_io        = APB_PHYS_BASE,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= FLINT_NR_IRQS,
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = flint_init,

arch/arm/mach-mmp/include/mach/cputype.h

@@ -4,36 +4,51 @@
 #include <asm/cputype.h>
 
 /*
- *  CPU   Stepping   OLD_ID       CPU_ID      CHIP_ID
+ *  CPU   Stepping   CPU_ID      CHIP_ID
  *
- * PXA168    A0    0x41159263   0x56158400   0x00A0A333
- * PXA910    Y0    0x41159262   0x56158000   0x00F0C910
- * MMP2	     Z0			0x560f5811
+ * PXA168    S0    0x56158400   0x0000C910
+ * PXA168    A0    0x56158400   0x00A0A168
+ * PXA910    Y1    0x56158400   0x00F2C920
+ * PXA910    A0    0x56158400   0x00F2C910
+ * PXA910    A1    0x56158400   0x00A0C910
+ * PXA920    Y0    0x56158400   0x00F2C920
+ * PXA920    A0    0x56158400   0x00A0C920
+ * PXA920    A1    0x56158400   0x00A1C920
+ * MMP2	     Z0	   0x560f5811   0x00F00410
+ * MMP2      Z1    0x560f5811   0x00E00410
+ * MMP2      A0    0x560f5811   0x00A0A610
  */
 
+extern unsigned int mmp_chip_id;
+
 #ifdef CONFIG_CPU_PXA168
-#  define __cpu_is_pxa168(id)	\
-	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+static inline int cpu_is_pxa168(void)
+{
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
+		((mmp_chip_id & 0xfff) == 0x168);
+}
 #else
-#  define __cpu_is_pxa168(id)	(0)
+#define cpu_is_pxa168()	(0)
 #endif
 
+/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */
 #ifdef CONFIG_CPU_PXA910
-#  define __cpu_is_pxa910(id)	\
-	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
+static inline int cpu_is_pxa910(void)
+{
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
+		(((mmp_chip_id & 0xfff) == 0x910) ||
+		 ((mmp_chip_id & 0xfff) == 0x920));
+}
 #else
-#  define __cpu_is_pxa910(id)	(0)
+#define cpu_is_pxa910()	(0)
 #endif
 
 #ifdef CONFIG_CPU_MMP2
-#  define __cpu_is_mmp2(id)	\
-	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; })
+static inline int cpu_is_mmp2(void)
+{
+	return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
 #else
-#  define __cpu_is_mmp2(id)	(0)
+#define cpu_is_mmp2()	(0)
 #endif
 
-#define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
-#define cpu_is_pxa910()		({ __cpu_is_pxa910(read_cpuid_id()); })
-#define cpu_is_mmp2()		({ __cpu_is_mmp2(read_cpuid_id()); })
-
 #endif /* __ASM_MACH_CPUTYPE_H */

arch/arm/mach-mmp/include/mach/irqs.h

@@ -222,10 +222,8 @@
 #define IRQ_GPIO_NUM			192
 #define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
 
-/* Board IRQ - 64 by default, increase if not enough */
 #define IRQ_BOARD_START			(IRQ_GPIO_START + IRQ_GPIO_NUM)
-#define IRQ_BOARD_END			(IRQ_BOARD_START + 64)
 
-#define NR_IRQS				(IRQ_BOARD_END)
+#define NR_IRQS				(IRQ_BOARD_START)
 
 #endif /* __ASM_MACH_IRQS_H */

arch/arm/mach-mmp/include/mach/mfp-pxa168.h

@@ -289,4 +289,11 @@
 #define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
 #define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
 
+/* Keypad */
+#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
+#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
+#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
+#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
+#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */

arch/arm/mach-mmp/include/mach/pxa168.h

@@ -5,11 +5,15 @@ struct sys_timer;
 
 extern struct sys_timer pxa168_timer;
 extern void __init pxa168_init_irq(void);
+extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
+#include <video/pxa168fb.h>
+#include <plat/pxa27x_keypad.h>
+#include <mach/cputype.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -25,6 +29,8 @@ extern struct pxa_device_desc pxa168_device_ssp3;
 extern struct pxa_device_desc pxa168_device_ssp4;
 extern struct pxa_device_desc pxa168_device_ssp5;
 extern struct pxa_device_desc pxa168_device_nand;
+extern struct pxa_device_desc pxa168_device_fb;
+extern struct pxa_device_desc pxa168_device_keypad;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -97,4 +103,18 @@ static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
 {
 	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
 }
+
+static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
+{
+	return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
+}
+
+static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
+{
+	if (cpu_is_pxa168())
+		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
+
+	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_PXA168_H */

arch/arm/mach-mmp/include/mach/regs-apmu.h

@@ -33,4 +33,16 @@
 #define APMU_FNRST_DIS	(1 << 1)
 #define APMU_AXIRST_DIS	(1 << 0)
 
+/* Wake Clear Register */
+#define APMU_WAKE_CLR	APMU_REG(0x07c)
+
+#define APMU_PXA168_KP_WAKE_CLR		(1 << 7)
+#define APMU_PXA168_CFI_WAKE_CLR	(1 << 6)
+#define APMU_PXA168_XD_WAKE_CLR		(1 << 5)
+#define APMU_PXA168_MSP_WAKE_CLR	(1 << 4)
+#define APMU_PXA168_SD4_WAKE_CLR	(1 << 3)
+#define APMU_PXA168_SD3_WAKE_CLR	(1 << 2)
+#define APMU_PXA168_SD2_WAKE_CLR	(1 << 1)
+#define APMU_PXA168_SD1_WAKE_CLR	(1 << 0)
+
 #endif /* __ASM_MACH_REGS_APMU_H */

arch/arm/mach-mmp/include/mach/teton_bga.h

@@ -0,0 +1,27 @@
+/*
+ *  linux/arch/arm/mach-mmp/include/mach/teton_bga.h
+ *
+ *  Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+#ifndef __ASM_MACH_TETON_BGA_H
+#define __ASM_MACH_TETON_BGA_H
+
+/* GPIOs */
+#define MMC_PWENA_GPIO		27
+#define USBHPENB_GPIO		55
+#define RTC_INT_GPIO		78
+#define LCD_VBLK_EN_GPIO	79
+#define LCD_DVDD_EN_GPIO	80
+#define RST_WIFI_GPIO		81
+#define CF_PWEN_GPIO		82
+#define USB_OC_GPIO		83
+#define PWM_GPIO		84
+#define USBHPENA_GPIO		85
+#define TS_INT_GPIO		86
+#define CIR_GPIO		108
+
+#endif /* __ASM_MACH_TETON_BGA_H */

arch/arm/mach-mmp/jasper.c

@@ -18,16 +18,18 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8649.h>
 #include <linux/mfd/max8925.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-mmp2.h>
 #include <mach/mmp2.h>
-#include <mach/irqs.h>
 
 #include "common.h"
 
+#define JASPER_NR_IRQS		(IRQ_BOARD_START + 48)
+
 static unsigned long jasper_pin_config[] __initdata = {
 	/* UART1 */
 	GPIO29_UART1_RXD,
@@ -137,6 +139,7 @@ MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
 	.phys_io        = APB_PHYS_BASE,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= JASPER_NR_IRQS,
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = jasper_init,

arch/arm/mach-mmp/pxa168.c

@@ -77,8 +77,10 @@ static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
 static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
 static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
+static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
 static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
@@ -96,6 +98,8 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
 	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -132,6 +136,16 @@ struct sys_timer pxa168_timer = {
 	.init	= pxa168_timer_init,
 };
 
+void pxa168_clear_keypad_wakeup(void)
+{
+	uint32_t val;
+	uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
+
+	/* wake event clear is needed in order to clear keypad interrupt */
+	val = __raw_readl(APMU_WAKE_CLR);
+	__raw_writel(val |  mask, APMU_WAKE_CLR);
+}
+
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
@@ -147,3 +161,5 @@ PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
 PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
 PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
 PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
+PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
+PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);

arch/arm/mach-mmp/teton_bga.c

@@ -0,0 +1,91 @@
+/*
+ *  linux/arch/arm/mach-mmp/teton_bga.c
+ *
+ *  Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ *  Author: Mark F. Brown <mark.brown314@gmail.com>
+ *
+ *  This code is based on aspenite.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <plat/pxa27x_keypad.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/teton_bga.h>
+
+#include "common.h"
+
+static unsigned long teton_bga_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO107_UART1_TXD,
+	GPIO108_UART1_RXD,
+
+	/* Keypad */
+	GPIO109_KP_MKIN1,
+	GPIO110_KP_MKIN0,
+	GPIO111_KP_MKOUT7,
+	GPIO112_KP_MKOUT6,
+
+	/* I2C Bus */
+	GPIO105_CI2C_SDA,
+	GPIO106_CI2C_SCL,
+
+	/* RTC */
+	GPIO78_GPIO,
+};
+
+static unsigned int teton_bga_matrix_key_map[] = {
+	KEY(0, 6, KEY_ESC),
+	KEY(0, 7, KEY_ENTER),
+	KEY(1, 6, KEY_LEFT),
+	KEY(1, 7, KEY_RIGHT),
+};
+
+static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
+	.matrix_key_rows        = 2,
+	.matrix_key_cols        = 8,
+	.matrix_key_map         = teton_bga_matrix_key_map,
+	.matrix_key_map_size    = ARRAY_SIZE(teton_bga_matrix_key_map),
+	.debounce_interval      = 30,
+};
+
+static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+		.irq = gpio_to_irq(RTC_INT_GPIO)
+	},
+};
+
+static void __init teton_bga_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
+
+	/* on-chip devices */
+	pxa168_add_uart(1);
+	pxa168_add_keypad(&teton_bga_keypad_info);
+	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
+}
+
+MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = teton_bga_init,
+MACHINE_END

arch/arm/mach-mmp/ttc_dkb.c

@@ -14,6 +14,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -24,6 +25,8 @@
 
 #include "common.h"
 
+#define TTCDKB_NR_IRQS		(IRQ_BOARD_START + 24)
+
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,
@@ -125,6 +128,7 @@ MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
 	.phys_io        = APB_PHYS_BASE,
 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= TTCDKB_NR_IRQS,
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
 	.init_machine   = ttc_dkb_init,

arch/arm/mach-pxa/Kconfig

@@ -8,19 +8,16 @@ config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
 	select PXA25x
 	select SA1111
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_ZYLONITE
 	bool
 	select PXA3xx
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_ZYLONITE300
 	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -44,6 +41,10 @@ config MACH_TAVOREVB
 	select PXA3xx
 	select CPU_PXA930
 
+config MACH_TAVOREVB3
+	bool "PXA95x Development Platform (aka TavorEVB III)"
+	select CPU_PXA950
+
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select PXA3xx
@@ -61,7 +62,6 @@ config ARCH_VIPER
 	select ISA
 	select I2C_GPIO
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 	select PXA_HAVE_ISA_IRQS
 	select ARCOM_PCMCIA
 
@@ -69,7 +69,6 @@ config MACH_ARCOM_ZEUS
 	bool "Arcom/Eurotech ZEUS SBC"
 	select PXA27x
 	select ISA
-	select PXA_HAVE_BOARD_IRQS
 	select PXA_HAVE_ISA_IRQS
 	select ARCOM_PCMCIA
 
@@ -77,7 +76,6 @@ config MACH_BALLOON3
 	bool "Balloon 3 board"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CSB726
 	bool "Enable Cogent CSB726 System On a Module"
@@ -140,13 +138,11 @@ config MACH_INTELMOTE2
 	bool "Intel Mote 2 Platform"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_STARGATE2
 	bool "Intel Stargate 2 Platform"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_XCEP
 	bool "Iskratel Electronics XCEP"
@@ -206,13 +202,11 @@ config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
@@ -247,7 +241,6 @@ config MACH_COLIBRI_PXA270_INCOME
 	depends on MACH_COLIBRI
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
@@ -274,7 +267,6 @@ config MACH_H4700
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_H5000
 	bool "HP iPAQ h5000"
@@ -289,7 +281,6 @@ config MACH_MAGICIAN
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
@@ -307,7 +298,6 @@ config PXA_EZX
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
@@ -478,7 +468,6 @@ config MACH_POODLE
 	depends on PXA_SHARPSL
 	select PXA25x
 	select SHARP_LOCOMO
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -523,7 +512,6 @@ config MACH_TOSA
 	bool "Enable Sharp SL-6000x (Tosa) Support"
 	depends on PXA_SHARPSL
 	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
 
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
@@ -552,7 +540,6 @@ config MACH_ICONTROL
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -606,7 +593,6 @@ config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 endmenu
 
@@ -643,6 +629,7 @@ config CPU_PXA300
 config CPU_PXA310
 	bool
 	select CPU_PXA300
+	select PXA310_ULPI if USB_ULPI
 	help
 	  PXA310 (codename Monahans-LV)
 
@@ -692,10 +679,10 @@ config SHARPSL_PM_MAX1111
 	select HWMON
 	select SENSORS_MAX1111
 
-config PXA_HAVE_BOARD_IRQS
+config PXA_HAVE_ISA_IRQS
 	bool
 
-config PXA_HAVE_ISA_IRQS
+config PXA310_ULPI
 	bool
 
 endif

arch/arm/mach-pxa/Makefile

@@ -18,7 +18,7 @@ endif
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
+obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
@@ -32,6 +32,7 @@ obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
 obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_TAVOREVB3)	+= tavorevb3.o
 obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
 # 3rd Party Dev Platforms

arch/arm/mach-pxa/balloon3.c

@@ -68,42 +68,6 @@ static unsigned long balloon3_pin_config[] __initdata = {
 
 	/* Reset, configured as GPIO wakeup source */
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* LEDs */
-	GPIO9_GPIO,	/* NAND activity LED */
-	GPIO10_GPIO,	/* Heartbeat LED */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	/* USB Host */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
 };
 
 /******************************************************************************
@@ -131,6 +95,34 @@ int __init parse_balloon3_features(char *arg)
 }
 early_param("balloon3_features", parse_balloon3_features);
 
+/******************************************************************************
+ * Compact Flash slot
+ ******************************************************************************/
+#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static unsigned long balloon3_cf_pin_config[] __initdata = {
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+static void __init balloon3_cf_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_CF))
+		return;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
+}
+#else
+static inline void balloon3_cf_init(void) {}
+#endif
+
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
@@ -179,6 +171,15 @@ static inline void balloon3_nor_init(void) {}
  ******************************************************************************/
 #if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
 	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static unsigned long balloon3_ac97_pin_config[] __initdata = {
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+};
+
 static struct ucb1400_pdata vpac270_ucb1400_pdata = {
 	.irq		= IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
 };
@@ -197,6 +198,7 @@ static void __init balloon3_ts_init(void)
 	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
 		return;
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
 	pxa_set_ac97_info(NULL);
 	platform_device_register(&balloon3_ucb1400_device);
 }
@@ -208,6 +210,11 @@ static inline void balloon3_ts_init(void) {}
  * Framebuffer
  ******************************************************************************/
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static unsigned long balloon3_lcd_pin_config[] __initdata = {
+	GPIOxx_LCD_TFT_16BPP,
+	GPIO99_GPIO,
+};
+
 static struct pxafb_mode_info balloon3_lcd_modes[] = {
 	{
 		.pixclock		= 38000,
@@ -242,6 +249,8 @@ static void __init balloon3_lcd_init(void)
 	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
 		return;
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+
 	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
 	if (ret) {
 		pr_err("Requesting BKL-ON GPIO failed!\n");
@@ -271,6 +280,15 @@ static inline void balloon3_lcd_init(void) {}
  * SD/MMC card controller
  ******************************************************************************/
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static unsigned long balloon3_mmc_pin_config[] __initdata = {
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+};
+
 static struct pxamci_platform_data balloon3_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_card_detect	= -1,
@@ -281,6 +299,7 @@ static struct pxamci_platform_data balloon3_mci_platform_data = {
 
 static void __init balloon3_mmc_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
 	pxa_set_mci_info(&balloon3_mci_platform_data);
 }
 #else
@@ -339,6 +358,11 @@ static inline void balloon3_irda_init(void) {}
  * USB Host
  ******************************************************************************/
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static unsigned long balloon3_uhc_pin_config[] __initdata = {
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+};
+
 static struct pxaohci_platform_data balloon3_ohci_info = {
 	.port_mode	= PMM_PERPORT_MODE,
 	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
@@ -348,6 +372,7 @@ static void __init balloon3_uhc_init(void)
 {
 	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
 		return;
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
 	pxa_set_ohci_info(&balloon3_ohci_info);
 }
 #else
@@ -358,6 +383,11 @@ static inline void balloon3_uhc_init(void) {}
  * LEDs
  ******************************************************************************/
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static unsigned long balloon3_led_pin_config[] __initdata = {
+	GPIO9_GPIO,	/* NAND activity LED */
+	GPIO10_GPIO,	/* Heartbeat LED */
+};
+
 struct gpio_led balloon3_gpio_leds[] = {
 	{
 		.name			= "balloon3:green:idle",
@@ -436,6 +466,7 @@ static struct platform_device balloon3_pcf_leds = {
 
 static void __init balloon3_leds_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
 	platform_device_register(&balloon3_leds);
 	platform_device_register(&balloon3_pcf_leds);
 }
@@ -757,6 +788,7 @@ static void __init balloon3_init(void)
 	balloon3_ts_init();
 	balloon3_udc_init();
 	balloon3_uhc_init();
+	balloon3_cf_init();
 }
 
 static struct map_desc balloon3_io_desc[] __initdata = {
@@ -779,6 +811,7 @@ MACHINE_START(BALLOON3, "Balloon3")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= balloon3_map_io,
+	.nr_irqs	= BALLOON3_NR_IRQS,
 	.init_irq	= balloon3_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= balloon3_init,

arch/arm/mach-pxa/cm-x2xx.c

@@ -33,6 +33,9 @@
 extern void cmx255_init(void);
 extern void cmx270_init(void);
 
+/* reserve IRQs for IT8152 */
+#define CMX2XX_NR_IRQS		(IRQ_BOARD_START + 40)
+
 /* virtual addresses for statically mapped regions */
 #define CMX2XX_VIRT_BASE	(0xe8000000)
 #define CMX2XX_IT8152_VIRT	(CMX2XX_VIRT_BASE)
@@ -514,6 +517,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= cmx2xx_map_io,
+	.nr_irqs	= CMX2XX_NR_IRQS,
 	.init_irq	= cmx2xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cmx2xx_init,

arch/arm/mach-pxa/cm-x300.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
@@ -50,6 +51,7 @@
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <mach/audio.h>
+#include <mach/pxa3xx-u2d.h>
 
 #include <asm/mach/map.h>
 
@@ -68,6 +70,8 @@
 #define GPIO97_RTC_RD		(97)
 #define GPIO98_RTC_IO		(98)
 
+#define GPIO_ULPI_PHY_RST	(127)
+
 static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
@@ -472,6 +476,78 @@ static void __init cm_x300_init_mmc(void)
 static inline void cm_x300_init_mmc(void) {}
 #endif
 
+#if defined(CONFIG_PXA310_ULPI)
+static struct clk *pout_clk;
+
+static int cm_x300_ulpi_phy_reset(void)
+{
+	int err;
+
+	/* reset the PHY */
+	err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset");
+	if (err) {
+		pr_err("%s: failed to request ULPI reset GPIO: %d\n",
+		       __func__, err);
+		return err;
+	}
+
+	gpio_direction_output(GPIO_ULPI_PHY_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
+	msleep(10);
+
+	gpio_free(GPIO_ULPI_PHY_RST);
+
+	return 0;
+}
+
+static inline int cm_x300_u2d_init(struct device *dev)
+{
+	int err = 0;
+
+	if (cpu_is_pxa310()) {
+		/* CLK_POUT is connected to the ULPI PHY */
+		pout_clk = clk_get(NULL, "CLK_POUT");
+		if (IS_ERR(pout_clk)) {
+			err = PTR_ERR(pout_clk);
+			pr_err("%s: failed to get CLK_POUT: %d\n",
+			       __func__, err);
+			return err;
+		}
+		clk_enable(pout_clk);
+
+		err = cm_x300_ulpi_phy_reset();
+		if (err) {
+			clk_disable(pout_clk);
+			clk_put(pout_clk);
+		}
+	}
+
+	return err;
+}
+
+static void cm_x300_u2d_exit(struct device *dev)
+{
+	if (cpu_is_pxa310()) {
+		clk_disable(pout_clk);
+		clk_put(pout_clk);
+	}
+}
+
+static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
+	.ulpi_mode	= ULPI_SER_6PIN,
+	.init		= cm_x300_u2d_init,
+	.exit		= cm_x300_u2d_exit,
+};
+
+static void cm_x300_init_u2d(void)
+{
+	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
+}
+#else
+static inline void cm_x300_init_u2d(void) {}
+#endif
+
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cm_x300_ohci_init(struct device *dev)
 {
@@ -754,6 +830,7 @@ static void __init cm_x300_init(void)
 	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
 	cm_x300_init_lcd();
+	cm_x300_init_u2d();
 	cm_x300_init_ohci();
 	cm_x300_init_mmc();
 	cm_x300_init_nand();

arch/arm/mach-pxa/cpufreq-pxa3xx.c

@@ -159,7 +159,7 @@ static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
 
 static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
 {
-	return get_clk_frequency_khz(0);
+	return pxa3xx_get_clk_frequency_khz(0);
 }
 
 static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
@@ -212,7 +212,8 @@ static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.min_freq = 104000;
 	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->cur = policy->min = policy->max = get_clk_frequency_khz(0);
+	policy->max = pxa3xx_get_clk_frequency_khz(0);
+	policy->cur = policy->min = policy->max;
 
 	if (cpu_is_pxa300() || cpu_is_pxa310())
 		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));

arch/arm/mach-pxa/devices.c

@@ -6,11 +6,12 @@
 
 #include <asm/pmu.h>
 #include <mach/udc.h>
+#include <mach/pxa3xx-u2d.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
@@ -134,6 +135,33 @@ struct platform_device pxa27x_device_udc = {
 	}
 };
 
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_u2d_resources[] = {
+	[0] = {
+		.start	= 0x54100000,
+		.end	= 0x54100fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_USB2,
+		.end	= IRQ_USB2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_u2d = {
+	.name		= "pxa3xx-u2d",
+	.id		= -1,
+	.resource	= pxa3xx_u2d_resources,
+	.num_resources	= ARRAY_SIZE(pxa3xx_u2d_resources),
+};
+
+void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_u2d, info);
+}
+#endif /* CONFIG_PXA3xx */
+
 static struct resource pxafb_resources[] = {
 	[0] = {
 		.start	= 0x44000000,

arch/arm/mach-pxa/devices.h

@@ -4,6 +4,7 @@ extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
 extern struct platform_device pxa25x_device_udc;
 extern struct platform_device pxa27x_device_udc;
+extern struct platform_device pxa3xx_device_u2d;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
 extern struct platform_device pxa_device_btuart;

arch/arm/mach-pxa/em-x270.c

@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/pxa2xx_spi.h>

arch/arm/mach-pxa/eseries.c

@@ -29,6 +29,7 @@
 
 #include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
+#include <mach/eseries-irq.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/udc.h>
@@ -183,6 +184,7 @@ MACHINE_START(E330, "Toshiba e330")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e330_init,
@@ -233,6 +235,7 @@ MACHINE_START(E350, "Toshiba e350")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e350_init,
@@ -356,6 +359,7 @@ MACHINE_START(E400, "Toshiba e400")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e400_init,
@@ -545,6 +549,7 @@ MACHINE_START(E740, "Toshiba e740")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e740_init,
@@ -737,6 +742,7 @@ MACHINE_START(E750, "Toshiba e750")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e750_init,
@@ -933,6 +939,7 @@ MACHINE_START(E800, "Toshiba e800")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e800_init,

arch/arm/mach-pxa/ezx.c

@@ -32,12 +32,14 @@
 #include <mach/ohci.h>
 #include <plat/i2c.h>
 #include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/camera.h>
 
 #include "devices.h"
 #include "generic.h"
 
+#define EZX_NR_IRQS			(IRQ_BOARD_START + 24)
+
 #define GPIO12_A780_FLIP_LID 		12
 #define GPIO15_A1200_FLIP_LID 		15
 #define GPIO15_A910_FLIP_LID 		15
@@ -800,6 +802,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a780_init,
@@ -866,6 +869,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e680_init,
@@ -932,6 +936,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a1200_init,
@@ -1124,6 +1129,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a910_init,
@@ -1190,6 +1196,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e6_init,
@@ -1230,6 +1237,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e2_init,

arch/arm/mach-pxa/generic.c

@@ -66,8 +66,7 @@ unsigned int get_clk_frequency_khz(int info)
 		return pxa25x_get_clk_frequency_khz(info);
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_clk_frequency_khz(info);
-	else
-		return pxa3xx_get_clk_frequency_khz(info);
+	return 0;
 }
 EXPORT_SYMBOL(get_clk_frequency_khz);
 
@@ -80,8 +79,7 @@ unsigned int get_memclk_frequency_10khz(void)
 		return pxa25x_get_memclk_frequency_10khz();
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_memclk_frequency_10khz();
-	else
-		return pxa3xx_get_memclk_frequency_10khz();
+	return 0;
 }
 EXPORT_SYMBOL(get_memclk_frequency_10khz);
 

arch/arm/mach-pxa/generic.h

@@ -54,11 +54,9 @@ static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
 
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
-extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
 extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
-#define pxa3xx_get_memclk_frequency_10khz()	(0)
 static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 

arch/arm/mach-pxa/hx4700.c

@@ -874,6 +874,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
 	.io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params  = 0xa0000100,
 	.map_io       = pxa_map_io,
+	.nr_irqs      = HX4700_NR_IRQS,
 	.init_irq     = pxa27x_init_irq,
 	.init_machine = hx4700_init,
 	.timer        = &pxa_timer,

arch/arm/mach-pxa/include/mach/balloon3.h

@@ -174,6 +174,8 @@ enum balloon3_features {
 #define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
 #define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
 
+#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 4)
+
 extern int balloon3_has(enum balloon3_features feature);
 
 #endif

arch/arm/mach-pxa/include/mach/eseries-irq.h

@@ -25,3 +25,4 @@
 #define TMIO_SD_IRQ     IRQ_TMIO(1)
 #define TMIO_USB_IRQ    IRQ_TMIO(2)
 
+#define ESERIES_NR_IRQS	(IRQ_BOARD_START + 16)

arch/arm/mach-pxa/include/mach/hx4700.h

@@ -17,6 +17,7 @@
 
 #define HX4700_ASIC3_GPIO_BASE	NR_BUILTIN_GPIO
 #define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+#define HX4700_NR_IRQS		(IRQ_BOARD_START + 70)
 
 /*
  * PXA GPIOs

arch/arm/mach-pxa/include/mach/irqs.h

@@ -117,48 +117,12 @@
 /*
  * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
- * these.  There will be 16 IRQs by default.  If it is not enough,
- * IRQ_BOARD_END is allowed be customized for each board, but keep
- * the numbers within sensible limits and in descending order, so
- * when multiple config options are selected, the maximum will be
- * used.
+ * these.
+ * By default, no board IRQ is reserved. It should be finished in
+ * custom board since sparse IRQ is already enabled.
  */
 #define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
 
-#if defined(CONFIG_MACH_H4700)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
-#elif defined(CONFIG_PXA_EZX)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 23)
-#else
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
-#endif
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_BOARD_END + 55)
-#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
-#define NR_IRQS			(IRQ_BOARD_END)
-#else
 #define NR_IRQS			(IRQ_BOARD_START)
-#endif
-
-/* add IT8152 IRQs beyond BOARD_END */
-#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_LAST_IRQ         (IRQ_BOARD_END + 40)
-
-#if NR_IRQS < (IT8152_LAST_IRQ+1)
-#undef NR_IRQS
-#define NR_IRQS (IT8152_LAST_IRQ+1)
-#endif
-
-#endif /* CONFIG_PCI_HOST_ITE8152 */
 
 #endif /* __ASM_MACH_IRQS_H */

arch/arm/mach-pxa/include/mach/littleton.h

@@ -10,4 +10,6 @@
 #define EXT0_GPIO_BASE	(NR_BUILTIN_GPIO)
 #define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
 
+#define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
+
 #endif /* __ASM_ARCH_LITTLETON_H */

arch/arm/mach-pxa/include/mach/lpd270.h

@@ -38,5 +38,6 @@
 #define LPD270_USBC_IRQ		LPD270_IRQ(2)
 #define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
 #define LPD270_AC97_IRQ		LPD270_IRQ(4)
+#define LPD270_NR_IRQS		(IRQ_BOARD_START + 5)
 
 #endif

arch/arm/mach-pxa/include/mach/lubbock.h

@@ -45,6 +45,9 @@
 #define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
 
+#define LUBBOCK_SA1111_IRQ_BASE	(IRQ_BOARD_START + 16)
+#define LUBBOCK_NR_IRQS		(IRQ_BOARD_START + 16 + 55)
+
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
 #endif

arch/arm/mach-pxa/include/mach/magician.h

@@ -71,6 +71,8 @@
 #define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
 #define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
 
+#define MAGICIAN_NR_IRQS	(IRQ_BOARD_START + 8)
+
 /*
  * CPLD EGPIOs
  */

arch/arm/mach-pxa/include/mach/mainstone.h

@@ -134,4 +134,6 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
+#define MAINSTONE_NR_IRQS	(IRQ_BOARD_START + 16)
+
 #endif

arch/arm/mach-pxa/include/mach/mfp-pxa930.h

@@ -69,6 +69,7 @@
 #define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
 #define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
 #define RDY_GPIO_62		MFP_CFG(RDY, AF0)
+#define PMIC_INT_GPIO83		MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
 
 /* Chip Select */
 #define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
@@ -92,6 +93,9 @@
 #define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
 #define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
 
+#define GPIO73_CI2C_SCL		MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
+#define GPIO74_CI2C_SDA		MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
+
 #define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
 #define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
 
@@ -345,6 +349,9 @@
 #define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
 #define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
 
+#define GPIO53_UART1_TXD	MFP_CFG(GPIO53, AF2)
+#define GPIO54_UART1_RXD	MFP_CFG(GPIO54, AF2)
+
 /* UART2 - BTUART */
 #define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
 #define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)

arch/arm/mach-pxa/include/mach/pcm027.h

@@ -30,6 +30,8 @@
 #define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
 #define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
 
+#define PCM027_NR_IRQS		(IRQ_BOARD_START + 32)
+
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO	0
 #define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)

arch/arm/mach-pxa/include/mach/poodle.h

@@ -85,6 +85,8 @@
 #define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
 #define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
 
+#define POODLE_NR_IRQS		(IRQ_BOARD_START + 4)	/* 4 for LoCoMo */
+
 extern struct platform_device poodle_locomo_device;
 
 #endif /* __ASM_ARCH_POODLE_H  */

arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h

@@ -0,0 +1,35 @@
+/*
+ * PXA3xx U2D header
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PXA310_U2D__
+#define __PXA310_U2D__
+
+#include <linux/usb/ulpi.h>
+
+struct pxa3xx_u2d_platform_data {
+
+#define ULPI_SER_6PIN	(1 << 0)
+#define ULPI_SER_3PIN	(1 << 1)
+	unsigned int ulpi_mode;
+
+	int (*init)(struct device *);
+	void (*exit)(struct device *);
+};
+
+
+/* Start PXA3xx U2D host */
+int pxa3xx_u2d_start_hc(struct usb_bus *host);
+/* Stop PXA3xx U2D host */
+void pxa3xx_u2d_stop_hc(struct usb_bus *host);
+
+extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
+
+#endif /* __PXA310_U2D__ */

arch/arm/mach-pxa/include/mach/tosa.h

@@ -20,6 +20,7 @@
 /* Jacket Scoop */
 #define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
 
+#define TOSA_NR_IRQS		(IRQ_BOARD_START + TC6393XB_NR_IRQS)
 /*
  * SCOOP2 internal GPIOs
  */

arch/arm/mach-pxa/include/mach/zeus.h

@@ -15,6 +15,8 @@
 #ifndef _MACH_ZEUS_H
 #define _MACH_ZEUS_H
 
+#define ZEUS_NR_IRQS		(IRQ_BOARD_START + 48)
+
 /* Physical addresses */
 #define ZEUS_FLASH_PHYS		PXA_CS0_PHYS
 #define ZEUS_ETH0_PHYS		PXA_CS1_PHYS

arch/arm/mach-pxa/include/mach/zylonite.h

@@ -5,6 +5,8 @@
 
 #define EXT_GPIO(x)		(128 + (x))
 
+#define ZYLONITE_NR_IRQS	(IRQ_BOARD_START + 32)
+
 /* the following variables are processor specific and initialized
  * by the corresponding zylonite_pxa3xx_init()
  */

arch/arm/mach-pxa/littleton.c

@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/littleton.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
@@ -441,6 +441,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
 	.boot_params	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= littleton_init,

arch/arm/mach-pxa/lpd270.c

@@ -509,6 +509,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= lpd270_map_io,
+	.nr_irqs	= LPD270_NR_IRQS,
 	.init_irq	= lpd270_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lpd270_init,

arch/arm/mach-pxa/lubbock.c

@@ -229,7 +229,7 @@ static struct resource sa1111_resources[] = {
 };
 
 static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= IRQ_BOARD_END,
+	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
 };
 
 static struct platform_device sa1111_device = {
@@ -560,6 +560,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= lubbock_map_io,
+	.nr_irqs	= LUBBOCK_NR_IRQS,
 	.init_irq	= lubbock_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lubbock_init,

arch/arm/mach-pxa/magician.c

@@ -768,6 +768,7 @@ MACHINE_START(MAGICIAN, "HTC Magician")
 	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
 	.map_io = pxa_map_io,
+	.nr_irqs = MAGICIAN_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.init_machine = magician_init,
 	.timer = &pxa_timer,

arch/arm/mach-pxa/mainstone.c

@@ -50,7 +50,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -628,6 +628,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= mainstone_map_io,
+	.nr_irqs	= MAINSTONE_NR_IRQS,
 	.init_irq	= mainstone_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= mainstone_init,

arch/arm/mach-pxa/mioa701.c

@@ -45,7 +45,7 @@
 
 #include <mach/pxa27x.h>
 #include <mach/regs-rtc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>

arch/arm/mach-pxa/palmld.c

@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
 

arch/arm/mach-pxa/palmt5.c

@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>

arch/arm/mach-pxa/palmtreo.c

@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>

arch/arm/mach-pxa/palmtx.c

@@ -43,7 +43,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>

arch/arm/mach-pxa/palmz72.c

@@ -41,7 +41,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>

arch/arm/mach-pxa/pcm027.c

@@ -262,6 +262,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pcm027_map_io,
+	.nr_irqs	= PCM027_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= pcm027_init,

arch/arm/mach-pxa/poodle.c

@@ -469,6 +469,7 @@ MACHINE_START(POODLE, "SHARP Poodle")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_poodle,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= poodle_init,

arch/arm/mach-pxa/pxa3xx-ulpi.c

@@ -0,0 +1,400 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
+ *             initial version: pxa310 USB Host mode support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-u2d.h>
+#include <mach/pxa3xx-u2d.h>
+
+struct pxa3xx_u2d_ulpi {
+	struct clk		*clk;
+	void __iomem		*mmio_base;
+
+	struct otg_transceiver	*otg;
+	unsigned int		ulpi_mode;
+};
+
+static struct pxa3xx_u2d_ulpi *u2d;
+
+static inline u32 u2d_readl(u32 reg)
+{
+	return __raw_readl(u2d->mmio_base + reg);
+}
+
+static inline void u2d_writel(u32 reg, u32 val)
+{
+	__raw_writel(val, u2d->mmio_base + reg);
+}
+
+#if defined(CONFIG_PXA310_ULPI)
+enum u2d_ulpi_phy_mode {
+	SYNCH		= 0,
+	CARKIT		= (1 << 0),
+	SER_3PIN	= (1 << 1),
+	SER_6PIN	= (1 << 2),
+	LOWPOWER	= (1 << 3),
+};
+
+static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
+{
+	return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
+}
+
+static int pxa310_ulpi_poll(void)
+{
+	int timeout = 50000;
+
+	while (timeout--) {
+		if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
+			return 0;
+
+		cpu_relax();
+	}
+
+	pr_warning("%s: ULPI access timed out!\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	int err;
+
+	if (pxa310_ulpi_get_phymode() != SYNCH) {
+		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+		return -EBUSY;
+	}
+
+	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
+	msleep(5);
+
+	err = pxa310_ulpi_poll();
+	if (err)
+		return err;
+
+	return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
+}
+
+static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	if (pxa310_ulpi_get_phymode() != SYNCH) {
+		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+		return -EBUSY;
+	}
+
+	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
+	msleep(5);
+
+	return pxa310_ulpi_poll();
+}
+
+struct otg_io_access_ops pxa310_ulpi_access_ops = {
+	.read	= pxa310_ulpi_read,
+	.write	= pxa310_ulpi_write,
+};
+
+static void pxa310_otg_transceiver_rtsm(void)
+{
+	u32 u2dotgcr;
+
+	/* put PHY to sync mode */
+	u2dotgcr = u2d_readl(U2DOTGCR);
+	u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID;
+	u2d_writel(U2DOTGCR, u2dotgcr);
+	msleep(10);
+
+	/* setup OTG sync mode */
+	u2dotgcr = u2d_readl(U2DOTGCR);
+	u2dotgcr |= U2DOTGCR_ULAF;
+	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+	u2d_writel(U2DOTGCR, u2dotgcr);
+}
+
+static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
+{
+	int err;
+
+	pxa310_otg_transceiver_rtsm();
+
+	err = otg_init(u2d->otg);
+	if (err) {
+		pr_err("OTG transceiver init failed");
+		return err;
+	}
+
+	err = otg_set_vbus(u2d->otg, 1);
+	if (err) {
+		pr_err("OTG transceiver VBUS set failed");
+		return err;
+	}
+
+	err = otg_set_host(u2d->otg, host);
+	if (err)
+		pr_err("OTG transceiver Host mode set failed");
+
+	return err;
+}
+
+static int pxa310_start_otg_hc(struct usb_bus *host)
+{
+	u32 u2dotgcr;
+	int err;
+
+	/* disable USB device controller */
+	u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
+	u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
+	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+
+	err = pxa310_start_otg_host_transcvr(host);
+	if (err)
+		return err;
+
+	/* set xceiver mode */
+	if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
+		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
+	else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
+		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
+
+	/* start OTG host controller */
+	u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
+	u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
+
+	return 0;
+}
+
+static void pxa310_stop_otg_hc(void)
+{
+	pxa310_otg_transceiver_rtsm();
+
+	otg_set_host(u2d->otg, NULL);
+	otg_set_vbus(u2d->otg, 0);
+	otg_shutdown(u2d->otg);
+}
+
+static void pxa310_u2d_setup_otg_hc(void)
+{
+	u32 u2dotgcr;
+
+	u2dotgcr = u2d_readl(U2DOTGCR);
+	u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
+	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+	u2d_writel(U2DOTGCR, u2dotgcr);
+	msleep(5);
+	u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
+	msleep(5);
+	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+}
+
+static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+	unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
+
+	if (pdata) {
+		if (pdata->ulpi_mode & ULPI_SER_6PIN)
+			ulpi_mode |= ULPI_IC_6PIN_SERIAL;
+		else if (pdata->ulpi_mode & ULPI_SER_3PIN)
+			ulpi_mode |= ULPI_IC_3PIN_SERIAL;
+	}
+
+	u2d->ulpi_mode = ulpi_mode;
+
+	u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
+	if (!u2d->otg)
+		return -ENOMEM;
+
+	u2d->otg->io_priv = u2d->mmio_base;
+
+	return 0;
+}
+
+static void pxa310_otg_exit(void)
+{
+	kfree(u2d->otg);
+}
+#else
+static inline void pxa310_u2d_setup_otg_hc(void) {}
+static inline int pxa310_start_otg_hc(struct usb_bus *host)
+{
+	return 0;
+}
+static inline void pxa310_stop_otg_hc(void) {}
+static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+	return 0;
+}
+static inline void pxa310_otg_exit(void) {}
+#endif /* CONFIG_PXA310_ULPI */
+
+int pxa3xx_u2d_start_hc(struct usb_bus *host)
+{
+	int err = 0;
+
+	/* In case the PXA3xx ULPI isn't used, do nothing. */
+	if (!u2d)
+		return 0;
+
+	clk_enable(u2d->clk);
+
+	if (cpu_is_pxa310()) {
+		pxa310_u2d_setup_otg_hc();
+		err = pxa310_start_otg_hc(host);
+	}
+
+	return err;
+}
+
+void pxa3xx_u2d_stop_hc(struct usb_bus *host)
+{
+	/* In case the PXA3xx ULPI isn't used, do nothing. */
+	if (!u2d)
+		return;
+
+	if (cpu_is_pxa310())
+		pxa310_stop_otg_hc();
+
+	clk_disable(u2d->clk);
+}
+
+static int pxa3xx_u2d_probe(struct platform_device *pdev)
+{
+	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *r;
+	int err;
+
+	u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL);
+	if (!u2d) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	u2d->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(u2d->clk)) {
+		dev_err(&pdev->dev, "failed to get u2d clock\n");
+		err = PTR_ERR(u2d->clk);
+		goto err_free_mem;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no IO memory resource defined\n");
+		err = -ENODEV;
+		goto err_put_clk;
+	}
+
+        r = request_mem_region(r->start, resource_size(r), pdev->name);
+        if (!r) {
+                dev_err(&pdev->dev, "failed to request memory resource\n");
+                err = -EBUSY;
+                goto err_put_clk;
+        }
+
+	u2d->mmio_base = ioremap(r->start, resource_size(r));
+	if (!u2d->mmio_base) {
+		dev_err(&pdev->dev, "ioremap() failed\n");
+		err = -ENODEV;
+		goto err_free_res;
+	}
+
+	if (pdata->init) {
+		err = pdata->init(&pdev->dev);
+		if (err)
+			goto err_free_io;
+	}
+
+	/* Only PXA310 U2D has OTG functionality */
+	if (cpu_is_pxa310()) {
+		err = pxa310_otg_init(pdata);
+		if (err)
+			goto err_free_plat;
+	}
+
+	platform_set_drvdata(pdev, &u2d);
+
+	return 0;
+
+err_free_plat:
+	if (pdata->exit)
+		pdata->exit(&pdev->dev);
+err_free_io:
+	iounmap(u2d->mmio_base);
+err_free_res:
+	release_mem_region(r->start, resource_size(r));
+err_put_clk:
+	clk_put(u2d->clk);
+err_free_mem:
+	kfree(u2d);
+	return err;
+}
+
+static int pxa3xx_u2d_remove(struct platform_device *pdev)
+{
+	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *r;
+
+	if (cpu_is_pxa310()) {
+		pxa310_stop_otg_hc();
+		pxa310_otg_exit();
+	}
+
+	if (pdata->exit)
+		pdata->exit(&pdev->dev);
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(u2d->mmio_base);
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, resource_size(r));
+
+	clk_put(u2d->clk);
+
+	kfree(u2d);
+
+	return 0;
+}
+
+static struct platform_driver pxa3xx_u2d_ulpi_driver = {
+        .driver		= {
+                .name   = "pxa3xx-u2d",
+		.owner	= THIS_MODULE,
+        },
+        .probe          = pxa3xx_u2d_probe,
+        .remove         = pxa3xx_u2d_remove,
+};
+
+static int pxa3xx_u2d_ulpi_init(void)
+{
+	return platform_driver_register(&pxa3xx_u2d_ulpi_driver);
+}
+module_init(pxa3xx_u2d_ulpi_init);
+
+static void __exit pxa3xx_u2d_ulpi_exit(void)
+{
+	platform_driver_unregister(&pxa3xx_u2d_ulpi_driver);
+}
+module_exit(pxa3xx_u2d_ulpi_exit);
+
+MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
+MODULE_AUTHOR("Igor Grinberg");
+MODULE_LICENSE("GPL v2");

arch/arm/mach-pxa/pxa3xx.c

@@ -98,23 +98,6 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info)
 	return CLK / 1000;
 }
 
-/*
- * Return the current static memory controller clock frequency
- * in units of 10kHz
- */
-unsigned int pxa3xx_get_memclk_frequency_10khz(void)
-{
-	unsigned long acsr;
-	unsigned int smcfs, clk = 0;
-
-	acsr = ACSR;
-
-	smcfs = (acsr >> 23) & 0x7;
-	clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK;
-
-	return (clk / 10000);
-}
-
 void pxa3xx_clear_reset_status(unsigned int mask)
 {
 	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
@@ -265,7 +248,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
 	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
-	INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
+	INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
 	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),

arch/arm/mach-pxa/pxa930.c

@@ -192,7 +192,7 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
 
 static int __init pxa930_init(void)
 {
-	if (cpu_is_pxa930() || cpu_is_pxa935()) {
+	if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
 	}

arch/arm/mach-pxa/stargate2.c

@@ -56,6 +56,8 @@
 #include "devices.h"
 #include "generic.h"
 
+#define STARGATE_NR_IRQS	(IRQ_BOARD_START + 8)
+
 /* Bluetooth */
 #define SG2_BT_RESET		81
 
@@ -1011,6 +1013,7 @@ MACHINE_START(STARGATE2, "Stargate 2")
 	.phys_io = 0x40000000,
 	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io = pxa_map_io,
+	.nr_irqs = STARGATE_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = stargate2_init,

arch/arm/mach-pxa/tavorevb.c

@@ -25,7 +25,7 @@
 
 #include <mach/pxa930.h>
 #include <mach/pxafb.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"

arch/arm/mach-pxa/tavorevb3.c

@@ -0,0 +1,136 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb3.c
+ *
+ *  Support for the Marvell EVB3 Development Platform.
+ *
+ *  Copyright:  (C) Copyright 2008-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/mfd/88pm860x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa930.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define TAVOREVB3_NR_IRQS	(IRQ_BOARD_START + 24)
+
+static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
+	/* UART */
+	GPIO53_UART1_TXD,
+	GPIO54_UART1_RXD,
+
+	/* PMIC */
+	PMIC_INT_GPIO83,
+};
+
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pm860x_touch_pdata evb3_touch = {
+	.gpadc_prebias	= 1,
+	.slot_cycle	= 1,
+	.tsi_prebias	= 6,
+	.pen_prebias	= 16,
+	.pen_prechg	= 2,
+	.res_x		= 300,
+};
+
+static struct pm860x_backlight_pdata evb3_backlight[] = {
+	{
+		.id	= PM8606_ID_BACKLIGHT,
+		.iset	= PM8606_WLED_CURRENT(24),
+		.flags	= PM8606_BACKLIGHT1,
+	},
+	{},
+};
+
+static struct pm860x_led_pdata evb3_led[] = {
+	{
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_BLUE,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_BLUE,
+	},
+};
+
+static struct pm860x_platform_data evb3_pm8607_info = {
+	.touch				= &evb3_touch,
+	.backlight			= &evb3_backlight[0],
+	.led				= &evb3_led[0],
+	.companion_addr			= 0x10,
+	.irq_mode			= 0,
+	.irq_base			= IRQ_BOARD_START,
+
+	.i2c_port			= GI2C_PORT,
+};
+
+static struct i2c_board_info evb3_i2c_info[] = {
+	{
+		.type		= "88PM860x",
+		.addr		= 0x34,
+		.platform_data	= &evb3_pm8607_info,
+		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+	},
+};
+
+static void __init evb3_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
+}
+#else
+static inline void evb3_init_i2c(void) {}
+#endif
+
+static void __init evb3_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
+
+	pxa_set_ffuart_info(NULL);
+
+	evb3_init_i2c();
+}
+
+MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.map_io         = pxa_map_io,
+	.nr_irqs	= TAVOREVB3_NR_IRQS,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = evb3_init,
+MACHINE_END

arch/arm/mach-pxa/tosa.c

@@ -956,6 +956,7 @@ MACHINE_START(TOSA, "SHARP Tosa")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup          = fixup_tosa,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= TOSA_NR_IRQS,
 	.init_irq       = pxa25x_init_irq,
 	.init_machine   = tosa_init,
 	.timer          = &pxa_timer,

arch/arm/mach-pxa/z2.c

@@ -37,7 +37,7 @@
 #include <mach/z2.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 
 #include <plat/i2c.h>

arch/arm/mach-pxa/zeus.c

@@ -904,6 +904,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	.io_pg_offst	= ((io_p2v(0x40000000) >> 18) & 0xfffc),
 	.boot_params	= 0xa0000100,
 	.map_io		= zeus_map_io,
+	.nr_irqs	= ZEUS_NR_IRQS,
 	.init_irq	= zeus_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zeus_init,

arch/arm/mach-pxa/zylonite.c

@@ -30,7 +30,7 @@
 #include <mach/zylonite.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
@@ -415,6 +415,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 	.boot_params	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zylonite_init,

arch/arm/mach-pxa/include/mach/pxa27x_keypad.h → arch/arm/plat-pxa/include/plat/pxa27x_keypad.h

@@ -25,6 +25,13 @@
  *
  * 4. matrix key and direct key will use the same debounce_interval by
  *    default, which should be sufficient in most cases
+ *
+ * pxa168 keypad platform specific parameter
+ *
+ * NOTE:
+ * clear_wakeup_event callback is a workaround required to clear the
+ * keypad interrupt. The keypad wake must be cleared in addition to
+ * reading the MI/DI bits in the KPC register.
  */
 struct pxa27x_keypad_platform_data {
 
@@ -52,6 +59,9 @@ struct pxa27x_keypad_platform_data {
 
 	/* key debounce interval */
 	unsigned int	debounce_interval;
+
+	/* clear wakeup event requirement for pxa168 */
+	void		(*clear_wakeup_event)(void);
 };
 
 extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);

drivers/input/keyboard/Kconfig

@@ -338,7 +338,7 @@ config KEYBOARD_OPENCORES
 
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
-	depends on PXA27x || PXA3xx
+	depends on PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for PXA27x/PXA3xx keypad controller.
 

drivers/input/keyboard/pxa27x_keypad.c

@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 /*
  * Keypad Controller registers
  */
@@ -330,11 +330,21 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
 	keypad->direct_key_state = new_state;
 }
 
+static void clear_wakeup_event(struct pxa27x_keypad *keypad)
+{
+	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+	if (pdata->clear_wakeup_event)
+		(pdata->clear_wakeup_event)();
+}
+
 static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
 {
 	struct pxa27x_keypad *keypad = dev_id;
 	unsigned long kpc = keypad_readl(KPC);
 
+	clear_wakeup_event(keypad);
+
 	if (kpc & KPC_DI)
 		pxa27x_keypad_scan_direct(keypad);
 

drivers/usb/host/ohci-pxa27x.c

@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <mach/ohci.h>
+#include <mach/pxa3xx-u2d.h>
 
 /*
  * UHC: USB Host Controller (OHCI-like) register definitions
@@ -235,6 +236,9 @@ static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev)
 	if (retval < 0)
 		return retval;
 
+	if (cpu_is_pxa3xx())
+		pxa3xx_u2d_start_hc(&ohci_to_hcd(&ohci->ohci)->self);
+
 	uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
 	__raw_writel(uhchr, ohci->mmio_base + UHCHR);
 	__raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE);
@@ -251,6 +255,9 @@ static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev)
 
 	inf = dev->platform_data;
 
+	if (cpu_is_pxa3xx())
+		pxa3xx_u2d_stop_hc(&ohci_to_hcd(&ohci->ohci)->self);
+
 	if (inf->exit)
 		inf->exit(dev);
 

drivers/video/pxa168fb.c

@@ -784,12 +784,53 @@ failed:
 	return ret;
 }
 
+static int __devexit pxa168fb_remove(struct platform_device *pdev)
+{
+	struct pxa168fb_info *fbi = platform_get_drvdata(pdev);
+	struct fb_info *info;
+	int irq;
+	unsigned int data;
+
+	if (!fbi)
+		return 0;
+
+	/* disable DMA transfer */
+	data = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
+	data &= ~CFG_GRA_ENA_MASK;
+	writel(data, fbi->reg_base + LCD_SPU_DMA_CTRL0);
+
+	info = fbi->info;
+
+	unregister_framebuffer(info);
+
+	writel(GRA_FRAME_IRQ0_ENA(0x0), fbi->reg_base + SPU_IRQ_ENA);
+
+	if (info->cmap.len)
+		fb_dealloc_cmap(&info->cmap);
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, fbi);
+
+	dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
+				info->screen_base, info->fix.smem_start);
+
+	iounmap(fbi->reg_base);
+
+	clk_disable(fbi->clk);
+	clk_put(fbi->clk);
+
+	framebuffer_release(info);
+
+	return 0;
+}
+
 static struct platform_driver pxa168fb_driver = {
 	.driver		= {
 		.name	= "pxa168-fb",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= pxa168fb_probe,
+	.remove		= __devexit_p(pxa168fb_remove),
 };
 
 static int __init pxa168fb_init(void)
@@ -798,6 +839,12 @@ static int __init pxa168fb_init(void)
 }
 module_init(pxa168fb_init);
 
+static void __exit pxa168fb_exit(void)
+{
+	platform_driver_unregister(&pxa168fb_driver);
+}
+module_exit(pxa168fb_exit);
+
 MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
 	      "Green Wan <gwan@marvell.com>");
 MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");