mv643xx_eth: use symbolic MII register addresses and values

Instead of hardcoding MII register addresses and values, use the
symbolic constants defined in linux/mii.h.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

drivers/net/mv643xx_eth.c

@@ -1831,14 +1831,14 @@ static void phy_reset(struct mv643xx_eth_private *mp)
 {
 	unsigned int data;
 
-	smi_reg_read(mp, mp->phy_addr, 0, &data);
-	data |= 0x8000;
-	smi_reg_write(mp, mp->phy_addr, 0, data);
+	smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+	data |= BMCR_RESET;
+	smi_reg_write(mp, mp->phy_addr, MII_BMCR, data);
 
 	do {
 		udelay(1);
-		smi_reg_read(mp, mp->phy_addr, 0, &data);
-	} while (data & 0x8000);
+		smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+	} while (data & BMCR_RESET);
 }
 
 static void port_start(struct mv643xx_eth_private *mp)
@@ -2385,14 +2385,14 @@ static int phy_detect(struct mv643xx_eth_private *mp)
 	unsigned int data;
 	unsigned int data2;
 
-	smi_reg_read(mp, mp->phy_addr, 0, &data);
-	smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000);
+	smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+	smi_reg_write(mp, mp->phy_addr, MII_BMCR, data ^ BMCR_ANENABLE);
 
-	smi_reg_read(mp, mp->phy_addr, 0, &data2);
-	if (((data ^ data2) & 0x1000) == 0)
+	smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data2);
+	if (((data ^ data2) & BMCR_ANENABLE) == 0)
 		return -ENODEV;
 
-	smi_reg_write(mp, mp->phy_addr, 0, data);
+	smi_reg_write(mp, mp->phy_addr, MII_BMCR, data);
 
 	return 0;
 }