[PATCH] m68knommu: add 5208 ColdFire UART support to ColdFire serial driver

Add support for the Freescale 5208 processor UART's to the common
ColdFire serial port code.

Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/serial/mcfserial.c

@@ -57,7 +57,8 @@ struct timer_list mcfrs_timer_struct;
  *	keep going.  Perhaps one day the cflag settings for the
  *	console can be used instead.
  */
-#if defined(CONFIG_ARNEWSH) || defined(CONFIG_MOTOROLA) || defined(CONFIG_senTec) || defined(CONFIG_SNEHA)
+#if defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
+    defined(CONFIG_senTec) || defined(CONFIG_SNEHA)
 #define	CONSOLE_BAUD_RATE	19200
 #define	DEFAULT_CBAUD		B19200
 #endif
@@ -67,7 +68,7 @@ struct timer_list mcfrs_timer_struct;
 #define	DEFAULT_CBAUD		B38400
 #endif
 
-#if defined(CONFIG_MOD5272)
+#if defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB)
 #define CONSOLE_BAUD_RATE 	115200
 #define DEFAULT_CBAUD		B115200
 #endif
@@ -95,7 +96,8 @@ static struct tty_driver *mcfrs_serial_driver;
 #undef SERIAL_DEBUG_OPEN
 #undef SERIAL_DEBUG_FLOW
 
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M520x)
 #define	IRQBASE	(MCFINT_VECBASE+MCFINT_UART0)
 #else
 #define	IRQBASE	73
@@ -1528,6 +1530,35 @@ static void mcfrs_irqinit(struct mcf_serial *info)
 	imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
 		MCFINTC_IMRL);
 	*imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
+#elif defined(CONFIG_M520x)
+	volatile unsigned char *icrp, *uartp;
+	volatile unsigned long *imrp;
+
+	uartp = info->addr;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
+		MCFINTC_ICR0 + MCFINT_UART0 + info->line);
+	*icrp = 0x03;
+
+	imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
+		MCFINTC_IMRL);
+	*imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
+	if (info->line < 2) {
+		unsigned short *uart_par;
+		uart_par = (unsigned short *)(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+		if (info->line == 0)
+			*uart_par |=  MCF_GPIO_PAR_UART_PAR_UTXD0
+				  | MCF_GPIO_PAR_UART_PAR_URXD0;
+		else if (info->line == 1)
+			*uart_par |=  MCF_GPIO_PAR_UART_PAR_UTXD1
+				  | MCF_GPIO_PAR_UART_PAR_URXD1;
+		} else if (info->line == 2) {
+			unsigned char *feci2c_par;
+			feci2c_par = (unsigned char *)(MCF_IPSBAR +  MCF_GPIO_PAR_FECI2C);
+			*feci2c_par &= ~0x0F;
+			*feci2c_par |=  MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2
+				    | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
+		}
 #else
 	volatile unsigned char	*icrp, *uartp;