|
@@ -2,6 +2,8 @@
|
|
|
* ADS7846 based touchscreen and sensor driver
|
|
|
*
|
|
|
* Copyright (c) 2005 David Brownell
|
|
|
+ * Copyright (c) 2006 Nokia Corporation
|
|
|
+ * Various changes: Imre Deak <imre.deak@nokia.com>
|
|
|
*
|
|
|
* Using code from:
|
|
|
* - corgi_ts.c
|
|
@@ -34,17 +36,25 @@
|
|
|
|
|
|
|
|
|
/*
|
|
|
- * This code has been lightly tested on an ads7846.
|
|
|
+ * This code has been tested on an ads7846 / N770 device.
|
|
|
* Support for ads7843 and ads7845 has only been stubbed in.
|
|
|
*
|
|
|
- * Not yet done: investigate the values reported. Are x/y/pressure
|
|
|
- * event values sane enough for X11? How accurate are the temperature
|
|
|
- * and voltage readings? (System-specific calibration should support
|
|
|
+ * Not yet done: How accurate are the temperature and voltage
|
|
|
+ * readings? (System-specific calibration should support
|
|
|
* accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.)
|
|
|
*
|
|
|
+ * IRQ handling needs a workaround because of a shortcoming in handling
|
|
|
+ * edge triggered IRQs on some platforms like the OMAP1/2. These
|
|
|
+ * platforms don't handle the ARM lazy IRQ disabling properly, thus we
|
|
|
+ * have to maintain our own SW IRQ disabled status. This should be
|
|
|
+ * removed as soon as the affected platform's IRQ handling is fixed.
|
|
|
+ *
|
|
|
* app note sbaa036 talks in more detail about accurate sampling...
|
|
|
* that ought to help in situations like LCDs inducing noise (which
|
|
|
* can also be helped by using synch signals) and more generally.
|
|
|
+ * This driver tries to utilize the measures described in the app
|
|
|
+ * note. The strength of filtering can be set in the board-* specific
|
|
|
+ * files.
|
|
|
*/
|
|
|
|
|
|
#define TS_POLL_PERIOD msecs_to_jiffies(10)
|
|
@@ -91,6 +101,7 @@ struct ads7846 {
|
|
|
unsigned pending:1; /* P: lock */
|
|
|
// FIXME remove "irq_disabled"
|
|
|
unsigned irq_disabled:1; /* P: lock */
|
|
|
+ unsigned disabled:1;
|
|
|
};
|
|
|
|
|
|
/* leave chip selected when we're done, for quicker re-select? */
|
|
@@ -161,6 +172,9 @@ struct ser_req {
|
|
|
struct spi_transfer xfer[6];
|
|
|
};
|
|
|
|
|
|
+static void ads7846_enable(struct ads7846 *ts);
|
|
|
+static void ads7846_disable(struct ads7846 *ts);
|
|
|
+
|
|
|
static int ads7846_read12_ser(struct device *dev, unsigned command)
|
|
|
{
|
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
@@ -257,6 +271,37 @@ static ssize_t ads7846_pen_down_show(struct device *dev,
|
|
|
|
|
|
static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
|
|
|
|
|
|
+static ssize_t ads7846_disable_show(struct device *dev,
|
|
|
+ struct device_attribute *attr, char *buf)
|
|
|
+{
|
|
|
+ struct ads7846 *ts = dev_get_drvdata(dev);
|
|
|
+
|
|
|
+ return sprintf(buf, "%u\n", ts->disabled);
|
|
|
+}
|
|
|
+
|
|
|
+static ssize_t ads7846_disable_store(struct device *dev,
|
|
|
+ struct device_attribute *attr,
|
|
|
+ const char *buf, size_t count)
|
|
|
+{
|
|
|
+ struct ads7846 *ts = dev_get_drvdata(dev);
|
|
|
+ char *endp;
|
|
|
+ int i;
|
|
|
+
|
|
|
+ i = simple_strtoul(buf, &endp, 10);
|
|
|
+ spin_lock_irq(&ts->lock);
|
|
|
+
|
|
|
+ if (i)
|
|
|
+ ads7846_disable(ts);
|
|
|
+ else
|
|
|
+ ads7846_enable(ts);
|
|
|
+
|
|
|
+ spin_unlock_irq(&ts->lock);
|
|
|
+
|
|
|
+ return count;
|
|
|
+}
|
|
|
+
|
|
|
+static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
|
|
|
+
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
|
|
/*
|
|
@@ -396,12 +441,9 @@ static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
|
|
|
{
|
|
|
struct ads7846 *ts = handle;
|
|
|
unsigned long flags;
|
|
|
- int r = IRQ_HANDLED;
|
|
|
|
|
|
spin_lock_irqsave(&ts->lock, flags);
|
|
|
- if (ts->irq_disabled)
|
|
|
- r = IRQ_HANDLED;
|
|
|
- else {
|
|
|
+ if (likely(!ts->irq_disabled && !ts->disabled)) {
|
|
|
if (!ts->irq_disabled) {
|
|
|
/* REVISIT irq logic for many ARM chips has cloned a
|
|
|
* bug wherein disabling an irq in its handler won't
|
|
@@ -419,20 +461,17 @@ static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
|
|
|
}
|
|
|
}
|
|
|
spin_unlock_irqrestore(&ts->lock, flags);
|
|
|
- return r;
|
|
|
+
|
|
|
+ return IRQ_HANDLED;
|
|
|
}
|
|
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
|
|
-static int
|
|
|
-ads7846_suspend(struct spi_device *spi, pm_message_t message)
|
|
|
+/* Must be called with ts->lock held */
|
|
|
+static void ads7846_disable(struct ads7846 *ts)
|
|
|
{
|
|
|
- struct ads7846 *ts = dev_get_drvdata(&spi->dev);
|
|
|
- unsigned long flags;
|
|
|
-
|
|
|
- spin_lock_irqsave(&ts->lock, flags);
|
|
|
-
|
|
|
- spi->dev.power.power_state = message;
|
|
|
+ if (ts->disabled)
|
|
|
+ return;
|
|
|
|
|
|
/* are we waiting for IRQ, or polling? */
|
|
|
if (!ts->pendown) {
|
|
@@ -448,9 +487,9 @@ ads7846_suspend(struct spi_device *spi, pm_message_t message)
|
|
|
mod_timer(&ts->timer, jiffies);
|
|
|
|
|
|
while (ts->pendown || ts->pending) {
|
|
|
- spin_unlock_irqrestore(&ts->lock, flags);
|
|
|
+ spin_unlock_irq(&ts->lock);
|
|
|
msleep(1);
|
|
|
- spin_lock_irqsave(&ts->lock, flags);
|
|
|
+ spin_lock_irq(&ts->lock);
|
|
|
}
|
|
|
}
|
|
|
|
|
@@ -458,17 +497,46 @@ ads7846_suspend(struct spi_device *spi, pm_message_t message)
|
|
|
* leave it that way after every request
|
|
|
*/
|
|
|
|
|
|
- spin_unlock_irqrestore(&ts->lock, flags);
|
|
|
+ ts->disabled = 1;
|
|
|
+}
|
|
|
+
|
|
|
+/* Must be called with ts->lock held */
|
|
|
+static void ads7846_enable(struct ads7846 *ts)
|
|
|
+{
|
|
|
+ if (!ts->disabled)
|
|
|
+ return;
|
|
|
+
|
|
|
+ ts->disabled = 0;
|
|
|
+ ts->irq_disabled = 0;
|
|
|
+ enable_irq(ts->spi->irq);
|
|
|
+}
|
|
|
+
|
|
|
+static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
|
|
|
+{
|
|
|
+ struct ads7846 *ts = dev_get_drvdata(&spi->dev);
|
|
|
+
|
|
|
+ spin_lock_irq(&ts->lock);
|
|
|
+
|
|
|
+ spi->dev.power.power_state = message;
|
|
|
+ ads7846_disable(ts);
|
|
|
+
|
|
|
+ spin_unlock_irq(&ts->lock);
|
|
|
+
|
|
|
return 0;
|
|
|
+
|
|
|
}
|
|
|
|
|
|
static int ads7846_resume(struct spi_device *spi)
|
|
|
{
|
|
|
struct ads7846 *ts = dev_get_drvdata(&spi->dev);
|
|
|
|
|
|
- ts->irq_disabled = 0;
|
|
|
- enable_irq(ts->spi->irq);
|
|
|
+ spin_lock_irq(&ts->lock);
|
|
|
+
|
|
|
spi->dev.power.power_state = PMSG_ON;
|
|
|
+ ads7846_enable(ts);
|
|
|
+
|
|
|
+ spin_unlock_irq(&ts->lock);
|
|
|
+
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
@@ -521,6 +589,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
|
|
|
ts->timer.data = (unsigned long) ts;
|
|
|
ts->timer.function = ads7846_timer;
|
|
|
|
|
|
+ spin_lock_init(&ts->lock);
|
|
|
+
|
|
|
ts->model = pdata->model ? : 7846;
|
|
|
ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
|
|
|
ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
|
|
@@ -671,13 +741,25 @@ static int __devinit ads7846_probe(struct spi_device *spi)
|
|
|
|
|
|
device_create_file(&spi->dev, &dev_attr_pen_down);
|
|
|
|
|
|
+ device_create_file(&spi->dev, &dev_attr_disable);
|
|
|
+
|
|
|
err = input_register_device(input_dev);
|
|
|
if (err)
|
|
|
- goto err_free_irq;
|
|
|
+ goto err_remove_attr;
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
- err_free_irq:
|
|
|
+ err_remove_attr:
|
|
|
+ device_remove_file(&spi->dev, &dev_attr_disable);
|
|
|
+ device_remove_file(&spi->dev, &dev_attr_pen_down);
|
|
|
+ if (ts->model == 7846) {
|
|
|
+ device_remove_file(&spi->dev, &dev_attr_temp1);
|
|
|
+ device_remove_file(&spi->dev, &dev_attr_temp0);
|
|
|
+ }
|
|
|
+ if (ts->model != 7845)
|
|
|
+ device_remove_file(&spi->dev, &dev_attr_vbatt);
|
|
|
+ device_remove_file(&spi->dev, &dev_attr_vaux);
|
|
|
+
|
|
|
free_irq(spi->irq, ts);
|
|
|
err_free_mem:
|
|
|
input_free_device(input_dev);
|
|
@@ -689,22 +771,24 @@ static int __devexit ads7846_remove(struct spi_device *spi)
|
|
|
{
|
|
|
struct ads7846 *ts = dev_get_drvdata(&spi->dev);
|
|
|
|
|
|
+ input_unregister_device(ts->input);
|
|
|
+
|
|
|
ads7846_suspend(spi, PMSG_SUSPEND);
|
|
|
- free_irq(ts->spi->irq, ts);
|
|
|
- if (ts->irq_disabled)
|
|
|
- enable_irq(ts->spi->irq);
|
|
|
|
|
|
+ device_remove_file(&spi->dev, &dev_attr_disable);
|
|
|
device_remove_file(&spi->dev, &dev_attr_pen_down);
|
|
|
-
|
|
|
if (ts->model == 7846) {
|
|
|
- device_remove_file(&spi->dev, &dev_attr_temp0);
|
|
|
device_remove_file(&spi->dev, &dev_attr_temp1);
|
|
|
+ device_remove_file(&spi->dev, &dev_attr_temp0);
|
|
|
}
|
|
|
if (ts->model != 7845)
|
|
|
device_remove_file(&spi->dev, &dev_attr_vbatt);
|
|
|
device_remove_file(&spi->dev, &dev_attr_vaux);
|
|
|
|
|
|
- input_unregister_device(ts->input);
|
|
|
+ free_irq(ts->spi->irq, ts);
|
|
|
+ if (ts->irq_disabled)
|
|
|
+ enable_irq(ts->spi->irq);
|
|
|
+
|
|
|
kfree(ts);
|
|
|
|
|
|
dev_dbg(&spi->dev, "unregistered touchscreen\n");
|