* use 'unsigned long' as address supplied to au_write[bwl]()

* remove two already unused and commented structures
* added an ULL suffix to several address constants that use bits 35-32

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

include/asm-mips/mach-au1x00/au1000.h

@@ -60,34 +60,34 @@ void static inline au_sync_delay(int ms)
 	mdelay(ms);
 }
 
-void static inline au_writeb(u8 val, int reg)
+void static inline au_writeb(u8 val, unsigned long reg)
 {
 	*(volatile u8 *)(reg) = val;
 }
 
-void static inline au_writew(u16 val, int reg)
+void static inline au_writew(u16 val, unsigned long reg)
 {
 	*(volatile u16 *)(reg) = val;
 }
 
-void static inline au_writel(u32 val, int reg)
+void static inline au_writel(u32 val, unsigned long reg)
 {
 	*(volatile u32 *)(reg) = val;
 }
 
-static inline u8 au_readb(unsigned long port)
+static inline u8 au_readb(unsigned long reg)
 {
-	return (*(volatile u8 *)port);
+	return (*(volatile u8 *)reg);
 }
 
-static inline u16 au_readw(unsigned long port)
+static inline u16 au_readw(unsigned long reg)
 {
-	return (*(volatile u16 *)port);
+	return (*(volatile u16 *)reg);
 }
 
-static inline u32 au_readl(unsigned long port)
+static inline u32 au_readl(unsigned long reg)
 {
-	return (*(volatile u32 *)port);
+	return (*(volatile u32 *)reg);
 }
 
 /* These next three functions should be a generic part of the MIPS
@@ -181,26 +181,6 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define MEM_SDSLEEP		(0x0030)
 #define MEM_SDSMCKE		(0x0034)
 
-#ifndef ASSEMBLER
-/*typedef volatile struct
-{
-	uint32 sdmode0;
-	uint32 sdmode1;
-	uint32 sdmode2;
-	uint32 sdaddr0;
-	uint32 sdaddr1;
-	uint32 sdaddr2;
-	uint32 sdrefcfg;
-	uint32 sdautoref;
-	uint32 sdwrmd0;
-	uint32 sdwrmd1;
-	uint32 sdwrmd2;
-	uint32 sdsleep;
-	uint32 sdsmcke;
-
-} AU1X00_SDRAM;*/
-#endif
-
 /*
  * MEM_SDMODE register content definitions
  */
@@ -286,49 +266,6 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define MEM_SDSREF		(0x08D0)
 #define MEM_SDSLEEP		MEM_SDSREF
 
-#ifndef ASSEMBLER
-/*typedef volatile struct
-{
-	uint32 sdmode0;
-	uint32 reserved0;
-	uint32 sdmode1;
-	uint32 reserved1;
-	uint32 sdmode2;
-	uint32 reserved2[3];
-	uint32 sdaddr0;
-	uint32 reserved3;
-	uint32 sdaddr1;
-	uint32 reserved4;
-	uint32 sdaddr2;
-	uint32 reserved5[3];
-	uint32 sdconfiga;
-	uint32 reserved6;
-	uint32 sdconfigb;
-	uint32 reserved7;
-	uint32 sdstat;
-	uint32 reserved8;
-	uint32 sderraddr;
-	uint32 reserved9;
-	uint32 sdstride0;
-	uint32 reserved10;
-	uint32 sdstride1;
-	uint32 reserved11;
-	uint32 sdstride2;
-	uint32 reserved12[3];
-	uint32 sdwrmd0;
-	uint32 reserved13;
-	uint32 sdwrmd1;
-	uint32 reserved14;
-	uint32 sdwrmd2;
-	uint32 reserved15[11];
-	uint32 sdprecmd;
-	uint32 reserved16;
-	uint32 sdautoref;
-	uint32 reserved17;
-	uint32 sdsref;
-
-} AU1550_SDRAM;*/
-#endif
 #endif
 
 /*
@@ -365,9 +302,9 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define	SSI0_PHYS_ADDR		0x11600000
 #define	SSI1_PHYS_ADDR		0x11680000
 #define	SYS_PHYS_ADDR		0x11900000
-#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000ULL
 #endif
 
 /********************************************************************/
@@ -399,13 +336,13 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define	UART3_PHYS_ADDR		0x11400000
 #define GPIO2_PHYS_ADDR		0x11700000
 #define	SYS_PHYS_ADDR		0x11900000
-#define PCI_MEM_PHYS_ADDR     0x400000000
-#define PCI_IO_PHYS_ADDR      0x500000000
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000
-#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
+#define PCI_MEM_PHYS_ADDR     0x400000000ULL
+#define PCI_IO_PHYS_ADDR      0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000ULL
 #endif
 
 /********************************************************************/
@@ -442,9 +379,9 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define GPIO2_PHYS_ADDR		0x11700000
 #define	SYS_PHYS_ADDR		0x11900000
 #define LCD_PHYS_ADDR		0x15000000
-#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000ULL
 #endif
 
 /***********************************************************************/
@@ -473,13 +410,13 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define PSC1_PHYS_ADDR	 	0x11B00000
 #define PSC2_PHYS_ADDR	 	0x10A00000
 #define PSC3_PHYS_ADDR	 	0x10B00000
-#define PCI_MEM_PHYS_ADDR     0x400000000
-#define PCI_IO_PHYS_ADDR      0x500000000
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000
-#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
+#define PCI_MEM_PHYS_ADDR     0x400000000ULL
+#define PCI_IO_PHYS_ADDR      0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000ULL
 #endif
 
 /***********************************************************************/
@@ -500,15 +437,15 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
 #define	DDMA_PHYS_ADDR		0x14002000
 #define PSC0_PHYS_ADDR	 	0x11A00000
 #define PSC1_PHYS_ADDR	 	0x11B00000
-#define PCMCIA_IO_PHYS_ADDR   0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR  0xF80000000
 #define SD0_PHYS_ADDR		0x10600000
 #define SD1_PHYS_ADDR		0x10680000
 #define LCD_PHYS_ADDR		0x15000000
 #define SWCNT_PHYS_ADDR		0x1110010C
 #define MAEFE_PHYS_ADDR		0x14012000
 #define MAEBE_PHYS_ADDR		0x14010000
+#define PCMCIA_IO_PHYS_ADDR   0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR  0xF80000000ULL
 #endif