ath9k_hw: fix and clean up PHY activation delay

The delay calculation is the same for all chips, however some parts of the
code missed the extra delay factor for half/quarter.
Clean up the code and move the delay calculation to a common place.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar5008_phy.c

@@ -618,19 +618,10 @@ static void ar5008_hw_init_bb(struct ath_hw *ah,
 	u32 synthDelay;
 
 	synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
-	if (IS_CHAN_B(chan))
-		synthDelay = (4 * synthDelay) / 22;
-	else
-		synthDelay /= 10;
-
-	if (IS_CHAN_HALF_RATE(chan))
-		synthDelay *= 2;
-	else if (IS_CHAN_QUARTER_RATE(chan))
-		synthDelay *= 4;
 
 	REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
 
-	udelay(synthDelay + BASE_ACTIVATE_DELAY);
+	ath9k_hw_synth_delay(ah, chan, synthDelay);
 }
 
 static void ar5008_hw_init_chain_masks(struct ath_hw *ah)
@@ -948,12 +939,8 @@ static bool ar5008_hw_rfbus_req(struct ath_hw *ah)
 static void ar5008_hw_rfbus_done(struct ath_hw *ah)
 {
 	u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
-	if (IS_CHAN_B(ah->curchan))
-		synthDelay = (4 * synthDelay) / 22;
-	else
-		synthDelay /= 10;
 
-	udelay(synthDelay + BASE_ACTIVATE_DELAY);
+	ath9k_hw_synth_delay(ah, ah->curchan, synthDelay);
 
 	REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
 }

drivers/net/wireless/ath/ath9k/ar9003_phy.c

@@ -526,22 +526,10 @@ static void ar9003_hw_init_bb(struct ath_hw *ah,
 	 * Value is in 100ns increments.
 	 */
 	synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
-	if (IS_CHAN_B(chan))
-		synthDelay = (4 * synthDelay) / 22;
-	else
-		synthDelay /= 10;
 
 	/* Activate the PHY (includes baseband activate + synthesizer on) */
 	REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
-
-	/*
-	 * There is an issue if the AP starts the calibration before
-	 * the base band timeout completes.  This could result in the
-	 * rx_clear false triggering.  As a workaround we add delay an
-	 * extra BASE_ACTIVATE_DELAY usecs to ensure this condition
-	 * does not happen.
-	 */
-	udelay(synthDelay + BASE_ACTIVATE_DELAY);
+	ath9k_hw_synth_delay(ah, chan, synthDelay);
 }
 
 static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
@@ -801,12 +789,8 @@ static bool ar9003_hw_rfbus_req(struct ath_hw *ah)
 static void ar9003_hw_rfbus_done(struct ath_hw *ah)
 {
 	u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
-	if (IS_CHAN_B(ah->curchan))
-		synthDelay = (4 * synthDelay) / 22;
-	else
-		synthDelay /= 10;
 
-	udelay(synthDelay + BASE_ACTIVATE_DELAY);
+	ath9k_hw_synth_delay(ah, ah->curchan, synthDelay);
 
 	REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
 }

drivers/net/wireless/ath/ath9k/hw.c

@@ -191,6 +191,22 @@ bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
 }
 EXPORT_SYMBOL(ath9k_hw_wait);
 
+void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan,
+			  int hw_delay)
+{
+	if (IS_CHAN_B(chan))
+		hw_delay = (4 * hw_delay) / 22;
+	else
+		hw_delay /= 10;
+
+	if (IS_CHAN_HALF_RATE(chan))
+		hw_delay *= 2;
+	else if (IS_CHAN_QUARTER_RATE(chan))
+		hw_delay *= 4;
+
+	udelay(hw_delay + BASE_ACTIVATE_DELAY);
+}
+
 void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array,
 			  int column, unsigned int *writecnt)
 {

drivers/net/wireless/ath/ath9k/hw.h

@@ -923,6 +923,8 @@ void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val);
 void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna);
 
 /* General Operation */
+void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan,
+			  int hw_delay);
 bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
 void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array,
 			  int column, unsigned int *writecnt);