Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a set of nine fixes (and one author update).

  The libsas one should fix discovery in eSATA devices, the WRITE_SAME
  one is the largest, but it should fix a lot of problems we've been
  getting with the emulated RAID devices (they've been effectively lying
  about support and then firmware has been choking on the commands).

  The rest are various crash, hang or warn driver fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] bfa: Fix crash when symb name set for offline vport
  [SCSI] enclosure: fix WARN_ON in dual path device removing
  [SCSI] pm80xx: Tasklets synchronization fix.
  [SCSI] pm80xx: Resetting the phy state.
  [SCSI] pm80xx: Fix for direct attached device.
  [SCSI] pm80xx: Module author addition
  [SCSI] hpsa: return 0 from driver probe function on success, not 1
  [SCSI] hpsa: do not discard scsi status on aborted commands
  [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers
  [SCSI] libsas: fix usage of ata_tf_to_fis

drivers/ata/libata-scsi.c

@@ -3625,6 +3625,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
 		shost->max_lun = 1;
 		shost->max_channel = 1;
 		shost->max_cmd_len = 16;
+		shost->no_write_same = 1;
 
 		/* Schedule policy is determined by ->qc_defer()
 		 * callback and it needs to see every deferred qc.

drivers/firewire/sbp2.c

@@ -1623,6 +1623,7 @@ static struct scsi_host_template scsi_driver_template = {
 	.cmd_per_lun		= 1,
 	.can_queue		= 1,
 	.sdev_attrs		= sbp2_scsi_sysfs_attrs,
+	.no_write_same		= 1,
 };
 
 MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");

drivers/misc/enclosure.c

@@ -198,6 +198,13 @@ static void enclosure_remove_links(struct enclosure_component *cdev)
 {
 	char name[ENCLOSURE_NAME_SIZE];
 
+	/*
+	 * In odd circumstances, like multipath devices, something else may
+	 * already have removed the links, so check for this condition first.
+	 */
+	if (!cdev->dev->kobj.sd)
+		return;
+
 	enclosure_link_name(cdev, name);
 	sysfs_remove_link(&cdev->dev->kobj, name);
 	sysfs_remove_link(&cdev->cdev.kobj, "device");

drivers/scsi/3w-9xxx.c

@@ -2025,7 +2025,8 @@ static struct scsi_host_template driver_template = {
 	.cmd_per_lun		= TW_MAX_CMDS_PER_LUN,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.shost_attrs		= twa_host_attrs,
-	.emulated		= 1
+	.emulated		= 1,
+	.no_write_same		= 1,
 };
 
 /* This function will probe and initialize a card */

drivers/scsi/3w-sas.c

@@ -1600,7 +1600,8 @@ static struct scsi_host_template driver_template = {
 	.cmd_per_lun		= TW_MAX_CMDS_PER_LUN,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.shost_attrs		= twl_host_attrs,
-	.emulated		= 1
+	.emulated		= 1,
+	.no_write_same		= 1,
 };
 
 /* This function will probe and initialize a card */

drivers/scsi/3w-xxxx.c

@@ -2279,7 +2279,8 @@ static struct scsi_host_template driver_template = {
 	.cmd_per_lun		= TW_MAX_CMDS_PER_LUN,	
 	.use_clustering		= ENABLE_CLUSTERING,
 	.shost_attrs		= tw_host_attrs,
-	.emulated		= 1
+	.emulated		= 1,
+	.no_write_same		= 1,
 };
 
 /* This function will probe and initialize a card */

drivers/scsi/aacraid/linit.c

@@ -1081,6 +1081,7 @@ static struct scsi_host_template aac_driver_template = {
 #endif
 	.use_clustering			= ENABLE_CLUSTERING,
 	.emulated			= 1,
+	.no_write_same			= 1,
 };
 
 static void __aac_shutdown(struct aac_dev * aac)

drivers/scsi/arcmsr/arcmsr_hba.c

@@ -137,6 +137,7 @@ static struct scsi_host_template arcmsr_scsi_host_template = {
 	.cmd_per_lun		= ARCMSR_MAX_CMD_PERLUN,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.shost_attrs		= arcmsr_host_attrs,
+	.no_write_same		= 1,
 };
 static struct pci_device_id arcmsr_device_id_table[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)},

drivers/scsi/bfa/bfa_fcs.h

@@ -296,6 +296,7 @@ wwn_t bfa_fcs_lport_get_rport(struct bfa_fcs_lport_s *port, wwn_t wwn,
 struct bfa_fcs_lport_s *bfa_fcs_lookup_port(struct bfa_fcs_s *fcs,
 					    u16 vf_id, wwn_t lpwwn);
 
+void bfa_fcs_lport_set_symname(struct bfa_fcs_lport_s *port, char *symname);
 void bfa_fcs_lport_get_info(struct bfa_fcs_lport_s *port,
 			    struct bfa_lport_info_s *port_info);
 void bfa_fcs_lport_get_attr(struct bfa_fcs_lport_s *port,

drivers/scsi/bfa/bfa_fcs_lport.c

@@ -1097,6 +1097,17 @@ bfa_fcs_lport_init(struct bfa_fcs_lport_s *lport,
 	bfa_sm_send_event(lport, BFA_FCS_PORT_SM_CREATE);
 }
 
+void
+bfa_fcs_lport_set_symname(struct bfa_fcs_lport_s *port,
+				char *symname)
+{
+	strcpy(port->port_cfg.sym_name.symname, symname);
+
+	if (bfa_sm_cmp_state(port, bfa_fcs_lport_sm_online))
+		bfa_fcs_lport_ns_util_send_rspn_id(
+			BFA_FCS_GET_NS_FROM_PORT(port), NULL);
+}
+
 /*
  *  fcs_lport_api
  */
@@ -5140,9 +5151,6 @@ bfa_fcs_lport_ns_util_send_rspn_id(void *cbarg, struct bfa_fcxp_s *fcxp_alloced)
 	u8 *psymbl = &symbl[0];
 	int len;
 
-	if (!bfa_sm_cmp_state(port, bfa_fcs_lport_sm_online))
-		return;
-
 	/* Avoid sending RSPN in the following states. */
 	if (bfa_sm_cmp_state(ns, bfa_fcs_lport_ns_sm_offline) ||
 	    bfa_sm_cmp_state(ns, bfa_fcs_lport_ns_sm_plogi_sending) ||

drivers/scsi/bfa/bfad_attr.c

@@ -593,11 +593,8 @@ bfad_im_vport_set_symbolic_name(struct fc_vport *fc_vport)
 		return;
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
-	if (strlen(sym_name) > 0) {
-		strcpy(fcs_vport->lport.port_cfg.sym_name.symname, sym_name);
-		bfa_fcs_lport_ns_util_send_rspn_id(
-			BFA_FCS_GET_NS_FROM_PORT((&fcs_vport->lport)), NULL);
-	}
+	if (strlen(sym_name) > 0)
+		bfa_fcs_lport_set_symname(&fcs_vport->lport, sym_name);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 }
 

drivers/scsi/gdth.c

@@ -4684,6 +4684,7 @@ static struct scsi_host_template gdth_template = {
         .cmd_per_lun            = GDTH_MAXC_P_L,
         .unchecked_isa_dma      = 1,
         .use_clustering         = ENABLE_CLUSTERING,
+	.no_write_same		= 1,
 };
 
 #ifdef CONFIG_ISA

drivers/scsi/hosts.c

@@ -395,6 +395,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)
 	shost->use_clustering = sht->use_clustering;
 	shost->ordered_tag = sht->ordered_tag;
 	shost->eh_deadline = shost_eh_deadline * HZ;
+	shost->no_write_same = sht->no_write_same;
 
 	if (sht->supported_mode == MODE_UNKNOWN)
 		/* means we didn't set it ... default to INITIATOR */

drivers/scsi/hpsa.c

@@ -561,6 +561,7 @@ static struct scsi_host_template hpsa_driver_template = {
 	.sdev_attrs = hpsa_sdev_attrs,
 	.shost_attrs = hpsa_shost_attrs,
 	.max_sectors = 8192,
+	.no_write_same = 1,
 };
 
 
@@ -1288,7 +1289,7 @@ static void complete_scsi_command(struct CommandList *cp)
 					"has check condition: aborted command: "
 					"ASC: 0x%x, ASCQ: 0x%x\n",
 					cp, asc, ascq);
-				cmd->result = DID_SOFT_ERROR << 16;
+				cmd->result |= DID_SOFT_ERROR << 16;
 				break;
 			}
 			/* Must be some other type of check condition */
@@ -4925,7 +4926,7 @@ reinit_after_soft_reset:
 	hpsa_hba_inquiry(h);
 	hpsa_register_scsi(h);	/* hook ourselves into SCSI subsystem */
 	start_controller_lockup_detector(h);
-	return 1;
+	return 0;
 
 clean4:
 	hpsa_free_sg_chain_blocks(h);

drivers/scsi/ipr.c

@@ -6305,7 +6305,8 @@ static struct scsi_host_template driver_template = {
 	.use_clustering = ENABLE_CLUSTERING,
 	.shost_attrs = ipr_ioa_attrs,
 	.sdev_attrs = ipr_dev_attrs,
-	.proc_name = IPR_NAME
+	.proc_name = IPR_NAME,
+	.no_write_same = 1,
 };
 
 /**

drivers/scsi/ips.c

@@ -374,6 +374,7 @@ static struct scsi_host_template ips_driver_template = {
 	.sg_tablesize		= IPS_MAX_SG,
 	.cmd_per_lun		= 3,
 	.use_clustering		= ENABLE_CLUSTERING,
+	.no_write_same		= 1,
 };
 
 

drivers/scsi/libsas/sas_ata.c

@@ -211,7 +211,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
 		qc->tf.nsect = 0;
 	}
 
-	ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis);
+	ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis);
 	task->uldd_task = qc;
 	if (ata_is_atapi(qc->tf.protocol)) {
 		memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);

drivers/scsi/megaraid.c

@@ -4244,6 +4244,7 @@ static struct scsi_host_template megaraid_template = {
 	.eh_device_reset_handler	= megaraid_reset,
 	.eh_bus_reset_handler		= megaraid_reset,
 	.eh_host_reset_handler		= megaraid_reset,
+	.no_write_same			= 1,
 };
 
 static int

drivers/scsi/megaraid/megaraid_mbox.c

@@ -367,6 +367,7 @@ static struct scsi_host_template megaraid_template_g = {
 	.eh_host_reset_handler		= megaraid_reset_handler,
 	.change_queue_depth		= megaraid_change_queue_depth,
 	.use_clustering			= ENABLE_CLUSTERING,
+	.no_write_same			= 1,
 	.sdev_attrs			= megaraid_sdev_attrs,
 	.shost_attrs			= megaraid_shost_attrs,
 };

drivers/scsi/megaraid/megaraid_sas_base.c

@@ -2148,6 +2148,7 @@ static struct scsi_host_template megasas_template = {
 	.bios_param = megasas_bios_param,
 	.use_clustering = ENABLE_CLUSTERING,
 	.change_queue_depth = megasas_change_queue_depth,
+	.no_write_same = 1,
 };
 
 /**

drivers/scsi/pm8001/pm8001_hwi.c

@@ -3403,6 +3403,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	unsigned long flags;
 	u8 deviceType = pPayload->sas_identify.dev_type;
 	port->port_state =  portstate;
+	phy->phy_state = PHY_STATE_LINK_UP_SPC;
 	PM8001_MSG_DBG(pm8001_ha,
 		pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
 		port_id, phy_id));
@@ -3483,6 +3484,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d,"
 		" phy id = %d\n", port_id, phy_id));
 	port->port_state =  portstate;
+	phy->phy_state = PHY_STATE_LINK_UP_SPC;
 	port->port_attached = 1;
 	pm8001_get_lrate_mode(phy, link_rate);
 	phy->phy_type |= PORT_TYPE_SATA;

drivers/scsi/pm8001/pm8001_hwi.h

@@ -131,6 +131,10 @@
 #define LINKRATE_30			(0x02 << 8)
 #define LINKRATE_60			(0x04 << 8)
 
+/* for phy state */
+
+#define PHY_STATE_LINK_UP_SPC		0x1
+
 /* for new SPC controllers MEMBASE III is shared between BIOS and DATA */
 #define GSM_SM_BASE			0x4F0000
 struct mpi_msg_hdr{

drivers/scsi/pm8001/pm8001_init.c

@@ -175,20 +175,16 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
 static void pm8001_tasklet(unsigned long opaque)
 {
 	struct pm8001_hba_info *pm8001_ha;
-	u32 vec;
-	pm8001_ha = (struct pm8001_hba_info *)opaque;
+	struct isr_param *irq_vector;
+
+	irq_vector = (struct isr_param *)opaque;
+	pm8001_ha = irq_vector->drv_inst;
 	if (unlikely(!pm8001_ha))
 		BUG_ON(1);
-	vec = pm8001_ha->int_vector;
-	PM8001_CHIP_DISP->isr(pm8001_ha, vec);
+	PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
 }
 #endif
 
-static struct  pm8001_hba_info *outq_to_hba(u8 *outq)
-{
-	return container_of((outq - *outq), struct pm8001_hba_info, outq[0]);
-}
-
 /**
  * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
  * It obtains the vector number and calls the equivalent bottom
@@ -198,18 +194,20 @@ static struct  pm8001_hba_info *outq_to_hba(u8 *outq)
  */
 static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
 {
-	struct pm8001_hba_info *pm8001_ha = outq_to_hba(opaque);
-	u8 outq = *(u8 *)opaque;
+	struct isr_param *irq_vector;
+	struct pm8001_hba_info *pm8001_ha;
 	irqreturn_t ret = IRQ_HANDLED;
+	irq_vector = (struct isr_param *)opaque;
+	pm8001_ha = irq_vector->drv_inst;
+
 	if (unlikely(!pm8001_ha))
 		return IRQ_NONE;
 	if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
 		return IRQ_NONE;
-	pm8001_ha->int_vector = outq;
 #ifdef PM8001_USE_TASKLET
-	tasklet_schedule(&pm8001_ha->tasklet);
+	tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
 #else
-	ret = PM8001_CHIP_DISP->isr(pm8001_ha, outq);
+	ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
 #endif
 	return ret;
 }
@@ -230,9 +228,8 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 	if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
 		return IRQ_NONE;
 
-	pm8001_ha->int_vector = 0;
 #ifdef PM8001_USE_TASKLET
-	tasklet_schedule(&pm8001_ha->tasklet);
+	tasklet_schedule(&pm8001_ha->tasklet[0]);
 #else
 	ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
 #endif
@@ -457,7 +454,7 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 {
 	struct pm8001_hba_info *pm8001_ha;
 	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
-
+	int j;
 
 	pm8001_ha = sha->lldd_ha;
 	if (!pm8001_ha)
@@ -480,12 +477,14 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 		pm8001_ha->iomb_size = IOMB_SIZE_SPC;
 
 #ifdef PM8001_USE_TASKLET
-	/**
-	* default tasklet for non msi-x interrupt handler/first msi-x
-	* interrupt handler
-	**/
-	tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
-			(unsigned long)pm8001_ha);
+	/* Tasklet for non msi-x interrupt handler */
+	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+		tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+			(unsigned long)&(pm8001_ha->irq_vector[0]));
+	else
+		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+			tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+				(unsigned long)&(pm8001_ha->irq_vector[j]));
 #endif
 	pm8001_ioremap(pm8001_ha);
 	if (!pm8001_alloc(pm8001_ha, ent))
@@ -733,19 +732,20 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
 			"pci_enable_msix request ret:%d no of intr %d\n",
 					rc, pm8001_ha->number_of_intr));
 
-		for (i = 0; i < number_of_intr; i++)
-			pm8001_ha->outq[i] = i;
 
 		for (i = 0; i < number_of_intr; i++) {
 			snprintf(intr_drvname[i], sizeof(intr_drvname[0]),
 					DRV_NAME"%d", i);
+			pm8001_ha->irq_vector[i].irq_id = i;
+			pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
+
 			if (request_irq(pm8001_ha->msix_entries[i].vector,
 				pm8001_interrupt_handler_msix, flag,
-				intr_drvname[i], &pm8001_ha->outq[i])) {
+				intr_drvname[i], &(pm8001_ha->irq_vector[i]))) {
 				for (j = 0; j < i; j++)
 					free_irq(
 					pm8001_ha->msix_entries[j].vector,
-					&pm8001_ha->outq[j]);
+					&(pm8001_ha->irq_vector[i]));
 				pci_disable_msix(pm8001_ha->pdev);
 				break;
 			}
@@ -907,7 +907,7 @@ static void pm8001_pci_remove(struct pci_dev *pdev)
 {
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct pm8001_hba_info *pm8001_ha;
-	int i;
+	int i, j;
 	pm8001_ha = sha->lldd_ha;
 	sas_unregister_ha(sha);
 	sas_remove_host(pm8001_ha->shost);
@@ -921,13 +921,18 @@ static void pm8001_pci_remove(struct pci_dev *pdev)
 		synchronize_irq(pm8001_ha->msix_entries[i].vector);
 	for (i = 0; i < pm8001_ha->number_of_intr; i++)
 		free_irq(pm8001_ha->msix_entries[i].vector,
-				&pm8001_ha->outq[i]);
+				&(pm8001_ha->irq_vector[i]));
 	pci_disable_msix(pdev);
 #else
 	free_irq(pm8001_ha->irq, sha);
 #endif
 #ifdef PM8001_USE_TASKLET
-	tasklet_kill(&pm8001_ha->tasklet);
+	/* For non-msix and msix interrupts */
+	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+		tasklet_kill(&pm8001_ha->tasklet[0]);
+	else
+		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+			tasklet_kill(&pm8001_ha->tasklet[j]);
 #endif
 	pm8001_free(pm8001_ha);
 	kfree(sha->sas_phy);
@@ -948,7 +953,7 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct pm8001_hba_info *pm8001_ha;
-	int i;
+	int  i, j;
 	u32 device_state;
 	pm8001_ha = sha->lldd_ha;
 	flush_workqueue(pm8001_wq);
@@ -964,13 +969,18 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 		synchronize_irq(pm8001_ha->msix_entries[i].vector);
 	for (i = 0; i < pm8001_ha->number_of_intr; i++)
 		free_irq(pm8001_ha->msix_entries[i].vector,
-				&pm8001_ha->outq[i]);
+				&(pm8001_ha->irq_vector[i]));
 	pci_disable_msix(pdev);
 #else
 	free_irq(pm8001_ha->irq, sha);
 #endif
 #ifdef PM8001_USE_TASKLET
-	tasklet_kill(&pm8001_ha->tasklet);
+	/* For non-msix and msix interrupts */
+	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+		tasklet_kill(&pm8001_ha->tasklet[0]);
+	else
+		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+			tasklet_kill(&pm8001_ha->tasklet[j]);
 #endif
 	device_state = pci_choose_state(pdev, state);
 	pm8001_printk("pdev=0x%p, slot=%s, entering "
@@ -993,7 +1003,7 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct pm8001_hba_info *pm8001_ha;
 	int rc;
-	u8 i = 0;
+	u8 i = 0, j;
 	u32 device_state;
 	pm8001_ha = sha->lldd_ha;
 	device_state = pdev->current_state;
@@ -1033,10 +1043,14 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
 	if (rc)
 		goto err_out_disable;
 #ifdef PM8001_USE_TASKLET
-	/* default tasklet for non msi-x interrupt handler/first msi-x
-	* interrupt handler */
-	tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
-			(unsigned long)pm8001_ha);
+	/*  Tasklet for non msi-x interrupt handler */
+	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+		tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+			(unsigned long)&(pm8001_ha->irq_vector[0]));
+	else
+		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+			tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+				(unsigned long)&(pm8001_ha->irq_vector[j]));
 #endif
 	PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
 	if (pm8001_ha->chip_id != chip_8001) {
@@ -1169,6 +1183,7 @@ module_exit(pm8001_exit);
 MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
 MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
 MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
+MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
 MODULE_DESCRIPTION(
 		"PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 "
 		"SAS/SATA controller driver");

drivers/scsi/pm8001/pm8001_sas.c

@@ -1098,15 +1098,17 @@ int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
 	struct pm8001_tmf_task tmf_task;
 	struct pm8001_device *pm8001_dev = dev->lldd_dev;
 	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+	DECLARE_COMPLETION_ONSTACK(completion_setstate);
 	if (dev_is_sata(dev)) {
 		struct sas_phy *phy = sas_get_local_phy(dev);
 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 			dev, 1, 0);
 		rc = sas_phy_reset(phy, 1);
 		sas_put_local_phy(phy);
+		pm8001_dev->setds_completion = &completion_setstate;
 		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
 			pm8001_dev, 0x01);
-		msleep(2000);
+		wait_for_completion(&completion_setstate);
 	} else {
 		tmf_task.tmf = TMF_LU_RESET;
 		rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);

drivers/scsi/pm8001/pm8001_sas.h

@@ -466,6 +466,10 @@ struct pm8001_hba_memspace {
 	u64			membase;
 	u32			memsize;
 };
+struct isr_param {
+	struct pm8001_hba_info *drv_inst;
+	u32 irq_id;
+};
 struct pm8001_hba_info {
 	char			name[PM8001_NAME_LENGTH];
 	struct list_head	list;
@@ -519,14 +523,13 @@ struct pm8001_hba_info {
 	int			number_of_intr;/*will be used in remove()*/
 #endif
 #ifdef PM8001_USE_TASKLET
-	struct tasklet_struct	tasklet;
+	struct tasklet_struct	tasklet[PM8001_MAX_MSIX_VEC];
 #endif
 	u32			logging_level;
 	u32			fw_status;
 	u32			smp_exp_mode;
-	u32			int_vector;
 	const struct firmware 	*fw_image;
-	u8			outq[PM8001_MAX_MSIX_VEC];
+	struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
 };
 
 struct pm8001_work {

drivers/scsi/pm8001/pm80xx_hwi.c

@@ -2894,6 +2894,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	unsigned long flags;
 	u8 deviceType = pPayload->sas_identify.dev_type;
 	port->port_state = portstate;
+	phy->phy_state = PHY_STATE_LINK_UP_SPCV;
 	PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
 		"portid:%d; phyid:%d; linkrate:%d; "
 		"portstate:%x; devicetype:%x\n",
@@ -2978,6 +2979,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 				port_id, phy_id, link_rate, portstate));
 
 	port->port_state = portstate;
+	phy->phy_state = PHY_STATE_LINK_UP_SPCV;
 	port->port_attached = 1;
 	pm8001_get_lrate_mode(phy, link_rate);
 	phy->phy_type |= PORT_TYPE_SATA;

drivers/scsi/pm8001/pm80xx_hwi.h

@@ -215,6 +215,8 @@
 #define SAS_DOPNRJT_RTRY_TMO            128
 #define SAS_COPNRJT_RTRY_TMO            128
 
+/* for phy state */
+#define PHY_STATE_LINK_UP_SPCV		0x2
 /*
   Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
   Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128

drivers/scsi/pmcraid.c

@@ -4325,6 +4325,7 @@ static struct scsi_host_template pmcraid_host_template = {
 	.this_id = -1,
 	.sg_tablesize = PMCRAID_MAX_IOADLS,
 	.max_sectors = PMCRAID_IOA_MAX_SECTORS,
+	.no_write_same = 1,
 	.cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN,
 	.use_clustering = ENABLE_CLUSTERING,
 	.shost_attrs = pmcraid_host_attrs,

drivers/scsi/sd.c

@@ -2659,6 +2659,12 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
 {
 	struct scsi_device *sdev = sdkp->device;
 
+	if (sdev->host->no_write_same) {
+		sdev->no_write_same = 1;
+
+		return;
+	}
+
 	if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
 		/* too large values might cause issues with arcmsr */
 		int vpd_buf_len = 64;

drivers/scsi/storvsc_drv.c

@@ -1697,6 +1697,7 @@ static struct scsi_host_template scsi_driver = {
 	.use_clustering =	DISABLE_CLUSTERING,
 	/* Make sure we dont get a sg segment crosses a page boundary */
 	.dma_boundary =		PAGE_SIZE-1,
+	.no_write_same =	1,
 };
 
 enum {

include/scsi/scsi_host.h

@@ -475,6 +475,9 @@ struct scsi_host_template {
 	 */
 	unsigned ordered_tag:1;
 
+	/* True if the controller does not support WRITE SAME */
+	unsigned no_write_same:1;
+
 	/*
 	 * Countdown for host blocking with no commands outstanding.
 	 */
@@ -677,6 +680,9 @@ struct Scsi_Host {
 	/* Don't resume host in EH */
 	unsigned eh_noresume:1;
 
+	/* The controller does not support WRITE SAME */
+	unsigned no_write_same:1;
+
 	/*
 	 * Optional work queue to be utilized by the transport
 	 */