Merge tag 'v2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus

Documentation/DocBook/media-entities.tmpl

@@ -294,6 +294,7 @@
 <!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
 <!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
 <!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
+<!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml">
 <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml">
 <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml">
 <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">

Documentation/DocBook/v4l/media-ioc-setup-link.xml

@@ -34,7 +34,7 @@
       <varlistentry>
 	<term><parameter>request</parameter></term>
 	<listitem>
-	  <para>MEDIA_IOC_ENUM_LINKS</para>
+	  <para>MEDIA_IOC_SETUP_LINK</para>
 	</listitem>
       </varlistentry>
       <varlistentry>

Documentation/DocBook/v4l/pixfmt-y12.xml

@@ -0,0 +1,79 @@
+<refentry id="V4L2-PIX-FMT-Y12">
+  <refmeta>
+    <refentrytitle>V4L2_PIX_FMT_Y12 ('Y12 ')</refentrytitle>
+    &manvol;
+  </refmeta>
+  <refnamediv>
+    <refname><constant>V4L2_PIX_FMT_Y12</constant></refname>
+    <refpurpose>Grey-scale image</refpurpose>
+  </refnamediv>
+  <refsect1>
+    <title>Description</title>
+
+    <para>This is a grey-scale image with a depth of 12 bits per pixel. Pixels
+are stored in 16-bit words with unused high bits padded with 0. The least
+significant byte is stored at lower memory addresses (little-endian).</para>
+
+    <example>
+      <title><constant>V4L2_PIX_FMT_Y12</constant> 4 &times; 4
+pixel image</title>
+
+      <formalpara>
+	<title>Byte Order.</title>
+	<para>Each cell is one byte.
+	  <informaltable frame="none">
+	    <tgroup cols="9" align="center">
+	      <colspec align="left" colwidth="2*" />
+	      <tbody valign="top">
+		<row>
+		  <entry>start&nbsp;+&nbsp;0:</entry>
+		  <entry>Y'<subscript>00low</subscript></entry>
+		  <entry>Y'<subscript>00high</subscript></entry>
+		  <entry>Y'<subscript>01low</subscript></entry>
+		  <entry>Y'<subscript>01high</subscript></entry>
+		  <entry>Y'<subscript>02low</subscript></entry>
+		  <entry>Y'<subscript>02high</subscript></entry>
+		  <entry>Y'<subscript>03low</subscript></entry>
+		  <entry>Y'<subscript>03high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;8:</entry>
+		  <entry>Y'<subscript>10low</subscript></entry>
+		  <entry>Y'<subscript>10high</subscript></entry>
+		  <entry>Y'<subscript>11low</subscript></entry>
+		  <entry>Y'<subscript>11high</subscript></entry>
+		  <entry>Y'<subscript>12low</subscript></entry>
+		  <entry>Y'<subscript>12high</subscript></entry>
+		  <entry>Y'<subscript>13low</subscript></entry>
+		  <entry>Y'<subscript>13high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;16:</entry>
+		  <entry>Y'<subscript>20low</subscript></entry>
+		  <entry>Y'<subscript>20high</subscript></entry>
+		  <entry>Y'<subscript>21low</subscript></entry>
+		  <entry>Y'<subscript>21high</subscript></entry>
+		  <entry>Y'<subscript>22low</subscript></entry>
+		  <entry>Y'<subscript>22high</subscript></entry>
+		  <entry>Y'<subscript>23low</subscript></entry>
+		  <entry>Y'<subscript>23high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;24:</entry>
+		  <entry>Y'<subscript>30low</subscript></entry>
+		  <entry>Y'<subscript>30high</subscript></entry>
+		  <entry>Y'<subscript>31low</subscript></entry>
+		  <entry>Y'<subscript>31high</subscript></entry>
+		  <entry>Y'<subscript>32low</subscript></entry>
+		  <entry>Y'<subscript>32high</subscript></entry>
+		  <entry>Y'<subscript>33low</subscript></entry>
+		  <entry>Y'<subscript>33high</subscript></entry>
+		</row>
+	      </tbody>
+	    </tgroup>
+	  </informaltable>
+	</para>
+      </formalpara>
+    </example>
+  </refsect1>
+</refentry>

Documentation/DocBook/v4l/pixfmt.xml

@@ -696,6 +696,7 @@ information.</para>
     &sub-packed-yuv;
     &sub-grey;
     &sub-y10;
+    &sub-y12;
     &sub-y16;
     &sub-yuyv;
     &sub-uyvy;

Documentation/DocBook/v4l/subdev-formats.xml

@@ -456,6 +456,23 @@
 	      <entry>b<subscript>1</subscript></entry>
 	      <entry>b<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-SGBRG8-1X8">
+	      <entry>V4L2_MBUS_FMT_SGBRG8_1X8</entry>
+	      <entry>0x3013</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-SGRBG8-1X8">
 	      <entry>V4L2_MBUS_FMT_SGRBG8_1X8</entry>
 	      <entry>0x3002</entry>
@@ -473,6 +490,23 @@
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-SRGGB8-1X8">
+	      <entry>V4L2_MBUS_FMT_SRGGB8_1X8</entry>
+	      <entry>0x3014</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-SBGGR10-DPCM8-1X8">
 	      <entry>V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8</entry>
 	      <entry>0x300b</entry>
@@ -2159,6 +2193,31 @@
 	      <entry>u<subscript>1</subscript></entry>
 	      <entry>u<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-Y12-1X12">
+	      <entry>V4L2_MBUS_FMT_Y12_1X12</entry>
+	      <entry>0x2013</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>y<subscript>11</subscript></entry>
+	      <entry>y<subscript>10</subscript></entry>
+	      <entry>y<subscript>9</subscript></entry>
+	      <entry>y<subscript>8</subscript></entry>
+	      <entry>y<subscript>7</subscript></entry>
+	      <entry>y<subscript>6</subscript></entry>
+	      <entry>y<subscript>5</subscript></entry>
+	      <entry>y<subscript>4</subscript></entry>
+	      <entry>y<subscript>3</subscript></entry>
+	      <entry>y<subscript>2</subscript></entry>
+	      <entry>y<subscript>1</subscript></entry>
+	      <entry>y<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-UYVY8-1X16">
 	      <entry>V4L2_MBUS_FMT_UYVY8_1X16</entry>
 	      <entry>0x200f</entry>

Documentation/cgroups/memory.txt

@@ -52,8 +52,10 @@ Brief summary of control files.
  tasks				 # attach a task(thread) and show list of threads
  cgroup.procs			 # show list of processes
  cgroup.event_control		 # an interface for event_fd()
- memory.usage_in_bytes		 # show current memory(RSS+Cache) usage.
- memory.memsw.usage_in_bytes	 # show current memory+Swap usage
+ memory.usage_in_bytes		 # show current res_counter usage for memory
+				 (See 5.5 for details)
+ memory.memsw.usage_in_bytes	 # show current res_counter usage for memory+Swap
+				 (See 5.5 for details)
  memory.limit_in_bytes		 # set/show limit of memory usage
  memory.memsw.limit_in_bytes	 # set/show limit of memory+Swap usage
  memory.failcnt			 # show the number of memory usage hits limits
@@ -453,6 +455,15 @@ memory under it will be reclaimed.
 You can reset failcnt by writing 0 to failcnt file.
 # echo 0 > .../memory.failcnt
 
+5.5 usage_in_bytes
+
+For efficiency, as other kernel components, memory cgroup uses some optimization
+to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the
+method and doesn't show 'exact' value of memory(and swap) usage, it's an fuzz
+value for efficient access. (Of course, when necessary, it's synchronized.)
+If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
+value in memory.stat(see 5.2).
+
 6. Hierarchy support
 
 The memory controller supports a deep hierarchy and hierarchical accounting.

Documentation/flexible-arrays.txt

@@ -66,10 +66,10 @@ trick is to ensure that any needed memory allocations are done before
 entering atomic context, using:
 
     int flex_array_prealloc(struct flex_array *array, unsigned int start,
-			    unsigned int end, gfp_t flags);
+			    unsigned int nr_elements, gfp_t flags);
 
 This function will ensure that memory for the elements indexed in the range
-defined by start and end has been allocated.  Thereafter, a
+defined by start and nr_elements has been allocated.  Thereafter, a
 flex_array_put() call on an element in that range is guaranteed not to
 block.
 

Documentation/hwmon/adm1021

@@ -14,10 +14,6 @@ Supported chips:
     Prefix: 'gl523sm'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
     Datasheet:
-  * Intel Xeon Processor
-    Prefix: - any other - may require 'force_adm1021' parameter
-    Addresses scanned: none
-    Datasheet: Publicly available at Intel website
   * Maxim MAX1617
     Prefix: 'max1617'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
@@ -91,21 +87,27 @@ will do no harm, but will return 'old' values. It is possible to make
 ADM1021-clones do faster measurements, but there is really no good reason
 for that.
 
-Xeon support
-------------
 
-Some Xeon processors have real max1617, adm1021, or compatible chips
-within them, with two temperature sensors.
+Netburst-based Xeon support
+---------------------------
 
-Other Xeons have chips with only one sensor.
+Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to
+2003) microarchitecture had real MAX1617, ADM1021, or compatible chips
+within them, with two temperature sensors. Other Xeon processors of this
+era (with 400 MHz FSB) had chips with only one temperature sensor.
 
-If you have a Xeon, and the adm1021 module loads, and both temperatures
-appear valid, then things are good.
+If you have such an old Xeon, and you get two valid temperatures when
+loading the adm1021 module, then things are good.
 
-If the adm1021 module doesn't load, you should try this:
-	modprobe adm1021 force_adm1021=BUS,ADDRESS
-	ADDRESS can only be 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e.
+If nothing happens when loading the adm1021 module, and you are certain
+that your specific Xeon processor model includes compatible sensors, you
+will have to explicitly instantiate the sensor chips from user-space. See
+method 4 in Documentation/i2c/instantiating-devices. Possible slave
+addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that
+only temp2 will be correct and temp1 will have to be ignored.
 
-If you have dual Xeons you may have appear to have two separate
-adm1021-compatible chips, or two single-temperature sensors, at distinct
-addresses.
+Previous generations of the Xeon processor (based on Pentium II/III)
+didn't have these sensors. Next generations of Xeon processors (533 MHz
+FSB and faster) lost them, until the Core-based generation which
+introduced integrated digital thermal sensors. These are supported by
+the coretemp driver.

Documentation/hwmon/lm90

@@ -32,6 +32,16 @@ Supported chips:
     Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the ON Semiconductor website
                http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461
+  * Analog Devices ADT7461A
+    Prefix: 'adt7461a'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: Publicly available at the ON Semiconductor website
+               http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A
+  * ON Semiconductor NCT1008
+    Prefix: 'nct1008'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: Publicly available at the ON Semiconductor website
+               http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
   * Maxim MAX6646
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4d
@@ -149,7 +159,7 @@ ADM1032:
   * ALERT is triggered by open remote sensor.
   * SMBus PEC support for Write Byte and Receive Byte transactions.
 
-ADT7461:
+ADT7461, ADT7461A, NCT1008:
   * Extended temperature range (breaks compatibility)
   * Lower resolution for remote temperature
 
@@ -195,9 +205,9 @@ are exported, one for each channel, but these values are of course linked.
 Only the local hysteresis can be set from user-space, and the same delta
 applies to the remote hysteresis.
 
-The lm90 driver will not update its values more frequently than every
-other second; reading them more often will do no harm, but will return
-'old' values.
+The lm90 driver will not update its values more frequently than configured with
+the update_interval attribute; reading them more often will do no harm, but will
+return 'old' values.
 
 SMBus Alert Support
 -------------------
@@ -205,11 +215,12 @@ SMBus Alert Support
 This driver has basic support for SMBus alert. When an alert is received,
 the status register is read and the faulty temperature channel is logged.
 
-The Analog Devices chips (ADM1032 and ADT7461) do not implement the SMBus
-alert protocol properly so additional care is needed: the ALERT output is
-disabled when an alert is received, and is re-enabled only when the alarm
-is gone. Otherwise the chip would block alerts from other chips in the bus
-as long as the alarm is active.
+The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON
+Semiconductor chips (NCT1008) do not implement the SMBus alert protocol
+properly so additional care is needed: the ALERT output is disabled when
+an alert is received, and is re-enabled only when the alarm is gone.
+Otherwise the chip would block alerts from other chips in the bus as long
+as the alarm is active.
 
 PEC Support
 -----------

Documentation/video4linux/sh_mobile_ceu_camera.txt

@@ -37,7 +37,7 @@ Generic scaling / cropping scheme
 -1'-
 
 In the above chart minuses and slashes represent "real" data amounts, points and
-accents represent "useful" data, basically, CEU scaled amd cropped output,
+accents represent "useful" data, basically, CEU scaled and cropped output,
 mapped back onto the client's source plane.
 
 Such a configuration can be produced by user requests:
@@ -65,7 +65,7 @@ Do not touch input rectangle - it is already optimal.
 
 1. Calculate current sensor scales:
 
-	scale_s = ((3') - (3)) / ((2') - (2))
+	scale_s = ((2') - (2)) / ((3') - (3))
 
 2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
 current sensor scales onto input window - this is user S_CROP:
@@ -80,7 +80,7 @@ window:
 4. Calculate sensor output window by applying combined scales to real input
 window:
 
-	width_s_out = ((2') - (2)) / scale_comb
+	width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb
 
 5. Apply iterative sensor S_FMT for sensor output window.
 

Documentation/workqueue.txt

@@ -12,6 +12,7 @@ CONTENTS
 4. Application Programming Interface (API)
 5. Example Execution Scenarios
 6. Guidelines
+7. Debugging
 
 
 1. Introduction
@@ -379,3 +380,42 @@ If q1 has WQ_CPU_INTENSIVE set,
 * Unless work items are expected to consume a huge amount of CPU
   cycles, using a bound wq is usually beneficial due to the increased
   level of locality in wq operations and work item execution.
+
+
+7. Debugging
+
+Because the work functions are executed by generic worker threads
+there are a few tricks needed to shed some light on misbehaving
+workqueue users.
+
+Worker threads show up in the process list as:
+
+root      5671  0.0  0.0      0     0 ?        S    12:07   0:00 [kworker/0:1]
+root      5672  0.0  0.0      0     0 ?        S    12:07   0:00 [kworker/1:2]
+root      5673  0.0  0.0      0     0 ?        S    12:12   0:00 [kworker/0:0]
+root      5674  0.0  0.0      0     0 ?        S    12:13   0:00 [kworker/1:0]
+
+If kworkers are going crazy (using too much cpu), there are two types
+of possible problems:
+
+	1. Something beeing scheduled in rapid succession
+	2. A single work item that consumes lots of cpu cycles
+
+The first one can be tracked using tracing:
+
+	$ echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event
+	$ cat /sys/kernel/debug/tracing/trace_pipe > out.txt
+	(wait a few secs)
+	^C
+
+If something is busy looping on work queueing, it would be dominating
+the output and the offender can be determined with the work item
+function.
+
+For the second type of problems it should be possible to just check
+the stack trace of the offending worker thread.
+
+	$ cat /proc/THE_OFFENDING_KWORKER/stack
+
+The work item's function should be trivially visible in the stack
+trace.

MAINTAINERS

@@ -1032,12 +1032,13 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c64xx/
 
-ARM/S5P ARM ARCHITECTURES
+ARM/S5P EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-s5p*/
+F:	arch/arm/mach-exynos*/
 
 ARM/SAMSUNG MOBILE MACHINE SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
@@ -2808,42 +2809,23 @@ GPIO SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
 S:	Maintained
 T:	git git://git.secretlab.ca/git/linux-2.6.git
-F:	Documentation/gpio/gpio.txt
+F:	Documentation/gpio.txt
 F:	drivers/gpio/
 F:	include/linux/gpio*
 
+GRE DEMULTIPLEXER DRIVER
+M:	Dmitry Kozlov <xeb@mail.ru>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	net/ipv4/gre.c
+F:	include/net/gre.h
+
 GRETH 10/100/1G Ethernet MAC device driver
 M:	Kristoffer Glembo <kristoffer@gaisler.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/greth*
 
-HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-M:	Frank Seidel <frank@f-seidel.de>
-L:	platform-driver-x86@vger.kernel.org
-W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
-S:	Maintained
-F:	drivers/platform/x86/hdaps.c
-
-HWPOISON MEMORY FAILURE HANDLING
-M:	Andi Kleen <andi@firstfloor.org>
-L:	linux-mm@kvack.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison
-S:	Maintained
-F:	mm/memory-failure.c
-F:	mm/hwpoison-inject.c
-
-HYPERVISOR VIRTUAL CONSOLE DRIVER
-L:	linuxppc-dev@lists.ozlabs.org
-S:	Odd Fixes
-F:	drivers/tty/hvc/
-
-iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
-M:	Peter Jones <pjones@redhat.com>
-M:	Konrad Rzeszutek Wilk <konrad@kernel.org>
-S:	Maintained
-F:	drivers/firmware/iscsi_ibft*
-
 GSPCA FINEPIX SUBDRIVER
 M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
@@ -2894,6 +2876,26 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/
 
+HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
+M:	Frank Seidel <frank@f-seidel.de>
+L:	platform-driver-x86@vger.kernel.org
+W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
+S:	Maintained
+F:	drivers/platform/x86/hdaps.c
+
+HWPOISON MEMORY FAILURE HANDLING
+M:	Andi Kleen <andi@firstfloor.org>
+L:	linux-mm@kvack.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison
+S:	Maintained
+F:	mm/memory-failure.c
+F:	mm/hwpoison-inject.c
+
+HYPERVISOR VIRTUAL CONSOLE DRIVER
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Odd Fixes
+F:	drivers/tty/hvc/
+
 HARDWARE MONITORING
 M:	Jean Delvare <khali@linux-fr.org>
 M:	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -3477,6 +3479,12 @@ F:	Documentation/isapnp.txt
 F:	drivers/pnp/isapnp/
 F:	include/linux/isapnp.h
 
+iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
+M:	Peter Jones <pjones@redhat.com>
+M:	Konrad Rzeszutek Wilk <konrad@kernel.org>
+S:	Maintained
+F:	drivers/firmware/iscsi_ibft*
+
 ISCSI
 M:	Mike Christie <michaelc@cs.wisc.edu>
 L:	open-iscsi@googlegroups.com
@@ -4988,6 +4996,13 @@ F:	Documentation/pps/
 F:	drivers/pps/
 F:	include/linux/pps*.h
 
+PPTP DRIVER
+M:	Dmitry Kozlov <xeb@mail.ru>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/pptp.c
+W:	http://sourceforge.net/projects/accel-pptp
+
 PREEMPTIBLE KERNEL
 M:	Robert Love <rml@tech9.net>
 L:	kpreempt-tech@lists.sourceforge.net
@@ -6555,7 +6570,7 @@ S:	Maintained
 F:	drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-M:	David Brownell <dbrownell@users.sourceforge.net>
+M:	Oliver Neukum <oneukum@suse.de>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
@@ -6921,6 +6936,18 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
 S:	Maintained
 F:	drivers/platform/x86
 
+XEN HYPERVISOR INTERFACE
+M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
+M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
+L:	virtualization@lists.linux-foundation.org
+S:	Supported
+F:	arch/x86/xen/
+F:	drivers/*/xen-*front.c
+F:	drivers/xen/
+F:	arch/x86/include/asm/xen/
+F:	include/xen/
+
 XEN NETWORK BACKEND DRIVER
 M:	Ian Campbell <ian.campbell@citrix.com>
 L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
@@ -6942,18 +6969,6 @@ S:	Supported
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
 
-XEN HYPERVISOR INTERFACE
-M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
-L:	virtualization@lists.linux-foundation.org
-S:	Supported
-F:	arch/x86/xen/
-F:	drivers/*/xen-*front.c
-F:	drivers/xen/
-F:	arch/x86/include/asm/xen/
-F:	include/xen/
-
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
 M:	Alex Elder <aelder@sgi.com>
@@ -7023,20 +7038,6 @@ M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/tty/serial/zs.*
 
-GRE DEMULTIPLEXER DRIVER
-M:	Dmitry Kozlov <xeb@mail.ru>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	net/ipv4/gre.c
-F:	include/net/gre.h
-
-PPTP DRIVER
-M:	Dmitry Kozlov <xeb@mail.ru>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/pptp.c
-W:	http://sourceforge.net/projects/accel-pptp
-
 THE REST
 M:	Linus Torvalds <torvalds@linux-foundation.org>
 L:	linux-kernel@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 39
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/alpha/include/asm/unistd.h

@@ -452,10 +452,14 @@
 #define __NR_fanotify_init		494
 #define __NR_fanotify_mark		495
 #define __NR_prlimit64			496
+#define __NR_name_to_handle_at		497
+#define __NR_open_by_handle_at		498
+#define __NR_clock_adjtime		499
+#define __NR_syncfs			500
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			497
+#define NR_SYSCALLS			501
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR

arch/alpha/kernel/systbls.S

@@ -498,23 +498,27 @@ sys_call_table:
 	.quad sys_ni_syscall			/* sys_timerfd */
 	.quad sys_eventfd
 	.quad sys_recvmmsg
-	.quad sys_fallocate				/* 480 */
+	.quad sys_fallocate			/* 480 */
 	.quad sys_timerfd_create
 	.quad sys_timerfd_settime
 	.quad sys_timerfd_gettime
 	.quad sys_signalfd4
-	.quad sys_eventfd2				/* 485 */
+	.quad sys_eventfd2			/* 485 */
 	.quad sys_epoll_create1
 	.quad sys_dup3
 	.quad sys_pipe2
 	.quad sys_inotify_init1
-	.quad sys_preadv				/* 490 */
+	.quad sys_preadv			/* 490 */
 	.quad sys_pwritev
 	.quad sys_rt_tgsigqueueinfo
 	.quad sys_perf_event_open
 	.quad sys_fanotify_init
-	.quad sys_fanotify_mark				/* 495 */
+	.quad sys_fanotify_mark			/* 495 */
 	.quad sys_prlimit64
+	.quad sys_name_to_handle_at
+	.quad sys_open_by_handle_at
+	.quad sys_clock_adjtime
+	.quad sys_syncfs			/* 500 */
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

arch/alpha/kernel/time.c

@@ -375,8 +375,7 @@ static struct clocksource clocksource_rpcc = {
 
 static inline void register_rpcc_clocksource(long cycle_freq)
 {
-	clocksource_calc_mult_shift(&clocksource_rpcc, cycle_freq, 4);
-	clocksource_register(&clocksource_rpcc);
+	clocksource_register_hz(&clocksource_rpcc, cycle_freq);
 }
 #else /* !CONFIG_SMP */
 static inline void register_rpcc_clocksource(long cycle_freq)

arch/arm/boot/compressed/Makefile

@@ -74,7 +74,7 @@ ZTEXTADDR	:= $(CONFIG_ZBOOT_ROM_TEXT)
 ZBSSADDR	:= $(CONFIG_ZBOOT_ROM_BSS)
 else
 ZTEXTADDR	:= 0
-ZBSSADDR	:= ALIGN(4)
+ZBSSADDR	:= ALIGN(8)
 endif
 
 SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/

arch/arm/boot/compressed/head.S

@@ -179,15 +179,14 @@ not_angel:
 		bl	cache_on
 
 restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r5, r6, r9, r11, r12}
-		ldr	sp, [r0, #32]
+		ldmia	r0, {r1, r2, r3, r6, r9, r11, r12}
+		ldr	sp, [r0, #28]
 
 		/*
 		 * We might be running at a different address.  We need
 		 * to fix up various pointers.
 		 */
 		sub	r0, r0, r1		@ calculate the delta offset
-		add	r5, r5, r0		@ _start
 		add	r6, r6, r0		@ _edata
 
 #ifndef CONFIG_ZBOOT_ROM
@@ -206,31 +205,40 @@ restart:	adr	r0, LC0
 /*
  * Check to see if we will overwrite ourselves.
  *   r4  = final kernel address
- *   r5  = start of this image
  *   r9  = size of decompressed image
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
  * We basically want:
- *   r4 >= r10 -> OK
- *   r4 + image length <= r5 -> OK
+ *   r4 - 16k page directory >= r10 -> OK
+ *   r4 + image length <= current position (pc) -> OK
  */
+		add	r10, r10, #16384
 		cmp	r4, r10
 		bhs	wont_overwrite
 		add	r10, r4, r9
-		cmp	r10, r5
+   ARM(		cmp	r10, pc		)
+ THUMB(		mov	lr, pc		)
+ THUMB(		cmp	r10, lr		)
 		bls	wont_overwrite
 
 /*
  * Relocate ourselves past the end of the decompressed kernel.
- *   r5  = start of this image
  *   r6  = _edata
  *   r10 = end of the decompressed kernel
  * Because we always copy ahead, we need to do it from the end and go
  * backward in case the source and destination overlap.
  */
-		/* Round up to next 256-byte boundary. */
-		add	r10, r10, #256
+		/*
+		 * Bump to the next 256-byte boundary with the size of
+		 * the relocation code added. This avoids overwriting
+		 * ourself when the offset is small.
+		 */
+		add	r10, r10, #((reloc_code_end - restart + 256) & ~255)
 		bic	r10, r10, #255
 
+		/* Get start of code we want to copy and align it down. */
+		adr	r5, restart
+		bic	r5, r5, #31
+
 		sub	r9, r6, r5		@ size to copy
 		add	r9, r9, #31		@ rounded up to a multiple
 		bic	r9, r9, #31		@ ... of 32 bytes
@@ -245,6 +253,11 @@ restart:	adr	r0, LC0
 		/* Preserve offset to relocated code. */
 		sub	r6, r9, r6
 
+#ifndef CONFIG_ZBOOT_ROM
+		/* cache_clean_flush may use the stack, so relocate it */
+		add	sp, sp, r6
+#endif
+
 		bl	cache_clean_flush
 
 		adr	r0, BSYM(restart)
@@ -333,7 +346,6 @@ not_relocated:	mov	r0, #0
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	_start			@ r5
 		.word	_edata			@ r6
 		.word	_image_size		@ r9
 		.word	_got_start		@ r11
@@ -1062,6 +1074,7 @@ memdump:	mov	r12, r0
 #endif
 
 		.ltorg
+reloc_code_end:
 
 		.align
 		.section ".stack", "aw", %nobits

arch/arm/boot/compressed/vmlinux.lds.in

@@ -54,6 +54,7 @@ SECTIONS
   .bss			: { *(.bss) }
   _end = .;
 
+  . = ALIGN(8);		/* the stack must be 64-bit aligned */
   .stack		: { *(.stack) }
 
   .stab 0		: { *(.stab) }

arch/arm/configs/at91x40_defconfig

@@ -0,0 +1,48 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91X40=y
+CONFIG_MACH_AT91EB01=y
+CONFIG_AT91_EARLY_USART0=y
+CONFIG_CPU_ARM7TDMI=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x01000000
+CONFIG_DRAM_SIZE=0x00400000
+CONFIG_FLASH_MEM_BASE=0x01400000
+CONFIG_PROCESSOR_ID=0x14000040
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+# CONFIG_SUSPEND is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set

arch/arm/include/asm/kprobes.h

@@ -39,10 +39,13 @@ typedef u32 kprobe_opcode_t;
 struct kprobe;
 typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
 
+typedef unsigned long (kprobe_check_cc)(unsigned long);
+
 /* Architecture specific copy of original instruction. */
 struct arch_specific_insn {
 	kprobe_opcode_t		*insn;
 	kprobe_insn_handler_t	*insn_handler;
+	kprobe_check_cc		*insn_check_cc;
 };
 
 struct prev_kprobe {

arch/arm/include/asm/system.h

@@ -159,7 +159,7 @@ extern unsigned int user_debug;
 #include <mach/barriers.h>
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
 #define mb()		do { dsb(); outer_sync(); } while (0)
-#define rmb()		dmb()
+#define rmb()		dsb()
 #define wmb()		mb()
 #else
 #include <asm/memory.h>

arch/arm/kernel/kprobes.c

@@ -134,7 +134,8 @@ static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs,
 				 struct kprobe_ctlblk *kcb)
 {
 	regs->ARM_pc += 4;
-	p->ainsn.insn_handler(p, regs);
+	if (p->ainsn.insn_check_cc(regs->ARM_cpsr))
+		p->ainsn.insn_handler(p, regs);
 }
 
 /*

arch/arm/kernel/perf_event.c

@@ -746,7 +746,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 
 	tail = (struct frame_tail __user *)regs->ARM_fp - 1;
 
-	while (tail && !((unsigned long)tail & 0x3))
+	while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
+	       tail && !((unsigned long)tail & 0x3))
 		tail = user_backtrace(tail, entry);
 }
 

arch/arm/kernel/ptrace.c

@@ -767,12 +767,20 @@ long arch_ptrace(struct task_struct *child, long request,
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 		case PTRACE_GETHBPREGS:
+			if (ptrace_get_breakpoints(child) < 0)
+				return -ESRCH;
+
 			ret = ptrace_gethbpregs(child, addr,
 						(unsigned long __user *)data);
+			ptrace_put_breakpoints(child);
 			break;
 		case PTRACE_SETHBPREGS:
+			if (ptrace_get_breakpoints(child) < 0)
+				return -ESRCH;
+
 			ret = ptrace_sethbpregs(child, addr,
 						(unsigned long __user *)data);
+			ptrace_put_breakpoints(child);
 			break;
 #endif
 

arch/arm/kernel/signal.c

@@ -597,45 +597,19 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
 	return err;
 }
 
-static inline void setup_syscall_restart(struct pt_regs *regs)
-{
-	regs->ARM_r0 = regs->ARM_ORIG_r0;
-	regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
-}
-
 /*
  * OK, we're invoking a handler
  */	
 static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset,
-	      struct pt_regs * regs, int syscall)
+	      struct pt_regs * regs)
 {
 	struct thread_info *thread = current_thread_info();
 	struct task_struct *tsk = current;
 	int usig = sig;
 	int ret;
 
-	/*
-	 * If we were from a system call, check for system call restarting...
-	 */
-	if (syscall) {
-		switch (regs->ARM_r0) {
-		case -ERESTART_RESTARTBLOCK:
-		case -ERESTARTNOHAND:
-			regs->ARM_r0 = -EINTR;
-			break;
-		case -ERESTARTSYS:
-			if (!(ka->sa.sa_flags & SA_RESTART)) {
-				regs->ARM_r0 = -EINTR;
-				break;
-			}
-			/* fallthrough */
-		case -ERESTARTNOINTR:
-			setup_syscall_restart(regs);
-		}
-	}
-
 	/*
 	 * translate the signal
 	 */
@@ -685,6 +659,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
  */
 static void do_signal(struct pt_regs *regs, int syscall)
 {
+	unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
 	struct k_sigaction ka;
 	siginfo_t info;
 	int signr;
@@ -698,18 +673,61 @@ static void do_signal(struct pt_regs *regs, int syscall)
 	if (!user_mode(regs))
 		return;
 
+	/*
+	 * If we were from a system call, check for system call restarting...
+	 */
+	if (syscall) {
+		continue_addr = regs->ARM_pc;
+		restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4);
+		retval = regs->ARM_r0;
+
+		/*
+		 * Prepare for system call restart.  We do this here so that a
+		 * debugger will see the already changed PSW.
+		 */
+		switch (retval) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			regs->ARM_r0 = regs->ARM_ORIG_r0;
+			regs->ARM_pc = restart_addr;
+			break;
+		case -ERESTART_RESTARTBLOCK:
+			regs->ARM_r0 = -EINTR;
+			break;
+		}
+	}
+
 	if (try_to_freeze())
 		goto no_signal;
 
+	/*
+	 * Get the signal to deliver.  When running under ptrace, at this
+	 * point the debugger may change all our registers ...
+	 */
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
 		sigset_t *oldset;
 
+		/*
+		 * Depending on the signal settings we may need to revert the
+		 * decision to restart the system call.  But skip this if a
+		 * debugger has chosen to restart at a different PC.
+		 */
+		if (regs->ARM_pc == restart_addr) {
+			if (retval == -ERESTARTNOHAND
+			    || (retval == -ERESTARTSYS
+				&& !(ka.sa.sa_flags & SA_RESTART))) {
+				regs->ARM_r0 = -EINTR;
+				regs->ARM_pc = continue_addr;
+			}
+		}
+
 		if (test_thread_flag(TIF_RESTORE_SIGMASK))
 			oldset = &current->saved_sigmask;
 		else
 			oldset = &current->blocked;
-		if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
 			/*
 			 * A signal was successfully delivered; the saved
 			 * sigmask will have been stored in the signal frame,
@@ -723,11 +741,14 @@ static void do_signal(struct pt_regs *regs, int syscall)
 	}
 
  no_signal:
-	/*
-	 * No signal to deliver to the process - restart the syscall.
-	 */
 	if (syscall) {
-		if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
+		/*
+		 * Handle restarting a different system call.  As above,
+		 * if a debugger has chosen to restart at a different PC,
+		 * ignore the restart.
+		 */
+		if (retval == -ERESTART_RESTARTBLOCK
+		    && regs->ARM_pc == continue_addr) {
 			if (thumb_mode(regs)) {
 				regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
 				regs->ARM_pc -= 2;
@@ -750,11 +771,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
 #endif
 			}
 		}
-		if (regs->ARM_r0 == -ERESTARTNOHAND ||
-		    regs->ARM_r0 == -ERESTARTSYS ||
-		    regs->ARM_r0 == -ERESTARTNOINTR) {
-			setup_syscall_restart(regs);
-		}
 
 		/* If there's no signal to deliver, we just put the saved sigmask
 		 * back.

arch/arm/kernel/smp.c

@@ -479,7 +479,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode,
 {
 }
 
-static void broadcast_timer_setup(struct clock_event_device *evt)
+static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
 {
 	evt->name	= "dummy_timer";
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |

arch/arm/kernel/sys_oabi-compat.c

@@ -311,7 +311,7 @@ asmlinkage long sys_oabi_semtimedop(int semid,
 	long err;
 	int i;
 
-	if (nsops < 1)
+	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
 	sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
 	if (!sops)

arch/arm/mach-at91/Kconfig

@@ -83,6 +83,7 @@ config ARCH_AT91CAP9
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 config ARCH_AT572D940HF
 	bool "AT572D940HF"

arch/arm/mach-at91/board-eb01.c

@@ -30,6 +30,11 @@
 #include <mach/board.h>
 #include "generic.h"
 
+static void __init at91eb01_init_irq(void)
+{
+	at91x40_init_interrupts(NULL);
+}
+
 static void __init at91eb01_map_io(void)
 {
 	at91x40_initialize(40000000);
@@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void)
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
 	.timer		= &at91x40_timer,
-	.init_irq	= at91x40_init_interrupts,
+	.init_irq	= at91eb01_init_irq,
 	.map_io		= at91eb01_map_io,
 MACHINE_END
 

arch/arm/mach-at91/include/mach/cpu.h

@@ -27,6 +27,7 @@
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
 #define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
 #define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
+#define ARCH_ID_AT91SAM9X5	0x819a05a0
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void)
 #define ARCH_EXID_AT91SAM9G46	0x00000003
 #define ARCH_EXID_AT91SAM9G45	0x00000004
 
+#define ARCH_EXID_AT91SAM9G15	0x00000000
+#define ARCH_EXID_AT91SAM9G35	0x00000001
+#define ARCH_EXID_AT91SAM9X35	0x00000002
+#define ARCH_EXID_AT91SAM9G25	0x00000003
+#define ARCH_EXID_AT91SAM9X25	0x00000004
+
 static inline unsigned long at91_exid_identify(void)
 {
 	return at91_sys_read(AT91_DBGU_EXID);
@@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9m11()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9X5
+#define cpu_is_at91sam9x5()	(at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
+#define cpu_is_at91sam9g25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9x25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
+#else
+#define cpu_is_at91sam9x5()	(0)
+#define cpu_is_at91sam9g15()	(0)
+#define cpu_is_at91sam9g35()	(0)
+#define cpu_is_at91sam9x35()	(0)
+#define cpu_is_at91sam9g25()	(0)
+#define cpu_is_at91sam9x25()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
 #define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)

arch/arm/mach-davinci/Kconfig

@@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM
 	depends on ARCH_DAVINCI_DM644x
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
@@ -72,6 +73,7 @@ config MACH_SFFSDR
 	depends on ARCH_DAVINCI_DM644x
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
@@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM
 	select MACH_DAVINCI_DM6467TEVM
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
@@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM
 	depends on ARCH_DAVINCI_DM365
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Configure this option to specify whether the board used
 	  for development is a DM365 EVM
@@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM
 	select GPIO_PCF857X
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 
@@ -205,6 +210,7 @@ config MACH_MITYOMAPL138
 	depends on ARCH_DAVINCI_DA850
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at

arch/arm/mach-davinci/board-mityomapl138.c

@@ -29,7 +29,7 @@
 #include <mach/mux.h>
 #include <mach/spi.h>
 
-#define MITYOMAPL138_PHY_ID		"0:03"
+#define MITYOMAPL138_PHY_ID		""
 
 #define FACTORY_CONFIG_MAGIC	0x012C0138
 #define FACTORY_CONFIG_VERSION	0x00010001
@@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = {
 
 static struct platform_device mityomapl138_nandflash_device = {
 	.name		= "davinci_nand",
-	.id		= 0,
+	.id		= 1,
 	.dev		= {
 		.platform_data	= &mityomapl138_nandflash_data,
 	},

arch/arm/mach-davinci/devices-da8xx.c

@@ -39,7 +39,8 @@
 #define DA8XX_GPIO_BASE			0x01e26000
 #define DA8XX_I2C1_BASE			0x01e28000
 #define DA8XX_SPI0_BASE			0x01c41000
-#define DA8XX_SPI1_BASE			0x01f0e000
+#define DA830_SPI1_BASE			0x01e12000
+#define DA850_SPI1_BASE			0x01f0e000
 
 #define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
 #define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
@@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = {
 
 static struct resource da8xx_spi1_resources[] = {
 	[0] = {
-		.start	= DA8XX_SPI1_BASE,
-		.end	= DA8XX_SPI1_BASE + SZ_4K - 1,
+		.start	= DA830_SPI1_BASE,
+		.end	= DA830_SPI1_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
 
 	da8xx_spi_pdata[instance].num_chipselect = len;
 
+	if (instance == 1 && cpu_is_davinci_da850()) {
+		da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
+		da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
+	}
+
 	return platform_device_register(&da8xx_spi_device[instance]);
 }

arch/arm/mach-davinci/dm355.c

@@ -314,7 +314,7 @@ static struct clk timer2_clk = {
 	.name = "timer2",
 	.parent = &pll1_aux_clk,
 	.lpsc = DAVINCI_LPSC_TIMER2,
-	.usecount = 1,              /* REVISIT: why can't' this be disabled? */
+	.usecount = 1,              /* REVISIT: why can't this be disabled? */
 };
 
 static struct clk timer3_clk = {

arch/arm/mach-davinci/dm644x.c

@@ -274,7 +274,7 @@ static struct clk timer2_clk = {
 	.name = "timer2",
 	.parent = &pll1_aux_clk,
 	.lpsc = DAVINCI_LPSC_TIMER2,
-	.usecount = 1,              /* REVISIT: why can't' this be disabled? */
+	.usecount = 1,              /* REVISIT: why can't this be disabled? */
 };
 
 static struct clk_lookup dm644x_clks[] = {

arch/arm/mach-davinci/include/mach/debug-macro.S

@@ -24,6 +24,9 @@
 
 #define UART_SHIFT	2
 
+#define davinci_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define davinci_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
 		.pushsection .data
 davinci_uart_phys:	.word	0
 davinci_uart_virt:	.word	0
@@ -34,7 +37,7 @@ davinci_uart_virt:	.word	0
 		/* Use davinci_uart_phys/virt if already configured */
 10:		mrc	p15, 0, \rp, c1, c0
 		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =__virt_to_phys(davinci_uart_phys)
+		ldreq	\rp, =davinci_uart_v2p(davinci_uart_phys)
 		ldrne	\rp, =davinci_uart_phys
 		add	\rv, \rp, #4		@ davinci_uart_virt
 		ldr	\rp, [\rp, #0]
@@ -48,18 +51,18 @@ davinci_uart_virt:	.word	0
 		tst	\rp, #1			@ MMU enabled?
 
 		/* Copy uart phys address from decompressor uart info */
-		ldreq	\rv, =__virt_to_phys(davinci_uart_phys)
+		ldreq	\rv, =davinci_uart_v2p(davinci_uart_phys)
 		ldrne	\rv, =davinci_uart_phys
 		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
 		ldr	\rp, [\rp, #0]
 		str	\rp, [\rv]
 
 		/* Copy uart virt address from decompressor uart info */
-		ldreq	\rv, =__virt_to_phys(davinci_uart_virt)
+		ldreq	\rv, =davinci_uart_v2p(davinci_uart_virt)
 		ldrne	\rv, =davinci_uart_virt
 		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
 		ldr	\rp, [\rp, #4]
 		str	\rp, [\rv]
 

arch/arm/mach-davinci/include/mach/serial.h

@@ -22,7 +22,7 @@
  *
  * This area sits just below the page tables (see arch/arm/kernel/head.S).
  */
-#define DAVINCI_UART_INFO	(PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO	(PLAT_PHYS_OFFSET + 0x3ff8)
 
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)

arch/arm/mach-mx3/mach-vpr200.c

@@ -257,11 +257,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
 };
 
+static int vpr200_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id,
+			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
+}
+
 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.portsc		= MXC_EHCI_MODE_SERIAL,
-	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY,
+	.init = vpr200_usbh_init,
+	.portsc = MXC_EHCI_MODE_SERIAL,
 };
 
 static struct platform_device *devices[] __initdata = {

arch/arm/mach-mx5/board-mx53_loco.c

@@ -193,7 +193,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	.wakeup		= wake,					\
 }
 
-static const struct gpio_keys_button loco_buttons[] __initconst = {
+static struct gpio_keys_button loco_buttons[] = {
 	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
 	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
 	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),

arch/arm/mach-mxs/clock-mx28.c

@@ -295,11 +295,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	unsigned long diff, parent_rate, calc_rate;			\
 	int i;								\
 									\
-	parent_rate = clk_get_rate(clk->parent);			\
 	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
 	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
 									\
 	if (clk->parent == &ref_xtal_clk) {				\
+		parent_rate = clk_get_rate(clk->parent);		\
 		div = DIV_ROUND_UP(parent_rate, rate);			\
 		if (clk == &cpu_clk) {					\
 			div_max = BM_CLKCTRL_CPU_DIV_XTAL >>		\
@@ -309,6 +309,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 		if (div == 0 || div > div_max)				\
 			return -EINVAL;					\
 	} else {							\
+		/*							\
+		 * hack alert: this block modifies clk->parent, too,	\
+		 * so the base to use it the grand parent.		\
+		 */							\
+		parent_rate = clk_get_rate(clk->parent->parent);	\
 		rate >>= PARENT_RATE_SHIFT;				\
 		parent_rate >>= PARENT_RATE_SHIFT;			\
 		diff = parent_rate;					\

arch/arm/mach-omap2/Makefile

@@ -68,7 +68,7 @@ obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
-AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a
+AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 ifeq ($(CONFIG_PM_VERBOSE),y)
 CFLAGS_pm_bus.o				+= -DDEBUG

arch/arm/mach-omap2/board-rx51.c

@@ -141,14 +141,19 @@ static void __init rx51_init(void)
 static void __init rx51_map_io(void)
 {
 	omap2_set_globals_3xxx();
-	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }
 
+static void __init rx51_reserve(void)
+{
+	rx51_video_mem_init();
+	omap_reserve();
+}
+
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.boot_params	= 0x80000100,
-	.reserve	= omap_reserve,
+	.reserve	= rx51_reserve,
 	.map_io		= rx51_map_io,
 	.init_early	= rx51_init_early,
 	.init_irq	= omap_init_irq,

arch/arm/mach-omap2/clkt34xx_dpll3m2.c

@@ -115,6 +115,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  0, 0, 0, 0);
+	clk->rate = rate;
 
 	return 0;
 }

arch/arm/mach-omap2/clock44xx_data.c

@@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"dsp_fck",			&dsp_fck,	CK_443X),
 	CLK("omapdss_dss",	"sys_clk",			&dss_sys_clk,	CK_443X),
 	CLK("omapdss_dss",	"tv_clk",			&dss_tv_clk,	CK_443X),
-	CLK("omapdss_dss",	"dss_clk",			&dss_dss_clk,	CK_443X),
 	CLK("omapdss_dss",	"video_clk",			&dss_48mhz_clk,	CK_443X),
-	CLK("omapdss_dss",	"fck",				&dss_fck,	CK_443X),
-	/*
-	 * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility
-	 * with OMAP2/3.
-	 */
-	CLK("omapdss_dss",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omapdss_dss",	"fck",				&dss_dss_clk,	CK_443X),
+	CLK("omapdss_dss",	"ick",				&dss_fck,	CK_443X),
 	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
 	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
 	CLK(NULL,	"emif2_fck",			&emif2_fck,	CK_443X),

arch/arm/mach-omap2/cm2xxx_3xxx.c

@@ -247,6 +247,7 @@ struct omap3_cm_regs {
 	u32 per_cm_clksel;
 	u32 emu_cm_clksel;
 	u32 emu_cm_clkstctrl;
+	u32 pll_cm_autoidle;
 	u32 pll_cm_autoidle2;
 	u32 pll_cm_clksel4;
 	u32 pll_cm_clksel5;
@@ -319,6 +320,15 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
 	cm_context.emu_cm_clkstctrl =
 		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+	 * In this case, even though this register has been saved in
+	 * scratchpad contents, we need to restore AUTO_PERIPH_DPLL
+	 * by ourselves. So, we need to save it anyway.
+	 */
+	cm_context.pll_cm_autoidle =
+		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
 	cm_context.pll_cm_autoidle2 =
 		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
 	cm_context.pll_cm_clksel4 =
@@ -441,6 +451,13 @@ void omap3_cm_restore_context(void)
 			       CM_CLKSEL1);
 	omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
 			       OMAP2_CM_CLKSTCTRL);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+	 * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves.
+	 */
+	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD,
+			       CM_AUTOIDLE);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
 			       CM_AUTOIDLE2);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,

arch/arm/mach-omap2/control.c

@@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void)
 			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
 	prcm_block_contents.cm_clken_pll =
 			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
+	 * Then,  in anycase, clear these bits to avoid extra latencies.
+	 */
 	prcm_block_contents.cm_autoidle_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+			omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
+			~OMAP3430_AUTO_PERIPH_DPLL_MASK;
 	prcm_block_contents.cm_clksel1_pll =
 			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
 	prcm_block_contents.cm_clksel2_pll =

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
@@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
@@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio5_irqs),
 	.main_clk	= "gpio5_fck",
@@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio1_irqs),
 	.main_clk	= "gpio1_ick",
@@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio2_irqs),
 	.main_clk	= "gpio2_ick",
@@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio3_irqs),
 	.main_clk	= "gpio3_ick",
@@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio4_irqs),
 	.main_clk	= "gpio4_ick",
@@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio5_irqs),
 	.main_clk	= "gpio5_ick",
@@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 	.name		= "gpio6",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio6_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio6_irqs),
 	.main_clk	= "gpio6_ick",
@@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
 static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x4a056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x4a056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

arch/arm/mach-omap2/omap_l3_smx.c

@@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
 		/* No timeout error for debug sources */
 	}
 
-	base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source)));
-
 	/* identify the error source */
 	for (err_source = 0; !(status & (1 << err_source)); err_source++)
 									;
+
+	base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
 	error = omap3_l3_readll(base, L3_ERROR_LOG);
 
 	if (error) {

arch/arm/mach-omap2/pm.c

@@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void)
 	if (cpu_is_omap44xx()) {
 		_init_omap_device("l3_main_1", &l3_dev);
 		_init_omap_device("dsp", &dsp_dev);
+		_init_omap_device("iva", &iva_dev);
 	} else {
 		_init_omap_device("l3_main", &l3_dev);
 	}

arch/arm/mach-omap2/voltage.c

@@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
 	sys_clk_speed /= 1000;
 
 	/* Generic voltage parameters */
-	vdd->curr_volt = 1200000;
 	vdd->volt_scale = vp_forceupdate_scale_voltage;
 	vdd->vp_enabled = false;
 

arch/arm/mach-pxa/hx4700.c

@@ -711,7 +711,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
 static struct regulator_init_data bq24022_init_data = {
 	.constraints = {
 		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
 	.consumer_supplies      = bq24022_consumers,

arch/arm/mach-pxa/magician.c

@@ -599,7 +599,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
 static struct regulator_init_data bq24022_init_data = {
 	.constraints = {
 		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
 	.consumer_supplies      = bq24022_consumers,

arch/arm/mach-realview/include/mach/barriers.h

@@ -4,5 +4,5 @@
  * operation to deadlock the system.
  */
 #define mb()		dsb()
-#define rmb()		dmb()
+#define rmb()		dsb()
 #define wmb()		mb()

arch/arm/mach-tegra/include/mach/barriers.h

@@ -23,7 +23,7 @@
 
 #include <asm/outercache.h>
 
-#define rmb()		dmb()
+#define rmb()		dsb()
 #define wmb()		do { dsb(); outer_sync(); } while (0)
 #define mb()		wmb()
 

arch/arm/mm/init.c

@@ -392,7 +392,7 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 	 * Convert start_pfn/end_pfn to a struct page pointer.
 	 */
 	start_pg = pfn_to_page(start_pfn - 1) + 1;
-	end_pg = pfn_to_page(end_pfn);
+	end_pg = pfn_to_page(end_pfn - 1) + 1;
 
 	/*
 	 * Convert to physical addresses, and
@@ -426,6 +426,14 @@ static void __init free_unused_memmap(struct meminfo *mi)
 
 		bank_start = bank_pfn_start(bank);
 
+#ifdef CONFIG_SPARSEMEM
+		/*
+		 * Take care not to free memmap entries that don't exist
+		 * due to SPARSEMEM sections which aren't present.
+		 */
+		bank_start = min(bank_start,
+				 ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
 		/*
 		 * If we had a previous bank, and there is a space
 		 * between the current bank and the previous, free it.
@@ -440,6 +448,12 @@ static void __init free_unused_memmap(struct meminfo *mi)
 		 */
 		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
 	}
+
+#ifdef CONFIG_SPARSEMEM
+	if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
+		free_memmap(prev_bank_end,
+			    ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
 }
 
 static void __init free_highpages(void)

arch/arm/mm/proc-xscale.S

@@ -395,7 +395,7 @@ ENTRY(xscale_dma_a0_map_area)
 	teq	r2, #DMA_TO_DEVICE
 	beq	xscale_dma_clean_range
 	b	xscale_dma_flush_range
-ENDPROC(xscsale_dma_a0_map_area)
+ENDPROC(xscale_dma_a0_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)

arch/arm/plat-mxc/gpio.c

@@ -295,6 +295,12 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 {
 	int i, j;
@@ -311,6 +317,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		__raw_writel(~0, port[i].base + GPIO_ISR);
 		for (j = port[i].virtual_irq_start;
 			j < port[i].virtual_irq_start + 32; j++) {
+			irq_set_lockdep_class(j, &gpio_lock_class);
 			irq_set_chip_and_handler(j, &gpio_irq_chip,
 						 handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);

arch/arm/plat-mxc/ssi-fiq.S

@@ -124,6 +124,8 @@ imx_ssi_fiq_start:
 1:
 		@ return from FIQ
 		subs	pc, lr, #4
+
+		.align
 imx_ssi_fiq_base:
 		.word 0x0
 imx_ssi_fiq_rx_buffer:

arch/arm/plat-omap/iommu.c

@@ -793,6 +793,8 @@ static irqreturn_t iommu_fault_handler(int irq, void *data)
 	clk_enable(obj->clk);
 	errs = iommu_report_fault(obj, &da);
 	clk_disable(obj->clk);
+	if (errs == 0)
+		return IRQ_HANDLED;
 
 	/* Fault callback or TLB/PTE Dynamic loading */
 	if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv))

arch/m68k/mm/motorola.c

@@ -300,6 +300,8 @@ void __init paging_init(void)
 		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
 		free_area_init_node(i, zones_size,
 				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
+		if (node_present_pages(i))
+			node_set_state(i, N_NORMAL_MEMORY);
 	}
 }
 

arch/mips/Kconfig

@@ -997,9 +997,6 @@ config IRQ_GT641XX
 config IRQ_GIC
 	bool
 
-config IRQ_CPU_OCTEON
-	bool
-
 config MIPS_BOARDS_GEN
 	bool
 
@@ -1359,8 +1356,6 @@ config CPU_SB1
 config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
 	depends on SYS_HAS_CPU_CAVIUM_OCTEON
-	select IRQ_CPU
-	select IRQ_CPU_OCTEON
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_SMP

arch/mips/alchemy/devboards/db1x00/board_setup.c

@@ -127,13 +127,10 @@ const char *get_system_type(void)
 void __init board_setup(void)
 {
 	unsigned long bcsr1, bcsr2;
-	u32 pin_func;
 
 	bcsr1 = DB1000_BCSR_PHYS_ADDR;
 	bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
 
-	pin_func = 0;
-
 #ifdef CONFIG_MIPS_DB1000
 	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
 #endif
@@ -164,12 +161,16 @@ void __init board_setup(void)
 	/* Not valid for Au1550 */
 #if defined(CONFIG_IRDA) && \
    (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
-	/* Set IRFIRSEL instead of GPIO15 */
-	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
-	au_writel(pin_func, SYS_PINFUNC);
-	/* Power off until the driver is in use */
-	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
-				BCSR_RESETS_IRDA_MODE_OFF);
+	{
+		u32 pin_func;
+
+		/* Set IRFIRSEL instead of GPIO15 */
+		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
+		au_writel(pin_func, SYS_PINFUNC);
+		/* Power off until the driver is in use */
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+			 BCSR_RESETS_IRDA_MODE_OFF);
+	}
 #endif
 	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
 
@@ -177,31 +178,35 @@ void __init board_setup(void)
 	alchemy_gpio1_input_enable();
 
 #ifdef CONFIG_MIPS_MIRAGE
-	/* GPIO[20] is output */
-	alchemy_gpio_direction_output(20, 0);
+	{
+		u32 pin_func;
 
-	/* Set GPIO[210:208] instead of SSI_0 */
-	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
+		/* GPIO[20] is output */
+		alchemy_gpio_direction_output(20, 0);
 
-	/* Set GPIO[215:211] for LEDs */
-	pin_func |= 5 << 2;
+		/* Set GPIO[210:208] instead of SSI_0 */
+		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
 
-	/* Set GPIO[214:213] for more LEDs */
-	pin_func |= 5 << 12;
+		/* Set GPIO[215:211] for LEDs */
+		pin_func |= 5 << 2;
 
-	/* Set GPIO[207:200] instead of PCMCIA/LCD */
-	pin_func |= SYS_PF_LCD | SYS_PF_PC;
-	au_writel(pin_func, SYS_PINFUNC);
+		/* Set GPIO[214:213] for more LEDs */
+		pin_func |= 5 << 12;
 
-	/*
-	 * Enable speaker amplifier.  This should
-	 * be part of the audio driver.
-	 */
-	alchemy_gpio_direction_output(209, 1);
+		/* Set GPIO[207:200] instead of PCMCIA/LCD */
+		pin_func |= SYS_PF_LCD | SYS_PF_PC;
+		au_writel(pin_func, SYS_PINFUNC);
 
-	pm_power_off = mirage_power_off;
-	_machine_halt = mirage_power_off;
-	_machine_restart = (void(*)(char *))mips_softreset;
+		/*
+		 * Enable speaker amplifier.  This should
+		 * be part of the audio driver.
+		 */
+		alchemy_gpio_direction_output(209, 1);
+
+		pm_power_off = mirage_power_off;
+		_machine_halt = mirage_power_off;
+		_machine_restart = (void(*)(char *))mips_softreset;
+	}
 #endif
 
 #ifdef CONFIG_MIPS_BOSPORUS

arch/mips/alchemy/xxs1500/init.c

@@ -51,10 +51,9 @@ void __init prom_init(void)
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
+	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
 		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
+
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 

arch/mips/ar7/gpio.c

@@ -325,9 +325,7 @@ int __init ar7_gpio_init(void)
 		size = 0x1f;
 	}
 
-	gpch->regs = ioremap_nocache(AR7_REGS_GPIO,
-					AR7_REGS_GPIO + 0x10);
-
+	gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size);
 	if (!gpch->regs) {
 		printk(KERN_ERR "%s: failed to ioremap regs\n",
 					gpch->chip.label);

arch/mips/boot/compressed/calc_vmlinuz_load_addr.c

@@ -16,8 +16,8 @@
 
 int main(int argc, char *argv[])
 {
+	unsigned long long vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
 	struct stat sb;
-	uint64_t vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
 
 	if (argc != 3) {
 		fprintf(stderr, "Usage: %s <pathname> <vmlinux_load_addr>\n",

arch/mips/cavium-octeon/Kconfig

@@ -1,11 +1,7 @@
-config CAVIUM_OCTEON_SPECIFIC_OPTIONS
-	bool "Enable Octeon specific options"
-	depends on CPU_CAVIUM_OCTEON
-	default "y"
+if CPU_CAVIUM_OCTEON
 
 config CAVIUM_CN63XXP1
 	bool "Enable CN63XXP1 errata worarounds"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	default "n"
 	help
 	  The CN63XXP1 chip requires build time workarounds to
@@ -16,7 +12,6 @@ config CAVIUM_CN63XXP1
 
 config CAVIUM_OCTEON_2ND_KERNEL
 	bool "Build the kernel to be used as a 2nd kernel on the same chip"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	default "n"
 	help
 	  This option configures this kernel to be linked at a different
@@ -26,7 +21,6 @@ config CAVIUM_OCTEON_2ND_KERNEL
 
 config CAVIUM_OCTEON_HW_FIX_UNALIGNED
 	bool "Enable hardware fixups of unaligned loads and stores"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	default "y"
 	help
 	  Configure the Octeon hardware to automatically fix unaligned loads
@@ -38,7 +32,6 @@ config CAVIUM_OCTEON_HW_FIX_UNALIGNED
 
 config CAVIUM_OCTEON_CVMSEG_SIZE
 	int "Number of L1 cache lines reserved for CVMSEG memory"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	range 0 54
 	default 1
 	help
@@ -50,7 +43,6 @@ config CAVIUM_OCTEON_CVMSEG_SIZE
 
 config CAVIUM_OCTEON_LOCK_L2
 	bool "Lock often used kernel code in the L2"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	default "y"
 	help
 	  Enable locking parts of the kernel into the L2 cache.
@@ -93,7 +85,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_STATIC
-	depends on CPU_CAVIUM_OCTEON
 
 config CAVIUM_OCTEON_HELPER
 	def_bool y
@@ -107,6 +98,8 @@ config NEED_SG_DMA_LENGTH
 
 config SWIOTLB
 	def_bool y
-	depends on CPU_CAVIUM_OCTEON
 	select IOMMU_HELPER
 	select NEED_SG_DMA_LENGTH
+
+
+endif # CPU_CAVIUM_OCTEON

arch/mips/include/asm/cache.h

@@ -17,6 +17,6 @@
 #define SMP_CACHE_SHIFT		L1_CACHE_SHIFT
 #define SMP_CACHE_BYTES		L1_CACHE_BYTES
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #endif /* _ASM_CACHE_H */

arch/mips/include/asm/cevt-r4k.h

@@ -14,6 +14,9 @@
 #ifndef __ASM_CEVT_R4K_H
 #define __ASM_CEVT_R4K_H
 
+#include <linux/clockchips.h>
+#include <asm/time.h>
+
 DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 
 void mips_event_handler(struct clock_event_device *dev);

arch/mips/include/asm/dma-mapping.h

@@ -5,7 +5,9 @@
 #include <asm/cache.h>
 #include <asm-generic/dma-coherent.h>
 
+#ifndef CONFIG_SGI_IP27	/* Kludge to fix 2.6.39 build for IP27 */
 #include <dma-coherence.h>
+#endif
 
 extern struct dma_map_ops *mips_dma_map_ops;
 

arch/mips/include/asm/hugetlb.h

@@ -70,6 +70,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
 					 unsigned long addr, pte_t *ptep)
 {
+	flush_tlb_mm(vma->vm_mm);
 }
 
 static inline int huge_pte_none(pte_t pte)

arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h

@@ -88,7 +88,7 @@ struct bcm_tag {
 	char kernel_crc[CRC_LEN];
 	/* 228-235: Unused at present */
 	char reserved1[8];
-	/* 236-239: CRC32 of header excluding tagVersion */
+	/* 236-239: CRC32 of header excluding last 20 bytes */
 	char header_crc[CRC_LEN];
 	/* 240-255: Unused at present */
 	char reserved2[16];

arch/mips/jazz/jazzdma.c

@@ -211,7 +211,7 @@ EXPORT_SYMBOL(vdma_free);
  */
 int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size)
 {
-	int first, pages, npages;
+	int first, pages;
 
 	if (laddr > 0xffffff) {
 		if (vdma_debug)
@@ -228,8 +228,7 @@ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size)
 		return -EINVAL;	/* invalid physical address */
 	}
 
-	npages = pages =
-	    (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1;
+	pages = (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1;
 	first = laddr >> 12;
 	if (vdma_debug)
 		printk("vdma_remap: first=%x, pages=%x\n", first, pages);

arch/mips/jz4740/dma.c

@@ -242,9 +242,7 @@ EXPORT_SYMBOL_GPL(jz4740_dma_get_residue);
 
 static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma)
 {
-	uint32_t status;
-
-	status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
+	(void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
 
 	jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
 		JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE);

arch/mips/jz4740/time.c

@@ -89,7 +89,7 @@ static int jz4740_clockevent_set_next(unsigned long evt,
 
 static struct clock_event_device jz4740_clockevent = {
 	.name = "jz4740-timer",
-	.features = CLOCK_EVT_FEAT_PERIODIC,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_next_event = jz4740_clockevent_set_next,
 	.set_mode = jz4740_clockevent_set_mode,
 	.rating = 200,

arch/mips/jz4740/timer.c

@@ -27,11 +27,13 @@ void jz4740_timer_enable_watchdog(void)
 {
 	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
 }
+EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog);
 
 void jz4740_timer_disable_watchdog(void)
 {
 	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
 }
+EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog);
 
 void __init jz4740_timer_init(void)
 {

arch/mips/kernel/ftrace.c

@@ -23,6 +23,7 @@
 
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
 #define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
+#define JUMP_RANGE_MASK ((1UL << 28) - 1)
 
 #define INSN_NOP 0x00000000	/* nop */
 #define INSN_JAL(addr)	\
@@ -44,12 +45,12 @@ static inline void ftrace_dyn_arch_init_insns(void)
 
 	/* jal (ftrace_caller + 8), jump over the first two instruction */
 	buf = (u32 *)&insn_jal_ftrace_caller;
-	uasm_i_jal(&buf, (FTRACE_ADDR + 8));
+	uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK);
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	/* j ftrace_graph_caller */
 	buf = (u32 *)&insn_j_ftrace_graph_caller;
-	uasm_i_j(&buf, (unsigned long)ftrace_graph_caller);
+	uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK);
 #endif
 }
 

arch/mips/kernel/ptrace.c

@@ -540,8 +540,8 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 		secure_computing(regs->regs[2]);
 
 	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
-		                   regs->regs[2]);
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]),
+		                   -regs->regs[2]);
 
 	if (!(current->ptrace & PT_PTRACED))
 		goto out;

arch/mips/kernel/scall32-o32.S

@@ -565,7 +565,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_ioprio_get		2	/* 4315 */
 	sys	sys_utimensat		4
 	sys	sys_signalfd		3
-	sys	sys_ni_syscall		0
+	sys	sys_ni_syscall		0	/* was timerfd */
 	sys	sys_eventfd		1
 	sys	sys_fallocate		6	/* 4320 */
 	sys	sys_timerfd_create	2

arch/mips/kernel/scall64-64.S

@@ -404,7 +404,7 @@ sys_call_table:
 	PTR	sys_ioprio_get
 	PTR	sys_utimensat			/* 5275 */
 	PTR	sys_signalfd
-	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was timerfd */
 	PTR	sys_eventfd
 	PTR	sys_fallocate
 	PTR	sys_timerfd_create		/* 5280 */

arch/mips/kernel/scall64-n32.S

@@ -403,7 +403,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_ioprio_get
 	PTR	compat_sys_utimensat
 	PTR	compat_sys_signalfd		/* 6280 */
-	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was timerfd */
 	PTR	sys_eventfd
 	PTR	sys_fallocate
 	PTR	sys_timerfd_create

arch/mips/kernel/scall64-o32.S

@@ -522,7 +522,7 @@ sys_call_table:
 	PTR	sys_ioprio_get			/* 4315 */
 	PTR	compat_sys_utimensat
 	PTR	compat_sys_signalfd
-	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was timerfd */
 	PTR	sys_eventfd
 	PTR	sys32_fallocate			/* 4320 */
 	PTR	sys_timerfd_create

arch/mips/kernel/traps.c

@@ -374,7 +374,8 @@ void __noreturn die(const char *str, struct pt_regs *regs)
 	unsigned long dvpret = dvpe();
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV);
+	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
+		sig = 0;
 
 	console_verbose();
 	spin_lock_irq(&die_lock);
@@ -383,9 +384,6 @@ void __noreturn die(const char *str, struct pt_regs *regs)
 	mips_mt_regdump(dvpret);
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
-		sig = 0;
-
 	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
 	add_taint(TAINT_DIE);

arch/mips/kernel/vmlinux.lds.S

@@ -74,6 +74,7 @@ SECTIONS
 		INIT_TASK_DATA(PAGE_SIZE)
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+		READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
 		DATA_DATA
 		CONSTRUCTORS
 	}

arch/mips/loongson/common/env.c

@@ -29,9 +29,10 @@ unsigned long memsize, highmemsize;
 
 #define parse_even_earlier(res, option, p)				\
 do {									\
-	int ret;							\
+	unsigned int tmp __maybe_unused;				\
+									\
 	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-		ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
+		tmp = strict_strtol((char *)p + strlen(option"="), 10, &res); \
 } while (0)
 
 void __init prom_init_env(void)

arch/mips/mm/c-r4k.c

@@ -1075,7 +1075,6 @@ static int __cpuinit probe_scache(void)
 	unsigned long flags, addr, begin, end, pow2;
 	unsigned int config = read_c0_config();
 	struct cpuinfo_mips *c = &current_cpu_data;
-	int tmp;
 
 	if (config & CONF_SC)
 		return 0;
@@ -1108,7 +1107,6 @@ static int __cpuinit probe_scache(void)
 
 	/* Now search for the wrap around point. */
 	pow2 = (128 * 1024);
-	tmp = 0;
 	for (addr = begin + (128 * 1024); addr < end; addr = begin + pow2) {
 		cache_op(Index_Load_Tag_SD, addr);
 		__asm__ __volatile__("nop; nop; nop; nop;"); /* hazard... */

arch/mips/mm/tlbex.c

@@ -1151,8 +1151,8 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 	struct uasm_reloc *r = relocs;
 	u32 *f;
 	unsigned int final_len;
-	struct mips_huge_tlb_info htlb_info;
-	enum vmalloc64_mode vmalloc_mode;
+	struct mips_huge_tlb_info htlb_info __maybe_unused;
+	enum vmalloc64_mode vmalloc_mode __maybe_unused;
 
 	memset(tlb_handler, 0, sizeof(tlb_handler));
 	memset(labels, 0, sizeof(labels));

arch/mips/mti-malta/malta-init.c

@@ -193,8 +193,6 @@ extern struct plat_smp_ops msmtc_smp_ops;
 
 void __init prom_init(void)
 {
-	int result;
-
 	prom_argc = fw_arg0;
 	_prom_argv = (int *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
@@ -360,20 +358,14 @@ void __init prom_init(void)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	console_config();
 #endif
-	/* Early detection of CMP support */
-	result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
-
 #ifdef CONFIG_MIPS_CMP
-	if (result)
+	/* Early detection of CMP support */
+	if (gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ))
 		register_smp_ops(&cmp_smp_ops);
+	else
 #endif
 #ifdef CONFIG_MIPS_MT_SMP
-#ifdef CONFIG_MIPS_CMP
-	if (!result)
 		register_smp_ops(&vsmp_smp_ops);
-#else
-	register_smp_ops(&vsmp_smp_ops);
-#endif
 #endif
 #ifdef CONFIG_MIPS_MT_SMTC
 	register_smp_ops(&msmtc_smp_ops);

arch/mips/mti-malta/malta-int.c

@@ -56,7 +56,6 @@ static DEFINE_RAW_SPINLOCK(mips_irq_lock);
 static inline int mips_pcibios_iack(void)
 {
 	int irq;
-	u32 dummy;
 
 	/*
 	 * Determine highest priority pending interrupt by performing
@@ -83,7 +82,7 @@ static inline int mips_pcibios_iack(void)
 		BONITO_PCIMAP_CFG = 0x20000;
 
 		/* Flush Bonito register block */
-		dummy = BONITO_PCIMAP_CFG;
+		(void) BONITO_PCIMAP_CFG;
 		iob();    /* sync */
 
 		irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg);

arch/mips/pmc-sierra/msp71xx/msp_irq_per.c

@@ -97,7 +97,7 @@ static int msp_per_irq_set_affinity(struct irq_data *d,
 
 static struct irq_chip msp_per_irq_controller = {
 	.name = "MSP_PER",
-	.irq_enable = unmask_per_irq.
+	.irq_enable = unmask_per_irq,
 	.irq_disable = mask_per_irq,
 	.irq_ack = msp_per_irq_ack,
 #ifdef CONFIG_SMP

arch/mips/power/hibernate.S

@@ -35,7 +35,7 @@ LEAF(swsusp_arch_resume)
 0:
 	PTR_L t1, PBE_ADDRESS(t0)   /* source */
 	PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */
-	PTR_ADDIU t3, t1, PAGE_SIZE
+	PTR_ADDU t3, t1, PAGE_SIZE
 1:
 	REG_L t8, (t1)
 	REG_S t8, (t2)

arch/mips/rb532/gpio.c

@@ -185,7 +185,7 @@ int __init rb532_gpio_init(void)
 	struct resource *r;
 
 	r = rb532_gpio_reg0_res;
-	rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
+	rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r));
 
 	if (!rb532_gpio_chip->regbase) {
 		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");

arch/mips/sgi-ip22/ip22-platform.c

@@ -132,7 +132,7 @@ static struct platform_device eth1_device = {
  */
 static int __init sgiseeq_devinit(void)
 {
-	unsigned int tmp;
+	unsigned int pbdma __maybe_unused;
 	int res, i;
 
 	eth0_pd.hpc = hpc3c0;
@@ -151,7 +151,7 @@ static int __init sgiseeq_devinit(void)
 
 	/* Second HPC is missing? */
 	if (ip22_is_fullhouse() ||
-	    get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
+	    get_dbe(pbdma, (unsigned int *)&hpc3c1->pbdma[1]))
 		return 0;
 
 	sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 |

arch/mips/sgi-ip22/ip22-time.c

@@ -32,7 +32,7 @@
 static unsigned long dosample(void)
 {
 	u32 ct0, ct1;
-	u8 msb, lsb;
+	u8 msb;
 
 	/* Start the counter. */
 	sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
@@ -46,7 +46,7 @@ static unsigned long dosample(void)
 	/* Latch and spin until top byte of counter2 is zero */
 	do {
 		writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword);
-		lsb = readb(&sgint->tcnt2);
+		(void) readb(&sgint->tcnt2);
 		msb = readb(&sgint->tcnt2);
 		ct1 = read_c0_count();
 	} while (msb);

arch/mips/sgi-ip27/ip27-hubio.c

@@ -29,7 +29,6 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget,
 			  unsigned long xtalk_addr, size_t size)
 {
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
-	volatile hubreg_t junk;
 	unsigned i;
 
 	/* use small-window mapping if possible */
@@ -64,7 +63,7 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget,
 		 * after we write it.
 		 */
 		IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr);
-		junk = HUB_L(IIO_ITTE_GET(nasid, i));
+		(void) HUB_L(IIO_ITTE_GET(nasid, i));
 
 		return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE);
 	}

arch/mips/sgi-ip27/ip27-klnuma.c

@@ -54,11 +54,8 @@ void __init setup_replication_mask(void)
 
 static __init void set_ktext_source(nasid_t client_nasid, nasid_t server_nasid)
 {
-	cnodeid_t client_cnode;
 	kern_vars_t *kvp;
 
-	client_cnode = NASID_TO_COMPACT_NODEID(client_nasid);
-
 	kvp = &hub_data(client_nasid)->kern_vars;
 
 	KERN_VARS_ADDR(client_nasid) = (unsigned long)kvp;