Merge branch 'topic/core-change' into for-linus

Documentation/i2c/busses/i2c-piix4

@@ -8,7 +8,7 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
-  * AMD SB900
+  * AMD Hudson-2
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1454,6 +1454,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for internal PC-Speaker.
 
+    nopcm	- Disable PC-Speaker PCM sound. Only beeps remain.
     nforce_wa	- enable NForce chipset workaround. Expect bad sound.
 
     This module supports system beeps, some kind of PCM playback and
@@ -1631,7 +1632,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-sscape
   -----------------
 
-    Module for ENSONIQ SoundScape PnP cards.
+    Module for ENSONIQ SoundScape cards.
 
     port	- Port # (PnP setup)
     wss_port	- WSS Port # (PnP setup)
@@ -1639,10 +1640,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     mpu_irq	- MPU-401 IRQ # (PnP setup)
     dma		- DMA # (PnP setup)
     dma2	- 2nd DMA # (PnP setup, -1 to disable)
+    joystick	- Enable gameport - 0 = disable (default), 1 = enable
+
+    This module supports multiple cards.
 
-    This module supports multiple cards.  ISA PnP must be enabled.
-    You need sscape_ctl tool in alsa-tools package for loading
-    the microcode.
+    The driver requires the firmware loader support on kernel.
 
   Module snd-sun-amd7930 (on sparc only)
   --------------------------------------

Documentation/sound/alsa/ControlNames.txt

@@ -18,8 +18,9 @@ SOURCE:
   Master
   Master Mono
   Hardware Master
+  Speaker	(internal speaker)
   Headphone
-  PC Speaker
+  Beep		(beep generator)
   Phone
   Phone Input
   Phone Output

Documentation/thermal/sysfs-api.txt

@@ -1,5 +1,5 @@
 Generic Thermal Sysfs driver How To
-=========================
+===================================
 
 Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
 
@@ -10,20 +10,20 @@ Copyright (c)  2008 Intel Corporation
 
 0. Introduction
 
-The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
-and thermal cooling devices (fan, processor...) to register with the thermal management
-solution and to be a part of it.
+The generic thermal sysfs provides a set of interfaces for thermal zone
+devices (sensors) and thermal cooling devices (fan, processor...) to register
+with the thermal management solution and to be a part of it.
 
-This how-to focuses on enabling new thermal zone and cooling devices to participate
-in thermal management.
-This solution is platform independent and any type of thermal zone devices and
-cooling devices should be able to make use of the infrastructure.
+This how-to focuses on enabling new thermal zone and cooling devices to
+participate in thermal management.
+This solution is platform independent and any type of thermal zone devices
+and cooling devices should be able to make use of the infrastructure.
 
-The main task of the thermal sysfs driver is to expose thermal zone attributes as well
-as cooling device attributes to the user space.
-An intelligent thermal management application can make decisions based on inputs
-from thermal zone attributes (the current temperature and trip point temperature)
-and throttle appropriate devices.
+The main task of the thermal sysfs driver is to expose thermal zone attributes
+as well as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on
+inputs from thermal zone attributes (the current temperature and trip point
+temperature) and throttle appropriate devices.
 
 [0-*]	denotes any positive number starting from 0
 [1-*]	denotes any positive number starting from 1
@@ -31,77 +31,77 @@ and throttle appropriate devices.
 1. thermal sysfs driver interface functions
 
 1.1 thermal zone device interface
-1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
-				void *devdata, struct thermal_zone_device_ops *ops)
-
-	This interface function adds a new thermal zone device (sensor) to
-	/sys/class/thermal folder as thermal_zone[0-*].
-	It tries to bind all the thermal cooling devices registered at the same time.
-
-	name: the thermal zone name.
-	trips: the total number of trip points this thermal zone supports.
-	devdata: device private data
-	ops: thermal zone device call-backs.
-		.bind: bind the thermal zone device with a thermal cooling device.
-		.unbind: unbind the thermal zone device with a thermal cooling device.
-		.get_temp: get the current temperature of the thermal zone.
-		.get_mode: get the current mode (user/kernel) of the thermal zone.
-			   "kernel" means thermal management is done in kernel.
-			   "user" will prevent kernel thermal driver actions upon trip points
-			   so that user applications can take charge of thermal management.
-		.set_mode: set the mode (user/kernel) of the thermal zone.
-		.get_trip_type: get the type of certain trip point.
-		.get_trip_temp: get the temperature above which the certain trip point
-				will be fired.
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
+		int trips, void *devdata, struct thermal_zone_device_ops *ops)
+
+    This interface function adds a new thermal zone device (sensor) to
+    /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+    thermal cooling devices registered at the same time.
+
+    name: the thermal zone name.
+    trips: the total number of trip points this thermal zone supports.
+    devdata: device private data
+    ops: thermal zone device call-backs.
+	.bind: bind the thermal zone device with a thermal cooling device.
+	.unbind: unbind the thermal zone device with a thermal cooling device.
+	.get_temp: get the current temperature of the thermal zone.
+	.get_mode: get the current mode (user/kernel) of the thermal zone.
+	    - "kernel" means thermal management is done in kernel.
+	    - "user" will prevent kernel thermal driver actions upon trip points
+	      so that user applications can take charge of thermal management.
+	.set_mode: set the mode (user/kernel) of the thermal zone.
+	.get_trip_type: get the type of certain trip point.
+	.get_trip_temp: get the temperature above which the certain trip point
+			will be fired.
 
 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 
-	This interface function removes the thermal zone device.
-	It deletes the corresponding entry form /sys/class/thermal folder and unbind all
-	the thermal cooling devices it uses.
+    This interface function removes the thermal zone device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind all the thermal cooling devices it uses.
 
 1.2 thermal cooling device interface
 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
-					void *devdata, struct thermal_cooling_device_ops *)
-
-	This interface function adds a new thermal cooling device (fan/processor/...) to
-	/sys/class/thermal/ folder as cooling_device[0-*].
-	It tries to bind itself to all the thermal zone devices register at the same time.
-	name: the cooling device name.
-	devdata: device private data.
-	ops: thermal cooling devices call-backs.
-		.get_max_state: get the Maximum throttle state of the cooling device.
-		.get_cur_state: get the Current throttle state of the cooling device.
-		.set_cur_state: set the Current throttle state of the cooling device.
+		void *devdata, struct thermal_cooling_device_ops *)
+
+    This interface function adds a new thermal cooling device (fan/processor/...)
+    to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+    to all the thermal zone devices register at the same time.
+    name: the cooling device name.
+    devdata: device private data.
+    ops: thermal cooling devices call-backs.
+	.get_max_state: get the Maximum throttle state of the cooling device.
+	.get_cur_state: get the Current throttle state of the cooling device.
+	.set_cur_state: set the Current throttle state of the cooling device.
 
 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 
-	This interface function remove the thermal cooling device.
-	It deletes the corresponding entry form /sys/class/thermal folder and unbind
-	itself from all	the thermal zone devices using it.
+    This interface function remove the thermal cooling device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind itself from all the thermal zone devices using it.
 
 1.3 interface for binding a thermal zone device with a thermal cooling device
 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
-			int trip, struct thermal_cooling_device *cdev);
+		int trip, struct thermal_cooling_device *cdev);
 
-	This interface function bind a thermal cooling device to the certain trip point
-	of a thermal zone device.
-	This function is usually called in the thermal zone device .bind callback.
-	tz: the thermal zone device
-	cdev: thermal cooling device
-	trip: indicates which trip point the cooling devices is associated with
-		 in this thermal zone.
+    This interface function bind a thermal cooling device to the certain trip
+    point of a thermal zone device.
+    This function is usually called in the thermal zone device .bind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+	  in this thermal zone.
 
 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
-				int trip, struct thermal_cooling_device *cdev);
+		int trip, struct thermal_cooling_device *cdev);
 
-	This interface function unbind a thermal cooling device from the certain trip point
-	of a thermal zone device.
-	This function is usually called in the thermal zone device .unbind callback.
-	tz: the thermal zone device
-	cdev: thermal cooling device
-	trip: indicates which trip point the cooling devices is associated with
-		in this thermal zone.
+    This interface function unbind a thermal cooling device from the certain
+    trip point of a thermal zone device. This function is usually called in
+    the thermal zone device .unbind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+	  in this thermal zone.
 
 2. sysfs attributes structure
 
@@ -114,153 +114,166 @@ if hwmon is compiled in or built as a module.
 
 Thermal zone device sys I/F, created once it's registered:
 /sys/class/thermal/thermal_zone[0-*]:
-	|-----type:			Type of the thermal zone
-	|-----temp:			Current temperature
-	|-----mode:			Working mode of the thermal zone
-	|-----trip_point_[0-*]_temp:	Trip point temperature
-	|-----trip_point_[0-*]_type:	Trip point type
+    |---type:			Type of the thermal zone
+    |---temp:			Current temperature
+    |---mode:			Working mode of the thermal zone
+    |---trip_point_[0-*]_temp:	Trip point temperature
+    |---trip_point_[0-*]_type:	Trip point type
 
 Thermal cooling device sys I/F, created once it's registered:
 /sys/class/thermal/cooling_device[0-*]:
-	|-----type :			Type of the cooling device(processor/fan/...)
-	|-----max_state:		Maximum cooling state of the cooling device
-	|-----cur_state:		Current cooling state of the cooling device
+    |---type:			Type of the cooling device(processor/fan/...)
+    |---max_state:		Maximum cooling state of the cooling device
+    |---cur_state:		Current cooling state of the cooling device
 
 
-These two dynamic attributes are created/removed in pairs.
-They represent the relationship between a thermal zone and its associated cooling device.
-They are created/removed for each
-thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
+Then next two dynamic attributes are created/removed in pairs. They represent
+the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each successful execution of
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device.
 
-/sys/class/thermal/thermal_zone[0-*]
-	|-----cdev[0-*]:		The [0-*]th cooling device in the current thermal zone
-	|-----cdev[0-*]_trip_point:	Trip point that cdev[0-*] is associated with
+/sys/class/thermal/thermal_zone[0-*]:
+    |---cdev[0-*]:		[0-*]th cooling device in current thermal zone
+    |---cdev[0-*]_trip_point:	Trip point that cdev[0-*] is associated with
 
 Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
-the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
-thermal zone device. E.g. the generic thermal driver registers one hwmon class device
-and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
+the generic thermal driver also creates a hwmon sysfs I/F for each _type_
+of thermal zone device. E.g. the generic thermal driver registers one hwmon
+class device and build the associated hwmon sysfs I/F for all the registered
+ACPI thermal zones.
+
 /sys/class/hwmon/hwmon[0-*]:
-	|-----name:			The type of the thermal zone devices.
-	|-----temp[1-*]_input:		The current temperature of thermal zone [1-*].
-	|-----temp[1-*]_critical:	The critical trip point of thermal zone [1-*].
+    |---name:			The type of the thermal zone devices
+    |---temp[1-*]_input:	The current temperature of thermal zone [1-*]
+    |---temp[1-*]_critical:	The critical trip point of thermal zone [1-*]
+
 Please read Documentation/hwmon/sysfs-interface for additional information.
 
 ***************************
 * Thermal zone attributes *
 ***************************
 
-type				Strings which represent the thermal zone type.
-				This is given by thermal zone driver as part of registration.
-				Eg: "acpitz" indicates it's an ACPI thermal device.
-				In order to keep it consistent with hwmon sys attribute,
-				this should be a short, lowercase string,
-				not containing spaces nor dashes.
-				RO
-				Required
-
-temp				Current temperature as reported by thermal zone (sensor)
-				Unit: millidegree Celsius
-				RO
-				Required
-
-mode				One of the predefined values in [kernel, user]
-				This file gives information about the algorithm
-				that is currently managing the thermal zone.
-				It can be either default kernel based algorithm
-				or user space application.
-				RW
-				Optional
-				kernel	= Thermal management in kernel thermal zone driver.
-				user	= Preventing kernel thermal zone driver actions upon
-					  trip points so that user application can take full
-					  charge of the thermal management.
-
-trip_point_[0-*]_temp		The temperature above which trip point will be fired
-				Unit: millidegree Celsius
-				RO
-				Optional
-
-trip_point_[0-*]_type 		Strings which indicate the type of the trip point
-				E.g. it can be one of critical, hot, passive,
-				    active[0-*] for ACPI thermal zone.
-				RO
-				Optional
-
-cdev[0-*]			Sysfs link to the thermal cooling device node where the sys I/F
-				for cooling device throttling control represents.
-				RO
-				Optional
-
-cdev[0-*]_trip_point		The trip point with which cdev[0-*] is associated in this thermal zone
-				-1 means the cooling device is not associated with any trip point.
-				RO
-				Optional
-
-******************************
-* Cooling device  attributes *
-******************************
-
-type				String which represents the type of device
-				eg: For generic ACPI: this should be "Fan",
-				"Processor" or "LCD"
-				eg. For memory controller device on intel_menlow platform:
-				this should be "Memory controller"
-				RO
-				Required
-
-max_state			The maximum permissible cooling state of this cooling device.
-				RO
-				Required
-
-cur_state			The current cooling state of this cooling device.
-				the value can any integer numbers between 0 and max_state,
-				cur_state == 0 means no cooling
-				cur_state == max_state means the maximum cooling.
-				RW
-				Required
+type
+	Strings which represent the thermal zone type.
+	This is given by thermal zone driver as part of registration.
+	E.g: "acpitz" indicates it's an ACPI thermal device.
+	In order to keep it consistent with hwmon sys attribute; this should
+	be a short, lowercase string, not containing spaces nor dashes.
+	RO, Required
+
+temp
+	Current temperature as reported by thermal zone (sensor).
+	Unit: millidegree Celsius
+	RO, Required
+
+mode
+	One of the predefined values in [kernel, user].
+	This file gives information about the algorithm that is currently
+	managing the thermal zone. It can be either default kernel based
+	algorithm or user space application.
+	kernel	= Thermal management in kernel thermal zone driver.
+	user	= Preventing kernel thermal zone driver actions upon
+		  trip points so that user application can take full
+		  charge of the thermal management.
+	RW, Optional
+
+trip_point_[0-*]_temp
+	The temperature above which trip point will be fired.
+	Unit: millidegree Celsius
+	RO, Optional
+
+trip_point_[0-*]_type
+	Strings which indicate the type of the trip point.
+	E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
+	thermal zone.
+	RO, Optional
+
+cdev[0-*]
+	Sysfs link to the thermal cooling device node where the sys I/F
+	for cooling device throttling control represents.
+	RO, Optional
+
+cdev[0-*]_trip_point
+	The trip point with which cdev[0-*] is associated in this thermal
+	zone; -1 means the cooling device is not associated with any trip
+	point.
+	RO, Optional
+
+passive
+	Attribute is only present for zones in which the passive cooling
+	policy is not supported by native thermal driver. Default is zero
+	and can be set to a temperature (in millidegrees) to enable a
+	passive trip point for the zone. Activation is done by polling with
+	an interval of 1 second.
+	Unit: millidegrees Celsius
+	RW, Optional
+
+*****************************
+* Cooling device attributes *
+*****************************
+
+type
+	String which represents the type of device, e.g:
+	- for generic ACPI: should be "Fan", "Processor" or "LCD"
+	- for memory controller device on intel_menlow platform:
+	  should be "Memory controller".
+	RO, Required
+
+max_state
+	The maximum permissible cooling state of this cooling device.
+	RO, Required
+
+cur_state
+	The current cooling state of this cooling device.
+	The value can any integer numbers between 0 and max_state:
+	- cur_state == 0 means no cooling
+	- cur_state == max_state means the maximum cooling.
+	RW, Required
 
 3. A simple implementation
 
-ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
-If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
-it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
-It has one processor and one fan, which are both registered as thermal_cooling_device.
-If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
-the sys I/F structure will be built like this:
+ACPI thermal zone may support multiple trip points like critical, hot,
+passive, active. If an ACPI thermal zone supports critical, passive,
+active[0] and active[1] at the same time, it may register itself as a
+thermal_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as
+thermal_cooling_device.
+
+If the processor is listed in _PSL method, and the fan is listed in _AL0
+method, the sys I/F structure will be built like this:
 
 /sys/class/thermal:
 
 |thermal_zone1:
-	|-----type:			acpitz
-	|-----temp:			37000
-	|-----mode:			kernel
-	|-----trip_point_0_temp:	100000
-	|-----trip_point_0_type:	critical
-	|-----trip_point_1_temp:	80000
-	|-----trip_point_1_type:	passive
-	|-----trip_point_2_temp:	70000
-	|-----trip_point_2_type:	active0
-	|-----trip_point_3_temp:	60000
-	|-----trip_point_3_type:	active1
-	|-----cdev0:			--->/sys/class/thermal/cooling_device0
-	|-----cdev0_trip_point:		1	/* cdev0 can be used for passive */
-	|-----cdev1:			--->/sys/class/thermal/cooling_device3
-	|-----cdev1_trip_point:		2	/* cdev1 can be used for active[0]*/
+    |---type:			acpitz
+    |---temp:			37000
+    |---mode:			kernel
+    |---trip_point_0_temp:	100000
+    |---trip_point_0_type:	critical
+    |---trip_point_1_temp:	80000
+    |---trip_point_1_type:	passive
+    |---trip_point_2_temp:	70000
+    |---trip_point_2_type:	active0
+    |---trip_point_3_temp:	60000
+    |---trip_point_3_type:	active1
+    |---cdev0:			--->/sys/class/thermal/cooling_device0
+    |---cdev0_trip_point:	1	/* cdev0 can be used for passive */
+    |---cdev1:			--->/sys/class/thermal/cooling_device3
+    |---cdev1_trip_point:	2	/* cdev1 can be used for active[0]*/
 
 |cooling_device0:
-	|-----type:			Processor
-	|-----max_state:		8
-	|-----cur_state:		0
+    |---type:			Processor
+    |---max_state:		8
+    |---cur_state:		0
 
 |cooling_device3:
-	|-----type:			Fan
-	|-----max_state:		2
-	|-----cur_state:		0
+    |---type:			Fan
+    |---max_state:		2
+    |---cur_state:		0
 
 /sys/class/hwmon:
 
 |hwmon0:
-	|-----name:			acpitz
-	|-----temp1_input:		37000
-	|-----temp1_crit:		100000
+    |---name:			acpitz
+    |---temp1_input:		37000
+    |---temp1_crit:		100000

Documentation/vm/page-types.c

@@ -218,7 +218,7 @@ static void fatal(const char *x, ...)
 	exit(EXIT_FAILURE);
 }
 
-int checked_open(const char *pathname, int flags)
+static int checked_open(const char *pathname, int flags)
 {
 	int fd = open(pathname, flags);
 

MAINTAINERS

@@ -182,7 +182,7 @@ M:	Ron Minnich <rminnich@sandia.gov>
 M:	Latchesar Ionkov <lucho@ionkov.net>
 L:	v9fs-developer@lists.sourceforge.net
 W:	http://swik.net/v9fs
-T:	git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs.git
 S:	Maintained
 F:	Documentation/filesystems/9p.txt
 F:	fs/9p/
@@ -906,7 +906,6 @@ M:	Karol Kozimor <sziwan@users.sourceforge.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
-F:	arch/x86/kernel/acpi/boot.c
 F:	drivers/platform/x86/asus_acpi.c
 
 ASUS ASB100 HARDWARE MONITOR DRIVER
@@ -1245,11 +1244,10 @@ S:	Supported
 F:	drivers/net/tg3.*
 
 BROCADE BFA FC SCSI DRIVER
-P:      Jing Huang
-M:      huangj@brocade.com
-L:      linux-scsi@vger.kernel.org
-S:      Supported
-F:      drivers/scsi/bfa/
+M:	Jing Huang <huangj@brocade.com>
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+F:	drivers/scsi/bfa/
 
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
@@ -2825,7 +2823,7 @@ F:	drivers/infiniband/hw/ipath/
 
 IPMI SUBSYSTEM
 M:	Corey Minyard <minyard@acm.org>
-L:	openipmi-developer@lists.sourceforge.net
+L:	openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://openipmi.sourceforge.net/
 S:	Supported
 F:	Documentation/IPMI.txt
@@ -3086,9 +3084,13 @@ F:	kernel/kgdb.c
 
 KMEMCHECK
 M:	Vegard Nossum <vegardno@ifi.uio.no>
-P	Pekka Enberg
-M:	penberg@cs.helsinki.fi
+M:	Pekka Enberg <penberg@cs.helsinki.fi>
 S:	Maintained
+F:	Documentation/kmemcheck.txt
+F:	arch/x86/include/asm/kmemcheck.h
+F:	arch/x86/mm/kmemcheck/
+F:	include/linux/kmemcheck.h
+F:	mm/kmemcheck.c
 
 KMEMLEAK
 M:	Catalin Marinas <catalin.marinas@arm.com>
@@ -3618,7 +3620,7 @@ L:	netfilter@vger.kernel.org
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
-T:	git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
@@ -3665,6 +3667,7 @@ L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 W:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -4329,6 +4332,8 @@ F:	drivers/video/aty/aty128fb.c
 
 RALINK RT2X00 WIRELESS LAN DRIVER
 P:	rt2x00 project
+M:	Ivo van Doorn <IvDoorn@gmail.com>
+M:	Gertjan van Wingerde <gwingerde@gmail.com>
 L:	linux-wireless@vger.kernel.org
 L:	users@rt2x00.serialmonkey.com (moderated for non-subscribers)
 W:	http://rt2x00.serialmonkey.com/
@@ -4416,7 +4421,7 @@ RFKILL
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-F	Documentation/rfkill.txt
+F:	Documentation/rfkill.txt
 F:	net/rfkill/
 
 RISCOM8 DRIVER
@@ -4636,7 +4641,7 @@ F:	drivers/mmc/host/sdhci-s3c.c
 SECURITY SUBSYSTEM
 M:	James Morris <jmorris@namei.org>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
-T:	git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
 W:	http://security.wiki.kernel.org/
 S:	Supported
 F:	security/
@@ -4672,12 +4677,11 @@ F:	include/linux/ata.h
 F:	include/linux/libata.h
 
 SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
-P:     Jayamohan Kallickal
-M:     jayamohank@serverengines.com
-L:     linux-scsi@vger.kernel.org
-W:     http://www.serverengines.com
-S:     Supported
-F:     drivers/scsi/be2iscsi/
+M:	Jayamohan Kallickal <jayamohank@serverengines.com>
+L:	linux-scsi@vger.kernel.org
+W:	http://www.serverengines.com
+S:	Supported
+F:	drivers/scsi/be2iscsi/
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
 M:	Sathya Perla <sathyap@serverengines.com>
@@ -5683,11 +5687,11 @@ F:	drivers/vlynq/vlynq.c
 F:	include/linux/vlynq.h
 
 VMWARE VMXNET3 ETHERNET DRIVER
-M:     Shreyas Bhatewara <sbhatewara@vmware.com>
-M:     VMware, Inc. <pv-drivers@vmware.com>
-L:     netdev@vger.kernel.org
-S:     Maintained
-F:     drivers/net/vmxnet3/
+M:	Shreyas Bhatewara <sbhatewara@vmware.com>
+M:	"VMware, Inc." <pv-drivers@vmware.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/vmxnet3/
 
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
 M:	Liam Girdwood <lrg@slimlogic.co.uk>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -221,7 +221,7 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 
 HOSTCC       = gcc
 HOSTCXX      = g++
-HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
 HOSTCXXFLAGS = -O2
 
 # Decide whether to build built-in, modular, or both.

arch/alpha/boot/tools/objstrip.c

@@ -35,7 +35,7 @@
 const char * prog_name;
 
 
-void
+static void
 usage (void)
 {
     fprintf(stderr,

arch/alpha/include/asm/fcntl.h

@@ -26,8 +26,6 @@
 #define F_GETOWN	6	/*  for sockets. */
 #define F_SETSIG	10	/*  for sockets. */
 #define F_GETSIG	11	/*  for sockets. */
-#define F_SETOWN_EX	12
-#define F_GETOWN_EX	13
 
 /* for posix fcntl() and lockf() */
 #define F_RDLCK		1

arch/alpha/include/asm/thread_info.h

@@ -50,12 +50,12 @@ struct thread_info {
 register struct thread_info *__current_thread_info __asm__("$8");
 #define current_thread_info()  __current_thread_info
 
+#endif /* __ASSEMBLY__ */
+
 /* Thread information allocation.  */
 #define THREAD_SIZE_ORDER 1
 #define THREAD_SIZE (2*PAGE_SIZE)
 
-#endif /* __ASSEMBLY__ */
-
 #define PREEMPT_ACTIVE		0x40000000
 
 /*

arch/arm/configs/ams_delta_defconfig

@@ -55,10 +55,10 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS is not set
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -224,7 +224,7 @@ CONFIG_CPU_CP15_MMU=y
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_CPU_DCACHE_WRITETHROUGH=y
@@ -248,7 +248,7 @@ CONFIG_CPU_DCACHE_WRITETHROUGH=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -299,7 +299,9 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
 
 #
 # Networking
@@ -670,7 +672,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -784,6 +786,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Dallas's 1-wire bus
@@ -820,6 +823,7 @@ CONFIG_LEDS_AMS_DELTA=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # Multimedia devices
@@ -896,7 +900,13 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_AMS_DELTA=y
 
 #
 # HID Devices

arch/arm/configs/kirkwood_defconfig

@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 11:58:57 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov  7 20:31:18 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=19
 # CONFIG_GROUP_SCHED is not set
@@ -73,7 +71,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -86,6 +83,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -95,13 +96,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -114,7 +119,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -156,25 +164,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -185,6 +195,7 @@ CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
+CONFIG_MACH_OPENRD_BASE=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -195,7 +206,7 @@ CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -211,6 +222,7 @@ CONFIG_ARM_THUMB=y
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_FEROCEON_L2=y
 # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
@@ -235,11 +247,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -254,10 +267,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 
 #
 # Boot options
@@ -345,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -367,6 +383,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,17 +400,18 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_MINSTREL=y
 # CONFIG_MAC80211_RC_DEFAULT_PID is not set
 CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
@@ -414,6 +432,7 @@ CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -425,9 +444,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -494,6 +513,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -543,6 +563,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -567,10 +588,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -587,6 +604,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -595,6 +614,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -611,7 +631,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -623,11 +642,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
 # CONFIG_SATA_SIL24 is not set
@@ -649,6 +671,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -676,6 +699,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -693,13 +717,16 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -768,6 +795,9 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -789,6 +819,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -797,10 +828,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
@@ -820,9 +848,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
 # CONFIG_IWLWIFI is not set
@@ -832,6 +858,8 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 # CONFIG_HERMES is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -855,6 +883,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -878,13 +907,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -943,6 +978,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -998,10 +1034,6 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1023,11 +1055,47 @@ CONFIG_SPI_ORION=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1041,33 +1109,28 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1087,7 +1150,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1106,10 +1168,12 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1123,9 +1187,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1150,18 +1219,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1252,11 +1324,14 @@ CONFIG_SDIO_UART=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_MVSDIO=y
 # CONFIG_MMC_SPI is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1266,7 +1341,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -1278,11 +1353,14 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1314,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1325,6 +1404,7 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1360,8 +1440,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1379,10 +1462,13 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1455,7 +1541,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1530,6 +1615,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1547,6 +1633,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1567,12 +1654,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
@@ -1581,25 +1670,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1623,7 +1699,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1665,11 +1740,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1714,6 +1791,7 @@ CONFIG_CRYPTO_ARC4=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 

arch/arm/configs/omap3_pandora_defconfig

@@ -611,7 +611,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -634,7 +634,8 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
 
 #
 # Hardware I/O ports
@@ -834,7 +835,29 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_USB=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_TWL4030=y
+
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1020,7 +1043,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1084,9 +1113,12 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_TWL4030=y
+
 #
 # File systems
 #
@@ -1407,3 +1439,10 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+
+# added by hand for now
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_TWL4030_USB=y
+CONFIG_MMC_OMAP_HS=y
+

arch/arm/configs/omap_3430sdp_defconfig

@@ -1703,7 +1703,14 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 

arch/arm/configs/orion5x_defconfig

@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 14:07:25 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov  7 20:52:21 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -69,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -82,6 +79,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
@@ -91,13 +92,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -109,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -130,19 +135,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -151,25 +159,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 CONFIG_ARCH_ORION5X=y
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Orion Implementations
@@ -187,6 +197,9 @@ CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_EDMINI_V2=y
+CONFIG_MACH_D2NET=y
+CONFIG_MACH_BIGDISK=y
+CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2=y
 CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
@@ -202,7 +215,7 @@ CONFIG_CPU_FEROCEON=y
 CONFIG_CPU_FEROCEON_OLD_ID=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -215,7 +228,7 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
@@ -240,11 +253,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -259,12 +273,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 
 #
 # Boot options
@@ -308,6 +324,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -356,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -378,6 +396,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -394,11 +413,15 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -411,6 +434,7 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -422,9 +446,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -537,6 +561,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
@@ -552,7 +577,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,10 +603,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -596,6 +619,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -604,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -620,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -632,11 +657,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -658,6 +686,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -685,6 +714,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -703,13 +733,16 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -777,6 +810,8 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -798,6 +833,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -806,10 +842,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -835,6 +868,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -855,13 +889,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -912,6 +952,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -967,20 +1008,55 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1030,6 +1106,8 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1041,9 +1119,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1057,33 +1133,26 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1097,7 +1166,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1116,10 +1184,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1130,10 +1199,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1160,18 +1230,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1248,7 +1321,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1258,7 +1330,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1269,11 +1341,14 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1306,6 +1381,7 @@ CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1344,8 +1420,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1358,10 +1437,10 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
 CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=m
@@ -1370,10 +1449,13 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1446,7 +1528,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1537,6 +1618,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1552,6 +1634,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1572,6 +1655,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -1579,6 +1663,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
@@ -1587,25 +1672,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1629,20 +1701,19 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1670,11 +1741,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1691,7 +1764,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1719,6 +1792,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 

arch/arm/include/asm/unistd.h

@@ -402,6 +402,15 @@
 #define __ARM_NR_usr32			(__ARM_NR_BASE+4)
 #define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
 
+/*
+ * *NOTE*: This is a ghost syscall private to the kernel.  Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence.  Don't ever use this from user code.
+ */
+#ifdef __KERNEL__
+#define __ARM_NR_cmpxchg		(__ARM_NR_BASE+0x00fff0)
+#endif
+
 /*
  * The following syscalls are obsolete and no longer available for EABI.
  */

arch/arm/kernel/entry-armv.S

@@ -21,6 +21,7 @@
 #include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
+#include <asm/unistd.h>
 
 #include "entry-header.S"
 
@@ -908,10 +909,10 @@ __kuser_cmpxchg:				@ 0xffff0fc0
 	 * A special ghost syscall is used for that (see traps.c).
 	 */
 	stmfd	sp!, {r7, lr}
-	mov	r7, #0xff00		@ 0xfff0 into r7 for EABI
-	orr	r7, r7, #0xf0
-	swi	#0x9ffff0
+	ldr	r7, =1f			@ it's 20 bits
+	swi	__ARM_NR_cmpxchg
 	ldmfd	sp!, {r7, pc}
+1:	.word	__ARM_NR_cmpxchg
 
 #elif __LINUX_ARM_ARCH__ < 6
 

arch/arm/kernel/head-common.S

@@ -97,7 +97,7 @@ __error_a:
 	bl	printhex8
 	adr	r0, str_a2
 	bl	printascii
-	adr	r3, 3f
+	adr	r3, 4f
 	ldmia	r3, {r4, r5, r6}		@ get machine desc list
 	sub	r4, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r4			@ convert virt addresses to

arch/arm/kernel/smp_scu.c

@@ -37,6 +37,10 @@ void __init scu_enable(void __iomem *scu_base)
 	u32 scu_ctrl;
 
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	/* already enabled? */
+	if (scu_ctrl & 1)
+		return;
+
 	scu_ctrl |= 1;
 	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
 

arch/arm/kernel/traps.c

@@ -528,7 +528,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	 * __kuser_cmpxchg code in entry-armv.S should be aware of its
 	 * existence.  Don't ever use this from user code.
 	 */
-	case 0xfff0:
+	case NR(cmpxchg):
 	for (;;) {
 		extern void do_DataAbort(unsigned long addr, unsigned int fsr,
 					 struct pt_regs *regs);
@@ -573,7 +573,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		   if not implemented, rather than raising SIGILL.  This
 		   way the calling program can gracefully determine whether
 		   a feature is supported.  */
-		if (no <= 0x7ff)
+		if ((no & 0xffff) <= 0x7ff)
 			return -ENOSYS;
 		break;
 	}

arch/arm/mach-at91/Kconfig

@@ -289,13 +289,6 @@ config MACH_NEOCORE926
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
-config MACH_AT91SAM9G20EK_2MMC
-	bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
-	depends on ARCH_AT91SAM9G20
-	help
-	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-	  Rev A or B modified for 2 MMC Slots.
-
 endif
 
 # ----------------------------------------------------------
@@ -322,7 +315,16 @@ config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
 	depends on ARCH_AT91SAM9G20
 	help
-	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+	  that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+	  onwards.
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
@@ -392,7 +394,7 @@ config MTD_AT91_DATAFLASH_CARD
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).

arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c

@@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_ATMELMCI)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = {
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PC12,
+	.phy_irq_pin	= AT91_PIN_PB0,
 	.is_rmii	= 1,
 };
 
@@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void)
 
 /*
  * MCI (SD/MMC)
- * det_pin and wp_pin are not connected
+ * wp_pin is not connected
  */
 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
 	.slot[0] = {
 		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
+		.detect_pin	= AT91_PIN_PC2,
 		.wp_pin		= -ENODEV,
 	},
 	.slot[1] = {
 		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
+		.detect_pin	= AT91_PIN_PC9,
 		.wp_pin		= -ENODEV,
 	},
 
 };
 #else
-static struct amci_platform_data __initdata ek_mmc_data = {
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.slot_b		= 1,	/* Only one slot so use slot B */
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PC9,
 };
 #endif
 
@@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = {
 static struct gpio_led ek_leds[] = {
 	{	/* "bottom" led, green, userled1 to be defined */
 		.name			= "ds5",
-		.gpio			= AT91_PIN_PB12,
+		.gpio			= AT91_PIN_PB8,
 		.active_low		= 1,
 		.default_trigger	= "none",
 	},
 	{	/* "power" led, yellow */
 		.name			= "ds1",
-		.gpio			= AT91_PIN_PB13,
+		.gpio			= AT91_PIN_PB9,
 		.default_trigger	= "heartbeat",
 	}
 };
@@ -254,7 +257,11 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &ek_mmc_data);
+#else
+	at91_add_device_mmc(0, &ek_mmc_data);
+#endif
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */

arch/arm/mach-ep93xx/micro9.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 

arch/arm/mach-kirkwood/addr-map.c

@@ -105,7 +105,7 @@ void __init kirkwood_setup_cpu_mbus(void)
 	setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
 		      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
 	setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
-		      TARGET_PCIE, ATTR_PCIE_MEM, -1);
+		      TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
 
 	/*
 	 * Setup window for NAND controller.

arch/arm/mach-kirkwood/common.c

@@ -845,7 +845,7 @@ int __init kirkwood_find_tclk(void)
 	return 166666667;
 }
 
-static void kirkwood_timer_init(void)
+static void __init kirkwood_timer_init(void)
 {
 	kirkwood_tclk = kirkwood_find_tclk();
 	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
@@ -915,6 +915,14 @@ void __init kirkwood_init(void)
 	kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
 	kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
 
+	/*
+	 * Disable propagation of mbus errors to the CPU local bus,
+	 * as this causes mbus errors (which can occur for example
+	 * for PCI aborts) to throw CPU aborts, which we're not set
+	 * up to deal with.
+	 */
+	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
 	kirkwood_setup_cpu_mbus();
 
 #ifdef CONFIG_CACHE_FEROCEON_L2

arch/arm/mach-kirkwood/include/mach/bridge-regs.h

@@ -13,6 +13,9 @@
 
 #include <mach/kirkwood.h>
 
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG_ERROR_PROP	0x00000004
+
 #define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
 #define CPU_RESET		0x00000002
 

arch/arm/mach-kirkwood/include/mach/io.h

@@ -15,7 +15,7 @@
 
 static inline void __iomem *__io(unsigned long addr)
 {
-	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
 					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 

arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -43,6 +43,7 @@
 #define KIRKWOOD_REGS_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
+#define KIRKWOOD_PCIE_MEM_BUS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
 
 /*

arch/arm/mach-kirkwood/openrd_base-setup.c

@@ -70,8 +70,20 @@ static void __init openrd_base_init(void)
 	kirkwood_ge00_init(&openrd_base_ge00_data);
 	kirkwood_sata_init(&openrd_base_sata_data);
 	kirkwood_sdio_init(&openrd_base_mvsdio_data);
+
+	kirkwood_i2c_init();
 }
 
+static int __init openrd_base_pci_init(void)
+{
+	if (machine_is_openrd_base())
+		kirkwood_pcie_init();
+
+	return 0;
+ }
+subsys_initcall(openrd_base_pci_init);
+
+
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,

arch/arm/mach-kirkwood/pcie.c

@@ -93,7 +93,7 @@ static struct pci_ops pcie_ops = {
 };
 
 
-static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
 	extern unsigned int kirkwood_clk_ctrl;
@@ -115,7 +115,7 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	 */
 	res[0].name = "PCIe I/O Space";
 	res[0].flags = IORESOURCE_IO;
-	res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+	res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
 	res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
 	if (request_resource(&ioport_resource, &res[0]))
 		panic("Request PCIe IO resource failed\n");
@@ -126,7 +126,7 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	 */
 	res[1].name = "PCIe Memory Space";
 	res[1].flags = IORESOURCE_MEM;
-	res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+	res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE;
 	res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
 	if (request_resource(&iomem_resource, &res[1]))
 		panic("Request PCIe Memory resource failed\n");

arch/arm/mach-ks8695/include/mach/regs-switch.h

@@ -25,7 +25,7 @@
 #define KS8695_SEC1		(0x04)		/* Switch Engine Control 1 */
 #define KS8695_SEC2		(0x08)		/* Switch Engine Control 2 */
 
-#define KS8695_P(x)_C(z)	(0xc0 + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
+#define KS8695_SEPXCZ(x,z)	(0x0c + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
 
 #define KS8695_SEP12AN		(0x48)		/* Port 1 & 2 Auto-Negotiation */
 #define KS8695_SEP34AN		(0x4c)		/* Port 3 & 4 Auto-Negotiation */

arch/arm/mach-mmp/include/mach/mfp-pxa910.h

@@ -160,7 +160,7 @@
 #define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 
 /* PWM */
-#define GPIO27 PWM3 AF2		MFP_CFG(GPIO27, AF2)
+#define GPIO27_PWM3_AF2		MFP_CFG(GPIO27, AF2)
 #define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
 #define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
 #define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)

arch/arm/mach-mv78xx0/common.c

@@ -845,6 +845,8 @@ static char * __init mv78xx0_id(void)
 	} else if (dev == MV78100_DEV_ID) {
 		if (rev == MV78100_REV_A0)
 			return "MV78100-A0";
+		else if (rev == MV78100_REV_A1)
+			return "MV78100-A1";
 		else
 			return "MV78100-Rev-Unsupported";
 	} else if (dev == MV78200_DEV_ID) {

arch/arm/mach-mv78xx0/include/mach/mv78xx0.h

@@ -112,6 +112,7 @@
 
 #define MV78100_DEV_ID		0x7810
 #define MV78100_REV_A0		1
+#define MV78100_REV_A1		2
 
 #define MV78200_DEV_ID		0x7820
 #define MV78200_REV_A0		1

arch/arm/mach-omap2/board-omap3beagle.c

@@ -162,7 +162,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
 
 	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
 	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
-	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;

arch/arm/mach-omap2/board-omap3pandora.c

@@ -134,50 +134,50 @@ static void __init pandora_keys_gpio_init(void)
 }
 
 static int board_keymap[] = {
-	/* col, row, code */
+	/* row, col, code */
 	KEY(0, 0, KEY_9),
-	KEY(0, 1, KEY_0),
-	KEY(0, 2, KEY_BACKSPACE),
-	KEY(0, 3, KEY_O),
-	KEY(0, 4, KEY_P),
-	KEY(0, 5, KEY_K),
-	KEY(0, 6, KEY_L),
-	KEY(0, 7, KEY_ENTER),
-	KEY(1, 0, KEY_8),
+	KEY(0, 1, KEY_8),
+	KEY(0, 2, KEY_I),
+	KEY(0, 3, KEY_J),
+	KEY(0, 4, KEY_N),
+	KEY(0, 5, KEY_M),
+	KEY(1, 0, KEY_0),
 	KEY(1, 1, KEY_7),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_5),
-	KEY(1, 4, KEY_4),
-	KEY(1, 5, KEY_3),
-	KEY(1, 6, KEY_2),
-	KEY(1, 7, KEY_1),
-	KEY(2, 0, KEY_I),
-	KEY(2, 1, KEY_U),
+	KEY(1, 2, KEY_U),
+	KEY(1, 3, KEY_H),
+	KEY(1, 4, KEY_B),
+	KEY(1, 5, KEY_SPACE),
+	KEY(2, 0, KEY_BACKSPACE),
+	KEY(2, 1, KEY_6),
 	KEY(2, 2, KEY_Y),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_R),
-	KEY(2, 5, KEY_E),
-	KEY(2, 6, KEY_W),
-	KEY(2, 7, KEY_Q),
-	KEY(3, 0, KEY_J),
-	KEY(3, 1, KEY_H),
-	KEY(3, 2, KEY_G),
+	KEY(2, 3, KEY_G),
+	KEY(2, 4, KEY_V),
+	KEY(2, 5, KEY_FN),
+	KEY(3, 0, KEY_O),
+	KEY(3, 1, KEY_5),
+	KEY(3, 2, KEY_T),
 	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_D),
-	KEY(3, 5, KEY_S),
-	KEY(3, 6, KEY_A),
-	KEY(3, 7, KEY_LEFTSHIFT),
-	KEY(4, 0, KEY_N),
-	KEY(4, 1, KEY_B),
-	KEY(4, 2, KEY_V),
-	KEY(4, 3, KEY_C),
+	KEY(3, 4, KEY_C),
+	KEY(4, 0, KEY_P),
+	KEY(4, 1, KEY_4),
+	KEY(4, 2, KEY_R),
+	KEY(4, 3, KEY_D),
 	KEY(4, 4, KEY_X),
-	KEY(4, 5, KEY_Z),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 7, KEY_COMMA),
-	KEY(5, 0, KEY_M),
-	KEY(5, 1, KEY_SPACE),
-	KEY(5, 2, KEY_FN),
+	KEY(5, 0, KEY_K),
+	KEY(5, 1, KEY_3),
+	KEY(5, 2, KEY_E),
+	KEY(5, 3, KEY_S),
+	KEY(5, 4, KEY_Z),
+	KEY(6, 0, KEY_L),
+	KEY(6, 1, KEY_2),
+	KEY(6, 2, KEY_W),
+	KEY(6, 3, KEY_A),
+	KEY(6, 4, KEY_DOT),
+	KEY(7, 0, KEY_ENTER),
+	KEY(7, 1, KEY_1),
+	KEY(7, 2, KEY_Q),
+	KEY(7, 3, KEY_LEFTSHIFT),
+	KEY(7, 4, KEY_COMMA),
 };
 
 static struct matrix_keymap_data board_map_data = {

arch/arm/mach-omap2/board-zoom2.c

@@ -30,57 +30,56 @@
 /* Zoom2 has Qwerty keyboard*/
 static int board_keymap[] = {
 	KEY(0, 0, KEY_E),
-	KEY(1, 0, KEY_R),
-	KEY(2, 0, KEY_T),
-	KEY(3, 0, KEY_HOME),
-	KEY(6, 0, KEY_I),
-	KEY(7, 0, KEY_LEFTSHIFT),
-	KEY(0, 1, KEY_D),
+	KEY(0, 1, KEY_R),
+	KEY(0, 2, KEY_T),
+	KEY(0, 3, KEY_HOME),
+	KEY(0, 6, KEY_I),
+	KEY(0, 7, KEY_LEFTSHIFT),
+	KEY(1, 0, KEY_D),
 	KEY(1, 1, KEY_F),
-	KEY(2, 1, KEY_G),
-	KEY(3, 1, KEY_SEND),
-	KEY(6, 1, KEY_K),
-	KEY(7, 1, KEY_ENTER),
-	KEY(0, 2, KEY_X),
-	KEY(1, 2, KEY_C),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_SEND),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_ENTER),
+	KEY(2, 0, KEY_X),
+	KEY(2, 1, KEY_C),
 	KEY(2, 2, KEY_V),
-	KEY(3, 2, KEY_END),
-	KEY(6, 2, KEY_DOT),
-	KEY(7, 2, KEY_CAPSLOCK),
-	KEY(0, 3, KEY_Z),
-	KEY(1, 3, KEY_KPPLUS),
-	KEY(2, 3, KEY_B),
+	KEY(2, 3, KEY_END),
+	KEY(2, 6, KEY_DOT),
+	KEY(2, 7, KEY_CAPSLOCK),
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_KPPLUS),
+	KEY(3, 2, KEY_B),
 	KEY(3, 3, KEY_F1),
-	KEY(6, 3, KEY_O),
-	KEY(7, 3, KEY_SPACE),
-	KEY(0, 4, KEY_W),
-	KEY(1, 4, KEY_Y),
-	KEY(2, 4, KEY_U),
-	KEY(3, 4, KEY_F2),
+	KEY(3, 6, KEY_O),
+	KEY(3, 7, KEY_SPACE),
+	KEY(4, 0, KEY_W),
+	KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_U),
+	KEY(4, 3, KEY_F2),
 	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(6, 4, KEY_L),
-	KEY(7, 4, KEY_LEFT),
-	KEY(0, 5, KEY_S),
-	KEY(1, 5, KEY_H),
-	KEY(2, 5, KEY_J),
-	KEY(3, 5, KEY_F3),
+	KEY(4, 6, KEY_L),
+	KEY(4, 7, KEY_LEFT),
+	KEY(5, 0, KEY_S),
+	KEY(5, 1, KEY_H),
+	KEY(5, 2, KEY_J),
+	KEY(5, 3, KEY_F3),
 	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(6, 5, KEY_M),
-	KEY(4, 5, KEY_ENTER),
-	KEY(7, 5, KEY_RIGHT),
-	KEY(0, 6, KEY_Q),
-	KEY(1, 6, KEY_A),
-	KEY(2, 6, KEY_N),
-	KEY(3, 6, KEY_BACKSPACE),
+	KEY(5, 6, KEY_M),
+	KEY(5, 7, KEY_ENTER),
+	KEY(6, 0, KEY_Q),
+	KEY(6, 1, KEY_A),
+	KEY(6, 2, KEY_N),
+	KEY(6, 3, KEY_BACKSPACE),
 	KEY(6, 6, KEY_P),
-	KEY(7, 6, KEY_UP),
 	KEY(6, 7, KEY_SELECT),
-	KEY(7, 7, KEY_DOWN),
-	KEY(0, 7, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(1, 7, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(2, 7, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(3, 7, KEY_PROG4),	/*MACRO 4 <User defined> */
-	0
+	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
+	KEY(7, 5, KEY_RIGHT),
+	KEY(7, 6, KEY_UP),
+	KEY(7, 7, KEY_DOWN)
 };
 
 static struct matrix_keymap_data board_map_data = {

arch/arm/mach-omap2/clock34xx.c

@@ -473,7 +473,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
 	unsigned long fint;
 	u16 f = 0;
 
-	fint = clk->dpll_data->clk_ref->rate / (n + 1);
+	fint = clk->dpll_data->clk_ref->rate / n;
 
 	pr_debug("clock: fint is %lu\n", fint);
 

arch/arm/mach-omap2/clock34xx.h

@@ -489,9 +489,9 @@ static struct clk core_ck = {
 static struct clk dpll3_m2x2_ck = {
 	.name		= "dpll3_m2x2_ck",
 	.ops		= &clkops_null,
-	.parent		= &dpll3_x2_ck,
+	.parent		= &dpll3_m2_ck,
 	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap3_clkoutx2_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */

arch/arm/mach-omap2/gpmc.c

@@ -366,7 +366,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 	if (r < 0)
 		goto out;
 
-	gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1);
+	gpmc_cs_enable_mem(cs, res->start, resource_size(res));
 	*base = res->start;
 	gpmc_cs_set_reserved(cs, 1);
 out:
@@ -378,7 +378,7 @@ EXPORT_SYMBOL(gpmc_cs_request);
 void gpmc_cs_free(int cs)
 {
 	spin_lock(&gpmc_mem_lock);
-	if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) {
+	if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
 		printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
 		BUG();
 		spin_unlock(&gpmc_mem_lock);

arch/arm/mach-omap2/mailbox.c

@@ -300,7 +300,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "invalid mem resource\n");
 		return -ENODEV;
 	}
-	mbox_base = ioremap(res->start, res->end - res->start);
+	mbox_base = ioremap(res->start, resource_size(res));
 	if (!mbox_base)
 		return -ENOMEM;
 

arch/arm/mach-pxa/colibri-pxa320.c

@@ -27,6 +27,7 @@
 #include <mach/colibri.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,8 @@ static void __init colibri_pxa320_init_lcd(void)
 static inline void colibri_pxa320_init_lcd(void) {}
 #endif
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if	defined(CONFIG_SND_AC97_CODEC) || \
+	defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
 	GPIO34_AC97_SYSCLK,
 	GPIO35_AC97_SDATA_IN_0,

arch/arm/mach-pxa/hx4700.c

@@ -604,7 +604,7 @@ static struct platform_device gpio_vbus = {
 static const struct ads7846_platform_data tsc2046_info = {
 	.model            = 7846,
 	.vref_delay_usecs = 100,
-	.pressure_max     = 512,
+	.pressure_max     = 1024,
 	.debounce_max     = 10,
 	.debounce_tol     = 3,
 	.debounce_rep     = 1,

arch/arm/mach-pxa/include/mach/entry-macro.S

@@ -46,5 +46,6 @@
 		beq	1001f
 		bic	\irqstat, \irqstat, #0x80000000
 		mov	\irqnr, \irqstat, lsr #16
+		add	\irqnr, \irqnr, #(PXA_IRQ(0))
 1001:
 		.endm

arch/arm/mach-pxa/irq.c

@@ -25,6 +25,8 @@
 
 #include "generic.h"
 
+#define MAX_INTERNAL_IRQS	128
+
 #define IRQ_BIT(n)	(((n) - PXA_IRQ(0)) & 0x1f)
 #define _ICMR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
 #define _ICLR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
@@ -122,6 +124,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
 	int irq, i;
 
+	BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
+
 	pxa_internal_irq_nr = irq_nr;
 
 	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
@@ -149,7 +153,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 }
 
 #ifdef CONFIG_PM
-static unsigned long saved_icmr[2];
+static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
+static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
 
 static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 {
@@ -159,6 +164,8 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 		saved_icmr[i] = _ICMR(irq);
 		_ICMR(irq) = 0;
 	}
+	for (i = 0; i < pxa_internal_irq_nr; i++)
+		saved_ipr[i] = IPR(i);
 
 	return 0;
 }
@@ -171,6 +178,8 @@ static int pxa_irq_resume(struct sys_device *dev)
 		_ICMR(irq) = saved_icmr[i];
 		_ICLR(irq) = 0;
 	}
+	for (i = 0; i < pxa_internal_irq_nr; i++)
+		IPR(i) = saved_ipr[i];
 
 	ICCR = 1;
 	return 0;

arch/arm/mach-pxa/palmtc.c

@@ -292,10 +292,10 @@ const static unsigned int palmtc_keypad_col_gpios[] = {
 
 static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
 	.keymap_data	= &palmtc_keymap_data,
-	.col_gpios	= palmtc_keypad_row_gpios,
-	.num_col_gpios	= 12,
-	.row_gpios	= palmtc_keypad_col_gpios,
-	.num_row_gpios	= 4,
+	.row_gpios	= palmtc_keypad_row_gpios,
+	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
+	.col_gpios	= palmtc_keypad_col_gpios,
+	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
 	.active_low	= 1,
 
 	.debounce_ms		= 20,

arch/arm/mach-pxa/spitz.c

@@ -779,11 +779,34 @@ static void __init common_init(void)
 	pxa_set_i2c_info(NULL);
 }
 
+#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
+static struct nand_bbt_descr sharpsl_akita_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 1,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+	.eccbytes = 24,
+	.eccpos = {
+		   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
+		   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+		   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
+	.oobfree = {{0x08, 0x09}}
+};
+#endif
+
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 static void __init spitz_init(void)
 {
 	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
+	if (machine_is_borzoi()) {
+		sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
+		sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
+	}
+
 	platform_scoop_config = &spitz_pcmcia_config;
 
 	common_init();
@@ -808,22 +831,6 @@ static struct i2c_board_info akita_i2c_board_info[] = {
 	},
 };
 
-static struct nand_bbt_descr sharpsl_akita_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 1,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
-	.eccbytes = 24,
-	.eccpos = {
-		   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
-		   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-		   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-	.oobfree = {{0x08, 0x09}}
-};
-
 static void __init akita_init(void)
 {
 	spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;

arch/arm/mach-realview/Kconfig

@@ -70,6 +70,8 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView/PBX platform"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET
+	select ZONE_DMA if SPARSEMEM
 	help
 	  Include support for the ARM(R) RealView PBX platform.
 
@@ -82,6 +84,7 @@ config REALVIEW_HIGH_PHYS_OFFSET
 	  0x70000000, 256MB of which being mirrored at 0x00000000. If
 	  the board supports 512MB of RAM, this option allows the
 	  memory to be accessed contiguously at the high physical
-	  offset.
+	  offset. On the PBX board, disabling this option allows 1GB of
+	  RAM to be used with SPARSEMEM.
 
 endmenu

arch/arm/mach-realview/core.c

@@ -59,6 +59,25 @@
 /* used by entry-macro.S and platsmp.c */
 void __iomem *gic_cpu_base_addr;
 
+#ifdef CONFIG_ZONE_DMA
+/*
+ * Adjust the zones if there are restrictions for DMA access.
+ */
+void __init realview_adjust_zones(int node, unsigned long *size,
+				  unsigned long *hole)
+{
+	unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
+
+	if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+		return;
+
+	size[ZONE_NORMAL] = size[0] - dma_size;
+	size[ZONE_DMA] = dma_size;
+	hole[ZONE_NORMAL] = hole[0];
+	hole[ZONE_DMA] = 0;
+}
+#endif
+
 /*
  * This is the RealView sched_clock implementation.  This has
  * a resolution of 41.7ns, and a maximum value of about 179s.
@@ -543,7 +562,7 @@ static int realview_clcd_setup(struct clcd_fb *fb)
 	fb->panel		= realview_clcd_panel();
 
 	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
-						    &dma, GFP_KERNEL);
+						    &dma, GFP_KERNEL | GFP_DMA);
 	if (!fb->fb.screen_base) {
 		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 		return -ENOMEM;
@@ -788,3 +807,24 @@ void __init realview_timer_init(unsigned int timer_irq)
 	realview_clocksource_init();
 	realview_clockevents_init(timer_irq);
 }
+
+/*
+ * Setup the memory banks.
+ */
+void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from,
+		    struct meminfo *meminfo)
+{
+	/*
+	 * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
+	 * Half of this is mirrored at 0.
+	 */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+	meminfo->bank[0].start = 0x70000000;
+	meminfo->bank[0].size = SZ_512M;
+	meminfo->nr_banks = 1;
+#else
+	meminfo->bank[0].start = 0;
+	meminfo->bank[0].size = SZ_256M;
+	meminfo->nr_banks = 1;
+#endif
+}

arch/arm/mach-realview/core.h

@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/io.h>
 
+#include <asm/setup.h>
 #include <asm/leds.h>
 
 #define AMBA_DEVICE(name,busid,base,plat)			\
@@ -44,6 +45,8 @@ static struct amba_device name##_device = {			\
 	/* .dma		= base##_DMA,*/				\
 }
 
+struct machine_desc;
+
 extern struct platform_device realview_flash_device;
 extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
@@ -61,5 +64,8 @@ extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
 extern int realview_usb_register(struct resource *res);
+extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags,
+			   char **from, struct meminfo *meminfo);
 extern void (*realview_reset)(char);
+
 #endif

arch/arm/mach-realview/include/mach/memory.h

@@ -29,4 +29,53 @@
 #define PHYS_OFFSET		UL(0x00000000)
 #endif
 
+#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
+extern void realview_adjust_zones(int node, unsigned long *size,
+				  unsigned long *hole);
+#define arch_adjust_zones(node, size, hole) \
+	realview_adjust_zones(node, size, hole)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
+#endif
+
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * Sparsemem definitions for RealView PBX.
+ *
+ * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
+ * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
+ * may be used for DMA.
+ *
+ * The macros below define a section size of 256MB and a non-linear virtual to
+ * physical mapping:
+ *
+ * 256MB @ 0x00000000 -> PAGE_OFFSET
+ * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
+ * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
+ */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
+#endif
+
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	28
+
+/* bank page offsets */
+#define PAGE_OFFSET1	(PAGE_OFFSET + 0x10000000)
+#define PAGE_OFFSET2	(PAGE_OFFSET + 0x30000000)
+
+#define __phys_to_virt(phys)						\
+	((phys) >= 0x80000000 ?	(phys) - 0x80000000 + PAGE_OFFSET2 :	\
+	 (phys) >= 0x20000000 ?	(phys) - 0x20000000 + PAGE_OFFSET1 :	\
+	 (phys) + PAGE_OFFSET)
+
+#define __virt_to_phys(virt)						\
+	 ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 :	\
+	  (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 :	\
+	  (virt) - PAGE_OFFSET)
+
+#endif	/* CONFIG_SPARSEMEM */
+
 #endif

arch/arm/mach-realview/platsmp.c

@@ -146,11 +146,8 @@ static void __init poke_milo(void)
 	 * register. The BootMonitor waits for this register to become
 	 * non-zero.
 	 */
-#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
 	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
-		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSS_OFFSET);
+		     __io_address(REALVIEW_SYS_FLAGSSET));
 
 	mb();
 }

arch/arm/mach-realview/realview_eb.c

@@ -415,6 +415,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	.phys_io	= REALVIEW_EB_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_fixup,
 	.map_io		= realview_eb_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_eb_timer,

arch/arm/mach-realview/realview_pb1176.c

@@ -300,6 +300,18 @@ static void realview_pb1176_reset(char mode)
 	__raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
 }
 
+static void realview_pb1176_fixup(struct machine_desc *mdesc,
+				  struct tag *tags, char **from,
+				  struct meminfo *meminfo)
+{
+	/*
+	 * RealView PB1176 only has 128MB of RAM mapped at 0.
+	 */
+	meminfo->bank[0].start = 0;
+	meminfo->bank[0].size = SZ_128M;
+	meminfo->nr_banks = 1;
+}
+
 static void __init realview_pb1176_init(void)
 {
 	int i;
@@ -331,6 +343,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	.phys_io	= REALVIEW_PB1176_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_pb1176_fixup,
 	.map_io		= realview_pb1176_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb1176_timer,

arch/arm/mach-realview/realview_pb11mp.c

@@ -347,6 +347,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	.phys_io	= REALVIEW_PB11MP_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_fixup,
 	.map_io		= realview_pb11mp_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb11mp_timer,

arch/arm/mach-realview/realview_pba8.c

@@ -298,6 +298,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	.phys_io	= REALVIEW_PBA8_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_fixup,
 	.map_io		= realview_pba8_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pba8_timer,

arch/arm/mach-realview/realview_pbx.c

@@ -304,6 +304,26 @@ static struct sys_timer realview_pbx_timer = {
 	.init		= realview_pbx_timer_init,
 };
 
+static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
+			       char **from, struct meminfo *meminfo)
+{
+#ifdef CONFIG_SPARSEMEM
+	/*
+	 * Memory configuration with SPARSEMEM enabled on RealView PBX (see
+	 * asm/mach/memory.h for more information).
+	 */
+	meminfo->bank[0].start = 0;
+	meminfo->bank[0].size = SZ_256M;
+	meminfo->bank[1].start = 0x20000000;
+	meminfo->bank[1].size = SZ_512M;
+	meminfo->bank[2].start = 0x80000000;
+	meminfo->bank[2].size = SZ_256M;
+	meminfo->nr_banks = 3;
+#else
+	realview_fixup(mdesc, tags, from, meminfo);
+#endif
+}
+
 static void __init realview_pbx_init(void)
 {
 	int i;
@@ -345,6 +365,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	.phys_io	= REALVIEW_PBX_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_pbx_fixup,
 	.map_io		= realview_pbx_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pbx_timer,

arch/arm/mach-s3c6400/include/mach/dma.h

@@ -58,21 +58,13 @@ enum dma_ch {
 	DMACH_MAX		/* the end */
 };
 
-static __inline__ int s3c_dma_has_circular(void)
+static __inline__ bool s3c_dma_has_circular(void)
 {
-	/* we will be supporting ciruclar buffers as soon as we have DMA
-	 * engine support.
-	 */
-	return 1;
+	return true;
 }
 
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
-static inline bool s3c_dma_has_circular(void)
-{
-	return false;
-}
-
 #include <plat/dma.h>
 
 #endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c6410/Kconfig

@@ -77,6 +77,7 @@ config SMDK6410_WM1190_EV1
 	depends on MACH_SMDK6410
 	select REGULATOR
 	select REGULATOR_WM8350
+	select S3C24XX_GPIO_EXTRA64
 	select MFD_WM8350_I2C
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8350_CONFIG_MODE_3

arch/arm/mach-s3c6410/mach-smdk6410.c

@@ -320,6 +320,9 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
 {
 	int i;
 
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
 	/* Instantiate the regulators */
 	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
 		wm8350_register_regulator(wm8350,

arch/arm/mach-u300/core.c

@@ -408,7 +408,7 @@ static struct platform_device keypad_device = {
 };
 
 static struct platform_device rtc_device = {
-	.name = "rtc0",
+	.name = "rtc-coh901331",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(rtc_resources),
 	.resource = rtc_resources,

arch/arm/mm/proc-v7.S

@@ -186,9 +186,10 @@ cpu_v7_name:
  */
 __v7_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode and
-	orr	r0, r0, #(1 << 6) | (1 << 0)	@ TLB ops broadcasting
-	mcr	p15, 0, r0, c1, c0, 1
+	mrc	p15, 0, r0, c1, c0, 1
+	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
+	orreq	r0, r0, #(1 << 6) | (1 << 0)	@ Enable SMP/nAMP mode and
+	mcreq	p15, 0, r0, c1, c0, 1		@ TLB ops broadcasting
 #endif
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}

arch/arm/plat-omap/cpu-omap.c

@@ -127,7 +127,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	/* FIXME: what's the actual transition time? */
-	policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
+	policy->cpuinfo.transition_latency = 300 * 1000;
 
 	return 0;
 }

arch/arm/plat-omap/dma.c

@@ -691,13 +691,16 @@ static inline void disable_lnk(int lch)
 static inline void omap2_enable_irq_lch(int lch)
 {
 	u32 val;
+	unsigned long flags;
 
 	if (!cpu_class_is_omap2())
 		return;
 
+	spin_lock_irqsave(&dma_chan_lock, flags);
 	val = dma_read(IRQENABLE_L0);
 	val |= 1 << lch;
 	dma_write(val, IRQENABLE_L0);
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
 int omap_request_dma(int dev_id, const char *dev_name,
@@ -799,10 +802,13 @@ void omap_free_dma(int lch)
 
 	if (cpu_class_is_omap2()) {
 		u32 val;
+
+		spin_lock_irqsave(&dma_chan_lock, flags);
 		/* Disable interrupts */
 		val = dma_read(IRQENABLE_L0);
 		val &= ~(1 << lch);
 		dma_write(val, IRQENABLE_L0);
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
 
 		/* Clear the CSR register and IRQ status register */
 		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
@@ -1108,6 +1114,14 @@ int omap_dma_running(void)
 {
 	int lch;
 
+	/*
+	 * On OMAP1510, internal LCD controller will start the transfer
+	 * when it gets enabled, so assume DMA running if LCD enabled.
+	 */
+	if (cpu_is_omap1510())
+		if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
+			return 1;
+
 	/* Check if LCD DMA is running */
 	if (cpu_is_omap16xx())
 		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)

arch/arm/plat-omap/gpio.c

@@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio)
 
 static int check_gpio(int gpio)
 {
-	if (unlikely(gpio_valid(gpio)) < 0) {
+	if (unlikely(gpio_valid(gpio) < 0)) {
 		printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
 		dump_stack();
 		return -1;

arch/arm/plat-pxa/include/plat/mfp.h

@@ -16,7 +16,7 @@
 #ifndef __ASM_PLAT_MFP_H
 #define __ASM_PLAT_MFP_H
 
-#define mfp_to_gpio(m)	((m) % 128)
+#define mfp_to_gpio(m)	((m) % 256)
 
 /* list of all the configurable MFP pins */
 enum {

arch/arm/plat-pxa/mfp.c

@@ -207,7 +207,7 @@ unsigned long mfp_read(int mfp)
 {
 	unsigned long val, flags;
 
-	BUG_ON(mfp >= MFP_PIN_MAX);
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
 	spin_lock_irqsave(&mfp_spin_lock, flags);
 	val = mfpr_readl(mfp_table[mfp].mfpr_off);
@@ -220,7 +220,7 @@ void mfp_write(int mfp, unsigned long val)
 {
 	unsigned long flags;
 
-	BUG_ON(mfp >= MFP_PIN_MAX);
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
 	spin_lock_irqsave(&mfp_spin_lock, flags);
 	mfpr_writel(mfp_table[mfp].mfpr_off, val);

arch/arm/plat-s3c64xx/dma.c

@@ -151,8 +151,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 		src = chan->dev_addr;
 		dst = data;
 		control0 = PL080_CONTROL_SRC_AHB2;
-		control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-		control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
 		control0 |= PL080_CONTROL_DST_INCR;
 		break;
 
@@ -160,8 +158,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 		src = data;
 		dst = chan->dev_addr;
 		control0 = PL080_CONTROL_DST_AHB2;
-		control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
-		control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
 		control0 |= PL080_CONTROL_SRC_INCR;
 		break;
 	default:
@@ -173,6 +169,8 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 	control1 = size >> chan->hw_width;	/* size in no of xfers */
 	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
 	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
+	control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+	control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
 
 	lli->src_addr = src;
 	lli->dst_addr = dst;
@@ -339,6 +337,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 	struct s3c64xx_dma_buff *next;
 	struct s3c64xx_dma_buff *buff;
 	struct pl080s_lli *lli;
+	unsigned long flags;
 	int ret;
 
 	WARN_ON(!chan);
@@ -366,6 +365,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 
 	s3c64xx_dma_fill_lli(chan, lli, data, size);
 
+	local_irq_save(flags);
+
 	if ((next = chan->next) != NULL) {
 		struct s3c64xx_dma_buff *end = chan->end;
 		struct pl080s_lli *endlli = end->lli;
@@ -397,6 +398,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 		s3c64xx_lli_to_regs(chan, lli);
 	}
 
+	local_irq_restore(flags);
+
 	show_lli(lli);
 
 	dbg_showchan(chan);
@@ -560,26 +563,11 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 
 EXPORT_SYMBOL(s3c2410_dma_free);
 
-
-static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
-{
-	struct s3c2410_dma_chan *chan = dmac->channels + offs;
-
-	/* note, we currently do not bother to work out which buffer
-	 * or buffers have been completed since the last tc-irq. */
-
-	if (chan->callback_fn)
-		(chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
-}
-
-static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
-{
-	printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
-}
-
 static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 {
 	struct s3c64xx_dmac *dmac = pw;
+	struct s3c2410_dma_chan *chan;
+	enum s3c2410_dma_buffresult res;
 	u32 tcstat, errstat;
 	u32 bit;
 	int offs;
@@ -588,14 +576,54 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 	errstat = readl(dmac->regs + PL080_ERR_STATUS);
 
 	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+		struct s3c64xx_dma_buff *buff;
+
+		if (!(errstat & bit) && !(tcstat & bit))
+			continue;
+
+		chan = dmac->channels + offs;
+		res = S3C2410_RES_ERR;
+
 		if (tcstat & bit) {
 			writel(bit, dmac->regs + PL080_TC_CLEAR);
-			s3c64xx_dma_tcirq(dmac, offs);
+			res = S3C2410_RES_OK;
 		}
 
-		if (errstat & bit) {
-			s3c64xx_dma_errirq(dmac, offs);
+		if (errstat & bit)
 			writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+		/* 'next' points to the buffer that is next to the
+		 * currently active buffer.
+		 * For CIRCULAR queues, 'next' will be same as 'curr'
+		 * when 'end' is the active buffer.
+		 */
+		buff = chan->curr;
+		while (buff && buff != chan->next
+				&& buff->next != chan->next)
+			buff = buff->next;
+
+		if (!buff)
+			BUG();
+
+		if (buff == chan->next)
+			buff = chan->end;
+
+		s3c64xx_dma_bufffdone(chan, buff, res);
+
+		/* Free the node and update curr, if non-circular queue */
+		if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
+			chan->curr = buff->next;
+			s3c64xx_dma_freebuff(buff);
+		}
+
+		/* Update 'next' */
+		buff = chan->next;
+		if (chan->next == chan->end) {
+			chan->next = chan->curr;
+			if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
+				chan->end = NULL;
+		} else {
+			chan->next = buff->next;
 		}
 	}
 

arch/m32r/Kconfig

@@ -11,6 +11,9 @@ config M32R
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select INIT_ALL_POSSIBLE
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
 
 config SBUS
 	bool

arch/m32r/boot/compressed/Makefile

@@ -1,11 +1,11 @@
 #
-# linux/arch/sh/boot/compressed/Makefile
+# linux/arch/m32r/boot/compressed/Makefile
 #
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
-		   piggy.o vmlinux.lds
+targets		:= vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
+		   vmlinux.bin.lzma head.o misc.o piggy.o vmlinux.lds
 
 OBJECTS = $(obj)/head.o $(obj)/misc.o
 
@@ -27,6 +27,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
 CFLAGS_misc.o += -fpic
 
 ifdef CONFIG_MMU
@@ -37,5 +43,9 @@ endif
 
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+suffix_$(CONFIG_KERNEL_GZIP)	= gz
+suffix_$(CONFIG_KERNEL_BZIP2)	= bz2
+suffix_$(CONFIG_KERNEL_LZMA)	= lzma
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
 	$(call if_changed,ld)

arch/m32r/boot/compressed/misc.c

@@ -9,140 +9,49 @@
  * Adapted for SH by Stuart Menefy, Aug 1999
  *
  * 2003-02-12:	Support M32R by Takeo Takahashi
- * 		This is based on arch/sh/boot/compressed/misc.c.
  */
 
-#include <linux/string.h>
-
 /*
  * gzip declarations
  */
-
-#define OF(args)  args
 #define STATIC static
 
 #undef memset
 #undef memcpy
 #define memzero(s, n)     memset ((s), 0, (n))
 
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-static unsigned insize = 0;  /* valid bytes in inbuf */
-static unsigned inptr = 0;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int  fill_inbuf(void);
-static void flush_window(void);
 static void error(char *m);
 
-static unsigned char *input_data;
-static int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
 #include "m32r_sio.c"
 
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
-#define HEAP_SIZE             0x10000
-
-#include "../../../../lib/inflate.c"
-
-void* memset(void* s, int c, size_t n)
+#ifdef CONFIG_KERNEL_BZIP2
+static void *memset(void *s, int c, size_t n)
 {
-	int i;
-	char *ss = (char*)s;
+	char *ss = s;
 
-	for (i=0;i<n;i++) ss[i] = c;
+	while (n--)
+	       	*ss++ = c;
 	return s;
 }
+#endif
 
-void* memcpy(void* __dest, __const void* __src,
-			    size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i=0;i<__n;i++) d[i] = s[i];
-	return __dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	if (insize != 0) {
-		error("ran out of input data");
-	}
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
-}
+#ifdef CONFIG_KERNEL_GZIP
+#define BOOT_HEAP_SIZE             0x10000
+#include "../../../../lib/decompress_inflate.c"
+#endif
 
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
+#ifdef CONFIG_KERNEL_BZIP2
+#define BOOT_HEAP_SIZE             0x400000
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
 
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
-}
+#ifdef CONFIG_KERNEL_LZMA
+#define BOOT_HEAP_SIZE             0x10000
+#include "../../../../lib/decompress_unlzma.c"
+#endif
 
 static void error(char *x)
 {
@@ -153,20 +62,20 @@ static void error(char *x)
 	while(1);	/* Halt */
 }
 
-/* return decompressed size */
 void
 decompress_kernel(int mmu_on, unsigned char *zimage_data,
 		  unsigned int zimage_len, unsigned long heap)
 {
+	unsigned char *input_data = zimage_data;
+	int input_len = zimage_len;
+	unsigned char *output_data;
+
 	output_data = (unsigned char *)CONFIG_MEMORY_START + 0x2000
 		+ (mmu_on ? 0x80000000 : 0);
 	free_mem_ptr = heap;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-	input_data = zimage_data;
-	input_len = zimage_len;
+	free_mem_end_ptr = free_mem_ptr + BOOT_HEAP_SIZE;
 
-	makecrc();
-	puts("Uncompressing Linux... ");
-	gunzip();
-	puts("Ok, booting the kernel.\n");
+	puts("\nDecompressing Linux... ");
+	decompress(input_data, input_len, NULL, NULL, output_data, NULL, error);
+	puts("done.\nBooting the kernel.\n");
 }

arch/m32r/kernel/smp.c

@@ -806,7 +806,7 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num,
 
 	if (mask & ~physids_coerce(phys_cpu_present_map))
 		BUG();
-	if (ipi_num >= NR_IPIS)
+	if (ipi_num >= NR_IPIS || ipi_num < 0)
 		BUG();
 
 	mask <<= IPI_SHIFT;

arch/m32r/kernel/time.c

@@ -75,7 +75,7 @@ u32 arch_gettimeoffset(void)
 		count = 0;
 
 	count = (latch - count) * TICK_SIZE;
-	elapsed_time = (count + latch / 2) / latch;
+	elapsed_time = DIV_ROUND_CLOSEST(count, latch);
 	/* NOTE: LATCH is equal to the "interval" value (= reload count). */
 
 #else /* CONFIG_SMP */
@@ -93,7 +93,7 @@ u32 arch_gettimeoffset(void)
 	p_count = count;
 
 	count = (latch - count) * TICK_SIZE;
-	elapsed_time = (count + latch / 2) / latch;
+	elapsed_time = DIV_ROUND_CLOSEST(count, latch);
 	/* NOTE: LATCH is equal to the "interval" value (= reload count). */
 #endif /* CONFIG_SMP */
 #elif defined(CONFIG_CHIP_M32310)
@@ -211,7 +211,7 @@ void __init time_init(void)
 
 		bus_clock = boot_cpu_data.bus_clock;
 		divide = boot_cpu_data.timer_divide;
-		latch = (bus_clock/divide + HZ / 2) / HZ;
+		latch = DIV_ROUND_CLOSEST(bus_clock/divide, HZ);
 
 		printk("Timer start : latch = %ld\n", latch);
 

arch/m32r/kernel/vmlinux.lds.S

@@ -42,6 +42,8 @@ SECTIONS
   _etext = .;			/* End of text section */
 
   EXCEPTION_TABLE(16)
+  NOTES
+
   RODATA
   RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
   _edata = .;			/* End of data section */

arch/mips/Kconfig

@@ -1,6 +1,7 @@
 config MIPS
 	bool
 	default y
+	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB

arch/mips/bcm47xx/prom.c

@@ -100,7 +100,7 @@ static __init void prom_init_console(void)
 
 static __init void prom_init_cmdline(void)
 {
-	char buf[CL_SIZE];
+	static char buf[CL_SIZE] __initdata;
 
 	/* Get the kernel command line from CFE */
 	if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) {

arch/mips/configs/rbtx49xx_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Wed Mar  4 23:08:06 2009
+# Linux kernel version: 2.6.32-rc6
+# Sun Nov  8 22:59:47 2009
 #
 CONFIG_MIPS=y
 
@@ -9,16 +9,18 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_NXP_STB220 is not set
 # CONFIG_NXP_STB225 is not set
@@ -45,6 +47,7 @@ CONFIG_MACH_TX49XX=y
 # CONFIG_WR_PPMC is not set
 # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
 # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 CONFIG_MACH_TXX9=y
 CONFIG_TOSHIBA_RBTX4927=y
 CONFIG_TOSHIBA_RBTX4938=y
@@ -86,7 +89,6 @@ CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -101,7 +103,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -137,6 +139,7 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
@@ -154,7 +157,10 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -175,6 +181,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -194,11 +201,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -209,8 +217,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -220,25 +232,35 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 # CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
+CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -246,8 +268,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -274,6 +296,7 @@ CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 
 #
@@ -288,6 +311,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 CONFIG_NET=y
@@ -295,7 +319,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -311,6 +334,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -336,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -347,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -365,9 +389,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -376,9 +400,9 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -414,16 +438,20 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # Mapping drivers for chip access
 #
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
+CONFIG_MTD_RBTX4939=y
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -435,7 +463,15 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_TXX9NDFMC=m
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -471,6 +507,7 @@ CONFIG_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -534,8 +571,13 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
@@ -574,6 +616,8 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NE2000=y
@@ -602,18 +646,15 @@ CONFIG_TC35815=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -653,6 +694,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_TXX9=y
@@ -666,7 +708,9 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TX4939=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -686,6 +730,10 @@ CONFIG_SPI_TXX9=y
 # SPI Protocol Masters
 #
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 
@@ -701,17 +749,22 @@ CONFIG_GPIOLIB=y
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -740,28 +793,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -772,7 +814,42 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_TXX9ACLC=m
+CONFIG_HAS_TXX9_ACLC=y
+CONFIG_SND_SOC_TXX9ACLC_AC97=m
+CONFIG_SND_SOC_TXX9ACLC_GENERIC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -783,6 +860,8 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
 
 #
 # LED Triggers
@@ -792,7 +871,12 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -820,6 +904,7 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 # CONFIG_RTC_DRV_R9701 is not set
 CONFIG_RTC_DRV_RS5C348=y
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -840,8 +925,26 @@ CONFIG_RTC_DRV_DS1742=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_TX4939=y
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_TXX9_DMAC=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -853,9 +956,10 @@ CONFIG_RTC_DRV_TX4939=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -865,6 +969,10 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -890,7 +998,27 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_HFSPLUS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -922,6 +1050,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -929,11 +1058,9 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
@@ -946,6 +1073,7 @@ CONFIG_CMDLINE=""
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -959,6 +1087,10 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/mips/include/asm/dma-mapping.h

@@ -3,6 +3,7 @@
 
 #include <asm/scatterlist.h>
 #include <asm/cache.h>
+#include <asm-generic/dma-coherent.h>
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t flag);
@@ -73,14 +74,4 @@ extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr);
 extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	       enum dma_data_direction direction);
 
-#if 0
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-
-extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-	dma_addr_t device_addr, size_t size, int flags);
-extern void dma_release_declared_memory(struct device *dev);
-extern void * dma_mark_declared_memory_occupied(struct device *dev,
-	dma_addr_t device_addr, size_t size);
-#endif
-
 #endif /* _ASM_DMA_MAPPING_H */

arch/mips/kernel/cevt-smtc.c

@@ -173,11 +173,12 @@ void smtc_distribute_timer(int vpe)
 	unsigned int mtflags;
 	int cpu;
 	struct clock_event_device *cd;
-	unsigned long nextstamp = 0L;
+	unsigned long nextstamp;
 	unsigned long reference;
 
 
 repeat:
+	nextstamp = 0L;
 	for_each_online_cpu(cpu) {
 	    /*
 	     * Find virtual CPUs within the current VPE who have

arch/mips/math-emu/cp1emu.c

@@ -163,33 +163,34 @@ static int isBranchInstr(mips_instruction * i)
 
 /*
  * In the Linux kernel, we support selection of FPR format on the
- * basis of the Status.FR bit.  This does imply that, if a full 32
- * FPRs are desired, there needs to be a flip-flop that can be written
- * to one at that bit position.  In any case, O32 MIPS ABI uses
- * only the even FPRs (Status.FR = 0).
+ * basis of the Status.FR bit.  If an FPU is not present, the FR bit
+ * is hardwired to zero, which would imply a 32-bit FPU even for
+ * 64-bit CPUs.  For 64-bit kernels with no FPU we use TIF_32BIT_REGS
+ * as a proxy for the FR bit so that a 64-bit FPU is emulated.  In any
+ * case, for a 32-bit kernel which uses the O32 MIPS ABI, only the
+ * even FPRs are used (Status.FR = 0).
  */
-
-#define CP0_STATUS_FR_SUPPORT
-
-#ifdef CP0_STATUS_FR_SUPPORT
-#define FR_BIT ST0_FR
+static inline int cop1_64bit(struct pt_regs *xcp)
+{
+	if (cpu_has_fpu)
+		return xcp->cp0_status & ST0_FR;
+#ifdef CONFIG_64BIT
+	return !test_thread_flag(TIF_32BIT_REGS);
 #else
-#define FR_BIT 0
+	return 0;
 #endif
+}
+
+#define SIFROMREG(si, x) ((si) = cop1_64bit(xcp) || !(x & 1) ? \
+			(int)ctx->fpr[x] : (int)(ctx->fpr[x & ~1] >> 32))
 
-#define SIFROMREG(si, x) ((si) = \
-			(xcp->cp0_status & FR_BIT) || !(x & 1) ? \
-			(int)ctx->fpr[x] : \
-			(int)(ctx->fpr[x & ~1] >> 32 ))
-#define SITOREG(si, x)	(ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] = \
-			(xcp->cp0_status & FR_BIT) || !(x & 1) ? \
+#define SITOREG(si, x)	(ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = \
+			cop1_64bit(xcp) || !(x & 1) ? \
 			ctx->fpr[x & ~1] >> 32 << 32 | (u32)(si) : \
 			ctx->fpr[x & ~1] << 32 >> 32 | (u64)(si) << 32)
 
-#define DIFROMREG(di, x) ((di) = \
-			ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)])
-#define DITOREG(di, x)	(ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] \
-			= (di))
+#define DIFROMREG(di, x) ((di) = ctx->fpr[x & ~(cop1_64bit(xcp) == 0)])
+#define DITOREG(di, x)	(ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = (di))
 
 #define SPFROMREG(sp, x) SIFROMREG((sp).bits, x)
 #define SPTOREG(sp, x)	SITOREG((sp).bits, x)

arch/mips/mm/dma-default.c

@@ -90,6 +90,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 {
 	void *ret;
 
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
+
 	gfp = massage_gfp_flags(dev, gfp);
 
 	ret = (void *) __get_free_pages(gfp, get_order(size));
@@ -122,6 +125,10 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
 	dma_addr_t dma_handle)
 {
 	unsigned long addr = (unsigned long) vaddr;
+	int order = get_order(size);
+
+	if (dma_release_from_coherent(dev, order, vaddr))
+		return;
 
 	plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
 

arch/mips/mti-malta/malta-memory.c

@@ -54,7 +54,8 @@ static struct prom_pmemblock * __init prom_getmdesc(void)
 {
 	char *memsize_str;
 	unsigned int memsize;
-	char cmdline[CL_SIZE], *ptr;
+	char *ptr;
+	static char cmdline[CL_SIZE] __initdata;
 
 	/* otherwise look in the environment */
 	memsize_str = prom_getenv("memsize");

arch/mips/rb532/prom.c

@@ -69,7 +69,7 @@ static inline unsigned long tag2ul(char *arg, const char *tag)
 
 void __init prom_setup_cmdline(void)
 {
-	char cmd_line[CL_SIZE];
+	static char cmd_line[CL_SIZE] __initdata;
 	char *cp, *board;
 	int prom_argc;
 	char **prom_argv, **prom_envp;

arch/mips/txx9/generic/setup.c

@@ -160,7 +160,7 @@ static void __init prom_init_cmdline(void)
 	int argc;
 	int *argv32;
 	int i;			/* Always ignore the "-c" at argv[0] */
-	char builtin[CL_SIZE];
+	static char builtin[CL_SIZE] __initdata;
 
 	if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
 		/*
@@ -315,7 +315,7 @@ static inline void txx9_cache_fixup(void)
 
 static void __init preprocess_cmdline(void)
 {
-	char cmdline[CL_SIZE];
+	static char cmdline[CL_SIZE] __initdata;
 	char *s;
 
 	strcpy(cmdline, arcs_cmdline);

arch/parisc/include/asm/fcntl.h

@@ -28,8 +28,6 @@
 #define F_SETOWN	12	/*  for sockets. */
 #define F_SETSIG	13	/*  for sockets. */
 #define F_GETSIG	14	/*  for sockets. */
-#define F_GETOWN_EX	15
-#define F_SETOWN_EX	16
 
 /* for posix fcntl() and lockf() */
 #define F_RDLCK		01

arch/powerpc/Kconfig

@@ -414,6 +414,10 @@ config ARCH_SPARSEMEM_DEFAULT
 config ARCH_POPULATES_NODE_MAP
 	def_bool y
 
+config SYS_SUPPORTS_HUGETLBFS
+       def_bool y
+       depends on PPC_BOOK3S_64
+
 source "mm/Kconfig"
 
 config ARCH_MEMORY_PROBE

arch/powerpc/boot/addRamDisk.c

@@ -58,7 +58,7 @@ static int check_elf64(void *p, int size, struct addr_range *r)
 
 	return 64;
 }
-void get4k(FILE *file, char *buf )
+static void get4k(FILE *file, char *buf )
 {
 	unsigned j;
 	unsigned num = fread(buf, 1, 4096, file);
@@ -66,12 +66,12 @@ void get4k(FILE *file, char *buf )
 		buf[j] = 0;
 }
 
-void put4k(FILE *file, char *buf )
+static void put4k(FILE *file, char *buf )
 {
 	fwrite(buf, 1, 4096, file);
 }
 
-void death(const char *msg, FILE *fdesc, const char *fname) 
+static void death(const char *msg, FILE *fdesc, const char *fname)
 {
 	fprintf(stderr, msg);
 	fclose(fdesc);

arch/powerpc/boot/dts/mpc8377_wlan.dts

@@ -67,7 +67,7 @@
 			device-width = <1>;
 
 			partition@0 {
-				reg = <0 0x8000>;
+				reg = <0 0x80000>;
 				label = "u-boot";
 				read-only;
 			};

arch/powerpc/boot/dts/mpc8569mds.dts

@@ -487,8 +487,8 @@
 				 &qe_pio_f 5 0   /* USBTN */
 				 &qe_pio_f 6 0   /* USBRP */
 				 &qe_pio_f 8 0   /* USBRN */
-				 &bcsr17   6 0   /* SPEED */
-				 &bcsr17   5 1>; /* POWER */
+				 &bcsr17   1 0   /* SPEED */
+				 &bcsr17   2 0>; /* POWER */
 		};
 
 		enet0: ucc@2000 {

arch/powerpc/boot/dts/sbc8548.dts

@@ -26,8 +26,7 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
-		/* pci1 doesn't have a corresponding physical connector */
-		pci2 = &pci2;
+		pci1 = &pci1;
 	};
 
 	cpus {
@@ -381,7 +380,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
-		clock-frequency = <66666666>;
+		clock-frequency = <66000000>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -390,7 +389,7 @@
 		device_type = "pci";
 	};
 
-	pci2: pcie@e000a000 {
+	pci1: pcie@e000a000 {
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -403,9 +402,9 @@
 		interrupt-parent = <&mpic>;
 		interrupts = <0x1a 0x2>;
 		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>;
-		clock-frequency = <33333333>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
+		clock-frequency = <33000000>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -419,11 +418,11 @@
 			device_type = "pci";
 			ranges = <0x02000000 0x0 0xa0000000
 				  0x02000000 0x0 0xa0000000
-				  0x0 0x20000000
+				  0x0 0x10000000
 
 				  0x01000000 0x0 0x00000000
 				  0x01000000 0x0 0x00000000
-				  0x0 0x08000000>;
+				  0x0 0x00800000>;
 		};
 	};
 };

arch/powerpc/configs/83xx/asp8347_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:02 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:20 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -85,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -125,28 +127,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -274,6 +278,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -425,9 +432,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
@@ -628,7 +635,9 @@ CONFIG_MII=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -658,10 +667,7 @@ CONFIG_GIANFAR=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -760,6 +766,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -814,9 +821,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -834,6 +838,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -883,6 +892,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -894,7 +904,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -934,6 +943,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -944,6 +954,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -990,6 +1001,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1045,6 +1057,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1146,6 +1159,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1215,7 +1229,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1327,6 +1340,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1344,6 +1358,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_PPC_DISABLE_WERROR is not set
@@ -1365,7 +1380,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1407,11 +1421,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/powerpc/configs/83xx/kmeter1_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:03 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:21 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -86,11 +87,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -119,20 +121,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -140,6 +141,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -250,6 +253,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -267,6 +271,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -348,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=m
@@ -396,9 +402,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -565,18 +571,16 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -663,6 +667,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -693,9 +698,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -713,7 +715,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -732,6 +733,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -784,6 +786,7 @@ CONFIG_UIO=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -854,7 +857,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -926,6 +928,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -942,6 +945,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_PPC_DISABLE_WERROR is not set

arch/powerpc/configs/83xx/mpc8313_rdb_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:04 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:22 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -124,28 +126,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -273,6 +277,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -427,9 +434,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -488,6 +495,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -605,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -643,7 +652,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
@@ -741,9 +752,11 @@ CONFIG_E100=y
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -791,10 +804,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -896,6 +906,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -950,9 +961,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -984,6 +992,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -1036,6 +1049,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1048,9 +1062,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1088,8 +1100,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -1099,6 +1113,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1112,7 +1127,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1164,6 +1178,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
@@ -1255,6 +1270,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
@@ -1273,6 +1289,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
@@ -1334,6 +1351,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1384,6 +1402,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1453,7 +1472,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1569,6 +1587,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1586,6 +1605,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1604,10 +1624,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1630,10 +1652,10 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1660,7 +1682,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1702,11 +1723,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/powerpc/configs/83xx/mpc8315_rdb_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:05 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -124,28 +126,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -273,6 +277,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -427,9 +434,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -488,6 +495,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -605,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -644,11 +653,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -671,6 +683,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -698,6 +711,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -802,9 +816,11 @@ CONFIG_E100=y
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -852,10 +868,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -957,6 +970,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -1011,9 +1025,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1045,6 +1056,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -1097,6 +1113,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1109,9 +1126,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1149,8 +1164,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -1160,6 +1177,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1173,7 +1191,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1225,6 +1242,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
@@ -1316,6 +1334,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
@@ -1334,6 +1353,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
@@ -1395,6 +1415,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1445,6 +1466,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1514,7 +1536,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1630,6 +1651,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1647,6 +1669,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1665,10 +1688,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1691,10 +1716,10 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1721,7 +1746,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1763,11 +1787,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/powerpc/configs/83xx/mpc832x_mds_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:06 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:24 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -124,28 +126,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -274,6 +278,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -504,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -542,7 +550,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
@@ -612,7 +622,9 @@ CONFIG_MII=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -635,7 +647,6 @@ CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -663,10 +674,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -759,6 +767,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -812,9 +821,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -832,6 +838,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -881,6 +892,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -892,9 +904,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -927,6 +937,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -937,6 +948,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -950,7 +962,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1070,6 +1081,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1128,7 +1140,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1202,6 +1213,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1219,6 +1231,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_PPC_DISABLE_WERROR is not set
@@ -1240,7 +1253,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1282,11 +1294,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/powerpc/configs/83xx/mpc832x_rdb_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:07 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:24 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -124,28 +126,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -274,6 +278,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -507,6 +514,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -545,7 +553,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
@@ -617,7 +627,9 @@ CONFIG_MII=y
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -640,7 +652,6 @@ CONFIG_E1000=y
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -668,10 +679,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -776,6 +784,7 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -830,9 +839,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -863,6 +869,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -915,6 +926,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -927,9 +939,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -967,8 +977,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -978,6 +990,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -991,7 +1004,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1043,6 +1055,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
@@ -1146,6 +1159,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MMC_CB710 is not set
@@ -1186,6 +1201,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1247,7 +1263,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1365,6 +1380,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1382,6 +1398,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_PPC_DISABLE_WERROR is not set
@@ -1403,7 +1420,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1445,11 +1461,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/powerpc/configs/83xx/mpc834x_itx_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:07 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -124,28 +126,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -273,6 +277,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -424,9 +431,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -483,6 +490,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -637,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -676,11 +685,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -703,6 +715,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -730,6 +743,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -845,10 +859,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -930,6 +941,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -984,9 +996,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_PCF8574=y
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1017,7 +1026,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1055,8 +1063,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -1066,6 +1076,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1111,6 +1122,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
@@ -1238,6 +1250,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1288,6 +1301,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1350,7 +1364,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1465,6 +1478,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1482,6 +1496,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_PPC_DISABLE_WERROR is not set
@@ -1503,7 +1518,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1545,11 +1559,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:08 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:26 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -124,28 +126,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -273,6 +277,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -424,9 +431,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -483,6 +490,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -589,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -627,7 +636,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
@@ -725,10 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -810,6 +818,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -864,9 +873,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_PCF8574=y
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -897,7 +903,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -935,8 +940,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -946,6 +953,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -991,6 +999,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
@@ -1059,6 +1068,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1117,6 +1127,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1167,6 +1178,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1229,7 +1241,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1344,6 +1355,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1361,6 +1373,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_PPC_DISABLE_WERROR is not set
@@ -1382,7 +1395,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1424,11 +1436,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/powerpc/configs/83xx/mpc834x_mds_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:09 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:27 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -124,28 +126,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -273,6 +277,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -556,9 +563,11 @@ CONFIG_E100=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -606,10 +615,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -699,6 +705,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -752,9 +759,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -772,6 +776,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -821,6 +830,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -832,9 +842,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -867,6 +875,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -877,6 +886,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -890,7 +900,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1010,6 +1019,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1068,7 +1078,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1140,6 +1149,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1157,6 +1167,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_PPC_DISABLE_WERROR is not set
@@ -1178,7 +1189,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1220,11 +1230,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/powerpc/configs/83xx/mpc836x_mds_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov  5 08:20:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -124,28 +126,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -255,6 +258,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -272,6 +276,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -367,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -396,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -403,7 +410,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -416,6 +422,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -423,9 +430,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -585,6 +592,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -623,7 +631,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
@@ -693,7 +703,9 @@ CONFIG_MII=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -716,7 +728,6 @@ CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -744,10 +755,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -840,6 +848,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -893,9 +902,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -913,6 +919,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -962,6 +973,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -973,9 +985,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1008,6 +1018,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -1018,6 +1029,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1031,7 +1043,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1151,6 +1162,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1210,7 +1222,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1284,6 +1295,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1301,6 +1313,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_PPC_DISABLE_WERROR is not set
@@ -1322,7 +1335,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1364,11 +1376,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set