Merge branch 'topic/asoc' into for-linus

Documentation/ABI/stable/sysfs-driver-usb-usbtmc

@@ -1,5 +1,5 @@
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -12,8 +12,8 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -27,7 +27,7 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -40,7 +40,7 @@ Description:
 		sent to the device or not.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -51,7 +51,7 @@ Description:
 		published by the USB-IF.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:

Documentation/ABI/testing/sysfs-block-rssd

@@ -0,0 +1,18 @@
+What:           /sys/block/rssd*/registers
+Date:           March 2012
+KernelVersion:  3.3
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:    This is a read-only file. Dumps below driver information and
+                hardware registers.
+                    - S ACTive
+                    - Command Issue
+                    - Allocated
+                    - Completed
+                    - PORT IRQ STAT
+                    - HOST IRQ STAT
+
+What:           /sys/block/rssd*/status
+Date:           April 2012
+KernelVersion:  3.4
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:   This is a read-only file. Indicates the status of the device.

Documentation/ABI/testing/sysfs-bus-hsi

@@ -0,0 +1,19 @@
+What:		/sys/bus/hsi
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:
+		High Speed Synchronous Serial Interface (HSI) is a
+		serial interface mainly used for connecting application
+		engines (APE) with cellular modem engines (CMT) in cellular
+		handsets.
+		The bus will be populated with devices (hsi_clients) representing
+		the protocols available in the system. Bus drivers implement
+		those protocols.
+
+What:		/sys/bus/hsi/devices/.../modalias
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: hsi:<hsi_client device name>

Documentation/ABI/testing/sysfs-cfq-target-latency

@@ -0,0 +1,8 @@
+What:		/sys/block/<device>/iosched/target_latency
+Date:		March 2012
+contact:	Tao Ma <boyu.mt@taobao.com>
+Description:
+		The /sys/block/<device>/iosched/target_latency only exists
+		when the user sets cfq to /sys/block/<device>/scheduler.
+		It contains an estimated latency time for the cfq. cfq will
+		use it to calculate the time slice used for every task.

Documentation/DMA-attributes.txt

@@ -31,3 +31,21 @@ may be weakly ordered, that is that reads and writes may pass each other.
 Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING,
 those that do not will simply ignore the attribute and exhibit default
 behavior.
+
+DMA_ATTR_WRITE_COMBINE
+----------------------
+
+DMA_ATTR_WRITE_COMBINE specifies that writes to the mapping may be
+buffered to improve performance.
+
+Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE,
+those that do not will simply ignore the attribute and exhibit default
+behavior.
+
+DMA_ATTR_NON_CONSISTENT
+-----------------------
+
+DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either
+consistent or non-consistent memory as it sees fit.  By using this API,
+you are guaranteeing to the platform that you have all the correct and
+necessary sync points for this memory in the driver.

Documentation/DocBook/device-drivers.tmpl

@@ -446,4 +446,21 @@ X!Idrivers/video/console/fonts.c
 !Edrivers/i2c/i2c-core.c
   </chapter>
 
+  <chapter id="hsi">
+     <title>High Speed Synchronous Serial Interface (HSI)</title>
+
+     <para>
+	High Speed Synchronous Serial Interface (HSI) is a
+	serial interface mainly used for connecting application
+	engines (APE) with cellular modem engines (CMT) in cellular
+	handsets.
+
+	HSI provides multiplexing for up to 16 logical channels,
+	low-latency and full duplex communication.
+     </para>
+
+!Iinclude/linux/hsi/hsi.h
+!Edrivers/hsi/hsi.c
+  </chapter>
+
 </book>

Documentation/DocBook/media/v4l/pixfmt-nv12m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-NV12M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-YUV420M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

Documentation/cgroups/cpusets.txt

@@ -217,7 +217,7 @@ and name space for cpusets, with a minimum of additional kernel code.
 
 The cpus and mems files in the root (top_cpuset) cpuset are
 read-only.  The cpus file automatically tracks the value of
-cpu_online_map using a CPU hotplug notifier, and the mems file
+cpu_online_mask using a CPU hotplug notifier, and the mems file
 automatically tracks the value of node_states[N_HIGH_MEMORY]--i.e.,
 nodes with memory--using the cpuset_track_online_nodes() hook.
 

Documentation/cgroups/memory.txt

@@ -34,8 +34,7 @@ Current Status: linux-2.6.34-mmotm(development version of 2010/April)
 
 Features:
  - accounting anonymous pages, file caches, swap caches usage and limiting them.
- - private LRU and reclaim routine. (system's global LRU and private LRU
-   work independently from each other)
+ - pages are linked to per-memcg LRU exclusively, and there is no global LRU.
  - optionally, memory+swap usage can be accounted and limited.
  - hierarchical accounting
  - soft limit
@@ -154,7 +153,7 @@ updated. page_cgroup has its own LRU on cgroup.
 2.2.1 Accounting details
 
 All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
-Some pages which are never reclaimable and will not be on the global LRU
+Some pages which are never reclaimable and will not be on the LRU
 are not accounted. We just account pages under usual VM management.
 
 RSS pages are accounted at page_fault unless they've already been accounted

Documentation/cpu-hotplug.txt

@@ -47,7 +47,7 @@ maxcpus=n    Restrict boot time cpus to n. Say if you have 4 cpus, using
              other cpus later online, read FAQ's for more info.
 
 additional_cpus=n (*)	Use this to limit hotpluggable cpus. This option sets
-  			cpu_possible_map = cpu_present_map + additional_cpus
+  			cpu_possible_mask = cpu_present_mask + additional_cpus
 
 cede_offline={"off","on"}  Use this option to disable/enable putting offlined
 		            processors to an extended H_CEDE state on
@@ -64,11 +64,11 @@ should only rely on this to count the # of cpus, but *MUST* not rely
 on the apicid values in those tables for disabled apics. In the event
 BIOS doesn't mark such hot-pluggable cpus as disabled entries, one could
 use this parameter "additional_cpus=x" to represent those cpus in the
-cpu_possible_map.
+cpu_possible_mask.
 
 possible_cpus=n		[s390,x86_64] use this to set hotpluggable cpus.
 			This option sets possible_cpus bits in
-			cpu_possible_map. Thus keeping the numbers of bits set
+			cpu_possible_mask. Thus keeping the numbers of bits set
 			constant even if the machine gets rebooted.
 
 CPU maps and such
@@ -76,7 +76,7 @@ CPU maps and such
 [More on cpumaps and primitive to manipulate, please check
 include/linux/cpumask.h that has more descriptive text.]
 
-cpu_possible_map: Bitmap of possible CPUs that can ever be available in the
+cpu_possible_mask: Bitmap of possible CPUs that can ever be available in the
 system. This is used to allocate some boot time memory for per_cpu variables
 that aren't designed to grow/shrink as CPUs are made available or removed.
 Once set during boot time discovery phase, the map is static, i.e no bits
@@ -84,13 +84,13 @@ are added or removed anytime.  Trimming it accurately for your system needs
 upfront can save some boot time memory. See below for how we use heuristics
 in x86_64 case to keep this under check.
 
-cpu_online_map: Bitmap of all CPUs currently online. Its set in __cpu_up()
+cpu_online_mask: Bitmap of all CPUs currently online. Its set in __cpu_up()
 after a cpu is available for kernel scheduling and ready to receive
 interrupts from devices. Its cleared when a cpu is brought down using
 __cpu_disable(), before which all OS services including interrupts are
 migrated to another target CPU.
 
-cpu_present_map: Bitmap of CPUs currently present in the system. Not all
+cpu_present_mask: Bitmap of CPUs currently present in the system. Not all
 of them may be online. When physical hotplug is processed by the relevant
 subsystem (e.g ACPI) can change and new bit either be added or removed
 from the map depending on the event is hot-add/hot-remove. There are currently
@@ -99,22 +99,22 @@ at which time hotplug is disabled.
 
 You really dont need to manipulate any of the system cpu maps. They should
 be read-only for most use. When setting up per-cpu resources almost always use
-cpu_possible_map/for_each_possible_cpu() to iterate.
+cpu_possible_mask/for_each_possible_cpu() to iterate.
 
 Never use anything other than cpumask_t to represent bitmap of CPUs.
 
 	#include <linux/cpumask.h>
 
-	for_each_possible_cpu     - Iterate over cpu_possible_map
-	for_each_online_cpu       - Iterate over cpu_online_map
-	for_each_present_cpu      - Iterate over cpu_present_map
+	for_each_possible_cpu     - Iterate over cpu_possible_mask
+	for_each_online_cpu       - Iterate over cpu_online_mask
+	for_each_present_cpu      - Iterate over cpu_present_mask
 	for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask.
 
 	#include <linux/cpu.h>
 	get_online_cpus() and put_online_cpus():
 
 The above calls are used to inhibit cpu hotplug operations. While the
-cpu_hotplug.refcount is non zero, the cpu_online_map will not change.
+cpu_hotplug.refcount is non zero, the cpu_online_mask will not change.
 If you merely need to avoid cpus going away, you could also use
 preempt_disable() and preempt_enable() for those sections.
 Just remember the critical section cannot call any

Documentation/devicetree/bindings/ata/calxeda-sata.txt → Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -1,10 +1,10 @@
-* Calxeda SATA Controller
+* AHCI SATA Controller
 
 SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
+- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
@@ -14,4 +14,3 @@ Example:
                 reg = <0xffe08000 0x1000>;
                 interrupts = <115>;
         };
-

Documentation/devicetree/bindings/mtd/atmel-nand.txt

@@ -27,13 +27,13 @@ nand0: nand@40000000,0 {
 	reg = <0x40000000 0x10000000
 	       0xffffe800 0x200
 	      >;
-	atmel,nand-addr-offset = <21>;
-	atmel,nand-cmd-offset = <22>;
+	atmel,nand-addr-offset = <21>;	/* ale */
+	atmel,nand-cmd-offset = <22>;	/* cle */
 	nand-on-flash-bbt;
 	nand-ecc-mode = "soft";
-	gpios = <&pioC 13 0
-		 &pioC 14 0
-		 0
+	gpios = <&pioC 13 0	/* rdy */
+		 &pioC 14 0 	/* nce */
+		 0		/* cd */
 		>;
 	partition@0 {
 		...

Documentation/devicetree/bindings/regulator/anatop-regulator.txt

@@ -0,0 +1,29 @@
+Anatop Voltage regulators
+
+Required properties:
+- compatible: Must be "fsl,anatop-regulator"
+- anatop-reg-offset: Anatop MFD register offset
+- anatop-vol-bit-shift: Bit shift for the register
+- anatop-vol-bit-width: Number of bits used in the register
+- anatop-min-bit-val: Minimum value of this register
+- anatop-min-voltage: Minimum voltage of this regulator
+- anatop-max-voltage: Maximum voltage of this regulator
+
+Any property defined as part of the core regulator
+binding, defined in regulator.txt, can also be used.
+
+Example:
+
+	regulator-vddpu {
+		compatible = "fsl,anatop-regulator";
+		regulator-name = "vddpu";
+		regulator-min-microvolt = <725000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		anatop-reg-offset = <0x140>;
+		anatop-vol-bit-shift = <9>;
+		anatop-vol-bit-width = <5>;
+		anatop-min-bit-val = <1>;
+		anatop-min-voltage = <725000>;
+		anatop-max-voltage = <1300000>;
+	};

Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt

@@ -0,0 +1,49 @@
+Freescale i.MX audio complex with SGTL5000 codec
+
+Required properties:
+- compatible : "fsl,imx-audio-sgtl5000"
+- model : The user-visible name of this sound complex
+- ssi-controller : The phandle of the i.MX SSI controller
+- audio-codec : The phandle of the SGTL5000 audio codec
+- audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names could be power
+  supplies, SGTL5000 pins, and the jacks on the board:
+
+  Power supplies:
+   * Mic Bias
+
+  SGTL5000 pins:
+   * MIC_IN
+   * LINE_IN
+   * HP_OUT
+   * LINE_OUT
+
+  Board connectors:
+   * Mic Jack
+   * Line In Jack
+   * Headphone Jack
+   * Line Out Jack
+   * Ext Spk
+
+- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port : The external port of the i.MX audio muxer
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx51-babbage-sgtl5000",
+		     "fsl,imx-audio-sgtl5000";
+	model = "imx51-babbage-sgtl5000";
+	ssi-controller = <&ssi1>;
+	audio-codec = <&sgtl5000>;
+	audio-routing =
+		"MIC_IN", "Mic Jack",
+		"Mic Jack", "Mic Bias",
+		"Headphone Jack", "HP_OUT";
+	mux-int-port = <1>;
+	mux-ext-port = <3>;
+};

Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt

@@ -0,0 +1,17 @@
+* Freescale MXS audio complex with SGTL5000 codec
+
+Required properties:
+- compatible: "fsl,mxs-audio-sgtl5000"
+- model: The user-visible name of this sound complex
+- saif-controllers: The phandle list of the MXS SAIF controller
+- audio-codec: The phandle of the SGTL5000 audio codec
+
+Example:
+
+sound {
+	compatible = "fsl,imx28-evk-sgtl5000",
+		     "fsl,mxs-audio-sgtl5000";
+	model = "imx28-evk-sgtl5000";
+	saif-controllers = <&saif0 &saif1>;
+	audio-codec = <&sgtl5000>;
+};

Documentation/devicetree/bindings/sound/mxs-saif.txt

@@ -0,0 +1,36 @@
+* Freescale MXS Serial Audio Interface (SAIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-saif"
+- reg: Should contain registers location and length
+- interrupts: Should contain ERROR and DMA interrupts
+- fsl,saif-dma-channel: APBX DMA channel for the SAIF
+
+Optional properties:
+- fsl,saif-master: phandle to the master SAIF.  It's only required for
+  the slave SAIF.
+
+Note: Each SAIF controller should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+
+aliases {
+	saif0 = &saif0;
+	saif1 = &saif1;
+};
+
+saif0: saif@80042000 {
+	compatible = "fsl,imx28-saif";
+	reg = <0x80042000 2000>;
+	interrupts = <59 80>;
+	fsl,saif-dma-channel = <4>;
+};
+
+saif1: saif@80046000 {
+	compatible = "fsl,imx28-saif";
+	reg = <0x80046000 2000>;
+	interrupts = <58 81>;
+	fsl,saif-dma-channel = <5>;
+	fsl,saif-master = <&saif0>;
+};

Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt

@@ -0,0 +1,32 @@
+NVIDIA Tegra30 AHUB (Audio Hub)
+
+Required properties:
+- compatible : "nvidia,tegra30-ahub"
+- reg : Should contain the register physical address and length for each of
+  the AHUB's APBIF registers and the AHUB's own registers.
+- interrupts : Should contain AHUB interrupt
+- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
+  request selector for the first APBIF channel.
+- ranges : The bus address mapping for the configlink register bus.
+  Can be empty since the mapping is 1:1.
+- #address-cells : For the configlink bus. Should be <1>;
+- #size-cells : For the configlink bus. Should be <1>.
+
+AHUB client modules need to specify the IDs of their CIFs (Client InterFaces).
+For RX CIFs, the numbers indicate the register number within AHUB routing
+register space (APBIF 0..3 RX, I2S 0..5 RX, DAM 0..2 RX 0..1, SPDIF RX 0..1).
+For TX CIFs, the numbers indicate the bit position within the AHUB routing
+registers (APBIF 0..3 TX, I2S 0..5 TX, DAM 0..2 TX, SPDIF TX 0..1).
+
+Example:
+
+ahub@70080000 {
+	compatible = "nvidia,tegra30-ahub";
+	reg = <0x70080000 0x200 0x70080200 0x100>;
+	interrupts = < 0 103 0x04 >;
+	nvidia,dma-request-selector = <&apbdma 1>;
+
+	ranges;
+	#address-cells = <1>;
+	#size-cells = <1>;
+};

Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt

@@ -0,0 +1,15 @@
+NVIDIA Tegra30 I2S controller
+
+Required properties:
+- compatible : "nvidia,tegra30-i2s"
+- reg : Should contain I2S registers location and length
+- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
+  first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
+
+Example:
+
+i2s@70002800 {
+	compatible = "nvidia,tegra30-i2s";
+	reg = <0x70080300 0x100>;
+	nvidia,ahub-cif-ids = <4 4>;
+};

Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt

@@ -0,0 +1,14 @@
+NVIDIA Tegra audio complex for TrimSlice
+
+Required properties:
+- compatible : "nvidia,tegra-audio-trimslice"
+- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
+- nvidia,audio-codec : The phandle of the WM8903 audio codec
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-trimslice";
+	nvidia,i2s-controller = <&tegra_i2s1>;
+	nvidia,audio-codec = <&codec>;
+};

Documentation/feature-removal-schedule.txt

@@ -6,14 +6,6 @@ be removed from this file.
 
 ---------------------------
 
-What:	x86 floppy disable_hlt
-When:	2012
-Why:	ancient workaround of dubious utility clutters the
-	code used by everybody else.
-Who:	Len Brown <len.brown@intel.com>
-
----------------------------
-
 What:	CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle
 When:	2012
 Why:	This optional sub-feature of APM is of dubious reliability,
@@ -539,3 +531,11 @@ Why:	There appear to be no production users of the get_robust_list syscall,
 	of ASLR. It was only ever intended for debugging, so it should be
 	removed.
 Who:	Kees Cook <keescook@chromium.org>
+
+----------------------------
+
+What:	setitimer accepts user NULL pointer (value)
+When:	3.6
+Why:	setitimer is not returning -EFAULT if user pointer is NULL. This
+	violates the spec.
+Who:	Sasikantha Babu <sasikanth.v19@gmail.com>

Documentation/filesystems/vfs.txt

@@ -114,7 +114,7 @@ members are defined:
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        struct dentry (*mount) (struct file_system_type *, int,
+        struct dentry *(*mount) (struct file_system_type *, int,
                        const char *, void *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;

Documentation/hwmon/k10temp

@@ -11,7 +11,7 @@ Supported chips:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
 * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
 * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
-* AMD Family 15h processors: "Bulldozer"
+* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity"
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space

Documentation/ioctl/ioctl-number.txt

@@ -225,6 +225,7 @@ Code  Seq#(hex)	Include File		Comments
 'j'	00-3F	linux/joystick.h
 'k'	00-0F	linux/spi/spidev.h	conflict!
 'k'	00-05	video/kyro.h		conflict!
+'k'	10-17	linux/hsi/hsi_char.h	HSI character device
 'l'	00-3F	linux/tcfs_fs.h		transparent cryptographic file system
 					<http://web.archive.org/web/*/http://mikonos.dia.unisa.it/tcfs>
 'l'	40-7F	linux/udf_fs_i.h	in development:

Documentation/networking/driver.txt

@@ -2,16 +2,16 @@ Document about softnet driver issues
 
 Transmit path guidelines:
 
-1) The hard_start_xmit method must never return '1' under any
-   normal circumstances.  It is considered a hard error unless
+1) The ndo_start_xmit method must not return NETDEV_TX_BUSY under
+   any normal circumstances.  It is considered a hard error unless
    there is no way your device can tell ahead of time when it's
    transmit function will become busy.
 
    Instead it must maintain the queue properly.  For example,
    for a driver implementing scatter-gather this means:
 
-	static int drv_hard_start_xmit(struct sk_buff *skb,
-		   		       struct net_device *dev)
+	static netdev_tx_t drv_hard_start_xmit(struct sk_buff *skb,
+					       struct net_device *dev)
 	{
 		struct drv *dp = netdev_priv(dev);
 
@@ -23,7 +23,7 @@ Transmit path guidelines:
 			unlock_tx(dp);
 			printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
 			       dev->name);
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 
 		... queue packet to card ...
@@ -35,6 +35,7 @@ Transmit path guidelines:
 		...
 		unlock_tx(dp);
 		...
+		return NETDEV_TX_OK;
 	}
 
    And then at the end of your TX reclamation event handling:
@@ -58,15 +59,12 @@ Transmit path guidelines:
             TX_BUFFS_AVAIL(dp) > 0)
 		netif_wake_queue(dp->dev);
 
-2) Do not forget to update netdev->trans_start to jiffies after
-   each new tx packet is given to the hardware.
-
-3) A hard_start_xmit method must not modify the shared parts of a
+2) An ndo_start_xmit method must not modify the shared parts of a
    cloned SKB.
 
-4) Do not forget that once you return 0 from your hard_start_xmit
-   method, it is your driver's responsibility to free up the SKB
-   and in some finite amount of time.
+3) Do not forget that once you return NETDEV_TX_OK from your
+   ndo_start_xmit method, it is your driver's responsibility to free
+   up the SKB and in some finite amount of time.
 
    For example, this means that it is not allowed for your TX
    mitigation scheme to let TX packets "hang out" in the TX
@@ -74,8 +72,9 @@ Transmit path guidelines:
    This error can deadlock sockets waiting for send buffer room
    to be freed up.
 
-   If you return 1 from the hard_start_xmit method, you must not keep
-   any reference to that SKB and you must not attempt to free it up.
+   If you return NETDEV_TX_BUSY from the ndo_start_xmit method, you
+   must not keep any reference to that SKB and you must not attempt
+   to free it up.
 
 Probing guidelines:
 
@@ -85,10 +84,10 @@ Probing guidelines:
 
 Close/stop guidelines:
 
-1) After the dev->stop routine has been called, the hardware must
+1) After the ndo_stop routine has been called, the hardware must
    not receive or transmit any data.  All in flight packets must
    be aborted. If necessary, poll or wait for completion of 
    any reset commands.
 
-2) The dev->stop routine will be called by unregister_netdevice
+2) The ndo_stop routine will be called by unregister_netdevice
    if device is still UP.

Documentation/networking/ip-sysctl.txt

@@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
 	Possible values are [-31, 31], inclusive.
-	Default: 2
+	Default: 1
 
 tcp_allowed_congestion_control - STRING
 	Show/set the congestion control choices available to non-privileged
@@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 4MB, depending on RAM size.
+	Default: between 87380B and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).
@@ -604,15 +604,8 @@ IP Variables:
 ip_local_port_range - 2 INTEGERS
 	Defines the local port range that is used by TCP and UDP to
 	choose the local port. The first number is the first, the
-	second the last local port number. Default value depends on
-	amount of memory available on the system:
-	> 128Mb 32768-61000
-	< 128Mb 1024-4999 or even less.
-	This number defines number of active connections, which this
-	system can issue simultaneously to systems not supporting
-	TCP extensions (timestamps). With tcp_tw_recycle enabled
-	(i.e. by default) range 1024-4999 is enough to issue up to
-	2000 connections per second to systems supporting timestamps.
+	second the last local port number. The default values are
+	32768 and 61000 respectively.
 
 ip_local_reserved_ports - list of comma separated ranges
 	Specify the ports which are reserved for known third-party

Documentation/networking/netdevices.txt

@@ -47,26 +47,25 @@ packets is preferred.
 
 struct net_device synchronization rules
 =======================================
-dev->open:
+ndo_open:
 	Synchronization: rtnl_lock() semaphore.
 	Context: process
 
-dev->stop:
+ndo_stop:
 	Synchronization: rtnl_lock() semaphore.
 	Context: process
-	Note1: netif_running() is guaranteed false
-	Note2: dev->poll() is guaranteed to be stopped
+	Note: netif_running() is guaranteed false
 
-dev->do_ioctl:
+ndo_do_ioctl:
 	Synchronization: rtnl_lock() semaphore.
 	Context: process
 
-dev->get_stats:
+ndo_get_stats:
 	Synchronization: dev_base_lock rwlock.
 	Context: nominally process, but don't sleep inside an rwlock
 
-dev->hard_start_xmit:
-	Synchronization: netif_tx_lock spinlock.
+ndo_start_xmit:
+	Synchronization: __netif_tx_lock spinlock.
 
 	When the driver sets NETIF_F_LLTX in dev->features this will be
 	called without holding netif_tx_lock. In this case the driver
@@ -87,20 +86,20 @@ dev->hard_start_xmit:
 	o NETDEV_TX_LOCKED Locking failed, please retry quickly.
 	  Only valid when NETIF_F_LLTX is set.
 
-dev->tx_timeout:
-	Synchronization: netif_tx_lock spinlock.
+ndo_tx_timeout:
+	Synchronization: netif_tx_lock spinlock; all TX queues frozen.
 	Context: BHs disabled
 	Notes: netif_queue_stopped() is guaranteed true
 
-dev->set_rx_mode:
-	Synchronization: netif_tx_lock spinlock.
+ndo_set_rx_mode:
+	Synchronization: netif_addr_lock spinlock.
 	Context: BHs disabled
 
 struct napi_struct synchronization rules
 ========================================
 napi->poll:
 	Synchronization: NAPI_STATE_SCHED bit in napi->state.  Device
-		driver's dev->close method will invoke napi_disable() on
+		driver's ndo_stop method will invoke napi_disable() on
 		all NAPI instances which will do a sleeping poll on the
 		NAPI_STATE_SCHED napi->state bit, waiting for all pending
 		NAPI activity to cease.

Documentation/power/freezing-of-tasks.txt

@@ -9,7 +9,7 @@ architectures).
 
 II. How does it work?
 
-There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE
+There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
 and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
 PF_NOFREEZE unset (all user space processes and some kernel threads) are
 regarded as 'freezable' and treated in a special way before the system enters a
@@ -17,30 +17,31 @@ suspend state as well as before a hibernation image is created (in what follows
 we only consider hibernation, but the description also applies to suspend).
 
 Namely, as the first step of the hibernation procedure the function
-freeze_processes() (defined in kernel/power/process.c) is called.  It executes
-try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and
-either wakes them up, if they are kernel threads, or sends fake signals to them,
-if they are user space processes.  A task that has TIF_FREEZE set, should react
-to it by calling the function called __refrigerator() (defined in
-kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
-to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
-Then, we say that the task is 'frozen' and therefore the set of functions
-handling this mechanism is referred to as 'the freezer' (these functions are
-defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
-User space processes are generally frozen before kernel threads.
+freeze_processes() (defined in kernel/power/process.c) is called.  A system-wide
+variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate
+whether the system is to undergo a freezing operation. And freeze_processes()
+sets this variable.  After this, it executes try_to_freeze_tasks() that sends a
+fake signal to all user space processes, and wakes up all the kernel threads.
+All freezable tasks must react to that by calling try_to_freeze(), which
+results in a call to __refrigerator() (defined in kernel/freezer.c), which sets
+the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes
+it loop until PF_FROZEN is cleared for it. Then, we say that the task is
+'frozen' and therefore the set of functions handling this mechanism is referred
+to as 'the freezer' (these functions are defined in kernel/power/process.c,
+kernel/freezer.c & include/linux/freezer.h). User space processes are generally
+frozen before kernel threads.
 
 __refrigerator() must not be called directly.  Instead, use the
 try_to_freeze() function (defined in include/linux/freezer.h), that checks
-the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the
-flag is set.
+if the task is to be frozen and makes the task enter __refrigerator().
 
 For user space processes try_to_freeze() is called automatically from the
 signal-handling code, but the freezable kernel threads need to call it
 explicitly in suitable places or use the wait_event_freezable() or
 wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
-that combine interruptible sleep with checking if TIF_FREEZE is set and calling
-try_to_freeze().  The main loop of a freezable kernel thread may look like the
-following one:
+that combine interruptible sleep with checking if the task is to be frozen and
+calling try_to_freeze().  The main loop of a freezable kernel thread may look
+like the following one:
 
 	set_freezable();
 	do {
@@ -53,7 +54,7 @@ following one:
 (from drivers/usb/core/hub.c::hub_thread()).
 
 If a freezable kernel thread fails to call try_to_freeze() after the freezer has
-set TIF_FREEZE for it, the freezing of tasks will fail and the entire
+initiated a freezing operation, the freezing of tasks will fail and the entire
 hibernation operation will be cancelled.  For this reason, freezable kernel
 threads must call try_to_freeze() somewhere or use one of the
 wait_event_freezable() and wait_event_freezable_timeout() macros.

Documentation/security/keys.txt

@@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW
 
 The key service provides a number of features besides keys:
 
- (*) The key service defines two special key types:
+ (*) The key service defines three special key types:
 
      (+) "keyring"
 
@@ -137,6 +137,18 @@ The key service provides a number of features besides keys:
 	 blobs of data. These can be created, updated and read by userspace,
 	 and aren't intended for use by kernel services.
 
+     (+) "logon"
+
+	 Like a "user" key, a "logon" key has a payload that is an arbitrary
+	 blob of data. It is intended as a place to store secrets which are
+	 accessible to the kernel but not to userspace programs.
+
+	 The description can be arbitrary, but must be prefixed with a non-zero
+	 length string that describes the key "subclass". The subclass is
+	 separated from the rest of the description by a ':'. "logon" keys can
+	 be created and updated from userspace, but the payload is only
+	 readable from kernel space.
+
  (*) Each process subscribes to three keyrings: a thread-specific keyring, a
      process-specific keyring, and a session-specific keyring.
 

Documentation/usb/URB.txt

@@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it
 they will get a -EPERM error.  Thus you can be sure that when
 usb_kill_urb() returns, the URB is totally idle.
 
+There is a lifetime issue to consider.  An URB may complete at any
+time, and the completion handler may free the URB.  If this happens
+while usb_unlink_urb or usb_kill_urb is running, it will cause a
+memory-access violation.  The driver is responsible for avoiding this,
+which often means some sort of lock will be needed to prevent the URB
+from being deallocated while it is still in use.
+
+On the other hand, since usb_unlink_urb may end up calling the
+completion handler, the handler must not take any lock that is held
+when usb_unlink_urb is invoked.  The general solution to this problem
+is to increment the URB's reference count while holding the lock, then
+drop the lock and call usb_unlink_urb or usb_kill_urb, and then
+decrement the URB's reference count.  You increment the reference
+count by calling
+
+	struct urb *usb_get_urb(struct urb *urb)
+
+(ignore the return value; it is the same as the argument) and
+decrement the reference count by calling usb_free_urb.  Of course,
+none of this is necessary if there's no danger of the URB being freed
+by the completion handler.
+
 
 1.7. What about the completion handler?
 

Documentation/usb/usbmon.txt

@@ -183,10 +183,10 @@ An input control transfer to get a port status.
 d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
 d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
 
-An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
-to a storage device at address 5:
+An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
+Bulk wrapper to a storage device at address 5:
 
-dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000
+dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
 dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
 
 * Raw binary format and API

MAINTAINERS

@@ -228,7 +228,7 @@ M:	Len Brown <lenb@kernel.org>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 Q:	http://patchwork.kernel.org/project/linux-acpi/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
 S:	Supported
 F:	drivers/acpi/
 F:	drivers/pnp/pnpacpi/
@@ -1251,7 +1251,6 @@ ATHEROS ATH5K WIRELESS DRIVER
 M:	Jiri Slaby <jirislaby@gmail.com>
 M:	Nick Kossifidis <mickflemm@gmail.com>
 M:	"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
-M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath5k
@@ -1522,8 +1521,8 @@ M:	Gustavo Padovan <gustavo@padovan.org>
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
 S:	Maintained
 F:	drivers/bluetooth/
 
@@ -1533,8 +1532,8 @@ M:	Gustavo Padovan <gustavo@padovan.org>
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
 S:	Maintained
 F:	net/bluetooth/
 F:	include/net/bluetooth/
@@ -1969,10 +1968,9 @@ S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
-M:	Dave Jones <davej@redhat.com>
+M:	Rafael J. Wysocki <rjw@sisk.pl>
 L:	cpufreq@vger.kernel.org
-W:	http://www.codemonkey.org.uk/projects/cpufreq/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
+L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
@@ -2322,9 +2320,9 @@ S:	Supported
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-M:	Randy Dunlap <rdunlap@xenotime.net>
+M:	Rob Landley <rob@landley.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt http://xenotime.net/kernel-doc-patches/current/
+T:	TBD
 S:	Maintained
 F:	Documentation/
 
@@ -2451,17 +2449,17 @@ F:	fs/ecryptfs/
 
 EDAC-CORE
 M:	Doug Thompson <dougthompson@xmission.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Supported
 F:	Documentation/edac.txt
-F:	drivers/edac/edac_*
+F:	drivers/edac/
 F:	include/linux/edac.h
 
 EDAC-AMD64
 M:	Doug Thompson <dougthompson@xmission.com>
 M:	Borislav Petkov <borislav.petkov@amd.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Supported
 F:	drivers/edac/amd64_edac*
@@ -2469,35 +2467,35 @@ F:	drivers/edac/amd64_edac*
 EDAC-E752X
 M:	Mark Gross <mark.gross@intel.com>
 M:	Doug Thompson <dougthompson@xmission.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e752x_edac.c
 
 EDAC-E7XXX
 M:	Doug Thompson <dougthompson@xmission.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
 
 EDAC-I82443BXGX
 M:	Tim Small <tim@buttersideup.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
 
 EDAC-I3000
 M:	Jason Uhlenkott <juhlenko@akamai.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i3000_edac.c
 
 EDAC-I5000
 M:	Doug Thompson <dougthompson@xmission.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5000_edac.c
@@ -2526,21 +2524,21 @@ F:	drivers/edac/i7core_edac.c
 EDAC-I82975X
 M:	Ranganathan Desikan <ravi@jetztechnologies.com>
 M:	"Arvind R." <arvino55@gmail.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82975x_edac.c
 
 EDAC-PASEMI
 M:	Egor Martovetsky <egor@pasemi.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/pasemi_edac.c
 
 EDAC-R82600
 M:	Tim Small <tim@buttersideup.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/r82600_edac.c
@@ -3557,17 +3555,13 @@ L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	arch/x86/platform/mrst/pmu.*
 
-INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
+INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT
+M:	Stanislav Yakovlev <stas.yakovlev@gmail.com>
 L:	linux-wireless@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/networking/README.ipw2100
-F:	drivers/net/wireless/ipw2x00/ipw2100.*
-
-INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
 F:	Documentation/networking/README.ipw2200
-F:	drivers/net/wireless/ipw2x00/ipw2200.*
+F:	drivers/net/wireless/ipw2x00/
 
 INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
 M:	Joseph Cihula <joseph.cihula@intel.com>
@@ -3597,6 +3591,7 @@ S:	Supported
 F:	drivers/net/wireless/iwlegacy/
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
+M:	Johannes Berg <johannes.berg@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
@@ -4041,6 +4036,7 @@ F:	Documentation/scsi/53c700.txt
 F:	drivers/scsi/53c700*
 
 LED SUBSYSTEM
+M:	Bryan Wu <bryan.wu@canonical.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/leds/
@@ -4314,6 +4310,13 @@ W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
 S:	Maintained
 
+MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
+M:	Mirko Lindner <mlindner@marvell.com>
+M:	Stephen Hemminger <shemminger@vyatta.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/marvell/sk*
+
 MARVELL LIBERTAS WIRELESS DRIVER
 M:	Dan Williams <dcbw@redhat.com>
 L:	libertas-dev@lists.infradead.org
@@ -4344,12 +4347,6 @@ M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Odd Fixes
 F:	drivers/mmc/host/mvsdio.*
 
-MARVELL YUKON / SYSKONNECT DRIVER
-M:	Mirko Lindner <mlindner@syskonnect.de>
-M:	Ralph Roesler <rroesler@syskonnect.de>
-W:	http://www.syskonnect.com
-S:	Supported
-
 MATROX FRAMEBUFFER DRIVER
 L:	linux-fbdev@vger.kernel.org
 S:	Orphan
@@ -4537,8 +4534,7 @@ S:	Supported
 F:	drivers/net/ethernet/myricom/myri10ge/
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-M:	Tim Hockin <thockin@hockin.org>
-S:	Maintained
+S:	Orphan
 F:	drivers/net/ethernet/natsemi/natsemi.c
 
 NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
@@ -5122,6 +5118,11 @@ F:	drivers/i2c/busses/i2c-pca-*
 F:	include/linux/i2c-algo-pca.h
 F:	include/linux/i2c-pca-platform.h
 
+PCDP - PRIMARY CONSOLE AND DEBUG PORT
+M:	Khalid Aziz <khalid.aziz@hp.com>
+S:	Maintained
+F:	drivers/firmware/pcdp.*
+
 PCI ERROR RECOVERY
 M:     Linas Vepstas <linasvepstas@gmail.com>
 L:	linux-pci@vger.kernel.org
@@ -5643,7 +5644,7 @@ M:	Ohad Ben-Cohen <ohad@wizery.com>
 S:	Maintained
 F:	drivers/remoteproc/
 F:	Documentation/remoteproc.txt
-F:	include/linux/remoteproc.txt
+F:	include/linux/remoteproc.h
 
 RFKILL
 M:	Johannes Berg <johannes@sipsolutions.net>
@@ -5891,11 +5892,11 @@ F:	Documentation/scsi/st.txt
 F:	drivers/scsi/st*
 
 SCTP PROTOCOL
-M:	Vlad Yasevich <vladislav.yasevich@hp.com>
+M:	Vlad Yasevich <vyasevich@gmail.com>
 M:	Sridhar Samudrala <sri@us.ibm.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	Documentation/networking/sctp.txt
 F:	include/linux/sctp.h
 F:	include/net/sctp/
@@ -6122,12 +6123,6 @@ W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 S:	Maintained
 F:	drivers/usb/misc/sisusbvga/
 
-SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-M:	Stephen Hemminger <shemminger@vyatta.com>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/marvell/sk*
-
 SLAB ALLOCATOR
 M:	Christoph Lameter <cl@linux-foundation.org>
 M:	Pekka Enberg <penberg@kernel.org>
@@ -6293,6 +6288,15 @@ F:	drivers/tty/serial/sunsu.c
 F:	drivers/tty/serial/sunzilog.c
 F:	drivers/tty/serial/sunzilog.h
 
+SPARSE CHECKER
+M:	"Christopher Li" <sparse@chrisli.org>
+L:	linux-sparse@vger.kernel.org
+W:	https://sparse.wiki.kernel.org/
+T:	git git://git.kernel.org/pub/scm/devel/sparse/sparse.git
+T:	git git://git.kernel.org/pub/scm/devel/sparse/chrisl/sparse.git
+S:	Maintained
+F:	include/linux/compiler.h
+
 SPEAR PLATFORM SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
 L:	spear-devel@list.st.com
@@ -6468,6 +6472,7 @@ S:	Odd Fixes
 F:	drivers/staging/olpc_dcon/
 
 STAGING - OZMO DEVICES USB OVER WIFI DRIVER
+M:	Rupesh Gujare <rgujare@ozmodevices.com>
 M:	Chris Kelly <ckelly@ozmodevices.com>
 S:	Maintained
 F:	drivers/staging/ozwpan/
@@ -6665,6 +6670,12 @@ F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
+TI LM49xxx FAMILY ASoC CODEC DRIVERS
+M:	M R Swami Reddy <mr.swami.reddy@ti.com>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
+F:	sound/soc/codecs/lm49453*
+
 TI TWL4030 SERIES SOC CODEC DRIVER
 M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -7574,8 +7585,8 @@ F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
 XILINX AXI ETHERNET DRIVER
-M:	Ariane Keller <ariane.keller@tik.ee.ethz.ch>
-M:	Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
+M:	Anirudha Sarangi <anirudh@xilinx.com>
+M:	John Linn <John.Linn@xilinx.com>
 S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -477,7 +477,7 @@ config ALPHA_BROKEN_IRQ_MASK
 
 config VGA_HOSE
 	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI
+	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
 	default y
 	help
 	  Support VGA on an arbitrary hose; needed for several platforms

arch/alpha/include/asm/atomic.h

@@ -3,6 +3,7 @@
 
 #include <linux/types.h>
 #include <asm/barrier.h>
+#include <asm/cmpxchg.h>
 
 /*
  * Atomic operations that C can't guarantee us.  Useful for
@@ -168,73 +169,6 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 	return result;
 }
 
-/*
- * Atomic exchange routines.
- */
-
-#define __ASM__MB
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
-#include <asm/xchg.h>
-
-#define xchg_local(ptr,x)						\
-  ({									\
-     __typeof__(*(ptr)) _x_ = (x);					\
-     (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
-  })
-
-#define cmpxchg_local(ptr, o, n)					\
-  ({									\
-     __typeof__(*(ptr)) _o_ = (o);					\
-     __typeof__(*(ptr)) _n_ = (n);					\
-     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
-					  (unsigned long)_n_,		\
-					  sizeof(*(ptr)));		\
-  })
-
-#define cmpxchg64_local(ptr, o, n)					\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-  })
-
-#ifdef CONFIG_SMP
-#undef __ASM__MB
-#define __ASM__MB	"\tmb\n"
-#endif
-#undef ____xchg
-#undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
-#include <asm/xchg.h>
-
-#define xchg(ptr,x)							\
-  ({									\
-     __typeof__(*(ptr)) _x_ = (x);					\
-     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
-				 sizeof(*(ptr)));			\
-  })
-
-#define cmpxchg(ptr, o, n)						\
-  ({									\
-     __typeof__(*(ptr)) _o_ = (o);					\
-     __typeof__(*(ptr)) _n_ = (n);					\
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		\
-				    (unsigned long)_n_,	sizeof(*(ptr)));\
-  })
-
-#define cmpxchg64(ptr, o, n)						\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
-  })
-
-#undef __ASM__MB
-#undef ____cmpxchg
-
-#define __HAVE_ARCH_CMPXCHG 1
-
 #define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
 #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
 

arch/alpha/include/asm/cmpxchg.h

@@ -0,0 +1,71 @@
+#ifndef _ALPHA_CMPXCHG_H
+#define _ALPHA_CMPXCHG_H
+
+/*
+ * Atomic exchange routines.
+ */
+
+#define __ASM__MB
+#define ____xchg(type, args...)		__xchg ## type ## _local(args)
+#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
+#include <asm/xchg.h>
+
+#define xchg_local(ptr, x)						\
+({									\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
+				       sizeof(*(ptr)));			\
+})
+
+#define cmpxchg_local(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
+					  (unsigned long)_n_,		\
+					  sizeof(*(ptr)));		\
+})
+
+#define cmpxchg64_local(ptr, o, n)					\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+})
+
+#ifdef CONFIG_SMP
+#undef __ASM__MB
+#define __ASM__MB	"\tmb\n"
+#endif
+#undef ____xchg
+#undef ____cmpxchg
+#define ____xchg(type, args...)		__xchg ##type(args)
+#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
+#include <asm/xchg.h>
+
+#define xchg(ptr, x)							\
+({									\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
+				 sizeof(*(ptr)));			\
+})
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
+				    (unsigned long)_n_,	sizeof(*(ptr)));\
+})
+
+#define cmpxchg64(ptr, o, n)						\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+})
+
+#undef __ASM__MB
+#undef ____cmpxchg
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#endif /* _ALPHA_CMPXCHG_H */

arch/alpha/include/asm/dma-mapping.h

@@ -12,16 +12,22 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 
 #include <asm-generic/dma-mapping-common.h>
 
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t gfp)
+#define dma_alloc_coherent(d,s,h,f)	dma_alloc_attrs(d,s,h,f,NULL)
+
+static inline void *dma_alloc_attrs(struct device *dev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t gfp,
+				    struct dma_attrs *attrs)
 {
-	return get_dma_ops(dev)->alloc_coherent(dev, size, dma_handle, gfp);
+	return get_dma_ops(dev)->alloc(dev, size, dma_handle, gfp, attrs);
 }
 
-static inline void dma_free_coherent(struct device *dev, size_t size,
-				     void *vaddr, dma_addr_t dma_handle)
+#define dma_free_coherent(d,s,c,h) dma_free_attrs(d,s,c,h,NULL)
+
+static inline void dma_free_attrs(struct device *dev, size_t size,
+				  void *vaddr, dma_addr_t dma_handle,
+				  struct dma_attrs *attrs)
 {
-	get_dma_ops(dev)->free_coherent(dev, size, vaddr, dma_handle);
+	get_dma_ops(dev)->free(dev, size, vaddr, dma_handle, attrs);
 }
 
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)

arch/alpha/include/asm/rtc.h

@@ -1,14 +1,10 @@
 #ifndef _ALPHA_RTC_H
 #define _ALPHA_RTC_H
 
-#if defined(CONFIG_ALPHA_GENERIC)
+#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
+ || defined(CONFIG_ALPHA_GENERIC)
 # define get_rtc_time		alpha_mv.rtc_get_time
 # define set_rtc_time		alpha_mv.rtc_set_time
-#else
-# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
-#  define get_rtc_time		marvel_get_rtc_time
-#  define set_rtc_time		marvel_set_rtc_time
-# endif
 #endif
 
 #include <asm-generic/rtc.h>

arch/alpha/include/asm/xchg.h

@@ -1,10 +1,10 @@
-#ifndef _ALPHA_ATOMIC_H
+#ifndef _ALPHA_CMPXCHG_H
 #error Do not include xchg.h directly!
 #else
 /*
  * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
  * except that local version do not have the expensive memory barrier.
- * So this file is included twice from asm/system.h.
+ * So this file is included twice from asm/cmpxchg.h.
  */
 
 /*

arch/alpha/kernel/core_tsunami.c

@@ -11,6 +11,7 @@
 #include <asm/core_tsunami.h>
 #undef __EXTERN_INLINE
 
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>

arch/alpha/kernel/pci-noop.c

@@ -108,7 +108,8 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn,
 }
 
 static void *alpha_noop_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t gfp)
+				       dma_addr_t *dma_handle, gfp_t gfp,
+				       struct dma_attrs *attrs)
 {
 	void *ret;
 
@@ -123,7 +124,8 @@ static void *alpha_noop_alloc_coherent(struct device *dev, size_t size,
 }
 
 static void alpha_noop_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_addr)
+				     void *cpu_addr, dma_addr_t dma_addr,
+				     struct dma_attrs *attrs)
 {
 	free_pages((unsigned long)cpu_addr, get_order(size));
 }
@@ -174,8 +176,8 @@ static int alpha_noop_set_mask(struct device *dev, u64 mask)
 }
 
 struct dma_map_ops alpha_noop_ops = {
-	.alloc_coherent		= alpha_noop_alloc_coherent,
-	.free_coherent		= alpha_noop_free_coherent,
+	.alloc			= alpha_noop_alloc_coherent,
+	.free			= alpha_noop_free_coherent,
 	.map_page		= alpha_noop_map_page,
 	.map_sg			= alpha_noop_map_sg,
 	.mapping_error		= alpha_noop_mapping_error,

arch/alpha/kernel/pci_iommu.c

@@ -434,7 +434,8 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
    else DMA_ADDRP is undefined.  */
 
 static void *alpha_pci_alloc_coherent(struct device *dev, size_t size,
-				      dma_addr_t *dma_addrp, gfp_t gfp)
+				      dma_addr_t *dma_addrp, gfp_t gfp,
+				      struct dma_attrs *attrs)
 {
 	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	void *cpu_addr;
@@ -478,7 +479,8 @@ try_again:
    DMA_ADDR past this call are illegal.  */
 
 static void alpha_pci_free_coherent(struct device *dev, size_t size,
-				    void *cpu_addr, dma_addr_t dma_addr)
+				    void *cpu_addr, dma_addr_t dma_addr,
+				    struct dma_attrs *attrs)
 {
 	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
@@ -952,8 +954,8 @@ static int alpha_pci_set_mask(struct device *dev, u64 mask)
 }
 
 struct dma_map_ops alpha_pci_ops = {
-	.alloc_coherent		= alpha_pci_alloc_coherent,
-	.free_coherent		= alpha_pci_free_coherent,
+	.alloc			= alpha_pci_alloc_coherent,
+	.free			= alpha_pci_free_coherent,
 	.map_page		= alpha_pci_map_page,
 	.unmap_page		= alpha_pci_unmap_page,
 	.map_sg			= alpha_pci_map_sg,

arch/alpha/kernel/signal.c

@@ -120,12 +120,13 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
  */
 SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -238,10 +239,7 @@ do_sigreturn(struct sigcontext __user *sc, struct pt_regs *regs,
 		goto give_sigsegv;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(sc, regs, sw))
 		goto give_sigsegv;
@@ -276,10 +274,7 @@ do_rt_sigreturn(struct rt_sigframe __user *frame, struct pt_regs *regs,
 		goto give_sigsegv;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(&frame->uc.uc_mcontext, regs, sw))
 		goto give_sigsegv;
@@ -501,14 +496,8 @@ handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
 	else
 		ret = setup_frame(sig, ka, oldset, regs, sw);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER)) 
-			sigaddset(&current->blocked,sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
 
 	return ret;
 }

arch/alpha/kernel/smp.c

@@ -450,7 +450,7 @@ setup_smp(void)
 		smp_num_probed = 1;
 	}
 
-	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n",
+	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
 	       smp_num_probed, cpumask_bits(cpu_present_mask)[0]);
 }
 

arch/alpha/kernel/sys_marvel.c

@@ -317,7 +317,7 @@ marvel_init_irq(void)
 }
 
 static int 
-marvel_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pci_controller *hose = dev->sysdata;
 	struct io7_port *io7_port = hose->sysdata;

arch/arm/Kconfig

@@ -338,6 +338,7 @@ config ARCH_AT91
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_DOMAIN
+	select NEED_MACH_IO_H if PCCARD
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 processors.
@@ -1185,6 +1186,15 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_326103
+	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+	depends on CPU_V6
+	help
+	  Executing a SWP instruction to read-only memory does not set bit 11
+	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+	  treat the access as a read, preventing a COW from occurring and
+	  causing the faulting task to livelock.
+
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 	depends on CPU_V6 || CPU_V6K

arch/arm/boot/compressed/atags_to_fdt.c

@@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		} else if (atag->hdr.tag == ATAG_MEM) {
 			if (memcount >= sizeof(mem_reg_property)/4)
 				continue;
+			if (!atag->u.mem.size)
+				continue;
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
 		} else if (atag->hdr.tag == ATAG_INITRD2) {

arch/arm/boot/compressed/head.S

@@ -273,7 +273,7 @@ restart:	adr	r0, LC0
 		add	r0, r0, #0x100
 		mov	r1, r6
 		sub	r2, sp, r6
-		blne	atags_to_fdt
+		bleq	atags_to_fdt
 
 		ldmfd	sp!, {r0-r3, ip, lr}
 		sub	sp, sp, #0x10000

arch/arm/boot/dts/at91sam9g20.dtsi

@@ -35,7 +35,7 @@
 		};
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x08000000>;
 	};
 
@@ -55,7 +55,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 

arch/arm/boot/dts/at91sam9g25ek.dts

@@ -37,8 +37,8 @@
 		usb0: ohci@00600000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 0
-					   &pioD 20 0
+			atmel,vbus-gpio = <&pioD 19 1
+					   &pioD 20 1
 					  >;
 		};
 

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -36,7 +36,7 @@
 		};
 	};
 
-	memory@70000000 {
+	memory {
 		reg = <0x70000000 0x10000000>;
 	};
 
@@ -56,7 +56,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 

arch/arm/boot/dts/at91sam9m10g45ek.dts

@@ -17,7 +17,7 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
-	memory@70000000 {
+	memory {
 		reg = <0x70000000 0x4000000>;
 	};
 
@@ -73,8 +73,8 @@
 		usb0: ohci@00700000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 1 0
-					   &pioD 3 0>;
+			atmel,vbus-gpio = <&pioD 1 1
+					   &pioD 3 1>;
 		};
 
 		usb1: ehci@00800000 {

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -34,7 +34,7 @@
 		};
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x10000000>;
 	};
 
@@ -54,7 +54,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
@@ -201,8 +200,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioC 8 0
-				 &pioC 14 0
+			gpios = <&pioD 5 0
+				 &pioD 4 0
 				 0
 				>;
 			status = "disabled";

arch/arm/boot/dts/at91sam9x5cm.dtsi

@@ -8,7 +8,7 @@
  */
 
 / {
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x8000000>;
 	};
 

arch/arm/boot/dts/db8500.dtsi

@@ -24,7 +24,6 @@
 			#interrupt-cells = <3>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xa0411000 0x1000>,
 			      <0xa0410100 0x100>;
 		};

arch/arm/boot/dts/highbank.dts

@@ -89,7 +89,6 @@
 			#size-cells = <0>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
 		};

arch/arm/boot/dts/msm8660-surf.dts

@@ -10,7 +10,7 @@
 	intc: interrupt-controller@02080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x02080000 0x1000 >,
 		      < 0x02081000 0x1000 >;
 	};
@@ -19,6 +19,6 @@
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
-		interrupts = <195>;
+		interrupts = <0 195 0x0>;
 	};
 };

arch/arm/boot/dts/usb_a9g20.dts

@@ -16,7 +16,7 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x4000000>;
 	};
 

arch/arm/boot/dts/versatile-ab.dts

@@ -173,7 +173,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22>;
+				interrupts = <22 34>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";

arch/arm/boot/dts/versatile-pb.dts

@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23>;
+				interrupts = <23 34>;
 			};
 		};
 	};

arch/arm/common/vic.c

@@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
 
 /*
  * Handle each interrupt in a single VIC.  Returns non-zero if we've
- * handled at least one interrupt.  This does a single read of the
- * status register and handles all interrupts in order from LSB first.
+ * handled at least one interrupt.  This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
  */
 static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
 {
 	u32 stat, irq;
 	int handled = 0;
 
-	stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
-	while (stat) {
+	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
 		irq = ffs(stat) - 1;
 		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
-		stat &= ~(1 << irq);
 		handled = 1;
 	}
 

arch/arm/configs/imx_v4_v5_defconfig

@@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_FB=y

arch/arm/configs/mini2440_defconfig

@@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_S3C24XX=y
+# CONFIG_CPU_S3C2410 is not set
+CONFIG_CPU_S3C2440=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y

arch/arm/configs/u8500_defconfig

@@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_U8500=y
-CONFIG_UX500_SOC_DB5500=y
-CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
@@ -39,7 +37,6 @@ CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
@@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_NOMADIK=y
-CONFIG_I2C=y
-CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_AB8500_BM=y
+CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
+CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y

arch/arm/include/asm/barrier.h

@@ -2,6 +2,7 @@
 #define __ASM_BARRIER_H
 
 #ifndef __ASSEMBLY__
+#include <asm/outercache.h>
 
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
@@ -39,7 +40,6 @@
 #ifdef CONFIG_ARCH_HAS_BARRIERS
 #include <mach/barriers.h>
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
-#include <asm/outercache.h>
 #define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dsb()
 #define wmb()		mb()

arch/arm/include/asm/io.h

@@ -119,7 +119,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 #ifdef CONFIG_NEED_MACH_IO_H
 #include <mach/io.h>
 #else
-#define __io(a)		({ (void)(a); __typesafe_io(0); })
+#define __io(a)		__typesafe_io((a) & IO_SPACE_LIMIT)
 #endif
 
 /*

arch/arm/include/asm/jump_label.h

@@ -14,7 +14,7 @@
 #define JUMP_LABEL_NOP	"nop"
 #endif
 
-static __always_inline bool arch_static_branch(struct jump_label_key *key)
+static __always_inline bool arch_static_branch(struct static_key *key)
 {
 	asm goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"

arch/arm/include/asm/thread_info.h

@@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *);
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
+struct user_vfp;
+struct user_vfp_exc;
+
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
+					   struct user_vfp_exc __user *);
+extern int vfp_restore_user_hwstate(struct user_vfp __user *,
+				    struct user_vfp_exc __user *);
 #endif
 
 /*

arch/arm/include/asm/tls.h

@@ -7,6 +7,8 @@
 
 	.macro set_tls_v6k, tp, tmp1, tmp2
 	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	mov	\tmp1, #0
+	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	.endm
 
 	.macro set_tls_v6, tp, tmp1, tmp2
@@ -15,6 +17,8 @@
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	movne	\tmp1, #0
+	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
 

arch/arm/kernel/bios32.c

@@ -299,7 +299,6 @@ static inline int pdev_bad_for_parity(struct pci_dev *dev)
  */
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_sys_data *root = bus->sysdata;
 	struct pci_dev *dev;
 	u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK;
 

arch/arm/kernel/insn.c

@@ -1,3 +1,4 @@
+#include <linux/bug.h>
 #include <linux/kernel.h>
 #include <asm/opcodes.h>
 

arch/arm/kernel/irq.c

@@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	}
 
 	c = irq_data_get_irq_chip(d);
-	if (c->irq_set_affinity)
-		c->irq_set_affinity(d, affinity, true);
-	else
+	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
 
 	return ret;
 }

arch/arm/kernel/kprobes.c

@@ -152,7 +152,7 @@ int __kprobes __arch_disarm_kprobe(void *p)
 
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
+	stop_machine(__arch_disarm_kprobe, p, cpu_online_mask);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)

arch/arm/kernel/ptrace.c

@@ -256,7 +256,7 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 {
 	unsigned long tmp;
 
-	if (off & 3 || off >= sizeof(struct user))
+	if (off & 3)
 		return -EIO;
 
 	tmp = 0;
@@ -268,6 +268,8 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 		tmp = tsk->mm->end_code;
 	else if (off < sizeof(struct pt_regs))
 		tmp = get_user_reg(tsk, off >> 2);
+	else if (off >= sizeof(struct user))
+		return -EIO;
 
 	return put_user(tmp, ret);
 }
@@ -904,27 +906,14 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
-#ifdef __ARMEB__
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
-#else
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
-#endif
-
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
 
-	/*
-	 * Save IP.  IP is used to denote syscall entry/exit:
-	 *  IP = 0 -> entry, = 1 -> exit
-	 */
-	ip = regs->ARM_ip;
-	regs->ARM_ip = why;
-
-	if (!ip)
+	if (why)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
@@ -934,6 +923,13 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 
 	current_thread_info()->syscall = scno;
 
+	/*
+	 * IP is used to denote syscall entry/exit:
+	 * IP = 0 -> entry, =1 -> exit
+	 */
+	ip = regs->ARM_ip;
+	regs->ARM_ip = why;
+
 	/* the 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)

arch/arm/kernel/setup.c

@@ -523,7 +523,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size)
 	 */
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
-	bank->size  = size & PAGE_MASK;
+
+#ifndef CONFIG_LPAE
+	if (bank->start + size < bank->start) {
+		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
+			"32-bit physical address space\n", (long long)start);
+		/*
+		 * To ensure bank->start + bank->size is representable in
+		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
+		 * This means we lose a page after masking.
+		 */
+		size = ULONG_MAX - bank->start;
+	}
+#endif
+
+	bank->size = size & PAGE_MASK;
 
 	/*
 	 * Check whether this memory region has non-zero size or

arch/arm/kernel/signal.c

@@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 
 static int preserve_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	const unsigned long magic = VFP_MAGIC;
 	const unsigned long size = VFP_STORAGE_SIZE;
 	int err = 0;
 
-	vfp_sync_hwstate(thread);
 	__put_user_error(magic, &frame->magic, err);
 	__put_user_error(size, &frame->size, err);
 
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
-			      sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Copy the exception registers.
-	 */
-	__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
-	__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+	if (err)
+		return -EFAULT;
 
-	return err ? -EFAULT : 0;
+	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 static int restore_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	unsigned long magic;
 	unsigned long size;
-	unsigned long fpexc;
 	int err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
@@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
-				sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Sanitise and restore the exception registers.
-	 */
-	__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
-	/* Ensure the VFP is enabled. */
-	fpexc |= FPEXC_EN;
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-	h->fpexc = fpexc;
-
-	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 #endif

arch/arm/kernel/smp.c

@@ -251,8 +251,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu = smp_processor_id();
 
-	printk("CPU%u: Booted secondary processor\n", cpu);
-
 	/*
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
@@ -264,6 +262,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
 
+	printk("CPU%u: Booted secondary processor\n", cpu);
+
 	cpu_init();
 	preempt_disable();
 	trace_hardirqs_off();
@@ -349,7 +349,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		 * re-initialize the map in platform_smp_prepare_cpus() if
 		 * present != possible (e.g. physical hotplug).
 		 */
-		init_cpu_present(&cpu_possible_map);
+		init_cpu_present(cpu_possible_mask);
 
 		/*
 		 * Initialise the SCU if there are more than one CPU
@@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
-#ifdef CONFIG_HOTPLUG_CPU
-	platform_cpu_kill(cpu);
-#endif
-
 	while (1)
 		cpu_relax();
 }
@@ -576,16 +572,25 @@ void smp_send_reschedule(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static void smp_kill_cpus(cpumask_t *mask)
+{
+	unsigned int cpu;
+	for_each_cpu(cpu, mask)
+		platform_cpu_kill(cpu);
+}
+#else
+static void smp_kill_cpus(cpumask_t *mask) { }
+#endif
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
+	struct cpumask mask;
 
-	if (num_online_cpus() > 1) {
-		cpumask_t mask = cpu_online_map;
-		cpu_clear(smp_processor_id(), mask);
-
-		smp_cross_call(&mask, IPI_CPU_STOP);
-	}
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	smp_cross_call(&mask, IPI_CPU_STOP);
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
@@ -594,6 +599,8 @@ void smp_send_stop(void)
 
 	if (num_online_cpus() > 1)
 		pr_warning("SMP: failed to stop secondary CPUs\n");
+
+	smp_kill_cpus(&mask);
 }
 
 /*

arch/arm/kernel/sys_arm.c

@@ -115,7 +115,7 @@ int kernel_execve(const char *filename,
 		  "Ir" (THREAD_START_SP - sizeof(regs)),
 		  "r" (&regs),
 		  "Ir" (sizeof(regs))
-		: "r0", "r1", "r2", "r3", "ip", "lr", "memory");
+		: "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
 
  out:
 	return ret;

arch/arm/mach-at91/at91rm9200_devices.c

@@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void)
 		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}

arch/arm/mach-at91/at91rm9200_time.c

@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clockchips.h>
+#include <linux/export.h>
 
 #include <asm/mach/time.h>
 
@@ -176,6 +177,7 @@ static struct clock_event_device clkevt = {
 };
 
 void __iomem *at91_st_base;
+EXPORT_SYMBOL_GPL(at91_st_base);
 
 void __init at91rm9200_ioremap_st(u32 addr)
 {

arch/arm/mach-at91/at91sam9260_devices.c

@@ -598,6 +598,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else

arch/arm/mach-at91/at91sam9261_devices.c

@@ -415,6 +415,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else

arch/arm/mach-at91/at91sam9263_devices.c

@@ -72,7 +72,8 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	/* Enable overcurrent notification */
@@ -671,6 +672,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -127,12 +127,13 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -188,7 +189,8 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	usbh_ehci_data = *data;
@@ -785,6 +787,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -419,6 +419,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		/* enable chip-select pin */
 		at91_set_gpio_output(cs_pin, 1);
 

arch/arm/mach-at91/at91sam9x5.c

@@ -223,6 +223,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
 	CLKDEV_CON_ID("pioA", &pioAB_clk),
 	CLKDEV_CON_ID("pioB", &pioAB_clk),
 	CLKDEV_CON_ID("pioC", &pioCD_clk),

arch/arm/mach-at91/board-rm9200ek.c

@@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	SZ_2M
+#define EK_FLASH_SIZE	SZ_8M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,

arch/arm/mach-at91/board-sam9261ek.c

@@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = {
 		.flags	= IORESOURCE_MEM
 	},
 	[2] = {
-		.start	= AT91_PIN_PC11,
-		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
 			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
@@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
 
 static void __init ek_add_device_dm9000(void)
 {
+	struct resource *r = &dm9000_resource[2];
+
 	/* Configure chip-select 2 (DM9000) */
 	sam9_smc_configure(0, 2, &dm9000_smc_config);
 
@@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void)
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(AT91_PIN_PC11, 0);
 
+	r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
 	platform_device_register(&dm9000_device);
 }
 #else

arch/arm/mach-at91/board-sam9263ek.c

@@ -74,6 +74,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_data = {
 	.ports		= 2,
 	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+	.vbus_pin_active_low = {1, 1},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -71,6 +71,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_hs_data = {
 	.ports		= 2,
 	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
+	.vbus_pin_active_low = {1, 1},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 

arch/arm/mach-at91/clock.c

@@ -35,6 +35,7 @@
 #include "generic.h"
 
 void __iomem *at91_pmc_base;
+EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 /*
  * There's a lot more which can be done with clocks, including cpufreq

arch/arm/mach-at91/include/mach/at91_pmc.h

@@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base;
 #define at91_pmc_write(field, value) \
 	__raw_writel(value, at91_pmc_base + field)
 #else
-.extern at91_aic_base
+.extern at91_pmc_base
 #endif
 
 #define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */

arch/arm/mach-at91/include/mach/board.h

@@ -86,14 +86,15 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d
 extern void __init at91_add_device_eth(struct macb_platform_data *data);
 
  /* USB Host */
+#define AT91_MAX_USBH_PORTS	3
 struct at91_usbh_data {
-	u8		ports;		/* number of ports on root hub */
-	int		vbus_pin[2];	/* port power-control pin */
-	u8              vbus_pin_active_low[2];
+	int		vbus_pin[AT91_MAX_USBH_PORTS];	/* port power-control pin */
+	int             overcurrent_pin[AT91_MAX_USBH_PORTS];
+	u8		ports;				/* number of ports on root hub */
 	u8              overcurrent_supported;
-	int             overcurrent_pin[2];
-	u8              overcurrent_status[2];
-	u8              overcurrent_changed[2];
+	u8              vbus_pin_active_low[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_status[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_changed[AT91_MAX_USBH_PORTS];
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);

arch/arm/mach-at91/include/mach/io.h

@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-at91/include/mach/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+#define __io(a)			__typesafe_io(a)
+
+#endif

arch/arm/mach-at91/setup.c

@@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority)
 }
 
 void __iomem *at91_ramc_base[2];
+EXPORT_SYMBOL_GPL(at91_ramc_base);
 
 void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
 {
@@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr)
 }
 
 void __iomem *at91_matrix_base;
+EXPORT_SYMBOL_GPL(at91_matrix_base);
 
 void __init at91_ioremap_matrix(u32 base_addr)
 {

arch/arm/mach-bcmring/core.c

@@ -52,8 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
-static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
+static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
+static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
 
 static struct clk pll1_clk = {
 	.name = "PLL1",

arch/arm/mach-exynos/Kconfig

@@ -232,6 +232,9 @@ config MACH_ARMLEX4210
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CPU_EXYNOS4210
+	select S5P_HRT
+	select CLKSRC_MMIO
+	select HAVE_SCHED_CLOCK
 	select S5P_GPIO_INT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -368,6 +371,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
 
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
+	depends on ARCH_EXYNOS4
 	select CPU_EXYNOS4210
 	select USE_OF
 	select ARM_AMBA
@@ -380,6 +384,7 @@ config MACH_EXYNOS4_DT
 
 config MACH_EXYNOS5_DT
 	bool "SAMSUNG EXYNOS5 Machine using device tree"
+	depends on ARCH_EXYNOS5
 	select SOC_EXYNOS5250
 	select USE_OF
 	select ARM_AMBA

arch/arm/mach-exynos/clock-exynos4.c

@@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = {
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_dout_mmc0.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_dout_mmc1.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_dout_mmc2.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_dout_mmc3.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),

arch/arm/mach-exynos/clock-exynos5.c

@@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = {
 		.ctrlbit	= (1 << 20),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -678,7 +678,7 @@ static struct clk exynos5_clk_pdma1 = {
 	.name		= "dma",
 	.devname	= "dma-pl330.1",
 	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
+	.ctrlbit	= (1 << 2),
 };
 
 static struct clk exynos5_clk_mdma1 = {
@@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),

arch/arm/mach-exynos/common.c

@@ -326,6 +326,11 @@ static void __init exynos4_map_io(void)
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -344,6 +349,11 @@ static void __init exynos5_map_io(void)
 	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
 	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -537,7 +547,9 @@ void __init exynos5_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+#ifdef CONFIG_OF
+	of_irq_init(exynos4_dt_irq_match);
+#endif
 
 	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
@@ -583,10 +595,11 @@ core_initcall(exynos_core_init);
 #ifdef CONFIG_CACHE_L2X0
 static int __init exynos4_l2x0_cache_init(void)
 {
+	int ret;
+
 	if (soc_is_exynos5250())
 		return 0;
 
-	int ret;
 	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
 	if (!ret) {
 		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);