Staging: wlan-ng: Move firmware loading into driver

Move prism2 firmware loading from userspace into driver, using linux
request_firmware(). Firmware is now loaded (if available) on device
probing, before it is registered as a netdevice and advertised to userspace.

Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/wlan-ng/hfa384x.h

@@ -64,6 +64,7 @@
 #define		HFA384x_PORTID_MAX		((u16)7)
 #define		HFA384x_NUMPORTS_MAX		((u16)(HFA384x_PORTID_MAX+1))
 #define		HFA384x_PDR_LEN_MAX		((u16)512) /* in bytes, from EK */
+#define		HFA384x_PDA_RECS_MAX		((u16)200) /* a guess */
 #define		HFA384x_PDA_LEN_MAX		((u16)1024) /* in bytes, from EK */
 #define		HFA384x_SCANRESULT_MAX		((u16)31)
 #define		HFA384x_HSCANRESULT_MAX		((u16)31)
@@ -882,6 +883,249 @@ typedef union hfa384x_usbin {
 	u8 boguspad[3000];
 } __attribute__ ((packed)) hfa384x_usbin_t;
 
+/*--------------------------------------------------------------------
+PD record structures.
+--------------------------------------------------------------------*/
+
+typedef struct hfa384x_pdr_pcb_partnum
+{
+	u8	num[8];
+} __attribute__ ((packed)) hfa384x_pdr_pcb_partnum_t;
+
+typedef struct hfa384x_pdr_pcb_tracenum
+{
+	u8	num[8];
+} __attribute__ ((packed)) hfa384x_pdr_pcb_tracenum_t;
+
+typedef struct hfa384x_pdr_nic_serial
+{
+	u8	num[12];
+} __attribute__ ((packed)) hfa384x_pdr_nic_serial_t;
+
+typedef struct hfa384x_pdr_mkk_measurements
+{
+	double	carrier_freq;
+	double	occupied_band;
+	double	power_density;
+	double	tx_spur_f1;
+	double	tx_spur_f2;
+	double	tx_spur_f3;
+	double	tx_spur_f4;
+	double	tx_spur_l1;
+	double	tx_spur_l2;
+	double	tx_spur_l3;
+	double	tx_spur_l4;
+	double	rx_spur_f1;
+	double	rx_spur_f2;
+	double	rx_spur_l1;
+	double	rx_spur_l2;
+} __attribute__ ((packed)) hfa384x_pdr_mkk_measurements_t;
+
+typedef struct hfa384x_pdr_nic_ramsize
+{
+	u8	size[12]; /* units of KB */
+} __attribute__ ((packed)) hfa384x_pdr_nic_ramsize_t;
+
+typedef struct hfa384x_pdr_mfisuprange
+{
+	u16	id;
+	u16	variant;
+	u16	bottom;
+	u16	top;
+} __attribute__ ((packed)) hfa384x_pdr_mfisuprange_t;
+
+typedef struct hfa384x_pdr_cfisuprange
+{
+	u16	id;
+	u16	variant;
+	u16	bottom;
+	u16	top;
+} __attribute__ ((packed)) hfa384x_pdr_cfisuprange_t;
+
+typedef struct hfa384x_pdr_nicid
+{
+	u16	id;
+	u16	variant;
+	u16	major;
+	u16	minor;
+} __attribute__ ((packed)) hfa384x_pdr_nicid_t;
+
+
+typedef struct hfa384x_pdr_refdac_measurements
+{
+	u16	value[0];
+} __attribute__ ((packed)) hfa384x_pdr_refdac_measurements_t;
+
+typedef struct hfa384x_pdr_vgdac_measurements
+{
+	u16	value[0];
+} __attribute__ ((packed)) hfa384x_pdr_vgdac_measurements_t;
+
+typedef struct hfa384x_pdr_level_comp_measurements
+{
+	u16	value[0];
+} __attribute__ ((packed)) hfa384x_pdr_level_compc_measurements_t;
+
+typedef struct hfa384x_pdr_mac_address
+{
+	u8	addr[6];
+} __attribute__ ((packed)) hfa384x_pdr_mac_address_t;
+
+typedef struct hfa384x_pdr_mkk_callname
+{
+	u8	callname[8];
+} __attribute__ ((packed)) hfa384x_pdr_mkk_callname_t;
+
+typedef struct hfa384x_pdr_regdomain
+{
+	u16	numdomains;
+	u16	domain[5];
+} __attribute__ ((packed)) hfa384x_pdr_regdomain_t;
+
+typedef struct hfa384x_pdr_allowed_channel
+{
+	u16	ch_bitmap;
+} __attribute__ ((packed)) hfa384x_pdr_allowed_channel_t;
+
+typedef struct hfa384x_pdr_default_channel
+{
+	u16	channel;
+} __attribute__ ((packed)) hfa384x_pdr_default_channel_t;
+
+typedef struct hfa384x_pdr_privacy_option
+{
+	u16	available;
+} __attribute__ ((packed)) hfa384x_pdr_privacy_option_t;
+
+typedef struct hfa384x_pdr_temptype
+{
+	u16	type;
+} __attribute__ ((packed)) hfa384x_pdr_temptype_t;
+
+typedef struct hfa384x_pdr_refdac_setup
+{
+	u16	ch_value[14];
+} __attribute__ ((packed)) hfa384x_pdr_refdac_setup_t;
+
+typedef struct hfa384x_pdr_vgdac_setup
+{
+	u16	ch_value[14];
+} __attribute__ ((packed)) hfa384x_pdr_vgdac_setup_t;
+
+typedef struct hfa384x_pdr_level_comp_setup
+{
+	u16	ch_value[14];
+} __attribute__ ((packed)) hfa384x_pdr_level_comp_setup_t;
+
+typedef struct hfa384x_pdr_trimdac_setup
+{
+	u16	trimidac;
+	u16	trimqdac;
+} __attribute__ ((packed)) hfa384x_pdr_trimdac_setup_t;
+
+typedef struct hfa384x_pdr_ifr_setting
+{
+	u16	value[3];
+} __attribute__ ((packed)) hfa384x_pdr_ifr_setting_t;
+
+typedef struct hfa384x_pdr_rfr_setting
+{
+	u16	value[3];
+} __attribute__ ((packed)) hfa384x_pdr_rfr_setting_t;
+
+typedef struct hfa384x_pdr_hfa3861_baseline
+{
+	u16	value[50];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_baseline_t;
+
+typedef struct hfa384x_pdr_hfa3861_shadow
+{
+	u32	value[32];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_shadow_t;
+
+typedef struct hfa384x_pdr_hfa3861_ifrf
+{
+	u32	value[20];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_ifrf_t;
+
+typedef struct hfa384x_pdr_hfa3861_chcalsp
+{
+	u16	value[14];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_chcalsp_t;
+
+typedef struct hfa384x_pdr_hfa3861_chcali
+{
+	u16	value[17];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_chcali_t;
+
+typedef struct hfa384x_pdr_hfa3861_nic_config
+{
+	u16	config_bitmap;
+} __attribute__ ((packed)) hfa384x_pdr_nic_config_t;
+
+typedef struct hfa384x_pdr_hfo_delay
+{
+	u8   hfo_delay;
+} __attribute__ ((packed)) hfa384x_hfo_delay_t;
+
+typedef struct hfa384x_pdr_hfa3861_manf_testsp
+{
+	u16	value[30];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_manf_testsp_t;
+
+typedef struct hfa384x_pdr_hfa3861_manf_testi
+{
+	u16	value[30];
+} __attribute__ ((packed)) hfa384x_pdr_hfa3861_manf_testi_t;
+
+typedef struct hfa384x_end_of_pda
+{
+	u16	crc;
+} __attribute__ ((packed)) hfa384x_pdr_end_of_pda_t;
+
+typedef struct hfa384x_pdrec
+{
+	u16	len; /* in words */
+	u16	code;
+	union pdr {
+	hfa384x_pdr_pcb_partnum_t	pcb_partnum;
+	hfa384x_pdr_pcb_tracenum_t	pcb_tracenum;
+	hfa384x_pdr_nic_serial_t	nic_serial;
+	hfa384x_pdr_mkk_measurements_t	mkk_measurements;
+	hfa384x_pdr_nic_ramsize_t	nic_ramsize;
+	hfa384x_pdr_mfisuprange_t	mfisuprange;
+	hfa384x_pdr_cfisuprange_t	cfisuprange;
+	hfa384x_pdr_nicid_t		nicid;
+	hfa384x_pdr_refdac_measurements_t	refdac_measurements;
+	hfa384x_pdr_vgdac_measurements_t	vgdac_measurements;
+	hfa384x_pdr_level_compc_measurements_t	level_compc_measurements;
+	hfa384x_pdr_mac_address_t	mac_address;
+	hfa384x_pdr_mkk_callname_t	mkk_callname;
+	hfa384x_pdr_regdomain_t		regdomain;
+	hfa384x_pdr_allowed_channel_t	allowed_channel;
+	hfa384x_pdr_default_channel_t	default_channel;
+	hfa384x_pdr_privacy_option_t	privacy_option;
+	hfa384x_pdr_temptype_t		temptype;
+	hfa384x_pdr_refdac_setup_t	refdac_setup;
+	hfa384x_pdr_vgdac_setup_t	vgdac_setup;
+	hfa384x_pdr_level_comp_setup_t	level_comp_setup;
+	hfa384x_pdr_trimdac_setup_t	trimdac_setup;
+	hfa384x_pdr_ifr_setting_t	ifr_setting;
+	hfa384x_pdr_rfr_setting_t	rfr_setting;
+	hfa384x_pdr_hfa3861_baseline_t	hfa3861_baseline;
+	hfa384x_pdr_hfa3861_shadow_t	hfa3861_shadow;
+	hfa384x_pdr_hfa3861_ifrf_t	hfa3861_ifrf;
+	hfa384x_pdr_hfa3861_chcalsp_t	hfa3861_chcalsp;
+	hfa384x_pdr_hfa3861_chcali_t	hfa3861_chcali;
+	hfa384x_pdr_nic_config_t	nic_config;
+	hfa384x_hfo_delay_t             hfo_delay;
+	hfa384x_pdr_hfa3861_manf_testsp_t	hfa3861_manf_testsp;
+	hfa384x_pdr_hfa3861_manf_testi_t	hfa3861_manf_testi;
+	hfa384x_pdr_end_of_pda_t	end_of_pda;
+
+	} data;
+} __attribute__ ((packed)) hfa384x_pdrec_t;
+
 #ifdef __KERNEL__
 /*--------------------------------------------------------------------
 ---  MAC state structure, argument to all functions --

drivers/staging/wlan-ng/p80211metadef.h

@@ -50,6 +50,14 @@
 #define DIDmsg_dot11req_mibget \
 			(P80211DID_MKSECTION(1) | \
 			P80211DID_MKGROUP(1))
+#define DIDmsg_dot11req_mibget_mibattribute \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_dot11req_mibget_resultcode \
+			(P80211DID_MKSECTION(1) | \
+			P80211DID_MKGROUP(1) | \
+			P80211DID_MKITEM(2) | 0x00000000)
 #define DIDmsg_dot11req_mibset \
 			(P80211DID_MKSECTION(1) | \
 			P80211DID_MKGROUP(2))
@@ -94,12 +102,48 @@
 #define DIDmsg_p2req_readpda \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(2))
+#define DIDmsg_p2req_readpda_pda \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_readpda_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(2) | \
+			P80211DID_MKITEM(2) | 0x00000000)
 #define DIDmsg_p2req_ramdl_state \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(11))
+#define DIDmsg_p2req_ramdl_state_enable \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_ramdl_state_exeaddr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_ramdl_state_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(11) | \
+			P80211DID_MKITEM(3) | 0x00000000)
 #define DIDmsg_p2req_ramdl_write \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(12))
+#define DIDmsg_p2req_ramdl_write_addr \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(1) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write_len \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(2) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write_data \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(3) | 0x00000000)
+#define DIDmsg_p2req_ramdl_write_resultcode \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(12) | \
+			P80211DID_MKITEM(4) | 0x00000000)
 #define DIDmsg_p2req_flashdl_state \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(13))
@@ -203,6 +247,10 @@
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(2) | \
 			P80211DID_MKITEM(1) | 0x18000000)
+#define DIDmib_p2_p2NIC_p2PRISupRange \
+			(P80211DID_MKSECTION(5) | \
+			P80211DID_MKGROUP(5) | \
+			P80211DID_MKITEM(6) | 0x10000000)
 #define DIDmib_p2_p2MAC \
 			(P80211DID_MKSECTION(5) | \
 			P80211DID_MKGROUP(6))

drivers/staging/wlan-ng/p80211netdev.c

@@ -566,8 +566,6 @@ static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
 
 	pr_debug("rx'd ioctl, cmd=%d, len=%d\n", cmd, req->len);
 
-	mutex_lock(&wlandev->ioctl_lock);
-
 #ifdef SIOCETHTOOL
 	if (cmd == SIOCETHTOOL) {
 		result =
@@ -608,8 +606,6 @@ static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
 		result = -ENOMEM;
 	}
 bail:
-	mutex_unlock(&wlandev->ioctl_lock);
-
 	return result;		/* If allocate,copyfrom or copyto fails, return errno */
 }
 
@@ -771,11 +767,6 @@ int wlan_setup(wlandevice_t *wlandev)
 		dev->ml_priv = wlandev;
 		dev->netdev_ops = &p80211_netdev_ops;
 
-		mutex_init(&wlandev->ioctl_lock);
-		/* block ioctls until fully initialised. Don't forget to call
-		   allow_ioctls at some point!*/
-		mutex_lock(&wlandev->ioctl_lock);
-
 #if (WIRELESS_EXT < 21)
 		dev->get_wireless_stats = p80211wext_get_wireless_stats;
 #endif
@@ -1116,8 +1107,3 @@ static void p80211knetdev_tx_timeout(netdevice_t *netdev)
 		netif_wake_queue(wlandev->netdev);
 	}
 }
-
-void p80211_allow_ioctls(wlandevice_t *wlandev)
-{
-	mutex_unlock(&wlandev->ioctl_lock);
-}

drivers/staging/wlan-ng/p80211netdev.h

@@ -227,8 +227,6 @@ typedef struct wlandevice {
 	u8 spy_number;
 	char spy_address[IW_MAX_SPY][ETH_ALEN];
 	struct iw_quality spy_stat[IW_MAX_SPY];
-
-	struct mutex ioctl_lock;
 } wlandevice_t;
 
 /* WEP stuff */
@@ -244,5 +242,4 @@ int register_wlandev(wlandevice_t *wlandev);
 int unregister_wlandev(wlandevice_t *wlandev);
 void p80211netdev_rx(wlandevice_t *wlandev, struct sk_buff *skb);
 void p80211netdev_hwremoved(wlandevice_t *wlandev);
-void p80211_allow_ioctls(wlandevice_t *wlandev);
 #endif

drivers/staging/wlan-ng/prism2fw.c

@@ -0,0 +1,1410 @@
+/* from src/prism2/download/prism2dl.c
+*
+* utility for downloading prism2 images moved into kernelspace
+*
+* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+* --------------------------------------------------------------------
+*
+* linux-wlan
+*
+*   The contents of this file are subject to the Mozilla Public
+*   License Version 1.1 (the "License"); you may not use this file
+*   except in compliance with the License. You may obtain a copy of
+*   the License at http://www.mozilla.org/MPL/
+*
+*   Software distributed under the License is distributed on an "AS
+*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+*   implied. See the License for the specific language governing
+*   rights and limitations under the License.
+*
+*   Alternatively, the contents of this file may be used under the
+*   terms of the GNU Public License version 2 (the "GPL"), in which
+*   case the provisions of the GPL are applicable instead of the
+*   above.  If you wish to allow the use of your version of this file
+*   only under the terms of the GPL and not to allow others to use
+*   your version of this file under the MPL, indicate your decision
+*   by deleting the provisions above and replace them with the notice
+*   and other provisions required by the GPL.  If you do not delete
+*   the provisions above, a recipient may use your version of this
+*   file under either the MPL or the GPL.
+*
+* --------------------------------------------------------------------
+*
+* Inquiries regarding the linux-wlan Open Source project can be
+* made directly to:
+*
+* AbsoluteValue Systems Inc.
+* info@linux-wlan.com
+* http://www.linux-wlan.com
+*
+* --------------------------------------------------------------------
+*
+* Portions of the development of this software were funded by
+* Intersil Corporation as part of PRISM(R) chipset product development.
+*
+* --------------------------------------------------------------------
+*/
+
+/*================================================================*/
+/* System Includes */
+#include <linux/sort.h>
+#include <linux/firmware.h>
+
+
+/*================================================================*/
+/* Local Constants */
+
+#define PRISM2_USB_FWFILE	"prism2_ru.hex"
+
+#define S3DATA_MAX		5000
+#define S3PLUG_MAX		200
+#define S3CRC_MAX		200
+#define S3INFO_MAX		50
+#define SREC_LINE_MAX		264
+#define S3LEN_TXTOFFSET		2
+#define S3LEN_TXTLEN		2
+#define S3ADDR_TXTOFFSET	4
+#define S3ADDR_TXTLEN		8
+#define S3DATA_TXTOFFSET	12
+/*S3DATA_TXTLEN			variable, depends on len field */
+/*S3CKSUM_TXTOFFSET		variable, depends on len field */
+#define S3CKSUM_TXTLEN		2
+#define SERNUM_LEN_MAX		12
+
+#define S3PLUG_ITEMCODE_TXTOFFSET	(S3DATA_TXTOFFSET)
+#define S3PLUG_ITEMCODE_TXTLEN		8
+#define S3PLUG_ADDR_TXTOFFSET		(S3DATA_TXTOFFSET+8)
+#define S3PLUG_ADDR_TXTLEN		8
+#define S3PLUG_LEN_TXTOFFSET		(S3DATA_TXTOFFSET+16)
+#define S3PLUG_LEN_TXTLEN		8
+
+#define S3CRC_ADDR_TXTOFFSET		(S3DATA_TXTOFFSET)
+#define S3CRC_ADDR_TXTLEN		8
+#define S3CRC_LEN_TXTOFFSET		(S3DATA_TXTOFFSET+8)
+#define S3CRC_LEN_TXTLEN		8
+#define S3CRC_DOWRITE_TXTOFFSET		(S3DATA_TXTOFFSET+16)
+#define S3CRC_DOWRITE_TXTLEN		8
+
+#define S3INFO_LEN_TXTOFFSET		(S3DATA_TXTOFFSET)
+#define S3INFO_LEN_TXTLEN		4
+#define S3INFO_TYPE_TXTOFFSET		(S3DATA_TXTOFFSET+4)
+#define S3INFO_TYPE_TXTLEN		4
+#define S3INFO_DATA_TXTOFFSET		(S3DATA_TXTOFFSET+8)
+/* S3INFO_DATA_TXTLEN			variable, depends on INFO_LEN field */
+
+#define S3ADDR_PLUG		(0xff000000UL)
+#define S3ADDR_CRC		(0xff100000UL)
+#define S3ADDR_INFO		(0xff200000UL)
+
+#define PDAFILE_LINE_MAX	1024
+
+#define CHUNKS_MAX		100
+
+#define WRITESIZE_MAX		4096
+
+/*================================================================*/
+/* Local Macros */
+
+#define bswap_16(x) \
+     (__extension__							      \
+      ({ register unsigned short int __v, __x = (x);			      \
+	   __asm__ ("rorw $8, %w0"					      \
+		    : "=r" (__v)					      \
+		    : "0" (__x)						      \
+		    : "cc");						      \
+	 __v; }))
+
+#define bswap_32(x) \
+     (__extension__							      \
+      ({ register unsigned int __v, __x = (x);				      \
+	   __asm__ ("rorw $8, %w0;"					      \
+		    "rorl $16, %0;"					      \
+		    "rorw $8, %w0"					      \
+		    : "=r" (__v)					      \
+		    : "0" (__x)						      \
+		    : "cc");						      \
+	 __v; }))
+
+
+
+/*================================================================*/
+/* Local Types */
+
+typedef struct s3datarec
+{
+	u32	len;
+	u32	addr;
+	u8	checksum;
+	u8	*data;
+} s3datarec_t;
+
+typedef struct s3plugrec
+{
+	u32	itemcode;
+	u32	addr;
+	u32	len;
+} s3plugrec_t;
+
+typedef struct s3crcrec
+{
+	u32		addr;
+	u32		len;
+	unsigned int	dowrite;
+} s3crcrec_t;
+
+typedef struct s3inforec
+{
+	u16	len;
+	u16	type;
+	union {
+		hfa384x_compident_t	version;
+		hfa384x_caplevel_t	compat;
+		u16			buildseq;
+		hfa384x_compident_t	platform;
+	}	info;
+} s3inforec_t;
+
+typedef struct pda
+{
+	u8		buf[HFA384x_PDA_LEN_MAX];
+	hfa384x_pdrec_t	*rec[HFA384x_PDA_RECS_MAX];
+	unsigned int	nrec;
+} pda_t;
+
+typedef struct imgchunk
+{
+	u32	addr;	/* start address */
+	u32	len;	/* in bytes */
+	u16	crc;	/* CRC value (if it falls at a chunk boundary) */
+	u8	*data;
+} imgchunk_t;
+
+/*================================================================*/
+/* Local Static Definitions */
+
+
+/*----------------------------------------------------------------*/
+/* s-record image processing */
+
+/* Data records */
+unsigned int	ns3data = 0;
+s3datarec_t	s3data[S3DATA_MAX];
+
+/* Plug records */
+unsigned int	ns3plug = 0;
+s3plugrec_t	s3plug[S3PLUG_MAX];
+
+/* CRC records */
+unsigned int	ns3crc = 0;
+s3crcrec_t	s3crc[S3CRC_MAX];
+
+/* Info records */
+unsigned int	ns3info = 0;
+s3inforec_t	s3info[S3INFO_MAX];
+
+/* S7 record (there _better_ be only one) */
+u32		startaddr;
+
+/* Load image chunks */
+unsigned int	nfchunks;
+imgchunk_t	fchunk[CHUNKS_MAX];
+
+/* Note that for the following pdrec_t arrays, the len and code */
+/*   fields are stored in HOST byte order. The mkpdrlist() function */
+/*   does the conversion.  */
+/*----------------------------------------------------------------*/
+/* PDA, built from [card|newfile]+[addfile1+addfile2...] */
+
+pda_t		pda;
+hfa384x_compident_t nicid;
+hfa384x_caplevel_t  rfid;
+hfa384x_caplevel_t  macid;
+hfa384x_caplevel_t  priid;
+
+
+/*================================================================*/
+/* Local Function Declarations */
+
+int	prism2_fwapply(char *rfptr, int rfsize, wlandevice_t *wlandev);
+int	read_srecfile(char *rfptr, int rfsize);
+int	mkimage(imgchunk_t *clist, unsigned int *ccnt);
+int	read_cardpda(pda_t *pda, wlandevice_t *wlandev);
+int	mkpdrlist( pda_t *pda);
+int	s3datarec_compare(const void *p1, const void *p2);
+int	plugimage( imgchunk_t *fchunk, unsigned int nfchunks,
+		s3plugrec_t* s3plug, unsigned int ns3plug, pda_t *pda);
+int	crcimage( imgchunk_t *fchunk, unsigned int nfchunks,
+		s3crcrec_t *s3crc, unsigned int ns3crc);
+int	writeimage(wlandevice_t *wlandev, imgchunk_t *fchunk, unsigned int nfchunks);
+void	free_chunks(imgchunk_t *fchunk, unsigned int *nfchunks);
+void	free_srecs(void);
+
+int     validate_identity(void);
+
+/*================================================================*/
+/* Function Definitions */
+
+
+/*----------------------------------------------------------------
+* prism2_fwtry
+*
+* Try and get firmware into memory
+*
+* Arguments:
+*	udev	usb device structure
+*	wlandev wlan device structure
+*
+* Returns:
+*	0	- success
+*	~0	- failure
+----------------------------------------------------------------*/
+int prism2_fwtry(struct usb_device *udev, wlandevice_t *wlandev)
+{
+	const struct firmware *fw_entry = NULL;
+
+	printk(KERN_INFO "prism2_usb: Checking for firmware %s\n", PRISM2_USB_FWFILE);
+	if(request_firmware(&fw_entry, PRISM2_USB_FWFILE, &udev->dev) != 0)
+	{
+		printk(KERN_INFO
+		       "prism2_usb: Firmware not available, but not essential\n");
+		printk(KERN_INFO
+		       "prism2_usb: can continue to use card anyway.\n");
+		return 1;
+	}
+
+	printk(KERN_INFO "prism2_usb: %s will be processed, size %d\n", PRISM2_USB_FWFILE, fw_entry->size);
+	prism2_fwapply((char *)fw_entry->data, fw_entry->size, wlandev);
+
+	release_firmware(fw_entry);
+	return 0;
+}
+
+
+/*----------------------------------------------------------------
+* prism2_fwapply
+*
+* Apply the firmware loaded into memory
+*
+* Arguments:
+*	rfptr	firmware image in kernel memory
+*	rfsize	firmware size in kernel memory
+*	wlandev device
+*
+* Returns:
+*	0	- success
+*	~0	- failure
+----------------------------------------------------------------*/
+int prism2_fwapply(char *rfptr, int rfsize, wlandevice_t *wlandev)
+{
+	signed int	result = 0;
+	p80211msg_dot11req_mibget_t getmsg;
+	p80211itemd_t *item;
+	u32        *data;
+
+	/* Initialize the data structures */
+	ns3data = 0;
+	memset(s3data, 0, sizeof(s3data));
+	ns3plug = 0;
+	memset(s3plug, 0, sizeof(s3plug));
+	ns3crc = 0;
+	memset(s3crc, 0, sizeof(s3crc));
+	ns3info = 0;
+	memset(s3info, 0, sizeof(s3info));
+	startaddr = 0;
+
+	nfchunks = 0;
+	memset( fchunk, 0, sizeof(fchunk));
+	memset( &nicid, 0, sizeof(nicid));
+	memset( &rfid, 0, sizeof(rfid));
+	memset( &macid, 0, sizeof(macid));
+	memset( &priid, 0, sizeof(priid));
+
+	/* clear the pda and add an initial END record */
+	memset(&pda, 0, sizeof(pda));
+	pda.rec[0] = (hfa384x_pdrec_t*)pda.buf;
+	pda.rec[0]->len = cpu_to_le16(2);  	/* len in words */  			/* len in words */
+	pda.rec[0]->code = cpu_to_le16(HFA384x_PDR_END_OF_PDA);
+	pda.nrec = 1;
+
+
+	/*-----------------------------------------------------*/
+	/* Put card into fwload state */
+	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
+
+	/* Build the PDA we're going to use. */
+	if (read_cardpda(&pda, wlandev)) {
+		printk(KERN_ERR "load_cardpda failed, exiting.\n");
+		return(1);
+	}
+
+	/* read the card's PRI-SUP */
+	memset(&getmsg, 0, sizeof(getmsg));
+	getmsg.msgcode = DIDmsg_dot11req_mibget;
+	getmsg.msglen = sizeof(getmsg);
+	strcpy(getmsg.devname, wlandev->name);
+
+	getmsg.mibattribute.did = DIDmsg_dot11req_mibget_mibattribute;
+	getmsg.mibattribute.status = P80211ENUM_msgitem_status_data_ok;
+	getmsg.resultcode.did = DIDmsg_dot11req_mibget_resultcode;
+	getmsg.resultcode.status = P80211ENUM_msgitem_status_no_value;
+
+	item = (p80211itemd_t *) getmsg.mibattribute.data;
+	item->did = DIDmib_p2_p2NIC_p2PRISupRange;
+	item->status = P80211ENUM_msgitem_status_no_value;
+
+	data = (u32*) item->data;
+
+	/* DIDmsg_dot11req_mibget */
+	prism2mgmt_mibset_mibget(wlandev, &getmsg);
+	if (getmsg.resultcode.data != P80211ENUM_resultcode_success) {
+		printk(KERN_ERR "Couldn't fetch PRI-SUP info\n");
+	}
+
+	/* Already in host order */
+	priid.role = *data++;
+	priid.id = *data++;
+	priid.variant = *data++;
+	priid.bottom = *data++;
+	priid.top = *data++;
+
+
+	/* Read the S3 file */
+	result = read_srecfile(rfptr, rfsize);
+	if ( result ) {
+		printk(KERN_ERR "Failed to read the data exiting.\n");
+		return(1);
+	}
+	/* Sort the S3 data records */
+	sort( s3data,
+		ns3data,
+		sizeof(s3datarec_t),
+		s3datarec_compare, NULL);
+
+	result = validate_identity();
+
+	if ( result ) {
+		printk(KERN_ERR "Incompatible firmware image.\n");
+		return(1);
+	}
+
+	if (startaddr == 0x00000000) {
+		printk(KERN_ERR "Can't RAM download a Flash image!\n");
+		return(1);
+	}
+
+	/* Make the image chunks */
+	result = mkimage(fchunk, &nfchunks);
+
+	/* Do any plugging */
+	result = plugimage(fchunk, nfchunks, s3plug, ns3plug,
+						&pda);
+	if ( result ) {
+		printk(KERN_ERR "Failed to plug data.\n");
+		return(1);
+	}
+
+	/* Insert any CRCs */
+	if (crcimage(fchunk, nfchunks, s3crc, ns3crc) ) {
+		printk(KERN_ERR "Failed to insert all CRCs\n");
+		return(1);
+	}
+
+	/* Write the image */
+	result = writeimage(wlandev, fchunk, nfchunks);
+	if ( result ) {
+		printk(KERN_ERR "Failed to ramwrite image data.\n");
+		return(1);
+	}
+
+	/* clear any allocated memory */
+	free_chunks(fchunk, &nfchunks);
+	free_srecs();
+
+	printk(KERN_INFO "prism2_usb: firmware loading finished.\n");
+
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* crcimage
+*
+* Adds a CRC16 in the two bytes prior to each block identified by
+* an S3 CRC record.  Currently, we don't actually do a CRC we just
+* insert the value 0xC0DE in hfa384x order.
+*
+* Arguments:
+*	fchunk		Array of image chunks
+*	nfchunks	Number of image chunks
+*	s3crc		Array of crc records
+*	ns3crc		Number of crc records
+*
+* Returns:
+*	0	success
+*	~0	failure
+----------------------------------------------------------------*/
+int crcimage(imgchunk_t *fchunk, unsigned int nfchunks, s3crcrec_t *s3crc,
+	     unsigned int ns3crc)
+{
+	int	result = 0;
+	int	i;
+	int	c;
+	u32	crcstart;
+	u32	crcend;
+	u32	cstart = 0;
+	u32	cend;
+	u8	*dest;
+	u32	chunkoff;
+
+	for ( i = 0; i < ns3crc; i++ ) {
+		if ( !s3crc[i].dowrite ) continue;
+		crcstart = s3crc[i].addr;
+		crcend =   s3crc[i].addr + s3crc[i].len;
+		/* Find chunk */
+		for ( c = 0; c < nfchunks; c++) {
+			cstart = fchunk[c].addr;
+			cend =	 fchunk[c].addr + fchunk[c].len;
+			/*  the line below does an address & len match search */
+			/*  unfortunately, I've found that the len fields of */
+			/*  some crc records don't match with the length of */
+			/*  the actual data, so we're not checking right */
+			/*  now */
+			/* if ( crcstart-2 >= cstart && crcend <= cend ) break;*/
+
+			/* note the -2 below, it's to make sure the chunk has */
+			/*   space for the CRC value */
+			if ( crcstart-2 >= cstart && crcstart < cend ) break;
+		}
+		if ( c >= nfchunks ) {
+			printk(KERN_ERR
+				"Failed to find chunk for "
+				"crcrec[%d], addr=0x%06x len=%d , "
+				"aborting crc.\n",
+				i, s3crc[i].addr, s3crc[i].len);
+			return 1;
+		}
+
+		/* Insert crc */
+		pr_debug("Adding crc @ 0x%06x\n", s3crc[i].addr-2);
+		chunkoff = crcstart - cstart - 2;
+		dest = fchunk[c].data + chunkoff;
+		*dest =     0xde;
+		*(dest+1) = 0xc0;
+
+	}
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* free_chunks
+*
+* Clears the chunklist data structures in preparation for a new file.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	nothing
+----------------------------------------------------------------*/
+void free_chunks(imgchunk_t *fchunk, unsigned int *nfchunks)
+{
+	int i;
+	for ( i = 0; i < *nfchunks; i++) {
+		if ( fchunk[i].data != NULL ) {
+			kfree(fchunk[i].data);
+		}
+	}
+	*nfchunks = 0;
+	memset( fchunk, 0, sizeof(fchunk));
+
+}
+
+
+/*----------------------------------------------------------------
+* free_srecs
+*
+* Clears the srec data structures in preparation for a new file.
+*
+* Arguments:
+*	none
+*
+* Returns:
+*	nothing
+----------------------------------------------------------------*/
+void free_srecs(void)
+{
+	int i;
+	for ( i = 0; i < ns3data; i++) {
+		kfree(s3data[i].data);
+	}
+	ns3data = 0;
+	memset(s3data, 0, sizeof(s3data));
+	ns3plug = 0;
+	memset(s3plug, 0, sizeof(s3plug));
+	ns3crc = 0;
+	memset(s3crc, 0, sizeof(s3crc));
+	ns3info = 0;
+	memset(s3info, 0, sizeof(s3info));
+	startaddr = 0;
+}
+
+
+/*----------------------------------------------------------------
+* mkimage
+*
+* Scans the currently loaded set of S records for data residing
+* in contiguous memory regions.  Each contiguous region is then
+* made into a 'chunk'.  This function assumes that we're building
+* a new chunk list.  Assumes the s3data items are in sorted order.
+*
+* Arguments:	none
+*
+* Returns:
+*	0	- success
+*	~0	- failure (probably an errno)
+----------------------------------------------------------------*/
+int mkimage(imgchunk_t *clist, unsigned int *ccnt)
+{
+	int		result = 0;
+	int		i;
+	int		j;
+	int		currchunk = 0;
+	u32		nextaddr = 0;
+	u32		s3start;
+	u32		s3end;
+	u32		cstart = 0;
+	u32		cend;
+	u32		coffset;
+
+	/* There may already be data in the chunklist */
+	*ccnt = 0;
+
+	/* Establish the location and size of each chunk */
+	for ( i = 0; i < ns3data; i++) {
+		if ( s3data[i].addr == nextaddr ) {
+			/* existing chunk, grow it */
+			clist[currchunk].len += s3data[i].len;
+			nextaddr += s3data[i].len;
+		} else {
+			/* New chunk */
+			(*ccnt)++;
+			currchunk = *ccnt - 1;
+			clist[currchunk].addr = s3data[i].addr;
+			clist[currchunk].len = s3data[i].len;
+			nextaddr = s3data[i].addr + s3data[i].len;
+			/* Expand the chunk if there is a CRC record at */
+			/* their beginning bound */
+			for ( j = 0; j < ns3crc; j++) {
+				if ( s3crc[j].dowrite &&
+				     s3crc[j].addr == clist[currchunk].addr ) {
+					clist[currchunk].addr -= 2;
+					clist[currchunk].len += 2;
+				}
+			}
+		}
+	}
+
+	/* We're currently assuming there aren't any overlapping chunks */
+	/*  if this proves false, we'll need to add code to coalesce. */
+
+	/* Allocate buffer space for chunks */
+	for ( i = 0; i < *ccnt; i++) {
+		clist[i].data = kmalloc(clist[i].len, GFP_KERNEL);
+		if  ( clist[i].data == NULL ) {
+			printk(KERN_ERR "failed to allocate image space, exitting.\n");
+			return(1);
+		}
+		memset(clist[i].data, 0, clist[i].len);
+	}
+
+
+	/* Display chunks */
+	for ( i = 0; i < *ccnt;  i++) {
+		pr_debug("chunk[%d]: addr=0x%06x len=%d\n",
+			i, clist[i].addr, clist[i].len);
+	}
+
+	/* Copy srec data to chunks */
+	for ( i = 0; i < ns3data; i++) {
+		s3start = s3data[i].addr;
+		s3end   = s3start + s3data[i].len - 1;
+		for ( j = 0; j < *ccnt; j++) {
+			cstart = clist[j].addr;
+			cend = cstart + clist[j].len - 1;
+			if ( s3start >= cstart && s3end <= cend ) {
+				break;
+			}
+		}
+		if ( ((unsigned int)j) >= (*ccnt) ) {
+			printk(KERN_ERR
+				"s3rec(a=0x%06x,l=%d), no chunk match, exiting.\n",
+				s3start, s3data[i].len);
+			return(1);
+		}
+		coffset = s3start - cstart;
+		memcpy( clist[j].data + coffset, s3data[i].data, s3data[i].len);
+	}
+
+	return result;
+}
+
+/*----------------------------------------------------------------
+* mkpdrlist
+*
+* Reads a raw PDA and builds an array of pdrec_t structures.
+*
+* Arguments:
+*	pda	buffer containing raw PDA bytes
+*	pdrec	ptr to an array of pdrec_t's.  Will be filled on exit.
+*	nrec	ptr to a variable that will contain the count of PDRs
+*
+* Returns:
+*	0	- success
+*	~0	- failure (probably an errno)
+----------------------------------------------------------------*/
+int mkpdrlist( pda_t *pda)
+{
+	int	result = 0;
+	u16	*pda16 = (u16*)pda->buf;
+	int	curroff;	/* in 'words' */
+
+	pda->nrec = 0;
+	curroff = 0;
+	while ( curroff < (HFA384x_PDA_LEN_MAX / 2) &&
+		le16_to_cpu(pda16[curroff + 1]) !=
+		HFA384x_PDR_END_OF_PDA ) {
+		pda->rec[pda->nrec] = (hfa384x_pdrec_t*)&(pda16[curroff]);
+
+		if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
+				HFA384x_PDR_NICID) {
+			memcpy(&nicid, &pda->rec[pda->nrec]->data.nicid,
+			       sizeof(nicid));
+			nicid.id = le16_to_cpu(nicid.id);
+			nicid.variant = le16_to_cpu(nicid.variant);
+			nicid.major = le16_to_cpu(nicid.major);
+			nicid.minor = le16_to_cpu(nicid.minor);
+		}
+		if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
+				HFA384x_PDR_MFISUPRANGE) {
+			memcpy(&rfid, &pda->rec[pda->nrec]->data.mfisuprange,
+			       sizeof(rfid));
+			rfid.id = le16_to_cpu(rfid.id);
+			rfid.variant = le16_to_cpu(rfid.variant);
+			rfid.bottom = le16_to_cpu(rfid.bottom);
+			rfid.top = le16_to_cpu(rfid.top);
+		}
+		if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
+				HFA384x_PDR_CFISUPRANGE) {
+			memcpy(&macid, &pda->rec[pda->nrec]->data.cfisuprange,
+			       sizeof(macid));
+			macid.id = le16_to_cpu(macid.id);
+			macid.variant = le16_to_cpu(macid.variant);
+			macid.bottom = le16_to_cpu(macid.bottom);
+			macid.top = le16_to_cpu(macid.top);
+		}
+
+		(pda->nrec)++;
+		curroff += le16_to_cpu(pda16[curroff]) + 1;
+
+	}
+	if ( curroff >= (HFA384x_PDA_LEN_MAX / 2) ) {
+		printk(KERN_ERR
+			"no end record found or invalid lengths in "
+			"PDR data, exiting. %x %d\n", curroff, pda->nrec);
+		return(1);
+	}
+	if (le16_to_cpu(pda16[curroff + 1]) == HFA384x_PDR_END_OF_PDA ) {
+		pda->rec[pda->nrec] = (hfa384x_pdrec_t*)&(pda16[curroff]);
+		(pda->nrec)++;
+	}
+	return result;
+}
+
+
+
+/*----------------------------------------------------------------
+* plugimage
+*
+* Plugs the given image using the given plug records from the given
+* PDA and filename.
+*
+* Arguments:
+*	fchunk		Array of image chunks
+*	nfchunks	Number of image chunks
+*	s3plug		Array of plug records
+*	ns3plug		Number of plug records
+*	pda		Current pda data
+*
+* Returns:
+*	0	success
+*	~0	failure
+----------------------------------------------------------------*/
+int plugimage( imgchunk_t *fchunk, unsigned int nfchunks,
+		s3plugrec_t* s3plug, unsigned int ns3plug, pda_t *pda)
+{
+	int	result = 0;
+	int	i;	/* plug index */
+	int	j;	/* index of PDR or -1 if fname plug */
+	int	c;	/* chunk index */
+	u32	pstart;
+	u32	pend;
+	u32	cstart = 0;
+	u32	cend;
+	u32	chunkoff;
+	u8	*dest;
+
+	/* for each plug record */
+	for ( i = 0; i < ns3plug; i++) {
+		pstart = s3plug[i].addr;
+		pend = 	 s3plug[i].addr + s3plug[i].len;
+		/* find the matching PDR (or filename) */
+		if ( s3plug[i].itemcode != 0xffffffffUL ) { /* not filename */
+			for ( j = 0; j < pda->nrec; j++) {
+				if ( s3plug[i].itemcode ==
+				     le16_to_cpu(pda->rec[j]->code) ) break;
+			}
+		} else {
+			j = -1;
+		}
+		if ( j >= pda->nrec && j != -1 ) { /*  if no matching PDR, fail */
+			printk(KERN_WARNING
+				"warning: Failed to find PDR for "
+				"plugrec 0x%04x.\n",
+				s3plug[i].itemcode);
+			continue; /* and move on to the next PDR */
+#if 0
+			/* MSM: They swear that unless it's the MAC address,
+			 * the serial number, or the TX calibration records,
+			 * then there's reasonable defaults in the f/w
+			 * image.  Therefore, missing PDRs in the card
+			 * should only be a warning, not fatal.
+			 * TODO: add fatals for the PDRs mentioned above.
+			 */
+			result = 1;
+			continue;
+#endif
+		}
+
+		/* Validate plug len against PDR len */
+		if ( j != -1 &&
+		     s3plug[i].len < le16_to_cpu(pda->rec[j]->len) ) {
+			printk(KERN_ERR
+				"error: Plug vs. PDR len mismatch for "
+				"plugrec 0x%04x, abort plugging.\n",
+				s3plug[i].itemcode);
+			result = 1;
+			continue;
+		}
+
+		/* Validate plug address against chunk data and identify chunk */
+		for ( c = 0; c < nfchunks; c++) {
+			cstart = fchunk[c].addr;
+			cend =	 fchunk[c].addr + fchunk[c].len;
+			if ( pstart >= cstart && pend <= cend ) break;
+		}
+		if ( c >= nfchunks ) {
+			printk(KERN_ERR
+				"error: Failed to find image chunk for "
+				"plugrec 0x%04x.\n",
+				s3plug[i].itemcode);
+			result = 1;
+			continue;
+		}
+
+		/* Plug data */
+		chunkoff = pstart - cstart;
+		dest = fchunk[c].data + chunkoff;
+		pr_debug("Plugging item 0x%04x @ 0x%06x, len=%d, "
+			      "cnum=%d coff=0x%06x\n",
+			      s3plug[i].itemcode, pstart, s3plug[i].len,
+			      c, chunkoff);
+
+		if ( j == -1 ) { /* plug the filename */
+			memset(dest, 0, s3plug[i].len);
+			strncpy(dest, PRISM2_USB_FWFILE, s3plug[i].len - 1);
+		} else { /* plug a PDR */
+			memcpy( dest, &(pda->rec[j]->data), s3plug[i].len);
+		}
+	}
+	return result;
+
+}
+
+
+/*----------------------------------------------------------------
+* read_cardpda
+*
+* Sends the command for the driver to read the pda from the card
+* named in the device variable.  Upon success, the card pda is
+* stored in the "cardpda" variables.  Note that the pda structure
+* is considered 'well formed' after this function.  That means
+* that the nrecs is valid, the rec array has been set up, and there's
+* a valid PDAEND record in the raw PDA data.
+*
+* Arguments:
+*	pda		pda structure
+*	wlandev		device
+*
+* Returns:
+*	0	- success
+*	~0	- failure (probably an errno)
+----------------------------------------------------------------*/
+int read_cardpda(pda_t *pda, wlandevice_t *wlandev)
+{
+	int				result = 0;
+	p80211msg_p2req_readpda_t	msg;
+
+	/* set up the msg */
+	msg.msgcode = DIDmsg_p2req_readpda;
+	msg.msglen = sizeof(msg);
+	strcpy(msg.devname, wlandev->name);
+	msg.pda.did = DIDmsg_p2req_readpda_pda;
+	msg.pda.len = HFA384x_PDA_LEN_MAX;
+	msg.pda.status = P80211ENUM_msgitem_status_no_value;
+	msg.resultcode.did = DIDmsg_p2req_readpda_resultcode;
+	msg.resultcode.len = sizeof(u32);
+	msg.resultcode.status = P80211ENUM_msgitem_status_no_value;
+
+	if ( prism2mgmt_readpda(wlandev, &msg) != 0 ) {
+		/* prism2mgmt_readpda prints an errno if appropriate */
+		result = -1;
+	} else if ( msg.resultcode.data == P80211ENUM_resultcode_success ) {
+		memcpy(pda->buf, msg.pda.data, HFA384x_PDA_LEN_MAX);
+		result = mkpdrlist(pda);
+	} else {
+		/* resultcode must've been something other than success */
+		result = -1;
+	}
+
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* copy_line
+*
+* Copies a line of text, up to \n, \0, or SREC_LINE_MAX, or limit of
+* From array
+*
+* Arguments:
+*	from	From addr
+*	to	To addr
+*	limit	Addr of last character in From array that can be copied
+*
+* Returns:
+*	Num characters copied
+----------------------------------------------------------------*/
+int copyline(char *from, char *to, char *limit)
+{
+	int c = 0;
+
+	while ((c < SREC_LINE_MAX - 1) && (from + c <= limit) &&
+	       (from[c] != '\n') && (from[c] != '\0')) {
+		to[c] = from[c];
+		c++;
+	}
+
+	to[c] = '\0';
+	return (c < SREC_LINE_MAX - 1) ? c + 1 : c;
+}
+
+
+/*----------------------------------------------------------------
+* read_srecfile
+*
+* Reads the given srecord file and loads the records into the
+* s3xxx arrays.  This function can be called repeatedly (once for
+* each of a set of files), if necessary.  This function performs
+* no validation of the data except for the grossest of S-record
+* line format checks.  Don't forget that these will be DOS files...
+* CR/LF at the end of each line.
+*
+* Here's the SREC format we're dealing with:
+* S[37]nnaaaaaaaaddd...dddcc
+*
+*       nn - number of bytes starting with the address field
+* aaaaaaaa - address in readable (or big endian) format
+* dd....dd - 0-245 data bytes (two chars per byte)
+*       cc - checksum
+*
+* The S7 record's (there should be only one) address value gets
+* saved in startaddr.  It's the start execution address used
+* for RAM downloads.
+*
+* The S3 records have a collection of subformats indicated by the
+* value of aaaaaaaa:
+*   0xff000000 - Plug record, data field format:
+*                xxxxxxxxaaaaaaaassssssss
+*                x - PDR code number (little endian)
+*                a - Address in load image to plug (little endian)
+*                s - Length of plug data area (little endian)
+*
+*   0xff100000 - CRC16 generation record, data field format:
+*                aaaaaaaassssssssbbbbbbbb
+*                a - Start address for CRC calculation (little endian)
+*                s - Length of data to  calculate over (little endian)
+*                b - Boolean, true=write crc, false=don't write
+*
+*   0xff200000 - Info record, data field format:
+*                ssssttttdd..dd
+*                s - Size in words (little endian)
+*                t - Info type (little endian), see #defines and
+*                    s3inforec_t for details about types.
+*                d - (s - 1) little endian words giving the contents of
+*                    the given info type.
+*
+* Arguments:
+*	rfptr	firmware image (s-record structure) in kernel memory
+*	rfsize	firmware size in kernel memory
+*
+* Returns:
+*	0	- success
+*	~0	- failure (probably an errno)
+----------------------------------------------------------------*/
+int read_srecfile(char *rfptr, int rfsize)
+{
+	int		result = 0;
+	char		buf[SREC_LINE_MAX];
+	char		tmpbuf[30];
+	s3datarec_t	tmprec;
+	int		i, c;
+	int		line = 0;
+	u16		*tmpinfo;
+	char		*endptr = rfptr + rfsize;
+
+
+	pr_debug("Reading S-record file ...\n");
+
+	while ( (c = copyline(rfptr, buf, endptr)) >= 12 ) {
+		rfptr = rfptr + c;
+		line++;
+		if ( buf[0] != 'S' ) {
+			printk(KERN_ERR "%d warning: No initial \'S\'\n", line);
+			return 1;
+		}
+		if ( buf[1] == '7' ) {	/* S7 record, start address */
+			buf[12] = '\0';
+			startaddr = simple_strtoul(buf+4, NULL, 16);
+			pr_debug("  S7 start addr, line=%d "
+				      " addr=0x%08x\n",
+				      line,
+				      startaddr);
+			continue;
+		} else if ( buf[1] == '3') {
+			/* Ok, it's an S3, parse and put it in the right array */
+			/* Record Length field (we only want datalen) */
+			memcpy(tmpbuf, buf+S3LEN_TXTOFFSET, S3LEN_TXTLEN);
+			tmpbuf[S3LEN_TXTLEN] = '\0';
+			tmprec.len = simple_strtoul( tmpbuf, NULL, 16) - 4 - 1; /* 4=addr, 1=cksum */
+			/* Address field */
+			memcpy(tmpbuf, buf+S3ADDR_TXTOFFSET, S3ADDR_TXTLEN);
+			tmpbuf[S3ADDR_TXTLEN] = '\0';
+			tmprec.addr = simple_strtoul( tmpbuf, NULL, 16);
+			/* Checksum field */
+			tmprec.checksum = simple_strtoul( buf+strlen(buf)-2, NULL, 16);
+
+			switch(  tmprec.addr )
+			{
+			case S3ADDR_PLUG:
+				memcpy(tmpbuf, buf+S3PLUG_ITEMCODE_TXTOFFSET, S3PLUG_ITEMCODE_TXTLEN);
+				tmpbuf[S3PLUG_ITEMCODE_TXTLEN] = '\0';
+				s3plug[ns3plug].itemcode = simple_strtoul(tmpbuf,NULL,16);
+				s3plug[ns3plug].itemcode = bswap_32(s3plug[ns3plug].itemcode);
+
+				memcpy(tmpbuf, buf+S3PLUG_ADDR_TXTOFFSET, S3PLUG_ADDR_TXTLEN);
+				tmpbuf[S3PLUG_ADDR_TXTLEN] = '\0';
+				s3plug[ns3plug].addr = simple_strtoul(tmpbuf,NULL,16);
+				s3plug[ns3plug].addr = bswap_32(s3plug[ns3plug].addr);
+
+				memcpy(tmpbuf, buf+S3PLUG_LEN_TXTOFFSET, S3PLUG_LEN_TXTLEN);
+				tmpbuf[S3PLUG_LEN_TXTLEN] = '\0';
+				s3plug[ns3plug].len = simple_strtoul(tmpbuf,NULL,16);
+				s3plug[ns3plug].len = bswap_32(s3plug[ns3plug].len);
+
+				pr_debug("  S3 plugrec, line=%d "
+					      "itemcode=0x%04x addr=0x%08x len=%d\n",
+					      line,
+					      s3plug[ns3plug].itemcode,
+					      s3plug[ns3plug].addr,
+					      s3plug[ns3plug].len);
+
+				ns3plug++;
+				if ( ns3plug == S3PLUG_MAX ) {
+					printk(KERN_ERR "S3 plugrec limit reached - aborting\n");
+					return 1;
+				}
+				break;
+			case S3ADDR_CRC:
+				memcpy(tmpbuf, buf+S3CRC_ADDR_TXTOFFSET, S3CRC_ADDR_TXTLEN);
+				tmpbuf[S3CRC_ADDR_TXTLEN] = '\0';
+				s3crc[ns3crc].addr = simple_strtoul(tmpbuf,NULL,16);
+				s3crc[ns3crc].addr = bswap_32(s3crc[ns3crc].addr);
+
+				memcpy(tmpbuf, buf+S3CRC_LEN_TXTOFFSET, S3CRC_LEN_TXTLEN);
+				tmpbuf[S3CRC_LEN_TXTLEN] = '\0';
+				s3crc[ns3crc].len = simple_strtoul(tmpbuf,NULL,16);
+				s3crc[ns3crc].len = bswap_32(s3crc[ns3crc].len);
+
+				memcpy(tmpbuf, buf+S3CRC_DOWRITE_TXTOFFSET, S3CRC_DOWRITE_TXTLEN);
+				tmpbuf[S3CRC_DOWRITE_TXTLEN] = '\0';
+				s3crc[ns3crc].dowrite = simple_strtoul(tmpbuf,NULL,16);
+				s3crc[ns3crc].dowrite = bswap_32(s3crc[ns3crc].dowrite);
+
+				pr_debug("  S3 crcrec, line=%d "
+					      "addr=0x%08x len=%d write=0x%08x\n",
+					      line,
+					      s3crc[ns3crc].addr,
+					      s3crc[ns3crc].len,
+					      s3crc[ns3crc].dowrite);
+				ns3crc++;
+				if ( ns3crc == S3CRC_MAX ) {
+					printk(KERN_ERR "S3 crcrec limit reached - aborting\n");
+					return 1;
+				}
+				break;
+			case S3ADDR_INFO:
+				memcpy(tmpbuf, buf+S3INFO_LEN_TXTOFFSET, S3INFO_LEN_TXTLEN);
+				tmpbuf[S3INFO_LEN_TXTLEN] = '\0';
+				s3info[ns3info].len = simple_strtoul(tmpbuf,NULL,16);
+				s3info[ns3info].len = bswap_16(s3info[ns3info].len);
+
+				memcpy(tmpbuf, buf+S3INFO_TYPE_TXTOFFSET, S3INFO_TYPE_TXTLEN);
+				tmpbuf[S3INFO_TYPE_TXTLEN] = '\0';
+				s3info[ns3info].type = simple_strtoul(tmpbuf,NULL,16);
+				s3info[ns3info].type = bswap_16(s3info[ns3info].type);
+
+				pr_debug("  S3 inforec, line=%d "
+					      "len=0x%04x type=0x%04x\n",
+					      line,
+					      s3info[ns3info].len,
+					      s3info[ns3info].type);
+				if ( ((s3info[ns3info].len - 1) * sizeof(u16)) > sizeof(s3info[ns3info].info) ) {
+					printk(KERN_ERR " S3 inforec length too long - aborting\n");
+					return 1;
+				}
+
+				tmpinfo = (u16*)&(s3info[ns3info].info.version);
+				for (i = 0; i < s3info[ns3info].len - 1; i++) {
+					memcpy( tmpbuf, buf+S3INFO_DATA_TXTOFFSET+(i*4), 4);
+					tmpbuf[4] = '\0';
+					tmpinfo[i] = simple_strtoul(tmpbuf,NULL,16);
+					tmpinfo[i] = bswap_16(tmpinfo[i]);
+				}
+				pr_debug("            info=");
+				for (i = 0; i < s3info[ns3info].len - 1; i++) {
+					pr_debug("%04x ", tmpinfo[i]);
+				}
+				pr_debug("\n");
+
+				ns3info++;
+				if ( ns3info == S3INFO_MAX ) {
+					printk(KERN_ERR "S3 inforec limit reached - aborting\n");
+					return 1;
+				}
+				break;
+			default:	/* Data record */
+				s3data[ns3data].addr = tmprec.addr;
+				s3data[ns3data].len = tmprec.len;
+				s3data[ns3data].checksum = tmprec.checksum;
+				s3data[ns3data].data = kmalloc(tmprec.len, GFP_KERNEL);
+				for ( i = 0; i < tmprec.len; i++) {
+					memcpy(tmpbuf, buf+S3DATA_TXTOFFSET+(i*2), 2);
+					tmpbuf[2] = '\0';
+					s3data[ns3data].data[i] = simple_strtoul(tmpbuf, NULL, 16);
+				}
+				ns3data++;
+				if ( ns3data == S3DATA_MAX ) {
+					printk(KERN_ERR "S3 datarec limit reached - aborting\n");
+					return 1;
+				}
+				break;
+			}
+		} else {
+			printk(KERN_WARNING "%d warning: Unknown S-record detected.\n", line);
+		}
+	}
+	return result;
+}
+
+
+/*----------------------------------------------------------------
+* s3datarec_compare
+*
+* Comparison function for sort().
+*
+* Arguments:
+*	p1	ptr to the first item
+*	p2	ptr to the second item
+* Returns:
+*	0	items are equal
+*	<0	p1 < p2
+*	>0	p1 > p2
+----------------------------------------------------------------*/
+int s3datarec_compare(const void *p1, const void *p2)
+{
+	const s3datarec_t	*s1 = p1;
+	const s3datarec_t	*s2 = p2;
+	if ( s1->addr == s2->addr ) return 0;
+	if ( s1->addr < s2->addr ) return -1;
+	return 1;
+}
+
+
+/*----------------------------------------------------------------
+* writeimage
+*
+* Takes the chunks, builds p80211 messages and sends them down
+* to the driver for writing to the card.
+*
+* Arguments:
+*	wlandev		device
+*	fchunk		Array of image chunks
+*	nfchunks	Number of image chunks
+*
+* Returns:
+*	0	success
+*	~0	failure
+----------------------------------------------------------------*/
+int writeimage(wlandevice_t *wlandev, imgchunk_t *fchunk, unsigned int nfchunks)
+{
+	int					result = 0;
+	p80211msg_p2req_ramdl_state_t		rstatemsg;
+	p80211msg_p2req_ramdl_write_t		rwritemsg;
+	p80211msg_t				*msgp;
+	u32					resultcode;
+	int					i;
+	int					j;
+	unsigned int				nwrites;
+	u32					curroff;
+	u32					currlen;
+	u32					currdaddr;
+
+	/* Initialize the messages */
+	memset(&rstatemsg, 0, sizeof(rstatemsg));
+	strcpy(rstatemsg.devname, wlandev->name);
+	rstatemsg.msgcode =		DIDmsg_p2req_ramdl_state;
+	rstatemsg.msglen =		sizeof(rstatemsg);
+	rstatemsg.enable.did =		DIDmsg_p2req_ramdl_state_enable;
+	rstatemsg.exeaddr.did =		DIDmsg_p2req_ramdl_state_exeaddr;
+	rstatemsg.resultcode.did =	DIDmsg_p2req_ramdl_state_resultcode;
+	rstatemsg.enable.status =	P80211ENUM_msgitem_status_data_ok;
+	rstatemsg.exeaddr.status =	P80211ENUM_msgitem_status_data_ok;
+	rstatemsg.resultcode.status =	P80211ENUM_msgitem_status_no_value;
+	rstatemsg.enable.len =		sizeof(u32);
+	rstatemsg.exeaddr.len =		sizeof(u32);
+	rstatemsg.resultcode.len =	sizeof(u32);
+
+	memset(&rwritemsg, 0, sizeof(rwritemsg));
+	strcpy(rwritemsg.devname, wlandev->name);
+	rwritemsg.msgcode =		DIDmsg_p2req_ramdl_write;
+	rwritemsg.msglen =		sizeof(rwritemsg);
+	rwritemsg.addr.did =		DIDmsg_p2req_ramdl_write_addr;
+	rwritemsg.len.did =		DIDmsg_p2req_ramdl_write_len;
+	rwritemsg.data.did =		DIDmsg_p2req_ramdl_write_data;
+	rwritemsg.resultcode.did =	DIDmsg_p2req_ramdl_write_resultcode;
+	rwritemsg.addr.status =		P80211ENUM_msgitem_status_data_ok;
+	rwritemsg.len.status =		P80211ENUM_msgitem_status_data_ok;
+	rwritemsg.data.status =		P80211ENUM_msgitem_status_data_ok;
+	rwritemsg.resultcode.status =	P80211ENUM_msgitem_status_no_value;
+	rwritemsg.addr.len =		sizeof(u32);
+	rwritemsg.len.len =		sizeof(u32);
+	rwritemsg.data.len =		WRITESIZE_MAX;
+	rwritemsg.resultcode.len =	sizeof(u32);
+
+	/* Send xxx_state(enable) */
+	pr_debug("Sending dl_state(enable) message.\n");
+	rstatemsg.enable.data = P80211ENUM_truth_true;
+	rstatemsg.exeaddr.data = startaddr;
+
+	msgp = (p80211msg_t*)&rstatemsg;
+	result = prism2mgmt_ramdl_state(wlandev, msgp);
+	if ( result ) {
+		printk(KERN_ERR
+			"writeimage state enable failed w/ result=%d, "
+			"aborting download\n", result);
+		return result;
+	}
+	resultcode = rstatemsg.resultcode.data;
+	if ( resultcode != P80211ENUM_resultcode_success ) {
+		printk(KERN_ERR
+			"writeimage()->xxxdl_state msg indicates failure, "
+			"w/ resultcode=%d, aborting download.\n",
+			resultcode);
+		return 1;
+	}
+
+	/* Now, loop through the data chunks and send WRITESIZE_MAX data */
+	for ( i = 0; i < nfchunks; i++) {
+		nwrites = fchunk[i].len / WRITESIZE_MAX;
+		nwrites += (fchunk[i].len % WRITESIZE_MAX) ? 1 : 0;
+		curroff = 0;
+		for ( j = 0; j < nwrites; j++) {
+			currlen =
+			  (fchunk[i].len - (WRITESIZE_MAX * j)) > WRITESIZE_MAX ?
+			  WRITESIZE_MAX :
+			  (fchunk[i].len - (WRITESIZE_MAX * j));
+			curroff = j * WRITESIZE_MAX;
+			currdaddr = fchunk[i].addr + curroff;
+			/* Setup the message */
+			rwritemsg.addr.data = currdaddr;
+			rwritemsg.len.data = currlen;
+			memcpy(rwritemsg.data.data,
+				fchunk[i].data + curroff,
+				currlen);
+
+			/* Send flashdl_write(pda) */
+			pr_debug("Sending xxxdl_write message addr=%06x len=%d.\n",
+				      currdaddr, currlen);
+
+			msgp = (p80211msg_t*)&rwritemsg;
+			result = prism2mgmt_ramdl_write(wlandev, msgp);
+
+			/* Check the results */
+			if ( result ) {
+				printk(KERN_ERR
+					"writeimage chunk write failed w/ result=%d, "
+					"aborting download\n", result);
+				return result;
+			}
+			resultcode = rstatemsg.resultcode.data;
+			if ( resultcode != P80211ENUM_resultcode_success ) {
+				printk(KERN_ERR
+					"writeimage()->xxxdl_write msg indicates failure, "
+					"w/ resultcode=%d, aborting download.\n",
+					resultcode);
+				return 1;
+			}
+
+		}
+	}
+
+	/* Send xxx_state(disable) */
+	pr_debug("Sending dl_state(disable) message.\n");
+	rstatemsg.enable.data = P80211ENUM_truth_false;
+	rstatemsg.exeaddr.data = 0;
+
+	msgp = (p80211msg_t*)&rstatemsg;
+	result = prism2mgmt_ramdl_state(wlandev, msgp);
+	if ( result ) {
+		printk(KERN_ERR
+			"writeimage state disable failed w/ result=%d, "
+			"aborting download\n", result);
+		return result;
+	}
+	resultcode = rstatemsg.resultcode.data;
+	if ( resultcode != P80211ENUM_resultcode_success ) {
+		printk(KERN_ERR
+			"writeimage()->xxxdl_state msg indicates failure, "
+			"w/ resultcode=%d, aborting download.\n",
+			resultcode);
+		return 1;
+	}
+	return result;
+}
+
+
+
+int validate_identity(void)
+{
+	int i;
+	int result = 1;
+
+	pr_debug("NIC ID: %#x v%d.%d.%d\n",
+	       nicid.id,
+	       nicid.major,
+	       nicid.minor,
+	       nicid.variant);
+	pr_debug("MFI ID: %#x v%d %d->%d\n",
+	       rfid.id,
+	       rfid.variant,
+	       rfid.bottom,
+	       rfid.top);
+	pr_debug("CFI ID: %#x v%d %d->%d\n",
+	       macid.id,
+	       macid.variant,
+	       macid.bottom,
+	       macid.top);
+	pr_debug("PRI ID: %#x v%d %d->%d\n",
+	       priid.id,
+	       priid.variant,
+	       priid.bottom,
+	       priid.top);
+
+	for (i = 0 ; i < ns3info ; i ++) {
+		switch (s3info[i].type) {
+		case 1:
+			pr_debug("Version:  ID %#x %d.%d.%d\n",
+			       s3info[i].info.version.id,
+			       s3info[i].info.version.major,
+				       s3info[i].info.version.minor,
+			       s3info[i].info.version.variant);
+			break;
+		case 2:
+			pr_debug("Compat: Role %#x Id %#x v%d %d->%d\n",
+			       s3info[i].info.compat.role,
+			       s3info[i].info.compat.id,
+			       s3info[i].info.compat.variant,
+			       s3info[i].info.compat.bottom,
+			       s3info[i].info.compat.top);
+
+			/* MAC compat range */
+			if ((s3info[i].info.compat.role == 1) &&
+			    (s3info[i].info.compat.id == 2)) {
+				if (s3info[i].info.compat.variant !=
+				    macid.variant) {
+					result = 2;
+				}
+			}
+
+			/* PRI compat range */
+			if ((s3info[i].info.compat.role == 1) &&
+			    (s3info[i].info.compat.id == 3)) {
+				if ((s3info[i].info.compat.bottom > priid.top) ||
+				    (s3info[i].info.compat.top < priid.bottom)){
+					result = 3;
+				}
+			}
+			/* SEC compat range */
+			if ((s3info[i].info.compat.role == 1) &&
+			    (s3info[i].info.compat.id == 4)) {
+
+			}
+
+			break;
+		case 3:
+				pr_debug("Seq: %#x\n", s3info[i].info.buildseq);
+
+				break;
+		case 4:
+			pr_debug("Platform:  ID %#x %d.%d.%d\n",
+			       s3info[i].info.version.id,
+			       s3info[i].info.version.major,
+			       s3info[i].info.version.minor,
+			       s3info[i].info.version.variant);
+
+			if (nicid.id != s3info[i].info.version.id)
+				continue;
+			if (nicid.major != s3info[i].info.version.major)
+				continue;
+			if (nicid.minor != s3info[i].info.version.minor)
+				continue;
+			if ((nicid.variant != s3info[i].info.version.variant) &&
+			    (nicid.id != 0x8008))
+				continue;
+
+			if (result != 2)
+				result = 0;
+			break;
+		case 0x8001:
+			pr_debug("name inforec len %d\n", s3info[i].len);
+
+			break;
+		default:
+			pr_debug("Unknown inforec type %d\n", s3info[i].type);
+		}
+	}
+	// walk through
+
+	return result;
+}

drivers/staging/wlan-ng/prism2usb.c

@@ -2,6 +2,7 @@
 #include "prism2mgmt.c"
 #include "prism2mib.c"
 #include "prism2sta.c"
+#include "prism2fw.c"
 
 #define PRISM_USB_DEVICE(vid, pid, name) \
            USB_DEVICE(vid, pid),  \
@@ -153,15 +154,16 @@ static int prism2sta_probe_usb(struct usb_interface *interface,
 
 	wlandev->msdstate = WLAN_MSD_HWPRESENT;
 
+	/* Try and load firmware, then enable card before we register */
+	prism2_fwtry(dev, wlandev);
+	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_enable);
+
 	if (register_wlandev(wlandev) != 0) {
 		printk(KERN_ERR "%s: register_wlandev() failed.\n", dev_info);
 		result = -EIO;
 		goto failed;
 	}
 
-/* enable the card */
-	prism2sta_ifstate(wlandev, P80211ENUM_ifstate_enable);
-
 	goto done;
 
 failed:
@@ -170,7 +172,6 @@ failed:
 	wlandev = NULL;
 
 done:
-	p80211_allow_ioctls(wlandev);
 	usb_set_intfdata(interface, wlandev);
 	return result;
 }