Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (67 commits)
  [PATCH] powerpc: Remove oprofile spinlock backtrace code
  [PATCH] powerpc: Add oprofile calltrace support to all powerpc cpus
  [PATCH] powerpc: Add oprofile calltrace support
  [PATCH] for_each_possible_cpu: ppc
  [PATCH] for_each_possible_cpu: powerpc
  [PATCH] lock PTE before updating it in 440/BookE page fault handler
  [PATCH] powerpc: Kill _machine and hard-coded platform numbers
  ppc: Fix compile error in arch/ppc/lib/strcase.c
  [PATCH] git-powerpc: WARN was a dumb idea
  [PATCH] powerpc: a couple of trivial compile warning fixes
  powerpc: remove OCP references
  powerpc: Make uImage default build output for MPC8540 ADS
  powerpc: move math-emu over to arch/powerpc
  powerpc: use memparse() for mem= command line parsing
  ppc: fix strncasecmp prototype
  [PATCH] powerpc: make ISA floppies work again
  [PATCH] powerpc: Fix some initcall return values
  [PATCH] powerpc: Workaround for pSeries RTAS bug
  [PATCH] spufs: fix __init/__exit annotations
  [PATCH] powerpc: add hvc backend for rtas
  ...

Documentation/powerpc/booting-without-of.txt

@@ -719,6 +719,11 @@ address which can extend beyond that limit.
     - model : this is your board name/model
     - #address-cells : address representation for "root" devices
     - #size-cells: the size representation for "root" devices
+    - device_type : This property shouldn't be necessary. However, if
+      you decide to create a device_type for your root node, make sure it
+      is _not_ "chrp" unless your platform is a pSeries or PAPR compliant
+      one for 64-bit, or a CHRP-type machine for 32-bit as this will
+      matched by the kernel this way.
 
   Additionally, some recommended properties are:
 

arch/powerpc/Kconfig

@@ -491,7 +491,7 @@ config PPC601_SYNC_FIX
 	  If in doubt, say Y here.
 
 config TAU
-	bool "Thermal Management Support"
+	bool "On-chip CPU temperature sensor support"
 	depends on 6xx
 	help
 	  G3 and G4 processors have an on-chip temperature sensor called the
@@ -500,7 +500,7 @@ config TAU
 	  on-die temperature in /proc/cpuinfo if the cpu supports it.
 
 	  Unfortunately, on some chip revisions, this sensor is very inaccurate
-	  and in some cases, does not work at all, so don't assume the cpu
+	  and in many cases, does not work at all, so don't assume the cpu
 	  temp is actually what /proc/cpuinfo says it is.
 
 config TAU_INT

arch/powerpc/Kconfig.debug

@@ -110,11 +110,6 @@ config SERIAL_TEXT_DEBUG
 	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
 		PPC_GEN550 || PPC_MPC52xx
 
-config PPC_OCP
-	bool
-	depends on IBM_OCP || XILINX_OCP
-	default y
-
 choice
 	prompt "Early debugging (dangerous)"
 	bool

arch/powerpc/Makefile

@@ -129,13 +129,8 @@ core-y				+= arch/powerpc/kernel/ \
 				   arch/powerpc/lib/ \
 				   arch/powerpc/sysdev/ \
 				   arch/powerpc/platforms/
-core-$(CONFIG_PPC32)		+= arch/ppc/kernel/
-core-$(CONFIG_MATH_EMULATION)	+= arch/ppc/math-emu/
+core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
 core-$(CONFIG_XMON)		+= arch/powerpc/xmon/
-core-$(CONFIG_APUS)		+= arch/ppc/amiga/
-drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
-drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
-drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 

arch/powerpc/configs/cell_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:48 2006
+# Linux kernel version: 2.6.16
+# Thu Mar 23 20:48:09 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -30,6 +30,7 @@ CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
 
@@ -51,7 +52,8 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -85,7 +87,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
 #
@@ -130,7 +132,8 @@ CONFIG_CELL_IIC=y
 #
 # Cell Broadband Engine options
 #
-CONFIG_SPU_FS=y
+CONFIG_SPU_FS=m
+CONFIG_SPUFS_MMAP=y
 
 #
 # Kernel options
@@ -144,7 +147,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_PREEMPT_BKL=y
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_KEXEC=y
@@ -155,13 +158,16 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
@@ -232,6 +238,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
@@ -244,25 +251,7 @@ CONFIG_NETFILTER=y
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
@@ -278,51 +267,13 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
 CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
 
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -355,7 +306,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -408,7 +358,7 @@ CONFIG_FW_LOADER=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -484,7 +434,23 @@ CONFIG_IDEDMA_AUTO=y
 #
 # Multi-device support (RAID and LVM)
 #
-# CONFIG_MD is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
 
 #
 # Fusion MPT device support
@@ -548,7 +514,7 @@ CONFIG_MII=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
+CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -560,7 +526,7 @@ CONFIG_SKGE=m
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-CONFIG_SPIDER_NET=y
+CONFIG_SPIDER_NET=m
 # CONFIG_MV643XX_ETH is not set
 
 #
@@ -678,6 +644,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_RTAS=y
 
 #
 # IPMI
@@ -694,14 +662,13 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_WATCHDOG_RTAS is not set
+CONFIG_WATCHDOG_RTAS=y
 
 #
 # PCI-based Watchdog Cards
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
-# CONFIG_RTC is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -833,6 +800,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -852,7 +820,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+CONFIG_INFINIBAND=y
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 
 #
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -1037,10 +1012,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
 
 #
 # Instrumentation Support
@@ -1058,7 +1029,7 @@ CONFIG_LOG_BUF_SHIFT=15
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set

arch/powerpc/configs/mpc8540_ads_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 
-# Sat Jan 14 15:57:54 2006
+# Linux kernel version: 2.6.16
+# Mon Mar 27 23:37:36 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -18,6 +19,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
@@ -42,7 +44,6 @@ CONFIG_SPE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -58,6 +59,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -72,10 +74,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -90,6 +88,8 @@ CONFIG_BASE_SMALL=0
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -183,6 +183,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -220,6 +221,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -229,11 +235,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -486,6 +487,12 @@ CONFIG_GEN_RTC=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -496,16 +503,13 @@ CONFIG_GEN_RTC=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-
 #
 # Multimedia devices
 #
@@ -531,6 +535,7 @@ CONFIG_HWMON=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -551,7 +556,7 @@ CONFIG_HWMON=y
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -603,7 +608,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -658,6 +662,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -695,6 +700,8 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set

arch/powerpc/kernel/Makefile

@@ -12,12 +12,12 @@ endif
 
 obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
 				   irq.o align.o signal_32.o pmc.o vdso.o \
-				   init_task.o process.o systbl.o
+				   init_task.o process.o systbl.o idle.o
 obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
 				   paca.o cpu_setup_power4.o \
-				   firmware.o sysfs.o idle_64.o
+				   firmware.o sysfs.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 obj-$(CONFIG_POWER4)		+= idle_power4.o
@@ -34,6 +34,11 @@ obj-$(CONFIG_IBMEBUS)           += ibmebus.o
 obj-$(CONFIG_GENERIC_TBSYNC)	+= smp-tbsync.o
 obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
+obj-$(CONFIG_TAU)		+= tau_6xx.o
+obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o
+obj32-$(CONFIG_MODULES)		+= module_32.o
+obj-$(CONFIG_E500)		+= perfmon_fsl_booke.o
 
 ifeq ($(CONFIG_PPC_MERGE),y)
 
@@ -51,7 +56,6 @@ obj-$(CONFIG_PPC64)		+= misc_64.o dma_64.o iommu.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
-obj-$(CONFIG_6xx)		+= idle_6xx.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_PPC_UDBG_16550)	+= legacy_serial.o udbg_16550.o
@@ -77,6 +81,7 @@ smpobj-$(CONFIG_SMP)		+= smp.o
 
 endif
 
+obj-$(CONFIG_PPC32)		+= $(obj32-y)
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o

arch/powerpc/kernel/asm-offsets.c

@@ -105,8 +105,6 @@ int main(void)
 	DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size));
 	DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size));
 	DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page));
-	DEFINE(PLATFORM_LPAR, PLATFORM_LPAR);
-
 	/* paca */
 	DEFINE(PACA_SIZE, sizeof(struct paca_struct));
 	DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index));

arch/powerpc/kernel/entry_32.S

@@ -135,10 +135,10 @@ transfer_to_handler:
 	mfspr	r11,SPRN_HID0
 	mtcr	r11
 BEGIN_FTR_SECTION
-	bt-	8,power_save_6xx_restore	/* Check DOZE */
+	bt-	8,4f			/* Check DOZE */
 END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
 BEGIN_FTR_SECTION
-	bt-	9,power_save_6xx_restore	/* Check NAP */
+	bt-	9,4f			/* Check NAP */
 END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
 #endif /* CONFIG_6xx */
 	.globl transfer_to_handler_cont
@@ -157,6 +157,10 @@ transfer_to_handler_cont:
 	SYNC
 	RFI				/* jump to handler, enable MMU */
 
+#ifdef CONFIG_6xx	
+4:	b	power_save_6xx_restore
+#endif
+
 /*
  * On kernel stack overflow, load up an initial stack pointer
  * and call StackOverflow(regs), which should not return.

arch/powerpc/kernel/entry_64.S

@@ -617,6 +617,12 @@ _GLOBAL(enter_rtas)
 	mfsrr1	r10
 	std	r10,_SRR1(r1)
 
+	/* Temporary workaround to clear CR until RTAS can be modified to
+	 * ignore all bits.
+	 */
+	li	r0,0
+	mtcr	r0
+
 	/* There is no way it is acceptable to get here with interrupts enabled,
 	 * check it with the asm equivalent of WARN_ON
 	 */

arch/powerpc/kernel/firmware.c

@@ -14,7 +14,9 @@
  */
 
 #include <linux/config.h>
+#include <linux/module.h>
 
 #include <asm/firmware.h>
 
-unsigned long ppc64_firmware_features;
+unsigned long powerpc_firmware_features;
+EXPORT_SYMBOL_GPL(powerpc_firmware_features);

arch/powerpc/kernel/head_64.S

@@ -1544,7 +1544,11 @@ _STATIC(__boot_from_prom)
 	mr	r28,r6
 	mr	r27,r7
 
-	/* Align the stack to 16-byte boundary for broken yaboot */
+	/*
+	 * Align the stack to 16-byte boundary
+	 * Depending on the size and layout of the ELF sections in the initial
+	 * boot binary, the stack pointer will be unalignet on PowerMac
+	 */
 	rldicr	r1,r1,0,59
 
 	/* Make sure we are running in 64 bits mode */
@@ -1847,21 +1851,6 @@ _STATIC(start_here_multiplatform)
 	bl	.__save_cpu_setup
 	sync
 
-	/* Setup a valid physical PACA pointer in SPRG3 for early_setup
-	 * note that boot_cpuid can always be 0 nowadays since there is
-	 * nowhere it can be initialized differently before we reach this
-	 * code
-	 */
-	LOAD_REG_IMMEDIATE(r27, boot_cpuid)
-	add	r27,r27,r26
-	lwz	r27,0(r27)
-
-	LOAD_REG_IMMEDIATE(r24, paca) 	/* Get base vaddr of paca array	 */
-	mulli	r13,r27,PACA_SIZE	/* Calculate vaddr of right paca */
-	add	r13,r13,r24		/* for this processor.		 */
-	add	r13,r13,r26		/* convert to physical addr	 */
-	mtspr	SPRN_SPRG3,r13
-	
 	/* Do very early kernel initializations, including initial hash table,
 	 * stab and slb setup before we turn on relocation.	*/
 
@@ -1930,6 +1919,17 @@ _STATIC(start_here_common)
 	/* Not reached */
 	BUG_OPCODE
 
+/* Put the paca pointer into r13 and SPRG3 */
+_GLOBAL(setup_boot_paca)
+	LOAD_REG_IMMEDIATE(r3, boot_cpuid)
+	lwz	r3,0(r3)
+	LOAD_REG_IMMEDIATE(r4, paca) 	/* Get base vaddr of paca array	 */
+	mulli	r3,r3,PACA_SIZE		/* Calculate vaddr of right paca */
+	add	r13,r3,r4		/* for this processor.		 */
+	mtspr	SPRN_SPRG3,r13
+
+	blr
+
 /*
  * We put a few things here that have to be page-aligned.
  * This stuff goes at the beginning of the bss, which is page-aligned.

arch/powerpc/kernel/idle_64.c → arch/powerpc/kernel/idle.c

@@ -2,13 +2,17 @@
  * Idle daemon for PowerPC.  Idle daemon will handle any action
  * that needs to be taken when the system becomes idle.
  *
- * Originally Written by Cort Dougan (cort@cs.nmt.edu)
+ * Originally written by Cort Dougan (cort@cs.nmt.edu).
+ * Subsequent 32-bit hacking by Tom Rini, Armin Kuster,
+ * Paul Mackerras and others.
  *
  * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com>
  *
  * Additional shared processor, SMT, and firmware support
  *    Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com>
  *
+ * 32-bit and 64-bit versions merged by Paul Mackerras <paulus@samba.org>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -29,18 +33,43 @@
 #include <asm/machdep.h>
 #include <asm/smp.h>
 
-extern void power4_idle(void);
+#ifdef CONFIG_HOTPLUG_CPU
+#define cpu_should_die()	(cpu_is_offline(smp_processor_id()) && \
+				 system_state == SYSTEM_RUNNING)
+#else
+#define cpu_should_die()	0
+#endif
 
-void default_idle(void)
+/*
+ * The body of the idle task.
+ */
+void cpu_idle(void)
 {
-	unsigned int cpu = smp_processor_id();
-	set_thread_flag(TIF_POLLING_NRFLAG);
+	if (ppc_md.idle_loop)
+		ppc_md.idle_loop();	/* doesn't return */
 
+	set_thread_flag(TIF_POLLING_NRFLAG);
 	while (1) {
-		if (!need_resched()) {
-			while (!need_resched() && !cpu_is_offline(cpu)) {
-				ppc64_runlatch_off();
+		ppc64_runlatch_off();
 
+		while (!need_resched() && !cpu_should_die()) {
+			if (ppc_md.power_save) {
+				clear_thread_flag(TIF_POLLING_NRFLAG);
+				/*
+				 * smp_mb is so clearing of TIF_POLLING_NRFLAG
+				 * is ordered w.r.t. need_resched() test.
+				 */
+				smp_mb();
+				local_irq_disable();
+
+				/* check again after disabling irqs */
+				if (!need_resched() && !cpu_should_die())
+					ppc_md.power_save();
+
+				local_irq_enable();
+				set_thread_flag(TIF_POLLING_NRFLAG);
+
+			} else {
 				/*
 				 * Go into low thread priority and possibly
 				 * low power mode.
@@ -48,46 +77,18 @@ void default_idle(void)
 				HMT_low();
 				HMT_very_low();
 			}
-
-			HMT_medium();
 		}
 
+		HMT_medium();
 		ppc64_runlatch_on();
+		if (cpu_should_die())
+			cpu_die();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
-		if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
-			cpu_die();
 	}
 }
 
-void native_idle(void)
-{
-	while (1) {
-		ppc64_runlatch_off();
-
-		if (!need_resched())
-			power4_idle();
-
-		if (need_resched()) {
-			ppc64_runlatch_on();
-			preempt_enable_no_resched();
-			schedule();
-			preempt_disable();
-		}
-
-		if (cpu_is_offline(smp_processor_id()) &&
-		    system_state == SYSTEM_RUNNING)
-			cpu_die();
-	}
-}
-
-void cpu_idle(void)
-{
-	BUG_ON(NULL == ppc_md.idle_loop);
-	ppc_md.idle_loop();
-}
-
 int powersave_nap;
 
 #ifdef CONFIG_SYSCTL

arch/powerpc/kernel/idle_6xx.S

@@ -87,19 +87,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
 	cmpwi	0,r3,0
 	beqlr
 
-	/* Clear MSR:EE */
-	mfmsr	r7
-	rlwinm	r0,r7,0,17,15
-	mtmsr	r0
-
-	/* Check current_thread_info()->flags */
-	rlwinm	r4,r1,0,0,18
-	lwz	r4,TI_FLAGS(r4)
-	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq	1f
-	mtmsr	r7	/* out of line this ? */
-	blr
-1:	
 	/* Some pre-nap cleanups needed on some CPUs */
 	andis.	r0,r3,HID0_NAP@h
 	beq	2f
@@ -157,7 +144,8 @@ BEGIN_FTR_SECTION
 	DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-	ori	r7,r7,MSR_EE /* Could be ommited (already set) */
+	mfmsr	r7
+	ori	r7,r7,MSR_EE
 	oris	r7,r7,MSR_POW@h
 	sync
 	isync
@@ -220,8 +208,6 @@ _GLOBAL(nap_save_msscr0)
 _GLOBAL(nap_save_hid1)
 	.space	4*NR_CPUS
 
-_GLOBAL(powersave_nap)
-	.long	0
 _GLOBAL(powersave_lowspeed)
 	.long	0
 

arch/powerpc/kernel/idle_power4.S

@@ -1,11 +1,5 @@
 /*
- *  This file contains the power_save function for 6xx & 7xxx CPUs
- *  rewritten in assembler
- *
- *  Warning ! This code assumes that if your machine has a 750fx
- *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
- *  if this is not the case some additional changes will have to
- *  be done to check a runtime var (a bit like powersave-nap)
+ *  This file contains the power_save function for 970-family CPUs.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -26,49 +20,23 @@
 
 	.text
 
-/*
- * Here is the power_save_6xx function. This could eventually be
- * split into several functions & changing the function pointer
- * depending on the various features.
- */
 _GLOBAL(power4_idle)
 BEGIN_FTR_SECTION
 	blr
 END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
-	/* We must dynamically check for the NAP feature as it
-	 * can be cleared by CPU init after the fixups are done
-	 */
-	LOAD_REG_ADDRBASE(r3,cur_cpu_spec)
-	ld	r4,ADDROFF(cur_cpu_spec)(r3)
-	ld	r4,CPU_SPEC_FEATURES(r4)
-	andi.	r0,r4,CPU_FTR_CAN_NAP
-	beqlr
 	/* Now check if user or arch enabled NAP mode */
 	LOAD_REG_ADDRBASE(r3,powersave_nap)
 	lwz	r4,ADDROFF(powersave_nap)(r3)
 	cmpwi	0,r4,0
 	beqlr
 
-	/* Clear MSR:EE */
-	mfmsr	r7
-	li	r4,0
-	ori	r4,r4,MSR_EE
-	andc	r0,r7,r4
-	mtmsrd	r0
-
-	/* Check current_thread_info()->flags */
-	clrrdi	r4,r1,THREAD_SHIFT
-	ld	r4,TI_FLAGS(r4)
-	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq	1f
-	mtmsrd	r7	/* out of line this ? */
-	blr
-1:
 	/* Go to NAP now */
 BEGIN_FTR_SECTION
 	DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+	mfmsr	r7
+	ori	r7,r7,MSR_EE
 	oris	r7,r7,MSR_POW@h
 	sync
 	isync

arch/powerpc/kernel/irq.c

@@ -379,7 +379,7 @@ void irq_ctx_init(void)
 	struct thread_info *tp;
 	int i;
 
-	for_each_cpu(i) {
+	for_each_possible_cpu(i) {
 		memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
 		tp = softirq_ctx[i];
 		tp->cpu = i;

arch/powerpc/kernel/legacy_serial.c

@@ -37,7 +37,7 @@ static int legacy_serial_console = -1;
 static int __init add_legacy_port(struct device_node *np, int want_index,
 				  int iotype, phys_addr_t base,
 				  phys_addr_t taddr, unsigned long irq,
-				  unsigned int flags)
+				  upf_t flags)
 {
 	u32 *clk, *spd, clock = BASE_BAUD * 16;
 	int index;
@@ -113,7 +113,7 @@ static int __init add_legacy_soc_port(struct device_node *np,
 {
 	phys_addr_t addr;
 	u32 *addrp;
-	unsigned int flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 
 	/* We only support ports that have a clock frequency properly
 	 * encoded in the device-tree.
@@ -236,6 +236,23 @@ static int __init add_legacy_pci_port(struct device_node *np,
 }
 #endif
 
+static void __init setup_legacy_serial_console(int console)
+{
+	struct legacy_serial_info *info =
+		&legacy_serial_infos[console];
+	void __iomem *addr;
+
+	if (info->taddr == 0)
+		return;
+	addr = ioremap(info->taddr, 0x1000);
+	if (addr == NULL)
+		return;
+	if (info->speed == 0)
+		info->speed = udbg_probe_uart_speed(addr, info->clock);
+	DBG("default console speed = %d\n", info->speed);
+	udbg_init_uart(addr, info->speed, info->clock);
+}
+
 /*
  * This is called very early, as part of setup_system() or eventually
  * setup_arch(), basically before anything else in this file. This function
@@ -318,25 +335,8 @@ void __init find_legacy_serial_ports(void)
 #endif
 
 	DBG("legacy_serial_console = %d\n", legacy_serial_console);
-
-	/* udbg is 64 bits only for now, that will change soon though ... */
-	while (legacy_serial_console >= 0) {
-		struct legacy_serial_info *info =
-			&legacy_serial_infos[legacy_serial_console];
-		void __iomem *addr;
-
-		if (info->taddr == 0)
-			break;
-		addr = ioremap(info->taddr, 0x1000);
-		if (addr == NULL)
-			break;
-		if (info->speed == 0)
-			info->speed = udbg_probe_uart_speed(addr, info->clock);
-		DBG("default console speed = %d\n", info->speed);
-		udbg_init_uart(addr, info->speed, info->clock);
-		break;
-	}
-
+	if (legacy_serial_console >= 0)
+		setup_legacy_serial_console(legacy_serial_console);
 	DBG(" <- find_legacy_serial_port()\n");
 }
 

arch/powerpc/kernel/lparcfg.c

@@ -56,7 +56,7 @@ static unsigned long get_purr(void)
 	unsigned long sum_purr = 0;
 	int cpu;
 
-	for_each_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		sum_purr += lppaca[cpu].emulated_time_base;
 
 #ifdef PURR_DEBUG
@@ -222,7 +222,7 @@ static unsigned long get_purr(void)
 	int cpu;
 	struct cpu_usage *cu;
 
-	for_each_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		cu = &per_cpu(cpu_usage_array, cpu);
 		sum_purr += cu->current_tb;
 	}

arch/powerpc/kernel/nvram_64.c

@@ -160,7 +160,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file,
 	case IOC_NVRAM_GET_OFFSET: {
 		int part, offset;
 
-		if (_machine != PLATFORM_POWERMAC)
+		if (!machine_is(powermac))
 			return -EINVAL;
 		if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0)
 			return -EFAULT;
@@ -174,8 +174,9 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file,
 		return 0;
 	}
 #endif /* CONFIG_PPC_PMAC */
+	default:
+		return -EINVAL;
 	}
-	return -EINVAL;
 }
 
 struct file_operations nvram_fops = {
@@ -443,7 +444,7 @@ static int nvram_setup_partition(void)
 	 * in our nvram, as Apple defined partitions use pretty much
 	 * all of the space
 	 */
-	if (_machine == PLATFORM_POWERMAC)
+	if (machine_is(powermac))
 		return -ENOSPC;
 
 	/* see if we have an OS partition that meets our needs.

arch/powerpc/kernel/paca.c

@@ -56,14 +56,11 @@ struct lppaca lppaca[] = {
  * processors.  The processor VPD array needs one entry per physical
  * processor (not thread).
  */
-#define PACA_INIT_COMMON(number, start, asrr, asrv)			    \
+#define PACA_INIT_COMMON(number)					    \
 	.lppaca_ptr = &lppaca[number],					    \
 	.lock_token = 0x8000,						    \
 	.paca_index = (number),		/* Paca Index */		    \
 	.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL,		    \
-	.stab_real = (asrr), 		/* Real pointer to segment table */ \
-	.stab_addr = (asrv),		/* Virt pointer to segment table */ \
-	.cpu_start = (start),		/* Processor start */		    \
 	.hw_cpu_id = 0xffff,
 
 #ifdef CONFIG_PPC_ISERIES
@@ -72,30 +69,20 @@ struct lppaca lppaca[] = {
 
 #define PACA_INIT(number)						    \
 {									    \
-	PACA_INIT_COMMON(number, 0, 0, 0)				    \
-	PACA_INIT_ISERIES(number)					    \
-}
-
-#define BOOTCPU_PACA_INIT(number)					    \
-{									    \
-	PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab)		    \
+	PACA_INIT_COMMON(number)					    \
 	PACA_INIT_ISERIES(number)					    \
 }
 
 #else
 #define PACA_INIT(number)						    \
 {									    \
-	PACA_INIT_COMMON(number, 0, 0, 0)				    \
+	PACA_INIT_COMMON(number)					    \
 }
 
-#define BOOTCPU_PACA_INIT(number)					    \
-{									    \
-	PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab)    \
-}
 #endif
 
 struct paca_struct paca[] = {
-	BOOTCPU_PACA_INIT(0),
+	PACA_INIT(0),
 #if NR_CPUS > 1
 	PACA_INIT(  1), PACA_INIT(  2), PACA_INIT(  3),
 #if NR_CPUS > 4

arch/powerpc/kernel/pci_32.c

@@ -787,7 +787,7 @@ pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
 	 * fix has to be done by making the remapping per-host and always
 	 * filling the pci_to_OF map. --BenH
 	 */
-	if (_machine == _MACH_Pmac && busnr >= 0xf0)
+	if (machine_is(powermac) && busnr >= 0xf0)
 		busnr -= 0xf0;
 	else
 #endif
@@ -1728,7 +1728,7 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
 	 * (bus 0 is HT root), we return the AGP one instead.
 	 */
 #ifdef CONFIG_PPC_PMAC
-	if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4"))
+	if (machine_is(powermac) && machine_is_compatible("MacRISC4"))
 		if (bus == 0)
 			bus = 0xf0;
 #endif /* CONFIG_PPC_PMAC */

arch/powerpc/kernel/pci_64.c

@@ -78,6 +78,7 @@ int global_phb_number;		/* Global phb counter */
 
 /* Cached ISA bridge dev. */
 struct pci_dev *ppc64_isabridge_dev = NULL;
+EXPORT_SYMBOL_GPL(ppc64_isabridge_dev);
 
 static void fixup_broken_pcnet32(struct pci_dev* dev)
 {

arch/powerpc/kernel/proc_ppc64.c

@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 
+#include <asm/machdep.h>
 #include <asm/vdso_datapage.h>
 #include <asm/rtas.h>
 #include <asm/uaccess.h>
@@ -51,7 +52,7 @@ static int __init proc_ppc64_create(void)
 	if (!root)
 		return 1;
 
-	if (!(platform_is_pseries() || _machine == PLATFORM_CELL))
+	if (!machine_is(pseries) && !machine_is(cell))
 		return 0;
 
 	if (!proc_mkdir("rtas", root))

arch/powerpc/kernel/process.c

@@ -45,6 +45,7 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/time.h>
+#include <asm/syscalls.h>
 #ifdef CONFIG_PPC64
 #include <asm/firmware.h>
 #endif
@@ -362,7 +363,11 @@ static void show_instructions(struct pt_regs *regs)
 		if (!(i % 8))
 			printk("\n");
 
-		if (BAD_PC(pc) || __get_user(instr, (unsigned int *)pc)) {
+		/* We use __get_user here *only* to avoid an OOPS on a
+		 * bad address because the pc *should* only be a
+		 * kernel address.
+		 */
+		if (BAD_PC(pc) || __get_user(instr, (unsigned int __user *)pc)) {
 			printk("XXXXXXXX ");
 		} else {
 			if (regs->nip == pc)
@@ -765,7 +770,7 @@ out:
 	return error;
 }
 
-static int validate_sp(unsigned long sp, struct task_struct *p,
+int validate_sp(unsigned long sp, struct task_struct *p,
 		       unsigned long nbytes)
 {
 	unsigned long stack_page = (unsigned long)task_stack_page(p);
@@ -803,6 +808,8 @@ static int validate_sp(unsigned long sp, struct task_struct *p,
 #define FRAME_MARKER	2
 #endif
 
+EXPORT_SYMBOL(validate_sp);
+
 unsigned long get_wchan(struct task_struct *p)
 {
 	unsigned long ip, sp;

arch/powerpc/kernel/prom.c

@@ -383,14 +383,14 @@ static int __devinit finish_node_interrupts(struct device_node *np,
 			/* Apple uses bits in there in a different way, let's
 			 * only keep the real sense bit on macs
 			 */
-			if (_machine == PLATFORM_POWERMAC)
+			if (machine_is(powermac))
 				sense &= 0x1;
 			np->intrs[intrcount].sense = map_mpic_senses[sense];
 		}
 
 #ifdef CONFIG_PPC64
 		/* We offset irq numbers for the u3 MPIC by 128 in PowerMac */
-		if (_machine == PLATFORM_POWERMAC && ic && ic->parent) {
+		if (machine_is(powermac) && ic && ic->parent) {
 			char *name = get_property(ic->parent, "name", NULL);
 			if (name && !strcmp(name, "u3"))
 				np->intrs[intrcount].line += 128;
@@ -570,6 +570,18 @@ int __init of_scan_flat_dt(int (*it)(unsigned long node,
 	return rc;
 }
 
+unsigned long __init of_get_flat_dt_root(void)
+{
+	unsigned long p = ((unsigned long)initial_boot_params) +
+		initial_boot_params->off_dt_struct;
+
+	while(*((u32 *)p) == OF_DT_NOP)
+		p += 4;
+	BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE);
+	p += 4;
+	return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
 /**
  * This  function can be used within scan_flattened_dt callback to get
  * access to properties
@@ -612,6 +624,25 @@ void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
 	} while(1);
 }
 
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+	const char* cp;
+	unsigned long cplen, l;
+
+	cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+	if (cp == NULL)
+		return 0;
+	while (cplen > 0) {
+		if (strncasecmp(cp, compat, strlen(compat)) == 0)
+			return 1;
+		l = strlen(cp) + 1;
+		cp += l;
+		cplen -= l;
+	}
+
+	return 0;
+}
+
 static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
 				       unsigned long align)
 {
@@ -686,7 +717,7 @@ static unsigned long __init unflatten_dt_node(unsigned long mem,
 #ifdef DEBUG
 				if ((strlen(p) + l + 1) != allocl) {
 					DBG("%s: p: %d, l: %d, a: %d\n",
-					    pathp, strlen(p), l, allocl);
+					    pathp, (int)strlen(p), l, allocl);
 				}
 #endif
 				p += strlen(p);
@@ -854,35 +885,73 @@ void __init unflatten_device_tree(void)
 	DBG(" <- unflatten_device_tree()\n");
 }
 
-
 static int __init early_init_dt_scan_cpus(unsigned long node,
-					  const char *uname, int depth, void *data)
+					  const char *uname, int depth,
+					  void *data)
 {
+	static int logical_cpuid = 0;
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+#ifdef CONFIG_ALTIVEC
 	u32 *prop;
-	unsigned long size;
-	char *type = of_get_flat_dt_prop(node, "device_type", &size);
+#endif
+	u32 *intserv;
+	int i, nthreads;
+	unsigned long len;
+	int found = 0;
 
 	/* We are scanning "cpu" nodes only */
 	if (type == NULL || strcmp(type, "cpu") != 0)
 		return 0;
 
-	boot_cpuid = 0;
-	boot_cpuid_phys = 0;
-	if (initial_boot_params && initial_boot_params->version >= 2) {
-		/* version 2 of the kexec param format adds the phys cpuid
-		 * of booted proc.
-		 */
-		boot_cpuid_phys = initial_boot_params->boot_cpuid_phys;
+	/* Get physical cpuid */
+	intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
+	if (intserv) {
+		nthreads = len / sizeof(int);
 	} else {
-		/* Check if it's the boot-cpu, set it's hw index now */
-		if (of_get_flat_dt_prop(node,
+		intserv = of_get_flat_dt_prop(node, "reg", NULL);
+		nthreads = 1;
+	}
+
+	/*
+	 * Now see if any of these threads match our boot cpu.
+	 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
+	 */
+	for (i = 0; i < nthreads; i++) {
+		/*
+		 * version 2 of the kexec param format adds the phys cpuid of
+		 * booted proc.
+		 */
+		if (initial_boot_params && initial_boot_params->version >= 2) {
+			if (intserv[i] ==
+					initial_boot_params->boot_cpuid_phys) {
+				found = 1;
+				break;
+			}
+		} else {
+			/*
+			 * Check if it's the boot-cpu, set it's hw index now,
+			 * unfortunately this format did not support booting
+			 * off secondary threads.
+			 */
+			if (of_get_flat_dt_prop(node,
 					"linux,boot-cpu", NULL) != NULL) {
-			prop = of_get_flat_dt_prop(node, "reg", NULL);
-			if (prop != NULL)
-				boot_cpuid_phys = *prop;
+				found = 1;
+				break;
+			}
 		}
+
+#ifdef CONFIG_SMP
+		/* logical cpu id is always 0 on UP kernels */
+		logical_cpuid++;
+#endif
+	}
+
+	if (found) {
+		DBG("boot cpu: logical %d physical %d\n", logical_cpuid,
+			intserv[i]);
+		boot_cpuid = logical_cpuid;
+		set_hard_smp_processor_id(boot_cpuid, intserv[i]);
 	}
-	set_hard_smp_processor_id(0, boot_cpuid_phys);
 
 #ifdef CONFIG_ALTIVEC
 	/* Check if we have a VMX and eventually update CPU features */
@@ -901,16 +970,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 #endif /* CONFIG_ALTIVEC */
 
 #ifdef CONFIG_PPC_PSERIES
-	/*
-	 * Check for an SMT capable CPU and set the CPU feature. We do
-	 * this by looking at the size of the ibm,ppc-interrupt-server#s
-	 * property
-	 */
-	prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s",
-				       &size);
-	cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
-	if (prop && ((size / sizeof(u32)) > 1))
+	if (nthreads > 1)
 		cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
+	else
+		cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
 #endif
 
 	return 0;
@@ -919,7 +982,6 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 static int __init early_init_dt_scan_chosen(unsigned long node,
 					    const char *uname, int depth, void *data)
 {
-	u32 *prop;
 	unsigned long *lprop;
 	unsigned long l;
 	char *p;
@@ -930,14 +992,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 	    (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
 		return 0;
 
-	/* get platform type */
-	prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL);
-	if (prop == NULL)
-		return 0;
-#ifdef CONFIG_PPC_MULTIPLATFORM
-	_machine = *prop;
-#endif
-
 #ifdef CONFIG_PPC64
 	/* check if iommu is forced on or off */
 	if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
@@ -964,15 +1018,15 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 	 * set of RTAS infos now if available
 	 */
 	{
-		u64 *basep, *entryp;
+		u64 *basep, *entryp, *sizep;
 
 		basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL);
 		entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL);
-		prop = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
-		if (basep && entryp && prop) {
+		sizep = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
+		if (basep && entryp && sizep) {
 			rtas.base = *basep;
 			rtas.entry = *entryp;
-			rtas.size = *prop;
+			rtas.size = *sizep;
 		}
 	}
 #endif /* CONFIG_PPC_RTAS */
@@ -1001,25 +1055,13 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 
 	if (strstr(cmd_line, "mem=")) {
 		char *p, *q;
-		unsigned long maxmem = 0;
 
 		for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
 			q = p + 4;
 			if (p > cmd_line && p[-1] != ' ')
 				continue;
-			maxmem = simple_strtoul(q, &q, 0);
-			if (*q == 'k' || *q == 'K') {
-				maxmem <<= 10;
-				++q;
-			} else if (*q == 'm' || *q == 'M') {
-				maxmem <<= 20;
-				++q;
-			} else if (*q == 'g' || *q == 'G') {
-				maxmem <<= 30;
-				++q;
-			}
+			memory_limit = memparse(q, &q);
 		}
-		memory_limit = maxmem;
 	}
 
 	/* break now */
@@ -1755,7 +1797,7 @@ static int of_finish_dynamic_node(struct device_node *node)
 	/* We don't support that function on PowerMac, at least
 	 * not yet
 	 */
-	if (_machine == PLATFORM_POWERMAC)
+	if (machine_is(powermac))
 		return -ENODEV;
 
 	/* fix up new node's linux_phandle field */

arch/powerpc/kernel/prom_init.c

@@ -180,6 +180,16 @@ static unsigned long __initdata prom_tce_alloc_start;
 static unsigned long __initdata prom_tce_alloc_end;
 #endif
 
+/* Platforms codes are now obsolete in the kernel. Now only used within this
+ * file and ultimately gone too. Feel free to change them if you need, they
+ * are not shared with anything outside of this file anymore
+ */
+#define PLATFORM_PSERIES	0x0100
+#define PLATFORM_PSERIES_LPAR	0x0101
+#define PLATFORM_LPAR		0x0001
+#define PLATFORM_POWERMAC	0x0400
+#define PLATFORM_GENERIC	0x0500
+
 static int __initdata of_platform;
 
 static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
@@ -397,6 +407,11 @@ static void __init __attribute__((noreturn)) prom_panic(const char *reason)
 	reason = PTRRELOC(reason);
 #endif
 	prom_print(reason);
+	/* Do not call exit because it clears the screen on pmac
+	 * it also causes some sort of double-fault on early pmacs */
+	if (RELOC(of_platform) == PLATFORM_POWERMAC)
+		asm("trap\n");
+
 	/* ToDo: should put up an SRC here on p/iSeries */
 	call_prom("exit", 0, 0);
 
@@ -1487,7 +1502,10 @@ static int __init prom_find_machine_type(void)
 	int len, i = 0;
 #ifdef CONFIG_PPC64
 	phandle rtas;
+	int x;
 #endif
+
+	/* Look for a PowerMac */
 	len = prom_getprop(_prom->root, "compatible",
 			   compat, sizeof(compat)-1);
 	if (len > 0) {
@@ -1500,28 +1518,36 @@ static int __init prom_find_machine_type(void)
 			if (strstr(p, RELOC("Power Macintosh")) ||
 			    strstr(p, RELOC("MacRISC")))
 				return PLATFORM_POWERMAC;
-#ifdef CONFIG_PPC64
-			if (strstr(p, RELOC("Momentum,Maple")))
-				return PLATFORM_MAPLE;
-			if (strstr(p, RELOC("IBM,CPB")))
-				return PLATFORM_CELL;
-#endif
 			i += sl + 1;
 		}
 	}
 #ifdef CONFIG_PPC64
+	/* If not a mac, try to figure out if it's an IBM pSeries or any other
+	 * PAPR compliant platform. We assume it is if :
+	 *  - /device_type is "chrp" (please, do NOT use that for future
+	 *    non-IBM designs !
+	 *  - it has /rtas
+	 */
+	len = prom_getprop(_prom->root, "model",
+			   compat, sizeof(compat)-1);
+	if (len <= 0)
+		return PLATFORM_GENERIC;
+	compat[len] = 0;
+	if (strcmp(compat, "chrp"))
+		return PLATFORM_GENERIC;
+
 	/* Default to pSeries. We need to know if we are running LPAR */
 	rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
-	if (PHANDLE_VALID(rtas)) {
-		int x = prom_getproplen(rtas, "ibm,hypertas-functions");
-		if (x != PROM_ERROR) {
-			prom_printf("Hypertas detected, assuming LPAR !\n");
-			return PLATFORM_PSERIES_LPAR;
-		}
+	if (!PHANDLE_VALID(rtas))
+		return PLATFORM_GENERIC;
+	x = prom_getproplen(rtas, "ibm,hypertas-functions");
+	if (x != PROM_ERROR) {
+		prom_printf("Hypertas detected, assuming LPAR !\n");
+		return PLATFORM_PSERIES_LPAR;
 	}
 	return PLATFORM_PSERIES;
 #else
-	return PLATFORM_CHRP;
+	return PLATFORM_GENERIC;
 #endif
 }
 
@@ -2029,7 +2055,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 {	
        	struct prom_t *_prom;
 	unsigned long hdr;
-	u32 getprop_rval;
 	unsigned long offset = reloc_offset();
 
 #ifdef CONFIG_PPC32
@@ -2060,6 +2085,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 */
 	prom_init_stdout();
 
+	/*
+	 * Get default machine type. At this point, we do not differentiate
+	 * between pSeries SMP and pSeries LPAR
+	 */
+	RELOC(of_platform) = prom_find_machine_type();
+
 	/* Bail if this is a kdump kernel. */
 	if (PHYSICAL_START > 0)
 		prom_panic("Error: You can't boot a kdump kernel from OF!\n");
@@ -2069,15 +2100,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 */
 	prom_check_initrd(r3, r4);
 
-	/*
-	 * Get default machine type. At this point, we do not differentiate
-	 * between pSeries SMP and pSeries LPAR
-	 */
-	RELOC(of_platform) = prom_find_machine_type();
-	getprop_rval = RELOC(of_platform);
-	prom_setprop(_prom->chosen, "/chosen", "linux,platform",
-		     &getprop_rval, sizeof(getprop_rval));
-
 #ifdef CONFIG_PPC_PSERIES
 	/*
 	 * On pSeries, inform the firmware about our capabilities

arch/powerpc/kernel/rtas-proc.c

@@ -257,7 +257,7 @@ static int __init proc_rtas_init(void)
 {
 	struct proc_dir_entry *entry;
 
-	if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR)
+	if (!machine_is(pseries))
 		return 1;
 
 	rtas_node = of_find_node_by_name(NULL, "rtas");

arch/powerpc/kernel/rtas.c

@@ -25,6 +25,7 @@
 #include <asm/hvcall.h>
 #include <asm/semaphore.h>
 #include <asm/machdep.h>
+#include <asm/firmware.h>
 #include <asm/page.h>
 #include <asm/param.h>
 #include <asm/system.h>
@@ -32,6 +33,7 @@
 #include <asm/uaccess.h>
 #include <asm/lmb.h>
 #include <asm/udbg.h>
+#include <asm/syscalls.h>
 
 struct rtas_t rtas = {
 	.lock = SPIN_LOCK_UNLOCKED
@@ -591,7 +593,7 @@ static void rtas_percpu_suspend_me(void *info)
 		data->waiting = 0;
 		data->args->args[data->args->nargs] =
 			rtas_call(ibm_suspend_me_token, 0, 1, NULL);
-		for_each_cpu(i)
+		for_each_possible_cpu(i)
 			plpar_hcall_norets(H_PROD,i);
 	} else {
 		data->waiting = -EBUSY;
@@ -624,7 +626,7 @@ static int rtas_ibm_suspend_me(struct rtas_args *args)
 	/* Prod each CPU.  This won't hurt, and will wake
 	 * anyone we successfully put to sleep with H_Join
 	 */
-	for_each_cpu(i)
+	for_each_possible_cpu(i)
 		plpar_hcall_norets(H_PROD, i);
 
 	return data.waiting;
@@ -767,7 +769,7 @@ void __init rtas_initialize(void)
 	 * the stop-self token if any
 	 */
 #ifdef CONFIG_PPC64
-	if (_machine == PLATFORM_PSERIES_LPAR) {
+	if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
 		rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
 		ibm_suspend_me_token = rtas_token("ibm,suspend-me");
 	}

arch/powerpc/kernel/setup-common.c

@@ -9,6 +9,9 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
+
+#undef DEBUG
+
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/string.h>
@@ -41,6 +44,7 @@
 #include <asm/time.h>
 #include <asm/cputable.h>
 #include <asm/sections.h>
+#include <asm/firmware.h>
 #include <asm/btext.h>
 #include <asm/nvram.h>
 #include <asm/setup.h>
@@ -56,8 +60,6 @@
 
 #include "setup.h"
 
-#undef DEBUG
-
 #ifdef DEBUG
 #include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
@@ -65,10 +67,12 @@
 #define DBG(fmt...)
 #endif
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-EXPORT_SYMBOL(_machine);
-#endif
+/* The main machine-dep calls structure
+ */
+struct machdep_calls ppc_md;
+EXPORT_SYMBOL(ppc_md);
+struct machdep_calls *machine_id;
+EXPORT_SYMBOL(machine_id);
 
 unsigned long klimit = (unsigned long) _end;
 
@@ -168,7 +172,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
 #endif /* CONFIG_SMP && CONFIG_PPC32 */
 		seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
-
+		if (ppc_md.name)
+			seq_printf(m, "platform\t: %s\n", ppc_md.name);
 		if (ppc_md.show_cpuinfo != NULL)
 			ppc_md.show_cpuinfo(m);
 
@@ -352,12 +357,13 @@ void __init check_for_initrd(void)
  * must be called before using this.
  *
  * While we're here, we may as well set the "physical" cpu ids in the paca.
+ *
+ * NOTE: This must match the parsing done in early_init_dt_scan_cpus.
  */
 void __init smp_setup_cpu_maps(void)
 {
 	struct device_node *dn = NULL;
 	int cpu = 0;
-	int swap_cpuid = 0;
 
 	while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
 		int *intserv;
@@ -376,30 +382,17 @@ void __init smp_setup_cpu_maps(void)
 		for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
 			cpu_set(cpu, cpu_present_map);
 			set_hard_smp_processor_id(cpu, intserv[j]);
-
-			if (intserv[j] == boot_cpuid_phys)
-				swap_cpuid = cpu;
 			cpu_set(cpu, cpu_possible_map);
 			cpu++;
 		}
 	}
 
-	/* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
-	 * boot cpu is logical 0.
-	 */
-	if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
-		u32 tmp;
-		tmp = get_hard_smp_processor_id(0);
-		set_hard_smp_processor_id(0, boot_cpuid_phys);
-		set_hard_smp_processor_id(swap_cpuid, tmp);
-	}
-
 #ifdef CONFIG_PPC64
 	/*
 	 * On pSeries LPAR, we need to know how many cpus
 	 * could possibly be added to this partition.
 	 */
-	if (_machine == PLATFORM_PSERIES_LPAR &&
+	if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR) &&
 	    (dn = of_find_node_by_path("/rtas"))) {
 		int num_addr_cell, num_size_cell, maxcpus;
 		unsigned int *ireg;
@@ -438,7 +431,7 @@ void __init smp_setup_cpu_maps(void)
 	/*
 	 * Do the sibling map; assume only two threads per processor.
 	 */
-	for_each_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		cpu_set(cpu, cpu_sibling_map[cpu]);
 		if (cpu_has_feature(CPU_FTR_SMT))
 			cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
@@ -468,3 +461,34 @@ static int __init early_xmon(char *p)
 }
 early_param("xmon", early_xmon);
 #endif
+
+void probe_machine(void)
+{
+	extern struct machdep_calls __machine_desc_start;
+	extern struct machdep_calls __machine_desc_end;
+
+	/*
+	 * Iterate all ppc_md structures until we find the proper
+	 * one for the current machine type
+	 */
+	DBG("Probing machine type ...\n");
+
+	for (machine_id = &__machine_desc_start;
+	     machine_id < &__machine_desc_end;
+	     machine_id++) {
+		DBG("  %s ...", machine_id->name);
+		memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls));
+		if (ppc_md.probe()) {
+			DBG(" match !\n");
+			break;
+		}
+		DBG("\n");
+	}
+	/* What can we do if we didn't find ? */
+	if (machine_id >= &__machine_desc_end) {
+		DBG("No suitable machine found !\n");
+		for (;;);
+	}
+
+	printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
+}

arch/powerpc/kernel/setup_32.c

@@ -53,9 +53,6 @@
 extern void platform_init(void);
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
-extern void ppc6xx_idle(void);
-extern void power4_idle(void);
-
 boot_infos_t *boot_infos;
 struct ide_machdep_calls ppc_ide_md;
 
@@ -70,10 +67,6 @@ unsigned int DMA_MODE_WRITE;
 int have_of = 1;
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
-extern void prep_init(void);
-extern void pmac_init(void);
-extern void chrp_init(void);
-
 dev_t boot_dev;
 #endif /* CONFIG_PPC_MULTIPLATFORM */
 
@@ -85,9 +78,6 @@ unsigned long SYSRQ_KEY = 0x54;
 unsigned long vgacon_remap_base;
 #endif
 
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
 /*
  * These are used in binfmt_elf.c to put aux entries on the stack
  * for each elf executable being started.
@@ -111,7 +101,7 @@ unsigned long __init early_init(unsigned long dt_ptr)
 
 	/* First zero the BSS -- use memset_io, some platforms don't have
 	 * caches on yet */
-	memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
+	memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, _end - __bss_start);
 
 	/*
 	 * Identify the CPU type and fix up code sections
@@ -123,48 +113,6 @@ unsigned long __init early_init(unsigned long dt_ptr)
 	return KERNELBASE + offset;
 }
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
-/*
- * The PPC_MULTIPLATFORM version of platform_init...
- */
-void __init platform_init(void)
-{
-	/* if we didn't get any bootinfo telling us what we are... */
-	if (_machine == 0) {
-		/* prep boot loader tells us if we're prep or not */
-		if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
-			_machine = _MACH_prep;
-	}
-
-#ifdef CONFIG_PPC_PREP
-	/* not much more to do here, if prep */
-	if (_machine == _MACH_prep) {
-		prep_init();
-		return;
-	}
-#endif
-
-#ifdef CONFIG_ADB
-	if (strstr(cmd_line, "adb_sync")) {
-		extern int __adb_probe_sync;
-		__adb_probe_sync = 1;
-	}
-#endif /* CONFIG_ADB */
-
-	switch (_machine) {
-#ifdef CONFIG_PPC_PMAC
-	case _MACH_Pmac:
-		pmac_init();
-		break;
-#endif
-#ifdef CONFIG_PPC_CHRP
-	case _MACH_chrp:
-		chrp_init();
-		break;
-#endif
-	}
-}
-#endif
 
 /*
  * Find out what kind of machine we're on and save any data we need
@@ -190,11 +138,17 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys)
 		strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
 #endif /* CONFIG_CMDLINE */
 
-	/* Base init based on machine type */
+#ifdef CONFIG_PPC_MULTIPLATFORM
+	probe_machine();
+#else
+	/* Base init based on machine type. Obsoloete, please kill ! */
 	platform_init();
+#endif
 
 #ifdef CONFIG_6xx
-	ppc_md.power_save = ppc6xx_idle;
+	if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
+	    cpu_has_feature(CPU_FTR_CAN_NAP))
+		ppc_md.power_save = ppc6xx_idle;
 #endif
 
 	if (ppc_md.progress)
@@ -272,7 +226,7 @@ int __init ppc_init(void)
 	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
 
 	/* register CPU devices */
-	for_each_cpu(i)
+	for_each_possible_cpu(i)
 		register_cpu(&cpu_devices[i], i, NULL);
 
 	/* call platform init */
@@ -352,12 +306,6 @@ void __init setup_arch(char **cmdline_p)
 	do_init_bootmem();
 	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
 
-#ifdef CONFIG_PPC_OCP
-	/* Initialize OCP device list */
-	ocp_early_init();
-	if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
-#endif
-
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
 #endif
@@ -366,7 +314,4 @@ void __init setup_arch(char **cmdline_p)
 	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
 
 	paging_init();
-
-	/* this is for modules since _machine can be a define -- Cort */
-	ppc_md.ppc_machine = _machine;
 }

arch/powerpc/kernel/setup_64.c

@@ -73,7 +73,6 @@
 
 int have_of = 1;
 int boot_cpuid = 0;
-int boot_cpuid_phys = 0;
 dev_t boot_dev;
 u64 ppc64_pft_size;
 
@@ -96,11 +95,6 @@ int dcache_bsize;
 int icache_bsize;
 int ucache_bsize;
 
-/* The main machine-dep calls structure
- */
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
 #ifdef CONFIG_MAGIC_SYSRQ
 unsigned long SYSRQ_KEY;
 #endif /* CONFIG_MAGIC_SYSRQ */
@@ -161,32 +155,6 @@ early_param("smt-enabled", early_smt_enabled);
 #define check_smt_enabled()
 #endif /* CONFIG_SMP */
 
-extern struct machdep_calls pSeries_md;
-extern struct machdep_calls pmac_md;
-extern struct machdep_calls maple_md;
-extern struct machdep_calls cell_md;
-extern struct machdep_calls iseries_md;
-
-/* Ultimately, stuff them in an elf section like initcalls... */
-static struct machdep_calls __initdata *machines[] = {
-#ifdef CONFIG_PPC_PSERIES
-	&pSeries_md,
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_PPC_PMAC
-	&pmac_md,
-#endif /* CONFIG_PPC_PMAC */
-#ifdef CONFIG_PPC_MAPLE
-	&maple_md,
-#endif /* CONFIG_PPC_MAPLE */
-#ifdef CONFIG_PPC_CELL
-	&cell_md,
-#endif
-#ifdef CONFIG_PPC_ISERIES
-	&iseries_md,
-#endif
-	NULL
-};
-
 /*
  * Early initialization entry point. This is called by head.S
  * with MMU translation disabled. We rely on the "feature" of
@@ -208,13 +176,10 @@ static struct machdep_calls __initdata *machines[] = {
 
 void __init early_setup(unsigned long dt_ptr)
 {
-	struct paca_struct *lpaca = get_paca();
-	static struct machdep_calls **mach;
-
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 
-	DBG(" -> early_setup()\n");
+ 	DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
 
 	/*
 	 * Do early initializations using the flattened device
@@ -223,22 +188,16 @@ void __init early_setup(unsigned long dt_ptr)
 	 */
 	early_init_devtree(__va(dt_ptr));
 
-	/*
-	 * Iterate all ppc_md structures until we find the proper
-	 * one for the current machine type
-	 */
-	DBG("Probing machine type for platform %x...\n", _machine);
+	/* Now we know the logical id of our boot cpu, setup the paca. */
+	setup_boot_paca();
 
-	for (mach = machines; *mach; mach++) {
-		if ((*mach)->probe(_machine))
-			break;
-	}
-	/* What can we do if we didn't find ? */
-	if (*mach == NULL) {
-		DBG("No suitable machine found !\n");
-		for (;;);
-	}
-	ppc_md = **mach;
+	/* Fix up paca fields required for the boot cpu */
+	get_paca()->cpu_start = 1;
+	get_paca()->stab_real = __pa((u64)&initial_stab);
+	get_paca()->stab_addr = (u64)&initial_stab;
+
+	/* Probe the machine type */
+	probe_machine();
 
 #ifdef CONFIG_CRASH_DUMP
 	kdump_setup();
@@ -260,7 +219,7 @@ void __init early_setup(unsigned long dt_ptr)
 		if (cpu_has_feature(CPU_FTR_SLB))
 			slb_initialize();
 		else
-			stab_initialize(lpaca->stab_real);
+			stab_initialize(get_paca()->stab_real);
 	}
 
 	DBG(" <- early_setup()\n");
@@ -340,7 +299,7 @@ static void __init initialize_cache_info(void)
 			const char *dc, *ic;
 
 			/* Then read cache informations */
-			if (_machine == PLATFORM_POWERMAC) {
+			if (machine_is(powermac)) {
 				dc = "d-cache-block-size";
 				ic = "i-cache-block-size";
 			} else {
@@ -484,7 +443,6 @@ void __init setup_system(void)
 	printk("ppc64_pft_size                = 0x%lx\n", ppc64_pft_size);
 	printk("ppc64_interrupt_controller    = 0x%ld\n",
 	       ppc64_interrupt_controller);
-	printk("platform                      = 0x%x\n", _machine);
 	printk("physicalMemorySize            = 0x%lx\n", lmb_phys_mem_size());
 	printk("ppc64_caches.dcache_line_size = 0x%x\n",
 	       ppc64_caches.dline_size);
@@ -516,7 +474,7 @@ static void __init irqstack_early_init(void)
 	 * interrupt stacks must be under 256MB, we cannot afford to take
 	 * SLB misses on them.
 	 */
-	for_each_cpu(i) {
+	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
 			__va(lmb_alloc_base(THREAD_SIZE,
 					    THREAD_SIZE, 0x10000000));
@@ -549,7 +507,7 @@ static void __init emergency_stack_init(void)
 	 */
 	limit = min(0x10000000UL, lmb.rmo_size);
 
-	for_each_cpu(i)
+	for_each_possible_cpu(i)
 		paca[i].emergency_sp =
 		__va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE;
 }
@@ -602,12 +560,6 @@ void __init setup_arch(char **cmdline_p)
 
 	ppc_md.setup_arch();
 
-	/* Use the default idle loop if the platform hasn't provided one. */
-	if (NULL == ppc_md.idle_loop) {
-		ppc_md.idle_loop = default_idle;
-		printk(KERN_INFO "Using default idle loop\n");
-	}
-
 	paging_init();
 	ppc64_boot_msg(0x15, "Setup Done");
 }
@@ -672,7 +624,7 @@ void __init setup_per_cpu_areas(void)
 		size = PERCPU_ENOUGH_ROOM;
 #endif
 
-	for_each_cpu(i) {
+	for_each_possible_cpu(i) {
 		ptr = alloc_bootmem_node(NODE_DATA(cpu_to_node(i)), size);
 		if (!ptr)
 			panic("Cannot allocate cpu data for CPU %d\n", i);

arch/powerpc/kernel/signal_32.c

@@ -42,6 +42,7 @@
 
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
+#include <asm/syscalls.h>
 #include <asm/sigcontext.h>
 #include <asm/vdso.h>
 #ifdef CONFIG_PPC64

arch/powerpc/kernel/signal_64.c

@@ -33,6 +33,7 @@
 #include <asm/pgtable.h>
 #include <asm/unistd.h>
 #include <asm/cacheflush.h>
+#include <asm/syscalls.h>
 #include <asm/vdso.h>
 
 #define DEBUG_SIG 0
@@ -211,7 +212,7 @@ static inline void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs
         /* Default to using normal stack */
         newsp = regs->gpr[1];
 
-	if (ka->sa.sa_flags & SA_ONSTACK) {
+	if ((ka->sa.sa_flags & SA_ONSTACK) && current->sas_ss_size) {
 		if (! on_sig_stack(regs->gpr[1]))
 			newsp = (current->sas_ss_sp + current->sas_ss_size);
 	}

arch/powerpc/kernel/smp.c

@@ -362,7 +362,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
  
 	smp_space_timers(max_cpus);
 
-	for_each_cpu(cpu)
+	for_each_possible_cpu(cpu)
 		if (cpu != boot_cpuid)
 			smp_create_idle(cpu);
 }

arch/powerpc/kernel/syscalls.c

@@ -40,6 +40,7 @@
 #include <asm/uaccess.h>
 #include <asm/ipc.h>
 #include <asm/semaphore.h>
+#include <asm/syscalls.h>
 #include <asm/time.h>
 #include <asm/unistd.h>
 

arch/powerpc/kernel/sysfs.c

@@ -65,20 +65,20 @@ static int __init smt_setup(void)
 	unsigned int cpu;
 
 	if (!cpu_has_feature(CPU_FTR_SMT))
-		return 1;
+		return -ENODEV;
 
 	options = find_path_device("/options");
 	if (!options)
-		return 1;
+		return -ENODEV;
 
 	val = (unsigned int *)get_property(options, "ibm,smt-snooze-delay",
 					   NULL);
 	if (!smt_snooze_cmdline && val) {
-		for_each_cpu(cpu)
+		for_each_possible_cpu(cpu)
 			per_cpu(smt_snooze_delay, cpu) = *val;
 	}
 
-	return 1;
+	return 0;
 }
 __initcall(smt_setup);
 
@@ -93,7 +93,7 @@ static int __init setup_smt_snooze_delay(char *str)
 	smt_snooze_cmdline = 1;
 
 	if (get_option(&str, &snooze)) {
-		for_each_cpu(cpu)
+		for_each_possible_cpu(cpu)
 			per_cpu(smt_snooze_delay, cpu) = snooze;
 	}
 
@@ -347,7 +347,7 @@ static int __init topology_init(void)
 
 	register_cpu_notifier(&sysfs_cpu_nb);
 
-	for_each_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		struct cpu *c = &per_cpu(cpu_devices, cpu);
 
 #ifdef CONFIG_NUMA

arch/powerpc/kernel/time.c

@@ -261,7 +261,7 @@ void snapshot_timebases(void)
 
 	if (!cpu_has_feature(CPU_FTR_PURR))
 		return;
-	for_each_cpu(cpu)
+	for_each_possible_cpu(cpu)
 		spin_lock_init(&per_cpu(cpu_purr_data, cpu).lock);
 	on_each_cpu(snapshot_tb_and_purr, NULL, 0, 1);
 }
@@ -751,7 +751,7 @@ void __init smp_space_timers(unsigned int max_cpus)
 	 * systems works better if the two threads' timebase interrupts
 	 * are staggered by half a jiffy with respect to each other.
 	 */
-	for_each_cpu(i) {
+	for_each_possible_cpu(i) {
 		if (i == boot_cpuid)
 			continue;
 		if (i == (boot_cpuid ^ 1))

arch/powerpc/kernel/traps.c

@@ -97,7 +97,6 @@ static DEFINE_SPINLOCK(die_lock);
 int die(const char *str, struct pt_regs *regs, long err)
 {
 	static int die_counter, crash_dump_start = 0;
-	int nl = 0;
 
 	if (debugger(regs))
 		return 1;
@@ -106,7 +105,7 @@ int die(const char *str, struct pt_regs *regs, long err)
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
 #ifdef CONFIG_PMAC_BACKLIGHT
-	if (_machine == _MACH_Pmac) {
+	if (machine_is(powermac)) {
 		set_backlight_enable(1);
 		set_backlight_level(BACKLIGHT_MAX);
 	}
@@ -114,46 +113,18 @@ int die(const char *str, struct pt_regs *regs, long err)
 	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
 #ifdef CONFIG_PREEMPT
 	printk("PREEMPT ");
-	nl = 1;
 #endif
 #ifdef CONFIG_SMP
 	printk("SMP NR_CPUS=%d ", NR_CPUS);
-	nl = 1;
 #endif
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	printk("DEBUG_PAGEALLOC ");
-	nl = 1;
 #endif
 #ifdef CONFIG_NUMA
 	printk("NUMA ");
-	nl = 1;
 #endif
-#ifdef CONFIG_PPC64
-	switch (_machine) {
-	case PLATFORM_PSERIES:
-		printk("PSERIES ");
-		nl = 1;
-		break;
-	case PLATFORM_PSERIES_LPAR:
-		printk("PSERIES LPAR ");
-		nl = 1;
-		break;
-	case PLATFORM_ISERIES_LPAR:
-		printk("ISERIES LPAR ");
-		nl = 1;
-		break;
-	case PLATFORM_POWERMAC:
-		printk("POWERMAC ");
-		nl = 1;
-		break;
-	case PLATFORM_CELL:
-		printk("CELL ");
-		nl = 1;
-		break;
-	}
-#endif
-	if (nl)
-		printk("\n");
+	printk("%s\n", ppc_md.name ? "" : ppc_md.name);
+
 	print_modules();
 	show_regs(regs);
 	bust_spinlocks(0);

arch/powerpc/kernel/vdso.c

@@ -33,6 +33,7 @@
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/sections.h>
+#include <asm/firmware.h>
 #include <asm/vdso.h>
 #include <asm/vdso_datapage.h>
 
@@ -667,7 +668,13 @@ void __init vdso_init(void)
 	vdso_data->version.major = SYSTEMCFG_MAJOR;
 	vdso_data->version.minor = SYSTEMCFG_MINOR;
 	vdso_data->processor = mfspr(SPRN_PVR);
-	vdso_data->platform = _machine;
+	/*
+	 * Fake the old platform number for pSeries and iSeries and add
+	 * in LPAR bit if necessary
+	 */
+	vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		vdso_data->platform |= 1;
 	vdso_data->physicalMemorySize = lmb_phys_mem_size();
 	vdso_data->dcache_size = ppc64_caches.dsize;
 	vdso_data->dcache_line_size = ppc64_caches.dline_size;

arch/powerpc/kernel/vmlinux.lds.S

@@ -1,9 +1,11 @@
 #include <linux/config.h>
 #ifdef CONFIG_PPC64
 #include <asm/page.h>
+#define PROVIDE32(x)	PROVIDE(__unused__##x)
 #else
 #define PAGE_SIZE	4096
 #define KERNELBASE	CONFIG_KERNEL_START
+#define PROVIDE32(x)	PROVIDE(x)
 #endif
 #include <asm-generic/vmlinux.lds.h>
 
@@ -18,43 +20,42 @@ jiffies = jiffies_64 + 4;
 #endif
 SECTIONS
 {
-  /* Sections to be discarded. */
-  /DISCARD/ : {
-    *(.exitcall.exit)
-    *(.exit.data)
-  }
-
-  . = KERNELBASE;
-
-  /* Read-only sections, merged into text segment: */
-  .text : {
-    *(.text .text.*)
-    SCHED_TEXT
-    LOCK_TEXT
-    KPROBES_TEXT
-    *(.fixup)
-#ifdef CONFIG_PPC32
-    *(.got1)
-    __got2_start = .;
-    *(.got2)
-    __got2_end = .;
-#else
-    . = ALIGN(PAGE_SIZE);
-    _etext = .;
-#endif
-  }
-#ifdef CONFIG_PPC32
-  _etext = .;
-  PROVIDE (etext = .);
+	/* Sections to be discarded. */
+	/DISCARD/ : {
+	*(.exitcall.exit)
+	*(.exit.data)
+	}
 
-  RODATA
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
+	. = KERNELBASE;
 
-  .fixup   : { *(.fixup) }
-#endif
+/*
+ * Text, read only data and other permanent read-only sections
+ */
+
+	/* Text and gots */
+	.text : {
+		*(.text .text.*)
+		SCHED_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		*(.fixup)
 
+#ifdef CONFIG_PPC32
+		*(.got1)
+		__got2_start = .;
+		*(.got2)
+		__got2_end = .;
+#endif /* CONFIG_PPC32 */
+
+		. = ALIGN(PAGE_SIZE);
+		_etext = .;
+		PROVIDE32 (etext = .);
+	}
+
+	/* Read-only data */
+	RODATA
+
+	/* Exception & bug tables */
 	__ex_table : {
 		__start___ex_table = .;
 		*(__ex_table)
@@ -67,192 +68,172 @@ SECTIONS
 		__stop___bug_table = .;
 	}
 
-#ifdef CONFIG_PPC64
+/*
+ * Init sections discarded at runtime
+ */
+	. = ALIGN(PAGE_SIZE);
+	__init_begin = .;
+
+	.init.text : {
+		_sinittext = .;
+		*(.init.text)
+		_einittext = .;
+	}
+
+	/* .exit.text is discarded at runtime, not link time,
+	 * to deal with references from __bug_table
+	 */
+	.exit.text : { *(.exit.text) }
+
+	.init.data : {
+		*(.init.data);
+		__vtop_table_begin = .;
+		*(.vtop_fixup);
+		__vtop_table_end = .;
+		__ptov_table_begin = .;
+		*(.ptov_fixup);
+		__ptov_table_end = .;
+	}
+
+	. = ALIGN(16);
+	.init.setup : {
+		__setup_start = .;
+		*(.init.setup)
+		__setup_end = .;
+	}
+
+	.initcall.init : {
+		__initcall_start = .;
+		*(.initcall1.init)
+		*(.initcall2.init)
+		*(.initcall3.init)
+		*(.initcall4.init)
+		*(.initcall5.init)
+		*(.initcall6.init)
+		*(.initcall7.init)
+		__initcall_end = .;
+		}
+
+	.con_initcall.init : {
+		__con_initcall_start = .;
+		*(.con_initcall.init)
+		__con_initcall_end = .;
+	}
+
+	SECURITY_INIT
+
+	. = ALIGN(8);
 	__ftr_fixup : {
 		__start___ftr_fixup = .;
 		*(__ftr_fixup)
 		__stop___ftr_fixup = .;
 	}
 
-  RODATA
-#endif
+	. = ALIGN(PAGE_SIZE);
+	.init.ramfs : {
+		__initramfs_start = .;
+		*(.init.ramfs)
+		__initramfs_end = .;
+	}
 
 #ifdef CONFIG_PPC32
-  /* Read-write section, merged into data segment: */
-  . = ALIGN(PAGE_SIZE);
-  _sdata = .;
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.got.plt) *(.got)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-
-  . = ALIGN(PAGE_SIZE);
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(PAGE_SIZE);
-  __nosave_end = .;
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = ALIGN(8192);
-  .data.init_task : { *(.data.init_task) }
+	. = ALIGN(32);
+#else
+	. = ALIGN(128);
 #endif
+	.data.percpu : {
+		__per_cpu_start = .;
+		*(.data.percpu)
+		__per_cpu_end = .;
+	}
 
-  /* will be freed after init */
-  . = ALIGN(PAGE_SIZE);
-  __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	*(.init.text)
-	_einittext = .;
-  }
-#ifdef CONFIG_PPC32
-  /* .exit.text is discarded at runtime, not link time,
-     to deal with references from __bug_table */
-  .exit.text : { *(.exit.text) }
-#endif
-  .init.data : {
-    *(.init.data);
-    __vtop_table_begin = .;
-    *(.vtop_fixup);
-    __vtop_table_end = .;
-    __ptov_table_begin = .;
-    *(.ptov_fixup);
-    __ptov_table_end = .;
-  }
-
-  . = ALIGN(16);
-  .init.setup : {
-    __setup_start = .;
-    *(.init.setup)
-    __setup_end = .;
-  }
-
-  .initcall.init : {
-	__initcall_start = .;
-	*(.initcall1.init)
-	*(.initcall2.init)
-	*(.initcall3.init)
-	*(.initcall4.init)
-	*(.initcall5.init)
-	*(.initcall6.init)
-	*(.initcall7.init)
-	__initcall_end = .;
-  }
-
-  .con_initcall.init : {
-    __con_initcall_start = .;
-    *(.con_initcall.init)
-    __con_initcall_end = .;
-  }
-
-  SECURITY_INIT
+	. = ALIGN(8);
+	.machine.desc : {
+		__machine_desc_start = . ;
+		*(.machine.desc)
+		__machine_desc_end = . ;
+	}
+
+	/* freed after init ends here */
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+
+/*
+ * And now the various read/write data
+ */
+
+	. = ALIGN(PAGE_SIZE);
+	_sdata = .;
 
 #ifdef CONFIG_PPC32
-  __start___ftr_fixup = .;
-  __ftr_fixup : { *(__ftr_fixup) }
-  __stop___ftr_fixup = .;
+	.data    :
+	{
+		*(.data)
+		*(.sdata)
+		*(.got.plt) *(.got)
+	}
 #else
-  . = ALIGN(PAGE_SIZE);
-  .init.ramfs : {
-    __initramfs_start = .;
-    *(.init.ramfs)
-    __initramfs_end = .;
-  }
-#endif
+	.data : {
+		*(.data .data.rel* .toc1)
+		*(.branch_lt)
+	}
 
-#ifdef CONFIG_PPC32
-  . = ALIGN(32);
+	.opd : {
+		*(.opd)
+	}
+
+	.got : {
+		__toc_start = .;
+		*(.got)
+		*(.toc)
+	}
 #endif
-  .data.percpu : {
-    __per_cpu_start = .;
-    *(.data.percpu)
-    __per_cpu_end = .;
-  }
 
- . = ALIGN(PAGE_SIZE);
-#ifdef CONFIG_PPC64
- . = ALIGN(16384);
- __init_end = .;
- /* freed after init ends here */
-
- /* Read/write sections */
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(16384);
- _sdata = .;
- /* The initial task and kernel stack */
- .data.init_task : {
-      *(.data.init_task)
-      }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
-      *(.data.page_aligned)
-      }
-
- .data.cacheline_aligned : {
-      *(.data.cacheline_aligned)
-      }
-
- .data : {
-      *(.data .data.rel* .toc1)
-      *(.branch_lt)
-      }
-
- .opd : {
-      *(.opd)
-      }
-
- .got : {
-      __toc_start = .;
-      *(.got)
-      *(.toc)
-      . = ALIGN(PAGE_SIZE);
-      _edata = .;
-      }
-
-  . = ALIGN(PAGE_SIZE);
+	. = ALIGN(PAGE_SIZE);
+	_edata  =  .;
+	PROVIDE32 (edata = .);
+
+	/* The initial task and kernel stack */
+#ifdef CONFIG_PPC32
+	. = ALIGN(8192);
 #else
-  __initramfs_start = .;
-  .init.ramfs : {
-    *(.init.ramfs)
-  }
-  __initramfs_end = .;
+	. = ALIGN(16384);
+#endif
+	.data.init_task : {
+		*(.data.init_task)
+	}
 
-  . = ALIGN(4096);
-  __init_end = .;
+	. = ALIGN(PAGE_SIZE);
+	.data.page_aligned : {
+		*(.data.page_aligned)
+	}
 
-  . = ALIGN(4096);
-  _sextratext = .;
-  _eextratext = .;
+	.data.cacheline_aligned : {
+		*(.data.cacheline_aligned)
+	}
 
-  __bss_start = .;
-#endif
+	. = ALIGN(PAGE_SIZE);
+	__data_nosave : {
+		__nosave_begin = .;
+		*(.data.nosave)
+		. = ALIGN(PAGE_SIZE);
+		__nosave_end = .;
+	}
 
-  .bss : {
-    __bss_start = .;
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  __bss_stop = .;
-  }
+/*
+ * And finally the bss
+ */
+
+	.bss : {
+		__bss_start = .;
+		*(.sbss) *(.scommon)
+		*(.dynbss)
+		*(.bss)
+		*(COMMON)
+		__bss_stop = .;
+	}
 
-#ifdef CONFIG_PPC64
-  . = ALIGN(PAGE_SIZE);
-#endif
-  _end = . ;
-#ifdef CONFIG_PPC32
-  PROVIDE (end = .);
-#endif
+	. = ALIGN(PAGE_SIZE);
+	_end = . ;
+	PROVIDE32 (end = .);
 }

arch/powerpc/lib/sstep.c

@@ -18,7 +18,7 @@ extern char system_call_common[];
 
 #ifdef CONFIG_PPC64
 /* Bits in SRR1 that are copied from MSR */
-#define MSR_MASK	0xffffffff87c0ffff
+#define MSR_MASK	0xffffffff87c0ffffUL
 #else
 #define MSR_MASK	0x87c0ffff
 #endif