ARM: mmp: add usb device support for PXA910

Add usb device support for Marvell PXA910.
Actually PXA920 will use the same device.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

arch/arm/mach-mmp/Kconfig

@@ -113,4 +113,11 @@ config CPU_MMP2
 	select CPU_PJ4
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
+
+config USB_EHCI_MV_U2O
+        bool "EHCI support for PXA USB OTG controller"
+	depends on USB_EHCI_MV
+	help
+	  Enables support for OTG controller which can be switched to host mode.
+
 endif

arch/arm/mach-mmp/devices.c

@@ -9,9 +9,13 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
 
 #include <asm/irq.h>
+#include <mach/irqs.h>
 #include <mach/devices.h>
+#include <mach/cputype.h>
+#include <mach/regs-usb.h>
 
 int __init pxa_register_device(struct pxa_device_desc *desc,
 				void *data, size_t size)
@@ -67,3 +71,281 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 
 	return platform_device_add(pdev);
 }
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET)
+
+/*****************************************************************************
+ * The registers read/write routines
+ *****************************************************************************/
+
+static unsigned int u2o_get(void __iomem *base, unsigned int offset)
+{
+	return readl_relaxed(base + offset);
+}
+
+static void u2o_set(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg |= value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static void u2o_clear(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg &= ~value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static void u2o_write(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	writel_relaxed(value, base + offset);
+	readl_relaxed(base + offset);
+}
+
+#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV)
+
+#if defined(CONFIG_CPU_PXA910)
+
+static DEFINE_MUTEX(phy_lock);
+static int phy_init_cnt;
+
+static int usb_phy_init_internal(void __iomem *base)
+{
+	int loops;
+
+	pr_info("Init usb phy!!!\n");
+
+	/* Initialize the USB PHY power */
+	if (cpu_is_pxa910()) {
+		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
+			| (1<<UTMI_CTRL_PU_REF_SHIFT));
+	}
+
+	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+
+	/* UTMI_PLL settings */
+	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
+		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
+		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
+		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
+
+	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
+		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
+		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
+		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
+
+	/* UTMI_TX */
+	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
+		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
+		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
+		| UTMI_TX_AMP_MASK);
+	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
+		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
+		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
+
+	/* UTMI_RX */
+	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
+		| UTMI_REG_SQ_LENGTH_MASK);
+	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
+		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
+
+	/* UTMI_IVREF */
+	if (cpu_is_pxa168())
+		/* fixing Microsoft Altair board interface with NEC hub issue -
+		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
+		u2o_write(base, UTMI_IVREF, 0x4bf);
+
+	/* toggle VCOCAL_START bit of UTMI_PLL */
+	udelay(200);
+	u2o_set(base, UTMI_PLL, VCOCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_PLL, VCOCAL_START);
+
+	/* toggle REG_RCAL_START bit of UTMI_TX */
+	udelay(400);
+	u2o_set(base, UTMI_TX, REG_RCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_TX, REG_RCAL_START);
+	udelay(400);
+
+	/* Make sure PHY PLL is ready */
+	loops = 0;
+	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
+		mdelay(1);
+		loops++;
+		if (loops > 100) {
+			printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
+				u2o_get(base, UTMI_PLL));
+			break;
+		}
+	}
+
+	if (cpu_is_pxa168()) {
+		u2o_set(base, UTMI_RESERVE, 1 << 5);
+		/* Turn on UTMI PHY OTG extension */
+		u2o_write(base, UTMI_OTG_ADDON, 1);
+	}
+
+	return 0;
+}
+
+static int usb_phy_deinit_internal(void __iomem *base)
+{
+	pr_info("Deinit usb phy!!!\n");
+
+	if (cpu_is_pxa168())
+		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
+
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
+	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+
+	return 0;
+}
+
+int pxa_usb_phy_init(void __iomem *phy_reg)
+{
+	mutex_lock(&phy_lock);
+	if (phy_init_cnt++ == 0)
+		usb_phy_init_internal(phy_reg);
+	mutex_unlock(&phy_lock);
+	return 0;
+}
+
+void pxa_usb_phy_deinit(void __iomem *phy_reg)
+{
+	WARN_ON(phy_init_cnt == 0);
+
+	mutex_lock(&phy_lock);
+	if (--phy_init_cnt == 0)
+		usb_phy_deinit_internal(phy_reg);
+	mutex_unlock(&phy_lock);
+}
+#endif
+#endif
+#endif
+
+#ifdef CONFIG_USB_SUPPORT
+static u64 usb_dma_mask = ~(u32)0;
+
+#ifdef CONFIG_USB_MV_UDC
+struct resource pxa168_u2o_resources[] = {
+	/* regbase */
+	[0] = {
+		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "capregs",
+	},
+	/* phybase */
+	[1] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "phyregs",
+	},
+	[2] = {
+		.start	= IRQ_PXA168_USB1,
+		.end	= IRQ_PXA168_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_u2o = {
+	.name		= "mv-udc",
+	.id		= -1,
+	.resource	= pxa168_u2o_resources,
+	.num_resources	= ARRAY_SIZE(pxa168_u2o_resources),
+	.dev		=  {
+		.dma_mask	= &usb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	}
+};
+#endif /* CONFIG_USB_MV_UDC */
+
+#ifdef CONFIG_USB_EHCI_MV_U2O
+struct resource pxa168_u2oehci_resources[] = {
+	/* regbase */
+	[0] = {
+		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "capregs",
+	},
+	/* phybase */
+	[1] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "phyregs",
+	},
+	[2] = {
+		.start	= IRQ_PXA168_USB1,
+		.end	= IRQ_PXA168_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_u2oehci = {
+	.name		= "pxa-u2oehci",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &usb_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+
+	.num_resources	= ARRAY_SIZE(pxa168_u2oehci_resources),
+	.resource	= pxa168_u2oehci_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_MV_OTG)
+struct resource pxa168_u2ootg_resources[] = {
+	/* regbase */
+	[0] = {
+		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "capregs",
+	},
+	/* phybase */
+	[1] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "phyregs",
+	},
+	[2] = {
+		.start	= IRQ_PXA168_USB1,
+		.end	= IRQ_PXA168_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_u2ootg = {
+	.name		= "mv-otg",
+	.id		= -1,
+	.dev  = {
+		.dma_mask          = &usb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+
+	.num_resources	= ARRAY_SIZE(pxa168_u2ootg_resources),
+	.resource      = pxa168_u2ootg_resources,
+};
+#endif /* CONFIG_USB_MV_OTG */
+
+#endif

arch/arm/mach-mmp/include/mach/devices.h

@@ -50,4 +50,7 @@ struct pxa_device_desc mmp2_device_##_name __initdata = {		\
 }
 
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
+extern int pxa_usb_phy_init(void __iomem *phy_reg);
+extern void pxa_usb_phy_deinit(void __iomem *phy_reg);
+
 #endif /* __MACH_DEVICE_H */

arch/arm/mach-mmp/include/mach/pxa910.h

@@ -20,6 +20,9 @@ extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa168_device_u2o;
+extern struct platform_device pxa168_device_u2ootg;
+extern struct platform_device pxa168_device_u2oehci;
 
 extern struct platform_device pxa910_device_gpio;
 extern struct platform_device pxa910_device_rtc;

arch/arm/mach-mmp/include/mach/regs-usb.h

@@ -0,0 +1,253 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_H
+#define __ASM_ARCH_REGS_USB_H
+
+#define PXA168_U2O_REGBASE	(0xd4208000)
+#define PXA168_U2O_PHYBASE	(0xd4207000)
+
+#define PXA168_U2H_REGBASE      (0xd4209000)
+#define PXA168_U2H_PHYBASE      (0xd4206000)
+
+#define MMP3_HSIC1_REGBASE	(0xf0001000)
+#define MMP3_HSIC1_PHYBASE	(0xf0001800)
+
+#define MMP3_HSIC2_REGBASE	(0xf0002000)
+#define MMP3_HSIC2_PHYBASE	(0xf0002800)
+
+#define MMP3_FSIC_REGBASE	(0xf0003000)
+#define MMP3_FSIC_PHYBASE	(0xf0003800)
+
+
+#define USB_REG_RANGE		(0x1ff)
+#define USB_PHY_RANGE		(0xff)
+
+/* registers */
+#define U2x_CAPREGS_OFFSET       0x100
+
+/* phy regs */
+#define UTMI_REVISION		0x0
+#define UTMI_CTRL		0x4
+#define UTMI_PLL		0x8
+#define UTMI_TX			0xc
+#define UTMI_RX			0x10
+#define UTMI_IVREF		0x14
+#define UTMI_T0			0x18
+#define UTMI_T1			0x1c
+#define UTMI_T2			0x20
+#define UTMI_T3			0x24
+#define UTMI_T4			0x28
+#define UTMI_T5			0x2c
+#define UTMI_RESERVE		0x30
+#define UTMI_USB_INT		0x34
+#define UTMI_DBG_CTL		0x38
+#define UTMI_OTG_ADDON		0x3c
+
+/* For UTMICTRL Register */
+#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
+/* pxa168 */
+#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
+#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
+#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
+#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
+
+#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
+#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
+#define UTMI_CTRL_PU_REF_SHIFT			20
+#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
+#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
+#define UTMI_CTRL_PWR_UP_SHIFT                  0
+
+/* For UTMI_PLL Register */
+#define UTMI_PLL_PLLCALI12_SHIFT		29
+#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
+
+#define UTMI_PLL_PLLVDD18_SHIFT			27
+#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
+
+#define UTMI_PLL_PLLVDD12_SHIFT			25
+#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
+
+#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
+#define CLK_BLK_EN                              (0x1 << 24)
+#define PLL_READY                               (0x1 << 23)
+#define KVCO_EXT                                (0x1 << 22)
+#define VCOCAL_START                            (0x1 << 21)
+
+#define UTMI_PLL_KVCO_SHIFT			15
+#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
+
+#define UTMI_PLL_ICP_SHIFT			12
+#define UTMI_PLL_ICP_MASK                       (0x7 << 12)
+
+#define UTMI_PLL_FBDIV_SHIFT                    4
+#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
+
+#define UTMI_PLL_REFDIV_SHIFT                   0
+#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
+
+/* For UTMI_TX Register */
+#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
+#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
+
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
+
+#define UTMI_TX_TXVDD12_SHIFT                   22
+#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
+
+#define UTMI_TX_CK60_PHSEL_SHIFT                17
+#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
+
+#define UTMI_TX_IMPCAL_VTH_SHIFT                14
+#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
+
+#define REG_RCAL_START                          (0x1 << 12)
+
+#define UTMI_TX_LOW_VDD_EN_SHIFT                11
+
+#define UTMI_TX_AMP_SHIFT			0
+#define UTMI_TX_AMP_MASK			(0x7 << 0)
+
+/* For UTMI_RX Register */
+#define UTMI_REG_SQ_LENGTH_SHIFT                15
+#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
+
+#define UTMI_RX_SQ_THRESH_SHIFT                 4
+#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
+
+#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
+
+/* For MMP3 USB Phy */
+#define USB2_PLL_REG0		0x4
+#define USB2_PLL_REG1		0x8
+#define USB2_TX_REG0		0x10
+#define USB2_TX_REG1		0x14
+#define USB2_TX_REG2		0x18
+#define USB2_RX_REG0		0x20
+#define USB2_RX_REG1		0x24
+#define USB2_RX_REG2		0x28
+#define USB2_ANA_REG0		0x30
+#define USB2_ANA_REG1		0x34
+#define USB2_ANA_REG2		0x38
+#define USB2_DIG_REG0		0x3C
+#define USB2_DIG_REG1		0x40
+#define USB2_DIG_REG2		0x44
+#define USB2_DIG_REG3		0x48
+#define USB2_TEST_REG0		0x4C
+#define USB2_TEST_REG1		0x50
+#define USB2_TEST_REG2		0x54
+#define USB2_CHARGER_REG0	0x58
+#define USB2_OTG_REG0		0x5C
+#define USB2_PHY_MON0		0x60
+#define USB2_RESETVE_REG0	0x64
+#define USB2_ICID_REG0		0x78
+#define USB2_ICID_REG1		0x7C
+
+/* USB2_PLL_REG0 */
+/* This is for Ax stepping */
+#define USB2_PLL_FBDIV_SHIFT_MMP3		0
+#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)
+
+#define USB2_PLL_REFDIV_SHIFT_MMP3		8
+#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)
+
+#define USB2_PLL_VDD12_SHIFT_MMP3		12
+#define USB2_PLL_VDD18_SHIFT_MMP3		14
+
+/* This is for B0 stepping */
+#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
+#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
+#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
+#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
+#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00
+
+#define USB2_PLL_CAL12_SHIFT_MMP3		0
+#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)
+
+#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2
+
+#define USB2_PLL_KVCO_SHIFT_MMP3		4
+#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)
+
+#define USB2_PLL_ICP_SHIFT_MMP3			8
+#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)
+
+#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12
+
+#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
+#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)
+
+#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)
+
+/* USB2_TX_REG0 */
+#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
+#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)
+
+#define USB2_TX_RCAL_START_SHIFT_MMP3		13
+
+/* USB2_TX_REG1 */
+#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
+#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)
+
+#define USB2_TX_AMP_SHIFT_MMP3			4
+#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)
+
+#define USB2_TX_VDD12_SHIFT_MMP3		8
+#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)
+
+/* USB2_TX_REG2 */
+#define USB2_TX_DRV_SLEWRATE_SHIFT		10
+
+/* USB2_RX_REG0 */
+#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
+#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)
+
+#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
+#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)
+
+/* USB2_ANA_REG1*/
+#define USB2_ANA_PU_ANA_SHIFT_MMP3		14
+
+/* USB2_OTG_REG0 */
+#define USB2_OTG_PU_OTG_SHIFT_MMP3		3
+
+/* fsic registers */
+#define FSIC_MISC			0x4
+#define FSIC_INT			0x28
+#define FSIC_CTRL			0x30
+
+/* HSIC registers */
+#define HSIC_PAD_CTRL			0x4
+
+#define HSIC_CTRL			0x8
+#define HSIC_CTRL_HSIC_ENABLE		(1<<7)
+#define HSIC_CTRL_PLL_BYPASS		(1<<4)
+
+#define TEST_GRP_0			0xc
+#define TEST_GRP_1			0x10
+
+#define HSIC_INT			0x14
+#define HSIC_INT_READY_INT_EN		(1<<10)
+#define HSIC_INT_CONNECT_INT_EN		(1<<9)
+#define HSIC_INT_CORE_INT_EN		(1<<8)
+#define HSIC_INT_HS_READY		(1<<2)
+#define HSIC_INT_CONNECT		(1<<1)
+#define HSIC_INT_CORE			(1<<0)
+
+#define HSIC_CONFIG			0x18
+#define USBHSIC_CTRL			0x20
+
+#define HSIC_USB_CTRL			0x28
+#define HSIC_USB_CTRL_CLKEN		1
+#define	HSIC_USB_CLK_PHY		0x0
+#define HSIC_USB_CLK_PMU		0x1
+
+#endif /* __ASM_ARCH_PXA_U2O_H */

arch/arm/mach-mmp/pxa910.c

@@ -109,7 +109,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
+	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };