Merge tag 'davinci-for-v3.10/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

From Sekhar Nori <nsekhar@ti.com>:

v3.10 DT updates for DaVinci

The pull request adds support for MMC/SD and regulator on DA850 EVM.

* tag 'davinci-for-v3.10/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da850: override mmc DT node device name
  ARM: davinci: da850: add mmc DT entries
  mmc: davinci_mmc: add DT support
  ARM: davinci: da850: add tps6507x regulator DT data
  ARM: regulator: add tps6507x device tree data

Merged into soc branch rather than DT branch to avoid circular dependencies.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/mmc/davinci_mmc.txt

@@ -0,0 +1,33 @@
+* TI Highspeed MMC host controller for DaVinci
+
+The Highspeed MMC Host Controller on TI DaVinci family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents the properties used by the davinci_mmc driver.
+
+Required properties:
+- compatible:
+ Should be "ti,da830-mmc": for da830, da850, dm365
+ Should be "ti,dm355-mmc": for dm355, dm644x
+
+Optional properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
+- max-frequency: Maximum operating clock frequency, default 25MHz.
+- dmas: List of DMA specifiers with the controller specific format
+	as described in the generic DMA client binding. A tx and rx
+	specifier is required.
+- dma-names: RX and TX  DMA request names. These strings correspond
+	1:1 with the DMA specifiers listed in dmas.
+
+Example:
+mmc0: mmc@1c40000 {
+	compatible = "ti,da830-mmc",
+	reg = <0x40000 0x1000>;
+	interrupts = <16>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	dmas = <&edma 16
+		&edma 17>;
+	dma-names = "rx", "tx";
+};

arch/arm/boot/dts/da850-evm.dts

@@ -35,14 +35,84 @@
 			clock-frequency = <100000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins>;
+
+			tps: tps@48 {
+				reg = <0x48>;
+			};
 		};
 		wdt: wdt@1c21000 {
 			status = "okay";
 		};
+		mmc0: mmc@1c40000 {
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+		};
 	};
 	nand_cs3@62000000 {
 		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&nand_cs3_pins>;
 	};
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+/include/ "tps6507x.dtsi"
+
+&tps {
+	vdcdc1_2-supply = <&vbat>;
+	vdcdc3-supply = <&vbat>;
+	vldo1_2-supply = <&vbat>;
+
+	regulators {
+		vdcdc1_reg: regulator@0 {
+			regulator-name = "VDCDC1_3.3V";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdcdc2_reg: regulator@1 {
+			regulator-name = "VDCDC2_3.3V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		vdcdc3_reg: regulator@2 {
+			regulator-name = "VDCDC3_1.2V";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "LDO1_1.8V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "LDO2_1.2V";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1320000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
 };

arch/arm/boot/dts/da850.dtsi

@@ -62,6 +62,15 @@
 					0x10 0x00002200 0x0000ff00
 				>;
 			};
+			mmc0_pins: pinmux_mmc_pins {
+				pinctrl-single,bits = <
+					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
+					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
+					 * MMCSD0_CMD    MMCSD0_CLK
+					 */
+					0x28 0x00222222  0x00ffffff
+				>;
+			};
 		};
 		serial0: serial@1c42000 {
 			compatible = "ns16550a";
@@ -107,6 +116,12 @@
 			reg = <0x21000 0x1000>;
 			status = "disabled";
 		};
+		mmc0: mmc@1c40000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x40000 0x1000>;
+			interrupts = <16>;
+			status = "disabled";
+		};
 	};
 	nand_cs3@62000000 {
 		compatible = "ti,davinci-nand";

arch/arm/boot/dts/tps6507x.dtsi

@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65070.pdf
+ */
+
+&tps {
+	compatible = "ti,tps6507x";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "VDCDC1";
+		};
+
+		vdcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "VDCDC2";
+		};
+
+		vdcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "VDCDC3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "LDO1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "LDO2";
+		};
+
+	};
+};

arch/arm/mach-davinci/da8xx-dt.c

@@ -40,6 +40,7 @@ static void __init da8xx_init_irq(void)
 struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
 	OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL),
+	OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
 	{}
 };
 

drivers/mmc/host/davinci_mmc.c

@@ -34,6 +34,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/edma.h>
 #include <linux/mmc/mmc.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/platform_data/mmc-davinci.h>
 
@@ -522,14 +524,16 @@ static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host)
 	dma_cap_set(DMA_SLAVE, mask);
 
 	host->dma_tx =
-		dma_request_channel(mask, edma_filter_fn, &host->txdma);
+		dma_request_slave_channel_compat(mask, edma_filter_fn,
+				&host->txdma, mmc_dev(host->mmc), "tx");
 	if (!host->dma_tx) {
 		dev_err(mmc_dev(host->mmc), "Can't get dma_tx channel\n");
 		return -ENODEV;
 	}
 
 	host->dma_rx =
-		dma_request_channel(mask, edma_filter_fn, &host->rxdma);
+		dma_request_slave_channel_compat(mask, edma_filter_fn,
+				&host->rxdma, mmc_dev(host->mmc), "rx");
 	if (!host->dma_rx) {
 		dev_err(mmc_dev(host->mmc), "Can't get dma_rx channel\n");
 		r = -ENODEV;
@@ -1169,9 +1173,62 @@ static struct platform_device_id davinci_mmc_devtype[] = {
 };
 MODULE_DEVICE_TABLE(platform, davinci_mmc_devtype);
 
-static int __init davinci_mmcsd_probe(struct platform_device *pdev)
+static const struct of_device_id davinci_mmc_dt_ids[] = {
+	{
+		.compatible = "ti,dm6441-mmc",
+		.data = &davinci_mmc_devtype[MMC_CTLR_VERSION_1],
+	},
+	{
+		.compatible = "ti,da830-mmc",
+		.data = &davinci_mmc_devtype[MMC_CTLR_VERSION_2],
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, davinci_mmc_dt_ids);
+
+static struct davinci_mmc_config
+	*mmc_parse_pdata(struct platform_device *pdev)
 {
+	struct device_node *np;
 	struct davinci_mmc_config *pdata = pdev->dev.platform_data;
+	const struct of_device_id *match =
+		of_match_device(of_match_ptr(davinci_mmc_dt_ids), &pdev->dev);
+	u32 data;
+
+	np = pdev->dev.of_node;
+	if (!np)
+		return pdata;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Failed to allocate memory for struct davinci_mmc_config\n");
+		goto nodata;
+	}
+
+	if (match)
+		pdev->id_entry = match->data;
+
+	if (of_property_read_u32(np, "max-frequency", &pdata->max_freq))
+		dev_info(&pdev->dev, "'max-frequency' property not specified, defaulting to 25MHz\n");
+
+	of_property_read_u32(np, "bus-width", &data);
+	switch (data) {
+	case 1:
+	case 4:
+	case 8:
+		pdata->wires = data;
+		break;
+	default:
+		pdata->wires = 1;
+		dev_info(&pdev->dev, "Unsupported buswidth, defaulting to 1 bit\n");
+	}
+nodata:
+	return pdata;
+}
+
+static int __init davinci_mmcsd_probe(struct platform_device *pdev)
+{
+	struct davinci_mmc_config *pdata = NULL;
 	struct mmc_davinci_host *host = NULL;
 	struct mmc_host *mmc = NULL;
 	struct resource *r, *mem = NULL;
@@ -1179,7 +1236,11 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev)
 	size_t mem_size;
 	const struct platform_device_id *id_entry;
 
-	/* REVISIT:  when we're fully converted, fail if pdata is NULL */
+	pdata = mmc_parse_pdata(pdev);
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "Couldn't get platform data\n");
+		return -ENOENT;
+	}
 
 	ret = -ENODEV;
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1421,6 +1482,7 @@ static struct platform_driver davinci_mmcsd_driver = {
 		.name	= "davinci_mmc",
 		.owner	= THIS_MODULE,
 		.pm	= davinci_mmcsd_pm_ops,
+		.of_match_table = of_match_ptr(davinci_mmc_dt_ids),
 	},
 	.remove		= __exit_p(davinci_mmcsd_remove),
 	.id_table	= davinci_mmc_devtype,