beceem: remove ARP spoofing

Linux support NOARP flag, so the whole Arp spoofing routines
are not needed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>

drivers/staging/bcm/Arp.c

@@ -1,94 +0,0 @@
-
-/*
- * File Name: Arp.c
- * Abstract: This file contains the routines for handling ARP PACKETS
- */
-#include "headers.h"
-#define	ARP_PKT_SIZE	60
-
-/* =========================================================================
- * Function    - reply_to_arp_request()
- *
- * Description - When this host tries to broadcast ARP request packet through
- *		 		 the virtual interface (veth0), reply directly to upper layer.
- *		 		 This function allocates a new skb for ARP reply packet,
- *		 		 fills in the fields of the packet and then sends it to
- *		 		 upper layer.
- *
- * Parameters  - skb:	Pointer to sk_buff structure of the ARP request pkt.
- *
- * Returns     - None
- * =========================================================================*/
-
-VOID
-reply_to_arp_request(struct sk_buff *skb)
-{
-	PMINI_ADAPTER		Adapter;
-	struct ArpHeader 	*pArpHdr = NULL;
-	struct ethhdr		*pethhdr = NULL;
-	UCHAR 				uiIPHdr[4];
-	/* Check for valid skb */
-	if(skb == NULL)
-	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Invalid skb: Cannot reply to ARP request\n");
-		return;
-	}
-
-
-	Adapter = GET_BCM_ADAPTER(skb->dev);
-	/* Print the ARP Request Packet */
-	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, ARP_RESP, DBG_LVL_ALL, "ARP Packet Dump :");
-	BCM_DEBUG_PRINT_BUFFER(Adapter,DBG_TYPE_TX, ARP_RESP, DBG_LVL_ALL, (PUCHAR)(skb->data), skb->len);
-
-	/*
-	 * Extract the Ethernet Header and Arp Payload including Header
-     */
-	pethhdr = (struct ethhdr *)skb->data;
-	pArpHdr  = (struct ArpHeader *)(skb->data+ETH_HLEN);
-
-	if(Adapter->bETHCSEnabled)
-	{
-		if(memcmp(pethhdr->h_source, Adapter->dev->dev_addr, ETH_ALEN))
-		{
-			dev_kfree_skb(skb);
-			return;
-		}
-	}
-
-	// Set the Ethernet Header First.
-	memcpy(pethhdr->h_dest, pethhdr->h_source, ETH_ALEN);
-	if(!memcmp(pethhdr->h_source, Adapter->dev->dev_addr, ETH_ALEN))
-	{
-		pethhdr->h_source[5]++;
-	}
-
-	/* Set the reply to ARP Reply */
-	pArpHdr->arp.ar_op = ntohs(ARPOP_REPLY);
-
-	/* Set the HW Address properly */
-	memcpy(pArpHdr->ar_sha, pethhdr->h_source, ETH_ALEN);
-	memcpy(pArpHdr->ar_tha, pethhdr->h_dest, ETH_ALEN);
-
-	// Swapping the IP Adddress
-	memcpy(uiIPHdr,pArpHdr->ar_sip,4);
-	memcpy(pArpHdr->ar_sip,pArpHdr->ar_tip,4);
-	memcpy(pArpHdr->ar_tip,uiIPHdr,4);
-
-	/* Print the ARP Reply Packet */
-
-	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, ARP_RESP, DBG_LVL_ALL, "ARP REPLY PACKET: ");
-
-	/* Send the Packet to upper layer */
-	BCM_DEBUG_PRINT_BUFFER(Adapter,DBG_TYPE_TX, ARP_RESP, DBG_LVL_ALL, (PUCHAR)(skb->data), skb->len);
-
-	skb->protocol = eth_type_trans(skb,skb->dev);
-	skb->pkt_type = PACKET_HOST;
-
-//	skb->mac.raw=skb->data+LEADER_SIZE;
-	skb_set_mac_header (skb, LEADER_SIZE);
-	netif_rx(skb);
-	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, ARP_RESP, DBG_LVL_ALL, "<=============\n");
-	return;
-}
-
-

drivers/staging/bcm/Bcmnet.c

@@ -124,6 +124,9 @@ int register_networkdev(PMINI_ADAPTER Adapter)
 	net->ethtool_ops = &bcm_ethtool_ops;
 	net->mtu          = MTU_SIZE; /* 1400 Bytes */
 	net->tx_queue_len = TX_QLEN;
+	net->flags |= IFF_NOARP;
+	net->flags &= ~(IFF_BROADCAST|IFF_MULTICAST);
+
 	netif_carrier_off(net);
 
 	SET_NETDEV_DEVTYPE(net, &wimax_type);

drivers/staging/bcm/Makefile

@@ -6,7 +6,7 @@ obj-$(CONFIG_BCM_WIMAX) +=	bcm_wimax.o
 
 bcm_wimax-y :=  InterfaceDld.o InterfaceIdleMode.o InterfaceInit.o InterfaceRx.o \
 		InterfaceIsr.o InterfaceMisc.o InterfaceTx.o \
-		Arp.o CmHost.o IPv6Protocol.o Qos.o Transmit.o\
+		CmHost.o IPv6Protocol.o Qos.o Transmit.o\
 		Bcmnet.o DDRInit.o HandleControlPacket.o\
 		LeakyBucket.o Misc.o sort.o Bcmchar.o hostmibs.o PHSModule.o\
 		led_control.o nvm.o vendorspecificextn.o

drivers/staging/bcm/Transmit.c

@@ -6,7 +6,7 @@
 digraph transmit1 {
 node[shape=box]
 edge[weight=5;color=red]
-bcm_transmit->reply_to_arp_request[label="ARP"]
+
 bcm_transmit->GetPacketQueueIndex[label="IP Packet"]
 GetPacketQueueIndex->IpVersion4[label="IPV4"]
 GetPacketQueueIndex->IpVersion6[label="IPV6"]
@@ -63,17 +63,8 @@ netdev_tx_t bcm_transmit(struct sk_buff *skb, struct net_device *dev)
 
 	qindex = GetPacketQueueIndex(Adapter, skb);
 
-	if (INVALID_QUEUE_INDEX==qindex)	{
-		if (ntohs(eth_hdr(skb)->h_proto) != ETH_ARP_FRAME)
-			goto drop;
-
-		/*
-		  Reply directly to ARP request packet
-		  ARP Spoofing only if NO ETH CS rule matches for it
-		*/
-		reply_to_arp_request(skb);
-		return NETDEV_TX_OK;
-	}
+	if (INVALID_QUEUE_INDEX==qindex)
+		goto drop;
 
 	if (Adapter->PackInfo[qindex].uiCurrentPacketsOnHost >= SF_MAX_ALLOWED_PACKETS_TO_BACKUP)
 		return NETDEV_TX_BUSY;