Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...

Documentation/devices.txt

@@ -239,6 +239,7 @@ Your cooperation is appreciated.
 		  0 = /dev/tty		Current TTY device
 		  1 = /dev/console	System console
 		  2 = /dev/ptmx		PTY master multiplex
+		  3 = /dev/ttyprintk	User messages via printk TTY device
 		 64 = /dev/cua0		Callout device for ttyS0
 		    ...
 		255 = /dev/cua191	Callout device for ttyS191

Documentation/filesystems/proc.txt

@@ -1075,6 +1075,7 @@ Table 1-11: Files in /proc/tty
  drivers       list of drivers and their usage                
  ldiscs        registered line disciplines                    
  driver/serial usage statistic and status of single tty lines 
+ consoles      registered system console lines
 ..............................................................................
 
 To see  which  tty's  are  currently in use, you can simply look into the file
@@ -1093,6 +1094,37 @@ To see  which  tty's  are  currently in use, you can simply look into the file
   /dev/tty             /dev/tty        5       0 system:/dev/tty 
   unknown              /dev/tty        4    1-63 console 
 
+To see which character device lines are currently used for the system console
+/dev/console, you may simply look into the file /proc/tty/consoles:
+
+  > cat /proc/tty/consoles
+  tty0                 -WU (ECp)       4:7
+  ttyS0                -W- (Ep)        4:64
+
+The columns are:
+
+  device               name of the device
+  operations           R = can do read operations
+                       W = can do write operations
+                       U = can do unblank
+  flags                E = it is enabled
+                       C = it is prefered console
+                       B = it is primary boot console
+                       p = it is used for printk buffer
+                       b = it is not a TTY but a Braille device
+                       a = it is safe to use when cpu is offline
+                       * = it is standard input of the reading process
+  major:minor          major and minor number of the device separated by a colon
+
+If the reading process holds /dev/console open at the regular standard input
+stream the active device will be marked by an asterisk:
+
+  > cat /proc/tty/consoles < /dev/console
+  tty0                 -WU (ECp*)      4:7
+  ttyS0                -W- (Ep)        4:64
+  > tty
+  /dev/pts/3
+
 
 1.8 Miscellaneous kernel statistics in /proc/stat
 -------------------------------------------------

MAINTAINERS

@@ -157,9 +157,11 @@ S:	Maintained
 F:	drivers/net/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-S:	Orphan
+S:	Maintained
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
@@ -3353,6 +3355,12 @@ F:	fs/jbd*/
 F:	include/linux/ext*jbd*.h
 F:	include/linux/jbd*.h
 
+JSM Neo PCI based serial card
+M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+L:	linux-serial@vger.kernel.org
+S:	Maintained
+F:	drivers/serial/jsm/
+
 K8TEMP HARDWARE MONITORING DRIVER
 M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org

arch/arm/include/asm/ioctls.h

@@ -1,89 +1,8 @@
 #ifndef __ASM_ARM_IOCTLS_H
 #define __ASM_ARM_IOCTLS_H
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
-
-#define TIOCGRS485      0x542E
-#define TIOCSRS485      0x542F
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
 #define FIOQSIZE	0x545E
 
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-#define TIOCPKT_IOCTL		64
-
-#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif

arch/avr32/include/asm/ioctls.h

@@ -1,90 +1,6 @@
 #ifndef __ASM_AVR32_IOCTLS_H
 #define __ASM_AVR32_IOCTLS_H
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
-
-#define TIOCGRS485      0x542E
-#define TIOCSRS485      0x542F
-
-#define FIONCLEX	0x5450
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define FIOQSIZE	0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-#define TIOCPKT_IOCTL		64
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif /* __ASM_AVR32_IOCTLS_H */

arch/cris/include/asm/ioctls.h

@@ -1,93 +1,11 @@
 #ifndef __ARCH_CRIS_IOCTLS_H__
 #define __ARCH_CRIS_IOCTLS_H__
 
-/* verbatim copy of asm-i386/ioctls.h */
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
 #define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define FIOQSIZE	0x5460
-
 #define TIOCSERSETRS485	0x5461  /* enable rs-485 (deprecated) */
 #define TIOCSERWRRS485	0x5462  /* write rs-485 */
 #define TIOCSRS485	0x5463  /* enable rs-485 */
-#define TIOCGRS485	0x542E  /* get rs-485 */
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-#define TIOCPKT_IOCTL		64
 
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif

arch/frv/include/asm/ioctls.h

@@ -1,88 +1,10 @@
 #ifndef __ASM_IOCTLS_H__
 #define __ASM_IOCTLS_H__
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
 #define TIOCTTYGSTRUCT	0x5426  /* For debugging only */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
 #define FIOQSIZE	0x545E
 
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-#define TIOCPKT_IOCTL		64
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif /* __ASM_IOCTLS_H__ */
 

arch/h8300/include/asm/ioctls.h

@@ -1,87 +1,8 @@
 #ifndef __ARCH_H8300_IOCTLS_H__
 #define __ARCH_H8300_IOCTLS_H__
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT	0x5426  /* For debugging only */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
 #define FIOQSIZE	0x545E
 
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-#define TIOCPKT_IOCTL		64
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif /* __ARCH_H8300_IOCTLS_H__ */

arch/ia64/hp/sim/simserial.c

@@ -395,7 +395,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 {
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
 	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -433,16 +433,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		case TIOCMIWAIT:
 			printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
 			return 0;
-		/*
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
-			return 0;
-
 		case TIOCSERGWILD:
 		case TIOCSERSWILD:
 			/* "setserial -W" is called in Debian boot */

arch/ia64/include/asm/ioctls.h

@@ -1,93 +1,6 @@
 #ifndef _ASM_IA64_IOCTLS_H
 #define _ASM_IA64_IOCTLS_H
 
-/*
- * Based on <asm-i386/ioctls.h>
- *
- * Modified 1998, 1999, 2002
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402	/* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define FIOQSIZE	0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-#define TIOCPKT_IOCTL		64
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif /* _ASM_IA64_IOCTLS_H */

arch/m32r/include/asm/ioctls.h

@@ -1,87 +1,6 @@
 #ifndef __ARCH_M32R_IOCTLS_H__
 #define __ARCH_M32R_IOCTLS_H__
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
-
-#define FIONCLEX	0x5450
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define FIOQSIZE	0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-#define TIOCPKT_IOCTL		64
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif /* __ARCH_M32R_IOCTLS_H__ */

arch/mips/alchemy/common/platform.c

@@ -24,6 +24,33 @@
 
 #include <prom.h>
 
+static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
+			    unsigned int old_state)
+{
+	switch (state) {
+	case 0:
+		if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
+			/* power-on sequence as suggested in the databooks */
+			__raw_writel(0, port->membase + UART_MOD_CNTRL);
+			wmb();
+			__raw_writel(1, port->membase + UART_MOD_CNTRL);
+			wmb();
+		}
+		__raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */
+		wmb();
+		serial8250_do_pm(port, state, old_state);
+		break;
+	case 3:		/* power off */
+		serial8250_do_pm(port, state, old_state);
+		__raw_writel(0, port->membase + UART_MOD_CNTRL);
+		wmb();
+		break;
+	default:
+		serial8250_do_pm(port, state, old_state);
+		break;
+	}
+}
+
 #define PORT(_base, _irq)					\
 	{							\
 		.mapbase	= _base,			\
@@ -33,6 +60,7 @@
 		.flags		= UPF_SKIP_TEST | UPF_IOREMAP |	\
 				  UPF_FIXED_TYPE,		\
 		.type		= PORT_16550A,			\
+		.pm		= alchemy_8250_pm,		\
 	}
 
 static struct plat_serial8250_port au1x00_uart_data[] = {

arch/mips/alchemy/common/power.c

@@ -49,11 +49,6 @@
  * We only have to save/restore registers that aren't otherwise
  * done as part of a driver pm_* function.
  */
-static unsigned int sleep_uart0_inten;
-static unsigned int sleep_uart0_fifoctl;
-static unsigned int sleep_uart0_linectl;
-static unsigned int sleep_uart0_clkdiv;
-static unsigned int sleep_uart0_enable;
 static unsigned int sleep_usb[2];
 static unsigned int sleep_sys_clocks[5];
 static unsigned int sleep_sys_pinfunc;
@@ -62,22 +57,6 @@ static unsigned int sleep_static_memctlr[4][3];
 
 static void save_core_regs(void)
 {
-	extern void save_au1xxx_intctl(void);
-	extern void pm_eth0_shutdown(void);
-
-	/*
-	 * Do the serial ports.....these really should be a pm_*
-	 * registered function by the driver......but of course the
-	 * standard serial driver doesn't understand our Au1xxx
-	 * unique registers.
-	 */
-	sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER);
-	sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR);
-	sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
-	sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
-	sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
-	au_sync();
-
 #ifndef CONFIG_SOC_AU1200
 	/* Shutdown USB host/device. */
 	sleep_usb[0] = au_readl(USB_HOST_CONFIG);
@@ -175,20 +154,6 @@ static void restore_core_regs(void)
 	au_writel(sleep_static_memctlr[3][0], MEM_STCFG3);
 	au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
 	au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
-
-	/*
-	 * Enable the UART if it was enabled before sleep.
-	 * I guess I should define module control bits........
-	 */
-	if (sleep_uart0_enable & 0x02) {
-		au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync();
-		au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync();
-		au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync();
-		au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync();
-		au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync();
-		au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
-		au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
-	}
 }
 
 void au_sleep(void)

arch/mn10300/include/asm/ioctls.h

@@ -1,88 +1,6 @@
 #ifndef _ASM_IOCTLS_H
 #define _ASM_IOCTLS_H
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T', 0x2A, struct termios2)
-#define TCSETS2		_IOW('T', 0x2B, struct termios2)
-#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
-#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number
-						       * (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
-#define TIOCSIG		_IOW('T', 0x36, int)  /* Generate signal on Pty slave */
-
-#define FIONCLEX	0x5450
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define FIOQSIZE	0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-#define TIOCPKT_IOCTL		64
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif /* _ASM_IOCTLS_H */

arch/s390/include/asm/ioctls.h

@@ -1,94 +1,8 @@
-/*
- *  include/asm-s390/ioctls.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/ioctls.h"
- */
-
 #ifndef __ARCH_S390_IOCTLS_H__
 #define __ARCH_S390_IOCTLS_H__
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
 #define FIOQSIZE	0x545E
 
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-#define TIOCPKT_IOCTL		64
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif

drivers/char/Kconfig

@@ -493,6 +493,21 @@ config LEGACY_PTY_COUNT
 	  When not in use, each legacy PTY occupies 12 bytes on 32-bit
 	  architectures and 24 bytes on 64-bit architectures.
 
+config TTY_PRINTK
+	bool "TTY driver to output user messages via printk"
+	depends on EMBEDDED
+	default n
+	---help---
+	  If you say Y here, the support for writing user messages (i.e.
+	  console messages) via printk is available.
+
+	  The feature is useful to inline user messages with kernel
+	  messages.
+	  In order to use this feature, you should output user messages
+	  to /dev/ttyprintk or redirect console to this TTY.
+
+	  If unsure, say N.
+
 config BRIQ_PANEL
 	tristate 'Total Impact briQ front panel driver'
 	depends on PPC_CHRP

drivers/char/Makefile

@@ -12,6 +12,7 @@ obj-y	 += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o t
 obj-y				+= tty_mutex.o
 obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
 obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
+obj-$(CONFIG_TTY_PRINTK)	+= ttyprintk.o
 obj-y				+= misc.o
 obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o selection.o keyboard.o
 obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o

drivers/char/amiserial.c

@@ -1263,6 +1263,36 @@ static int rs_break(struct tty_struct *tty, int break_state)
 	return 0;
 }
 
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int rs_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct async_struct *info = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cnow = info->state->icount;
+	local_irq_restore(flags);
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
 
 static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
@@ -1332,31 +1362,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 			}
 			/* NOTREACHED */
 
-		/* 
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			local_irq_save(flags);
-			cnow = info->state->icount;
-			local_irq_restore(flags);
-			icount.cts = cnow.cts;
-			icount.dsr = cnow.dsr;
-			icount.rng = cnow.rng;
-			icount.dcd = cnow.dcd;
-			icount.rx = cnow.rx;
-			icount.tx = cnow.tx;
-			icount.frame = cnow.frame;
-			icount.overrun = cnow.overrun;
-			icount.parity = cnow.parity;
-			icount.brk = cnow.brk;
-			icount.buf_overrun = cnow.buf_overrun;
-
-			if (copy_to_user(argp, &icount, sizeof(icount)))
-				return -EFAULT;
-			return 0;
 		case TIOCSERGWILD:
 		case TIOCSERSWILD:
 			/* "setserial -W" is called in Debian boot */
@@ -1958,6 +1963,7 @@ static const struct tty_operations serial_ops = {
 	.wait_until_sent = rs_wait_until_sent,
 	.tiocmget = rs_tiocmget,
 	.tiocmset = rs_tiocmset,
+	.get_icount = rs_get_icount,
 	.proc_fops = &rs_proc_fops,
 };
 

drivers/char/cyclades.c

@@ -2790,29 +2790,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		 * NB: both 1->0 and 0->1 transitions are counted except for
 		 *     RI where only 0->1 is counted.
 		 */
-	case TIOCGICOUNT: {
-		struct serial_icounter_struct sic = { };
-
-		spin_lock_irqsave(&info->card->card_lock, flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->card->card_lock, flags);
-
-		sic.cts = cnow.cts;
-		sic.dsr = cnow.dsr;
-		sic.rng = cnow.rng;
-		sic.dcd = cnow.dcd;
-		sic.rx = cnow.rx;
-		sic.tx = cnow.tx;
-		sic.frame = cnow.frame;
-		sic.overrun = cnow.overrun;
-		sic.parity = cnow.parity;
-		sic.brk = cnow.brk;
-		sic.buf_overrun = cnow.buf_overrun;
-
-		if (copy_to_user(argp, &sic, sizeof(sic)))
-			ret_val = -EFAULT;
-		break;
-	}
 	default:
 		ret_val = -ENOIOCTLCMD;
 	}
@@ -2823,6 +2800,31 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 	return ret_val;
 }				/* cy_ioctl */
 
+static int cy_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *sic)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_icount cnow;	/* Used to snapshot */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->card->card_lock, flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+	sic->cts = cnow.cts;
+	sic->dsr = cnow.dsr;
+	sic->rng = cnow.rng;
+	sic->dcd = cnow.dcd;
+	sic->rx = cnow.rx;
+	sic->tx = cnow.tx;
+	sic->frame = cnow.frame;
+	sic->overrun = cnow.overrun;
+	sic->parity = cnow.parity;
+	sic->brk = cnow.brk;
+	sic->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
 /*
  * This routine allows the tty driver to be notified when
  * device's termios settings have changed.  Note that a
@@ -4084,6 +4086,7 @@ static const struct tty_operations cy_ops = {
 	.wait_until_sent = cy_wait_until_sent,
 	.tiocmget = cy_tiocmget,
 	.tiocmset = cy_tiocmset,
+	.get_icount = cy_get_icount,
 	.proc_fops = &cyclades_proc_fops,
 };
 

drivers/char/ip2/ip2main.c

@@ -184,6 +184,8 @@ static void ip2_hangup(PTTY);
 static int  ip2_tiocmget(struct tty_struct *tty, struct file *file);
 static int  ip2_tiocmset(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
+static int ip2_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount);
 
 static void set_irq(int, int);
 static void ip2_interrupt_bh(struct work_struct *work);
@@ -456,6 +458,7 @@ static const struct tty_operations ip2_ops = {
 	.hangup          = ip2_hangup,
 	.tiocmget	 = ip2_tiocmget,
 	.tiocmset	 = ip2_tiocmset,
+	.get_icount	 = ip2_get_icount,
 	.proc_fops	 = &ip2_proc_fops,
 };
 
@@ -2130,7 +2133,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
 	i2ChanStrPtr pCh = DevTable[tty->index];
 	i2eBordStrPtr pB;
 	struct async_icount cprev, cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;
 	int rc = 0;
 	unsigned long flags;
 	void __user *argp = (void __user *)arg;
@@ -2298,34 +2300,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
 		return rc;
 		break;
 
-	/*
-	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-	 * Return: write counters to the user passed counter struct
-	 * NB: both 1->0 and 0->1 transitions are counted except for RI where
-	 * only 0->1 is counted. The controller is quite capable of counting
-	 * both, but this done to preserve compatibility with the standard
-	 * serial driver.
-	 */
-	case TIOCGICOUNT:
-		ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
-
-		write_lock_irqsave(&pB->read_fifo_spinlock, flags);
-		cnow = pCh->icount;
-		write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
-		p_cuser = argp;
-		rc = put_user(cnow.cts, &p_cuser->cts);
-		rc = put_user(cnow.dsr, &p_cuser->dsr);
-		rc = put_user(cnow.rng, &p_cuser->rng);
-		rc = put_user(cnow.dcd, &p_cuser->dcd);
-		rc = put_user(cnow.rx, &p_cuser->rx);
-		rc = put_user(cnow.tx, &p_cuser->tx);
-		rc = put_user(cnow.frame, &p_cuser->frame);
-		rc = put_user(cnow.overrun, &p_cuser->overrun);
-		rc = put_user(cnow.parity, &p_cuser->parity);
-		rc = put_user(cnow.brk, &p_cuser->brk);
-		rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
-		break;
-
 	/*
 	 * The rest are not supported by this driver. By returning -ENOIOCTLCMD they
 	 * will be passed to the line discipline for it to handle.
@@ -2350,6 +2324,46 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
 	return rc;
 }
 
+static int ip2_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount)
+{
+	i2ChanStrPtr pCh = DevTable[tty->index];
+	i2eBordStrPtr pB;
+	struct async_icount cnow;	/* kernel counter temp */
+	unsigned long flags;
+
+	if ( pCh == NULL )
+		return -ENODEV;
+
+	pB = pCh->pMyBord;
+
+	/*
+	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+	 * Return: write counters to the user passed counter struct
+	 * NB: both 1->0 and 0->1 transitions are counted except for RI where
+	 * only 0->1 is counted. The controller is quite capable of counting
+	 * both, but this done to preserve compatibility with the standard
+	 * serial driver.
+	 */
+
+	write_lock_irqsave(&pB->read_fifo_spinlock, flags);
+	cnow = pCh->icount;
+	write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
 /******************************************************************************/
 /* Function:   GetSerialInfo()                                                */
 /* Parameters: Pointer to channel structure                                   */

drivers/char/mxser.c

@@ -1700,7 +1700,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 		return 0;
 	}
 
-	if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
+	if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT &&
 			test_bit(TTY_IO_ERROR, &tty->flags))
 		return -EIO;
 
@@ -1730,32 +1730,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 
 		return wait_event_interruptible(info->port.delta_msr_wait,
 				mxser_cflags_changed(info, arg, &cnow));
-	/*
-	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-	 * Return: write counters to the user passed counter struct
-	 * NB: both 1->0 and 0->1 transitions are counted except for
-	 *     RI where only 0->1 is counted.
-	 */
-	case TIOCGICOUNT: {
-		struct serial_icounter_struct icnt = { 0 };
-		spin_lock_irqsave(&info->slock, flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->slock, flags);
-
-		icnt.frame = cnow.frame;
-		icnt.brk = cnow.brk;
-		icnt.overrun = cnow.overrun;
-		icnt.buf_overrun = cnow.buf_overrun;
-		icnt.parity = cnow.parity;
-		icnt.rx = cnow.rx;
-		icnt.tx = cnow.tx;
-		icnt.cts = cnow.cts;
-		icnt.dsr = cnow.dsr;
-		icnt.rng = cnow.rng;
-		icnt.dcd = cnow.dcd;
-
-		return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
-	}
 	case MOXA_HighSpeedOn:
 		return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
 	case MOXA_SDS_RSTICOUNTER:
@@ -1828,6 +1802,39 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
+	/*
+	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+	 * Return: write counters to the user passed counter struct
+	 * NB: both 1->0 and 0->1 transitions are counted except for
+	 *     RI where only 0->1 is counted.
+	 */
+
+static int mxser_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount)
+
+{
+	struct mxser_port *info = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->slock, flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	icount->frame = cnow.frame;
+	icount->brk = cnow.brk;
+	icount->overrun = cnow.overrun;
+	icount->buf_overrun = cnow.buf_overrun;
+	icount->parity = cnow.parity;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	return 0;
+}
+
 static void mxser_stoprx(struct tty_struct *tty)
 {
 	struct mxser_port *info = tty->driver_data;
@@ -2326,6 +2333,7 @@ static const struct tty_operations mxser_ops = {
 	.wait_until_sent = mxser_wait_until_sent,
 	.tiocmget = mxser_tiocmget,
 	.tiocmset = mxser_tiocmset,
+	.get_icount = mxser_get_icount,
 };
 
 struct tty_port_operations mxser_port_ops = {
@@ -2339,20 +2347,11 @@ struct tty_port_operations mxser_port_ops = {
  * The MOXA Smartio/Industio serial driver boot-time initialization code!
  */
 
-static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
-		unsigned int irq)
+static void mxser_release_ISA_res(struct mxser_board *brd)
 {
-	if (irq)
-		free_irq(brd->irq, brd);
-	if (pdev != NULL) {	/* PCI */
-#ifdef CONFIG_PCI
-		pci_release_region(pdev, 2);
-		pci_release_region(pdev, 3);
-#endif
-	} else {
-		release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
-		release_region(brd->vector, 1);
-	}
+	free_irq(brd->irq, brd);
+	release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+	release_region(brd->vector, 1);
 }
 
 static int __devinit mxser_initbrd(struct mxser_board *brd,
@@ -2397,13 +2396,11 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 
 	retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
 			brd);
-	if (retval) {
+	if (retval)
 		printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
 			"conflict with another device.\n",
 			brd->info->name, brd->irq);
-		/* We hold resources, we need to release them. */
-		mxser_release_res(brd, pdev, 0);
-	}
+
 	return retval;
 }
 
@@ -2555,7 +2552,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
 	ioaddress = pci_resource_start(pdev, 2);
 	retval = pci_request_region(pdev, 2, "mxser(IO)");
 	if (retval)
-		goto err;
+		goto err_dis;
 
 	brd->info = &mxser_cards[ent->driver_data];
 	for (i = 0; i < brd->info->nports; i++)
@@ -2565,7 +2562,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
 	ioaddress = pci_resource_start(pdev, 3);
 	retval = pci_request_region(pdev, 3, "mxser(vector)");
 	if (retval)
-		goto err_relio;
+		goto err_zero;
 	brd->vector = ioaddress;
 
 	/* irq */
@@ -2608,7 +2605,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
 	/* mxser_initbrd will hook ISR. */
 	retval = mxser_initbrd(brd, pdev);
 	if (retval)
-		goto err_null;
+		goto err_rel3;
 
 	for (i = 0; i < brd->info->nports; i++)
 		tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
@@ -2616,10 +2613,13 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
 	pci_set_drvdata(pdev, brd);
 
 	return 0;
-err_relio:
-	pci_release_region(pdev, 2);
-err_null:
+err_rel3:
+	pci_release_region(pdev, 3);
+err_zero:
 	brd->info = NULL;
+	pci_release_region(pdev, 2);
+err_dis:
+	pci_disable_device(pdev);
 err:
 	return retval;
 #else
@@ -2629,14 +2629,19 @@ err:
 
 static void __devexit mxser_remove(struct pci_dev *pdev)
 {
+#ifdef CONFIG_PCI
 	struct mxser_board *brd = pci_get_drvdata(pdev);
 	unsigned int i;
 
 	for (i = 0; i < brd->info->nports; i++)
 		tty_unregister_device(mxvar_sdriver, brd->idx + i);
 
-	mxser_release_res(brd, pdev, 1);
+	free_irq(pdev->irq, brd);
+	pci_release_region(pdev, 2);
+	pci_release_region(pdev, 3);
+	pci_disable_device(pdev);
 	brd->info = NULL;
+#endif
 }
 
 static struct pci_driver mxser_driver = {
@@ -2741,7 +2746,7 @@ static void __exit mxser_module_exit(void)
 
 	for (i = 0; i < MXSER_BOARDS; i++)
 		if (mxser_boards[i].info != NULL)
-			mxser_release_res(&mxser_boards[i], NULL, 1);
+			mxser_release_ISA_res(&mxser_boards[i]);
 }
 
 module_init(mxser_module_init);

drivers/char/nozomi.c

@@ -1804,24 +1804,24 @@ static int ntty_cflags_changed(struct port *port, unsigned long flags,
 	return ret;
 }
 
-static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp)
+static int ntty_tiocgicount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
 {
+	struct port *port = tty->driver_data;
 	const struct async_icount cnow = port->tty_icount;
-	struct serial_icounter_struct icount;
-
-	icount.cts = cnow.cts;
-	icount.dsr = cnow.dsr;
-	icount.rng = cnow.rng;
-	icount.dcd = cnow.dcd;
-	icount.rx = cnow.rx;
-	icount.tx = cnow.tx;
-	icount.frame = cnow.frame;
-	icount.overrun = cnow.overrun;
-	icount.parity = cnow.parity;
-	icount.brk = cnow.brk;
-	icount.buf_overrun = cnow.buf_overrun;
-
-	return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0;
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
 }
 
 static int ntty_ioctl(struct tty_struct *tty, struct file *file,
@@ -1840,9 +1840,7 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file,
 		rval = wait_event_interruptible(port->tty_wait,
 				ntty_cflags_changed(port, arg, &cprev));
 		break;
-	} case TIOCGICOUNT:
-		rval = ntty_ioctl_tiocgicount(port, argp);
-		break;
+	}
 	default:
 		DBG1("ERR: 0x%08X, %d", cmd, cmd);
 		break;
@@ -1922,6 +1920,7 @@ static const struct tty_operations tty_ops = {
 	.chars_in_buffer = ntty_chars_in_buffer,
 	.tiocmget = ntty_tiocmget,
 	.tiocmset = ntty_tiocmset,
+	.get_icount = ntty_tiocgicount,
 	.install = ntty_install,
 	.cleanup = ntty_cleanup,
 };

drivers/char/pcmcia/synclink_cs.c

@@ -2191,6 +2191,32 @@ static int mgslpc_break(struct tty_struct *tty, int break_state)
 	return 0;
 }
 
+static int mgslpc_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
 /* Service an IOCTL request
  *
  * Arguments:
@@ -2206,11 +2232,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
 			unsigned int cmd, unsigned long arg)
 {
 	MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
-	int error;
-	struct mgsl_icount cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
 	void __user *argp = (void __user *)arg;
-	unsigned long flags;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
@@ -2220,7 +2242,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
 		return -ENODEV;
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -2250,34 +2272,6 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
 		return wait_events(info, argp);
 	case TIOCMIWAIT:
 		return modem_input_wait(info,(int)arg);
-	case TIOCGICOUNT:
-		spin_lock_irqsave(&info->lock,flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->lock,flags);
-		p_cuser = argp;
-		PUT_USER(error,cnow.cts, &p_cuser->cts);
-		if (error) return error;
-		PUT_USER(error,cnow.dsr, &p_cuser->dsr);
-		if (error) return error;
-		PUT_USER(error,cnow.rng, &p_cuser->rng);
-		if (error) return error;
-		PUT_USER(error,cnow.dcd, &p_cuser->dcd);
-		if (error) return error;
-		PUT_USER(error,cnow.rx, &p_cuser->rx);
-		if (error) return error;
-		PUT_USER(error,cnow.tx, &p_cuser->tx);
-		if (error) return error;
-		PUT_USER(error,cnow.frame, &p_cuser->frame);
-		if (error) return error;
-		PUT_USER(error,cnow.overrun, &p_cuser->overrun);
-		if (error) return error;
-		PUT_USER(error,cnow.parity, &p_cuser->parity);
-		if (error) return error;
-		PUT_USER(error,cnow.brk, &p_cuser->brk);
-		if (error) return error;
-		PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
-		if (error) return error;
-		return 0;
 	default:
 		return -ENOIOCTLCMD;
 	}

drivers/char/pty.c

@@ -676,7 +676,9 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 
 	set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
 
-	tty_add_file(tty, filp);
+	retval = tty_add_file(tty, filp);
+	if (retval)
+		goto out;
 
 	retval = devpts_pty_new(inode, tty->link);
 	if (retval)

drivers/char/synclink.c

@@ -2925,6 +2925,38 @@ static int mgsl_break(struct tty_struct *tty, int break_state)
 	
 }	/* end of mgsl_break() */
 
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int msgl_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+
+{
+	struct mgsl_struct * info = tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
 /* mgsl_ioctl()	Service an IOCTL request
  * 	
  * Arguments:
@@ -2949,7 +2981,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
 		return -ENODEV;
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -2959,11 +2991,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
 
 static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
 {
-	int error;
-	struct mgsl_icount cnow;	/* kernel counter temps */
 	void __user *argp = (void __user *)arg;
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
-	unsigned long flags;
 	
 	switch (cmd) {
 		case MGSL_IOCGPARAMS:
@@ -2992,40 +3020,6 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne
 		case TIOCMIWAIT:
 			return modem_input_wait(info,(int)arg);
 
-		/* 
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			spin_lock_irqsave(&info->irq_spinlock,flags);
-			cnow = info->icount;
-			spin_unlock_irqrestore(&info->irq_spinlock,flags);
-			p_cuser = argp;
-			PUT_USER(error,cnow.cts, &p_cuser->cts);
-			if (error) return error;
-			PUT_USER(error,cnow.dsr, &p_cuser->dsr);
-			if (error) return error;
-			PUT_USER(error,cnow.rng, &p_cuser->rng);
-			if (error) return error;
-			PUT_USER(error,cnow.dcd, &p_cuser->dcd);
-			if (error) return error;
-			PUT_USER(error,cnow.rx, &p_cuser->rx);
-			if (error) return error;
-			PUT_USER(error,cnow.tx, &p_cuser->tx);
-			if (error) return error;
-			PUT_USER(error,cnow.frame, &p_cuser->frame);
-			if (error) return error;
-			PUT_USER(error,cnow.overrun, &p_cuser->overrun);
-			if (error) return error;
-			PUT_USER(error,cnow.parity, &p_cuser->parity);
-			if (error) return error;
-			PUT_USER(error,cnow.brk, &p_cuser->brk);
-			if (error) return error;
-			PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
-			if (error) return error;
-			return 0;
 		default:
 			return -ENOIOCTLCMD;
 	}
@@ -4328,6 +4322,7 @@ static const struct tty_operations mgsl_ops = {
 	.hangup = mgsl_hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = msgl_get_icount,
 	.proc_fops = &mgsl_proc_fops,
 };
 

drivers/char/synclink_gt.c

@@ -1032,9 +1032,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 		 unsigned int cmd, unsigned long arg)
 {
 	struct slgt_info *info = tty->driver_data;
-	struct mgsl_icount cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
-	unsigned long flags;
 	void __user *argp = (void __user *)arg;
 	int ret;
 
@@ -1043,7 +1040,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 	DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -1053,24 +1050,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 		return wait_mgsl_event(info, argp);
 	case TIOCMIWAIT:
 		return modem_input_wait(info,(int)arg);
-	case TIOCGICOUNT:
-		spin_lock_irqsave(&info->lock,flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->lock,flags);
-		p_cuser = argp;
-		if (put_user(cnow.cts, &p_cuser->cts) ||
-		    put_user(cnow.dsr, &p_cuser->dsr) ||
-		    put_user(cnow.rng, &p_cuser->rng) ||
-		    put_user(cnow.dcd, &p_cuser->dcd) ||
-		    put_user(cnow.rx, &p_cuser->rx) ||
-		    put_user(cnow.tx, &p_cuser->tx) ||
-		    put_user(cnow.frame, &p_cuser->frame) ||
-		    put_user(cnow.overrun, &p_cuser->overrun) ||
-		    put_user(cnow.parity, &p_cuser->parity) ||
-		    put_user(cnow.brk, &p_cuser->brk) ||
-		    put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
-			return -EFAULT;
-		return 0;
 	case MGSL_IOCSGPIO:
 		return set_gpio(info, argp);
 	case MGSL_IOCGGPIO:
@@ -1117,6 +1096,33 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 	return ret;
 }
 
+static int get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+
+{
+	struct slgt_info *info = tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
 /*
  * support for 32 bit ioctl calls on 64 bit systems
  */
@@ -1206,10 +1212,6 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
 	case MGSL_IOCSGPIO:
 	case MGSL_IOCGGPIO:
 	case MGSL_IOCWAITGPIO:
-	case TIOCGICOUNT:
-		rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
-		break;
-
 	case MGSL_IOCSTXIDLE:
 	case MGSL_IOCTXENABLE:
 	case MGSL_IOCRXENABLE:
@@ -3642,6 +3644,7 @@ static const struct tty_operations ops = {
 	.hangup = hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = get_icount,
 	.proc_fops = &synclink_gt_proc_fops,
 };
 

drivers/char/synclinkmp.c

@@ -1258,10 +1258,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 		 unsigned int cmd, unsigned long arg)
 {
 	SLMP_INFO *info = tty->driver_data;
-	int error;
-	struct mgsl_icount cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
-	unsigned long flags;
 	void __user *argp = (void __user *)arg;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
@@ -1272,7 +1268,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 		return -ENODEV;
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -1310,40 +1306,38 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 		 * NB: both 1->0 and 0->1 transitions are counted except for
 		 *     RI where only 0->1 is counted.
 		 */
-	case TIOCGICOUNT:
-		spin_lock_irqsave(&info->lock,flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->lock,flags);
-		p_cuser = argp;
-		PUT_USER(error,cnow.cts, &p_cuser->cts);
-		if (error) return error;
-		PUT_USER(error,cnow.dsr, &p_cuser->dsr);
-		if (error) return error;
-		PUT_USER(error,cnow.rng, &p_cuser->rng);
-		if (error) return error;
-		PUT_USER(error,cnow.dcd, &p_cuser->dcd);
-		if (error) return error;
-		PUT_USER(error,cnow.rx, &p_cuser->rx);
-		if (error) return error;
-		PUT_USER(error,cnow.tx, &p_cuser->tx);
-		if (error) return error;
-		PUT_USER(error,cnow.frame, &p_cuser->frame);
-		if (error) return error;
-		PUT_USER(error,cnow.overrun, &p_cuser->overrun);
-		if (error) return error;
-		PUT_USER(error,cnow.parity, &p_cuser->parity);
-		if (error) return error;
-		PUT_USER(error,cnow.brk, &p_cuser->brk);
-		if (error) return error;
-		PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
-		if (error) return error;
-		return 0;
 	default:
 		return -ENOIOCTLCMD;
 	}
 	return 0;
 }
 
+static int get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	SLMP_INFO *info = tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
 /*
  * /proc fs routines....
  */
@@ -3909,6 +3903,7 @@ static const struct tty_operations ops = {
 	.hangup = hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = get_icount,
 	.proc_fops = &synclinkmp_proc_fops,
 };
 

drivers/char/tty_io.c

@@ -96,6 +96,7 @@
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
+#include <linux/serial.h>
 
 #include <linux/uaccess.h>
 #include <asm/system.h>
@@ -183,6 +184,8 @@ struct tty_struct *alloc_tty_struct(void)
 
 void free_tty_struct(struct tty_struct *tty)
 {
+	if (tty->dev)
+		put_device(tty->dev);
 	kfree(tty->write_buf);
 	tty_buffer_free_all(tty);
 	kfree(tty);
@@ -194,12 +197,13 @@ static inline struct tty_struct *file_tty(struct file *file)
 }
 
 /* Associate a new file with the tty structure */
-void tty_add_file(struct tty_struct *tty, struct file *file)
+int tty_add_file(struct tty_struct *tty, struct file *file)
 {
 	struct tty_file_private *priv;
 
-	/* XXX: must implement proper error handling in callers */
-	priv = kmalloc(sizeof(*priv), GFP_KERNEL|__GFP_NOFAIL);
+	priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
 	priv->tty = tty;
 	priv->file = file;
@@ -208,6 +212,8 @@ void tty_add_file(struct tty_struct *tty, struct file *file)
 	spin_lock(&tty_files_lock);
 	list_add(&priv->list, &tty->tty_files);
 	spin_unlock(&tty_files_lock);
+
+	return 0;
 }
 
 /* Delete file from its tty */
@@ -1875,7 +1881,11 @@ got_driver:
 		return PTR_ERR(tty);
 	}
 
-	tty_add_file(tty, filp);
+	retval = tty_add_file(tty, filp);
+	if (retval) {
+		tty_unlock();
+		return retval;
+	}
 
 	check_tty_count(tty, "tty_open");
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -2502,6 +2512,20 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
 	return tty->ops->tiocmset(tty, file, set, clear);
 }
 
+static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
+{
+	int retval = -EINVAL;
+	struct serial_icounter_struct icount;
+	memset(&icount, 0, sizeof(icount));
+	if (tty->ops->get_icount)
+		retval = tty->ops->get_icount(tty, &icount);
+	if (retval != 0)
+		return retval;
+	if (copy_to_user(arg, &icount, sizeof(icount)))
+		return -EFAULT;
+	return 0;
+}
+
 struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
 {
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -2622,6 +2646,12 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case TIOCMBIC:
 	case TIOCMBIS:
 		return tty_tiocmset(tty, file, cmd, p);
+	case TIOCGICOUNT:
+		retval = tty_tiocgicount(tty, p);
+		/* For the moment allow fall through to the old method */
+        	if (retval != -EINVAL)
+			return retval;
+		break;
 	case TCFLSH:
 		switch (arg) {
 		case TCIFLUSH:
@@ -2783,6 +2813,20 @@ void do_SAK(struct tty_struct *tty)
 
 EXPORT_SYMBOL(do_SAK);
 
+static int dev_match_devt(struct device *dev, void *data)
+{
+	dev_t *devt = data;
+	return dev->devt == *devt;
+}
+
+/* Must put_device() after it's unused! */
+static struct device *tty_get_device(struct tty_struct *tty)
+{
+	dev_t devt = tty_devnum(tty);
+	return class_find_device(tty_class, NULL, &devt, dev_match_devt);
+}
+
+
 /**
  *	initialize_tty_struct
  *	@tty: tty to initialize
@@ -2823,6 +2867,7 @@ void initialize_tty_struct(struct tty_struct *tty,
 	tty->ops = driver->ops;
 	tty->index = idx;
 	tty_line_name(driver, idx, tty->name);
+	tty->dev = tty_get_device(tty);
 }
 
 /**
@@ -2980,6 +3025,7 @@ int tty_register_driver(struct tty_driver *driver)
 	int i;
 	dev_t dev;
 	void **p = NULL;
+	struct device *d;
 
 	if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
 		p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL);
@@ -3027,12 +3073,31 @@ int tty_register_driver(struct tty_driver *driver)
 	mutex_unlock(&tty_mutex);
 
 	if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
-		for (i = 0; i < driver->num; i++)
-		    tty_register_device(driver, i, NULL);
+		for (i = 0; i < driver->num; i++) {
+			d = tty_register_device(driver, i, NULL);
+			if (IS_ERR(d)) {
+				error = PTR_ERR(d);
+				goto err;
+			}
+		}
 	}
 	proc_tty_register_driver(driver);
 	driver->flags |= TTY_DRIVER_INSTALLED;
 	return 0;
+
+err:
+	for (i--; i >= 0; i--)
+		tty_unregister_device(driver, i);
+
+	mutex_lock(&tty_mutex);
+	list_del(&driver->tty_drivers);
+	mutex_unlock(&tty_mutex);
+
+	unregister_chrdev_region(dev, driver->num);
+	driver->ttys = NULL;
+	driver->termios = NULL;
+	kfree(p);
+	return error;
 }
 
 EXPORT_SYMBOL(tty_register_driver);

drivers/char/ttyprintk.c

@@ -0,0 +1,225 @@
+/*
+ *  linux/drivers/char/ttyprintk.c
+ *
+ *  Copyright (C) 2010  Samo Pogacnik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the smems of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+/*
+ * This pseudo device allows user to make printk messages. It is possible
+ * to store "console" messages inline with kernel messages for better analyses
+ * of the boot process, for example.
+ */
+
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+
+struct ttyprintk_port {
+	struct tty_port port;
+	struct mutex port_write_mutex;
+};
+
+static struct ttyprintk_port tpk_port;
+
+/*
+ * Our simple preformatting supports transparent output of (time-stamped)
+ * printk messages (also suitable for logging service):
+ * - any cr is replaced by nl
+ * - adds a ttyprintk source tag in front of each line
+ * - too long message is fragmeted, with '\'nl between fragments
+ * - TPK_STR_SIZE isn't really the write_room limiting factor, bcause
+ *   it is emptied on the fly during preformatting.
+ */
+#define TPK_STR_SIZE 508 /* should be bigger then max expected line length */
+#define TPK_MAX_ROOM 4096 /* we could assume 4K for instance */
+static const char *tpk_tag = "[U] "; /* U for User */
+static int tpk_curr;
+
+static int tpk_printk(const unsigned char *buf, int count)
+{
+	static char tmp[TPK_STR_SIZE + 4];
+	int i = tpk_curr;
+
+	if (buf == NULL) {
+		/* flush tmp[] */
+		if (tpk_curr > 0) {
+			/* non nl or cr terminated message - add nl */
+			tmp[tpk_curr + 0] = '\n';
+			tmp[tpk_curr + 1] = '\0';
+			printk(KERN_INFO "%s%s", tpk_tag, tmp);
+			tpk_curr = 0;
+		}
+		return i;
+	}
+
+	for (i = 0; i < count; i++) {
+		tmp[tpk_curr] = buf[i];
+		if (tpk_curr < TPK_STR_SIZE) {
+			switch (buf[i]) {
+			case '\r':
+				/* replace cr with nl */
+				tmp[tpk_curr + 0] = '\n';
+				tmp[tpk_curr + 1] = '\0';
+				printk(KERN_INFO "%s%s", tpk_tag, tmp);
+				tpk_curr = 0;
+				if (buf[i + 1] == '\n')
+					i++;
+				break;
+			case '\n':
+				tmp[tpk_curr + 1] = '\0';
+				printk(KERN_INFO "%s%s", tpk_tag, tmp);
+				tpk_curr = 0;
+				break;
+			default:
+				tpk_curr++;
+			}
+		} else {
+			/* end of tmp buffer reached: cut the message in two */
+			tmp[tpk_curr + 1] = '\\';
+			tmp[tpk_curr + 2] = '\n';
+			tmp[tpk_curr + 3] = '\0';
+			printk(KERN_INFO "%s%s", tpk_tag, tmp);
+			tpk_curr = 0;
+		}
+	}
+
+	return count;
+}
+
+/*
+ * TTY operations open function.
+ */
+static int tpk_open(struct tty_struct *tty, struct file *filp)
+{
+	tty->driver_data = &tpk_port;
+
+	return tty_port_open(&tpk_port.port, tty, filp);
+}
+
+/*
+ * TTY operations close function.
+ */
+static void tpk_close(struct tty_struct *tty, struct file *filp)
+{
+	struct ttyprintk_port *tpkp = tty->driver_data;
+
+	mutex_lock(&tpkp->port_write_mutex);
+	/* flush tpk_printk buffer */
+	tpk_printk(NULL, 0);
+	mutex_unlock(&tpkp->port_write_mutex);
+
+	tty_port_close(&tpkp->port, tty, filp);
+}
+
+/*
+ * TTY operations write function.
+ */
+static int tpk_write(struct tty_struct *tty,
+		const unsigned char *buf, int count)
+{
+	struct ttyprintk_port *tpkp = tty->driver_data;
+	int ret;
+
+
+	/* exclusive use of tpk_printk within this tty */
+	mutex_lock(&tpkp->port_write_mutex);
+	ret = tpk_printk(buf, count);
+	mutex_unlock(&tpkp->port_write_mutex);
+
+	return ret;
+}
+
+/*
+ * TTY operations write_room function.
+ */
+static int tpk_write_room(struct tty_struct *tty)
+{
+	return TPK_MAX_ROOM;
+}
+
+/*
+ * TTY operations ioctl function.
+ */
+static int tpk_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg)
+{
+	struct ttyprintk_port *tpkp = tty->driver_data;
+
+	if (!tpkp)
+		return -EINVAL;
+
+	switch (cmd) {
+	/* Stop TIOCCONS */
+	case TIOCCONS:
+		return -EOPNOTSUPP;
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static const struct tty_operations ttyprintk_ops = {
+	.open = tpk_open,
+	.close = tpk_close,
+	.write = tpk_write,
+	.write_room = tpk_write_room,
+	.ioctl = tpk_ioctl,
+};
+
+struct tty_port_operations null_ops = { };
+
+static struct tty_driver *ttyprintk_driver;
+
+static int __init ttyprintk_init(void)
+{
+	int ret = -ENOMEM;
+	void *rp;
+
+	ttyprintk_driver = alloc_tty_driver(1);
+	if (!ttyprintk_driver)
+		return ret;
+
+	ttyprintk_driver->owner = THIS_MODULE;
+	ttyprintk_driver->driver_name = "ttyprintk";
+	ttyprintk_driver->name = "ttyprintk";
+	ttyprintk_driver->major = TTYAUX_MAJOR;
+	ttyprintk_driver->minor_start = 3;
+	ttyprintk_driver->num = 1;
+	ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
+	ttyprintk_driver->init_termios = tty_std_termios;
+	ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;
+	ttyprintk_driver->flags = TTY_DRIVER_RESET_TERMIOS |
+		TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty_set_operations(ttyprintk_driver, &ttyprintk_ops);
+
+	ret = tty_register_driver(ttyprintk_driver);
+	if (ret < 0) {
+		printk(KERN_ERR "Couldn't register ttyprintk driver\n");
+		goto error;
+	}
+
+	/* create our unnumbered device */
+	rp = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 3), NULL,
+				ttyprintk_driver->name);
+	if (IS_ERR(rp)) {
+		printk(KERN_ERR "Couldn't create ttyprintk device\n");
+		ret = PTR_ERR(rp);
+		goto error;
+	}
+
+	tty_port_init(&tpk_port.port);
+	tpk_port.port.ops = &null_ops;
+	mutex_init(&tpk_port.port_write_mutex);
+
+	return 0;
+
+error:
+	put_tty_driver(ttyprintk_driver);
+	ttyprintk_driver = NULL;
+	return ret;
+}
+module_init(ttyprintk_init);

drivers/char/vc_screen.c

@@ -35,6 +35,12 @@
 #include <linux/console.h>
 #include <linux/device.h>
 #include <linux/smp_lock.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
 
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
@@ -45,6 +51,86 @@
 #undef addr
 #define HEADER_SIZE	4
 
+struct vcs_poll_data {
+	struct notifier_block notifier;
+	unsigned int cons_num;
+	bool seen_last_update;
+	wait_queue_head_t waitq;
+	struct fasync_struct *fasync;
+};
+
+static int
+vcs_notifier(struct notifier_block *nb, unsigned long code, void *_param)
+{
+	struct vt_notifier_param *param = _param;
+	struct vc_data *vc = param->vc;
+	struct vcs_poll_data *poll =
+		container_of(nb, struct vcs_poll_data, notifier);
+	int currcons = poll->cons_num;
+
+	if (code != VT_UPDATE)
+		return NOTIFY_DONE;
+
+	if (currcons == 0)
+		currcons = fg_console;
+	else
+		currcons--;
+	if (currcons != vc->vc_num)
+		return NOTIFY_DONE;
+
+	poll->seen_last_update = false;
+	wake_up_interruptible(&poll->waitq);
+	kill_fasync(&poll->fasync, SIGIO, POLL_IN);
+	return NOTIFY_OK;
+}
+
+static void
+vcs_poll_data_free(struct vcs_poll_data *poll)
+{
+	unregister_vt_notifier(&poll->notifier);
+	kfree(poll);
+}
+
+static struct vcs_poll_data *
+vcs_poll_data_get(struct file *file)
+{
+	struct vcs_poll_data *poll = file->private_data;
+
+	if (poll)
+		return poll;
+
+	poll = kzalloc(sizeof(*poll), GFP_KERNEL);
+	if (!poll)
+		return NULL;
+	poll->cons_num = iminor(file->f_path.dentry->d_inode) & 127;
+	init_waitqueue_head(&poll->waitq);
+	poll->notifier.notifier_call = vcs_notifier;
+	if (register_vt_notifier(&poll->notifier) != 0) {
+		kfree(poll);
+		return NULL;
+	}
+
+	/*
+	 * This code may be called either through ->poll() or ->fasync().
+	 * If we have two threads using the same file descriptor, they could
+	 * both enter this function, both notice that the structure hasn't
+	 * been allocated yet and go ahead allocating it in parallel, but
+	 * only one of them must survive and be shared otherwise we'd leak
+	 * memory with a dangling notifier callback.
+	 */
+	spin_lock(&file->f_lock);
+	if (!file->private_data) {
+		file->private_data = poll;
+	} else {
+		/* someone else raced ahead of us */
+		vcs_poll_data_free(poll);
+		poll = file->private_data;
+	}
+	spin_unlock(&file->f_lock);
+
+	return poll;
+}
+
 static int
 vcs_size(struct inode *inode)
 {
@@ -102,6 +188,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	struct inode *inode = file->f_path.dentry->d_inode;
 	unsigned int currcons = iminor(inode);
 	struct vc_data *vc;
+	struct vcs_poll_data *poll;
 	long pos;
 	long viewed, attr, read;
 	int col, maxcol;
@@ -134,6 +221,9 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	ret = -EINVAL;
 	if (pos < 0)
 		goto unlock_out;
+	poll = file->private_data;
+	if (count && poll)
+		poll->seen_last_update = true;
 	read = 0;
 	ret = 0;
 	while (count) {
@@ -448,6 +538,8 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	}
 	*ppos += written;
 	ret = written;
+	if (written)
+		vcs_scr_updated(vc);
 
 unlock_out:
 	release_console_sem();
@@ -457,6 +549,37 @@ unlock_out:
 	return ret;
 }
 
+static unsigned int
+vcs_poll(struct file *file, poll_table *wait)
+{
+	struct vcs_poll_data *poll = vcs_poll_data_get(file);
+	int ret = 0;
+
+	if (poll) {
+		poll_wait(file, &poll->waitq, wait);
+		if (!poll->seen_last_update)
+			ret = POLLIN | POLLRDNORM;
+	}
+	return ret;
+}
+
+static int
+vcs_fasync(int fd, struct file *file, int on)
+{
+	struct vcs_poll_data *poll = file->private_data;
+
+	if (!poll) {
+		/* don't allocate anything if all we want is disable fasync */
+		if (!on)
+			return 0;
+		poll = vcs_poll_data_get(file);
+		if (!poll)
+			return -ENOMEM;
+	}
+
+	return fasync_helper(fd, file, on, &poll->fasync);
+}
+
 static int
 vcs_open(struct inode *inode, struct file *filp)
 {
@@ -470,11 +593,23 @@ vcs_open(struct inode *inode, struct file *filp)
 	return ret;
 }
 
+static int vcs_release(struct inode *inode, struct file *file)
+{
+	struct vcs_poll_data *poll = file->private_data;
+
+	if (poll)
+		vcs_poll_data_free(poll);
+	return 0;
+}
+
 static const struct file_operations vcs_fops = {
 	.llseek		= vcs_lseek,
 	.read		= vcs_read,
 	.write		= vcs_write,
+	.poll		= vcs_poll,
+	.fasync		= vcs_fasync,
 	.open		= vcs_open,
+	.release	= vcs_release,
 };
 
 static struct class *vc_class;

drivers/char/vt.c

@@ -4182,6 +4182,11 @@ void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org)
 	}
 }
 
+void vcs_scr_updated(struct vc_data *vc)
+{
+	notify_update(vc);
+}
+
 /*
  *	Visible symbols for modules
  */

drivers/input/serio/serport.c

@@ -165,6 +165,7 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u
 	serio->open = serport_serio_open;
 	serio->close = serport_serio_close;
 	serio->port_data = serport;
+	serio->dev.parent = tty->dev;
 
 	serio_register_port(serport->serio);
 	printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name));

drivers/net/usb/hso.c

@@ -1645,11 +1645,11 @@ hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
  * NB: both 1->0 and 0->1 transitions are counted except for
  *     RI where only 0->1 is counted.
  */
-static int hso_get_count(struct hso_serial *serial,
-			  struct serial_icounter_struct __user *icnt)
+static int hso_get_count(struct tty_struct *tty,
+		  struct serial_icounter_struct *icount)
 {
-	struct serial_icounter_struct icount;
 	struct uart_icount cnow;
+	struct hso_serial *serial = get_serial_by_tty(tty);
 	struct hso_tiocmget  *tiocmget = serial->tiocmget;
 
 	memset(&icount, 0, sizeof(struct serial_icounter_struct));
@@ -1660,19 +1660,19 @@ static int hso_get_count(struct hso_serial *serial,
 	memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
 	spin_unlock_irq(&serial->serial_lock);
 
-	icount.cts         = cnow.cts;
-	icount.dsr         = cnow.dsr;
-	icount.rng         = cnow.rng;
-	icount.dcd         = cnow.dcd;
-	icount.rx          = cnow.rx;
-	icount.tx          = cnow.tx;
-	icount.frame       = cnow.frame;
-	icount.overrun     = cnow.overrun;
-	icount.parity      = cnow.parity;
-	icount.brk         = cnow.brk;
-	icount.buf_overrun = cnow.buf_overrun;
+	icount->cts         = cnow.cts;
+	icount->dsr         = cnow.dsr;
+	icount->rng         = cnow.rng;
+	icount->dcd         = cnow.dcd;
+	icount->rx          = cnow.rx;
+	icount->tx          = cnow.tx;
+	icount->frame       = cnow.frame;
+	icount->overrun     = cnow.overrun;
+	icount->parity      = cnow.parity;
+	icount->brk         = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
 
-	return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+	return 0;
 }
 
 
@@ -1764,10 +1764,6 @@ static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
 	case TIOCMIWAIT:
 		ret = hso_wait_modem_status(serial, arg);
 		break;
-
-	case TIOCGICOUNT:
-		ret = hso_get_count(serial, uarg);
-		break;
 	default:
 		ret = -ENOIOCTLCMD;
 		break;
@@ -3300,6 +3296,7 @@ static const struct tty_operations hso_serial_ops = {
 	.chars_in_buffer = hso_serial_chars_in_buffer,
 	.tiocmget = hso_serial_tiocmget,
 	.tiocmset = hso_serial_tiocmset,
+	.get_icount = hso_get_count,
 	.unthrottle = hso_unthrottle
 };
 

drivers/serial/68360serial.c

@@ -1381,6 +1381,30 @@ static void send_break(ser_info_t *info, unsigned int duration)
 }
 
 
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int rs_360_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	ser_info_t *info = (ser_info_t *)tty->driver_data;
+	struct async_icount cnow;
+
+	local_irq_disable();
+	cnow = info->state->icount;
+	local_irq_enable();
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+
+	return 0;
+}
+
 static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
 {
@@ -1394,7 +1418,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
 	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
 		return -ENODEV;
 
-	if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	if (cmd != TIOCMIWAIT) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -1477,31 +1501,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
 			return 0;
 #endif
 
-		/* 
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			local_irq_disable();
-			cnow = info->state->icount;
-			local_irq_enable();
-			p_cuser = (struct serial_icounter_struct *) arg;
-/* 			error = put_user(cnow.cts, &p_cuser->cts); */
-/* 			if (error) return error; */
-/* 			error = put_user(cnow.dsr, &p_cuser->dsr); */
-/* 			if (error) return error; */
-/* 			error = put_user(cnow.rng, &p_cuser->rng); */
-/* 			if (error) return error; */
-/* 			error = put_user(cnow.dcd, &p_cuser->dcd); */
-/* 			if (error) return error; */
-
-			put_user(cnow.cts, &p_cuser->cts);
-			put_user(cnow.dsr, &p_cuser->dsr);
-			put_user(cnow.rng, &p_cuser->rng);
-			put_user(cnow.dcd, &p_cuser->dcd);
-			return 0;
 
 		default:
 			return -ENOIOCTLCMD;

drivers/serial/8250.c

@@ -31,6 +31,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
+#include <linux/ratelimit.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_reg.h>
 #include <linux/serial_core.h>
@@ -154,12 +155,6 @@ struct uart_8250_port {
 	unsigned char		lsr_saved_flags;
 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
 	unsigned char		msr_saved_flags;
-
-	/*
-	 * We provide a per-port pm hook.
-	 */
-	void			(*pm)(struct uart_port *port,
-				      unsigned int state, unsigned int old);
 };
 
 struct irq_info {
@@ -1606,8 +1601,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 
 		if (l == i->head && pass_counter++ > PASS_LIMIT) {
 			/* If we hit this, we're dead. */
-			printk(KERN_ERR "serial8250: too much work for "
-				"irq%d\n", irq);
+			printk_ratelimited(KERN_ERR
+				"serial8250: too much work for irq%d\n", irq);
 			break;
 		}
 	} while (l != end);
@@ -1722,12 +1717,6 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up)
 	mutex_unlock(&hash_mutex);
 }
 
-/* Base timer interval for polling */
-static inline int poll_timeout(int timeout)
-{
-	return timeout > 6 ? (timeout / 2 - 2) : 1;
-}
-
 /*
  * This function is used to handle ports that do not have an
  * interrupt.  This doesn't work very well for 16450's, but gives
@@ -1742,7 +1731,7 @@ static void serial8250_timeout(unsigned long data)
 	iir = serial_in(up, UART_IIR);
 	if (!(iir & UART_IIR_NO_INT))
 		serial8250_handle_port(up);
-	mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
+	mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
 }
 
 static void serial8250_backup_timeout(unsigned long data)
@@ -1787,7 +1776,7 @@ static void serial8250_backup_timeout(unsigned long data)
 
 	/* Standard timer interval plus 0.2s to keep the port running */
 	mod_timer(&up->timer,
-		jiffies + poll_timeout(up->port.timeout) + HZ / 5);
+		jiffies + uart_poll_timeout(&up->port) + HZ / 5);
 }
 
 static unsigned int serial8250_tx_empty(struct uart_port *port)
@@ -1867,15 +1856,17 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 	unsigned int status, tmout = 10000;
 
 	/* Wait up to 10ms for the character(s) to be sent. */
-	do {
+	for (;;) {
 		status = serial_in(up, UART_LSR);
 
 		up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
 
+		if ((status & bits) == bits)
+			break;
 		if (--tmout == 0)
 			break;
 		udelay(1);
-	} while ((status & bits) != bits);
+	}
 
 	/* Wait up to 1s for flow control if necessary */
 	if (up->port.flags & UPF_CONS_FLOW) {
@@ -2069,7 +2060,7 @@ static int serial8250_startup(struct uart_port *port)
 		up->timer.function = serial8250_backup_timeout;
 		up->timer.data = (unsigned long)up;
 		mod_timer(&up->timer, jiffies +
-			  poll_timeout(up->port.timeout) + HZ / 5);
+			uart_poll_timeout(port) + HZ / 5);
 	}
 
 	/*
@@ -2079,7 +2070,7 @@ static int serial8250_startup(struct uart_port *port)
 	 */
 	if (!is_real_interrupt(up->port.irq)) {
 		up->timer.data = (unsigned long)up;
-		mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
+		mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
 	} else {
 		retval = serial_link_irq_chain(up);
 		if (retval)
@@ -2440,16 +2431,24 @@ serial8250_set_ldisc(struct uart_port *port, int new)
 		port->flags &= ~UPF_HARDPPS_CD;
 }
 
-static void
-serial8250_pm(struct uart_port *port, unsigned int state,
-	      unsigned int oldstate)
+
+void serial8250_do_pm(struct uart_port *port, unsigned int state,
+		      unsigned int oldstate)
 {
 	struct uart_8250_port *p = (struct uart_8250_port *)port;
 
 	serial8250_set_sleep(p, state != 0);
+}
+EXPORT_SYMBOL(serial8250_do_pm);
 
-	if (p->pm)
-		p->pm(port, state, oldstate);
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+	      unsigned int oldstate)
+{
+	if (port->pm)
+		port->pm(port, state, oldstate);
+	else
+		serial8250_do_pm(port, state, oldstate);
 }
 
 static unsigned int serial8250_port_size(struct uart_8250_port *pt)
@@ -2674,6 +2673,16 @@ static struct uart_ops serial8250_pops = {
 
 static struct uart_8250_port serial8250_ports[UART_NR];
 
+static void (*serial8250_isa_config)(int port, struct uart_port *up,
+	unsigned short *capabilities);
+
+void serial8250_set_isa_configurator(
+	void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
+{
+	serial8250_isa_config = v;
+}
+EXPORT_SYMBOL(serial8250_set_isa_configurator);
+
 static void __init serial8250_isa_init_ports(void)
 {
 	struct uart_8250_port *up;
@@ -2719,6 +2728,9 @@ static void __init serial8250_isa_init_ports(void)
 		up->port.regshift = old_serial_port[i].iomem_reg_shift;
 		set_io_from_upio(&up->port);
 		up->port.irqflags |= irqflag;
+		if (serial8250_isa_config != NULL)
+			serial8250_isa_config(i, &up->port, &up->capabilities);
+
 	}
 }
 
@@ -3010,6 +3022,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.serial_in		= p->serial_in;
 		port.serial_out		= p->serial_out;
 		port.set_termios	= p->set_termios;
+		port.pm			= p->pm;
 		port.dev		= &dev->dev;
 		port.irqflags		|= irqflag;
 		ret = serial8250_register_port(&port);
@@ -3176,6 +3189,12 @@ int serial8250_register_port(struct uart_port *port)
 		/*  Possibly override set_termios call */
 		if (port->set_termios)
 			uart->port.set_termios = port->set_termios;
+		if (port->pm)
+			uart->port.pm = port->pm;
+
+		if (serial8250_isa_config != NULL)
+			serial8250_isa_config(0, &uart->port,
+					&uart->capabilities);
 
 		ret = uart_add_one_port(&serial8250_reg, &uart->port);
 		if (ret == 0)

drivers/serial/Kconfig

@@ -718,13 +718,6 @@ config SERIAL_MRST_MAX3110
 	  the Intel Moorestown platform. On other systems use the max3100
 	  driver.
 
-config MRST_MAX3110_IRQ
-	boolean "Enable GPIO IRQ for Max3110 over Moorestown"
-	default n
-	depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL
-	help
-	  This has to be enabled after Moorestown GPIO driver is loaded
-
 config SERIAL_MFD_HSU
 	tristate "Medfield High Speed UART support"
 	depends on PCI

drivers/serial/altera_uart.c

@@ -15,6 +15,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/timer.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/console.h>
@@ -27,6 +28,8 @@
 #include <linux/altera_uart.h>
 
 #define DRV_NAME "altera_uart"
+#define SERIAL_ALTERA_MAJOR 204
+#define SERIAL_ALTERA_MINOR 213
 
 /*
  * Altera UART register definitions according to the Nios UART datasheet:
@@ -76,13 +79,28 @@
  */
 struct altera_uart {
 	struct uart_port port;
+	struct timer_list tmr;
 	unsigned int sigs;	/* Local copy of line sigs */
 	unsigned short imr;	/* Local IMR mirror */
 };
 
+static u32 altera_uart_readl(struct uart_port *port, int reg)
+{
+	struct altera_uart_platform_uart *platp = port->private_data;
+
+	return readl(port->membase + (reg << platp->bus_shift));
+}
+
+static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
+{
+	struct altera_uart_platform_uart *platp = port->private_data;
+
+	writel(dat, port->membase + (reg << platp->bus_shift));
+}
+
 static unsigned int altera_uart_tx_empty(struct uart_port *port)
 {
-	return (readl(port->membase + ALTERA_UART_STATUS_REG) &
+	return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
 		ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
 }
 
@@ -91,8 +109,7 @@ static unsigned int altera_uart_get_mctrl(struct uart_port *port)
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
 	unsigned int sigs;
 
-	sigs =
-	    (readl(port->membase + ALTERA_UART_STATUS_REG) &
+	sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
 	     ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
 	sigs |= (pp->sigs & TIOCM_RTS);
 
@@ -108,7 +125,7 @@ static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
 		pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
 	else
 		pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
-	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
 }
 
 static void altera_uart_start_tx(struct uart_port *port)
@@ -116,7 +133,7 @@ static void altera_uart_start_tx(struct uart_port *port)
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
 
 	pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
-	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
 }
 
 static void altera_uart_stop_tx(struct uart_port *port)
@@ -124,7 +141,7 @@ static void altera_uart_stop_tx(struct uart_port *port)
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
 
 	pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
-	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
 }
 
 static void altera_uart_stop_rx(struct uart_port *port)
@@ -132,7 +149,7 @@ static void altera_uart_stop_rx(struct uart_port *port)
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
 
 	pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
-	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
 }
 
 static void altera_uart_break_ctl(struct uart_port *port, int break_state)
@@ -145,7 +162,7 @@ static void altera_uart_break_ctl(struct uart_port *port, int break_state)
 		pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
 	else
 		pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
-	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -168,7 +185,8 @@ static void altera_uart_set_termios(struct uart_port *port,
 	tty_termios_encode_baud_rate(termios, baud, baud);
 
 	spin_lock_irqsave(&port->lock, flags);
-	writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
+	uart_update_timeout(port, termios->c_cflag, baud);
+	altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -178,14 +196,15 @@ static void altera_uart_rx_chars(struct altera_uart *pp)
 	unsigned char ch, flag;
 	unsigned short status;
 
-	while ((status = readl(port->membase + ALTERA_UART_STATUS_REG)) &
+	while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) &
 	       ALTERA_UART_STATUS_RRDY_MSK) {
-		ch = readl(port->membase + ALTERA_UART_RXDATA_REG);
+		ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
 		flag = TTY_NORMAL;
 		port->icount.rx++;
 
 		if (status & ALTERA_UART_STATUS_E_MSK) {
-			writel(status, port->membase + ALTERA_UART_STATUS_REG);
+			altera_uart_writel(port, status,
+					   ALTERA_UART_STATUS_REG);
 
 			if (status & ALTERA_UART_STATUS_BRK_MSK) {
 				port->icount.brk++;
@@ -225,18 +244,18 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
 
 	if (port->x_char) {
 		/* Send special char - probably flow control */
-		writel(port->x_char, port->membase + ALTERA_UART_TXDATA_REG);
+		altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
 		port->x_char = 0;
 		port->icount.tx++;
 		return;
 	}
 
-	while (readl(port->membase + ALTERA_UART_STATUS_REG) &
+	while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
 	       ALTERA_UART_STATUS_TRDY_MSK) {
 		if (xmit->head == xmit->tail)
 			break;
-		writel(xmit->buf[xmit->tail],
-		       port->membase + ALTERA_UART_TXDATA_REG);
+		altera_uart_writel(port, xmit->buf[xmit->tail],
+		       ALTERA_UART_TXDATA_REG);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
 	}
@@ -246,7 +265,7 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
 
 	if (xmit->head == xmit->tail) {
 		pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
-		writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+		altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
 	}
 }
 
@@ -256,7 +275,7 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
 	unsigned int isr;
 
-	isr = readl(port->membase + ALTERA_UART_STATUS_REG) & pp->imr;
+	isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
 
 	spin_lock(&port->lock);
 	if (isr & ALTERA_UART_STATUS_RRDY_MSK)
@@ -268,14 +287,23 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
 	return IRQ_RETVAL(isr);
 }
 
+static void altera_uart_timer(unsigned long data)
+{
+	struct uart_port *port = (void *)data;
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+
+	altera_uart_interrupt(0, port);
+	mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
+}
+
 static void altera_uart_config_port(struct uart_port *port, int flags)
 {
 	port->type = PORT_ALTERA_UART;
 
 	/* Clear mask, so no surprise interrupts. */
-	writel(0, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG);
 	/* Clear status register */
-	writel(0, port->membase + ALTERA_UART_STATUS_REG);
+	altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG);
 }
 
 static int altera_uart_startup(struct uart_port *port)
@@ -284,6 +312,12 @@ static int altera_uart_startup(struct uart_port *port)
 	unsigned long flags;
 	int ret;
 
+	if (!port->irq) {
+		setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
+		mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
+		return 0;
+	}
+
 	ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED,
 			DRV_NAME, port);
 	if (ret) {
@@ -316,7 +350,10 @@ static void altera_uart_shutdown(struct uart_port *port)
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	free_irq(port->irq, port);
+	if (port->irq)
+		free_irq(port->irq, port);
+	else
+		del_timer_sync(&pp->tmr);
 }
 
 static const char *altera_uart_type(struct uart_port *port)
@@ -384,8 +421,9 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
 		port->iotype = SERIAL_IO_MEM;
 		port->irq = platp[i].irq;
 		port->uartclk = platp[i].uartclk;
-		port->flags = ASYNC_BOOT_AUTOCONF;
+		port->flags = UPF_BOOT_AUTOCONF;
 		port->ops = &altera_uart_ops;
+		port->private_data = platp;
 	}
 
 	return 0;
@@ -393,7 +431,7 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
 
 static void altera_uart_console_putc(struct uart_port *port, const char c)
 {
-	while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
+	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
 		 ALTERA_UART_STATUS_TRDY_MSK))
 		cpu_relax();
 
@@ -423,7 +461,7 @@ static int __init altera_uart_console_setup(struct console *co, char *options)
 	if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
 		return -EINVAL;
 	port = &altera_uart_ports[co->index].port;
-	if (port->membase == 0)
+	if (!port->membase)
 		return -ENODEV;
 
 	if (options)
@@ -435,7 +473,7 @@ static int __init altera_uart_console_setup(struct console *co, char *options)
 static struct uart_driver altera_uart_driver;
 
 static struct console altera_uart_console = {
-	.name	= "ttyS",
+	.name	= "ttyAL",
 	.write	= altera_uart_console_write,
 	.device	= uart_console_device,
 	.setup	= altera_uart_console_setup,
@@ -466,9 +504,9 @@ console_initcall(altera_uart_console_init);
 static struct uart_driver altera_uart_driver = {
 	.owner		= THIS_MODULE,
 	.driver_name	= DRV_NAME,
-	.dev_name	= "ttyS",
-	.major		= TTY_MAJOR,
-	.minor		= 64,
+	.dev_name	= "ttyAL",
+	.major		= SERIAL_ALTERA_MAJOR,
+	.minor		= SERIAL_ALTERA_MINOR,
 	.nr		= CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
 	.cons		= ALTERA_UART_CONSOLE,
 };
@@ -477,38 +515,55 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 {
 	struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
 	struct uart_port *port;
-	int i;
+	struct resource *res_mem;
+	struct resource *res_irq;
+	int i = pdev->id;
 
-	for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_uart_ports[i].port;
+	/* -1 emphasizes that the platform must have one port, no .N suffix */
+	if (i == -1)
+		i = 0;
 
-		port->line = i;
-		port->type = PORT_ALTERA_UART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->uartclk = platp[i].uartclk;
-		port->ops = &altera_uart_ops;
-		port->flags = ASYNC_BOOT_AUTOCONF;
+	if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
+		return -EINVAL;
 
-		uart_add_one_port(&altera_uart_driver, port);
-	}
+	port = &altera_uart_ports[i].port;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res_mem)
+		port->mapbase = res_mem->start;
+	else if (platp->mapbase)
+		port->mapbase = platp->mapbase;
+	else
+		return -EINVAL;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res_irq)
+		port->irq = res_irq->start;
+	else if (platp->irq)
+		port->irq = platp->irq;
+
+	port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
+	if (!port->membase)
+		return -ENOMEM;
+
+	port->line = i;
+	port->type = PORT_ALTERA_UART;
+	port->iotype = SERIAL_IO_MEM;
+	port->uartclk = platp->uartclk;
+	port->ops = &altera_uart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+	port->private_data = platp;
+
+	uart_add_one_port(&altera_uart_driver, port);
 
 	return 0;
 }
 
 static int __devexit altera_uart_remove(struct platform_device *pdev)
 {
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++) {
-		port = &altera_uart_ports[i].port;
-		if (port)
-			uart_remove_one_port(&altera_uart_driver, port);
-	}
+	struct uart_port *port = &altera_uart_ports[pdev->id].port;
 
+	uart_remove_one_port(&altera_uart_driver, port);
 	return 0;
 }
 
@@ -550,3 +605,4 @@ MODULE_DESCRIPTION("Altera UART driver");
 MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR);

drivers/serial/bfin_sport_uart.c

@@ -131,7 +131,12 @@ static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate)
 	pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
 
 	tclkdiv = sclk / (2 * baud_rate) - 1;
-	rclkdiv = sclk / (2 * baud_rate * 2) - 1;
+	/* The actual uart baud rate of devices vary between +/-2%. The sport
+	 * RX sample rate should be faster than the double of the worst case,
+	 * otherwise, wrong data are received. So, set sport RX clock to be
+	 * 3% faster.
+	 */
+	rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1;
 	SPORT_PUT_TCLKDIV(up, tclkdiv);
 	SPORT_PUT_RCLKDIV(up, rclkdiv);
 	SSYNC();

drivers/serial/imx.c

@@ -327,14 +327,13 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
 {
 	struct circ_buf *xmit = &sport->port.state->xmit;
 
-	while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
+	while (!uart_circ_empty(xmit) &&
+			!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
 		/* send xmit->buf[xmit->tail]
 		 * out the port here */
 		writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		sport->port.icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)

drivers/serial/jsm/jsm_driver.c

@@ -172,13 +172,15 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
 		 	jsm_uart_port_init here! */
 		dev_err(&pdev->dev, "memory allocation for flipbuf failed\n");
 		rc = -ENOMEM;
-		goto out_free_irq;
+		goto out_free_uart;
 	}
 
 	pci_set_drvdata(pdev, brd);
 	pci_save_state(pdev);
 
 	return 0;
+ out_free_uart:
+	jsm_remove_uart_port(brd);
  out_free_irq:
 	jsm_remove_uart_port(brd);
 	free_irq(brd->irq, brd);

drivers/serial/max3107.c

@@ -986,12 +986,14 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
 	s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
 	if (!s->rxbuf) {
 		pr_err("Allocating RX buffer failed\n");
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto err_free4;
 	}
 	s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
 	if (!s->rxstr) {
 		pr_err("Allocating RX buffer failed\n");
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto err_free3;
 	}
 	/* SPI Tx buffer
 	 * SPI transfer buffer
@@ -1002,7 +1004,8 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
 	s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
 	if (!s->txbuf) {
 		pr_err("Allocating TX buffer failed\n");
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto err_free2;
 	}
 	/* Initialize shared data lock */
 	spin_lock_init(&s->data_lock);
@@ -1021,13 +1024,15 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
 	buf[0] = MAX3107_REVID_REG;
 	if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
 		dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
-		return -EIO;
+		retval = -EIO;
+		goto err_free1;
 	}
 	if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
 		(buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
 		dev_err(&s->spi->dev, "REVID %x does not match\n",
 				(buf[0] & MAX3107_SPI_RX_DATA_MASK));
-		return -ENODEV;
+		retval = -ENODEV;
+		goto err_free1;
 	}
 
 	/* Disable all interrupts */
@@ -1047,7 +1052,8 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
 	/* Perform SPI transfer */
 	if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
 		dev_err(&s->spi->dev, "SPI transfer for init failed\n");
-		return -EIO;
+		retval = -EIO;
+		goto err_free1;
 	}
 
 	/* Register UART driver */
@@ -1055,7 +1061,7 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
 		retval = uart_register_driver(&max3107_uart_driver);
 		if (retval) {
 			dev_err(&s->spi->dev, "Registering UART driver failed\n");
-			return retval;
+			goto err_free1;
 		}
 		driver_registered = 1;
 	}
@@ -1074,13 +1080,13 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
 	retval = uart_add_one_port(&max3107_uart_driver, &s->port);
 	if (retval < 0) {
 		dev_err(&s->spi->dev, "Adding UART port failed\n");
-		return retval;
+		goto err_free1;
 	}
 
 	if (pdata->configure) {
 		retval = pdata->configure(s);
 		if (retval < 0)
-			return retval;
+			goto err_free1;
 	}
 
 	/* Go to suspend mode */
@@ -1088,6 +1094,16 @@ int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
 		pdata->hw_suspend(s, 1);
 
 	return 0;
+
+err_free1:
+	kfree(s->txbuf);
+err_free2:
+	kfree(s->rxstr);
+err_free3:
+	kfree(s->rxbuf);
+err_free4:
+	kfree(s);
+	return retval;
 }
 EXPORT_SYMBOL_GPL(max3107_probe);
 

drivers/serial/mfd.c

@@ -172,6 +172,9 @@ static ssize_t port_show_regs(struct file *file, char __user *user_buf,
 	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
 			"DIV: \t\t0x%08x\n", serial_in(up, UART_DIV));
 
+	if (len > HSU_REGS_BUFSIZE)
+		len = HSU_REGS_BUFSIZE;
+
 	ret =  simple_read_from_buffer(user_buf, count, ppos, buf, len);
 	kfree(buf);
 	return ret;
@@ -219,6 +222,9 @@ static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
 	len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
 			"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR));
 
+	if (len > HSU_REGS_BUFSIZE)
+		len = HSU_REGS_BUFSIZE;
+
 	ret =  simple_read_from_buffer(user_buf, count, ppos, buf, len);
 	kfree(buf);
 	return ret;
@@ -925,39 +931,52 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
 		cval |= UART_LCR_EPAR;
 
 	/*
+	 * The base clk is 50Mhz, and the baud rate come from:
+	 *	baud = 50M * MUL / (DIV * PS * DLAB)
+	 *
 	 * For those basic low baud rate we can get the direct
-	 * scalar from 2746800, like 115200 = 2746800/24, for those
-	 * higher baud rate, we have to handle them case by case,
-	 * but DIV reg is never touched as its default value 0x3d09
+	 * scalar from 2746800, like 115200 = 2746800/24. For those
+	 * higher baud rate, we handle them case by case, mainly by
+	 * adjusting the MUL/PS registers, and DIV register is kept
+	 * as default value 0x3d09 to make things simple
 	 */
 	baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
-	quot = uart_get_divisor(port, baud);
 
+	quot = 1;
 	switch (baud) {
 	case 3500000:
 		mul = 0x3345;
 		ps = 0xC;
-		quot = 1;
+		break;
+	case 3000000:
+		mul = 0x2EE0;
 		break;
 	case 2500000:
 		mul = 0x2710;
-		ps = 0x10;
-		quot = 1;
 		break;
-	case 18432000:
+	case 2000000:
+		mul = 0x1F40;
+		break;
+	case 1843200:
 		mul = 0x2400;
-		ps = 0x10;
-		quot = 1;
 		break;
 	case 1500000:
-		mul = 0x1D4C;
-		ps = 0xc;
-		quot = 1;
+		mul = 0x1770;
+		break;
+	case 1000000:
+		mul = 0xFA0;
+		break;
+	case 500000:
+		mul = 0x7D0;
 		break;
 	default:
-		;
+		/* Use uart_get_divisor to get quot for other baud rates */
+		quot = 0;
 	}
 
+	if (!quot)
+		quot = uart_get_divisor(port, baud);
+
 	if ((up->port.uartclk / quot) < (2400 * 16))
 		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B;
 	else if ((up->port.uartclk / quot) < (230400 * 16))

drivers/serial/mrst_max3110.c

@@ -1,7 +1,7 @@
 /*
- *  max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown
+ *  mrst_max3110.c - spi uart protocol driver for Maxim 3110
  *
- *  Copyright (C) Intel 2008 Feng Tang <feng.tang@intel.com>
+ * Copyright (c) 2008-2010, Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -32,18 +32,13 @@
 #include <linux/irq.h>
 #include <linux/init.h>
 #include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/platform_device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
 
 #include <linux/kthread.h>
-#include <linux/delay.h>
-#include <asm/atomic.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/dw_spi.h>
 
 #include "mrst_max3110.h"
 
@@ -56,7 +51,7 @@
 struct uart_max3110 {
 	struct uart_port port;
 	struct spi_device *spi;
-	char *name;
+	char name[24];
 
 	wait_queue_head_t wq;
 	struct task_struct *main_thread;
@@ -67,35 +62,30 @@ struct uart_max3110 {
 	u16 cur_conf;
 	u8 clock;
 	u8 parity, word_7bits;
+	u16 irq;
 
 	unsigned long uart_flags;
 
 	/* console related */
 	struct circ_buf con_xmit;
-
-	/* irq related */
-	u16 irq;
 };
 
 /* global data structure, may need be removed */
-struct uart_max3110 *pmax;
-static inline void receive_char(struct uart_max3110 *max, u8 ch);
+static struct uart_max3110 *pmax;
+
 static void receive_chars(struct uart_max3110 *max,
 				unsigned char *str, int len);
-static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf);
-static void max3110_console_receive(struct uart_max3110 *max);
+static int max3110_read_multi(struct uart_max3110 *max, u8 *buf);
+static void max3110_con_receive(struct uart_max3110 *max);
 
-int max3110_write_then_read(struct uart_max3110 *max,
-		const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast)
+static int max3110_write_then_read(struct uart_max3110 *max,
+		const void *txbuf, void *rxbuf, unsigned len, int always_fast)
 {
 	struct spi_device *spi = max->spi;
 	struct spi_message	message;
 	struct spi_transfer	x;
 	int ret;
 
-	if (!txbuf || !rxbuf)
-		return -EINVAL;
-
 	spi_message_init(&message);
 	memset(&x, 0, sizeof x);
 	x.len = len;
@@ -104,7 +94,7 @@ int max3110_write_then_read(struct uart_max3110 *max,
 	spi_message_add_tail(&x, &message);
 
 	if (always_fast)
-		x.speed_hz = 3125000;
+		x.speed_hz = spi->max_speed_hz;
 	else if (max->baud)
 		x.speed_hz = max->baud;
 
@@ -113,58 +103,80 @@ int max3110_write_then_read(struct uart_max3110 *max,
 	return ret;
 }
 
-/* Write a u16 to the device, and return one u16 read back */
-int max3110_out(struct uart_max3110 *max, const u16 out)
+/* Write a 16b word to the device */
+static int max3110_out(struct uart_max3110 *max, const u16 out)
 {
-	u16 tmp;
+	void *buf;
+	u16 *obuf, *ibuf;
+	u8  ch;
 	int ret;
 
-	ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1);
-	if (ret)
-		return ret;
+	buf = kzalloc(8, GFP_KERNEL | GFP_DMA);
+	if (!buf)
+		return -ENOMEM;
+
+	obuf = buf;
+	ibuf = buf + 4;
+	*obuf = out;
+	ret = max3110_write_then_read(max, obuf, ibuf, 2, 1);
+	if (ret) {
+		pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n",
+				__func__, ret, out);
+		goto exit;
+	}
 
 	/* If some valid data is read back */
-	if (tmp & MAX3110_READ_DATA_AVAILABLE)
-		receive_char(max, (tmp & 0xff));
+	if (*ibuf & MAX3110_READ_DATA_AVAILABLE) {
+		ch = *ibuf & 0xff;
+		receive_chars(max, &ch, 1);
+	}
 
+exit:
+	kfree(buf);
 	return ret;
 }
 
-#define MAX_READ_LEN	20
 /*
  * This is usually used to read data from SPIC RX FIFO, which doesn't
- * need any delay like flushing character out. It returns how many
- * valide bytes are read back
+ * need any delay like flushing character out.
+ *
+ * Return how many valide bytes are read back
  */
-static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf)
+static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf)
 {
-	u16 out[MAX_READ_LEN], in[MAX_READ_LEN];
-	u8 *pbuf, valid_str[MAX_READ_LEN];
-	int i, j, bytelen;
+	void *buf;
+	u16 *obuf, *ibuf;
+	u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH];
+	int i, j, blen;
 
-	if (len > MAX_READ_LEN) {
-		pr_err(PR_FMT "read len %d is too large\n", len);
+	blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
+	buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
+	if (!buf) {
+		pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__);
 		return 0;
 	}
 
-	bytelen = len * 2;
-	memset(out, 0, bytelen);
-	memset(in, 0, bytelen);
+	/* tx/rx always have the same length */
+	obuf = buf;
+	ibuf = buf + blen;
 
-	if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1))
+	if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) {
+		kfree(buf);
 		return 0;
+	}
 
-	/* If caller don't provide a buffer, then handle received char */
-	pbuf = buf ? buf : valid_str;
+	/* If caller doesn't provide a buffer, then handle received char */
+	pbuf = rxbuf ? rxbuf : valid_str;
 
-	for (i = 0, j = 0; i < len; i++) {
-		if (in[i] & MAX3110_READ_DATA_AVAILABLE)
-			pbuf[j++] = (u8)(in[i] & 0xff);
+	for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) {
+		if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
+			pbuf[j++] = ibuf[i] & 0xff;
 	}
 
 	if (j && (pbuf == valid_str))
 		receive_chars(max, valid_str, j);
 
+	kfree(buf);
 	return j;
 }
 
@@ -178,10 +190,6 @@ static void serial_m3110_con_putchar(struct uart_port *port, int ch)
 		xmit->buf[xmit->head] = (char)ch;
 		xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
 	}
-
-
-	if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags))
-		wake_up_process(max->main_thread);
 }
 
 /*
@@ -197,6 +205,9 @@ static void serial_m3110_con_write(struct console *co,
 		return;
 
 	uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
+
+	if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags))
+		wake_up_process(pmax->main_thread);
 }
 
 static int __init
@@ -210,6 +221,9 @@ serial_m3110_con_setup(struct console *co, char *options)
 
 	pr_info(PR_FMT "setting up console\n");
 
+	if (co->index == -1)
+		co->index = 0;
+
 	if (!max) {
 		pr_err(PR_FMT "pmax is NULL, return");
 		return -ENODEV;
@@ -240,8 +254,6 @@ static struct console serial_m3110_console = {
 	.data		= &serial_m3110_reg,
 };
 
-#define MRST_CONSOLE	(&serial_m3110_console)
-
 static unsigned int serial_m3110_tx_empty(struct uart_port *port)
 {
 	return 1;
@@ -259,32 +271,44 @@ static void serial_m3110_stop_rx(struct uart_port *port)
 }
 
 #define WORDS_PER_XFER	128
-static inline void send_circ_buf(struct uart_max3110 *max,
+static void send_circ_buf(struct uart_max3110 *max,
 				struct circ_buf *xmit)
 {
-	int len, left = 0;
-	u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER];
+	void *buf;
+	u16 *obuf, *ibuf;
 	u8 valid_str[WORDS_PER_XFER];
-	int i, j;
+	int i, j, len, blen, dma_size, left, ret = 0;
+
+
+	dma_size = WORDS_PER_XFER * sizeof(u16) * 2;
+	buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA);
+	if (!buf)
+		return;
+	obuf = buf;
+	ibuf = buf + dma_size/2;
 
 	while (!uart_circ_empty(xmit)) {
 		left = uart_circ_chars_pending(xmit);
 		while (left) {
-			len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left;
+			len = min(left, WORDS_PER_XFER);
+			blen = len * sizeof(u16);
+			memset(ibuf, 0, blen);
 
-			memset(obuf, 0, len * 2);
-			memset(ibuf, 0, len * 2);
 			for (i = 0; i < len; i++) {
 				obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
 				xmit->tail = (xmit->tail + 1) &
 						(UART_XMIT_SIZE - 1);
 			}
-			max3110_write_then_read(max, (u8 *)obuf,
-						(u8 *)ibuf, len * 2, 0);
+
+			/* Fail to send msg to console is not very critical */
+			ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
+			if (ret)
+				pr_warning(PR_FMT "%s(): get err msg %d\n",
+						__func__, ret);
 
 			for (i = 0, j = 0; i < len; i++) {
 				if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
-					valid_str[j++] = (u8)(ibuf[i] & 0xff);
+					valid_str[j++] = ibuf[i] & 0xff;
 			}
 
 			if (j)
@@ -294,6 +318,8 @@ static inline void send_circ_buf(struct uart_max3110 *max,
 			left -= len;
 		}
 	}
+
+	kfree(buf);
 }
 
 static void transmit_char(struct uart_max3110 *max)
@@ -313,8 +339,10 @@ static void transmit_char(struct uart_max3110 *max)
 		serial_m3110_stop_tx(port);
 }
 
-/* This will be called by uart_write() and tty_write, can't
- * go to sleep */
+/*
+ * This will be called by uart_write() and tty_write, can't
+ * go to sleep
+ */
 static void serial_m3110_start_tx(struct uart_port *port)
 {
 	struct uart_max3110 *max =
@@ -336,7 +364,7 @@ static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
 
 	tty = port->state->port.tty;
 	if (!tty)
-		return;	/* receive some char before the tty is opened */
+		return;
 
 	while (len) {
 		usable = tty_buffer_request_room(tty, len);
@@ -344,32 +372,37 @@ static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
 			tty_insert_flip_string(tty, str, usable);
 			str += usable;
 			port->icount.rx += usable;
-			tty_flip_buffer_push(tty);
 		}
 		len -= usable;
 	}
+	tty_flip_buffer_push(tty);
 }
 
-static inline void receive_char(struct uart_max3110 *max, u8 ch)
-{
-	receive_chars(max, &ch, 1);
-}
-
-static void max3110_console_receive(struct uart_max3110 *max)
+/*
+ * This routine will be used in read_thread or RX IRQ handling,
+ * it will first do one round buffer read(8 words), if there is some
+ * valid RX data, will try to read 5 more rounds till all data
+ * is read out.
+ *
+ * Use stack space as data buffer to save some system load, and chose
+ * 504 Btyes as a threadhold to do a bulk push to upper tty layer when
+ * receiving bulk data, a much bigger buffer may cause stack overflow
+ */
+static void max3110_con_receive(struct uart_max3110 *max)
 {
 	int loop = 1, num, total = 0;
 	u8 recv_buf[512], *pbuf;
 
 	pbuf = recv_buf;
 	do {
-		num = max3110_read_multi(max, 8, pbuf);
+		num = max3110_read_multi(max, pbuf);
 
 		if (num) {
-			loop = 10;
+			loop = 5;
 			pbuf += num;
 			total += num;
 
-			if (total >= 500) {
+			if (total >= 504) {
 				receive_chars(max, recv_buf, total);
 				pbuf = recv_buf;
 				total = 0;
@@ -397,7 +430,7 @@ static int max3110_main_thread(void *_max)
 		mutex_lock(&max->thread_mutex);
 
 		if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
-			max3110_console_receive(max);
+			max3110_con_receive(max);
 
 		/* first handle console output */
 		if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
@@ -414,7 +447,6 @@ static int max3110_main_thread(void *_max)
 	return ret;
 }
 
-#ifdef CONFIG_MRST_MAX3110_IRQ
 static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
 {
 	struct uart_max3110 *max = dev_id;
@@ -426,7 +458,7 @@ static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
 
 	return IRQ_HANDLED;
 }
-#else
+
 /* if don't use RX IRQ, then need a thread to polling read */
 static int max3110_read_thread(void *_max)
 {
@@ -434,9 +466,14 @@ static int max3110_read_thread(void *_max)
 
 	pr_info(PR_FMT "start read thread\n");
 	do {
-		mutex_lock(&max->thread_mutex);
-		max3110_console_receive(max);
-		mutex_unlock(&max->thread_mutex);
+		/*
+		 * If can't acquire the mutex, it means the main thread
+		 * is running which will also perform the rx job
+		 */
+		if (mutex_trylock(&max->thread_mutex)) {
+			max3110_con_receive(max);
+			mutex_unlock(&max->thread_mutex);
+		}
 
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(HZ / 20);
@@ -444,7 +481,6 @@ static int max3110_read_thread(void *_max)
 
 	return 0;
 }
-#endif
 
 static int serial_m3110_startup(struct uart_port *port)
 {
@@ -453,33 +489,54 @@ static int serial_m3110_startup(struct uart_port *port)
 	u16 config = 0;
 	int ret = 0;
 
-	if (port->line != 0)
+	if (port->line != 0) {
 		pr_err(PR_FMT "uart port startup failed\n");
+		return -1;
+	}
 
-	/* firstly disable all IRQ and config it to 115200, 8n1 */
+	/* Disable all IRQ and config it to 115200, 8n1 */
 	config = WC_TAG | WC_FIFO_ENABLE
 			| WC_1_STOPBITS
 			| WC_8BIT_WORD
 			| WC_BAUD_DR2;
-	ret = max3110_out(max, config);
 
 	/* as we use thread to handle tx/rx, need set low latency */
 	port->state->port.tty->low_latency = 1;
 
-#ifdef CONFIG_MRST_MAX3110_IRQ
-	ret = request_irq(max->irq, serial_m3110_irq,
+	if (max->irq) {
+		max->read_thread = NULL;
+		ret = request_irq(max->irq, serial_m3110_irq,
 				IRQ_TYPE_EDGE_FALLING, "max3110", max);
-	if (ret)
-		return ret;
+		if (ret) {
+			max->irq = 0;
+			pr_err(PR_FMT "unable to allocate IRQ, polling\n");
+		}  else {
+			/* Enable RX IRQ only */
+			config |= WC_RXA_IRQ_ENABLE;
+		}
+	}
 
-	/* enable RX IRQ only */
-	config |= WC_RXA_IRQ_ENABLE;
-	max3110_out(max, config);
-#else
-	/* if IRQ is disabled, start a read thread for input data */
-	max->read_thread =
-		kthread_run(max3110_read_thread, max, "max3110_read");
-#endif
+	if (max->irq == 0) {
+		/* If IRQ is disabled, start a read thread for input data */
+		max->read_thread =
+			kthread_run(max3110_read_thread, max, "max3110_read");
+		if (IS_ERR(max->read_thread)) {
+			ret = PTR_ERR(max->read_thread);
+			max->read_thread = NULL;
+			pr_err(PR_FMT "Can't create read thread!\n");
+			return ret;
+		}
+	}
+
+	ret = max3110_out(max, config);
+	if (ret) {
+		if (max->irq)
+			free_irq(max->irq, max);
+		if (max->read_thread)
+			kthread_stop(max->read_thread);
+		max->read_thread = NULL;
+		return ret;
+	}
 
 	max->cur_conf = config;
 	return 0;
@@ -496,9 +553,8 @@ static void serial_m3110_shutdown(struct uart_port *port)
 		max->read_thread = NULL;
 	}
 
-#ifdef CONFIG_MRST_MAX3110_IRQ
-	free_irq(max->irq, max);
-#endif
+	if (max->irq)
+		free_irq(max->irq, max);
 
 	/* Disable interrupts from this port */
 	config = WC_TAG | WC_SW_SHDI;
@@ -516,8 +572,7 @@ static int serial_m3110_request_port(struct uart_port *port)
 
 static void serial_m3110_config_port(struct uart_port *port, int flags)
 {
-	/* give it fake type */
-	port->type = PORT_PXA;
+	port->type = PORT_MAX3100;
 }
 
 static int
@@ -552,6 +607,9 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
 		new_conf |= WC_7BIT_WORD;
 		break;
 	default:
+		/* We only support CS7 & CS8 */
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS8;
 	case CS8:
 		cval = UART_LCR_WLEN8;
 		new_conf |= WC_8BIT_WORD;
@@ -560,7 +618,7 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	baud = uart_get_baud_rate(port, termios, old, 0, 230400);
 
-	/* first calc the div for 1.8MHZ clock case */
+	/* First calc the div for 1.8MHZ clock case */
 	switch (baud) {
 	case 300:
 		clk_div = WC_BAUD_DR384;
@@ -596,7 +654,7 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
 		if (max->clock & MAX3110_HIGH_CLK)
 			break;
 	default:
-		/* pick the previous baud rate */
+		/* Pick the previous baud rate */
 		baud = max->baud;
 		clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
 		tty_termios_encode_baud_rate(termios, baud, baud);
@@ -604,15 +662,21 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	if (max->clock & MAX3110_HIGH_CLK) {
 		clk_div += 1;
-		/* high clk version max3110 doesn't support B300 */
-		if (baud == 300)
+		/* High clk version max3110 doesn't support B300 */
+		if (baud == 300) {
 			baud = 600;
+			clk_div = WC_BAUD_DR384;
+		}
 		if (baud == 230400)
 			clk_div = WC_BAUD_DR1;
 		tty_termios_encode_baud_rate(termios, baud, baud);
 	}
 
 	new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
+
+	if (unlikely(termios->c_cflag & CMSPAR))
+		termios->c_cflag &= ~CMSPAR;
+
 	if (termios->c_cflag & CSTOPB)
 		new_conf |= WC_2_STOPBITS;
 	else
@@ -632,13 +696,14 @@ serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	new_conf |= WC_TAG;
 	if (new_conf != max->cur_conf) {
-		max3110_out(max, new_conf);
-		max->cur_conf = new_conf;
-		max->baud = baud;
+		if (!max3110_out(max, new_conf)) {
+			max->cur_conf = new_conf;
+			max->baud = baud;
+		}
 	}
 }
 
-/* don't handle hw handshaking */
+/* Don't handle hw handshaking */
 static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
 {
 	return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
@@ -672,7 +737,7 @@ struct uart_ops serial_m3110_ops = {
 	.break_ctl	= serial_m3110_break_ctl,
 	.startup	= serial_m3110_startup,
 	.shutdown	= serial_m3110_shutdown,
-	.set_termios	= serial_m3110_set_termios,	/* must have */
+	.set_termios	= serial_m3110_set_termios,
 	.pm		= serial_m3110_pm,
 	.type		= serial_m3110_type,
 	.release_port	= serial_m3110_release_port,
@@ -688,52 +753,60 @@ static struct uart_driver serial_m3110_reg = {
 	.major		= TTY_MAJOR,
 	.minor		= 64,
 	.nr		= 1,
-	.cons		= MRST_CONSOLE,
+	.cons		= &serial_m3110_console,
 };
 
+#ifdef CONFIG_PM
 static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
 {
+	struct uart_max3110 *max = spi_get_drvdata(spi);
+
+	disable_irq(max->irq);
+	uart_suspend_port(&serial_m3110_reg, &max->port);
+	max3110_out(max, max->cur_conf | WC_SW_SHDI);
 	return 0;
 }
 
 static int serial_m3110_resume(struct spi_device *spi)
 {
+	struct uart_max3110 *max = spi_get_drvdata(spi);
+
+	max3110_out(max, max->cur_conf);
+	uart_resume_port(&serial_m3110_reg, &max->port);
+	enable_irq(max->irq);
 	return 0;
 }
+#else
+#define serial_m3110_suspend	NULL
+#define serial_m3110_resume	NULL
+#endif
 
-static struct dw_spi_chip spi0_uart = {
-	.poll_mode = 1,
-	.enable_dma = 0,
-	.type = SPI_FRF_SPI,
-};
-
-static int serial_m3110_probe(struct spi_device *spi)
+static int __devinit serial_m3110_probe(struct spi_device *spi)
 {
 	struct uart_max3110 *max;
-	int ret;
-	unsigned char *buffer;
+	void *buffer;
 	u16 res;
+	int ret = 0;
+
 	max = kzalloc(sizeof(*max), GFP_KERNEL);
 	if (!max)
 		return -ENOMEM;
 
-	/* set spi info */
-	spi->mode = SPI_MODE_0;
+	/* Set spi info */
 	spi->bits_per_word = 16;
 	max->clock = MAX3110_HIGH_CLK;
-	spi->controller_data = &spi0_uart;
 
 	spi_setup(spi);
 
-	max->port.type = PORT_PXA;	/* need apply for a max3110 type */
-	max->port.fifosize = 2;		/* only have 16b buffer */
+	max->port.type = PORT_MAX3100;
+	max->port.fifosize = 2;		/* Only have 16b buffer */
 	max->port.ops = &serial_m3110_ops;
 	max->port.line = 0;
 	max->port.dev = &spi->dev;
 	max->port.uartclk = 115200;
 
 	max->spi = spi;
-	max->name = spi->modalias;	/* use spi name as the name */
+	strcpy(max->name, spi->modalias);
 	max->irq = (u16)spi->irq;
 
 	mutex_init(&max->thread_mutex);
@@ -755,13 +828,15 @@ static int serial_m3110_probe(struct spi_device *spi)
 		ret = -ENODEV;
 		goto err_get_page;
 	}
-	buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
+
+	buffer = (void *)__get_free_page(GFP_KERNEL);
 	if (!buffer) {
 		ret = -ENOMEM;
 		goto err_get_page;
 	}
-	max->con_xmit.buf = (unsigned char *)buffer;
-	max->con_xmit.head = max->con_xmit.tail = 0;
+	max->con_xmit.buf = buffer;
+	max->con_xmit.head = 0;
+	max->con_xmit.tail = 0;
 
 	max->main_thread = kthread_run(max3110_main_thread,
 					max, "max3110_main");
@@ -770,8 +845,10 @@ static int serial_m3110_probe(struct spi_device *spi)
 		goto err_kthread;
 	}
 
+	spi_set_drvdata(spi, max);
 	pmax = max;
-	/* give membase a psudo value to pass serial_core's check */
+
+	/* Give membase a psudo value to pass serial_core's check */
 	max->port.membase = (void *)0xff110000;
 	uart_add_one_port(&serial_m3110_reg, &max->port);
 
@@ -780,19 +857,17 @@ static int serial_m3110_probe(struct spi_device *spi)
 err_kthread:
 	free_page((unsigned long)buffer);
 err_get_page:
-	pmax = NULL;
 	kfree(max);
 	return ret;
 }
 
-static int max3110_remove(struct spi_device *dev)
+static int __devexit serial_m3110_remove(struct spi_device *dev)
 {
-	struct uart_max3110 *max = pmax;
+	struct uart_max3110 *max = spi_get_drvdata(dev);
 
-	if (!pmax)
+	if (!max)
 		return 0;
 
-	pmax = NULL;
 	uart_remove_one_port(&serial_m3110_reg, &max->port);
 
 	free_page((unsigned long)max->con_xmit.buf);
@@ -811,13 +886,12 @@ static struct spi_driver uart_max3110_driver = {
 			.owner	= THIS_MODULE,
 	},
 	.probe		= serial_m3110_probe,
-	.remove		= __devexit_p(max3110_remove),
+	.remove		= __devexit_p(serial_m3110_remove),
 	.suspend	= serial_m3110_suspend,
 	.resume		= serial_m3110_resume,
 };
 
-
-int __init serial_m3110_init(void)
+static int __init serial_m3110_init(void)
 {
 	int ret = 0;
 
@@ -832,7 +906,7 @@ int __init serial_m3110_init(void)
 	return ret;
 }
 
-void __exit serial_m3110_exit(void)
+static void __exit serial_m3110_exit(void)
 {
 	spi_unregister_driver(&uart_max3110_driver);
 	uart_unregister_driver(&serial_m3110_reg);
@@ -841,5 +915,5 @@ void __exit serial_m3110_exit(void)
 module_init(serial_m3110_init);
 module_exit(serial_m3110_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("max3110-uart");

drivers/serial/mrst_max3110.h

@@ -56,4 +56,5 @@
 #define WC_BAUD_DR192		(0xE)
 #define WC_BAUD_DR384		(0xF)
 
+#define M3110_RX_FIFO_DEPTH	8
 #endif

drivers/serial/serial_core.c

@@ -1074,10 +1074,10 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
  * NB: both 1->0 and 0->1 transitions are counted except for
  *     RI where only 0->1 is counted.
  */
-static int uart_get_count(struct uart_state *state,
-			  struct serial_icounter_struct __user *icnt)
+static int uart_get_icount(struct tty_struct *tty,
+			  struct serial_icounter_struct *icount)
 {
-	struct serial_icounter_struct icount;
+	struct uart_state *state = tty->driver_data;
 	struct uart_icount cnow;
 	struct uart_port *uport = state->uart_port;
 
@@ -1085,19 +1085,19 @@ static int uart_get_count(struct uart_state *state,
 	memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
 	spin_unlock_irq(&uport->lock);
 
-	icount.cts         = cnow.cts;
-	icount.dsr         = cnow.dsr;
-	icount.rng         = cnow.rng;
-	icount.dcd         = cnow.dcd;
-	icount.rx          = cnow.rx;
-	icount.tx          = cnow.tx;
-	icount.frame       = cnow.frame;
-	icount.overrun     = cnow.overrun;
-	icount.parity      = cnow.parity;
-	icount.brk         = cnow.brk;
-	icount.buf_overrun = cnow.buf_overrun;
+	icount->cts         = cnow.cts;
+	icount->dsr         = cnow.dsr;
+	icount->rng         = cnow.rng;
+	icount->dcd         = cnow.dcd;
+	icount->rx          = cnow.rx;
+	icount->tx          = cnow.tx;
+	icount->frame       = cnow.frame;
+	icount->overrun     = cnow.overrun;
+	icount->parity      = cnow.parity;
+	icount->brk         = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
 
-	return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+	return 0;
 }
 
 /*
@@ -1150,10 +1150,6 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 	case TIOCMIWAIT:
 		ret = uart_wait_modem_status(state, arg);
 		break;
-
-	case TIOCGICOUNT:
-		ret = uart_get_count(state, uarg);
-		break;
 	}
 
 	if (ret != -ENOIOCTLCMD)
@@ -2065,7 +2061,19 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 	/*
 	 * Re-enable the console device after suspending.
 	 */
-	if (uart_console(uport)) {
+	if (console_suspend_enabled && uart_console(uport)) {
+		/*
+		 * First try to use the console cflag setting.
+		 */
+		memset(&termios, 0, sizeof(struct ktermios));
+		termios.c_cflag = uport->cons->cflag;
+
+		/*
+		 * If that's unset, use the tty termios setting.
+		 */
+		if (port->tty && port->tty->termios && termios.c_cflag == 0)
+			termios = *(port->tty->termios);
+
 		uart_change_pm(state, 0);
 		uport->ops->set_termios(uport, &termios, NULL);
 		console_start(uport->cons);
@@ -2283,6 +2291,7 @@ static const struct tty_operations uart_ops = {
 #endif
 	.tiocmget	= uart_tiocmget,
 	.tiocmset	= uart_tiocmset,
+	.get_icount	= uart_get_icount,
 #ifdef CONFIG_CONSOLE_POLL
 	.poll_init	= uart_poll_init,
 	.poll_get_char	= uart_poll_get_char,

drivers/serial/uartlite.c

@@ -322,6 +322,26 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return -EINVAL;
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int ulite_get_poll_char(struct uart_port *port)
+{
+	if (!(ioread32be(port->membase + ULITE_STATUS)
+						& ULITE_STATUS_RXVALID))
+		return NO_POLL_CHAR;
+
+	return ioread32be(port->membase + ULITE_RX);
+}
+
+static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
+{
+	while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL)
+		cpu_relax();
+
+	/* write char to device */
+	iowrite32be(ch, port->membase + ULITE_TX);
+}
+#endif
+
 static struct uart_ops ulite_ops = {
 	.tx_empty	= ulite_tx_empty,
 	.set_mctrl	= ulite_set_mctrl,
@@ -338,7 +358,11 @@ static struct uart_ops ulite_ops = {
 	.release_port	= ulite_release_port,
 	.request_port	= ulite_request_port,
 	.config_port	= ulite_config_port,
-	.verify_port	= ulite_verify_port
+	.verify_port	= ulite_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= ulite_get_poll_char,
+	.poll_put_char	= ulite_put_poll_char,
+#endif
 };
 
 /* ---------------------------------------------------------------------

drivers/usb/serial/ark3116.c

@@ -411,6 +411,26 @@ err_out:
 	return result;
 }
 
+static int ark3116_get_icount(struct tty_struct *tty,
+					struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	struct async_icount cnow = priv->icount;
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
 static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
@@ -460,25 +480,6 @@ static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
 				return 0;
 		}
 		break;
-	case TIOCGICOUNT: {
-		struct serial_icounter_struct icount;
-		struct async_icount cnow = priv->icount;
-		memset(&icount, 0, sizeof(icount));
-		icount.cts = cnow.cts;
-		icount.dsr = cnow.dsr;
-		icount.rng = cnow.rng;
-		icount.dcd = cnow.dcd;
-		icount.rx = cnow.rx;
-		icount.tx = cnow.tx;
-		icount.frame = cnow.frame;
-		icount.overrun = cnow.overrun;
-		icount.parity = cnow.parity;
-		icount.brk = cnow.brk;
-		icount.buf_overrun = cnow.buf_overrun;
-		if (copy_to_user(user_arg, &icount, sizeof(icount)))
-			return -EFAULT;
-		return 0;
-	}
 	}
 
 	return -ENOIOCTLCMD;
@@ -736,6 +737,7 @@ static struct usb_serial_driver ark3116_device = {
 	.ioctl =		ark3116_ioctl,
 	.tiocmget =		ark3116_tiocmget,
 	.tiocmset =		ark3116_tiocmset,
+	.get_icount =		ark3116_get_icount,
 	.open =			ark3116_open,
 	.close =		ark3116_close,
 	.break_ctl = 		ark3116_break_ctl,

drivers/usb/serial/ftdi_sio.c

@@ -2168,6 +2168,7 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 	 * - mask passed in arg for lines of interest
 	 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
 	 * Caller should use TIOCGICOUNT to see which one it was.
+	 * (except that the driver doesn't support it !)
 	 *
 	 * This code is borrowed from linux/drivers/char/serial.c
 	 */

drivers/usb/serial/io_edgeport.c

@@ -222,6 +222,8 @@ static void edge_break(struct tty_struct *tty, int break_state);
 static int  edge_tiocmget(struct tty_struct *tty, struct file *file);
 static int  edge_tiocmset(struct tty_struct *tty, struct file *file,
 					unsigned int set, unsigned int clear);
+static int  edge_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount);
 static int  edge_startup(struct usb_serial *serial);
 static void edge_disconnect(struct usb_serial *serial);
 static void edge_release(struct usb_serial *serial);
@@ -1624,6 +1626,31 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
+static int edge_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	struct async_icount cnow;
+	cnow = edge_port->icount;
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
+			__func__,  port->number, icount->rx, icount->tx);
+	return 0;
+}
+
 static int get_serial_info(struct edgeport_port *edge_port,
 				struct serial_struct __user *retinfo)
 {
@@ -1650,7 +1677,6 @@ static int get_serial_info(struct edgeport_port *edge_port,
 }
 
 
-
 /*****************************************************************************
  * SerialIoctl
  *	this function handles any ioctl calls to the driver
@@ -1663,7 +1689,6 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct async_icount cnow;
 	struct async_icount cprev;
-	struct serial_icounter_struct icount;
 
 	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
 
@@ -1702,26 +1727,6 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
 		/* NOTREACHED */
 		break;
 
-	case TIOCGICOUNT:
-		cnow = edge_port->icount;
-		memset(&icount, 0, sizeof(icount));
-		icount.cts = cnow.cts;
-		icount.dsr = cnow.dsr;
-		icount.rng = cnow.rng;
-		icount.dcd = cnow.dcd;
-		icount.rx = cnow.rx;
-		icount.tx = cnow.tx;
-		icount.frame = cnow.frame;
-		icount.overrun = cnow.overrun;
-		icount.parity = cnow.parity;
-		icount.brk = cnow.brk;
-		icount.buf_overrun = cnow.buf_overrun;
-
-		dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
-				__func__,  port->number, icount.rx, icount.tx);
-		if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
-			return -EFAULT;
-		return 0;
 	}
 	return -ENOIOCTLCMD;
 }

drivers/usb/serial/io_tables.h

@@ -123,6 +123,7 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
+	.get_icount		= edge_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
@@ -152,6 +153,7 @@ static struct usb_serial_driver edgeport_4port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
+	.get_icount		= edge_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
@@ -181,6 +183,7 @@ static struct usb_serial_driver edgeport_8port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
+	.get_icount		= edge_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
@@ -209,6 +212,7 @@ static struct usb_serial_driver epic_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
+	.get_icount		= edge_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,

drivers/usb/serial/io_ti.c

@@ -2510,6 +2510,27 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
+static int edge_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	struct async_icount *ic = &edge_port->icount;
+
+	icount->cts = ic->cts;
+	icount->dsr = ic->dsr;
+	icount->rng = ic->rng;
+	icount->dcd = ic->dcd;
+	icount->tx = ic->tx;
+        icount->rx = ic->rx;
+        icount->frame = ic->frame;
+        icount->parity = ic->parity;
+        icount->overrun = ic->overrun;
+        icount->brk = ic->brk;
+        icount->buf_overrun = ic->buf_overrun;
+	return 0;
+}
+
 static int get_serial_info(struct edgeport_port *edge_port,
 				struct serial_struct __user *retinfo)
 {
@@ -2572,13 +2593,6 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
 		}
 		/* not reached */
 		break;
-	case TIOCGICOUNT:
-		dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
-		     port->number, edge_port->icount.rx, edge_port->icount.tx);
-		if (copy_to_user((void __user *)arg, &edge_port->icount,
-				sizeof(edge_port->icount)))
-			return -EFAULT;
-		return 0;
 	}
 	return -ENOIOCTLCMD;
 }
@@ -2758,6 +2772,7 @@ static struct usb_serial_driver edgeport_1port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
+	.get_icount		= edge_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,

drivers/usb/serial/mos7720.c

@@ -1896,10 +1896,37 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
+static int mos7720_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port;
+	struct async_icount cnow;
+
+	mos7720_port = usb_get_serial_port_data(port);
+	cnow = mos7720_port->icount;
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
+		port->number, icount->rx, icount->tx);
+	return 0;
+}
+
 static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 			  unsigned int __user *value)
 {
-	unsigned int mcr ;
+	unsigned int mcr;
 	unsigned int arg;
 
 	struct usb_serial_port *port;
@@ -1973,7 +2000,6 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 	struct moschip_port *mos7720_port;
 	struct async_icount cnow;
 	struct async_icount cprev;
-	struct serial_icounter_struct icount;
 
 	mos7720_port = usb_get_serial_port_data(port);
 	if (mos7720_port == NULL)
@@ -2021,29 +2047,6 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 		}
 		/* NOTREACHED */
 		break;
-
-	case TIOCGICOUNT:
-		cnow = mos7720_port->icount;
-
-		memset(&icount, 0, sizeof(struct serial_icounter_struct));
-
-		icount.cts = cnow.cts;
-		icount.dsr = cnow.dsr;
-		icount.rng = cnow.rng;
-		icount.dcd = cnow.dcd;
-		icount.rx = cnow.rx;
-		icount.tx = cnow.tx;
-		icount.frame = cnow.frame;
-		icount.overrun = cnow.overrun;
-		icount.parity = cnow.parity;
-		icount.brk = cnow.brk;
-		icount.buf_overrun = cnow.buf_overrun;
-
-		dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
-		    port->number, icount.rx, icount.tx);
-		if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
-			return -EFAULT;
-		return 0;
 	}
 
 	return -ENOIOCTLCMD;
@@ -2212,6 +2215,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.ioctl			= mos7720_ioctl,
 	.tiocmget		= mos7720_tiocmget,
 	.tiocmset		= mos7720_tiocmset,
+	.get_icount		= mos7720_get_icount,
 	.set_termios		= mos7720_set_termios,
 	.write			= mos7720_write,
 	.write_room		= mos7720_write_room,

drivers/usb/serial/mos7840.c

@@ -2209,6 +2209,34 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
 	return 0;
 }
 
+static int mos7840_get_icount(struct tty_struct *tty,
+			struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7840_port;
+	struct async_icount cnow;
+
+	mos7840_port = mos7840_get_port_private(port);
+	cnow = mos7840_port->icount;
+
+	smp_rmb();
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
+		port->number, icount->rx, icount->tx);
+	return 0;
+}
+
 /*****************************************************************************
  * SerialIoctl
  *	this function handles any ioctl calls to the driver
@@ -2223,7 +2251,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 
 	struct async_icount cnow;
 	struct async_icount cprev;
-	struct serial_icounter_struct icount;
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port");
@@ -2282,29 +2309,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 		/* NOTREACHED */
 		break;
 
-	case TIOCGICOUNT:
-		cnow = mos7840_port->icount;
-		smp_rmb();
-
-		memset(&icount, 0, sizeof(struct serial_icounter_struct));
-
-		icount.cts = cnow.cts;
-		icount.dsr = cnow.dsr;
-		icount.rng = cnow.rng;
-		icount.dcd = cnow.dcd;
-		icount.rx = cnow.rx;
-		icount.tx = cnow.tx;
-		icount.frame = cnow.frame;
-		icount.overrun = cnow.overrun;
-		icount.parity = cnow.parity;
-		icount.brk = cnow.brk;
-		icount.buf_overrun = cnow.buf_overrun;
-
-		dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
-		    port->number, icount.rx, icount.tx);
-		if (copy_to_user(argp, &icount, sizeof(icount)))
-			return -EFAULT;
-		return 0;
 	default:
 		break;
 	}
@@ -2674,6 +2678,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.break_ctl = mos7840_break,
 	.tiocmget = mos7840_tiocmget,
 	.tiocmset = mos7840_tiocmset,
+	.get_icount = mos7840_get_icount,
 	.attach = mos7840_startup,
 	.disconnect = mos7840_disconnect,
 	.release = mos7840_release,

drivers/usb/serial/ssu100.c

@@ -416,12 +416,34 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
+static int ssu100_get_icount(struct tty_struct *tty,
+			struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	struct async_icount cnow = priv->icount;
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
+
+
 static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
-	void __user *user_arg = (void __user *)arg;
 
 	dbg("%s cmd 0x%04x", __func__, cmd);
 
@@ -433,27 +455,6 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
 	case TIOCMIWAIT:
 		return wait_modem_info(port, arg);
 
-	case TIOCGICOUNT:
-	{
-		struct serial_icounter_struct icount;
-		struct async_icount cnow = priv->icount;
-		memset(&icount, 0, sizeof(icount));
-		icount.cts = cnow.cts;
-		icount.dsr = cnow.dsr;
-		icount.rng = cnow.rng;
-		icount.dcd = cnow.dcd;
-		icount.rx = cnow.rx;
-		icount.tx = cnow.tx;
-		icount.frame = cnow.frame;
-		icount.overrun = cnow.overrun;
-		icount.parity = cnow.parity;
-		icount.brk = cnow.brk;
-		icount.buf_overrun = cnow.buf_overrun;
-		if (copy_to_user(user_arg, &icount, sizeof(icount)))
-			return -EFAULT;
-		return 0;
-	}
-
 	default:
 		break;
 	}
@@ -726,6 +727,7 @@ static struct usb_serial_driver ssu100_device = {
 	.process_read_urb    = ssu100_process_read_urb,
 	.tiocmget            = ssu100_tiocmget,
 	.tiocmset            = ssu100_tiocmset,
+	.get_icount	     = ssu100_get_icount,
 	.ioctl               = ssu100_ioctl,
 	.set_termios         = ssu100_set_termios,
 	.disconnect          = usb_serial_generic_disconnect,

drivers/usb/serial/ti_usb_3410_5052.c

@@ -108,6 +108,8 @@ static void ti_throttle(struct tty_struct *tty);
 static void ti_unthrottle(struct tty_struct *tty);
 static int ti_ioctl(struct tty_struct *tty, struct file *file,
 		unsigned int cmd, unsigned long arg);
+static int ti_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount);
 static void ti_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
 static int ti_tiocmget(struct tty_struct *tty, struct file *file);
@@ -237,6 +239,7 @@ static struct usb_serial_driver ti_1port_device = {
 	.set_termios		= ti_set_termios,
 	.tiocmget		= ti_tiocmget,
 	.tiocmset		= ti_tiocmset,
+	.get_icount		= ti_get_icount,
 	.break_ctl		= ti_break,
 	.read_int_callback	= ti_interrupt_callback,
 	.read_bulk_callback	= ti_bulk_in_callback,
@@ -265,6 +268,7 @@ static struct usb_serial_driver ti_2port_device = {
 	.set_termios		= ti_set_termios,
 	.tiocmget		= ti_tiocmget,
 	.tiocmset		= ti_tiocmset,
+	.get_icount		= ti_get_icount,
 	.break_ctl		= ti_break,
 	.read_int_callback	= ti_interrupt_callback,
 	.read_bulk_callback	= ti_bulk_in_callback,
@@ -788,6 +792,31 @@ static void ti_unthrottle(struct tty_struct *tty)
 	}
 }
 
+static int ti_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ti_port *tport = usb_get_serial_port_data(port);
+	struct async_icount cnow = tport->tp_icount;
+
+	dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
+		__func__, port->number,
+		cnow.rx, cnow.tx);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
 
 static int ti_ioctl(struct tty_struct *tty, struct file *file,
 	unsigned int cmd, unsigned long arg)
@@ -830,14 +859,6 @@ static int ti_ioctl(struct tty_struct *tty, struct file *file,
 			cprev = cnow;
 		}
 		break;
-	case TIOCGICOUNT:
-		dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
-				__func__, port->number,
-				tport->tp_icount.rx, tport->tp_icount.tx);
-		if (copy_to_user((void __user *)arg, &tport->tp_icount,
-					sizeof(tport->tp_icount)))
-			return -EFAULT;
-		return 0;
 	}
 	return -ENOIOCTLCMD;
 }

drivers/usb/serial/usb-serial.c

@@ -519,6 +519,18 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
 	return -EINVAL;
 }
 
+static int serial_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	if (port->serial->type->get_icount)
+		return port->serial->type->get_icount(tty, icount);
+	return -EINVAL;
+}
+
 /*
  * We would be calling tty_wakeup here, but unfortunately some line
  * disciplines have an annoying habit of calling tty->write from
@@ -1195,6 +1207,7 @@ static const struct tty_operations serial_ops = {
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
+	.get_icount = 		serial_get_icount,
 	.cleanup = 		serial_cleanup,
 	.install = 		serial_install,
 	.proc_fops =		&serial_proc_fops,

fs/proc/proc_tty.c

@@ -12,7 +12,10 @@
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
 #include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/console.h>
 #include <linux/seq_file.h>
+#include <linux/fdtable.h>
 #include <linux/bitops.h>
 
 /*
@@ -136,6 +139,160 @@ static const struct file_operations proc_tty_drivers_operations = {
 	.release	= seq_release,
 };
 
+/*
+ * The device ID of file descriptor 0 of the current reading
+ * task if a character device...
+ */
+static dev_t current_dev;
+
+/*
+ * This is the handler for /proc/tty/consoles
+ */
+static int show_console_dev(struct seq_file *m, void *v)
+{
+	const struct tty_driver *driver;
+	struct console *con;
+	int index, len;
+	char flags[10];
+	dev_t dev;
+
+	if (v == SEQ_START_TOKEN)
+		return 0;
+	con = (struct console *)v;
+	if (!con)
+		return 0;
+	driver = con->device(con, &index);
+	if (!driver)
+		return 0;
+	dev = MKDEV(driver->major, driver->minor_start) + index;
+
+	index = 0;
+	if (con->flags & CON_ENABLED)
+		flags[index++] = 'E';
+	if (con->flags & CON_CONSDEV)
+		flags[index++] = 'C';
+	if (con->flags & CON_BOOT)
+		flags[index++] = 'B';
+	if (con->flags & CON_PRINTBUFFER)
+		flags[index++] = 'p';
+	if (con->flags & CON_BRL)
+		flags[index++] = 'b';
+	if (con->flags & CON_ANYTIME)
+		flags[index++] = 'a';
+	if (current_dev == dev)
+		flags[index++] = '*';
+	flags[index] = 0;
+
+	seq_printf(m, "%s%d%n", con->name, con->index, &len);
+	len = 21 - len;
+	if (len < 1)
+		len = 1;
+	seq_printf(m, "%*c", len, ' ');
+	seq_printf(m, "%c%c%c (%s)%n", con->read ? 'R' : '-',
+			con->write ? 'W' : '-', con->unblank ? 'U' : '-',
+			flags, &len);
+	len = 13 - len;
+	if (len < 1)
+		len = 1;
+	seq_printf(m, "%*c%4d:%d\n", len, ' ', MAJOR(dev), MINOR(dev));
+
+	return 0;
+}
+
+/* iterator for consoles */
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	struct console *con;
+	loff_t off = 0;
+
+	if (*pos == 0)
+		return SEQ_START_TOKEN;
+
+	acquire_console_sem();
+	for (con = console_drivers; con; con = con->next) {
+		if (!con->device)
+			continue;
+		if (++off == *pos)
+			break;
+	}
+	release_console_sem();
+
+	return con;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	struct console *con;
+
+	acquire_console_sem();
+	if (v == SEQ_START_TOKEN)
+		con = console_drivers;
+	else
+		con = ((struct console *)v)->next;
+	for (; con; con = con->next) {
+		if (!con->device)
+			continue;
+		++*pos;
+		break;
+	}
+	release_console_sem();
+
+	return con;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+static const struct seq_operations tty_consoles_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_console_dev
+};
+
+/*
+ * Used for open /proc/tty/consoles. Before this detect
+ * the device ID of file descriptor 0 of the current
+ * reading task if a character device...
+ */
+static int tty_consoles_open(struct inode *inode, struct file *file)
+{
+	struct files_struct *curfiles;
+
+	current_dev = 0;
+	curfiles = get_files_struct(current);
+	if (curfiles) {
+		const struct file *curfp;
+		spin_lock(&curfiles->file_lock);
+		curfp = fcheck_files(curfiles, 0);
+		if (curfp && curfp->private_data) {
+			const struct inode *inode;
+			dget(curfp->f_dentry);
+			inode = curfp->f_dentry->d_inode;
+			if (S_ISCHR(inode->i_mode)) {
+				struct tty_struct *tty;
+				tty = (struct tty_struct *)curfp->private_data;
+				if (tty && tty->magic == TTY_MAGIC) {
+					tty = tty_pair_get_tty(tty);
+					current_dev = tty_devnum(tty);
+				}
+			}
+			dput(curfp->f_dentry);
+		}
+		spin_unlock(&curfiles->file_lock);
+		put_files_struct(curfiles);
+	}
+	return seq_open(file, &tty_consoles_op);
+}
+
+static const struct file_operations proc_tty_consoles_operations = {
+	.open		= tty_consoles_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
 /*
  * This function is called by tty_register_driver() to handle
  * registering the driver's /proc handler into /proc/tty/driver/<foo>
@@ -186,4 +343,5 @@ void __init proc_tty_init(void)
 	proc_tty_driver = proc_mkdir_mode("tty/driver", S_IRUSR|S_IXUSR, NULL);
 	proc_create("tty/ldiscs", 0, NULL, &tty_ldiscs_proc_fops);
 	proc_create("tty/drivers", 0, NULL, &proc_tty_drivers_operations);
+	proc_create("tty/consoles", 0, NULL, &proc_tty_consoles_operations);
 }

include/asm-generic/ioctls.h

@@ -62,7 +62,9 @@
 #define TCSETSW2	_IOW('T', 0x2C, struct termios2)
 #define TCSETSF2	_IOW('T', 0x2D, struct termios2)
 #define TIOCGRS485	0x542E
+#ifndef TIOCSRS485
 #define TIOCSRS485	0x542F
+#endif
 #define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
 #define TCGETX		0x5432 /* SYS5 TCGETX compatibility */

include/linux/altera_uart.h

@@ -5,10 +5,15 @@
 #ifndef	__ALTUART_H
 #define	__ALTUART_H
 
+#include <linux/init.h>
+
 struct altera_uart_platform_uart {
 	unsigned long mapbase;	/* Physical address base */
 	unsigned int irq;	/* Interrupt vector */
 	unsigned int uartclk;	/* UART clock rate */
+	unsigned int bus_shift;	/* Bus shift (address stride) */
 };
 
+int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp);
+
 #endif /* __ALTUART_H */

include/linux/selection.h

@@ -39,5 +39,6 @@ extern void putconsxy(struct vc_data *vc, unsigned char *p);
 
 extern u16 vcs_scr_readw(struct vc_data *vc, const u16 *org);
 extern void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
+extern void vcs_scr_updated(struct vc_data *vc);
 
 #endif

include/linux/serial_8250.h

@@ -35,6 +35,8 @@ struct plat_serial8250_port {
 	void		(*set_termios)(struct uart_port *,
 			               struct ktermios *new,
 			               struct ktermios *old);
+	void		(*pm)(struct uart_port *, unsigned int state,
+			      unsigned old);
 };
 
 /*
@@ -76,5 +78,11 @@ extern int serial8250_find_port_for_earlycon(void);
 extern int setup_early_serial8250_console(char *cmdline);
 extern void serial8250_do_set_termios(struct uart_port *port,
 		struct ktermios *termios, struct ktermios *old);
+extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
+			     unsigned int oldstate);
+
+extern void serial8250_set_isa_configurator(void (*v)
+					(int port, struct uart_port *up,
+						unsigned short *capabilities));
 
 #endif

include/linux/serial_core.h

@@ -289,6 +289,8 @@ struct uart_port {
 	void			(*set_termios)(struct uart_port *,
 				               struct ktermios *new,
 				               struct ktermios *old);
+	void			(*pm)(struct uart_port *, unsigned int state,
+				      unsigned int old);
 	unsigned int		irq;			/* irq number */
 	unsigned long		irqflags;		/* irq flags  */
 	unsigned int		uartclk;		/* base uart clock */
@@ -411,6 +413,14 @@ unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios
 				unsigned int max);
 unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
 
+/* Base timer interval for polling */
+static inline int uart_poll_timeout(struct uart_port *port)
+{
+	int timeout = port->timeout;
+
+	return timeout > 6 ? (timeout / 2 - 2) : 1;
+}
+
 /*
  * Console helpers.
  */

include/linux/tty.h

@@ -256,6 +256,7 @@ struct tty_operations;
 struct tty_struct {
 	int	magic;
 	struct kref kref;
+	struct device *dev;
 	struct tty_driver *driver;
 	const struct tty_operations *ops;
 	int index;
@@ -465,7 +466,7 @@ extern void proc_clear_tty(struct task_struct *p);
 extern struct tty_struct *get_current_tty(void);
 extern void tty_default_fops(struct file_operations *fops);
 extern struct tty_struct *alloc_tty_struct(void);
-extern void tty_add_file(struct tty_struct *tty, struct file *file);
+extern int tty_add_file(struct tty_struct *tty, struct file *file);
 extern void free_tty_struct(struct tty_struct *tty);
 extern void initialize_tty_struct(struct tty_struct *tty,
 		struct tty_driver *driver, int idx);

include/linux/tty_driver.h

@@ -224,6 +224,12 @@
  *	unless the tty also has a valid tty->termiox pointer.
  *
  *	Optional: Called under the termios lock
+ *
+ * int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount);
+ *
+ *	Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
+ *	structure to complete. This method is optional and will only be called
+ *	if provided (otherwise EINVAL will be returned).
  */
 
 #include <linux/fs.h>
@@ -232,6 +238,7 @@
 
 struct tty_struct;
 struct tty_driver;
+struct serial_icounter_struct;
 
 struct tty_operations {
 	struct tty_struct * (*lookup)(struct tty_driver *driver,
@@ -268,6 +275,8 @@ struct tty_operations {
 			unsigned int set, unsigned int clear);
 	int (*resize)(struct tty_struct *tty, struct winsize *ws);
 	int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
+	int (*get_icount)(struct tty_struct *tty,
+				struct serial_icounter_struct *icount);
 #ifdef CONFIG_CONSOLE_POLL
 	int (*poll_init)(struct tty_driver *driver, int line, char *options);
 	int (*poll_get_char)(struct tty_driver *driver, int line);

include/linux/usb/serial.h

@@ -271,6 +271,8 @@ struct usb_serial_driver {
 	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
+	int  (*get_icount)(struct tty_struct *tty,
+			struct serial_icounter_struct *icount);
 	/* Called by the tty layer for port level work. There may or may not
 	   be an attached tty at this point */
 	void (*dtr_rts)(struct usb_serial_port *port, int on);

net/bluetooth/rfcomm/tty.c

@@ -844,10 +844,6 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, struct file *filp, unsigned
 		BT_DBG("TIOCMIWAIT");
 		break;
 
-	case TIOCGICOUNT:
-		BT_DBG("TIOCGICOUNT");
-		break;
-
 	case TIOCGSERIAL:
 		BT_ERR("TIOCGSERIAL is not supported");
 		return -ENOIOCTLCMD;