Merge branch 'next-s5p' into for-next-new

arch/arm/mach-s5p6442/include/mach/map.h

@@ -28,6 +28,9 @@
 #define S5P6442_PA_VIC1		(0xE4100000)
 #define S5P6442_PA_VIC2		(0xE4200000)
 
+#define S5P6442_PA_SROMC	(0xE7000000)
+#define S5P_PA_SROMC		S5P6442_PA_SROMC
+
 #define S5P6442_PA_MDMA		0xE8000000
 #define S5P6442_PA_PDMA		0xE9000000
 

arch/arm/mach-s5p64x0/include/mach/map.h

@@ -29,6 +29,9 @@
 #define S5P64X0_PA_VIC0		(0xE4000000)
 #define S5P64X0_PA_VIC1		(0xE4100000)
 
+#define S5P64X0_PA_SROMC	(0xE7000000)
+#define S5P_PA_SROMC		S5P64X0_PA_SROMC
+
 #define S5P64X0_PA_PDMA		(0xE9000000)
 
 #define S5P64X0_PA_TIMER	(0xEA000000)

arch/arm/mach-s5pc100/include/mach/map.h

@@ -55,6 +55,8 @@
 #define S5PC100_VA_VIC_OFFSET	0x10000
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
 
+#define S5PC100_PA_SROMC	(0xE7000000)
+#define S5P_PA_SROMC		S5PC100_PA_SROMC
 
 #define S5PC100_PA_ONENAND	(0xE7100000)
 

arch/arm/mach-s5pv210/clock.c

@@ -525,6 +525,12 @@ static struct clk init_clocks[] = {
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 26),
 	},
 };
 

arch/arm/mach-s5pv210/cpu.c

@@ -80,11 +80,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C_PA_UART),
 		.length		= SZ_512K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_DMC0,
 		.pfn		= __phys_to_pfn(S5PV210_PA_DMC0),

arch/arm/mach-s5pv210/include/mach/irqs.h

@@ -65,7 +65,7 @@
 #define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
 #define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
 #define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
-#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
+#define IRQ_MIPI_CSIS		S5P_IRQ_VIC1(29)
 #define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
 #define IRQ_ONENAND_AUDI	S5P_IRQ_VIC1(31)
 
@@ -132,5 +132,6 @@
 #define IRQ_LCD_FIFO		IRQ_LCD0
 #define IRQ_LCD_VSYNC		IRQ_LCD1
 #define IRQ_LCD_SYSTEM		IRQ_LCD2
+#define IRQ_MIPI_CSIS0		IRQ_MIPI_CSIS
 
 #endif /* ASM_ARCH_IRQS_H */

arch/arm/mach-s5pv210/include/mach/map.h

@@ -16,6 +16,8 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
+#define S5PV210_PA_SROM_BANK5	(0xA8000000)
+
 #define S5PC110_PA_ONENAND	(0xB0000000)
 #define S5P_PA_ONENAND		S5PC110_PA_ONENAND
 
@@ -60,6 +62,7 @@
 #define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
 #define S5PV210_PA_SROMC	(0xE8000000)
+#define S5P_PA_SROMC		S5PV210_PA_SROMC
 
 #define S5PV210_PA_CFCON	(0xE8200000)
 
@@ -107,6 +110,8 @@
 #define S5PV210_PA_DMC0		(0xF0000000)
 #define S5PV210_PA_DMC1		(0xF1400000)
 
+#define S5PV210_PA_MIPI_CSIS	0xFA600000
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5PV210_PA_UART
 #define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
@@ -123,6 +128,7 @@
 #define S5P_PA_FIMC0		S5PV210_PA_FIMC0
 #define S5P_PA_FIMC1		S5PV210_PA_FIMC1
 #define S5P_PA_FIMC2		S5PV210_PA_FIMC2
+#define S5P_PA_MIPI_CSIS0	S5PV210_PA_MIPI_CSIS
 
 #define SAMSUNG_PA_ADC		S5PV210_PA_ADC
 #define SAMSUNG_PA_CFCON	S5PV210_PA_CFCON

arch/arm/mach-s5pv210/include/mach/regs-clock.h

@@ -161,7 +161,7 @@
 #define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
 #define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
 #define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
-#define S5P_MIPI_CONTROL	S5P_CLKREG(0xE814)
+#define S5P_MIPI_DPHY_CONTROL	S5P_CLKREG(0xE814)
 
 #define S5P_IDLE_CFG_TL_MASK	(3 << 30)
 #define S5P_IDLE_CFG_TM_MASK	(3 << 28)
@@ -195,9 +195,6 @@
 #define S5P_OTHERS_RET_UART		(1 << 28)
 #define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
 
-/* MIPI */
-#define S5P_MIPI_DPHY_EN		(3)
-
 /* S5P_DAC_CONTROL */
 #define S5P_DAC_ENABLE			(1)
 #define S5P_DAC_DISABLE			(0)

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -14,6 +14,8 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -24,6 +26,8 @@
 #include <mach/regs-clock.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
+#include <plat/gpio-cfg.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -102,6 +106,39 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
 	.cols		= 8,
 };
 
+static struct resource smdkv210_dm9000_resources[] = {
+	[0] = {
+		.start	= S5PV210_PA_SROM_BANK5,
+		.end	= S5PV210_PA_SROM_BANK5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S5PV210_PA_SROM_BANK5 + 2,
+		.end	= S5PV210_PA_SROM_BANK5 + 2,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_EINT(9),
+		.end	= IRQ_EINT(9),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct dm9000_plat_data smdkv210_dm9000_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
+	.dev_addr	= { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
+};
+
+struct platform_device smdkv210_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smdkv210_dm9000_resources),
+	.resource	= smdkv210_dm9000_resources,
+	.dev		= {
+		.platform_data	= &smdkv210_dm9000_platdata,
+	},
+};
+
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
@@ -119,8 +156,26 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_wdt,
+	&smdkv210_dm9000,
 };
 
+static void __init smdkv210_dm9000_init(void)
+{
+	unsigned int tmp;
+
+	gpio_request(S5PV210_MP01(5), "nCS5");
+	s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
+	gpio_free(S5PV210_MP01(5));
+
+	tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
+	__raw_writel(tmp, S5P_SROM_BC5);
+
+	tmp = __raw_readl(S5P_SROM_BW);
+	tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
+	tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT);
+	__raw_writel(tmp, S5P_SROM_BW);
+}
+
 static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
@@ -151,6 +206,8 @@ static void __init smdkv210_machine_init(void)
 {
 	s3c_pm_init();
 
+	smdkv210_dm9000_init();
+
 	samsung_keypad_set_platdata(&smdkv210_keypad_data);
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 

arch/arm/mach-s5pv310/include/mach/irqs.h

@@ -86,6 +86,9 @@
 #define IRQ_HSMMC2		COMBINER_IRQ(29, 2)
 #define IRQ_HSMMC3		COMBINER_IRQ(29, 3)
 
+#define IRQ_MIPI_CSIS0		COMBINER_IRQ(30, 0)
+#define IRQ_MIPI_CSIS1		COMBINER_IRQ(30, 1)
+
 #define IRQ_ONENAND_AUDI	COMBINER_IRQ(34, 0)
 
 #define IRQ_EINT4		COMBINER_IRQ(37, 0)

arch/arm/mach-s5pv310/include/mach/map.h

@@ -61,9 +61,13 @@
 #define S5PV310_PA_GPIO2		(0x11000000)
 #define S5PV310_PA_GPIO3		(0x03860000)
 
+#define S5PV310_PA_MIPI_CSIS0		0x11880000
+#define S5PV310_PA_MIPI_CSIS1		0x11890000
+
 #define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 
 #define S5PV310_PA_SROMC		(0x12570000)
+#define S5P_PA_SROMC			S5PV310_PA_SROMC
 
 /* S/PDIF */
 #define S5PV310_PA_SPDIF	0xE1100000
@@ -116,5 +120,7 @@
 #define S3C_PA_IIC7			S5PV310_PA_IIC(7)
 #define S3C_PA_RTC			S5PV310_PA_RTC
 #define S3C_PA_WDT			S5PV310_PA_WATCHDOG
+#define S5P_PA_MIPI_CSIS0		S5PV310_PA_MIPI_CSIS0
+#define S5P_PA_MIPI_CSIS1		S5PV310_PA_MIPI_CSIS1
 
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s5pv310/include/mach/regs-srom.h

@@ -1,50 +0,0 @@
-/* linux/arch/arm/mach-s5pv310/include/mach/regs-srom.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5PV310 - SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_SROM_H
-#define __ASM_ARCH_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5PV310_SROMREG(x)	(S5P_VA_SROMC + (x))
-
-#define S5PV310_SROM_BW		S5PV310_SROMREG(0x0)
-#define S5PV310_SROM_BC0	S5PV310_SROMREG(0x4)
-#define S5PV310_SROM_BC1	S5PV310_SROMREG(0x8)
-#define S5PV310_SROM_BC2	S5PV310_SROMREG(0xc)
-#define S5PV310_SROM_BC3	S5PV310_SROMREG(0x10)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5PV310_SROM_BW__DATAWIDTH__SHIFT	0
-#define S5PV310_SROM_BW__ADDRMODE__SHIFT	1
-#define S5PV310_SROM_BW__WAITENABLE__SHIFT	2
-#define S5PV310_SROM_BW__BYTEENABLE__SHIFT	3
-
-#define S5PV310_SROM_BW__CS_MASK		0xf
-
-#define S5PV310_SROM_BW__NCS0__SHIFT		0
-#define S5PV310_SROM_BW__NCS1__SHIFT		4
-#define S5PV310_SROM_BW__NCS2__SHIFT		8
-#define S5PV310_SROM_BW__NCS3__SHIFT		12
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5PV310_SROM_BCX__PMC__SHIFT		0
-#define S5PV310_SROM_BCX__TACP__SHIFT		4
-#define S5PV310_SROM_BCX__TCAH__SHIFT		8
-#define S5PV310_SROM_BCX__TCOH__SHIFT		12
-#define S5PV310_SROM_BCX__TACC__SHIFT		16
-#define S5PV310_SROM_BCX__TCOS__SHIFT		24
-#define S5PV310_SROM_BCX__TACS__SHIFT		28
-
-#endif /* __ASM_ARCH_REGS_SROM_H */

arch/arm/mach-s5pv310/mach-smdkc210.c

@@ -20,6 +20,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
 #include <plat/s5pv310.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -27,7 +28,6 @@
 #include <plat/iic.h>
 
 #include <mach/map.h>
-#include <mach/regs-srom.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKC210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -163,23 +163,22 @@ static void __init smdkc210_smsc911x_init(void)
 	u32 cs1;
 
 	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5PV310_SROM_BW) &
-		    ~(S5PV310_SROM_BW__CS_MASK <<
-				    S5PV310_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5PV310_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5PV310_SROM_BW);
+	cs1 = __raw_readl(S5P_SROM_BW) &
+		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
+		S5P_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S5P_SROM_BW);
 
 	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
+		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
+		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
+		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
 }
 
 static void __init smdkc210_map_io(void)

arch/arm/mach-s5pv310/mach-smdkv310.c

@@ -20,6 +20,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
 #include <plat/s5pv310.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -27,7 +28,6 @@
 #include <plat/iic.h>
 
 #include <mach/map.h>
-#include <mach/regs-srom.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -163,23 +163,22 @@ static void __init smdkv310_smsc911x_init(void)
 	u32 cs1;
 
 	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5PV310_SROM_BW) &
-		    ~(S5PV310_SROM_BW__CS_MASK <<
-				    S5PV310_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5PV310_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5PV310_SROM_BW);
+	cs1 = __raw_readl(S5P_SROM_BW) &
+		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
+		S5P_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S5P_SROM_BW);
 
 	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
+		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
+		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
+		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
 }
 
 static void __init smdkv310_map_io(void)

arch/arm/plat-s5p/Kconfig

@@ -56,3 +56,13 @@ config S5P_DEV_ONENAND
 	bool
 	help
 	  Compile in platform device definition for OneNAND controller
+
+config S5P_DEV_CSIS0
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 0
+
+config S5P_DEV_CSIS1
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 1

arch/arm/plat-s5p/Makefile

@@ -28,3 +28,5 @@ obj-$(CONFIG_S5P_DEV_FIMC0)	+= dev-fimc0.o
 obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
 obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
 obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
+obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
+obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o

arch/arm/plat-s5p/cpu.c

@@ -108,6 +108,11 @@ static struct map_desc s5p_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C_PA_WDT),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5P_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	},
 };
 

arch/arm/plat-s5p/dev-csis0.c

@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * S5P series device definition for MIPI-CSIS channel 0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+
+static struct resource s5p_mipi_csis0_resource[] = {
+	[0] = {
+		.start = S5P_PA_MIPI_CSIS0,
+		.end   = S5P_PA_MIPI_CSIS0 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_MIPI_CSIS0,
+		.end   = IRQ_MIPI_CSIS0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device s5p_device_mipi_csis0 = {
+	.name		  = "s5p-mipi-csis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p_mipi_csis0_resource),
+	.resource	  = s5p_mipi_csis0_resource,
+};

arch/arm/plat-s5p/dev-csis1.c

@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * S5P series device definition for MIPI-CSIS channel 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+
+static struct resource s5p_mipi_csis1_resource[] = {
+	[0] = {
+		.start = S5P_PA_MIPI_CSIS1,
+		.end   = S5P_PA_MIPI_CSIS1 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_MIPI_CSIS1,
+		.end   = IRQ_MIPI_CSIS1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_mipi_csis1 = {
+	.name		  = "s5p-mipi-csis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5p_mipi_csis1_resource),
+	.resource	  = s5p_mipi_csis1_resource,
+};

arch/arm/plat-s5p/include/plat/csis.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * S5P series MIPI CSI slave device support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_CSIS_H_
+#define PLAT_S5P_CSIS_H_ __FILE__
+
+/**
+ * struct s5p_platform_mipi_csis - platform data for MIPI-CSIS
+ * @clk_rate: bus clock frequency
+ * @lanes: number of data lanes used
+ * @alignment: data alignment in bits
+ * @hs_settle: HS-RX settle time
+ */
+struct s5p_platform_mipi_csis {
+	unsigned long clk_rate;
+	u8 lanes;
+	u8 alignment;
+	u8 hs_settle;
+};
+
+#endif /* PLAT_S5P_CSIS_H_ */

arch/arm/plat-s5p/include/plat/regs-srom.h

@@ -0,0 +1,54 @@
+/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_REGS_SROM_H
+#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SROMREG(x)		(S5P_VA_SROMC + (x))
+
+#define S5P_SROM_BW		S5P_SROMREG(0x0)
+#define S5P_SROM_BC0		S5P_SROMREG(0x4)
+#define S5P_SROM_BC1		S5P_SROMREG(0x8)
+#define S5P_SROM_BC2		S5P_SROMREG(0xc)
+#define S5P_SROM_BC3		S5P_SROMREG(0x10)
+#define S5P_SROM_BC4		S5P_SROMREG(0x14)
+#define S5P_SROM_BC5		S5P_SROMREG(0x18)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define S5P_SROM_BW__DATAWIDTH__SHIFT		0
+#define S5P_SROM_BW__ADDRMODE__SHIFT		1
+#define S5P_SROM_BW__WAITENABLE__SHIFT		2
+#define S5P_SROM_BW__BYTEENABLE__SHIFT		3
+
+#define S5P_SROM_BW__CS_MASK			0xf
+
+#define S5P_SROM_BW__NCS0__SHIFT		0
+#define S5P_SROM_BW__NCS1__SHIFT		4
+#define S5P_SROM_BW__NCS2__SHIFT		8
+#define S5P_SROM_BW__NCS3__SHIFT		12
+#define S5P_SROM_BW__NCS4__SHIFT		16
+#define S5P_SROM_BW__NCS5__SHIFT		20
+
+/* applies to same to BCS0 - BCS3 */
+
+#define S5P_SROM_BCX__PMC__SHIFT		0
+#define S5P_SROM_BCX__TACP__SHIFT		4
+#define S5P_SROM_BCX__TCAH__SHIFT		8
+#define S5P_SROM_BCX__TCOH__SHIFT		12
+#define S5P_SROM_BCX__TACC__SHIFT		16
+#define S5P_SROM_BCX__TCOS__SHIFT		24
+#define S5P_SROM_BCX__TACS__SHIFT		28
+
+#endif /* __ASM_PLAT_S5P_REGS_SROM_H */

arch/arm/plat-samsung/include/plat/devs.h

@@ -133,6 +133,9 @@ extern struct platform_device s5p_device_fimc0;
 extern struct platform_device s5p_device_fimc1;
 extern struct platform_device s5p_device_fimc2;
 
+extern struct platform_device s5p_device_mipi_csis0;
+extern struct platform_device s5p_device_mipi_csis1;
+
 /* s3c2440 specific devices */
 
 #ifdef CONFIG_CPU_S3C2440