Merge branches 'tracing/ftrace', 'tracing/syscalls' and 'linus' into tracing/core

Conflicts:
	arch/parisc/kernel/irq.c

MAINTAINERS

@@ -3356,10 +3356,8 @@ S:	Maintained
 PARISC ARCHITECTURE
 P:	Kyle McMartin
 M:	kyle@mcmartin.ca
-P:	Matthew Wilcox
-M:	matthew@wil.cx
-P:	Grant Grundler
-M:	grundler@parisc-linux.org
+P:	Helge Deller
+M:	deller@gmx.de
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git

arch/arm/kernel/entry-common.S

@@ -111,6 +111,7 @@ ENTRY(mcount)
 	.globl mcount_call
 mcount_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 ENTRY(ftrace_caller)
@@ -122,6 +123,7 @@ ENTRY(ftrace_caller)
 	.globl ftrace_call
 ftrace_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #else
@@ -133,6 +135,7 @@ ENTRY(mcount)
 	adr r0, ftrace_stub
 	cmp r0, r2
 	bne trace
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 trace:
@@ -141,6 +144,7 @@ trace:
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc
 	mov pc, r2
+	mov lr, r1				@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #endif /* CONFIG_DYNAMIC_FTRACE */

arch/arm/kernel/fiq.c

@@ -88,7 +88,7 @@ void set_fiq_handler(void *start, unsigned int length)
  * disable irqs for the duration.  Note - these functions are almost
  * entirely coded in assembly.
  */
-void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
+void __naked set_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (
@@ -106,7 +106,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
 }
 
-void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
+void __naked get_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -4,6 +4,8 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_board_info;
+
 struct ep93xx_eth_data
 {
 	unsigned char	dev_addr[6];

arch/arm/mach-mx1/devices.c

@@ -23,6 +23,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 
 static struct resource imx_csi_resources[] = {

arch/arm/mach-mx1/mx1ads.c

@@ -21,6 +21,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>

arch/arm/mach-omap2/board-omap3beagle.c

@@ -178,7 +178,9 @@ static int __init omap3_beagle_i2c_init(void)
 #ifdef CONFIG_I2C2_OMAP_BEAGLE
 	omap_register_i2c_bus(2, 400, NULL, 0);
 #endif
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 100, NULL, 0);
 	return 0;
 }
 

arch/arm/mach-orion5x/common.c

@@ -431,6 +431,10 @@ void __init orion5x_uart1_init(void)
 /*****************************************************************************
  * XOR engine
  ****************************************************************************/
+struct mv_xor_platform_shared_data orion5x_xor_shared_data = {
+	.dram		= &orion5x_mbus_dram_info,
+};
+
 static struct resource orion5x_xor_shared_resources[] = {
 	{
 		.name	= "xor low",
@@ -448,6 +452,9 @@ static struct resource orion5x_xor_shared_resources[] = {
 static struct platform_device orion5x_xor_shared = {
 	.name		= MV_XOR_SHARED_NAME,
 	.id		= 0,
+	.dev		= {
+		.platform_data	= &orion5x_xor_shared_data,
+	},
 	.num_resources	= ARRAY_SIZE(orion5x_xor_shared_resources),
 	.resource	= orion5x_xor_shared_resources,
 };

arch/arm/mach-s3c6410/mach-smdk6410.c

@@ -129,7 +129,7 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
-struct map_desc smdk6410_iodesc[] = {};
+static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
 #ifdef CONFIG_SMDK6410_SD_CH0
@@ -146,7 +146,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 
 static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("WM8580", 0X1b), },
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 };
 
 static struct i2c_board_info i2c_devs1[] __initdata = {

arch/arm/mm/copypage-feroceon.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 
-static void __attribute__((naked))
+static void __naked
 feroceon_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-v3.c

@@ -15,7 +15,7 @@
  *
  * FIXME: do we need to handle cache stuff...
  */
-static void __attribute__((naked))
+static void __naked
 v3_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\n\

arch/arm/mm/copypage-v4mc.c

@@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(minicache_lock);
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	asm volatile(

arch/arm/mm/copypage-v4wb.c

@@ -22,7 +22,7 @@
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __attribute__((naked))
+static void __naked
 v4wb_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-v4wt.c

@@ -20,7 +20,7 @@
  * dirty data in the cache.  However, we do have to ensure that
  * subsequent reads are up to date.
  */
-static void __attribute__((naked))
+static void __naked
 v4wt_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-xsc3.c

@@ -29,7 +29,7 @@
  * if we eventually end up using our copied page.
  *
  */
-static void __attribute__((naked))
+static void __naked
 xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-xscale.c

@@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock);
  * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
  * and merged as appropriate.
  */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	/*

arch/arm/mm/dma-mapping.c

@@ -490,26 +490,30 @@ core_initcall(consistent_init);
  */
 void dma_cache_maint(const void *start, size_t size, int direction)
 {
-	const void *end = start + size;
+	void (*inner_op)(const void *, const void *);
+	void (*outer_op)(unsigned long, unsigned long);
 
-	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
+	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
 
 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
-		dmac_inv_range(start, end);
-		outer_inv_range(__pa(start), __pa(end));
+		inner_op = dmac_inv_range;
+		outer_op = outer_inv_range;
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
-		dmac_clean_range(start, end);
-		outer_clean_range(__pa(start), __pa(end));
+		inner_op = dmac_clean_range;
+		outer_op = outer_clean_range;
 		break;
 	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		dmac_flush_range(start, end);
-		outer_flush_range(__pa(start), __pa(end));
+		inner_op = dmac_flush_range;
+		outer_op = outer_flush_range;
 		break;
 	default:
 		BUG();
 	}
+
+	inner_op(start, start + size);
+	outer_op(__pa(start), __pa(start) + size);
 }
 EXPORT_SYMBOL(dma_cache_maint);
 

arch/arm/mm/init.c

@@ -382,7 +382,7 @@ void __init bootmem_init(void)
 	for_each_node(node)
 		bootmem_free_node(node, mi);
 
-	high_memory = __va(memend_pfn << PAGE_SHIFT);
+	high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
 
 	/*
 	 * This doesn't seem to be used by the Linux memory manager any

arch/arm/mm/mmap.c

@@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size)
 {
 	if (addr < PHYS_OFFSET)
 		return 0;
-	if (addr + size > __pa(high_memory))
+	if (addr + size >= __pa(high_memory - 1))
 		return 0;
 
 	return 1;

arch/arm/plat-omap/Makefile

@@ -18,7 +18,8 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-obj-$(CONFIG_I2C_OMAP) += i2c.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
 
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o

arch/arm/plat-omap/common.c

@@ -199,21 +199,17 @@ static struct clocksource clocksource_32k = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-/*
- * Rounds down to nearest nsec.
- */
-unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
-	return cyc2ns(&clocksource_32k, ticks_32k);
-}
-
 /*
  * Returns current time from boot in nsecs. It's OK for this to wrap
  * around for now, as it's just a relative time stamp.
  */
 unsigned long long sched_clock(void)
 {
-	return omap_32k_ticks_to_nsecs(omap_32k_read());
+	unsigned long long ret;
+
+	ret = (unsigned long long)omap_32k_read();
+	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
+	return ret;
 }
 
 static int __init omap_init_clocksource_32k(void)

arch/arm/plat-omap/include/mach/common.h

@@ -35,7 +35,7 @@ extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 extern void omap_serial_init(void);
 extern void omap_serial_enable_clocks(int enable);
-#ifdef CONFIG_I2C_OMAP
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
 				 unsigned len);

arch/arm/plat-omap/include/mach/pm.h

@@ -108,7 +108,7 @@
 	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX) && \
 	!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
+#warning "Power management for this processor not implemented yet"
 #endif
 
 #ifndef __ASSEMBLER__

arch/arm/plat-s3c64xx/clock.c

@@ -248,7 +248,7 @@ static struct clk *clks[] __initdata = {
 	&clk_48m,
 };
 
-void s3c64xx_register_clocks(void)
+void __init s3c64xx_register_clocks(void)
 {
 	struct clk *clkp;
 	int ret;

arch/arm/plat-s3c64xx/gpiolib.c

@@ -417,4 +417,4 @@ static __init int s3c64xx_gpiolib_init(void)
 	return 0;
 }
 
-arch_initcall(s3c64xx_gpiolib_init);
+core_initcall(s3c64xx_gpiolib_init);

arch/arm/plat-s3c64xx/include/plat/irqs.h

@@ -117,7 +117,7 @@
 #define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
 #define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
 #define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
-#define IRQ_UHOST		S3C64XX_IRQ_VIC1(15)
+#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
 #define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
 #define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
 #define IRQ_IIC			S3C64XX_IRQ_VIC1(18)

arch/arm/plat-s3c64xx/irq-eint.c

@@ -14,12 +14,15 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/vic.h>
 
 #include <plat/regs-irqtype.h>
+#include <plat/regs-gpio.h>
+#include <plat/gpio-cfg.h>
 
 #include <mach/map.h>
 #include <plat/cpu.h>
@@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq)
 static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 {
 	int offs = eint_offset(irq);
+	int pin;
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 	ctrl |= newvalue << shift;
 	__raw_writel(ctrl, reg);
 
+	/* set the GPIO pin appropriately */
+
+	if (offs < 23)
+		pin = S3C64XX_GPN(offs);
+	else
+		pin = S3C64XX_GPM(offs - 23);
+
+	s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+
 	return 0;
 }
 
@@ -181,7 +194,7 @@ static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
 	s3c_irq_demux_eint(20, 27);
 }
 
-int __init s3c64xx_init_irq_eint(void)
+static int __init s3c64xx_init_irq_eint(void)
 {
 	int irq;
 

arch/arm/plat-s3c64xx/irq.c

@@ -207,7 +207,7 @@ static struct irq_chip s3c_irq_uart = {
 
 static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
 {
-	void *reg_base = uirq->regs;
+	void __iomem *reg_base = uirq->regs;
 	unsigned int irq;
 	int offs;
 

arch/arm/plat-s3c64xx/s3c6400-clock.c

@@ -36,7 +36,7 @@
  * ext_xtal_mux for want of an actual name from the manual.
 */
 
-struct clk clk_ext_xtal_mux = {
+static struct clk clk_ext_xtal_mux = {
 	.name		= "ext_xtal",
 	.id		= -1,
 };
@@ -63,7 +63,7 @@ struct clksrc_clk {
 	void __iomem		*reg_divider;
 };
 
-struct clk clk_fout_apll = {
+static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
 	.id		= -1,
 };
@@ -78,7 +78,7 @@ static struct clk_sources clk_src_apll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
 };
 
-struct clksrc_clk clk_mout_apll = {
+static struct clksrc_clk clk_mout_apll = {
 	.clk	= {
 		.name		= "mout_apll",
 		.id		= -1,
@@ -88,7 +88,7 @@ struct clksrc_clk clk_mout_apll = {
 	.sources	= &clk_src_apll,
 };
 
-struct clk clk_fout_epll = {
+static struct clk clk_fout_epll = {
 	.name		= "fout_epll",
 	.id		= -1,
 };
@@ -103,7 +103,7 @@ static struct clk_sources clk_src_epll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
 };
 
-struct clksrc_clk clk_mout_epll = {
+static struct clksrc_clk clk_mout_epll = {
 	.clk	= {
 		.name		= "mout_epll",
 		.id		= -1,
@@ -123,7 +123,7 @@ static struct clk_sources clk_src_mpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };
 
-struct clksrc_clk clk_mout_mpll = {
+static struct clksrc_clk clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 		.id		= -1,
@@ -145,7 +145,7 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 	return rate;
 }
 
-struct clk clk_dout_mpll = {
+static struct clk clk_dout_mpll = {
 	.name		= "dout_mpll",
 	.id		= -1,
 	.parent		= &clk_mout_mpll.clk,
@@ -189,10 +189,10 @@ static struct clk_sources clkset_uart = {
 };
 
 static struct clk *clkset_uhost_list[] = {
+	&clk_48m,
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
 	&clk_fin_epll,
-	&clk_48m,
 };
 
 static struct clk_sources clkset_uhost = {
@@ -239,10 +239,12 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
 
 	rate = clk_round_rate(clk, rate);
 	div = clk_get_rate(clk->parent) / rate;
+	if (div > 16)
+		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~sclk->mask;
-	val |= (rate - 1) << sclk->shift;
+	val &= ~(0xf << sclk->shift);
+	val |= (div - 1) << sclk->shift;
 	__raw_writel(val, reg);
 
 	return 0;
@@ -351,7 +353,7 @@ static struct clksrc_clk clk_mmc2 = {
 
 static struct clksrc_clk clk_usbhost = {
 	.clk	= {
-		.name		= "usb-host-bus",
+		.name		= "usb-bus-host",
 		.id		= -1,
 		.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
 		.enable		= s3c64xx_sclk_ctrl,

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sun Nov 30 16:39:36 2008
+# Last update: Thu Mar 12 18:01:45 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1811,7 +1811,7 @@ pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
 jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
 gprisc3			MACH_GPRISC3		GPRISC3			1823
-stamp9260		MACH_STAMP9260		STAMP9260		1824
+stamp9g20		MACH_STAMP9G20		STAMP9G20		1824
 smdk6430		MACH_SMDK6430		SMDK6430		1825
 smdkc100		MACH_SMDKC100		SMDKC100		1826
 tavorevb		MACH_TAVOREVB		TAVOREVB		1827
@@ -1993,4 +1993,134 @@ spark			MACH_SPARK		SPARK			2002
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htcvenus		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
+hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
+sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
+dack_sda_01		MACH_DACK_SDA_01	DACK_SDA_01		2010
+armbox			MACH_ARMBOX		ARMBOX			2011
+harris_rvp		MACH_HARRIS_RVP		HARRIS_RVP		2012
+ribaldo			MACH_RIBALDO		RIBALDO			2013
+agora			MACH_AGORA		AGORA			2014
+omap3_mini		MACH_OMAP3_MINI		OMAP3_MINI		2015
+a9sam6432_b		MACH_A9SAM6432_B	A9SAM6432_B		2016
+usg2410			MACH_USG2410		USG2410			2017
+pc72052_i10_revb	MACH_PC72052_I10_REVB	PC72052_I10_REVB	2018
+mx35_exm32		MACH_MX35_EXM32		MX35_EXM32		2019
+topas910		MACH_TOPAS910		TOPAS910		2020
+hyena			MACH_HYENA		HYENA			2021
+pospax			MACH_POSPAX		POSPAX			2022
+hdl_gx			MACH_HDL_GX		HDL_GX			2023
+ctera_4bay		MACH_CTERA_4BAY		CTERA_4BAY		2024
+ctera_plug_c		MACH_CTERA_PLUG_C	CTERA_PLUG_C		2025
+crwea_plug_i		MACH_CRWEA_PLUG_I	CRWEA_PLUG_I		2026
+egauge2			MACH_EGAUGE2		EGAUGE2			2027
+didj			MACH_DIDJ		DIDJ			2028
+m_s3c2443		MACH_MEISTER		MEISTER			2029
+htcblackstone		MACH_HTCBLACKSTONE	HTCBLACKSTONE		2030
+cpuat9g20		MACH_CPUAT9G20		CPUAT9G20		2031
+smdk6440		MACH_SMDK6440		SMDK6440		2032
+omap_35xx_mvp		MACH_OMAP_35XX_MVP	OMAP_35XX_MVP		2033
+ctera_plug_i		MACH_CTERA_PLUG_I	CTERA_PLUG_I		2034
+pvg610_100		MACH_PVG610		PVG610			2035
+hprw6815		MACH_HPRW6815		HPRW6815		2036
+omap3_oswald		MACH_OMAP3_OSWALD	OMAP3_OSWALD		2037
+nas4220b		MACH_NAS4220B		NAS4220B		2038
+htcraphael_cdma		MACH_HTCRAPHAEL_CDMA	HTCRAPHAEL_CDMA		2039
+htcdiamond_cdma		MACH_HTCDIAMOND_CDMA	HTCDIAMOND_CDMA		2040
+scaler			MACH_SCALER		SCALER			2041
+zylonite2		MACH_ZYLONITE2		ZYLONITE2		2042
+aspenite		MACH_ASPENITE		ASPENITE		2043
+teton			MACH_TETON		TETON			2044
+ttc_dkb			MACH_TTC_DKB		TTC_DKB			2045
+bishop2			MACH_BISHOP2		BISHOP2			2046
+ippv5			MACH_IPPV5		IPPV5			2047
+farm926			MACH_FARM926		FARM926			2048
+mmccpu			MACH_MMCCPU		MMCCPU			2049
+sgmsfl			MACH_SGMSFL		SGMSFL			2050
+tt8000			MACH_TT8000		TT8000			2051
+zrn4300lp		MACH_ZRN4300LP		ZRN4300LP		2052
+mptc			MACH_MPTC		MPTC			2053
+h6051			MACH_H6051		H6051			2054
+pvg610_101		MACH_PVG610_101		PVG610_101		2055
+stamp9261_pc_evb	MACH_STAMP9261_PC_EVB	STAMP9261_PC_EVB	2056
+pelco_odysseus		MACH_PELCO_ODYSSEUS	PELCO_ODYSSEUS		2057
+tny_a9260		MACH_TNY_A9260		TNY_A9260		2058
+tny_a9g20		MACH_TNY_A9G20		TNY_A9G20		2059
+aesop_mp2530f		MACH_AESOP_MP2530F	AESOP_MP2530F		2060
+dx900			MACH_DX900		DX900			2061
+cpodc2			MACH_CPODC2		CPODC2			2062
+tilt_8925		MACH_TILT_8925		TILT_8925		2063
+davinci_dm357_evm	MACH_DAVINCI_DM357_EVM	DAVINCI_DM357_EVM	2064
+swordfish		MACH_SWORDFISH		SWORDFISH		2065
+corvus			MACH_CORVUS		CORVUS			2066
+taurus			MACH_TAURUS		TAURUS			2067
+axm			MACH_AXM		AXM			2068
+axc			MACH_AXC		AXC			2069
+baby			MACH_BABY		BABY			2070
+mp200			MACH_MP200		MP200			2071
+pcm043			MACH_PCM043		PCM043			2072
+hanlin_v3c		MACH_HANLIN_V3C		HANLIN_V3C		2073
+kbk9g20			MACH_KBK9G20		KBK9G20			2074
+adsturbog5		MACH_ADSTURBOG5		ADSTURBOG5		2075
+avenger_lite1		MACH_AVENGER_LITE1	AVENGER_LITE1		2076
+suc82x			MACH_SUC		SUC			2077
+at91sam7s256		MACH_AT91SAM7S256	AT91SAM7S256		2078
+mendoza			MACH_MENDOZA		MENDOZA			2079
+kira			MACH_KIRA		KIRA			2080
+mx1hbm			MACH_MX1HBM		MX1HBM			2081
+quatro43xx		MACH_QUATRO43XX		QUATRO43XX		2082
+quatro4230		MACH_QUATRO4230		QUATRO4230		2083
+nsb400			MACH_NSB400		NSB400			2084
+drp255			MACH_DRP255		DRP255			2085
+thoth			MACH_THOTH		THOTH			2086
+firestone		MACH_FIRESTONE		FIRESTONE		2087
+asusp750		MACH_ASUSP750		ASUSP750		2088
+ctera_dl		MACH_CTERA_DL		CTERA_DL		2089
+socr			MACH_SOCR		SOCR			2090
+htcoxygen		MACH_HTCOXYGEN		HTCOXYGEN		2091
+heroc			MACH_HEROC		HEROC			2092
+zeno6800		MACH_ZENO6800		ZENO6800		2093
+sc2mcs			MACH_SC2MCS		SC2MCS			2094
+gene100			MACH_GENE100		GENE100			2095
+as353x			MACH_AS353X		AS353X			2096
+sheevaplug		MACH_SHEEVAPLUG		SHEEVAPLUG		2097
+at91sam9g20		MACH_AT91SAM9G20	AT91SAM9G20		2098
+mv88f6192gtw_fe		MACH_MV88F6192GTW_FE	MV88F6192GTW_FE		2099
+cc9200			MACH_CC9200		CC9200			2100
+sm9200			MACH_SM9200		SM9200			2101
+tp9200			MACH_TP9200		TP9200			2102
+snapperdv		MACH_SNAPPERDV		SNAPPERDV		2103
+avengers_lite		MACH_AVENGERS_LITE	AVENGERS_LITE		2104
+avengers_lite1		MACH_AVENGERS_LITE1	AVENGERS_LITE1		2105
+omap3axon		MACH_OMAP3AXON		OMAP3AXON		2106
+ma8xx			MACH_MA8XX		MA8XX			2107
+mp201ek			MACH_MP201EK		MP201EK			2108
+davinci_tux		MACH_DAVINCI_TUX	DAVINCI_TUX		2109
+mpa1600			MACH_MPA1600		MPA1600			2110
+pelco_troy		MACH_PELCO_TROY		PELCO_TROY		2111
+nsb667			MACH_NSB667		NSB667			2112
+rovers5_4mpix		MACH_ROVERS5_4MPIX	ROVERS5_4MPIX		2113
+twocom			MACH_TWOCOM		TWOCOM			2114
+ubisys_p9_rcu3r2	MACH_UBISYS_P9_RCU3R2	UBISYS_P9_RCU3R2	2115
+hero_espresso		MACH_HERO_ESPRESSO	HERO_ESPRESSO		2116
+afeusb			MACH_AFEUSB		AFEUSB			2117
+t830			MACH_T830		T830			2118
+spd8020_cc		MACH_SPD8020_CC		SPD8020_CC		2119
+om_3d7k			MACH_OM_3D7K		OM_3D7K			2120
+picocom2		MACH_PICOCOM2		PICOCOM2		2121
+uwg4mx27		MACH_UWG4MX27		UWG4MX27		2122
+uwg4mx31		MACH_UWG4MX31		UWG4MX31		2123
+cherry			MACH_CHERRY		CHERRY			2124
+mx51_babbage		MACH_MX51_BABBAGE	MX51_BABBAGE		2125
+s3c2440turkiye		MACH_S3C2440TURKIYE	S3C2440TURKIYE		2126
+tx37			MACH_TX37		TX37			2127
+sbc2800_9g20		MACH_SBC2800_9G20	SBC2800_9G20		2128
+benzglb			MACH_BENZGLB		BENZGLB			2129
+benztd			MACH_BENZTD		BENZTD			2130
+cartesio_plus		MACH_CARTESIO_PLUS	CARTESIO_PLUS		2131
+solrad_g20		MACH_SOLRAD_G20		SOLRAD_G20		2132
+mx27wallace		MACH_MX27WALLACE	MX27WALLACE		2133
+fmzwebmodul		MACH_FMZWEBMODUL	FMZWEBMODUL		2134
+rd78x00_masa		MACH_RD78X00_MASA	RD78X00_MASA		2135
+smallogger		MACH_SMALLOGGER		SMALLOGGER		2136

arch/mips/Kconfig

@@ -238,8 +238,12 @@ config MIPS_SIM
 	  This option enables support for MIPS Technologies MIPSsim software
 	  emulator.
 
-config MACH_EMMA
-	bool "NEC EMMA series based machines"
+config NEC_MARKEINS
+	bool "NEC EMMA2RH Mark-eins board"
+	select SOC_EMMA2RH
+	select HW_HAS_PCI
+	help
+	  This enables support for the NEC Electronics Mark-eins boards.
 
 config MACH_VR41XX
 	bool "NEC VR4100 series based machines"
@@ -637,7 +641,6 @@ endchoice
 
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
-source "arch/mips/emma/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
@@ -895,6 +898,18 @@ config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
 
+config SOC_EMMA2RH
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_R5500
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+
 config SOC_PNX833X
 	bool
 	select CEVT_R4K
@@ -930,11 +945,6 @@ config SOC_PNX8550
 config SWAP_IO_SPACE
 	bool
 
-config EMMA2RH
-	bool
-	depends on MARKEINS
-	default y
-
 config SERIAL_RM9000
 	bool
 

arch/mips/Makefile

@@ -416,7 +416,7 @@ load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
 #
 # Common NEC EMMAXXX
 #
-core-$(CONFIG_SOC_EMMA)		+= arch/mips/emma/common/
+core-$(CONFIG_SOC_EMMA2RH)	+= arch/mips/emma/common/
 cflags-$(CONFIG_SOC_EMMA2RH)	+= -I$(srctree)/arch/mips/include/asm/mach-emma2rh
 
 #

arch/mips/configs/emma2rh_defconfig → arch/mips/configs/markeins_defconfig

@@ -35,7 +35,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-CONFIG_MARKEINS=y
+CONFIG_NEC_MARKEINS=y
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -68,7 +68,7 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
-CONFIG_EMMA2RH=y
+CONFIG_SOC_EMMA2RH=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
@@ -574,9 +574,9 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x1e000000
-CONFIG_MTD_PHYSMAP_LEN=0x02000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_PLATRAM is not set
 
 #

arch/mips/emma/Kconfig

@@ -1,29 +0,0 @@
-choice
-	prompt "Machine type"
-	depends on MACH_EMMA
-	default NEC_MARKEINS
-
-config NEC_MARKEINS
-	bool "NEC EMMA2RH Mark-eins board"
-	select SOC_EMMA2RH
-	select HW_HAS_PCI
-	help
-	  This enables support for the NEC Electronics Mark-eins boards.
-
-endchoice
-
-config SOC_EMMA2RH
-	bool
-	select SOC_EMMA
-	select SYS_HAS_CPU_R5500
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-
-config SOC_EMMA
-	bool
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_BIG_ENDIAN

arch/mips/emma/markeins/platform.c

@@ -141,13 +141,6 @@ static struct  platform_device serial_emma = {
 	},
 };
 
-static struct platform_device *devices[] = {
-	&i2c_emma_devices[0],
-	&i2c_emma_devices[1],
-	&i2c_emma_devices[2],
-	&serial_emma,
-};
-
 static struct mtd_partition markeins_parts[] = {
 	[0] = {
 		.name = "RootFS",
@@ -181,11 +174,39 @@ static struct mtd_partition markeins_parts[] = {
 	},
 };
 
+static struct physmap_flash_data markeins_flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(markeins_parts),
+	.parts		= markeins_parts
+};
+
+static struct resource markeins_flash_resource = {
+	.start		= 0x1e000000,
+	.end		= 0x02000000,
+	.flags		= IORESOURCE_MEM
+};
+
+static struct platform_device markeins_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+        	.platform_data  = &markeins_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &markeins_flash_resource,
+};
+
+static struct platform_device *devices[] = {
+	i2c_emma_devices,
+	i2c_emma_devices + 1,
+	i2c_emma_devices + 2,
+	&serial_emma,
+	&markeins_flash_device,
+};
+
 static int __init platform_devices_setup(void)
 {
-	physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts));
 	return platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 arch_initcall(platform_devices_setup);
-

arch/mips/include/asm/seccomp.h

@@ -15,8 +15,6 @@
  */
 #ifdef CONFIG_MIPS32_O32
 
-#define TIF_32BIT TIF_32BIT_REGS
-
 #define __NR_seccomp_read_32		4003
 #define __NR_seccomp_write_32		4004
 #define __NR_seccomp_exit_32		4001
@@ -24,8 +22,6 @@
 
 #elif defined(CONFIG_MIPS32_N32)
 
-#define TIF_32BIT _TIF_32BIT_ADDR
-
 #define __NR_seccomp_read_32		6000
 #define __NR_seccomp_write_32		6001
 #define __NR_seccomp_exit_32		6058

arch/mips/include/asm/thread_info.h

@@ -127,6 +127,12 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_LOAD_WATCH		25	/* If set, load watch registers */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
+#ifdef CONFIG_MIPS32_O32
+#define TIF_32BIT TIF_32BIT_REGS
+#elif defined(CONFIG_MIPS32_N32)
+#define TIF_32BIT _TIF_32BIT_ADDR
+#endif /* CONFIG_MIPS32_O32 */
+
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)

arch/parisc/configs/712_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:00:07 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:55 2009
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -33,17 +33,35 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -55,29 +73,38 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,6 +118,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -114,17 +142,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_HPUX is not set
 
 #
@@ -138,10 +168,6 @@ CONFIG_GSC_LASI=y
 # CONFIG_EISA is not set
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -156,16 +182,15 @@ CONFIG_PDC_STABLE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -173,6 +198,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -203,25 +229,25 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -230,6 +256,7 @@ CONFIG_IP_NF_QUEUE=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -240,28 +267,26 @@ CONFIG_LLC2=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -276,6 +301,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -298,11 +325,19 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
 # CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -342,14 +377,17 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
 CONFIG_SCSI_LASI700=y
 CONFIG_53C700_LE_ON_BE=y
 # CONFIG_SCSI_ZALON is not set
 CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -362,7 +400,6 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -377,6 +414,9 @@ CONFIG_LASI_82596=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
 CONFIG_NETDEV_1000=y
@@ -387,6 +427,11 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -401,7 +446,6 @@ CONFIG_PPPOE=m
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -423,7 +467,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -446,8 +489,8 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -474,9 +517,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -501,72 +546,76 @@ CONFIG_PDC_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=m
-# CONFIG_TIPAR is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
 # CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -579,6 +628,14 @@ CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_STI=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -606,15 +663,8 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -630,10 +680,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
@@ -641,63 +688,82 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 # CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
 CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -707,7 +773,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
@@ -717,19 +783,18 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -759,16 +824,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -778,35 +840,34 @@ CONFIG_RAMFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
@@ -815,6 +876,7 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
 # CONFIG_CIFS_XATTR is not set
 # CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
@@ -827,10 +889,6 @@ CONFIG_CIFS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -871,33 +929,28 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -909,10 +962,32 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_RODATA=y
 
 #
@@ -921,57 +996,113 @@ CONFIG_DEBUG_RODATA=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m

arch/parisc/configs/a500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:12:44 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:56 2009
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -34,18 +34,30 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CPUSETS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -57,28 +69,40 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -93,6 +117,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -118,12 +143,12 @@ CONFIG_NODES_SHIFT=3
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM_MANUAL=y
@@ -131,11 +156,12 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_COMPAT=y
 CONFIG_NR_CPUS=8
 
@@ -145,14 +171,13 @@ CONFIG_NR_CPUS=8
 # CONFIG_GSC is not set
 CONFIG_PCI=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
@@ -187,16 +212,15 @@ CONFIG_PDC_STABLE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -204,6 +228,8 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -234,7 +260,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -250,66 +275,72 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
 # CONFIG_NETFILTER_XT_MATCH_MAC is not set
 # CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 # CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 # CONFIG_NETFILTER_XT_MATCH_STRING is not set
 # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
 # CONFIG_NETFILTER_XT_MATCH_TIME is not set
 # CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 # CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
@@ -318,33 +349,30 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 # CONFIG_IP6_NF_QUEUE is not set
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-# CONFIG_IP6_NF_MATCH_OWNER is not set
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 # CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
 # CONFIG_IP_DCCP_CCID3 is not set
 
@@ -356,6 +384,7 @@ CONFIG_IP_DCCP_CCID2=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -366,28 +395,26 @@ CONFIG_LLC2=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -402,6 +429,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -421,14 +450,23 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -468,8 +506,10 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -478,16 +518,21 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
@@ -503,9 +548,11 @@ CONFIG_SCSI_QLOGIC_1280=m
 CONFIG_SCSI_DEBUG=m
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -514,10 +561,6 @@ CONFIG_MD_RAID1=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=m
 CONFIG_FUSION_FC=m
@@ -529,20 +572,40 @@ CONFIG_FUSION_CTL=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
@@ -567,33 +630,38 @@ CONFIG_HP100=m
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -601,23 +669,31 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -625,6 +701,11 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
@@ -650,7 +731,6 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -669,7 +749,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -693,10 +772,13 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -721,17 +803,12 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-CONFIG_AGP=y
-CONFIG_AGP_PARISC=y
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -739,51 +816,66 @@ CONFIG_AGP_PARISC=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -792,50 +884,83 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
 # CONFIG_STI_CONSOLE is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
-#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -845,7 +970,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
@@ -855,19 +980,19 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -897,16 +1022,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -916,34 +1038,33 @@ CONFIG_RAMFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
@@ -952,6 +1073,7 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
 # CONFIG_CIFS_XATTR is not set
 # CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
@@ -964,10 +1086,6 @@ CONFIG_CIFS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1008,33 +1126,28 @@ CONFIG_NLS_ISO8859_15=m
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1046,10 +1159,33 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_RODATA is not set
 
 #
@@ -1058,56 +1194,112 @@ CONFIG_FORCED_INLINING=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m

arch/parisc/configs/b180_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:16:46 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:57 2009
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -33,13 +33,29 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -51,27 +67,34 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -85,6 +108,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -108,13 +132,15 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_HPUX is not set
 
 #
@@ -130,14 +156,14 @@ CONFIG_EISA_NAMES=y
 CONFIG_ISA=y
 CONFIG_PCI=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_GSC_DINO=y
 # CONFIG_PCI_LBA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # PA-RISC specific drivers
@@ -151,16 +177,15 @@ CONFIG_PDC_STABLE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -205,36 +230,37 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -247,7 +273,9 @@ CONFIG_IPV6_SIT=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -275,10 +303,18 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=y
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -317,8 +353,10 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -330,12 +368,15 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -346,6 +387,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_NCR53C406A is not set
 CONFIG_SCSI_LASI700=y
 CONFIG_53C700_LE_ON_BE=y
@@ -360,7 +402,6 @@ CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
 CONFIG_SCSI_NCR53C8XX_SYNC=40
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
@@ -373,9 +414,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=40
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -383,26 +426,18 @@ CONFIG_MD_RAID1=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -434,36 +469,49 @@ CONFIG_TULIP=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
 # CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -471,6 +519,11 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PLIP is not set
@@ -503,7 +556,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -526,11 +578,12 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -564,9 +617,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -598,75 +653,79 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -691,6 +750,7 @@ CONFIG_FB_STI=y
 # CONFIG_FB_ATY is not set
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -698,7 +758,16 @@ CONFIG_FB_STI=y
 # CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -718,15 +787,8 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -742,10 +804,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
@@ -753,10 +812,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 # CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -765,9 +821,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_DARLA20 is not set
@@ -792,6 +850,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -809,30 +868,23 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
 CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -840,36 +892,63 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -879,19 +958,18 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -917,35 +995,32 @@ CONFIG_JOLIET=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
@@ -962,10 +1037,6 @@ CONFIG_SMB_FS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1011,7 +1082,9 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1019,9 +1092,12 @@ CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1033,10 +1109,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_RODATA is not set
 
 #
@@ -1044,52 +1139,108 @@ CONFIG_FORCED_INLINING=y
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_PCBC is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/parisc/hpux/fs.c

@@ -137,7 +137,6 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i
 			error = count - buf.count;
 	}
 
-out_putf:
 	fput(file);
 out:
 	return error;

arch/parisc/include/asm/assembly.h

@@ -79,6 +79,7 @@
 
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
+#include <asm/types.h>
 
 #include <asm/asmregs.h>
 
@@ -129,27 +130,27 @@
 
 	/* Shift Left - note the r and t can NOT be the same! */
 	.macro shl r, sa, t
-	dep,z	\r, 31-\sa, 32-\sa, \t
+	dep,z	\r, 31-(\sa), 32-(\sa), \t
 	.endm
 
 	/* The PA 2.0 shift left */
 	.macro shlw r, sa, t
-	depw,z	\r, 31-\sa, 32-\sa, \t
+	depw,z	\r, 31-(\sa), 32-(\sa), \t
 	.endm
 
 	/* And the PA 2.0W shift left */
 	.macro shld r, sa, t
-	depd,z	\r, 63-\sa, 64-\sa, \t
+	depd,z	\r, 63-(\sa), 64-(\sa), \t
 	.endm
 
 	/* Shift Right - note the r and t can NOT be the same! */
 	.macro shr r, sa, t
-	extru \r, 31-\sa, 32-\sa, \t
+	extru \r, 31-(\sa), 32-(\sa), \t
 	.endm
 
 	/* pa20w version of shift right */
 	.macro shrd r, sa, t
-	extrd,u \r, 63-\sa, 64-\sa, \t
+	extrd,u \r, 63-(\sa), 64-(\sa), \t
 	.endm
 
 	/* load 32-bit 'value' into 'reg' compensating for the ldil

arch/parisc/include/asm/io.h

@@ -174,15 +174,48 @@ static inline void __raw_writeq(unsigned long long b, volatile void __iomem *add
 	*(volatile unsigned long long __force *) addr = b;
 }
 
-/* readb can never be const, so use __fswab instead of le*_to_cpu */
-#define readb(addr) __raw_readb(addr)
-#define readw(addr) le16_to_cpu(__raw_readw(addr))
-#define readl(addr) le32_to_cpu(__raw_readl(addr))
-#define readq(addr) le64_to_cpu(__raw_readq(addr))
-#define writeb(b, addr) __raw_writeb(b, addr)
-#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr)
-#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr)
-#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+	return __raw_readb(addr);
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+	return le16_to_cpu(__raw_readw(addr));
+}
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+	return le32_to_cpu(__raw_readl(addr));
+}
+static inline unsigned long long readq(const volatile void __iomem *addr)
+{
+	return le64_to_cpu(__raw_readq(addr));
+}
+
+static inline void writeb(unsigned char b, volatile void __iomem *addr)
+{
+	__raw_writeb(b, addr);
+}
+static inline void writew(unsigned short w, volatile void __iomem *addr)
+{
+	__raw_writew(cpu_to_le16(w), addr);
+}
+static inline void writel(unsigned int l, volatile void __iomem *addr)
+{
+	__raw_writel(cpu_to_le32(l), addr);
+}
+static inline void writeq(unsigned long long q, volatile void __iomem *addr)
+{
+	__raw_writeq(cpu_to_le64(q), addr);
+}
+
+#define	readb	readb
+#define	readw	readw
+#define	readl	readl
+#define readq	readq
+#define writeb	writeb
+#define writew	writew
+#define writel	writel
+#define writeq	writeq
 
 #define readb_relaxed(addr) readb(addr)
 #define readw_relaxed(addr) readw(addr)

arch/parisc/include/asm/irq.h

@@ -49,7 +49,7 @@ extern unsigned long txn_alloc_addr(unsigned int);
 extern unsigned long txn_affinity_addr(unsigned int irq, int cpu);
 
 extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *);
-extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest);
+extern int cpu_check_affinity(unsigned int irq, const struct cpumask *dest);
 
 /* soft power switch support (power.c) */
 extern struct tasklet_struct power_tasklet;

arch/parisc/include/asm/uaccess.h

@@ -241,6 +241,7 @@ unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned lo
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
+struct pt_regs;
 int fixup_exception(struct pt_regs *regs);
 
 #endif /* __PARISC_UACCESS_H */

arch/parisc/kernel/cache.c

@@ -551,10 +551,7 @@ void flush_cache_range(struct vm_area_struct *vma,
 {
 	int sr3;
 
-	if (!vma->vm_mm->context) {
-		BUG();
-		return;
-	}
+	BUG_ON(!vma->vm_mm->context);
 
 	sr3 = mfsp(3);
 	if (vma->vm_mm->context == sr3) {

arch/parisc/kernel/entry.S

@@ -368,7 +368,7 @@
 	 * abstractions for the macros */
 	.macro		EXTR	reg1,start,length,reg2
 #ifdef CONFIG_64BIT
-	extrd,u		\reg1,32+\start,\length,\reg2
+	extrd,u		\reg1,32+(\start),\length,\reg2
 #else
 	extrw,u		\reg1,\start,\length,\reg2
 #endif
@@ -376,7 +376,7 @@
 
 	.macro		DEP	reg1,start,length,reg2
 #ifdef CONFIG_64BIT
-	depd		\reg1,32+\start,\length,\reg2
+	depd		\reg1,32+(\start),\length,\reg2
 #else
 	depw		\reg1,\start,\length,\reg2
 #endif
@@ -384,7 +384,7 @@
 
 	.macro		DEPI	val,start,length,reg
 #ifdef CONFIG_64BIT
-	depdi		\val,32+\start,\length,\reg
+	depdi		\val,32+(\start),\length,\reg
 #else
 	depwi		\val,\start,\length,\reg
 #endif

arch/parisc/kernel/firmware.c

@@ -151,7 +151,7 @@ static void convert_to_wide(unsigned long *addr)
 }
 
 #ifdef CONFIG_64BIT
-void __init set_firmware_width_unlocked(void)
+void __cpuinit set_firmware_width_unlocked(void)
 {
 	int ret;
 
@@ -168,7 +168,7 @@ void __init set_firmware_width_unlocked(void)
  * This function must be called before any pdc_* function that uses the
  * convert_to_wide function.
  */
-void __init set_firmware_width(void)
+void __cpuinit set_firmware_width(void)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&pdc_lock, flags);
@@ -176,11 +176,11 @@ void __init set_firmware_width(void)
 	spin_unlock_irqrestore(&pdc_lock, flags);
 }
 #else
-void __init set_firmware_width_unlocked(void) {
+void __cpuinit set_firmware_width_unlocked(void) {
 	return;
 }
 
-void __init set_firmware_width(void) {
+void __cpuinit set_firmware_width(void) {
 	return;
 }
 #endif /*CONFIG_64BIT*/
@@ -302,7 +302,7 @@ int pdc_chassis_warn(unsigned long *warn)
 	return retval;
 }
 
-int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
+int __cpuinit pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
 {
 	int ret;
 
@@ -323,7 +323,7 @@ int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
  * This PDC call returns the presence and status of all the coprocessors
  * attached to the processor.
  */
-int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
+int __cpuinit pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
 {
 	int ret;
 	unsigned long flags;

arch/parisc/kernel/irq.c

@@ -112,7 +112,7 @@ void cpu_end_irq(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
+int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu_dest;
 
@@ -120,23 +120,25 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
 	if (CHECK_IRQ_PER_CPU(irq)) {
 		/* Bad linux design decision.  The mask has already
 		 * been set; we must reset it */
-		cpumask_setall(irq_desc[irq].affinity);
+		cpumask_setall(&irq_desc[irq].affinity);
 		return -EINVAL;
 	}
 
 	/* whatever mask they set, we just allow one CPU */
 	cpu_dest = first_cpu(*dest);
-	*dest = cpumask_of_cpu(cpu_dest);
 
-	return 0;
+	return cpu_dest;
 }
 
 static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
 {
-	if (cpu_check_affinity(irq, dest))
+	int cpu_dest;
+
+	cpu_dest = cpu_check_affinity(irq, dest);
+	if (cpu_dest < 0)
 		return;
 
-	cpumask_copy(irq_desc[irq].affinity, dest);
+	cpumask_copy(&irq_desc[irq].affinity, dest);
 }
 #endif
 
@@ -295,7 +297,7 @@ int txn_alloc_irq(unsigned int bits_wide)
 unsigned long txn_affinity_addr(unsigned int irq, int cpu)
 {
 #ifdef CONFIG_SMP
-	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
+	cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
 #endif
 
 	return per_cpu(cpu_data, cpu).txn_addr;
@@ -352,7 +354,7 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	irq = eirr_to_irq(eirr_val);
 
 #ifdef CONFIG_SMP
-	cpumask_copy(&dest, irq_desc[irq].affinity);
+	cpumask_copy(&dest, &irq_desc[irq].affinity);
 	if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
 	    !cpu_isset(smp_processor_id(), dest)) {
 		int cpu = first_cpu(dest);

arch/parisc/kernel/pci-dma.c

@@ -447,10 +447,7 @@ static void pa11_dma_free_consistent (struct device *dev, size_t size, void *vad
 
 static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE) {
-		printk(KERN_ERR "pa11_dma_map_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
-		BUG();
-	}
+	BUG_ON(direction == DMA_NONE);
 
 	flush_kernel_dcache_range((unsigned long) addr, size);
 	return virt_to_phys(addr);
@@ -458,10 +455,7 @@ static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t siz
 
 static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE) {
-		printk(KERN_ERR "pa11_dma_unmap_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
-		BUG();
-	}
+	BUG_ON(direction == DMA_NONE);
 
 	if (direction == DMA_TO_DEVICE)
 	    return;
@@ -480,8 +474,7 @@ static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist, int n
 {
 	int i;
 
-	if (direction == DMA_NONE)
-	    BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	for (i = 0; i < nents; i++, sglist++ ) {
 		unsigned long vaddr = sg_virt_addr(sglist);
@@ -496,8 +489,7 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in
 {
 	int i;
 
-	if (direction == DMA_NONE)
-	    BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	if (direction == DMA_TO_DEVICE)
 	    return;
@@ -511,16 +503,14 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in
 
 static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE)
-	    BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
 }
 
 static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE)
-	    BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
 }

arch/parisc/mm/init.c

@@ -304,10 +304,8 @@ static void __init setup_bootmem(void)
 	 */
 	max_low_pfn = max_pfn;
 
-	if ((bootmap_pfn - bootmap_start_pfn) != bootmap_pages) {
-		printk(KERN_WARNING "WARNING! bootmap sizing is messed up!\n");
-		BUG();
-	}
+	/* bootmap sizing messed up? */
+	BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages);
 
 	/* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */
 

arch/x86/Kconfig

@@ -933,6 +933,12 @@ config X86_CPUID
 	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
 	  /dev/cpu/31/cpuid.
 
+config X86_CPU_DEBUG
+	tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
+	---help---
+	  If you select this option, this will provide various x86 CPUs
+	  information through debugfs.
+
 choice
 	prompt "High Memory Support"
 	default HIGHMEM4G if !X86_NUMAQ
@@ -1433,7 +1439,7 @@ config CRASH_DUMP
 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	depends on KEXEC && HIBERNATION && X86_32
+	depends on KEXEC && HIBERNATION
 	---help---
 	  Jump between original kernel and kexeced kernel and invoke
 	  code in physical address mode via KEXEC

arch/x86/boot/Makefile

@@ -6,26 +6,23 @@
 # for more details.
 #
 # Copyright (C) 1994 by Linus Torvalds
+# Changed by many, many contributors over the years.
 #
 
 # ROOT_DEV specifies the default root-device when making the image.
 # This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
 # the default of FLOPPY is used by 'build'.
 
-ROOT_DEV := CURRENT
+ROOT_DEV	:= CURRENT
 
 # If you want to preset the SVGA mode, uncomment the next line and
 # set SVGA_MODE to whatever number you want.
 # Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
 # The number is the same as you would ordinarily press at bootup.
 
-SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
+SVGA_MODE	:= -DSVGA_MODE=NORMAL_VGA
 
-# If you want the RAM disk device, define this to be the size in blocks.
-
-#RAMDISK := -DRAMDISK=512
-
-targets		:= vmlinux.bin setup.bin setup.elf zImage bzImage
+targets		:= vmlinux.bin setup.bin setup.elf bzImage
 subdir-		:= compressed
 
 setup-y		+= a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
@@ -71,17 +68,13 @@ KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
 KBUILD_CFLAGS +=   $(call cc-option,-m32)
 KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
 
-$(obj)/zImage:  asflags-y := $(SVGA_MODE) $(RAMDISK)
-$(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__
-$(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
-$(obj)/bzImage: BUILDFLAGS   := -b
+$(obj)/bzImage: asflags-y  := $(SVGA_MODE)
 
 quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
-	    $(obj)/vmlinux.bin $(ROOT_DEV) > $@
+cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
+	$(ROOT_DEV) > $@
 
-$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
-			      $(obj)/vmlinux.bin $(obj)/tools/build FORCE
+$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
 	$(call if_changed,image)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 

arch/x86/boot/header.S

@@ -24,12 +24,8 @@
 #include "boot.h"
 #include "offsets.h"
 
-SETUPSECTS	= 4			/* default nr of setup-sectors */
 BOOTSEG		= 0x07C0		/* original address of boot-sector */
-SYSSEG		= DEF_SYSSEG		/* system loaded at 0x10000 (65536) */
-SYSSIZE		= DEF_SYSSIZE		/* system size: # of 16-byte clicks */
-					/* to be loaded */
-ROOT_DEV	= 0			/* ROOT_DEV is now written by "build" */
+SYSSEG		= 0x1000		/* historical load address >> 4 */
 
 #ifndef SVGA_MODE
 #define SVGA_MODE ASK_VGA
@@ -97,12 +93,12 @@ bugger_off_msg:
 	.section ".header", "a"
 	.globl	hdr
 hdr:
-setup_sects:	.byte SETUPSECTS
+setup_sects:	.byte 0			/* Filled in by build.c */
 root_flags:	.word ROOT_RDONLY
-syssize:	.long SYSSIZE
-ram_size:	.word RAMDISK
+syssize:	.long 0			/* Filled in by build.c */
+ram_size:	.word 0			/* Obsolete */
 vid_mode:	.word SVGA_MODE
-root_dev:	.word ROOT_DEV
+root_dev:	.word 0			/* Filled in by build.c */
 boot_flag:	.word 0xAA55
 
 	# offset 512, entry point
@@ -123,14 +119,15 @@ _start:
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
-start_sys_seg:	.word	SYSSEG
+start_sys_seg:	.word	SYSSEG		# obsolete and meaningless, but just
+					# in case something decided to "use" it
 		.word	kernel_version-512 # pointing to kernel version string
 					# above section of header is compatible
 					# with loadlin-1.5 (header v1.5). Don't
 					# change it.
 
-type_of_loader:	.byte	0		# = 0, old one (LILO, Loadlin,
-					#      Bootlin, SYSLX, bootsect...)
+type_of_loader:	.byte	0		# 0 means ancient bootloader, newer
+					# bootloaders know to change this.
 					# See Documentation/i386/boot.txt for
 					# assigned ids
 
@@ -142,11 +139,7 @@ CAN_USE_HEAP	= 0x80			# If set, the loader also has set
 					# space behind setup.S can be used for
 					# heap purposes.
 					# Only the loader knows what is free
-#ifndef __BIG_KERNEL__
-		.byte	0
-#else
 		.byte	LOADED_HIGH
-#endif
 
 setup_move_size: .word  0x8000		# size to move, when setup is not
 					# loaded at 0x90000. We will move setup
@@ -157,11 +150,7 @@ setup_move_size: .word  0x8000		# size to move, when setup is not
 
 code32_start:				# here loaders can put a different
 					# start address for 32-bit code.
-#ifndef __BIG_KERNEL__
-		.long	0x1000		#   0x1000 = default for zImage
-#else
 		.long	0x100000	# 0x100000 = default for big kernel
-#endif
 
 ramdisk_image:	.long	0		# address of loaded ramdisk image
 					# Here the loader puts the 32-bit

arch/x86/boot/pm.c

@@ -32,47 +32,6 @@ static void realmode_switch_hook(void)
 	}
 }
 
-/*
- * A zImage kernel is loaded at 0x10000 but wants to run at 0x1000.
- * A bzImage kernel is loaded and runs at 0x100000.
- */
-static void move_kernel_around(void)
-{
-	/* Note: rely on the compile-time option here rather than
-	   the LOADED_HIGH flag.  The Qemu kernel loader unconditionally
-	   sets the loadflags to zero. */
-#ifndef __BIG_KERNEL__
-	u16 dst_seg, src_seg;
-	u32 syssize;
-
-	dst_seg =  0x1000 >> 4;
-	src_seg = 0x10000 >> 4;
-	syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraphs */
-
-	while (syssize) {
-		int paras  = (syssize >= 0x1000) ? 0x1000 : syssize;
-		int dwords = paras << 2;
-
-		asm volatile("pushw %%es ; "
-			     "pushw %%ds ; "
-			     "movw %1,%%es ; "
-			     "movw %2,%%ds ; "
-			     "xorw %%di,%%di ; "
-			     "xorw %%si,%%si ; "
-			     "rep;movsl ; "
-			     "popw %%ds ; "
-			     "popw %%es"
-			     : "+c" (dwords)
-			     : "r" (dst_seg), "r" (src_seg)
-			     : "esi", "edi");
-
-		syssize -= paras;
-		dst_seg += paras;
-		src_seg += paras;
-	}
-#endif
-}
-
 /*
  * Disable all interrupts at the legacy PIC.
  */
@@ -147,9 +106,6 @@ void go_to_protected_mode(void)
 	/* Hook before leaving real mode, also disables interrupts */
 	realmode_switch_hook();
 
-	/* Move the kernel/setup to their final resting places */
-	move_kernel_around();
-
 	/* Enable the A20 gate */
 	if (enable_a20()) {
 		puts("A20 gate not responding, unable to boot...\n");

arch/x86/boot/tools/build.c

@@ -130,7 +130,7 @@ static void die(const char * str, ...)
 
 static void usage(void)
 {
-	die("Usage: build [-b] setup system [rootdev] [> image]");
+	die("Usage: build setup system [rootdev] [> image]");
 }
 
 int main(int argc, char ** argv)
@@ -145,11 +145,6 @@ int main(int argc, char ** argv)
 	void *kernel;
 	u32 crc = 0xffffffffUL;
 
-	if (argc > 2 && !strcmp(argv[1], "-b"))
-	  {
-	    is_big_kernel = 1;
-	    argc--, argv++;
-	  }
 	if ((argc < 3) || (argc > 4))
 		usage();
 	if (argc > 3) {
@@ -216,8 +211,6 @@ int main(int argc, char ** argv)
 		die("Unable to mmap '%s': %m", argv[2]);
 	/* Number of 16-byte paragraphs, including space for a 4-byte CRC */
 	sys_size = (sz + 15 + 4) / 16;
-	if (!is_big_kernel && sys_size > DEF_SYSSIZE)
-		die("System is too big. Try using bzImage or modules.");
 
 	/* Patch the setup code with the appropriate size parameters */
 	buf[0x1f1] = setup_sectors-1;

arch/x86/include/asm/boot.h

@@ -1,10 +1,6 @@
 #ifndef _ASM_X86_BOOT_H
 #define _ASM_X86_BOOT_H
 
-/* Don't touch these, unless you really know what you're doing. */
-#define DEF_SYSSEG	0x1000
-#define DEF_SYSSIZE	0x7F00
-
 /* Internal svga startup constants */
 #define NORMAL_VGA	0xffff		/* 80x25 mode */
 #define EXTENDED_VGA	0xfffe		/* 80x50 mode */

arch/x86/include/asm/cpu_debug.h

@@ -0,0 +1,193 @@
+#ifndef _ASM_X86_CPU_DEBUG_H
+#define _ASM_X86_CPU_DEBUG_H
+
+/*
+ * CPU x86 architecture debug
+ *
+ * Copyright(C) 2009 Jaswinder Singh Rajput
+ */
+
+/* Register flags */
+enum cpu_debug_bit {
+/* Model Specific Registers (MSRs)					*/
+	CPU_MC_BIT,				/* Machine Check	*/
+	CPU_MONITOR_BIT,			/* Monitor		*/
+	CPU_TIME_BIT,				/* Time			*/
+	CPU_PMC_BIT,				/* Performance Monitor	*/
+	CPU_PLATFORM_BIT,			/* Platform		*/
+	CPU_APIC_BIT,				/* APIC			*/
+	CPU_POWERON_BIT,			/* Power-on		*/
+	CPU_CONTROL_BIT,			/* Control		*/
+	CPU_FEATURES_BIT,			/* Features control	*/
+	CPU_LBRANCH_BIT,			/* Last Branch		*/
+	CPU_BIOS_BIT,				/* BIOS			*/
+	CPU_FREQ_BIT,				/* Frequency		*/
+	CPU_MTTR_BIT,				/* MTRR			*/
+	CPU_PERF_BIT,				/* Performance		*/
+	CPU_CACHE_BIT,				/* Cache		*/
+	CPU_SYSENTER_BIT,			/* Sysenter		*/
+	CPU_THERM_BIT,				/* Thermal		*/
+	CPU_MISC_BIT,				/* Miscellaneous	*/
+	CPU_DEBUG_BIT,				/* Debug		*/
+	CPU_PAT_BIT,				/* PAT			*/
+	CPU_VMX_BIT,				/* VMX			*/
+	CPU_CALL_BIT,				/* System Call		*/
+	CPU_BASE_BIT,				/* BASE Address		*/
+	CPU_SMM_BIT,				/* System mgmt mode	*/
+	CPU_SVM_BIT,				/*Secure Virtual Machine*/
+	CPU_OSVM_BIT,				/* OS-Visible Workaround*/
+/* Standard Registers							*/
+	CPU_TSS_BIT,				/* Task Stack Segment	*/
+	CPU_CR_BIT,				/* Control Registers	*/
+	CPU_DT_BIT,				/* Descriptor Table	*/
+/* End of Registers flags						*/
+	CPU_REG_ALL_BIT,			/* Select all Registers	*/
+};
+
+#define	CPU_REG_ALL		(~0)		/* Select all Registers	*/
+
+#define	CPU_MC			(1 << CPU_MC_BIT)
+#define	CPU_MONITOR		(1 << CPU_MONITOR_BIT)
+#define	CPU_TIME		(1 << CPU_TIME_BIT)
+#define	CPU_PMC			(1 << CPU_PMC_BIT)
+#define	CPU_PLATFORM		(1 << CPU_PLATFORM_BIT)
+#define	CPU_APIC		(1 << CPU_APIC_BIT)
+#define	CPU_POWERON		(1 << CPU_POWERON_BIT)
+#define	CPU_CONTROL		(1 << CPU_CONTROL_BIT)
+#define	CPU_FEATURES		(1 << CPU_FEATURES_BIT)
+#define	CPU_LBRANCH		(1 << CPU_LBRANCH_BIT)
+#define	CPU_BIOS		(1 << CPU_BIOS_BIT)
+#define	CPU_FREQ		(1 << CPU_FREQ_BIT)
+#define	CPU_MTRR		(1 << CPU_MTTR_BIT)
+#define	CPU_PERF		(1 << CPU_PERF_BIT)
+#define	CPU_CACHE		(1 << CPU_CACHE_BIT)
+#define	CPU_SYSENTER		(1 << CPU_SYSENTER_BIT)
+#define	CPU_THERM		(1 << CPU_THERM_BIT)
+#define	CPU_MISC		(1 << CPU_MISC_BIT)
+#define	CPU_DEBUG		(1 << CPU_DEBUG_BIT)
+#define	CPU_PAT			(1 << CPU_PAT_BIT)
+#define	CPU_VMX			(1 << CPU_VMX_BIT)
+#define	CPU_CALL		(1 << CPU_CALL_BIT)
+#define	CPU_BASE		(1 << CPU_BASE_BIT)
+#define	CPU_SMM			(1 << CPU_SMM_BIT)
+#define	CPU_SVM			(1 << CPU_SVM_BIT)
+#define	CPU_OSVM		(1 << CPU_OSVM_BIT)
+#define	CPU_TSS			(1 << CPU_TSS_BIT)
+#define	CPU_CR			(1 << CPU_CR_BIT)
+#define	CPU_DT			(1 << CPU_DT_BIT)
+
+/* Register file flags */
+enum cpu_file_bit {
+	CPU_INDEX_BIT,				/* index		*/
+	CPU_VALUE_BIT,				/* value		*/
+};
+
+#define	CPU_FILE_VALUE			(1 << CPU_VALUE_BIT)
+
+/*
+ * DisplayFamily_DisplayModel	Processor Families/Processor Number Series
+ * --------------------------	------------------------------------------
+ * 05_01, 05_02, 05_04		Pentium, Pentium with MMX
+ *
+ * 06_01			Pentium Pro
+ * 06_03, 06_05			Pentium II Xeon, Pentium II
+ * 06_07, 06_08, 06_0A, 06_0B	Pentium III Xeon, Pentum III
+ *
+ * 06_09, 060D			Pentium M
+ *
+ * 06_0E			Core Duo, Core Solo
+ *
+ * 06_0F			Xeon 3000, 3200, 5100, 5300, 7300 series,
+ *				Core 2 Quad, Core 2 Extreme, Core 2 Duo,
+ *				Pentium dual-core
+ * 06_17			Xeon 5200, 5400 series, Core 2 Quad Q9650
+ *
+ * 06_1C			Atom
+ *
+ * 0F_00, 0F_01, 0F_02		Xeon, Xeon MP, Pentium 4
+ * 0F_03, 0F_04			Xeon, Xeon MP, Pentium 4, Pentium D
+ *
+ * 0F_06			Xeon 7100, 5000 Series, Xeon MP,
+ *				Pentium 4, Pentium D
+ */
+
+/* Register processors bits */
+enum cpu_processor_bit {
+	CPU_NONE,
+/* Intel */
+	CPU_INTEL_PENTIUM_BIT,
+	CPU_INTEL_P6_BIT,
+	CPU_INTEL_PENTIUM_M_BIT,
+	CPU_INTEL_CORE_BIT,
+	CPU_INTEL_CORE2_BIT,
+	CPU_INTEL_ATOM_BIT,
+	CPU_INTEL_XEON_P4_BIT,
+	CPU_INTEL_XEON_MP_BIT,
+};
+
+#define	CPU_ALL			(~0)		/* Select all CPUs	*/
+
+#define	CPU_INTEL_PENTIUM	(1 << CPU_INTEL_PENTIUM_BIT)
+#define	CPU_INTEL_P6		(1 << CPU_INTEL_P6_BIT)
+#define	CPU_INTEL_PENTIUM_M	(1 << CPU_INTEL_PENTIUM_M_BIT)
+#define	CPU_INTEL_CORE		(1 << CPU_INTEL_CORE_BIT)
+#define	CPU_INTEL_CORE2		(1 << CPU_INTEL_CORE2_BIT)
+#define	CPU_INTEL_ATOM		(1 << CPU_INTEL_ATOM_BIT)
+#define	CPU_INTEL_XEON_P4	(1 << CPU_INTEL_XEON_P4_BIT)
+#define	CPU_INTEL_XEON_MP	(1 << CPU_INTEL_XEON_MP_BIT)
+
+#define	CPU_INTEL_PX		(CPU_INTEL_P6 | CPU_INTEL_PENTIUM_M)
+#define	CPU_INTEL_COREX		(CPU_INTEL_CORE | CPU_INTEL_CORE2)
+#define	CPU_INTEL_XEON		(CPU_INTEL_XEON_P4 | CPU_INTEL_XEON_MP)
+#define	CPU_CO_AT		(CPU_INTEL_CORE | CPU_INTEL_ATOM)
+#define	CPU_C2_AT		(CPU_INTEL_CORE2 | CPU_INTEL_ATOM)
+#define	CPU_CX_AT		(CPU_INTEL_COREX | CPU_INTEL_ATOM)
+#define	CPU_CX_XE		(CPU_INTEL_COREX | CPU_INTEL_XEON)
+#define	CPU_P6_XE		(CPU_INTEL_P6 | CPU_INTEL_XEON)
+#define	CPU_PM_CO_AT		(CPU_INTEL_PENTIUM_M | CPU_CO_AT)
+#define	CPU_C2_AT_XE		(CPU_C2_AT | CPU_INTEL_XEON)
+#define	CPU_CX_AT_XE		(CPU_CX_AT | CPU_INTEL_XEON)
+#define	CPU_P6_CX_AT		(CPU_INTEL_P6 | CPU_CX_AT)
+#define	CPU_P6_CX_XE		(CPU_P6_XE | CPU_INTEL_COREX)
+#define	CPU_P6_CX_AT_XE		(CPU_INTEL_P6 | CPU_CX_AT_XE)
+#define	CPU_PM_CX_AT_XE		(CPU_INTEL_PENTIUM_M | CPU_CX_AT_XE)
+#define	CPU_PM_CX_AT		(CPU_INTEL_PENTIUM_M | CPU_CX_AT)
+#define	CPU_PM_CX_XE		(CPU_INTEL_PENTIUM_M | CPU_CX_XE)
+#define	CPU_PX_CX_AT		(CPU_INTEL_PX | CPU_CX_AT)
+#define	CPU_PX_CX_AT_XE		(CPU_INTEL_PX | CPU_CX_AT_XE)
+
+/* Select all Intel CPUs*/
+#define	CPU_INTEL_ALL		(CPU_INTEL_PENTIUM | CPU_PX_CX_AT_XE)
+
+#define MAX_CPU_FILES		512
+
+struct cpu_private {
+	unsigned		cpu;
+	unsigned		type;
+	unsigned		reg;
+	unsigned		file;
+};
+
+struct cpu_debug_base {
+	char			*name;		/* Register name	*/
+	unsigned		flag;		/* Register flag	*/
+};
+
+struct cpu_cpuX_base {
+	struct dentry		*dentry;	/* Register dentry	*/
+	int			init;		/* Register index file	*/
+};
+
+struct cpu_file_base {
+	char			*name;		/* Register file name	*/
+	unsigned		flag;		/* Register file flag	*/
+};
+
+struct cpu_debug_range {
+	unsigned		min;		/* Register range min	*/
+	unsigned		max;		/* Register range max	*/
+	unsigned		flag;		/* Supported flags	*/
+	unsigned		model;		/* Supported models	*/
+};
+
+#endif /* _ASM_X86_CPU_DEBUG_H */

arch/x86/include/asm/desc.h

@@ -91,7 +91,6 @@ static inline int desc_empty(const void *ptr)
 #define store_gdt(dtr) native_store_gdt(dtr)
 #define store_idt(dtr) native_store_idt(dtr)
 #define store_tr(tr) (tr = native_store_tr())
-#define store_ldt(ldt) asm("sldt %0":"=m" (ldt))
 
 #define load_TLS(t, cpu) native_load_tls(t, cpu)
 #define set_ldt native_set_ldt
@@ -112,6 +111,8 @@ static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
 }
 #endif	/* CONFIG_PARAVIRT */
 
+#define store_ldt(ldt) asm("sldt %0" : "=m"(ldt))
+
 static inline void native_write_idt_entry(gate_desc *idt, int entry,
 					  const gate_desc *gate)
 {

arch/x86/include/asm/ftrace.h

@@ -28,6 +28,13 @@
 
 #endif
 
+/* FIXME: I don't want to stay hardcoded */
+#ifdef CONFIG_X86_64
+# define FTRACE_SYSCALL_MAX     296
+#else
+# define FTRACE_SYSCALL_MAX     333
+#endif
+
 #ifdef CONFIG_FUNCTION_TRACER
 #define MCOUNT_ADDR		((long)(mcount))
 #define MCOUNT_INSN_SIZE	5 /* sizeof mcount call */

arch/x86/include/asm/highmem.h

@@ -63,6 +63,7 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot);
 void *kmap_atomic(struct page *page, enum km_type type);
 void kunmap_atomic(void *kvaddr, enum km_type type);
 void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 struct page *kmap_atomic_to_page(void *ptr);
 
 #ifndef CONFIG_PARAVIRT

arch/x86/include/asm/kexec.h

@@ -9,13 +9,13 @@
 # define PAGES_NR		4
 #else
 # define PA_CONTROL_PAGE	0
-# define PA_TABLE_PAGE		1
-# define PAGES_NR		2
+# define VA_CONTROL_PAGE	1
+# define PA_TABLE_PAGE		2
+# define PA_SWAP_PAGE		3
+# define PAGES_NR		4
 #endif
 
-#ifdef CONFIG_X86_32
 # define KEXEC_CONTROL_CODE_MAX_SIZE	2048
-#endif
 
 #ifndef __ASSEMBLY__
 
@@ -136,10 +136,11 @@ relocate_kernel(unsigned long indirection_page,
 		unsigned int has_pae,
 		unsigned int preserve_context);
 #else
-NORET_TYPE void
+unsigned long
 relocate_kernel(unsigned long indirection_page,
 		unsigned long page_list,
-		unsigned long start_address) ATTRIB_NORET;
+		unsigned long start_address,
+		unsigned int preserve_context);
 #endif
 
 #define ARCH_HAS_KIMAGE_ARCH

arch/x86/include/asm/linkage.h

@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_LINKAGE_H
 #define _ASM_X86_LINKAGE_H
 
+#include <linux/stringify.h>
+
 #undef notrace
 #define notrace __attribute__((no_instrument_function))
 
@@ -53,14 +55,9 @@
 	.globl name;	\
 	name:
 
-#ifdef CONFIG_X86_64
-#define __ALIGN .p2align 4,,15
-#define __ALIGN_STR ".p2align 4,,15"
-#endif
-
-#ifdef CONFIG_X86_ALIGNMENT_16
-#define __ALIGN .align 16,0x90
-#define __ALIGN_STR ".align 16,0x90"
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_ALIGNMENT_16)
+#define __ALIGN		.p2align 4, 0x90
+#define __ALIGN_STR	__stringify(__ALIGN)
 #endif
 
 #endif /* __ASSEMBLY__ */

arch/x86/kernel/Makefile

@@ -66,7 +66,8 @@ obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
 obj-y				+= apic/
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
-obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
+obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o

arch/x86/kernel/cpu/Makefile

@@ -14,6 +14,8 @@ obj-y			+= vmware.o hypervisor.o
 obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
 obj-$(CONFIG_X86_64)	+= bugs_64.o
 
+obj-$(CONFIG_X86_CPU_DEBUG)		+= cpu_debug.o
+
 obj-$(CONFIG_CPU_SUP_INTEL)		+= intel.o
 obj-$(CONFIG_CPU_SUP_AMD)		+= amd.o
 obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix.o

arch/x86/kernel/cpu/common.c

@@ -1078,8 +1078,7 @@ void __cpuinit cpu_init(void)
 
 	atomic_inc(&init_mm.mm_count);
 	me->active_mm = &init_mm;
-	if (me->mm)
-		BUG();
+	BUG_ON(me->mm);
 	enter_lazy_tlb(&init_mm, me);
 
 	load_sp0(t, &current->thread);
@@ -1145,8 +1144,7 @@ void __cpuinit cpu_init(void)
 	 */
 	atomic_inc(&init_mm.mm_count);
 	curr->active_mm = &init_mm;
-	if (curr->mm)
-		BUG();
+	BUG_ON(curr->mm);
 	enter_lazy_tlb(&init_mm, curr);
 
 	load_sp0(t, thread);

arch/x86/kernel/cpu/cpu_debug.c

@@ -0,0 +1,785 @@
+/*
+ * CPU x86 architecture debug code
+ *
+ * Copyright(C) 2009 Jaswinder Singh Rajput
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+
+#include <linux/interrupt.h>
+#include <linux/compiler.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/kprobes.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+
+#include <asm/cpu_debug.h>
+#include <asm/paravirt.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/apic.h>
+#include <asm/desc.h>
+
+static DEFINE_PER_CPU(struct cpu_cpuX_base, cpu_arr[CPU_REG_ALL_BIT]);
+static DEFINE_PER_CPU(struct cpu_private *, priv_arr[MAX_CPU_FILES]);
+static DEFINE_PER_CPU(unsigned, cpu_modelflag);
+static DEFINE_PER_CPU(int, cpu_priv_count);
+static DEFINE_PER_CPU(unsigned, cpu_model);
+
+static DEFINE_MUTEX(cpu_debug_lock);
+
+static struct dentry *cpu_debugfs_dir;
+
+static struct cpu_debug_base cpu_base[] = {
+	{ "mc",		CPU_MC		},	/* Machine Check	*/
+	{ "monitor",	CPU_MONITOR	},	/* Monitor		*/
+	{ "time",	CPU_TIME	},	/* Time			*/
+	{ "pmc",	CPU_PMC		},	/* Performance Monitor	*/
+	{ "platform",	CPU_PLATFORM	},	/* Platform		*/
+	{ "apic",	CPU_APIC	},	/* APIC			*/
+	{ "poweron",	CPU_POWERON	},	/* Power-on		*/
+	{ "control",	CPU_CONTROL	},	/* Control		*/
+	{ "features",	CPU_FEATURES	},	/* Features control	*/
+	{ "lastbranch",	CPU_LBRANCH	},	/* Last Branch		*/
+	{ "bios",	CPU_BIOS	},	/* BIOS			*/
+	{ "freq",	CPU_FREQ	},	/* Frequency		*/
+	{ "mtrr",	CPU_MTRR	},	/* MTRR			*/
+	{ "perf",	CPU_PERF	},	/* Performance		*/
+	{ "cache",	CPU_CACHE	},	/* Cache		*/
+	{ "sysenter",	CPU_SYSENTER	},	/* Sysenter		*/
+	{ "therm",	CPU_THERM	},	/* Thermal		*/
+	{ "misc",	CPU_MISC	},	/* Miscellaneous	*/
+	{ "debug",	CPU_DEBUG	},	/* Debug		*/
+	{ "pat",	CPU_PAT		},	/* PAT			*/
+	{ "vmx",	CPU_VMX		},	/* VMX			*/
+	{ "call",	CPU_CALL	},	/* System Call		*/
+	{ "base",	CPU_BASE	},	/* BASE Address		*/
+	{ "smm",	CPU_SMM		},	/* System mgmt mode	*/
+	{ "svm",	CPU_SVM		},	/*Secure Virtial Machine*/
+	{ "osvm",	CPU_OSVM	},	/* OS-Visible Workaround*/
+	{ "tss",	CPU_TSS		},	/* Task Stack Segment	*/
+	{ "cr",		CPU_CR		},	/* Control Registers	*/
+	{ "dt",		CPU_DT		},	/* Descriptor Table	*/
+	{ "registers",	CPU_REG_ALL	},	/* Select all Registers	*/
+};
+
+static struct cpu_file_base cpu_file[] = {
+	{ "index",	CPU_REG_ALL	},	/* index		*/
+	{ "value",	CPU_REG_ALL	},	/* value		*/
+};
+
+/* Intel Registers Range */
+static struct cpu_debug_range cpu_intel_range[] = {
+	{ 0x00000000, 0x00000001, CPU_MC,	CPU_INTEL_ALL		},
+	{ 0x00000006, 0x00000007, CPU_MONITOR,	CPU_CX_AT_XE		},
+	{ 0x00000010, 0x00000010, CPU_TIME,	CPU_INTEL_ALL		},
+	{ 0x00000011, 0x00000013, CPU_PMC,	CPU_INTEL_PENTIUM	},
+	{ 0x00000017, 0x00000017, CPU_PLATFORM,	CPU_PX_CX_AT_XE		},
+	{ 0x0000001B, 0x0000001B, CPU_APIC,	CPU_P6_CX_AT_XE		},
+
+	{ 0x0000002A, 0x0000002A, CPU_POWERON,	CPU_PX_CX_AT_XE		},
+	{ 0x0000002B, 0x0000002B, CPU_POWERON,	CPU_INTEL_XEON		},
+	{ 0x0000002C, 0x0000002C, CPU_FREQ,	CPU_INTEL_XEON		},
+	{ 0x0000003A, 0x0000003A, CPU_CONTROL,	CPU_CX_AT_XE		},
+
+	{ 0x00000040, 0x00000043, CPU_LBRANCH,	CPU_PM_CX_AT_XE		},
+	{ 0x00000044, 0x00000047, CPU_LBRANCH,	CPU_PM_CO_AT		},
+	{ 0x00000060, 0x00000063, CPU_LBRANCH,	CPU_C2_AT		},
+	{ 0x00000064, 0x00000067, CPU_LBRANCH,	CPU_INTEL_ATOM		},
+
+	{ 0x00000079, 0x00000079, CPU_BIOS,	CPU_P6_CX_AT_XE		},
+	{ 0x00000088, 0x0000008A, CPU_CACHE,	CPU_INTEL_P6		},
+	{ 0x0000008B, 0x0000008B, CPU_BIOS,	CPU_P6_CX_AT_XE		},
+	{ 0x0000009B, 0x0000009B, CPU_MONITOR,	CPU_INTEL_XEON		},
+
+	{ 0x000000C1, 0x000000C2, CPU_PMC,	CPU_P6_CX_AT		},
+	{ 0x000000CD, 0x000000CD, CPU_FREQ,	CPU_CX_AT		},
+	{ 0x000000E7, 0x000000E8, CPU_PERF,	CPU_CX_AT		},
+	{ 0x000000FE, 0x000000FE, CPU_MTRR,	CPU_P6_CX_XE		},
+
+	{ 0x00000116, 0x00000116, CPU_CACHE,	CPU_INTEL_P6		},
+	{ 0x00000118, 0x00000118, CPU_CACHE,	CPU_INTEL_P6		},
+	{ 0x00000119, 0x00000119, CPU_CACHE,	CPU_INTEL_PX		},
+	{ 0x0000011A, 0x0000011B, CPU_CACHE,	CPU_INTEL_P6		},
+	{ 0x0000011E, 0x0000011E, CPU_CACHE,	CPU_PX_CX_AT		},
+
+	{ 0x00000174, 0x00000176, CPU_SYSENTER,	CPU_P6_CX_AT_XE		},
+	{ 0x00000179, 0x0000017A, CPU_MC,	CPU_PX_CX_AT_XE		},
+	{ 0x0000017B, 0x0000017B, CPU_MC,	CPU_P6_XE		},
+	{ 0x00000186, 0x00000187, CPU_PMC,	CPU_P6_CX_AT		},
+	{ 0x00000198, 0x00000199, CPU_PERF,	CPU_PM_CX_AT_XE		},
+	{ 0x0000019A, 0x0000019A, CPU_TIME,	CPU_PM_CX_AT_XE		},
+	{ 0x0000019B, 0x0000019D, CPU_THERM,	CPU_PM_CX_AT_XE		},
+	{ 0x000001A0, 0x000001A0, CPU_MISC,	CPU_PM_CX_AT_XE		},
+
+	{ 0x000001C9, 0x000001C9, CPU_LBRANCH,	CPU_PM_CX_AT		},
+	{ 0x000001D7, 0x000001D8, CPU_LBRANCH,	CPU_INTEL_XEON		},
+	{ 0x000001D9, 0x000001D9, CPU_DEBUG,	CPU_CX_AT_XE		},
+	{ 0x000001DA, 0x000001DA, CPU_LBRANCH,	CPU_INTEL_XEON		},
+	{ 0x000001DB, 0x000001DB, CPU_LBRANCH,	CPU_P6_XE		},
+	{ 0x000001DC, 0x000001DC, CPU_LBRANCH,	CPU_INTEL_P6		},
+	{ 0x000001DD, 0x000001DE, CPU_LBRANCH,	CPU_PX_CX_AT_XE		},
+	{ 0x000001E0, 0x000001E0, CPU_LBRANCH,	CPU_INTEL_P6		},
+
+	{ 0x00000200, 0x0000020F, CPU_MTRR,	CPU_P6_CX_XE		},
+	{ 0x00000250, 0x00000250, CPU_MTRR,	CPU_P6_CX_XE		},
+	{ 0x00000258, 0x00000259, CPU_MTRR,	CPU_P6_CX_XE		},
+	{ 0x00000268, 0x0000026F, CPU_MTRR,	CPU_P6_CX_XE		},
+	{ 0x00000277, 0x00000277, CPU_PAT,	CPU_C2_AT_XE		},
+	{ 0x000002FF, 0x000002FF, CPU_MTRR,	CPU_P6_CX_XE		},
+
+	{ 0x00000300, 0x00000308, CPU_PMC,	CPU_INTEL_XEON		},
+	{ 0x00000309, 0x0000030B, CPU_PMC,	CPU_C2_AT_XE		},
+	{ 0x0000030C, 0x00000311, CPU_PMC,	CPU_INTEL_XEON		},
+	{ 0x00000345, 0x00000345, CPU_PMC,	CPU_C2_AT		},
+	{ 0x00000360, 0x00000371, CPU_PMC,	CPU_INTEL_XEON		},
+	{ 0x0000038D, 0x00000390, CPU_PMC,	CPU_C2_AT		},
+	{ 0x000003A0, 0x000003BE, CPU_PMC,	CPU_INTEL_XEON		},
+	{ 0x000003C0, 0x000003CD, CPU_PMC,	CPU_INTEL_XEON		},
+	{ 0x000003E0, 0x000003E1, CPU_PMC,	CPU_INTEL_XEON		},
+	{ 0x000003F0, 0x000003F0, CPU_PMC,	CPU_INTEL_XEON		},
+	{ 0x000003F1, 0x000003F1, CPU_PMC,	CPU_C2_AT_XE		},
+	{ 0x000003F2, 0x000003F2, CPU_PMC,	CPU_INTEL_XEON		},
+
+	{ 0x00000400, 0x00000402, CPU_MC,	CPU_PM_CX_AT_XE		},
+	{ 0x00000403, 0x00000403, CPU_MC,	CPU_INTEL_XEON		},
+	{ 0x00000404, 0x00000406, CPU_MC,	CPU_PM_CX_AT_XE		},
+	{ 0x00000407, 0x00000407, CPU_MC,	CPU_INTEL_XEON		},
+	{ 0x00000408, 0x0000040A, CPU_MC,	CPU_PM_CX_AT_XE		},
+	{ 0x0000040B, 0x0000040B, CPU_MC,	CPU_INTEL_XEON		},
+	{ 0x0000040C, 0x0000040E, CPU_MC,	CPU_PM_CX_XE		},
+	{ 0x0000040F, 0x0000040F, CPU_MC,	CPU_INTEL_XEON		},
+	{ 0x00000410, 0x00000412, CPU_MC,	CPU_PM_CX_AT_XE		},
+	{ 0x00000413, 0x00000417, CPU_MC,	CPU_CX_AT_XE		},
+	{ 0x00000480, 0x0000048B, CPU_VMX,	CPU_CX_AT_XE		},
+
+	{ 0x00000600, 0x00000600, CPU_DEBUG,	CPU_PM_CX_AT_XE		},
+	{ 0x00000680, 0x0000068F, CPU_LBRANCH,	CPU_INTEL_XEON		},
+	{ 0x000006C0, 0x000006CF, CPU_LBRANCH,	CPU_INTEL_XEON		},
+
+	{ 0x000107CC, 0x000107D3, CPU_PMC,	CPU_INTEL_XEON_MP	},
+
+	{ 0xC0000080, 0xC0000080, CPU_FEATURES,	CPU_INTEL_XEON		},
+	{ 0xC0000081, 0xC0000082, CPU_CALL,	CPU_INTEL_XEON		},
+	{ 0xC0000084, 0xC0000084, CPU_CALL,	CPU_INTEL_XEON		},
+	{ 0xC0000100, 0xC0000102, CPU_BASE,	CPU_INTEL_XEON		},
+};
+
+/* AMD Registers Range */
+static struct cpu_debug_range cpu_amd_range[] = {
+	{ 0x00000010, 0x00000010, CPU_TIME,	CPU_ALL,		},
+	{ 0x0000001B, 0x0000001B, CPU_APIC,	CPU_ALL,		},
+	{ 0x000000FE, 0x000000FE, CPU_MTRR,	CPU_ALL,		},
+
+	{ 0x00000174, 0x00000176, CPU_SYSENTER,	CPU_ALL,		},
+	{ 0x00000179, 0x0000017A, CPU_MC,	CPU_ALL,		},
+	{ 0x0000017B, 0x0000017B, CPU_MC,	CPU_ALL,		},
+	{ 0x000001D9, 0x000001D9, CPU_DEBUG,	CPU_ALL,		},
+	{ 0x000001DB, 0x000001DE, CPU_LBRANCH,	CPU_ALL,		},
+
+	{ 0x00000200, 0x0000020F, CPU_MTRR,	CPU_ALL,		},
+	{ 0x00000250, 0x00000250, CPU_MTRR,	CPU_ALL,		},
+	{ 0x00000258, 0x00000259, CPU_MTRR,	CPU_ALL,		},
+	{ 0x00000268, 0x0000026F, CPU_MTRR,	CPU_ALL,		},
+	{ 0x00000277, 0x00000277, CPU_PAT,	CPU_ALL,		},
+	{ 0x000002FF, 0x000002FF, CPU_MTRR,	CPU_ALL,		},
+
+	{ 0x00000400, 0x00000417, CPU_MC,	CPU_ALL,		},
+
+	{ 0xC0000080, 0xC0000080, CPU_FEATURES,	CPU_ALL,		},
+	{ 0xC0000081, 0xC0000084, CPU_CALL,	CPU_ALL,		},
+	{ 0xC0000100, 0xC0000102, CPU_BASE,	CPU_ALL,		},
+	{ 0xC0000103, 0xC0000103, CPU_TIME,	CPU_ALL,		},
+
+	{ 0xC0000408, 0xC000040A, CPU_MC,	CPU_ALL,		},
+
+	{ 0xc0010000, 0xc0010007, CPU_PMC,	CPU_ALL,		},
+	{ 0xc0010010, 0xc0010010, CPU_MTRR,	CPU_ALL,		},
+	{ 0xc0010016, 0xc001001A, CPU_MTRR,	CPU_ALL,		},
+	{ 0xc001001D, 0xc001001D, CPU_MTRR,	CPU_ALL,		},
+	{ 0xc0010030, 0xc0010035, CPU_BIOS,	CPU_ALL,		},
+	{ 0xc0010056, 0xc0010056, CPU_SMM,	CPU_ALL,		},
+	{ 0xc0010061, 0xc0010063, CPU_SMM,	CPU_ALL,		},
+	{ 0xc0010074, 0xc0010074, CPU_MC,	CPU_ALL,		},
+	{ 0xc0010111, 0xc0010113, CPU_SMM,	CPU_ALL,		},
+	{ 0xc0010114, 0xc0010118, CPU_SVM,	CPU_ALL,		},
+	{ 0xc0010119, 0xc001011A, CPU_SMM,	CPU_ALL,		},
+	{ 0xc0010140, 0xc0010141, CPU_OSVM,	CPU_ALL,		},
+	{ 0xc0010156, 0xc0010156, CPU_SMM,	CPU_ALL,		},
+};
+
+
+static int get_cpu_modelflag(unsigned cpu)
+{
+	int flag;
+
+	switch (per_cpu(cpu_model, cpu)) {
+	/* Intel */
+	case 0x0501:
+	case 0x0502:
+	case 0x0504:
+		flag = CPU_INTEL_PENTIUM;
+		break;
+	case 0x0601:
+	case 0x0603:
+	case 0x0605:
+	case 0x0607:
+	case 0x0608:
+	case 0x060A:
+	case 0x060B:
+		flag = CPU_INTEL_P6;
+		break;
+	case 0x0609:
+	case 0x060D:
+		flag = CPU_INTEL_PENTIUM_M;
+		break;
+	case 0x060E:
+		flag = CPU_INTEL_CORE;
+		break;
+	case 0x060F:
+	case 0x0617:
+		flag = CPU_INTEL_CORE2;
+		break;
+	case 0x061C:
+		flag = CPU_INTEL_ATOM;
+		break;
+	case 0x0F00:
+	case 0x0F01:
+	case 0x0F02:
+	case 0x0F03:
+	case 0x0F04:
+		flag = CPU_INTEL_XEON_P4;
+		break;
+	case 0x0F06:
+		flag = CPU_INTEL_XEON_MP;
+		break;
+	default:
+		flag = CPU_NONE;
+		break;
+	}
+
+	return flag;
+}
+
+static int get_cpu_range_count(unsigned cpu)
+{
+	int index;
+
+	switch (per_cpu(cpu_model, cpu) >> 16) {
+	case X86_VENDOR_INTEL:
+		index = ARRAY_SIZE(cpu_intel_range);
+		break;
+	case X86_VENDOR_AMD:
+		index = ARRAY_SIZE(cpu_amd_range);
+		break;
+	default:
+		index = 0;
+		break;
+	}
+
+	return index;
+}
+
+static int is_typeflag_valid(unsigned cpu, unsigned flag)
+{
+	unsigned vendor, modelflag;
+	int i, index;
+
+	/* Standard Registers should be always valid */
+	if (flag >= CPU_TSS)
+		return 1;
+
+	modelflag = per_cpu(cpu_modelflag, cpu);
+	vendor = per_cpu(cpu_model, cpu) >> 16;
+	index = get_cpu_range_count(cpu);
+
+	for (i = 0; i < index; i++) {
+		switch (vendor) {
+		case X86_VENDOR_INTEL:
+			if ((cpu_intel_range[i].model & modelflag) &&
+			    (cpu_intel_range[i].flag & flag))
+				return 1;
+			break;
+		case X86_VENDOR_AMD:
+			if (cpu_amd_range[i].flag & flag)
+				return 1;
+			break;
+		}
+	}
+
+	/* Invalid */
+	return 0;
+}
+
+static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max,
+			      int index, unsigned flag)
+{
+	unsigned modelflag;
+
+	modelflag = per_cpu(cpu_modelflag, cpu);
+	*max = 0;
+	switch (per_cpu(cpu_model, cpu) >> 16) {
+	case X86_VENDOR_INTEL:
+		if ((cpu_intel_range[index].model & modelflag) &&
+		    (cpu_intel_range[index].flag & flag)) {
+			*min = cpu_intel_range[index].min;
+			*max = cpu_intel_range[index].max;
+		}
+		break;
+	case X86_VENDOR_AMD:
+		if (cpu_amd_range[index].flag & flag) {
+			*min = cpu_amd_range[index].min;
+			*max = cpu_amd_range[index].max;
+		}
+		break;
+	}
+
+	return *max;
+}
+
+/* This function can also be called with seq = NULL for printk */
+static void print_cpu_data(struct seq_file *seq, unsigned type,
+			   u32 low, u32 high)
+{
+	struct cpu_private *priv;
+	u64 val = high;
+
+	if (seq) {
+		priv = seq->private;
+		if (priv->file) {
+			val = (val << 32) | low;
+			seq_printf(seq, "0x%llx\n", val);
+		} else
+			seq_printf(seq, " %08x: %08x_%08x\n",
+				   type, high, low);
+	} else
+		printk(KERN_INFO " %08x: %08x_%08x\n", type, high, low);
+}
+
+/* This function can also be called with seq = NULL for printk */
+static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag)
+{
+	unsigned msr, msr_min, msr_max;
+	struct cpu_private *priv;
+	u32 low, high;
+	int i, range;
+
+	if (seq) {
+		priv = seq->private;
+		if (priv->file) {
+			if (!rdmsr_safe_on_cpu(priv->cpu, priv->reg,
+					       &low, &high))
+				print_cpu_data(seq, priv->reg, low, high);
+			return;
+		}
+	}
+
+	range = get_cpu_range_count(cpu);
+
+	for (i = 0; i < range; i++) {
+		if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag))
+			continue;
+
+		for (msr = msr_min; msr <= msr_max; msr++) {
+			if (rdmsr_safe_on_cpu(cpu, msr, &low, &high))
+				continue;
+			print_cpu_data(seq, msr, low, high);
+		}
+	}
+}
+
+static void print_tss(void *arg)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+	struct seq_file *seq = arg;
+	unsigned int seg;
+
+	seq_printf(seq, " RAX\t: %016lx\n", regs->ax);
+	seq_printf(seq, " RBX\t: %016lx\n", regs->bx);
+	seq_printf(seq, " RCX\t: %016lx\n", regs->cx);
+	seq_printf(seq, " RDX\t: %016lx\n", regs->dx);
+
+	seq_printf(seq, " RSI\t: %016lx\n", regs->si);
+	seq_printf(seq, " RDI\t: %016lx\n", regs->di);
+	seq_printf(seq, " RBP\t: %016lx\n", regs->bp);
+	seq_printf(seq, " ESP\t: %016lx\n", regs->sp);
+
+#ifdef CONFIG_X86_64
+	seq_printf(seq, " R08\t: %016lx\n", regs->r8);
+	seq_printf(seq, " R09\t: %016lx\n", regs->r9);
+	seq_printf(seq, " R10\t: %016lx\n", regs->r10);
+	seq_printf(seq, " R11\t: %016lx\n", regs->r11);
+	seq_printf(seq, " R12\t: %016lx\n", regs->r12);
+	seq_printf(seq, " R13\t: %016lx\n", regs->r13);
+	seq_printf(seq, " R14\t: %016lx\n", regs->r14);
+	seq_printf(seq, " R15\t: %016lx\n", regs->r15);
+#endif
+
+	asm("movl %%cs,%0" : "=r" (seg));
+	seq_printf(seq, " CS\t:             %04x\n", seg);
+	asm("movl %%ds,%0" : "=r" (seg));
+	seq_printf(seq, " DS\t:             %04x\n", seg);
+	seq_printf(seq, " SS\t:             %04lx\n", regs->ss & 0xffff);
+	asm("movl %%es,%0" : "=r" (seg));
+	seq_printf(seq, " ES\t:             %04x\n", seg);
+	asm("movl %%fs,%0" : "=r" (seg));
+	seq_printf(seq, " FS\t:             %04x\n", seg);
+	asm("movl %%gs,%0" : "=r" (seg));
+	seq_printf(seq, " GS\t:             %04x\n", seg);
+
+	seq_printf(seq, " EFLAGS\t: %016lx\n", regs->flags);
+
+	seq_printf(seq, " EIP\t: %016lx\n", regs->ip);
+}
+
+static void print_cr(void *arg)
+{
+	struct seq_file *seq = arg;
+
+	seq_printf(seq, " cr0\t: %016lx\n", read_cr0());
+	seq_printf(seq, " cr2\t: %016lx\n", read_cr2());
+	seq_printf(seq, " cr3\t: %016lx\n", read_cr3());
+	seq_printf(seq, " cr4\t: %016lx\n", read_cr4_safe());
+#ifdef CONFIG_X86_64
+	seq_printf(seq, " cr8\t: %016lx\n", read_cr8());
+#endif
+}
+
+static void print_desc_ptr(char *str, struct seq_file *seq, struct desc_ptr dt)
+{
+	seq_printf(seq, " %s\t: %016llx\n", str, (u64)(dt.address | dt.size));
+}
+
+static void print_dt(void *seq)
+{
+	struct desc_ptr dt;
+	unsigned long ldt;
+
+	/* IDT */
+	store_idt((struct desc_ptr *)&dt);
+	print_desc_ptr("IDT", seq, dt);
+
+	/* GDT */
+	store_gdt((struct desc_ptr *)&dt);
+	print_desc_ptr("GDT", seq, dt);
+
+	/* LDT */
+	store_ldt(ldt);
+	seq_printf(seq, " LDT\t: %016lx\n", ldt);
+
+	/* TR */
+	store_tr(ldt);
+	seq_printf(seq, " TR\t: %016lx\n", ldt);
+}
+
+static void print_dr(void *arg)
+{
+	struct seq_file *seq = arg;
+	unsigned long dr;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		/* Ignore db4, db5 */
+		if ((i == 4) || (i == 5))
+			continue;
+		get_debugreg(dr, i);
+		seq_printf(seq, " dr%d\t: %016lx\n", i, dr);
+	}
+
+	seq_printf(seq, "\n MSR\t:\n");
+}
+
+static void print_apic(void *arg)
+{
+	struct seq_file *seq = arg;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	seq_printf(seq, " LAPIC\t:\n");
+	seq_printf(seq, " ID\t\t: %08x\n",  apic_read(APIC_ID) >> 24);
+	seq_printf(seq, " LVR\t\t: %08x\n",  apic_read(APIC_LVR));
+	seq_printf(seq, " TASKPRI\t: %08x\n",  apic_read(APIC_TASKPRI));
+	seq_printf(seq, " ARBPRI\t\t: %08x\n",  apic_read(APIC_ARBPRI));
+	seq_printf(seq, " PROCPRI\t: %08x\n",  apic_read(APIC_PROCPRI));
+	seq_printf(seq, " LDR\t\t: %08x\n",  apic_read(APIC_LDR));
+	seq_printf(seq, " DFR\t\t: %08x\n",  apic_read(APIC_DFR));
+	seq_printf(seq, " SPIV\t\t: %08x\n",  apic_read(APIC_SPIV));
+	seq_printf(seq, " ISR\t\t: %08x\n",  apic_read(APIC_ISR));
+	seq_printf(seq, " ESR\t\t: %08x\n",  apic_read(APIC_ESR));
+	seq_printf(seq, " ICR\t\t: %08x\n",  apic_read(APIC_ICR));
+	seq_printf(seq, " ICR2\t\t: %08x\n",  apic_read(APIC_ICR2));
+	seq_printf(seq, " LVTT\t\t: %08x\n",  apic_read(APIC_LVTT));
+	seq_printf(seq, " LVTTHMR\t: %08x\n",  apic_read(APIC_LVTTHMR));
+	seq_printf(seq, " LVTPC\t\t: %08x\n",  apic_read(APIC_LVTPC));
+	seq_printf(seq, " LVT0\t\t: %08x\n",  apic_read(APIC_LVT0));
+	seq_printf(seq, " LVT1\t\t: %08x\n",  apic_read(APIC_LVT1));
+	seq_printf(seq, " LVTERR\t\t: %08x\n",  apic_read(APIC_LVTERR));
+	seq_printf(seq, " TMICT\t\t: %08x\n",  apic_read(APIC_TMICT));
+	seq_printf(seq, " TMCCT\t\t: %08x\n",  apic_read(APIC_TMCCT));
+	seq_printf(seq, " TDCR\t\t: %08x\n",  apic_read(APIC_TDCR));
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+	seq_printf(seq, "\n MSR\t:\n");
+}
+
+static int cpu_seq_show(struct seq_file *seq, void *v)
+{
+	struct cpu_private *priv = seq->private;
+
+	if (priv == NULL)
+		return -EINVAL;
+
+	switch (cpu_base[priv->type].flag) {
+	case CPU_TSS:
+		smp_call_function_single(priv->cpu, print_tss, seq, 1);
+		break;
+	case CPU_CR:
+		smp_call_function_single(priv->cpu, print_cr, seq, 1);
+		break;
+	case CPU_DT:
+		smp_call_function_single(priv->cpu, print_dt, seq, 1);
+		break;
+	case CPU_DEBUG:
+		if (priv->file == CPU_INDEX_BIT)
+			smp_call_function_single(priv->cpu, print_dr, seq, 1);
+		print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
+		break;
+	case CPU_APIC:
+		if (priv->file == CPU_INDEX_BIT)
+			smp_call_function_single(priv->cpu, print_apic, seq, 1);
+		print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
+		break;
+
+	default:
+		print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
+		break;
+	}
+	seq_printf(seq, "\n");
+
+	return 0;
+}
+
+static void *cpu_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	if (*pos == 0) /* One time is enough ;-) */
+		return seq;
+
+	return NULL;
+}
+
+static void *cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	(*pos)++;
+
+	return cpu_seq_start(seq, pos);
+}
+
+static void cpu_seq_stop(struct seq_file *seq, void *v)
+{
+}
+
+static const struct seq_operations cpu_seq_ops = {
+	.start		= cpu_seq_start,
+	.next		= cpu_seq_next,
+	.stop		= cpu_seq_stop,
+	.show		= cpu_seq_show,
+};
+
+static int cpu_seq_open(struct inode *inode, struct file *file)
+{
+	struct cpu_private *priv = inode->i_private;
+	struct seq_file *seq;
+	int err;
+
+	err = seq_open(file, &cpu_seq_ops);
+	if (!err) {
+		seq = file->private_data;
+		seq->private = priv;
+	}
+
+	return err;
+}
+
+static const struct file_operations cpu_fops = {
+	.open		= cpu_seq_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg,
+			   unsigned file, struct dentry *dentry)
+{
+	struct cpu_private *priv = NULL;
+
+	/* Already intialized */
+	if (file == CPU_INDEX_BIT)
+		if (per_cpu(cpu_arr[type].init, cpu))
+			return 0;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
+
+	priv->cpu = cpu;
+	priv->type = type;
+	priv->reg = reg;
+	priv->file = file;
+	mutex_lock(&cpu_debug_lock);
+	per_cpu(priv_arr[type], cpu) = priv;
+	per_cpu(cpu_priv_count, cpu)++;
+	mutex_unlock(&cpu_debug_lock);
+
+	if (file)
+		debugfs_create_file(cpu_file[file].name, S_IRUGO,
+				    dentry, (void *)priv, &cpu_fops);
+	else {
+		debugfs_create_file(cpu_base[type].name, S_IRUGO,
+				    per_cpu(cpu_arr[type].dentry, cpu),
+				    (void *)priv, &cpu_fops);
+		mutex_lock(&cpu_debug_lock);
+		per_cpu(cpu_arr[type].init, cpu) = 1;
+		mutex_unlock(&cpu_debug_lock);
+	}
+
+	return 0;
+}
+
+static int cpu_init_regfiles(unsigned cpu, unsigned int type, unsigned reg,
+			     struct dentry *dentry)
+{
+	unsigned file;
+	int err = 0;
+
+	for (file = 0; file <  ARRAY_SIZE(cpu_file); file++) {
+		err = cpu_create_file(cpu, type, reg, file, dentry);
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+static int cpu_init_msr(unsigned cpu, unsigned type, struct dentry *dentry)
+{
+	struct dentry *cpu_dentry = NULL;
+	unsigned reg, reg_min, reg_max;
+	int i, range, err = 0;
+	char reg_dir[12];
+	u32 low, high;
+
+	range = get_cpu_range_count(cpu);
+
+	for (i = 0; i < range; i++) {
+		if (!get_cpu_range(cpu, &reg_min, &reg_max, i,
+				   cpu_base[type].flag))
+			continue;
+
+		for (reg = reg_min; reg <= reg_max; reg++) {
+			if (rdmsr_safe_on_cpu(cpu, reg, &low, &high))
+				continue;
+
+			sprintf(reg_dir, "0x%x", reg);
+			cpu_dentry = debugfs_create_dir(reg_dir, dentry);
+			err = cpu_init_regfiles(cpu, type, reg, cpu_dentry);
+			if (err)
+				return err;
+		}
+	}
+
+	return err;
+}
+
+static int cpu_init_allreg(unsigned cpu, struct dentry *dentry)
+{
+	struct dentry *cpu_dentry = NULL;
+	unsigned type;
+	int err = 0;
+
+	for (type = 0; type <  ARRAY_SIZE(cpu_base) - 1; type++) {
+		if (!is_typeflag_valid(cpu, cpu_base[type].flag))
+			continue;
+		cpu_dentry = debugfs_create_dir(cpu_base[type].name, dentry);
+		per_cpu(cpu_arr[type].dentry, cpu) = cpu_dentry;
+
+		if (type < CPU_TSS_BIT)
+			err = cpu_init_msr(cpu, type, cpu_dentry);
+		else
+			err = cpu_create_file(cpu, type, 0, CPU_INDEX_BIT,
+					      cpu_dentry);
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+static int cpu_init_cpu(void)
+{
+	struct dentry *cpu_dentry = NULL;
+	struct cpuinfo_x86 *cpui;
+	char cpu_dir[12];
+	unsigned cpu;
+	int err = 0;
+
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
+		cpui = &cpu_data(cpu);
+		if (!cpu_has(cpui, X86_FEATURE_MSR))
+			continue;
+		per_cpu(cpu_model, cpu) = ((cpui->x86_vendor << 16) |
+					   (cpui->x86 << 8) |
+					   (cpui->x86_model));
+		per_cpu(cpu_modelflag, cpu) = get_cpu_modelflag(cpu);
+
+		sprintf(cpu_dir, "cpu%d", cpu);
+		cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir);
+		err = cpu_init_allreg(cpu, cpu_dentry);
+
+		pr_info("cpu%d(%d) debug files %d\n",
+			cpu, nr_cpu_ids, per_cpu(cpu_priv_count, cpu));
+		if (per_cpu(cpu_priv_count, cpu) > MAX_CPU_FILES) {
+			pr_err("Register files count %d exceeds limit %d\n",
+				per_cpu(cpu_priv_count, cpu), MAX_CPU_FILES);
+			per_cpu(cpu_priv_count, cpu) = MAX_CPU_FILES;
+			err = -ENFILE;
+		}
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+static int __init cpu_debug_init(void)
+{
+	cpu_debugfs_dir = debugfs_create_dir("cpu", arch_debugfs_dir);
+
+	return cpu_init_cpu();
+}
+
+static void __exit cpu_debug_exit(void)
+{
+	int i, cpu;
+
+	if (cpu_debugfs_dir)
+		debugfs_remove_recursive(cpu_debugfs_dir);
+
+	for (cpu = 0; cpu <  nr_cpu_ids; cpu++)
+		for (i = 0; i < per_cpu(cpu_priv_count, cpu); i++)
+			kfree(per_cpu(priv_arr[i], cpu));
+}
+
+module_init(cpu_debug_init);
+module_exit(cpu_debug_exit);
+
+MODULE_AUTHOR("Jaswinder Singh Rajput");
+MODULE_DESCRIPTION("CPU Debug module");
+MODULE_LICENSE("GPL");

arch/x86/kernel/cpu/mcheck/mce_64.c

@@ -639,7 +639,7 @@ static void mce_init_timer(void)
 	if (!next_interval)
 		return;
 	setup_timer(t, mcheck_timer, smp_processor_id());
-	t->expires = round_jiffies_relative(jiffies + next_interval);
+	t->expires = round_jiffies(jiffies + next_interval);
 	add_timer(t);
 }
 
@@ -1110,7 +1110,7 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
 		break;
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
-		t->expires = round_jiffies_relative(jiffies + next_interval);
+		t->expires = round_jiffies(jiffies + next_interval);
 		add_timer_on(t, cpu);
 		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
 		break;

arch/x86/kernel/entry_32.S

@@ -442,8 +442,7 @@ sysenter_past_esp:
 
 	GET_THREAD_INFO(%ebp)
 
-	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
 	jnz sysenter_audit
 sysenter_do_call:
 	cmpl $(nr_syscalls), %eax
@@ -454,7 +453,7 @@ sysenter_do_call:
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
-	testw $_TIF_ALLWORK_MASK, %cx
+	testl $_TIF_ALLWORK_MASK, %ecx
 	jne sysexit_audit
 sysenter_exit:
 /* if something modifies registers it must also disable sysexit */
@@ -468,7 +467,7 @@ sysenter_exit:
 
 #ifdef CONFIG_AUDITSYSCALL
 sysenter_audit:
-	testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
 	jnz syscall_trace_entry
 	addl $4,%esp
 	CFI_ADJUST_CFA_OFFSET -4
@@ -485,7 +484,7 @@ sysenter_audit:
 	jmp sysenter_do_call
 
 sysexit_audit:
-	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
 	jne syscall_exit_work
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_ANY)
@@ -498,7 +497,7 @@ sysexit_audit:
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
-	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
 	jne syscall_exit_work
 	movl PT_EAX(%esp),%eax	/* reload syscall return value */
 	jmp sysenter_exit
@@ -523,8 +522,7 @@ ENTRY(system_call)
 	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 					# system call tracing in operation / emulation
-	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
 	jnz syscall_trace_entry
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
@@ -538,7 +536,7 @@ syscall_exit:
 					# between sampling and the iret
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
-	testw $_TIF_ALLWORK_MASK, %cx	# current->work
+	testl $_TIF_ALLWORK_MASK, %ecx	# current->work
 	jne syscall_exit_work
 
 restore_all:
@@ -673,7 +671,7 @@ END(syscall_trace_entry)
 	# perform syscall exit tracing
 	ALIGN
 syscall_exit_work:
-	testb $_TIF_WORK_SYSCALL_EXIT, %cl
+	testl $_TIF_WORK_SYSCALL_EXIT, %ecx
 	jz work_pending
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_ANY)	# could let syscall_trace_leave() call

arch/x86/kernel/entry_64.S

@@ -368,6 +368,7 @@ ENTRY(save_rest)
 END(save_rest)
 
 /* save complete stack frame */
+	.pushsection .kprobes.text, "ax"
 ENTRY(save_paranoid)
 	XCPT_FRAME 1 RDI+8
 	cld
@@ -396,6 +397,7 @@ ENTRY(save_paranoid)
 1:	ret
 	CFI_ENDPROC
 END(save_paranoid)
+	.popsection
 
 /*
  * A newly forked process directly context switches into this address.
@@ -416,7 +418,6 @@ ENTRY(ret_from_fork)
 
 	GET_THREAD_INFO(%rcx)
 
-	CFI_REMEMBER_STATE
 	RESTORE_REST
 
 	testl $3, CS-ARGOFFSET(%rsp)		# from kernel_thread?
@@ -428,7 +429,6 @@ ENTRY(ret_from_fork)
 	RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
 	jmp ret_from_sys_call			# go to the SYSRET fastpath
 
-	CFI_RESTORE_STATE
 	CFI_ENDPROC
 END(ret_from_fork)
 

arch/x86/kernel/ftrace.c

@@ -453,3 +453,66 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 	}
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+extern unsigned long __start_syscalls_metadata[];
+extern unsigned long __stop_syscalls_metadata[];
+extern unsigned long *sys_call_table;
+
+static struct syscall_metadata **syscalls_metadata;
+
+static struct syscall_metadata *find_syscall_meta(unsigned long *syscall)
+{
+	struct syscall_metadata *start;
+	struct syscall_metadata *stop;
+	char str[KSYM_SYMBOL_LEN];
+
+
+	start = (struct syscall_metadata *)__start_syscalls_metadata;
+	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
+	kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str);
+
+	for ( ; start < stop; start++) {
+		if (start->name && !strcmp(start->name, str))
+			return start;
+	}
+	return NULL;
+}
+
+struct syscall_metadata *syscall_nr_to_meta(int nr)
+{
+	if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0)
+		return NULL;
+
+	return syscalls_metadata[nr];
+}
+
+void arch_init_ftrace_syscalls(void)
+{
+	int i;
+	struct syscall_metadata *meta;
+	unsigned long **psys_syscall_table = &sys_call_table;
+	static atomic_t refs;
+
+	if (atomic_inc_return(&refs) != 1)
+		goto end;
+
+	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
+					FTRACE_SYSCALL_MAX, GFP_KERNEL);
+	if (!syscalls_metadata) {
+		WARN_ON(1);
+		return;
+	}
+
+	for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
+		meta = find_syscall_meta(psys_syscall_table[i]);
+		syscalls_metadata[i] = meta;
+	}
+	return;
+
+	/* Paranoid: avoid overflow */
+end:
+	atomic_dec(&refs);
+}
+#endif

arch/x86/kernel/machine_kexec_32.c

@@ -14,12 +14,12 @@
 #include <linux/ftrace.h>
 #include <linux/suspend.h>
 #include <linux/gfp.h>
+#include <linux/io.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
-#include <asm/io.h>
 #include <asm/apic.h>
 #include <asm/cpufeature.h>
 #include <asm/desc.h>
@@ -63,7 +63,7 @@ static void load_segments(void)
 		"\tmovl %%eax,%%fs\n"
 		"\tmovl %%eax,%%gs\n"
 		"\tmovl %%eax,%%ss\n"
-		::: "eax", "memory");
+		: : : "eax", "memory");
 #undef STR
 #undef __STR
 }
@@ -205,7 +205,8 @@ void machine_kexec(struct kimage *image)
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
-		/* We need to put APICs in legacy mode so that we can
+		/*
+		 * We need to put APICs in legacy mode so that we can
 		 * get timer interrupts in second kernel. kexec/kdump
 		 * paths already have calls to disable_IO_APIC() in
 		 * one form or other. kexec jump path also need
@@ -227,7 +228,8 @@ void machine_kexec(struct kimage *image)
 		page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page)
 						<< PAGE_SHIFT);
 
-	/* The segment registers are funny things, they have both a
+	/*
+	 * The segment registers are funny things, they have both a
 	 * visible and an invisible part.  Whenever the visible part is
 	 * set to a specific selector, the invisible part is loaded
 	 * with from a table in memory.  At no other time is the
@@ -237,11 +239,12 @@ void machine_kexec(struct kimage *image)
 	 * segments, before I zap the gdt with an invalid value.
 	 */
 	load_segments();
-	/* The gdt & idt are now invalid.
+	/*
+	 * The gdt & idt are now invalid.
 	 * If you want to load them you must set up your own idt & gdt.
 	 */
-	set_gdt(phys_to_virt(0),0);
-	set_idt(phys_to_virt(0),0);
+	set_gdt(phys_to_virt(0), 0);
+	set_idt(phys_to_virt(0), 0);
 
 	/* now call it */
 	image->start = relocate_kernel_ptr((unsigned long)image->head,

arch/x86/kernel/machine_kexec_64.c

@@ -12,11 +12,47 @@
 #include <linux/reboot.h>
 #include <linux/numa.h>
 #include <linux/ftrace.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
-#include <asm/io.h>
+
+static int init_one_level2_page(struct kimage *image, pgd_t *pgd,
+				unsigned long addr)
+{
+	pud_t *pud;
+	pmd_t *pmd;
+	struct page *page;
+	int result = -ENOMEM;
+
+	addr &= PMD_MASK;
+	pgd += pgd_index(addr);
+	if (!pgd_present(*pgd)) {
+		page = kimage_alloc_control_pages(image, 0);
+		if (!page)
+			goto out;
+		pud = (pud_t *)page_address(page);
+		memset(pud, 0, PAGE_SIZE);
+		set_pgd(pgd, __pgd(__pa(pud) | _KERNPG_TABLE));
+	}
+	pud = pud_offset(pgd, addr);
+	if (!pud_present(*pud)) {
+		page = kimage_alloc_control_pages(image, 0);
+		if (!page)
+			goto out;
+		pmd = (pmd_t *)page_address(page);
+		memset(pmd, 0, PAGE_SIZE);
+		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
+	}
+	pmd = pmd_offset(pud, addr);
+	if (!pmd_present(*pmd))
+		set_pmd(pmd, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC));
+	result = 0;
+out:
+	return result;
+}
 
 static void init_level2_page(pmd_t *level2p, unsigned long addr)
 {
@@ -83,9 +119,8 @@ static int init_level4_page(struct kimage *image, pgd_t *level4p,
 		}
 		level3p = (pud_t *)page_address(page);
 		result = init_level3_page(image, level3p, addr, last_addr);
-		if (result) {
+		if (result)
 			goto out;
-		}
 		set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE));
 		addr += PGDIR_SIZE;
 	}
@@ -154,6 +189,13 @@ static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
 	int result;
 	level4p = (pgd_t *)__va(start_pgtable);
 	result = init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT);
+	if (result)
+		return result;
+	/*
+	 * image->start may be outside 0 ~ max_pfn, for example when
+	 * jump back to original kernel from kexeced kernel
+	 */
+	result = init_one_level2_page(image, level4p, image->start);
 	if (result)
 		return result;
 	return init_transition_pgtable(image, level4p);
@@ -229,20 +271,45 @@ void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
+	int save_ftrace_enabled;
 
-	tracer_disable();
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		save_processor_state();
+#endif
+
+	save_ftrace_enabled = __ftrace_enabled_save();
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
+	if (image->preserve_context) {
+#ifdef CONFIG_X86_IO_APIC
+		/*
+		 * We need to put APICs in legacy mode so that we can
+		 * get timer interrupts in second kernel. kexec/kdump
+		 * paths already have calls to disable_IO_APIC() in
+		 * one form or other. kexec jump path also need
+		 * one.
+		 */
+		disable_IO_APIC();
+#endif
+	}
+
 	control_page = page_address(image->control_code_page) + PAGE_SIZE;
-	memcpy(control_page, relocate_kernel, PAGE_SIZE);
+	memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
 
 	page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page);
+	page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
 	page_list[PA_TABLE_PAGE] =
 	  (unsigned long)__pa(page_address(image->control_code_page));
 
-	/* The segment registers are funny things, they have both a
+	if (image->type == KEXEC_TYPE_DEFAULT)
+		page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page)
+						<< PAGE_SHIFT);
+
+	/*
+	 * The segment registers are funny things, they have both a
 	 * visible and an invisible part.  Whenever the visible part is
 	 * set to a specific selector, the invisible part is loaded
 	 * with from a table in memory.  At no other time is the
@@ -252,15 +319,25 @@ void machine_kexec(struct kimage *image)
 	 * segments, before I zap the gdt with an invalid value.
 	 */
 	load_segments();
-	/* The gdt & idt are now invalid.
+	/*
+	 * The gdt & idt are now invalid.
 	 * If you want to load them you must set up your own idt & gdt.
 	 */
-	set_gdt(phys_to_virt(0),0);
-	set_idt(phys_to_virt(0),0);
+	set_gdt(phys_to_virt(0), 0);
+	set_idt(phys_to_virt(0), 0);
 
 	/* now call it */
-	relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
-			image->start);
+	image->start = relocate_kernel((unsigned long)image->head,
+				       (unsigned long)page_list,
+				       image->start,
+				       image->preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		restore_processor_state();
+#endif
+
+	__ftrace_enabled_restore(save_ftrace_enabled);
 }
 
 void arch_crash_save_vmcoreinfo(void)

arch/x86/kernel/quirks.c

@@ -74,8 +74,7 @@ static void ich_force_hpet_resume(void)
 	if (!force_hpet_address)
 		return;
 
-	if (rcba_base == NULL)
-		BUG();
+	BUG_ON(rcba_base == NULL);
 
 	/* read the Function Disable register, dword mode only */
 	val = readl(rcba_base + 0x3404);

arch/x86/kernel/relocate_kernel_32.S

@@ -17,7 +17,8 @@
 
 #define PTR(x) (x << 2)
 
-/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+/*
+ * control_page + KEXEC_CONTROL_CODE_MAX_SIZE
  * ~ control_page + PAGE_SIZE are used as data storage and stack for
  * jumping back
  */
@@ -76,8 +77,10 @@ relocate_kernel:
 	movl	%eax, CP_PA_SWAP_PAGE(%edi)
 	movl	%ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
 
-	/* get physical address of control page now */
-	/* this is impossible after page table switch */
+	/*
+	 * get physical address of control page now
+	 * this is impossible after page table switch
+	 */
 	movl	PTR(PA_CONTROL_PAGE)(%ebp), %edi
 
 	/* switch to new set of page tables */
@@ -97,7 +100,8 @@ identity_mapped:
 	/* store the start address on the stack */
 	pushl   %edx
 
-	/* Set cr0 to a known state:
+	/*
+	 * Set cr0 to a known state:
 	 *  - Paging disabled
 	 *  - Alignment check disabled
 	 *  - Write protect disabled
@@ -113,7 +117,8 @@ identity_mapped:
 	/* clear cr4 if applicable */
 	testl	%ecx, %ecx
 	jz	1f
-	/* Set cr4 to a known state:
+	/*
+	 * Set cr4 to a known state:
 	 * Setting everything to zero seems safe.
 	 */
 	xorl	%eax, %eax
@@ -132,15 +137,18 @@ identity_mapped:
 	call	swap_pages
 	addl	$8, %esp
 
-	/* To be certain of avoiding problems with self-modifying code
+	/*
+	 * To be certain of avoiding problems with self-modifying code
 	 * I need to execute a serializing instruction here.
 	 * So I flush the TLB, it's handy, and not processor dependent.
 	 */
 	xorl	%eax, %eax
 	movl	%eax, %cr3
 
-	/* set all of the registers to known values */
-	/* leave %esp alone */
+	/*
+	 * set all of the registers to known values
+	 * leave %esp alone
+	 */
 
 	testl	%esi, %esi
 	jnz 1f

arch/x86/kernel/relocate_kernel_64.S

@@ -19,29 +19,77 @@
 #define PTR(x) (x << 3)
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 
+/*
+ * control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+ * ~ control_page + PAGE_SIZE are used as data storage and stack for
+ * jumping back
+ */
+#define DATA(offset)		(KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
+
+/* Minimal CPU state */
+#define RSP			DATA(0x0)
+#define CR0			DATA(0x8)
+#define CR3			DATA(0x10)
+#define CR4			DATA(0x18)
+
+/* other data */
+#define CP_PA_TABLE_PAGE	DATA(0x20)
+#define CP_PA_SWAP_PAGE		DATA(0x28)
+#define CP_PA_BACKUP_PAGES_MAP	DATA(0x30)
+
 	.text
 	.align PAGE_SIZE
 	.code64
 	.globl relocate_kernel
 relocate_kernel:
-	/* %rdi indirection_page
+	/*
+	 * %rdi indirection_page
 	 * %rsi page_list
 	 * %rdx start address
+	 * %rcx preserve_context
 	 */
 
+	/* Save the CPU context, used for jumping back */
+	pushq %rbx
+	pushq %rbp
+	pushq %r12
+	pushq %r13
+	pushq %r14
+	pushq %r15
+	pushf
+
+	movq	PTR(VA_CONTROL_PAGE)(%rsi), %r11
+	movq	%rsp, RSP(%r11)
+	movq	%cr0, %rax
+	movq	%rax, CR0(%r11)
+	movq	%cr3, %rax
+	movq	%rax, CR3(%r11)
+	movq	%cr4, %rax
+	movq	%rax, CR4(%r11)
+
 	/* zero out flags, and disable interrupts */
 	pushq $0
 	popfq
 
-	/* get physical address of control page now */
-	/* this is impossible after page table switch */
+	/*
+	 * get physical address of control page now
+	 * this is impossible after page table switch
+	 */
 	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r8
 
 	/* get physical address of page table now too */
-	movq	PTR(PA_TABLE_PAGE)(%rsi), %rcx
+	movq	PTR(PA_TABLE_PAGE)(%rsi), %r9
+
+	/* get physical address of swap page now */
+	movq	PTR(PA_SWAP_PAGE)(%rsi), %r10
+
+	/* save some information for jumping back */
+	movq	%r9, CP_PA_TABLE_PAGE(%r11)
+	movq	%r10, CP_PA_SWAP_PAGE(%r11)
+	movq	%rdi, CP_PA_BACKUP_PAGES_MAP(%r11)
 
 	/* Switch to the identity mapped page tables */
-	movq	%rcx, %cr3
+	movq	%r9, %cr3
 
 	/* setup a new stack at the end of the physical control page */
 	lea	PAGE_SIZE(%r8), %rsp
@@ -55,7 +103,8 @@ identity_mapped:
 	/* store the start address on the stack */
 	pushq   %rdx
 
-	/* Set cr0 to a known state:
+	/*
+	 * Set cr0 to a known state:
 	 *  - Paging enabled
 	 *  - Alignment check disabled
 	 *  - Write protect disabled
@@ -68,7 +117,8 @@ identity_mapped:
 	orl	$(X86_CR0_PG | X86_CR0_PE), %eax
 	movq	%rax, %cr0
 
-	/* Set cr4 to a known state:
+	/*
+	 * Set cr4 to a known state:
 	 *  - physical address extension enabled
 	 */
 	movq	$X86_CR4_PAE, %rax
@@ -78,9 +128,87 @@ identity_mapped:
 1:
 
 	/* Flush the TLB (needed?) */
-	movq	%rcx, %cr3
+	movq	%r9, %cr3
+
+	movq	%rcx, %r11
+	call	swap_pages
+
+	/*
+	 * To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB by reloading %cr3 here, it's handy,
+	 * and not processor dependent.
+	 */
+	movq	%cr3, %rax
+	movq	%rax, %cr3
+
+	/*
+	 * set all of the registers to known values
+	 * leave %rsp alone
+	 */
+
+	testq	%r11, %r11
+	jnz 1f
+	xorq	%rax, %rax
+	xorq	%rbx, %rbx
+	xorq    %rcx, %rcx
+	xorq    %rdx, %rdx
+	xorq    %rsi, %rsi
+	xorq    %rdi, %rdi
+	xorq    %rbp, %rbp
+	xorq	%r8,  %r8
+	xorq	%r9,  %r9
+	xorq	%r10, %r9
+	xorq	%r11, %r11
+	xorq	%r12, %r12
+	xorq	%r13, %r13
+	xorq	%r14, %r14
+	xorq	%r15, %r15
+
+	ret
+
+1:
+	popq	%rdx
+	leaq	PAGE_SIZE(%r10), %rsp
+	call	*%rdx
+
+	/* get the re-entry point of the peer system */
+	movq	0(%rsp), %rbp
+	call	1f
+1:
+	popq	%r8
+	subq	$(1b - relocate_kernel), %r8
+	movq	CP_PA_SWAP_PAGE(%r8), %r10
+	movq	CP_PA_BACKUP_PAGES_MAP(%r8), %rdi
+	movq	CP_PA_TABLE_PAGE(%r8), %rax
+	movq	%rax, %cr3
+	lea	PAGE_SIZE(%r8), %rsp
+	call	swap_pages
+	movq	$virtual_mapped, %rax
+	pushq	%rax
+	ret
+
+virtual_mapped:
+	movq	RSP(%r8), %rsp
+	movq	CR4(%r8), %rax
+	movq	%rax, %cr4
+	movq	CR3(%r8), %rax
+	movq	CR0(%r8), %r8
+	movq	%rax, %cr3
+	movq	%r8, %cr0
+	movq	%rbp, %rax
+
+	popf
+	popq	%r15
+	popq	%r14
+	popq	%r13
+	popq	%r12
+	popq	%rbp
+	popq	%rbx
+	ret
 
 	/* Do the copies */
+swap_pages:
 	movq	%rdi, %rcx 	/* Put the page_list in %rcx */
 	xorq	%rdi, %rdi
 	xorq	%rsi, %rsi
@@ -112,36 +240,27 @@ identity_mapped:
 	movq	%rcx,   %rsi  /* For ever source page do a copy */
 	andq	$0xfffffffffffff000, %rsi
 
+	movq	%rdi, %rdx
+	movq	%rsi, %rax
+
+	movq	%r10, %rdi
 	movq	$512,   %rcx
 	rep ; movsq
-	jmp	0b
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * I need to execute a serializing instruction here.
-	 * So I flush the TLB by reloading %cr3 here, it's handy,
-	 * and not processor dependent.
-	 */
-	movq	%cr3, %rax
-	movq	%rax, %cr3
 
-	/* set all of the registers to known values */
-	/* leave %rsp alone */
+	movq	%rax, %rdi
+	movq	%rdx, %rsi
+	movq	$512,   %rcx
+	rep ; movsq
 
-	xorq	%rax, %rax
-	xorq	%rbx, %rbx
-	xorq    %rcx, %rcx
-	xorq    %rdx, %rdx
-	xorq    %rsi, %rsi
-	xorq    %rdi, %rdi
-	xorq    %rbp, %rbp
-	xorq	%r8,  %r8
-	xorq	%r9,  %r9
-	xorq	%r10, %r9
-	xorq	%r11, %r11
-	xorq	%r12, %r12
-	xorq	%r13, %r13
-	xorq	%r14, %r14
-	xorq	%r15, %r15
+	movq	%rdx, %rdi
+	movq	%r10, %rsi
+	movq	$512,   %rcx
+	rep ; movsq
 
+	lea	PAGE_SIZE(%rax), %rsi
+	jmp	0b
+3:
 	ret
+
+	.globl kexec_control_code_size
+.set kexec_control_code_size, . - relocate_kernel

arch/x86/kernel/visws_quirks.c

@@ -578,7 +578,7 @@ static struct irq_chip piix4_virtual_irq_type = {
 static irqreturn_t piix4_master_intr(int irq, void *dev_id)
 {
 	int realirq;
-	irq_desc_t *desc;
+	struct irq_desc *desc;
 	unsigned long flags;
 
 	spin_lock_irqsave(&i8259A_lock, flags);

arch/x86/kernel/vmlinux_64.lds.S

@@ -275,3 +275,10 @@ ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
 ASSERT((per_cpu__irq_stack_union == 0),
         "irq_stack_union is not at start of per-cpu area");
 #endif
+
+#ifdef CONFIG_KEXEC
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+       "kexec control code size is too big")
+#endif

arch/x86/lib/memcpy_64.S

@@ -1,30 +1,38 @@
 /* Copyright 2002 Andi Kleen */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
+
 #include <asm/cpufeature.h>
+#include <asm/dwarf2.h>
 
 /*
  * memcpy - Copy a memory block.
  *
- * Input:	
- * rdi destination
- * rsi source
- * rdx count
- * 
+ * Input:
+ *  rdi destination
+ *  rsi source
+ *  rdx count
+ *
  * Output:
  * rax original destination
- */	
+ */
 
+/*
+ * memcpy_c() - fast string ops (REP MOVSQ) based variant.
+ *
+ * Calls to this get patched into the kernel image via the
+ * alternative instructions framework:
+ */
 	ALIGN
 memcpy_c:
 	CFI_STARTPROC
-	movq %rdi,%rax
-	movl %edx,%ecx
-	shrl $3,%ecx
-	andl $7,%edx
+	movq %rdi, %rax
+
+	movl %edx, %ecx
+	shrl $3, %ecx
+	andl $7, %edx
 	rep movsq
-	movl %edx,%ecx
+	movl %edx, %ecx
 	rep movsb
 	ret
 	CFI_ENDPROC
@@ -33,99 +41,110 @@ ENDPROC(memcpy_c)
 ENTRY(__memcpy)
 ENTRY(memcpy)
 	CFI_STARTPROC
-	pushq %rbx
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rbx, 0
-	movq %rdi,%rax
 
-	movl %edx,%ecx
-	shrl $6,%ecx
+	/*
+	 * Put the number of full 64-byte blocks into %ecx.
+	 * Tail portion is handled at the end:
+	 */
+	movq %rdi, %rax
+	movl %edx, %ecx
+	shrl   $6, %ecx
 	jz .Lhandle_tail
 
 	.p2align 4
 .Lloop_64:
+	/*
+	 * We decrement the loop index here - and the zero-flag is
+	 * checked at the end of the loop (instructions inbetween do
+	 * not change the zero flag):
+	 */
 	decl %ecx
 
-	movq (%rsi),%r11
-	movq 8(%rsi),%r8
+	/*
+	 * Move in blocks of 4x16 bytes:
+	 */
+	movq 0*8(%rsi),		%r11
+	movq 1*8(%rsi),		%r8
+	movq %r11,		0*8(%rdi)
+	movq %r8,		1*8(%rdi)
 
-	movq %r11,(%rdi)
-	movq %r8,1*8(%rdi)
+	movq 2*8(%rsi),		%r9
+	movq 3*8(%rsi),		%r10
+	movq %r9,		2*8(%rdi)
+	movq %r10,		3*8(%rdi)
 
-	movq 2*8(%rsi),%r9
-	movq 3*8(%rsi),%r10
+	movq 4*8(%rsi),		%r11
+	movq 5*8(%rsi),		%r8
+	movq %r11,		4*8(%rdi)
+	movq %r8,		5*8(%rdi)
 
-	movq %r9,2*8(%rdi)
-	movq %r10,3*8(%rdi)
+	movq 6*8(%rsi),		%r9
+	movq 7*8(%rsi),		%r10
+	movq %r9,		6*8(%rdi)
+	movq %r10,		7*8(%rdi)
 
-	movq 4*8(%rsi),%r11
-	movq 5*8(%rsi),%r8
+	leaq 64(%rsi), %rsi
+	leaq 64(%rdi), %rdi
 
-	movq %r11,4*8(%rdi)
-	movq %r8,5*8(%rdi)
-
-	movq 6*8(%rsi),%r9
-	movq 7*8(%rsi),%r10
-
-	movq %r9,6*8(%rdi)
-	movq %r10,7*8(%rdi)
-
-	leaq 64(%rsi),%rsi
-	leaq 64(%rdi),%rdi
 	jnz  .Lloop_64
 
 .Lhandle_tail:
-	movl %edx,%ecx
-	andl $63,%ecx
-	shrl $3,%ecx
+	movl %edx, %ecx
+	andl  $63, %ecx
+	shrl   $3, %ecx
 	jz   .Lhandle_7
+
 	.p2align 4
 .Lloop_8:
 	decl %ecx
-	movq (%rsi),%r8
-	movq %r8,(%rdi)
-	leaq 8(%rdi),%rdi
-	leaq 8(%rsi),%rsi
+	movq (%rsi),		%r8
+	movq %r8,		(%rdi)
+	leaq 8(%rdi),		%rdi
+	leaq 8(%rsi),		%rsi
 	jnz  .Lloop_8
 
 .Lhandle_7:
-	movl %edx,%ecx
-	andl $7,%ecx
-	jz .Lende
+	movl %edx, %ecx
+	andl $7, %ecx
+	jz .Lend
+
 	.p2align 4
 .Lloop_1:
-	movb (%rsi),%r8b
-	movb %r8b,(%rdi)
+	movb (%rsi), %r8b
+	movb %r8b, (%rdi)
 	incq %rdi
 	incq %rsi
 	decl %ecx
 	jnz .Lloop_1
 
-.Lende:
-	popq %rbx
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_RESTORE rbx
+.Lend:
 	ret
-.Lfinal:
 	CFI_ENDPROC
 ENDPROC(memcpy)
 ENDPROC(__memcpy)
 
-	/* Some CPUs run faster using the string copy instructions.
-	   It is also a lot simpler. Use this when possible */
+	/*
+	 * Some CPUs run faster using the string copy instructions.
+	 * It is also a lot simpler. Use this when possible:
+	 */
 
-	.section .altinstr_replacement,"ax"
+	.section .altinstr_replacement, "ax"
 1:	.byte 0xeb				/* jmp <disp8> */
 	.byte (memcpy_c - memcpy) - (2f - 1b)	/* offset */
 2:
 	.previous
-	.section .altinstructions,"a"
+
+	.section .altinstructions, "a"
 	.align 8
 	.quad memcpy
 	.quad 1b
 	.byte X86_FEATURE_REP_GOOD
-	/* Replace only beginning, memcpy is used to apply alternatives, so it
-	 * is silly to overwrite itself with nops - reboot is only outcome... */
+
+	/*
+	 * Replace only beginning, memcpy is used to apply alternatives,
+	 * so it is silly to overwrite itself with nops - reboot is the
+	 * only outcome...
+	 */
 	.byte 2b - 1b
 	.byte 2b - 1b
 	.previous

arch/x86/mm/highmem_32.c

@@ -121,23 +121,30 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 	pagefault_enable();
 }
 
-/* This is the same as kmap_atomic() but can map memory that doesn't
- * have a struct page associated with it.
- */
-void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 {
 	enum fixed_addresses idx;
 	unsigned long vaddr;
 
 	pagefault_disable();
 
-	idx = type + KM_TYPE_NR*smp_processor_id();
+	debug_kmap_atomic_prot(type);
+
+	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	set_pte(kmap_pte - idx, pfn_pte(pfn, prot));
 	arch_flush_lazy_mmu_mode();
 
 	return (void*) vaddr;
 }
+
+/* This is the same as kmap_atomic() but can map memory that doesn't
+ * have a struct page associated with it.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+	return kmap_atomic_prot_pfn(pfn, type, kmap_prot);
+}
 EXPORT_SYMBOL_GPL(kmap_atomic_pfn); /* temporarily in use by i915 GEM until vmap */
 
 struct page *kmap_atomic_to_page(void *ptr)

arch/x86/mm/iomap_32.c

@@ -18,6 +18,7 @@
 
 #include <asm/iomap.h>
 #include <asm/pat.h>
+#include <asm/highmem.h>
 #include <linux/module.h>
 
 int is_io_mapping_possible(resource_size_t base, unsigned long size)
@@ -36,11 +37,6 @@ EXPORT_SYMBOL_GPL(is_io_mapping_possible);
 void *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 {
-	enum fixed_addresses idx;
-	unsigned long vaddr;
-
-	pagefault_disable();
-
 	/*
 	 * For non-PAT systems, promote PAGE_KERNEL_WC to PAGE_KERNEL_UC_MINUS.
 	 * PAGE_KERNEL_WC maps to PWT, which translates to uncached if the
@@ -50,12 +46,7 @@ iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 	if (!pat_enabled && pgprot_val(prot) == pgprot_val(PAGE_KERNEL_WC))
 		prot = PAGE_KERNEL_UC_MINUS;
 
-	idx = type + KM_TYPE_NR*smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte(kmap_pte-idx, pfn_pte(pfn, prot));
-	arch_flush_lazy_mmu_mode();
-
-	return (void*) vaddr;
+	return kmap_atomic_prot_pfn(pfn, type, prot);
 }
 EXPORT_SYMBOL_GPL(iomap_atomic_prot_pfn);
 

arch/x86/mm/kmmio.c

@@ -310,7 +310,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
 	struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
 
 	if (!ctx->active) {
-		pr_warning("kmmio: spurious debug trap on CPU %d.\n",
+		pr_debug("kmmio: spurious debug trap on CPU %d.\n",
 							smp_processor_id());
 		goto out;
 	}

drivers/ata/ata_piix.c

@@ -1289,6 +1289,39 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
 	return map;
 }
 
+static bool piix_no_sidpr(struct ata_host *host)
+{
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+
+	/*
+	 * Samsung DB-P70 only has three ATA ports exposed and
+	 * curiously the unconnected first port reports link online
+	 * while not responding to SRST protocol causing excessive
+	 * detection delay.
+	 *
+	 * Unfortunately, the system doesn't carry enough DMI
+	 * information to identify the machine but does have subsystem
+	 * vendor and device set.  As it's unclear whether the
+	 * subsystem vendor/device is used only for this specific
+	 * board, the port can't be disabled solely with the
+	 * information; however, turning off SIDPR access works around
+	 * the problem.  Turn it off.
+	 *
+	 * This problem is reported in bnc#441240.
+	 *
+	 * https://bugzilla.novell.com/show_bug.cgi?id=441420
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+	    pdev->subsystem_device == 0xb049) {
+		dev_printk(KERN_WARNING, host->dev,
+			   "Samsung DB-P70 detected, disabling SIDPR\n");
+		return true;
+	}
+
+	return false;
+}
+
 static int __devinit piix_init_sidpr(struct ata_host *host)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -1302,6 +1335,10 @@ static int __devinit piix_init_sidpr(struct ata_host *host)
 		if (hpriv->map[i] == IDE)
 			return 0;
 
+	/* is it blacklisted? */
+	if (piix_no_sidpr(host))
+		return 0;
+
 	if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
 		return 0;
 

drivers/ata/libata-sff.c

@@ -2066,6 +2066,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
 	iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
 	udelay(20);	/* FIXME: flush */
 	iowrite8(ap->ctl, ioaddr->ctl_addr);
+	ap->last_ctl = ap->ctl;
 
 	/* wait the port to become ready */
 	return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
@@ -2190,8 +2191,10 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
 	}
 
 	/* set up device control */
-	if (ap->ioaddr.ctl_addr)
+	if (ap->ioaddr.ctl_addr) {
 		iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+		ap->last_ctl = ap->ctl;
+	}
 }
 EXPORT_SYMBOL_GPL(ata_sff_postreset);
 
@@ -2534,6 +2537,7 @@ void ata_bus_reset(struct ata_port *ap)
 	if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
 		/* set up device control for ATA_FLAG_SATA_RESET */
 		iowrite8(ap->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = ap->ctl;
 	}
 
 	DPRINTK("EXIT\n");

drivers/ata/sata_mv.c

@@ -2218,12 +2218,13 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 		else
 			handled = mv_host_intr(host, pending_irqs);
 	}
-	spin_unlock(&host->lock);
 
 	/* for MSI: unmask; interrupt cause bits will retrigger now */
 	if (using_msi)
 		writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
 
+	spin_unlock(&host->lock);
+
 	return IRQ_RETVAL(handled);
 }
 

drivers/block/xsysace.c

@@ -489,6 +489,28 @@ static void ace_fsm_dostate(struct ace_device *ace)
 		ace->fsm_state, ace->id_req_count);
 #endif
 
+	/* Verify that there is actually a CF in the slot. If not, then
+	 * bail out back to the idle state and wake up all the waiters */
+	status = ace_in32(ace, ACE_STATUS);
+	if ((status & ACE_STATUS_CFDETECT) == 0) {
+		ace->fsm_state = ACE_FSM_STATE_IDLE;
+		ace->media_change = 1;
+		set_capacity(ace->gd, 0);
+		dev_info(ace->dev, "No CF in slot\n");
+
+		/* Drop all pending requests */
+		while ((req = elv_next_request(ace->queue)) != NULL)
+			end_request(req, 0);
+
+		/* Drop back to IDLE state and notify waiters */
+		ace->fsm_state = ACE_FSM_STATE_IDLE;
+		ace->id_result = -EIO;
+		while (ace->id_req_count) {
+			complete(&ace->id_completion);
+			ace->id_req_count--;
+		}
+	}
+
 	switch (ace->fsm_state) {
 	case ACE_FSM_STATE_IDLE:
 		/* See if there is anything to do */

drivers/char/agp/parisc-agp.c

@@ -359,9 +359,16 @@ fail:
 	return error;
 }
 
-static struct device *next_device(struct klist_iter *i) {
-	struct klist_node * n = klist_next(i);
-	return n ? container_of(n, struct device, knode_parent) : NULL;
+static int
+find_quicksilver(struct device *dev, void *data)
+{
+	struct parisc_device **lba = data;
+	struct parisc_device *padev = to_parisc_device(dev);
+
+	if (IS_QUICKSILVER(padev))
+		*lba = padev;
+
+	return 0;
 }
 
 static int
@@ -372,8 +379,6 @@ parisc_agp_init(void)
 	int err = -1;
 	struct parisc_device *sba = NULL, *lba = NULL;
 	struct lba_device *lbadev = NULL;
-	struct device *dev = NULL;
-	struct klist_iter i;
 
 	if (!sba_list)
 		goto out;
@@ -386,13 +391,7 @@ parisc_agp_init(void)
 	}
 
 	/* Now search our Pluto for our precious AGP device... */
-	klist_iter_init(&sba->dev.klist_children, &i);
-	while ((dev = next_device(&i))) {
-		struct parisc_device *padev = to_parisc_device(dev);
-		if (IS_QUICKSILVER(padev))
-			lba = padev;
-	}
-	klist_iter_exit(&i);
+	device_for_each_child(&sba->dev, &lba, find_quicksilver);
 
 	if (!lba) {
 		printk(KERN_INFO DRVPFX "No AGP devices found.\n");

drivers/ide/ide-atapi.c

@@ -140,6 +140,12 @@ static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
 	rq->cmd_flags |= REQ_PREEMPT;
 	rq->buffer = (char *)pc;
 	rq->rq_disk = disk;
+
+	if (pc->req_xfer) {
+		rq->data = pc->buf;
+		rq->data_len = pc->req_xfer;
+	}
+
 	memcpy(rq->cmd, pc->c, 12);
 	if (drive->media == ide_tape)
 		rq->cmd[13] = REQ_IDETAPE_PC1;
@@ -159,6 +165,12 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->buffer = (char *)pc;
+
+	if (pc->req_xfer) {
+		rq->data = pc->buf;
+		rq->data_len = pc->req_xfer;
+	}
+
 	memcpy(rq->cmd, pc->c, 12);
 	if (drive->media == ide_tape)
 		rq->cmd[13] = REQ_IDETAPE_PC1;

drivers/ide/ide-dma.c

@@ -128,6 +128,7 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
+	int i;
 
 	ide_map_sg(drive, rq);
 
@@ -136,8 +137,13 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq)
 	else
 		hwif->sg_dma_direction = DMA_TO_DEVICE;
 
-	return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
-			  hwif->sg_dma_direction);
+	i = dma_map_sg(hwif->dev, sg, hwif->sg_nents, hwif->sg_dma_direction);
+	if (i) {
+		hwif->orig_sg_nents = hwif->sg_nents;
+		hwif->sg_nents = i;
+	}
+
+	return i;
 }
 EXPORT_SYMBOL_GPL(ide_build_sglist);
 
@@ -156,7 +162,7 @@ void ide_destroy_dmatable(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 
-	dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
+	dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->orig_sg_nents,
 		     hwif->sg_dma_direction);
 }
 EXPORT_SYMBOL_GPL(ide_destroy_dmatable);

drivers/ide/ide-floppy.c

@@ -327,8 +327,10 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
 		return ide_stopped;
 	}
 
-	ide_init_sg_cmd(drive, rq);
-	ide_map_sg(drive, rq);
+	if (blk_fs_request(rq) || pc->req_xfer) {
+		ide_init_sg_cmd(drive, rq);
+		ide_map_sg(drive, rq);
+	}
 
 	pc->sg = hwif->sg_table;
 	pc->sg_cnt = hwif->sg_nents;

drivers/media/dvb/bt8xx/dst.c

@@ -1683,7 +1683,7 @@ static int dst_tune_frontend(struct dvb_frontend* fe,
 
 static int dst_get_tuning_algo(struct dvb_frontend *fe)
 {
-	return dst_algo;
+	return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW;
 }
 
 static int dst_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)

drivers/media/dvb/dvb-core/dvb_frontend.c

@@ -1290,9 +1290,6 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
 		dprintk("%s() Finalised property cache\n", __func__);
 		dtv_property_cache_submit(fe);
 
-		/* Request the search algorithm to search */
-		fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
-
 		r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND,
 			&fepriv->parameters);
 		break;
@@ -1717,6 +1714,10 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file,
 			fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000;
 
 		fepriv->state = FESTATE_RETUNE;
+
+		/* Request the search algorithm to search */
+		fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
+
 		dvb_frontend_wakeup(fe);
 		dvb_frontend_add_event(fe, 0);
 		fepriv->status = 0;

drivers/media/dvb/frontends/stb0899_algo.c

@@ -156,7 +156,7 @@ static void stb0899_first_subrange(struct stb0899_state *state)
 	}
 
 	if (range > 0)
-		internal->sub_range = MIN(internal->srch_range, range);
+		internal->sub_range = min(internal->srch_range, range);
 	else
 		internal->sub_range = 0;
 
@@ -185,7 +185,7 @@ static enum stb0899_status stb0899_check_tmg(struct stb0899_state *state)
 	timing = stb0899_read_reg(state, STB0899_RTF);
 
 	if (lock >= 42) {
-		if ((lock > 48) && (ABS(timing) >= 110)) {
+		if ((lock > 48) && (abs(timing) >= 110)) {
 			internal->status = ANALOGCARRIER;
 			dprintk(state->verbose, FE_DEBUG, 1, "-->ANALOG Carrier !");
 		} else {
@@ -222,7 +222,7 @@ static enum stb0899_status stb0899_search_tmg(struct stb0899_state *state)
 		index++;
 		derot_freq += index * internal->direction * derot_step;	/* next derot zig zag position	*/
 
-		if (ABS(derot_freq) > derot_limit)
+		if (abs(derot_freq) > derot_limit)
 			next_loop--;
 
 		if (next_loop) {
@@ -298,7 +298,7 @@ static enum stb0899_status stb0899_search_carrier(struct stb0899_state *state)
 			last_derot_freq = derot_freq;
 			derot_freq += index * internal->direction * internal->derot_step; /* next zig zag derotator position */
 
-			if(ABS(derot_freq) > derot_limit)
+			if(abs(derot_freq) > derot_limit)
 				next_loop--;
 
 			if (next_loop) {
@@ -400,7 +400,7 @@ static enum stb0899_status stb0899_search_data(struct stb0899_state *state)
 		if ((internal->status != CARRIEROK) || (stb0899_check_data(state) != DATAOK)) {
 
 			derot_freq += index * internal->direction * derot_step;	/* next zig zag derotator position */
-			if (ABS(derot_freq) > derot_limit)
+			if (abs(derot_freq) > derot_limit)
 				next_loop--;
 
 			if (next_loop) {
@@ -467,7 +467,7 @@ static void next_sub_range(struct stb0899_state *state)
 
 	if (internal->sub_dir > 0) {
 		old_sub_range = internal->sub_range;
-		internal->sub_range = MIN((internal->srch_range / 2) -
+		internal->sub_range = min((internal->srch_range / 2) -
 					  (internal->tuner_offst + internal->sub_range / 2),
 					   internal->sub_range);
 
@@ -771,7 +771,7 @@ static long Log2Int(int number)
 	int i;
 
 	i = 0;
-	while ((1 << i) <= ABS(number))
+	while ((1 << i) <= abs(number))
 		i++;
 
 	if (number == 0)

drivers/media/dvb/frontends/stb0899_drv.c

@@ -794,7 +794,7 @@ static int stb0899_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t
 	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
 	old_state = reg;
 	/* set to burst mode	*/
-	STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x02);
+	STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x03);
 	STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x01);
 	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
 	switch (burst) {

drivers/media/dvb/frontends/stb0899_priv.h

@@ -59,10 +59,6 @@
 #define MAKEWORD32(a, b, c, d)			(((a) << 24) | ((b) << 16) | ((c) << 8) | (d))
 #define MAKEWORD16(a, b)			(((a) << 8) | (b))
 
-#define MIN(x, y)				((x) <= (y) ? (x) : (y))
-#define MAX(x, y)				((x) >= (y) ? (x) : (y))
-#define ABS(x)					((x) >= 0 ? (x) : -(x))
-
 #define LSB(x)					((x & 0xff))
 #define MSB(y)					((y >> 8) & 0xff)
 
@@ -168,10 +164,10 @@ struct stb0899_internal {
 	u32			freq;			/* Demod internal Frequency		*/
 	u32			srate;			/* Demod internal Symbol rate		*/
 	enum stb0899_fec	fecrate;		/* Demod internal FEC rate		*/
-	u32			srch_range;		/* Demod internal Search Range		*/
-	u32			sub_range;		/* Demod current sub range (Hz)		*/
-	u32			tuner_step;		/* Tuner step (Hz)			*/
-	u32			tuner_offst;		/* Relative offset to carrier (Hz)	*/
+	s32			srch_range;		/* Demod internal Search Range		*/
+	s32			sub_range;		/* Demod current sub range (Hz)		*/
+	s32			tuner_step;		/* Tuner step (Hz)			*/
+	s32			tuner_offst;		/* Relative offset to carrier (Hz)	*/
 	u32			tuner_bw;		/* Current bandwidth of the tuner (Hz)	*/
 
 	s32			mclk;			/* Masterclock Divider factor (binary)	*/

drivers/media/dvb/frontends/stb6100.c

@@ -427,11 +427,11 @@ static int stb6100_init(struct dvb_frontend *fe)
 	status->refclock	= 27000000;	/* Hz	*/
 	status->iqsense		= 1;
 	status->bandwidth	= 36000;	/* kHz	*/
-	state->bandwidth	= status->bandwidth * 1000;	/* MHz	*/
+	state->bandwidth	= status->bandwidth * 1000;	/* Hz	*/
 	state->reference	= status->refclock / 1000;	/* kHz	*/
 
 	/* Set default bandwidth.	*/
-	return stb6100_set_bandwidth(fe, status->bandwidth);
+	return stb6100_set_bandwidth(fe, state->bandwidth);
 }
 
 static int stb6100_get_state(struct dvb_frontend *fe,

drivers/media/dvb/frontends/zl10353.c

@@ -590,7 +590,7 @@ static int zl10353_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
 	struct zl10353_state *state = fe->demodulator_priv;
 	u8 val = 0x0a;
 
-	if (state->config.no_tuner) {
+	if (state->config.disable_i2c_gate_ctrl) {
 		/* No tuner attached to the internal I2C bus */
 		/* If set enable I2C bridge, the main I2C bus stopped hardly */
 		return 0;

drivers/media/dvb/frontends/zl10353.h

@@ -38,6 +38,9 @@ struct zl10353_config
 
 	/* set if parallel ts output is required */
 	int parallel_ts;
+
+	/* set if i2c_gate_ctrl disable is required */
+	u8 disable_i2c_gate_ctrl:1;
 };
 
 #if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))