Merge branch 'mxs/cleanup' into next/multiplatform

This is a dependency for mxs/multiplatform

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Conflicts:
	drivers/clocksource/Makefile

CREDITS

@@ -1510,6 +1510,14 @@ D: Natsemi ethernet
 D: Cobalt Networks (x86) support
 D: This-and-That
 
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project

Documentation/hwmon/lm75

@@ -23,7 +23,7 @@ Supported chips:
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/
   * Microchip (TelCom) TCN75
-    Prefix: 'lm75'
+    Prefix: 'tcn75'
     Addresses scanned: none
     Datasheet: Publicly available at the Microchip website
                http://www.microchip.com/

Documentation/i2c/busses/i2c-diolan-u2c

@@ -5,7 +5,7 @@ Supported adapters:
     Documentation:
 	http://www.diolan.com/i2c/u2c12.html
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 Description
 -----------

Documentation/networking/ipvs-sysctl.txt

@@ -15,6 +15,13 @@ amemthresh - INTEGER
         enabled and the variable is automatically set to 2, otherwise
         the strategy is disabled and the variable is  set  to 1.
 
+backup_only - BOOLEAN
+	0 - disabled (default)
+	not 0 - enabled
+
+	If set, disable the director function while the server is
+	in backup mode to avoid packet loops for DR/TUN methods.
+
 conntrack - BOOLEAN
 	0 - disabled (default)
 	not 0 - enabled

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -912,7 +912,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     models depending on the codec chip.  The list of available models
     is found in HD-Audio-Models.txt
 
-    The model name "genric" is treated as a special case.  When this
+    The model name "generic" is treated as a special case.  When this
     model is given, the driver uses the generic codec parser without
     "codec-patch".  It's sometimes good for testing and debugging.
 

Documentation/sound/alsa/seq_oss.html

@@ -285,7 +285,7 @@ sample data.
 <H4>
 7.2.4 Close Callback</H4>
 The <TT>close</TT> callback is called when this device is closed by the
-applicaion. If any private data was allocated in open callback, it must
+application. If any private data was allocated in open callback, it must
 be released in the close callback. The deletion of ALSA port should be
 done here, too. This callback must not be NULL.
 <H4>

MAINTAINERS

@@ -1338,12 +1338,6 @@ S:	Maintained
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
-ASUS ASB100 HARDWARE MONITOR DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	drivers/hwmon/asb100.c
-
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 M:	Dan Williams <djbw@fb.com>
 W:	http://sourceforge.net/projects/xscaleiop
@@ -1467,6 +1461,12 @@ F:	drivers/dma/at_hdmac.c
 F:	drivers/dma/at_hdmac_regs.h
 F:	include/linux/platform_data/dma-atmel.h
 
+ATMEL I2C DRIVER
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+L:	linux-i2c@vger.kernel.org
+S:	Supported
+F:	drivers/i2c/busses/i2c-at91.c
+
 ATMEL ISI DRIVER
 M:	Josh Wu <josh.wu@atmel.com>
 L:	linux-media@vger.kernel.org
@@ -2629,7 +2629,7 @@ F:	include/uapi/drm/
 
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Daniel Vetter <daniel.vetter@ffwll.ch>
-L:	intel-gfx@lists.freedesktop.org (subscribers-only)
+L:	intel-gfx@lists.freedesktop.org
 L:	dri-devel@lists.freedesktop.org
 T:	git git://people.freedesktop.org/~danvet/drm-intel
 S:	Supported
@@ -3242,6 +3242,12 @@ F:	Documentation/firmware_class/
 F:	drivers/base/firmware*.c
 F:	include/linux/firmware.h
 
+FLASHSYSTEM DRIVER (IBM FlashSystem 70/80 PCI SSD Flash Card)
+M:	Joshua Morris <josh.h.morris@us.ibm.com>
+M:	Philip Kelleher <pjk1939@linux.vnet.ibm.com>
+S:	Maintained
+F:	drivers/block/rsxx/
+
 FLOPPY DRIVER
 M:	Jiri Kosina <jkosina@suse.cz>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
@@ -3851,7 +3857,7 @@ F:	drivers/i2c/busses/i2c-ismt.c
 F:	Documentation/i2c/busses/i2c-ismt
 
 I2C/SMBUS STUB DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
+M:	Jean Delvare <khali@linux-fr.org>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-stub.c
@@ -5647,6 +5653,14 @@ S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
+NVM EXPRESS DRIVER
+M:	Matthew Wilcox <willy@linux.intel.com>
+L:	linux-nvme@lists.infradead.org
+T:	git git://git.infradead.org/users/willy/linux-nvme.git
+S:	Supported
+F:	drivers/block/nvme.c
+F:	include/linux/nvme.h
+
 OMAP SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
@@ -5675,7 +5689,7 @@ S:	Maintained
 F:	arch/arm/*omap*/*clock*
 
 OMAP POWER MANAGEMENT SUPPORT
-M:	Kevin Hilman <khilman@ti.com>
+M:	Kevin Hilman <khilman@deeprootsystems.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*pm*
@@ -5769,7 +5783,7 @@ F:	arch/arm/*omap*/usb*
 
 OMAP GPIO DRIVER
 M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
-M:	Kevin Hilman <khilman@ti.com>
+M:	Kevin Hilman <khilman@deeprootsystems.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/gpio/gpio-omap.c
@@ -6201,7 +6215,7 @@ F:	include/linux/power_supply.h
 F:	drivers/power/
 
 PNP SUPPORT
-M:	Adam Belay <abelay@mit.edu>
+M:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 M:	Bjorn Helgaas <bhelgaas@google.com>
 S:	Maintained
 F:	drivers/pnp/
@@ -6543,12 +6557,6 @@ S:	Maintained
 F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
 
-RAMSAM DRIVER (IBM RamSan 70/80 PCI SSD Flash Card)
-M:	Joshua Morris <josh.h.morris@us.ibm.com>
-M:	Philip Kelleher <pjk1939@linux.vnet.ibm.com>
-S:	Maintained
-F:	drivers/block/rsxx/
-
 RANDOM NUMBER DRIVER
 M:	Theodore Ts'o" <tytso@mit.edu>
 S:	Maintained
@@ -7165,7 +7173,7 @@ F:	arch/arm/mach-s3c2410/bast-irq.c
 
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
-M:	Kevin Hilman <khilman@ti.com>
+M:	Kevin Hilman <khilman@deeprootsystems.com>
 L:	davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
 T:	git git://gitorious.org/linux-davinci/linux-davinci.git
 Q:	http://patchwork.kernel.org/project/linux-davinci/list/
@@ -7198,13 +7206,6 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/sis/sis900.*
 
-SIS 96X I2C/SMBUS DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-sis96x
-F:	drivers/i2c/busses/i2c-sis96x.c
-
 SIS FRAMEBUFFER DRIVER
 M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.net/linuxsisvga.shtml
@@ -7282,7 +7283,7 @@ F:	Documentation/hwmon/sch5627
 F:	drivers/hwmon/sch5627.c
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397
@@ -7705,9 +7706,10 @@ F:	include/linux/swiotlb.h
 
 SYNOPSYS ARC ARCHITECTURE
 M:	Vineet Gupta <vgupta@synopsys.com>
-L:	linux-snps-arc@vger.kernel.org
 S:	Supported
 F:	arch/arc/
+F:	Documentation/devicetree/bindings/arc/
+F:	drivers/tty/serial/arc-uart.c
 
 SYSV FILESYSTEM
 M:	Christoph Hellwig <hch@infradead.org>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arc/include/asm/dma-mapping.h

@@ -126,7 +126,7 @@ dma_map_sg(struct device *dev, struct scatterlist *sg,
 	int i;
 
 	for_each_sg(sg, s, nents, i)
-		sg->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+		s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
 					       s->length, dir);
 
 	return nents;

arch/arc/include/asm/elf.h

@@ -72,7 +72,4 @@ extern int elf_check_arch(const struct elf32_hdr *);
  */
 #define ELF_PLATFORM	(NULL)
 
-#define SET_PERSONALITY(ex) \
-	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
-
 #endif

arch/arc/include/asm/entry.h

@@ -415,7 +415,7 @@
  *-------------------------------------------------------------*/
 .macro SAVE_ALL_EXCEPTION   marker
 
-	st      \marker, [sp, 8]
+	st      \marker, [sp, 8]	/* orig_r8 */
 	st      r0, [sp, 4]    /* orig_r0, needed only for sys calls */
 
 	/* Restore r9 used to code the early prologue */

arch/arc/include/asm/kgdb.h

@@ -13,7 +13,7 @@
 
 #ifdef CONFIG_KGDB
 
-#include <asm/user.h>
+#include <asm/ptrace.h>
 
 /* to ensure compatibility with Linux 2.6.35, we don't implement the get/set
  * register API yet */
@@ -53,9 +53,7 @@ enum arc700_linux_regnums {
 };
 
 #else
-static inline void kgdb_trap(struct pt_regs *regs, int param)
-{
-}
+#define kgdb_trap(regs, param)
 #endif
 
 #endif	/* __ARC_KGDB_H__ */

arch/arc/include/asm/ptrace.h

@@ -123,7 +123,7 @@ static inline long regs_return_value(struct pt_regs *regs)
 #define orig_r8_IS_SCALL		0x0001
 #define orig_r8_IS_SCALL_RESTARTED	0x0002
 #define orig_r8_IS_BRKPT		0x0004
-#define orig_r8_IS_EXCPN		0x0004
+#define orig_r8_IS_EXCPN		0x0008
 #define orig_r8_IS_IRQ1			0x0010
 #define orig_r8_IS_IRQ2			0x0020
 

arch/arc/include/asm/syscalls.h

@@ -16,8 +16,6 @@
 #include <linux/types.h>
 
 int sys_clone_wrapper(int, int, int, int, int);
-int sys_fork_wrapper(void);
-int sys_vfork_wrapper(void);
 int sys_cacheflush(uint32_t, uint32_t uint32_t);
 int sys_arc_settls(void *);
 int sys_arc_gettls(void);

arch/arc/include/uapi/asm/ptrace.h

@@ -28,14 +28,14 @@
 */
 struct user_regs_struct {
 
-	struct scratch {
+	struct {
 		long pad;
 		long bta, lp_start, lp_end, lp_count;
 		long status32, ret, blink, fp, gp;
 		long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
 		long sp;
 	} scratch;
-	struct callee {
+	struct {
 		long pad;
 		long r25, r24, r23, r22, r21, r20;
 		long r19, r18, r17, r16, r15, r14, r13;

arch/arc/kernel/entry.S

@@ -452,7 +452,7 @@ tracesys:
 	; using ERET won't work since next-PC has already committed
 	lr  r12, [efa]
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
-	st  r12, [r11, THREAD_FAULT_ADDR]
+	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
 
 	; PRE Sys Call Ptrace hook
 	mov r0, sp			; pt_regs needed
@@ -792,31 +792,6 @@ ARC_EXIT ret_from_fork
 
 ;################### Special Sys Call Wrappers ##########################
 
-; TBD: call do_fork directly from here
-ARC_ENTRY sys_fork_wrapper
-	SAVE_CALLEE_SAVED_USER
-	bl  @sys_fork
-	DISCARD_CALLEE_SAVED_USER
-
-	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz  tracesys_exit
-
-	b ret_from_system_call
-ARC_EXIT sys_fork_wrapper
-
-ARC_ENTRY sys_vfork_wrapper
-	SAVE_CALLEE_SAVED_USER
-	bl  @sys_vfork
-	DISCARD_CALLEE_SAVED_USER
-
-	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz  tracesys_exit
-
-	b ret_from_system_call
-ARC_EXIT sys_vfork_wrapper
-
 ARC_ENTRY sys_clone_wrapper
 	SAVE_CALLEE_SAVED_USER
 	bl  @sys_clone

arch/arc/kernel/kgdb.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/kgdb.h>
+#include <linux/sched.h>
 #include <asm/disasm.h>
 #include <asm/cacheflush.h>
 

arch/arc/kernel/setup.c

@@ -232,10 +232,8 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 
 	n += scnprintf(buf + n, len - n, "\n");
 
-#ifdef _ASM_GENERIC_UNISTD_H
 	n += scnprintf(buf + n, len - n,
-		       "OS ABI [v2]\t: asm-generic/{unistd,stat,fcntl}\n");
-#endif
+		       "OS ABI [v3]\t: no-legacy-syscalls\n");
 
 	return buf;
 }

arch/arc/kernel/sys.c

@@ -6,8 +6,6 @@
 #include <asm/syscalls.h>
 
 #define sys_clone	sys_clone_wrapper
-#define sys_fork	sys_fork_wrapper
-#define sys_vfork	sys_vfork_wrapper
 
 #undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),

arch/arm/Kconfig

@@ -427,12 +427,14 @@ config ARCH_MXS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK_PREPARE
 	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select SPARSE_IRQ
+	select STMP_DEVICE
 	select USE_OF
 	help
 	  Support for Freescale MXS-based family of processors
@@ -696,6 +698,7 @@ config ARCH_RPC
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
+	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -831,6 +834,7 @@ config ARCH_SHARK
 	select ISA_DMA
 	select NEED_MACH_MEMORY_H
 	select PCI
+	select VIRT_TO_BUS
 	select ZONE_DMA
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
@@ -913,12 +917,12 @@ config ARCH_MULTI_V4_V5
 	bool
 
 config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+	bool "ARMv6 based platforms (ARM11)"
 	select ARCH_MULTI_V6_V7
 	select CPU_V6
 
 config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 	default y
 	select ARCH_MULTI_V6_V7
 	select ARCH_VEXPRESS
@@ -1371,10 +1375,6 @@ config ISA_DMA
 	bool
 	select ISA_DMA_API
 
-config ARCH_NO_VIRT_TO_BUS
-	def_bool y
-	depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool

arch/arm/Kconfig.debug

@@ -520,6 +520,7 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX53_UART || \
 						DEBUG_IMX6Q_UART
 	default 1
+	depends on ARCH_MXC
 	help
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -238,8 +238,32 @@
 				nand {
 					pinctrl_nand: nand-0 {
 						atmel,pins =
-							<3 4 0x0 0x1	/* PD5 gpio RDY pin pull_up */
-							 3 5 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
+							<3 0 0x1 0x0	/* PD0 periph A Read Enable */
+							 3 1 0x1 0x0	/* PD1 periph A Write Enable */
+							 3 2 0x1 0x0	/* PD2 periph A Address Latch Enable */
+							 3 3 0x1 0x0	/* PD3 periph A Command Latch Enable */
+							 3 4 0x0 0x1	/* PD4 gpio Chip Enable pin pull_up */
+							 3 5 0x0 0x1	/* PD5 gpio RDY/BUSY pin pull_up */
+							 3 6 0x1 0x0	/* PD6 periph A Data bit 0 */
+							 3 7 0x1 0x0	/* PD7 periph A Data bit 1 */
+							 3 8 0x1 0x0	/* PD8 periph A Data bit 2 */
+							 3 9 0x1 0x0	/* PD9 periph A Data bit 3 */
+							 3 10 0x1 0x0	/* PD10 periph A Data bit 4 */
+							 3 11 0x1 0x0	/* PD11 periph A Data bit 5 */
+							 3 12 0x1 0x0	/* PD12 periph A Data bit 6 */
+							 3 13 0x1 0x0>;	/* PD13 periph A Data bit 7 */
+					};
+
+					pinctrl_nand_16bits: nand_16bits-0 {
+						atmel,pins =
+							<3 14 0x1 0x0	/* PD14 periph A Data bit 8 */
+							 3 15 0x1 0x0	/* PD15 periph A Data bit 9 */
+							 3 16 0x1 0x0	/* PD16 periph A Data bit 10 */
+							 3 17 0x1 0x0	/* PD17 periph A Data bit 11 */
+							 3 18 0x1 0x0	/* PD18 periph A Data bit 12 */
+							 3 19 0x1 0x0	/* PD19 periph A Data bit 13 */
+							 3 20 0x1 0x0	/* PD20 periph A Data bit 14 */
+							 3 21 0x1 0x0>;	/* PD21 periph A Data bit 15 */
 					};
 				};
 

arch/arm/boot/dts/exynos4.dtsi

@@ -275,18 +275,27 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
 		};
 	};
 };

arch/arm/boot/dts/exynos5440.dtsi

@@ -142,12 +142,18 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x120000 0x1000>;
 			interrupts = <0 34 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@121B0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121000 0x1000>;
 			interrupts = <0 35 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 	};
 

arch/arm/boot/dts/imx23.dtsi

@@ -295,6 +295,7 @@
 			};
 
 			digctl@8001c000 {
+				compatible = "fsl,imx23-digctl";
 				reg = <0x8001c000 2000>;
 				status = "disabled";
 			};
@@ -321,6 +322,7 @@
 			};
 
 			ocotp@8002c000 {
+				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
@@ -360,7 +362,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl";
+				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -426,6 +428,7 @@
 				compatible = "fsl,imx23-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <28 29 30 31>;
+				clocks = <&clks 28>;
 			};
 
 			auart0: serial@8006c000 {

arch/arm/boot/dts/imx28.dtsi

@@ -647,6 +647,7 @@
 			};
 
 			digctl@8001c000 {
+				compatible = "fsl,imx28-digctl";
 				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
@@ -676,6 +677,7 @@
 			};
 
 			ocotp@8002c000 {
+				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
@@ -755,7 +757,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl";
+				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -838,6 +840,7 @@
 				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <48 49 50 51>;
+				clocks = <&clks 26>;
 			};
 
 			auart0: serial@8006a000 {

arch/arm/boot/dts/tegra20.dtsi

@@ -385,7 +385,7 @@
 
 	spi@7000d800 {
 		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000d480 0x200>;
+		reg = <0x7000d800 0x200>;
 		interrupts = <0 83 0x04>;
 		nvidia,dma-request-selector = <&apbdma 17>;
 		#address-cells = <1>;

arch/arm/boot/dts/tegra30.dtsi

@@ -372,7 +372,7 @@
 
 	spi@7000d800 {
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000d480 0x200>;
+		reg = <0x7000d800 0x200>;
 		interrupts = <0 83 0x04>;
 		nvidia,dma-request-selector = <&apbdma 17>;
 		#address-cells = <1>;

arch/arm/kernel/smp.c

@@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
 			  CLOCK_EVT_FEAT_PERIODIC |
 			  CLOCK_EVT_FEAT_DUMMY;
-	evt->rating	= 400;
+	evt->rating	= 100;
 	evt->mult	= 1;
 	evt->set_mode	= broadcast_timer_set_mode;
 

arch/arm/lib/memset.S

@@ -14,31 +14,15 @@
 
 	.text
 	.align	5
-	.word	0
-
-1:	subs	r2, r2, #4		@ 1 do we have enough
-	blt	5f			@ 1 bytes to align with?
-	cmp	r3, #2			@ 1
-	strltb	r1, [ip], #1		@ 1
-	strleb	r1, [ip], #1		@ 1
-	strb	r1, [ip], #1		@ 1
-	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted.  Try doing the
- * memset again.
- */
 
 ENTRY(memset)
-/*
- * Preserve the contents of r0 for the return value.
- */
-	mov	ip, r0
-	ands	r3, ip, #3		@ 1 unaligned?
-	bne	1b			@ 1
+	ands	r3, r0, #3		@ 1 unaligned?
+	mov	ip, r0			@ preserve r0 as return value
+	bne	6f			@ 1
 /*
  * we know that the pointer in ip is aligned to a word boundary.
  */
-	orr	r1, r1, r1, lsl #8
+1:	orr	r1, r1, r1, lsl #8
 	orr	r1, r1, r1, lsl #16
 	mov	r3, r1
 	cmp	r2, #16
@@ -127,4 +111,13 @@ ENTRY(memset)
 	tst	r2, #1
 	strneb	r1, [ip], #1
 	mov	pc, lr
+
+6:	subs	r2, r2, #4		@ 1 do we have enough
+	blt	5b			@ 1 bytes to align with?
+	cmp	r3, #2			@ 1
+	strltb	r1, [ip], #1		@ 1
+	strleb	r1, [ip], #1		@ 1
+	strb	r1, [ip], #1		@ 1
+	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
+	b	1b
 ENDPROC(memset)

arch/arm/mach-at91/include/mach/gpio.h

@@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin);
 extern void at91_gpio_suspend(void);
 extern void at91_gpio_resume(void);
 
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
 #endif	/* __ASSEMBLY__ */
 
 #endif

arch/arm/mach-at91/irq.c

@@ -92,23 +92,21 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
 
 void at91_irq_suspend(void)
 {
-	int i = 0, bit;
+	int bit = -1;
 
 	if (has_aic5()) {
 		/* disable enabled irqs */
-		while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+		while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IDCR, 1);
-			i = bit;
 		}
 		/* enable wakeup irqs */
-		i = 0;
-		while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+		bit = -1;
+		while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IECR, 1);
-			i = bit;
 		}
 	} else {
 		at91_aic_write(AT91_AIC_IDCR, *backups);
@@ -118,23 +116,21 @@ void at91_irq_suspend(void)
 
 void at91_irq_resume(void)
 {
-	int i = 0, bit;
+	int bit = -1;
 
 	if (has_aic5()) {
 		/* disable wakeup irqs */
-		while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+		while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IDCR, 1);
-			i = bit;
 		}
 		/* enable irqs disabled for suspend */
-		i = 0;
-		while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+		bit = -1;
+		while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IECR, 1);
-			i = bit;
 		}
 	} else {
 		at91_aic_write(AT91_AIC_IDCR, *wakeups);

arch/arm/mach-at91/pm.c

@@ -201,7 +201,10 @@ extern u32 at91_slow_clock_sz;
 
 static int at91_pm_enter(suspend_state_t state)
 {
-	at91_gpio_suspend();
+	if (of_have_populated_dt())
+		at91_pinctrl_gpio_suspend();
+	else
+		at91_gpio_suspend();
 	at91_irq_suspend();
 
 	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
@@ -286,7 +289,10 @@ static int at91_pm_enter(suspend_state_t state)
 error:
 	target_state = PM_SUSPEND_ON;
 	at91_irq_resume();
-	at91_gpio_resume();
+	if (of_have_populated_dt())
+		at91_pinctrl_gpio_resume();
+	else
+		at91_gpio_resume();
 	return 0;
 }
 

arch/arm/mach-davinci/dma.c

@@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel);
  */
 int edma_alloc_slot(unsigned ctlr, int slot)
 {
+	if (!edma_cc[ctlr])
+		return -EINVAL;
+
 	if (slot >= 0)
 		slot = EDMA_CHAN_SLOT(slot);
 

arch/arm/mach-footbridge/Kconfig

@@ -67,6 +67,7 @@ config ARCH_NETWINDER
 	select ISA
 	select ISA_DMA
 	select PCI
+	select VIRT_TO_BUS
 	help
 	  Say Y here if you intend to run this kernel on the Rebel.COM
 	  NetWinder.  Information about this machine can be found at:

arch/arm/mach-imx/clk-imx35.c

@@ -264,6 +264,7 @@ int __init mx35_clocks_init(void)
 	clk_prepare_enable(clk[gpio3_gate]);
 	clk_prepare_enable(clk[iim_gate]);
 	clk_prepare_enable(clk[emi_gate]);
+	clk_prepare_enable(clk[max_gate]);
 
 	/*
 	 * SCC is needed to boot via mmc after a watchdog reset. The clock code

arch/arm/mach-imx/imx25-dt.c

@@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = {
 	NULL
 };
 
+static void __init imx25_timer_init(void)
+{
+	mx25_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.map_io		= mx25_map_io,
 	.init_early	= imx25_init_early,

arch/arm/mach-mmp/gplugd.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <linux/gpio.h>
 
 #include <asm/mach/arch.h>

arch/arm/mach-mxs/Makefile

@@ -1,6 +1,2 @@
-# Common support
-obj-y := icoll.o ocotp.o system.o timer.o mm.o
-
 obj-$(CONFIG_PM) += pm.o
-
 obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o

arch/arm/mach-mxs/include/mach/common.h

@@ -1,29 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_COMMON_H__
-#define __MACH_MXS_COMMON_H__
-
-extern const u32 *mxs_get_ocotp(void);
-extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(void);
-extern void mxs_restart(char, const char *);
-extern int mxs_saif_clkmux_select(unsigned int clkmux);
-
-extern int mx23_clocks_init(void);
-extern void mx23_map_io(void);
-
-extern int mx28_clocks_init(void);
-extern void mx28_map_io(void);
-
-extern void icoll_init_irq(void);
-extern void icoll_handle_irq(struct pt_regs *);
-
-#endif /* __MACH_MXS_COMMON_H__ */

arch/arm/mach-mxs/include/mach/debug-macro.S

@@ -11,16 +11,13 @@
  *
  */
 
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-
 #ifdef CONFIG_DEBUG_IMX23_UART
-#define UART_PADDR	MX23_DUART_BASE_ADDR
+#define UART_PADDR	0x80070000
 #elif defined (CONFIG_DEBUG_IMX28_UART)
-#define UART_PADDR	MX28_DUART_BASE_ADDR
+#define UART_PADDR	0x80074000
 #endif
 
-#define UART_VADDR	MXS_IO_ADDRESS(UART_PADDR)
+#define UART_VADDR	0xfe100000
 
 		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =UART_PADDR	@ physical

arch/arm/mach-mxs/include/mach/digctl.h

@@ -1,22 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_DIGCTL_H__
-#define __MACH_DIGCTL_H__
-
-/* MXS DIGCTL SAIF CLKMUX */
-#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
-#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
-
-#define HW_DIGCTL_CTRL			0x0
-#define  BP_DIGCTL_CTRL_SAIF_CLKMUX	10
-#define  BM_DIGCTL_CTRL_SAIF_CLKMUX	(0x3 << 10)
-#define HW_DIGCTL_CHIPID		0x310
-#endif

arch/arm/mach-mxs/include/mach/hardware.h

@@ -1,23 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_HARDWARE_H__
-#define __MACH_MXS_HARDWARE_H__
-
-#endif /* __MACH_MXS_HARDWARE_H__ */

arch/arm/mach-mxs/include/mach/mx23.h

@@ -1,169 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX23_H__
-#define __MACH_MX23_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX23_OCRAM_BASE_ADDR		0x00000000
-#define MX23_OCRAM_SIZE			SZ_32K
-
-/*
- * IO
- */
-#define MX23_IO_BASE_ADDR		0x80000000
-#define MX23_IO_SIZE			SZ_1M
-
-#define MX23_ICOLL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x000000)
-#define MX23_APBH_DMA_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x004000)
-#define MX23_BCH_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x00a000)
-#define MX23_GPMI_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x00c000)
-#define MX23_SSP1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x010000)
-#define MX23_PINCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x018000)
-#define MX23_DIGCTL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x01c000)
-#define MX23_ETM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x020000)
-#define MX23_APBX_DMA_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x024000)
-#define MX23_DCP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x028000)
-#define MX23_PXP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02a000)
-#define MX23_OCOTP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02c000)
-#define MX23_AXI_AHB0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02e000)
-#define MX23_LCDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x030000)
-#define MX23_SSP2_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x034000)
-#define MX23_TVENC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x038000)
-#define MX23_CLKCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x040000)
-#define MX23_SAIF0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x042000)
-#define MX23_POWER_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x044000)
-#define MX23_SAIF1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x046000)
-#define MX23_AUDIOOUT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x048000)
-#define MX23_AUDIOIN_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x04c000)
-#define MX23_LRADC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x050000)
-#define MX23_SPDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x054000)
-#define MX23_I2C_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x058000)
-#define MX23_RTC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x05c000)
-#define MX23_PWM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x064000)
-#define MX23_TIMROT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x068000)
-#define MX23_AUART1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x06c000)
-#define MX23_AUART2_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x06e000)
-#define MX23_DUART_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x070000)
-#define MX23_USBPHY_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x07c000)
-#define MX23_USBCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x080000)
-#define MX23_DRAM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x0e0000)
-
-#define MX23_IO_P2V(x)			MXS_IO_P2V(x)
-#define MX23_IO_ADDRESS(x)		IOMEM(MX23_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX23_INT_DUART			0
-#define MX23_INT_COMMS_RX		1
-#define MX23_INT_COMMS_TX		1
-#define MX23_INT_SSP2_ERROR		2
-#define MX23_INT_VDD5V			3
-#define MX23_INT_HEADPHONE_SHORT	4
-#define MX23_INT_DAC_DMA		5
-#define MX23_INT_DAC_ERROR		6
-#define MX23_INT_ADC_DMA		7
-#define MX23_INT_ADC_ERROR		8
-#define MX23_INT_SPDIF_DMA		9
-#define MX23_INT_SAIF2_DMA		9
-#define MX23_INT_SPDIF_ERROR		10
-#define MX23_INT_SAIF1_IRQ		10
-#define MX23_INT_SAIF2_IRQ		10
-#define MX23_INT_USB_CTRL		11
-#define MX23_INT_USB_WAKEUP		12
-#define MX23_INT_GPMI_DMA		13
-#define MX23_INT_SSP1_DMA		14
-#define MX23_INT_SSP1_ERROR		15
-#define MX23_INT_GPIO0			16
-#define MX23_INT_GPIO1			17
-#define MX23_INT_GPIO2			18
-#define MX23_INT_SAIF1_DMA		19
-#define MX23_INT_SSP2_DMA		20
-#define MX23_INT_ECC8_IRQ		21
-#define MX23_INT_RTC_ALARM		22
-#define MX23_INT_AUART1_TX_DMA		23
-#define MX23_INT_AUART1			24
-#define MX23_INT_AUART1_RX_DMA		25
-#define MX23_INT_I2C_DMA		26
-#define MX23_INT_I2C_ERROR		27
-#define MX23_INT_TIMER0			28
-#define MX23_INT_TIMER1			29
-#define MX23_INT_TIMER2			30
-#define MX23_INT_TIMER3			31
-#define MX23_INT_BATT_BRNOUT		32
-#define MX23_INT_VDDD_BRNOUT		33
-#define MX23_INT_VDDIO_BRNOUT		34
-#define MX23_INT_VDD18_BRNOUT		35
-#define MX23_INT_TOUCH_DETECT		36
-#define MX23_INT_LRADC_CH0		37
-#define MX23_INT_LRADC_CH1		38
-#define MX23_INT_LRADC_CH2		39
-#define MX23_INT_LRADC_CH3		40
-#define MX23_INT_LRADC_CH4		41
-#define MX23_INT_LRADC_CH5		42
-#define MX23_INT_LRADC_CH6		43
-#define MX23_INT_LRADC_CH7		44
-#define MX23_INT_LCDIF_DMA		45
-#define MX23_INT_LCDIF_ERROR		46
-#define MX23_INT_DIGCTL_DEBUG_TRAP	47
-#define MX23_INT_RTC_1MSEC		48
-#define MX23_INT_DRI_DMA		49
-#define MX23_INT_DRI_ATTENTION		50
-#define MX23_INT_GPMI_ATTENTION		51
-#define MX23_INT_IR			52
-#define MX23_INT_DCP_VMI		53
-#define MX23_INT_DCP			54
-#define MX23_INT_BCH			56
-#define MX23_INT_PXP			57
-#define MX23_INT_AUART2_TX_DMA		58
-#define MX23_INT_AUART2			59
-#define MX23_INT_AUART2_RX_DMA		60
-#define MX23_INT_VDAC_DETECT		61
-#define MX23_INT_VDD5V_DROOP		64
-#define MX23_INT_DCDC4P2_BO		65
-
-/*
- * APBH DMA
- */
-#define MX23_DMA_SSP1			1
-#define MX23_DMA_SSP2			2
-#define MX23_DMA_GPMI0			4
-#define MX23_DMA_GPMI1			5
-#define MX23_DMA_GPMI2			6
-#define MX23_DMA_GPMI3			7
-
-/*
- * APBX DMA
- */
-#define MX23_DMA_ADC			0
-#define MX23_DMA_DAC			1
-#define MX23_DMA_SPDIF			2
-#define MX23_DMA_I2C			3
-#define MX23_DMA_SAIF0			4
-#define MX23_DMA_UART0_RX		6
-#define MX23_DMA_UART0_TX		7
-#define MX23_DMA_UART1_RX		8
-#define MX23_DMA_UART1_TX		9
-#define MX23_DMA_SAIF1			10
-
-#endif /* __MACH_MX23_H__ */

arch/arm/mach-mxs/include/mach/mx28.h

@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX28_H__
-#define __MACH_MX28_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX28_OCRAM_BASE_ADDR		0x00000000
-#define MX28_OCRAM_SIZE			SZ_128K
-
-/*
- * IO
- */
-#define MX28_IO_BASE_ADDR		0x80000000
-#define MX28_IO_SIZE			SZ_1M
-
-#define MX28_ICOLL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x000000)
-#define MX28_HSADC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x002000)
-#define MX28_APBH_DMA_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x004000)
-#define MX28_PERFMON_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x006000)
-#define MX28_BCH_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x00a000)
-#define MX28_GPMI_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x00c000)
-#define MX28_SSP0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x010000)
-#define MX28_SSP1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x012000)
-#define MX28_SSP2_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x014000)
-#define MX28_SSP3_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x016000)
-#define MX28_PINCTRL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x018000)
-#define MX28_DIGCTL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x01c000)
-#define MX28_ETM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x022000)
-#define MX28_APBX_DMA_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x024000)
-#define MX28_DCP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x028000)
-#define MX28_PXP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02a000)
-#define MX28_OCOTP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02c000)
-#define MX28_AXI_AHB0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02e000)
-#define MX28_LCDIF_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x030000)
-#define MX28_CAN0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x032000)
-#define MX28_CAN1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x034000)
-#define MX28_SIMDBG_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c000)
-#define MX28_SIMGPMISEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c200)
-#define MX28_SIMSSPSEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c300)
-#define MX28_SIMMEMSEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c400)
-#define MX28_GPIOMON_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c500)
-#define MX28_SIMENET_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c700)
-#define MX28_ARMJTAG_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c800)
-#define MX28_CLKCTRL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x040000)
-#define MX28_SAIF0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x042000)
-#define MX28_POWER_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x044000)
-#define MX28_SAIF1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x046000)
-#define MX28_LRADC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x050000)
-#define MX28_SPDIF_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x054000)
-#define MX28_RTC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x056000)
-#define MX28_I2C0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x058000)
-#define MX28_I2C1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x05a000)
-#define MX28_PWM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x064000)
-#define MX28_TIMROT_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x068000)
-#define MX28_AUART0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06a000)
-#define MX28_AUART1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06c000)
-#define MX28_AUART2_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06e000)
-#define MX28_AUART3_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x070000)
-#define MX28_AUART4_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x072000)
-#define MX28_DUART_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x074000)
-#define MX28_USBPHY0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x07C000)
-#define MX28_USBPHY1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x07e000)
-#define MX28_USBCTRL0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x080000)
-#define MX28_USBCTRL1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x090000)
-#define MX28_DFLPT_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x0c0000)
-#define MX28_DRAM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x0e0000)
-#define MX28_ENET_MAC0_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x0f0000)
-#define MX28_ENET_MAC1_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x0f4000)
-
-#define MX28_IO_P2V(x)			MXS_IO_P2V(x)
-#define MX28_IO_ADDRESS(x)		IOMEM(MX28_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX28_INT_BATT_BRNOUT		0
-#define MX28_INT_VDDD_BRNOUT		1
-#define MX28_INT_VDDIO_BRNOUT		2
-#define MX28_INT_VDDA_BRNOUT		3
-#define MX28_INT_VDD5V_DROOP		4
-#define MX28_INT_DCDC4P2_BRNOUT		5
-#define MX28_INT_VDD5V			6
-#define MX28_INT_CAN0			8
-#define MX28_INT_CAN1			9
-#define MX28_INT_LRADC_TOUCH		10
-#define MX28_INT_HSADC			13
-#define MX28_INT_LRADC_THRESH0		14
-#define MX28_INT_LRADC_THRESH1		15
-#define MX28_INT_LRADC_CH0		16
-#define MX28_INT_LRADC_CH1		17
-#define MX28_INT_LRADC_CH2		18
-#define MX28_INT_LRADC_CH3		19
-#define MX28_INT_LRADC_CH4		20
-#define MX28_INT_LRADC_CH5		21
-#define MX28_INT_LRADC_CH6		22
-#define MX28_INT_LRADC_CH7		23
-#define MX28_INT_LRADC_BUTTON0		24
-#define MX28_INT_LRADC_BUTTON1		25
-#define MX28_INT_PERFMON		27
-#define MX28_INT_RTC_1MSEC		28
-#define MX28_INT_RTC_ALARM		29
-#define MX28_INT_COMMS			31
-#define MX28_INT_EMI_ERR		32
-#define MX28_INT_LCDIF			38
-#define MX28_INT_PXP			39
-#define MX28_INT_BCH			41
-#define MX28_INT_GPMI			42
-#define MX28_INT_SPDIF_ERROR		45
-#define MX28_INT_DUART			47
-#define MX28_INT_TIMER0			48
-#define MX28_INT_TIMER1			49
-#define MX28_INT_TIMER2			50
-#define MX28_INT_TIMER3			51
-#define MX28_INT_DCP_VMI		52
-#define MX28_INT_DCP			53
-#define MX28_INT_DCP_SECURE		54
-#define MX28_INT_SAIF1			58
-#define MX28_INT_SAIF0			59
-#define MX28_INT_SPDIF_DMA		66
-#define MX28_INT_I2C0_DMA		68
-#define MX28_INT_I2C1_DMA		69
-#define MX28_INT_AUART0_RX_DMA		70
-#define MX28_INT_AUART0_TX_DMA		71
-#define MX28_INT_AUART1_RX_DMA		72
-#define MX28_INT_AUART1_TX_DMA		73
-#define MX28_INT_AUART2_RX_DMA		74
-#define MX28_INT_AUART2_TX_DMA		75
-#define MX28_INT_AUART3_RX_DMA		76
-#define MX28_INT_AUART3_TX_DMA		77
-#define MX28_INT_AUART4_RX_DMA		78
-#define MX28_INT_AUART4_TX_DMA		79
-#define MX28_INT_SAIF0_DMA		80
-#define MX28_INT_SAIF1_DMA		81
-#define MX28_INT_SSP0_DMA		82
-#define MX28_INT_SSP1_DMA		83
-#define MX28_INT_SSP2_DMA		84
-#define MX28_INT_SSP3_DMA		85
-#define MX28_INT_LCDIF_DMA		86
-#define MX28_INT_HSADC_DMA		87
-#define MX28_INT_GPMI_DMA		88
-#define MX28_INT_DIGCTL_DEBUG_TRAP	89
-#define MX28_INT_USB1			92
-#define MX28_INT_USB0			93
-#define MX28_INT_USB1_WAKEUP		94
-#define MX28_INT_USB0_WAKEUP		95
-#define MX28_INT_SSP0_ERROR		96
-#define MX28_INT_SSP1_ERROR		97
-#define MX28_INT_SSP2_ERROR		98
-#define MX28_INT_SSP3_ERROR		99
-#define MX28_INT_ENET_SWI		100
-#define MX28_INT_ENET_MAC0		101
-#define MX28_INT_ENET_MAC1		102
-#define MX28_INT_ENET_MAC0_1588		103
-#define MX28_INT_ENET_MAC1_1588		104
-#define MX28_INT_I2C1_ERROR		110
-#define MX28_INT_I2C0_ERROR		111
-#define MX28_INT_AUART0			112
-#define MX28_INT_AUART1			113
-#define MX28_INT_AUART2			114
-#define MX28_INT_AUART3			115
-#define MX28_INT_AUART4			116
-#define MX28_INT_GPIO4			123
-#define MX28_INT_GPIO3			124
-#define MX28_INT_GPIO2			125
-#define MX28_INT_GPIO1			126
-#define MX28_INT_GPIO0			127
-
-/*
- * APBH DMA
- */
-#define MX28_DMA_SSP0			0
-#define MX28_DMA_SSP1			1
-#define MX28_DMA_SSP2			2
-#define MX28_DMA_SSP3			3
-#define MX28_DMA_GPMI0			4
-#define MX28_DMA_GPMI1			5
-#define MX28_DMA_GPMI2			6
-#define MX28_DMA_GPMI3			7
-#define MX28_DMA_GPMI4			8
-#define MX28_DMA_GPMI5			9
-#define MX28_DMA_GPMI6			10
-#define MX28_DMA_GPMI7			11
-#define MX28_DMA_HSADC			12
-#define MX28_DMA_LCDIF			13
-
-/*
- * APBX DMA
- */
-#define MX28_DMA_AUART4_RX		0
-#define MX28_DMA_AUART4_TX		1
-#define MX28_DMA_SPDIF_TX		2
-#define MX28_DMA_SAIF0			4
-#define MX28_DMA_SAIF1			5
-#define MX28_DMA_I2C0			6
-#define MX28_DMA_I2C1			7
-#define MX28_DMA_AUART0_RX		8
-#define MX28_DMA_AUART0_TX		9
-#define MX28_DMA_AUART1_RX		10
-#define MX28_DMA_AUART1_TX		11
-#define MX28_DMA_AUART2_RX		12
-#define MX28_DMA_AUART2_TX		13
-#define MX28_DMA_AUART3_RX		14
-#define MX28_DMA_AUART3_TX		15
-
-#endif /* __MACH_MX28_H__ */

arch/arm/mach-mxs/include/mach/mxs.h

@@ -1,117 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_H__
-#define __MACH_MXS_H__
-
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-#include <asm/mach-types.h>
-#include <mach/digctl.h>
-#include <mach/hardware.h>
-
-/*
- * IO addresses common to MXS-based
- */
-#define MXS_IO_BASE_ADDR		0x80000000
-#define MXS_IO_SIZE			SZ_1M
-
-#define MXS_ICOLL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x000000)
-#define MXS_APBH_DMA_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x004000)
-#define MXS_BCH_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x00a000)
-#define MXS_GPMI_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x00c000)
-#define MXS_PINCTRL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x018000)
-#define MXS_DIGCTL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x01c000)
-#define MXS_APBX_DMA_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x024000)
-#define MXS_DCP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x028000)
-#define MXS_PXP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02a000)
-#define MXS_OCOTP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02c000)
-#define MXS_AXI_AHB0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02e000)
-#define MXS_LCDIF_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x030000)
-#define MXS_CLKCTRL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x040000)
-#define MXS_SAIF0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x042000)
-#define MXS_POWER_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x044000)
-#define MXS_SAIF1_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x046000)
-#define MXS_LRADC_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x050000)
-#define MXS_SPDIF_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x054000)
-#define MXS_I2C0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x058000)
-#define MXS_PWM_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x064000)
-#define MXS_TIMROT_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x068000)
-#define MXS_AUART1_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x06c000)
-#define MXS_AUART2_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x06e000)
-#define MXS_DRAM_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x0e0000)
-
-/*
- * It maps the whole address space to [0xf4000000, 0xf50fffff].
- *
- *	OCRAM	0x00000000+0x020000	->	0xf4000000+0x020000
- *	IO	0x80000000+0x100000	->	0xf5000000+0x100000
- */
-#define MXS_IO_P2V(x)	(0xf4000000 +					\
-			(((x) & 0x80000000) >> 7) +			\
-			(((x) & 0x000fffff)))
-
-#define MXS_IO_ADDRESS(x)	IOMEM(MXS_IO_P2V(x))
-
-#define mxs_map_entry(soc, name, _type)	{				\
-	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
-	.pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR),		\
-	.length = soc ## _ ## name ## _SIZE,				\
-	.type = _type,							\
-}
-
-#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
-
-#define MXS_SET_ADDR		0x4
-#define MXS_CLR_ADDR		0x8
-#define MXS_TOG_ADDR		0xc
-
-#ifndef __ASSEMBLER__
-static inline void __mxs_setl(u32 mask, void __iomem *reg)
-{
-	__raw_writel(mask, reg + MXS_SET_ADDR);
-}
-
-static inline void __mxs_clrl(u32 mask, void __iomem *reg)
-{
-	__raw_writel(mask, reg + MXS_CLR_ADDR);
-}
-
-static inline void __mxs_togl(u32 mask, void __iomem *reg)
-{
-	__raw_writel(mask, reg + MXS_TOG_ADDR);
-}
-
-/*
- * MXS CPU types
- */
-#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID)
-
-static inline int cpu_is_mx23(void)
-{
-	return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780);
-}
-
-static inline int cpu_is_mx28(void)
-{
-	return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800);
-}
-#endif
-
-#endif /* __MACH_MXS_H__ */

arch/arm/mach-mxs/mach-mxs.c

@@ -11,22 +11,53 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
+#include <linux/clocksource.h>
 #include <linux/can/platform/flexcan.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mxs.h>
 #include <linux/micrel_phy.h>
 #include <linux/mxsfb.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/pinctrl/consumer.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/mxs.h>
+#include <asm/system_misc.h>
+
+/* MXS DIGCTL SAIF CLKMUX */
+#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
+#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
+
+#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
+
+#define MXS_SET_ADDR		0x4
+#define MXS_CLR_ADDR		0x8
+#define MXS_TOG_ADDR		0xc
+
+static inline void __mxs_setl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_SET_ADDR);
+}
+
+static inline void __mxs_clrl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_CLR_ADDR);
+}
+
+static inline void __mxs_togl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_TOG_ADDR);
+}
 
 static struct fb_videomode mx23evk_video_modes[] = {
 	{
@@ -41,8 +72,6 @@ static struct fb_videomode mx23evk_video_modes[] = {
 		.lower_margin	= 4,
 		.hsync_len	= 1,
 		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
 	},
 };
 
@@ -59,8 +88,6 @@ static struct fb_videomode mx28evk_video_modes[] = {
 		.lower_margin	= 10,
 		.hsync_len	= 10,
 		.vsync_len	= 10,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
 	},
 };
 
@@ -77,7 +104,6 @@ static struct fb_videomode m28evk_video_modes[] = {
 		.lower_margin	= 45,
 		.hsync_len	= 1,
 		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
 	},
 };
 
@@ -94,9 +120,7 @@ static struct fb_videomode apx4devkit_video_modes[] = {
 		.lower_margin	= 13,
 		.hsync_len	= 48,
 		.vsync_len	= 3,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
-				  FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	},
 };
 
@@ -113,9 +137,7 @@ static struct fb_videomode apf28dev_video_modes[] = {
 		.lower_margin = 0x15,
 		.hsync_len = 64,
 		.vsync_len = 4,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
-				FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				FB_SYNC_DOTCLK_FAILING_ACT,
+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	},
 };
 
@@ -132,7 +154,6 @@ static struct fb_videomode cfa10049_video_modes[] = {
 		.lower_margin	= 2,
 		.hsync_len	= 15,
 		.vsync_len	= 15,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT
 	},
 };
 
@@ -175,14 +196,80 @@ static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
 	{ /* sentinel */ }
 };
 
-static void __init imx23_timer_init(void)
-{
-	mx23_clocks_init();
-}
+#define OCOTP_WORD_OFFSET		0x20
+#define OCOTP_WORD_COUNT		0x20
+
+#define BM_OCOTP_CTRL_BUSY		(1 << 8)
+#define BM_OCOTP_CTRL_ERROR		(1 << 9)
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
 
-static void __init imx28_timer_init(void)
+static DEFINE_MUTEX(ocotp_mutex);
+static u32 ocotp_words[OCOTP_WORD_COUNT];
+
+static const u32 *mxs_get_ocotp(void)
 {
-	mx28_clocks_init();
+	struct device_node *np;
+	void __iomem *ocotp_base;
+	int timeout = 0x400;
+	size_t i;
+	static int once;
+
+	if (once)
+		return ocotp_words;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
+	ocotp_base = of_iomap(np, 0);
+	WARN_ON(!ocotp_base);
+
+	mutex_lock(&ocotp_mutex);
+
+	/*
+	 * clk_enable(hbus_clk) for ocotp can be skipped
+	 * as it must be on when system is running.
+	 */
+
+	/* try to clear ERROR bit */
+	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
+
+	/* check both BUSY and ERROR cleared */
+	while ((__raw_readl(ocotp_base) &
+		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		goto error_unlock;
+
+	/* open OCOTP banks for read */
+	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	/* approximately wait 32 hclk cycles */
+	udelay(1);
+
+	/* poll BUSY bit becoming cleared */
+	timeout = 0x400;
+	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		goto error_unlock;
+
+	for (i = 0; i < OCOTP_WORD_COUNT; i++)
+		ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
+						i * 0x10);
+
+	/* close banks for power saving */
+	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	once = 1;
+
+	mutex_unlock(&ocotp_mutex);
+
+	return ocotp_words;
+
+error_unlock:
+	mutex_unlock(&ocotp_mutex);
+	pr_err("%s: timeout in reading OCOTP\n", __func__);
+	return NULL;
 }
 
 enum mac_oui {
@@ -259,6 +346,8 @@ static void __init imx23_evk_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+				MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 static inline void enable_clk_enet_out(void)
@@ -278,6 +367,8 @@ static void __init imx28_evk_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+				MXSFB_SYNC_DOTCLK_FAILING_ACT;
 
 	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
@@ -297,6 +388,7 @@ static void __init m28evk_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
 	mxsfb_pdata.default_bpp = 16;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
 }
 
 static void __init sc_sps1_init(void)
@@ -322,6 +414,8 @@ static void __init apx4devkit_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+				MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 #define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
@@ -407,6 +501,7 @@ static void __init cfa10049_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
 }
 
 static void __init cfa10037_init(void)
@@ -423,6 +518,8 @@ static void __init apf28_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
 	mxsfb_pdata.default_bpp = 16;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+				MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 static void __init mxs_machine_init(void)
@@ -454,32 +551,62 @@ static void __init mxs_machine_init(void)
 		imx28_evk_post_init();
 }
 
-static const char *imx23_dt_compat[] __initdata = {
-	"fsl,imx23",
-	NULL,
-};
+#define MX23_CLKCTRL_RESET_OFFSET	0x120
+#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
+#define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+static void mxs_restart(char mode, const char *cmd)
+{
+	struct device_node *np;
+	void __iomem *reset_addr;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+	reset_addr = of_iomap(np, 0);
+	if (!reset_addr)
+		goto soft;
+
+	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
+		reset_addr += MX23_CLKCTRL_RESET_OFFSET;
+	else
+		reset_addr += MX28_CLKCTRL_RESET_OFFSET;
 
-static const char *imx28_dt_compat[] __initdata = {
+	/* reset the chip */
+	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
+
+	pr_err("Failed to assert the chip reset\n");
+
+	/* Delay to allow the serial port to show the message */
+	mdelay(50);
+
+soft:
+	/* We'll take a jump through zero as a poor second */
+	soft_restart(0);
+}
+
+static void __init mxs_timer_init(void)
+{
+	if (of_machine_is_compatible("fsl,imx23"))
+		mx23_clocks_init();
+	else
+		mx28_clocks_init();
+	clocksource_of_init();
+}
+
+static const char *mxs_dt_compat[] __initdata = {
 	"fsl,imx28",
+	"fsl,imx23",
 	NULL,
 };
 
-DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
-	.map_io		= mx23_map_io,
-	.init_irq	= icoll_init_irq,
-	.handle_irq	= icoll_handle_irq,
-	.init_time	= imx23_timer_init,
-	.init_machine	= mxs_machine_init,
-	.dt_compat	= imx23_dt_compat,
-	.restart	= mxs_restart,
-MACHINE_END
-
-DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
-	.map_io		= mx28_map_io,
-	.init_irq	= icoll_init_irq,
+DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
+	.map_io		= debug_ll_io_init,
+	.init_irq	= irqchip_init,
 	.handle_irq	= icoll_handle_irq,
-	.init_time	= imx28_timer_init,
+	.init_time	= mxs_timer_init,
 	.init_machine	= mxs_machine_init,
-	.dt_compat	= imx28_dt_compat,
+	.dt_compat	= mxs_dt_compat,
 	.restart	= mxs_restart,
 MACHINE_END

arch/arm/mach-mxs/mm.c

@@ -1,52 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License.  You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/common.h>
-
-/*
- * Define the MX23 memory map.
- */
-static struct map_desc mx23_io_desc[] __initdata = {
-	mxs_map_entry(MX23, OCRAM, MT_DEVICE),
-	mxs_map_entry(MX23, IO, MT_DEVICE),
-};
-
-/*
- * Define the MX28 memory map.
- */
-static struct map_desc mx28_io_desc[] __initdata = {
-	mxs_map_entry(MX28, OCRAM, MT_DEVICE),
-	mxs_map_entry(MX28, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx23_map_io(void)
-{
-	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
-}
-
-void __init mx28_map_io(void)
-{
-	iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
-}

arch/arm/mach-mxs/ocotp.c

@@ -1,93 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-
-#include <asm/processor.h>	/* for cpu_relax() */
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define OCOTP_WORD_OFFSET		0x20
-#define OCOTP_WORD_COUNT		0x20
-
-#define BM_OCOTP_CTRL_BUSY		(1 << 8)
-#define BM_OCOTP_CTRL_ERROR		(1 << 9)
-#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
-
-static DEFINE_MUTEX(ocotp_mutex);
-static u32 ocotp_words[OCOTP_WORD_COUNT];
-
-const u32 *mxs_get_ocotp(void)
-{
-	void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR);
-	int timeout = 0x400;
-	size_t i;
-	static int once = 0;
-
-	if (once)
-		return ocotp_words;
-
-	mutex_lock(&ocotp_mutex);
-
-	/*
-	 * clk_enable(hbus_clk) for ocotp can be skipped
-	 * as it must be on when system is running.
-	 */
-
-	/* try to clear ERROR bit */
-	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
-
-	/* check both BUSY and ERROR cleared */
-	while ((__raw_readl(ocotp_base) &
-		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		goto error_unlock;
-
-	/* open OCOTP banks for read */
-	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
-	/* approximately wait 32 hclk cycles */
-	udelay(1);
-
-	/* poll BUSY bit becoming cleared */
-	timeout = 0x400;
-	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		goto error_unlock;
-
-	for (i = 0; i < OCOTP_WORD_COUNT; i++)
-		ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
-						i * 0x10);
-
-	/* close banks for power saving */
-	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
-	once = 1;
-
-	mutex_unlock(&ocotp_mutex);
-
-	return ocotp_words;
-
-error_unlock:
-	mutex_unlock(&ocotp_mutex);
-	pr_err("%s: timeout in reading OCOTP\n", __func__);
-	return NULL;
-}

arch/arm/mach-mxs/system.c

@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define MX23_CLKCTRL_RESET_OFFSET	0x120
-#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
-#define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
-
-#define MXS_MODULE_CLKGATE		(1 << 30)
-#define MXS_MODULE_SFTRST		(1 << 31)
-
-static void __iomem *mxs_clkctrl_reset_addr;
-
-/*
- * Reset the system. It is called by machine_restart().
- */
-void mxs_restart(char mode, const char *cmd)
-{
-	/* reset the chip */
-	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
-
-	pr_err("Failed to assert the chip reset\n");
-
-	/* Delay to allow the serial port to show the message */
-	mdelay(50);
-
-	/* We'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
-
-static int __init mxs_arch_reset_init(void)
-{
-	struct clk *clk;
-
-	mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) +
-				(cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET :
-						 MX28_CLKCTRL_RESET_OFFSET);
-
-	clk = clk_get_sys("rtc", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-
-	return 0;
-}
-core_initcall(mxs_arch_reset_init);
-
-/*
- * Clear the bit and poll it cleared.  This is usually called with
- * a reset address and mask being either SFTRST(bit 31) or CLKGATE
- * (bit 30).
- */
-static int clear_poll_bit(void __iomem *addr, u32 mask)
-{
-	int timeout = 0x400;
-
-	/* clear the bit */
-	__mxs_clrl(mask, addr);
-
-	/*
-	 * SFTRST needs 3 GPMI clocks to settle, the reference manual
-	 * recommends to wait 1us.
-	 */
-	udelay(1);
-
-	/* poll the bit becoming clear */
-	while ((__raw_readl(addr) & mask) && --timeout)
-		/* nothing */;
-
-	return !timeout;
-}
-
-int mxs_reset_block(void __iomem *reset_addr)
-{
-	int ret;
-	int timeout = 0x400;
-
-	/* clear and poll SFTRST */
-	ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
-	if (unlikely(ret))
-		goto error;
-
-	/* clear CLKGATE */
-	__mxs_clrl(MXS_MODULE_CLKGATE, reset_addr);
-
-	/* set SFTRST to reset the block */
-	__mxs_setl(MXS_MODULE_SFTRST, reset_addr);
-	udelay(1);
-
-	/* poll CLKGATE becoming set */
-	while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout)
-		/* nothing */;
-	if (unlikely(!timeout))
-		goto error;
-
-	/* clear and poll SFTRST */
-	ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
-	if (unlikely(ret))
-		goto error;
-
-	/* clear and poll CLKGATE */
-	ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE);
-	if (unlikely(ret))
-		goto error;
-
-	return 0;
-
-error:
-	pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
-	return -ETIMEDOUT;
-}
-EXPORT_SYMBOL(mxs_reset_block);

arch/arm/mach-s5pv210/clock.c

@@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = {
 	.name		= "pcmcdclk",
 };
 
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
 static struct clk *clkset_vpllsrc_list[] = {
 	[0] = &clk_fin_vpll,
 	[1] = &clk_sclk_hdmi27m,
@@ -305,18 +300,6 @@ static struct clk_ops clk_fout_apll_ops = {
 
 static struct clk init_clocks_off[] = {
 	{
-		.name		= "dma",
-		.devname	= "dma-pl330.0",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.1",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
 		.name		= "rot",
 		.parent		= &clk_hclk_dsys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
@@ -573,6 +556,20 @@ static struct clk clk_hsmmc3 = {
 	.ctrlbit	= (1<<19),
 };
 
+static struct clk clk_pdma0 = {
+	.name		= "pdma0",
+	.parent		= &clk_hclk_psys.clk,
+	.enable		= s5pv210_clk_ip0_ctrl,
+	.ctrlbit	= (1 << 3),
+};
+
+static struct clk clk_pdma1 = {
+	.name		= "pdma1",
+	.parent		= &clk_hclk_psys.clk,
+	.enable		= s5pv210_clk_ip0_ctrl,
+	.ctrlbit	= (1 << 4),
+};
+
 static struct clk *clkset_uart_list[] = {
 	[6] = &clk_mout_mpll.clk,
 	[7] = &clk_mout_epll.clk,
@@ -1075,6 +1072,8 @@ static struct clk *clk_cdev[] = {
 	&clk_hsmmc1,
 	&clk_hsmmc2,
 	&clk_hsmmc3,
+	&clk_pdma0,
+	&clk_pdma1,
 };
 
 /* Clock initialisation code */
@@ -1333,6 +1332,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
 	CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
 	CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
 };
 
 void __init s5pv210_register_clocks(void)
@@ -1361,6 +1362,5 @@ void __init s5pv210_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
 		s3c_disable_clocks(clk_cdev[ptr], 1);
 
-	s3c24xx_register_clock(&dummy_apb_pclk);
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5pv210/mach-goni.c

@@ -845,7 +845,7 @@ static struct fimc_source_info goni_camera_sensors[] = {
 		.mux_id		= 0,
 		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
 				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.bus_type	= FIMC_BUS_TYPE_ITU_601,
+		.fimc_bus_type	= FIMC_BUS_TYPE_ITU_601,
 		.board_info	= &noon010pc30_board_info,
 		.i2c_bus_num	= 0,
 		.clk_frequency	= 16000000UL,

arch/arm/mach-shmobile/board-marzen.c

@@ -32,6 +32,7 @@
 #include <linux/smsc911x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/sh_hspi.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/usb/otg.h>

arch/arm/net/bpf_jit_32.c

@@ -576,7 +576,7 @@ load_ind:
 			/* x = ((*(frame + k)) & 0xf) << 2; */
 			ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
 			/* the interpreter should deal with the negative K */
-			if (k < 0)
+			if ((int)k < 0)
 				return -1;
 			/* offset in r1: we might have to take the slow path */
 			emit_mov_i(r_off, k, ctx);

arch/arm64/Kconfig

@@ -9,7 +9,6 @@ config ARM64
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW

arch/arm64/Kconfig.debug

@@ -6,17 +6,6 @@ config FRAME_POINTER
 	bool
 	default y
 
-config DEBUG_ERRORS
-	bool "Verbose kernel error messages"
-	depends on DEBUG_KERNEL
-	help
-	  This option controls verbose debugging information which can be
-	  printed when the kernel detects an internal error. This debugging
-	  information is useful to kernel hackers when tracking down problems,
-	  but mostly meaningless to other people. It's safe to say Y unless
-	  you are concerned with the code size or don't want to see these
-	  messages.
-
 config DEBUG_STACK_USAGE
 	bool "Enable stack utilization instrumentation"
 	depends on DEBUG_KERNEL

arch/arm64/configs/defconfig

@@ -82,4 +82,3 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_DEBUG_ERRORS=y

arch/arm64/include/asm/ucontext.h

@@ -22,7 +22,7 @@ struct ucontext {
 	stack_t		  uc_stack;
 	sigset_t	  uc_sigmask;
 	/* glibc uses a 1024-bit sigset_t */
-	__u8		  __unused[(1024 - sizeof(sigset_t)) / 8];
+	__u8		  __unused[1024 / 8 - sizeof(sigset_t)];
 	/* last for future expansion */
 	struct sigcontext uc_mcontext;
 };

arch/arm64/kernel/arm64ksyms.c

@@ -40,7 +40,9 @@ EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
 
 	/* bitops */
+#ifdef CONFIG_SMP
 EXPORT_SYMBOL(__atomic_hash);
+#endif
 
 	/* physical memory */
 EXPORT_SYMBOL(memstart_addr);

arch/arm64/kernel/signal32.c

@@ -549,7 +549,6 @@ int compat_setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
 			  sigset_t *set, struct pt_regs *regs)
 {
 	struct compat_rt_sigframe __user *frame;
-	compat_stack_t stack;
 	int err = 0;
 
 	frame = compat_get_sigframe(ka, regs, sizeof(*frame));

arch/arm64/mm/mmu.c

@@ -261,7 +261,7 @@ static void __init create_mapping(phys_addr_t phys, unsigned long virt,
 void __iomem * __init early_io_map(phys_addr_t phys, unsigned long virt)
 {
 	unsigned long size, mask;
-	bool page64k = IS_ENABLED(ARM64_64K_PAGES);
+	bool page64k = IS_ENABLED(CONFIG_ARM64_64K_PAGES);
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;

arch/ia64/kernel/process.c

@@ -291,7 +291,6 @@ cpu_idle (void)
 		}
 
 		if (!need_resched()) {
-			void (*idle)(void);
 #ifdef CONFIG_SMP
 			min_xtp();
 #endif
@@ -299,9 +298,7 @@ cpu_idle (void)
 			if (mark_idle)
 				(*mark_idle)(1);
 
-			if (!idle)
-				idle = default_idle;
-			(*idle)();
+			default_idle();
 			if (mark_idle)
 				(*mark_idle)(0);
 #ifdef CONFIG_SMP

arch/powerpc/Kconfig

@@ -90,6 +90,7 @@ config GENERIC_GPIO
 config PPC
 	bool
 	default y
+	select BINFMT_ELF
 	select OF
 	select OF_EARLY_FLATTREE
 	select HAVE_FTRACE_MCOUNT_RECORD

arch/powerpc/include/asm/mmu-hash64.h

@@ -343,17 +343,16 @@ extern void slb_set_size(u16 size);
 /*
  * VSID allocation (256MB segment)
  *
- * We first generate a 38-bit "proto-VSID".  For kernel addresses this
- * is equal to the ESID | 1 << 37, for user addresses it is:
- *	(context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1)
+ * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
+ * from mmu context id and effective segment id of the address.
  *
- * This splits the proto-VSID into the below range
- *  0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range
- *  2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range
- *
- * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1
- * That is, we assign half of the space to user processes and half
- * to the kernel.
+ * For user processes max context id is limited to ((1ul << 19) - 5)
+ * for kernel space, we use the top 4 context ids to map address as below
+ * NOTE: each context only support 64TB now.
+ * 0x7fffc -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
  *
  * The proto-VSIDs are then scrambled into real VSIDs with the
  * multiplicative hash:
@@ -363,41 +362,49 @@ extern void slb_set_size(u16 size);
  * VSID_MULTIPLIER is prime, so in particular it is
  * co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
  * Because the modulus is 2^n-1 we can compute it efficiently without
- * a divide or extra multiply (see below).
- *
- * This scheme has several advantages over older methods:
- *
- *	- We have VSIDs allocated for every kernel address
- * (i.e. everything above 0xC000000000000000), except the very top
- * segment, which simplifies several things.
+ * a divide or extra multiply (see below). The scramble function gives
+ * robust scattering in the hash table (at least based on some initial
+ * results).
  *
- *	- We allow for USER_ESID_BITS significant bits of ESID and
- * CONTEXT_BITS  bits of context for user addresses.
- *  i.e. 64T (46 bits) of address space for up to half a million contexts.
+ * We also consider VSID 0 special. We use VSID 0 for slb entries mapping
+ * bad address. This enables us to consolidate bad address handling in
+ * hash_page.
  *
- *	- The scramble function gives robust scattering in the hash
- * table (at least based on some initial results).  The previous
- * method was more susceptible to pathological cases giving excessive
- * hash collisions.
+ * We also need to avoid the last segment of the last context, because that
+ * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
+ * because of the modulo operation in vsid scramble. But the vmemmap
+ * (which is what uses region 0xf) will never be close to 64TB in size
+ * (it's 56 bytes per page of system memory).
  */
 
+#define CONTEXT_BITS		19
+#define ESID_BITS		18
+#define ESID_BITS_1T		6
+
+/*
+ * 256MB segment
+ * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments
+ * available for user + kernel mapping. The top 4 contexts are used for
+ * kernel mapping. Each segment contains 2^28 bytes. Each
+ * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
+ * (19 == 37 + 28 - 46).
+ */
+#define MAX_USER_CONTEXT	((ASM_CONST(1) << CONTEXT_BITS) - 5)
+
 /*
  * This should be computed such that protovosid * vsid_mulitplier
  * doesn't overflow 64 bits. It should also be co-prime to vsid_modulus
  */
 #define VSID_MULTIPLIER_256M	ASM_CONST(12538073)	/* 24-bit prime */
-#define VSID_BITS_256M		38
+#define VSID_BITS_256M		(CONTEXT_BITS + ESID_BITS)
 #define VSID_MODULUS_256M	((1UL<<VSID_BITS_256M)-1)
 
 #define VSID_MULTIPLIER_1T	ASM_CONST(12538073)	/* 24-bit prime */
-#define VSID_BITS_1T		26
+#define VSID_BITS_1T		(CONTEXT_BITS + ESID_BITS_1T)
 #define VSID_MODULUS_1T		((1UL<<VSID_BITS_1T)-1)
 
-#define CONTEXT_BITS		19
-#define USER_ESID_BITS		18
-#define USER_ESID_BITS_1T	6
 
-#define USER_VSID_RANGE	(1UL << (USER_ESID_BITS + SID_SHIFT))
+#define USER_VSID_RANGE	(1UL << (ESID_BITS + SID_SHIFT))
 
 /*
  * This macro generates asm code to compute the VSID scramble
@@ -421,7 +428,8 @@ extern void slb_set_size(u16 size);
 	srdi	rx,rt,VSID_BITS_##size;					\
 	clrldi	rt,rt,(64-VSID_BITS_##size);				\
 	add	rt,rt,rx;		/* add high and low bits */	\
-	/* Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
+	/* NOTE: explanation based on VSID_BITS_##size = 36		\
+	 * Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
 	 * 2^36-1+2^28-1.  That in particular means that if r3 >=	\
 	 * 2^36-1, then r3+1 has the 2^36 bit set.  So, if r3+1 has	\
 	 * the bit clear, r3 already has the answer we want, if it	\
@@ -513,34 +521,6 @@ typedef struct {
 	})
 #endif /* 1 */
 
-/*
- * This is only valid for addresses >= PAGE_OFFSET
- * The proto-VSID space is divided into two class
- * User:   0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1
- * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1
- *
- * With KERNEL_START at 0xc000000000000000, the proto vsid for
- * the kernel ends up with 0xc00000000 (36 bits). With 64TB
- * support we need to have kernel proto-VSID in the
- * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS.
- */
-static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
-{
-	unsigned long proto_vsid;
-	/*
-	 * We need to make sure proto_vsid for the kernel is
-	 * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T])
-	 */
-	if (ssize == MMU_SEGSIZE_256M) {
-		proto_vsid = ea >> SID_SHIFT;
-		proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS));
-		return vsid_scramble(proto_vsid, 256M);
-	}
-	proto_vsid = ea >> SID_SHIFT_1T;
-	proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T));
-	return vsid_scramble(proto_vsid, 1T);
-}
-
 /* Returns the segment size indicator for a user address */
 static inline int user_segment_size(unsigned long addr)
 {
@@ -550,17 +530,41 @@ static inline int user_segment_size(unsigned long addr)
 	return MMU_SEGSIZE_256M;
 }
 
-/* This is only valid for user addresses (which are below 2^44) */
 static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
 				     int ssize)
 {
+	/*
+	 * Bad address. We return VSID 0 for that
+	 */
+	if ((ea & ~REGION_MASK) >= PGTABLE_RANGE)
+		return 0;
+
 	if (ssize == MMU_SEGSIZE_256M)
-		return vsid_scramble((context << USER_ESID_BITS)
+		return vsid_scramble((context << ESID_BITS)
 				     | (ea >> SID_SHIFT), 256M);
-	return vsid_scramble((context << USER_ESID_BITS_1T)
+	return vsid_scramble((context << ESID_BITS_1T)
 			     | (ea >> SID_SHIFT_1T), 1T);
 }
 
+/*
+ * This is only valid for addresses >= PAGE_OFFSET
+ *
+ * For kernel space, we use the top 4 context ids to map address as below
+ * 0x7fffc -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
+ */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+	unsigned long context;
+
+	/*
+	 * kernel take the top 4 context from the available range
+	 */
+	context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1;
+	return get_vsid(context, ea, ssize);
+}
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_MMU_HASH64_H_ */

arch/powerpc/kernel/cputable.c

@@ -275,7 +275,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,

arch/powerpc/kernel/epapr_paravirt.c

@@ -23,8 +23,10 @@
 #include <asm/code-patching.h>
 #include <asm/machdep.h>
 
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
 extern void epapr_ev_idle(void);
 extern u32 epapr_ev_idle_start[];
+#endif
 
 bool epapr_paravirt_enabled;
 
@@ -47,11 +49,15 @@ static int __init epapr_paravirt_init(void)
 
 	for (i = 0; i < (len / 4); i++) {
 		patch_instruction(epapr_hypercall_start + i, insts[i]);
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
 		patch_instruction(epapr_ev_idle_start + i, insts[i]);
+#endif
 	}
 
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
 	if (of_get_property(hyper_node, "has-idle", NULL))
 		ppc_md.power_save = epapr_ev_idle;
+#endif
 
 	epapr_paravirt_enabled = true;
 

arch/powerpc/kernel/exceptions-64s.S

@@ -1066,78 +1066,6 @@ unrecov_user_slb:
 #endif /* __DISABLED__ */
 
 
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
-	mflr	r10
-#ifdef CONFIG_RELOCATABLE
-	mtctr	r11
-#endif
-
-	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
-	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
-
-	bl	.slb_allocate_realmode
-
-	/* All done -- return from exception. */
-
-	ld	r10,PACA_EXSLB+EX_LR(r13)
-	ld	r3,PACA_EXSLB+EX_R3(r13)
-	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
-
-	mtlr	r10
-
-	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
-	beq-	2f
-
-.machine	push
-.machine	"power4"
-	mtcrf	0x80,r9
-	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
-.machine	pop
-
-	RESTORE_PPR_PACA(PACA_EXSLB, r9)
-	ld	r9,PACA_EXSLB+EX_R9(r13)
-	ld	r10,PACA_EXSLB+EX_R10(r13)
-	ld	r11,PACA_EXSLB+EX_R11(r13)
-	ld	r12,PACA_EXSLB+EX_R12(r13)
-	ld	r13,PACA_EXSLB+EX_R13(r13)
-	rfid
-	b	.	/* prevent speculative execution */
-
-2:	mfspr	r11,SPRN_SRR0
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10,unrecov_slb)
-	mtspr	SPRN_SRR0,r10
-	ld	r10,PACAKMSR(r13)
-	mtspr	SPRN_SRR1,r10
-	rfid
-	b	.
-
-unrecov_slb:
-	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
-	DISABLE_INTS
-	bl	.save_nvgprs
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
-	b	1b
-
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
-	andc	r9,r9,r10
-	std	r9,TI_LOCAL_FLAGS(r11)
-	ld	r10,_LINK(r1)		/* make idle task do the */
-	std	r10,_NIP(r1)		/* equivalent of a blr */
-	blr
-#endif
-
 	.align	7
 	.globl alignment_common
 alignment_common:
@@ -1335,6 +1263,78 @@ _GLOBAL(opal_mc_secondary_handler)
 #endif /* CONFIG_PPC_POWERNV */
 
 
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+	mflr	r10
+#ifdef CONFIG_RELOCATABLE
+	mtctr	r11
+#endif
+
+	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
+	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
+
+	bl	.slb_allocate_realmode
+
+	/* All done -- return from exception. */
+
+	ld	r10,PACA_EXSLB+EX_LR(r13)
+	ld	r3,PACA_EXSLB+EX_R3(r13)
+	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
+
+	mtlr	r10
+
+	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
+	beq-	2f
+
+.machine	push
+.machine	"power4"
+	mtcrf	0x80,r9
+	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
+.machine	pop
+
+	RESTORE_PPR_PACA(PACA_EXSLB, r9)
+	ld	r9,PACA_EXSLB+EX_R9(r13)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	ld	r11,PACA_EXSLB+EX_R11(r13)
+	ld	r12,PACA_EXSLB+EX_R12(r13)
+	ld	r13,PACA_EXSLB+EX_R13(r13)
+	rfid
+	b	.	/* prevent speculative execution */
+
+2:	mfspr	r11,SPRN_SRR0
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10,unrecov_slb)
+	mtspr	SPRN_SRR0,r10
+	ld	r10,PACAKMSR(r13)
+	mtspr	SPRN_SRR1,r10
+	rfid
+	b	.
+
+unrecov_slb:
+	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+	DISABLE_INTS
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+	andc	r9,r9,r10
+	std	r9,TI_LOCAL_FLAGS(r11)
+	ld	r10,_LINK(r1)		/* make idle task do the */
+	std	r10,_NIP(r1)		/* equivalent of a blr */
+	blr
+#endif
+
 /*
  * Hash table stuff
  */
@@ -1452,20 +1452,36 @@ do_ste_alloc:
 _GLOBAL(do_stab_bolted)
 	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
 	std	r11,PACA_EXSLB+EX_SRR0(r13)	/* save SRR0 in exc. frame */
+	mfspr	r11,SPRN_DAR			/* ea */
 
+	/*
+	 * check for bad kernel/user address
+	 * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+	 */
+	rldicr. r9,r11,4,(63 - 46 - 4)
+	li	r9,0	/* VSID = 0 for bad address */
+	bne-	0f
+
+	/*
+	 * Calculate VSID:
+	 * This is the kernel vsid, we take the top for context from
+	 * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+	 * Here we know that (ea >> 60) == 0xc
+	 */
+	lis	r9,(MAX_USER_CONTEXT + 1)@ha
+	addi	r9,r9,(MAX_USER_CONTEXT + 1)@l
+
+	srdi	r10,r11,SID_SHIFT
+	rldimi  r10,r9,ESID_BITS,0 /* proto vsid */
+	ASM_VSID_SCRAMBLE(r10, r9, 256M)
+	rldic	r9,r10,12,16	/* r9 = vsid << 12 */
+
+0:
 	/* Hash to the primary group */
 	ld	r10,PACASTABVIRT(r13)
-	mfspr	r11,SPRN_DAR
-	srdi	r11,r11,28
+	srdi	r11,r11,SID_SHIFT
 	rldimi	r10,r11,7,52	/* r10 = first ste of the group */
 
-	/* Calculate VSID */
-	/* This is a kernel address, so protovsid = ESID | 1 << 37 */
-	li	r9,0x1
-	rldimi  r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0
-	ASM_VSID_SCRAMBLE(r11, r9, 256M)
-	rldic	r9,r11,12,16	/* r9 = vsid << 12 */
-
 	/* Search the primary group for a free entry */
 1:	ld	r11,0(r10)	/* Test valid bit of the current ste	*/
 	andi.	r11,r11,0x80

arch/powerpc/kernel/prom_init.c

@@ -2832,11 +2832,13 @@ static void unreloc_toc(void)
 {
 }
 #else
-static void __reloc_toc(void *tocstart, unsigned long offset,
-			unsigned long nr_entries)
+static void __reloc_toc(unsigned long offset, unsigned long nr_entries)
 {
 	unsigned long i;
-	unsigned long *toc_entry = (unsigned long *)tocstart;
+	unsigned long *toc_entry;
+
+	/* Get the start of the TOC by using r2 directly. */
+	asm volatile("addi %0,2,-0x8000" : "=b" (toc_entry));
 
 	for (i = 0; i < nr_entries; i++) {
 		*toc_entry = *toc_entry + offset;
@@ -2850,8 +2852,7 @@ static void reloc_toc(void)
 	unsigned long nr_entries =
 		(__prom_init_toc_end - __prom_init_toc_start) / sizeof(long);
 
-	/* Need to add offset to get at __prom_init_toc_start */
-	__reloc_toc(__prom_init_toc_start + offset, offset, nr_entries);
+	__reloc_toc(offset, nr_entries);
 
 	mb();
 }
@@ -2864,8 +2865,7 @@ static void unreloc_toc(void)
 
 	mb();
 
-	/* __prom_init_toc_start has been relocated, no need to add offset */
-	__reloc_toc(__prom_init_toc_start, -offset, nr_entries);
+	__reloc_toc(-offset, nr_entries);
 }
 #endif
 #endif

arch/powerpc/kernel/ptrace.c

@@ -1428,6 +1428,7 @@ static long ppc_set_hwdebug(struct task_struct *child,
 
 	brk.address = bp_info->addr & ~7UL;
 	brk.type = HW_BRK_TYPE_TRANSLATE;
+	brk.len = 8;
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
 		brk.type |= HW_BRK_TYPE_READ;
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)

arch/powerpc/kvm/book3s_64_mmu_host.c

@@ -326,8 +326,8 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
 	vcpu3s->context_id[0] = err;
 
 	vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
-				  << USER_ESID_BITS) - 1;
-	vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+				  << ESID_BITS) - 1;
+	vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << ESID_BITS;
 	vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;
 
 	kvmppc_mmu_hpte_init(vcpu);

arch/powerpc/mm/hash_utils_64.c

@@ -195,6 +195,11 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		unsigned long vpn  = hpt_vpn(vaddr, vsid, ssize);
 		unsigned long tprot = prot;
 
+		/*
+		 * If we hit a bad address return error.
+		 */
+		if (!vsid)
+			return -1;
 		/* Make kernel text executable */
 		if (overlaps_kernel_text(vaddr, vaddr + step))
 			tprot &= ~HPTE_R_N;
@@ -759,6 +764,8 @@ void __init early_init_mmu(void)
 	/* Initialize stab / SLB management */
 	if (mmu_has_feature(MMU_FTR_SLB))
 		slb_initialize();
+	else
+		stab_initialize(get_paca()->stab_real);
 }
 
 #ifdef CONFIG_SMP
@@ -922,11 +929,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
 		ea, access, trap);
 
-	if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) {
-		DBG_LOW(" out of pgtable range !\n");
- 		return 1;
-	}
-
 	/* Get region & vsid */
  	switch (REGION_ID(ea)) {
 	case USER_REGION_ID:
@@ -957,6 +959,11 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	}
 	DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
 
+	/* Bad address. */
+	if (!vsid) {
+		DBG_LOW("Bad address!\n");
+		return 1;
+	}
 	/* Get pgdir */
 	pgdir = mm->pgd;
 	if (pgdir == NULL)
@@ -1126,6 +1133,8 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	/* Get VSID */
 	ssize = user_segment_size(ea);
 	vsid = get_vsid(mm->context.id, ea, ssize);
+	if (!vsid)
+		return;
 
 	/* Hash doesn't like irqs */
 	local_irq_save(flags);
@@ -1233,6 +1242,9 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
 	hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
 	hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
+	/* Don't create HPTE entries for bad address */
+	if (!vsid)
+		return;
 	ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr),
 				 mode, HPTE_V_BOLTED,
 				 mmu_linear_psize, mmu_kernel_ssize);

arch/powerpc/mm/mmu_context_hash64.c

@@ -29,15 +29,6 @@
 static DEFINE_SPINLOCK(mmu_context_lock);
 static DEFINE_IDA(mmu_context_ida);
 
-/*
- * 256MB segment
- * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments
- * available for user mappings. Each segment contains 2^28 bytes. Each
- * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
- * (19 == 37 + 28 - 46).
- */
-#define MAX_CONTEXT	((1UL << CONTEXT_BITS) - 1)
-
 int __init_new_context(void)
 {
 	int index;
@@ -56,7 +47,7 @@ again:
 	else if (err)
 		return err;
 
-	if (index > MAX_CONTEXT) {
+	if (index > MAX_USER_CONTEXT) {
 		spin_lock(&mmu_context_lock);
 		ida_remove(&mmu_context_ida, index);
 		spin_unlock(&mmu_context_lock);

arch/powerpc/mm/pgtable_64.c

@@ -61,7 +61,7 @@
 #endif
 
 #ifdef CONFIG_PPC_STD_MMU_64
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT))
 #error TASK_SIZE_USER64 exceeds user VSID range
 #endif
 #endif

arch/powerpc/mm/slb_low.S

@@ -31,10 +31,15 @@
  * No other registers are examined or changed.
  */
 _GLOBAL(slb_allocate_realmode)
-	/* r3 = faulting address */
+	/*
+	 * check for bad kernel/user address
+	 * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+	 */
+	rldicr. r9,r3,4,(63 - 46 - 4)
+	bne-	8f
 
 	srdi	r9,r3,60		/* get region */
-	srdi	r10,r3,28		/* get esid */
+	srdi	r10,r3,SID_SHIFT	/* get esid */
 	cmpldi	cr7,r9,0xc		/* cmp PAGE_OFFSET for later use */
 
 	/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
@@ -56,12 +61,14 @@ _GLOBAL(slb_allocate_realmode)
 	 */
 _GLOBAL(slb_miss_kernel_load_linear)
 	li	r11,0
-	li	r9,0x1
 	/*
-	 * for 1T we shift 12 bits more.  slb_finish_load_1T will do
-	 * the necessary adjustment
+	 * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+	 * r9 = region id.
 	 */
-	rldimi  r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+	addis	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+	addi	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
+
 BEGIN_FTR_SECTION
 	b	slb_finish_load
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
@@ -91,24 +98,19 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
 	_GLOBAL(slb_miss_kernel_load_io)
 	li	r11,0
 6:
-	li	r9,0x1
 	/*
-	 * for 1T we shift 12 bits more.  slb_finish_load_1T will do
-	 * the necessary adjustment
+	 * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+	 * r9 = region id.
 	 */
-	rldimi  r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+	addis	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+	addi	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
 BEGIN_FTR_SECTION
 	b	slb_finish_load
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load_1T
 
-0:	/* user address: proto-VSID = context << 15 | ESID. First check
-	 * if the address is within the boundaries of the user region
-	 */
-	srdi.	r9,r10,USER_ESID_BITS
-	bne-	8f			/* invalid ea bits set */
-
-
+0:
 	/* when using slices, we extract the psize off the slice bitmaps
 	 * and then we need to get the sllp encoding off the mmu_psize_defs
 	 * array.
@@ -164,15 +166,13 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	ld	r9,PACACONTEXTID(r13)
 BEGIN_FTR_SECTION
 	cmpldi	r10,0x1000
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
-	rldimi	r10,r9,USER_ESID_BITS,0
-BEGIN_FTR_SECTION
 	bge	slb_finish_load_1T
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load
 
 8:	/* invalid EA */
 	li	r10,0			/* BAD_VSID */
+	li	r9,0			/* BAD_VSID */
 	li	r11,SLB_VSID_USER	/* flags don't much matter */
 	b	slb_finish_load
 
@@ -221,8 +221,6 @@ _GLOBAL(slb_allocate_user)
 
 	/* get context to calculate proto-VSID */
 	ld	r9,PACACONTEXTID(r13)
-	rldimi	r10,r9,USER_ESID_BITS,0
-
 	/* fall through slb_finish_load */
 
 #endif /* __DISABLED__ */
@@ -231,9 +229,10 @@ _GLOBAL(slb_allocate_user)
 /*
  * Finish loading of an SLB entry and return
  *
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
+ * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
  */
 slb_finish_load:
+	rldimi  r10,r9,ESID_BITS,0
 	ASM_VSID_SCRAMBLE(r10,r9,256M)
 	/*
 	 * bits above VSID_BITS_256M need to be ignored from r10
@@ -298,10 +297,11 @@ _GLOBAL(slb_compare_rr_to_size)
 /*
  * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
  *
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9
+ * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
  */
 slb_finish_load_1T:
-	srdi	r10,r10,40-28		/* get 1T ESID */
+	srdi	r10,r10,(SID_SHIFT_1T - SID_SHIFT)	/* get 1T ESID */
+	rldimi  r10,r9,ESID_BITS_1T,0
 	ASM_VSID_SCRAMBLE(r10,r9,1T)
 	/*
 	 * bits above VSID_BITS_1T need to be ignored from r10

arch/powerpc/mm/tlb_hash64.c

@@ -82,11 +82,11 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	if (!is_kernel_addr(addr)) {
 		ssize = user_segment_size(addr);
 		vsid = get_vsid(mm->context.id, addr, ssize);
-		WARN_ON(vsid == 0);
 	} else {
 		vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
 		ssize = mmu_kernel_ssize;
 	}
+	WARN_ON(vsid == 0);
 	vpn = hpt_vpn(addr, vsid, ssize);
 	rpte = __real_pte(__pte(pte), ptep);
 

arch/powerpc/perf/power7-pmu.c

@@ -420,7 +420,20 @@ static struct attribute_group power7_pmu_events_group = {
 	.attrs = power7_events_attr,
 };
 
+PMU_FORMAT_ATTR(event, "config:0-19");
+
+static struct attribute *power7_pmu_format_attr[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+struct attribute_group power7_pmu_format_group = {
+	.name = "format",
+	.attrs = power7_pmu_format_attr,
+};
+
 static const struct attribute_group *power7_pmu_attr_groups[] = {
+	&power7_pmu_format_group,
 	&power7_pmu_events_group,
 	NULL,
 };

arch/powerpc/platforms/85xx/sgy_cts1000.c

@@ -69,7 +69,7 @@ static irqreturn_t gpio_halt_irq(int irq, void *__data)
         return IRQ_HANDLED;
 };
 
-static int __devinit gpio_halt_probe(struct platform_device *pdev)
+static int gpio_halt_probe(struct platform_device *pdev)
 {
 	enum of_gpio_flags flags;
 	struct device_node *node = pdev->dev.of_node;
@@ -128,7 +128,7 @@ static int __devinit gpio_halt_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit gpio_halt_remove(struct platform_device *pdev)
+static int gpio_halt_remove(struct platform_device *pdev)
 {
 	if (halt_node) {
 		int gpio = of_get_gpio(halt_node, 0);
@@ -165,7 +165,7 @@ static struct platform_driver gpio_halt_driver = {
 		.of_match_table = gpio_halt_match,
 	},
 	.probe		= gpio_halt_probe,
-	.remove		= __devexit_p(gpio_halt_remove),
+	.remove		= gpio_halt_remove,
 };
 
 module_platform_driver(gpio_halt_driver);

arch/powerpc/platforms/Kconfig.cputype

@@ -124,9 +124,8 @@ config 6xx
 	select PPC_HAVE_PMU_SUPPORT
 
 config POWER3
-	bool
 	depends on PPC64 && PPC_BOOK3S
-	default y if !POWER4_ONLY
+	def_bool y
 
 config POWER4
 	depends on PPC64 && PPC_BOOK3S
@@ -145,8 +144,7 @@ config TUNE_CELL
 	  but somewhat slower on other machines. This option only changes
 	  the scheduling of instructions, not the selection of instructions
 	  itself, so the resulting kernel will keep running on all other
-	  machines. When building a kernel that is supposed to run only
-	  on Cell, you should also select the POWER4_ONLY option.
+	  machines.
 
 # this is temp to handle compat with arch=ppc
 config 8xx

arch/s390/include/asm/eadm.h

@@ -34,6 +34,8 @@ struct arsb {
 	u32 reserved[4];
 } __packed;
 
+#define EQC_WR_PROHIBIT 22
+
 struct msb {
 	u8 fmt:4;
 	u8 oc:4;
@@ -96,11 +98,13 @@ struct scm_device {
 #define OP_STATE_TEMP_ERR	2
 #define OP_STATE_PERM_ERR	3
 
+enum scm_event {SCM_CHANGE, SCM_AVAIL};
+
 struct scm_driver {
 	struct device_driver drv;
 	int (*probe) (struct scm_device *scmdev);
 	int (*remove) (struct scm_device *scmdev);
-	void (*notify) (struct scm_device *scmdev);
+	void (*notify) (struct scm_device *scmdev, enum scm_event event);
 	void (*handler) (struct scm_device *scmdev, void *data, int error);
 };
 

arch/s390/include/asm/tlbflush.h

@@ -74,8 +74,6 @@ static inline void __tlb_flush_idte(unsigned long asce)
 
 static inline void __tlb_flush_mm(struct mm_struct * mm)
 {
-	if (unlikely(cpumask_empty(mm_cpumask(mm))))
-		return;
 	/*
 	 * If the machine has IDTE we prefer to do a per mm flush
 	 * on all cpus instead of doing a local flush if the mm

arch/s390/kernel/entry.S

@@ -636,7 +636,8 @@ ENTRY(mcck_int_handler)
 	UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER
 mcck_skip:
 	SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT
-	mvc	__PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA
+	stm	%r0,%r7,__PT_R0(%r11)
+	mvc	__PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32
 	stm	%r8,%r9,__PT_PSW(%r11)
 	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
 	l	%r1,BASED(.Ldo_machine_check)

arch/s390/kernel/entry64.S

@@ -678,8 +678,9 @@ ENTRY(mcck_int_handler)
 	UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER
 	LAST_BREAK %r14
 mcck_skip:
-	lghi	%r14,__LC_GPREGS_SAVE_AREA
-	mvc	__PT_R0(128,%r11),0(%r14)
+	lghi	%r14,__LC_GPREGS_SAVE_AREA+64
+	stmg	%r0,%r7,__PT_R0(%r11)
+	mvc	__PT_R8(64,%r11),0(%r14)
 	stmg	%r8,%r9,__PT_PSW(%r11)
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
 	lgr	%r2,%r11		# pass pointer to pt_regs

arch/s390/kernel/setup.c

@@ -571,6 +571,8 @@ static void __init setup_memory_end(void)
 
 	/* Split remaining virtual space between 1:1 mapping & vmemmap array */
 	tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page));
+	/* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
+	tmp = SECTION_ALIGN_UP(tmp);
 	tmp = VMALLOC_START - tmp * sizeof(struct page);
 	tmp &= ~((vmax >> 11) - 1);	/* align to page table level */
 	tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS);

arch/sparc/Kconfig

@@ -84,12 +84,6 @@ config ARCH_DEFCONFIG
 	default "arch/sparc/configs/sparc32_defconfig" if SPARC32
 	default "arch/sparc/configs/sparc64_defconfig" if SPARC64
 
-# CONFIG_BITS can be used at source level to get 32/64 bits
-config BITS
-	int
-	default 32 if SPARC32
-	default 64 if SPARC64
-
 config IOMMU_HELPER
 	bool
 	default y if SPARC64
@@ -197,7 +191,7 @@ config RWSEM_XCHGADD_ALGORITHM
 
 config GENERIC_HWEIGHT
 	bool
-	default y if !ULTRA_HAS_POPULATION_COUNT
+	default y
 
 config GENERIC_CALIBRATE_DELAY
 	bool

arch/sparc/include/asm/spitfire.h

@@ -45,6 +45,7 @@
 #define SUN4V_CHIP_NIAGARA3	0x03
 #define SUN4V_CHIP_NIAGARA4	0x04
 #define SUN4V_CHIP_NIAGARA5	0x05
+#define SUN4V_CHIP_SPARC64X	0x8a
 #define SUN4V_CHIP_UNKNOWN	0xff
 
 #ifndef __ASSEMBLY__

arch/sparc/kernel/cpu.c

@@ -493,6 +493,12 @@ static void __init sun4v_cpu_probe(void)
 		sparc_pmu_type = "niagara5";
 		break;
 
+	case SUN4V_CHIP_SPARC64X:
+		sparc_cpu_type = "SPARC64-X";
+		sparc_fpu_type = "SPARC64-X integrated FPU";
+		sparc_pmu_type = "sparc64-x";
+		break;
+
 	default:
 		printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n",
 		       prom_cpu_compatible);

arch/sparc/kernel/head_64.S

@@ -134,6 +134,8 @@ prom_niagara_prefix:
 	.asciz	"SUNW,UltraSPARC-T"
 prom_sparc_prefix:
 	.asciz	"SPARC-"
+prom_sparc64x_prefix:
+	.asciz	"SPARC64-X"
 	.align	4
 prom_root_compatible:
 	.skip	64
@@ -412,7 +414,7 @@ sun4v_chip_type:
 	cmp	%g2, 'T'
 	be,pt	%xcc, 70f
 	 cmp	%g2, 'M'
-	bne,pn	%xcc, 4f
+	bne,pn	%xcc, 49f
 	 nop
 
 70:	ldub	[%g1 + 7], %g2
@@ -425,7 +427,7 @@ sun4v_chip_type:
 	cmp	%g2, '5'
 	be,pt	%xcc, 5f
 	 mov	SUN4V_CHIP_NIAGARA5, %g4
-	ba,pt	%xcc, 4f
+	ba,pt	%xcc, 49f
 	 nop
 
 91:	sethi	%hi(prom_cpu_compatible), %g1
@@ -439,6 +441,25 @@ sun4v_chip_type:
 	 mov	SUN4V_CHIP_NIAGARA2, %g4
 	
 4:
+	/* Athena */
+	sethi	%hi(prom_cpu_compatible), %g1
+	or	%g1, %lo(prom_cpu_compatible), %g1
+	sethi	%hi(prom_sparc64x_prefix), %g7
+	or	%g7, %lo(prom_sparc64x_prefix), %g7
+	mov	9, %g3
+41:	ldub	[%g7], %g2
+	ldub	[%g1], %g4
+	cmp	%g2, %g4
+	bne,pn	%icc, 49f
+	add	%g7, 1, %g7
+	subcc	%g3, 1, %g3
+	bne,pt	%xcc, 41b
+	add	%g1, 1, %g1
+	mov	SUN4V_CHIP_SPARC64X, %g4
+	ba,pt	%xcc, 5f
+	nop
+
+49:
 	mov	SUN4V_CHIP_UNKNOWN, %g4
 5:	sethi	%hi(sun4v_chip_type), %g2
 	or	%g2, %lo(sun4v_chip_type), %g2

arch/sparc/kernel/leon_pci_grpci2.c

@@ -186,6 +186,8 @@ struct grpci2_cap_first {
 #define CAP9_IOMAP_OFS 0x20
 #define CAP9_BARSIZE_OFS 0x24
 
+#define TGT 256
+
 struct grpci2_priv {
 	struct leon_pci_info	info; /* must be on top of this structure */
 	struct grpci2_regs	*regs;
@@ -237,8 +239,12 @@ static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus,
 	if (where & 0x3)
 		return -EINVAL;
 
-	if (bus == 0 && PCI_SLOT(devfn) != 0)
-		devfn += (0x8 * 6);
+	if (bus == 0) {
+		devfn += (0x8 * 6); /* start at AD16=Device0 */
+	} else if (bus == TGT) {
+		bus = 0;
+		devfn = 0; /* special case: bridge controller itself */
+	}
 
 	/* Select bus */
 	spin_lock_irqsave(&grpci2_dev_lock, flags);
@@ -303,8 +309,12 @@ static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus,
 	if (where & 0x3)
 		return -EINVAL;
 
-	if (bus == 0 && PCI_SLOT(devfn) != 0)
-		devfn += (0x8 * 6);
+	if (bus == 0) {
+		devfn += (0x8 * 6); /* start at AD16=Device0 */
+	} else if (bus == TGT) {
+		bus = 0;
+		devfn = 0; /* special case: bridge controller itself */
+	}
 
 	/* Select bus */
 	spin_lock_irqsave(&grpci2_dev_lock, flags);
@@ -368,7 +378,7 @@ static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn,
 	unsigned int busno = bus->number;
 	int ret;
 
-	if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
+	if (PCI_SLOT(devfn) > 15 || busno > 255) {
 		*val = ~0;
 		return 0;
 	}
@@ -406,7 +416,7 @@ static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn,
 	struct grpci2_priv *priv = grpci2priv;
 	unsigned int busno = bus->number;
 
-	if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
+	if (PCI_SLOT(devfn) > 15 || busno > 255)
 		return 0;
 
 #ifdef GRPCI2_DEBUG_CFGACCESS
@@ -578,15 +588,15 @@ void grpci2_hw_init(struct grpci2_priv *priv)
 		REGSTORE(regs->ahbmst_map[i], priv->pci_area);
 
 	/* Get the GRPCI2 Host PCI ID */
-	grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
+	grpci2_cfg_r32(priv, TGT, 0, PCI_VENDOR_ID, &priv->pciid);
 
 	/* Get address to first (always defined) capability structure */
-	grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
+	grpci2_cfg_r8(priv, TGT, 0, PCI_CAPABILITY_LIST, &capptr);
 
 	/* Enable/Disable Byte twisting */
-	grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
+	grpci2_cfg_r32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, &io_map);
 	io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
-	grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
+	grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, io_map);
 
 	/* Setup the Host's PCI Target BARs for other peripherals to access,
 	 * and do DMA to the host's memory. The target BARs can be sized and
@@ -617,17 +627,18 @@ void grpci2_hw_init(struct grpci2_priv *priv)
 				pciadr = 0;
 			}
 		}
-		grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
-		grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
-		grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
+		grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BARSIZE_OFS+i*4,
+				bar_sz);
+		grpci2_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
+		grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
 		printk(KERN_INFO "        TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
 			i, pciadr, ahbadr);
 	}
 
 	/* set as bus master and enable pci memory responses */
-	grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
+	grpci2_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data);
 	data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-	grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
+	grpci2_cfg_w32(priv, TGT, 0, PCI_COMMAND, data);
 
 	/* Enable Error respone (CPU-TRAP) on illegal memory access. */
 	REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);

arch/tile/configs/tilegx_defconfig

@@ -330,7 +330,6 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MULTICORE_RAID456=y
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_DEBUG=y

arch/tile/configs/tilepro_defconfig

@@ -324,7 +324,6 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MULTICORE_RAID456=y
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_DEBUG=y

arch/x86/include/asm/kprobes.h

@@ -77,6 +77,7 @@ struct arch_specific_insn {
 	 * a post_handler or break_handler).
 	 */
 	int boostable;
+	bool if_modifier;
 };
 
 struct arch_optimized_insn {

arch/x86/include/asm/kvm_host.h

@@ -414,8 +414,8 @@ struct kvm_vcpu_arch {
 	gpa_t time;
 	struct pvclock_vcpu_time_info hv_clock;
 	unsigned int hw_tsc_khz;
-	unsigned int time_offset;
-	struct page *time_page;
+	struct gfn_to_hva_cache pv_time;
+	bool pv_time_enabled;
 	/* set guest stopped flag in pvclock flags field */
 	bool pvclock_set_guest_stopped_request;
 

arch/x86/include/asm/xen/hypercall.h

@@ -382,14 +382,14 @@ HYPERVISOR_console_io(int cmd, int count, char *str)
 	return _hypercall3(int, console_io, cmd, count, str);
 }
 
-extern int __must_check HYPERVISOR_physdev_op_compat(int, void *);
+extern int __must_check xen_physdev_op_compat(int, void *);
 
 static inline int
 HYPERVISOR_physdev_op(int cmd, void *arg)
 {
 	int rc = _hypercall2(int, physdev_op, cmd, arg);
 	if (unlikely(rc == -ENOSYS))
-		rc = HYPERVISOR_physdev_op_compat(cmd, arg);
+		rc = xen_physdev_op_compat(cmd, arg);
 	return rc;
 }
 

arch/x86/include/uapi/asm/msr-index.h

@@ -44,6 +44,7 @@
 #define SNB_C1_AUTO_UNDEMOTE		(1UL << 27)
 #define SNB_C3_AUTO_UNDEMOTE		(1UL << 28)
 
+#define MSR_PLATFORM_INFO		0x000000ce
 #define MSR_MTRRcap			0x000000fe
 #define MSR_IA32_BBL_CR_CTL		0x00000119
 #define MSR_IA32_BBL_CR_CTL3		0x0000011e

arch/x86/kernel/cpu/perf_event_intel.c

@@ -101,6 +101,10 @@ static struct event_constraint intel_snb_event_constraints[] __read_mostly =
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
 	FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
+	INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf), /* CYCLE_ACTIVITY.CYCLES_NO_DISPATCH */
+	INTEL_UEVENT_CONSTRAINT(0x05a3, 0xf), /* CYCLE_ACTIVITY.STALLS_L2_PENDING */
+	INTEL_UEVENT_CONSTRAINT(0x02a3, 0x4), /* CYCLE_ACTIVITY.CYCLES_L1D_PENDING */
+	INTEL_UEVENT_CONSTRAINT(0x06a3, 0x4), /* CYCLE_ACTIVITY.STALLS_L1D_PENDING */
 	INTEL_EVENT_CONSTRAINT(0x48, 0x4), /* L1D_PEND_MISS.PENDING */
 	INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */
 	INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */

arch/x86/kernel/kprobes/core.c

@@ -375,6 +375,9 @@ static void __kprobes arch_copy_kprobe(struct kprobe *p)
 	else
 		p->ainsn.boostable = -1;
 
+	/* Check whether the instruction modifies Interrupt Flag or not */
+	p->ainsn.if_modifier = is_IF_modifier(p->ainsn.insn);
+
 	/* Also, displacement change doesn't affect the first byte */
 	p->opcode = p->ainsn.insn[0];
 }
@@ -434,7 +437,7 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	__this_cpu_write(current_kprobe, p);
 	kcb->kprobe_saved_flags = kcb->kprobe_old_flags
 		= (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
-	if (is_IF_modifier(p->ainsn.insn))
+	if (p->ainsn.if_modifier)
 		kcb->kprobe_saved_flags &= ~X86_EFLAGS_IF;
 }
 

arch/x86/kernel/microcode_intel_early.c

@@ -90,13 +90,13 @@ microcode_phys(struct microcode_intel **mc_saved_tmp,
 	struct microcode_intel ***mc_saved;
 
 	mc_saved = (struct microcode_intel ***)
-		   __pa_symbol(&mc_saved_data->mc_saved);
+		   __pa_nodebug(&mc_saved_data->mc_saved);
 	for (i = 0; i < mc_saved_data->mc_saved_count; i++) {
 		struct microcode_intel *p;
 
 		p = *(struct microcode_intel **)
-			__pa(mc_saved_data->mc_saved + i);
-		mc_saved_tmp[i] = (struct microcode_intel *)__pa(p);
+			__pa_nodebug(mc_saved_data->mc_saved + i);
+		mc_saved_tmp[i] = (struct microcode_intel *)__pa_nodebug(p);
 	}
 }
 #endif
@@ -562,7 +562,7 @@ scan_microcode(unsigned long start, unsigned long end,
 	struct cpio_data cd;
 	long offset = 0;
 #ifdef CONFIG_X86_32
-	char *p = (char *)__pa_symbol(ucode_name);
+	char *p = (char *)__pa_nodebug(ucode_name);
 #else
 	char *p = ucode_name;
 #endif
@@ -630,8 +630,8 @@ static void __cpuinit print_ucode(struct ucode_cpu_info *uci)
 	if (mc_intel == NULL)
 		return;
 
-	delay_ucode_info_p = (int *)__pa_symbol(&delay_ucode_info);
-	current_mc_date_p = (int *)__pa_symbol(&current_mc_date);
+	delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info);
+	current_mc_date_p = (int *)__pa_nodebug(&current_mc_date);
 
 	*delay_ucode_info_p = 1;
 	*current_mc_date_p = mc_intel->hdr.date;
@@ -659,8 +659,8 @@ static inline void __cpuinit print_ucode(struct ucode_cpu_info *uci)
 }
 #endif
 
-static int apply_microcode_early(struct mc_saved_data *mc_saved_data,
-				 struct ucode_cpu_info *uci)
+static int __cpuinit apply_microcode_early(struct mc_saved_data *mc_saved_data,
+					   struct ucode_cpu_info *uci)
 {
 	struct microcode_intel *mc_intel;
 	unsigned int val[2];
@@ -741,15 +741,15 @@ load_ucode_intel_bsp(void)
 #ifdef CONFIG_X86_32
 	struct boot_params *boot_params_p;
 
-	boot_params_p = (struct boot_params *)__pa_symbol(&boot_params);
+	boot_params_p = (struct boot_params *)__pa_nodebug(&boot_params);
 	ramdisk_image = boot_params_p->hdr.ramdisk_image;
 	ramdisk_size  = boot_params_p->hdr.ramdisk_size;
 	initrd_start_early = ramdisk_image;
 	initrd_end_early = initrd_start_early + ramdisk_size;
 
 	_load_ucode_intel_bsp(
-		(struct mc_saved_data *)__pa_symbol(&mc_saved_data),
-		(unsigned long *)__pa_symbol(&mc_saved_in_initrd),
+		(struct mc_saved_data *)__pa_nodebug(&mc_saved_data),
+		(unsigned long *)__pa_nodebug(&mc_saved_in_initrd),
 		initrd_start_early, initrd_end_early, &uci);
 #else
 	ramdisk_image = boot_params.hdr.ramdisk_image;
@@ -772,10 +772,10 @@ void __cpuinit load_ucode_intel_ap(void)
 	unsigned long *initrd_start_p;
 
 	mc_saved_in_initrd_p =
-		(unsigned long *)__pa_symbol(mc_saved_in_initrd);
-	mc_saved_data_p = (struct mc_saved_data *)__pa_symbol(&mc_saved_data);
-	initrd_start_p = (unsigned long *)__pa_symbol(&initrd_start);
-	initrd_start_addr = (unsigned long)__pa_symbol(*initrd_start_p);
+		(unsigned long *)__pa_nodebug(mc_saved_in_initrd);
+	mc_saved_data_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data);
+	initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
+	initrd_start_addr = (unsigned long)__pa_nodebug(*initrd_start_p);
 #else
 	mc_saved_data_p = &mc_saved_data;
 	mc_saved_in_initrd_p = mc_saved_in_initrd;

arch/x86/kvm/x86.c

@@ -1406,25 +1406,15 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	unsigned long flags, this_tsc_khz;
 	struct kvm_vcpu_arch *vcpu = &v->arch;
 	struct kvm_arch *ka = &v->kvm->arch;
-	void *shared_kaddr;
 	s64 kernel_ns, max_kernel_ns;
 	u64 tsc_timestamp, host_tsc;
-	struct pvclock_vcpu_time_info *guest_hv_clock;
+	struct pvclock_vcpu_time_info guest_hv_clock;
 	u8 pvclock_flags;
 	bool use_master_clock;
 
 	kernel_ns = 0;
 	host_tsc = 0;
 
-	/* Keep irq disabled to prevent changes to the clock */
-	local_irq_save(flags);
-	this_tsc_khz = __get_cpu_var(cpu_tsc_khz);
-	if (unlikely(this_tsc_khz == 0)) {
-		local_irq_restore(flags);
-		kvm_make_request(KVM_REQ_CLOCK_UPDATE, v);
-		return 1;
-	}
-
 	/*
 	 * If the host uses TSC clock, then passthrough TSC as stable
 	 * to the guest.
@@ -1436,6 +1426,15 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 		kernel_ns = ka->master_kernel_ns;
 	}
 	spin_unlock(&ka->pvclock_gtod_sync_lock);
+
+	/* Keep irq disabled to prevent changes to the clock */
+	local_irq_save(flags);
+	this_tsc_khz = __get_cpu_var(cpu_tsc_khz);
+	if (unlikely(this_tsc_khz == 0)) {
+		local_irq_restore(flags);
+		kvm_make_request(KVM_REQ_CLOCK_UPDATE, v);
+		return 1;
+	}
 	if (!use_master_clock) {
 		host_tsc = native_read_tsc();
 		kernel_ns = get_kernel_ns();
@@ -1463,7 +1462,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 
 	local_irq_restore(flags);
 
-	if (!vcpu->time_page)
+	if (!vcpu->pv_time_enabled)
 		return 0;
 
 	/*
@@ -1525,12 +1524,12 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	 */
 	vcpu->hv_clock.version += 2;
 
-	shared_kaddr = kmap_atomic(vcpu->time_page);
-
-	guest_hv_clock = shared_kaddr + vcpu->time_offset;
+	if (unlikely(kvm_read_guest_cached(v->kvm, &vcpu->pv_time,
+		&guest_hv_clock, sizeof(guest_hv_clock))))
+		return 0;
 
 	/* retain PVCLOCK_GUEST_STOPPED if set in guest copy */
-	pvclock_flags = (guest_hv_clock->flags & PVCLOCK_GUEST_STOPPED);
+	pvclock_flags = (guest_hv_clock.flags & PVCLOCK_GUEST_STOPPED);
 
 	if (vcpu->pvclock_set_guest_stopped_request) {
 		pvclock_flags |= PVCLOCK_GUEST_STOPPED;
@@ -1543,12 +1542,9 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 
 	vcpu->hv_clock.flags = pvclock_flags;
 
-	memcpy(shared_kaddr + vcpu->time_offset, &vcpu->hv_clock,
-	       sizeof(vcpu->hv_clock));
-
-	kunmap_atomic(shared_kaddr);
-
-	mark_page_dirty(v->kvm, vcpu->time >> PAGE_SHIFT);
+	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+				&vcpu->hv_clock,
+				sizeof(vcpu->hv_clock));
 	return 0;
 }
 
@@ -1837,10 +1833,7 @@ static int kvm_pv_enable_async_pf(struct kvm_vcpu *vcpu, u64 data)
 
 static void kvmclock_reset(struct kvm_vcpu *vcpu)
 {
-	if (vcpu->arch.time_page) {
-		kvm_release_page_dirty(vcpu->arch.time_page);
-		vcpu->arch.time_page = NULL;
-	}
+	vcpu->arch.pv_time_enabled = false;
 }
 
 static void accumulate_steal_time(struct kvm_vcpu *vcpu)
@@ -1947,6 +1940,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		break;
 	case MSR_KVM_SYSTEM_TIME_NEW:
 	case MSR_KVM_SYSTEM_TIME: {
+		u64 gpa_offset;
 		kvmclock_reset(vcpu);
 
 		vcpu->arch.time = data;
@@ -1956,14 +1950,17 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		if (!(data & 1))
 			break;
 
-		/* ...but clean it before doing the actual write */
-		vcpu->arch.time_offset = data & ~(PAGE_MASK | 1);
+		gpa_offset = data & ~(PAGE_MASK | 1);
 
-		vcpu->arch.time_page =
-				gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT);
+		/* Check that the address is 32-byte aligned. */
+		if (gpa_offset & (sizeof(struct pvclock_vcpu_time_info) - 1))
+			break;
 
-		if (is_error_page(vcpu->arch.time_page))
-			vcpu->arch.time_page = NULL;
+		if (kvm_gfn_to_hva_cache_init(vcpu->kvm,
+		     &vcpu->arch.pv_time, data & ~1ULL))
+			vcpu->arch.pv_time_enabled = false;
+		else
+			vcpu->arch.pv_time_enabled = true;
 
 		break;
 	}
@@ -2967,7 +2964,7 @@ static int kvm_vcpu_ioctl_x86_set_xcrs(struct kvm_vcpu *vcpu,
  */
 static int kvm_set_guest_paused(struct kvm_vcpu *vcpu)
 {
-	if (!vcpu->arch.time_page)
+	if (!vcpu->arch.pv_time_enabled)
 		return -EINVAL;
 	vcpu->arch.pvclock_set_guest_stopped_request = true;
 	kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
@@ -6718,6 +6715,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 		goto fail_free_wbinvd_dirty_mask;
 
 	vcpu->arch.ia32_tsc_adjust_msr = 0x0;
+	vcpu->arch.pv_time_enabled = false;
 	kvm_async_pf_hash_reset(vcpu);
 	kvm_pmu_init(vcpu);
 

arch/x86/lib/usercopy_64.c

@@ -74,10 +74,10 @@ copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest)
 	char c;
 	unsigned zero_len;
 
-	for (; len; --len) {
+	for (; len; --len, to++) {
 		if (__get_user_nocheck(c, from++, sizeof(char)))
 			break;
-		if (__put_user_nocheck(c, to++, sizeof(char)))
+		if (__put_user_nocheck(c, to, sizeof(char)))
 			break;
 	}
 

arch/x86/xen/mmu.c

@@ -1467,8 +1467,6 @@ static void __init xen_write_cr3_init(unsigned long cr3)
 	__xen_write_cr3(true, cr3);
 
 	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
-
-	pv_mmu_ops.write_cr3 = &xen_write_cr3;
 }
 #endif
 
@@ -2122,6 +2120,7 @@ static void __init xen_post_allocator_init(void)
 #endif
 
 #ifdef CONFIG_X86_64
+	pv_mmu_ops.write_cr3 = &xen_write_cr3;
 	SetPagePinned(virt_to_page(level3_user_vsyscall));
 #endif
 	xen_mark_init_mm_pinned();