Merge branch 'rtc-sa1100' of git://github.com/hzhuang1/linux into next/drivers

* 'rtc-sa1100' of git://github.com/hzhuang1/linux:
  ARM: mmp: enable rtc in pxa910
  rtc: sa1100: enable clk support
  ARM: pxa: add rtc dummy clock
  ARM: sa1100: clean up clock support
  rtc: sa1100: declare irq in resource
  rtc: sa1100: remove verification code of alarm
  rtc: sa1100: remove periodic code

arch/arm/Kconfig

@@ -754,7 +754,7 @@ config ARCH_SA1100
 	select ARCH_HAS_CPUFREQ
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB

arch/arm/mach-mmp/include/mach/pxa910.h

@@ -22,6 +22,7 @@ extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
 
 extern struct platform_device pxa910_device_gpio;
+extern struct platform_device pxa910_device_rtc;
 
 static inline int pxa910_add_uart(int id)
 {

arch/arm/mach-mmp/include/mach/regs-apbc.h

@@ -57,6 +57,7 @@
 #define APBC_PXA910_SSP1	APBC_REG(0x01c)
 #define APBC_PXA910_SSP2	APBC_REG(0x020)
 #define APBC_PXA910_IPC		APBC_REG(0x024)
+#define APBC_PXA910_RTC		APBC_REG(0x028)
 #define APBC_PXA910_TWSI0	APBC_REG(0x02c)
 #define APBC_PXA910_KPC		APBC_REG(0x030)
 #define APBC_PXA910_TIMERS	APBC_REG(0x034)

arch/arm/mach-mmp/include/mach/regs-rtc.h

@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/addr-map.h>
+
+#define RTC_VIRT_BASE	(APB_VIRT_BASE + 0x10000)
+#define RTC_REG(x)	(*((volatile u32 __iomem *)(RTC_VIRT_BASE + (x))))
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		RTC_REG(0x00)	/* RTC Count Register */
+#define RTAR		RTC_REG(0x04)	/* RTC Alarm Register */
+#define RTSR		RTC_REG(0x08)	/* RTC Status Register */
+#define RTTR		RTC_REG(0x0C)	/* RTC Timer Trim Register */
+
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */

arch/arm/mach-mmp/pxa910.c

@@ -92,6 +92,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
+static APBC_CLK(rtc, PXA910_RTC, 8, 32768);
 
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(u2o, USB, 0x1b, 480000000);
@@ -109,6 +110,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
+	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -183,3 +185,28 @@ struct platform_device pxa910_device_gpio = {
 	.num_resources	= ARRAY_SIZE(pxa910_resource_gpio),
 	.resource	= pxa910_resource_gpio,
 };
+
+static struct resource pxa910_resource_rtc[] = {
+	{
+		.start	= 0xd4010000,
+		.end	= 0xd401003f,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PXA910_RTC_INT,
+		.end	= IRQ_PXA910_RTC_INT,
+		.name	= "rtc 1Hz",
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_PXA910_RTC_ALARM,
+		.end	= IRQ_PXA910_RTC_ALARM,
+		.name	= "rtc alarm",
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa910_device_rtc = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa910_resource_rtc),
+	.resource	= pxa910_resource_rtc,
+};

arch/arm/mach-mmp/ttc_dkb.c

@@ -124,6 +124,7 @@ static struct platform_device ttc_dkb_device_onenand = {
 
 static struct platform_device *ttc_dkb_devices[] = {
 	&pxa910_device_gpio,
+	&pxa910_device_rtc,
 	&ttc_dkb_device_onenand,
 };
 

arch/arm/mach-pxa/devices.c

@@ -406,20 +406,17 @@ static struct resource pxa_rtc_resources[] = {
 	[1] = {
 		.start  = IRQ_RTC1Hz,
 		.end    = IRQ_RTC1Hz,
+		.name	= "rtc 1Hz",
 		.flags  = IORESOURCE_IRQ,
 	},
 	[2] = {
 		.start  = IRQ_RTCAlrm,
 		.end    = IRQ_RTCAlrm,
+		.name	= "rtc alarm",
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-struct platform_device sa1100_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-};
-
 struct platform_device pxa_device_rtc = {
 	.name		= "pxa-rtc",
 	.id		= -1,
@@ -427,6 +424,27 @@ struct platform_device pxa_device_rtc = {
 	.resource       = pxa_rtc_resources,
 };
 
+static struct resource sa1100_rtc_resources[] = {
+	{
+		.start  = IRQ_RTC1Hz,
+		.end    = IRQ_RTC1Hz,
+		.name	= "rtc 1Hz",
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.start  = IRQ_RTCAlrm,
+		.end    = IRQ_RTCAlrm,
+		.name	= "rtc alarm",
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device sa1100_device_rtc = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
+	.resource	= sa1100_rtc_resources,
+};
+
 static struct resource pxa_ac97_resources[] = {
 	[0] = {
 		.start  = 0x40500000,

arch/arm/mach-pxa/pxa25x.c

@@ -209,6 +209,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =

arch/arm/mach-pxa/pxa27x.c

@@ -230,6 +230,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 #ifdef CONFIG_PM

arch/arm/mach-pxa/pxa3xx.c

@@ -89,6 +89,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
 	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 #ifdef CONFIG_PM

arch/arm/mach-pxa/pxa95x.c

@@ -231,6 +231,7 @@ static struct clk_lookup pxa95x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
 	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
 	INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 void __init pxa95x_init_irq(void)

arch/arm/mach-sa1100/clock.c

@@ -11,17 +11,29 @@
 #include <linux/clk.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 
-/*
- * Very simple clock implementation - we only have one clock to deal with.
- */
+struct clkops {
+	void			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+};
+
 struct clk {
+	const struct clkops	*ops;
 	unsigned int		enabled;
 };
 
-static void clk_gpio27_enable(void)
+#define DEFINE_CLK(_name, _ops)				\
+struct clk clk_##_name = {				\
+		.ops	= _ops,				\
+	}
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static void clk_gpio27_enable(struct clk *clk)
 {
 	/*
 	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
@@ -32,38 +44,24 @@ static void clk_gpio27_enable(void)
 	TUCR = TUCR_3_6864MHz;
 }
 
-static void clk_gpio27_disable(void)
+static void clk_gpio27_disable(struct clk *clk)
 {
 	TUCR = 0;
 	GPDR &= ~GPIO_32_768kHz;
 	GAFR &= ~GPIO_32_768kHz;
 }
 
-static struct clk clk_gpio27;
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	const char *devname = dev_name(dev);
-
-	return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (clk->enabled++ == 0)
-		clk_gpio27_enable();
-	spin_unlock_irqrestore(&clocks_lock, flags);
+	if (clk) {
+		spin_lock_irqsave(&clocks_lock, flags);
+		if (clk->enabled++ == 0)
+			clk->ops->enable(clk);
+		spin_unlock_irqrestore(&clocks_lock, flags);
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
@@ -72,17 +70,31 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
-	WARN_ON(clk->enabled == 0);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->enabled == 0)
-		clk_gpio27_disable();
-	spin_unlock_irqrestore(&clocks_lock, flags);
+	if (clk) {
+		WARN_ON(clk->enabled == 0);
+		spin_lock_irqsave(&clocks_lock, flags);
+		if (--clk->enabled == 0)
+			clk->ops->disable(clk);
+		spin_unlock_irqrestore(&clocks_lock, flags);
+	}
 }
 EXPORT_SYMBOL(clk_disable);
 
-unsigned long clk_get_rate(struct clk *clk)
+const struct clkops clk_gpio27_ops = {
+	.enable		= clk_gpio27_enable,
+	.disable	= clk_gpio27_disable,
+};
+
+static DEFINE_CLK(gpio27, &clk_gpio27_ops);
+
+static struct clk_lookup sa11xx_clkregs[] = {
+	CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27),
+	CLKDEV_INIT("sa1100-rtc", NULL, NULL),
+};
+
+static int __init sa11xx_clk_init(void)
 {
-	return 3686400;
+	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
+	return 0;
 }
-EXPORT_SYMBOL(clk_get_rate);
+core_initcall(sa11xx_clk_init);

arch/arm/mach-sa1100/generic.c

@@ -345,9 +345,17 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 	sa11x0_register_device(&sa11x0ir_device, irda);
 }
 
+static struct resource sa1100_rtc_resources[] = {
+	DEFINE_RES_MEM(0x90010000, 0x9001003f),
+	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
+	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
+};
+
 static struct platform_device sa11x0rtc_device = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
+	.resource	= sa1100_rtc_resources,
 };
 
 static struct platform_device *sa11x0_devices[] __initdata = {

drivers/rtc/Kconfig

@@ -773,8 +773,8 @@ config RTC_DRV_EP93XX
 	  will be called rtc-ep93xx.
 
 config RTC_DRV_SA1100
-	tristate "SA11x0/PXA2xx"
-	depends on ARCH_SA1100 || ARCH_PXA
+	tristate "SA11x0/PXA2xx/PXA910"
+	depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
 	help
 	  If you say Y here you will get access to the real time clock
 	  built into your SA11x0 or PXA2xx CPU.

drivers/rtc/rtc-sa1100.c

@@ -23,10 +23,12 @@
 
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/clk.h>
 #include <linux/rtc.h>
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/pm.h>
 #include <linux/bitops.h>
@@ -34,83 +36,30 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
 #include <mach/regs-rtc.h>
 #endif
 
 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
-
-static const unsigned long RTC_FREQ = 1024;
-static struct rtc_time rtc_alarm;
-static DEFINE_SPINLOCK(sa1100_rtc_lock);
-
-static inline int rtc_periodic_alarm(struct rtc_time *tm)
-{
-	return  (tm->tm_year == -1) ||
-		((unsigned)tm->tm_mon >= 12) ||
-		((unsigned)(tm->tm_mday - 1) >= 31) ||
-		((unsigned)tm->tm_hour > 23) ||
-		((unsigned)tm->tm_min > 59) ||
-		((unsigned)tm->tm_sec > 59);
-}
-
-/*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
- */
-static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
-	struct rtc_time *alrm)
-{
-	unsigned long next_time;
-	unsigned long now_time;
-
-	next->tm_year = now->tm_year;
-	next->tm_mon = now->tm_mon;
-	next->tm_mday = now->tm_mday;
-	next->tm_hour = alrm->tm_hour;
-	next->tm_min = alrm->tm_min;
-	next->tm_sec = alrm->tm_sec;
-
-	rtc_tm_to_time(now, &now_time);
-	rtc_tm_to_time(next, &next_time);
-
-	if (next_time < now_time) {
-		/* Advance one day */
-		next_time += 60 * 60 * 24;
-		rtc_time_to_tm(next_time, next);
-	}
-}
-
-static int rtc_update_alarm(struct rtc_time *alrm)
-{
-	struct rtc_time alarm_tm, now_tm;
-	unsigned long now, time;
-	int ret;
-
-	do {
-		now = RCNR;
-		rtc_time_to_tm(now, &now_tm);
-		rtc_next_alarm_time(&alarm_tm, &now_tm, alrm);
-		ret = rtc_tm_to_time(&alarm_tm, &time);
-		if (ret != 0)
-			break;
-
-		RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
-		RTAR = time;
-	} while (now != RCNR);
-
-	return ret;
-}
+#define RTC_FREQ		1024
+
+struct sa1100_rtc {
+	spinlock_t		lock;
+	int			irq_1hz;
+	int			irq_alarm;
+	struct rtc_device	*rtc;
+	struct clk		*clk;
+};
 
 static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 {
-	struct platform_device *pdev = to_platform_device(dev_id);
-	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	struct sa1100_rtc *info = dev_get_drvdata(dev_id);
+	struct rtc_device *rtc = info->rtc;
 	unsigned int rtsr;
 	unsigned long events = 0;
 
-	spin_lock(&sa1100_rtc_lock);
+	spin_lock(&info->lock);
 
 	rtsr = RTSR;
 	/* clear interrupt sources */
@@ -146,30 +95,30 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 
 	rtc_update_irq(rtc, 1, events);
 
-	if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm))
-		rtc_update_alarm(&rtc_alarm);
-
-	spin_unlock(&sa1100_rtc_lock);
+	spin_unlock(&info->lock);
 
 	return IRQ_HANDLED;
 }
 
 static int sa1100_rtc_open(struct device *dev)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	struct rtc_device *rtc = info->rtc;
 	int ret;
-	struct platform_device *plat_dev = to_platform_device(dev);
-	struct rtc_device *rtc = platform_get_drvdata(plat_dev);
 
-	ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
+	ret = clk_prepare_enable(info->clk);
+	if (ret)
+		goto fail_clk;
+	ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, IRQF_DISABLED,
 		"rtc 1Hz", dev);
 	if (ret) {
-		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
+		dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
 		goto fail_ui;
 	}
-	ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
+	ret = request_irq(info->irq_alarm, sa1100_rtc_interrupt, IRQF_DISABLED,
 		"rtc Alrm", dev);
 	if (ret) {
-		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
+		dev_err(dev, "IRQ %d already in use.\n", info->irq_alarm);
 		goto fail_ai;
 	}
 	rtc->max_user_freq = RTC_FREQ;
@@ -178,29 +127,36 @@ static int sa1100_rtc_open(struct device *dev)
 	return 0;
 
  fail_ai:
-	free_irq(IRQ_RTC1Hz, dev);
+	free_irq(info->irq_1hz, dev);
  fail_ui:
+	clk_disable_unprepare(info->clk);
+ fail_clk:
 	return ret;
 }
 
 static void sa1100_rtc_release(struct device *dev)
 {
-	spin_lock_irq(&sa1100_rtc_lock);
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+	spin_lock_irq(&info->lock);
 	RTSR = 0;
-	spin_unlock_irq(&sa1100_rtc_lock);
+	spin_unlock_irq(&info->lock);
 
-	free_irq(IRQ_RTCAlrm, dev);
-	free_irq(IRQ_RTC1Hz, dev);
+	free_irq(info->irq_alarm, dev);
+	free_irq(info->irq_1hz, dev);
+	clk_disable_unprepare(info->clk);
 }
 
 static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
-	spin_lock_irq(&sa1100_rtc_lock);
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+	spin_lock_irq(&info->lock);
 	if (enabled)
 		RTSR |= RTSR_ALE;
 	else
 		RTSR &= ~RTSR_ALE;
-	spin_unlock_irq(&sa1100_rtc_lock);
+	spin_unlock_irq(&info->lock);
 	return 0;
 }
 
@@ -225,7 +181,6 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	u32	rtsr;
 
-	memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time));
 	rtsr = RTSR;
 	alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
 	alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
@@ -234,17 +189,22 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
+	unsigned long time;
 	int ret;
 
-	spin_lock_irq(&sa1100_rtc_lock);
-	ret = rtc_update_alarm(&alrm->time);
-	if (ret == 0) {
-		if (alrm->enabled)
-			RTSR |= RTSR_ALE;
-		else
-			RTSR &= ~RTSR_ALE;
-	}
-	spin_unlock_irq(&sa1100_rtc_lock);
+	spin_lock_irq(&info->lock);
+	ret = rtc_tm_to_time(&alrm->time, &time);
+	if (ret != 0)
+		goto out;
+	RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
+	RTAR = time;
+	if (alrm->enabled)
+		RTSR |= RTSR_ALE;
+	else
+		RTSR &= ~RTSR_ALE;
+out:
+	spin_unlock_irq(&info->lock);
 
 	return ret;
 }
@@ -271,6 +231,27 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
 static int sa1100_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
+	struct sa1100_rtc *info;
+	int irq_1hz, irq_alarm, ret = 0;
+
+	irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
+	irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
+	if (irq_1hz < 0 || irq_alarm < 0)
+		return -ENODEV;
+
+	info = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	info->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(info->clk)) {
+		dev_err(&pdev->dev, "failed to find rtc clock source\n");
+		ret = PTR_ERR(info->clk);
+		goto err_clk;
+	}
+	info->irq_1hz = irq_1hz;
+	info->irq_alarm = irq_alarm;
+	spin_lock_init(&info->lock);
+	platform_set_drvdata(pdev, info);
 
 	/*
 	 * According to the manual we should be able to let RTTR be zero
@@ -292,10 +273,11 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
 		THIS_MODULE);
 
-	if (IS_ERR(rtc))
-		return PTR_ERR(rtc);
-
-	platform_set_drvdata(pdev, rtc);
+	if (IS_ERR(rtc)) {
+		ret = PTR_ERR(rtc);
+		goto err_dev;
+	}
+	info->rtc = rtc;
 
 	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
 	 * See also the comments in sa1100_rtc_interrupt().
@@ -322,14 +304,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	RTSR = RTSR_AL | RTSR_HZ;
 
 	return 0;
+err_dev:
+	platform_set_drvdata(pdev, NULL);
+	clk_put(info->clk);
+err_clk:
+	kfree(info);
+	return ret;
 }
 
 static int sa1100_rtc_remove(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	struct sa1100_rtc *info = platform_get_drvdata(pdev);
 
-	if (rtc)
-		rtc_device_unregister(rtc);
+	if (info) {
+		rtc_device_unregister(info->rtc);
+		clk_put(info->clk);
+		platform_set_drvdata(pdev, NULL);
+		kfree(info);
+	}
 
 	return 0;
 }
@@ -337,15 +329,17 @@ static int sa1100_rtc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int sa1100_rtc_suspend(struct device *dev)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
 	if (device_may_wakeup(dev))
-		enable_irq_wake(IRQ_RTCAlrm);
+		enable_irq_wake(info->irq_alarm);
 	return 0;
 }
 
 static int sa1100_rtc_resume(struct device *dev)
 {
+	struct sa1100_rtc *info = dev_get_drvdata(dev);
 	if (device_may_wakeup(dev))
-		disable_irq_wake(IRQ_RTCAlrm);
+		disable_irq_wake(info->irq_alarm);
 	return 0;
 }