Merge branch 'armsoc/pxa' of git://github.com/hzhuang1/linux into next/boards

A series dealing with gpio configuration cleanup from Haojian Zhuang.

* 'armsoc/pxa' of git://github.com/hzhuang1/linux:
  ARM: pxa: move debug uart code
  ARM: pxa: select PXA935 on saar & tavorevb
  ARM: mmp: add more compatible names in gpio driver
  ARM: pxa: move PXA_GPIO_TO_IRQ macro
  ARM: pxa: remove cpu_is_xxx in gpio driver

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/gpio/mrvl-gpio.txt

@@ -1,7 +1,10 @@
 * Marvell PXA GPIO controller
 
 Required properties:
-- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
+- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
+		"intel,pxa27x-gpio", "intel,pxa3xx-gpio",
+		"marvell,pxa93x-gpio", "marvell,mmp-gpio" or
+		"marvell,mmp2-gpio".
 - reg : Address and length of the register set for the device
 - interrupts : Should be the port interrupt shared by all gpio pins.
   There're three gpio interrupts in arch-pxa, and they're gpio0,
@@ -18,7 +21,7 @@ Required properties:
 Example:
 
 	gpio: gpio@d4019000 {
-		compatible = "mrvl,mmp-gpio";
+		compatible = "marvell,mmp-gpio";
 		reg = <0xd4019000 0x1000>;
 		interrupts = <49>;
 		interrupt-name = "gpio_mux";

arch/arm/Kconfig.debug

@@ -312,6 +312,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on PicoXcell based platforms.
 
+	config DEBUG_PXA_UART1
+		depends on ARCH_PXA
+		bool "Use PXA UART1 for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on PXA UART1.
+
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
 		depends on ARCH_REALVIEW
@@ -593,6 +600,8 @@ config DEBUG_LL_INCLUDE
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
+	default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \
+				 DEBUG_MMP_UART3
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
 	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \

arch/arm/boot/dts/mmp2.dtsi

@@ -160,7 +160,7 @@
 			};
 
 			gpio@d4019000 {
-				compatible = "mrvl,mmp-gpio";
+				compatible = "marvell,mmp2-gpio";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xd4019000 0x1000>;

arch/arm/boot/dts/pxa168.dtsi

@@ -77,7 +77,7 @@
 			};
 
 			gpio@d4019000 {
-				compatible = "mrvl,mmp-gpio";
+				compatible = "marvell,mmp-gpio";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xd4019000 0x1000>;

arch/arm/boot/dts/pxa910.dtsi

@@ -89,7 +89,7 @@
 			};
 
 			gpio@d4019000 {
-				compatible = "mrvl,mmp-gpio";
+				compatible = "marvell,mmp-gpio";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xd4019000 0x1000>;

arch/arm/include/debug/pxa.S

@@ -0,0 +1,33 @@
+/*
+ * Early serial output macro for Marvell PXA/MMP SoC
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * Copyright (C) 2013 Haojian Zhuang
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#if defined(CONFIG_DEBUG_PXA_UART1)
+#define PXA_UART_REG_PHYS_BASE	0x40100000
+#define PXA_UART_REG_VIRT_BASE	0xf2100000
+#elif defined(CONFIG_DEBUG_MMP_UART2)
+#define PXA_UART_REG_PHYS_BASE	0xd4017000
+#define PXA_UART_REG_VIRT_BASE	0xfe017000
+#elif defined(CONFIG_DEBUG_MMP_UART3)
+#define PXA_UART_REG_PHYS_BASE	0xd4018000
+#define PXA_UART_REG_VIRT_BASE	0xfe018000
+#else
+#error "Select uart for DEBUG_LL"
+#endif
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =PXA_UART_REG_PHYS_BASE
+	ldr	\rv, =PXA_UART_REG_VIRT_BASE
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>

arch/arm/mach-mmp/aspenite.c

@@ -9,6 +9,7 @@
  *  publishhed by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
@@ -110,6 +111,10 @@ static unsigned long common_pin_config[] __initdata = {
 	GPIO121_KP_MKIN4,
 };
 
+static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
 static struct smc91x_platdata smc91x_info = {
 	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
 };
@@ -248,6 +253,8 @@ static void __init common_init(void)
 	pxa168_add_nand(&aspenite_nand_info);
 	pxa168_add_fb(&aspenite_lcd_info);
 	pxa168_add_keypad(&aspenite_keypad_info);
+	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
 	platform_device_register(&pxa168_device_gpio);
 
 	/* off-chip devices */

arch/arm/mach-mmp/avengers_lite.c

@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/gpio-pxa.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
@@ -32,12 +33,18 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
 	GPIO89_UART2_RXD,
 };
 
+static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
 static void __init avengers_lite_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
 
 	/* on-chip devices */
 	pxa168_add_uart(2);
+	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
 	platform_device_register(&pxa168_device_gpio);
 }
 

arch/arm/mach-mmp/brownstone.c

@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio-pxa.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8649.h>
 #include <linux/regulator/fixed.h>
@@ -104,6 +105,10 @@ static unsigned long brownstone_pin_config[] __initdata = {
 	GPIO89_GPIO,
 };
 
+static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
 static struct regulator_consumer_supply max8649_supply[] = {
 	REGULATOR_SUPPLY("vcc_core", NULL),
 };
@@ -202,6 +207,8 @@ static void __init brownstone_init(void)
 	/* on-chip devices */
 	mmp2_add_uart(1);
 	mmp2_add_uart(3);
+	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
 	platform_device_register(&mmp2_device_gpio);
 	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
 	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */

arch/arm/mach-mmp/clock-mmp2.c

@@ -98,7 +98,7 @@ static struct clk_lookup mmp2_clkregs[] = {
 	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
 	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_gpio, "mmp2-gpio", NULL),
 	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
 	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
 	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),

arch/arm/mach-mmp/clock-pxa168.c

@@ -78,7 +78,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL),
 	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
 	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),

arch/arm/mach-mmp/clock-pxa910.c

@@ -56,7 +56,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL),
 	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };

arch/arm/mach-mmp/flint.c

@@ -16,6 +16,7 @@
 #include <linux/smc91x.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
@@ -77,6 +78,10 @@ static unsigned long flint_pin_config[] __initdata = {
 	GPIO160_ND_RDY1,
 };
 
+static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
 static struct smc91x_platdata flint_smc91x_info = {
 	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 };
@@ -111,6 +116,8 @@ static void __init flint_init(void)
 	/* on-chip devices */
 	mmp2_add_uart(1);
 	mmp2_add_uart(2);
+	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
 	platform_device_register(&mmp2_device_gpio);
 
 	/* off-chip devices */

arch/arm/mach-mmp/gplugd.c

@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -128,6 +129,10 @@ static unsigned long gplugd_pin_config[] __initdata = {
 	GPIO116_I2S_TXD
 };
 
+static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
 static struct i2c_board_info gplugd_i2c_board_info[] = {
 	{
 		.type = "isl1208",
@@ -186,6 +191,8 @@ static void __init gplugd_init(void)
 	pxa168_add_uart(3);
 	pxa168_add_ssp(1);
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
+	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
 	platform_device_register(&pxa168_device_gpio);
 
 	pxa168_add_eth(&gplugd_eth_platform_data);

arch/arm/mach-mmp/include/mach/debug-macro.S

@@ -1,30 +0,0 @@
-/* arch/arm/mach-mmp/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copied from arch/arm/mach-pxa/include/mach/debug.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#if defined(CONFIG_DEBUG_MMP_UART2)
-#define MMP_UART_OFFSET	0x00017000
-#elif defined(CONFIG_DEBUG_MMP_UART3)
-#define MMP_UART_OFFSET	0x00018000
-#else
-#error "Select uart for DEBUG_LL"
-#endif
-
-#include <mach/addr-map.h>
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =APB_PHYS_BASE		@ physical
-		ldr	\rv, =APB_VIRT_BASE		@ virtual
-		orr	\rp, \rp, #MMP_UART_OFFSET
-		orr	\rv, \rv, #MMP_UART_OFFSET
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>

arch/arm/mach-mmp/jasper.c

@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/gpio-pxa.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/regulator/machine.h>
@@ -99,6 +100,10 @@ static unsigned long jasper_pin_config[] __initdata = {
 	GPIO151_MMC3_CLK,
 };
 
+static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
 static struct regulator_consumer_supply max8649_supply[] = {
 	REGULATOR_SUPPLY("vcc_core", NULL),
 };
@@ -165,6 +170,9 @@ static void __init jasper_init(void)
 	mmp2_add_uart(1);
 	mmp2_add_uart(3);
 	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
+	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
+	platform_device_register(&mmp2_device_gpio);
 	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
 
 	regulator_has_full_constraints();

arch/arm/mach-mmp/mmp-dt.c

@@ -28,7 +28,7 @@ static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
-	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
 	{}
 };
@@ -39,7 +39,7 @@ static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
-	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
 	{}
 };

arch/arm/mach-mmp/mmp2-dt.c

@@ -31,7 +31,7 @@ static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
-	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
 	{}
 };

arch/arm/mach-mmp/mmp2.c

@@ -164,7 +164,7 @@ struct resource mmp2_resource_gpio[] = {
 };
 
 struct platform_device mmp2_device_gpio = {
-	.name		= "pxa-gpio",
+	.name		= "mmp2-gpio",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(mmp2_resource_gpio),
 	.resource	= mmp2_resource_gpio,

arch/arm/mach-mmp/pxa168.c

@@ -125,7 +125,7 @@ struct resource pxa168_resource_gpio[] = {
 };
 
 struct platform_device pxa168_device_gpio = {
-	.name		= "pxa-gpio",
+	.name		= "mmp-gpio",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa168_resource_gpio),
 	.resource	= pxa168_resource_gpio,

arch/arm/mach-mmp/pxa910.c

@@ -152,7 +152,7 @@ struct resource pxa910_resource_gpio[] = {
 };
 
 struct platform_device pxa910_device_gpio = {
-	.name		= "pxa-gpio",
+	.name		= "mmp-gpio",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa910_resource_gpio),
 	.resource	= pxa910_resource_gpio,

arch/arm/mach-mmp/tavorevb.c

@@ -8,6 +8,7 @@
  *  publishhed by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
@@ -60,6 +61,10 @@ static unsigned long tavorevb_pin_config[] __initdata = {
 	DF_RDY0_DF_RDY0,
 };
 
+static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
 static struct smc91x_platdata tavorevb_smc91x_info = {
 	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
 };
@@ -93,6 +98,8 @@ static void __init tavorevb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
+	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
 	platform_device_register(&pxa910_device_gpio);
 
 	/* off-chip devices */

arch/arm/mach-mmp/teton_bga.c

@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/input.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/i2c.h>
@@ -49,6 +50,10 @@ static unsigned long teton_bga_pin_config[] __initdata = {
 	GPIO78_GPIO,
 };
 
+static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
 static unsigned int teton_bga_matrix_key_map[] = {
 	KEY(0, 6, KEY_ESC),
 	KEY(0, 7, KEY_ENTER),
@@ -79,6 +84,8 @@ static void __init teton_bga_init(void)
 	pxa168_add_uart(1);
 	pxa168_add_keypad(&teton_bga_keypad_info);
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
+	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
 	platform_device_register(&pxa168_device_gpio);
 }
 

arch/arm/mach-mmp/ttc_dkb.c

@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/mfd/88pm860x.h>
 #include <linux/platform_data/mv_usb.h>
 #include <linux/spi/spi.h>
@@ -75,6 +76,10 @@ static unsigned long ttc_dkb_pin_config[] __initdata = {
 	DF_RDY0_DF_RDY0,
 };
 
+static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
+	.irq_base	= MMP_GPIO_TO_IRQ(0),
+};
+
 static struct mtd_partition ttc_dkb_onenand_partitions[] = {
 	{
 		.name		= "bootloader",
@@ -284,6 +289,8 @@ static void __init ttc_dkb_init(void)
 
 	/* off-chip devices */
 	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
+	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
+				 sizeof(struct pxa_gpio_platform_data));
 	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 
 #ifdef CONFIG_USB_MV_UDC

arch/arm/mach-pxa/Kconfig

@@ -51,11 +51,13 @@ config MACH_LITTLETON
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
 	select CPU_PXA930
+	select CPU_PXA935
 	select PXA3xx
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select CPU_PXA930
+	select CPU_PXA935
 	select PXA3xx
 
 comment "Third Party Dev Platforms (sorted by vendor name)"

arch/arm/mach-pxa/devices.c

@@ -1107,8 +1107,33 @@ struct resource pxa_resource_gpio[] = {
 	},
 };
 
-struct platform_device pxa_device_gpio = {
-	.name		= "pxa-gpio",
+struct platform_device pxa25x_device_gpio = {
+#ifdef CONFIG_CPU_PXA26x
+	.name		= "pxa26x-gpio",
+#else
+	.name		= "pxa25x-gpio",
+#endif
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
+	.resource	= pxa_resource_gpio,
+};
+
+struct platform_device pxa27x_device_gpio = {
+	.name		= "pxa27x-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
+	.resource	= pxa_resource_gpio,
+};
+
+struct platform_device pxa3xx_device_gpio = {
+	.name		= "pxa3xx-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
+	.resource	= pxa_resource_gpio,
+};
+
+struct platform_device pxa93x_device_gpio = {
+	.name		= "pxa93x-gpio",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
 	.resource	= pxa_resource_gpio,

arch/arm/mach-pxa/devices.h

@@ -16,7 +16,6 @@ extern struct platform_device pxa_device_ficp;
 extern struct platform_device sa1100_device_rtc;
 extern struct platform_device pxa_device_rtc;
 extern struct platform_device pxa_device_ac97;
-extern struct platform_device pxa_device_gpio;
 
 extern struct platform_device pxa27x_device_i2c_power;
 extern struct platform_device pxa27x_device_ohci;
@@ -46,4 +45,9 @@ extern struct platform_device pxa_device_asoc_ssp2;
 extern struct platform_device pxa_device_asoc_ssp3;
 extern struct platform_device pxa_device_asoc_ssp4;
 
+extern struct platform_device pxa25x_device_gpio;
+extern struct platform_device pxa27x_device_gpio;
+extern struct platform_device pxa3xx_device_gpio;
+extern struct platform_device pxa93x_device_gpio;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);

arch/arm/mach-pxa/include/mach/debug-macro.S

@@ -1,23 +0,0 @@
-/* arch/arm/mach-pxa/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00100000
-		orr	\rv, \rp, #io_p2v(0x40000000)	@ virtual
-		orr	\rp, \rp, #0x40000000		@ physical
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>

arch/arm/mach-pxa/pxa25x.c

@@ -208,7 +208,11 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
+#ifdef CONFIG_CPU_PXA26x
+	INIT_CLKREG(&clk_dummy, "pxa26x-gpio", NULL),
+#else
+	INIT_CLKREG(&clk_dummy, "pxa25x-gpio", NULL),
+#endif
 	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
@@ -340,7 +344,8 @@ void __init pxa25x_map_io(void)
 }
 
 static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {
-	.gpio_set_wake = gpio_set_wake,
+	.irq_base	= PXA_GPIO_TO_IRQ(0),
+	.gpio_set_wake	= gpio_set_wake,
 };
 
 static struct platform_device *pxa25x_devices[] __initdata = {
@@ -375,7 +380,7 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
-		pxa_register_device(&pxa_device_gpio, &pxa25x_gpio_info);
+		pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 		ret = platform_add_devices(pxa25x_devices,
 					   ARRAY_SIZE(pxa25x_devices));
 		if (ret)

arch/arm/mach-pxa/pxa27x.c

@@ -237,7 +237,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa27x-gpio", NULL),
 	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
@@ -431,7 +431,8 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 }
 
 static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
-	.gpio_set_wake = gpio_set_wake,
+	.irq_base	= PXA_GPIO_TO_IRQ(0),
+	.gpio_set_wake	= gpio_set_wake,
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -470,7 +471,7 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
-		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
+		pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 

arch/arm/mach-pxa/pxa3xx.c

@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/gpio-pxa.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
@@ -92,7 +93,8 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa3xx-gpio", NULL),
+	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa93x-gpio", NULL),
 	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
@@ -435,8 +437,11 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa3xx_device_i2c_power, info);
 }
 
+static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = {
+	.irq_base	= PXA_GPIO_TO_IRQ(0),
+};
+
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -482,8 +487,18 @@ static int __init pxa3xx_init(void)
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
-		if (!of_have_populated_dt())
-			ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+		if (of_have_populated_dt())
+			return 0;
+
+		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+		if (ret)
+			return ret;
+		if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) {
+			platform_device_add_data(&pxa3xx_device_gpio,
+						 &pxa3xx_gpio_pdata,
+						 sizeof(pxa3xx_gpio_pdata));
+			ret = platform_device_register(&pxa3xx_device_gpio);
+		}
 	}
 
 	return ret;

arch/arm/mach-pxa/pxa930.c

@@ -12,12 +12,15 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio-pxa.h>
+#include <linux/platform_device.h>
 
 #include <mach/pxa930.h>
 
+#include "devices.h"
+
 static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR(GPIO0, 0x02e0),
@@ -190,11 +193,21 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct pxa_gpio_platform_data pxa93x_gpio_pdata = {
+	.irq_base	= PXA_GPIO_TO_IRQ(0),
+};
+
 static int __init pxa930_init(void)
 {
+	int ret = 0;
+
 	if (cpu_is_pxa93x()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
+		platform_device_add_data(&pxa93x_device_gpio,
+					 &pxa93x_gpio_pdata,
+					 sizeof(pxa93x_gpio_pdata));
+		ret = platform_device_register(&pxa93x_device_gpio);
 	}
 
 	if (cpu_is_pxa935())

drivers/clk/mmp/clk-mmp2.c

@@ -221,7 +221,7 @@ void __init mmp2_clk_init(void)
 
 	clk = mmp_clk_register_apbc("gpio", "vctcxo",
 				apbc_base + APBC_GPIO, 10, 0, &clk_lock);
-	clk_register_clkdev(clk, NULL, "pxa-gpio");
+	clk_register_clkdev(clk, NULL, "mmp2-gpio");
 
 	clk = mmp_clk_register_apbc("kpc", "clk32",
 				apbc_base + APBC_KPC, 10, 0, &clk_lock);

drivers/clk/mmp/clk-pxa168.c

@@ -172,7 +172,7 @@ void __init pxa168_clk_init(void)
 
 	clk = mmp_clk_register_apbc("gpio", "vctcxo",
 				apbc_base + APBC_GPIO, 10, 0, &clk_lock);
-	clk_register_clkdev(clk, NULL, "pxa-gpio");
+	clk_register_clkdev(clk, NULL, "mmp-gpio");
 
 	clk = mmp_clk_register_apbc("kpc", "clk32",
 				apbc_base + APBC_KPC, 10, 0, &clk_lock);

drivers/clk/mmp/clk-pxa910.c

@@ -177,7 +177,7 @@ void __init pxa910_clk_init(void)
 
 	clk = mmp_clk_register_apbc("gpio", "vctcxo",
 				apbc_base + APBC_GPIO, 10, 0, &clk_lock);
-	clk_register_clkdev(clk, NULL, "pxa-gpio");
+	clk_register_clkdev(clk, NULL, "mmp-gpio");
 
 	clk = mmp_clk_register_apbc("kpc", "clk32",
 				apbc_base + APBC_KPC, 10, 0, &clk_lock);

drivers/gpio/gpio-pxa.c

@@ -86,20 +86,61 @@ struct pxa_gpio_chip {
 #endif
 };
 
-enum {
+enum pxa_gpio_type {
 	PXA25X_GPIO = 0,
 	PXA26X_GPIO,
 	PXA27X_GPIO,
 	PXA3XX_GPIO,
 	PXA93X_GPIO,
 	MMP_GPIO = 0x10,
+	MMP2_GPIO,
+};
+
+struct pxa_gpio_id {
+	enum pxa_gpio_type	type;
+	int			gpio_nums;
 };
 
 static DEFINE_SPINLOCK(gpio_lock);
 static struct pxa_gpio_chip *pxa_gpio_chips;
-static int gpio_type;
+static enum pxa_gpio_type gpio_type;
 static void __iomem *gpio_reg_base;
 
+static struct pxa_gpio_id pxa25x_id = {
+	.type		= PXA25X_GPIO,
+	.gpio_nums	= 85,
+};
+
+static struct pxa_gpio_id pxa26x_id = {
+	.type		= PXA26X_GPIO,
+	.gpio_nums	= 90,
+};
+
+static struct pxa_gpio_id pxa27x_id = {
+	.type		= PXA27X_GPIO,
+	.gpio_nums	= 121,
+};
+
+static struct pxa_gpio_id pxa3xx_id = {
+	.type		= PXA3XX_GPIO,
+	.gpio_nums	= 128,
+};
+
+static struct pxa_gpio_id pxa93x_id = {
+	.type		= PXA93X_GPIO,
+	.gpio_nums	= 192,
+};
+
+static struct pxa_gpio_id mmp_id = {
+	.type		= MMP_GPIO,
+	.gpio_nums	= 128,
+};
+
+static struct pxa_gpio_id mmp2_id = {
+	.type		= MMP2_GPIO,
+	.gpio_nums	= 192,
+};
+
 #define for_each_gpio_chip(i, c)			\
 	for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
 
@@ -432,47 +473,39 @@ static struct irq_chip pxa_muxed_gpio_chip = {
 	.irq_set_wake	= pxa_gpio_set_wake,
 };
 
-static int pxa_gpio_nums(void)
+static int pxa_gpio_nums(struct platform_device *pdev)
 {
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pxa_gpio_id *pxa_id = (struct pxa_gpio_id *)id->driver_data;
 	int count = 0;
 
-#ifdef CONFIG_ARCH_PXA
-	if (cpu_is_pxa25x()) {
-#ifdef CONFIG_CPU_PXA26x
-		count = 89;
-		gpio_type = PXA26X_GPIO;
-#elif defined(CONFIG_PXA25x)
-		count = 84;
-		gpio_type = PXA26X_GPIO;
-#endif /* CONFIG_CPU_PXA26x */
-	} else if (cpu_is_pxa27x()) {
-		count = 120;
-		gpio_type = PXA27X_GPIO;
-	} else if (cpu_is_pxa93x()) {
-		count = 191;
-		gpio_type = PXA93X_GPIO;
-	} else if (cpu_is_pxa3xx()) {
-		count = 127;
-		gpio_type = PXA3XX_GPIO;
-	}
-#endif /* CONFIG_ARCH_PXA */
-
-#ifdef CONFIG_ARCH_MMP
-	if (cpu_is_pxa168() || cpu_is_pxa910()) {
-		count = 127;
-		gpio_type = MMP_GPIO;
-	} else if (cpu_is_mmp2()) {
-		count = 191;
-		gpio_type = MMP_GPIO;
+	switch (pxa_id->type) {
+	case PXA25X_GPIO:
+	case PXA26X_GPIO:
+	case PXA27X_GPIO:
+	case PXA3XX_GPIO:
+	case PXA93X_GPIO:
+	case MMP_GPIO:
+	case MMP2_GPIO:
+		gpio_type = pxa_id->type;
+		count = pxa_id->gpio_nums - 1;
+		break;
+	default:
+		count = -EINVAL;
+		break;
 	}
-#endif /* CONFIG_ARCH_MMP */
 	return count;
 }
 
 #ifdef CONFIG_OF
 static struct of_device_id pxa_gpio_dt_ids[] = {
-	{ .compatible = "mrvl,pxa-gpio" },
-	{ .compatible = "mrvl,mmp-gpio", .data = (void *)MMP_GPIO },
+	{ .compatible = "intel,pxa25x-gpio",	.data = &pxa25x_id, },
+	{ .compatible = "intel,pxa26x-gpio",	.data = &pxa26x_id, },
+	{ .compatible = "intel,pxa27x-gpio",	.data = &pxa27x_id, },
+	{ .compatible = "intel,pxa3xx-gpio",	.data = &pxa3xx_id, },
+	{ .compatible = "marvell,pxa93x-gpio",	.data = &pxa93x_id, },
+	{ .compatible = "marvell,mmp-gpio",	.data = &mmp_id, },
+	{ .compatible = "marvell,mmp2-gpio",	.data = &mmp2_id, },
 	{}
 };
 
@@ -492,16 +525,18 @@ const struct irq_domain_ops pxa_irq_domain_ops = {
 
 static int pxa_gpio_probe_dt(struct platform_device *pdev)
 {
-	int ret, nr_banks, nr_gpios;
+	int ret, nr_gpios;
 	struct device_node *prev, *next, *np = pdev->dev.of_node;
 	const struct of_device_id *of_id =
 				of_match_device(pxa_gpio_dt_ids, &pdev->dev);
+	const struct pxa_gpio_id *gpio_id;
 
-	if (!of_id) {
+	if (!of_id || !of_id->data) {
 		dev_err(&pdev->dev, "Failed to find gpio controller\n");
 		return -EFAULT;
 	}
-	gpio_type = (int)of_id->data;
+	gpio_id = of_id->data;
+	gpio_type = gpio_id->type;
 
 	next = of_get_next_child(np, NULL);
 	prev = next;
@@ -510,14 +545,8 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev)
 		ret = -EINVAL;
 		goto err;
 	}
-	for (nr_banks = 1; ; nr_banks++) {
-		next = of_get_next_child(np, prev);
-		if (!next)
-			break;
-		prev = next;
-	}
 	of_node_put(prev);
-	nr_gpios = nr_banks << 5;
+	nr_gpios = gpio_id->gpio_nums;
 	pxa_last_gpio = nr_gpios - 1;
 
 	irq_base = irq_alloc_descs(-1, 0, nr_gpios, 0);
@@ -546,19 +575,18 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 	int gpio, irq, ret, use_of = 0;
 	int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
 
-	ret = pxa_gpio_probe_dt(pdev);
-	if (ret < 0) {
-		pxa_last_gpio = pxa_gpio_nums();
-#ifdef CONFIG_ARCH_PXA
-		if (gpio_is_pxa_type(gpio_type))
-			irq_base = PXA_GPIO_TO_IRQ(0);
-#endif
-#ifdef CONFIG_ARCH_MMP
-		if (gpio_is_mmp_type(gpio_type))
-			irq_base = MMP_GPIO_TO_IRQ(0);
-#endif
+	info = dev_get_platdata(&pdev->dev);
+	if (info) {
+		irq_base = info->irq_base;
+		if (irq_base <= 0)
+			return -EINVAL;
+		pxa_last_gpio = pxa_gpio_nums(pdev);
 	} else {
+		irq_base = 0;
 		use_of = 1;
+		ret = pxa_gpio_probe_dt(pdev);
+		if (ret < 0)
+			return -EINVAL;
 	}
 
 	if (!pxa_last_gpio)
@@ -595,7 +623,6 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 	}
 
 	/* Initialize GPIO chips */
-	info = dev_get_platdata(&pdev->dev);
 	pxa_init_gpio_chip(pxa_last_gpio, info ? info->gpio_set_wake : NULL);
 
 	/* clear all GPIO edge detects */
@@ -635,12 +662,24 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct platform_device_id gpio_id_table[] = {
+	{ "pxa25x-gpio",	(unsigned long)&pxa25x_id },
+	{ "pxa26x-gpio",	(unsigned long)&pxa26x_id },
+	{ "pxa27x-gpio",	(unsigned long)&pxa27x_id },
+	{ "pxa3xx-gpio",	(unsigned long)&pxa3xx_id },
+	{ "pxa93x-gpio",	(unsigned long)&pxa93x_id },
+	{ "mmp-gpio",		(unsigned long)&mmp_id },
+	{ "mmp2-gpio",		(unsigned long)&mmp2_id },
+	{ },
+};
+
 static struct platform_driver pxa_gpio_driver = {
 	.probe		= pxa_gpio_probe,
 	.driver		= {
 		.name	= "pxa-gpio",
 		.of_match_table = of_match_ptr(pxa_gpio_dt_ids),
 	},
+	.id_table	= gpio_id_table,
 };
 module_platform_driver(pxa_gpio_driver);
 

include/linux/gpio-pxa.h

@@ -14,6 +14,7 @@ extern int pxa_last_gpio;
 extern int pxa_irq_to_gpio(int irq);
 
 struct pxa_gpio_platform_data {
+	int irq_base;
 	int (*gpio_set_wake)(unsigned int gpio, unsigned int on);
 };