MIPS: Whitespace cleanup.

Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Makefile

@@ -191,7 +191,7 @@ endif
 include $(srctree)/arch/mips/Kbuild.platforms
 
 ifdef CONFIG_PHYSICAL_START
-load-y                                  = $(CONFIG_PHYSICAL_START)
+load-y					= $(CONFIG_PHYSICAL_START)
 endif
 
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic

arch/mips/alchemy/Platform

@@ -1,7 +1,7 @@
 #
 # Core Alchemy code
 #
-platform-$(CONFIG_MIPS_ALCHEMY)	+= alchemy/common/
+platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/
 
 
 #
@@ -45,7 +45,7 @@ load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
 #
 # MyCable eval board
 #
-platform-$(CONFIG_MIPS_XXS1500)	+= alchemy/
+platform-$(CONFIG_MIPS_XXS1500) += alchemy/
 load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 
 #
@@ -56,7 +56,7 @@ load-$(CONFIG_MIPS_GPR)		+= 0xffffffff80100000
 
 # boards can specify their own <gpio.h> in one of their include dirs.
 # If they do, placing this line here at the end will make sure the
-# compiler picks the board one.  If they don't, it will make sure
+# compiler picks the board one.	 If they don't, it will make sure
 # the alchemy generic gpio header is picked up.
 
 cflags-$(CONFIG_MIPS_ALCHEMY)	+= -I$(srctree)/arch/mips/include/asm/mach-au1x00

arch/mips/alchemy/board-gpr.c

@@ -135,33 +135,33 @@ static struct mtd_partition gpr_mtd_partitions[] = {
 	{
 		.name	= "kernel",
 		.size	= 0x00200000,
-		.offset	= 0,
+		.offset = 0,
 	},
 	{
 		.name	= "rootfs",
 		.size	= 0x00800000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.mask_flags = MTD_WRITEABLE,
 	},
 	{
 		.name	= "config",
 		.size	= 0x00200000,
-		.offset	= 0x01d00000,
+		.offset = 0x01d00000,
 	},
 	{
 		.name	= "yamon",
 		.size	= 0x00100000,
-		.offset	= 0x01c00000,
+		.offset = 0x01c00000,
 	},
 	{
 		.name	= "yamon env vars",
 		.size	= 0x00040000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 	},
 	{
 		.name	= "kernel+rootfs",
 		.size	= 0x00a00000,
-		.offset	= 0,
+		.offset = 0,
 	},
 };
 

arch/mips/alchemy/board-mtx1.c

@@ -173,23 +173,23 @@ static struct mtd_partition mtx1_mtd_partitions[] = {
 	{
 		.name	= "filesystem",
 		.size	= 0x01C00000,
-		.offset	= 0,
+		.offset = 0,
 	},
 	{
 		.name	= "yamon",
 		.size	= 0x00100000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.mask_flags = MTD_WRITEABLE,
 	},
 	{
 		.name	= "kernel",
 		.size	= 0x002c0000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 	},
 	{
 		.name	= "yamon env",
 		.size	= 0x00040000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 	},
 };
 

arch/mips/alchemy/common/dbdma.c

@@ -252,7 +252,7 @@ EXPORT_SYMBOL(au1xxx_ddma_del_device);
 u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
        void (*callback)(int, void *), void *callparam)
 {
-	unsigned long   flags;
+	unsigned long	flags;
 	u32		used, chan;
 	u32		dcp;
 	int		i;
@@ -512,7 +512,7 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 		break;
 	}
 
-	/* If source input is FIFO, set static address.	*/
+	/* If source input is FIFO, set static address. */
 	if (stp->dev_flags & DEV_FLAGS_IN) {
 		if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
 			src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
@@ -635,7 +635,7 @@ u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
@@ -697,7 +697,7 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
@@ -742,7 +742,7 @@ u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
 	*nbytes = dp->dscr_cmd1;
 	rv = dp->dscr_stat;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
@@ -891,7 +891,7 @@ void au1xxx_dbdma_dump(u32 chanid)
 	chan_tab_t	 *ctp;
 	au1x_ddma_desc_t *dp;
 	dbdev_tab_t	 *stp, *dtp;
-	au1x_dma_chan_t  *cp;
+	au1x_dma_chan_t	 *cp;
 	u32 i		 = 0;
 
 	ctp = *((chan_tab_t **)chanid);
@@ -969,7 +969,7 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
 	ctp->chan_ptr->ddma_dbell = 0;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */

arch/mips/alchemy/common/gpiolib.c

@@ -106,14 +106,14 @@ struct gpio_chip alchemy_gpio_chip[] = {
 		.ngpio			= ALCHEMY_GPIO1_NUM,
 	},
 	[1] = {
-		.label                  = "alchemy-gpio2",
-		.direction_input        = gpio2_direction_input,
-		.direction_output       = gpio2_direction_output,
-		.get                    = gpio2_get,
-		.set                    = gpio2_set,
+		.label			= "alchemy-gpio2",
+		.direction_input	= gpio2_direction_input,
+		.direction_output	= gpio2_direction_output,
+		.get			= gpio2_get,
+		.set			= gpio2_set,
 		.to_irq			= gpio2_to_irq,
-		.base                   = ALCHEMY_GPIO2_BASE,
-		.ngpio                  = ALCHEMY_GPIO2_NUM,
+		.base			= ALCHEMY_GPIO2_BASE,
+		.ngpio			= ALCHEMY_GPIO2_NUM,
 	},
 };
 

arch/mips/alchemy/common/irq.c

@@ -84,20 +84,20 @@ static int au1300_gpic_settype(struct irq_data *d, unsigned int type);
  * needs the highest priority.
  */
 struct alchemy_irqmap au1000_irqmap[] __initdata = {
-	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -106,33 +106,33 @@ struct alchemy_irqmap au1000_irqmap[] __initdata = {
 	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
-	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
 	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
 	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
 struct alchemy_irqmap au1500_irqmap[] __initdata = {
-	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -141,31 +141,31 @@ struct alchemy_irqmap au1500_irqmap[] __initdata = {
 	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
-	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
 	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
 	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
 struct alchemy_irqmap au1100_irqmap[] __initdata = {
-	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -174,33 +174,33 @@ struct alchemy_irqmap au1100_irqmap[] __initdata = {
 	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
-	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
 	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
 	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
 struct alchemy_irqmap au1550_irqmap[] __initdata = {
-	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -210,26 +210,26 @@ struct alchemy_irqmap au1550_irqmap[] __initdata = {
 	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
 	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
 	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ -1, },
 };
 
 struct alchemy_irqmap au1200_irqmap[] __initdata = {
-	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -239,9 +239,9 @@ struct alchemy_irqmap au1200_irqmap[] __initdata = {
 	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
 	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ -1, },
 };
 

arch/mips/alchemy/common/platform.c

@@ -53,7 +53,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 		.irq		= _irq,				\
 		.regshift	= 2,				\
 		.iotype		= UPIO_AU,			\
-		.flags		= UPF_SKIP_TEST | UPF_IOREMAP |	\
+		.flags		= UPF_SKIP_TEST | UPF_IOREMAP | \
 				  UPF_FIXED_TYPE,		\
 		.type		= PORT_16550A,			\
 		.pm		= alchemy_8250_pm,		\
@@ -137,7 +137,7 @@ static void alchemy_ehci_power_off(struct platform_device *pdev)
 }
 
 static struct usb_ehci_pdata alchemy_ehci_pdata = {
-	.no_io_watchdog	= 1,
+	.no_io_watchdog = 1,
 	.power_on	= alchemy_ehci_power_on,
 	.power_off	= alchemy_ehci_power_off,
 	.power_suspend	= alchemy_ehci_power_off,

arch/mips/alchemy/common/setup.c

@@ -59,7 +59,7 @@ void __init plat_mem_setup(void)
 		/* Clear to obtain best system bus performance */
 		clear_c0_config(1 << 19); /* Clear Config[OD] */
 
-	board_setup();  /* board specific setup */
+	board_setup();	/* board specific setup */
 
 	/* IO/MEM resources. */
 	set_io_port_base(0);

arch/mips/alchemy/common/sleeper.S

@@ -102,12 +102,12 @@ LEAF(alchemy_sleep_au1000)
 	cache	0x14, 96(t0)
 	.set	mips0
 
-1:	lui 	a0, 0xb400		/* mem_xxx */
-	sw	zero, 0x001c(a0) 	/* Precharge */
+1:	lui	a0, 0xb400		/* mem_xxx */
+	sw	zero, 0x001c(a0)	/* Precharge */
 	sync
 	sw	zero, 0x0020(a0)	/* Auto Refresh */
 	sync
-	sw	zero, 0x0030(a0)  	/* Sleep */
+	sw	zero, 0x0030(a0)	/* Sleep */
 	sync
 
 	DO_SLEEP
@@ -128,15 +128,15 @@ LEAF(alchemy_sleep_au1550)
 	cache	0x14, 96(t0)
 	.set	mips0
 
-1:	lui 	a0, 0xb400		/* mem_xxx */
-	sw	zero, 0x08c0(a0) 	/* Precharge */
+1:	lui	a0, 0xb400		/* mem_xxx */
+	sw	zero, 0x08c0(a0)	/* Precharge */
 	sync
 	sw	zero, 0x08d0(a0)	/* Self Refresh */
 	sync
 
 	/* wait for sdram to enter self-refresh mode */
-	lui 	t0, 0x0100
-2:	lw 	t1, 0x0850(a0)		/* mem_sdstat */
+	lui	t0, 0x0100
+2:	lw	t1, 0x0850(a0)		/* mem_sdstat */
 	and	t2, t1, t0
 	beq	t2, zero, 2b
 	 nop
@@ -144,9 +144,9 @@ LEAF(alchemy_sleep_au1550)
 	/* disable SDRAM clocks */
 	lui	t0, 0xcfff
 	ori	t0, t0, 0xffff
-	lw 	t1, 0x0840(a0)		/* mem_sdconfiga */
-	and 	t1, t0, t1		/* clear CE[1:0] */
-	sw 	t1, 0x0840(a0)		/* mem_sdconfiga */
+	lw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and	t1, t0, t1		/* clear CE[1:0] */
+	sw	t1, 0x0840(a0)		/* mem_sdconfiga */
 	sync
 
 	DO_SLEEP

arch/mips/alchemy/common/time.c

@@ -85,7 +85,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 	.name		= "rtcmatch2",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.rating		= 1500,
-	.set_next_event	= au1x_rtcmatch2_set_next_event,
+	.set_next_event = au1x_rtcmatch2_set_next_event,
 	.set_mode	= au1x_rtcmatch2_set_mode,
 	.cpumask	= cpu_all_mask,
 };

arch/mips/alchemy/common/usb.c

@@ -122,7 +122,7 @@ static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
 	unsigned long r;
 
 	if (enable) {
-		__raw_writel(1, base + USB_DWC_CTRL7);  /* start OHCI clock */
+		__raw_writel(1, base + USB_DWC_CTRL7);	/* start OHCI clock */
 		wmb();
 
 		r = __raw_readl(base + USB_DWC_CTRL3);	/* enable OHCI block */

arch/mips/alchemy/devboards/bcsr.c

@@ -20,7 +20,7 @@ static struct bcsr_reg {
 	spinlock_t lock;
 } bcsr_regs[BCSR_CNT];
 
-static void __iomem *bcsr_virt;	/* KSEG1 addr of BCSR base */
+static void __iomem *bcsr_virt; /* KSEG1 addr of BCSR base */
 static int bcsr_csc_base;	/* linux-irq of first cascaded irq */
 
 void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys)

arch/mips/alchemy/devboards/db1000.c

@@ -276,7 +276,7 @@ static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b)
 }
 
 static struct led_classdev db1100_mmc_led = {
-	.brightness_set	= db1100_mmcled_set,
+	.brightness_set = db1100_mmcled_set,
 };
 
 static int db1100_mmc1_card_readonly(void *mmc_host)
@@ -314,7 +314,7 @@ static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b)
 }
 
 static struct led_classdev db1100_mmc1_led = {
-	.brightness_set	= db1100_mmc1led_set,
+	.brightness_set = db1100_mmc1led_set,
 };
 
 static struct au1xmmc_platform_data db1100_mmc_platdata[2] = {
@@ -357,7 +357,7 @@ static struct resource au1100_mmc0_resources[] = {
 	}
 };
 
-static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+static u64 au1xxx_mmc_dmamask =	 DMA_BIT_MASK(32);
 
 static struct platform_device db1100_mmc0_dev = {
 	.name		= "au1xxx-mmc",
@@ -482,7 +482,7 @@ static struct spi_board_info db1100_spi_info[] __initdata = {
 		.mode		 = 0,
 		.irq		 = AU1100_GPIO21_INT,
 		.platform_data	 = &db1100_touch_pd,
-		.controller_data = (void *)210,	/* for spi_gpio: CS# GPIO210 */
+		.controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */
 	},
 };
 
@@ -572,7 +572,7 @@ static int __init db1000_dev_init(void)
 		irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_LOW);
 		irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
 		/* EPSON S1D13806 0x1b000000
-		 * SRAM 1MB/2MB   0x1a000000
+		 * SRAM 1MB/2MB	  0x1a000000
 		 * DS1693 RTC	  0x0c000000
 		 */
 	} else if (board == BCSR_WHOAMI_PB1100) {
@@ -586,7 +586,7 @@ static int __init db1000_dev_init(void)
 		irq_set_irq_type(AU1100_GPIO12_INT, IRQ_TYPE_LEVEL_LOW);
 		irq_set_irq_type(AU1100_GPIO13_INT, IRQ_TYPE_LEVEL_LOW);
 		/* EPSON S1D13806 0x1b000000
-		 * SRAM 1MB/2MB   0x1a000000
+		 * SRAM 1MB/2MB	  0x1a000000
 		 * DiskOnChip	  0x0d000000
 		 * DS1693 RTC	  0x0c000000
 		 */
@@ -605,7 +605,7 @@ static int __init db1000_dev_init(void)
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		c0, d0,	/*s0*/0, 0, 0);
+		c0, d0, /*s0*/0, 0, 0);
 
 	if (twosocks) {
 		irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
@@ -619,7 +619,7 @@ static int __init db1000_dev_init(void)
 			AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 			AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 			AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-			c1, d1,	/*s1*/0, 0, 1);
+			c1, d1, /*s1*/0, 0, 1);
 	}
 
 	platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs));

arch/mips/alchemy/devboards/db1200.c

@@ -90,14 +90,14 @@ int __init db1200_board_setup(void)
 
 	whoami = bcsr_read(BCSR_WHOAMI);
 	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
-		"  Board-ID %d  Daughtercard ID %d\n", get_system_type(),
+		"  Board-ID %d	Daughtercard ID %d\n", get_system_type(),
 		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
 
 	/* SMBus/SPI on PSC0, Audio on PSC1 */
 	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
 	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
 	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
-	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
+	pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
 	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
 	wmb();
 
@@ -129,7 +129,7 @@ int __init db1200_board_setup(void)
 static struct mtd_partition db1200_spiflash_parts[] = {
 	{
 		.name	= "spi_flash",
-		.offset	= 0,
+		.offset = 0,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -200,12 +200,12 @@ static int au1200_nand_device_ready(struct mtd_info *mtd)
 static struct mtd_partition db1200_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
-		.offset	= 0,
+		.offset = 0,
 		.size	= 8 * 1024 * 1024,
 	},
 	{
 		.name	= "NAND FS 1",
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.size	= MTDPART_SIZ_FULL
 	},
 };
@@ -395,7 +395,7 @@ static void db1200_mmcled_set(struct led_classdev *led,
 }
 
 static struct led_classdev db1200_mmc_led = {
-	.brightness_set	= db1200_mmcled_set,
+	.brightness_set = db1200_mmcled_set,
 };
 
 /* -- */
@@ -463,7 +463,7 @@ static void pb1200_mmc1led_set(struct led_classdev *led,
 }
 
 static struct led_classdev pb1200_mmc1_led = {
-	.brightness_set	= pb1200_mmc1led_set,
+	.brightness_set = pb1200_mmc1led_set,
 };
 
 static void pb1200_mmc1_set_power(void *mmc_host, int state)
@@ -526,7 +526,7 @@ static struct resource au1200_mmc0_resources[] = {
 	}
 };
 
-static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+static u64 au1xxx_mmc_dmamask =	 DMA_BIT_MASK(32);
 
 static struct platform_device db1200_mmc0_dev = {
 	.name		= "au1xxx-mmc",
@@ -601,7 +601,7 @@ static int db1200fb_panel_shutdown(void)
 static struct au1200fb_platdata db1200fb_pd = {
 	.panel_index	= db1200fb_panel_index,
 	.panel_init	= db1200fb_panel_init,
-	.panel_shutdown	= db1200fb_panel_shutdown,
+	.panel_shutdown = db1200fb_panel_shutdown,
 };
 
 static struct resource au1200_lcd_res[] = {
@@ -772,11 +772,11 @@ static int __init pb1200_res_fixup(void)
 	}
 
 	db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
-	db1200_nand_res[0].end   = PB1200_NAND_PHYS_ADDR + 0xff;
+	db1200_nand_res[0].end	 = PB1200_NAND_PHYS_ADDR + 0xff;
 	db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
-	db1200_ide_res[0].end   = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
+	db1200_ide_res[0].end	= PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
 	db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
-	db1200_eth_res[0].end   = PB1200_ETH_PHYS_ADDR + 0xff;
+	db1200_eth_res[0].end	= PB1200_ETH_PHYS_ADDR + 0xff;
 	return 0;
 }
 
@@ -797,7 +797,7 @@ int __init db1200_dev_setup(void)
 	irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
 	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
 
-	/* insert/eject pairs: one of both is always screaming.  To avoid
+	/* insert/eject pairs: one of both is always screaming.	 To avoid
 	 * issues they must not be automatically enabled when initially
 	 * requested.
 	 */
@@ -813,7 +813,7 @@ int __init db1200_dev_setup(void)
 	spi_register_board_info(db1200_spi_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
 
-	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
+	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C	 ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
 	 *		or S12 on the PB1200.
 	 */

arch/mips/alchemy/devboards/db1300.c

@@ -80,7 +80,7 @@ static int db1300_dev_pins[] __initdata = {
 	AU1300_PIN_PSC0D1,
 	AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
 	AU1300_PIN_PSC1D1,
-	AU1300_PIN_PSC2SYNC0,                       AU1300_PIN_PSC2D0,
+	AU1300_PIN_PSC2SYNC0,			    AU1300_PIN_PSC2D0,
 	AU1300_PIN_PSC2D1,
 	AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
 	AU1300_PIN_PSC3D1,
@@ -143,12 +143,12 @@ static int au1300_nand_device_ready(struct mtd_info *mtd)
 static struct mtd_partition db1300_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
-		.offset	= 0,
+		.offset = 0,
 		.size	= 8 * 1024 * 1024,
 	},
 	{
 		.name	= "NAND FS 1",
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.size	= MTDPART_SIZ_FULL
 	},
 };
@@ -487,7 +487,7 @@ static void db1300_mmcled_set(struct led_classdev *led,
 }
 
 static struct led_classdev db1300_mmc_led = {
-	.brightness_set	= db1300_mmcled_set,
+	.brightness_set = db1300_mmcled_set,
 };
 
 struct au1xmmc_platform_data db1300_sd1_platdata = {
@@ -646,7 +646,7 @@ static int db1300fb_panel_shutdown(void)
 static struct au1200fb_platdata db1300fb_pd = {
 	.panel_index	= db1300fb_panel_index,
 	.panel_init	= db1300fb_panel_init,
-	.panel_shutdown	= db1300fb_panel_shutdown,
+	.panel_shutdown = db1300fb_panel_shutdown,
 };
 
 static struct resource au1300_lcd_res[] = {

arch/mips/alchemy/devboards/db1550.c

@@ -67,7 +67,7 @@ int __init db1550_board_setup(void)
 		bcsr_init(PB1550_BCSR_PHYS_ADDR,
 			  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
 
-	pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d  "	\
+	pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d	"	\
 		"Daughtercard ID %d\n", get_system_type(),
 		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
 
@@ -80,7 +80,7 @@ int __init db1550_board_setup(void)
 static struct mtd_partition db1550_spiflash_parts[] = {
 	{
 		.name	= "spi_flash",
-		.offset	= 0,
+		.offset = 0,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -151,12 +151,12 @@ static int au1550_nand_device_ready(struct mtd_info *mtd)
 static struct mtd_partition db1550_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
-		.offset	= 0,
+		.offset = 0,
 		.size	= 8 * 1024 * 1024,
 	},
 	{
 		.name	= "NAND FS 1",
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.size	= MTDPART_SIZ_FULL
 	},
 };
@@ -495,10 +495,10 @@ static void __init db1550_devices(void)
 {
 	alchemy_gpio_direction_output(203, 0);	/* red led on */
 
-	irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH);  /* CD0# */
-	irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH);  /* CD1# */
-	irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);  /* CARD0# */
-	irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);  /* CARD1# */
+	irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH);	 /* CD0# */
+	irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH);	 /* CD1# */
+	irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);	 /* CARD0# */
+	irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);	 /* CARD1# */
 	irq_set_irq_type(AU1550_GPIO21_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG0# */
 	irq_set_irq_type(AU1550_GPIO22_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG1# */
 
@@ -539,7 +539,7 @@ static void __init pb1550_devices(void)
 
 	/* Pb1550, like all others, also has statuschange irqs; however they're
 	* wired up on one of the Au1550's shared GPIO201_205 line, which also
-	* services the PCMCIA card interrupts.  So we ignore statuschange and
+	* services the PCMCIA card interrupts.	So we ignore statuschange and
 	* use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
 	* drivers are used to shared irqs and b) statuschange isn't really use-
 	* ful anyway.

arch/mips/alchemy/devboards/pm.c

@@ -194,7 +194,7 @@ static ssize_t db1x_pmattr_store(struct kobject *kobj,
 }
 
 #define ATTR(x)							\
-	static struct kobj_attribute x##_attribute = 		\
+	static struct kobj_attribute x##_attribute =		\
 		__ATTR(x, 0664, db1x_pmattr_show,		\
 				db1x_pmattr_store);
 

arch/mips/ar7/Platform

@@ -1,6 +1,6 @@
 #
 # Texas Instruments AR7
 #
-platform-$(CONFIG_AR7)          += ar7/
-cflags-$(CONFIG_AR7)            += -I$(srctree)/arch/mips/include/asm/mach-ar7
-load-$(CONFIG_AR7)              += 0xffffffff94100000
+platform-$(CONFIG_AR7)		+= ar7/
+cflags-$(CONFIG_AR7)		+= -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7)		+= 0xffffffff94100000

arch/mips/ar7/platform.c

@@ -492,11 +492,11 @@ static struct gpio_led gt701_leds[] = {
 		.active_low		= 1,
 		.default_trigger	= "default-on",
 	},
-        {
-                .name                   = "ethernet",
-                .gpio                   = 10,
-                .active_low             = 1,
-        },
+	{
+		.name			= "ethernet",
+		.gpio			= 10,
+		.active_low		= 1,
+	},
 };
 
 static struct gpio_led_platform_data ar7_led_data;
@@ -512,7 +512,7 @@ static void __init detect_leds(void)
 {
 	char *prid, *usb_prod;
 
-	/* Default LEDs	*/
+	/* Default LEDs */
 	ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
 	ar7_led_data.leds = default_leds;
 

arch/mips/ath79/clock.c

@@ -198,7 +198,7 @@ static void __init ar934x_clocks_init(void)
 	dpll_base = ioremap(AR934X_SRIF_BASE, AR934X_SRIF_SIZE);
 
 	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-	if (bootstrap &	AR934X_BOOTSTRAP_REF_CLK_40)
+	if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
 		ath79_ref_clk.rate = 40 * 1000 * 1000;
 	else
 		ath79_ref_clk.rate = 25 * 1000 * 1000;

arch/mips/ath79/mach-ap121.c

@@ -69,7 +69,7 @@ static struct spi_board_info ap121_spi_info[] = {
 
 static struct ath79_spi_platform_data ap121_spi_data = {
 	.bus_num	= 0,
-	.num_chipselect	= 1,
+	.num_chipselect = 1,
 };
 
 static void __init ap121_setup(void)

arch/mips/ath79/mach-ap81.c

@@ -78,7 +78,7 @@ static struct spi_board_info ap81_spi_info[] = {
 
 static struct ath79_spi_platform_data ap81_spi_data = {
 	.bus_num	= 0,
-	.num_chipselect	= 1,
+	.num_chipselect = 1,
 };
 
 static void __init ap81_setup(void)

arch/mips/ath79/mach-db120.c

@@ -87,7 +87,7 @@ static struct spi_board_info db120_spi_info[] = {
 
 static struct ath79_spi_platform_data db120_spi_data = {
 	.bus_num	= 0,
-	.num_chipselect	= 1,
+	.num_chipselect = 1,
 };
 
 #ifdef CONFIG_PCI

arch/mips/ath79/mach-pb44.c

@@ -34,8 +34,8 @@
 #define PB44_KEYS_DEBOUNCE_INTERVAL	(3 * PB44_KEYS_POLL_INTERVAL)
 
 static struct i2c_gpio_platform_data pb44_i2c_gpio_data = {
-	.sda_pin        = PB44_GPIO_I2C_SDA,
-	.scl_pin        = PB44_GPIO_I2C_SCL,
+	.sda_pin	= PB44_GPIO_I2C_SDA,
+	.scl_pin	= PB44_GPIO_I2C_SCL,
 };
 
 static struct platform_device pb44_i2c_gpio_device = {
@@ -53,7 +53,7 @@ static struct pcf857x_platform_data pb44_pcf857x_data = {
 static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
 	{
 		I2C_BOARD_INFO("pcf8575", 0x20),
-		.platform_data  = &pb44_pcf857x_data,
+		.platform_data	= &pb44_pcf857x_data,
 	},
 };
 

arch/mips/bcm47xx/Makefile

@@ -3,5 +3,5 @@
 # under Linux.
 #
 
-obj-y 				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
 obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o

arch/mips/bcm47xx/nvram.c

@@ -5,8 +5,8 @@
  * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
  * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */

arch/mips/bcm47xx/sprom.c

@@ -60,8 +60,8 @@ static int get_nvram_var(const char *prefix, const char *postfix,
 
 #define NVRAM_READ_VAL(type)						\
 static void nvram_read_ ## type (const char *prefix,			\
-				 const char *postfix, const char *name,	\
-				 type *val, type allset, bool fallback)	\
+				 const char *postfix, const char *name, \
+				 type *val, type allset, bool fallback) \
 {									\
 	char buf[100];							\
 	int err;							\

arch/mips/bcm47xx/wgt634u.c

@@ -36,13 +36,13 @@ static struct gpio_led wgt634u_leds[] = {
 };
 
 static struct gpio_led_platform_data wgt634u_led_data = {
-	.num_leds =     ARRAY_SIZE(wgt634u_leds),
-	.leds =         wgt634u_leds,
+	.num_leds =	ARRAY_SIZE(wgt634u_leds),
+	.leds =		wgt634u_leds,
 };
 
 static struct platform_device wgt634u_gpio_leds = {
-	.name =         "leds-gpio",
-	.id =           -1,
+	.name =		"leds-gpio",
+	.id =		-1,
 	.dev = {
 		.platform_data = &wgt634u_led_data,
 	}
@@ -53,35 +53,35 @@ static struct platform_device wgt634u_gpio_leds = {
    firmware. */
 static struct mtd_partition wgt634u_partitions[] = {
 	{
-		.name       = "cfe",
-		.offset     = 0,
-		.size       = 0x60000,		/* 384k */
-		.mask_flags = MTD_WRITEABLE 	/* force read-only */
+		.name	    = "cfe",
+		.offset	    = 0,
+		.size	    = 0x60000,		/* 384k */
+		.mask_flags = MTD_WRITEABLE	/* force read-only */
 	},
 	{
-		.name   = "config",
+		.name	= "config",
 		.offset = 0x60000,
-		.size   = 0x20000		/* 128k */
+		.size	= 0x20000		/* 128k */
 	},
 	{
-		.name   = "linux",
+		.name	= "linux",
 		.offset = 0x80000,
-		.size   = 0x140000 		/* 1280k */
+		.size	= 0x140000		/* 1280k */
 	},
 	{
-		.name   = "jffs",
+		.name	= "jffs",
 		.offset = 0x1c0000,
-		.size   = 0x620000 		/* 6272k */
+		.size	= 0x620000		/* 6272k */
 	},
 	{
-		.name   = "nvram",
+		.name	= "nvram",
 		.offset = 0x7e0000,
-		.size   = 0x20000		/* 128k */
+		.size	= 0x20000		/* 128k */
 	},
 };
 
 static struct physmap_flash_data wgt634u_flash_data = {
-	.parts    = wgt634u_partitions,
+	.parts	  = wgt634u_partitions,
 	.nr_parts = ARRAY_SIZE(wgt634u_partitions)
 };
 
@@ -90,9 +90,9 @@ static struct resource wgt634u_flash_resource = {
 };
 
 static struct platform_device wgt634u_flash = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev           = { .platform_data = &wgt634u_flash_data, },
+	.name	       = "physmap-flash",
+	.id	       = 0,
+	.dev	       = { .platform_data = &wgt634u_flash_data, },
 	.resource      = &wgt634u_flash_resource,
 	.num_resources = 1,
 };

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -406,9 +406,9 @@ static struct board_info __initdata board_FAST2404 = {
 	.expected_cpu_id		= 0x6348,
 
 	.has_uart0			= 1,
-        .has_enet0			= 1,
-        .has_enet1			= 1,
-        .has_pci			= 1,
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
 
 	.enet0 = {
 		.has_phy		= 1,
@@ -591,22 +591,22 @@ static struct board_info __initdata board_96358vw2 = {
 };
 
 static struct board_info __initdata board_AGPFS0 = {
-	.name                           = "AGPF-S0",
-	.expected_cpu_id                = 0x6358,
+	.name				= "AGPF-S0",
+	.expected_cpu_id		= 0x6358,
 
 	.has_uart0			= 1,
-	.has_enet0                      = 1,
-	.has_enet1                      = 1,
-	.has_pci                        = 1,
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
 
 	.enet0 = {
-		.has_phy                = 1,
-		.use_internal_phy       = 1,
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
 	},
 
 	.enet1 = {
-		.force_speed_100        = 1,
-		.force_duplex_full      = 1,
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
 	},
 
 	.has_ohci0 = 1,
@@ -677,7 +677,7 @@ static struct ssb_sprom bcm63xx_sprom = {
 	.revision		= 0x02,
 	.board_rev		= 0x17,
 	.country_code		= 0x0,
-	.ant_available_bg 	= 0x3,
+	.ant_available_bg	= 0x3,
 	.pa0b0			= 0x15ae,
 	.pa0b1			= 0xfa85,
 	.pa0b2			= 0xfe8d,

arch/mips/boot/Makefile

@@ -24,7 +24,7 @@ strip-flags   := $(addprefix --remove-section=,$(drop-sections))
 hostprogs-y := elf2ecoff
 
 targets := vmlinux.ecoff
-quiet_cmd_ecoff = ECOFF   $@
+quiet_cmd_ecoff = ECOFF	  $@
       cmd_ecoff = $(obj)/elf2ecoff $(VMLINUX) $@ $(e2eflag)
 $(obj)/vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) FORCE
 	$(call if_changed,ecoff)

arch/mips/boot/compressed/Makefile

@@ -51,7 +51,7 @@ $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
 
 targets += piggy.o
 OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
-                        --set-section-flags=.image=contents,alloc,load,readonly,data
+			--set-section-flags=.image=contents,alloc,load,readonly,data
 $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
 	$(call if_changed,objcopy)
 
@@ -67,9 +67,9 @@ endif
 
 vmlinuzobjs-y += $(obj)/piggy.o
 
-quiet_cmd_zld = LD      $@
+quiet_cmd_zld = LD	$@
       cmd_zld = $(LD) $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T $< $(vmlinuzobjs-y) -o $@
-quiet_cmd_strip = STRIP   $@
+quiet_cmd_strip = STRIP	  $@
       cmd_strip = $(STRIP) -s $@
 vmlinuz: $(src)/ld.script $(vmlinuzobjs-y) $(obj)/calc_vmlinuz_load_addr
 	$(call cmd,zld)
@@ -96,7 +96,7 @@ quiet_cmd_32 = OBJCOPY $@
 vmlinuz.32: vmlinuz
 	$(call cmd,32)
 
-quiet_cmd_ecoff = ECOFF   $@
+quiet_cmd_ecoff = ECOFF	  $@
       cmd_ecoff = $< $(VMLINUZ) $@ $(e2eflag)
 vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ)
 	$(call cmd,ecoff)

arch/mips/boot/compressed/calc_vmlinuz_load_addr.c

@@ -1,8 +1,8 @@
 /*
  * Copyright (C) 2010 "Wu Zhangjin" <wuzhangjin@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */

arch/mips/boot/compressed/decompress.c

@@ -5,8 +5,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */

arch/mips/boot/compressed/head.S

@@ -32,8 +32,8 @@ start:
 	bne	a2, a0, 1b
 	 addiu	a0, a0, 4
 
-	PTR_LA	a0, (.heap)          /* heap address */
-	PTR_LA  sp, (.stack + 8192)  /* stack address */
+	PTR_LA	a0, (.heap)	     /* heap address */
+	PTR_LA	sp, (.stack + 8192)  /* stack address */
 
 	PTR_LA	ra, 2f
 	PTR_LA	k0, decompress_kernel

arch/mips/boot/ecoff.h

@@ -2,48 +2,48 @@
  * Some ECOFF definitions.
  */
 typedef struct filehdr {
-        unsigned short  f_magic;        /* magic number */
-        unsigned short  f_nscns;        /* number of sections */
-        long            f_timdat;       /* time & date stamp */
-        long            f_symptr;       /* file pointer to symbolic header */
-        long            f_nsyms;        /* sizeof(symbolic hdr) */
-        unsigned short  f_opthdr;       /* sizeof(optional hdr) */
-        unsigned short  f_flags;        /* flags */
+	unsigned short	f_magic;	/* magic number */
+	unsigned short	f_nscns;	/* number of sections */
+	long		f_timdat;	/* time & date stamp */
+	long		f_symptr;	/* file pointer to symbolic header */
+	long		f_nsyms;	/* sizeof(symbolic hdr) */
+	unsigned short	f_opthdr;	/* sizeof(optional hdr) */
+	unsigned short	f_flags;	/* flags */
 } FILHDR;
-#define FILHSZ  sizeof(FILHDR)
+#define FILHSZ	sizeof(FILHDR)
 
 #define OMAGIC		0407
 #define MIPSEBMAGIC	0x160
 #define MIPSELMAGIC	0x162
 
 typedef struct scnhdr {
-        char            s_name[8];      /* section name */
-        long            s_paddr;        /* physical address, aliased s_nlib */
-        long            s_vaddr;        /* virtual address */
-        long            s_size;         /* section size */
-        long            s_scnptr;       /* file ptr to raw data for section */
-        long            s_relptr;       /* file ptr to relocation */
-        long            s_lnnoptr;      /* file ptr to gp histogram */
-        unsigned short  s_nreloc;       /* number of relocation entries */
-        unsigned short  s_nlnno;        /* number of gp histogram entries */
-        long            s_flags;        /* flags */
+	char		s_name[8];	/* section name */
+	long		s_paddr;	/* physical address, aliased s_nlib */
+	long		s_vaddr;	/* virtual address */
+	long		s_size;		/* section size */
+	long		s_scnptr;	/* file ptr to raw data for section */
+	long		s_relptr;	/* file ptr to relocation */
+	long		s_lnnoptr;	/* file ptr to gp histogram */
+	unsigned short	s_nreloc;	/* number of relocation entries */
+	unsigned short	s_nlnno;	/* number of gp histogram entries */
+	long		s_flags;	/* flags */
 } SCNHDR;
 #define SCNHSZ		sizeof(SCNHDR)
 #define SCNROUND	((long)16)
 
 typedef struct aouthdr {
-        short   magic;          /* see above                            */
-        short   vstamp;         /* version stamp                        */
-        long    tsize;          /* text size in bytes, padded to DW bdry*/
-        long    dsize;          /* initialized data "  "                */
-        long    bsize;          /* uninitialized data "   "             */
-        long    entry;          /* entry pt.                            */
-        long    text_start;     /* base of text used for this file      */
-        long    data_start;     /* base of data used for this file      */
-        long    bss_start;      /* base of bss used for this file       */
-        long    gprmask;        /* general purpose register mask        */
-        long    cprmask[4];     /* co-processor register masks          */
-        long    gp_value;       /* the gp value used for this object    */
+	short	magic;		/* see above				*/
+	short	vstamp;		/* version stamp			*/
+	long	tsize;		/* text size in bytes, padded to DW bdry*/
+	long	dsize;		/* initialized data "  "		*/
+	long	bsize;		/* uninitialized data "	  "		*/
+	long	entry;		/* entry pt.				*/
+	long	text_start;	/* base of text used for this file	*/
+	long	data_start;	/* base of data used for this file	*/
+	long	bss_start;	/* base of bss used for this file	*/
+	long	gprmask;	/* general purpose register mask	*/
+	long	cprmask[4];	/* co-processor register masks		*/
+	long	gp_value;	/* the gp value used for this object	*/
 } AOUTHDR;
 #define AOUTHSZ sizeof(AOUTHDR)
 
@@ -51,7 +51,7 @@ typedef struct aouthdr {
 #define NMAGIC		0410
 #define ZMAGIC		0413
 #define SMAGIC		0411
-#define LIBMAGIC        0443
+#define LIBMAGIC	0443
 
 #define N_TXTOFF(f, a) \
  ((a).magic == ZMAGIC || (a).magic == LIBMAGIC ? 0 : \

arch/mips/boot/elf2ecoff.c

@@ -29,7 +29,7 @@
 /* elf2ecoff.c
 
    This program converts an elf executable to an ECOFF executable.
-   No symbol table is retained.   This is useful primarily in building
+   No symbol table is retained.	  This is useful primarily in building
    net-bootable kernels for machines (e.g., DECstation and Alpha) which
    only support the ECOFF object file format. */
 
@@ -341,7 +341,7 @@ int main(int argc, char *argv[])
 
 	/* Figure out if we can cram the program header into an ECOFF
 	   header...  Basically, we can't handle anything but loadable
-	   segments, but we can ignore some kinds of segments.  We can't
+	   segments, but we can ignore some kinds of segments.	We can't
 	   handle holes in the address space.  Segments may be out of order,
 	   so we sort them first. */
 
@@ -514,7 +514,7 @@ int main(int argc, char *argv[])
 
 		for (i = 0; i < nosecs; i++) {
 			printf
-			    ("Section %d: %s phys %lx  size %lx  file offset %lx\n",
+			    ("Section %d: %s phys %lx  size %lx	 file offset %lx\n",
 			     i, esecs[i].s_name, esecs[i].s_paddr,
 			     esecs[i].s_size, esecs[i].s_scnptr);
 		}
@@ -551,7 +551,7 @@ int main(int argc, char *argv[])
 	}
 
 	/*
-	 * Copy the loadable sections.   Zero-fill any gaps less than 64k;
+	 * Copy the loadable sections.	 Zero-fill any gaps less than 64k;
 	 * complain about any zero-filling, and die if we're asked to zero-fill
 	 * more than 64k.
 	 */

arch/mips/cavium-octeon/Makefile

@@ -17,7 +17,7 @@ obj-y += dma-octeon.o flash_setup.o
 obj-y += octeon-memcpy.o
 obj-y += executive/
 
-obj-$(CONFIG_SMP)                     += smp.o
+obj-$(CONFIG_SMP)		      += smp.o
 
 DTS_FILES = octeon_3xxx.dts octeon_68xx.dts
 DTB_FILES = $(patsubst %.dts, %.dtb, $(DTS_FILES))

arch/mips/cavium-octeon/executive/cvmx-bootmem.c

@@ -155,8 +155,8 @@ int cvmx_bootmem_init(void *mem_desc_ptr)
 	 *
 	 * Linux 64 bit: Set XKPHYS bit
 	 * Linux 32 bit: use mmap to create mapping, use virtual address
-	 * CVMX 64 bit:  use physical address directly
-	 * CVMX 32 bit:  use physical address directly
+	 * CVMX 64 bit:	 use physical address directly
+	 * CVMX 32 bit:	 use physical address directly
 	 *
 	 * Note that the CVMX environment assumes the use of 1-1 TLB
 	 * mappings so that the physical addresses can be used
@@ -398,7 +398,7 @@ error_out:
 int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags)
 {
 	uint64_t cur_addr;
-	uint64_t prev_addr = 0;	/* zero is invalid */
+	uint64_t prev_addr = 0; /* zero is invalid */
 	int retval = 0;
 
 #ifdef DEBUG
@@ -424,7 +424,7 @@ int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags)
 	if (cur_addr == 0 || phy_addr < cur_addr) {
 		/* add at front of list - special case with changing head ptr */
 		if (cur_addr && phy_addr + size > cur_addr)
-			goto bootmem_free_done;	/* error, overlapping section */
+			goto bootmem_free_done; /* error, overlapping section */
 		else if (phy_addr + size == cur_addr) {
 			/* Add to front of existing first block */
 			cvmx_bootmem_phy_set_next(phy_addr,
@@ -611,7 +611,7 @@ int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags)
 	}
 
 	cvmx_bootmem_unlock();
-	return named_block_ptr != NULL;	/* 0 on failure, 1 on success */
+	return named_block_ptr != NULL; /* 0 on failure, 1 on success */
 }
 
 int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr,

arch/mips/cavium-octeon/executive/cvmx-helper-board.c

@@ -203,10 +203,10 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
  * enumeration from the bootloader.
  *
  * @ipd_port: IPD input port associated with the port we want to get link
- *                 status for.
+ *		   status for.
  *
  * Returns The ports link status. If the link isn't fully resolved, this must
- *         return zero.
+ *	   return zero.
  */
 cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 {
@@ -357,16 +357,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 				result.s.link_up = 1;
 				result.s.full_duplex = ((phy_status >> 13) & 1);
 				switch ((phy_status >> 14) & 3) {
-				case 0:	/* 10 Mbps */
+				case 0: /* 10 Mbps */
 					result.s.speed = 10;
 					break;
-				case 1:	/* 100 Mbps */
+				case 1: /* 100 Mbps */
 					result.s.speed = 100;
 					break;
-				case 2:	/* 1 Gbps */
+				case 2: /* 1 Gbps */
 					result.s.speed = 1000;
 					break;
-				case 3:	/* Illegal */
+				case 3: /* Illegal */
 					result.u64 = 0;
 					break;
 				}
@@ -391,16 +391,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 		result.s.link_up = inband_status.s.status;
 		result.s.full_duplex = inband_status.s.duplex;
 		switch (inband_status.s.speed) {
-		case 0:	/* 10 Mbps */
+		case 0: /* 10 Mbps */
 			result.s.speed = 10;
 			break;
-		case 1:	/* 100 Mbps */
+		case 1: /* 100 Mbps */
 			result.s.speed = 100;
 			break;
-		case 2:	/* 1 Gbps */
+		case 2: /* 1 Gbps */
 			result.s.speed = 1000;
 			break;
-		case 3:	/* Illegal */
+		case 3: /* Illegal */
 			result.u64 = 0;
 			break;
 		}
@@ -429,9 +429,9 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
  *
  * @phy_addr:  The address of the PHY to program
  * @enable_autoneg:
- *                  Non zero if you want to enable auto-negotiation.
+ *		    Non zero if you want to enable auto-negotiation.
  * @link_info: Link speed to program. If the speed is zero and auto-negotiation
- *                  is enabled, all possible negotiation speeds are advertised.
+ *		    is enabled, all possible negotiation speeds are advertised.
  *
  * Returns Zero on success, negative on failure
  */
@@ -607,10 +607,10 @@ int cvmx_helper_board_link_set_phy(int phy_addr,
  *
  * @interface: Interface to probe
  * @supported_ports:
- *                  Number of ports Octeon supports.
+ *		    Number of ports Octeon supports.
  *
  * Returns Number of ports the actual board supports. Many times this will
- *         simple be "support_ports".
+ *	   simple be "support_ports".
  */
 int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
 {

arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c

@@ -79,10 +79,10 @@ void cvmx_helper_qlm_jtag_init(void)
  * @qlm:    QLM to shift value into
  * @bits:   Number of bits to shift in (1-32).
  * @data:   Data to shift in. Bit 0 enters the chain first, followed by
- *               bit 1, etc.
+ *		 bit 1, etc.
  *
  * Returns The low order bits of the JTAG chain that shifted out of the
- *         circle.
+ *	   circle.
  */
 uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data)
 {

arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c

@@ -131,7 +131,7 @@ void cvmx_helper_rgmii_internal_loopback(int port)
  * @interface: Interface to setup
  * @port:      Port to setup (0..3)
  * @cpu_clock_hz:
- *                  Chip frequency in Hertz
+ *		    Chip frequency in Hertz
  *
  * Returns Zero on success, negative on failure
  */
@@ -409,14 +409,14 @@ int __cvmx_helper_rgmii_link_set(int ipd_port,
 			mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
 
 	/*
-	 * Port  .en  .type  .p0mii  Configuration
-	 * ----  ---  -----  ------  -----------------------------------------
-	 *  X      0     X      X    All links are disabled.
-	 *  0      1     X      0    Port 0 is RGMII
-	 *  0      1     X      1    Port 0 is MII
-	 *  1      1     0      X    Ports 1 and 2 are configured as RGMII ports.
-	 *  1      1     1      X    Port 1: GMII/MII; Port 2: disabled. GMII or
-	 *                           MII port is selected by GMX_PRT1_CFG[SPEED].
+	 * Port	 .en  .type  .p0mii  Configuration
+	 * ----	 ---  -----  ------  -----------------------------------------
+	 *  X	   0	 X	X    All links are disabled.
+	 *  0	   1	 X	0    Port 0 is RGMII
+	 *  0	   1	 X	1    Port 0 is MII
+	 *  1	   1	 0	X    Ports 1 and 2 are configured as RGMII ports.
+	 *  1	   1	 1	X    Port 1: GMII/MII; Port 2: disabled. GMII or
+	 *			     MII port is selected by GMX_PRT1_CFG[SPEED].
 	 */
 
 			/* In MII mode, CLK_CNT = 1. */
@@ -464,9 +464,9 @@ int __cvmx_helper_rgmii_link_set(int ipd_port,
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */

arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c

@@ -523,9 +523,9 @@ int __cvmx_helper_sgmii_link_set(int ipd_port,
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */

arch/mips/cavium-octeon/executive/cvmx-helper-spi.c

@@ -160,16 +160,16 @@ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port)
 		result.s.link_up = inband.s.status;
 		result.s.full_duplex = inband.s.duplex;
 		switch (inband.s.speed) {
-		case 0:	/* 10 Mbps */
+		case 0: /* 10 Mbps */
 			result.s.speed = 10;
 			break;
-		case 1:	/* 100 Mbps */
+		case 1: /* 100 Mbps */
 			result.s.speed = 100;
 			break;
-		case 2:	/* 1 Gbps */
+		case 2: /* 1 Gbps */
 			result.s.speed = 1000;
 			break;
-		case 3:	/* Illegal */
+		case 3: /* Illegal */
 			result.s.speed = 0;
 			result.s.link_up = 0;
 			break;

arch/mips/cavium-octeon/executive/cvmx-helper-util.c

@@ -96,9 +96,9 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work)
 	uint8_t *end_of_data;
 
 	cvmx_dprintf("Packet Length:   %u\n", work->len);
-	cvmx_dprintf("    Input Port:  %u\n", work->ipprt);
-	cvmx_dprintf("    QoS:         %u\n", work->qos);
-	cvmx_dprintf("    Buffers:     %u\n", work->word2.s.bufs);
+	cvmx_dprintf("	  Input Port:  %u\n", work->ipprt);
+	cvmx_dprintf("	  QoS:	       %u\n", work->qos);
+	cvmx_dprintf("	  Buffers:     %u\n", work->word2.s.bufs);
 
 	if (work->word2.s.bufs == 0) {
 		union cvmx_ipd_wqe_fpa_queue wqe_pool;
@@ -132,14 +132,14 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work)
 	while (remaining_bytes) {
 		start_of_buffer =
 		    ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7;
-		cvmx_dprintf("    Buffer Start:%llx\n",
+		cvmx_dprintf("	  Buffer Start:%llx\n",
 			     (unsigned long long)start_of_buffer);
-		cvmx_dprintf("    Buffer I   : %u\n", buffer_ptr.s.i);
-		cvmx_dprintf("    Buffer Back: %u\n", buffer_ptr.s.back);
-		cvmx_dprintf("    Buffer Pool: %u\n", buffer_ptr.s.pool);
-		cvmx_dprintf("    Buffer Data: %llx\n",
+		cvmx_dprintf("	  Buffer I   : %u\n", buffer_ptr.s.i);
+		cvmx_dprintf("	  Buffer Back: %u\n", buffer_ptr.s.back);
+		cvmx_dprintf("	  Buffer Pool: %u\n", buffer_ptr.s.pool);
+		cvmx_dprintf("	  Buffer Data: %llx\n",
 			     (unsigned long long)buffer_ptr.s.addr);
-		cvmx_dprintf("    Buffer Size: %u\n", buffer_ptr.s.size);
+		cvmx_dprintf("	  Buffer Size: %u\n", buffer_ptr.s.size);
 
 		cvmx_dprintf("\t\t");
 		data_address = (uint8_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr);
@@ -172,11 +172,11 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work)
  *
  * @queue:  Input queue to setup RED on (0-7)
  * @pass_thresh:
- *               Packets will begin slowly dropping when there are less than
- *               this many packet buffers free in FPA 0.
+ *		 Packets will begin slowly dropping when there are less than
+ *		 this many packet buffers free in FPA 0.
  * @drop_thresh:
- *               All incomming packets will be dropped when there are less
- *               than this many free packet buffers in FPA 0.
+ *		 All incomming packets will be dropped when there are less
+ *		 than this many free packet buffers in FPA 0.
  * Returns Zero on success. Negative on failure
  */
 int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh)
@@ -207,11 +207,11 @@ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh)
  * Setup Random Early Drop to automatically begin dropping packets.
  *
  * @pass_thresh:
- *               Packets will begin slowly dropping when there are less than
- *               this many packet buffers free in FPA 0.
+ *		 Packets will begin slowly dropping when there are less than
+ *		 this many packet buffers free in FPA 0.
  * @drop_thresh:
- *               All incomming packets will be dropped when there are less
- *               than this many free packet buffers in FPA 0.
+ *		 All incomming packets will be dropped when there are less
+ *		 than this many free packet buffers in FPA 0.
  * Returns Zero on success. Negative on failure
  */
 int cvmx_helper_setup_red(int pass_thresh, int drop_thresh)

arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c

@@ -321,9 +321,9 @@ int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */

arch/mips/cavium-octeon/executive/cvmx-helper.c

@@ -111,7 +111,7 @@ int cvmx_helper_ports_on_interface(int interface)
  * @interface: Interface to probe
  *
  * Returns Mode of the interface. Unknown or unsupported interfaces return
- *         DISABLED.
+ *	   DISABLED.
  */
 cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
 {
@@ -187,7 +187,7 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
  * the defines in executive-config.h.
  *
  * @ipd_port: Port to configure. This follows the IPD numbering, not the
- *                 per interface numbering
+ *		   per interface numbering
  *
  * Returns Zero on success, negative on failure
  */
@@ -591,7 +591,7 @@ static int __cvmx_helper_packet_hardware_enable(int interface)
  * Function to adjust internal IPD pointer alignments
  *
  * Returns 0 on success
- *         !0 on failure
+ *	   !0 on failure
  */
 int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
 {
@@ -1068,9 +1068,9 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */

arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c

@@ -85,11 +85,11 @@ void __cvmx_interrupt_gmxx_enable(int interface)
 	if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) {
 		if (mode.s.en) {
 			switch (mode.cn56xx.mode) {
-			case 1:	/* XAUI */
+			case 1: /* XAUI */
 				num_ports = 1;
 				break;
-			case 2:	/* SGMII */
-			case 3:	/* PICMG */
+			case 2: /* SGMII */
+			case 3: /* PICMG */
 				num_ports = 4;
 				break;
 			default:	/* Disabled */

arch/mips/cavium-octeon/executive/cvmx-l2c.c

@@ -147,7 +147,7 @@ int cvmx_l2c_set_hw_way_partition(uint32_t mask)
 	mask &= valid_mask;
 
 	/* A UMSK setting which blocks all L2C Ways is an error on some chips */
-	if (mask == valid_mask  && !OCTEON_IS_MODEL(OCTEON_CN63XX))
+	if (mask == valid_mask	&& !OCTEON_IS_MODEL(OCTEON_CN63XX))
 		return -1;
 
 	if (OCTEON_IS_MODEL(OCTEON_CN63XX))
@@ -438,7 +438,7 @@ void cvmx_l2c_flush(void)
 		for (set = 0; set < n_set; set++) {
 			for (assoc = 0; assoc < n_assoc; assoc++) {
 				address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-						       (assoc << assoc_shift) |	(set << set_shift));
+						       (assoc << assoc_shift) | (set << set_shift));
 				CVMX_CACHE_WBIL2I(address, 0);
 			}
 		}
@@ -573,8 +573,8 @@ union __cvmx_l2c_tag {
  * @index:  Index of the cacheline
  *
  * Returns The Octeon model specific tag structure.  This is
- *         translated by a wrapper function to a generic form that is
- *         easier for applications to use.
+ *	   translated by a wrapper function to a generic form that is
+ *	   easier for applications to use.
  */
 static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index)
 {
@@ -618,12 +618,12 @@ static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index)
 		".set push\n\t"
 		".set mips64\n\t"
 		".set noreorder\n\t"
-		"sd    %[dbg_val], 0(%[dbg_addr])\n\t"   /* Enter debug mode, wait for store */
+		"sd    %[dbg_val], 0(%[dbg_addr])\n\t"	 /* Enter debug mode, wait for store */
 		"ld    $0, 0(%[dbg_addr])\n\t"
-		"ld    %[tag_val], 0(%[tag_addr])\n\t"   /* Read L2C tag data */
-		"sd    $0, 0(%[dbg_addr])\n\t"          /* Exit debug mode, wait for store */
+		"ld    %[tag_val], 0(%[tag_addr])\n\t"	 /* Read L2C tag data */
+		"sd    $0, 0(%[dbg_addr])\n\t"		/* Exit debug mode, wait for store */
 		"ld    $0, 0(%[dbg_addr])\n\t"
-		"cache 9, 0($0)\n\t"             /* Invalidate dcache to discard debug data */
+		"cache 9, 0($0)\n\t"		 /* Invalidate dcache to discard debug data */
 		".set pop"
 		: [tag_val] "=r" (tag_val)
 		: [dbg_addr] "r" (dbg_addr), [dbg_val] "r" (debug_val), [tag_addr] "r" (debug_tag_addr)
@@ -664,10 +664,10 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index)
 		CVMX_SYNC;   /* make sure CVMX_L2C_TADX_TAG is updated */
 		l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0));
 
-		tag.s.V     = l2c_tadx_tag.s.valid;
-		tag.s.D     = l2c_tadx_tag.s.dirty;
-		tag.s.L     = l2c_tadx_tag.s.lock;
-		tag.s.U     = l2c_tadx_tag.s.use;
+		tag.s.V	    = l2c_tadx_tag.s.valid;
+		tag.s.D	    = l2c_tadx_tag.s.dirty;
+		tag.s.L	    = l2c_tadx_tag.s.lock;
+		tag.s.U	    = l2c_tadx_tag.s.use;
 		tag.s.addr  = l2c_tadx_tag.s.tag;
 	} else {
 		union __cvmx_l2c_tag tmp_tag;
@@ -679,34 +679,34 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index)
 		 * as it can represent all models.
 		 */
 		if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
-			tag.s.V    = tmp_tag.cn58xx.V;
-			tag.s.D    = tmp_tag.cn58xx.D;
-			tag.s.L    = tmp_tag.cn58xx.L;
-			tag.s.U    = tmp_tag.cn58xx.U;
+			tag.s.V	   = tmp_tag.cn58xx.V;
+			tag.s.D	   = tmp_tag.cn58xx.D;
+			tag.s.L	   = tmp_tag.cn58xx.L;
+			tag.s.U	   = tmp_tag.cn58xx.U;
 			tag.s.addr = tmp_tag.cn58xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN38XX)) {
-			tag.s.V    = tmp_tag.cn38xx.V;
-			tag.s.D    = tmp_tag.cn38xx.D;
-			tag.s.L    = tmp_tag.cn38xx.L;
-			tag.s.U    = tmp_tag.cn38xx.U;
+			tag.s.V	   = tmp_tag.cn38xx.V;
+			tag.s.D	   = tmp_tag.cn38xx.D;
+			tag.s.L	   = tmp_tag.cn38xx.L;
+			tag.s.U	   = tmp_tag.cn38xx.U;
 			tag.s.addr = tmp_tag.cn38xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) {
-			tag.s.V    = tmp_tag.cn31xx.V;
-			tag.s.D    = tmp_tag.cn31xx.D;
-			tag.s.L    = tmp_tag.cn31xx.L;
-			tag.s.U    = tmp_tag.cn31xx.U;
+			tag.s.V	   = tmp_tag.cn31xx.V;
+			tag.s.D	   = tmp_tag.cn31xx.D;
+			tag.s.L	   = tmp_tag.cn31xx.L;
+			tag.s.U	   = tmp_tag.cn31xx.U;
 			tag.s.addr = tmp_tag.cn31xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) {
-			tag.s.V    = tmp_tag.cn30xx.V;
-			tag.s.D    = tmp_tag.cn30xx.D;
-			tag.s.L    = tmp_tag.cn30xx.L;
-			tag.s.U    = tmp_tag.cn30xx.U;
+			tag.s.V	   = tmp_tag.cn30xx.V;
+			tag.s.D	   = tmp_tag.cn30xx.D;
+			tag.s.L	   = tmp_tag.cn30xx.L;
+			tag.s.U	   = tmp_tag.cn30xx.U;
 			tag.s.addr = tmp_tag.cn30xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) {
-			tag.s.V    = tmp_tag.cn50xx.V;
-			tag.s.D    = tmp_tag.cn50xx.D;
-			tag.s.L    = tmp_tag.cn50xx.L;
-			tag.s.U    = tmp_tag.cn50xx.U;
+			tag.s.V	   = tmp_tag.cn50xx.V;
+			tag.s.D	   = tmp_tag.cn50xx.D;
+			tag.s.L	   = tmp_tag.cn50xx.L;
+			tag.s.U	   = tmp_tag.cn50xx.U;
 			tag.s.addr = tmp_tag.cn50xx.addr;
 		} else {
 			cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__);
@@ -865,7 +865,7 @@ void cvmx_l2c_flush_line(uint32_t assoc, uint32_t index)
 		uint64_t address;
 		/* Create the address based on index and association.
 		 * Bits<20:17> select the way of the cache block involved in
-		 *             the operation
+		 *	       the operation
 		 * Bits<16:7> of the effect address select the index
 		 */
 		address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,

arch/mips/cavium-octeon/executive/cvmx-pko.c

@@ -99,7 +99,7 @@ void cvmx_pko_initialize_global(void)
  * be called after the FPA has been initialized and filled with pages.
  *
  * Returns 0 on success
- *         !0 on failure
+ *	   !0 on failure
  */
 int cvmx_pko_initialize_local(void)
 {
@@ -186,19 +186,19 @@ void cvmx_pko_shutdown(void)
 /**
  * Configure a output port and the associated queues for use.
  *
- * @port:       Port to configure.
+ * @port:	Port to configure.
  * @base_queue: First queue number to associate with this port.
  * @num_queues: Number of queues to associate with this port
- * @priority:   Array of priority levels for each queue. Values are
- *                   allowed to be 0-8. A value of 8 get 8 times the traffic
- *                   of a value of 1.  A value of 0 indicates that no rounds
- *                   will be participated in. These priorities can be changed
- *                   on the fly while the pko is enabled. A priority of 9
- *                   indicates that static priority should be used.  If static
- *                   priority is used all queues with static priority must be
- *                   contiguous starting at the base_queue, and lower numbered
- *                   queues have higher priority than higher numbered queues.
- *                   There must be num_queues elements in the array.
+ * @priority:	Array of priority levels for each queue. Values are
+ *		     allowed to be 0-8. A value of 8 get 8 times the traffic
+ *		     of a value of 1.  A value of 0 indicates that no rounds
+ *		     will be participated in. These priorities can be changed
+ *		     on the fly while the pko is enabled. A priority of 9
+ *		     indicates that static priority should be used.  If static
+ *		     priority is used all queues with static priority must be
+ *		     contiguous starting at the base_queue, and lower numbered
+ *		     queues have higher priority than higher numbered queues.
+ *		     There must be num_queues elements in the array.
  */
 cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue,
 				       uint64_t num_queues,
@@ -440,7 +440,7 @@ void cvmx_pko_show_queue_map()
  * @port:      Port to rate limit
  * @packets_s: Maximum packet/sec
  * @burst:     Maximum number of packets to burst in a row before rate
- *                  limiting cuts in.
+ *		    limiting cuts in.
  *
  * Returns Zero on success, negative on failure
  */
@@ -473,7 +473,7 @@ int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst)
  * @port:   Port to rate limit
  * @bits_s: PKO rate limit in bits/sec
  * @burst:  Maximum number of bits to burst before rate
- *               limiting cuts in.
+ *		 limiting cuts in.
  *
  * Returns Zero on success, negative on failure
  */

arch/mips/cavium-octeon/executive/cvmx-spi.c

@@ -69,7 +69,7 @@ static cvmx_spi_callbacks_t cvmx_spi_callbacks = {
 /**
  * Get current SPI4 initialization callbacks
  *
- * @callbacks:  Pointer to the callbacks structure.to fill
+ * @callbacks:	Pointer to the callbacks structure.to fill
  *
  * Returns Pointer to cvmx_spi_callbacks_t structure.
  */
@@ -92,11 +92,11 @@ void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks)
  * Initialize and start the SPI interface.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  * @num_ports: Number of SPI ports to configure
  *
@@ -138,11 +138,11 @@ int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout,
  * with its correspondent system.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  *
  * Returns Zero on success, negative of failure.
@@ -160,7 +160,7 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout)
 	INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode);
 
 	/* NOTE: Calendar setup is not performed during restart */
-	/*       Refer to cvmx_spi_start_interface() for the full sequence */
+	/*	 Refer to cvmx_spi_start_interface() for the full sequence */
 
 	/* Callback to perform clock detection */
 	INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout);
@@ -182,11 +182,11 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout)
  * Callback to perform SPI4 reset
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)
@@ -297,11 +297,11 @@ int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode)
  * Callback to setup calendar and miscellaneous settings before clock detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @num_ports: Number of ports to configure on SPI
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -382,7 +382,7 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode,
 		stxx_spi4_dat.u64 = 0;
 		/*Minimum needed by dynamic alignment */
 		stxx_spi4_dat.s.alpha = 32;
-		stxx_spi4_dat.s.max_t = 0xFFFF;	/*Minimum interval is 0x20 */
+		stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */
 		cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface),
 			       stxx_spi4_dat.u64);
 
@@ -416,11 +416,11 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode,
  * Callback to perform clock detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -494,11 +494,11 @@ int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout)
  * Callback to perform link training
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for link to be trained (in seconds)
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -563,11 +563,11 @@ int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout)
  * Callback to perform calendar data synchronization
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for calendar data in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -620,11 +620,11 @@ int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout)
  * Callback to handle interface up
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)

arch/mips/cavium-octeon/executive/cvmx-sysinfo.c

@@ -74,26 +74,26 @@ EXPORT_SYMBOL(cvmx_sysinfo_get);
 
 /**
  * This function is used in non-simple executive environments (such as
- * Linux kernel, u-boot, etc.)  to configure the minimal fields that
+ * Linux kernel, u-boot, etc.)	to configure the minimal fields that
  * are required to use simple executive files directly.
  *
  * Locking (if required) must be handled outside of this
  * function
  *
  * @phy_mem_desc_ptr:
- *                   Pointer to global physical memory descriptor
- *                   (bootmem descriptor) @board_type: Octeon board
- *                   type enumeration
+ *		     Pointer to global physical memory descriptor
+ *		     (bootmem descriptor) @board_type: Octeon board
+ *		     type enumeration
  *
  * @board_rev_major:
- *                   Board major revision
+ *		     Board major revision
  * @board_rev_minor:
- *                   Board minor revision
+ *		     Board minor revision
  * @cpu_clock_hz:
- *                   CPU clock freqency in hertz
+ *		     CPU clock freqency in hertz
  *
  * Returns 0: Failure
- *         1: success
+ *	   1: success
  */
 int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
 				    uint16_t board_type,

arch/mips/cavium-octeon/octeon-irq.c

@@ -1542,7 +1542,7 @@ static bool octeon_irq_ciu2_is_edge(unsigned int line, unsigned int bit)
 
 	if (line == 3) /* MIO */
 		switch (bit) {
-		case 2:  /* IPD_DRP */
+		case 2:	 /* IPD_DRP */
 		case 8 ... 11: /* Timers */
 		case 48: /* PTP */
 			edge = true;
@@ -1553,7 +1553,7 @@ static bool octeon_irq_ciu2_is_edge(unsigned int line, unsigned int bit)
 	else if (line == 6) /* PKT */
 		switch (bit) {
 		case 52 ... 53: /* ILK_DRP */
-		case 8 ... 12:  /* GMX_DRP */
+		case 8 ... 12:	/* GMX_DRP */
 			edge = true;
 			break;
 		default:

arch/mips/cavium-octeon/octeon-memcpy.S

@@ -116,15 +116,15 @@
 
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 #define LDFIRST LOADR
-#define LDREST  LOADL
+#define LDREST	LOADL
 #define STFIRST STORER
-#define STREST  STOREL
+#define STREST	STOREL
 #define SHIFT_DISCARD SLLV
 #else
 #define LDFIRST LOADL
-#define LDREST  LOADR
+#define LDREST	LOADR
 #define STFIRST STOREL
-#define STREST  STORER
+#define STREST	STORER
 #define SHIFT_DISCARD SRLV
 #endif
 
@@ -316,9 +316,9 @@ EXC(	 STORE	t0, -8(dst),		s_exc_p1u)
 
 src_unaligned:
 #define rem t8
-	SRL	t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
+	SRL	t0, len, LOG_NBYTES+2	 # +2 for 4 units/iter
 	beqz	t0, cleanup_src_unaligned
-	 and	rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
+	 and	rem, len, (4*NBYTES-1)	 # rem = len % 4*NBYTES
 1:
 /*
  * Avoid consecutive LD*'s to the same register since some mips
@@ -326,13 +326,13 @@ src_unaligned:
  * It's OK to load FIRST(N+1) before REST(N) because the two addresses
  * are to the same unit (unless src is aligned, but it's not).
  */
-EXC(	LDFIRST	t0, FIRST(0)(src),	l_exc)
-EXC(	LDFIRST	t1, FIRST(1)(src),	l_exc_copy)
-	SUB     len, len, 4*NBYTES
+EXC(	LDFIRST t0, FIRST(0)(src),	l_exc)
+EXC(	LDFIRST t1, FIRST(1)(src),	l_exc_copy)
+	SUB	len, len, 4*NBYTES
 EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
 EXC(	LDREST	t1, REST(1)(src),	l_exc_copy)
-EXC(	LDFIRST	t2, FIRST(2)(src),	l_exc_copy)
-EXC(	LDFIRST	t3, FIRST(3)(src),	l_exc_copy)
+EXC(	LDFIRST t2, FIRST(2)(src),	l_exc_copy)
+EXC(	LDFIRST t3, FIRST(3)(src),	l_exc_copy)
 EXC(	LDREST	t2, REST(2)(src),	l_exc_copy)
 EXC(	LDREST	t3, REST(3)(src),	l_exc_copy)
 	ADD	src, src, 4*NBYTES

arch/mips/cavium-octeon/octeon-platform.c

@@ -410,7 +410,7 @@ int __init octeon_prune_device_tree(void)
 	pip_path = fdt_getprop(initial_boot_params, aliases, "pip", NULL);
 	if (pip_path) {
 		int pip = fdt_path_offset(initial_boot_params, pip_path);
-		if (pip  >= 0)
+		if (pip	 >= 0)
 			for (i = 0; i <= 4; i++)
 				octeon_fdt_pip_iface(pip, i, &mac_addr_base);
 	}

arch/mips/cavium-octeon/octeon_3xxx.dts

@@ -3,7 +3,7 @@
  * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
  *
  * This device tree is pruned and patched by early boot code before
- * use.  Because of this, it contains a super-set of the available
+ * use.	 Because of this, it contains a super-set of the available
  * devices and properties.
  */
 / {
@@ -433,12 +433,12 @@
 				cavium,t-we   = <45>;
 				cavium,t-rd-hld = <35>;
 				cavium,t-wr-hld = <45>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <0>;
-				cavium,t-page   = <35>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <0>;
+				cavium,t-page	= <35>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <8>;
 			};
 			cavium,cs-config@4 {
@@ -450,12 +450,12 @@
 				cavium,t-we   = <320>;
 				cavium,t-rd-hld = <320>;
 				cavium,t-wr-hld = <320>;
-				cavium,t-pause  = <320>;
-				cavium,t-wait   = <320>;
-				cavium,t-page   = <320>;
+				cavium,t-pause	= <320>;
+				cavium,t-wait	= <320>;
+				cavium,t-page	= <320>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <8>;
 			};
 			cavium,cs-config@5 {
@@ -467,12 +467,12 @@
 				cavium,t-we   = <150>;
 				cavium,t-rd-hld = <100>;
 				cavium,t-wr-hld = <30>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <30>;
-				cavium,t-page   = <320>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <30>;
+				cavium,t-page	= <320>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <16>;
 			};
 			cavium,cs-config@6 {
@@ -484,12 +484,12 @@
 				cavium,t-we   = <150>;
 				cavium,t-rd-hld = <100>;
 				cavium,t-wr-hld = <70>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <0>;
-				cavium,t-page   = <320>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <0>;
+				cavium,t-page	= <320>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,wait-mode;
 				cavium,bus-width = <16>;
 			};

arch/mips/cavium-octeon/octeon_68xx.dts

@@ -3,7 +3,7 @@
  * OCTEON 68XX device tree skeleton.
  *
  * This device tree is pruned and patched by early boot code before
- * use.  Because of this, it contains a super-set of the available
+ * use.	 Because of this, it contains a super-set of the available
  * devices and properties.
  */
 / {
@@ -469,12 +469,12 @@
 				cavium,t-we   = <35>;
 				cavium,t-rd-hld = <25>;
 				cavium,t-wr-hld = <35>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <300>;
-				cavium,t-page   = <25>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <300>;
+				cavium,t-page	= <25>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <8>;
 			};
 			cavium,cs-config@4 {
@@ -486,12 +486,12 @@
 				cavium,t-we   = <320>;
 				cavium,t-rd-hld = <320>;
 				cavium,t-wr-hld = <320>;
-				cavium,t-pause  = <320>;
-				cavium,t-wait   = <320>;
-				cavium,t-page   = <320>;
+				cavium,t-pause	= <320>;
+				cavium,t-wait	= <320>;
+				cavium,t-page	= <320>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <8>;
 			};
 			cavium,cs-config@5 {
@@ -503,12 +503,12 @@
 				cavium,t-we   = <150>;
 				cavium,t-rd-hld = <100>;
 				cavium,t-wr-hld = <300>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <300>;
-				cavium,t-page   = <310>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <300>;
+				cavium,t-page	= <310>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <16>;
 			};
 			cavium,cs-config@6 {
@@ -520,12 +520,12 @@
 				cavium,t-we   = <150>;
 				cavium,t-rd-hld = <100>;
 				cavium,t-wr-hld = <30>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <30>;
-				cavium,t-page   = <310>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <30>;
+				cavium,t-page	= <310>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,wait-mode;
 				cavium,bus-width = <16>;
 			};

arch/mips/cavium-octeon/octeon_boot.h

@@ -31,7 +31,7 @@ struct boot_init_vector {
 	uint32_t k0_val;
 	/* Address of boot info block structure */
 	uint64_t boot_info_addr;
-	uint32_t flags;         /* flags */
+	uint32_t flags;		/* flags */
 	uint32_t pad;
 };
 
@@ -53,20 +53,20 @@ struct linux_app_boot_info {
 
 /* If not to copy a lot of bootloader's structures
    here is only offset of requested member */
-#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK    0x765c
+#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK	 0x765c
 
 /* hardcoded in bootloader */
-#define  LABI_ADDR_IN_BOOTLOADER                         0x700
+#define	 LABI_ADDR_IN_BOOTLOADER			 0x700
 
 #define LINUX_APP_BOOT_BLOCK_NAME "linux-app-boot"
 
 #define LABI_SIGNATURE 0xAABBCC01
 
 /*  from uboot-headers/octeon_mem_map.h */
-#define EXCEPTION_BASE_INCR     (4 * 1024)
+#define EXCEPTION_BASE_INCR	(4 * 1024)
 			       /* Increment size for exception base addresses (4k minimum) */
-#define EXCEPTION_BASE_BASE     0
-#define BOOTLOADER_PRIV_DATA_BASE       (EXCEPTION_BASE_BASE + 0x800)
-#define BOOTLOADER_BOOT_VECTOR          (BOOTLOADER_PRIV_DATA_BASE)
+#define EXCEPTION_BASE_BASE	0
+#define BOOTLOADER_PRIV_DATA_BASE	(EXCEPTION_BASE_BASE + 0x800)
+#define BOOTLOADER_BOOT_VECTOR		(BOOTLOADER_PRIV_DATA_BASE)
 
 #endif /* __OCTEON_BOOT_H__ */

arch/mips/cavium-octeon/setup.c

@@ -319,7 +319,7 @@ EXPORT_SYMBOL(octeon_get_io_clock_rate);
  * exists on most Cavium evaluation boards. If it doesn't exist, then
  * this function doesn't do anything.
  *
- * @s:      String to write
+ * @s:	    String to write
  */
 void octeon_write_lcd(const char *s)
 {
@@ -341,7 +341,7 @@ void octeon_write_lcd(const char *s)
 /**
  * Return the console uart passed by the bootloader
  *
- * Returns uart   (0 or 1)
+ * Returns uart	  (0 or 1)
  */
 int octeon_get_boot_uart(void)
 {
@@ -805,7 +805,7 @@ void __init prom_init(void)
 			/*
 			 * To do: switch parsing to new style, something like:
 			 * parse_crashkernel(arg, sysinfo->system_dram_size,
-			 * 		  &crashk_size, &crashk_base);
+			 *		  &crashk_size, &crashk_base);
 			 */
 #endif
 		} else if (strlen(arcs_cmdline) + strlen(arg) + 1 <
@@ -1013,7 +1013,7 @@ void __init plat_mem_setup(void)
 }
 
 /*
- * Emit one character to the boot UART.  Exported for use by the
+ * Emit one character to the boot UART.	 Exported for use by the
  * watchdog timer.
  */
 int prom_putchar(char c)

arch/mips/cavium-octeon/smp.c

@@ -55,7 +55,7 @@ static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
 
 /**
  * Cause the function described by call_data to be executed on the passed
- * cpu.  When the function has finished, increment the finished field of
+ * cpu.	 When the function has finished, increment the finished field of
  * call_data.
  */
 void octeon_send_ipi_single(int cpu, unsigned int action)
@@ -126,8 +126,8 @@ static void octeon_smp_setup(void)
 
 #ifdef CONFIG_HOTPLUG_CPU
 	/*
-	 * The possible CPUs are all those present on the chip.  We
-	 * will assign CPU numbers for possible cores as well.  Cores
+	 * The possible CPUs are all those present on the chip.	 We
+	 * will assign CPU numbers for possible cores as well.	Cores
 	 * are always consecutively numberd from 0.
 	 */
 	for (id = 0; id < num_cores && id < NR_CPUS; id++) {
@@ -332,7 +332,7 @@ extern void kernel_entry(unsigned long arg1, ...);
 
 static void start_after_reset(void)
 {
-	kernel_entry(0, 0, 0);  /* set a2 = 0 for secondary core */
+	kernel_entry(0, 0, 0);	/* set a2 = 0 for secondary core */
 }
 
 static int octeon_update_boot_vector(unsigned int cpu)
@@ -401,7 +401,7 @@ static int __cpuinit register_cavium_notifier(void)
 }
 late_initcall(register_cavium_notifier);
 
-#endif  /* CONFIG_HOTPLUG_CPU */
+#endif	/* CONFIG_HOTPLUG_CPU */
 
 struct plat_smp_ops octeon_smp_ops = {
 	.send_ipi_single	= octeon_send_ipi_single,

arch/mips/cobalt/led.c

@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LED platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2007	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by

arch/mips/cobalt/mtd.c

@@ -25,7 +25,7 @@
 static struct mtd_partition cobalt_mtd_partitions[] = {
 	{
 		.name	= "firmware",
-		.offset	= 0x0,
+		.offset = 0x0,
 		.size	= 0x80000,
 	},
 };

arch/mips/cobalt/rtc.c

@@ -46,7 +46,7 @@ static __init int cobalt_rtc_add(void)
 		return -ENOMEM;
 
 	retval = platform_device_add_resources(pdev, cobalt_rtc_resource,
-	                                       ARRAY_SIZE(cobalt_rtc_resource));
+					       ARRAY_SIZE(cobalt_rtc_resource));
 	if (retval)
 		goto err_free_device;
 

arch/mips/dec/int-handler.S

@@ -55,70 +55,70 @@
  * DS2100/3100's, aka kn01, aka Pmax:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        SCSI
- *             3        Lance Ethernet
- *             4        DZ11 serial
- *             5        RTC
- *             6        Memory Controller & Video
- *             7        FPU
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	SCSI
+ *	       3	Lance Ethernet
+ *	       4	DZ11 serial
+ *	       5	RTC
+ *	       6	Memory Controller & Video
+ *	       7	FPU
  *
  * DS5000/200, aka kn02, aka 3max:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        TurboChannel
- *             3        RTC
- *             4        Reserved
- *             5        Memory Controller
- *             6        Reserved
- *             7        FPU
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	TurboChannel
+ *	       3	RTC
+ *	       4	Reserved
+ *	       5	Memory Controller
+ *	       6	Reserved
+ *	       7	FPU
  *
  * DS5000/1xx's, aka kn02ba, aka 3min:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        TurboChannel Slot 0
- *             3        TurboChannel Slot 1
- *             4        TurboChannel Slot 2
- *             5        TurboChannel Slot 3 (ASIC)
- *             6        Halt button
- *             7        FPU/R4k timer
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	TurboChannel Slot 0
+ *	       3	TurboChannel Slot 1
+ *	       4	TurboChannel Slot 2
+ *	       5	TurboChannel Slot 3 (ASIC)
+ *	       6	Halt button
+ *	       7	FPU/R4k timer
  *
  * DS5000/2x's, aka kn02ca, aka maxine:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Periodic Interrupt (100usec)
- *             3        RTC
- *             4        I/O write timeout
- *             5        TurboChannel (ASIC)
- *             6        Halt Keycode from Access.Bus keyboard (CTRL-ALT-ENTER)
- *             7        FPU/R4k timer
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	Periodic Interrupt (100usec)
+ *	       3	RTC
+ *	       4	I/O write timeout
+ *	       5	TurboChannel (ASIC)
+ *	       6	Halt Keycode from Access.Bus keyboard (CTRL-ALT-ENTER)
+ *	       7	FPU/R4k timer
  *
  * DS5000/2xx's, aka kn03, aka 3maxplus:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        System Board (ASIC)
- *             3        RTC
- *             4        Reserved
- *             5        Memory
- *             6        Halt Button
- *             7        FPU/R4k timer
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	System Board (ASIC)
+ *	       3	RTC
+ *	       4	Reserved
+ *	       5	Memory
+ *	       6	Halt Button
+ *	       7	FPU/R4k timer
  *
  * We handle the IRQ according to _our_ priority (see setup.c),
- * then we just return.  If multiple IRQs are pending then we will
+ * then we just return.	 If multiple IRQs are pending then we will
  * just take another exception, big deal.
  */
 		.align	5
@@ -146,7 +146,7 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA	t1,cpu_mask_nr_tbl
+		 PTR_LA t1,cpu_mask_nr_tbl
 1:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -195,7 +195,7 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA	t1,asic_mask_nr_tbl
+		 PTR_LA t1,asic_mask_nr_tbl
 2:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -221,7 +221,7 @@
 		FEXPORT(cpu_all_int)		# HALT, timers, software junk
 		li	a0,DEC_CPU_IRQ_BASE
 		srl	t0,CAUSEB_IP
-		li	t1,CAUSEF_IP>>CAUSEB_IP	# mask
+		li	t1,CAUSEF_IP>>CAUSEB_IP # mask
 		b	1f
 		 li	t2,4			# nr of bits / 2
 

arch/mips/dec/kn02xa-berr.c

@@ -128,8 +128,8 @@ void __init dec_kn02xa_be_init(void)
 {
 	volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
 
-        /* For KN04 we need to make sure EE (?) is enabled in the MB.  */
-        if (current_cpu_type() == CPU_R4000SC)
+	/* For KN04 we need to make sure EE (?) is enabled in the MB.  */
+	if (current_cpu_type() == CPU_R4000SC)
 		*mbcs |= KN4K_MB_CSR_EE;
 	fast_iob();
 

arch/mips/dec/prom/call_o32.S

@@ -14,7 +14,7 @@
 
 /* Maximum number of arguments supported.  Must be even!  */
 #define O32_ARGC	32
-/* Number of static registers we save.  */
+/* Number of static registers we save.	*/
 #define O32_STATC	11
 /* Frame size for both of the above.  */
 #define O32_FRAMESZ	(4 * O32_ARGC + SZREG * O32_STATC)

arch/mips/dec/prom/dectypes.h

@@ -1,5 +1,5 @@
 #ifndef DECTYPES
-#define	DECTYPES
+#define DECTYPES
 
 #define DS2100_3100	1	/* DS2100/3100	Pmax		*/
 #define DS5000_200	2	/* DS5000/200	3max		*/

arch/mips/dec/prom/init.c

@@ -103,7 +103,7 @@ void __init prom_init(void)
 	if (prom_is_rex(magic))
 		rex_clear_cache();
 
-	/* Register the early console.  */
+	/* Register the early console.	*/
 	register_prom_console();
 
 	/* Were we compiled with the right CPU option? */

arch/mips/dec/prom/memory.c

@@ -22,7 +22,7 @@ volatile unsigned long mem_err;		/* So we know an error occurred */
 
 /*
  * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen
- * off the end of real memory.  Only suitable for the 2100/3100's (PMAX).
+ * off the end of real memory.	Only suitable for the 2100/3100's (PMAX).
  */
 
 #define CHUNK_SIZE 0x400000

arch/mips/dec/setup.c

@@ -65,7 +65,7 @@ EXPORT_SYMBOL(ioasic_base);
 /*
  * IRQ routing and priority tables.  Priorites are set as follows:
  *
- * 		KN01	KN230	KN02	KN02-BA	KN02-CA	KN03
+ *		KN01	KN230	KN02	KN02-BA KN02-CA KN03
  *
  * MEMORY	CPU	CPU	CPU	ASIC	CPU	CPU
  * RTC		CPU	CPU	CPU	ASIC	CPU	CPU
@@ -413,7 +413,7 @@ static void __init dec_init_kn02(void)
 
 /*
  * Machine-specific initialisation for KN02-BA, aka DS5000/1xx
- * (xx = 20, 25, 33), aka 3min.  Also applies to KN04(-BA), aka
+ * (xx = 20, 25, 33), aka 3min.	 Also applies to KN04(-BA), aka
  * DS5000/150, aka 4min.
  */
 static int kn02ba_interrupt[DEC_NR_INTS] __initdata = {

arch/mips/dec/wbflush.c

@@ -2,9 +2,9 @@
  * Setup the right wbflush routine for the different DECstations.
  *
  * Created with information from:
- *      DECstation 3100 Desktop Workstation Functional Specification
- *      DECstation 5000/200 KN02 System Module Functional Specification
- *      mipsel-linux-objdump --disassemble vmunix | grep "wbflush" :-)
+ *	DECstation 3100 Desktop Workstation Functional Specification
+ *	DECstation 5000/200 KN02 System Module Functional Specification
+ *	mipsel-linux-objdump --disassemble vmunix | grep "wbflush" :-)
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive

arch/mips/emma/markeins/irq.c

@@ -292,7 +292,7 @@ void __init arch_init_irq(void)
 
 asmlinkage void plat_irq_dispatch(void)
 {
-        unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & STATUSF_IP7)
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);

arch/mips/emma/markeins/platform.c

@@ -190,7 +190,7 @@ static struct platform_device markeins_flash_device = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-        	.platform_data  = &markeins_flash_data,
+		.platform_data	= &markeins_flash_data,
 	},
 	.num_resources	= 1,
 	.resource	= &markeins_flash_resource,

arch/mips/emma/markeins/setup.c

@@ -28,7 +28,7 @@
 
 #include <asm/emma/emma2rh.h>
 
-#define	USE_CPU_COUNTER_TIMER	/* whether we use cpu counter */
+#define USE_CPU_COUNTER_TIMER	/* whether we use cpu counter */
 
 extern void markeins_led(const char *);
 

arch/mips/fw/arc/file.c

@@ -15,7 +15,7 @@
 
 LONG
 ArcGetDirectoryEntry(ULONG FileID, struct linux_vdirent *Buffer,
-                     ULONG N, ULONG *Count)
+		     ULONG N, ULONG *Count)
 {
 	return ARC_CALL4(get_vdirent, FileID, Buffer, N, Count);
 }
@@ -69,7 +69,7 @@ ArcGetFileInformation(ULONG FileID, struct linux_finfo *Information)
 }
 
 LONG ArcSetFileInformation(ULONG FileID, ULONG AttributeFlags,
-                           ULONG AttributeMask)
+			   ULONG AttributeMask)
 {
 	return ARC_CALL3(set_finfo, FileID, AttributeFlags, AttributeMask);
 }

arch/mips/fw/arc/identify.c

@@ -100,7 +100,7 @@ void __init prom_identify_arch(void)
 	if (p == NULL) {
 #ifdef CONFIG_SGI_IP27
 		/* IP27 PROM misbehaves, seems to not implement ARC
-		   GetChild().  So we just assume it's an IP27.  */
+		   GetChild().	So we just assume it's an IP27.	 */
 		iname = "SGI-IP27";
 #else
 		iname = "Unknown";

arch/mips/fw/arc/memory.c

@@ -1,6 +1,6 @@
 /*
  * memory.c: PROM library functions for acquiring/using memory descriptors
- *           given to us from the ARCS firmware.
+ *	     given to us from the ARCS firmware.
  *
  * Copyright (C) 1996 by David S. Miller
  * Copyright (C) 1999, 2000, 2001 by Ralf Baechle

arch/mips/fw/arc/promlib.c

@@ -11,7 +11,7 @@
 #include <asm/bcache.h>
 
 /*
- * IP22 boardcache is not compatible with board caches.  Thus we disable it
+ * IP22 boardcache is not compatible with board caches.	 Thus we disable it
  * during romvec action.  Since r4xx0.c is always compiled and linked with your
  * kernel, this shouldn't cause any harm regardless what MIPS processor you
  * have.

arch/mips/fw/lib/call_o32.S

@@ -14,7 +14,7 @@
 
 /* Maximum number of arguments supported.  Must be even!  */
 #define O32_ARGC	32
-/* Number of static registers we save.  */
+/* Number of static registers we save.	*/
 #define O32_STATC	11
 /* Frame size for static register  */
 #define O32_FRAMESZ	(SZREG * O32_STATC)

arch/mips/fw/sni/sniprom.c

@@ -28,20 +28,20 @@
  * registers
  */
 #define PROM_GET_MEMCONF	58
-#define PROM_GET_HWCONF         61
+#define PROM_GET_HWCONF		61
 
 #define PROM_VEC		(u64 *)CKSEG1ADDR(0x1fc00000)
 #define PROM_ENTRY(x)		(PROM_VEC + (x))
 
-#define ___prom_putchar         ((int *(*)(int))PROM_ENTRY(PROM_PUTCHAR))
-#define ___prom_getenv          ((char *(*)(char *))PROM_ENTRY(PROM_GETENV))
-#define ___prom_get_memconf     ((void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF))
-#define ___prom_get_hwconf      ((u32 (*)(void))PROM_ENTRY(PROM_GET_HWCONF))
+#define ___prom_putchar		((int *(*)(int))PROM_ENTRY(PROM_PUTCHAR))
+#define ___prom_getenv		((char *(*)(char *))PROM_ENTRY(PROM_GETENV))
+#define ___prom_get_memconf	((void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF))
+#define ___prom_get_hwconf	((u32 (*)(void))PROM_ENTRY(PROM_GET_HWCONF))
 
 #ifdef CONFIG_64BIT
 
 static u8 o32_stk[16384];
-#define O32_STK   &o32_stk[sizeof(o32_stk)]
+#define O32_STK	  &o32_stk[sizeof(o32_stk)]
 
 #define __PROM_O32(fun, arg) fun arg __asm__(#fun); \
 				     __asm__(#fun " = call_o32")
@@ -52,13 +52,13 @@ void  __PROM_O32(__prom_get_memconf, (void (*)(void *), void *, void *));
 u32   __PROM_O32(__prom_get_hwconf, (u32 (*)(void), void *));
 
 #define _prom_putchar(x)     __prom_putchar(___prom_putchar, O32_STK, x)
-#define _prom_getenv(x)      __prom_getenv(___prom_getenv, O32_STK, x)
+#define _prom_getenv(x)	     __prom_getenv(___prom_getenv, O32_STK, x)
 #define _prom_get_memconf(x) __prom_get_memconf(___prom_get_memconf, O32_STK, x)
 #define _prom_get_hwconf()   __prom_get_hwconf(___prom_get_hwconf, O32_STK)
 
 #else
 #define _prom_putchar(x)     ___prom_putchar(x)
-#define _prom_getenv(x)      ___prom_getenv(x)
+#define _prom_getenv(x)	     ___prom_getenv(x)
 #define _prom_get_memconf(x) ___prom_get_memconf(x)
 #define _prom_get_hwconf(x)  ___prom_get_hwconf(x)
 #endif

arch/mips/include/asm/abi.h

@@ -14,12 +14,12 @@
 
 struct mips_abi {
 	int (* const setup_frame)(void *sig_return, struct k_sigaction *ka,
-	                          struct pt_regs *regs, int signr,
-	                          sigset_t *set);
+				  struct pt_regs *regs, int signr,
+				  sigset_t *set);
 	const unsigned long	signal_return_offset;
 	int (* const setup_rt_frame)(void *sig_return, struct k_sigaction *ka,
-	                       struct pt_regs *regs, int signr,
-	                       sigset_t *set, siginfo_t *info);
+			       struct pt_regs *regs, int signr,
+			       sigset_t *set, siginfo_t *info);
 	const unsigned long	rt_signal_return_offset;
 	const unsigned long	restart;
 };

arch/mips/include/asm/addrspace.h

@@ -51,14 +51,14 @@
  * Returns the physical address of a CKSEGx / XKPHYS address
  */
 #define CPHYSADDR(a)		((_ACAST32_(a)) & 0x1fffffff)
-#define XPHYSADDR(a)            ((_ACAST64_(a)) &			\
+#define XPHYSADDR(a)		((_ACAST64_(a)) &			\
 				 _CONST64_(0x000000ffffffffff))
 
 #ifdef CONFIG_64BIT
 
 /*
  * Memory segments (64bit kernel mode addresses)
- * The compatibility segments use the full 64-bit sign extended value.  Note
+ * The compatibility segments use the full 64-bit sign extended value.	Note
  * the R8000 doesn't have them so don't reference these in generic MIPS code.
  */
 #define XKUSEG			_CONST64_(0x0000000000000000)
@@ -131,7 +131,7 @@
 
 /*
  * The ultimate limited of the 64-bit MIPS architecture:  2 bits for selecting
- * the region, 3 bits for the CCA mode.  This leaves 59 bits of which the
+ * the region, 3 bits for the CCA mode.	 This leaves 59 bits of which the
  * R8000 implements most with its 48-bit physical address space.
  */
 #define TO_PHYS_MASK	_CONST64_(0x07ffffffffffffff)	/* 2^^59 - 1 */

arch/mips/include/asm/asm.h

@@ -33,12 +33,12 @@
  * Not used for the kernel but here seems to be the right place.
  */
 #ifdef __PIC__
-#define CPRESTORE(register)                             \
+#define CPRESTORE(register)				\
 		.cprestore register
-#define CPADD(register)                                 \
+#define CPADD(register)					\
 		.cpadd	register
-#define CPLOAD(register)                                \
-		.cpload	register
+#define CPLOAD(register)				\
+		.cpload register
 #else
 #define CPRESTORE(register)
 #define CPADD(register)
@@ -48,35 +48,35 @@
 /*
  * LEAF - declare leaf routine
  */
-#define	LEAF(symbol)                                    \
-		.globl	symbol;                         \
-		.align	2;                              \
-		.type	symbol, @function;              \
-		.ent	symbol, 0;                      \
+#define LEAF(symbol)					\
+		.globl	symbol;				\
+		.align	2;				\
+		.type	symbol, @function;		\
+		.ent	symbol, 0;			\
 symbol:		.frame	sp, 0, ra
 
 /*
  * NESTED - declare nested routine entry point
  */
-#define	NESTED(symbol, framesize, rpc)                  \
-		.globl	symbol;                         \
-		.align	2;                              \
-		.type	symbol, @function;              \
-		.ent	symbol, 0;                       \
+#define NESTED(symbol, framesize, rpc)			\
+		.globl	symbol;				\
+		.align	2;				\
+		.type	symbol, @function;		\
+		.ent	symbol, 0;			 \
 symbol:		.frame	sp, framesize, rpc
 
 /*
  * END - mark end of function
  */
-#define	END(function)                                   \
-		.end	function;		        \
+#define END(function)					\
+		.end	function;			\
 		.size	function, .-function
 
 /*
  * EXPORT - export definition of symbol
  */
 #define EXPORT(symbol)					\
-		.globl	symbol;                         \
+		.globl	symbol;				\
 symbol:
 
 /*
@@ -90,16 +90,16 @@ symbol:
 /*
  * ABS - export absolute symbol
  */
-#define	ABS(symbol,value)                               \
-		.globl	symbol;                         \
+#define ABS(symbol,value)				\
+		.globl	symbol;				\
 symbol		=	value
 
-#define	PANIC(msg)                                      \
+#define PANIC(msg)					\
 		.set	push;				\
-		.set	reorder;                        \
-		PTR_LA	a0, 8f;                          \
-		jal	panic;                          \
-9:		b	9b;                             \
+		.set	reorder;			\
+		PTR_LA	a0, 8f;				 \
+		jal	panic;				\
+9:		b	9b;				\
 		.set	pop;				\
 		TEXT(msg)
 
@@ -107,31 +107,31 @@ symbol		=	value
  * Print formatted string
  */
 #ifdef CONFIG_PRINTK
-#define PRINT(string)                                   \
+#define PRINT(string)					\
 		.set	push;				\
-		.set	reorder;                        \
-		PTR_LA	a0, 8f;                          \
-		jal	printk;                         \
+		.set	reorder;			\
+		PTR_LA	a0, 8f;				 \
+		jal	printk;				\
 		.set	pop;				\
 		TEXT(string)
 #else
 #define PRINT(string)
 #endif
 
-#define	TEXT(msg)                                       \
+#define TEXT(msg)					\
 		.pushsection .data;			\
-8:		.asciiz	msg;                            \
+8:		.asciiz msg;				\
 		.popsection;
 
 /*
  * Build text tables
  */
-#define TTABLE(string)                                  \
+#define TTABLE(string)					\
 		.pushsection .text;			\
-		.word	1f;                             \
+		.word	1f;				\
 		.popsection				\
 		.pushsection .data;			\
-1:		.asciiz	string;                         \
+1:		.asciiz string;				\
 		.popsection
 
 /*
@@ -143,13 +143,13 @@ symbol		=	value
  */
 #ifdef CONFIG_CPU_HAS_PREFETCH
 
-#define PREF(hint,addr)                                 \
+#define PREF(hint,addr)					\
 		.set	push;				\
 		.set	mips4;				\
 		pref	hint, addr;			\
 		.set	pop
 
-#define PREFX(hint,addr)                                \
+#define PREFX(hint,addr)				\
 		.set	push;				\
 		.set	mips4;				\
 		prefx	hint, addr;			\
@@ -166,42 +166,42 @@ symbol		=	value
  * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
  */
 #if (_MIPS_ISA == _MIPS_ISA_MIPS1)
-#define MOVN(rd, rs, rt)                                \
+#define MOVN(rd, rs, rt)				\
 		.set	push;				\
 		.set	reorder;			\
-		beqz	rt, 9f;                         \
-		move	rd, rs;                         \
+		beqz	rt, 9f;				\
+		move	rd, rs;				\
 		.set	pop;				\
 9:
-#define MOVZ(rd, rs, rt)                                \
+#define MOVZ(rd, rs, rt)				\
 		.set	push;				\
 		.set	reorder;			\
-		bnez	rt, 9f;                         \
-		move	rd, rs;                         \
+		bnez	rt, 9f;				\
+		move	rd, rs;				\
 		.set	pop;				\
 9:
 #endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
 #if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
-#define MOVN(rd, rs, rt)                                \
+#define MOVN(rd, rs, rt)				\
 		.set	push;				\
 		.set	noreorder;			\
-		bnezl	rt, 9f;                         \
-		 move	rd, rs;                         \
+		bnezl	rt, 9f;				\
+		 move	rd, rs;				\
 		.set	pop;				\
 9:
-#define MOVZ(rd, rs, rt)                                \
+#define MOVZ(rd, rs, rt)				\
 		.set	push;				\
 		.set	noreorder;			\
-		beqzl	rt, 9f;                         \
-		 move	rd, rs;                         \
+		beqzl	rt, 9f;				\
+		 move	rd, rs;				\
 		.set	pop;				\
 9:
 #endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
 #if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
     (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
-#define MOVN(rd, rs, rt)                                \
+#define MOVN(rd, rs, rt)				\
 		movn	rd, rs, rt
-#define MOVZ(rd, rs, rt)                                \
+#define MOVZ(rd, rs, rt)				\
 		movz	rd, rs, rt
 #endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
 

arch/mips/include/asm/atomic.h

@@ -1,5 +1,5 @@
 /*
- * Atomic operations that C can't guarantee us.  Useful for
+ * Atomic operations that C can't guarantee us.	 Useful for
  * resource counting etc..
  *
  * But use these as seldom as possible since they are much more slower
@@ -21,7 +21,7 @@
 #include <asm/cmpxchg.h>
 #include <asm/war.h>
 
-#define ATOMIC_INIT(i)    { (i) }
+#define ATOMIC_INIT(i)	  { (i) }
 
 /*
  * atomic_read - read atomic variable

arch/mips/include/asm/barrier.h

@@ -18,7 +18,7 @@
  * over this barrier.  All reads preceding this primitive are guaranteed
  * to access memory (but not necessarily other CPUs' caches) before any
  * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
+ * any of the preceding reads.	This primitive is much lighter weight than
  * rmb() on most CPUs, and is never heavier weight than is
  * rmb().
  *
@@ -43,7 +43,7 @@
  * </programlisting>
  *
  * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
+ * two reads are separated by a read_barrier_depends().	 However,
  * the following code, with the same initial values for "a" and "b":
  *
  * <programlisting>
@@ -57,7 +57,7 @@
  * </programlisting>
  *
  * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * the read of "a" and the read of "b".	 Therefore, on some CPUs, such
  * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
  * in cases like this where there are no data dependencies.
  */
@@ -92,7 +92,7 @@
 		: "memory")
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 # define OCTEON_SYNCW_STR	".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n"
-# define __syncw() 	__asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory")
+# define __syncw()	__asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory")
 
 # define fast_wmb()	__syncw()
 # define fast_rmb()	barrier()
@@ -158,7 +158,7 @@
 #endif
 
 #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
-#define __WEAK_LLSC_MB		"       sync	\n"
+#define __WEAK_LLSC_MB		"	sync	\n"
 #else
 #define __WEAK_LLSC_MB		"		\n"
 #endif

arch/mips/include/asm/bcache.h

@@ -11,7 +11,7 @@
 
 
 /* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent,
-   chipset implemented caches.  On machines with other CPUs the CPU does the
+   chipset implemented caches.	On machines with other CPUs the CPU does the
    cache thing itself. */
 struct bcache_ops {
 	void (*bc_enable)(void);

arch/mips/include/asm/bitops.h

@@ -26,15 +26,15 @@
 #define SZLONG_MASK 31UL
 #define __LL		"ll	"
 #define __SC		"sc	"
-#define __INS		"ins    "
-#define __EXT		"ext    "
+#define __INS		"ins	"
+#define __EXT		"ext	"
 #elif _MIPS_SZLONG == 64
 #define SZLONG_LOG 6
 #define SZLONG_MASK 63UL
 #define __LL		"lld	"
 #define __SC		"scd	"
-#define __INS		"dins    "
-#define __EXT		"dext    "
+#define __INS		"dins	 "
+#define __EXT		"dext	 "
 #endif
 
 /*
@@ -357,7 +357,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
 		"	or	%2, %0, %3				\n"
 		"	xor	%2, %3					\n"
-		"	" __SC 	"%2, %1					\n"
+		"	" __SC	"%2, %1					\n"
 		"	beqzl	%2, 1b					\n"
 		"	and	%2, %0, %3				\n"
 		"	.set	mips0					\n"
@@ -371,10 +371,10 @@ static inline int test_and_clear_bit(unsigned long nr,
 
 		do {
 			__asm__ __volatile__(
-			"	" __LL	"%0, %1	# test_and_clear_bit	\n"
+			"	" __LL	"%0, %1 # test_and_clear_bit	\n"
 			"	" __EXT "%2, %0, %3, 1			\n"
-			"	" __INS	"%0, $0, %3, 1			\n"
-			"	" __SC 	"%0, %1				\n"
+			"	" __INS "%0, $0, %3, 1			\n"
+			"	" __SC	"%0, %1				\n"
 			: "=&r" (temp), "+m" (*m), "=&r" (res)
 			: "ir" (bit)
 			: "memory");
@@ -387,10 +387,10 @@ static inline int test_and_clear_bit(unsigned long nr,
 		do {
 			__asm__ __volatile__(
 			"	.set	mips3				\n"
-			"	" __LL	"%0, %1	# test_and_clear_bit	\n"
+			"	" __LL	"%0, %1 # test_and_clear_bit	\n"
 			"	or	%2, %0, %3			\n"
 			"	xor	%2, %3				\n"
-			"	" __SC 	"%2, %1				\n"
+			"	" __SC	"%2, %1				\n"
 			"	.set	mips0				\n"
 			: "=&r" (temp), "+m" (*m), "=&r" (res)
 			: "r" (1UL << bit)
@@ -444,7 +444,7 @@ static inline int test_and_change_bit(unsigned long nr,
 		do {
 			__asm__ __volatile__(
 			"	.set	mips3				\n"
-			"	" __LL	"%0, %1	# test_and_change_bit	\n"
+			"	" __LL	"%0, %1 # test_and_change_bit	\n"
 			"	xor	%2, %0, %3			\n"
 			"	" __SC	"\t%2, %1			\n"
 			"	.set	mips0				\n"

arch/mips/include/asm/bootinfo.h

@@ -44,19 +44,19 @@
 /*
  * Valid machtype for group PMC-MSP
  */
-#define MACH_MSP4200_EVAL       0	/* PMC-Sierra MSP4200 Evaluation */
-#define MACH_MSP4200_GW         1	/* PMC-Sierra MSP4200 Gateway demo */
-#define MACH_MSP4200_FPGA       2	/* PMC-Sierra MSP4200 Emulation */
-#define MACH_MSP7120_EVAL       3	/* PMC-Sierra MSP7120 Evaluation */
-#define MACH_MSP7120_GW         4	/* PMC-Sierra MSP7120 Residential GW */
-#define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
-#define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
+#define MACH_MSP4200_EVAL	0	/* PMC-Sierra MSP4200 Evaluation */
+#define MACH_MSP4200_GW		1	/* PMC-Sierra MSP4200 Gateway demo */
+#define MACH_MSP4200_FPGA	2	/* PMC-Sierra MSP4200 Emulation */
+#define MACH_MSP7120_EVAL	3	/* PMC-Sierra MSP7120 Evaluation */
+#define MACH_MSP7120_GW		4	/* PMC-Sierra MSP7120 Residential GW */
+#define MACH_MSP7120_FPGA	5	/* PMC-Sierra MSP7120 Emulation */
+#define MACH_MSP_OTHER	      255	/* PMC-Sierra unknown board type */
 
 /*
  * Valid machtype for group Mikrotik
  */
-#define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
-#define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
+#define MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532	*/
+#define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A	*/
 
 /*
  * Valid machtype for Loongson family
@@ -67,7 +67,7 @@
 #define MACH_LEMOTE_ML2F7      3
 #define MACH_LEMOTE_YL2F89     4
 #define MACH_DEXXON_GDIUM2F10  5
-#define MACH_LEMOTE_NAS        6
+#define MACH_LEMOTE_NAS	       6
 #define MACH_LEMOTE_LL2F       7
 #define MACH_LOONGSON_END      8
 

arch/mips/include/asm/cacheops.h

@@ -8,20 +8,20 @@
  * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
  * (C) Copyright 1999 Silicon Graphics, Inc.
  */
-#ifndef	__ASM_CACHEOPS_H
-#define	__ASM_CACHEOPS_H
+#ifndef __ASM_CACHEOPS_H
+#define __ASM_CACHEOPS_H
 
 /*
  * Cache Operations available on all MIPS processors with R4000-style caches
  */
-#define Index_Invalidate_I      0x00
-#define Index_Writeback_Inv_D   0x01
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D	0x01
 #define Index_Load_Tag_I	0x04
 #define Index_Load_Tag_D	0x05
 #define Index_Store_Tag_I	0x08
 #define Index_Store_Tag_D	0x09
 #if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I    	0x00
+#define Hit_Invalidate_I	0x00
 #else
 #define Hit_Invalidate_I	0x10
 #endif
@@ -39,8 +39,8 @@
 /*
  * R4000SC and R4400SC-specific cacheops
  */
-#define Index_Invalidate_SI     0x02
-#define Index_Writeback_Inv_SD  0x03
+#define Index_Invalidate_SI	0x02
+#define Index_Writeback_Inv_SD	0x03
 #define Index_Load_Tag_SI	0x06
 #define Index_Load_Tag_SD	0x07
 #define Index_Store_Tag_SI	0x0A

arch/mips/include/asm/checksum.h

@@ -194,7 +194,7 @@ static inline __sum16 ip_compute_csum(const void *buff, int len)
 
 #define _HAVE_ARCH_IPV6_CSUM
 static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-				          const struct in6_addr *daddr,
+					  const struct in6_addr *daddr,
 					  __u32 len, unsigned short proto,
 					  __wsum sum)
 {

arch/mips/include/asm/cmpxchg.h

@@ -146,7 +146,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
 		"	.set	mips3				\n"	\
-		"1:	" ld "	%0, %2		# __cmpxchg_asm	\n"	\
+		"1:	" ld "	%0, %2		# __cmpxchg_asm \n"	\
 		"	bne	%0, %z3, 2f			\n"	\
 		"	.set	mips0				\n"	\
 		"	move	$1, %z4				\n"	\
@@ -163,7 +163,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
 		"	.set	mips3				\n"	\
-		"1:	" ld "	%0, %2		# __cmpxchg_asm	\n"	\
+		"1:	" ld "	%0, %2		# __cmpxchg_asm \n"	\
 		"	bne	%0, %z3, 2f			\n"	\
 		"	.set	mips0				\n"	\
 		"	move	$1, %z4				\n"	\
@@ -205,7 +205,7 @@ extern void __cmpxchg_called_with_bad_pointer(void);
 									\
 	switch (sizeof(*(__ptr))) {					\
 	case 4:								\
-		__res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new);	\
+		__res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \
 		break;							\
 	case 8:								\
 		if (sizeof(long) == 8) {				\

arch/mips/include/asm/compat-signal.h

@@ -18,9 +18,9 @@ static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d,
 	BUG_ON(sizeof(*d) != sizeof(*s));
 	BUG_ON(_NSIG_WORDS != 2);
 
-	err  = __put_user(s->sig[0],       &d->sig[0]);
+	err  = __put_user(s->sig[0],	   &d->sig[0]);
 	err |= __put_user(s->sig[0] >> 32, &d->sig[1]);
-	err |= __put_user(s->sig[1],       &d->sig[2]);
+	err |= __put_user(s->sig[1],	   &d->sig[2]);
 	err |= __put_user(s->sig[1] >> 32, &d->sig[3]);
 
 	return err;

arch/mips/include/asm/compat.h

@@ -120,7 +120,7 @@ struct compat_statfs {
 
 typedef u32		compat_old_sigset_t;	/* at least 32 bits */
 
-#define _COMPAT_NSIG		128		/* Don't ask !$@#% ...  */
+#define _COMPAT_NSIG		128		/* Don't ask !$@#% ...	*/
 #define _COMPAT_NSIG_BPW	32
 
 typedef u32		compat_sigset_word;
@@ -168,7 +168,7 @@ typedef struct compat_siginfo {
 			s32 _addr; /* faulting insn/memory ref. */
 		} _sigfault;
 
-		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		/* SIGPOLL, SIGXFSZ (To do ...)	 */
 		struct {
 			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
 			int _fd;
@@ -179,7 +179,7 @@ typedef struct compat_siginfo {
 			timer_t _tid;		/* timer id */
 			int _overrun;		/* overrun count */
 			compat_sigval_t _sigval;/* same as below */
-			int _sys_private;       /* not to be passed to user */
+			int _sys_private;	/* not to be passed to user */
 		} _timer;
 
 		/* POSIX.1b signals */

arch/mips/include/asm/cpu-features.h

@@ -14,7 +14,7 @@
 #include <cpu-feature-overrides.h>
 
 #ifndef current_cpu_type
-#define current_cpu_type()      current_cpu_data.cputype
+#define current_cpu_type()	current_cpu_data.cputype
 #endif
 
 /*
@@ -87,10 +87,10 @@
 #define cpu_has_mips16		(cpu_data[0].ases & MIPS_ASE_MIPS16)
 #endif
 #ifndef cpu_has_mdmx
-#define cpu_has_mdmx           (cpu_data[0].ases & MIPS_ASE_MDMX)
+#define cpu_has_mdmx	       (cpu_data[0].ases & MIPS_ASE_MDMX)
 #endif
 #ifndef cpu_has_mips3d
-#define cpu_has_mips3d         (cpu_data[0].ases & MIPS_ASE_MIPS3D)
+#define cpu_has_mips3d	       (cpu_data[0].ases & MIPS_ASE_MIPS3D)
 #endif
 #ifndef cpu_has_smartmips
 #define cpu_has_smartmips      (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
@@ -108,11 +108,11 @@
 #define cpu_has_ic_fills_f_dc	(cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
 #endif
 #ifndef cpu_has_pindexed_dcache
-#define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
 #endif
 
 /*
- * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
+ * I-Cache snoops remote store.	 This only matters on SMP.  Some multiprocessors
  * such as the R10000 have I-Caches that snoop local stores; the embedded ones
  * don't.  For maintaining I-cache coherency this means we need to flush the
  * D-cache all the way back to whever the I-cache does refills from, so the
@@ -148,8 +148,8 @@
  */
 #define cpu_has_mips32	(cpu_has_mips32r1 | cpu_has_mips32r2)
 #define cpu_has_mips64	(cpu_has_mips64r1 | cpu_has_mips64r2)
-#define cpu_has_mips_r1	(cpu_has_mips32r1 | cpu_has_mips64r1)
-#define cpu_has_mips_r2	(cpu_has_mips32r2 | cpu_has_mips64r2)
+#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1)
+#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2)
 #define cpu_has_mips_r	(cpu_has_mips32r1 | cpu_has_mips32r2 | \
 			 cpu_has_mips64r1 | cpu_has_mips64r2)
 
@@ -159,7 +159,7 @@
 
 /*
  * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
- * pre-MIPS32/MIPS53 processors have CLO, CLZ.  The IDT RC64574 is 64-bit and
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ.	The IDT RC64574 is 64-bit and
  * has CLO and CLZ but not DCLO nor DCLZ.  For 64-bit kernels
  * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
  */
@@ -191,7 +191,7 @@
 # define cpu_has_64bits		(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
 # endif
 # ifndef cpu_has_64bit_zero_reg
-# define cpu_has_64bit_zero_reg	(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# define cpu_has_64bit_zero_reg (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
 # endif
 # ifndef cpu_has_64bit_gp_regs
 # define cpu_has_64bit_gp_regs		0

arch/mips/include/asm/cpu-info.h

@@ -52,14 +52,14 @@ struct cpuinfo_mips {
 	unsigned int		cputype;
 	int			isa_level;
 	int			tlbsize;
-	struct cache_desc	icache;	/* Primary I-cache */
-	struct cache_desc	dcache;	/* Primary D or combined I/D cache */
-	struct cache_desc	scache;	/* Secondary cache */
-	struct cache_desc	tcache;	/* Tertiary/split secondary cache */
-	int			srsets;	/* Shadow register sets */
+	struct cache_desc	icache; /* Primary I-cache */
+	struct cache_desc	dcache; /* Primary D or combined I/D cache */
+	struct cache_desc	scache; /* Secondary cache */
+	struct cache_desc	tcache; /* Tertiary/split secondary cache */
+	int			srsets; /* Shadow register sets */
 	int			core;	/* physical core number */
 #ifdef CONFIG_64BIT
-	int			vmbits;	/* Virtual memory size in bits */
+	int			vmbits; /* Virtual memory size in bits */
 #endif
 #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
 	/*
@@ -68,12 +68,12 @@ struct cpuinfo_mips {
 	 * exception resources, ASID spaces, etc, are common
 	 * to all TCs within the same VPE.
 	 */
-	int			vpe_id;  /* Virtual Processor number */
+	int			vpe_id;	 /* Virtual Processor number */
 #endif
 #ifdef CONFIG_MIPS_MT_SMTC
-	int			tc_id;   /* Thread Context number */
+	int			tc_id;	 /* Thread Context number */
 #endif
-	void 			*data;	/* Additional data */
+	void			*data;	/* Additional data */
 	unsigned int		watch_reg_count;   /* Number that exist */
 	unsigned int		watch_reg_use_cnt; /* Usable by ptrace */
 #define NUM_WATCH_REGS 4

arch/mips/include/asm/cpu.h

@@ -1,6 +1,6 @@
 /*
  * cpu.h: Values of the PRId register used to match up
- *        various MIPS cpu types.
+ *	  various MIPS cpu types.
  *
  * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
  * Copyright (C) 2004  Maciej W. Rozycki
@@ -9,14 +9,14 @@
 #define _ASM_CPU_H
 
 /* Assigned Company values for bits 23:16 of the PRId Register
-   (CP0 register 15, select 0).  As of the MIPS32 and MIPS64 specs from
+   (CP0 register 15, select 0).	 As of the MIPS32 and MIPS64 specs from
    MTI, the PRId register is defined in this (backwards compatible)
    way:
 
   +----------------+----------------+----------------+----------------+
-  | Company Options| Company ID     | Processor ID   | Revision       |
+  | Company Options| Company ID	    | Processor ID   | Revision	      |
   +----------------+----------------+----------------+----------------+
-   31            24 23            16 15             8 7
+   31		 24 23		  16 15		    8 7
 
    I don't have docs for all the previous processors, but my impression is
    that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64
@@ -29,7 +29,7 @@
 #define PRID_COMP_ALCHEMY	0x030000
 #define PRID_COMP_SIBYTE	0x040000
 #define PRID_COMP_SANDCRAFT	0x050000
-#define PRID_COMP_NXP   	0x060000
+#define PRID_COMP_NXP		0x060000
 #define PRID_COMP_TOSHIBA	0x070000
 #define PRID_COMP_LSI		0x080000
 #define PRID_COMP_LEXRA		0x0b0000
@@ -38,9 +38,9 @@
 #define PRID_COMP_INGENIC	0xd00000
 
 /*
- * Assigned values for the product ID register.  In order to detect a
+ * Assigned values for the product ID register.	 In order to detect a
  * certain CPU type exactly eventually additional registers may need to
- * be examined.  These are valid when 23:16 == PRID_COMP_LEGACY
+ * be examined.	 These are valid when 23:16 == PRID_COMP_LEGACY
  */
 #define PRID_IMP_R2000		0x0100
 #define PRID_IMP_AU1_REV1	0x0100
@@ -101,14 +101,14 @@
  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
  */
 
-#define PRID_IMP_SB1            0x0100
-#define PRID_IMP_SB1A           0x1100
+#define PRID_IMP_SB1		0x0100
+#define PRID_IMP_SB1A		0x1100
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT
  */
 
-#define PRID_IMP_SR71000        0x0400
+#define PRID_IMP_SR71000	0x0400
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
@@ -145,7 +145,7 @@
  * These are the PRID's for when 23:16 == PRID_COMP_INGENIC
  */
 
-#define PRID_IMP_JZRISC        0x0200
+#define PRID_IMP_JZRISC	       0x0200
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC
@@ -188,9 +188,9 @@
 #define PRID_REV_R3000A		0x0030
 #define PRID_REV_R3000		0x0020
 #define PRID_REV_R2000A		0x0010
-#define PRID_REV_TX3912 	0x0010
-#define PRID_REV_TX3922 	0x0030
-#define PRID_REV_TX3927 	0x0040
+#define PRID_REV_TX3912		0x0010
+#define PRID_REV_TX3922		0x0030
+#define PRID_REV_TX3927		0x0040
 #define PRID_REV_VR4111		0x0050
 #define PRID_REV_VR4181		0x0050	/* Same as VR4111 */
 #define PRID_REV_VR4121		0x0060
@@ -217,9 +217,9 @@
  * FPU implementation/revision register (CP1 control register 0).
  *
  * +---------------------------------+----------------+----------------+
- * | 0                               | Implementation | Revision       |
+ * | 0				     | Implementation | Revision       |
  * +---------------------------------+----------------+----------------+
- *  31                             16 15             8 7              0
+ *  31				   16 15	     8 7	      0
  */
 
 #define FPIR_IMP_NONE		0x0000

arch/mips/include/asm/dec/ioasic_addrs.h

@@ -25,22 +25,22 @@
  */
 #define IOASIC_SYS_ROM	(0*IOASIC_SLOT_SIZE)	/* system board ROM */
 #define IOASIC_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */
-#define IOASIC_ESAR 	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
-#define IOASIC_LANCE 	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
-#define IOASIC_SCC0 	(4*IOASIC_SLOT_SIZE)	/* SCC #0 */
+#define IOASIC_ESAR	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
+#define IOASIC_LANCE	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
+#define IOASIC_SCC0	(4*IOASIC_SLOT_SIZE)	/* SCC #0 */
 #define IOASIC_VDAC_HI	(5*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
-#define IOASIC_SCC1 	(6*IOASIC_SLOT_SIZE)	/* SCC #1 (3min, 3max+) */
+#define IOASIC_SCC1	(6*IOASIC_SLOT_SIZE)	/* SCC #1 (3min, 3max+) */
 #define IOASIC_VDAC_LO	(7*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
-#define IOASIC_TOY 	(8*IOASIC_SLOT_SIZE)	/* RTC */
-#define IOASIC_ISDN 	(9*IOASIC_SLOT_SIZE)	/* ISDN (maxine) */
+#define IOASIC_TOY	(8*IOASIC_SLOT_SIZE)	/* RTC */
+#define IOASIC_ISDN	(9*IOASIC_SLOT_SIZE)	/* ISDN (maxine) */
 #define IOASIC_ERRADDR	(9*IOASIC_SLOT_SIZE)	/* bus error address (3max+) */
-#define IOASIC_CHKSYN 	(10*IOASIC_SLOT_SIZE)	/* ECC syndrome (3max+) */
+#define IOASIC_CHKSYN	(10*IOASIC_SLOT_SIZE)	/* ECC syndrome (3max+) */
 #define IOASIC_ACC_BUS	(10*IOASIC_SLOT_SIZE)	/* ACCESS.bus (maxine) */
-#define IOASIC_MCR 	(11*IOASIC_SLOT_SIZE)	/* memory control (3max+) */
-#define IOASIC_FLOPPY 	(11*IOASIC_SLOT_SIZE)	/* FDC (maxine) */
-#define IOASIC_SCSI 	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
+#define IOASIC_MCR	(11*IOASIC_SLOT_SIZE)	/* memory control (3max+) */
+#define IOASIC_FLOPPY	(11*IOASIC_SLOT_SIZE)	/* FDC (maxine) */
+#define IOASIC_SCSI	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
 #define IOASIC_FDC_DMA	(13*IOASIC_SLOT_SIZE)	/* FDC DMA (maxine) */
-#define IOASIC_SCSI_DMA	(14*IOASIC_SLOT_SIZE)	/* ??? */
+#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE)	/* ??? */
 #define IOASIC_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
 
 

arch/mips/include/asm/dec/kn01.h

@@ -57,12 +57,12 @@
 /*
  * System Control & Status Register bits.
  */
-#define KN01_CSR_MNFMOD		(1<<15)	/* MNFMOD manufacturing jumper */
-#define KN01_CSR_STATUS		(1<<14)	/* self-test result status output */
-#define KN01_CSR_PARDIS		(1<<13)	/* parity error disable */
-#define KN01_CSR_CRSRTST	(1<<12)	/* PCC test output */
-#define KN01_CSR_MONO		(1<<11)	/* mono/color fb SIMM installed */
-#define KN01_CSR_MEMERR		(1<<10)	/* write timeout error status & ack*/
+#define KN01_CSR_MNFMOD		(1<<15) /* MNFMOD manufacturing jumper */
+#define KN01_CSR_STATUS		(1<<14) /* self-test result status output */
+#define KN01_CSR_PARDIS		(1<<13) /* parity error disable */
+#define KN01_CSR_CRSRTST	(1<<12) /* PCC test output */
+#define KN01_CSR_MONO		(1<<11) /* mono/color fb SIMM installed */
+#define KN01_CSR_MEMERR		(1<<10) /* write timeout error status & ack*/
 #define KN01_CSR_VINT		(1<<9)	/* PCC area detect #2 status & ack */
 #define KN01_CSR_TXDIS		(1<<8)	/* DZ11 transmit disable */
 #define KN01_CSR_VBGTRG		(1<<2)	/* blue DAC voltage over green (r/o) */

arch/mips/include/asm/dec/kn02ca.h

@@ -68,7 +68,7 @@
 #define KN03CA_IO_SSR_ISDN_RST	(1<<12)		/* ~ISDN (Am79C30A) reset */
 
 #define KN03CA_IO_SSR_FLOPPY_RST (1<<7)		/* ~FDC (82077) reset */
-#define KN03CA_IO_SSR_VIDEO_RST	(1<<6)		/* ~framebuffer reset */
+#define KN03CA_IO_SSR_VIDEO_RST (1<<6)		/* ~framebuffer reset */
 #define KN03CA_IO_SSR_AB_RST	(1<<5)		/* ACCESS.bus reset */
 #define KN03CA_IO_SSR_RES_4	(1<<4)		/* unused */
 #define KN03CA_IO_SSR_RES_3	(1<<4)		/* unused */

arch/mips/include/asm/dec/prom.h

@@ -49,7 +49,7 @@
 
 #ifdef CONFIG_64BIT
 
-#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.  */
+#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.	 */
 
 #else /* !CONFIG_64BIT */