[SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user)

Fixes bug where max_concurr_spinup oem parameter should be
overriden by max_concurr_spinup user parameter. Override should
happen only when max_concurr_spinup user parameter is specified
in command line (greater than 0). Also this fix shortens variables
representing max_conxurr_spinup for oem and user parameters.

Signed-off-by: Andrzej Jakowski <andrzej.jakowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/isci/host.c

@@ -1350,7 +1350,7 @@ static void isci_user_parameters_get(struct sci_user_parameters *u)
 	u->stp_max_occupancy_timeout = stp_max_occ_to;
 	u->ssp_max_occupancy_timeout = ssp_max_occ_to;
 	u->no_outbound_task_timeout = no_outbound_task_to;
-	u->max_number_concurrent_device_spin_up = max_concurr_spinup;
+	u->max_concurr_spinup = max_concurr_spinup;
 }
 
 static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm)
@@ -1661,7 +1661,7 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost
 	ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
 
 	/* Default to APC mode. */
-	ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1;
+	ihost->oem_parameters.controller.max_concurr_spin_up = 1;
 
 	/* Default to no SSC operation. */
 	ihost->oem_parameters.controller.do_enable_ssc = false;
@@ -1787,7 +1787,8 @@ int sci_oem_parameters_validate(struct sci_oem_params *oem)
 	} else
 		return -EINVAL;
 
-	if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
+	if (oem->controller.max_concurr_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT ||
+	    oem->controller.max_concurr_spin_up < 1)
 		return -EINVAL;
 
 	return 0;
@@ -1810,6 +1811,16 @@ static enum sci_status sci_oem_parameters_set(struct isci_host *ihost)
 	return SCI_FAILURE_INVALID_STATE;
 }
 
+static u8 max_spin_up(struct isci_host *ihost)
+{
+	if (ihost->user_parameters.max_concurr_spinup)
+		return min_t(u8, ihost->user_parameters.max_concurr_spinup,
+			     MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+	else
+		return min_t(u8, ihost->oem_parameters.controller.max_concurr_spin_up,
+			     MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+}
+
 static void power_control_timeout(unsigned long data)
 {
 	struct sci_timer *tmr = (struct sci_timer *)data;
@@ -1839,8 +1850,7 @@ static void power_control_timeout(unsigned long data)
 		if (iphy == NULL)
 			continue;
 
-		if (ihost->power_control.phys_granted_power >=
-		    ihost->oem_parameters.controller.max_concurrent_dev_spin_up)
+		if (ihost->power_control.phys_granted_power >= max_spin_up(ihost))
 			break;
 
 		ihost->power_control.requesters[i] = NULL;
@@ -1865,8 +1875,7 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost,
 {
 	BUG_ON(iphy == NULL);
 
-	if (ihost->power_control.phys_granted_power <
-	    ihost->oem_parameters.controller.max_concurrent_dev_spin_up) {
+	if (ihost->power_control.phys_granted_power < max_spin_up(ihost)) {
 		ihost->power_control.phys_granted_power++;
 		sci_phy_consume_power_handler(iphy);
 

drivers/scsi/isci/init.c

@@ -118,7 +118,7 @@ unsigned char phy_gen = 3;
 module_param(phy_gen, byte, 0);
 MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
 
-unsigned char max_concurr_spinup = 1;
+unsigned char max_concurr_spinup;
 module_param(max_concurr_spinup, byte, 0);
 MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
 

drivers/scsi/isci/probe_roms.h

@@ -112,7 +112,7 @@ struct sci_user_parameters {
 	 * This field specifies the maximum number of direct attached devices
 	 * that can have power supplied to them simultaneously.
 	 */
-	u8 max_number_concurrent_device_spin_up;
+	u8 max_concurr_spinup;
 
 	/**
 	 * This field specifies the number of seconds to allow a phy to consume
@@ -219,7 +219,7 @@ struct sci_bios_oem_param_block_hdr {
 struct sci_oem_params {
 	struct {
 		uint8_t mode_type;
-		uint8_t max_concurrent_dev_spin_up;
+		uint8_t max_concurr_spin_up;
 		uint8_t do_enable_ssc;
 		uint8_t reserved;
 	} controller;