Staging: rt3070: remove dead EXT_BUILD_CHANNEL_LIST code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt3070/common/cmm_info.c

@@ -259,10 +259,6 @@ INT Set_CountryRegion_Proc(
 
 	region = simple_strtol(arg, 0, 10);
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-	return -EOPNOTSUPP;
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 	// Country can be set only when EEPROM not programmed
 	if (pAd->CommonCfg.CountryRegion & 0x80)
 	{
@@ -309,10 +305,6 @@ INT Set_CountryRegionABand_Proc(
 
 	region = simple_strtol(arg, 0, 10);
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-	return -EOPNOTSUPP;
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 	// Country can be set only when EEPROM not programmed
 	if (pAd->CommonCfg.CountryRegionForABand & 0x80)
 	{
@@ -1178,11 +1170,8 @@ VOID	RTMPSetPhyMode(
 	pAd->CommonCfg.PhyMode = (UCHAR)phymode;
 
 	DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel));
-#ifdef EXT_BUILD_CHANNEL_LIST
-	BuildChannelListEx(pAd);
-#else
+
 	BuildChannelList(pAd);
-#endif // EXT_BUILD_CHANNEL_LIST //
 
 	// sanity check user setting
 	for (i = 0; i < pAd->ChannelListNum; i++)

drivers/staging/rt3070/common/cmm_sanity.c

@@ -749,15 +749,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                     *LengthVIE += (pEid->Len + 2);
                 }
                 break;
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-			case IE_COUNTRY:
-				Ptr = (PUCHAR) pVIE;
-                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
-                *LengthVIE += (pEid->Len + 2);
-				break;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
+
             default:
                 break;
         }

drivers/staging/rt3070/common/mlme.c

@@ -3653,11 +3653,9 @@ VOID BssEntrySet(
 
 		NdisZeroMemory(&pBss->WpaIE.IE[0], MAX_CUSTOM_LEN);
 		NdisZeroMemory(&pBss->RsnIE.IE[0], MAX_CUSTOM_LEN);
-#ifdef EXT_BUILD_CHANNEL_LIST
-		NdisZeroMemory(&pBss->CountryString[0], 3);
-		pBss->bHasCountryIE = FALSE;
-#endif // EXT_BUILD_CHANNEL_LIST //
+
 		pEid = (PEID_STRUCT) pVIE;
+
 		while ((Length + 2 + (USHORT)pEid->Len) <= LengthVIE)
 		{
 			switch(pEid->Eid)
@@ -3686,12 +3684,6 @@ VOID BssEntrySet(
 						NdisMoveMemory(pBss->RsnIE.IE, pEid, pBss->RsnIE.IELen);
 			}
 				break;
-#ifdef EXT_BUILD_CHANNEL_LIST
-				case IE_COUNTRY:
-					NdisMoveMemory(&pBss->CountryString[0], pEid->Octet, 3);
-					pBss->bHasCountryIE = TRUE;
-					break;
-#endif // EXT_BUILD_CHANNEL_LIST //
             }
 			Length = Length + 2 + (USHORT)pEid->Len;  // Eid[1] + Len[1]+ content[Len]
 			pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
@@ -3938,18 +3930,6 @@ VOID BssTableSsidSort(
 			(SSID_EQUAL(Ssid, SsidLen, pInBss->Ssid, pInBss->SsidLen) || bIsHiddenApIncluded))
 		{
 			BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
-
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-			// If no Country IE exists no Connection will be established when IEEE80211dClientMode is strict.
-			if ((pAd->StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict) &&
-				(pInBss->bHasCountryIE == FALSE))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict, but this AP doesn't have country IE.\n"));
-				continue;
-			}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 #ifdef DOT11_N_SUPPORT
 			// 2.4G/5G N only mode
 			if ((pInBss->HtCapabilityLen == 0) &&

drivers/staging/rt3070/common/rtmp_init.c

@@ -3396,10 +3396,6 @@ VOID	UserCfgInit(
 		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
 	}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	pAd->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-#endif // EXT_BUILD_CHANNEL_LIST //
 #endif // CONFIG_STA_SUPPORT //
 
 	// global variables mXXXX used in MAC protocol state machines

drivers/staging/rt3070/mlme.h

@@ -1179,10 +1179,6 @@ typedef struct {
 #ifdef CONFIG_STA_SUPPORT
     WPA_IE_     WpaIE;
     WPA_IE_     RsnIE;
-#ifdef EXT_BUILD_CHANNEL_LIST
-	UCHAR		CountryString[3];
-	BOOLEAN		bHasCountryIE;
-#endif // EXT_BUILD_CHANNEL_LIST //
 #endif // CONFIG_STA_SUPPORT //
 } BSS_ENTRY, *PBSS_ENTRY;
 

drivers/staging/rt3070/rt_profile.c

@@ -950,12 +950,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 					if(RTMPGetKeyParameter("CountryCode", tmpbuf, 25, buffer))
 					{
 						NdisMoveMemory(pAd->CommonCfg.CountryCode, tmpbuf , 2);
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							NdisMoveMemory(pAd->StaCfg.StaOriCountryCode, tmpbuf , 2);
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
+
 						if (strlen(pAd->CommonCfg.CountryCode) != 0)
 						{
 							pAd->CommonCfg.bCountryFlag = TRUE;
@@ -971,12 +966,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 							pAd->CommonCfg.Geography = Geography;
 							pAd->CommonCfg.CountryCode[2] =
 								(pAd->CommonCfg.Geography == BOTH) ? ' ' : ((pAd->CommonCfg.Geography == IDOR) ? 'I' : 'O');
-#ifdef CONFIG_STA_SUPPORT
-#ifdef EXT_BUILD_CHANNEL_LIST
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							pAd->StaCfg.StaOriGeography = pAd->CommonCfg.Geography;
-#endif // EXT_BUILD_CHANNEL_LIST //
-#endif // CONFIG_STA_SUPPORT //
 							DBGPRINT(RT_DEBUG_TRACE, ("ChannelGeography=%d\n", pAd->CommonCfg.Geography));
 						}
 					}

drivers/staging/rt3070/rtmp.h

@@ -2150,13 +2150,6 @@ typedef struct _STA_ADMIN_CONFIG {
 	DESIRED_TRANSMIT_SETTING       	DesiredTransmitSetting;
 	RT_HT_PHY_INFO					DesiredHtPhyInfo;
 	BOOLEAN							bAutoTxRateSwitch;
-
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-	UCHAR				IEEE80211dClientMode;
-	UCHAR				StaOriCountryCode[3];
-	UCHAR				StaOriGeography;
-#endif // EXT_BUILD_CHANNEL_LIST //
 } STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG;
 
 // This data structure keep the current active BSS/IBSS's configuration that this STA

drivers/staging/rt3070/sta/connect.c

@@ -1957,17 +1957,6 @@ VOID LinkDown(
 			NdisMoveMemory(pAd->StaCfg.CCXAdjacentAPSsid, pAd->CommonCfg.Ssid, pAd->StaCfg.CCXAdjacentAPSsidLen);
 			COPY_MAC_ADDR(pAd->StaCfg.CCXAdjacentAPBssid, pAd->CommonCfg.Bssid);
 		}
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-		// Country IE of the AP will be evaluated and will be used.
-		if (pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None)
-		{
-			NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pAd->StaCfg.StaOriCountryCode[0], 2);
-			pAd->CommonCfg.Geography = pAd->StaCfg.StaOriGeography;
-			BuildChannelListEx(pAd);
-		}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 	}
 
 	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)

drivers/staging/rt3070/sta/sync.c

@@ -328,22 +328,6 @@ VOID MlmeJoinReqAction(
 	pAd->MlmeAux.Channel = pBss->Channel;
 	pAd->MlmeAux.CentralChannel = pBss->CentralChannel;
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-	// Country IE of the AP will be evaluated and will be used.
-	if ((pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None) &&
-		(pBss->bHasCountryIE == TRUE))
-	{
-		NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pBss->CountryString[0], 2);
-		if (pBss->CountryString[2] == 'I')
-			pAd->CommonCfg.Geography = IDOR;
-		else if (pBss->CountryString[2] == 'O')
-			pAd->CommonCfg.Geography = ODOR;
-		else
-			pAd->CommonCfg.Geography = BOTH;
-		BuildChannelListEx(pAd);
-	}
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 	// Let BBP register at 20MHz to do scan
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
 	BBPValue &= (~0x18);

drivers/staging/rt3070/sta_ioctl.c

@@ -213,12 +213,6 @@ INT Set_ShortRetryLimit_Proc(
 	IN	PRTMP_ADAPTER	pAdapter,
 	IN	PUCHAR			arg);
 
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg);
-#endif // EXT_BUILD_CHANNEL_LIST //
-
 static struct {
 	CHAR *name;
 	INT (*set_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
@@ -287,9 +281,6 @@ static struct {
 #endif // DOT11_N_SUPPORT //
 	{"LongRetry",	        		Set_LongRetryLimit_Proc},
 	{"ShortRetry",	        		Set_ShortRetryLimit_Proc},
-#ifdef EXT_BUILD_CHANNEL_LIST
-	{"11dClientMode",				Set_Ieee80211dClientMode_Proc},
-#endif // EXT_BUILD_CHANNEL_LIST //
 //2008/09/11:KH add to support efuse<--
 #ifdef RT30xx
 	{"efuseFreeNumber",				set_eFuseGetFreeBlockCount_Proc},
@@ -5073,13 +5064,8 @@ INT RTMPQueryInformation(
 				UCHAR value;
 				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BUILD_CHANNEL_EX \n"));
 				wrq->u.data.length = sizeof(UCHAR);
-#ifdef EXT_BUILD_CHANNEL_LIST
-				DBGPRINT(RT_DEBUG_TRACE, ("Support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 1;
-#else
 				DBGPRINT(RT_DEBUG_TRACE, ("Doesn't support EXT_BUILD_CHANNEL_LIST.\n"));
 				value = 0;
-#endif // EXT_BUILD_CHANNEL_LIST //
 				Status = copy_to_user(wrq->u.data.pointer, &value, 1);
 				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
 			}
@@ -6870,22 +6856,3 @@ INT Set_ShortRetryLimit_Proc(
 	DBGPRINT(RT_DEBUG_TRACE, ("IF Set_ShortRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
 	return TRUE;
 }
-
-#ifdef EXT_BUILD_CHANNEL_LIST
-INT Set_Ieee80211dClientMode_Proc(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  PUCHAR          arg)
-{
-    if (simple_strtol(arg, 0, 10) == 0)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_None;
-    else if (simple_strtol(arg, 0, 10) == 1)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Flexible;
-    else if (simple_strtol(arg, 0, 10) == 2)
-        pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Strict;
-    else
-        return FALSE;
-
-    DBGPRINT(RT_DEBUG_TRACE, ("Set_Ieee802dMode_Proc::(IEEEE0211dMode=%d)\n", pAdapter->StaCfg.IEEE80211dClientMode));
-    return TRUE;
-}
-#endif // EXT_BUILD_CHANNEL_LIST //