Merge branch 'linus' into x86/iommu

Conflicts:
	lib/swiotlb.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/ABI/testing/sysfs-gpio

@@ -0,0 +1,26 @@
+What:		/sys/class/gpio/
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+  As a Kconfig option, individual GPIO signals may be accessed from
+  userspace.  GPIOs are only made available to userspace by an explicit
+  "export" operation.  If a given GPIO is not claimed for use by
+  kernel code, it may be exported by userspace (and unexported later).
+  Kernel code may export it for complete or partial access.
+
+  GPIOs are identified as they are inside the kernel, using integers in
+  the range 0..INT_MAX.  See Documentation/gpio.txt for more information.
+
+    /sys/class/gpio
+	/export ... asks the kernel to export a GPIO to userspace
+	/unexport ... to return a GPIO to the kernel
+	/gpioN ... for each exported GPIO #N
+	    /value ... always readable, writes fail for input GPIOs
+	    /direction ... r/w as: in, out (default low); write: high, low
+	/gpiochipN ... for each gpiochip; #N is its first GPIO
+	    /base ... (r/o) same as N
+	    /label ... (r/o) descriptive, not necessarily unique
+	    /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+

Documentation/cpusets.txt

@@ -635,14 +635,16 @@ prior 'mems' setting, will not be moved.
 
 There is an exception to the above.  If hotplug functionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
-then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs.  When memory
-hotplug functionality for removing Memory Nodes is available, a
-similar exception is expected to apply there as well.  In general,
-the kernel prefers to violate cpuset placement, over starving a task
-that has had all its allowed CPUs or Memory Nodes taken offline.  User
-code should reconfigure cpusets to only refer to online CPUs and Memory
-Nodes when using hotplug to add or remove such resources.
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus.  But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching.  In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs.  When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well.  In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.
 
 There is a second exception to the above.  GFP_ATOMIC requests are
 kernel internal allocations that must be satisfied, immediately.

Documentation/feature-removal-schedule.txt

@@ -322,3 +322,11 @@ Why:  Accounting can now be enabled/disabled without kernel recompilation.
       controlled by a kernel/module/sysfs/sysctl parameter.
 Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
 
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why:  The 2.6 kernel supports direct writing to ide CD drives, which
+      eliminates the need for ide-scsi. The new method is more
+      efficient in every way.
+Who:  FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

Documentation/filesystems/proc.txt

@@ -2413,6 +2413,8 @@ The following 4 memory types are supported:
   - (bit 1) anonymous shared memory
   - (bit 2) file-backed private memory
   - (bit 3) file-backed shared memory
+  - (bit 4) ELF header pages in file-backed private memory areas (it is
+            effective only if the bit 2 is cleared)
 
   Note that MMIO pages such as frame buffer are never dumped and vDSO pages
   are always dumped regardless of the bitmask status.

MAINTAINERS

@@ -4365,7 +4365,7 @@ S:	Maintained
 USB VIDEO CLASS
 P:	Laurent Pinchart
 M:	laurent.pinchart@skynet.be
-L:	linx-uvc-devel@berlios.de
+L:	linux-uvc-devel@lists.berlios.de
 L:	video4linux-list@redhat.com
 W:	http://linux-uvc.berlios.de
 S:	Maintained

arch/arm/include/asm/pci.h

@@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  * The networking and block device layers use this boolean for bounce
  * buffer decisions.
  */
-#define PCI_DMA_BUS_IS_PHYS     (0)
+#define PCI_DMA_BUS_IS_PHYS     (1)
 
 /*
  * Whether pci_unmap_{single,page} is a nop depends upon the

arch/arm/mach-mx3/pcm037.c

@@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = {
 };
 
 static struct imxuart_platform_data uart_pdata = {
-	.flags = 0,
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static struct platform_device *devices[] __initdata = {

arch/arm/mach-pxa/tosa.c

@@ -50,6 +50,7 @@
 #include <asm/mach/sharpsl_param.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long tosa_pin_config[] = {
@@ -521,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = {
 		.wakeup	= 1,
 		.active_low = 1,
 	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= TOSA_GPIO_EAR_IN,
+		.desc	= "HeadPhone insert",
+		.active_low = 1,
+		.debounce_interval = 300,
+	},
 };
 
 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
@@ -792,6 +801,8 @@ static void __init tosa_init(void)
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
+	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 

arch/arm/plat-omap/devices.c

@@ -21,6 +21,7 @@
 
 #include <mach/tc.h>
 #include <mach/board.h>
+#include <mach/mmc.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/menelaus.h>
@@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define	OMAP_MMC1_BASE		0x4809c000
-#define OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x1fc)
+#define	OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+
+#define	OMAP_MMC2_BASE		0x480b4000
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x1fc)
+#define	OMAP_MMC2_INT		INT_24XX_MMC2_IRQ
+
 #else
+
 #define	OMAP_MMC1_BASE		0xfffb7800
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x7f)
 #define OMAP_MMC1_INT		INT_MMC
-#endif
+
 #define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x7f)
+#define	OMAP_MMC2_INT		INT_1610_MMC2
 
-static struct omap_mmc_conf mmc1_conf;
+#endif
+
+static struct omap_mmc_platform_data mmc1_data;
 
 static u64 mmc1_dmamask = 0xffffffff;
 
 static struct resource mmc1_resources[] = {
 	{
 		.start		= OMAP_MMC1_BASE,
-		.end		= OMAP_MMC1_BASE + 0x7f,
+		.end		= OMAP_MMC1_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = {
 	.id		= 1,
 	.dev = {
 		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_conf,
+		.platform_data	= &mmc1_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 	.resource	= mmc1_resources,
 };
 
-#ifdef	CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
 
-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;
 
 static u64 mmc2_dmamask = 0xffffffff;
 
 static struct resource mmc2_resources[] = {
 	{
 		.start		= OMAP_MMC2_BASE,
-		.end		= OMAP_MMC2_BASE + 0x7f,
+		.end		= OMAP_MMC2_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_1610_MMC2,
+		.start		= OMAP_MMC2_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = {
 	.id		= 2,
 	.dev = {
 		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_conf,
+		.platform_data	= &mmc2_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc2_resources),
 	.resource	= mmc2_resources,
 };
 #endif
 
-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
 {
-	const struct omap_mmc_config	*mmc_conf;
-	const struct omap_mmc_conf	*mmc;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
+	if (cpu_is_omap2430() || cpu_is_omap34xx())
 		return;
 
-	/* block 1 is always available and has just one pinout option */
-	mmc = &mmc_conf->mmc[0];
-	if (mmc->enabled) {
+	if (mmc_conf->mmc[0].enabled) {
 		if (cpu_is_omap24xx()) {
 			omap_cfg_reg(H18_24XX_MMC_CMD);
 			omap_cfg_reg(H15_24XX_MMC_CLKI);
@@ -292,7 +300,7 @@ static void __init omap_init_mmc(void)
 				omap_cfg_reg(P20_1710_MMC_DATDIR0);
 			}
 		}
-		if (mmc->wire4) {
+		if (mmc_conf->mmc[0].wire4) {
 			if (cpu_is_omap24xx()) {
 				omap_cfg_reg(H14_24XX_MMC_DAT1);
 				omap_cfg_reg(E19_24XX_MMC_DAT2);
@@ -303,25 +311,35 @@ static void __init omap_init_mmc(void)
 			} else {
 				omap_cfg_reg(MMC_DAT1);
 				/* NOTE:  DAT2 can be on W10 (here) or M15 */
-				if (!mmc->nomux)
+				if (!mmc_conf->mmc[0].nomux)
 					omap_cfg_reg(MMC_DAT2);
 				omap_cfg_reg(MMC_DAT3);
 			}
 		}
-		mmc1_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device1);
+#if defined(CONFIG_ARCH_OMAP2420)
+		if (mmc_conf->mmc[0].internal_clock) {
+			/*
+			 * Use internal loop-back in MMC/SDIO
+			 * Module Input Clock selection
+			 */
+			if (cpu_is_omap24xx()) {
+				u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+				v |= (1 << 24); /* not used in 243x */
+				omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+			}
+		}
+#endif
 	}
 
 #ifdef	CONFIG_ARCH_OMAP16XX
 	/* block 2 is on newer chips, and has many pinout options */
-	mmc = &mmc_conf->mmc[1];
-	if (mmc->enabled) {
-		if (!mmc->nomux) {
+	if (mmc_conf->mmc[1].enabled) {
+		if (!mmc_conf->mmc[1].nomux) {
 			omap_cfg_reg(Y8_1610_MMC2_CMD);
 			omap_cfg_reg(Y10_1610_MMC2_CLK);
 			omap_cfg_reg(R18_1610_MMC2_CLKIN);
 			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc->wire4) {
+			if (mmc_conf->mmc[1].wire4) {
 				omap_cfg_reg(V8_1610_MMC2_DAT1);
 				omap_cfg_reg(W15_1610_MMC2_DAT2);
 				omap_cfg_reg(R10_1610_MMC2_DAT3);
@@ -337,14 +355,55 @@ static void __init omap_init_mmc(void)
 		if (cpu_is_omap1710())
 			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
 				     MOD_CONF_CTRL_1);
-		mmc2_conf = *mmc;
+	}
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+	const struct omap_mmc_config	*mmc_conf;
+
+	/* NOTE:  assumes MMC was never (wrongly) enabled */
+	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+	if (!mmc_conf)
+		return;
+
+	omap_init_mmc_conf(mmc_conf);
+
+	if (mmc_conf->mmc[0].enabled) {
+		mmc1_data.conf = mmc_conf->mmc[0];
+		(void) platform_device_register(&mmc_omap_device1);
+	}
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	if (mmc_conf->mmc[1].enabled) {
+		mmc2_data.conf = mmc_conf->mmc[1];
 		(void) platform_device_register(&mmc_omap_device2);
 	}
 #endif
-	return;
 }
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+	switch (host) {
+	case 1:
+		mmc1_data = *info;
+		break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	case 2:
+		mmc2_data = *info;
+		break;
+#endif
+	default:
+		BUG();
+	}
+}
+
 #else
 static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
 #endif
 
 /*-------------------------------------------------------------------------*/

arch/ia64/include/asm/elf.h

@@ -266,4 +266,19 @@ do {									\
 	}								\
 } while (0)
 
+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+	uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+	uint64_t ip;
+	uint64_t gp;
+};
+
 #endif /* _ASM_IA64_ELF_H */

arch/ia64/include/asm/sections.h

@@ -6,6 +6,8 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
+#include <linux/elf.h>
+#include <linux/uaccess.h>
 #include <asm-generic/sections.h>
 
 extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
@@ -22,7 +24,16 @@ extern char __start_unwind[], __end_unwind[];
 extern char __start_ivt_text[], __end_ivt_text[];
 
 #undef dereference_function_descriptor
-void *dereference_function_descriptor(void *);
+static inline void *dereference_function_descriptor(void *ptr)
+{
+	struct fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->ip, p))
+		ptr = p;
+	return ptr;
+}
+
 
 #endif /* _ASM_IA64_SECTIONS_H */
 

arch/ia64/include/asm/sn/bte.h

@@ -223,10 +223,11 @@ extern void bte_error_handler(unsigned long);
  * until the transfer is complete.  In order to get the asynch
  * version of bte_copy, you must perform this check yourself.
  */
-#define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
-	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
-	  (dest & L1_CACHE_MASK)) ?                                     \
-	 bte_unaligned_copy(src, dest, len, mode) :              	\
+#define BTE_UNALIGNED_COPY(src, dest, len, mode)			\
+	(((len & (L1_CACHE_BYTES - 1)) ||				\
+	  (src & (L1_CACHE_BYTES - 1)) ||				\
+	  (dest & (L1_CACHE_BYTES - 1))) ?				\
+	 bte_unaligned_copy(src, dest, len, mode) :			\
 	 bte_copy(src, dest, len, mode, NULL))
 
 

arch/ia64/kernel/module.c

@@ -31,11 +31,9 @@
 #include <linux/elf.h>
 #include <linux/moduleloader.h>
 #include <linux/string.h>
-#include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 
 #include <asm/patch.h>
-#include <asm/sections.h>
 #include <asm/unaligned.h>
 
 #define ARCH_MODULE_DEBUG 0
@@ -137,15 +135,6 @@ static const char *reloc_name[256] = {
 
 #undef N
 
-struct got_entry {
-	uint64_t val;
-};
-
-struct fdesc {
-	uint64_t ip;
-	uint64_t gp;
-};
-
 /* Opaque struct for insns, to protect against derefs. */
 struct insn;
 
@@ -943,13 +932,3 @@ module_arch_cleanup (struct module *mod)
 	if (mod->arch.core_unw_table)
 		unw_remove_unwind_table(mod->arch.core_unw_table);
 }
-
-void *dereference_function_descriptor(void *ptr)
-{
-	struct fdesc *desc = ptr;
-	void *p;
-
-	if (!probe_kernel_address(&desc->ip, p))
-		ptr = p;
-	return ptr;
-}

arch/ia64/kernel/smpboot.c

@@ -741,16 +741,14 @@ int __cpu_disable(void)
 			return -EBUSY;
 	}
 
-	cpu_clear(cpu, cpu_online_map);
-
 	if (migrate_platform_irqs(cpu)) {
 		cpu_set(cpu, cpu_online_map);
 		return (-EBUSY);
 	}
 
 	remove_siblinginfo(cpu);
-	cpu_clear(cpu, cpu_online_map);
 	fixup_irqs();
+	cpu_clear(cpu, cpu_online_map);
 	local_flush_tlb_all();
 	cpu_clear(cpu, cpu_callin_map);
 	return 0;

arch/ia64/sn/pci/tioca_provider.c

@@ -420,8 +420,10 @@ tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size)
 		entry = find_next_zero_bit(map, mapsize, last_entry);
 	}
 
-	if (entry > mapsize)
+	if (entry > mapsize) {
+		kfree(ca_dmamap);
 		goto map_return;
+	}
 
 	for (i = 0; i < entries; i++)
 		set_bit(entry + i, map);

arch/m68k/configs/amiga_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -166,10 +172,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -183,6 +185,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -460,6 +466,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -470,6 +477,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -489,8 +497,6 @@ CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -556,6 +562,7 @@ CONFIG_A2091_SCSI=y
 CONFIG_GVP11_SCSI=y
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -564,7 +571,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -573,13 +580,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -722,6 +725,7 @@ CONFIG_INPUT_M68K_BEEP=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -757,6 +761,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -768,8 +773,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -844,10 +851,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND=m
@@ -861,6 +864,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -899,6 +903,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -958,6 +963,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -980,7 +986,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -989,7 +994,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1054,6 +1058,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1113,6 +1119,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1154,6 +1164,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/apollo_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -161,10 +167,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -178,6 +180,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -411,6 +414,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -430,7 +434,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -499,6 +506,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -532,7 +536,6 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -627,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -657,6 +661,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -738,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -753,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -789,6 +793,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -848,6 +853,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -860,18 +866,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -880,7 +885,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -944,6 +948,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1003,6 +1009,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1044,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/atari_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -409,6 +412,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -428,7 +432,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -452,6 +458,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -462,6 +469,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -479,8 +487,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_FALCON_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -530,6 +536,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ATARI_SCSI=y
 # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
 # CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -538,7 +545,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -547,13 +554,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -666,6 +669,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -782,10 +789,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND=m
@@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -806,11 +810,8 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
 
 #
 # File systems
@@ -820,8 +821,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -840,6 +843,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -899,6 +903,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -920,7 +925,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -929,7 +933,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -994,6 +997,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1053,6 +1058,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1094,6 +1103,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/bvme6000_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -759,6 +764,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -818,6 +824,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -830,18 +837,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -850,7 +856,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -915,6 +920,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -974,6 +981,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1015,6 +1026,7 @@ CONFIG_BITREVERSE=m
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=m
 # CONFIG_CRC7 is not set

arch/m68k/configs/hp300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -412,6 +415,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -431,7 +435,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -449,6 +455,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -500,6 +507,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -508,7 +516,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -517,13 +525,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -636,6 +640,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -666,6 +671,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -677,8 +683,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -747,10 +755,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -762,6 +766,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -796,6 +801,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -855,6 +861,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -867,18 +874,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -887,7 +893,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -951,6 +956,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1010,6 +1017,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1051,6 +1062,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/mac_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -460,6 +467,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,8 +485,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_MAC_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -527,6 +533,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MAC_SCSI=y
 CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -535,7 +542,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -544,9 +551,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@@ -559,7 +563,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -670,6 +673,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -784,10 +791,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -836,6 +840,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -895,6 +900,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -917,7 +923,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -926,7 +931,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -991,6 +995,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1050,6 +1056,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1091,6 +1101,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/multi_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,10 +179,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -190,6 +192,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -427,6 +430,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -446,7 +450,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -476,6 +482,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -486,6 +493,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -508,8 +516,6 @@ CONFIG_BLK_DEV_FALCON_IDE=y
 CONFIG_BLK_DEV_MAC_IDE=y
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -584,6 +590,7 @@ CONFIG_MVME147_SCSI=y
 CONFIG_MVME16x_SCSI=y
 CONFIG_BVME6000_SCSI=y
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -592,7 +599,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -601,9 +608,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@@ -616,7 +620,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -632,7 +635,6 @@ CONFIG_A2065=m
 CONFIG_HYDRA=m
 CONFIG_ZORRO8390=m
 CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
 CONFIG_MAC8390=y
 CONFIG_MAC89x0=m
 CONFIG_MACSONIC=m
@@ -791,6 +793,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -827,6 +830,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -838,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -923,10 +929,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND_PAULA=m
@@ -942,6 +944,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -949,8 +952,6 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
@@ -972,8 +973,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -992,6 +995,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1051,6 +1055,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1063,18 +1068,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1083,7 +1087,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1152,6 +1155,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1211,6 +1216,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1252,6 +1261,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/mvme147_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -502,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -510,7 +518,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -519,13 +527,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -630,6 +634,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -660,6 +665,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -671,8 +677,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -707,10 +715,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -722,6 +726,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -758,6 +763,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -817,6 +823,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -829,18 +836,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -849,7 +855,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -914,6 +919,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -973,6 +980,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1014,6 +1025,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/mvme16x_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -760,6 +765,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -819,6 +825,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -831,18 +838,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -851,7 +857,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -916,6 +921,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -975,6 +982,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1016,6 +1027,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/q40_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -458,6 +465,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -475,8 +483,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -536,6 +542,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -544,7 +551,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -553,13 +560,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -680,6 +683,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -711,6 +715,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -722,8 +727,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -792,10 +799,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_Q40=m
 CONFIG_DMASOUND=m
@@ -809,6 +812,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -843,6 +847,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -902,6 +907,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -924,7 +930,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -933,7 +938,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -997,6 +1001,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1056,6 +1062,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1097,6 +1107,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/sun3_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,10 +155,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -166,6 +168,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -399,6 +402,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -418,7 +422,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -436,6 +442,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -488,6 +495,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -496,7 +504,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -505,13 +513,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -527,7 +531,6 @@ CONFIG_SUN3_82586=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -617,6 +620,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -647,19 +651,20 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -727,10 +732,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -776,6 +777,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -835,6 +837,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -847,18 +850,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -867,7 +869,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -932,6 +933,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -991,6 +994,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1032,6 +1039,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/m68k/configs/sun3x_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -160,10 +166,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -177,6 +179,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -447,6 +453,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -499,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -627,6 +631,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -657,6 +662,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +674,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -737,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -752,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -786,6 +791,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -845,6 +851,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -857,18 +864,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -877,7 +883,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -942,6 +947,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1001,6 +1008,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1042,6 +1053,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/mn10300/mm/fault.c

@@ -174,7 +174,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
 	 */
-	if (in_interrupt() || !mm)
+	if (in_atomic() || !mm)
 		goto no_context;
 
 	down_read(&mm->mmap_sem);

arch/sparc/kernel/of_device.c

@@ -241,7 +241,7 @@ static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 	return of_bus_default_map(addr, range, na, ns, pna);
 }
 
-static unsigned int of_bus_sbus_get_flags(const u32 *addr)
+static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
 {
 	return IORESOURCE_MEM;
 }

arch/sparc/kernel/ptrace.c

@@ -288,7 +288,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 38 * sizeof(u32),
+		.n = 38,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = genregs32_get, .set = genregs32_set
 	},
@@ -304,7 +304,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 99 * sizeof(u32),
+		.n = 99,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = fpregs32_get, .set = fpregs32_set
 	},

arch/sparc64/kernel/pci_psycho.c

@@ -744,16 +744,16 @@ static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
 	 * the second will just error out since we do not pass in
 	 * IRQF_SHARED.
 	 */
-	err = request_irq(op->irqs[1], psycho_ue_intr, 0,
+	err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
 			  "PSYCHO_UE", pbm);
-	err = request_irq(op->irqs[2], psycho_ce_intr, 0,
+	err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
 			  "PSYCHO_CE", pbm);
 
 	/* This one, however, ought not to fail.  We can just warn
 	 * about it since the system can still operate properly even
 	 * if this fails.
 	 */
-	err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+	err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
 			  "PSYCHO_PCIERR", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Could not register PCIERR, "

arch/sparc64/kernel/prom.c

@@ -156,55 +156,11 @@ static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
 		return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
 }
 
-#define PSYCHO_IMAP_SCSI	0x1000UL
-#define PSYCHO_IMAP_ETH		0x1008UL
-#define PSYCHO_IMAP_BPP		0x1010UL
-#define PSYCHO_IMAP_AU_REC	0x1018UL
-#define PSYCHO_IMAP_AU_PLAY	0x1020UL
-#define PSYCHO_IMAP_PFAIL	0x1028UL
-#define PSYCHO_IMAP_KMS		0x1030UL
-#define PSYCHO_IMAP_FLPY	0x1038UL
-#define PSYCHO_IMAP_SHW		0x1040UL
-#define PSYCHO_IMAP_KBD		0x1048UL
-#define PSYCHO_IMAP_MS		0x1050UL
-#define PSYCHO_IMAP_SER		0x1058UL
-#define PSYCHO_IMAP_TIM0	0x1060UL
-#define PSYCHO_IMAP_TIM1	0x1068UL
-#define PSYCHO_IMAP_UE		0x1070UL
-#define PSYCHO_IMAP_CE		0x1078UL
-#define PSYCHO_IMAP_A_ERR	0x1080UL
-#define PSYCHO_IMAP_B_ERR	0x1088UL
-#define PSYCHO_IMAP_PMGMT	0x1090UL
-#define PSYCHO_IMAP_GFX		0x1098UL
-#define PSYCHO_IMAP_EUPA	0x10a0UL
-
-static unsigned long __psycho_onboard_imap_off[] = {
-/*0x20*/	PSYCHO_IMAP_SCSI,
-/*0x21*/	PSYCHO_IMAP_ETH,
-/*0x22*/	PSYCHO_IMAP_BPP,
-/*0x23*/	PSYCHO_IMAP_AU_REC,
-/*0x24*/	PSYCHO_IMAP_AU_PLAY,
-/*0x25*/	PSYCHO_IMAP_PFAIL,
-/*0x26*/	PSYCHO_IMAP_KMS,
-/*0x27*/	PSYCHO_IMAP_FLPY,
-/*0x28*/	PSYCHO_IMAP_SHW,
-/*0x29*/	PSYCHO_IMAP_KBD,
-/*0x2a*/	PSYCHO_IMAP_MS,
-/*0x2b*/	PSYCHO_IMAP_SER,
-/*0x2c*/	PSYCHO_IMAP_TIM0,
-/*0x2d*/	PSYCHO_IMAP_TIM1,
-/*0x2e*/	PSYCHO_IMAP_UE,
-/*0x2f*/	PSYCHO_IMAP_CE,
-/*0x30*/	PSYCHO_IMAP_A_ERR,
-/*0x31*/	PSYCHO_IMAP_B_ERR,
-/*0x32*/	PSYCHO_IMAP_PMGMT,
-/*0x33*/	PSYCHO_IMAP_GFX,
-/*0x34*/	PSYCHO_IMAP_EUPA,
-};
+#define PSYCHO_OBIO_IMAP_BASE	0x1000UL
+
 #define PSYCHO_ONBOARD_IRQ_BASE		0x20
-#define PSYCHO_ONBOARD_IRQ_LAST		0x34
 #define psycho_onboard_imap_offset(__ino) \
-	__psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+	(PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
 
 #define PSYCHO_ICLR_A_SLOT0	0x1400UL
 #define PSYCHO_ICLR_SCSI	0x1800UL
@@ -228,10 +184,6 @@ static unsigned int psycho_irq_build(struct device_node *dp,
 		imap_off = psycho_pcislot_imap_offset(ino);
 	} else {
 		/* Onboard device */
-		if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
-			prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
-			prom_halt();
-		}
 		imap_off = psycho_onboard_imap_offset(ino);
 	}
 
@@ -318,23 +270,6 @@ static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
 
 #define SABRE_IMAP_A_SLOT0	0x0c00UL
 #define SABRE_IMAP_B_SLOT0	0x0c20UL
-#define SABRE_IMAP_SCSI		0x1000UL
-#define SABRE_IMAP_ETH		0x1008UL
-#define SABRE_IMAP_BPP		0x1010UL
-#define SABRE_IMAP_AU_REC	0x1018UL
-#define SABRE_IMAP_AU_PLAY	0x1020UL
-#define SABRE_IMAP_PFAIL	0x1028UL
-#define SABRE_IMAP_KMS		0x1030UL
-#define SABRE_IMAP_FLPY		0x1038UL
-#define SABRE_IMAP_SHW		0x1040UL
-#define SABRE_IMAP_KBD		0x1048UL
-#define SABRE_IMAP_MS		0x1050UL
-#define SABRE_IMAP_SER		0x1058UL
-#define SABRE_IMAP_UE		0x1070UL
-#define SABRE_IMAP_CE		0x1078UL
-#define SABRE_IMAP_PCIERR	0x1080UL
-#define SABRE_IMAP_GFX		0x1098UL
-#define SABRE_IMAP_EUPA		0x10a0UL
 #define SABRE_ICLR_A_SLOT0	0x1400UL
 #define SABRE_ICLR_B_SLOT0	0x1480UL
 #define SABRE_ICLR_SCSI		0x1800UL
@@ -364,33 +299,10 @@ static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
 		return SABRE_IMAP_B_SLOT0 + (slot * 8);
 }
 
-static unsigned long __sabre_onboard_imap_off[] = {
-/*0x20*/	SABRE_IMAP_SCSI,
-/*0x21*/	SABRE_IMAP_ETH,
-/*0x22*/	SABRE_IMAP_BPP,
-/*0x23*/	SABRE_IMAP_AU_REC,
-/*0x24*/	SABRE_IMAP_AU_PLAY,
-/*0x25*/	SABRE_IMAP_PFAIL,
-/*0x26*/	SABRE_IMAP_KMS,
-/*0x27*/	SABRE_IMAP_FLPY,
-/*0x28*/	SABRE_IMAP_SHW,
-/*0x29*/	SABRE_IMAP_KBD,
-/*0x2a*/	SABRE_IMAP_MS,
-/*0x2b*/	SABRE_IMAP_SER,
-/*0x2c*/	0 /* reserved */,
-/*0x2d*/	0 /* reserved */,
-/*0x2e*/	SABRE_IMAP_UE,
-/*0x2f*/	SABRE_IMAP_CE,
-/*0x30*/	SABRE_IMAP_PCIERR,
-/*0x31*/	0 /* reserved */,
-/*0x32*/	0 /* reserved */,
-/*0x33*/	SABRE_IMAP_GFX,
-/*0x34*/	SABRE_IMAP_EUPA,
-};
-#define SABRE_ONBOARD_IRQ_BASE		0x20
-#define SABRE_ONBOARD_IRQ_LAST		0x30
+#define SABRE_OBIO_IMAP_BASE	0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE	0x20
 #define sabre_onboard_imap_offset(__ino) \
-	__sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+	(SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
 
 #define sabre_iclr_offset(ino)					      \
 	((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) :  \
@@ -453,10 +365,6 @@ static unsigned int sabre_irq_build(struct device_node *dp,
 		imap_off = sabre_pcislot_imap_offset(ino);
 	} else {
 		/* onboard device */
-		if (ino > SABRE_ONBOARD_IRQ_LAST) {
-			prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
-			prom_halt();
-		}
 		imap_off = sabre_onboard_imap_offset(ino);
 	}
 

arch/sparc64/kernel/ptrace.c

@@ -443,7 +443,7 @@ static const struct user_regset sparc64_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 36 * sizeof(u64),
+		.n = 36,
 		.size = sizeof(u64), .align = sizeof(u64),
 		.get = genregs64_get, .set = genregs64_set
 	},
@@ -455,7 +455,7 @@ static const struct user_regset sparc64_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 35 * sizeof(u64),
+		.n = 35,
 		.size = sizeof(u64), .align = sizeof(u64),
 		.get = fpregs64_get, .set = fpregs64_set
 	},
@@ -801,7 +801,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 38 * sizeof(u32),
+		.n = 38,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = genregs32_get, .set = genregs32_set
 	},
@@ -817,7 +817,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 99 * sizeof(u32),
+		.n = 99,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = fpregs32_get, .set = fpregs32_set
 	},

arch/x86/kvm/mmu.c

@@ -711,6 +711,10 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
 	u64 *spte;
 	int young = 0;
 
+	/* always return old for EPT */
+	if (!shadow_accessed_mask)
+		return 0;
+
 	spte = rmap_next(kvm, rmapp, NULL);
 	while (spte) {
 		int _young;

arch/x86/kvm/svm.c

@@ -62,6 +62,7 @@ static int npt = 1;
 module_param(npt, int, S_IRUGO);
 
 static void kvm_reput_irq(struct vcpu_svm *svm);
+static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 
 static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
 {
@@ -878,6 +879,10 @@ set:
 static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE;
+	unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4;
+
+	if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
+		force_new_asid(vcpu);
 
 	vcpu->arch.cr4 = cr4;
 	if (!npt_enabled)
@@ -1027,6 +1032,13 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 		KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
 			    (u32)fault_address, (u32)(fault_address >> 32),
 			    handler);
+	/*
+	 * FIXME: Tis shouldn't be necessary here, but there is a flush
+	 * missing in the MMU code. Until we find this bug, flush the
+	 * complete TLB here on an NPF
+	 */
+	if (npt_enabled)
+		svm_flush_tlb(&svm->vcpu);
 
 	if (event_injection)
 		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);

arch/x86/kvm/vmx.c

@@ -3301,8 +3301,7 @@ static int __init vmx_init(void)
 		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
 			VMX_EPT_WRITABLE_MASK |
 			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
-		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
-				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+		kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
 				VMX_EPT_EXECUTABLE_MASK);
 		kvm_enable_tdp();
 	} else

arch/x86/kvm/vmx.h

@@ -370,8 +370,6 @@ enum vmcs_field {
 #define VMX_EPT_READABLE_MASK			0x1ull
 #define VMX_EPT_WRITABLE_MASK			0x2ull
 #define VMX_EPT_EXECUTABLE_MASK			0x4ull
-#define VMX_EPT_FAKE_ACCESSED_MASK		(1ull << 62)
-#define VMX_EPT_FAKE_DIRTY_MASK			(1ull << 63)
 
 #define VMX_EPT_IDENTITY_PAGETABLE_ADDR		0xfffbc000ul
 

block/cmd-filter.c

@@ -49,6 +49,7 @@ int blk_verify_command(struct blk_cmd_filter *filter,
 }
 EXPORT_SYMBOL(blk_verify_command);
 
+#if 0
 /* and now, the sysfs stuff */
 static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
 			     int rw)
@@ -233,3 +234,4 @@ void blk_unregister_filter(struct gendisk *disk)
 	kobject_put(disk->holder_dir->parent);
 }
 EXPORT_SYMBOL(blk_unregister_filter);
+#endif

drivers/ata/ata_piix.c

@@ -1499,7 +1499,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	 * off.
 	 */
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
-		int rc = piix_disable_ahci(pdev);
+		rc = piix_disable_ahci(pdev);
 		if (rc)
 			return rc;
 	}

drivers/ata/sata_inic162x.c

@@ -96,6 +96,7 @@ enum {
 	PORT_SCR		= 0x20,
 
 	/* HOST_CTL bits */
+	HCTL_LEDEN		= (1 << 3),  /* enable LED operation */
 	HCTL_IRQOFF		= (1 << 8),  /* global IRQ off */
 	HCTL_FTHD0		= (1 << 10), /* fifo threshold 0 */
 	HCTL_FTHD1		= (1 << 11), /* fifo threshold 1*/
@@ -540,7 +541,7 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
 	void __iomem *port_base = inic_port_base(ap);
 
 	/* fire up the ADMA engine */
-	writew(HCTL_FTHD0, port_base + HOST_CTL);
+	writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
 	writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
 	writeb(0, port_base + PORT_CPB_PTQFIFO);
 

drivers/ide/ide-cd.c

@@ -1933,7 +1933,6 @@ static void ide_cd_remove(ide_drive_t *drive)
 
 	ide_proc_unregister_driver(drive, info->driver);
 
-	blk_unregister_filter(info->disk);
 	del_gendisk(info->disk);
 
 	ide_cd_put(info);
@@ -2159,7 +2158,6 @@ static int ide_cd_probe(ide_drive_t *drive)
 	g->fops = &idecd_ops;
 	g->flags |= GENHD_FL_REMOVABLE;
 	add_disk(g);
-	blk_register_filter(g);
 	return 0;
 
 out_free_cd:

drivers/ide/pci/hpt366.c

@@ -613,6 +613,14 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
 	return 0;
 }
 
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+	struct ide_host *host	= dev_get_drvdata(dev);
+	struct hpt_info *info	= (struct hpt_info *)host->host_priv;
+
+	return dev == host->dev[1] ? info + 1 : info;
+}
+
 /*
  * The Marvell bridge chips used on the HighPoint SATA cards do not seem
  * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
@@ -621,9 +629,7 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
 static u8 hpt3xx_udma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	u8 mask 		= hwif->ultra_mask;
 
 	switch (info->chip_type) {
@@ -662,9 +668,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
 static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
 	switch (info->chip_type) {
 	case HPT372 :
@@ -700,8 +704,7 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	struct hpt_timings *t	= info->timings;
 	u8  itr_addr		= 0x40 + (drive->dn * 4);
 	u32 old_itr		= 0;
@@ -744,8 +747,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
 	if (drive->quirk_list) {
 		if (info->chip_type >= HPT370) {
@@ -973,8 +975,7 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
 static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 {
 	unsigned long io_base	= pci_resource_start(dev, 4);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (&dev->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(&dev->dev);
 	const char *name	= DRV_NAME;
 	u8 pci_clk,  dpll_clk	= 0;	/* PCI and DPLL clock in MHz */
 	u8 chip_type;
@@ -1217,8 +1218,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	u8 chip_type		= info->chip_type;
 	u8 scr1 = 0, ata66	= hwif->channel ? 0x01 : 0x02;
 
@@ -1262,8 +1262,7 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	int serialize		= HPT_SERIALIZE_IO;
 	u8  chip_type		= info->chip_type;
 	u8  new_mcr, old_mcr	= 0;

drivers/media/video/Kconfig

@@ -968,7 +968,7 @@ config VIDEO_PXA27x
 
 config VIDEO_SH_MOBILE_CEU
 	tristate "SuperH Mobile CEU Interface driver"
-	depends on VIDEO_DEV
+	depends on VIDEO_DEV && HAS_DMA
 	select SOC_CAMERA
 	select VIDEOBUF_DMA_CONTIG
 	---help---

drivers/memstick/core/memstick.c

@@ -185,7 +185,7 @@ static void memstick_free(struct device *dev)
 }
 
 static struct class memstick_host_class = {
-	.name       = "memstick_host",
+	.name        = "memstick_host",
 	.dev_release = memstick_free
 };
 
@@ -264,7 +264,7 @@ EXPORT_SYMBOL(memstick_new_req);
  * @sg - TPC argument
  */
 void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
-			  struct scatterlist *sg)
+			  const struct scatterlist *sg)
 {
 	mrq->tpc = tpc;
 	if (tpc & 8)
@@ -294,7 +294,7 @@ EXPORT_SYMBOL(memstick_init_req_sg);
  * user supplied buffer.
  */
 void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
-		       void *buf, size_t length)
+		       const void *buf, size_t length)
 {
 	mrq->tpc = tpc;
 	if (tpc & 8)
@@ -439,7 +439,7 @@ static void memstick_check(struct work_struct *work)
 	if (!host->card) {
 		if (memstick_power_on(host))
 			goto out_power_off;
-	} else
+	} else if (host->card->stop)
 		host->card->stop(host->card);
 
 	card = memstick_alloc_card(host);
@@ -458,7 +458,7 @@ static void memstick_check(struct work_struct *work)
 			    || !(host->card->check(host->card))) {
 				device_unregister(&host->card->dev);
 				host->card = NULL;
-			} else
+			} else if (host->card->start)
 				host->card->start(host->card);
 		}
 

drivers/memstick/core/mspro_block.c

@@ -30,6 +30,8 @@ module_param(major, int, 0644);
 #define MSPRO_BLOCK_SIGNATURE        0xa5c3
 #define MSPRO_BLOCK_MAX_ATTRIBUTES   41
 
+#define MSPRO_BLOCK_PART_SHIFT 3
+
 enum {
 	MSPRO_BLOCK_ID_SYSINFO         = 0x10,
 	MSPRO_BLOCK_ID_MODELNAME       = 0x15,
@@ -195,7 +197,7 @@ static int mspro_block_bd_open(struct inode *inode, struct file *filp)
 static int mspro_block_disk_release(struct gendisk *disk)
 {
 	struct mspro_block_data *msb = disk->private_data;
-	int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT;
+	int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT;
 
 	mutex_lock(&mspro_block_disk_lock);
 
@@ -877,6 +879,7 @@ static int mspro_block_switch_interface(struct memstick_dev *card)
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
 	int rc = 0;
 
+try_again:
 	if (msb->caps & MEMSTICK_CAP_PAR4)
 		rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4);
 	else
@@ -930,6 +933,18 @@ static int mspro_block_switch_interface(struct memstick_dev *card)
 		rc = memstick_set_rw_addr(card);
 		if (!rc)
 			rc = mspro_block_set_interface(card, msb->system);
+
+		if (!rc) {
+			msleep(150);
+			rc = mspro_block_wait_for_ced(card);
+			if (rc)
+				return rc;
+
+			if (msb->caps & MEMSTICK_CAP_PAR8) {
+				msb->caps &= ~MEMSTICK_CAP_PAR8;
+				goto try_again;
+			}
+		}
 	}
 	return rc;
 }
@@ -1117,14 +1132,16 @@ static int mspro_block_init_card(struct memstick_dev *card)
 		return -EIO;
 
 	msb->caps = host->caps;
-	rc = mspro_block_switch_interface(card);
+
+	msleep(150);
+	rc = mspro_block_wait_for_ced(card);
 	if (rc)
 		return rc;
 
-	msleep(200);
-	rc = mspro_block_wait_for_ced(card);
+	rc = mspro_block_switch_interface(card);
 	if (rc)
 		return rc;
+
 	dev_dbg(&card->dev, "card activated\n");
 	if (msb->system != MEMSTICK_SYS_SERIAL)
 		msb->caps |= MEMSTICK_CAP_AUTO_GET_INT;
@@ -1192,12 +1209,12 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 	if (rc)
 		return rc;
 
-	if ((disk_id << MEMSTICK_PART_SHIFT) > 255) {
+	if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) {
 		rc = -ENOSPC;
 		goto out_release_id;
 	}
 
-	msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT);
+	msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT);
 	if (!msb->disk) {
 		rc = -ENOMEM;
 		goto out_release_id;
@@ -1220,7 +1237,7 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 				   MSPRO_BLOCK_MAX_PAGES * msb->page_size);
 
 	msb->disk->major = major;
-	msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT;
+	msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT;
 	msb->disk->fops = &ms_block_bdops;
 	msb->usage_count = 1;
 	msb->disk->private_data = msb;
@@ -1416,7 +1433,7 @@ out_unlock:
 
 static struct memstick_device_id mspro_block_id_tbl[] = {
 	{MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO,
-	 MEMSTICK_CLASS_GENERIC_DUO},
+	 MEMSTICK_CLASS_DUO},
 	{}
 };
 

drivers/memstick/host/jmb38x_ms.c

@@ -81,6 +81,8 @@ struct jmb38x_ms {
 #define TPC_CODE_SZ_MASK       0x00000700
 #define TPC_DATA_SZ_MASK       0x00000007
 
+#define HOST_CONTROL_TDELAY_EN 0x00040000
+#define HOST_CONTROL_HW_OC_P   0x00010000
 #define HOST_CONTROL_RESET_REQ 0x00008000
 #define HOST_CONTROL_REI       0x00004000
 #define HOST_CONTROL_LED       0x00000400
@@ -88,6 +90,7 @@ struct jmb38x_ms {
 #define HOST_CONTROL_RESET     0x00000100
 #define HOST_CONTROL_POWER_EN  0x00000080
 #define HOST_CONTROL_CLOCK_EN  0x00000040
+#define HOST_CONTROL_REO       0x00000008
 #define HOST_CONTROL_IF_SHIFT  4
 
 #define HOST_CONTROL_IF_SERIAL 0x0
@@ -133,11 +136,15 @@ struct jmb38x_ms {
 #define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
 
 #define CLOCK_CONTROL_40MHZ   0x00000001
-#define CLOCK_CONTROL_50MHZ   0x00000002
+#define CLOCK_CONTROL_50MHZ   0x0000000a
 #define CLOCK_CONTROL_60MHZ   0x00000008
 #define CLOCK_CONTROL_62_5MHZ 0x0000000c
 #define CLOCK_CONTROL_OFF     0x00000000
 
+#define PCI_CTL_CLOCK_DLY_ADDR   0x000000b0
+#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
+#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
+
 enum {
 	CMD_READY    = 0x01,
 	FIFO_READY   = 0x02,
@@ -367,8 +374,7 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh)
 		return host->req->error;
 	}
 
-	dev_dbg(&msh->dev, "control %08x\n",
-		readl(host->addr + HOST_CONTROL));
+	dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL));
 	dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS));
 	dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS));
 
@@ -637,7 +643,7 @@ static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
 		ndelay(20);
 	}
 	dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
-	return -EIO;
+	/* return -EIO; */
 
 reset_next:
 	writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
@@ -680,7 +686,9 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
 
 			host_ctl = 7;
 			host_ctl |= HOST_CONTROL_POWER_EN
-				 | HOST_CONTROL_CLOCK_EN;
+				    | HOST_CONTROL_CLOCK_EN
+				    | HOST_CONTROL_HW_OC_P
+				    | HOST_CONTROL_TDELAY_EN;
 			writel(host_ctl, host->addr + HOST_CONTROL);
 
 			writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
@@ -704,33 +712,40 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
 		break;
 	case MEMSTICK_INTERFACE:
 		host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
+		pci_read_config_dword(host->chip->pdev,
+				      PCI_CTL_CLOCK_DLY_ADDR,
+				      &clock_delay);
+		clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
+					: ~PCI_CTL_CLOCK_DLY_MASK_A;
 
 		if (value == MEMSTICK_SERIAL) {
 			host_ctl &= ~HOST_CONTROL_FAST_CLK;
+			host_ctl &= ~HOST_CONTROL_REO;
 			host_ctl |= HOST_CONTROL_IF_SERIAL
 				    << HOST_CONTROL_IF_SHIFT;
 			host_ctl |= HOST_CONTROL_REI;
 			clock_ctl = CLOCK_CONTROL_40MHZ;
-			clock_delay = 0;
 		} else if (value == MEMSTICK_PAR4) {
-			host_ctl |= HOST_CONTROL_FAST_CLK;
+			host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
 			host_ctl |= HOST_CONTROL_IF_PAR4
 				    << HOST_CONTROL_IF_SHIFT;
 			host_ctl &= ~HOST_CONTROL_REI;
 			clock_ctl = CLOCK_CONTROL_40MHZ;
-			clock_delay = 4;
+			clock_delay |= host->id ? (4 << 12) : (4 << 8);
 		} else if (value == MEMSTICK_PAR8) {
 			host_ctl |= HOST_CONTROL_FAST_CLK;
 			host_ctl |= HOST_CONTROL_IF_PAR8
 				    << HOST_CONTROL_IF_SHIFT;
-			host_ctl &= ~HOST_CONTROL_REI;
-			clock_ctl = CLOCK_CONTROL_60MHZ;
-			clock_delay = 0;
+			host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
+			clock_ctl = CLOCK_CONTROL_50MHZ;
 		} else
 			return -EINVAL;
+
 		writel(host_ctl, host->addr + HOST_CONTROL);
 		writel(clock_ctl, host->addr + CLOCK_CONTROL);
-		writel(clock_delay, host->addr + CLOCK_DELAY);
+		pci_write_config_dword(host->chip->pdev,
+				       PCI_CTL_CLOCK_DLY_ADDR,
+				       clock_delay);
 		break;
 	};
 	return 0;

drivers/misc/sgi-gru/grufile.c

@@ -445,6 +445,9 @@ static void __exit gru_exit(void)
 	int order = get_order(sizeof(struct gru_state) *
 			      GRU_CHIPLETS_PER_BLADE);
 
+	if (!IS_UV())
+		return;
+
 	for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
 		free_irq(IRQ_GRU + i, NULL);
 

drivers/net/niu.c

@@ -5984,6 +5984,56 @@ static void niu_netif_start(struct niu *np)
 	niu_enable_interrupts(np, 1);
 }
 
+static void niu_reset_buffers(struct niu *np)
+{
+	int i, j, k, err;
+
+	if (np->rx_rings) {
+		for (i = 0; i < np->num_rx_rings; i++) {
+			struct rx_ring_info *rp = &np->rx_rings[i];
+
+			for (j = 0, k = 0; j < MAX_RBR_RING_SIZE; j++) {
+				struct page *page;
+
+				page = rp->rxhash[j];
+				while (page) {
+					struct page *next =
+						(struct page *) page->mapping;
+					u64 base = page->index;
+					base = base >> RBR_DESCR_ADDR_SHIFT;
+					rp->rbr[k++] = cpu_to_le32(base);
+					page = next;
+				}
+			}
+			for (; k < MAX_RBR_RING_SIZE; k++) {
+				err = niu_rbr_add_page(np, rp, GFP_ATOMIC, k);
+				if (unlikely(err))
+					break;
+			}
+
+			rp->rbr_index = rp->rbr_table_size - 1;
+			rp->rcr_index = 0;
+			rp->rbr_pending = 0;
+			rp->rbr_refill_pending = 0;
+		}
+	}
+	if (np->tx_rings) {
+		for (i = 0; i < np->num_tx_rings; i++) {
+			struct tx_ring_info *rp = &np->tx_rings[i];
+
+			for (j = 0; j < MAX_TX_RING_SIZE; j++) {
+				if (rp->tx_buffs[j].skb)
+					(void) release_tx_packet(np, rp, j);
+			}
+
+			rp->pending = MAX_TX_RING_SIZE;
+			rp->prod = 0;
+			rp->cons = 0;
+			rp->wrap_bit = 0;
+		}
+	}
+}
+
 static void niu_reset_task(struct work_struct *work)
 {
 	struct niu *np = container_of(work, struct niu, reset_task);
@@ -6006,6 +6056,12 @@ static void niu_reset_task(struct work_struct *work)
 
 	niu_stop_hw(np);
 
+	spin_unlock_irqrestore(&np->lock, flags);
+
+	niu_reset_buffers(np);
+
+	spin_lock_irqsave(&np->lock, flags);
+
 	err = niu_init_hw(np);
 	if (!err) {
 		np->timer.expires = jiffies + HZ;

drivers/net/wireless/ath9k/beacon.c

@@ -209,6 +209,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 	unsigned int curlen;
 	struct ath_txq *cabq;
 	struct ath_txq *mcastq;
+	struct ieee80211_tx_info *info;
 	avp = sc->sc_vaps[if_id];
 
 	mcastq = &avp->av_mcastq;
@@ -232,6 +233,18 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 	 */
 	curlen = skb->len;
 
+	info = IEEE80211_SKB_CB(skb);
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		/*
+		 * TODO: make sure the seq# gets assigned properly (vs. other
+		 * TX frames)
+		 */
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		sc->seq_no += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+	}
+
 	/* XXX: spin_lock_bh should not be used here, but sparse bitches
 	 * otherwise. We should fix sparse :) */
 	spin_lock_bh(&mcastq->axq_lock);

drivers/net/wireless/ath9k/core.h

@@ -992,6 +992,7 @@ struct ath_softc {
 	u32 sc_txintrperiod;	/* tx interrupt batching */
 	int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME	AC -> h/w qnum */
 	u32 sc_ant_tx[8];	/* recent tx frames/antenna */
+	u16 seq_no; /* TX sequence number */
 
 	/* Beacon */
 	struct ath9k_tx_queue_info sc_beacon_qi;

drivers/net/wireless/ath9k/main.c

@@ -369,6 +369,20 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 {
 	struct ath_softc *sc = hw->priv;
 	int hdrlen, padsize;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	/*
+	 * As a temporary workaround, assign seq# here; this will likely need
+	 * to be cleaned up to work better with Beacon transmission and virtual
+	 * BSSes.
+	 */
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			sc->seq_no += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+	}
 
 	/* Add the padding after the header if this is not already done */
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);

drivers/pci/hotplug/fakephp.c

@@ -320,15 +320,15 @@ static int disable_slot(struct hotplug_slot *slot)
 			return -ENODEV;
 		}
 
+		/* remove the device from the pci core */
+		pci_remove_bus_device(dev);
+
 		/* queue work item to blow away this sysfs entry and other
 		 * parts.
 		 */
 		INIT_WORK(&dslot->remove_work, remove_slot_worker);
 		queue_work(dummyphp_wq, &dslot->remove_work);
 
-		/* blow away this sysfs entry and other parts. */
-		remove_slot(dslot);
-
 		pci_dev_put(dev);
 	}
 	return 0;

drivers/pci/hotplug/pciehp_hpc.c

@@ -258,7 +258,7 @@ static int pcie_poll_cmd(struct controller *ctrl)
 			return 1;
 		}
 	}
-	while (timeout > 1000) {
+	while (timeout > 0) {
 		msleep(10);
 		timeout -= 10;
 		if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {

drivers/pci/intel-iommu.c

@@ -2348,11 +2348,34 @@ static void __init iommu_exit_mempool(void)
 
 }
 
+static int blacklist_iommu(const struct dmi_system_id *id)
+{
+	printk(KERN_INFO "%s detected; disabling IOMMU\n",
+	       id->ident);
+	dmar_disabled = 1;
+	return 0;
+}
+
+static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
+	{	/* Some DG33BU BIOS revisions advertised non-existent VT-d */
+		.callback = blacklist_iommu,
+		.ident = "Intel DG33BU",
+		{	DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
+		}
+	},
+	{ }
+};
+
+
 void __init detect_intel_iommu(void)
 {
 	if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
 		return;
 	if (early_dmar_detect()) {
+		dmi_check_system(intel_iommu_dmi_table);
+		if (dmar_disabled)
+			return;
 		iommu_detected = 1;
 	}
 }

drivers/pci/probe.c

@@ -304,6 +304,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		} else {
 			res->start = l64;
 			res->end = l64 + sz64;
+			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
+				pci_name(dev), pos, (unsigned long long)res->start,
+				(unsigned long long)res->end);
 		}
 	} else {
 		sz = pci_size(l, sz, mask);
@@ -313,6 +316,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 
 		res->start = l;
 		res->end = l + sz;
+		printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
+			pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
+			(unsigned long long)res->start, (unsigned long long)res->end);
 	}
 
  out:
@@ -383,7 +389,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
-		printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+		printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
+			pci_name(dev), (unsigned long long) res->start,
+			(unsigned long long) res->end);
 	}
 
 	res = child->resource[1];
@@ -395,7 +403,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+		printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
+			pci_name(dev), (unsigned long long) res->start,
+			(unsigned long long) res->end);
 	}
 
 	res = child->resource[2];
@@ -431,7 +441,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
+		printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+			pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
+			(unsigned long long) res->start, (unsigned long long) res->end);
 	}
 }
 

drivers/pci/setup-bus.c

@@ -540,7 +540,11 @@ static void pci_bus_dump_res(struct pci_bus *bus)
                 if (!res)
                         continue;
 
-		printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+		printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n",
+			bus->number, i,
+			(res->flags & IORESOURCE_IO) ? "io port" : "mmio",
+			(unsigned long long) res->start,
+			(unsigned long long) res->end);
         }
 }
 

drivers/pcmcia/soc_common.c

@@ -748,7 +748,9 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 
 		add_timer(&skt->poll_timer);
 
-		device_create_file(&skt->socket.dev, &dev_attr_status);
+		ret = device_create_file(&skt->socket.dev, &dev_attr_status);
+		if (ret)
+			goto out_err_8;
 	}
 
 	dev_set_drvdata(dev, sinfo);
@@ -758,6 +760,8 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 	do {
 		skt = &sinfo->skt[i];
 
+		device_remove_file(&skt->socket.dev, &dev_attr_status);
+ out_err_8:
 		del_timer_sync(&skt->poll_timer);
 		pcmcia_unregister_socket(&skt->socket);
 

drivers/s390/scsi/zfcp_ccw.c

@@ -152,10 +152,8 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
  */
 static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 {
-	struct zfcp_adapter *adapter;
+	struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev);
 
-	down(&zfcp_data.config_sema);
-	adapter = dev_get_drvdata(&ccw_device->dev);
 	switch (event) {
 	case CIO_GONE:
 		dev_warn(&adapter->ccw_device->dev, "device gone\n");
@@ -174,8 +172,6 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 					89, NULL);
 		break;
 	}
-	zfcp_erp_wait(adapter);
-	up(&zfcp_data.config_sema);
 	return 1;
 }
 

drivers/s390/scsi/zfcp_fc.c

@@ -39,18 +39,6 @@ struct zfcp_gpn_ft {
 	struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS];
 };
 
-static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter,
-					      u32 d_id)
-{
-	struct zfcp_port *port;
-
-	list_for_each_entry(port, &adapter->port_list_head, list)
-		if ((port->d_id == d_id) &&
-		    !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status))
-			return port;
-	return NULL;
-}
-
 static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 				   struct fcp_rscn_element *elem)
 {
@@ -341,12 +329,13 @@ void zfcp_test_link(struct zfcp_port *port)
 
 	zfcp_port_get(port);
 	retval = zfcp_fc_adisc(port);
-	if (retval == 0 || retval == -EBUSY)
+	if (retval == 0)
 		return;
 
 	/* send of ADISC was not possible */
 	zfcp_port_put(port);
-	zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
+	if (retval != -EBUSY)
+		zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
 }
 
 static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
@@ -363,7 +352,6 @@ static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
 		if (ret)
 			return ret;
 		zfcp_erp_wait(adapter);
-		zfcp_port_put(adapter->nameserver_port);
 	}
 	return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED,
 				  &adapter->nameserver_port->status);
@@ -475,7 +463,7 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 	struct zfcp_adapter *adapter = ct->port->adapter;
 	struct zfcp_port *port, *tmp;
 	u32 d_id;
-	int ret = 0, x;
+	int ret = 0, x, last = 0;
 
 	if (ct->status)
 		return -EIO;
@@ -492,19 +480,24 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 	down(&zfcp_data.config_sema);
 
 	/* first entry is the header */
-	for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) {
+	for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) {
 		if (x % (ZFCP_GPN_FT_ENTRIES + 1))
 			acc++;
 		else
 			acc = sg_virt(++sg);
 
+		last = acc->control & 0x80;
 		d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 |
 		       acc->port_id[2];
 
 		/* skip the adapter's port and known remote ports */
-		if (acc->wwpn == fc_host_port_name(adapter->scsi_host) ||
-		     zfcp_get_port_by_did(adapter, d_id))
+		if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
+			continue;
+		port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
+		if (port) {
+			zfcp_port_get(port);
 			continue;
+		}
 
 		port = zfcp_port_enqueue(adapter, acc->wwpn,
 					 ZFCP_STATUS_PORT_DID_DID |
@@ -513,8 +506,6 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 			ret = PTR_ERR(port);
 		else
 			zfcp_erp_port_reopen(port, 0, 149, NULL);
-		if (acc->control & 0x80) /* last entry */
-			break;
 	}
 
 	zfcp_erp_wait(adapter);

drivers/s390/scsi/zfcp_fsf.c

@@ -710,10 +710,10 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req)
 
 static int zfcp_fsf_sbal_check(struct zfcp_qdio_queue *queue)
 {
-	spin_lock(&queue->lock);
+	spin_lock_bh(&queue->lock);
 	if (atomic_read(&queue->count))
 		return 1;
-	spin_unlock(&queue->lock);
+	spin_unlock_bh(&queue->lock);
 	return 0;
 }
 
@@ -722,13 +722,13 @@ static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
 	long ret;
 	struct zfcp_qdio_queue *req_q = &adapter->req_q;
 
-	spin_unlock(&req_q->lock);
+	spin_unlock_bh(&req_q->lock);
 	ret = wait_event_interruptible_timeout(adapter->request_wq,
 					zfcp_fsf_sbal_check(req_q), 5 * HZ);
 	if (ret > 0)
 		return 0;
 
-	spin_lock(&req_q->lock);
+	spin_lock_bh(&req_q->lock);
 	return -EIO;
 }
 
@@ -870,14 +870,14 @@ int zfcp_fsf_status_read(struct zfcp_adapter *adapter)
 	volatile struct qdio_buffer_element *sbale;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS,
 				  ZFCP_REQ_NO_QTCB,
 				  adapter->pool.fsf_req_status_read);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -910,7 +910,7 @@ failed_buf:
 	zfcp_fsf_req_free(req);
 	zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -988,7 +988,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
 				  req_flags, adapter->pool.fsf_req_abort);
-	if (unlikely(IS_ERR(req)))
+	if (IS_ERR(req))
 		goto out;
 
 	if (unlikely(!(atomic_read(&unit->status) &
@@ -1106,13 +1106,13 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool,
 	struct zfcp_fsf_req *req;
 	int ret = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC,
 				  ZFCP_REQ_AUTO_CLEANUP, pool);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		ret = PTR_ERR(req);
 		goto out;
 	}
@@ -1148,7 +1148,7 @@ failed_send:
 	if (erp_action)
 		erp_action->fsf_req = NULL;
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return ret;
 }
 
@@ -1223,7 +1223,7 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els)
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS,
 				  ZFCP_REQ_AUTO_CLEANUP, NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		ret = PTR_ERR(req);
 		goto out;
 	}
@@ -1263,14 +1263,14 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 	struct zfcp_adapter *adapter = erp_action->adapter;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (!atomic_read(&adapter->req_q.count))
 		goto out;
 	req = zfcp_fsf_req_create(adapter,
 				  FSF_QTCB_EXCHANGE_CONFIG_DATA,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1295,7 +1295,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1306,13 +1306,13 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
 	struct zfcp_fsf_req *req = NULL;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
 				  0, NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1334,7 +1334,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	if (!retval)
 		wait_event(req->completion_wq,
 			   req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
@@ -1359,13 +1359,13 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action)
 	if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
 		return -EOPNOTSUPP;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (!atomic_read(&adapter->req_q.count))
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1385,7 +1385,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1405,13 +1405,13 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
 	if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
 		return -EOPNOTSUPP;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (!atomic_read(&adapter->req_q.count))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
 				  NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1427,7 +1427,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	if (!retval)
 		wait_event(req->completion_wq,
 			   req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
@@ -1531,7 +1531,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -1539,7 +1539,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 				  FSF_QTCB_OPEN_PORT_WITH_DID,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1562,7 +1562,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1603,14 +1603,14 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PORT,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1633,7 +1633,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1700,14 +1700,14 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PHYSICAL_PORT,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1731,7 +1731,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1875,14 +1875,14 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_OPEN_LUN,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1910,7 +1910,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1965,13 +1965,13 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1995,7 +1995,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -2228,7 +2228,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
 				  adapter->pool.fsf_req_scsi);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -2351,7 +2351,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
 				  adapter->pool.fsf_req_scsi);
-	if (unlikely(IS_ERR(req)))
+	if (IS_ERR(req))
 		goto out;
 
 	req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
@@ -2417,12 +2417,12 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter,
 		return ERR_PTR(-EINVAL);
 	}
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, fsf_cfdc->command, 0, NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = -EPERM;
 		goto out;
 	}
@@ -2447,7 +2447,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter,
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 
 	if (!retval) {
 		wait_event(req->completion_wq,

drivers/s390/scsi/zfcp_qdio.c

@@ -423,9 +423,9 @@ void zfcp_qdio_close(struct zfcp_adapter *adapter)
 
 	/* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */
 	req_q = &adapter->req_q;
-	spin_lock(&req_q->lock);
+	spin_lock_bh(&req_q->lock);
 	atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
-	spin_unlock(&req_q->lock);
+	spin_unlock_bh(&req_q->lock);
 
 	qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
 

drivers/scsi/Kconfig

@@ -63,7 +63,7 @@ comment "SCSI support type (disk, tape, CD-ROM)"
 config BLK_DEV_SD
 	tristate "SCSI disk support"
 	depends on SCSI
-	select CRC_T10DIF
+	select CRC_T10DIF if BLK_DEV_INTEGRITY
 	---help---
 	  If you want to use SCSI hard disks, Fibre Channel disks,
 	  Serial ATA (SATA) or Parallel ATA (PATA) hard disks,

drivers/scsi/device_handler/scsi_dh_alua.c

@@ -425,7 +425,7 @@ static int alua_check_sense(struct scsi_device *sdev,
 			/*
 			 * LUN Not Accessible - ALUA state transition
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
 			/*
 			 * LUN Not Accessible -- Target port in standby state
@@ -447,18 +447,18 @@ static int alua_check_sense(struct scsi_device *sdev,
 			/*
 			 * Power On, Reset, or Bus Device Reset, just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
 			/*
 			 * ALUA state changed
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		}
 		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
 			/*
 			 * Implicit ALUA state transition failed
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		}
 		break;
 	}
@@ -490,7 +490,7 @@ static int alua_stpg(struct scsi_device *sdev, int state,
 		if (!err)
 			return SCSI_DH_IO;
 		err = alua_check_sense(sdev, &sense_hdr);
-		if (retry > 0 && err == NEEDS_RETRY) {
+		if (retry > 0 && err == ADD_TO_MLQUEUE) {
 			retry--;
 			goto retry;
 		}
@@ -535,7 +535,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 			return SCSI_DH_IO;
 
 		err = alua_check_sense(sdev, &sense_hdr);
-		if (err == NEEDS_RETRY)
+		if (err == ADD_TO_MLQUEUE)
 			goto retry;
 		sdev_printk(KERN_INFO, sdev,
 			    "%s: rtpg sense code %02x/%02x/%02x\n",

drivers/scsi/device_handler/scsi_dh_emc.c

@@ -439,7 +439,7 @@ static int clariion_check_sense(struct scsi_device *sdev,
 			 * Unit Attention Code. This is the first IO
 			 * to the new path, so just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	}
 
@@ -514,7 +514,7 @@ retry:
 			return SCSI_DH_IO;
 
 		err = clariion_check_sense(sdev, &sshdr);
-		if (retry > 0 && err == NEEDS_RETRY) {
+		if (retry > 0 && err == ADD_TO_MLQUEUE) {
 			retry--;
 			goto retry;
 		}

drivers/scsi/device_handler/scsi_dh_rdac.c

@@ -551,7 +551,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 			 *
 			 * Just retry and wait.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	case ILLEGAL_REQUEST:
 		if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
@@ -568,7 +568,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 			/*
 			 * Power On, Reset, or Bus Device Reset, just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	}
 	/* success just means we do not care what scsi-ml does */

drivers/scsi/scsi_error.c

@@ -391,7 +391,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 
 	case HARDWARE_ERROR:
 		if (scmd->device->retry_hwerror)
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		else
 			return SUCCESS;
 

drivers/scsi/scsi_scan.c

@@ -1080,7 +1080,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	 * PDT=1Fh none (no FDD connected to the requested logical unit)
 	 */
 	if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
-	     (result[0] & 0x1f) == 0x1f) {
+	    (result[0] & 0x1f) == 0x1f &&
+	    !scsi_is_wlun(lun)) {
 		SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
 					"scsi scan: peripheral device type"
 					" of 31, no device added\n"));

drivers/scsi/sd.c

@@ -1875,7 +1875,6 @@ static int sd_probe(struct device *dev)
 
 	dev_set_drvdata(dev, sdkp);
 	add_disk(gd);
-	blk_register_filter(gd);
 	sd_dif_config_host(sdkp);
 
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
@@ -1909,7 +1908,6 @@ static int sd_remove(struct device *dev)
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
 
 	device_del(&sdkp->dev);
-	blk_unregister_filter(sdkp->disk);
 	del_gendisk(sdkp->disk);
 	sd_shutdown(dev);
 

drivers/scsi/sr.c

@@ -656,7 +656,6 @@ static int sr_probe(struct device *dev)
 	dev_set_drvdata(dev, cd);
 	disk->flags |= GENHD_FL_REMOVABLE;
 	add_disk(disk);
-	blk_register_filter(disk);
 
 	sdev_printk(KERN_DEBUG, sdev,
 		    "Attached scsi CD-ROM %s\n", cd->cdi.name);
@@ -895,7 +894,6 @@ static int sr_remove(struct device *dev)
 {
 	struct scsi_cd *cd = dev_get_drvdata(dev);
 
-	blk_unregister_filter(cd->disk);
 	del_gendisk(cd->disk);
 
 	mutex_lock(&sr_ref_mutex);

drivers/serial/imx.c

@@ -127,8 +127,13 @@
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz */
-#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
+#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define  UCR3_RXDMUXSEL	 (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
 #define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
 #define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
 #define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
@@ -445,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id)
 			readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
 		imx_txint(irq, dev_id);
 
-	if (sts & USR1_RTSS)
+	if (sts & USR1_RTSD)
 		imx_rtsint(irq, dev_id);
 
 	return IRQ_HANDLED;
@@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port)
 	temp |= (UCR2_RXEN | UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
 
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+	temp = readl(sport->port.membase + UCR3);
+	temp |= UCR3_RXDMUXSEL;
+	writel(temp, sport->port.membase + UCR3);
+#endif
+
 	/*
 	 * Enable modem status interrupts
 	 */
@@ -1133,13 +1144,19 @@ static int serial_imx_probe(struct platform_device *pdev)
 	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
 		sport->have_rtscts = 1;
 
-	if (pdata->init)
-		pdata->init(pdev);
+	if (pdata->init) {
+		ret = pdata->init(pdev);
+		if (ret)
+			goto clkput;
+	}
 
 	uart_add_one_port(&imx_reg, &sport->port);
 	platform_set_drvdata(pdev, &sport->port);
 
 	return 0;
+clkput:
+	clk_put(sport->clk);
+	clk_disable(sport->clk);
 unmap:
 	iounmap(sport->port.membase);
 free:

drivers/spi/pxa2xx_spi.c

@@ -47,9 +47,10 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 
 #define MAX_BUSES 3
 
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+#define DMA_INT_MASK		(DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL	(DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x)	(((x) & 0x07) == 0)
+#define MAX_DMA_LEN		8191
 
 /*
  * for testing SSCR1 changes that require SSP restart, basically
@@ -144,7 +145,6 @@ struct driver_data {
 	size_t tx_map_len;
 	u8 n_bytes;
 	u32 dma_width;
-	int cs_change;
 	int (*write)(struct driver_data *drv_data);
 	int (*read)(struct driver_data *drv_data);
 	irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
@@ -406,8 +406,45 @@ static void giveback(struct driver_data *drv_data)
 					struct spi_transfer,
 					transfer_list);
 
+	/* Delay if requested before any change in chip select */
+	if (last_transfer->delay_usecs)
+		udelay(last_transfer->delay_usecs);
+
+	/* Drop chip select UNLESS cs_change is true or we are returning
+	 * a message with an error, or next message is for another chip
+	 */
 	if (!last_transfer->cs_change)
 		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	else {
+		struct spi_message *next_msg;
+
+		/* Holding of cs was hinted, but we need to make sure
+		 * the next message is for the same chip.  Don't waste
+		 * time with the following tests unless this was hinted.
+		 *
+		 * We cannot postpone this until pump_messages, because
+		 * after calling msg->complete (below) the driver that
+		 * sent the current message could be unloaded, which
+		 * could invalidate the cs_control() callback...
+		 */
+
+		/* get a pointer to the next message, if any */
+		spin_lock_irqsave(&drv_data->lock, flags);
+		if (list_empty(&drv_data->queue))
+			next_msg = NULL;
+		else
+			next_msg = list_entry(drv_data->queue.next,
+					struct spi_message, queue);
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+
+		/* see if the next and current messages point
+		 * to the same chip
+		 */
+		if (next_msg && next_msg->spi != msg->spi)
+			next_msg = NULL;
+		if (!next_msg || msg->state == ERROR_STATE)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	}
 
 	msg->state = NULL;
 	if (msg->complete)
@@ -490,10 +527,9 @@ static void dma_transfer_complete(struct driver_data *drv_data)
 	msg->actual_length += drv_data->len -
 				(drv_data->rx_end - drv_data->rx);
 
-	/* Release chip select if requested, transfer delays are
-	 * handled in pump_transfers */
-	if (drv_data->cs_change)
-		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	/* Transfer delays and chip select release are
+	 * handled in pump_transfers or giveback
+	 */
 
 	/* Move to next transfer */
 	msg->state = next_transfer(drv_data);
@@ -602,10 +638,9 @@ static void int_transfer_complete(struct driver_data *drv_data)
 	drv_data->cur_msg->actual_length += drv_data->len -
 				(drv_data->rx_end - drv_data->rx);
 
-	/* Release chip select if requested, transfer delays are
-	 * handled in pump_transfers */
-	if (drv_data->cs_change)
-		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	/* Transfer delays and chip select release are
+	 * handled in pump_transfers or giveback
+	 */
 
 	/* Move to next transfer */
 	drv_data->cur_msg->state = next_transfer(drv_data);
@@ -840,23 +875,40 @@ static void pump_transfers(unsigned long data)
 		return;
 	}
 
-	/* Delay if requested at end of transfer*/
+	/* Delay if requested at end of transfer before CS change */
 	if (message->state == RUNNING_STATE) {
 		previous = list_entry(transfer->transfer_list.prev,
 					struct spi_transfer,
 					transfer_list);
 		if (previous->delay_usecs)
 			udelay(previous->delay_usecs);
+
+		/* Drop chip select only if cs_change is requested */
+		if (previous->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
 	}
 
-	/* Check transfer length */
-	if (transfer->len > 8191)
-	{
-		dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
-				"length greater than 8191\n");
-		message->status = -EINVAL;
-		giveback(drv_data);
-		return;
+	/* Check for transfers that need multiple DMA segments */
+	if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
+
+		/* reject already-mapped transfers; PIO won't always work */
+		if (message->is_dma_mapped
+				|| transfer->rx_dma || transfer->tx_dma) {
+			dev_err(&drv_data->pdev->dev,
+				"pump_transfers: mapped transfer length "
+				"of %lu is greater than %d\n",
+				transfer->len, MAX_DMA_LEN);
+			message->status = -EINVAL;
+			giveback(drv_data);
+			return;
+		}
+
+		/* warn ... we force this to PIO mode */
+		if (printk_ratelimit())
+			dev_warn(&message->spi->dev, "pump_transfers: "
+				"DMA disabled for transfer length %ld "
+				"greater than %d\n",
+				(long)drv_data->len, MAX_DMA_LEN);
 	}
 
 	/* Setup the transfer state based on the type of transfer */
@@ -878,7 +930,6 @@ static void pump_transfers(unsigned long data)
 	drv_data->len = transfer->len & DCMD_LENGTH;
 	drv_data->write = drv_data->tx ? chip->write : null_writer;
 	drv_data->read = drv_data->rx ? chip->read : null_reader;
-	drv_data->cs_change = transfer->cs_change;
 
 	/* Change speed and bit per word on a per transfer */
 	cr0 = chip->cr0;
@@ -925,7 +976,7 @@ static void pump_transfers(unsigned long data)
 							&dma_thresh))
 				if (printk_ratelimit())
 					dev_warn(&message->spi->dev,
-						"pump_transfer: "
+						"pump_transfers: "
 						"DMA burst size reduced to "
 						"match bits_per_word\n");
 		}
@@ -939,8 +990,23 @@ static void pump_transfers(unsigned long data)
 
 	message->state = RUNNING_STATE;
 
-	/* Try to map dma buffer and do a dma transfer if successful */
-	if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+	/* Try to map dma buffer and do a dma transfer if successful, but
+	 * only if the length is non-zero and less than MAX_DMA_LEN.
+	 *
+	 * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+	 * of PIO instead.  Care is needed above because the transfer may
+	 * have have been passed with buffers that are already dma mapped.
+	 * A zero-length transfer in PIO mode will not try to write/read
+	 * to/from the buffers
+	 *
+	 * REVISIT large transfers are exactly where we most want to be
+	 * using DMA.  If this happens much, split those transfers into
+	 * multiple DMA segments rather than forcing PIO.
+	 */
+	drv_data->dma_mapped = 0;
+	if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
+		drv_data->dma_mapped = map_dma_buffers(drv_data);
+	if (drv_data->dma_mapped) {
 
 		/* Ensure we have the correct interrupt handler */
 		drv_data->transfer_handler = dma_transfer;

drivers/spi/spi_mpc83xx.c

@@ -267,16 +267,13 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 	cs->hw_mode |= SPMODE_LEN(bits_per_word);
 
 	if ((mpc83xx_spi->spibrg / hz) > 64) {
+		cs->hw_mode |= SPMODE_DIV16;
 		pm = mpc83xx_spi->spibrg / (hz * 64);
 		if (pm > 16) {
-			cs->hw_mode |= SPMODE_DIV16;
-			pm /= 16;
-			if (pm > 16) {
-				dev_err(&spi->dev, "Requested speed is too "
-					"low: %d Hz. Will use %d Hz instead.\n",
-					hz, mpc83xx_spi->spibrg / 1024);
-				pm = 16;
-			}
+			dev_err(&spi->dev, "Requested speed is too "
+				"low: %d Hz. Will use %d Hz instead.\n",
+				hz, mpc83xx_spi->spibrg / 1024);
+			pm = 16;
 		}
 	} else
 		pm = mpc83xx_spi->spibrg / (hz * 4);
@@ -315,11 +312,20 @@ static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 	if (t->bits_per_word)
 		bits_per_word = t->bits_per_word;
 	len = t->len;
-	if (bits_per_word > 8)
+	if (bits_per_word > 8) {
+		/* invalid length? */
+		if (len & 1)
+			return -EINVAL;
 		len /= 2;
-	if (bits_per_word > 16)
+	}
+	if (bits_per_word > 16) {
+		/* invalid length? */
+		if (len & 1)
+			return -EINVAL;
 		len /= 2;
+	}
 	mpc83xx_spi->count = len;
+
 	INIT_COMPLETION(mpc83xx_spi->done);
 
 	/* enable rx ints */

drivers/spi/spi_s3c24xx.c

@@ -430,7 +430,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev)
 #endif
 
 MODULE_ALIAS("platform:s3c2410-spi");
-static struct platform_driver s3c24xx_spidrv = {
+static struct platform_driver s3c24xx_spi_driver = {
 	.remove		= __exit_p(s3c24xx_spi_remove),
 	.suspend	= s3c24xx_spi_suspend,
 	.resume		= s3c24xx_spi_resume,
@@ -442,12 +442,12 @@ static struct platform_driver s3c24xx_spidrv = {
 
 static int __init s3c24xx_spi_init(void)
 {
-        return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe);
+        return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
 }
 
 static void __exit s3c24xx_spi_exit(void)
 {
-        platform_driver_unregister(&s3c24xx_spidrv);
+        platform_driver_unregister(&s3c24xx_spi_driver);
 }
 
 module_init(s3c24xx_spi_init);

drivers/video/atmel_lcdfb.c

@@ -208,6 +208,36 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
 	return value;
 }
 
+static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+{
+	/* Turn off the LCD controller and the DMA controller */
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+			sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+	/* Wait for the LCDC core to become idle */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+		msleep(10);
+
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+}
+
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
+{
+	atmel_lcdfb_stop_nowait(sinfo);
+
+	/* Wait for DMA engine to become idle... */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+		msleep(10);
+}
+
+static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+{
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+		| ATMEL_LCDC_PWR);
+}
+
 static void atmel_lcdfb_update_dma(struct fb_info *info,
 			       struct fb_var_screeninfo *var)
 {
@@ -420,26 +450,8 @@ static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
 {
 	might_sleep();
 
-	/* LCD power off */
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
-	/* wait for the LCDC core to become idle */
-	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
-		msleep(10);
-
-	/* DMA disable */
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
-	/* wait for DMA engine to become idle */
-	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
-		msleep(10);
-
-	/* LCD power on */
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-
-	/* DMA enable */
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+	atmel_lcdfb_stop(sinfo);
+	atmel_lcdfb_start(sinfo);
 }
 
 /**
@@ -471,14 +483,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 		 info->var.xres, info->var.yres,
 		 info->var.xres_virtual, info->var.yres_virtual);
 
-	/* Turn off the LCD controller and the DMA controller */
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
-	/* Wait for the LCDC core to become idle */
-	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
-		msleep(10);
-
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+	atmel_lcdfb_stop_nowait(sinfo);
 
 	if (info->var.bits_per_pixel == 1)
 		info->fix.visual = FB_VISUAL_MONO01;
@@ -583,13 +588,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 		msleep(10);
 
-	dev_dbg(info->device, "  * re-enable DMA engine\n");
-	/* ...and enable it with updated configuration */
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-
-	dev_dbg(info->device, "  * re-enable LCDC core\n");
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+	atmel_lcdfb_start(sinfo);
 
 	dev_dbg(info->device, "  * DONE\n");
 
@@ -1032,11 +1031,20 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
 	struct fb_info *info = platform_get_drvdata(pdev);
 	struct atmel_lcdfb_info *sinfo = info->par;
 
+	/*
+	 * We don't want to handle interrupts while the clock is
+	 * stopped. It may take forever.
+	 */
+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
 	sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
 	if (sinfo->atmel_lcdfb_power_control)
 		sinfo->atmel_lcdfb_power_control(0);
+
+	atmel_lcdfb_stop(sinfo);
 	atmel_lcdfb_stop_clock(sinfo);
+
 	return 0;
 }
 
@@ -1046,9 +1054,15 @@ static int atmel_lcdfb_resume(struct platform_device *pdev)
 	struct atmel_lcdfb_info *sinfo = info->par;
 
 	atmel_lcdfb_start_clock(sinfo);
+	atmel_lcdfb_start(sinfo);
 	if (sinfo->atmel_lcdfb_power_control)
 		sinfo->atmel_lcdfb_power_control(1);
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
+
+	/* Enable FIFO & DMA errors */
+	lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
+			| ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
 	return 0;
 }
 

fs/bfs/dir.c

@@ -125,8 +125,8 @@ static int bfs_create(struct inode *dir, struct dentry *dentry, int mode,
 							inode->i_ino);
 	if (err) {
 		inode_dec_link_count(inode);
-		iput(inode);
 		mutex_unlock(&info->bfs_lock);
+		iput(inode);
 		return err;
 	}
 	mutex_unlock(&info->bfs_lock);

fs/ocfs2/aops.c

@@ -594,7 +594,7 @@ static int ocfs2_direct_IO_get_blocks(struct inode *inode, sector_t iblock,
 		goto bail;
 	}
 
-	if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno) {
+	if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno && create) {
 		ocfs2_error(inode->i_sb,
 			    "Inode %llu has a hole at block %llu\n",
 			    (unsigned long long)OCFS2_I(inode)->ip_blkno,

fs/partitions/check.c

@@ -499,9 +499,9 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 		if (!size)
 			continue;
 		if (from + size > get_capacity(disk)) {
-			printk(KERN_ERR " %s: p%d exceeds device capacity\n",
+			printk(KERN_WARNING
+				"%s: p%d exceeds device capacity\n",
 				disk->disk_name, p);
-			continue;
 		}
 		res = add_partition(disk, p, from, size, state->parts[p].flags);
 		if (res) {

fs/proc/generic.c

@@ -547,8 +547,8 @@ static int proc_register(struct proc_dir_entry * dir, struct proc_dir_entry * dp
 
 	for (tmp = dir->subdir; tmp; tmp = tmp->next)
 		if (strcmp(tmp->name, dp->name) == 0) {
-			printk(KERN_WARNING "proc_dir_entry '%s' already "
-					"registered\n", dp->name);
+			printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
+				dir->name, dp->name);
 			dump_stack();
 			break;
 		}

fs/proc/proc_misc.c

@@ -183,6 +183,9 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		"SReclaimable: %8lu kB\n"
 		"SUnreclaim:   %8lu kB\n"
 		"PageTables:   %8lu kB\n"
+#ifdef CONFIG_QUICKLIST
+		"Quicklists:   %8lu kB\n"
+#endif
 		"NFS_Unstable: %8lu kB\n"
 		"Bounce:       %8lu kB\n"
 		"WritebackTmp: %8lu kB\n"
@@ -190,8 +193,7 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		"Committed_AS: %8lu kB\n"
 		"VmallocTotal: %8lu kB\n"
 		"VmallocUsed:  %8lu kB\n"
-		"VmallocChunk: %8lu kB\n"
-		"Quicklists:   %8lu kB\n",
+		"VmallocChunk: %8lu kB\n",
 		K(i.totalram),
 		K(i.freeram),
 		K(i.bufferram),
@@ -216,6 +218,9 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		K(global_page_state(NR_SLAB_RECLAIMABLE)),
 		K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
 		K(global_page_state(NR_PAGETABLE)),
+#ifdef CONFIG_QUICKLIST
+		K(quicklist_total_size()),
+#endif
 		K(global_page_state(NR_UNSTABLE_NFS)),
 		K(global_page_state(NR_BOUNCE)),
 		K(global_page_state(NR_WRITEBACK_TEMP)),
@@ -223,8 +228,7 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		K(committed),
 		(unsigned long)VMALLOC_TOTAL >> 10,
 		vmi.used >> 10,
-		vmi.largest_chunk >> 10,
-		K(quicklist_total_size())
+		vmi.largest_chunk >> 10
 		);
 
 		len += hugetlb_report_meminfo(page + len);

fs/udf/file.c

@@ -211,6 +211,7 @@ const struct file_operations udf_file_operations = {
 	.release		= udf_release_file,
 	.fsync			= udf_fsync_file,
 	.splice_read		= generic_file_splice_read,
+	.llseek			= generic_file_llseek,
 };
 
 const struct inode_operations udf_file_inode_operations = {

fs/udf/ialloc.c

@@ -76,11 +76,24 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 	*err = -ENOSPC;
 
 	iinfo = UDF_I(inode);
-	iinfo->i_unique = 0;
-	iinfo->i_lenExtents = 0;
-	iinfo->i_next_alloc_block = 0;
-	iinfo->i_next_alloc_goal = 0;
-	iinfo->i_strat4096 = 0;
+	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
+		iinfo->i_efe = 1;
+		if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
+			sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
+		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+					    sizeof(struct extendedFileEntry),
+					    GFP_KERNEL);
+	} else {
+		iinfo->i_efe = 0;
+		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+					    sizeof(struct fileEntry),
+					    GFP_KERNEL);
+	}
+	if (!iinfo->i_ext.i_data) {
+		iput(inode);
+		*err = -ENOMEM;
+		return NULL;
+	}
 
 	block = udf_new_block(dir->i_sb, NULL,
 			      dinfo->i_location.partitionReferenceNum,
@@ -111,6 +124,7 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 		lvhd->uniqueID = cpu_to_le64(uniqueID);
 		mark_buffer_dirty(sbi->s_lvid_bh);
 	}
+	mutex_unlock(&sbi->s_alloc_mutex);
 	inode->i_mode = mode;
 	inode->i_uid = current->fsuid;
 	if (dir->i_mode & S_ISGID) {
@@ -129,25 +143,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 	iinfo->i_lenEAttr = 0;
 	iinfo->i_lenAlloc = 0;
 	iinfo->i_use = 0;
-	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
-		iinfo->i_efe = 1;
-		if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
-			sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
-		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
-					    sizeof(struct extendedFileEntry),
-					    GFP_KERNEL);
-	} else {
-		iinfo->i_efe = 0;
-		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
-					    sizeof(struct fileEntry),
-					    GFP_KERNEL);
-	}
-	if (!iinfo->i_ext.i_data) {
-		iput(inode);
-		*err = -ENOMEM;
-		mutex_unlock(&sbi->s_alloc_mutex);
-		return NULL;
-	}
 	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
 		iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
 	else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
@@ -158,7 +153,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 		iinfo->i_crtime = current_fs_time(inode->i_sb);
 	insert_inode_hash(inode);
 	mark_inode_dirty(inode);
-	mutex_unlock(&sbi->s_alloc_mutex);
 
 	if (DQUOT_ALLOC_INODE(inode)) {
 		DQUOT_DROP(inode);

include/linux/ata.h

@@ -745,7 +745,7 @@ static inline int ata_ok(u8 status)
 static inline int lba_28_ok(u64 block, u32 n_block)
 {
 	/* check the ending block number */
-	return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
+	return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
 }
 
 static inline int lba_48_ok(u64 block, u32 n_block)

include/linux/blkdev.h

@@ -843,8 +843,6 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *);
 */
 extern int blk_verify_command(struct blk_cmd_filter *filter,
 			      unsigned char *cmd, int has_write_perm);
-extern int blk_register_filter(struct gendisk *disk);
-extern void blk_unregister_filter(struct gendisk *disk);
 extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
 
 #define MAX_PHYS_SEGMENTS 128

include/linux/ioport.h

@@ -159,9 +159,9 @@ extern struct resource * __devm_request_region(struct device *dev,
 				struct resource *parent, resource_size_t start,
 				resource_size_t n, const char *name);
 
-#define devm_release_region(start,n) \
+#define devm_release_region(dev, start, n) \
 	__devm_release_region(dev, &ioport_resource, (start), (n))
-#define devm_release_mem_region(start,n) \
+#define devm_release_mem_region(dev, start, n) \
 	__devm_release_region(dev, &iomem_resource, (start), (n))
 
 extern void __devm_release_region(struct device *dev, struct resource *parent,

include/linux/memstick.h

@@ -21,30 +21,30 @@
 struct ms_status_register {
 	unsigned char reserved;
 	unsigned char interrupt;
-#define MEMSTICK_INT_CMDNAK             0x0001
-#define MEMSTICK_INT_IOREQ              0x0008
-#define MEMSTICK_INT_IOBREQ             0x0010
-#define MEMSTICK_INT_BREQ               0x0020
-#define MEMSTICK_INT_ERR                0x0040
-#define MEMSTICK_INT_CED                0x0080
+#define MEMSTICK_INT_CMDNAK 0x01
+#define MEMSTICK_INT_IOREQ  0x08
+#define MEMSTICK_INT_IOBREQ 0x10
+#define MEMSTICK_INT_BREQ   0x20
+#define MEMSTICK_INT_ERR    0x40
+#define MEMSTICK_INT_CED    0x80
 
 	unsigned char status0;
-#define MEMSTICK_STATUS0_WP             0x0001
-#define MEMSTICK_STATUS0_SL             0x0002
-#define MEMSTICK_STATUS0_BF             0x0010
-#define MEMSTICK_STATUS0_BE             0x0020
-#define MEMSTICK_STATUS0_FB0            0x0040
-#define MEMSTICK_STATUS0_MB             0x0080
+#define MEMSTICK_STATUS0_WP  0x01
+#define MEMSTICK_STATUS0_SL  0x02
+#define MEMSTICK_STATUS0_BF  0x10
+#define MEMSTICK_STATUS0_BE  0x20
+#define MEMSTICK_STATUS0_FB0 0x40
+#define MEMSTICK_STATUS0_MB  0x80
 
 	unsigned char status1;
-#define MEMSTICK_STATUS1_UCFG           0x0001
-#define MEMSTICK_STATUS1_FGER           0x0002
-#define MEMSTICK_STATUS1_UCEX           0x0004
-#define MEMSTICK_STATUS1_EXER           0x0008
-#define MEMSTICK_STATUS1_UCDT           0x0010
-#define MEMSTICK_STATUS1_DTER           0x0020
-#define MEMSTICK_STATUS1_FBI            0x0040
-#define MEMSTICK_STATUS1_MB             0x0080
+#define MEMSTICK_STATUS1_UCFG 0x01
+#define MEMSTICK_STATUS1_FGER 0x02
+#define MEMSTICK_STATUS1_UCEX 0x04
+#define MEMSTICK_STATUS1_EXER 0x08
+#define MEMSTICK_STATUS1_UCDT 0x10
+#define MEMSTICK_STATUS1_DTER 0x20
+#define MEMSTICK_STATUS1_FB1  0x40
+#define MEMSTICK_STATUS1_MB   0x80
 } __attribute__((packed));
 
 struct ms_id_register {
@@ -56,32 +56,32 @@ struct ms_id_register {
 
 struct ms_param_register {
 	unsigned char system;
-#define MEMSTICK_SYS_ATEN 0xc0
-#define MEMSTICK_SYS_BAMD 0x80
 #define MEMSTICK_SYS_PAM  0x08
+#define MEMSTICK_SYS_BAMD 0x80
 
 	unsigned char block_address_msb;
 	unsigned short block_address;
 	unsigned char cp;
-#define MEMSTICK_CP_BLOCK               0x0000
-#define MEMSTICK_CP_PAGE                0x0020
-#define MEMSTICK_CP_EXTRA               0x0040
-#define MEMSTICK_CP_OVERWRITE           0x0080
+#define MEMSTICK_CP_BLOCK     0x00
+#define MEMSTICK_CP_PAGE      0x20
+#define MEMSTICK_CP_EXTRA     0x40
+#define MEMSTICK_CP_OVERWRITE 0x80
 
 	unsigned char page_address;
 } __attribute__((packed));
 
 struct ms_extra_data_register {
 	unsigned char  overwrite_flag;
-#define MEMSTICK_OVERWRITE_UPDATA       0x0010
-#define MEMSTICK_OVERWRITE_PAGE         0x0060
-#define MEMSTICK_OVERWRITE_BLOCK        0x0080
+#define MEMSTICK_OVERWRITE_UDST  0x10
+#define MEMSTICK_OVERWRITE_PGST1 0x20
+#define MEMSTICK_OVERWRITE_PGST0 0x40
+#define MEMSTICK_OVERWRITE_BKST  0x80
 
 	unsigned char  management_flag;
-#define MEMSTICK_MANAGEMENT_SYSTEM      0x0004
-#define MEMSTICK_MANAGEMENT_TRANS_TABLE 0x0008
-#define MEMSTICK_MANAGEMENT_COPY        0x0010
-#define MEMSTICK_MANAGEMENT_ACCESS      0x0020
+#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
+#define MEMSTICK_MANAGEMENT_ATFLG  0x08
+#define MEMSTICK_MANAGEMENT_SCMS1  0x10
+#define MEMSTICK_MANAGEMENT_SCMS0  0x20
 
 	unsigned short logical_address;
 } __attribute__((packed));
@@ -96,9 +96,9 @@ struct ms_register {
 
 struct mspro_param_register {
 	unsigned char  system;
-#define MEMSTICK_SYS_SERIAL 0x80
 #define MEMSTICK_SYS_PAR4   0x00
 #define MEMSTICK_SYS_PAR8   0x40
+#define MEMSTICK_SYS_SERIAL 0x80
 
 	unsigned short data_count;
 	unsigned int   data_address;
@@ -147,7 +147,7 @@ struct ms_register_addr {
 	unsigned char w_length;
 } __attribute__((packed));
 
-enum {
+enum memstick_tpc {
 	MS_TPC_READ_MG_STATUS   = 0x01,
 	MS_TPC_READ_LONG_DATA   = 0x02,
 	MS_TPC_READ_SHORT_DATA  = 0x03,
@@ -167,7 +167,7 @@ enum {
 	MS_TPC_SET_CMD          = 0x0e
 };
 
-enum {
+enum memstick_command {
 	MS_CMD_BLOCK_END       = 0x33,
 	MS_CMD_RESET           = 0x3c,
 	MS_CMD_BLOCK_WRITE     = 0x55,
@@ -201,8 +201,6 @@ enum {
 
 /*** Driver structures and functions ***/
 
-#define MEMSTICK_PART_SHIFT 3
-
 enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
 
 #define MEMSTICK_POWER_OFF 0
@@ -215,24 +213,27 @@ enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
 struct memstick_host;
 struct memstick_driver;
 
+struct memstick_device_id {
+	unsigned char match_flags;
 #define MEMSTICK_MATCH_ALL            0x01
 
+	unsigned char type;
 #define MEMSTICK_TYPE_LEGACY          0xff
 #define MEMSTICK_TYPE_DUO             0x00
 #define MEMSTICK_TYPE_PRO             0x01
 
+	unsigned char category;
 #define MEMSTICK_CATEGORY_STORAGE     0xff
 #define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
+#define MEMSTICK_CATEGORY_IO          0x01
+#define MEMSTICK_CATEGORY_IO_PRO      0x10
 
-#define MEMSTICK_CLASS_GENERIC        0xff
-#define MEMSTICK_CLASS_GENERIC_DUO    0x00
-
-
-struct memstick_device_id {
-	unsigned char match_flags;
-	unsigned char type;
-	unsigned char category;
 	unsigned char class;
+#define MEMSTICK_CLASS_FLASH          0xff
+#define MEMSTICK_CLASS_DUO            0x00
+#define MEMSTICK_CLASS_ROM            0x01
+#define MEMSTICK_CLASS_RO             0x02
+#define MEMSTICK_CLASS_WP             0x03
 };
 
 struct memstick_request {
@@ -319,9 +320,9 @@ void memstick_suspend_host(struct memstick_host *host);
 void memstick_resume_host(struct memstick_host *host);
 
 void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
-			  struct scatterlist *sg);
+			  const struct scatterlist *sg);
 void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
-		       void *buf, size_t length);
+		       const void *buf, size_t length);
 int memstick_next_req(struct memstick_host *host,
 		      struct memstick_request **mrq);
 void memstick_new_req(struct memstick_host *host);

include/linux/mmzone.h

@@ -751,8 +751,9 @@ static inline int zonelist_node_idx(struct zoneref *zoneref)
  *
  * This function returns the next zone at or below a given zone index that is
  * within the allowed nodemask using a cursor as the starting point for the
- * search. The zoneref returned is a cursor that is used as the next starting
- * point for future calls to next_zones_zonelist().
+ * search. The zoneref returned is a cursor that represents the current zone
+ * being examined. It should be advanced by one before calling
+ * next_zones_zonelist again.
  */
 struct zoneref *next_zones_zonelist(struct zoneref *z,
 					enum zone_type highest_zoneidx,
@@ -768,9 +769,8 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
  *
  * This function returns the first zone at or below a given zone index that is
  * within the allowed nodemask. The zoneref returned is a cursor that can be
- * used to iterate the zonelist with next_zones_zonelist. The cursor should
- * not be used by the caller as it does not match the value of the zone
- * returned.
+ * used to iterate the zonelist with next_zones_zonelist by advancing it by
+ * one before calling.
  */
 static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
 					enum zone_type highest_zoneidx,
@@ -795,7 +795,7 @@ static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
 #define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
 	for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone);	\
 		zone;							\
-		z = next_zones_zonelist(z, highidx, nodemask, &zone))	\
+		z = next_zones_zonelist(++z, highidx, nodemask, &zone))	\
 
 /**
  * for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index

include/net/netlink.h

@@ -702,7 +702,7 @@ static inline int nla_len(const struct nlattr *nla)
  */
 static inline int nla_ok(const struct nlattr *nla, int remaining)
 {
-	return remaining >= sizeof(*nla) &&
+	return remaining >= (int) sizeof(*nla) &&
 	       nla->nla_len >= sizeof(*nla) &&
 	       nla->nla_len <= remaining;
 }

include/scsi/scsi.h

@@ -308,6 +308,20 @@ struct scsi_lun {
 	__u8 scsi_lun[8];
 };
 
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+	return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
 /*
  *  MESSAGE CODES
  */

kernel/cpuset.c

@@ -843,37 +843,25 @@ static void cpuset_change_cpumask(struct task_struct *tsk,
 /**
  * update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
  * @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
  *
  * Called with cgroup_mutex held
  *
  * The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
  * calling callback functions for each.
  *
- * Return 0 if successful, -errno if not.
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
  */
-static int update_tasks_cpumask(struct cpuset *cs)
+static void update_tasks_cpumask(struct cpuset *cs, struct ptr_heap *heap)
 {
 	struct cgroup_scanner scan;
-	struct ptr_heap heap;
-	int retval;
-
-	/*
-	 * cgroup_scan_tasks() will initialize heap->gt for us.
-	 * heap_init() is still needed here for we should not change
-	 * cs->cpus_allowed when heap_init() fails.
-	 */
-	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
-	if (retval)
-		return retval;
 
 	scan.cg = cs->css.cgroup;
 	scan.test_task = cpuset_test_cpumask;
 	scan.process_task = cpuset_change_cpumask;
-	scan.heap = &heap;
-	retval = cgroup_scan_tasks(&scan);
-
-	heap_free(&heap);
-	return retval;
+	scan.heap = heap;
+	cgroup_scan_tasks(&scan);
 }
 
 /**
@@ -883,6 +871,7 @@ static int update_tasks_cpumask(struct cpuset *cs)
  */
 static int update_cpumask(struct cpuset *cs, const char *buf)
 {
+	struct ptr_heap heap;
 	struct cpuset trialcs;
 	int retval;
 	int is_load_balanced;
@@ -917,6 +906,10 @@ static int update_cpumask(struct cpuset *cs, const char *buf)
 	if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
 		return 0;
 
+	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+	if (retval)
+		return retval;
+
 	is_load_balanced = is_sched_load_balance(&trialcs);
 
 	mutex_lock(&callback_mutex);
@@ -927,9 +920,9 @@ static int update_cpumask(struct cpuset *cs, const char *buf)
 	 * Scan tasks in the cpuset, and update the cpumasks of any
 	 * that need an update.
 	 */
-	retval = update_tasks_cpumask(cs);
-	if (retval < 0)
-		return retval;
+	update_tasks_cpumask(cs, &heap);
+
+	heap_free(&heap);
 
 	if (is_load_balanced)
 		async_rebuild_sched_domains();
@@ -1965,7 +1958,7 @@ static void scan_for_empty_cpusets(const struct cpuset *root)
 		     nodes_empty(cp->mems_allowed))
 			remove_tasks_in_empty_cpuset(cp);
 		else {
-			update_tasks_cpumask(cp);
+			update_tasks_cpumask(cp, NULL);
 			update_tasks_nodemask(cp, &oldmems);
 		}
 	}

lib/scatterlist.c

@@ -422,9 +422,12 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 {
 	unsigned int offset = 0;
 	struct sg_mapping_iter miter;
+	unsigned long flags;
 
 	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
 
+	local_irq_save(flags);
+
 	while (sg_miter_next(&miter) && offset < buflen) {
 		unsigned int len;
 
@@ -442,6 +445,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 	sg_miter_stop(&miter);
 
+	local_irq_restore(flags);
 	return offset;
 }
 

mm/mmzone.c

@@ -69,6 +69,6 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
 				(z->zone && !zref_in_nodemask(z, nodes)))
 			z++;
 
-	*zone = zonelist_zone(z++);
+	*zone = zonelist_zone(z);
 	return z;
 }

net/bluetooth/hci_core.c

@@ -164,6 +164,9 @@ static inline int hci_request(struct hci_dev *hdev, void (*req)(struct hci_dev *
 {
 	int ret;
 
+	if (!test_bit(HCI_UP, &hdev->flags))
+		return -ENETDOWN;
+
 	/* Serialize all requests */
 	hci_req_lock(hdev);
 	ret = __hci_request(hdev, req, opt, timeout);