Merge with /home/shaggy/git/linus-clean/

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>

Documentation/scsi/scsi_mid_low_api.txt

@@ -388,7 +388,6 @@ Summary:
    scsi_remove_device - detach and remove a SCSI device
    scsi_remove_host - detach and remove all SCSI devices owned by host
    scsi_report_bus_reset - report scsi _bus_ reset observed
-   scsi_set_device - place device reference in host structure
    scsi_track_queue_full - track successive QUEUE_FULL events 
    scsi_unblock_requests - allow further commands to be queued to given host
    scsi_unregister - [calls scsi_host_put()]
@@ -740,20 +739,6 @@ int scsi_remove_host(struct Scsi_Host *shost)
 void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
 
 
-/**
- * scsi_set_device - place device reference in host structure
- * @shost: a pointer to a scsi host instance
- * @pdev: pointer to device instance to assign
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Defined in: include/scsi/scsi_host.h .
- **/
-void scsi_set_device(struct Scsi_Host * shost, struct device * dev)
-
-
 /**
  * scsi_track_queue_full - track successive QUEUE_FULL events on given
  *                      device to determine if and when there is a need

MAINTAINERS

@@ -1416,13 +1416,20 @@ W:	http://www.penguinppc.org/
 L:	linuxppc-embedded@ozlabs.org
 S:	Maintained
 
-LINUX FOR POWERPC EMBEDDED PPC8XX AND BOOT CODE
+LINUX FOR POWERPC BOOT CODE
 P:	Tom Rini
 M:	trini@kernel.crashing.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-embedded@ozlabs.org
 S:	Maintained
 
+LINUX FOR POWERPC EMBEDDED PPC8XX
+P:	Marcelo Tosatti
+M:	marcelo.tosatti@cyclades.com
+W:	http://www.penguinppc.org/
+L:	linuxppc-embedded@ozlabs.org
+S:	Maintained
+
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
 P:     Kumar Gala
 M:     kumar.gala@freescale.com

arch/alpha/kernel/process.c

@@ -165,7 +165,6 @@ machine_restart(char *restart_cmd)
 	common_shutdown(LINUX_REBOOT_CMD_RESTART, restart_cmd);
 }
 
-EXPORT_SYMBOL(machine_restart);
 
 void
 machine_halt(void)
@@ -173,7 +172,6 @@ machine_halt(void)
 	common_shutdown(LINUX_REBOOT_CMD_HALT, NULL);
 }
 
-EXPORT_SYMBOL(machine_halt);
 
 void
 machine_power_off(void)
@@ -181,7 +179,6 @@ machine_power_off(void)
 	common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL);
 }
 
-EXPORT_SYMBOL(machine_power_off);
 
 /* Used by sysrq-p, among others.  I don't believe r9-r15 are ever
    saved in the context it's used.  */

arch/arm/kernel/process.c

@@ -131,7 +131,6 @@ void machine_halt(void)
 {
 }
 
-EXPORT_SYMBOL(machine_halt);
 
 void machine_power_off(void)
 {
@@ -139,7 +138,6 @@ void machine_power_off(void)
 		pm_power_off();
 }
 
-EXPORT_SYMBOL(machine_power_off);
 
 void machine_restart(char * __unused)
 {
@@ -169,8 +167,6 @@ void machine_restart(char * __unused)
 	while (1);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void __show_regs(struct pt_regs *regs)
 {
 	unsigned long flags = condition_codes(regs);

arch/arm/mach-s3c2410/Makefile

@@ -23,6 +23,8 @@ obj-$(CONFIG_PM_SIMTEC)	   += pm-simtec.o
 # S3C2440 support
 
 obj-$(CONFIG_CPU_S3C2440)  += s3c2440.o s3c2440-dsc.o
+obj-$(CONFIG_CPU_S3C2440)  += s3c2440-irq.o
+obj-$(CONFIG_CPU_S3C2440)  += s3c2440-clock.o
 
 # machine specific support
 

arch/arm/mach-s3c2410/clock.c

@@ -448,60 +448,3 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
 
 	return 0;
 }
-
-/* S3C2440 extended clock support */
-
-#ifdef CONFIG_CPU_S3C2440
-
-static struct clk s3c2440_clk_upll = {
-	.name		= "upll",
-	.id		= -1,
-};
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.parent		= &clk_h,
-	.id		= -1,
-	.enable		= s3c24xx_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.parent		= &clk_p,
-	.id		= -1,
-	.enable		= s3c24xx_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static int s3c2440_clk_add(struct sys_device *sysdev)
-{
-	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
-
-	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate);
-
-	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
-	       print_mhz(s3c2440_clk_upll.rate));
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_upll);
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_clk_driver = {
-	.add	= s3c2440_clk_add,
-};
-
-static int s3c24xx_clk_driver(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
-}
-
-arch_initcall(s3c24xx_clk_driver);
-
-#endif /* CONFIG_CPU_S3C2440 */

arch/arm/mach-s3c2410/irq.c

@@ -45,6 +45,9 @@
  *
  *   28-Jun-2005  Ben Dooks
  *		  Mark IRQ_LCD valid
+ *
+ *   25-Jul-2005  Ben Dooks
+ *		  Split the S3C2440 IRQ code to seperate file
 */
 
 #include <linux/init.h>
@@ -65,11 +68,7 @@
 
 #include "cpu.h"
 #include "pm.h"
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
+#include "irq.h"
 
 /* wakeup irq control */
 
@@ -181,7 +180,7 @@ s3c_irq_unmask(unsigned int irqno)
 	__raw_writel(mask, S3C2410_INTMSK);
 }
 
-static struct irqchip s3c_irq_level_chip = {
+struct irqchip s3c_irq_level_chip = {
 	.ack	   = s3c_irq_maskack,
 	.mask	   = s3c_irq_mask,
 	.unmask	   = s3c_irq_unmask,
@@ -370,84 +369,6 @@ static struct irqchip s3c_irq_eint0t4 = {
 #define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
 #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
 
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
-		int subcheck)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
-	/* check to see if we need to mask the parent IRQ */
-
-	if ((submask  & subcheck) == subcheck) {
-		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-	}
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-	mask &= ~parentbit;
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	s3c_irqsub_mask(irqno, parentmask, group);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
 
 /* UART0 */
 
@@ -794,174 +715,3 @@ void __init s3c24xx_init_irq(void)
 
 	irqdbf("s3c2410: registered interrupt handlers\n");
 }
-
-/* s3c2440 irq code
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
-				  struct irqdesc *desc,
-				  struct pt_regs *regs)
-{
-	unsigned int subsrc, submsk;
-	struct irqdesc *mydesc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 13;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_S3C2440_WDT;
-			mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_S3C2440_AC97;
-			mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
-		}
-	}
-}
-
-
-#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
-}
-
-static struct irqchip s3c_irq_wdtac97 = {
-	.mask	    = s3c_irq_wdtac97_mask,
-	.unmask	    = s3c_irq_wdtac97_unmask,
-	.ack	    = s3c_irq_wdtac97_ack,
-};
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
-			      struct irqdesc *desc,
-			      struct pt_regs *regs)
-{
-	unsigned int subsrc, submsk;
-	struct irqdesc *mydesc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 11;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_S3C2440_CAM_C;
-			mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_S3C2440_CAM_P;
-			mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
-		}
-	}
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11);
-}
-
-static void
-s3c_irq_cam_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
-}
-
-static struct irqchip s3c_irq_cam = {
-	.mask	    = s3c_irq_cam_mask,
-	.unmask	    = s3c_irq_cam_unmask,
-	.ack	    = s3c_irq_cam_ack,
-};
-
-static int s3c2440_irq_add(struct sys_device *sysdev)
-{
-	unsigned int irqno;
-
-	printk("S3C2440: IRQ Support\n");
-
-	set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_NFCON, do_level_IRQ);
-	set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
-	/* add new chained handler for wdt, ac7 */
-
-	set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_WDT, do_level_IRQ);
-	set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
-	for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
-		set_irq_chip(irqno, &s3c_irq_wdtac97);
-		set_irq_handler(irqno, do_level_IRQ);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	/* add chained handler for camera */
-
-	set_irq_chip(IRQ_CAM, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_CAM, do_level_IRQ);
-	set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
-	for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
-		set_irq_chip(irqno, &s3c_irq_cam);
-		set_irq_handler(irqno, do_level_IRQ);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_irq_driver = {
-	.add	= s3c2440_irq_add,
-};
-
-static int s3c24xx_irq_driver(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
-}
-
-arch_initcall(s3c24xx_irq_driver);
-
-#endif /* CONFIG_CPU_S3C2440 */
-

arch/arm/mach-s3c2410/irq.h

@@ -0,0 +1,99 @@
+/* arch/arm/mach-s3c2410/irq.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+*/
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+#define EXTINT_OFF (IRQ_EINT4 - 4)
+
+extern struct irqchip s3c_irq_level_chip;
+
+static inline void
+s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+		int subcheck)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+
+	/* check to see if we need to mask the parent IRQ */
+
+	if ((submask  & subcheck) == subcheck) {
+		__raw_writel(mask | parentbit, S3C2410_INTMSK);
+	}
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+
+}
+
+static inline void
+s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+	mask &= ~parentbit;
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+
+static inline void
+s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	s3c_irqsub_mask(irqno, parentmask, group);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+static inline void
+s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}

arch/arm/mach-s3c2410/mach-bast.c

@@ -25,10 +25,11 @@
  *     14-Jan-2005 BJD  Add support for muitlple NAND devices
  *     03-Mar-2005 BJD  Ensured that bast-cpld.h is included
  *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     14-Mar-2006 BJD  Updated for __iomem changes
- *     22-Jun-2006 BJD  Added DM9000 platform information
- *     28-Jun-2006 BJD  Moved pm functionality out to common code
- *     17-Jul-2006 BJD  Changed to platform device for SuperIO 16550s
+ *     14-Mar-2005 BJD  Updated for __iomem changes
+ *     22-Jun-2005 BJD  Added DM9000 platform information
+ *     28-Jun-2005 BJD  Moved pm functionality out to common code
+ *     17-Jul-2005 BJD  Changed to platform device for SuperIO 16550s
+ *     25-Jul-2005 BJD  Removed ASIX static mappings
 */
 
 #include <linux/kernel.h>
@@ -116,7 +117,6 @@ static struct map_desc bast_iodesc[] __initdata = {
   /* slow, byte */
   { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C2(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET),  SZ_1M,  MT_DEVICE },
   { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
   { VA_C2(BAST_VA_IDEPRI),  PA_CS3(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
   { VA_C2(BAST_VA_IDESEC),  PA_CS3(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
@@ -126,7 +126,6 @@ static struct map_desc bast_iodesc[] __initdata = {
   /* slow, word */
   { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C3(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET),  SZ_1M,  MT_DEVICE },
   { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
   { VA_C3(BAST_VA_IDEPRI),  PA_CS3(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
   { VA_C3(BAST_VA_IDESEC),  PA_CS3(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
@@ -136,7 +135,6 @@ static struct map_desc bast_iodesc[] __initdata = {
   /* fast, byte */
   { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C4(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET),  SZ_1M,  MT_DEVICE },
   { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
   { VA_C4(BAST_VA_IDEPRI),  PA_CS5(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
   { VA_C4(BAST_VA_IDESEC),  PA_CS5(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
@@ -146,7 +144,6 @@ static struct map_desc bast_iodesc[] __initdata = {
   /* fast, word */
   { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C5(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET),  SZ_1M,  MT_DEVICE },
   { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
   { VA_C5(BAST_VA_IDEPRI),  PA_CS5(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
   { VA_C5(BAST_VA_IDESEC),  PA_CS5(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },

arch/arm/mach-s3c2410/s3c2440-clock.c

@@ -0,0 +1,116 @@
+/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/hardware/clock.h>
+#include <asm/arch/regs-clock.h>
+
+#include "clock.h"
+#include "cpu.h"
+
+/* S3C2440 extended clock support */
+
+static struct clk s3c2440_clk_upll = {
+	.name		= "upll",
+	.id		= -1,
+};
+
+static struct clk s3c2440_clk_cam = {
+	.name		= "camif",
+	.id		= -1,
+	.enable		= s3c24xx_clkcon_enable,
+	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2440_clk_ac97 = {
+	.name		= "ac97",
+	.id		= -1,
+	.enable		= s3c24xx_clkcon_enable,
+	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+};
+
+static int s3c2440_clk_add(struct sys_device *sysdev)
+{
+	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
+	struct clk *clk_h;
+	struct clk *clk_p;
+	struct clk *clk_xtal;
+
+	clk_xtal = clk_get(NULL, "xtal");
+	if (IS_ERR(clk_xtal)) {
+		printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n");
+		return -EINVAL;
+	}
+
+	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate);
+
+	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
+	       print_mhz(s3c2440_clk_upll.rate));
+
+	clk_p = clk_get(NULL, "pclk");
+	clk_h = clk_get(NULL, "hclk");
+
+	if (IS_ERR(clk_p) || IS_ERR(clk_h)) {
+		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
+		return -EINVAL;
+	}
+
+	s3c2440_clk_cam.parent = clk_h;
+	s3c2440_clk_ac97.parent = clk_p;
+
+	s3c24xx_register_clock(&s3c2440_clk_ac97);
+	s3c24xx_register_clock(&s3c2440_clk_cam);
+	s3c24xx_register_clock(&s3c2440_clk_upll);
+
+	clk_disable(&s3c2440_clk_ac97);
+	clk_disable(&s3c2440_clk_cam);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_clk_driver = {
+	.add	= s3c2440_clk_add,
+};
+
+static __init int s3c24xx_clk_driver(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+}
+
+arch_initcall(s3c24xx_clk_driver);

arch/arm/mach-s3c2410/s3c2440-irq.c

@@ -0,0 +1,207 @@
+/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Changelog:
+ *	25-Jul-2005 BJD		Split from irq.c
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "pm.h"
+#include "irq.h"
+
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+				  struct irqdesc *desc,
+				  struct pt_regs *regs)
+{
+	unsigned int subsrc, submsk;
+	struct irqdesc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc &= ~submsk;
+	subsrc >>= 13;
+	subsrc &= 3;
+
+	if (subsrc != 0) {
+		if (subsrc & 1) {
+			mydesc = irq_desc + IRQ_S3C2440_WDT;
+			mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
+		}
+		if (subsrc & 2) {
+			mydesc = irq_desc + IRQ_S3C2440_AC97;
+			mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
+		}
+	}
+}
+
+
+#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13);
+}
+
+static void
+s3c_irq_wdtac97_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
+}
+
+static struct irqchip s3c_irq_wdtac97 = {
+	.mask	    = s3c_irq_wdtac97_mask,
+	.unmask	    = s3c_irq_wdtac97_unmask,
+	.ack	    = s3c_irq_wdtac97_ack,
+};
+
+/* camera irq */
+
+static void s3c_irq_demux_cam(unsigned int irq,
+			      struct irqdesc *desc,
+			      struct pt_regs *regs)
+{
+	unsigned int subsrc, submsk;
+	struct irqdesc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc &= ~submsk;
+	subsrc >>= 11;
+	subsrc &= 3;
+
+	if (subsrc != 0) {
+		if (subsrc & 1) {
+			mydesc = irq_desc + IRQ_S3C2440_CAM_C;
+			mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
+		}
+		if (subsrc & 2) {
+			mydesc = irq_desc + IRQ_S3C2440_CAM_P;
+			mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
+		}
+	}
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+
+static void
+s3c_irq_cam_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11);
+}
+
+static void
+s3c_irq_cam_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_CAM);
+}
+
+static void
+s3c_irq_cam_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
+}
+
+static struct irqchip s3c_irq_cam = {
+	.mask	    = s3c_irq_cam_mask,
+	.unmask	    = s3c_irq_cam_unmask,
+	.ack	    = s3c_irq_cam_ack,
+};
+
+static int s3c2440_irq_add(struct sys_device *sysdev)
+{
+	unsigned int irqno;
+
+	printk("S3C2440: IRQ Support\n");
+
+	set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_NFCON, do_level_IRQ);
+	set_irq_flags(IRQ_NFCON, IRQF_VALID);
+
+	/* add new chained handler for wdt, ac7 */
+
+	set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_WDT, do_level_IRQ);
+	set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+	for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+		set_irq_chip(irqno, &s3c_irq_wdtac97);
+		set_irq_handler(irqno, do_level_IRQ);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	/* add chained handler for camera */
+
+	set_irq_chip(IRQ_CAM, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_CAM, do_level_IRQ);
+	set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+	for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+		set_irq_chip(irqno, &s3c_irq_cam);
+		set_irq_handler(irqno, do_level_IRQ);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_irq_driver = {
+	.add	= s3c2440_irq_add,
+};
+
+static int s3c24xx_irq_driver(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
+}
+
+arch_initcall(s3c24xx_irq_driver);
+

arch/arm/mm/mm-armv.c

@@ -425,6 +425,9 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+
+		mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
+		mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
 	}
 
 	cp = &cache_policies[cachepolicy];

arch/arm26/kernel/process.c

@@ -103,9 +103,6 @@ void machine_power_off(void)
 {
 }
 
-EXPORT_SYMBOL(machine_halt);
-EXPORT_SYMBOL(machine_power_off);
-
 void machine_restart(char * __unused)
 {
 	/*
@@ -136,8 +133,6 @@ void machine_restart(char * __unused)
 	while (1);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void show_regs(struct pt_regs * regs)
 {
 	unsigned long flags;

arch/cris/kernel/process.c

@@ -113,6 +113,7 @@
 #include <linux/user.h>
 #include <linux/elfcore.h>
 #include <linux/mqueue.h>
+#include <linux/reboot.h>
 
 //#define DEBUG
 
@@ -208,13 +209,11 @@ void cpu_idle (void)
 
 void hard_reset_now (void);
 
-void machine_restart(void)
+void machine_restart(char *cmd)
 {
 	hard_reset_now();
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 /*
  * Similar to machine_power_off, but don't shut off power.  Add code
  * here to freeze the system for e.g. post-mortem debug purpose when
@@ -225,16 +224,12 @@ void machine_halt(void)
 {
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 /* If or when software power-off is implemented, add code here.  */
 
 void machine_power_off(void)
 {
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 /*
  * When a process does an "exec", machine state like FPU and debug
  * registers need to be reset.  This is a hook function for that.

arch/h8300/kernel/process.c

@@ -90,8 +90,6 @@ void machine_restart(char * __unused)
 	__asm__("jmp @@0"); 
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt(void)
 {
 	local_irq_disable();
@@ -99,8 +97,6 @@ void machine_halt(void)
 	for (;;);
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
 	local_irq_disable();
@@ -108,8 +104,6 @@ void machine_power_off(void)
 	for (;;);
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 void show_regs(struct pt_regs * regs)
 {
 	printk("\nPC: %08lx  Status: %02x",

arch/i386/kernel/apm.c

@@ -911,14 +911,7 @@ static void apm_power_off(void)
 		0xcd, 0x15		/* int   $0x15       */
 	};
 
-	/*
-	 * This may be called on an SMP machine.
-	 */
-#ifdef CONFIG_SMP
 	/* Some bioses don't like being called from CPU != 0 */
-	set_cpus_allowed(current, cpumask_of_cpu(0));
-	BUG_ON(smp_processor_id() != 0);
-#endif
 	if (apm_info.realmode_power_off)
 	{
 		(void)apm_save_cpus();

arch/i386/kernel/reboot.c

@@ -284,7 +284,7 @@ void machine_shutdown(void)
 	reboot_cpu_id = 0;
 
 	/* See if there has been given a command line override */
-	if ((reboot_cpu_id != -1) && (reboot_cpu < NR_CPUS) &&
+	if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
 		cpu_isset(reboot_cpu, cpu_online_map)) {
 		reboot_cpu_id = reboot_cpu;
 	}
@@ -311,10 +311,8 @@ void machine_shutdown(void)
 #endif
 }
 
-void machine_restart(char * __unused)
+void machine_emergency_restart(void)
 {
-	machine_shutdown();
-
 	if (!reboot_thru_bios) {
 		if (efi_enabled) {
 			efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL);
@@ -337,23 +335,22 @@ void machine_restart(char * __unused)
 	machine_real_restart(jump_to_bios, sizeof(jump_to_bios));
 }
 
-EXPORT_SYMBOL(machine_restart);
+void machine_restart(char * __unused)
+{
+	machine_shutdown();
+	machine_emergency_restart();
+}
 
 void machine_halt(void)
 {
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
-	lapic_shutdown();
+	machine_shutdown();
 
-	if (efi_enabled)
-		efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL);
 	if (pm_power_off)
 		pm_power_off();
 }
 
-EXPORT_SYMBOL(machine_power_off);
 

arch/i386/mach-visws/reboot.c

@@ -22,8 +22,6 @@ void machine_restart(char * __unused)
 	outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_power_off(void)
 {
 	unsigned short pm_status;
@@ -43,10 +41,7 @@ void machine_power_off(void)
 	outl(PIIX_SPECIAL_STOP, 0xCFC);
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 void machine_halt(void)
 {
 }
 
-EXPORT_SYMBOL(machine_halt);

arch/i386/mach-voyager/voyager_basic.c

@@ -278,8 +278,6 @@ machine_restart(char *cmd)
 	}
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void
 mca_nmi_hook(void)
 {
@@ -315,12 +313,9 @@ machine_halt(void)
 	machine_power_off();
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
 	if (pm_power_off)
 		pm_power_off();
 }
 
-EXPORT_SYMBOL(machine_power_off);

arch/ia64/kernel/process.c

@@ -807,16 +807,12 @@ machine_restart (char *restart_cmd)
 	(*efi.reset_system)(EFI_RESET_WARM, 0, 0, NULL);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void
 machine_halt (void)
 {
 	cpu_halt();
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void
 machine_power_off (void)
 {
@@ -825,4 +821,3 @@ machine_power_off (void)
 	machine_halt();
 }
 
-EXPORT_SYMBOL(machine_power_off);

arch/ia64/sn/kernel/xpc_main.c

@@ -420,7 +420,7 @@ xpc_activating(void *__partid)
 	partid_t partid = (u64) __partid;
 	struct xpc_partition *part = &xpc_partitions[partid];
 	unsigned long irq_flags;
-	struct sched_param param = { sched_priority: MAX_USER_RT_PRIO - 1 };
+	struct sched_param param = { sched_priority: MAX_RT_PRIO - 1 };
 	int ret;
 
 

arch/m32r/kernel/process.c

@@ -115,8 +115,6 @@ void machine_restart(char *__unused)
 		cpu_relax();
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt(void)
 {
 	printk("Please push reset button!\n");
@@ -124,15 +122,11 @@ void machine_halt(void)
 		cpu_relax();
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
 	/* M32R_FIXME */
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 static int __init idle_setup (char *str)
 {
 	if (!strncmp(str, "poll", 4)) {

arch/m68k/kernel/process.c

@@ -113,8 +113,6 @@ void machine_restart(char * __unused)
 	for (;;);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt(void)
 {
 	if (mach_halt)
@@ -122,8 +120,6 @@ void machine_halt(void)
 	for (;;);
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
 	if (mach_power_off)
@@ -131,8 +127,6 @@ void machine_power_off(void)
 	for (;;);
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 void show_regs(struct pt_regs * regs)
 {
 	printk("\n");

arch/m68knommu/kernel/process.c

@@ -80,8 +80,6 @@ void machine_restart(char * __unused)
 	for (;;);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt(void)
 {
 	if (mach_halt)
@@ -89,8 +87,6 @@ void machine_halt(void)
 	for (;;);
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
 	if (mach_power_off)
@@ -98,8 +94,6 @@ void machine_power_off(void)
 	for (;;);
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 void show_regs(struct pt_regs * regs)
 {
 	printk(KERN_NOTICE "\n");

arch/mips/kernel/reset.c

@@ -26,18 +26,13 @@ void machine_restart(char *command)
 	_machine_restart(command);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt(void)
 {
 	_machine_halt();
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
 	_machine_power_off();
 }
 
-EXPORT_SYMBOL(machine_power_off);

arch/parisc/kernel/process.c

@@ -150,8 +150,6 @@ void machine_restart(char *cmd)
 
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt(void)
 {
 	/*
@@ -160,8 +158,6 @@ void machine_halt(void)
 	*/
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 
 /*
  * This routine is called from sys_reboot to actually turn off the
@@ -187,8 +183,6 @@ void machine_power_off(void)
 	       KERN_EMERG "Please power this system off now.");
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 
 /*
  * Create a kernel thread

arch/ppc/kernel/setup.c

@@ -121,8 +121,6 @@ void machine_restart(char *cmd)
 	ppc_md.restart(cmd);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_power_off(void)
 {
 #ifdef CONFIG_NVRAM
@@ -131,8 +129,6 @@ void machine_power_off(void)
 	ppc_md.power_off();
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 void machine_halt(void)
 {
 #ifdef CONFIG_NVRAM
@@ -141,8 +137,6 @@ void machine_halt(void)
 	ppc_md.halt();
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void (*pm_power_off)(void) = machine_power_off;
 
 #ifdef CONFIG_TAU

arch/ppc64/kernel/setup.c

@@ -694,7 +694,6 @@ void machine_restart(char *cmd)
 	local_irq_disable();
 	while (1) ;
 }
-EXPORT_SYMBOL(machine_restart);
 
 void machine_power_off(void)
 {
@@ -707,7 +706,6 @@ void machine_power_off(void)
 	local_irq_disable();
 	while (1) ;
 }
-EXPORT_SYMBOL(machine_power_off);
 
 void machine_halt(void)
 {
@@ -720,7 +718,6 @@ void machine_halt(void)
 	local_irq_disable();
 	while (1) ;
 }
-EXPORT_SYMBOL(machine_halt);
 
 static int ppc64_panic_event(struct notifier_block *this,
                              unsigned long event, void *ptr)

arch/s390/kernel/setup.c

@@ -299,24 +299,18 @@ void machine_restart(char *command)
 	_machine_restart(command);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt(void)
 {
 	console_unblank();
 	_machine_halt();
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
 	console_unblank();
 	_machine_power_off();
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 static void __init
 add_memory_hole(unsigned long start, unsigned long end)
 {

arch/sh/kernel/process.c

@@ -80,8 +80,6 @@ void machine_restart(char * __unused)
 		     "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001));
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt(void)
 {
 #if defined(CONFIG_SH_HS7751RVOIP)
@@ -96,8 +94,6 @@ void machine_halt(void)
 		cpu_sleep();
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
 #if defined(CONFIG_SH_HS7751RVOIP)
@@ -110,8 +106,6 @@ void machine_power_off(void)
 #endif
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 void show_regs(struct pt_regs * regs)
 {
 	printk("\n");

arch/sparc/kernel/process.c

@@ -158,8 +158,6 @@ void machine_halt(void)
 	panic("Halt failed!");
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_restart(char * cmd)
 {
 	char *p;
@@ -180,8 +178,6 @@ void machine_restart(char * cmd)
 	panic("Reboot failed!");
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_power_off(void)
 {
 #ifdef CONFIG_SUN_AUXIO
@@ -191,8 +187,6 @@ void machine_power_off(void)
 	machine_halt();
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 static DEFINE_SPINLOCK(sparc_backtrace_lock);
 
 void __show_backtrace(unsigned long fp)

arch/sparc64/kernel/power.c

@@ -69,8 +69,6 @@ void machine_power_off(void)
 	machine_halt();
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 #ifdef CONFIG_PCI
 static int powerd(void *__unused)
 {

arch/sparc64/kernel/process.c

@@ -124,8 +124,6 @@ void machine_halt(void)
 	panic("Halt failed!");
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_alt_power_off(void)
 {
 	if (!serial_console && prom_palette)
@@ -154,8 +152,6 @@ void machine_restart(char * cmd)
 	panic("Reboot failed!");
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 static void show_regwindow32(struct pt_regs *regs)
 {
 	struct reg_window32 __user *rw;

arch/um/kernel/reboot.c

@@ -49,23 +49,17 @@ void machine_restart(char * __unused)
 	CHOOSE_MODE(reboot_tt(), reboot_skas());
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_power_off(void)
 {
         uml_cleanup();
 	CHOOSE_MODE(halt_tt(), halt_skas());
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 void machine_halt(void)
 {
 	machine_power_off();
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 /*
  * Overrides for Emacs so that we follow Linus's tabbing style.
  * Emacs will notice this stuff at the end of the file and automatically

arch/v850/kernel/anna.c

@@ -132,8 +132,6 @@ void machine_restart (char *__unused)
 	asm ("jmp r0"); /* Jump to the reset vector.  */
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt (void)
 {
 #ifdef CONFIG_RESET_GUARD
@@ -145,15 +143,11 @@ void machine_halt (void)
 		asm ("halt; nop; nop; nop; nop; nop");
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off (void)
 {
 	machine_halt ();
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 /* Called before configuring an on-chip UART.  */
 void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
 {

arch/v850/kernel/as85ep1.c

@@ -160,8 +160,6 @@ void machine_restart (char *__unused)
 	asm ("jmp r0"); /* Jump to the reset vector.  */
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt (void)
 {
 #ifdef CONFIG_RESET_GUARD
@@ -173,15 +171,11 @@ void machine_halt (void)
 		asm ("halt; nop; nop; nop; nop; nop");
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off (void)
 {
 	machine_halt ();
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 /* Called before configuring an on-chip UART.  */
 void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
 {

arch/v850/kernel/fpga85e2c.c

@@ -121,22 +121,16 @@ void machine_halt (void)
 	}
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_restart (char *__unused)
 {
 	machine_halt ();
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_power_off (void)
 {
 	machine_halt ();
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 
 /* Interrupts */
 

arch/v850/kernel/rte_cb.c

@@ -67,8 +67,6 @@ void machine_restart (char *__unused)
 	asm ("jmp r0"); /* Jump to the reset vector.  */
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 /* This says `HALt.' in LEDese.  */
 static unsigned char halt_leds_msg[] = { 0x76, 0x77, 0x38, 0xF8 };
 
@@ -89,15 +87,11 @@ void machine_halt (void)
 		asm ("halt; nop; nop; nop; nop; nop");
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off (void)
 {
 	machine_halt ();
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 
 /* Animated LED display for timer tick.  */
 

arch/v850/kernel/sim.c

@@ -104,24 +104,18 @@ void machine_restart (char *__unused)
 	V850_SIM_SYSCALL (exit, 0);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt (void)
 {
 	V850_SIM_SYSCALL (write, 1, "HALT\n", 5);
 	V850_SIM_SYSCALL (exit, 0);
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off (void)
 {
 	V850_SIM_SYSCALL (write, 1, "POWER OFF\n", 10);
 	V850_SIM_SYSCALL (exit, 0);
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 
 /* Load data from a file called NAME into ram.  The address and length
    of the data image are returned in ADDR and LEN.  */

arch/v850/kernel/sim85e2.c

@@ -184,18 +184,13 @@ void machine_halt (void)
 	for (;;) {}
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_restart (char *__unused)
 {
 	machine_halt ();
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_power_off (void)
 {
 	machine_halt ();
 }
 
-EXPORT_SYMBOL(machine_power_off);

arch/x86_64/ia32/ia32entry.S

@@ -591,11 +591,15 @@ ia32_sys_call_table:
 	.quad compat_sys_mq_getsetattr
 	.quad compat_sys_kexec_load	/* reserved for kexec */
 	.quad compat_sys_waitid
-	.quad quiet_ni_syscall		/* sys_altroot */
+	.quad quiet_ni_syscall		/* 285: sys_altroot */
 	.quad sys_add_key
 	.quad sys_request_key
 	.quad sys_keyctl
-	/* don't forget to change IA32_NR_syscalls */
+	.quad sys_ioprio_set
+	.quad sys_ioprio_get		/* 290 */
+	.quad sys_inotify_init
+	.quad sys_inotify_add_watch
+	.quad sys_inotify_rm_watch
 ia32_syscall_end:		
 	.rept IA32_NR_syscalls-(ia32_syscall_end-ia32_sys_call_table)/8
 		.quad ni_syscall

arch/x86_64/ia32/sys_ia32.c

@@ -61,6 +61,7 @@
 #include <linux/ptrace.h>
 #include <linux/highuid.h>
 #include <linux/vmalloc.h>
+#include <linux/fsnotify.h>
 #include <asm/mman.h>
 #include <asm/types.h>
 #include <asm/uaccess.h>
@@ -984,8 +985,10 @@ asmlinkage long sys32_open(const char __user * filename, int flags, int mode)
 			if (IS_ERR(f)) {
 				put_unused_fd(fd); 
 				fd = error;
-			} else
+			} else {
+				fsnotify_open(f->f_dentry);
 				fd_install(fd, f);
+			}
 		}
 		putname(tmp);
 	}

arch/x86_64/kernel/reboot.c

@@ -109,23 +109,10 @@ void machine_shutdown(void)
 	local_irq_enable();
 }
 
-void machine_restart(char * __unused)
+void machine_emergency_restart(void)
 {
 	int i;
 
-	printk("machine restart\n");
-
-	machine_shutdown();
-
-	if (!reboot_force) {
-		local_irq_disable();
-#ifndef CONFIG_SMP
-		disable_local_APIC();
-#endif
-		disable_IO_APIC();
-		local_irq_enable();
-	}
-	
 	/* Tell the BIOS if we want cold or warm reboot */
 	*((unsigned short *)__va(0x472)) = reboot_mode;
        
@@ -150,18 +137,26 @@ void machine_restart(char * __unused)
 	}      
 }
 
-EXPORT_SYMBOL(machine_restart);
+void machine_restart(char * __unused)
+{
+	printk("machine restart\n");
+
+	if (!reboot_force) {
+		machine_shutdown();
+	}
+	machine_emergency_restart();
+}
 
 void machine_halt(void)
 {
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off(void)
 {
+	if (!reboot_force) {
+		machine_shutdown();
+	}
 	if (pm_power_off)
 		pm_power_off();
 }
 
-EXPORT_SYMBOL(machine_power_off);

drivers/acpi/sleep/poweroff.c

@@ -19,8 +19,6 @@
 
 int acpi_sleep_prepare(u32 acpi_state)
 {
-	/* Flag to do not allow second time invocation for S5 state */
-	static int shutdown_prepared = 0;
 #ifdef CONFIG_ACPI_SLEEP
 	/* do we have a wakeup address for S2 and S3? */
 	/* Here, we support only S4BIOS, those we set the wakeup address */
@@ -38,28 +36,23 @@ int acpi_sleep_prepare(u32 acpi_state)
 	acpi_enable_wakeup_device_prep(acpi_state);
 #endif
 	if (acpi_state == ACPI_STATE_S5) {
-		/* Check if we were already called */
-		if (shutdown_prepared)
-			return 0;
 		acpi_wakeup_gpe_poweroff_prepare();
-		shutdown_prepared = 1;
 	}
 	acpi_enter_sleep_state_prep(acpi_state);
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
 void acpi_power_off(void)
 {
+	/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 	printk("%s called\n", __FUNCTION__);
-	acpi_sleep_prepare(ACPI_STATE_S5);
 	local_irq_disable();
 	/* Some SMP machines only can poweroff in boot CPU */
-	set_cpus_allowed(current, cpumask_of_cpu(0));
 	acpi_enter_sleep_state(ACPI_STATE_S5);
 }
 
-#ifdef CONFIG_PM
-
 static int acpi_shutdown(struct sys_device *x)
 {
 	return acpi_sleep_prepare(ACPI_STATE_S5);
@@ -75,8 +68,6 @@ static struct sys_device device_acpi = {
 	.cls = &acpi_sysclass,
 };
 
-#endif
-
 static int acpi_poweroff_init(void)
 {
 	if (!acpi_disabled) {
@@ -86,19 +77,18 @@ static int acpi_poweroff_init(void)
 		status =
 		    acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 		if (ACPI_SUCCESS(status)) {
-			pm_power_off = acpi_power_off;
-#ifdef CONFIG_PM
-			{
-				int error;
-				error = sysdev_class_register(&acpi_sysclass);
-				if (!error)
-					error = sysdev_register(&device_acpi);
-				return error;
-			}
-#endif
+			int error;
+			error = sysdev_class_register(&acpi_sysclass);
+			if (!error)
+				error = sysdev_register(&device_acpi);
+			if (!error)
+				pm_power_off = acpi_power_off;
+			return error;
 		}
 	}
 	return 0;
 }
 
 late_initcall(acpi_poweroff_init);
+
+#endif /* CONFIG_PM */

drivers/char/hangcheck-timer.c

@@ -173,7 +173,7 @@ static void hangcheck_fire(unsigned long data)
 		}
 		if (hangcheck_reboot) {
 			printk(KERN_CRIT "Hangcheck: hangcheck is restarting the machine.\n");
-			machine_restart(NULL);
+			emergency_restart();
 		} else {
 			printk(KERN_CRIT "Hangcheck: hangcheck value past margin!\n");
 		}

drivers/char/sysrq.c

@@ -115,7 +115,7 @@ static void sysrq_handle_reboot(int key, struct pt_regs *pt_regs,
 				struct tty_struct *tty) 
 {
 	local_irq_enable();
-	machine_restart(NULL);
+	emergency_restart();
 }
 
 static struct sysrq_key_op sysrq_reboot_op = {

drivers/char/watchdog/eurotechwdt.c

@@ -167,7 +167,7 @@ static irqreturn_t eurwdt_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	printk(KERN_CRIT "Would Reboot.\n");
 #else
 	printk(KERN_CRIT "Initiating system reboot.\n");
-	machine_restart(NULL);
+	emergency_restart();
 #endif
 	return IRQ_HANDLED;
 }

drivers/char/watchdog/pcwd.c

@@ -344,7 +344,7 @@ static int pcwd_get_status(int *status)
 			*status |= WDIOF_OVERHEAT;
 			if (temp_panic) {
 				printk (KERN_INFO PFX "Temperature overheat trip!\n");
-				machine_power_off();
+				kernel_power_off();
 			}
 		}
 	} else {
@@ -355,7 +355,7 @@ static int pcwd_get_status(int *status)
 			*status |= WDIOF_OVERHEAT;
 			if (temp_panic) {
 				printk (KERN_INFO PFX "Temperature overheat trip!\n");
-				machine_power_off();
+				kernel_power_off();
 			}
 		}
 	}

drivers/char/watchdog/softdog.c

@@ -97,7 +97,7 @@ static void watchdog_fire(unsigned long data)
 	else
 	{
 		printk(KERN_CRIT PFX "Initiating system reboot.\n");
-		machine_restart(NULL);
+		emergency_restart();
 		printk(KERN_CRIT PFX "Reboot didn't ?????\n");
 	}
 }

drivers/char/watchdog/wdt.c

@@ -266,7 +266,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		printk(KERN_CRIT "Would Reboot.\n");
 #else
 		printk(KERN_CRIT "Initiating system reboot.\n");
-		machine_restart(NULL);
+		emergency_restart();
 #endif
 #else
 		printk(KERN_CRIT "Reset in 5ms.\n");

drivers/char/watchdog/wdt_pci.c

@@ -311,7 +311,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		printk(KERN_CRIT PFX "Would Reboot.\n");
 #else
 		printk(KERN_CRIT PFX "Initiating system reboot.\n");
-		machine_restart(NULL);
+		emergency_restart(NULL);
 #endif
 #else
 		printk(KERN_CRIT PFX "Reset in 5ms.\n");

drivers/fc4/fc.c

@@ -365,6 +365,7 @@ void fcp_register(fc_channel *fc, u8 type, int unregister)
 			kfree (fc->scsi_bitmap);
 			kfree (fc->cmd_slots);
 			FCND(("Unregistering\n"));
+#if 0
 			if (fc->rst_pkt) {
 				if (fc->rst_pkt->eh_state == SCSI_STATE_UNUSED)
 					kfree(fc->rst_pkt);
@@ -373,6 +374,7 @@ void fcp_register(fc_channel *fc, u8 type, int unregister)
 					printk("FC: Reset in progress. Now?!");
 				}
 			}
+#endif
 			FCND(("Unregistered\n"));
 		}
 	} else
@@ -915,6 +917,7 @@ int fcp_scsi_abort(Scsi_Cmnd *SCpnt)
 	}
 }
 
+#if 0
 void fcp_scsi_reset_done(Scsi_Cmnd *SCpnt)
 {
 	fc_channel *fc = FC_SCMND(SCpnt);
@@ -922,11 +925,13 @@ void fcp_scsi_reset_done(Scsi_Cmnd *SCpnt)
 	fc->rst_pkt->eh_state = SCSI_STATE_FINISHED;
 	up(fc->rst_pkt->device->host->eh_action);
 }
+#endif
 
 #define FCP_RESET_TIMEOUT (2*HZ)
 
 int fcp_scsi_dev_reset(Scsi_Cmnd *SCpnt)
 {
+#if 0 /* broken junk, but if davem wants to compile this driver, let him.. */
 	unsigned long flags;
 	fcp_cmd *cmd;
 	fcp_cmnd *fcmd;
@@ -1000,6 +1005,7 @@ int fcp_scsi_dev_reset(Scsi_Cmnd *SCpnt)
 	}
 	fc->rst_pkt->eh_state = SCSI_STATE_UNUSED;
 	return SUCCESS;
+#endif
 }
 
 static int __fcp_scsi_host_reset(Scsi_Cmnd *SCpnt)

drivers/message/fusion/mptfc.c

@@ -83,19 +83,6 @@ static int	mptfcDoneCtx = -1;
 static int	mptfcTaskCtx = -1;
 static int	mptfcInternalCtx = -1; /* Used only for internal commands */
 
-static struct device_attribute mptfc_queue_depth_attr = {
-	.attr = {
-		.name = 	"queue_depth",
-		.mode =		S_IWUSR,
-	},
-	.store = mptscsih_store_queue_depth,
-};
-
-static struct device_attribute *mptfc_dev_attrs[] = {
-	&mptfc_queue_depth_attr,
-	NULL,
-};
-
 static struct scsi_host_template mptfc_driver_template = {
 	.proc_name			= "mptfc",
 	.proc_info			= mptscsih_proc_info,
@@ -105,6 +92,7 @@ static struct scsi_host_template mptfc_driver_template = {
 	.slave_alloc			= mptscsih_slave_alloc,
 	.slave_configure		= mptscsih_slave_configure,
 	.slave_destroy			= mptscsih_slave_destroy,
+	.change_queue_depth 		= mptscsih_change_queue_depth,
 	.eh_abort_handler		= mptscsih_abort,
 	.eh_device_reset_handler	= mptscsih_dev_reset,
 	.eh_bus_reset_handler		= mptscsih_bus_reset,
@@ -116,7 +104,6 @@ static struct scsi_host_template mptfc_driver_template = {
 	.max_sectors			= 8192,
 	.cmd_per_lun			= 7,
 	.use_clustering			= ENABLE_CLUSTERING,
-	.sdev_attrs			= mptfc_dev_attrs,
 };
 
 /****************************************************************************
@@ -267,10 +254,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		sh->sg_tablesize = numSGE;
 	}
 
-	/* Set the pci device pointer in Scsi_Host structure.
-	 */
-	scsi_set_device(sh, &ioc->pcidev->dev);
-
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 
 	hd = (MPT_SCSI_HOST *) sh->hostdata;

drivers/message/fusion/mptscsih.c

@@ -2234,13 +2234,27 @@ mptscsih_slave_destroy(struct scsi_device *device)
 	}
 }
 
-static void
-mptscsih_set_queue_depth(struct scsi_device *device, MPT_SCSI_HOST *hd,
-	VirtDevice *pTarget, int qdepth)
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ *	mptscsih_change_queue_depth - This function will set a devices queue depth
+ *	@sdev: per scsi_device pointer
+ *	@qdepth: requested queue depth
+ *
+ *	Adding support for new 'change_queue_depth' api.
+*/
+int
+mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 {
+	MPT_SCSI_HOST	*hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
+	VirtDevice *pTarget;
 	int	max_depth;
 	int	tagged;
 
+	if (hd == NULL)
+		return 0;
+	if (!(pTarget = hd->Targets[sdev->id]))
+		return 0;
+
 	if (hd->ioc->bus_type == SCSI) {
 		if (pTarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) {
 			if (!(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES))
@@ -2264,10 +2278,10 @@ mptscsih_set_queue_depth(struct scsi_device *device, MPT_SCSI_HOST *hd,
 	else
 		tagged = MSG_SIMPLE_TAG;
 
-	scsi_adjust_queue_depth(device, tagged, qdepth);
+	scsi_adjust_queue_depth(sdev, tagged, qdepth);
+	return sdev->queue_depth;
 }
 
-
 /*
  *	OS entry point to adjust the queue_depths on a per-device basis.
  *	Called once per device the bus scan. Use it to force the queue_depth
@@ -2317,7 +2331,7 @@ mptscsih_slave_configure(struct scsi_device *device)
 
 	mptscsih_initTarget(hd, device->channel, device->id, device->lun,
 		device->inquiry, device->inquiry_len );
-	mptscsih_set_queue_depth(device, hd, pTarget, MPT_SCSI_CMD_PER_DEV_HIGH);
+	mptscsih_change_queue_depth(device, MPT_SCSI_CMD_PER_DEV_HIGH);
 
 	dsprintk((MYIOC_s_INFO_FMT
 		"Queue depth=%d, tflags=%x\n",
@@ -2337,25 +2351,6 @@ slave_configure_exit:
 	return 0;
 }
 
-ssize_t
-mptscsih_store_queue_depth(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int			 depth;
-	struct scsi_device	*sdev = to_scsi_device(dev);
-	MPT_SCSI_HOST		*hd = (MPT_SCSI_HOST *) sdev->host->hostdata;
-	VirtDevice		*pTarget;
-
-	depth = simple_strtoul(buf, NULL, 0);
-	if (depth == 0)
-		return -EINVAL;
-	pTarget = hd->Targets[sdev->id];
-	if (pTarget == NULL)
-		return -EINVAL;
-	mptscsih_set_queue_depth(sdev, (MPT_SCSI_HOST *) sdev->host->hostdata,
-		pTarget, depth);
-	return count;
-}
-
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  *  Private routines...
@@ -5586,7 +5581,7 @@ EXPORT_SYMBOL(mptscsih_taskmgmt_complete);
 EXPORT_SYMBOL(mptscsih_scandv_complete);
 EXPORT_SYMBOL(mptscsih_event_process);
 EXPORT_SYMBOL(mptscsih_ioc_reset);
-EXPORT_SYMBOL(mptscsih_store_queue_depth);
+EXPORT_SYMBOL(mptscsih_change_queue_depth);
 EXPORT_SYMBOL(mptscsih_timer_expired);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/

drivers/message/fusion/mptscsih.h

@@ -103,5 +103,5 @@ extern int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_F
 extern int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
 extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
 extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
-extern ssize_t mptscsih_store_queue_depth(struct device *dev, struct device_attribute *attr, const char *buf, size_t count);
+extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
 extern void mptscsih_timer_expired(unsigned long data);

drivers/message/fusion/mptspi.c

@@ -102,19 +102,6 @@ static int	mptspiDoneCtx = -1;
 static int	mptspiTaskCtx = -1;
 static int	mptspiInternalCtx = -1; /* Used only for internal commands */
 
-static struct device_attribute mptspi_queue_depth_attr = {
-	.attr = {
-		.name = 	"queue_depth",
-		.mode =		S_IWUSR,
-	},
-	.store = mptscsih_store_queue_depth,
-};
-
-static struct device_attribute *mptspi_dev_attrs[] = {
-	&mptspi_queue_depth_attr,
-	NULL,
-};
-
 static struct scsi_host_template mptspi_driver_template = {
 	.proc_name			= "mptspi",
 	.proc_info			= mptscsih_proc_info,
@@ -124,6 +111,7 @@ static struct scsi_host_template mptspi_driver_template = {
 	.slave_alloc			= mptscsih_slave_alloc,
 	.slave_configure		= mptscsih_slave_configure,
 	.slave_destroy			= mptscsih_slave_destroy,
+	.change_queue_depth 		= mptscsih_change_queue_depth,
 	.eh_abort_handler		= mptscsih_abort,
 	.eh_device_reset_handler	= mptscsih_dev_reset,
 	.eh_bus_reset_handler		= mptscsih_bus_reset,
@@ -135,7 +123,6 @@ static struct scsi_host_template mptspi_driver_template = {
 	.max_sectors			= 8192,
 	.cmd_per_lun			= 7,
 	.use_clustering			= ENABLE_CLUSTERING,
-	.sdev_attrs			= mptspi_dev_attrs,
 };
 
 
@@ -287,10 +274,6 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		sh->sg_tablesize = numSGE;
 	}
 
-	/* Set the pci device pointer in Scsi_Host structure.
-	 */
-	scsi_set_device(sh, &ioc->pcidev->dev);
-
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 
 	hd = (MPT_SCSI_HOST *) sh->hostdata;

drivers/net/tg3.c

@@ -66,8 +66,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.33"
-#define DRV_MODULE_RELDATE	"July 5, 2005"
+#define DRV_MODULE_VERSION	"3.34"
+#define DRV_MODULE_RELDATE	"July 25, 2005"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -90,7 +90,7 @@
 /* hardware minimum and maximum for a single frame's data payload */
 #define TG3_MIN_MTU			60
 #define TG3_MAX_MTU(tp)	\
-	(!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ? 9000 : 1500)
+	((tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) ? 9000 : 1500)
 
 /* These numbers seem to be hard coded in the NIC firmware somehow.
  * You can't change the ring sizes, but you can change where you place
@@ -221,6 +221,10 @@ static struct pci_device_id tg3_pci_tbl[] = {
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753F,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780S,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5781,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX,
@@ -508,6 +512,9 @@ static void tg3_switch_clocks(struct tg3 *tp)
 	u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
 	u32 orig_clock_ctrl;
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+		return;
+
 	orig_clock_ctrl = clock_ctrl;
 	clock_ctrl &= (CLOCK_CTRL_FORCE_CLKRUN |
 		       CLOCK_CTRL_CLKRUN_OENABLE |
@@ -907,7 +914,7 @@ out:
 	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
 		/* Cannot do read-modify-write on 5401 */
 		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
-	} else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+	} else if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
 		u32 phy_reg;
 
 		/* Set bit 14 with read-modify-write to preserve other bits */
@@ -919,7 +926,7 @@ out:
 	/* Set phy register 0x10 bit 0 to high fifo elasticity to support
 	 * jumbo frames transmission.
 	 */
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+	if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
 		u32 phy_reg;
 
 		if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &phy_reg))
@@ -1093,7 +1100,7 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
 		tp->link_config.orig_autoneg = tp->link_config.autoneg;
 	}
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
+	if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
 		tp->link_config.speed = SPEED_10;
 		tp->link_config.duplex = DUPLEX_HALF;
 		tp->link_config.autoneg = AUTONEG_ENABLE;
@@ -1145,6 +1152,8 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
 		     CLOCK_CTRL_ALTCLK |
 		     CLOCK_CTRL_PWRDOWN_PLL133);
 		udelay(40);
+	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+		/* do nothing */
 	} else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
 		     (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) {
 		u32 newbits1, newbits2;
@@ -1238,6 +1247,25 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv
 	u32 old_tx_mode = tp->tx_mode;
 
 	if (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) {
+
+		/* Convert 1000BaseX flow control bits to 1000BaseT
+		 * bits before resolving flow control.
+		 */
+		if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
+			local_adv &= ~(ADVERTISE_PAUSE_CAP |
+				       ADVERTISE_PAUSE_ASYM);
+			remote_adv &= ~(LPA_PAUSE_CAP | LPA_PAUSE_ASYM);
+
+			if (local_adv & ADVERTISE_1000XPAUSE)
+				local_adv |= ADVERTISE_PAUSE_CAP;
+			if (local_adv & ADVERTISE_1000XPSE_ASYM)
+				local_adv |= ADVERTISE_PAUSE_ASYM;
+			if (remote_adv & LPA_1000XPAUSE)
+				remote_adv |= LPA_PAUSE_CAP;
+			if (remote_adv & LPA_1000XPAUSE_ASYM)
+				remote_adv |= LPA_PAUSE_ASYM;
+		}
+
 		if (local_adv & ADVERTISE_PAUSE_CAP) {
 			if (local_adv & ADVERTISE_PAUSE_ASYM) {
 				if (remote_adv & LPA_PAUSE_CAP)
@@ -2498,12 +2526,226 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
 	return 0;
 }
 
+static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
+{
+	int current_link_up, err = 0;
+	u32 bmsr, bmcr;
+	u16 current_speed;
+	u8 current_duplex;
+
+	tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+	tw32_f(MAC_MODE, tp->mac_mode);
+	udelay(40);
+
+	tw32(MAC_EVENT, 0);
+
+	tw32_f(MAC_STATUS,
+	     (MAC_STATUS_SYNC_CHANGED |
+	      MAC_STATUS_CFG_CHANGED |
+	      MAC_STATUS_MI_COMPLETION |
+	      MAC_STATUS_LNKSTATE_CHANGED));
+	udelay(40);
+
+	if (force_reset)
+		tg3_phy_reset(tp);
+
+	current_link_up = 0;
+	current_speed = SPEED_INVALID;
+	current_duplex = DUPLEX_INVALID;
+
+	err |= tg3_readphy(tp, MII_BMSR, &bmsr);
+	err |= tg3_readphy(tp, MII_BMSR, &bmsr);
+
+	err |= tg3_readphy(tp, MII_BMCR, &bmcr);
+
+	if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset &&
+	    (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
+		/* do nothing, just check for link up at the end */
+	} else if (tp->link_config.autoneg == AUTONEG_ENABLE) {
+		u32 adv, new_adv;
+
+		err |= tg3_readphy(tp, MII_ADVERTISE, &adv);
+		new_adv = adv & ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF |
+				  ADVERTISE_1000XPAUSE |
+				  ADVERTISE_1000XPSE_ASYM |
+				  ADVERTISE_SLCT);
+
+		/* Always advertise symmetric PAUSE just like copper */
+		new_adv |= ADVERTISE_1000XPAUSE;
+
+		if (tp->link_config.advertising & ADVERTISED_1000baseT_Half)
+			new_adv |= ADVERTISE_1000XHALF;
+		if (tp->link_config.advertising & ADVERTISED_1000baseT_Full)
+			new_adv |= ADVERTISE_1000XFULL;
+
+		if ((new_adv != adv) || !(bmcr & BMCR_ANENABLE)) {
+			tg3_writephy(tp, MII_ADVERTISE, new_adv);
+			bmcr |= BMCR_ANENABLE | BMCR_ANRESTART;
+			tg3_writephy(tp, MII_BMCR, bmcr);
+
+			tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED);
+			tp->tg3_flags2 |= TG3_FLG2_PHY_JUST_INITTED;
+			tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
+
+			return err;
+		}
+	} else {
+		u32 new_bmcr;
+
+		bmcr &= ~BMCR_SPEED1000;
+		new_bmcr = bmcr & ~(BMCR_ANENABLE | BMCR_FULLDPLX);
+
+		if (tp->link_config.duplex == DUPLEX_FULL)
+			new_bmcr |= BMCR_FULLDPLX;
+
+		if (new_bmcr != bmcr) {
+			/* BMCR_SPEED1000 is a reserved bit that needs
+			 * to be set on write.
+			 */
+			new_bmcr |= BMCR_SPEED1000;
+
+			/* Force a linkdown */
+			if (netif_carrier_ok(tp->dev)) {
+				u32 adv;
+
+				err |= tg3_readphy(tp, MII_ADVERTISE, &adv);
+				adv &= ~(ADVERTISE_1000XFULL |
+					 ADVERTISE_1000XHALF |
+					 ADVERTISE_SLCT);
+				tg3_writephy(tp, MII_ADVERTISE, adv);
+				tg3_writephy(tp, MII_BMCR, bmcr |
+							   BMCR_ANRESTART |
+							   BMCR_ANENABLE);
+				udelay(10);
+				netif_carrier_off(tp->dev);
+			}
+			tg3_writephy(tp, MII_BMCR, new_bmcr);
+			bmcr = new_bmcr;
+			err |= tg3_readphy(tp, MII_BMSR, &bmsr);
+			err |= tg3_readphy(tp, MII_BMSR, &bmsr);
+			tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
+		}
+	}
+
+	if (bmsr & BMSR_LSTATUS) {
+		current_speed = SPEED_1000;
+		current_link_up = 1;
+		if (bmcr & BMCR_FULLDPLX)
+			current_duplex = DUPLEX_FULL;
+		else
+			current_duplex = DUPLEX_HALF;
+
+		if (bmcr & BMCR_ANENABLE) {
+			u32 local_adv, remote_adv, common;
+
+			err |= tg3_readphy(tp, MII_ADVERTISE, &local_adv);
+			err |= tg3_readphy(tp, MII_LPA, &remote_adv);
+			common = local_adv & remote_adv;
+			if (common & (ADVERTISE_1000XHALF |
+				      ADVERTISE_1000XFULL)) {
+				if (common & ADVERTISE_1000XFULL)
+					current_duplex = DUPLEX_FULL;
+				else
+					current_duplex = DUPLEX_HALF;
+
+				tg3_setup_flow_control(tp, local_adv,
+						       remote_adv);
+			}
+			else
+				current_link_up = 0;
+		}
+	}
+
+	tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
+	if (tp->link_config.active_duplex == DUPLEX_HALF)
+		tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
+
+	tw32_f(MAC_MODE, tp->mac_mode);
+	udelay(40);
+
+	tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED);
+
+	tp->link_config.active_speed = current_speed;
+	tp->link_config.active_duplex = current_duplex;
+
+	if (current_link_up != netif_carrier_ok(tp->dev)) {
+		if (current_link_up)
+			netif_carrier_on(tp->dev);
+		else {
+			netif_carrier_off(tp->dev);
+			tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
+		}
+		tg3_link_report(tp);
+	}
+	return err;
+}
+
+static void tg3_serdes_parallel_detect(struct tg3 *tp)
+{
+	if (tp->tg3_flags2 & TG3_FLG2_PHY_JUST_INITTED) {
+		/* Give autoneg time to complete. */
+		tp->tg3_flags2 &= ~TG3_FLG2_PHY_JUST_INITTED;
+		return;
+	}
+	if (!netif_carrier_ok(tp->dev) &&
+	    (tp->link_config.autoneg == AUTONEG_ENABLE)) {
+		u32 bmcr;
+
+		tg3_readphy(tp, MII_BMCR, &bmcr);
+		if (bmcr & BMCR_ANENABLE) {
+			u32 phy1, phy2;
+
+			/* Select shadow register 0x1f */
+			tg3_writephy(tp, 0x1c, 0x7c00);
+			tg3_readphy(tp, 0x1c, &phy1);
+
+			/* Select expansion interrupt status register */
+			tg3_writephy(tp, 0x17, 0x0f01);
+			tg3_readphy(tp, 0x15, &phy2);
+			tg3_readphy(tp, 0x15, &phy2);
+
+			if ((phy1 & 0x10) && !(phy2 & 0x20)) {
+				/* We have signal detect and not receiving
+				 * config code words, link is up by parallel
+				 * detection.
+				 */
+
+				bmcr &= ~BMCR_ANENABLE;
+				bmcr |= BMCR_SPEED1000 | BMCR_FULLDPLX;
+				tg3_writephy(tp, MII_BMCR, bmcr);
+				tp->tg3_flags2 |= TG3_FLG2_PARALLEL_DETECT;
+			}
+		}
+	}
+	else if (netif_carrier_ok(tp->dev) &&
+		 (tp->link_config.autoneg == AUTONEG_ENABLE) &&
+		 (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
+		u32 phy2;
+
+		/* Select expansion interrupt status register */
+		tg3_writephy(tp, 0x17, 0x0f01);
+		tg3_readphy(tp, 0x15, &phy2);
+		if (phy2 & 0x20) {
+			u32 bmcr;
+
+			/* Config code words received, turn on autoneg. */
+			tg3_readphy(tp, MII_BMCR, &bmcr);
+			tg3_writephy(tp, MII_BMCR, bmcr | BMCR_ANENABLE);
+
+			tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
+
+		}
+	}
+}
+
 static int tg3_setup_phy(struct tg3 *tp, int force_reset)
 {
 	int err;
 
 	if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
 		err = tg3_setup_fiber_phy(tp, force_reset);
+	} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
+		err = tg3_setup_fiber_mii_phy(tp, force_reset);
 	} else {
 		err = tg3_setup_copper_phy(tp, force_reset);
 	}
@@ -2612,7 +2854,7 @@ static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key,
 		map = &tp->rx_std_buffers[dest_idx];
 		if (src_idx >= 0)
 			src_map = &tp->rx_std_buffers[src_idx];
-		skb_size = RX_PKT_BUF_SZ;
+		skb_size = tp->rx_pkt_buf_sz;
 		break;
 
 	case RXD_OPAQUE_RING_JUMBO:
@@ -3434,10 +3676,18 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
 {
 	dev->mtu = new_mtu;
 
-	if (new_mtu > ETH_DATA_LEN)
-		tp->tg3_flags |= TG3_FLAG_JUMBO_ENABLE;
-	else
-		tp->tg3_flags &= ~TG3_FLAG_JUMBO_ENABLE;
+	if (new_mtu > ETH_DATA_LEN) {
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+			tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
+			ethtool_op_set_tso(dev, 0);
+		}
+		else
+			tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
+	} else {
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+			tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
+		tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE;
+	}
 }
 
 static int tg3_change_mtu(struct net_device *dev, int new_mtu)
@@ -3491,7 +3741,7 @@ static void tg3_free_rings(struct tg3 *tp)
 			continue;
 		pci_unmap_single(tp->pdev,
 				 pci_unmap_addr(rxp, mapping),
-				 RX_PKT_BUF_SZ - tp->rx_offset,
+				 tp->rx_pkt_buf_sz - tp->rx_offset,
 				 PCI_DMA_FROMDEVICE);
 		dev_kfree_skb_any(rxp->skb);
 		rxp->skb = NULL;
@@ -3564,6 +3814,11 @@ static void tg3_init_rings(struct tg3 *tp)
 	memset(tp->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
 	memset(tp->tx_ring, 0, TG3_TX_RING_BYTES);
 
+	tp->rx_pkt_buf_sz = RX_PKT_BUF_SZ;
+	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) &&
+	    (tp->dev->mtu > ETH_DATA_LEN))
+		tp->rx_pkt_buf_sz = RX_JUMBO_PKT_BUF_SZ;
+
 	/* Initialize invariants of the rings, we only set this
 	 * stuff once.  This works because the card does not
 	 * write into the rx buffer posting rings.
@@ -3572,14 +3827,14 @@ static void tg3_init_rings(struct tg3 *tp)
 		struct tg3_rx_buffer_desc *rxd;
 
 		rxd = &tp->rx_std[i];
-		rxd->idx_len = (RX_PKT_BUF_SZ - tp->rx_offset - 64)
+		rxd->idx_len = (tp->rx_pkt_buf_sz - tp->rx_offset - 64)
 			<< RXD_LEN_SHIFT;
 		rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT);
 		rxd->opaque = (RXD_OPAQUE_RING_STD |
 			       (i << RXD_OPAQUE_INDEX_SHIFT));
 	}
 
-	if (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) {
+	if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
 		for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
 			struct tg3_rx_buffer_desc *rxd;
 
@@ -3600,7 +3855,7 @@ static void tg3_init_rings(struct tg3 *tp)
 			break;
 	}
 
-	if (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) {
+	if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
 		for (i = 0; i < tp->rx_jumbo_pending; i++) {
 			if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_JUMBO,
 					     -1, i) < 0)
@@ -4056,7 +4311,30 @@ static int tg3_chip_reset(struct tg3 *tp)
 	val &= ~PCIX_CAPS_RELAXED_ORDERING;
 	pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val);
 
-	tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+		u32 val;
+
+		/* Chip reset on 5780 will reset MSI enable bit,
+		 * so need to restore it.
+		 */
+		if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
+			u16 ctrl;
+
+			pci_read_config_word(tp->pdev,
+					     tp->msi_cap + PCI_MSI_FLAGS,
+					     &ctrl);
+			pci_write_config_word(tp->pdev,
+					      tp->msi_cap + PCI_MSI_FLAGS,
+					      ctrl | PCI_MSI_FLAGS_ENABLE);
+			val = tr32(MSGINT_MODE);
+			tw32(MSGINT_MODE, val | MSGINT_MODE_ENABLE);
+		}
+
+		val = tr32(MEMARB_MODE);
+		tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
+
+	} else
+		tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
 
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A3) {
 		tg3_stop_fw(tp);
@@ -4082,6 +4360,9 @@ static int tg3_chip_reset(struct tg3 *tp)
 	if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
 		tp->mac_mode = MAC_MODE_PORT_MODE_TBI;
 		tw32_f(MAC_MODE, tp->mac_mode);
+	} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
+		tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
+		tw32_f(MAC_MODE, tp->mac_mode);
 	} else
 		tw32_f(MAC_MODE, 0);
 	udelay(40);
@@ -5245,7 +5526,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 	}
 #endif
 
-	if (!(tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE)) {
+	if (tp->dev->mtu <= ETH_DATA_LEN) {
 		tw32(BUFMGR_MB_RDMA_LOW_WATER,
 		     tp->bufmgr_config.mbuf_read_dma_low_water);
 		tw32(BUFMGR_MB_MACRX_LOW_WATER,
@@ -5320,7 +5601,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 		/* Setup replenish threshold. */
 		tw32(RCVBDI_JUMBO_THRESH, tp->rx_jumbo_pending / 8);
 
-		if (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) {
+		if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH,
 			     ((u64) tp->rx_jumbo_mapping >> 32));
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
@@ -5381,7 +5662,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 	tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
 		     tp->rx_std_ptr);
 
-	tp->rx_jumbo_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) ?
+	tp->rx_jumbo_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
 						tp->rx_jumbo_pending : 0;
 	tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
 		     tp->rx_jumbo_ptr);
@@ -5683,7 +5964,8 @@ static int tg3_reset_hw(struct tg3 *tp)
 	tw32(MAC_RCV_RULE_1,  0x86000004 & RCV_RULE_DISABLE_MASK);
 	tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
 
-	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+	if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
+	    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780))
 		limit = 8;
 	else
 		limit = 16;
@@ -5865,7 +6147,8 @@ static void tg3_timer(unsigned long __opaque)
 				udelay(40);
 				tg3_setup_phy(tp, 0);
 			}
-		}
+		} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
+			tg3_serdes_parallel_detect(tp);
 
 		tp->timer_counter = tp->timer_multiplier;
 	}
@@ -8569,8 +8852,12 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 			eeprom_phy_id = 0;
 
 		tp->phy_id = eeprom_phy_id;
-		if (eeprom_phy_serdes)
-			tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+		if (eeprom_phy_serdes) {
+			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+				tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
+			else
+				tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+		}
 
 		if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
 			led_cfg = cfg2 & (NIC_SRAM_DATA_CFG_LED_MODE_MASK |
@@ -8705,7 +8992,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 		}
 	}
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
+	if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) &&
 	    !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
 		u32 bmsr, adv_reg, tg3_ctrl;
 
@@ -8758,7 +9045,7 @@ skip_phy_reset:
 		err = tg3_init_5401phy_dsp(tp);
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
+	if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)
 		tp->link_config.advertising =
 			(ADVERTISED_1000baseT_Half |
 			 ADVERTISED_1000baseT_Full |
@@ -8928,6 +9215,10 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5752_A0_HW)
 		tp->pci_chip_rev_id = CHIPREV_ID_5752_A0;
 
+	/* Find msi capability. */
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+		tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
+
 	/* Initialize misc host control in PCI block. */
 	tp->misc_host_ctrl |= (misc_ctrl_reg &
 			       MISC_HOST_CTRL_CHIPREV);
@@ -8943,7 +9234,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	tp->pci_bist         = (cacheline_sz_reg >> 24) & 0xff;
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
 		tp->tg3_flags2 |= TG3_FLG2_5750_PLUS;
 
 	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) ||
@@ -8953,6 +9245,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
 		tp->tg3_flags2 |= TG3_FLG2_HW_TSO;
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752)
+		tp->tg3_flags2 |= TG3_FLG2_JUMBO_CAPABLE;
+
 	if (pci_find_capability(tp->pdev, PCI_CAP_ID_EXP) != 0)
 		tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
 
@@ -9079,8 +9376,9 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	/* Derive initial jumbo mode from MTU assigned in
 	 * ether_setup() via the alloc_etherdev() call
 	 */
-	if (tp->dev->mtu > ETH_DATA_LEN)
-		tp->tg3_flags |= TG3_FLAG_JUMBO_ENABLE;
+	if (tp->dev->mtu > ETH_DATA_LEN &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780)
+		tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
 
 	/* Determine WakeOnLan speed to use. */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -9096,7 +9394,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
 	    ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
 	     (tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
-	     (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)))
+	     (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) ||
+	    (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
 		tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED;
 
 	if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5703_AX ||
@@ -9305,8 +9604,9 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
 #endif
 
 	mac_offset = 0x7c;
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
-	    !(tp->tg3_flags & TG3_FLG2_SUN_570X)) {
+	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
+	     !(tp->tg3_flags & TG3_FLG2_SUN_570X)) ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
 		if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
 			mac_offset = 0xcc;
 		if (tg3_nvram_lock(tp))
@@ -9620,6 +9920,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 
 			/* Set bit 23 to enable PCIX hw bug fix */
 			tp->dma_rwctrl |= 0x009f0000;
+		} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+			/* 5780 always in PCIX mode */
+			tp->dma_rwctrl |= 0x00144000;
 		} else {
 			tp->dma_rwctrl |= 0x001b000f;
 		}
@@ -9773,19 +10076,35 @@ static void __devinit tg3_init_link_config(struct tg3 *tp)
 
 static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
 {
-	tp->bufmgr_config.mbuf_read_dma_low_water =
-		DEFAULT_MB_RDMA_LOW_WATER;
-	tp->bufmgr_config.mbuf_mac_rx_low_water =
-		DEFAULT_MB_MACRX_LOW_WATER;
-	tp->bufmgr_config.mbuf_high_water =
-		DEFAULT_MB_HIGH_WATER;
+	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+		tp->bufmgr_config.mbuf_read_dma_low_water =
+			DEFAULT_MB_RDMA_LOW_WATER_5705;
+		tp->bufmgr_config.mbuf_mac_rx_low_water =
+			DEFAULT_MB_MACRX_LOW_WATER_5705;
+		tp->bufmgr_config.mbuf_high_water =
+			DEFAULT_MB_HIGH_WATER_5705;
+
+		tp->bufmgr_config.mbuf_read_dma_low_water_jumbo =
+			DEFAULT_MB_RDMA_LOW_WATER_JUMBO_5780;
+		tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo =
+			DEFAULT_MB_MACRX_LOW_WATER_JUMBO_5780;
+		tp->bufmgr_config.mbuf_high_water_jumbo =
+			DEFAULT_MB_HIGH_WATER_JUMBO_5780;
+	} else {
+		tp->bufmgr_config.mbuf_read_dma_low_water =
+			DEFAULT_MB_RDMA_LOW_WATER;
+		tp->bufmgr_config.mbuf_mac_rx_low_water =
+			DEFAULT_MB_MACRX_LOW_WATER;
+		tp->bufmgr_config.mbuf_high_water =
+			DEFAULT_MB_HIGH_WATER;
 
-	tp->bufmgr_config.mbuf_read_dma_low_water_jumbo =
-		DEFAULT_MB_RDMA_LOW_WATER_JUMBO;
-	tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo =
-		DEFAULT_MB_MACRX_LOW_WATER_JUMBO;
-	tp->bufmgr_config.mbuf_high_water_jumbo =
-		DEFAULT_MB_HIGH_WATER_JUMBO;
+		tp->bufmgr_config.mbuf_read_dma_low_water_jumbo =
+			DEFAULT_MB_RDMA_LOW_WATER_JUMBO;
+		tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo =
+			DEFAULT_MB_MACRX_LOW_WATER_JUMBO;
+		tp->bufmgr_config.mbuf_high_water_jumbo =
+			DEFAULT_MB_HIGH_WATER_JUMBO;
+	}
 
 	tp->bufmgr_config.dma_low_water = DEFAULT_DMA_LOW_WATER;
 	tp->bufmgr_config.dma_high_water = DEFAULT_DMA_HIGH_WATER;
@@ -9803,6 +10122,7 @@ static char * __devinit tg3_phy_string(struct tg3 *tp)
 	case PHY_ID_BCM5705:	return "5705";
 	case PHY_ID_BCM5750:	return "5750";
 	case PHY_ID_BCM5752:	return "5752";
+	case PHY_ID_BCM5780:	return "5780";
 	case PHY_ID_BCM8002:	return "8002/serdes";
 	case 0:			return "serdes";
 	default:		return "unknown";
@@ -9998,8 +10318,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	tg3_init_link_config(tp);
 
-	tg3_init_bufmgr_config(tp);
-
 	tp->rx_pending = TG3_DEF_RX_RING_PENDING;
 	tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING;
 	tp->tx_pending = TG3_DEF_TX_RING_PENDING;
@@ -10028,14 +10346,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_iounmap;
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
-		tp->bufmgr_config.mbuf_read_dma_low_water =
-			DEFAULT_MB_RDMA_LOW_WATER_5705;
-		tp->bufmgr_config.mbuf_mac_rx_low_water =
-			DEFAULT_MB_MACRX_LOW_WATER_5705;
-		tp->bufmgr_config.mbuf_high_water =
-			DEFAULT_MB_HIGH_WATER_5705;
-	}
+	tg3_init_bufmgr_config(tp);
 
 #if TG3_TSO_SUPPORT != 0
 	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {

drivers/net/tg3.h

@@ -136,6 +136,7 @@
 #define   ASIC_REV_5705			 0x03
 #define   ASIC_REV_5750			 0x04
 #define   ASIC_REV_5752			 0x06
+#define   ASIC_REV_5780			 0x08
 #define  GET_CHIP_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 8)
 #define   CHIPREV_5700_AX		 0x70
 #define   CHIPREV_5700_BX		 0x71
@@ -984,14 +985,17 @@
 #define  DEFAULT_MB_RDMA_LOW_WATER	 0x00000050
 #define  DEFAULT_MB_RDMA_LOW_WATER_5705	 0x00000000
 #define  DEFAULT_MB_RDMA_LOW_WATER_JUMBO 0x00000130
+#define  DEFAULT_MB_RDMA_LOW_WATER_JUMBO_5780 0x00000000
 #define BUFMGR_MB_MACRX_LOW_WATER	0x00004414
 #define  DEFAULT_MB_MACRX_LOW_WATER	  0x00000020
 #define  DEFAULT_MB_MACRX_LOW_WATER_5705  0x00000010
 #define  DEFAULT_MB_MACRX_LOW_WATER_JUMBO 0x00000098
+#define  DEFAULT_MB_MACRX_LOW_WATER_JUMBO_5780 0x0000004b
 #define BUFMGR_MB_HIGH_WATER		0x00004418
 #define  DEFAULT_MB_HIGH_WATER		 0x00000060
 #define  DEFAULT_MB_HIGH_WATER_5705	 0x00000060
 #define  DEFAULT_MB_HIGH_WATER_JUMBO	 0x0000017c
+#define  DEFAULT_MB_HIGH_WATER_JUMBO_5780 0x00000096
 #define BUFMGR_RX_MB_ALLOC_REQ		0x0000441c
 #define  BUFMGR_MB_ALLOC_BIT		 0x10000000
 #define BUFMGR_RX_MB_ALLOC_RESP		0x00004420
@@ -2087,6 +2091,8 @@ struct tg3 {
 	struct tg3_rx_buffer_desc	*rx_rcb;
 	dma_addr_t			rx_rcb_mapping;
 
+	u32				rx_pkt_buf_sz;
+
 	/* begin "everything else" cacheline(s) section */
 	struct net_device_stats		net_stats;
 	struct net_device_stats		net_stats_prev;
@@ -2124,7 +2130,7 @@ struct tg3 {
 #define TG3_FLAG_NO_TX_PSEUDO_CSUM	0x00100000
 #define TG3_FLAG_NO_RX_PSEUDO_CSUM	0x00200000
 #define TG3_FLAG_SERDES_WOL_CAP		0x00400000
-#define TG3_FLAG_JUMBO_ENABLE		0x00800000
+#define TG3_FLAG_JUMBO_RING_ENABLE	0x00800000
 #define TG3_FLAG_10_100_ONLY		0x01000000
 #define TG3_FLAG_PAUSE_AUTONEG		0x02000000
 #define TG3_FLAG_BROKEN_CHECKSUMS	0x10000000
@@ -2154,6 +2160,11 @@ struct tg3 {
 #define TG3_FLG2_5750_PLUS		0x00080000
 #define TG3_FLG2_PROTECTED_NVRAM	0x00100000
 #define TG3_FLG2_USING_MSI		0x00200000
+#define TG3_FLG2_JUMBO_CAPABLE		0x00400000
+#define TG3_FLG2_MII_SERDES		0x00800000
+#define TG3_FLG2_ANY_SERDES		(TG3_FLG2_PHY_SERDES |	\
+					TG3_FLG2_MII_SERDES)
+#define TG3_FLG2_PARALLEL_DETECT	0x01000000
 
 	u32				split_mode_max_reqs;
 #define SPLIT_MODE_5704_MAX_REQ		3
@@ -2187,6 +2198,7 @@ struct tg3 {
 	u8				pci_bist;
 
 	int				pm_cap;
+	int				msi_cap;
 
 	/* PHY info */
 	u32				phy_id;
@@ -2200,6 +2212,7 @@ struct tg3 {
 #define PHY_ID_BCM5705			0x600081a0
 #define PHY_ID_BCM5750			0x60008180
 #define PHY_ID_BCM5752			0x60008100
+#define PHY_ID_BCM5780			0x60008350
 #define PHY_ID_BCM8002			0x60010140
 #define PHY_ID_INVALID			0xffffffff
 #define PHY_ID_REV_MASK			0x0000000f

drivers/pcmcia/sa1100_jornada720.c

@@ -30,20 +30,9 @@ static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
    */
   GRER |= 0x00000002;
   /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
-  PA_DDR = 0;
-  PA_DWR = 0;
-  PA_SDR = 0;
-  PA_SSR = 0;
-
-  PB_DDR = 0;
-  PB_DWR = 0x01;
-  PB_SDR = 0;
-  PB_SSR = 0;
-
-  PC_DDR = 0x88;
-  PC_DWR = 0x20;
-  PC_SDR = 0;
-  PC_SSR = 0;
+  sa1111_set_io_dir(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+  sa1111_set_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+  sa1111_set_sleep_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
 
   return sa1111_pcmcia_hw_init(skt);
 }
@@ -95,7 +84,7 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
     unsigned long flags;
 
     local_irq_save(flags);
-    PA_DWR = (PA_DWR & ~pa_dwr_mask) | pa_dwr_set;
+    sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set);
     local_irq_restore(flags);
   }
 

drivers/scsi/aacraid/README

@@ -13,6 +13,7 @@ Supported Cards/Chipsets
 	Adaptec 2020S
 	Adaptec 2025S
 	Adaptec 2120S
+	Adaptec 2130S
 	Adaptec 2200S
 	Adaptec 2230S
 	Adaptec 2240S
@@ -35,6 +36,13 @@ Supported Cards/Chipsets
 	HP NetRAID-4M
 	Legend S220
 	Legend S230
+	IBM ServeRAID 8i
+	ICP 9014R0
+	ICP 9024R0
+	ICP 9047MA
+	ICP 9087MA
+	ICP 9085LI
+	ICP 5085AU
 
 People
 -------------------------

drivers/scsi/aacraid/TODO

@@ -1,6 +1,4 @@
 o	Testing
 o	More testing
-o	Feature request: display the firmware/bios/etc revisions in the
-	/proc info
 o	Drop irq_mask, basically unused
 o	I/O size increase

drivers/scsi/aacraid/aachba.c

@@ -276,7 +276,6 @@ int aac_get_containers(struct aac_dev *dev)
 
 	if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
 		maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
-
 	fsa_dev_ptr = (struct fsa_dev_info *) kmalloc(
 	  sizeof(*fsa_dev_ptr) * maximum_num_containers, GFP_KERNEL);
 	if (!fsa_dev_ptr) {
@@ -527,6 +526,11 @@ static char *container_types[] = {
         "V-MIRRORS",          
         "PSEUDO R4",          
 	"RAID50",
+	"RAID5D",
+	"RAID5D0",
+	"RAID1E",
+	"RAID6",
+	"RAID60",
         "Unknown"
 };
 
@@ -610,7 +614,9 @@ int aac_get_adapter_info(struct aac_dev* dev)
 	struct fib* fibptr;
 	int rcode;
 	u32 tmp;
-	struct aac_adapter_info * info;
+	struct aac_adapter_info *info;
+	struct aac_bus_info *command;
+	struct aac_bus_info_response *bus_info;
 
 	if (!(fibptr = fib_alloc(dev)))
 		return -ENOMEM;
@@ -655,6 +661,36 @@ int aac_get_adapter_info(struct aac_dev* dev)
 			memcpy(&dev->supplement_adapter_info, info, sizeof(*info));
 	}
 
+
+	/* 
+	 * GetBusInfo 
+	 */
+
+	fib_init(fibptr);
+
+	bus_info = (struct aac_bus_info_response *) fib_data(fibptr);
+
+	memset(bus_info, 0, sizeof(*bus_info));
+
+	command = (struct aac_bus_info *)bus_info;
+
+	command->Command = cpu_to_le32(VM_Ioctl);
+	command->ObjType = cpu_to_le32(FT_DRIVE);
+	command->MethodId = cpu_to_le32(1);
+	command->CtlCmd = cpu_to_le32(GetBusInfo);
+
+	rcode = fib_send(ContainerCommand,
+			 fibptr,
+			 sizeof (*bus_info),
+			 FsaNormal,
+			 1, 1,
+			 NULL, NULL);
+
+	if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) {
+		dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus);
+		dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount);
+	}
+
 	tmp = le32_to_cpu(dev->adapter_info.kernelrev);
 	printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n", 
 			dev->name, 
@@ -1818,7 +1854,9 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
 	u32 flag;
 	u32 timeout;
 
-	if( scsicmd->device->id > 15 || scsicmd->device->lun > 7) {
+	dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+	if (scsicmd->device->id >= dev->maximum_num_physicals || 
+			scsicmd->device->lun > 7) {
 		scsicmd->result = DID_NO_CONNECT << 16;
 		scsicmd->scsi_done(scsicmd);
 		return 0;

drivers/scsi/aacraid/aacraid.h

@@ -845,6 +845,28 @@ struct aac_supplement_adapter_info
 #define AAC_SIS_VERSION_V3	3
 #define AAC_SIS_SLOT_UNKNOWN	0xFF
 
+#define GetBusInfo 0x00000009
+struct aac_bus_info {
+	__le32	Command;	/* VM_Ioctl */
+	__le32	ObjType;	/* FT_DRIVE */
+	__le32	MethodId;	/* 1 = SCSI Layer */
+	__le32	ObjectId;	/* Handle */
+	__le32	CtlCmd;		/* GetBusInfo */
+};
+
+struct aac_bus_info_response {
+	__le32	Status;		/* ST_OK */
+	__le32	ObjType;
+	__le32	MethodId;	/* unused */
+	__le32	ObjectId;	/* unused */
+	__le32	CtlCmd;		/* unused */
+	__le32	ProbeComplete;
+	__le32	BusCount;
+	__le32	TargetsPerBus;
+	u8	InitiatorBusId[10];
+	u8	BusValid[10];
+};
+
 /*
  * Battery platforms
  */
@@ -934,6 +956,8 @@ struct aac_dev
 
 	struct Scsi_Host	*scsi_host_ptr;
 	int			maximum_num_containers;
+	int			maximum_num_physicals;
+	int			maximum_num_channels;
 	struct fsa_dev_info	*fsa_dev;
 	pid_t			thread_pid;
 	int			cardtype;

drivers/scsi/aacraid/commctrl.c

@@ -517,7 +517,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
 	}
 	if (dev->dac_support == 1) {
 		struct user_sgmap64* upsg = (struct user_sgmap64*)&user_srbcmd->sg;
-		struct sgmap64* psg = (struct sgmap64*)&user_srbcmd->sg;
+		struct sgmap64* psg = (struct sgmap64*)&srbcmd->sg;
 		struct user_sgmap* usg;
 		byte_count = 0;
 

drivers/scsi/aacraid/linit.c

@@ -102,32 +102,43 @@ static struct pci_device_id aac_pci_tbl[] = {
 	{ 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
 	{ 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
 	{ 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
-	{ 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 25 }, /* Callisto Jupiter Platform */
-	{ 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 26 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
-	{ 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 27 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
-	{ 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 28 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
-	{ 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 29 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
-	{ 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 30 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
-	{ 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 31 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
-	{ 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 32 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
-	{ 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 33 }, /* AAR-2610SA PCI SATA 6ch */
-	{ 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 34 }, /* ASR-2240S (SabreExpress) */
-	{ 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 35 }, /* ASR-4005SAS */
-	{ 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 36 }, /* IBM 8i (AvonPark) */
-	{ 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 37 }, /* ASR-4000SAS (BlackBird) */
-	{ 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 38 }, /* ASR-4800SAS (Marauder-X) */
-	{ 0x9005, 0x0285, 0x9005, 0x029A, 0, 0, 39 }, /* ASR-4805SAS (Marauder-E) */
-
-	{ 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 40 }, /* Perc 320/DC*/
-	{ 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 41 }, /* Adaptec 5400S (Mustang)*/
-	{ 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 42 }, /* Adaptec 5400S (Mustang)*/
-	{ 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 43 }, /* Dell PERC2/QC */
-	{ 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 44 }, /* HP NetRAID-4M */
-
-	{ 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 45 }, /* Dell Catchall */
-	{ 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 46 }, /* Legend Catchall */
-	{ 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 47 }, /* Adaptec Catch All */
-	{ 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 48 }, /* Adaptec Rocket Catch All */
+	{ 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024R0 (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014R0 (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x02a0, 0, 0, 27 }, /* ICP9047MA (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x02a1, 0, 0, 28 }, /* ICP9087MA (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x02a3, 0, 0, 29 }, /* ICP5085AU (Hurricane) */
+	{ 0x9005, 0x0285, 0x9005, 0x02a4, 0, 0, 30 }, /* ICP9085LI (Marauder-X) */
+	{ 0x9005, 0x0285, 0x9005, 0x02a5, 0, 0, 31 }, /* ICP5085BR (Marauder-E) */
+	{ 0x9005, 0x0287, 0x9005, 0x0800, 0, 0, 32 }, /* Themisto Jupiter Platform */
+	{ 0x9005, 0x0200, 0x9005, 0x0200, 0, 0, 32 }, /* Themisto Jupiter Platform */
+	{ 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 33 }, /* Callisto Jupiter Platform */
+	{ 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 34 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
+	{ 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 35 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
+	{ 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 36 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
+	{ 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 37 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
+	{ 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 38 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
+	{ 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 39 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
+	{ 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 40 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
+	{ 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 41 }, /* AAR-2610SA PCI SATA 6ch */
+	{ 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 42 }, /* ASR-2240S (SabreExpress) */
+	{ 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 43 }, /* ASR-4005SAS */
+	{ 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 44 }, /* IBM 8i (AvonPark) */
+	{ 0x9005, 0x0285, 0x1014, 0x0312, 0, 0, 44 }, /* IBM 8i (AvonPark Lite) */
+	{ 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 45 }, /* ASR-4000SAS (BlackBird) */
+	{ 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 46 }, /* ASR-4800SAS (Marauder-X) */
+	{ 0x9005, 0x0285, 0x9005, 0x029a, 0, 0, 47 }, /* ASR-4805SAS (Marauder-E) */
+	{ 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 48 }, /* ASR-4810SAS (Hurricane */
+
+	{ 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 49 }, /* Perc 320/DC*/
+	{ 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 50 }, /* Adaptec 5400S (Mustang)*/
+	{ 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 51 }, /* Adaptec 5400S (Mustang)*/
+	{ 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 52 }, /* Dell PERC2/QC */
+	{ 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 53 }, /* HP NetRAID-4M */
+
+	{ 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 54 }, /* Dell Catchall */
+	{ 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 55 }, /* Legend Catchall */
+	{ 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 56 }, /* Adaptec Catch All */
+	{ 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 57 }, /* Adaptec Rocket Catch All */
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
@@ -164,6 +175,14 @@ static struct aac_driver_ident aac_drivers[] = {
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2820SA      ", 1 }, /* AAR-2820SA (Intruder) */
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2620SA      ", 1 }, /* AAR-2620SA (Intruder) */
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2420SA      ", 1 }, /* AAR-2420SA (Intruder) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9024R0       ", 2 }, /* ICP9024R0 (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9014R0       ", 1 }, /* ICP9014R0 (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9047MA       ", 1 }, /* ICP9047MA (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9087MA       ", 1 }, /* ICP9087MA (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP5085AU       ", 1 }, /* ICP5085AU (Hurricane) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9085LI       ", 1 }, /* ICP9085LI (Marauder-X) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP5085BR       ", 1 }, /* ICP5085BR (Marauder-E) */
+	{ NULL        , "aacraid",  "ADAPTEC ", "Themisto        ", 0, AAC_QUIRK_SLAVE }, /* Jupiter Platform */
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "Callisto        ", 2, AAC_QUIRK_MASTER }, /* Jupiter Platform */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2020SA       ", 1 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2025SA       ", 1 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
@@ -175,10 +194,11 @@ static struct aac_driver_ident aac_drivers[] = {
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-2610SA      ", 1 }, /* SATA 6Ch (Bearcat) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2240S       ", 1 }, /* ASR-2240S (SabreExpress) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4005SAS     ", 1 }, /* ASR-4005SAS */
-	{ aac_rx_init, "aacraid",  "IBM     ", "ServeRAID 8i    ", 1 }, /* IBM 8i (AvonPark) */
+	{ aac_rx_init, "ServeRAID","IBM     ", "ServeRAID 8i    ", 1 }, /* IBM 8i (AvonPark) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4000SAS     ", 1 }, /* ASR-4000SAS (BlackBird & AvonPark) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4800SAS     ", 1 }, /* ASR-4800SAS (Marauder-X) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4805SAS     ", 1 }, /* ASR-4805SAS (Marauder-E) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4810SAS     ", 1 }, /* ASR-4810SAS (Hurricane) */
 
 	{ aac_rx_init, "percraid", "DELL    ", "PERC 320/DC     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
 	{ aac_sa_init, "aacraid",  "ADAPTEC ", "Adaptec 5400S   ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
@@ -681,7 +701,7 @@ static struct scsi_host_template aac_driver_template = {
 	.slave_configure		= aac_slave_configure,
 	.eh_host_reset_handler		= aac_eh_reset,
 	.can_queue      		= AAC_NUM_IO_FIB,	
-	.this_id        		= 16,
+	.this_id        		= MAXIMUM_NUM_CONTAINERS,
 	.sg_tablesize   		= 16,
 	.max_sectors    		= 128,
 #if (AAC_NUM_IO_FIB > 256)
@@ -760,6 +780,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 		if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL))
 			goto out_free_fibs;
 
+	aac->maximum_num_channels = aac_drivers[index].channels;
 	aac_get_adapter_info(aac);
 
 	/*
@@ -786,7 +807,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 	 * physical channels are address by their actual physical number+1
 	 */
 	if (aac->nondasd_support == 1)
-		shost->max_channel = aac_drivers[index].channels+1;
+		shost->max_channel = aac->maximum_num_channels + 1;
 	else
 		shost->max_channel = 1;
 
@@ -795,6 +816,8 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 	list_add(&aac->entry, insert);
 
 	shost->max_id = aac->maximum_num_containers;
+	if (shost->max_id < aac->maximum_num_physicals)
+		shost->max_id = aac->maximum_num_physicals;
 	if (shost->max_id < MAXIMUM_NUM_CONTAINERS)
 		shost->max_id = MAXIMUM_NUM_CONTAINERS;
 	else

drivers/scsi/advansys.c

@@ -4556,8 +4556,6 @@ advansys_detect(struct scsi_host_template *tpnt)
                 continue;
             }
 
-	    scsi_set_device(shp, dev);
-
             /* Save a pointer to the Scsi_Host of each board found. */
             asc_host[asc_board_count++] = shp;
 
@@ -9194,8 +9192,8 @@ asc_prt_scsi_cmnd(struct scsi_cmnd *s)
         s->sc_data_direction, s->resid);
 
     printk(
-" use_sg %u, sglist_len %u, abort_reason 0x%x\n",
-        s->use_sg, s->sglist_len, s->abort_reason);
+" use_sg %u, sglist_len %u\n",
+        s->use_sg, s->sglist_len);
 
     printk(
 " serial_number 0x%x, retries %d, allowed %d\n",

drivers/scsi/aic7xxx/aic7770.c

@@ -254,19 +254,12 @@ aic7770_config(struct ahc_softc *ahc, struct aic7770_identity *entry, u_int io)
 	if (error != 0)
 		return (error);
 
-	ahc_list_lock(&l);
-	/*
-	 * Link this softc in with all other ahc instances.
-	 */
-	ahc_softc_insert(ahc);
+	ahc->init_level++;
 
 	/*
 	 * Enable the board's BUS drivers
 	 */
 	ahc_outb(ahc, BCTL, ENABLE);
-
-	ahc_list_unlock(&l);
-
 	return (0);
 }
 

drivers/scsi/aic7xxx/aic7770_osm.c

@@ -102,8 +102,7 @@ aic7770_probe(struct device *dev)
 
  	dev_set_drvdata(dev, ahc);
 
-	if (aic7xxx_detect_complete)
-		error = ahc_linux_register_host(ahc, &aic7xxx_driver_template);
+	error = ahc_linux_register_host(ahc, &aic7xxx_driver_template);
 	return (error);
 }
 

drivers/scsi/aic7xxx/aic79xx_osm.c

@@ -1553,7 +1553,7 @@ ahd_linux_dev_reset(Scsi_Cmnd *cmd)
 	ahd_queue_scb(ahd, scb);
 
 	scb->platform_data->flags |= AHD_SCB_UP_EH_SEM;
-	spin_unlock_irq(&ahd->platform_data->spin_lock);
+	ahd_unlock(ahd, &s);
 	init_timer(&timer);
 	timer.data = (u_long)scb;
 	timer.expires = jiffies + (5 * HZ);
@@ -1567,7 +1567,7 @@ ahd_linux_dev_reset(Scsi_Cmnd *cmd)
 		printf("Timer Expired\n");
 		retval = FAILED;
 	}
-	spin_lock_irq(&ahd->platform_data->spin_lock);
+	ahd_lock(ahd, &s);
 	ahd_schedule_runq(ahd);
 	ahd_linux_run_complete_queue(ahd);
 	ahd_unlock(ahd, &s);

drivers/scsi/aic7xxx/aic7xxx.h

@@ -1023,9 +1023,6 @@ struct ahc_softc {
 	struct cs		 *critical_sections;
 	u_int			  num_critical_sections;
 
-	/* Links for chaining softcs */
-	TAILQ_ENTRY(ahc_softc)	  links;
-
 	/* Channel Names ('A', 'B', etc.) */
 	char			  channel;
 	char			  channel_b;
@@ -1110,9 +1107,6 @@ struct ahc_softc {
 	uint16_t		  user_tagenable;/* Tagged Queuing allowed */
 };
 
-TAILQ_HEAD(ahc_softc_tailq, ahc_softc);
-extern struct ahc_softc_tailq ahc_tailq;
-
 /************************ Active Device Information ***************************/
 typedef enum {
 	ROLE_UNKNOWN,
@@ -1198,7 +1192,6 @@ void			 ahc_intr_enable(struct ahc_softc *ahc, int enable);
 void			 ahc_pause_and_flushwork(struct ahc_softc *ahc);
 int			 ahc_suspend(struct ahc_softc *ahc); 
 int			 ahc_resume(struct ahc_softc *ahc);
-void			 ahc_softc_insert(struct ahc_softc *);
 void			 ahc_set_unit(struct ahc_softc *, int);
 void			 ahc_set_name(struct ahc_softc *, char *);
 void			 ahc_alloc_scbs(struct ahc_softc *ahc);

drivers/scsi/aic7xxx/aic7xxx_core.c

@@ -52,9 +52,6 @@
 #include <dev/aic7xxx/aicasm/aicasm_insformat.h>
 #endif
 
-/****************************** Softc Data ************************************/
-struct ahc_softc_tailq ahc_tailq = TAILQ_HEAD_INITIALIZER(ahc_tailq);
-
 /***************************** Lookup Tables **********************************/
 char *ahc_chip_names[] =
 {
@@ -3878,62 +3875,6 @@ ahc_softc_init(struct ahc_softc *ahc)
 	return (0);
 }
 
-void
-ahc_softc_insert(struct ahc_softc *ahc)
-{
-	struct ahc_softc *list_ahc;
-
-#if AHC_PCI_CONFIG > 0
-	/*
-	 * Second Function PCI devices need to inherit some
-	 * settings from function 0.
-	 */
-	if ((ahc->chip & AHC_BUS_MASK) == AHC_PCI
-	 && (ahc->features & AHC_MULTI_FUNC) != 0) {
-		TAILQ_FOREACH(list_ahc, &ahc_tailq, links) {
-			ahc_dev_softc_t list_pci;
-			ahc_dev_softc_t pci;
-
-			list_pci = list_ahc->dev_softc;
-			pci = ahc->dev_softc;
-			if (ahc_get_pci_slot(list_pci) == ahc_get_pci_slot(pci)
-			 && ahc_get_pci_bus(list_pci) == ahc_get_pci_bus(pci)) {
-				struct ahc_softc *master;
-				struct ahc_softc *slave;
-
-				if (ahc_get_pci_function(list_pci) == 0) {
-					master = list_ahc;
-					slave = ahc;
-				} else {
-					master = ahc;
-					slave = list_ahc;
-				}
-				slave->flags &= ~AHC_BIOS_ENABLED; 
-				slave->flags |=
-				    master->flags & AHC_BIOS_ENABLED;
-				slave->flags &= ~AHC_PRIMARY_CHANNEL; 
-				slave->flags |=
-				    master->flags & AHC_PRIMARY_CHANNEL;
-				break;
-			}
-		}
-	}
-#endif
-
-	/*
-	 * Insertion sort into our list of softcs.
-	 */
-	list_ahc = TAILQ_FIRST(&ahc_tailq);
-	while (list_ahc != NULL
-	    && ahc_softc_comp(ahc, list_ahc) <= 0)
-		list_ahc = TAILQ_NEXT(list_ahc, links);
-	if (list_ahc != NULL)
-		TAILQ_INSERT_BEFORE(list_ahc, ahc, links);
-	else
-		TAILQ_INSERT_TAIL(&ahc_tailq, ahc, links);
-	ahc->init_level++;
-}
-
 void
 ahc_set_unit(struct ahc_softc *ahc, int unit)
 {

drivers/scsi/aic7xxx/aic7xxx_osm.c

@@ -136,10 +136,6 @@ static struct scsi_transport_template *ahc_linux_transport_template = NULL;
 #include <linux/blkdev.h>		/* For block_size() */
 #include <linux/delay.h>	/* For ssleep/msleep */
 
-/*
- * Lock protecting manipulation of the ahc softc list.
- */
-spinlock_t ahc_list_spinlock;
 
 /*
  * Set this to the delay in seconds after SCSI bus reset.
@@ -291,25 +287,6 @@ ahc_print_path(struct ahc_softc *ahc, struct scb *scb)
  */
 static uint32_t aic7xxx_no_reset;
 
-/*
- * Certain PCI motherboards will scan PCI devices from highest to lowest,
- * others scan from lowest to highest, and they tend to do all kinds of
- * strange things when they come into contact with PCI bridge chips.  The
- * net result of all this is that the PCI card that is actually used to boot
- * the machine is very hard to detect.  Most motherboards go from lowest
- * PCI slot number to highest, and the first SCSI controller found is the
- * one you boot from.  The only exceptions to this are when a controller
- * has its BIOS disabled.  So, we by default sort all of our SCSI controllers
- * from lowest PCI slot number to highest PCI slot number.  We also force
- * all controllers with their BIOS disabled to the end of the list.  This
- * works on *almost* all computers.  Where it doesn't work, we have this
- * option.  Setting this option to non-0 will reverse the order of the sort
- * to highest first, then lowest, but will still leave cards with their BIOS
- * disabled at the very end.  That should fix everyone up unless there are
- * really strange cirumstances.
- */
-static uint32_t aic7xxx_reverse_scan;
-
 /*
  * Should we force EXTENDED translation on a controller.
  *     0 == Use whatever is in the SEEPROM or default to off
@@ -337,13 +314,6 @@ static uint32_t aic7xxx_pci_parity = ~0;
  */
 uint32_t aic7xxx_allow_memio = ~0;
 
-/*
- * aic7xxx_detect() has been run, so register all device arrivals
- * immediately with the system rather than deferring to the sorted
- * attachment performed by aic7xxx_detect().
- */
-int aic7xxx_detect_complete;
-
 /*
  * So that we can set how long each device is given as a selection timeout.
  * The table of values goes like this:
@@ -423,7 +393,9 @@ static int ahc_linux_run_command(struct ahc_softc*,
 static void ahc_linux_setup_tag_info_global(char *p);
 static aic_option_callback_t ahc_linux_setup_tag_info;
 static int  aic7xxx_setup(char *s);
-static int  ahc_linux_next_unit(void);
+
+static int ahc_linux_unit;
+
 
 /********************************* Inlines ************************************/
 static __inline void ahc_linux_unmap_scb(struct ahc_softc*, struct scb*);
@@ -475,48 +447,6 @@ ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb,
 	return (consumed);
 }
 
-/*
- * Try to detect an Adaptec 7XXX controller.
- */
-static int
-ahc_linux_detect(struct scsi_host_template *template)
-{
-	struct	ahc_softc *ahc;
-	int     found = 0;
-
-	/*
-	 * If we've been passed any parameters, process them now.
-	 */
-	if (aic7xxx)
-		aic7xxx_setup(aic7xxx);
-
-	template->proc_name = "aic7xxx";
-
-	/*
-	 * Initialize our softc list lock prior to
-	 * probing for any adapters.
-	 */
-	ahc_list_lockinit();
-
-	found = ahc_linux_pci_init();
-	if (!ahc_linux_eisa_init())
-		found++;
-	
-	/*
-	 * Register with the SCSI layer all
-	 * controllers we've found.
-	 */
-	TAILQ_FOREACH(ahc, &ahc_tailq, links) {
-
-		if (ahc_linux_register_host(ahc, template) == 0)
-			found++;
-	}
-
-	aic7xxx_detect_complete++;
-
-	return (found);
-}
-
 /*
  * Return a string describing the driver.
  */
@@ -848,6 +778,7 @@ ahc_linux_bus_reset(struct scsi_cmnd *cmd)
 struct scsi_host_template aic7xxx_driver_template = {
 	.module			= THIS_MODULE,
 	.name			= "aic7xxx",
+	.proc_name		= "aic7xxx",
 	.proc_info		= ahc_linux_proc_info,
 	.info			= ahc_linux_info,
 	.queuecommand		= ahc_linux_queue,
@@ -959,99 +890,6 @@ ahc_dmamap_unload(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map)
 	return (0);
 }
 
-/********************* Platform Dependent Functions ***************************/
-/*
- * Compare "left hand" softc with "right hand" softc, returning:
- * < 0 - lahc has a lower priority than rahc
- *   0 - Softcs are equal
- * > 0 - lahc has a higher priority than rahc
- */
-int
-ahc_softc_comp(struct ahc_softc *lahc, struct ahc_softc *rahc)
-{
-	int	value;
-	int	rvalue;
-	int	lvalue;
-
-	/*
-	 * Under Linux, cards are ordered as follows:
-	 *	1) VLB/EISA BIOS enabled devices sorted by BIOS address.
-	 *	2) PCI devices with BIOS enabled sorted by bus/slot/func.
-	 *	3) All remaining VLB/EISA devices sorted by ioport.
-	 *	4) All remaining PCI devices sorted by bus/slot/func.
-	 */
-	value = (lahc->flags & AHC_BIOS_ENABLED)
-	      - (rahc->flags & AHC_BIOS_ENABLED);
-	if (value != 0)
-		/* Controllers with BIOS enabled have a *higher* priority */
-		return (value);
-
-	/*
-	 * Same BIOS setting, now sort based on bus type.
-	 * EISA and VL controllers sort together.  EISA/VL
-	 * have higher priority than PCI.
-	 */
-	rvalue = (rahc->chip & AHC_BUS_MASK);
- 	if (rvalue == AHC_VL)
-		rvalue = AHC_EISA;
-	lvalue = (lahc->chip & AHC_BUS_MASK);
- 	if (lvalue == AHC_VL)
-		lvalue = AHC_EISA;
-	value = rvalue - lvalue;
-	if (value != 0)
-		return (value);
-
-	/* Still equal.  Sort by BIOS address, ioport, or bus/slot/func. */
-	switch (rvalue) {
-#ifdef CONFIG_PCI
-	case AHC_PCI:
-	{
-		char primary_channel;
-
-		if (aic7xxx_reverse_scan != 0)
-			value = ahc_get_pci_bus(lahc->dev_softc)
-			      - ahc_get_pci_bus(rahc->dev_softc);
-		else
-			value = ahc_get_pci_bus(rahc->dev_softc)
-			      - ahc_get_pci_bus(lahc->dev_softc);
-		if (value != 0)
-			break;
-		if (aic7xxx_reverse_scan != 0)
-			value = ahc_get_pci_slot(lahc->dev_softc)
-			      - ahc_get_pci_slot(rahc->dev_softc);
-		else
-			value = ahc_get_pci_slot(rahc->dev_softc)
-			      - ahc_get_pci_slot(lahc->dev_softc);
-		if (value != 0)
-			break;
-		/*
-		 * On multi-function devices, the user can choose
-		 * to have function 1 probed before function 0.
-		 * Give whichever channel is the primary channel
-		 * the highest priority.
-		 */
-		primary_channel = (lahc->flags & AHC_PRIMARY_CHANNEL) + 'A';
-		value = -1;
-		if (lahc->channel == primary_channel)
-			value = 1;
-		break;
-	}
-#endif
-	case AHC_EISA:
-		if ((rahc->flags & AHC_BIOS_ENABLED) != 0) {
-			value = rahc->platform_data->bios_address
-			      - lahc->platform_data->bios_address; 
-		} else {
-			value = rahc->bsh.ioport
-			      - lahc->bsh.ioport; 
-		}
-		break;
-	default:
-		panic("ahc_softc_sort: invalid bus type");
-	}
-	return (value);
-}
-
 static void
 ahc_linux_setup_tag_info_global(char *p)
 {
@@ -1103,7 +941,6 @@ aic7xxx_setup(char *s)
 #ifdef AHC_DEBUG
 		{ "debug", &ahc_debug },
 #endif
-		{ "reverse_scan", &aic7xxx_reverse_scan },
 		{ "periodic_otag", &aic7xxx_periodic_otag },
 		{ "pci_parity", &aic7xxx_pci_parity },
 		{ "seltime", &aic7xxx_seltime },
@@ -1178,7 +1015,7 @@ ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *templa
 	host->max_lun = AHC_NUM_LUNS;
 	host->max_channel = (ahc->features & AHC_TWIN) ? 1 : 0;
 	host->sg_tablesize = AHC_NSEG;
-	ahc_set_unit(ahc, ahc_linux_next_unit());
+	ahc_set_unit(ahc, ahc_linux_unit++);
 	sprintf(buf, "scsi%d", host->host_no);
 	new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
 	if (new_name != NULL) {
@@ -1206,29 +1043,6 @@ ahc_linux_get_memsize(void)
 	return ((uint64_t)si.totalram << PAGE_SHIFT);
 }
 
-/*
- * Find the smallest available unit number to use
- * for a new device.  We don't just use a static
- * count to handle the "repeated hot-(un)plug"
- * scenario.
- */
-static int
-ahc_linux_next_unit(void)
-{
-	struct ahc_softc *ahc;
-	int unit;
-
-	unit = 0;
-retry:
-	TAILQ_FOREACH(ahc, &ahc_tailq, links) {
-		if (ahc->unit == unit) {
-			unit++;
-			goto retry;
-		}
-	}
-	return (unit);
-}
-
 /*
  * Place the SCSI bus into a known state by either resetting it,
  * or forcing transfer negotiations on the next command to any
@@ -2633,6 +2447,11 @@ static void ahc_linux_set_dt(struct scsi_target *starget, int dt)
 	ahc_unlock(ahc, &flags);
 }
 
+#if 0
+/* FIXME: This code claims to support IU and QAS.  However, the actual
+ * sequencer code and aic7xxx_core have no support for these parameters and
+ * will get into a bad state if they're negotiated.  Do not enable this
+ * unless you know what you're doing */
 static void ahc_linux_set_qas(struct scsi_target *starget, int qas)
 {
 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
@@ -2688,6 +2507,7 @@ static void ahc_linux_set_iu(struct scsi_target *starget, int iu)
 			 ppr_options, AHC_TRANS_GOAL, FALSE);
 	ahc_unlock(ahc, &flags);
 }
+#endif
 
 static struct spi_function_template ahc_linux_transport_functions = {
 	.set_offset	= ahc_linux_set_offset,
@@ -2698,10 +2518,12 @@ static struct spi_function_template ahc_linux_transport_functions = {
 	.show_width	= 1,
 	.set_dt		= ahc_linux_set_dt,
 	.show_dt	= 1,
+#if 0
 	.set_iu		= ahc_linux_set_iu,
 	.show_iu	= 1,
 	.set_qas	= ahc_linux_set_qas,
 	.show_qas	= 1,
+#endif
 };
 
 
@@ -2709,18 +2531,25 @@ static struct spi_function_template ahc_linux_transport_functions = {
 static int __init
 ahc_linux_init(void)
 {
-	ahc_linux_transport_template = spi_attach_transport(&ahc_linux_transport_functions);
+	/*
+	 * If we've been passed any parameters, process them now.
+	 */
+	if (aic7xxx)
+		aic7xxx_setup(aic7xxx);
+
+	ahc_linux_transport_template =
+		spi_attach_transport(&ahc_linux_transport_functions);
 	if (!ahc_linux_transport_template)
 		return -ENODEV;
+
 	scsi_transport_reserve_target(ahc_linux_transport_template,
 				      sizeof(struct ahc_linux_target));
 	scsi_transport_reserve_device(ahc_linux_transport_template,
 				      sizeof(struct ahc_linux_device));
-	if (ahc_linux_detect(&aic7xxx_driver_template))
-		return 0;
-	spi_release_transport(ahc_linux_transport_template);
-	ahc_linux_exit();
-	return -ENODEV;
+
+	ahc_linux_pci_init();
+	ahc_linux_eisa_init();
+	return 0;
 }
 
 static void

drivers/scsi/aic7xxx/aic7xxx_osm.h

@@ -132,7 +132,6 @@ typedef struct scsi_cmnd      *ahc_io_ctx_t;
 /************************* Configuration Data *********************************/
 extern u_int aic7xxx_no_probe;
 extern u_int aic7xxx_allow_memio;
-extern int aic7xxx_detect_complete;
 extern struct scsi_host_template aic7xxx_driver_template;
 
 /***************************** Bus Space/DMA **********************************/
@@ -510,15 +509,6 @@ void	ahc_format_transinfo(struct info_str *info,
 
 /******************************** Locking *************************************/
 /* Lock protecting internal data structures */
-static __inline void ahc_lockinit(struct ahc_softc *);
-static __inline void ahc_lock(struct ahc_softc *, unsigned long *flags);
-static __inline void ahc_unlock(struct ahc_softc *, unsigned long *flags);
-
-/* Lock held during ahc_list manipulation and ahc softc frees */
-extern spinlock_t ahc_list_spinlock;
-static __inline void ahc_list_lockinit(void);
-static __inline void ahc_list_lock(unsigned long *flags);
-static __inline void ahc_list_unlock(unsigned long *flags);
 
 static __inline void
 ahc_lockinit(struct ahc_softc *ahc)
@@ -538,24 +528,6 @@ ahc_unlock(struct ahc_softc *ahc, unsigned long *flags)
 	spin_unlock_irqrestore(&ahc->platform_data->spin_lock, *flags);
 }
 
-static __inline void
-ahc_list_lockinit(void)
-{
-	spin_lock_init(&ahc_list_spinlock);
-}
-
-static __inline void
-ahc_list_lock(unsigned long *flags)
-{
-	spin_lock_irqsave(&ahc_list_spinlock, *flags);
-}
-
-static __inline void
-ahc_list_unlock(unsigned long *flags)
-{
-	spin_unlock_irqrestore(&ahc_list_spinlock, *flags);
-}
-
 /******************************* PCI Definitions ******************************/
 /*
  * PCIM_xxx: mask to locate subfield in register
@@ -892,7 +864,6 @@ int	ahc_platform_abort_scbs(struct ahc_softc *ahc, int target,
 irqreturn_t
 	ahc_linux_isr(int irq, void *dev_id, struct pt_regs * regs);
 void	ahc_platform_flushwork(struct ahc_softc *ahc);
-int	ahc_softc_comp(struct ahc_softc *, struct ahc_softc *);
 void	ahc_done(struct ahc_softc*, struct scb*);
 void	ahc_send_async(struct ahc_softc *, char channel,
 		       u_int target, u_int lun, ac_code, void *);

drivers/scsi/aic7xxx/aic7xxx_osm_pci.c

@@ -143,10 +143,6 @@ ahc_linux_pci_dev_remove(struct pci_dev *pdev)
 	struct ahc_softc *ahc = pci_get_drvdata(pdev);
 	u_long s;
 
-	ahc_list_lock(&s);
-	TAILQ_REMOVE(&ahc_tailq, ahc, links);
-	ahc_list_unlock(&s);
-
 	ahc_lock(ahc, &s);
 	ahc_intr_enable(ahc, FALSE);
 	ahc_unlock(ahc, &s);
@@ -208,8 +204,7 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return (-error);
 	}
 	pci_set_drvdata(pdev, ahc);
-	if (aic7xxx_detect_complete)
-		ahc_linux_register_host(ahc, &aic7xxx_driver_template);
+	ahc_linux_register_host(ahc, &aic7xxx_driver_template);
 	return (0);
 }
 

drivers/scsi/aic7xxx/aic7xxx_pci.c

@@ -704,7 +704,6 @@ ahc_find_pci_device(ahc_dev_softc_t pci)
 int
 ahc_pci_config(struct ahc_softc *ahc, struct ahc_pci_identity *entry)
 {
-	u_long	 l;
 	u_int	 command;
 	u_int	 our_id;
 	u_int	 sxfrctl1;
@@ -964,12 +963,7 @@ ahc_pci_config(struct ahc_softc *ahc, struct ahc_pci_identity *entry)
 	if (error != 0)
 		return (error);
 
-	ahc_list_lock(&l);
-	/*
-	 * Link this softc in with all other ahc instances.
-	 */
-	ahc_softc_insert(ahc);
-	ahc_list_unlock(&l);
+	ahc->init_level++;
 	return (0);
 }
 

drivers/scsi/aic7xxx/aic7xxx_proc.c

@@ -155,9 +155,9 @@ ahc_dump_target_state(struct ahc_softc *ahc, struct info_str *info,
 	copy_info(info, "\tUser: ");
 	ahc_format_transinfo(info, &tinfo->user);
 	starget = ahc->platform_data->starget[target_offset];
-	targ = scsi_transport_target_data(starget);
-	if (targ == NULL)
+	if (!starget)
 		return;
+	targ = scsi_transport_target_data(starget);
 
 	copy_info(info, "\tGoal: ");
 	ahc_format_transinfo(info, &tinfo->goal);

drivers/scsi/aic7xxx_old.c

@@ -8448,7 +8448,6 @@ aic7xxx_alloc(Scsi_Host_Template *sht, struct aic7xxx_host *temp)
     }
     p->host_no = host->host_no;
   }
-  scsi_set_device(host, &p->pdev->dev);
   return (p);
 }
 

drivers/scsi/cpqfcTSinit.c

@@ -336,7 +336,6 @@ int cpqfcTS_detect(Scsi_Host_Template *ScsiHostTemplate)
       DEBUG_PCI(printk("  PciDev->baseaddress[3]= %lx\n", 
 				PciDev->resource[3].start));
 
-      scsi_set_device(HostAdapter, &PciDev->dev);
       HostAdapter->irq = PciDev->irq;  // copy for Scsi layers
       
       // HP Tachlite uses two (255-byte) ranges of Port I/O (lower & upper),

drivers/scsi/dpt_i2o.c

@@ -382,7 +382,6 @@ static int adpt_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
 {
 	adpt_hba* pHba = NULL;
 	struct adpt_device* pDev = NULL;	/* dpt per device information */
-	ulong timeout = jiffies + (TMOUT_SCSI*HZ);
 
 	cmd->scsi_done = done;
 	/*
@@ -418,11 +417,6 @@ static int adpt_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
 		return 1;
 	}
 
-	if(cmd->eh_state != SCSI_STATE_QUEUED){
-		// If we are not doing error recovery
-		mod_timer(&cmd->eh_timeout, timeout);
-	}
-
 	// TODO if the cmd->device if offline then I may need to issue a bus rescan
 	// followed by a get_lct to see if the device is there anymore
 	if((pDev = (struct adpt_device*) (cmd->device->hostdata)) == NULL) {

drivers/scsi/eata.c

@@ -1899,16 +1899,6 @@ static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
 			printk("%s: abort, mbox %d, interrupt pending.\n",
 			       ha->board_name, i);
 
-		if (SCarg->eh_state == SCSI_STATE_TIMEOUT) {
-			unmap_dma(i, ha);
-			SCarg->host_scribble = NULL;
-			ha->cp_stat[i] = FREE;
-			printk
-			    ("%s, abort, mbox %d, eh_state timeout, pid %ld.\n",
-			     ha->board_name, i, SCarg->pid);
-			return SUCCESS;
-		}
-
 		return FAILED;
 	}
 

drivers/scsi/eata_pio.c

@@ -449,7 +449,7 @@ static int eata_pio_abort(struct scsi_cmnd *cmd)
 {
 	uint loop = HZ;
 
-	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_abort called pid: %ld " "target: %x lun: %x reason %x\n", cmd->pid, cmd->device->id, cmd->device->lun, cmd->abort_reason));
+	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_abort called pid: %ld " "target: %x lun: %x\n", cmd->pid, cmd->device->id, cmd->device->lun));
 
 
 	while (inb(cmd->device->host->base + HA_RAUXSTAT) & HA_ABUSY)
@@ -484,7 +484,7 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd)
 	struct scsi_cmnd *sp;
 	struct Scsi_Host *host = cmd->device->host;
 
-	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset called pid:%ld target:" " %x lun: %x reason %x\n", cmd->pid, cmd->device->id, cmd->device->lun, cmd->abort_reason));
+	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset called pid:%ld target:" " %x lun: %x\n", cmd->pid, cmd->device->id, cmd->device->lun));
 
 	spin_lock_irq(host->host_lock);
 

drivers/scsi/fdomain.c

@@ -938,7 +938,6 @@ struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt )
    }
    shpnt->irq = interrupt_level;
    shpnt->io_port = port_base;
-   scsi_set_device(shpnt, &pdev->dev);
    shpnt->n_io_port = 0x10;
    print_banner( shpnt );
 

drivers/scsi/gdth.c

@@ -4521,9 +4521,7 @@ static int __init gdth_detect(Scsi_Host_Template *shtp)
             ha->virt_bus = hdr_channel;
 
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-            scsi_set_device(shp, &pcistr[ctr].pdev->dev);
-#else
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
             scsi_set_pci_device(shp, pcistr[ctr].pdev);
 #endif
             if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||

drivers/scsi/hosts.c

@@ -180,11 +180,6 @@ static void scsi_host_dev_release(struct device *dev)
 	scsi_destroy_command_freelist(shost);
 	kfree(shost->shost_data);
 
-	/*
-	 * Some drivers (eg aha1542) do scsi_register()/scsi_unregister()
-	 * during probing without performing a scsi_set_device() in between.
-	 * In this case dev->parent is NULL.
-	 */
 	if (parent)
 		put_device(parent);
 	kfree(shost);

drivers/scsi/ibmvscsi/ibmvscsi.c

@@ -87,7 +87,7 @@ static int max_channel = 3;
 static int init_timeout = 5;
 static int max_requests = 50;
 
-#define IBMVSCSI_VERSION "1.5.5"
+#define IBMVSCSI_VERSION "1.5.6"
 
 MODULE_DESCRIPTION("IBM Virtual SCSI");
 MODULE_AUTHOR("Dave Boutcher");
@@ -675,8 +675,6 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 	struct viosrp_adapter_info *req;
 	struct srp_event_struct *evt_struct;
 	
-	memset(&hostdata->madapter_info, 0x00, sizeof(hostdata->madapter_info));
-	
 	evt_struct = get_event_struct(&hostdata->pool);
 	if (!evt_struct) {
 		printk(KERN_ERR "ibmvscsi: couldn't allocate an event "

drivers/scsi/ibmvscsi/rpa_vscsi.c

@@ -33,6 +33,10 @@
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include "ibmvscsi.h"
+#include "srp.h"
+
+static char partition_name[97] = "UNKNOWN";
+static unsigned int partition_number = -1;
 
 /* ------------------------------------------------------------
  * Routines for managing the command/response queue
@@ -148,6 +152,48 @@ static void ibmvscsi_task(void *data)
 	}
 }
 
+static void gather_partition_info(void)
+{
+	struct device_node *rootdn;
+
+	char *ppartition_name;
+	unsigned int *p_number_ptr;
+
+	/* Retrieve information about this partition */
+	rootdn = find_path_device("/");
+	if (!rootdn) {
+		return;
+	}
+
+	ppartition_name =
+		get_property(rootdn, "ibm,partition-name", NULL);
+	if (ppartition_name)
+		strncpy(partition_name, ppartition_name,
+				sizeof(partition_name));
+	p_number_ptr =
+		(unsigned int *)get_property(rootdn, "ibm,partition-no",
+					     NULL);
+	if (p_number_ptr)
+		partition_number = *p_number_ptr;
+}
+
+static void set_adapter_info(struct ibmvscsi_host_data *hostdata)
+{
+	memset(&hostdata->madapter_info, 0x00,
+			sizeof(hostdata->madapter_info));
+
+	printk(KERN_INFO "rpa_vscsi: SPR_VERSION: %s\n", SRP_VERSION);
+	strcpy(hostdata->madapter_info.srp_version, SRP_VERSION);
+
+	strncpy(hostdata->madapter_info.partition_name, partition_name,
+			sizeof(hostdata->madapter_info.partition_name));
+
+	hostdata->madapter_info.partition_number = partition_number;
+
+	hostdata->madapter_info.mad_version = 1;
+	hostdata->madapter_info.os_type = 2;
+}
+
 /**
  * initialize_crq_queue: - Initializes and registers CRQ with hypervisor
  * @queue:	crq_queue to initialize and register
@@ -177,6 +223,9 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 	if (dma_mapping_error(queue->msg_token))
 		goto map_failed;
 
+	gather_partition_info();
+	set_adapter_info(hostdata);
+
 	rc = plpar_hcall_norets(H_REG_CRQ,
 				vdev->unit_address,
 				queue->msg_token, PAGE_SIZE);
@@ -246,6 +295,8 @@ void ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 	memset(queue->msgs, 0x00, PAGE_SIZE);
 	queue->cur = 0;
 
+	set_adapter_info(hostdata);
+
 	/* And re-open it again */
 	rc = plpar_hcall_norets(H_REG_CRQ,
 				vdev->unit_address,

drivers/scsi/ibmvscsi/srp.h

@@ -28,6 +28,8 @@
 #ifndef SRP_H
 #define SRP_H
 
+#define SRP_VERSION "16.a"
+
 #define PACKED __attribute__((packed))
 
 enum srp_types {

drivers/scsi/ips.h

@@ -111,7 +111,7 @@
       #define IPS_UNREGISTER_HOSTS(SHT)
       #define IPS_ADD_HOST(shost,device)   do { scsi_add_host(shost,device); scsi_scan_host(shost); } while (0)
       #define IPS_REMOVE_HOST(shost)       scsi_remove_host(shost)
-      #define IPS_SCSI_SET_DEVICE(sh,ha)   scsi_set_device(sh, &(ha)->pcidev->dev)
+      #define IPS_SCSI_SET_DEVICE(sh,ha)   do { } while (0)
       #define IPS_PRINTK(level, pcidev, format, arg...)                 \
             dev_printk(level , &((pcidev)->dev) , format , ## arg)
    #endif

drivers/scsi/libata-core.c

@@ -2866,7 +2866,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
 	if (qc->dev->class == ATA_DEV_ATAPI && qc->scsicmd) {
 		struct scsi_cmnd *cmd = qc->scsicmd;
 
-		if (!scsi_eh_eflags_chk(cmd, SCSI_EH_CANCEL_CMD)) {
+		if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) {
 
 			/* finish completing original command */
 			__ata_qc_complete(qc);
@@ -3750,7 +3750,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
 	host->max_channel = 1;
 	host->unique_id = ata_unique_id++;
 	host->max_cmd_len = 12;
-	scsi_set_device(host, ent->dev);
+
 	scsi_assign_lock(host, &host_set->lock);
 
 	ap->flags = ATA_FLAG_PORT_DISABLED;

drivers/scsi/lpfc/Makefile

@@ -1,26 +1,24 @@
 #/*******************************************************************
 # * This file is part of the Emulex Linux Device Driver for         *
-# * Enterprise Fibre Channel Host Bus Adapters.                     *
-# * Refer to the README file included with this package for         *
-# * driver version and adapter support.                             *
-# * Copyright (C) 2004 Emulex Corporation.                          *
+# * Fibre Channel Host Bus Adapters.                                *
+# * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+# * EMULEX and SLI are trademarks of Emulex.                        *
 # * www.emulex.com                                                  *
 # *                                                                 *
 # * This program is free software; you can redistribute it and/or   *
-# * modify it under the terms of the GNU General Public License     *
-# * as published by the Free Software Foundation; either version 2  *
-# * of the License, or (at your option) any later version.          *
-# *                                                                 *
-# * This program is distributed in the hope that it will be useful, *
-# * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
-# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
-# * GNU General Public License for more details, a copy of which    *
-# * can be found in the file COPYING included with this package.    *
+# * modify it under the terms of version 2 of the GNU General       *
+# * Public License as published by the Free Software Foundation.    *
+# * This program is distributed in the hope that it will be useful. *
+# * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+# * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+# * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+# * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+# * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+# * more details, a copy of which can be found in the file COPYING  *
+# * included with this package.                                     *
 # *******************************************************************/
 ######################################################################
 
-#$Id: Makefile 1.58 2005/01/23 19:00:32EST sf_support Exp  $
-
 ifneq ($(GCOV),)
   EXTRA_CFLAGS += -fprofile-arcs -ftest-coverage
   EXTRA_CFLAGS += -O0

drivers/scsi/lpfc/lpfc.h

@@ -1,27 +1,24 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
-/*
- * $Id: lpfc.h 1.167 2005/04/07 08:47:05EDT sf_support Exp  $
- */
-
 struct lpfc_sli2_slim;
 
 #define LPFC_MAX_TARGET         256	/* max targets supported */

drivers/scsi/lpfc/lpfc_attr.c

@@ -1,27 +1,24 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
-/*
- * $Id: lpfc_attr.c 1.24 2005/04/13 11:58:55EDT sf_support Exp  $
- */
-
 #include <linux/ctype.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>

drivers/scsi/lpfc/lpfc_compat.h

@@ -1,26 +1,24 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
 /*
- * $Id: lpfc_compat.h 1.32 2005/01/25 17:51:45EST sf_support Exp  $
- *
  * This file provides macros to aid compilation in the Linux 2.4 kernel
  * over various platform architectures.
  */

drivers/scsi/lpfc/lpfc_crtn.h

@@ -1,27 +1,23 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
-/*
- * $Id: lpfc_crtn.h 1.166 2005/04/07 08:46:47EDT sf_support Exp  $
- */
-
 void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
 void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
@@ -195,6 +191,9 @@ int lpfc_sli_issue_iocb_wait_high_priority(struct lpfc_hba * phba,
 void lpfc_sli_wake_iocb_high_priority(struct lpfc_hba * phba,
 				      struct lpfc_iocbq * queue1,
 				      struct lpfc_iocbq * queue2);
+void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba * phba,
+			     struct lpfc_iocbq * cmdiocb,
+			     struct lpfc_iocbq * rspiocb);
 
 void *lpfc_mbuf_alloc(struct lpfc_hba *, int, dma_addr_t *);
 void lpfc_mbuf_free(struct lpfc_hba *, void *, dma_addr_t);

drivers/scsi/lpfc/lpfc_ct.c

@@ -1,26 +1,24 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
 /*
- * $Id: lpfc_ct.c 1.161 2005/04/13 11:59:01EDT sf_support Exp  $
- *
  * Fibre Channel SCSI LAN Device Driver CT support
  */
 

drivers/scsi/lpfc/lpfc_disc.h

@@ -1,27 +1,23 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
-/*
- * $Id: lpfc_disc.h 1.61 2005/04/07 08:46:52EDT sf_support Exp  $
- */
-
 #define FC_MAX_HOLD_RSCN     32	      /* max number of deferred RSCNs */
 #define FC_MAX_NS_RSP        65536    /* max size NameServer rsp */
 #define FC_MAXLOOP           126      /* max devices supported on a fc loop */

drivers/scsi/lpfc/lpfc_els.c

@@ -1,27 +1,24 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
-/*
- * $Id: lpfc_els.c 1.186 2005/04/13 14:26:55EDT sf_support Exp  $
- */
-
 #include <linux/blkdev.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
@@ -3139,7 +3136,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 	case ELS_CMD_PLOGI:
 		phba->fc_stat.elsRcvPLOGI++;
 		if (phba->hba_state < LPFC_DISC_AUTH) {
-			rjt_err = LSEXP_NOTHING_MORE;
+			rjt_err = 1;
 			break;
 		}
 		lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PLOGI);
@@ -3154,7 +3151,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 	case ELS_CMD_LOGO:
 		phba->fc_stat.elsRcvLOGO++;
 		if (phba->hba_state < LPFC_DISC_AUTH) {
-			rjt_err = LSEXP_NOTHING_MORE;
+			rjt_err = 1;
 			break;
 		}
 		lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_LOGO);
@@ -3162,7 +3159,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 	case ELS_CMD_PRLO:
 		phba->fc_stat.elsRcvPRLO++;
 		if (phba->hba_state < LPFC_DISC_AUTH) {
-			rjt_err = LSEXP_NOTHING_MORE;
+			rjt_err = 1;
 			break;
 		}
 		lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PRLO);
@@ -3177,7 +3174,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 	case ELS_CMD_ADISC:
 		phba->fc_stat.elsRcvADISC++;
 		if (phba->hba_state < LPFC_DISC_AUTH) {
-			rjt_err = LSEXP_NOTHING_MORE;
+			rjt_err = 1;
 			break;
 		}
 		lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_ADISC);
@@ -3185,7 +3182,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 	case ELS_CMD_PDISC:
 		phba->fc_stat.elsRcvPDISC++;
 		if (phba->hba_state < LPFC_DISC_AUTH) {
-			rjt_err = LSEXP_NOTHING_MORE;
+			rjt_err = 1;
 			break;
 		}
 		lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PDISC);
@@ -3209,7 +3206,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 	case ELS_CMD_PRLI:
 		phba->fc_stat.elsRcvPRLI++;
 		if (phba->hba_state < LPFC_DISC_AUTH) {
-			rjt_err = LSEXP_NOTHING_MORE;
+			rjt_err = 1;
 			break;
 		}
 		lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PRLI);
@@ -3220,7 +3217,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 		break;
 	default:
 		/* Unsupported ELS command, reject */
-		rjt_err = LSEXP_NOTHING_MORE;
+		rjt_err = 1;
 
 		/* Unknown ELS command <elsCmd> received from NPORT <did> */
 		lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
@@ -3236,7 +3233,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
 	if (rjt_err) {
 		stat.un.b.lsRjtRsvd0 = 0;
 		stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
-		stat.un.b.lsRjtRsnCodeExp = rjt_err;
+		stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
 		stat.un.b.vendorUnique = 0;
 		lpfc_els_rsp_reject(phba, stat.un.lsRjtError, elsiocb, ndlp);
 	}

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -1,27 +1,24 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
-/*
- * $Id: lpfc_hbadisc.c 1.266 2005/04/13 11:59:06EDT sf_support Exp  $
- */
-
 #include <linux/blkdev.h>
 #include <linux/pci.h>
 #include <linux/kthread.h>
@@ -61,14 +58,7 @@ static void lpfc_disc_timeout_handler(struct lpfc_hba *);
 static void
 lpfc_process_nodev_timeout(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 {
-	if (!(ndlp->nlp_type & NLP_FABRIC)) {
-		/* Nodev timeout on NPort <nlp_DID> */
-		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
-			"%d:0203 Nodev timeout on NPort x%x "
-			"Data: x%x x%x x%x\n",
-			phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag,
-			ndlp->nlp_state, ndlp->nlp_rpi);
-	}
+	int warn_on = 0;
 
 	spin_lock_irq(phba->host->host_lock);
 	if (!(ndlp->nlp_flag & NLP_NODEV_TMO)) {
@@ -79,12 +69,27 @@ lpfc_process_nodev_timeout(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	ndlp->nlp_flag &= ~NLP_NODEV_TMO;
 
 	if (ndlp->nlp_sid != NLP_NO_SID) {
+		warn_on = 1;
 		/* flush the target */
 		lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
 			ndlp->nlp_sid, 0, 0, LPFC_CTX_TGT);
 	}
 	spin_unlock_irq(phba->host->host_lock);
 
+	if (warn_on) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+				"%d:0203 Nodev timeout on NPort x%x "
+				"Data: x%x x%x x%x\n",
+				phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag,
+				ndlp->nlp_state, ndlp->nlp_rpi);
+	} else {
+		lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
+				"%d:0204 Nodev timeout on NPort x%x "
+				"Data: x%x x%x x%x\n",
+				phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag,
+				ndlp->nlp_state, ndlp->nlp_rpi);
+	}
+
 	lpfc_disc_state_machine(phba, ndlp, NULL, NLP_EVT_DEVICE_RM);
 	return;
 }

drivers/scsi/lpfc/lpfc_hw.h

@@ -1,27 +1,23 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
-/*
- * $Id: lpfc_hw.h 1.37 2005/03/29 19:51:45EST sf_support Exp  $
- */
-
 #define FDMI_DID        0xfffffaU
 #define NameServer_DID  0xfffffcU
 #define SCR_DID         0xfffffdU
@@ -2214,20 +2210,20 @@ typedef union {
  * SLI-2 specific structures
  */
 
-typedef struct {
-	uint32_t cmdPutInx;
-	uint32_t rspGetInx;
-} HGP;
+struct lpfc_hgp {
+	__le32 cmdPutInx;
+	__le32 rspGetInx;
+};
 
-typedef struct {
-	uint32_t cmdGetInx;
-	uint32_t rspPutInx;
-} PGP;
+struct lpfc_pgp {
+	__le32 cmdGetInx;
+	__le32 rspPutInx;
+};
 
 typedef struct _SLI2_DESC {
-	HGP host[MAX_RINGS];
+	struct lpfc_hgp host[MAX_RINGS];
 	uint32_t unused1[16];
-	PGP port[MAX_RINGS];
+	struct lpfc_pgp port[MAX_RINGS];
 } SLI2_DESC;
 
 typedef union {

drivers/scsi/lpfc/lpfc_init.c

@@ -1,27 +1,24 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
- * Enterprise Fibre Channel Host Bus Adapters.                     *
- * Refer to the README file included with this package for         *
- * driver version and adapter support.                             *
- * Copyright (C) 2004 Emulex Corporation.                          *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of the GNU General Public License     *
- * as published by the Free Software Foundation; either version 2  *
- * of the License, or (at your option) any later version.          *
- *                                                                 *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of  *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   *
- * GNU General Public License for more details, a copy of which    *
- * can be found in the file COPYING included with this package.    *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
  *******************************************************************/
 
-/*
- * $Id: lpfc_init.c 1.233 2005/04/13 11:59:09EDT sf_support Exp  $
- */
-
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
@@ -780,6 +777,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp)
 	pci_read_config_dword(phba->pcidev, PCI_VENDOR_ID, &id);
 
 	switch ((id >> 16) & 0xffff) {
+	case PCI_DEVICE_ID_FIREFLY:
+		strcpy(str, "LP6000 1");
+		break;
 	case PCI_DEVICE_ID_SUPERFLY:
 		if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
 			strcpy(str, "LP7000 1");
@@ -837,6 +837,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp)
 	case PCI_DEVICE_ID_LP10000S:
 		strcpy(str, "LP10000-S 2");
 		break;
+	default:
+		memset(str, 0, 16);
+		break;
 	}
 	if (mdp)
 		sscanf(str, "%s", mdp);
@@ -1662,6 +1665,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 static struct pci_device_id lpfc_id_table[] = {
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
 		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY,
+		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_THOR,
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PEGASUS,
@@ -1712,6 +1717,7 @@ lpfc_init(void)
 	int error = 0;
 
 	printk(LPFC_MODULE_DESC "\n");
+	printk(LPFC_COPYRIGHT "\n");
 
 	lpfc_transport_template =
 				fc_attach_transport(&lpfc_transport_functions);