mtd: fsmc_nand: pass the ale and cmd resource via resource

Do not use the platform_data to pass resource and be smart in the drivers.
Just pass it via resource

Switch to devm_request_and_ioremap at the sametime

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-By: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

Documentation/devicetree/bindings/mtd/fsmc-nand.txt

@@ -3,9 +3,7 @@
 Required properties:
 - compatible : "st,spear600-fsmc-nand"
 - reg : Address range of the mtd chip
-- reg-names: Should contain the reg names "fsmc_regs" and "nand_data"
-- st,ale-off : Chip specific offset to ALE
-- st,cle-off : Chip specific offset to CLE
+- reg-names: Should contain the reg names "fsmc_regs", "nand_data", "nand_addr" and "nand_cmd"
 
 Optional properties:
 - bank-width : Width (in bytes) of the device.  If not present, the width
@@ -19,10 +17,10 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0xd1800000 0x1000	/* FSMC Register */
-		       0xd2000000 0x4000>;	/* NAND Base */
-		reg-names = "fsmc_regs", "nand_data";
-		st,ale-off = <0x20000>;
-		st,cle-off = <0x10000>;
+		       0xd2000000 0x0010	/* NAND Base DATA */
+		       0xd2020000 0x0010	/* NAND Base ADDR */
+		       0xd2010000 0x0010>;	/* NAND Base CMD */
+		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 
 		bank-width = <1>;
 		nand-skip-bbtscan;

arch/arm/boot/dts/spear13xx.dtsi

@@ -104,15 +104,15 @@
 			compatible = "st,spear600-fsmc-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0xb0000000 0x1000	/* FSMC Register */
-			       0xb0800000 0x0010>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
+			reg = <0xb0000000 0x1000	/* FSMC Register*/
+			       0xb0800000 0x0010	/* NAND Base DATA */
+			       0xb0820000 0x0010	/* NAND Base ADDR */
+			       0xb0810000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			interrupts = <0 20 0x4
 				      0 21 0x4
 				      0 22 0x4
 				      0 23 0x4>;
-			st,ale-off = <0x20000>;
-			st,cle-off = <0x10000>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/spear300.dtsi

@@ -38,10 +38,10 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x94000000 0x1000	/* FSMC Register */
-			       0x80000000 0x0010>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
-			st,ale-off = <0x20000>;
-			st,cle-off = <0x10000>;
+			       0x80000000 0x0010	/* NAND Base DATA */
+			       0x80020000 0x0010	/* NAND Base ADDR */
+			       0x80010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/spear310.dtsi

@@ -32,10 +32,10 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x44000000 0x1000	/* FSMC Register */
-			       0x40000000 0x0010>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
-			st,ale-off = <0x10000>;
-			st,cle-off = <0x20000>;
+			       0x40000000 0x0010	/* NAND Base DATA */
+			       0x40020000 0x0010	/* NAND Base ADDR */
+			       0x40010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/spear320.dtsi

@@ -38,10 +38,10 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x4c000000 0x1000	/* FSMC Register */
-			       0x50000000 0x0010>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
-			st,ale-off = <0x20000>;
-			st,cle-off = <0x10000>;
+			       0x50000000 0x0010	/* NAND Base DATA */
+			       0x50020000 0x0010	/* NAND Base ADDR */
+			       0x50010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/spear600.dtsi

@@ -67,10 +67,10 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0xd1800000 0x1000	/* FSMC Register */
-			       0xd2000000 0x4000>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
-			st,ale-off = <0x20000>;
-			st,cle-off = <0x10000>;
+			       0xd2000000 0x0010	/* NAND Base DATA */
+			       0xd2020000 0x0010	/* NAND Base ADDR */
+			       0xd2010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			status = "disabled";
 		};
 

arch/arm/mach-u300/core.c

@@ -251,6 +251,18 @@ static struct resource rtc_resources[] = {
  * but these are not yet used by the driver.
  */
 static struct resource fsmc_resources[] = {
+	{
+		.name  = "nand_addr",
+		.start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE,
+		.end   = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "nand_cmd",
+		.start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE,
+		.end   = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
 	{
 		.name  = "nand_data",
 		.start = U300_NAND_CS0_PHYS_BASE,
@@ -1496,8 +1508,6 @@ static struct fsmc_nand_platform_data nand_platform_data = {
 	.nr_partitions = ARRAY_SIZE(u300_partitions),
 	.options = NAND_SKIP_BBTSCAN,
 	.width = FSMC_NAND_BW8,
-	.ale_off = PLAT_NAND_ALE,
-	.cle_off = PLAT_NAND_CLE,
 };
 
 static struct platform_device nand_device = {

drivers/mtd/nand/fsmc_nand.c

@@ -876,8 +876,6 @@ static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev,
 			return -EINVAL;
 		}
 	}
-	of_property_read_u32(np, "st,ale-off", &pdata->ale_off);
-	of_property_read_u32(np, "st,cle-off", &pdata->cle_off);
 	if (of_get_property(np, "nand-skip-bbtscan", NULL))
 		pdata->options = NAND_SKIP_BBTSCAN;
 
@@ -935,41 +933,28 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 	if (!res)
 		return -EINVAL;
 
-	if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
-				pdev->name)) {
-		dev_err(&pdev->dev, "Failed to get memory data resourse\n");
-		return -ENOENT;
-	}
-
-	host->data_pa = (dma_addr_t)res->start;
-	host->data_va = devm_ioremap(&pdev->dev, res->start,
-			resource_size(res));
+	host->data_va = devm_request_and_ioremap(&pdev->dev, res);
 	if (!host->data_va) {
 		dev_err(&pdev->dev, "data ioremap failed\n");
 		return -ENOMEM;
 	}
+	host->data_pa = (dma_addr_t)res->start;
 
-	if (!devm_request_mem_region(&pdev->dev, res->start + pdata->ale_off,
-			resource_size(res), pdev->name)) {
-		dev_err(&pdev->dev, "Failed to get memory ale resourse\n");
-		return -ENOENT;
-	}
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
+	if (!res)
+		return -EINVAL;
 
-	host->addr_va = devm_ioremap(&pdev->dev, res->start + pdata->ale_off,
-			resource_size(res));
+	host->addr_va = devm_request_and_ioremap(&pdev->dev, res);
 	if (!host->addr_va) {
 		dev_err(&pdev->dev, "ale ioremap failed\n");
 		return -ENOMEM;
 	}
 
-	if (!devm_request_mem_region(&pdev->dev, res->start + pdata->cle_off,
-			resource_size(res), pdev->name)) {
-		dev_err(&pdev->dev, "Failed to get memory cle resourse\n");
-		return -ENOENT;
-	}
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
+	if (!res)
+		return -EINVAL;
 
-	host->cmd_va = devm_ioremap(&pdev->dev, res->start + pdata->cle_off,
-			resource_size(res));
+	host->cmd_va = devm_request_and_ioremap(&pdev->dev, res);
 	if (!host->cmd_va) {
 		dev_err(&pdev->dev, "ale ioremap failed\n");
 		return -ENOMEM;
@@ -979,14 +964,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 	if (!res)
 		return -EINVAL;
 
-	if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
-			pdev->name)) {
-		dev_err(&pdev->dev, "Failed to get memory regs resourse\n");
-		return -ENOENT;
-	}
-
-	host->regs_va = devm_ioremap(&pdev->dev, res->start,
-			resource_size(res));
+	host->regs_va = devm_request_and_ioremap(&pdev->dev, res);
 	if (!host->regs_va) {
 		dev_err(&pdev->dev, "regs ioremap failed\n");
 		return -ENOMEM;

include/linux/mtd/fsmc.h

@@ -155,9 +155,6 @@ struct fsmc_nand_platform_data {
 	unsigned int		width;
 	unsigned int		bank;
 
-	/* CLE, ALE offsets */
-	unsigned int		cle_off;
-	unsigned int		ale_off;
 	enum access_mode	mode;
 
 	void			(*select_bank)(uint32_t bank, uint32_t busw);