Merge branch 'exynos/dt' into late/dt

* exynos/dt: (125 commits)
  ARM: dts: add PDMA0 changes for exynos5440
  ARM: dts: Add cpufreq controller node for Exynos5440 SoC
  ARM: dts: Fix gmac clock ids due to changes in Exynos5440
  ARM: dts: add device tree file for SD5v1 board
  ARM: dts: update bootargs to boot from sda2 for exynos5440-ssdk5440
  ARM: dts: add PMU support in exynos5440
  ARM: dts: Add node for GMAC for exynos5440
  ARM: dts: list the interrupts generated by pin-controller on Exynos5440
  ARM: dts: Add FIMD DT binding Documentation
  ARM: dts: Add FIMD node and display timing node to exynos4412-origen.dts
  ARM: dts: Add FIMD node to exynos4
  ARM: dts: Add SYSREG block node for S5P/Exynos4 SoC series
  ARM: dts: Add display timing node to exynos5250-smdk5250.dts
  ARM: dts: Add FIMD node to exynos5
  ARM: dts: Add virtual GIC DT bindings for exynos5440
  ARM: dts: Document usb clocks in samsung,exynos4210-ehci/ohci bindings
  ARM: dts: add usb 2.0 clock references to exynos5250 device tree
  ARM: dts: Add architected timer nodes for exynos5250
  ARM: dts: Declare the gic as a15 compatible for exynos5250
  ARM: dts: Add HDMI HPD and regulator node for Arndale board
  ...

Documentation/devicetree/bindings/arm/samsung/sysreg.txt

@@ -0,0 +1,7 @@
+SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
+
+Properties:
+ - name : should be 'sysreg';
+ - compatible : should contain "samsung,<chip name>-sysreg", "syscon";
+   For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon";
+ - reg : offset and length of the register set.

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -0,0 +1,288 @@
+* Samsung Exynos4 Clock Controller
+
+The Exynos4 clock controller generates and supplies clock to various controllers
+within the Exynos4 SoC. The clock binding described here is applicable to all
+SoC's in the Exynos4 family.
+
+Required Properties:
+
+- comptible: should be one of the following.
+  - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
+  - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+
+		 [Core Clocks]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  xxti                1
+  xusbxti             2
+  fin_pll             3
+  fout_apll           4
+  fout_mpll           5
+  fout_epll           6
+  fout_vpll           7
+  sclk_apll           8
+  sclk_mpll           9
+  sclk_epll           10
+  sclk_vpll           11
+  arm_clk             12
+  aclk200             13
+  aclk100             14
+  aclk160             15
+  aclk133             16
+  mout_mpll_user_t    17      Exynos4x12
+  mout_mpll_user_c    18      Exynos4x12
+  mout_core           19
+  mout_apll           20
+
+
+            [Clock Gate for Special Clocks]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  sclk_fimc0          128
+  sclk_fimc1          129
+  sclk_fimc2          130
+  sclk_fimc3          131
+  sclk_cam0           132
+  sclk_cam1           133
+  sclk_csis0          134
+  sclk_csis1          135
+  sclk_hdmi           136
+  sclk_mixer          137
+  sclk_dac            138
+  sclk_pixel          139
+  sclk_fimd0          140
+  sclk_mdnie0         141     Exynos4412
+  sclk_mdnie_pwm0 12  142     Exynos4412
+  sclk_mipi0          143
+  sclk_audio0         144
+  sclk_mmc0           145
+  sclk_mmc1           146
+  sclk_mmc2           147
+  sclk_mmc3           148
+  sclk_mmc4           149
+  sclk_sata           150     Exynos4210
+  sclk_uart0          151
+  sclk_uart1          152
+  sclk_uart2          153
+  sclk_uart3          154
+  sclk_uart4          155
+  sclk_audio1         156
+  sclk_audio2         157
+  sclk_spdif          158
+  sclk_spi0           159
+  sclk_spi1           160
+  sclk_spi2           161
+  sclk_slimbus        162
+  sclk_fimd1          163     Exynos4210
+  sclk_mipi1          164     Exynos4210
+  sclk_pcm1           165
+  sclk_pcm2           166
+  sclk_i2s1           167
+  sclk_i2s2           168
+  sclk_mipihsi        169     Exynos4412
+  sclk_mfc            170
+  sclk_pcm0           171
+  sclk_g3d            172
+  sclk_pwm_isp        173     Exynos4x12
+  sclk_spi0_isp       174     Exynos4x12
+  sclk_spi1_isp       175     Exynos4x12
+  sclk_uart_isp       176     Exynos4x12
+
+	      [Peripheral Clock Gates]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  fimc0               256
+  fimc1               257
+  fimc2               258
+  fimc3               259
+  csis0               260
+  csis1               261
+  jpeg                262
+  smmu_fimc0          263
+  smmu_fimc1          264
+  smmu_fimc2          265
+  smmu_fimc3          266
+  smmu_jpeg           267
+  vp                  268
+  mixer               269
+  tvenc               270     Exynos4210
+  hdmi                271
+  smmu_tv             272
+  mfc                 273
+  smmu_mfcl           274
+  smmu_mfcr           275
+  g3d                 276
+  g2d                 277     Exynos4210
+  rotator             278     Exynos4210
+  mdma                279     Exynos4210
+  smmu_g2d            280     Exynos4210
+  smmu_rotator        281     Exynos4210
+  smmu_mdma           282     Exynos4210
+  fimd0               283
+  mie0                284
+  mdnie0              285     Exynos4412
+  dsim0               286
+  smmu_fimd0          287
+  fimd1               288     Exynos4210
+  mie1                289     Exynos4210
+  dsim1               290     Exynos4210
+  smmu_fimd1          291     Exynos4210
+  pdma0               292
+  pdma1               293
+  pcie_phy            294
+  sata_phy            295     Exynos4210
+  tsi                 296
+  sdmmc0              297
+  sdmmc1              298
+  sdmmc2              299
+  sdmmc3              300
+  sdmmc4              301
+  sata                302     Exynos4210
+  sromc               303
+  usb_host            304
+  usb_device          305
+  pcie                306
+  onenand             307
+  nfcon               308
+  smmu_pcie           309
+  gps                 310
+  smmu_gps            311
+  uart0               312
+  uart1               313
+  uart2               314
+  uart3               315
+  uart4               316
+  i2c0                317
+  i2c1                318
+  i2c2                319
+  i2c3                320
+  i2c4                321
+  i2c5                322
+  i2c6                323
+  i2c7                324
+  i2c_hdmi            325
+  tsadc               326
+  spi0                327
+  spi1                328
+  spi2                329
+  i2s1                330
+  i2s2                331
+  pcm0                332
+  i2s0                333
+  pcm1                334
+  pcm2                335
+  pwm                 336
+  slimbus             337
+  spdif               338
+  ac97                339
+  modemif             340
+  chipid              341
+  sysreg              342
+  hdmi_cec            343
+  mct                 344
+  wdt                 345
+  rtc                 346
+  keyif               347
+  audss               348
+  mipi_hsi            349     Exynos4210
+  mdma2               350     Exynos4210
+  pixelasyncm0        351
+  pixelasyncm1        352
+  fimc_lite0          353     Exynos4x12
+  fimc_lite1          354     Exynos4x12
+  ppmuispx            355     Exynos4x12
+  ppmuispmx           356     Exynos4x12
+  fimc_isp            357     Exynos4x12
+  fimc_drc            358     Exynos4x12
+  fimc_fd             359     Exynos4x12
+  mcuisp              360     Exynos4x12
+  gicisp              361     Exynos4x12
+  smmu_isp            362     Exynos4x12
+  smmu_drc            363     Exynos4x12
+  smmu_fd             364     Exynos4x12
+  smmu_lite0          365     Exynos4x12
+  smmu_lite1          366     Exynos4x12
+  mcuctl_isp          367     Exynos4x12
+  mpwm_isp            368     Exynos4x12
+  i2c0_isp            369     Exynos4x12
+  i2c1_isp            370     Exynos4x12
+  mtcadc_isp          371     Exynos4x12
+  pwm_isp             372     Exynos4x12
+  wdt_isp             373     Exynos4x12
+  uart_isp            374     Exynos4x12
+  asyncaxim           375     Exynos4x12
+  smmu_ispcx          376     Exynos4x12
+  spi0_isp            377     Exynos4x12
+  spi1_isp            378     Exynos4x12
+  pwm_isp_sclk        379     Exynos4x12
+  spi0_isp_sclk       380     Exynos4x12
+  spi1_isp_sclk       381     Exynos4x12
+  uart_isp_sclk       382     Exynos4x12
+
+		[Mux Clocks]
+
+  Clock			ID	SoC (if specific)
+  -----------------------------------------------
+
+  mout_fimc0		384
+  mout_fimc1		385
+  mout_fimc2		386
+  mout_fimc3		387
+  mout_cam0		388
+  mout_cam1		389
+  mout_csis0		390
+  mout_csis1		391
+  mout_g3d0		392
+  mout_g3d1		393
+  mout_g3d		394
+  aclk400_mcuisp	395	Exynos4x12
+
+		[Div Clocks]
+
+  Clock			ID	SoC (if specific)
+  -----------------------------------------------
+
+  div_isp0		450	Exynos4x12
+  div_isp1		451	Exynos4x12
+  div_mcuisp0		452	Exynos4x12
+  div_mcuisp1		453	Exynos4x12
+  div_aclk200		454	Exynos4x12
+  div_aclk400_mcuisp	455	Exynos4x12
+
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
+	};

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -0,0 +1,177 @@
+* Samsung Exynos5250 Clock Controller
+
+The Exynos5250 clock controller generates and supplies clock to various
+controllers within the Exynos5250 SoC.
+
+Required Properties:
+
+- comptible: should be one of the following.
+  - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  fin_pll		1
+
+  [Clock Gate for Special Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  sclk_cam_bayer	128
+  sclk_cam0		129
+  sclk_cam1		130
+  sclk_gscl_wa		131
+  sclk_gscl_wb		132
+  sclk_fimd1		133
+  sclk_mipi1		134
+  sclk_dp		135
+  sclk_hdmi		136
+  sclk_pixel		137
+  sclk_audio0		138
+  sclk_mmc0		139
+  sclk_mmc1		140
+  sclk_mmc2		141
+  sclk_mmc3		142
+  sclk_sata		143
+  sclk_usb3		144
+  sclk_jpeg		145
+  sclk_uart0		146
+  sclk_uart1		147
+  sclk_uart2		148
+  sclk_uart3		149
+  sclk_pwm		150
+  sclk_audio1		151
+  sclk_audio2		152
+  sclk_spdif		153
+  sclk_spi0		154
+  sclk_spi1		155
+  sclk_spi2		156
+
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  gscl0			256
+  gscl1			257
+  gscl2			258
+  gscl3			259
+  gscl_wa		260
+  gscl_wb		261
+  smmu_gscl0		262
+  smmu_gscl1		263
+  smmu_gscl2		264
+  smmu_gscl3		265
+  mfc			266
+  smmu_mfcl		267
+  smmu_mfcr		268
+  rotator		269
+  jpeg			270
+  mdma1			271
+  smmu_rotator		272
+  smmu_jpeg		273
+  smmu_mdma1		274
+  pdma0			275
+  pdma1			276
+  sata			277
+  usbotg		278
+  mipi_hsi		279
+  sdmmc0		280
+  sdmmc1		281
+  sdmmc2		282
+  sdmmc3		283
+  sromc			284
+  usb2			285
+  usb3			286
+  sata_phyctrl		287
+  sata_phyi2c		288
+  uart0			289
+  uart1			290
+  uart2			291
+  uart3			292
+  uart4			293
+  i2c0			294
+  i2c1			295
+  i2c2			296
+  i2c3			297
+  i2c4			298
+  i2c5			299
+  i2c6			300
+  i2c7			301
+  i2c_hdmi		302
+  adc			303
+  spi0			304
+  spi1			305
+  spi2			306
+  i2s1			307
+  i2s2			308
+  pcm1			309
+  pcm2			310
+  pwm			311
+  spdif			312
+  ac97			313
+  hsi2c0		314
+  hsi2c1		315
+  hs12c2		316
+  hs12c3		317
+  chipid		318
+  sysreg		319
+  pmu			320
+  cmu_top		321
+  cmu_core		322
+  cmu_mem		323
+  tzpc0			324
+  tzpc1			325
+  tzpc2			326
+  tzpc3			327
+  tzpc4			328
+  tzpc5			329
+  tzpc6			330
+  tzpc7			331
+  tzpc8			332
+  tzpc9			333
+  hdmi_cec		334
+  mct			335
+  wdt			336
+  rtc			337
+  tmu			338
+  fimd1			339
+  mie1			340
+  dsim0			341
+  dp			342
+  mixer			343
+  hdmi			345
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5250-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
+	};

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

@@ -0,0 +1,61 @@
+* Samsung Exynos5440 Clock Controller
+
+The Exynos5440 clock controller generates and supplies clock to various
+controllers within the Exynos5440 SoC.
+
+Required Properties:
+
+- comptible: should be "samsung,exynos5440-clock".
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  xtal			1
+  arm_clk		2
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  spi_baud		16
+  pb0_250		17
+  pr0_250		18
+  pr1_250		19
+  b_250			20
+  b_125			21
+  b_200			22
+  sata			23
+  usb			24
+  gmac0			25
+  cs250			26
+  pb0_250_o		27
+  pr0_250_o		28
+  pr1_250_o		29
+  b_250_o		30
+  b_125_o		31
+  b_200_o		32
+  sata_o		33
+  usb_o			34
+  gmac0_o		35
+  cs250_o		36
+
+Example: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x10000>;
+		#clock-cells = <1>;
+	};

Documentation/devicetree/bindings/gpu/samsung-g2d.txt

@@ -0,0 +1,20 @@
+* Samsung 2D Graphics Accelerator
+
+Required properties:
+  - compatible : value should be one among the following:
+	(a) "samsung,s5pv210-g2d" for G2D IP present in S5PV210 & Exynos4210 SoC
+	(b) "samsung,exynos4212-g2d" for G2D IP present in Exynos4x12 SoCs
+	(c) "samsung,exynos5250-g2d" for G2D IP present in Exynos5250 SoC
+
+  - reg : Physical base address of the IP registers and length of memory
+	  mapped region.
+
+  - interrupts : G2D interrupt number to the CPU.
+
+Example:
+	g2d@12800000 {
+		compatible = "samsung,s5pv210-g2d";
+		reg = <0x12800000 0x1000>;
+		interrupts = <0 89 0>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -21,3 +21,24 @@ Required properties:
 
   - samsung,mfc-l : Base address of the second memory bank used by MFC
 		    for DMA contiguous memory allocation and its size.
+
+Optional properties:
+  - samsung,power-domain : power-domain property defined with a phandle
+			   to respective power domain.
+
+Example:
+SoC specific DT entry:
+
+mfc: codec@13400000 {
+	compatible = "samsung,mfc-v5";
+	reg = <0x13400000 0x10000>;
+	interrupts = <0 94 0>;
+	samsung,power-domain = <&pd_mfc>;
+};
+
+Board specific DT entry:
+
+codec@13400000 {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};

Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt

@@ -0,0 +1,68 @@
+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+  (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+  (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+  it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+  should be the order of the interrupts specified. The local timer interrupts
+  should be specified after the four global timer interrupts have been
+  specified.
+
+	0: Global Timer Interrupt 0
+	1: Global Timer Interrupt 1
+	2: Global Timer Interrupt 2
+	3: Global Timer Interrupt 3
+	4: Local Timer Interrupt 0
+	5: Local Timer Interrupt 1
+	6: ..
+	7: ..
+	i: Local Timer Interrupt n
+
+Example 1: In this example, the system uses only the first global timer
+	   interrupt generated by MCT and the remaining three global timer
+	   interrupts are unused. Two local timer interrupts have been
+	   specified.
+
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+			     <0 42 0>, <0 48 0>;
+	};
+
+Example 2: In this example, the MCT global and local timer interrupts are
+	   connected to two seperate interrupt controllers. Hence, an
+	   interrupt-map is created to map the interrupts to the respective
+	   interrupt controllers.
+
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};

Documentation/devicetree/bindings/usb/exynos-usb.txt

@@ -0,0 +1,50 @@
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+   EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+
+Optional properties:
+ - samsung,vbus-gpio:  if present, specifies the GPIO that
+   needs to be pulled up for the bus to be powered.
+
+Example:
+
+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
+	};
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+   OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+
+Example:
+	usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
+	};

Documentation/devicetree/bindings/video/samsung-fimd.txt

@@ -0,0 +1,65 @@
+Device-Tree bindings for Samsung SoC display controller (FIMD)
+
+FIMD (Fully Interactive Mobile Display) is the Display Controller for the
+Samsung series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be one of the following
+		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
+		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
+		"samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */
+		"samsung,s5pc100-fimd"; /* for S5PC100 SoC  */
+		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
+		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+
+- reg: physical base address and length of the FIMD registers set.
+
+- interrupt-parent: should be the phandle of the fimd controller's
+		parent interrupt controller.
+
+- interrupts: should contain a list of all FIMD IP block interrupts in the
+		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+		 format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+	"lcd_sys", in the same order as they were listed in the interrupts
+        property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+         clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+               property. Must contain "sclk_fimd" and "fimd".
+
+Optional Properties:
+- samsung,power-domain: a phandle to FIMD power domain node.
+
+Example:
+
+SoC specific DT entry:
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos4210-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x11c00000 0x20000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <11 0>, <11 1>, <11 2>;
+		clocks = <&clock 140>, <&clock 283>;
+		clock-names = "sclk_fimd", "fimd";
+		samsung,power-domain = <&pd_lcd0>;
+		status = "disabled";
+	};
+
+Board specific DT entry:
+
+	fimd@11c00000 {
+		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};

arch/arm/Kconfig

@@ -769,8 +769,10 @@ config ARCH_SA1100
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
 	select ARCH_HAS_CPUFREQ
-	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -787,10 +789,11 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select ARM_VIC
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select CPU_V6
+	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -824,9 +827,11 @@ config ARCH_S5P64X0
 
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
-	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -859,6 +864,7 @@ config ARCH_EXYNOS
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
@@ -1656,7 +1662,7 @@ config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP
 	default y
-	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
+	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !CLKSRC_EXYNOS_MCT)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system

arch/arm/boot/dts/Makefile

@@ -42,7 +42,11 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
+	exynos4412-odroidx.dtb \
 	exynos4412-smdk4412.dtb \
+	exynos4412-origen.dtb \
+	exynos5250-arndale.dtb \
+	exynos5440-sd5v1.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5440-ssdk5440.dtb

arch/arm/boot/dts/cros5250-common.dtsi

@@ -19,31 +19,168 @@
 	chosen {
 	};
 
+	pinctrl@11400000 {
+		/*
+		 * Disabled pullups since external part has its own pullups and
+		 * double-pulling gets us out of spec in some cases.
+		 */
+		i2c2_bus: i2c2-bus {
+			samsung,pin-pud = <0>;
+		};
+	};
+
 	i2c@12C60000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
-		gpios = <&gpb3 0 2 3 0>,
-			<&gpb3 1 2 3 0>;
+
+		max77686@09 {
+			compatible = "maxim,max77686";
+			reg = <0x09>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "P1.0V_LDO_OUT1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "P1.8V_LDO_OUT2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "P1.8V_LDO_OUT3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "P1.1V_LDO_OUT7";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "P1.0V_LDO_OUT8";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "P1.8V_LDO_OUT10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "P3.0V_LDO_OUT12";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "P1.8V_LDO_OUT14";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "P1.0V_LDO_OUT15";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "P1.8V_LDO_OUT16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "P1.8V_BUCK_OUT5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "P1.35V_BUCK_OUT6";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "P2.0V_BUCK_OUT7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "P2.85V_BUCK_OUT8";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+			};
+		};
 	};
 
 	i2c@12C70000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
-		gpios = <&gpb3 2 2 3 0>,
-			<&gpb3 3 2 3 0>;
 	};
 
 	i2c@12C80000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
 
-		/*
-		 * Disabled pullups since external part has its own pullups and
-		 * double-pulling gets us out of spec in some cases.
-		 */
-		gpios = <&gpa0 6 3 0 0>,
-			<&gpa0 7 3 0 0>;
-
 		hdmiddc@50 {
 			compatible = "samsung,exynos5-hdmiddc";
 			reg = <0x50>;
@@ -53,8 +190,6 @@
 	i2c@12C90000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
-		gpios = <&gpa1 2 3 3 0>,
-			<&gpa1 3 3 3 0>;
 	};
 
 	i2c@12CA0000 {
@@ -64,8 +199,6 @@
 	i2c@12CB0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
-		gpios = <&gpa2 2 3 3 0>,
-			<&gpa2 3 3 3 0>;
 	};
 
 	i2c@12CC0000 {
@@ -75,8 +208,6 @@
 	i2c@12CD0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
-		gpios = <&gpb2 2 3 3 0>,
-			<&gpb2 3 3 3 0>;
 	};
 
 	i2c@12CE0000 {
@@ -98,15 +229,12 @@
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <8>;
-			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
 		};
 	};
 
@@ -122,15 +250,13 @@
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <4>;
-			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
-			wp-gpios = <&gpc2 1 0 0 3>;
-			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
-				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
-				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+			wp-gpios = <&gpc2 1 0>;
 		};
 	};
 
@@ -143,11 +269,11 @@
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		/* See board-specific dts files for pin setup */
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <4>;
-			/* See board-specific dts files for GPIOs */
 		};
 	};
 
@@ -156,9 +282,6 @@
 	};
 
 	spi_1: spi@12d30000 {
-		gpios = <&gpa2 4 2 3 0>,
-			<&gpa2 6 2 3 0>,
-			<&gpa2 7 2 3 0>;
 		samsung,spi-src-clk = <0>;
 		num-cs = <1>;
 	};
@@ -168,7 +291,7 @@
 	};
 
 	hdmi {
-		hpd-gpio = <&gpx3 7 0xf 1 3>;
+		hpd-gpio = <&gpx3 7 0>;
 	};
 
 	gpio-keys {
@@ -176,7 +299,7 @@
 
 		power {
 			label = "Power";
-			gpios = <&gpx1 3 0 0x10000 0>;
+			gpios = <&gpx1 3 1>;
 			linux,code = <116>; /* KEY_POWER */
 			gpio-key,wakeup;
 		};

arch/arm/boot/dts/exynos4.dtsi

@@ -82,10 +82,17 @@
 		reg = <0x10440000 0x1000>;
 	};
 
+	sys_reg: sysreg {
+		compatible = "samsung,exynos4-sysreg", "syscon";
+		reg = <0x10010000 0x400>;
+	};
+
 	watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 43 0>;
+		clocks = <&clock 345>;
+		clock-names = "watchdog";
 		status = "disabled";
 	};
 
@@ -93,6 +100,8 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <0 44 0>, <0 45 0>;
+		clocks = <&clock 346>;
+		clock-names = "rtc";
 		status = "disabled";
 	};
 
@@ -100,6 +109,8 @@
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <0 109 0>;
+		clocks = <&clock 347>;
+		clock-names = "keypad";
 		status = "disabled";
 	};
 
@@ -107,6 +118,8 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
 		interrupts = <0 73 0>;
+		clocks = <&clock 297>, <&clock 145>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
@@ -114,6 +127,8 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
 		interrupts = <0 74 0>;
+		clocks = <&clock 298>, <&clock 146>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
@@ -121,6 +136,8 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
 		interrupts = <0 75 0>;
+		clocks = <&clock 299>, <&clock 147>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
@@ -128,6 +145,16 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
 		interrupts = <0 76 0>;
+		clocks = <&clock 300>, <&clock 148>;
+		clock-names = "hsmmc", "mmc_busclk.2";
+		status = "disabled";
+	};
+
+	mfc: codec@13400000 {
+		compatible = "samsung,mfc-v5";
+		reg = <0x13400000 0x10000>;
+		interrupts = <0 94 0>;
+		samsung,power-domain = <&pd_mfc>;
 		status = "disabled";
 	};
 
@@ -135,6 +162,8 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
 		interrupts = <0 52 0>;
+		clocks = <&clock 312>, <&clock 151>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -142,6 +171,8 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
 		interrupts = <0 53 0>;
+		clocks = <&clock 313>, <&clock 152>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -149,6 +180,8 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -156,6 +189,8 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
 		interrupts = <0 55 0>;
+		clocks = <&clock 315>, <&clock 154>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -165,6 +200,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
 		interrupts = <0 58 0>;
+		clocks = <&clock 317>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
 		status = "disabled";
 	};
 
@@ -174,6 +213,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
 		interrupts = <0 59 0>;
+		clocks = <&clock 318>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
 		status = "disabled";
 	};
 
@@ -183,6 +226,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
 		interrupts = <0 60 0>;
+		clocks = <&clock 319>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -192,6 +237,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
 		interrupts = <0 61 0>;
+		clocks = <&clock 320>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -201,6 +248,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
 		interrupts = <0 62 0>;
+		clocks = <&clock 321>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -210,6 +259,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
 		interrupts = <0 63 0>;
+		clocks = <&clock 322>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -219,6 +270,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
 		interrupts = <0 64 0>;
+		clocks = <&clock 323>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -228,6 +281,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
 		interrupts = <0 65 0>;
+		clocks = <&clock 324>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -239,6 +294,10 @@
 		rx-dma-channel = <&pdma0 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 327>, <&clock 159>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_bus>;
 		status = "disabled";
 	};
 
@@ -250,6 +309,10 @@
 		rx-dma-channel = <&pdma1 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 328>, <&clock 160>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
 		status = "disabled";
 	};
 
@@ -261,6 +324,10 @@
 		rx-dma-channel = <&pdma0 8>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 329>, <&clock 161>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_bus>;
 		status = "disabled";
 	};
 
@@ -275,6 +342,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
+			clocks = <&clock 292>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -284,6 +353,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
+			clocks = <&clock 293>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -293,9 +364,23 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
+			clocks = <&clock 279>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
 		};
 	};
+
+	fimd: fimd@11c00000 {
+		compatible = "samsung,exynos4210-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x11c00000 0x20000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <11 0>, <11 1>, <11 2>;
+		clocks = <&clock 140>, <&clock 283>;
+		clock-names = "sclk_fimd", "fimd";
+		samsung,power-domain = <&pd_lcd0>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos4210-origen.dts

@@ -57,6 +57,16 @@
 		status = "okay";
 	};
 
+	g2d@12800000 {
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -121,4 +131,16 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210-smdkv310.dts

@@ -30,16 +30,19 @@
 	};
 
 	sdhci@12530000 {
-		samsung,sdhci-bus-width = <4>;
-		linux,mmc_cap_4_bit_data;
-		samsung,sdhci-cd-internal;
-		gpio-cd = <&gpk2 2 2 3 3>;
-		gpios = <&gpk2 0 2 0 3>,
-			<&gpk2 1 2 0 3>,
-			<&gpk2 3 2 3 3>,
-			<&gpk2 4 2 3 3>,
-			<&gpk2 5 2 3 3>,
-			<&gpk2 6 2 3 3>;
+		bus-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		status = "okay";
+	};
+
+	g2d@12800000 {
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
 		status = "okay";
 	};
 
@@ -59,25 +62,32 @@
 		status = "okay";
 	};
 
+	pinctrl@11000000 {
+		keypad_rows: keypad-rows {
+			samsung,pins = "gpx2-0", "gpx2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_cols: keypad-cols {
+			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
 	keypad@100A0000 {
 		samsung,keypad-num-rows = <2>;
 		samsung,keypad-num-columns = <8>;
 		linux,keypad-no-autorepeat;
 		linux,keypad-wakeup;
+		pinctrl-names = "default";
+		pinctrl-0 = <&keypad_rows &keypad_cols>;
 		status = "okay";
 
-		row-gpios = <&gpx2 0 3 3 0>,
-			    <&gpx2 1 3 3 0>;
-
-		col-gpios = <&gpx1 0 3 0 0>,
-			    <&gpx1 1 3 0 0>,
-			    <&gpx1 2 3 0 0>,
-			    <&gpx1 3 3 0 0>,
-			    <&gpx1 4 3 0 0>,
-			    <&gpx1 5 3 0 0>,
-			    <&gpx1 6 3 0 0>,
-			    <&gpx1 7 3 0 0>;
-
 		key_1 {
 			keypad,row = <0>;
 			keypad,column = <3>;
@@ -143,9 +153,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		gpios = <&gpd1 0 2 3 0>,
-			<&gpd1 1 2 3 0>;
+		samsung,i2c-max-bus-freq = <100000>;
 		status = "okay";
 
 		eeprom@50 {
@@ -160,9 +168,6 @@
 	};
 
 	spi_2: spi@13940000 {
-		gpios = <&gpc1 1 5 3 0>,
-			<&gpc1 3 5 3 0>,
-			<&gpc1 4 5 3 0>;
 		status = "okay";
 
 		w25x80@0 {
@@ -173,7 +178,7 @@
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpc1 2 1 0 3>;
+				cs-gpio = <&gpc1 2 0>;
 				samsung,spi-feedback-delay = <0>;
 			};
 
@@ -189,4 +194,16 @@
 			};
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <12000000>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210-trats.dts

@@ -289,4 +289,16 @@
 			};
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210.dtsi

@@ -47,6 +47,36 @@
 			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 	};
 
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &gic 0 69 0>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 0 42 0>,
+					<0x5 0 &gic 0 48 0>;
+		};
+	};
+
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
@@ -76,4 +106,11 @@
 		reg = <0x100C0000 0x100>;
 		interrupts = <2 4>;
 	};
+
+	g2d@12800000 {
+		compatible = "samsung,s5pv210-g2d";
+		reg = <0x12800000 0x1000>;
+		interrupts = <0 89 0>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos4212.dtsi

@@ -25,4 +25,26 @@
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x8000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4412-odroidx.dts

@@ -0,0 +1,109 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X board based on Exynos4412";
+	compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led2 {
+			label = "led2:mmc0";
+			gpios = <&gpc1 2 1>;
+			default-state = "on";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	mshc@12550000 {
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	regulator_p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpa1 1 1>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};

arch/arm/boot/dts/exynos4412-origen.dts

@@ -0,0 +1,451 @@
+/*
+ * Insignal's Exynos4412 based Origen board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4412";
+	compatible = "insignal,origen4412", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs ="console=ttySAC2,115200";
+	};
+
+	mmc_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 0>;
+		enable-active-high;
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		vmmc-supply = <&mmc_reg>;
+		status = "okay";
+	};
+
+	mshc@12550000 {
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
+	fimd@11c00000 {
+		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <50000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <64>;
+			hback-porch = <16>;
+			hsync-len = <48>;
+			vback-porch = <64>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+		};
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		s5m8767_pmic@66 {
+			compatible = "samsung,s5m8767-pmic";
+			reg = <0x66>;
+
+			s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+			s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
+							 <&gpx2 4 0>,
+							 <&gpx2 5 0>;
+
+			s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
+							<&gpm3 6 0>,
+							<&gpm3 7 0>;
+
+			s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+							 <1100000>, <1100000>,
+							 <1100000>, <1100000>,
+							 <1100000>, <1100000>;
+
+			s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ALIVE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDDQ_M12";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VDDIOAP_18";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDDQ_PRE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VDD18_2M";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VDD10_MPLL";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD10_XPLL";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VDD10_MIPI";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VDD33_LCD";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VDD18_MIPI";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD18_ABB1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "VDD33_UOTG";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VDDIOPERI_18";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VDD18_ABB02";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "VDD10_USH";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VDD18_HSIC";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VDDIOAP_MMC012_28";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo18_reg: LDO18 {
+					regulator-name = "VDDIOPERI_28";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "DVDD25";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "VDD28_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "VDD28_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo22_reg: LDO22 {
+					regulator-name = "VDDA28_2M";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo23_reg: LDO23 {
+					regulator-name = "VDD28_TF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "VDD33_A31";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo25_reg: LDO25 {
+					regulator-name = "VDD18_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "VDD18_A31";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo27_reg: LDO27 {
+					regulator-name = "GPS_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo28_reg: LDO28 {
+					regulator-name = "DVDD12";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt	= <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <925000>;
+					regulator-max-microvolt	= <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "vdd_m12";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "vdd12_5m";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "vddf28_emmc";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};

arch/arm/boot/dts/exynos4412-smdk4412.dts

@@ -27,6 +27,27 @@
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 	};
 
+	g2d@10800000 {
+		status = "okay";
+	};
+
+	g2d@10800000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -42,4 +63,16 @@
 	serial@13830000 {
 		status = "okay";
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4412.dtsi

@@ -25,4 +25,30 @@
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x4000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>, <6 0>, <7 0>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>,
+					<0x6 0 &gic 1 12 0>,
+					<0x7 0 &gic 1 12 0>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4x12.dtsi

@@ -36,6 +36,12 @@
 			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
 	};
 
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4412-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;
@@ -66,4 +72,11 @@
 		reg = <0x106E0000 0x1000>;
 		interrupts = <0 72 0>;
 	};
+
+	g2d@10800000 {
+		compatible = "samsung,exynos4212-g2d";
+		reg = <0x10800000 0x1000>;
+		interrupts = <0 89 0>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -0,0 +1,452 @@
+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+	model = "Insignal Arndale evaluation board based on EXYNOS5250";
+	compatible = "insignal,arndale", "samsung,exynos5250";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	codec@11000000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		samsung,i2c-slave-addr = <0x66>;
+
+		s5m8767_pmic@66 {
+			compatible = "samsung,s5m8767-pmic";
+			reg = <0x66>;
+
+			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+			s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+			s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+			s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
+							<&gpd1 1 0>,
+							<&gpd1 2 0>;
+			s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
+							<&gpx2 4 0>,
+							<&gpx2 5 0>;
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ALIVE_1.0V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDD_28IO_DP_1.35V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VDD_COMMON1_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDD_IOPERI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					op_mode = <1>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VDD_EXT_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VDD_MPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD_XPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VDD_COMMON2_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VDD_33ON_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					op_mode = <1>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VDD_COMMON3_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD_ABB2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "VDD_USB_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VDDQ_C2C_W_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VDD18_ABB0_3_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "VDD10_COMMON4_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VDD18_HSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VDDQ_MMC2_3_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo18_reg: LDO18 {
+					regulator-name = "VDD_33ON_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					op_mode = <1>;
+				};
+
+				ldo22_reg: LDO22 {
+					regulator-name = "EXT_33_OFF";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					op_mode = <1>;
+				};
+
+				ldo23_reg: LDO23 {
+					regulator-name = "EXT_28_OFF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					op_mode = <1>;
+				};
+
+				ldo25_reg: LDO25 {
+					regulator-name = "PVDD_LDO25";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					op_mode = <1>;
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "EXT_18_OFF";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					op_mode = <1>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <925000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "VDD_MEM_1.35V";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1355000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "VDD_33_OFF_EXT1";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <3000000>;
+					op_mode = <1>;
+				};
+			};
+		};
+	};
+
+	i2c@12C70000 {
+		status = "disabled";
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
+
+	i2c@121D0000 {
+		status = "disabled";
+	};
+
+	dwmmc_0: dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		vmmc-supply = <&mmc_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		vmmc-supply = <&mmc_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			disable-wp;
+		};
+	};
+
+	dwmmc_3: dwmmc3@12230000 {
+		status = "disabled";
+	};
+
+	spi_0: spi@12d20000 {
+		status = "disabled";
+	};
+
+	spi_1: spi@12d30000 {
+		status = "disabled";
+	};
+
+	spi_2: spi@12d40000 {
+		status = "disabled";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		menu {
+			label = "SW-TACT2";
+			gpios = <&gpx1 4 1>;
+			linux,code = <139>;
+			gpio-key,wakeup;
+		};
+
+		home {
+			label = "SW-TACT3";
+			gpios = <&gpx1 5 1>;
+			linux,code = <102>;
+			gpio-key,wakeup;
+		};
+
+		up {
+			label = "SW-TACT4";
+			gpios = <&gpx1 6 1>;
+			linux,code = <103>;
+			gpio-key,wakeup;
+		};
+
+		down {
+			label = "SW-TACT5";
+			gpios = <&gpx1 7 1>;
+			linux,code = <108>;
+			gpio-key,wakeup;
+		};
+
+		back {
+			label = "SW-TACT6";
+			gpios = <&gpx2 0 1>;
+			linux,code = <158>;
+			gpio-key,wakeup;
+		};
+
+		wakeup {
+			label = "SW-TACT7";
+			gpios = <&gpx2 1 1>;
+			linux,code = <143>;
+			gpio-key,wakeup;
+		};
+	};
+
+	hdmi {
+		hpd-gpio = <&gpx3 7 2>;
+		vdd_osc-supply = <&ldo10_reg>;
+		vdd_pll-supply = <&ldo8_reg>;
+		vdd-supply = <&ldo8_reg>;
+	};
+
+	mmc_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_33ON_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 1>;
+		enable-active-high;
+	};
+
+	reg_hdmi_en: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-en";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};

arch/arm/boot/dts/exynos5250-pinctrl.dtsi

@@ -0,0 +1,783 @@
+/*
+ * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb3: gpb3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc2: gpc2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc3: gpc3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpc4: gpc4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+				     <26 0>, <26 1>, <27 0>, <27 1>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+				     <30 0>, <30 1>, <31 0>, <31 1>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		i2c2_hs_bus: i2c2-hs-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		i2c3_hs_bus: i2c3-hs-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpa2-0", "gpa2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpa2-2", "gpa2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		ac97_bus: ac97-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+					"gpb1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+					"gpb1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpb1-0", "gpb1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpb1-3", "gpb1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpb2-2", "gpb2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpb3-0", "gpb3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpb3-2", "gpb3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_hs_bus: i2c0-hs-bus {
+			samsung,pins = "gpb3-0", "gpb3-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		i2c1_hs_bus: i2c1-hs-bus {
+			samsung,pins = "gpb3-2", "gpb3-3";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpc0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpc0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpc0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpc0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpc2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpc2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpc2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpc2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpc3-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpc3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpc3-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpc3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus8: sd2-bus-width8 {
+			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_clk: sd3-clk {
+			samsung,pins = "gpc4-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pins = "gpc4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cd: sd3-cd {
+			samsung,pins = "gpc4-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus1: sd3-bus-width1 {
+			samsung,pins = "gpc4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpd0-0", "gpd0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpd0-2", "gpd0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@13400000 {
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg0: gpg0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg1: gpg1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg2: gpg2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph0: gph0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph1: gph1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cam_gpio_a: cam-gpio-a {
+			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				       "gpe1-0", "gpe1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_gpio_b: cam-gpio-b {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+
+		cam_i2c2_bus: cam-i2c2-bus {
+			samsung,pins = "gpe0-6", "gpe1-0";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		cam_spi1_bus: cam-spi1-bus {
+			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+
+		cam_i2c1_bus: cam-i2c1-bus {
+			samsung,pins = "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		cam_i2c0_bus: cam-i2c0-bus {
+			samsung,pins = "gpf0-0", "gpf0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samaung,pin-drv = <0>;
+		};
+
+		cam_spi0_bus: cam-spi0-bus {
+			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+
+		cam_bayrgb_bus: cam-bayrgb-bus {
+			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+				       "gpg2-0", "gpg2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+
+		cam_port_a: cam-port-a {
+			samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+				       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@10d10000 {
+		gpv0: gpv0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv1: gpv1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv2: gpv2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv3: gpv3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv4: gpv4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		c2c_rxd: c2c-rxd {
+			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+				       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+				       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+
+		c2c_txd: c2c-txd {
+			samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+				       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+				       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03680000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -30,8 +30,6 @@
 	i2c@12C60000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
-		gpios = <&gpb3 0 2 3 0>,
-			<&gpb3 1 2 3 0>;
 
 		eeprom@50 {
 			compatible = "samsung,s524ad0xd1";
@@ -42,8 +40,6 @@
 	i2c@12C70000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
-		gpios = <&gpb3 2 2 3 0>,
-			<&gpb3 3 2 3 0>;
 
 		eeprom@51 {
 			compatible = "samsung,s524ad0xd1";
@@ -74,8 +70,6 @@
 	i2c@12C80000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
-		gpios = <&gpa0 6 3 3 0>,
-			<&gpa0 7 3 3 0>;
 
 		hdmiddc@50 {
 			compatible = "samsung,exynos5-hdmiddc";
@@ -122,15 +116,12 @@
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <8>;
-			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
 		};
 	};
 
@@ -146,17 +137,13 @@
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <4>;
-			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
 			disable-wp;
-			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
-				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
-				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
-				<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
-				<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
 		};
 	};
 
@@ -169,10 +156,6 @@
 	};
 
 	spi_1: spi@12d30000 {
-		gpios = <&gpa2 4 2 3 0>,
-			<&gpa2 6 2 3 0>,
-			<&gpa2 7 2 3 0>;
-
 		w25q80bw@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -181,7 +164,7 @@
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpa2 5 1 0 3>;
+				cs-gpio = <&gpa2 5 0>;
 				samsung,spi-feedback-delay = <0>;
 			};
 
@@ -203,7 +186,7 @@
 	};
 
 	hdmi {
-		hpd-gpio = <&gpx3 7 0xf 1 3>;
+		hpd-gpio = <&gpx3 7 0>;
 	};
 
 	codec@11000000 {
@@ -212,9 +195,7 @@
 	};
 
 	i2s0: i2s@03830000 {
-		gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
-			<&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
-			<&gpz 6 2 0 0>;
+		status = "okay";
 	};
 
 	i2s1: i2s@12D60000 {
@@ -231,4 +212,40 @@
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&wm8994>;
 	};
+
+	usb@12110000 {
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+	};
+
+	dp-controller {
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+	};
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing@0 {
+			/* 1280x800 */
+			clock-frequency = <50000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <4>;
+			hback-porch = <4>;
+			hsync-len = <4>;
+			vback-porch = <4>;
+			vfront-porch = <4>;
+			vsync-len = <4>;
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos5250-snow.dts

@@ -16,12 +16,27 @@
 	model = "Google Snow";
 	compatible = "google,snow", "samsung,exynos5250";
 
+	pinctrl@11400000 {
+		sd3_clk: sd3-clk {
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pin-drv = <0>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
 		lid-switch {
 			label = "Lid";
-			gpios = <&gpx3 5 0 0x10000 0>;
+			gpios = <&gpx3 5 1>;
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
@@ -35,9 +50,19 @@
 	 */
 	dwmmc3@12230000 {
 		slot@0 {
-			gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>,
-				<&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>,
-				<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+		};
+	};
+
+	usb@12110000 {
+		samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
 		};
 	};
 };

arch/arm/boot/dts/exynos5250.dtsi

@@ -18,6 +18,7 @@
 */
 
 /include/ "skeleton.dtsi"
+/include/ "exynos5250-pinctrl.dtsi"
 
 / {
 	compatible = "samsung,exynos5250";
@@ -44,13 +45,45 @@
 		i2c6 = &i2c_6;
 		i2c7 = &i2c_7;
 		i2c8 = &i2c_8;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+	};
+
+	pd_gsc: gsc-power-domain@0x10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	pd_mfc: mfc-power-domain@0x10044040 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044040 0x20>;
+	};
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5250-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
 	};
 
 	gic:interrupt-controller@10481000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
+		reg = <0x10481000 0x1000>,
+		      <0x10482000 0x1000>,
+		      <0x10484000 0x2000>,
+		      <0x10486000 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
 	};
 
 	combiner:interrupt-controller@10440000 {
@@ -69,58 +102,129 @@
 			     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
 	};
 
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+		clocks = <&clock 1>, <&clock 335>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x1 0 &combiner 23 4>,
+					<0x2 0 &combiner 25 2>,
+					<0x3 0 &combiner 25 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 46 0>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_1: pinctrl@13400000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x13400000 0x1000>;
+		interrupts = <0 45 0>;
+	};
+
+	pinctrl_2: pinctrl@10d10000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x10d10000 0x1000>;
+		interrupts = <0 50 0>;
+	};
+
+	pinctrl_3: pinctrl@03680000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x0368000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
 	watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x101D0000 0x100>;
 		interrupts = <0 42 0>;
+		clocks = <&clock 336>;
+		clock-names = "watchdog";
 	};
 
 	codec@11000000 {
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
+		samsung,power-domain = <&pd_mfc>;
 	};
 
 	rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
 		interrupts = <0 43 0>, <0 44 0>;
+		clocks = <&clock 337>;
+		clock-names = "rtc";
 	};
 
 	tmu@10060000 {
 		compatible = "samsung,exynos5250-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
+		clocks = <&clock 338>;
+		clock-names = "tmu_apbif";
 	};
 
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
 		interrupts = <0 51 0>;
+		clocks = <&clock 289>, <&clock 146>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C10000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C10000 0x100>;
 		interrupts = <0 52 0>;
+		clocks = <&clock 290>, <&clock 147>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C20000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C20000 0x100>;
 		interrupts = <0 53 0>;
+		clocks = <&clock 291>, <&clock 148>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C30000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C30000 0x100>;
 		interrupts = <0 54 0>;
+		clocks = <&clock 292>, <&clock 149>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	sata@122F0000 {
 		compatible = "samsung,exynos5-sata-ahci";
 		reg = <0x122F0000 0x1ff>;
 		interrupts = <0 115 0>;
+		clocks = <&clock 277>, <&clock 143>;
+		clock-names = "sata", "sclk_sata";
 	};
 
 	sata-phy@12170000 {
@@ -134,6 +238,10 @@
 		interrupts = <0 56 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 294>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
 	};
 
 	i2c_1: i2c@12C70000 {
@@ -142,6 +250,10 @@
 		interrupts = <0 57 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 295>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
 	};
 
 	i2c_2: i2c@12C80000 {
@@ -150,6 +262,10 @@
 		interrupts = <0 58 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 296>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
 	};
 
 	i2c_3: i2c@12C90000 {
@@ -158,6 +274,10 @@
 		interrupts = <0 59 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 297>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
 	};
 
 	i2c_4: i2c@12CA0000 {
@@ -166,6 +286,10 @@
 		interrupts = <0 60 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 298>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_bus>;
 	};
 
 	i2c_5: i2c@12CB0000 {
@@ -174,6 +298,10 @@
 		interrupts = <0 61 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 299>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_bus>;
 	};
 
 	i2c_6: i2c@12CC0000 {
@@ -182,6 +310,10 @@
 		interrupts = <0 62 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 300>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_bus>;
 	};
 
 	i2c_7: i2c@12CD0000 {
@@ -190,6 +322,10 @@
 		interrupts = <0 63 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 301>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_bus>;
 	};
 
 	i2c_8: i2c@12CE0000 {
@@ -198,6 +334,8 @@
 		interrupts = <0 64 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 302>;
+		clock-names = "i2c";
 	};
 
 	i2c@121D0000 {
@@ -205,6 +343,8 @@
                 reg = <0x121D0000 0x100>;
                 #address-cells = <1>;
                 #size-cells = <0>;
+		clocks = <&clock 288>;
+		clock-names = "i2c";
 	};
 
 	spi_0: spi@12d20000 {
@@ -216,6 +356,10 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 304>, <&clock 154>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_bus>;
 	};
 
 	spi_1: spi@12d30000 {
@@ -227,6 +371,10 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 305>, <&clock 155>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
 	};
 
 	spi_2: spi@12d40000 {
@@ -238,6 +386,10 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 306>, <&clock 156>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_bus>;
 	};
 
 	dwmmc_0: dwmmc0@12200000 {
@@ -246,6 +398,8 @@
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 280>, <&clock 139>;
+		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_1: dwmmc1@12210000 {
@@ -254,6 +408,8 @@
 		interrupts = <0 76 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 281>, <&clock 140>;
+		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_2: dwmmc2@12220000 {
@@ -262,6 +418,8 @@
 		interrupts = <0 77 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 282>, <&clock 141>;
+		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_3: dwmmc3@12230000 {
@@ -270,6 +428,8 @@
 		interrupts = <0 78 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 283>, <&clock 142>;
+		clock-names = "biu", "ciu";
 	};
 
 	i2s0: i2s@03830000 {
@@ -283,6 +443,8 @@
 		samsung,supports-rstclr;
 		samsung,supports-secdai;
 		samsung,idma-addr = <0x03000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
 	};
 
 	i2s1: i2s@12D60000 {
@@ -291,6 +453,8 @@
 		dmas = <&pdma1 12
 			&pdma1 11>;
 		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
 	};
 
 	i2s2: i2s@12D70000 {
@@ -299,6 +463,26 @@
 		dmas = <&pdma0 12
 			&pdma0 11>;
 		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_bus>;
+	};
+
+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
+	};
+
+	usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
 	};
 
 	amba {
@@ -312,6 +496,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <0 34 0>;
+			clocks = <&clock 275>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -321,6 +507,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <0 35 0>;
+			clocks = <&clock 276>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -330,6 +518,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
+			clocks = <&clock 271>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
@@ -339,287 +529,58 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
+			clocks = <&clock 271>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
 		};
 	};
 
-	gpio-controllers {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		gpio-controller;
-		ranges;
-
-		gpa0: gpio-controller@11400000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpa1: gpio-controller@11400020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpa2: gpio-controller@11400040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb0: gpio-controller@11400060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb1: gpio-controller@11400080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb2: gpio-controller@114000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb3: gpio-controller@114000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc0: gpio-controller@114000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc1: gpio-controller@11400100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc2: gpio-controller@11400120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc3: gpio-controller@11400140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc4: gpio-controller@114002E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114002E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd0: gpio-controller@11400160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd1: gpio-controller@11400180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy0: gpio-controller@114001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy1: gpio-controller@114001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy2: gpio-controller@114001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy3: gpio-controller@11400200 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400200 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy4: gpio-controller@11400220 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400220 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy5: gpio-controller@11400240 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400240 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy6: gpio-controller@11400260 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400260 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx0: gpio-controller@11400C00 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400C00 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx1: gpio-controller@11400C20 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400C20 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx2: gpio-controller@11400C40 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400C40 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx3: gpio-controller@11400C60 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400C60 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe0: gpio-controller@13400000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe1: gpio-controller@13400020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf0: gpio-controller@13400040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf1: gpio-controller@13400060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpg0: gpio-controller@13400080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpg1: gpio-controller@134000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x134000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpg2: gpio-controller@134000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x134000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gph0: gpio-controller@134000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x134000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gph1: gpio-controller@13400100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv0: gpio-controller@10D10000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv1: gpio-controller@10D10020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv2: gpio-controller@10D10040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv3: gpio-controller@10D10060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv4: gpio-controller@10D10080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D100C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpz: gpio-controller@03860000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x03860000 0x20>;
-			#gpio-cells = <4>;
-		};
-	};
-
 	gsc_0:  gsc@0x13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 256>;
+		clock-names = "gscl";
 	};
 
 	gsc_1:  gsc@0x13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 257>;
+		clock-names = "gscl";
 	};
 
 	gsc_2:  gsc@0x13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 258>;
+		clock-names = "gscl";
 	};
 
 	gsc_3:  gsc@0x13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 259>;
+		clock-names = "gscl";
 	};
 
 	hdmi {
 		compatible = "samsung,exynos5-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
+		clocks = <&clock 333>, <&clock 136>, <&clock 137>,
+				<&clock 333>, <&clock 333>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				"sclk_hdmiphy", "hdmiphy";
 	};
 
 	mixer {
@@ -627,4 +588,28 @@
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
 	};
+
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x1000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dptx-phy {
+			reg = <0x10040720>;
+			samsung,enable-mask = <1>;
+		};
+	};
+
+	fimd {
+		compatible = "samsung,exynos5250-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x14400000 0x40000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <18 4>, <18 5>, <18 6>;
+		clocks = <&clock 133>, <&clock 339>;
+		clock-names = "sclk_fimd", "fimd";
+	};
 };

arch/arm/boot/dts/exynos5440-sd5v1.dts

@@ -0,0 +1,39 @@
+/*
+ * SAMSUNG SD5v1 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5440.dtsi"
+
+/ {
+	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
+	compatible = "samsung,sd5v1", "samsung,exynos5440";
+
+	chosen {
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
+	};
+
+	fixed-rate-clocks {
+		xtal {
+			compatible = "samsung,clock-xtal";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	gmac: ethernet@00230000 {
+		fixed_phy;
+		phy_addr = <1>;
+	};
+
+	spi {
+		status = "disabled";
+	};
+
+};

arch/arm/boot/dts/exynos5440-ssdk5440.dts

@@ -16,31 +16,18 @@
 	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
 	compatible = "samsung,ssdk5440", "samsung,exynos5440";
 
-	memory {
-		reg = <0x80000000 0x80000000>;
-	};
-
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
 	};
 
 	spi {
 		status = "disabled";
 	};
 
-	i2c@F0000 {
-		status = "disabled";
-	};
-
-	i2c@100000 {
-		status = "disabled";
-	};
-
-	watchdog {
-		status = "disabled";
-	};
-
-	rtc {
-		status = "disabled";
+	fixed-rate-clocks {
+		xtal {
+			compatible = "samsung,clock-xtal";
+			clock-frequency = <50000000>;
+		};
 	};
 };

arch/arm/boot/dts/exynos5440.dtsi

@@ -16,63 +16,89 @@
 
 	interrupt-parent = <&gic>;
 
+	clock: clock-controller@0x160000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic:interrupt-controller@2E0000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x2E1000 0x1000>, <0x2E2000 0x1000>;
+		reg =	<0x2E1000 0x1000>,
+			<0x2E2000 0x1000>,
+			<0x2E4000 0x2000>,
+			<0x2E6000 0x2000>;
+		interrupts = <1 9 0xf04>;
 	};
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 13 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <0>;
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <1>;
 		};
 		cpu@2 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <2>;
 		};
 		cpu@3 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <3>;
 		};
 	};
 
-	common {
-		compatible = "samsung,exynos5440";
+	arm-pmu {
+		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+		interrupts = <0 52 4>,
+			     <0 53 4>,
+			     <0 54 4>,
+			     <0 55 4>;
+	};
+
+	timer {
+		compatible = "arm,cortex-a15-timer",
+			     "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <50000000>;
+	};
 
+	cpufreq@160000 {
+		compatible = "samsung,exynos5440-cpufreq";
+		reg = <0x160000 0x1000>;
+		interrupts = <0 57 0>;
+		operating-points = <
+				/* KHz	  uV */
+				1200000 1025000
+				1000000 975000
+				800000  925000
+		>;
 	};
 
 	serial@B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
 		interrupts = <0 2 0>;
+		clocks = <&clock 21>, <&clock 21>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@C0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
 		interrupts = <0 3 0>;
+		clocks = <&clock 21>, <&clock 21>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	spi {
@@ -83,11 +109,15 @@
 		rx-dma-channel = <&pdma0 4>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>, <&clock 16>;
+		clock-names = "spi", "spi_busclk0";
 	};
 
 	pinctrl {
 		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
+		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
+			     <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		#gpio-cells = <2>;
@@ -110,25 +140,42 @@
 	};
 
 	i2c@F0000 {
-		compatible = "samsung,s3c2440-i2c";
+		compatible = "samsung,exynos5440-i2c";
 		reg = <0xF0000 0x1000>;
 		interrupts = <0 5 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>;
+		clock-names = "i2c";
 	};
 
 	i2c@100000 {
-		compatible = "samsung,s3c2440-i2c";
+		compatible = "samsung,exynos5440-i2c";
 		reg = <0x100000 0x1000>;
 		interrupts = <0 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>;
+		clock-names = "i2c";
 	};
 
 	watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
 		interrupts = <0 1 0>;
+		clocks = <&clock 21>;
+		clock-names = "watchdog";
+	};
+
+	gmac: ethernet@00230000 {
+		compatible = "snps,dwmac-3.70a";
+		reg = <0x00230000 0x8000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 31 4>;
+		interrupt-names = "macirq";
+		phy-mode = "sgmii";
+		clocks = <&clock 25>;
+		clock-names = "stmmaceth";
 	};
 
 	amba {
@@ -138,19 +185,23 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		pdma0: pdma@121A0000 {
+		pdma0: pdma@00121000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x120000 0x1000>;
-			interrupts = <0 34 0>;
+			reg = <0x121000 0x1000>;
+			interrupts = <0 46 0>;
+			clocks = <&clock 8>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121B0000 {
+		pdma1: pdma@00120000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121000 0x1000>;
-			interrupts = <0 35 0>;
+			reg = <0x120000 0x1000>;
+			interrupts = <0 47 0>;
+			clocks = <&clock 8>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -161,5 +212,7 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
 		interrupts = <0 17 0>, <0 16 0>;
+		clocks = <&clock 21>;
+		clock-names = "rtc";
 	};
 };

arch/arm/mach-exynos/Kconfig

@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select S5P_DEV_MFC
@@ -79,12 +80,6 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
-config EXYNOS4_MCT
-	bool
-	default y
-	help
-	  Use MCT (Multi Core Timer) as kernel timers
-
 config EXYNOS_DEV_DMA
 	bool
 	help
@@ -276,8 +271,8 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
 	select S5P_GPIO_INT
-	select S5P_HRT
 	select S5P_SETUP_MIPIPHY
+	select SAMSUNG_HRT
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -406,10 +401,12 @@ config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
 	depends on ARCH_EXYNOS4
 	select ARM_AMBA
+	select CLKSRC_OF
 	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
 	select PINCTRL_EXYNOS
+	select S5P_DEV_MFC
 	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.
@@ -422,6 +419,7 @@ config MACH_EXYNOS5_DT
 	default y
 	depends on ARCH_EXYNOS5
 	select ARM_AMBA
+	select CLKSRC_OF
 	select USE_OF
 	help
 	  Machine support for Samsung EXYNOS5 machine with device tree enabled.

arch/arm/mach-exynos/Makefile

@@ -13,10 +13,6 @@ obj-				:=
 # Core
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= clock-exynos4.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
-obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
-obj-$(CONFIG_SOC_EXYNOS5250)	+= clock-exynos5.o
 
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
@@ -26,8 +22,6 @@ obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
-obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
-
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
 # machine support

arch/arm/mach-exynos/clock-exynos4.c

@@ -1,1601 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS),
-	SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS),
-	SAVE_ITEM(EXYNOS4_CLKSRC_TOP0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_TOP1),
-	SAVE_ITEM(EXYNOS4_CLKSRC_CAM),
-	SAVE_ITEM(EXYNOS4_CLKSRC_TV),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MFC),
-	SAVE_ITEM(EXYNOS4_CLKSRC_G3D),
-	SAVE_ITEM(EXYNOS4_CLKSRC_LCD0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO),
-	SAVE_ITEM(EXYNOS4_CLKSRC_FSYS),
-	SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1),
-	SAVE_ITEM(EXYNOS4_CLKDIV_CAM),
-	SAVE_ITEM(EXYNOS4_CLKDIV_TV),
-	SAVE_ITEM(EXYNOS4_CLKDIV_MFC),
-	SAVE_ITEM(EXYNOS4_CLKDIV_G3D),
-	SAVE_ITEM(EXYNOS4_CLKDIV_LCD0),
-	SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO),
-	SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0),
-	SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1),
-	SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2),
-	SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5),
-	SAVE_ITEM(EXYNOS4_CLKDIV_TOP),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1),
-	SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO),
-	SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL),
-	SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC),
-	SAVE_ITEM(EXYNOS4_CLKSRC_DMC),
-	SAVE_ITEM(EXYNOS4_CLKDIV_DMC0),
-	SAVE_ITEM(EXYNOS4_CLKDIV_DMC1),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC),
-	SAVE_ITEM(EXYNOS4_CLKSRC_CPU),
-	SAVE_ITEM(EXYNOS4_CLKDIV_CPU),
-	SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4),
-	SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU),
-};
-#endif
-
-static struct clk exynos4_clk_sclk_hdmi27m = {
-	.name		= "sclk_hdmi27m",
-	.rate		= 27000000,
-};
-
-static struct clk exynos4_clk_sclk_hdmiphy = {
-	.name		= "sclk_hdmiphy",
-};
-
-static struct clk exynos4_clk_sclk_usbphy0 = {
-	.name		= "sclk_usbphy0",
-	.rate		= 27000000,
-};
-
-static struct clk exynos4_clk_sclk_usbphy1 = {
-	.name		= "sclk_usbphy1",
-};
-
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
-static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable);
-}
-
-static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable);
-}
-
-int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable);
-}
-
-static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable);
-}
-
-static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
-}
-
-int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
-}
-
-static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable);
-}
-
-int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable);
-}
-
-int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable);
-}
-
-static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
-}
-
-int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable);
-}
-
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos4_clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.sources = &clk_src_apll,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_apll = {
-	.clk	= {
-		.name		= "sclk_apll",
-		.parent		= &exynos4_clk_mout_apll.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.sources = &clk_src_epll,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 },
-};
-
-struct clksrc_clk exynos4_clk_mout_mpll = {
-	.clk	= {
-		.name		= "mout_mpll",
-	},
-	.sources = &clk_src_mpll,
-
-	/* reg_src will be added in each SoCs' clock */
-};
-
-static struct clk *exynos4_clkset_moutcore_list[] = {
-	[0] = &exynos4_clk_mout_apll.clk,
-	[1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_moutcore = {
-	.sources	= exynos4_clkset_moutcore_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_moutcore_list),
-};
-
-static struct clksrc_clk exynos4_clk_moutcore = {
-	.clk	= {
-		.name		= "moutcore",
-	},
-	.sources = &exynos4_clkset_moutcore,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_coreclk = {
-	.clk	= {
-		.name		= "core_clk",
-		.parent		= &exynos4_clk_moutcore.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_armclk = {
-	.clk	= {
-		.name		= "armclk",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem0 = {
-	.clk	= {
-		.name		= "aclk_corem0",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cores = {
-	.clk	= {
-		.name		= "aclk_cores",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem1 = {
-	.clk	= {
-		.name		= "aclk_corem1",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_periphclk = {
-	.clk	= {
-		.name		= "periphclk",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 },
-};
-
-/* Core list of CMU_CORE side */
-
-static struct clk *exynos4_clkset_corebus_list[] = {
-	[0] = &exynos4_clk_mout_mpll.clk,
-	[1] = &exynos4_clk_sclk_apll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_corebus = {
-	.sources	= exynos4_clkset_corebus_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_corebus_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_corebus = {
-	.clk	= {
-		.name		= "mout_corebus",
-	},
-	.sources = &exynos4_clkset_mout_corebus,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dmc = {
-	.clk	= {
-		.name		= "sclk_dmc",
-		.parent		= &exynos4_clk_mout_corebus.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cored = {
-	.clk	= {
-		.name		= "aclk_cored",
-		.parent		= &exynos4_clk_sclk_dmc.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corep = {
-	.clk	= {
-		.name		= "aclk_corep",
-		.parent		= &exynos4_clk_aclk_cored.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_acp = {
-	.clk	= {
-		.name		= "aclk_acp",
-		.parent		= &exynos4_clk_mout_corebus.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_pclk_acp = {
-	.clk	= {
-		.name		= "pclk_acp",
-		.parent		= &exynos4_clk_aclk_acp.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-struct clk *exynos4_clkset_aclk_top_list[] = {
-	[0] = &exynos4_clk_mout_mpll.clk,
-	[1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_aclk = {
-	.sources	= exynos4_clkset_aclk_top_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos4_clk_aclk_200 = {
-	.clk	= {
-		.name		= "aclk_200",
-	},
-	.sources = &exynos4_clkset_aclk,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_100 = {
-	.clk	= {
-		.name		= "aclk_100",
-	},
-	.sources = &exynos4_clkset_aclk,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_160 = {
-	.clk	= {
-		.name		= "aclk_160",
-	},
-	.sources = &exynos4_clkset_aclk,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 },
-};
-
-struct clksrc_clk exynos4_clk_aclk_133 = {
-	.clk	= {
-		.name		= "aclk_133",
-	},
-	.sources = &exynos4_clkset_aclk,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 },
-};
-
-static struct clk *exynos4_clkset_vpllsrc_list[] = {
-	[0] = &clk_fin_vpll,
-	[1] = &exynos4_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos4_clkset_vpllsrc = {
-	.sources	= exynos4_clkset_vpllsrc_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos4_clk_vpllsrc = {
-	.clk	= {
-		.name		= "vpll_src",
-		.enable		= exynos4_clksrc_mask_top_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos4_clkset_vpllsrc,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_vpll_list[] = {
-	[0] = &exynos4_clk_vpllsrc.clk,
-	[1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_vpll = {
-	.sources	= exynos4_clkset_sclk_vpll_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_vpll = {
-	.clk	= {
-		.name		= "sclk_vpll",
-	},
-	.sources = &exynos4_clkset_sclk_vpll,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 },
-};
-
-static struct clk exynos4_init_clocks_off[] = {
-	{
-		.name		= "timers",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1<<24),
-	}, {
-		.name		= "csis",
-		.devname	= "s5p-mipi-csis.0",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "csis",
-		.devname	= "s5p-mipi-csis.1",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "jpeg",
-		.id		= 0,
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "fimc",
-		.devname	= "exynos4-fimc.0",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "fimc",
-		.devname	= "exynos4-fimc.1",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "fimc",
-		.devname	= "exynos4-fimc.2",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "fimc",
-		.devname	= "exynos4-fimc.3",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "tsi",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.0",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.1",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.2",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.3",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "biu",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "onenand",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "nfcon",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "dac",
-		.devname	= "s5p-sdo",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "mixer",
-		.devname	= "s5p-mixer",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "vp",
-		.devname	= "s5p-mixer",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "hdmi",
-		.devname	= "exynos4-hdmi",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "hdmiphy",
-		.devname	= "exynos4-hdmi",
-		.enable		= exynos4_clk_hdmiphy_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "dacphy",
-		.devname	= "s5p-sdo",
-		.enable		= exynos4_clk_dac_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "adc",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "tmu_apbif",
-		.enable		= exynos4_clk_ip_perir_ctrl,
-		.ctrlbit	= (1 << 17),
-	}, {
-		.name		= "keypad",
-		.enable		= exynos4_clk_ip_perir_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "rtc",
-		.enable		= exynos4_clk_ip_perir_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "watchdog",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_perir_ctrl,
-		.ctrlbit	= (1 << 14),
-	}, {
-		.name		= "usbhost",
-		.enable		= exynos4_clk_ip_fsys_ctrl ,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "otg",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "spi",
-		.devname	= "exynos4210-spi.0",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "spi",
-		.devname	= "exynos4210-spi.1",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 17),
-	}, {
-		.name		= "spi",
-		.devname	= "exynos4210-spi.2",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.1",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 20),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.2",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.1",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 22),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.2",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 23),
-	}, {
-		.name		= "slimbus",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "spdif",
-		.devname	= "samsung-spdif",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 26),
-	}, {
-		.name		= "ac97",
-		.devname	= "samsung-ac97",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 27),
-	}, {
-		.name		= "mfc",
-		.devname	= "s5p-mfc",
-		.enable		= exynos4_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.0",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.2",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.3",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.4",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.5",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.6",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.7",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-hdmiphy-i2c",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 14),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.0",
-		.enable		= exynos4_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.1",
-		.enable		= exynos4_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.2",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.3",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.4",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.5",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.6",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.7",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.8",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.10",
-		.enable		= exynos4_clk_ip_lcd0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}
-};
-
-static struct clk exynos4_init_clocks_on[] = {
-	{
-		.name		= "uart",
-		.devname	= "s5pv210-uart.0",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.1",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.2",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.3",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.4",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.5",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 5),
-	}
-};
-
-static struct clk exynos4_clk_pdma0 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.0",
-	.enable		= exynos4_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 0),
-};
-
-static struct clk exynos4_clk_pdma1 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.1",
-	.enable		= exynos4_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
-};
-
-static struct clk exynos4_clk_mdma1 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.2",
-	.enable		= exynos4_clk_ip_image_ctrl,
-	.ctrlbit	= ((1 << 8) | (1 << 5) | (1 << 2)),
-};
-
-static struct clk exynos4_clk_fimd0 = {
-	.name		= "fimd",
-	.devname	= "exynos4-fb.0",
-	.enable		= exynos4_clk_ip_lcd0_ctrl,
-	.ctrlbit	= (1 << 0),
-};
-
-struct clk *exynos4_clkset_group_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = &clk_xusbxti,
-	[2] = &exynos4_clk_sclk_hdmi27m,
-	[3] = &exynos4_clk_sclk_usbphy0,
-	[4] = &exynos4_clk_sclk_usbphy1,
-	[5] = &exynos4_clk_sclk_hdmiphy,
-	[6] = &exynos4_clk_mout_mpll.clk,
-	[7] = &exynos4_clk_mout_epll.clk,
-	[8] = &exynos4_clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_group = {
-	.sources	= exynos4_clkset_group_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_group_list),
-};
-
-static struct clk *exynos4_clkset_mout_g2d0_list[] = {
-	[0] = &exynos4_clk_mout_mpll.clk,
-	[1] = &exynos4_clk_sclk_apll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_g2d0 = {
-	.sources	= exynos4_clkset_mout_g2d0_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_g2d0_list),
-};
-
-static struct clk *exynos4_clkset_mout_g2d1_list[] = {
-	[0] = &exynos4_clk_mout_epll.clk,
-	[1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_g2d1 = {
-	.sources	= exynos4_clkset_mout_g2d1_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_g2d1_list),
-};
-
-static struct clk *exynos4_clkset_mout_mfc0_list[] = {
-	[0] = &exynos4_clk_mout_mpll.clk,
-	[1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc0 = {
-	.sources	= exynos4_clkset_mout_mfc0_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_mfc0_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc0 = {
-	.clk	= {
-		.name		= "mout_mfc0",
-	},
-	.sources = &exynos4_clkset_mout_mfc0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc1_list[] = {
-	[0] = &exynos4_clk_mout_epll.clk,
-	[1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc1 = {
-	.sources	= exynos4_clkset_mout_mfc1_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_mfc1_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc1 = {
-	.clk	= {
-		.name		= "mout_mfc1",
-	},
-	.sources = &exynos4_clkset_mout_mfc1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc_list[] = {
-	[0] = &exynos4_clk_mout_mfc0.clk,
-	[1] = &exynos4_clk_mout_mfc1.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc = {
-	.sources	= exynos4_clkset_mout_mfc_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_mfc_list),
-};
-
-static struct clk *exynos4_clkset_sclk_dac_list[] = {
-	[0] = &exynos4_clk_sclk_vpll.clk,
-	[1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_dac = {
-	.sources	= exynos4_clkset_sclk_dac_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_sclk_dac_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dac = {
-	.clk		= {
-		.name		= "sclk_dac",
-		.enable		= exynos4_clksrc_mask_tv_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.sources = &exynos4_clkset_sclk_dac,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_pixel = {
-	.clk		= {
-		.name		= "sclk_pixel",
-		.parent		= &exynos4_clk_sclk_vpll.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 },
-};
-
-static struct clk *exynos4_clkset_sclk_hdmi_list[] = {
-	[0] = &exynos4_clk_sclk_pixel.clk,
-	[1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_hdmi = {
-	.sources	= exynos4_clkset_sclk_hdmi_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_hdmi = {
-	.clk		= {
-		.name		= "sclk_hdmi",
-		.enable		= exynos4_clksrc_mask_tv_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos4_clkset_sclk_hdmi,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_mixer_list[] = {
-	[0] = &exynos4_clk_sclk_dac.clk,
-	[1] = &exynos4_clk_sclk_hdmi.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_mixer = {
-	.sources	= exynos4_clkset_sclk_mixer_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_sclk_mixer_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mixer = {
-	.clk	= {
-		.name		= "sclk_mixer",
-		.enable		= exynos4_clksrc_mask_tv_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.sources = &exynos4_clkset_sclk_mixer,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk *exynos4_sclk_tv[] = {
-	&exynos4_clk_sclk_dac,
-	&exynos4_clk_sclk_pixel,
-	&exynos4_clk_sclk_hdmi,
-	&exynos4_clk_sclk_mixer,
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc0 = {
-	.clk	= {
-		.name		= "dout_mmc0",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc1 = {
-	.clk	= {
-		.name		= "dout_mmc1",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc2 = {
-	.clk	= {
-		.name		= "dout_mmc2",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc3 = {
-	.clk	= {
-		.name		= "dout_mmc3",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc4 = {
-	.clk		= {
-		.name		= "dout_mmc4",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_pwm",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_csis",
-			.devname	= "s5p-mipi-csis.0",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_csis",
-			.devname	= "s5p-mipi-csis.1",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 28),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_cam0",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_cam1",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 20),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "exynos4-fimc.0",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "exynos4-fimc.1",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 4),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "exynos4-fimc.2",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 8),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "exynos4-fimc.3",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 12),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.0",
-			.enable		= exynos4_clksrc_mask_lcd0_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_mfc",
-			.devname	= "s5p-mfc",
-		},
-		.sources = &exynos4_clkset_mout_mfc,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "ciu",
-			.parent		= &exynos4_clk_dout_mmc4.clk,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 },
-	}
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart0 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.0",
-		.enable		= exynos4_clksrc_mask_peril0_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.1",
-		.enable		= exynos4_clksrc_mask_peril0_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart2 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.2",
-		.enable		= exynos4_clksrc_mask_peril0_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart3 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.3",
-		.enable		= exynos4_clksrc_mask_peril0_ctrl,
-		.ctrlbit	= (1 << 12),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.0",
-		.parent		= &exynos4_clk_dout_mmc0.clk,
-		.enable		= exynos4_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.1",
-		.parent		= &exynos4_clk_dout_mmc1.clk,
-		.enable		= exynos4_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.2",
-		.parent		= &exynos4_clk_dout_mmc2.clk,
-		.enable		= exynos4_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.3",
-		.parent		= &exynos4_clk_dout_mmc3.clk,
-		.enable		= exynos4_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 12),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi0 = {
-	.clk	= {
-		.name		= "mdout_spi",
-		.devname	= "exynos4210-spi.0",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi1 = {
-	.clk	= {
-		.name		= "mdout_spi",
-		.devname	= "exynos4210-spi.1",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi2 = {
-	.clk	= {
-		.name		= "mdout_spi",
-		.devname	= "exynos4210-spi.2",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "exynos4210-spi.0",
-		.parent		= &exynos4_clk_mdout_spi0.clk,
-		.enable		= exynos4_clksrc_mask_peril1_ctrl,
-		.ctrlbit	= (1 << 16),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "exynos4210-spi.1",
-		.parent		= &exynos4_clk_mdout_spi1.clk,
-		.enable		= exynos4_clksrc_mask_peril1_ctrl,
-		.ctrlbit	= (1 << 20),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi2 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "exynos4210-spi.2",
-		.parent		= &exynos4_clk_mdout_spi2.clk,
-		.enable		= exynos4_clksrc_mask_peril1_ctrl,
-		.ctrlbit	= (1 << 24),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos4_sysclks[] = {
-	&exynos4_clk_mout_apll,
-	&exynos4_clk_sclk_apll,
-	&exynos4_clk_mout_epll,
-	&exynos4_clk_mout_mpll,
-	&exynos4_clk_moutcore,
-	&exynos4_clk_coreclk,
-	&exynos4_clk_armclk,
-	&exynos4_clk_aclk_corem0,
-	&exynos4_clk_aclk_cores,
-	&exynos4_clk_aclk_corem1,
-	&exynos4_clk_periphclk,
-	&exynos4_clk_mout_corebus,
-	&exynos4_clk_sclk_dmc,
-	&exynos4_clk_aclk_cored,
-	&exynos4_clk_aclk_corep,
-	&exynos4_clk_aclk_acp,
-	&exynos4_clk_pclk_acp,
-	&exynos4_clk_vpllsrc,
-	&exynos4_clk_sclk_vpll,
-	&exynos4_clk_aclk_200,
-	&exynos4_clk_aclk_100,
-	&exynos4_clk_aclk_160,
-	&exynos4_clk_aclk_133,
-	&exynos4_clk_dout_mmc0,
-	&exynos4_clk_dout_mmc1,
-	&exynos4_clk_dout_mmc2,
-	&exynos4_clk_dout_mmc3,
-	&exynos4_clk_dout_mmc4,
-	&exynos4_clk_mout_mfc0,
-	&exynos4_clk_mout_mfc1,
-};
-
-static struct clk *exynos4_clk_cdev[] = {
-	&exynos4_clk_pdma0,
-	&exynos4_clk_pdma1,
-	&exynos4_clk_mdma1,
-	&exynos4_clk_fimd0,
-};
-
-static struct clksrc_clk *exynos4_clksrc_cdev[] = {
-	&exynos4_clk_sclk_uart0,
-	&exynos4_clk_sclk_uart1,
-	&exynos4_clk_sclk_uart2,
-	&exynos4_clk_sclk_uart3,
-	&exynos4_clk_sclk_mmc0,
-	&exynos4_clk_sclk_mmc1,
-	&exynos4_clk_sclk_mmc2,
-	&exynos4_clk_sclk_mmc3,
-	&exynos4_clk_sclk_spi0,
-	&exynos4_clk_sclk_spi1,
-	&exynos4_clk_sclk_spi2,
-	&exynos4_clk_mdout_spi0,
-	&exynos4_clk_mdout_spi1,
-	&exynos4_clk_mdout_spi2,
-};
-
-static struct clk_lookup exynos4_clk_lookup[] = {
-	CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk),
-	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
-	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
-	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
-	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
-	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
-	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
-	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
-	CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
-	CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
-	CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
-};
-
-static int xtal_rate;
-
-static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
-{
-	if (soc_is_exynos4210())
-		return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0),
-					pll_4508);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0));
-	else
-		return 0;
-}
-
-static struct clk_ops exynos4_fout_apll_ops = {
-	.get_rate = exynos4_fout_apll_get_rate,
-};
-
-static u32 exynos4_vpll_div[][8] = {
-	{  54000000, 3, 53, 3, 1024, 0, 17, 0 },
-	{ 108000000, 3, 53, 2, 1024, 0, 17, 0 },
-};
-
-static unsigned long exynos4_vpll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int vpll_con0, vpll_con1 = 0;
-	unsigned int i;
-
-	/* Return if nothing changed */
-	if (clk->rate == rate)
-		return 0;
-
-	vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0);
-	vpll_con0 &= ~(0x1 << 27 |					\
-			PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |	\
-			PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |	\
-			PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
-	vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1);
-	vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT |	\
-			PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT |	\
-			PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
-
-	for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) {
-		if (exynos4_vpll_div[i][0] == rate) {
-			vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
-			vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
-			vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
-			vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
-			vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT;
-			vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT;
-			vpll_con0 |= exynos4_vpll_div[i][7] << 27;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(exynos4_vpll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
-				__func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(vpll_con0, EXYNOS4_VPLL_CON0);
-	__raw_writel(vpll_con1, EXYNOS4_VPLL_CON1);
-
-	/* Wait for VPLL lock */
-	while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
-		continue;
-
-	clk->rate = rate;
-	return 0;
-}
-
-static struct clk_ops exynos4_vpll_ops = {
-	.get_rate = exynos4_vpll_get_rate,
-	.set_rate = exynos4_vpll_set_rate,
-};
-
-void __init_or_cpufreq exynos4_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long apll = 0;
-	unsigned long mpll = 0;
-	unsigned long epll = 0;
-	unsigned long vpll = 0;
-	unsigned long vpllsrc;
-	unsigned long xtal;
-	unsigned long armclk;
-	unsigned long sclk_dmc;
-	unsigned long aclk_200;
-	unsigned long aclk_100;
-	unsigned long aclk_160;
-	unsigned long aclk_133;
-	unsigned int ptr;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-
-	xtal_rate = xtal;
-
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	if (soc_is_exynos4210()) {
-		apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0),
-					pll_4508);
-		mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0),
-					pll_4508);
-		epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
-					__raw_readl(EXYNOS4_EPLL_CON1), pll_4600);
-
-		vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
-		vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
-					__raw_readl(EXYNOS4_VPLL_CON1), pll_4650c);
-	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
-		apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0));
-		mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0));
-		epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
-					__raw_readl(EXYNOS4_EPLL_CON1));
-
-		vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
-		vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
-					__raw_readl(EXYNOS4_VPLL_CON1));
-	} else {
-		/* nothing */
-	}
-
-	clk_fout_apll.ops = &exynos4_fout_apll_ops;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_vpll.ops = &exynos4_vpll_ops;
-	clk_fout_vpll.rate = vpll;
-
-	printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
-			apll, mpll, epll, vpll);
-
-	armclk = clk_get_rate(&exynos4_clk_armclk.clk);
-	sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk);
-
-	aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk);
-	aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk);
-	aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk);
-	aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk);
-
-	printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
-			 "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
-			armclk, sclk_dmc, aclk_200,
-			aclk_100, aclk_160, aclk_133);
-
-	clk_f.rate = armclk;
-	clk_h.rate = sclk_dmc;
-	clk_p.rate = aclk_100;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++)
-		s3c_set_clksrc(&exynos4_clksrcs[ptr], true);
-}
-
-static struct clk *exynos4_clks[] __initdata = {
-	&exynos4_clk_sclk_hdmi27m,
-	&exynos4_clk_sclk_hdmiphy,
-	&exynos4_clk_sclk_usbphy0,
-	&exynos4_clk_sclk_usbphy1,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-	return 0;
-}
-
-static void exynos4_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-}
-
-#else
-#define exynos4_clock_suspend NULL
-#define exynos4_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4_clock_syscore_ops = {
-	.suspend	= exynos4_clock_suspend,
-	.resume		= exynos4_clock_resume,
-};
-
-void __init exynos4_register_clocks(void)
-{
-	int ptr;
-
-	s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++)
-		s3c_register_clksrc(exynos4_sysclks[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++)
-		s3c_register_clksrc(exynos4_sclk_tv[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++)
-		s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1);
-
-	s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs));
-	s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on));
-
-	s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev));
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++)
-		s3c_disable_clocks(exynos4_clk_cdev[ptr], 1);
-
-	s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
-	s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
-	clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
-
-	register_syscore_ops(&exynos4_clock_syscore_ops);
-	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
-}

arch/arm/mach-exynos/clock-exynos4.h

@@ -1,35 +0,0 @@
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk exynos4_clk_aclk_133;
-extern struct clksrc_clk exynos4_clk_mout_mpll;
-
-extern struct clksrc_sources exynos4_clkset_mout_corebus;
-extern struct clksrc_sources exynos4_clkset_group;
-
-extern struct clk *exynos4_clkset_aclk_top_list[];
-extern struct clk *exynos4_clkset_group_list[];
-
-extern struct clksrc_sources exynos4_clkset_mout_g2d0;
-extern struct clksrc_sources exynos4_clkset_mout_g2d1;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */

arch/arm/mach-exynos/clock-exynos4210.c

@@ -1,187 +0,0 @@
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4210_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
-	SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
-};
-#endif
-
-static struct clksrc_clk *sysclks[] = {
-	/* nothing here yet */
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d0 = {
-	.clk	= {
-		.name		= "mout_g2d0",
-	},
-	.sources = &exynos4_clkset_mout_g2d0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d1 = {
-	.clk	= {
-		.name		= "mout_g2d1",
-	},
-	.sources = &exynos4_clkset_mout_g2d1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4210_clkset_mout_g2d_list[] = {
-	[0] = &exynos4210_clk_mout_g2d0.clk,
-	[1] = &exynos4210_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4210_clkset_mout_g2d = {
-	.sources	= exynos4210_clkset_mout_g2d_list,
-	.nr_sources	= ARRAY_SIZE(exynos4210_clkset_mout_g2d_list),
-};
-
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk		= {
-			.name		= "sclk_sata",
-			.id		= -1,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos4_clkset_mout_corebus,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.1",
-			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimg2d",
-		},
-		.sources = &exynos4210_clkset_mout_g2d,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
-	},
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sataphy",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sata",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "fimd",
-		.devname	= "exynos4-fb.1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.9",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.11",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "fimg2d",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4210_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-
-	return 0;
-}
-
-static void exynos4210_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-}
-
-#else
-#define exynos4210_clock_suspend NULL
-#define exynos4210_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4210_clock_syscore_ops = {
-	.suspend	= exynos4210_clock_suspend,
-	.resume		= exynos4210_clock_resume,
-};
-
-void __init exynos4210_register_clocks(void)
-{
-	int ptr;
-
-	exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
-	exynos4_clk_mout_mpll.reg_src.shift = 8;
-	exynos4_clk_mout_mpll.reg_src.size = 1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	register_syscore_ops(&exynos4210_clock_syscore_ops);
-}

arch/arm/mach-exynos/clock-exynos4212.c

@@ -1,201 +0,0 @@
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4212 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4212_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
-	SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
-	SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR),
-};
-#endif
-
-static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static struct clk *clk_src_mpll_user_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_mpll_user = {
-	.sources	= clk_src_mpll_user_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk clk_mout_mpll_user = {
-	.clk = {
-		.name		= "mout_mpll_user",
-	},
-	.sources	= &clk_src_mpll_user,
-	.reg_src	= { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d0 = {
-	.clk	= {
-		.name		= "mout_g2d0",
-	},
-	.sources = &exynos4_clkset_mout_g2d0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d1 = {
-	.clk	= {
-		.name		= "mout_g2d1",
-	},
-	.sources = &exynos4_clkset_mout_g2d1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos4x12_clkset_mout_g2d_list[] = {
-	[0] = &exynos4x12_clk_mout_g2d0.clk,
-	[1] = &exynos4x12_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4x12_clkset_mout_g2d = {
-	.sources	= exynos4x12_clkset_mout_g2d_list,
-	.nr_sources	= ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list),
-};
-
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_mpll_user,
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_fimg2d",
-		},
-		.sources = &exynos4x12_clkset_mout_g2d,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 },
-	},
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.9",
-		.enable		= exynos4_clk_ip_dmc_ctrl,
-		.ctrlbit	= (1 << 24),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.12",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (7 << 8),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.13",
-		.enable		= exynos4212_clk_ip_isp1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.14",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.15",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "flite",
-		.devname	= "exynos-fimc-lite.0",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "flite",
-		.devname	= "exynos-fimc-lite.1",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "fimg2d",
-		.enable		= exynos4_clk_ip_dmc_ctrl,
-		.ctrlbit	= (1 << 23),
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4212_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-
-	return 0;
-}
-
-static void exynos4212_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-}
-
-#else
-#define exynos4212_clock_suspend NULL
-#define exynos4212_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4212_clock_syscore_ops = {
-	.suspend	= exynos4212_clock_suspend,
-	.resume		= exynos4212_clock_resume,
-};
-
-void __init exynos4212_register_clocks(void)
-{
-	int ptr;
-
-	/* usbphy1 is removed */
-	exynos4_clkset_group_list[4] = NULL;
-
-	/* mout_mpll_user is used */
-	exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk;
-	exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
-
-	exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC;
-	exynos4_clk_mout_mpll.reg_src.shift = 12;
-	exynos4_clk_mout_mpll.reg_src.size = 1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	register_syscore_ops(&exynos4212_clock_syscore_ops);
-}

arch/arm/mach-exynos/clock-exynos5.c

@@ -1,1645 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Clock support for EXYNOS5 SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos5_clock_save[] = {
-	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_TOP),
-	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_GSCL),
-	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_DISP1_0),
-	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_FSYS),
-	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_MAUDIO),
-	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC0),
-	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC1),
-	SAVE_ITEM(EXYNOS5_CLKGATE_IP_GSCL),
-	SAVE_ITEM(EXYNOS5_CLKGATE_IP_DISP1),
-	SAVE_ITEM(EXYNOS5_CLKGATE_IP_MFC),
-	SAVE_ITEM(EXYNOS5_CLKGATE_IP_G3D),
-	SAVE_ITEM(EXYNOS5_CLKGATE_IP_GEN),
-	SAVE_ITEM(EXYNOS5_CLKGATE_IP_FSYS),
-	SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIC),
-	SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIS),
-	SAVE_ITEM(EXYNOS5_CLKGATE_BLOCK),
-	SAVE_ITEM(EXYNOS5_CLKDIV_TOP0),
-	SAVE_ITEM(EXYNOS5_CLKDIV_TOP1),
-	SAVE_ITEM(EXYNOS5_CLKDIV_GSCL),
-	SAVE_ITEM(EXYNOS5_CLKDIV_DISP1_0),
-	SAVE_ITEM(EXYNOS5_CLKDIV_GEN),
-	SAVE_ITEM(EXYNOS5_CLKDIV_MAUDIO),
-	SAVE_ITEM(EXYNOS5_CLKDIV_FSYS0),
-	SAVE_ITEM(EXYNOS5_CLKDIV_FSYS1),
-	SAVE_ITEM(EXYNOS5_CLKDIV_FSYS2),
-	SAVE_ITEM(EXYNOS5_CLKDIV_FSYS3),
-	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC0),
-	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC1),
-	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC2),
-	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC3),
-	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC4),
-	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC5),
-	SAVE_ITEM(EXYNOS5_SCLK_DIV_ISP),
-	SAVE_ITEM(EXYNOS5_CLKSRC_TOP0),
-	SAVE_ITEM(EXYNOS5_CLKSRC_TOP1),
-	SAVE_ITEM(EXYNOS5_CLKSRC_TOP2),
-	SAVE_ITEM(EXYNOS5_CLKSRC_TOP3),
-	SAVE_ITEM(EXYNOS5_CLKSRC_GSCL),
-	SAVE_ITEM(EXYNOS5_CLKSRC_DISP1_0),
-	SAVE_ITEM(EXYNOS5_CLKSRC_MAUDIO),
-	SAVE_ITEM(EXYNOS5_CLKSRC_FSYS),
-	SAVE_ITEM(EXYNOS5_CLKSRC_PERIC0),
-	SAVE_ITEM(EXYNOS5_CLKSRC_PERIC1),
-	SAVE_ITEM(EXYNOS5_SCLK_SRC_ISP),
-	SAVE_ITEM(EXYNOS5_EPLL_CON0),
-	SAVE_ITEM(EXYNOS5_EPLL_CON1),
-	SAVE_ITEM(EXYNOS5_EPLL_CON2),
-	SAVE_ITEM(EXYNOS5_VPLL_CON0),
-	SAVE_ITEM(EXYNOS5_VPLL_CON1),
-	SAVE_ITEM(EXYNOS5_VPLL_CON2),
-	SAVE_ITEM(EXYNOS5_PWR_CTRL1),
-	SAVE_ITEM(EXYNOS5_PWR_CTRL2),
-};
-#endif
-
-static struct clk exynos5_clk_sclk_dptxphy = {
-	.name		= "sclk_dptx",
-};
-
-static struct clk exynos5_clk_sclk_hdmi24m = {
-	.name		= "sclk_hdmi24m",
-	.rate		= 24000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmi27m = {
-	.name		= "sclk_hdmi27m",
-	.rate		= 27000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmiphy = {
-	.name		= "sclk_hdmiphy",
-};
-
-static struct clk exynos5_clk_sclk_usbphy = {
-	.name		= "sclk_usbphy",
-	.rate		= 48000000,
-};
-
-static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable);
-}
-
-static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable);
-}
-
-static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
-}
-
-static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable);
-}
-
-static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
-}
-
-static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
-}
-
-static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable);
-}
-
-static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos5_clk_block_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable);
-}
-
-static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
-}
-
-static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable);
-}
-
-static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
-}
-
-static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable);
-}
-
-static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos5_clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.sources = &clk_src_apll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_apll = {
-	.clk	= {
-		.name		= "sclk_apll",
-		.parent		= &exynos5_clk_mout_apll.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
-	.clk	= {
-		.name		= "mout_bpll_fout",
-	},
-	.sources = &clk_src_bpll_fout,
-	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_bpll_list[] = {
-	[0] = &clk_fin_bpll,
-	[1] = &exynos5_clk_mout_bpll_fout.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_bpll = {
-	.sources	= exynos5_clk_src_bpll_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_bpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll = {
-	.clk	= {
-		.name		= "mout_bpll",
-	},
-	.sources = &exynos5_clk_src_bpll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_bpll_user_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_bpll_user = {
-	.sources	= exynos5_clk_src_bpll_user_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_bpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll_user = {
-	.clk	= {
-		.name		= "mout_bpll_user",
-	},
-	.sources = &exynos5_clk_src_bpll_user,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpll = {
-	.clk	= {
-		.name		= "mout_cpll",
-	},
-	.sources = &clk_src_cpll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.sources = &clk_src_epll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
-	.clk	= {
-		.name		= "mout_mpll_fout",
-	},
-	.sources = &clk_src_mpll_fout,
-	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &exynos5_clk_mout_mpll_fout.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_mpll = {
-	.sources	= exynos5_clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_mpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-	},
-	.sources = &exynos5_clk_src_mpll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
-};
-
-static struct clk *exynos_clkset_vpllsrc_list[] = {
-	[0] = &clk_fin_vpll,
-	[1] = &exynos5_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos5_clkset_vpllsrc = {
-	.sources	= exynos_clkset_vpllsrc_list,
-	.nr_sources	= ARRAY_SIZE(exynos_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos5_clk_vpllsrc = {
-	.clk	= {
-		.name		= "vpll_src",
-		.enable		= exynos5_clksrc_mask_top_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos5_clkset_vpllsrc,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_sclk_vpll_list[] = {
-	[0] = &exynos5_clk_vpllsrc.clk,
-	[1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_vpll = {
-	.sources	= exynos5_clkset_sclk_vpll_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_vpll = {
-	.clk	= {
-		.name		= "sclk_vpll",
-	},
-	.sources = &exynos5_clkset_sclk_vpll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_pixel = {
-	.clk	= {
-		.name		= "sclk_pixel",
-		.parent		= &exynos5_clk_sclk_vpll.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 },
-};
-
-static struct clk *exynos5_clkset_sclk_hdmi_list[] = {
-	[0] = &exynos5_clk_sclk_pixel.clk,
-	[1] = &exynos5_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_hdmi = {
-	.sources	= exynos5_clkset_sclk_hdmi_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_hdmi = {
-	.clk	= {
-		.name		= "sclk_hdmi",
-		.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
-		.ctrlbit	= (1 << 20),
-	},
-	.sources = &exynos5_clkset_sclk_hdmi,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk *exynos5_sclk_tv[] = {
-	&exynos5_clk_sclk_pixel,
-	&exynos5_clk_sclk_hdmi,
-};
-
-static struct clk *exynos5_clk_src_mpll_user_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_mpll_user = {
-	.sources	= exynos5_clk_src_mpll_user_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll_user = {
-	.clk	= {
-		.name		= "mout_mpll_user",
-	},
-	.sources = &exynos5_clk_src_mpll_user,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_mout_cpu_list[] = {
-	[0] = &exynos5_clk_mout_apll.clk,
-	[1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_mout_cpu = {
-	.sources	= exynos5_clkset_mout_cpu_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_mout_cpu_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpu = {
-	.clk	= {
-		.name		= "mout_cpu",
-	},
-	.sources = &exynos5_clkset_mout_cpu,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_armclk = {
-	.clk	= {
-		.name		= "dout_armclk",
-		.parent		= &exynos5_clk_mout_cpu.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_arm2clk = {
-	.clk	= {
-		.name		= "dout_arm2clk",
-		.parent		= &exynos5_clk_dout_armclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 },
-};
-
-static struct clk exynos5_clk_armclk = {
-	.name		= "armclk",
-	.parent		= &exynos5_clk_dout_arm2clk.clk,
-};
-
-/* Core list of CMU_CDREX side */
-
-static struct clk *exynos5_clkset_cdrex_list[] = {
-	[0] = &exynos5_clk_mout_mpll.clk,
-	[1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_cdrex = {
-	.sources	= exynos5_clkset_cdrex_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_cdrex_list),
-};
-
-static struct clksrc_clk exynos5_clk_cdrex = {
-	.clk	= {
-		.name		= "clk_cdrex",
-	},
-	.sources = &exynos5_clkset_cdrex,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_acp = {
-	.clk	= {
-		.name		= "aclk_acp",
-		.parent		= &exynos5_clk_mout_mpll.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_pclk_acp = {
-	.clk	= {
-		.name		= "pclk_acp",
-		.parent		= &exynos5_clk_aclk_acp.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-static struct clk *exynos5_clkset_aclk_top_list[] = {
-	[0] = &exynos5_clk_mout_mpll_user.clk,
-	[1] = &exynos5_clk_mout_bpll_user.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk = {
-	.sources	= exynos5_clkset_aclk_top_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_400 = {
-	.clk	= {
-		.name		= "aclk_400",
-	},
-	.sources = &exynos5_clkset_aclk,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
-};
-
-static struct clk *exynos5_clkset_aclk_333_166_list[] = {
-	[0] = &exynos5_clk_mout_cpll.clk,
-	[1] = &exynos5_clk_mout_mpll_user.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_333_166 = {
-	.sources	= exynos5_clkset_aclk_333_166_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_333 = {
-	.clk	= {
-		.name		= "aclk_333",
-	},
-	.sources = &exynos5_clkset_aclk_333_166,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_166 = {
-	.clk	= {
-		.name		= "aclk_166",
-	},
-	.sources = &exynos5_clkset_aclk_333_166,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_266 = {
-	.clk	= {
-		.name		= "aclk_266",
-		.parent		= &exynos5_clk_mout_mpll_user.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_200 = {
-	.clk	= {
-		.name		= "aclk_200",
-	},
-	.sources = &exynos5_clkset_aclk,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66_pre = {
-	.clk	= {
-		.name		= "aclk_66_pre",
-		.parent		= &exynos5_clk_mout_mpll_user.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66 = {
-	.clk	= {
-		.name		= "aclk_66",
-		.parent		= &exynos5_clk_aclk_66_pre.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
-	.clk	= {
-		.name		= "mout_aclk_300_gscl_mid",
-	},
-	.sources = &exynos5_clkset_aclk,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
-	[0] = &exynos5_clk_sclk_vpll.clk,
-	[1] = &exynos5_clk_mout_cpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
-	.sources	= exynos5_clkset_aclk_300_mid1_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
-	.clk	= {
-		.name		= "mout_aclk_300_gscl_mid1",
-	},
-	.sources = &exynos5_clkset_aclk_300_gscl_mid1,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
-	[0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
-	[1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
-	.sources	= exynos5_clkset_aclk_300_gscl_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
-	.clk	= {
-		.name		= "mout_aclk_300_gscl",
-	},
-	.sources = &exynos5_clkset_aclk_300_gscl,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_gscl_300_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = &exynos5_clk_mout_aclk_300_gscl.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_gscl_300 = {
-	.sources	= exynos5_clk_src_gscl_300_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
-	.clk	= {
-		.name		= "aclk_300_gscl",
-	},
-	.sources = &exynos5_clk_src_gscl_300,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
-};
-
-static struct clk exynos5_init_clocks_off[] = {
-	{
-		.name		= "timers",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 24),
-	}, {
-		.name		= "tmu_apbif",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peris_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "rtc",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peris_ctrl,
-		.ctrlbit	= (1 << 20),
-	}, {
-		.name		= "watchdog",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peris_ctrl,
-		.ctrlbit	= (1 << 19),
-	}, {
-		.name		= "biu",	/* bus interface unit clock */
-		.devname	= "dw_mmc.0",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "biu",
-		.devname	= "dw_mmc.1",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "biu",
-		.devname	= "dw_mmc.2",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 14),
-	}, {
-		.name		= "biu",
-		.devname	= "dw_mmc.3",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "sata",
-		.devname	= "exynos5-sata",
-		.parent         = &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "sata-phy",
-		.devname	= "exynos5-sata-phy",
-		.parent         = &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 24),
-	}, {
-		.name		= "i2c",
-		.devname	= "exynos5-sata-phy-i2c",
-		.parent         = &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "mfc",
-		.devname	= "s5p-mfc-v6",
-		.enable		= exynos5_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "hdmi",
-		.devname	= "exynos5-hdmi",
-		.enable		= exynos5_clk_ip_disp1_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "hdmiphy",
-		.devname	= "exynos5-hdmi",
-		.enable		= exynos5_clk_hdmiphy_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "mixer",
-		.devname	= "exynos5-mixer",
-		.enable		= exynos5_clk_ip_disp1_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "dp",
-		.devname	= "exynos-dp",
-		.enable		= exynos5_clk_ip_disp1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "jpeg",
-		.enable		= exynos5_clk_ip_gen_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "dsim0",
-		.enable		= exynos5_clk_ip_disp1_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.1",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 20),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.2",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.1",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 22),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.2",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 23),
-	}, {
-		.name		= "spdif",
-		.devname	= "samsung-spdif",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 26),
-	}, {
-		.name		= "ac97",
-		.devname	= "samsung-ac97",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 27),
-	}, {
-		.name		= "usbhost",
-		.enable		= exynos5_clk_ip_fsys_ctrl ,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "usbotg",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "nfcon",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 22),
-	}, {
-		.name		= "iop",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= ((1 << 30) | (1 << 26) | (1 << 23)),
-	}, {
-		.name		= "core_iop",
-		.enable		= exynos5_clk_ip_core_ctrl,
-		.ctrlbit	= ((1 << 21) | (1 << 3)),
-	}, {
-		.name		= "mcu_iop",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.0",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.2",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.3",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.4",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.5",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.6",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.7",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-hdmiphy-i2c",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 14),
-	}, {
-		.name		= "spi",
-		.devname	= "exynos4210-spi.0",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "spi",
-		.devname	= "exynos4210-spi.1",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 17),
-	}, {
-		.name		= "spi",
-		.devname	= "exynos4210-spi.2",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "gscl",
-		.devname	= "exynos-gsc.0",
-		.enable		= exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "gscl",
-		.devname	= "exynos-gsc.1",
-		.enable		= exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "gscl",
-		.devname	= "exynos-gsc.2",
-		.enable		= exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "gscl",
-		.devname	= "exynos-gsc.3",
-		.enable		= exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.1",
-		.enable		= &exynos5_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.0",
-		.enable		= &exynos5_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.2",
-		.enable		= &exynos5_clk_ip_disp1_ctrl,
-		.ctrlbit	= (1 << 9)
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.3",
-		.enable		= &exynos5_clk_ip_gen_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.4",
-		.enable		= &exynos5_clk_ip_gen_ctrl,
-		.ctrlbit	= (1 << 6)
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.5",
-		.enable		= &exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.6",
-		.enable		= &exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.7",
-		.enable		= &exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.8",
-		.enable		= &exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.9",
-		.enable		= &exynos5_clk_ip_isp0_ctrl,
-		.ctrlbit	= (0x3F << 8),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.10",
-		.enable		= &exynos5_clk_ip_isp1_ctrl,
-		.ctrlbit	= (0xF << 4),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.11",
-		.enable		= &exynos5_clk_ip_disp1_ctrl,
-		.ctrlbit	= (1 << 8)
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.12",
-		.enable		= &exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.13",
-		.enable		= &exynos5_clk_ip_gscl_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.14",
-		.enable		= &exynos5_clk_ip_acp_ctrl,
-		.ctrlbit	= (1 << 7)
-	}
-};
-
-static struct clk exynos5_init_clocks_on[] = {
-	{
-		.name		= "uart",
-		.devname	= "s5pv210-uart.0",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.1",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.2",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.3",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.4",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.5",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 5),
-	}
-};
-
-static struct clk exynos5_clk_pdma0 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.0",
-	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
-};
-
-static struct clk exynos5_clk_pdma1 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.1",
-	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 2),
-};
-
-static struct clk exynos5_clk_mdma1 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.2",
-	.enable		= exynos5_clk_ip_gen_ctrl,
-	.ctrlbit	= (1 << 4),
-};
-
-static struct clk exynos5_clk_fimd1 = {
-	.name		= "fimd",
-	.devname	= "exynos5-fb.1",
-	.enable		= exynos5_clk_ip_disp1_ctrl,
-	.ctrlbit	= (1 << 0),
-};
-
-static struct clk *exynos5_clkset_group_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = NULL,
-	[2] = &exynos5_clk_sclk_hdmi24m,
-	[3] = &exynos5_clk_sclk_dptxphy,
-	[4] = &exynos5_clk_sclk_usbphy,
-	[5] = &exynos5_clk_sclk_hdmiphy,
-	[6] = &exynos5_clk_mout_mpll_user.clk,
-	[7] = &exynos5_clk_mout_epll.clk,
-	[8] = &exynos5_clk_sclk_vpll.clk,
-	[9] = &exynos5_clk_mout_cpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_group = {
-	.sources	= exynos5_clkset_group_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_group_list),
-};
-
-/* Possible clock sources for aclk_266_gscl_sub Mux */
-static struct clk *clk_src_gscl_266_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = &exynos5_clk_aclk_266.clk,
-};
-
-static struct clksrc_sources clk_src_gscl_266 = {
-	.sources	= clk_src_gscl_266_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_gscl_266_list),
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc0 = {
-	.clk		= {
-		.name		= "dout_mmc0",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc1 = {
-	.clk		= {
-		.name		= "dout_mmc1",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc2 = {
-	.clk		= {
-		.name		= "dout_mmc2",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc3 = {
-	.clk		= {
-		.name		= "dout_mmc3",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc4 = {
-	.clk		= {
-		.name		= "dout_mmc4",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart0 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.0",
-		.enable		= exynos5_clksrc_mask_peric0_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.1",
-		.enable		= exynos5_clksrc_mask_peric0_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart2 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.2",
-		.enable		= exynos5_clksrc_mask_peric0_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart3 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.3",
-		.enable		= exynos5_clksrc_mask_peric0_ctrl,
-		.ctrlbit	= (1 << 12),
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "ciu",	/* card interface unit clock */
-		.devname	= "dw_mmc.0",
-		.parent		= &exynos5_clk_dout_mmc0.clk,
-		.enable		= exynos5_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "ciu",
-		.devname	= "dw_mmc.1",
-		.parent		= &exynos5_clk_dout_mmc1.clk,
-		.enable		= exynos5_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "ciu",
-		.devname	= "dw_mmc.2",
-		.parent		= &exynos5_clk_dout_mmc2.clk,
-		.enable		= exynos5_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
-	.clk	= {
-		.name		= "ciu",
-		.devname	= "dw_mmc.3",
-		.parent		= &exynos5_clk_dout_mmc3.clk,
-		.enable		= exynos5_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 12),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi0 = {
-	.clk	= {
-		.name		= "mdout_spi",
-		.devname	= "exynos4210-spi.0",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi1 = {
-	.clk	= {
-		.name		= "mdout_spi",
-		.devname	= "exynos4210-spi.1",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi2 = {
-	.clk	= {
-		.name		= "mdout_spi",
-		.devname	= "exynos4210-spi.2",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "exynos4210-spi.0",
-		.parent		= &exynos5_clk_mdout_spi0.clk,
-		.enable		= exynos5_clksrc_mask_peric1_ctrl,
-		.ctrlbit	= (1 << 16),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "exynos4210-spi.1",
-		.parent		= &exynos5_clk_mdout_spi1.clk,
-		.enable		= exynos5_clksrc_mask_peric1_ctrl,
-		.ctrlbit	= (1 << 20),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi2 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "exynos4210-spi.2",
-		.parent		= &exynos5_clk_mdout_spi2.clk,
-		.enable		= exynos5_clksrc_mask_peric1_ctrl,
-		.ctrlbit	= (1 << 24),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_fimd1 = {
-	.clk	= {
-		.name		= "sclk_fimd",
-		.devname	= "exynos5-fb.1",
-		.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "aclk_266_gscl",
-		},
-		.sources = &clk_src_gscl_266,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 },
-	}, {
-		.clk	= {
-			.name		= "sclk_g3d",
-			.devname	= "mali-t604.0",
-			.enable		= exynos5_clk_block_ctrl,
-			.ctrlbit	= (1 << 1),
-		},
-		.sources = &exynos5_clkset_aclk,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "sclk_sata",
-			.devname	= "exynos5-sata",
-			.enable		= exynos5_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos5_clkset_aclk,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS0, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_gscl_wrap",
-			.devname	= "s5p-mipi-csis.0",
-			.enable		= exynos5_clksrc_mask_gscl_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_gscl_wrap",
-			.devname	= "s5p-mipi-csis.1",
-			.enable		= exynos5_clksrc_mask_gscl_ctrl,
-			.ctrlbit	= (1 << 28),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_cam0",
-			.enable		= exynos5_clksrc_mask_gscl_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_cam1",
-			.enable		= exynos5_clksrc_mask_gscl_ctrl,
-			.ctrlbit	= (1 << 20),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_jpeg",
-			.parent		= &exynos5_clk_mout_cpll.clk,
-		},
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 },
-	},
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos5_sysclks[] = {
-	&exynos5_clk_mout_apll,
-	&exynos5_clk_sclk_apll,
-	&exynos5_clk_mout_bpll,
-	&exynos5_clk_mout_bpll_fout,
-	&exynos5_clk_mout_bpll_user,
-	&exynos5_clk_mout_cpll,
-	&exynos5_clk_mout_epll,
-	&exynos5_clk_mout_mpll,
-	&exynos5_clk_mout_mpll_fout,
-	&exynos5_clk_mout_mpll_user,
-	&exynos5_clk_vpllsrc,
-	&exynos5_clk_sclk_vpll,
-	&exynos5_clk_mout_cpu,
-	&exynos5_clk_dout_armclk,
-	&exynos5_clk_dout_arm2clk,
-	&exynos5_clk_cdrex,
-	&exynos5_clk_aclk_400,
-	&exynos5_clk_aclk_333,
-	&exynos5_clk_aclk_266,
-	&exynos5_clk_aclk_200,
-	&exynos5_clk_aclk_166,
-	&exynos5_clk_aclk_300_gscl,
-	&exynos5_clk_mout_aclk_300_gscl,
-	&exynos5_clk_mout_aclk_300_gscl_mid,
-	&exynos5_clk_mout_aclk_300_gscl_mid1,
-	&exynos5_clk_aclk_66_pre,
-	&exynos5_clk_aclk_66,
-	&exynos5_clk_dout_mmc0,
-	&exynos5_clk_dout_mmc1,
-	&exynos5_clk_dout_mmc2,
-	&exynos5_clk_dout_mmc3,
-	&exynos5_clk_dout_mmc4,
-	&exynos5_clk_aclk_acp,
-	&exynos5_clk_pclk_acp,
-	&exynos5_clk_sclk_spi0,
-	&exynos5_clk_sclk_spi1,
-	&exynos5_clk_sclk_spi2,
-	&exynos5_clk_mdout_spi0,
-	&exynos5_clk_mdout_spi1,
-	&exynos5_clk_mdout_spi2,
-	&exynos5_clk_sclk_fimd1,
-};
-
-static struct clk *exynos5_clk_cdev[] = {
-	&exynos5_clk_pdma0,
-	&exynos5_clk_pdma1,
-	&exynos5_clk_mdma1,
-	&exynos5_clk_fimd1,
-};
-
-static struct clksrc_clk *exynos5_clksrc_cdev[] = {
-	&exynos5_clk_sclk_uart0,
-	&exynos5_clk_sclk_uart1,
-	&exynos5_clk_sclk_uart2,
-	&exynos5_clk_sclk_uart3,
-	&exynos5_clk_sclk_mmc0,
-	&exynos5_clk_sclk_mmc1,
-	&exynos5_clk_sclk_mmc2,
-	&exynos5_clk_sclk_mmc3,
-};
-
-static struct clk_lookup exynos5_clk_lookup[] = {
-	CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk),
-	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
-	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
-	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
-	CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk),
-	CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk),
-	CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk),
-	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
-	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
-	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
-	CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1),
-};
-
-static unsigned long exynos5_epll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-static struct clk *exynos5_clks[] __initdata = {
-	&exynos5_clk_sclk_hdmi27m,
-	&exynos5_clk_sclk_hdmiphy,
-	&clk_fout_bpll,
-	&clk_fout_bpll_div2,
-	&clk_fout_cpll,
-	&clk_fout_mpll_div2,
-	&exynos5_clk_armclk,
-};
-
-static u32 epll_div[][6] = {
-	{ 192000000, 0, 48, 3, 1, 0 },
-	{ 180000000, 0, 45, 3, 1, 0 },
-	{  73728000, 1, 73, 3, 3, 47710 },
-	{  67737600, 1, 90, 4, 3, 20762 },
-	{  49152000, 0, 49, 3, 3, 9961 },
-	{  45158400, 0, 45, 3, 3, 10381 },
-	{ 180633600, 0, 45, 3, 1, 10381 },
-};
-
-static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con, epll_con_k;
-	unsigned int i;
-	unsigned int tmp;
-	unsigned int epll_rate;
-	unsigned int locktime;
-	unsigned int lockcnt;
-
-	/* Return if nothing changed */
-	if (clk->rate == rate)
-		return 0;
-
-	if (clk->parent)
-		epll_rate = clk_get_rate(clk->parent);
-	else
-		epll_rate = clk_ext_xtal_mux.rate;
-
-	if (epll_rate != 24000000) {
-		pr_err("Invalid Clock : recommended clock is 24MHz.\n");
-		return -EINVAL;
-	}
-
-	epll_con = __raw_readl(EXYNOS5_EPLL_CON0);
-	epll_con &= ~(0x1 << 27 | \
-			PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |   \
-			PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
-			PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		if (epll_div[i][0] == rate) {
-			epll_con_k = epll_div[i][5] << 0;
-			epll_con |= epll_div[i][1] << 27;
-			epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT;
-			epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT;
-			epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
-				__func__);
-		return -EINVAL;
-	}
-
-	epll_rate /= 1000000;
-
-	/* 3000 max_cycls : specification data */
-	locktime = 3000 / epll_rate * epll_div[i][3];
-	lockcnt = locktime * 10000 / (10000 / epll_rate);
-
-	__raw_writel(lockcnt, EXYNOS5_EPLL_LOCK);
-
-	__raw_writel(epll_con, EXYNOS5_EPLL_CON0);
-	__raw_writel(epll_con_k, EXYNOS5_EPLL_CON1);
-
-	do {
-		tmp = __raw_readl(EXYNOS5_EPLL_CON0);
-	} while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT));
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops exynos5_epll_ops = {
-	.get_rate = exynos5_epll_get_rate,
-	.set_rate = exynos5_epll_set_rate,
-};
-
-static int xtal_rate;
-
-static unsigned long exynos5_fout_apll_get_rate(struct clk *clk)
-{
-	return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0));
-}
-
-static struct clk_ops exynos5_fout_apll_ops = {
-	.get_rate = exynos5_fout_apll_get_rate,
-};
-
-#ifdef CONFIG_PM
-static int exynos5_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-
-	return 0;
-}
-
-static void exynos5_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-}
-#else
-#define exynos5_clock_suspend NULL
-#define exynos5_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos5_clock_syscore_ops = {
-	.suspend	= exynos5_clock_suspend,
-	.resume		= exynos5_clock_resume,
-};
-
-void __init_or_cpufreq exynos5_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long apll;
-	unsigned long bpll;
-	unsigned long cpll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long vpll;
-	unsigned long vpllsrc;
-	unsigned long xtal;
-	unsigned long armclk;
-	unsigned long mout_cdrex;
-	unsigned long aclk_400;
-	unsigned long aclk_333;
-	unsigned long aclk_266;
-	unsigned long aclk_200;
-	unsigned long aclk_166;
-	unsigned long aclk_66;
-	unsigned int ptr;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-
-	xtal_rate = xtal;
-
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0));
-	bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0));
-	cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0));
-	mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0));
-	epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0),
-			__raw_readl(EXYNOS5_EPLL_CON1));
-
-	vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk);
-	vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0),
-			__raw_readl(EXYNOS5_VPLL_CON1));
-
-	clk_fout_apll.ops = &exynos5_fout_apll_ops;
-	clk_fout_bpll.rate = bpll;
-	clk_fout_bpll_div2.rate = bpll >> 1;
-	clk_fout_cpll.rate = cpll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_mpll_div2.rate = mpll >> 1;
-	clk_fout_epll.rate = epll;
-	clk_fout_vpll.rate = vpll;
-
-	printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n"
-			"M=%ld, E=%ld V=%ld",
-			apll, bpll, cpll, mpll, epll, vpll);
-
-	armclk = clk_get_rate(&exynos5_clk_armclk);
-	mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk);
-
-	aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk);
-	aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk);
-	aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk);
-	aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk);
-	aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk);
-	aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk);
-
-	printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n"
-			"ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n"
-			"ACLK166=%ld, ACLK66=%ld\n",
-			armclk, mout_cdrex, aclk_400,
-			aclk_333, aclk_266, aclk_200,
-			aclk_166, aclk_66);
-
-
-	clk_fout_epll.ops = &exynos5_epll_ops;
-
-	if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
-		printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
-				clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
-
-	clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000);
-	clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000);
-
-	clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000);
-	clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++)
-		s3c_set_clksrc(&exynos5_clksrcs[ptr], true);
-}
-
-void __init exynos5_register_clocks(void)
-{
-	int ptr;
-
-	s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++)
-		s3c_register_clksrc(exynos5_sysclks[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++)
-		s3c_register_clksrc(exynos5_sclk_tv[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++)
-		s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1);
-
-	s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs));
-	s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on));
-
-	s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev));
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++)
-		s3c_disable_clocks(exynos5_clk_cdev[ptr], 1);
-
-	s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
-	s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
-	clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup));
-
-	register_syscore_ops(&exynos5_clock_syscore_ops);
-	s3c_pwmclk_init();
-}

arch/arm/mach-exynos/common.c

@@ -25,6 +25,8 @@
 #include <linux/irqdomain.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
+#include <linux/clocksource.h>
+#include <linux/clk-provider.h>
 #include <linux/irqchip/arm-gic.h>
 
 #include <asm/proc-fns.h>
@@ -39,7 +41,6 @@
 #include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/sdhci.h>
@@ -65,17 +66,16 @@ static const char name_exynos5440[] = "EXYNOS5440";
 static void exynos4_map_io(void);
 static void exynos5_map_io(void);
 static void exynos5440_map_io(void);
-static void exynos4_init_clocks(int xtal);
-static void exynos5_init_clocks(int xtal);
 static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 static int exynos_init(void);
 
+unsigned long xxti_f = 0, xusbxti_f = 0;
+
 static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= EXYNOS4210_CPU_ID,
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4210,
@@ -83,7 +83,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= EXYNOS4212_CPU_ID,
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4212,
@@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= EXYNOS4412_CPU_ID,
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4412,
@@ -99,7 +97,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= EXYNOS5250_SOC_ID,
 		.idmask		= EXYNOS5_SOC_MASK,
 		.map_io		= exynos5_map_io,
-		.init_clocks	= exynos5_init_clocks,
 		.init		= exynos_init,
 		.name		= name_exynos5250,
 	}, {
@@ -256,11 +253,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SROMC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_SYSRAM,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSRAM),
@@ -402,43 +394,26 @@ static void __init exynos5_map_io(void)
 	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
 }
 
-static void __init exynos4_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	if (soc_is_exynos4210())
-		exynos4210_register_clocks();
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		exynos4212_register_clocks();
-
-	exynos4_register_clocks();
-	exynos4_setup_clocks();
-}
-
 static void __init exynos5440_map_io(void)
 {
 	iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
 }
 
-static void __init exynos5_init_clocks(int xtal)
+void __init exynos_init_time(void)
 {
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	/* EXYNOS5440 can support only common clock framework */
-
-	if (soc_is_exynos5440())
-		return;
-
-#ifdef CONFIG_SOC_EXYNOS5250
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	exynos5_register_clocks();
-	exynos5_setup_clocks();
+	if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
+		of_clk_init(NULL);
+		clocksource_of_init();
 #endif
+	} else {
+		/* todo: remove after migrating legacy E4 platforms to dt */
+#ifdef CONFIG_ARCH_EXYNOS4
+		exynos4_clk_init(NULL);
+		exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
+#endif
+		mct_init();
+	}
 }
 
 void __init exynos4_init_irq(void)

arch/arm/mach-exynos/common.h

@@ -12,7 +12,11 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-extern void exynos4_timer_init(void);
+#include <linux/of.h>
+
+extern void mct_init(void);
+void exynos_init_time(void);
+extern unsigned long xxti_f, xusbxti_f;
 
 struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);
@@ -22,6 +26,10 @@ void exynos4_restart(char mode, const char *cmd);
 void exynos5_restart(char mode, const char *cmd);
 void exynos_init_late(void);
 
+/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
+void exynos4_clk_init(struct device_node *np);
+void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
+
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else

arch/arm/mach-exynos/include/mach/irqs.h

@@ -30,8 +30,6 @@
 
 /* For EXYNOS4 and EXYNOS5 */
 
-#define EXYNOS_IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
-
 #define EXYNOS_IRQ_EINT16_31		IRQ_SPI(32)
 
 /* For EXYNOS4 SoCs */
@@ -323,8 +321,6 @@
 #define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
 #define EXYNOS5_IRQ_SATA		IRQ_SPI(115)
 
-#define EXYNOS5_IRQ_MCT_L0		IRQ_SPI(120)
-#define EXYNOS5_IRQ_MCT_L1		IRQ_SPI(121)
 #define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
 #define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
 #define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
@@ -419,8 +415,6 @@
 #define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(22, 4)
 
 #define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
-#define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)
 
 #define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
 #define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)

arch/arm/mach-exynos/include/mach/map.h

@@ -65,7 +65,6 @@
 #define EXYNOS5_PA_CMU			0x10010000
 
 #define EXYNOS4_PA_SYSTIMER		0x10050000
-#define EXYNOS5_PA_SYSTIMER		0x101C0000
 
 #define EXYNOS4_PA_WATCHDOG		0x10060000
 #define EXYNOS5_PA_WATCHDOG		0x101D0000

arch/arm/mach-exynos/include/mach/regs-clock.h

@@ -256,113 +256,6 @@
 #define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT		(0)
 #define EXYNOS4_CLKDIV_CAM1_JPEG_MASK		(0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
 
-/* For EXYNOS5250 */
-
-#define EXYNOS5_APLL_LOCK			EXYNOS_CLKREG(0x00000)
-#define EXYNOS5_APLL_CON0			EXYNOS_CLKREG(0x00100)
-#define EXYNOS5_CLKSRC_CPU			EXYNOS_CLKREG(0x00200)
-#define EXYNOS5_CLKMUX_STATCPU			EXYNOS_CLKREG(0x00400)
-#define EXYNOS5_CLKDIV_CPU0			EXYNOS_CLKREG(0x00500)
-#define EXYNOS5_CLKDIV_CPU1			EXYNOS_CLKREG(0x00504)
-#define EXYNOS5_CLKDIV_STATCPU0			EXYNOS_CLKREG(0x00600)
-#define EXYNOS5_CLKDIV_STATCPU1			EXYNOS_CLKREG(0x00604)
-
-#define EXYNOS5_PWR_CTRL1			EXYNOS_CLKREG(0x01020)
-#define EXYNOS5_PWR_CTRL2			EXYNOS_CLKREG(0x01024)
-
-#define EXYNOS5_MPLL_CON0			EXYNOS_CLKREG(0x04100)
-#define EXYNOS5_CLKSRC_CORE1			EXYNOS_CLKREG(0x04204)
-
-#define EXYNOS5_CLKGATE_IP_CORE			EXYNOS_CLKREG(0x04900)
-
-#define EXYNOS5_CLKDIV_ACP			EXYNOS_CLKREG(0x08500)
-
-#define EXYNOS5_EPLL_CON0			EXYNOS_CLKREG(0x10130)
-#define EXYNOS5_EPLL_CON1			EXYNOS_CLKREG(0x10134)
-#define EXYNOS5_EPLL_CON2			EXYNOS_CLKREG(0x10138)
-#define EXYNOS5_VPLL_CON0			EXYNOS_CLKREG(0x10140)
-#define EXYNOS5_VPLL_CON1			EXYNOS_CLKREG(0x10144)
-#define EXYNOS5_VPLL_CON2			EXYNOS_CLKREG(0x10148)
-#define EXYNOS5_CPLL_CON0			EXYNOS_CLKREG(0x10120)
-
-#define EXYNOS5_CLKSRC_TOP0			EXYNOS_CLKREG(0x10210)
-#define EXYNOS5_CLKSRC_TOP1			EXYNOS_CLKREG(0x10214)
-#define EXYNOS5_CLKSRC_TOP2			EXYNOS_CLKREG(0x10218)
-#define EXYNOS5_CLKSRC_TOP3			EXYNOS_CLKREG(0x1021C)
-#define EXYNOS5_CLKSRC_GSCL			EXYNOS_CLKREG(0x10220)
-#define EXYNOS5_CLKSRC_DISP1_0			EXYNOS_CLKREG(0x1022C)
-#define EXYNOS5_CLKSRC_MAUDIO			EXYNOS_CLKREG(0x10240)
-#define EXYNOS5_CLKSRC_FSYS			EXYNOS_CLKREG(0x10244)
-#define EXYNOS5_CLKSRC_PERIC0			EXYNOS_CLKREG(0x10250)
-#define EXYNOS5_CLKSRC_PERIC1			EXYNOS_CLKREG(0x10254)
-#define EXYNOS5_SCLK_SRC_ISP			EXYNOS_CLKREG(0x10270)
-
-#define EXYNOS5_CLKSRC_MASK_TOP			EXYNOS_CLKREG(0x10310)
-#define EXYNOS5_CLKSRC_MASK_GSCL		EXYNOS_CLKREG(0x10320)
-#define EXYNOS5_CLKSRC_MASK_DISP1_0		EXYNOS_CLKREG(0x1032C)
-#define EXYNOS5_CLKSRC_MASK_MAUDIO		EXYNOS_CLKREG(0x10334)
-#define EXYNOS5_CLKSRC_MASK_FSYS		EXYNOS_CLKREG(0x10340)
-#define EXYNOS5_CLKSRC_MASK_PERIC0		EXYNOS_CLKREG(0x10350)
-#define EXYNOS5_CLKSRC_MASK_PERIC1		EXYNOS_CLKREG(0x10354)
-
-#define EXYNOS5_CLKDIV_TOP0			EXYNOS_CLKREG(0x10510)
-#define EXYNOS5_CLKDIV_TOP1			EXYNOS_CLKREG(0x10514)
-#define EXYNOS5_CLKDIV_GSCL			EXYNOS_CLKREG(0x10520)
-#define EXYNOS5_CLKDIV_DISP1_0			EXYNOS_CLKREG(0x1052C)
-#define EXYNOS5_CLKDIV_GEN			EXYNOS_CLKREG(0x1053C)
-#define EXYNOS5_CLKDIV_MAUDIO			EXYNOS_CLKREG(0x10544)
-#define EXYNOS5_CLKDIV_FSYS0			EXYNOS_CLKREG(0x10548)
-#define EXYNOS5_CLKDIV_FSYS1			EXYNOS_CLKREG(0x1054C)
-#define EXYNOS5_CLKDIV_FSYS2			EXYNOS_CLKREG(0x10550)
-#define EXYNOS5_CLKDIV_FSYS3			EXYNOS_CLKREG(0x10554)
-#define EXYNOS5_CLKDIV_PERIC0			EXYNOS_CLKREG(0x10558)
-#define EXYNOS5_CLKDIV_PERIC1			EXYNOS_CLKREG(0x1055C)
-#define EXYNOS5_CLKDIV_PERIC2			EXYNOS_CLKREG(0x10560)
-#define EXYNOS5_CLKDIV_PERIC3			EXYNOS_CLKREG(0x10564)
-#define EXYNOS5_CLKDIV_PERIC4			EXYNOS_CLKREG(0x10568)
-#define EXYNOS5_CLKDIV_PERIC5			EXYNOS_CLKREG(0x1056C)
-#define EXYNOS5_SCLK_DIV_ISP			EXYNOS_CLKREG(0x10580)
-
-#define EXYNOS5_CLKGATE_IP_ACP			EXYNOS_CLKREG(0x08800)
-#define EXYNOS5_CLKGATE_IP_ISP0			EXYNOS_CLKREG(0x0C800)
-#define EXYNOS5_CLKGATE_IP_ISP1			EXYNOS_CLKREG(0x0C804)
-#define EXYNOS5_CLKGATE_IP_GSCL			EXYNOS_CLKREG(0x10920)
-#define EXYNOS5_CLKGATE_IP_DISP1		EXYNOS_CLKREG(0x10928)
-#define EXYNOS5_CLKGATE_IP_MFC			EXYNOS_CLKREG(0x1092C)
-#define EXYNOS5_CLKGATE_IP_G3D			EXYNOS_CLKREG(0x10930)
-#define EXYNOS5_CLKGATE_IP_GEN			EXYNOS_CLKREG(0x10934)
-#define EXYNOS5_CLKGATE_IP_FSYS			EXYNOS_CLKREG(0x10944)
-#define EXYNOS5_CLKGATE_IP_GPS			EXYNOS_CLKREG(0x1094C)
-#define EXYNOS5_CLKGATE_IP_PERIC		EXYNOS_CLKREG(0x10950)
-#define EXYNOS5_CLKGATE_IP_PERIS		EXYNOS_CLKREG(0x10960)
-#define EXYNOS5_CLKGATE_BLOCK			EXYNOS_CLKREG(0x10980)
-
-#define EXYNOS5_BPLL_CON0			EXYNOS_CLKREG(0x20110)
-#define EXYNOS5_CLKSRC_CDREX			EXYNOS_CLKREG(0x20200)
-#define EXYNOS5_CLKDIV_CDREX			EXYNOS_CLKREG(0x20500)
-
-#define EXYNOS5_PLL_DIV2_SEL			EXYNOS_CLKREG(0x20A24)
-
-#define EXYNOS5_EPLL_LOCK			EXYNOS_CLKREG(0x10030)
-
-#define EXYNOS5_EPLLCON0_LOCKED_SHIFT		(29)
-
-#define PWR_CTRL1_CORE2_DOWN_RATIO		(7 << 28)
-#define PWR_CTRL1_CORE1_DOWN_RATIO		(7 << 16)
-#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
-#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
-#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
-#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
-#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
-#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)
-
-#define PWR_CTRL2_DIV2_UP_EN			(1 << 25)
-#define PWR_CTRL2_DIV1_UP_EN			(1 << 24)
-#define PWR_CTRL2_DUR_STANDBY2_VAL		(1 << 16)
-#define PWR_CTRL2_DUR_STANDBY1_VAL		(1 << 8)
-#define PWR_CTRL2_CORE2_UP_RATIO		(1 << 4)
-#define PWR_CTRL2_CORE1_UP_RATIO		(1 << 0)
-
 /* Compatibility defines and inclusion */
 
 #include <mach/regs-pmu.h>

arch/arm/mach-exynos/include/mach/regs-mct.h

@@ -1,53 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x)		(S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U		EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT		EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L		EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U		EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR	EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON		EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT		EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK		(0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET		(0x00)
-#define MCT_L_ICNTB_OFFSET		(0x08)
-#define MCT_L_TCON_OFFSET		(0x20)
-#define MCT_L_INT_CSTAT_OFFSET		(0x30)
-#define MCT_L_INT_ENB_OFFSET		(0x34)
-#define MCT_L_WSTAT_OFFSET		(0x40)
-
-#define MCT_G_TCON_START		(1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC	(1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE		(1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE	(1 << 2)
-#define MCT_L_TCON_INT_START		(1 << 1)
-#define MCT_L_TCON_TIMER_START		(1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */

arch/arm/mach-exynos/mach-armlex4210.c

@@ -177,7 +177,6 @@ static void __init armlex4210_smsc911x_init(void)
 static void __init armlex4210_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(armlex4210_uartcfgs,
 			   ARRAY_SIZE(armlex4210_uartcfgs));
 }
@@ -202,6 +201,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.map_io		= armlex4210_map_io,
 	.init_machine	= armlex4210_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos4-dt.c

@@ -11,121 +11,26 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/of_fdt.h>
 #include <linux/serial_core.h>
+#include <linux/memblock.h>
+#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
+#include <plat/mfc.h>
 
 #include "common.h"
 
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the Exynos4 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
-				"exynos4210-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2,
-				"exynos4210-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3,
-				"exynos4210-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
-				"exynos4-sdhci.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
-				"exynos4-sdhci.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
-				"exynos4-sdhci.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
-				"exynos4-sdhci.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
-				"s3c2440-i2c.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
-				"s3c2440-i2c.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
-				"s3c2440-i2c.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
-				"s3c2440-i2c.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
-				"s3c2440-i2c.4", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
-				"s3c2440-i2c.5", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
-				"s3c2440-i2c.6", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
-				"s3c2440-i2c.7", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
-				"exynos4210-spi.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
-				"exynos4210-spi.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2,
-				"exynos4210-spi.2", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
-				"exynos-tmu", NULL),
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13620000,
-			"exynos-sysmmu.0", NULL), /* MFC_L */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13630000,
-			"exynos-sysmmu.1", NULL), /* MFC_R */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E20000,
-			"exynos-sysmmu.2", NULL), /* TV */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A60000,
-			"exynos-sysmmu.3", NULL), /* JPEG */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A30000,
-			"exynos-sysmmu.4", NULL), /* ROTATOR */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A20000,
-			"exynos-sysmmu.5", NULL), /* FIMC0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A30000,
-			"exynos-sysmmu.6", NULL), /* FIMC1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A40000,
-			"exynos-sysmmu.7", NULL), /* FIMC2 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A50000,
-			"exynos-sysmmu.8", NULL), /* FIMC3 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A20000,
-			"exynos-sysmmu.9", NULL), /* G2D(4210) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A40000,
-			"exynos-sysmmu.9", NULL), /* G2D(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11E20000,
-			"exynos-sysmmu.10", NULL), /* FIMD0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12220000,
-			"exynos-sysmmu.11", NULL), /* FIMD1(4210) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12260000,
-			"exynos-sysmmu.12", NULL), /* IS0(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x122B0000,
-			"exynos-sysmmu.13", NULL), /* IS1(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123B0000,
-			"exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000,
-			"exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */
-	{},
-};
-
 static void __init exynos4_dt_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
 }
 
 static void __init exynos4_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-				exynos4_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static char const *exynos4_dt_compat[] __initdata = {
@@ -135,6 +40,18 @@ static char const *exynos4_dt_compat[] __initdata = {
 	NULL
 };
 
+static void __init exynos4_reserve(void)
+{
+#ifdef CONFIG_S5P_DEV_MFC
+	struct s5p_mfc_dt_meminfo mfc_mem;
+
+	/* Reserve memory for MFC only if it's available */
+	mfc_mem.compatible = "samsung,mfc-v5";
+	if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+		s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+				mfc_mem.lsize);
+#endif
+}
 DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	.smp		= smp_ops(exynos_smp_ops),
@@ -142,7 +59,8 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.map_io		= exynos4_dt_map_io,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
+	.reserve	= exynos4_reserve,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -11,151 +11,21 @@
 
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/serial_core.h>
 #include <linux/memblock.h>
 #include <linux/io.h>
+#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
-#include <mach/map.h>
 #include <mach/regs-pmu.h>
 
 #include <plat/cpu.h>
-#include <plat/regs-serial.h>
 #include <plat/mfc.h>
 
 #include "common.h"
 
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the EXYNOS5 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
-				"exynos4210-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
-				"exynos4210-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
-				"exynos4210-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
-				"s3c2440-i2c.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
-				"s3c2440-i2c.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2),
-				"s3c2440-i2c.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3),
-				"s3c2440-i2c.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4),
-				"s3c2440-i2c.4", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5),
-				"s3c2440-i2c.5", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6),
-				"s3c2440-i2c.6", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7),
-				"s3c2440-i2c.7", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8),
-				"s3c2440-hdmiphy-i2c", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
-				"dw_mmc.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
-				"dw_mmc.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
-				"dw_mmc.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
-				"dw_mmc.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
-				"exynos4210-spi.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
-				"exynos4210-spi.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
-				"exynos4210-spi.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
-				"exynos5-sata", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
-				"exynos5-sata-phy", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
-				"exynos5-sata-phy-i2c", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
-				"exynos-gsc.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
-				"exynos-gsc.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
-				"exynos-gsc.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
-				"exynos-gsc.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000,
-				"exynos5-hdmi", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000,
-				"exynos5-mixer", NULL),
-	OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
-				"exynos-tmu", NULL),
-	OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000,
-				"samsung-i2s.0", NULL),
-	OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000,
-				"samsung-i2s.1", NULL),
-	OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000,
-				"samsung-i2s.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000,
-			"exynos-sysmmu.0", "mfc"), /* MFC_L */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000,
-			"exynos-sysmmu.1", "mfc"), /* MFC_R */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14650000,
-			"exynos-sysmmu.2", NULL), /* TV */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11F20000,
-			"exynos-sysmmu.3", "jpeg"), /* JPEG */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11D40000,
-			"exynos-sysmmu.4", NULL), /* ROTATOR */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E80000,
-			"exynos-sysmmu.5", "gscl"), /* GSCL0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E90000,
-			"exynos-sysmmu.6", "gscl"), /* GSCL1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EA0000,
-			"exynos-sysmmu.7", "gscl"), /* GSCL2 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EB0000,
-			"exynos-sysmmu.8", "gscl"), /* GSCL3 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13260000,
-			"exynos-sysmmu.9", NULL), /* FIMC-IS0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x132C0000,
-			"exynos-sysmmu.10", NULL), /* FIMC-IS1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14640000,
-			"exynos-sysmmu.11", NULL), /* FIMD1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C40000,
-			"exynos-sysmmu.12", NULL), /* FIMC-LITE0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C50000,
-			"exynos-sysmmu.13", NULL), /* FIMC-LITE1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000,
-			"exynos-sysmmu.14", NULL), /* G2D */
-	{},
-};
-
-static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	{},
-};
-
 static void __init exynos5_dt_map_io(void)
 {
-	unsigned long root = of_get_flat_dt_root();
-
 	exynos_init_io(NULL, 0);
-
-	if (of_flat_dt_is_compatible(root, "samsung,exynos5250"))
-		s3c24xx_init_clocks(24000000);
 }
 
 static void __init exynos5_dt_machine_init(void)
@@ -182,12 +52,7 @@ static void __init exynos5_dt_machine_init(void)
 		}
 	}
 
-	if (of_machine_is_compatible("samsung,exynos5250"))
-		of_platform_populate(NULL, of_default_bus_match_table,
-				     exynos5250_auxdata_lookup, NULL);
-	else if (of_machine_is_compatible("samsung,exynos5440"))
-		of_platform_populate(NULL, of_default_bus_match_table,
-				     exynos5440_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static char const *exynos5_dt_compat[] __initdata = {
@@ -216,7 +81,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos5_dt_map_io,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,

arch/arm/mach-exynos/mach-nuri.c

@@ -1330,8 +1330,9 @@ static struct platform_device *nuri_devices[] __initdata = {
 static void __init nuri_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
+	xxti_f = 0;
+	xusbxti_f = 24000000;
 }
 
 static void __init nuri_reserve(void)
@@ -1380,7 +1381,7 @@ MACHINE_START(NURI, "NURI")
 	.map_io		= nuri_map_io,
 	.init_machine	= nuri_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.reserve        = &nuri_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-origen.c

@@ -754,8 +754,9 @@ static void s5p_tv_setup(void)
 static void __init origen_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+	xxti_f = 0;
+	xusbxti_f = 24000000;
 }
 
 static void __init origen_power_init(void)
@@ -815,7 +816,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.map_io		= origen_map_io,
 	.init_machine	= origen_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.reserve	= &origen_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -322,7 +322,6 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
 static void __init smdk4x12_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
 }
 
@@ -376,7 +375,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
 	.init_machine	= smdk4x12_machine_init,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.restart	= exynos4_restart,
 	.reserve	= &smdk4x12_reserve,
 MACHINE_END
@@ -390,7 +389,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.map_io		= smdk4x12_map_io,
 	.init_machine	= smdk4x12_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.restart	= exynos4_restart,
 	.reserve	= &smdk4x12_reserve,
 MACHINE_END

arch/arm/mach-exynos/mach-smdkv310.c

@@ -371,8 +371,9 @@ static void s5p_tv_setup(void)
 static void __init smdkv310_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
+	xxti_f = 12000000;
+	xusbxti_f = 24000000;
 }
 
 static void __init smdkv310_reserve(void)
@@ -423,7 +424,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
@@ -436,7 +437,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-universal_c210.c

@@ -41,7 +41,7 @@
 #include <plat/mfc.h>
 #include <plat/sdhci.h>
 #include <plat/fimc-core.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
 #include <plat/camport.h>
 
 #include <mach/map.h>
@@ -1092,9 +1092,10 @@ static struct platform_device *universal_devices[] __initdata = {
 static void __init universal_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
-	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
+	samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
+	xxti_f = 0;
+	xusbxti_f = 24000000;
 }
 
 static void s5p_tv_setup(void)
@@ -1152,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.init_machine	= universal_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= s5p_timer_init,
+	.init_time	= samsung_timer_init,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/Kconfig

@@ -30,6 +30,7 @@ config CPU_S3C2410
 	select S3C2410_CLOCK
 	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
 	select S3C2410_PM if PM
+	select SAMSUNG_HRT
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -41,6 +42,7 @@ config CPU_S3C2412
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
+	select SAMSUNG_HRT
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -53,6 +55,7 @@ config CPU_S3C2416
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
+	select SAMSUNG_HRT
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -63,6 +66,7 @@ config CPU_S3C2440
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
+	select SAMSUNG_HRT
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
@@ -72,6 +76,7 @@ config CPU_S3C2442
 	select CPU_LLSERIAL_S3C2440
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
+	select SAMSUNG_HRT
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
 
@@ -87,6 +92,7 @@ config CPU_S3C2443
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
+	select SAMSUNG_HRT
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 

arch/arm/mach-s3c24xx/bast-irq.c

@@ -34,8 +34,6 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
-#include <plat/irq.h>
-
 #include "bast.h"
 
 #define irqdbf(x...)

arch/arm/mach-s3c24xx/clock-s3c2410.c

@@ -40,7 +40,6 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c2410.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
 

arch/arm/mach-s3c24xx/clock-s3c2412.c

@@ -41,7 +41,6 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c2412.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
 

arch/arm/mach-s3c24xx/clock-s3c2416.c

@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 
-#include <plat/s3c2416.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/clock-s3c2443.c

@@ -41,7 +41,6 @@
 
 #include <plat/cpu-freq.h>
 
-#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/common-smdk.c

@@ -41,11 +41,12 @@
 
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 
-#include <plat/common-smdk.h>
 #include <plat/gpio-cfg.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 
+#include "common-smdk.h"
+
 /* LED devices */
 
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {

arch/arm/plat-samsung/include/plat/common-smdk.h → arch/arm/mach-s3c24xx/common-smdk.h

@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
- *
+/*
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/mach-s3c24xx/common.c

@@ -47,14 +47,11 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
-#include <plat/s3c2416.h>
-#include <plat/s3c244x.h>
-#include <plat/s3c2443.h>
 #include <plat/cpu-freq.h>
 #include <plat/pll.h>
 
+#include "common.h"
+
 /* table of supported CPUs */
 
 static const char name_s3c2410[]  = "S3C2410";

arch/arm/mach-s3c24xx/common.h

@@ -12,8 +12,94 @@
 #ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
 #define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
 
-void s3c2410_restart(char mode, const char *cmd);
-void s3c244x_restart(char mode, const char *cmd);
+struct s3c2410_uartcfg;
+
+#ifdef CONFIG_CPU_S3C2410
+extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
+extern void s3c2410_map_io(void);
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2410_init_clocks(int xtal);
+extern void s3c2410_restart(char mode, const char *cmd);
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+extern  int s3c2412_init(void);
+extern void s3c2412_map_io(void);
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2412_init_clocks(int xtal);
+extern  int s3c2412_baseclk_add(void);
+extern void s3c2412_restart(char mode, const char *cmd);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+extern  int s3c2416_init(void);
+extern void s3c2416_map_io(void);
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2416_init_clocks(int xtal);
+extern  int s3c2416_baseclk_add(void);
+extern void s3c2416_restart(char mode, const char *cmd);
+extern void s3c2416_init_irq(void);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+extern void s3c244x_map_io(void);
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c244x_init_clocks(int xtal);
+extern void s3c244x_restart(char mode, const char *cmd);
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+extern void s3c2440_map_io(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+extern void s3c2442_map_io(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+extern  int s3c2443_init(void);
+extern void s3c2443_map_io(void);
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2443_init_clocks(int xtal);
+extern  int s3c2443_baseclk_add(void);
+extern void s3c2443_restart(char mode, const char *cmd);
+extern void s3c2443_init_irq(void);
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
 
 extern struct syscore_ops s3c24xx_irq_syscore_ops;
 

arch/arm/mach-s3c24xx/dma-s3c2410.c

@@ -28,7 +28,6 @@
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 

arch/arm/mach-s3c24xx/dma-s3c2412.c

@@ -28,7 +28,6 @@
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 

arch/arm/mach-s3c24xx/dma-s3c2440.c

@@ -28,7 +28,6 @@
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 

arch/arm/mach-s3c24xx/dma-s3c2443.c

@@ -28,7 +28,6 @@
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 

arch/arm/mach-s3c24xx/include/mach/regs-sdi.h

@@ -1,127 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON                (0x00)
-#define S3C2410_SDIPRE                (0x04)
-#define S3C2410_SDICMDARG             (0x08)
-#define S3C2410_SDICMDCON             (0x0C)
-#define S3C2410_SDICMDSTAT            (0x10)
-#define S3C2410_SDIRSP0               (0x14)
-#define S3C2410_SDIRSP1               (0x18)
-#define S3C2410_SDIRSP2               (0x1C)
-#define S3C2410_SDIRSP3               (0x20)
-#define S3C2410_SDITIMER              (0x24)
-#define S3C2410_SDIBSIZE              (0x28)
-#define S3C2410_SDIDCON               (0x2C)
-#define S3C2410_SDIDCNT               (0x30)
-#define S3C2410_SDIDSTA               (0x34)
-#define S3C2410_SDIFSTA               (0x38)
-
-#define S3C2410_SDIDATA               (0x3C)
-#define S3C2410_SDIIMSK               (0x40)
-
-#define S3C2440_SDIDATA               (0x40)
-#define S3C2440_SDIIMSK               (0x3C)
-
-#define S3C2440_SDICON_SDRESET        (1<<8)
-#define S3C2440_SDICON_MMCCLOCK       (1<<5)
-#define S3C2410_SDICON_BYTEORDER      (1<<4)
-#define S3C2410_SDICON_SDIOIRQ        (1<<3)
-#define S3C2410_SDICON_RWAITEN        (1<<2)
-#define S3C2410_SDICON_FIFORESET      (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE      (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT       (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA    (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP     (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP     (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART    (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST  (1<<6)
-#define S3C2410_SDICMDCON_INDEX       (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN     (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING    (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX      (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE       (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD   (1<<22)
-#define S3C2440_SDIDCON_DS_WORD       (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD  (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE     (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS       (1<<16)
-#define S3C2410_SDIDCON_DMAEN         (1<<15)
-#define S3C2410_SDIDCON_STOP          (1<<14)
-#define S3C2440_SDIDCON_DATSTART      (1<<14)
-#define S3C2410_SDIDCON_DATMODE	      (3<<12)
-#define S3C2410_SDIDCON_BLKNUM        (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY    (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK   (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL      (1<<8)	/* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL       (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL     (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT   (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH    (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH    (1<<3)
-#define S3C2410_SDIDSTA_SBITERR       (1<<2)	/* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON      (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON      (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET      (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL       (3<<14)  /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET          (1<<13)
-#define S3C2410_SDIFSTA_RFDET          (1<<12)
-#define S3C2410_SDIFSTA_TFHALF         (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY        (1<<10)
-#define S3C2410_SDIFSTA_RFLAST         (1<<9)
-#define S3C2410_SDIFSTA_RFFULL         (1<<8)
-#define S3C2410_SDIFSTA_RFHALF         (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK      (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC    (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT        (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT     (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND     (1<<14)
-#define S3C2410_SDIIMSK_READWAIT       (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ        (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL       (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS      (1<<10)
-#define S3C2410_SDIIMSK_DATACRC        (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT    (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH     (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH     (1<<6)
-#define S3C2410_SDIIMSK_SBITERR        (1<<5)	/* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF     (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY    (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST     (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL     (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF     (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */

arch/arm/mach-s3c24xx/irq-pm.c

@@ -16,10 +16,15 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/syscore_ops.h>
+#include <linux/io.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/irq.h>
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/irq.h>
 

arch/arm/mach-s3c24xx/irq.c

@@ -34,7 +34,6 @@
 #include <plat/cpu.h>
 #include <plat/regs-irqtype.h>
 #include <plat/pm.h>
-#include <plat/irq.h>
 
 #define S3C_IRQTYPE_NONE	0
 #define S3C_IRQTYPE_EINT	1
@@ -175,8 +174,7 @@ static int s3c_irqext_type_set(void __iomem *gpcon_reg,
 	return 0;
 }
 
-/* FIXME: make static when it's out of plat-samsung/irq.h */
-int s3c_irqext_type(struct irq_data *data, unsigned int type)
+static int s3c_irqext_type(struct irq_data *data, unsigned int type)
 {
 	void __iomem *extint_reg;
 	void __iomem *gpcon_reg;
@@ -224,7 +222,7 @@ static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
 				   extint_offset, type);
 }
 
-struct irq_chip s3c_irq_chip = {
+static struct irq_chip s3c_irq_chip = {
 	.name		= "s3c",
 	.irq_ack	= s3c_irq_ack,
 	.irq_mask	= s3c_irq_mask,
@@ -232,7 +230,7 @@ struct irq_chip s3c_irq_chip = {
 	.irq_set_wake	= s3c_irq_wake
 };
 
-struct irq_chip s3c_irq_level_chip = {
+static struct irq_chip s3c_irq_level_chip = {
 	.name		= "s3c-level",
 	.irq_mask	= s3c_irq_mask,
 	.irq_unmask	= s3c_irq_unmask,

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -63,6 +63,8 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 
+#include <plat/samsung-time.h>
+
 #include "common.h"
 
 static struct resource amlm5900_nor_resource =
@@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void)
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 #ifdef CONFIG_FB_S3C2410
@@ -237,6 +240,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= amlm5900_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/samsung-time.h>
 
 #include "anubis.h"
 #include "common.h"
@@ -410,6 +411,7 @@ static void __init anubis_map_io(void)
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	/* check for the newer revision boards with large page nand */
 
@@ -444,6 +446,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -48,6 +48,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/mmc-s3cmci.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 
@@ -192,6 +193,7 @@ static void __init at2440evb_map_io(void)
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
 	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init at2440evb_init(void)
@@ -210,6 +212,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-bast.c

@@ -55,6 +55,7 @@
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "bast.h"
 #include "common.h"
@@ -576,6 +577,7 @@ static void __init bast_map_io(void)
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init bast_init(void)
@@ -605,6 +607,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= bast_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -81,6 +81,7 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pm.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "gta02.h"
@@ -501,6 +502,7 @@ static void __init gta02_map_io(void)
 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 
@@ -589,6 +591,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -62,7 +62,7 @@
 #include <plat/pll.h>
 #include <plat/pm.h>
 #include <plat/regs-serial.h>
-
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "h1940.h"
@@ -646,6 +646,7 @@ static void __init h1940_map_io(void)
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	/* setup PM */
 
@@ -741,6 +742,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.reserve	= h1940_reserve,
 	.init_irq	= h1940_init_irq,
 	.init_machine	= h1940_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-jive.c

@@ -46,14 +46,15 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/s3c2412.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
 
+#include "common.h"
 #include "s3c2412-power.h"
 
 static struct map_desc jive_iodesc[] __initdata = {
@@ -506,6 +507,7 @@ static void __init jive_map_io(void)
 	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void jive_power_off(void)
@@ -661,6 +663,6 @@ MACHINE_START(JIVE, "JIVE")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -56,6 +56,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
 #include <sound/s3c24xx_uda134x.h>
 
@@ -525,6 +526,7 @@ static void __init mini2440_map_io(void)
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 /*
@@ -687,6 +689,6 @@ MACHINE_START(MINI2440, "MINI2440")
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-n30.c

@@ -48,8 +48,8 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <linux/platform_data/mmc-s3cmci.h>
-#include <plat/s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 
@@ -536,6 +536,7 @@ static void __init n30_map_io(void)
 	n30_hwinit();
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
@@ -589,7 +590,7 @@ MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
@@ -600,7 +601,7 @@ MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -41,11 +41,10 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 
@@ -137,6 +136,7 @@ static void __init nexcoder_map_io(void)
 	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	nexcoder_sensorboard_init();
 }
@@ -153,6 +153,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -45,6 +45,7 @@
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
@@ -384,6 +385,7 @@ static void __init osiris_map_io(void)
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	/* check for the newer revision boards with large page nand */
 
@@ -426,6 +428,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-otom.c

@@ -33,7 +33,7 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "otom.h"
@@ -102,6 +102,7 @@ static void __init otom11_map_io(void)
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init otom11_init(void)
@@ -116,6 +117,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -55,13 +55,14 @@
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/common-smdk.h>
 #include <plat/gpio-cfg.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
+#include "common-smdk.h"
 
 static struct map_desc qt2410_iodesc[] __initdata = {
 	{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
@@ -304,6 +305,7 @@ static void __init qt2410_map_io(void)
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
 	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init qt2410_machine_init(void)
@@ -343,6 +345,6 @@ MACHINE_START(QT2410, "QT2410")
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -58,6 +58,7 @@
 #include <plat/pm.h>
 #include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "h1940.h"
@@ -741,6 +742,7 @@ static void __init rx1950_map_io(void)
 	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	/* setup PM */
 
@@ -813,6 +815,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 #include "h1940.h"
@@ -179,6 +180,7 @@ static void __init rx3715_map_io(void)
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 /* H1940 and RX3715 need to reserve this for suspend */
@@ -212,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.reserve	= rx3715_reserve,
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2410.c

@@ -51,10 +51,10 @@
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
+#include "common-smdk.h"
 
 static struct map_desc smdk2410_iodesc[] __initdata = {
   /* nothing here yet */
@@ -101,6 +101,7 @@ static void __init smdk2410_map_io(void)
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2410_init(void)
@@ -117,6 +118,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= smdk2410_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -41,13 +41,13 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
 
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
 
 static struct map_desc smdk2413_iodesc[] __initdata = {
 };
@@ -106,6 +106,7 @@ static void __init smdk2413_map_io(void)
 	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2413_machine_init(void)
@@ -132,7 +133,7 @@ MACHINE_START(S3C2413, "S3C2413")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
 
@@ -144,7 +145,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
 
@@ -156,6 +157,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -42,7 +42,6 @@
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/s3c2416.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
@@ -51,10 +50,12 @@
 #include <plat/sdhci.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/s3c-hsudc.h>
+#include <plat/samsung-time.h>
 
 #include <plat/fb.h>
 
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
 
 static struct map_desc smdk2416_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
@@ -221,6 +222,7 @@ static void __init smdk2416_map_io(void)
 	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2416_machine_init(void)
@@ -253,6 +255,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2416_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -38,15 +38,13 @@
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
+#include "common-smdk.h"
 
 static struct map_desc smdk2440_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
@@ -163,6 +161,7 @@ static void __init smdk2440_map_io(void)
 	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
 	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2440_machine_init(void)
@@ -181,6 +180,6 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -38,13 +38,13 @@
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/s3c2410.h>
-#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
 
 static struct map_desc smdk2443_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
@@ -122,6 +122,7 @@ static void __init smdk2443_map_io(void)
 	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init smdk2443_machine_init(void)
@@ -143,6 +144,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2443_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-tct_hammer.c

@@ -53,6 +53,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
 
 #include "common.h"
 
@@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void)
 	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init tct_hammer_init(void)
@@ -149,6 +151,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= tct_hammer_init,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -45,6 +45,7 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
 
 #include "bast.h"
 #include "common.h"
@@ -332,6 +333,7 @@ static void __init vr1000_map_io(void)
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init vr1000_init(void)
@@ -354,6 +356,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c24xx_init_irq,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vstms.c

@@ -41,12 +41,12 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/samsung-time.h>
 
+#include "common.h"
 
 static struct map_desc vstms_iodesc[] __initdata = {
 };
@@ -143,6 +143,7 @@ static void __init vstms_map_io(void)
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
 static void __init vstms_init(void)
@@ -160,6 +161,6 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
-	.init_time	= s3c24xx_timer_init,
+	.init_time	= samsung_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/pm-s3c2412.c

@@ -29,7 +29,6 @@
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/s3c2412.h>
 
 #include "regs-dsc.h"
 #include "s3c2412-power.h"

arch/arm/mach-s3c24xx/s3c2410.c

@@ -37,7 +37,6 @@
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 
-#include <plat/s3c2410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>

arch/arm/mach-s3c24xx/s3c2412.c

@@ -44,7 +44,6 @@
 #include <plat/pm.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
-#include <plat/s3c2412.h>
 
 #include "common.h"
 #include "regs-dsc.h"

arch/arm/mach-s3c24xx/s3c2416.c

@@ -50,7 +50,6 @@
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2416.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/sdhci.h>

arch/arm/mach-s3c24xx/s3c2440.c

@@ -33,7 +33,6 @@
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/s3c244x.h>
 #include <plat/pm.h>
 
 #include <plat/gpio-core.h>

arch/arm/mach-s3c24xx/s3c2442.c

@@ -44,7 +44,6 @@
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
-#include <plat/s3c244x.h>
 #include <plat/pm.h>
 
 #include <plat/gpio-core.h>

arch/arm/mach-s3c24xx/s3c2443.c

@@ -36,7 +36,6 @@
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2443.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb-core.h>

arch/arm/mach-s3c24xx/s3c244x.c

@@ -37,8 +37,6 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>