i2c-pnx: Fix interrupt handler, get rid of EARLY config option

This fixes two issues raised by David Brownell on the i2c list:

<< Someone needs to update i2c-pnx.c to handle the IRQ handler doesn't
expect pt_regs (gone now for a while), and so it doesn't try to
reference "mudule_init()" if I2C isn't initialized "early".  For
that matter, to get rid of that _option_ to initialize then, and
always init that driver with subsystem_init() ... it's common with
embedded systems to need I2C access to tweak a GPIO expander or
do some other work when bringing up drivers, that's not specific
to USB stacks. >>

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/i2c/busses/Kconfig

@@ -564,13 +564,4 @@ config I2C_PNX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pnx.
 
-config I2C_PNX_EARLY
-	bool "Early initialization for I2C on PNXxxxx"
-	depends on I2C_PNX=y
-	help
-	  Under certain circumstances one may need to make sure I2C on PNXxxxx
-	  is initialized earlier than some other driver that depends on it
-	  (for instance, that might be USB in case of PNX4008). With this
-	  option turned on you can guarantee that.
-
 endmenu

drivers/i2c/busses/i2c-pnx.c

@@ -305,8 +305,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
 	return 0;
 }
 
-static irqreturn_t
-i2c_pnx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 {
 	u32 stat, ctl;
 	struct i2c_adapter *adap = dev_id;
@@ -699,10 +698,6 @@ MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>");
 MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_I2C_PNX_EARLY
 /* We need to make sure I2C is initialized before USB */
 subsys_initcall(i2c_adap_pnx_init);
-#else
-mudule_init(i2c_adap_pnx_init);
-#endif
 module_exit(i2c_adap_pnx_exit);