[media] rc: rename the remaining things to rc_core

The Remote Controller subsystem is meant to be used not only by Infra Red
but also for similar types of Remote Controllers. The core is not specific
to Infra Red. As such, rename:
	- ir-core.h to rc-core.h
	- IR_CORE to RC_CORE
	- namespace inside rc-core.c/rc-core.h

To be consistent with the other changes.

No functional change on this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dm1105/Kconfig

@@ -8,7 +8,7 @@ config DVB_DM1105
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_SI21XX if !DVB_FE_CUSTOMISE
 	select DVB_DS3000 if !DVB_FE_CUSTOMISE
-	depends on IR_CORE
+	depends on RC_CORE
 	help
 	  Support for cards based on the SDMC DM1105 PCI chip like
 	  DvbWorld 2002

drivers/media/dvb/dm1105/dm1105.c

@@ -27,7 +27,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "demux.h"
 #include "dmxdev.h"

drivers/media/dvb/dvb-usb/Kconfig

@@ -1,6 +1,6 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
-	depends on DVB_CORE && USB && I2C && IR_CORE
+	depends on DVB_CORE && USB && I2C && RC_CORE
 	help
 	  By enabling this you will be able to choose the various supported
 	  USB1.1 and USB2.0 DVB devices.

drivers/media/dvb/dvb-usb/dvb-usb.h

@@ -14,7 +14,7 @@
 #include <linux/usb.h>
 #include <linux/firmware.h>
 #include <linux/mutex.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "dvb_frontend.h"
 #include "dvb_demux.h"

drivers/media/dvb/dvb-usb/lmedm04.c

@@ -61,7 +61,7 @@
 #define DVB_USB_LOG_PREFIX "LME2510(C)"
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "dvb-usb.h"
 #include "lmedm04.h"

drivers/media/dvb/mantis/Kconfig

@@ -1,6 +1,6 @@
 config MANTIS_CORE
 	tristate "Mantis/Hopper PCI bridge based devices"
-	depends on PCI && I2C && INPUT && IR_CORE
+	depends on PCI && I2C && INPUT && RC_CORE
 
 	help
 	  Support for PCI cards based on the Mantis and Hopper PCi bridge.

drivers/media/dvb/mantis/mantis_input.c

@@ -18,7 +18,7 @@
 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <linux/pci.h>
 
 #include "dmxdev.h"

drivers/media/dvb/siano/Kconfig

@@ -4,7 +4,7 @@
 
 config SMS_SIANO_MDTV
 	tristate "Siano SMS1xxx based MDTV receiver"
-	depends on DVB_CORE && IR_CORE && HAS_DMA
+	depends on DVB_CORE && RC_CORE && HAS_DMA
 	---help---
 	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
 

drivers/media/dvb/siano/smsir.h

@@ -28,7 +28,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define __SMS_IR_H__
 
 #include <linux/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define IR_DEFAULT_TIMEOUT		100
 

drivers/media/dvb/ttpci/Kconfig

@@ -97,7 +97,7 @@ config DVB_BUDGET_CI
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
-	depends on IR_CORE
+	depends on RC_CORE
 	help
 	  Support for simple SAA7146 based DVB cards
 	  (so called Budget- or Nova-PCI cards) without onboard

drivers/media/dvb/ttpci/budget-ci.c

@@ -34,7 +34,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "budget.h"
 

drivers/media/rc/Kconfig

@@ -1,16 +1,17 @@
-menuconfig IR_CORE
-	tristate "Infrared remote controller adapters"
+menuconfig RC_CORE
+	tristate "Remote Controller adapters"
 	depends on INPUT
 	default INPUT
 	---help---
 	  Enable support for Remote Controllers on Linux. This is
 	  needed in order to support several video capture adapters.
+	  Currently, all supported devices use InfraRed.
 
 	  Enable this option if you have a video capture board even
 	  if you don't need IR, as otherwise, you may not be able to
 	  compile the driver for your adapter.
 
-if IR_CORE
+if RC_CORE
 
 config LIRC
 	tristate
@@ -27,7 +28,7 @@ source "drivers/media/rc/keymaps/Kconfig"
 
 config IR_NEC_DECODER
 	tristate "Enable IR raw decoder for the NEC protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -37,7 +38,7 @@ config IR_NEC_DECODER
 
 config IR_RC5_DECODER
 	tristate "Enable IR raw decoder for the RC-5 protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -47,7 +48,7 @@ config IR_RC5_DECODER
 
 config IR_RC6_DECODER
 	tristate "Enable IR raw decoder for the RC6 protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -57,7 +58,7 @@ config IR_RC6_DECODER
 
 config IR_JVC_DECODER
 	tristate "Enable IR raw decoder for the JVC protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -67,7 +68,7 @@ config IR_JVC_DECODER
 
 config IR_SONY_DECODER
 	tristate "Enable IR raw decoder for the Sony protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	default y
 
 	---help---
@@ -76,7 +77,7 @@ config IR_SONY_DECODER
 
 config IR_RC5_SZ_DECODER
 	tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -88,7 +89,7 @@ config IR_RC5_SZ_DECODER
 
 config IR_LIRC_CODEC
 	tristate "Enable IR to LIRC bridge"
-	depends on IR_CORE
+	depends on RC_CORE
 	depends on LIRC
 	default y
 
@@ -99,7 +100,7 @@ config IR_LIRC_CODEC
 config IR_ENE
 	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 	depends on PNP
-	depends on IR_CORE
+	depends on RC_CORE
 	---help---
 	   Say Y here to enable support for integrated infrared receiver
 	   /transceiver made by ENE.
@@ -113,7 +114,7 @@ config IR_ENE
 config IR_IMON
 	tristate "SoundGraph iMON Receiver and Display"
 	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
+	depends on RC_CORE
 	select USB
 	---help---
 	   Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
@@ -125,7 +126,7 @@ config IR_IMON
 config IR_MCEUSB
 	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
 	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
+	depends on RC_CORE
 	select USB
 	---help---
 	   Say Y here if you want to use a Windows Media Center Edition
@@ -137,7 +138,7 @@ config IR_MCEUSB
 config IR_NUVOTON
 	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 	depends on PNP
-	depends on IR_CORE
+	depends on RC_CORE
 	---help---
 	   Say Y here to enable support for integrated infrared receiver
 	   /transciever made by Nuvoton (formerly Winbond). This chip is
@@ -150,7 +151,7 @@ config IR_NUVOTON
 config IR_STREAMZAP
 	tristate "Streamzap PC Remote IR Receiver"
 	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
+	depends on RC_CORE
 	select USB
 	---help---
 	   Say Y here if you want to use a Streamzap PC Remote
@@ -162,7 +163,7 @@ config IR_STREAMZAP
 config IR_WINBOND_CIR
         tristate "Winbond IR remote control"
         depends on X86 && PNP
-	depends on IR_CORE
+	depends on RC_CORE
         select NEW_LEDS
         select LEDS_CLASS
         select LEDS_TRIGGERS
@@ -176,4 +177,4 @@ config IR_WINBOND_CIR
            To compile this driver as a module, choose M here: the module will
 	   be called winbond_cir.
 
-endif #IR_CORE
+endif #RC_CORE

drivers/media/rc/Makefile

@@ -2,7 +2,7 @@ rc-core-objs	:= rc-main.o rc-raw.o
 
 obj-y += keymaps/
 
-obj-$(CONFIG_IR_CORE) += rc-core.o
+obj-$(CONFIG_RC_CORE) += rc-core.o
 obj-$(CONFIG_LIRC) += lirc_dev.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
 obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o

drivers/media/rc/ene_ir.c

@@ -37,7 +37,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include "ene_ir.h"
 
 static int sample_period;

drivers/media/rc/imon.c

@@ -38,7 +38,7 @@
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include <linux/time.h>
 #include <linux/timer.h>

drivers/media/rc/ir-lirc-codec.c

@@ -16,7 +16,7 @@
 #include <linux/wait.h>
 #include <media/lirc.h>
 #include <media/lirc_dev.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include "rc-core-priv.h"
 
 #define LIRCBUF_SIZE 256

drivers/media/rc/keymaps/Kconfig

@@ -1,6 +1,6 @@
 config RC_MAP
 	tristate "Compile Remote Controller keymap modules"
-	depends on IR_CORE
+	depends on RC_CORE
 	default y
 
 	---help---

drivers/media/rc/keymaps/rc-lirc.c

@@ -9,7 +9,7 @@
  * (at your option) any later version.
  */
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 static struct ir_scancode lirc[] = {
 	{ },

drivers/media/rc/mceusb.c

@@ -37,7 +37,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define DRIVER_VERSION	"1.91"
 #define DRIVER_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"

drivers/media/rc/nuvoton-cir.c

@@ -32,7 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <linux/pci_ids.h>
 
 #include "nuvoton-cir.h"

drivers/media/rc/rc-core-priv.h

@@ -18,7 +18,7 @@
 
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 struct ir_raw_handler {
 	struct list_head list;

drivers/media/rc/rc-main.c

@@ -12,7 +12,7 @@
  *  GNU General Public License for more details.
  */
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <linux/spinlock.h>
 #include <linux/delay.h>
 #include <linux/input.h>
@@ -1103,11 +1103,11 @@ EXPORT_SYMBOL_GPL(rc_unregister_device);
  * Init/exit code for the module. Basically, creates/removes /sys/class/rc
  */
 
-static int __init ir_core_init(void)
+static int __init rc_core_init(void)
 {
 	int rc = class_register(&ir_input_class);
 	if (rc) {
-		printk(KERN_ERR "ir_core: unable to register rc class\n");
+		printk(KERN_ERR "rc_core: unable to register rc class\n");
 		return rc;
 	}
 
@@ -1118,18 +1118,18 @@ static int __init ir_core_init(void)
 	return 0;
 }
 
-static void __exit ir_core_exit(void)
+static void __exit rc_core_exit(void)
 {
 	class_unregister(&ir_input_class);
 	ir_unregister_map(&empty_map);
 }
 
-module_init(ir_core_init);
-module_exit(ir_core_exit);
+module_init(rc_core_init);
+module_exit(rc_core_exit);
 
-int ir_core_debug;    /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
+int rc_core_debug;    /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(rc_core_debug);
+module_param_named(debug, rc_core_debug, int, 0644);
 
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
 MODULE_LICENSE("GPL");

drivers/media/rc/rc-raw.c

@@ -357,7 +357,7 @@ static void init_decoders(struct work_struct *work)
 	load_lirc_codec();
 
 	/* If needed, we may later add some init code. In this case,
-	   it is needed to change the CONFIG_MODULE test at ir-core.h
+	   it is needed to change the CONFIG_MODULE test at rc-core.h
 	 */
 }
 #endif

drivers/media/rc/streamzap.c

@@ -36,7 +36,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define DRIVER_VERSION	"1.61"
 #define DRIVER_NAME	"streamzap"

drivers/media/rc/winbond-cir.c

@@ -50,7 +50,7 @@
 #include <linux/io.h>
 #include <linux/bitrev.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define DRVNAME "winbond-cir"
 

drivers/media/video/Kconfig

@@ -96,7 +96,7 @@ config VIDEO_HELPER_CHIPS_AUTO
 
 config VIDEO_IR_I2C
 	tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
-	depends on I2C && IR_CORE
+	depends on I2C && RC_CORE
 	default y
 	---help---
 	  Most boards have an IR chip directly connected via GPIO. However,

drivers/media/video/bt8xx/Kconfig

@@ -4,7 +4,7 @@ config VIDEO_BT848
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO

drivers/media/video/bt8xx/bttvp.h

@@ -41,7 +41,7 @@
 #include <linux/device.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/tveeprom.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 
 #include "bt848.h"

drivers/media/video/cx18/Kconfig

@@ -2,7 +2,7 @@ config VIDEO_CX18
 	tristate "Conexant cx23418 MPEG encoder support"
 	depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
 	select I2C_ALGOBIT
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X

drivers/media/video/cx231xx/Kconfig

@@ -3,7 +3,7 @@ config VIDEO_CX231XX
 	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_CX25840
 	select VIDEO_CX2341X
@@ -16,7 +16,7 @@ config VIDEO_CX231XX
 
 config VIDEO_CX231XX_RC
 	bool "Conexant cx231xx Remote Controller additional support"
-	depends on IR_CORE
+	depends on RC_CORE
 	depends on VIDEO_CX231XX
 	default y
 	---help---

drivers/media/video/cx231xx/cx231xx.h

@@ -34,7 +34,7 @@
 
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-device.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dvb.h>
 

drivers/media/video/cx23885/Kconfig

@@ -5,7 +5,7 @@ config VIDEO_CX23885
 	select VIDEO_BTCX
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_DVB
 	select VIDEOBUF_DMA_SG
 	select VIDEO_CX25840

drivers/media/video/cx23885/cx23885-input.c

@@ -36,7 +36,7 @@
  */
 
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/v4l2-subdev.h>
 
 #include "cx23885.h"

drivers/media/video/cx23885/cx23885.h

@@ -30,7 +30,7 @@
 #include <media/tveeprom.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/videobuf-dvb.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "btcx-risc.h"
 #include "cx23885-reg.h"

drivers/media/video/cx23885/cx23888-ir.c

@@ -26,7 +26,7 @@
 
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "cx23885.h"
 

drivers/media/video/cx25840/cx25840-ir.c

@@ -24,7 +24,7 @@
 #include <linux/slab.h>
 #include <linux/kfifo.h>
 #include <media/cx25840.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "cx25840-core.h"
 

drivers/media/video/cx88/Kconfig

@@ -1,6 +1,6 @@
 config VIDEO_CX88
 	tristate "Conexant 2388x (bt878 successor) support"
-	depends on VIDEO_DEV && PCI && I2C && IR_CORE
+	depends on VIDEO_DEV && PCI && I2C && RC_CORE
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG

drivers/media/video/cx88/cx88-input.c

@@ -29,7 +29,7 @@
 #include <linux/module.h>
 
 #include "cx88.h"
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define MODULE_NAME "cx88xx"
 

drivers/media/video/em28xx/Kconfig

@@ -3,7 +3,7 @@ config VIDEO_EM28XX
 	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO

drivers/media/video/em28xx/em28xx.h

@@ -33,7 +33,7 @@
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-device.h>
 #include <media/ir-kbd-i2c.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
 #include <media/videobuf-dvb.h>
 #endif

drivers/media/video/ir-kbd-i2c.c

@@ -46,7 +46,7 @@
 #include <linux/i2c.h>
 #include <linux/workqueue.h>
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 
 /* ----------------------------------------------------------------------- */

drivers/media/video/ivtv/Kconfig

@@ -2,7 +2,7 @@ config VIDEO_IVTV
 	tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
 	depends on VIDEO_V4L2 && PCI && I2C
 	select I2C_ALGOBIT
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X

drivers/media/video/saa7134/Kconfig

@@ -26,7 +26,7 @@ config VIDEO_SAA7134_ALSA
 
 config VIDEO_SAA7134_RC
 	bool "Philips SAA7134 Remote Controller support"
-	depends on IR_CORE
+	depends on RC_CORE
 	depends on VIDEO_SAA7134
 	default y
 	---help---

drivers/media/video/saa7134/saa7134.h

@@ -37,7 +37,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/tuner.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dma-sg.h>
 #include <sound/core.h>

drivers/media/video/tlg2300/Kconfig

@@ -3,7 +3,7 @@ config VIDEO_TLG2300
 	depends on VIDEO_DEV && I2C && SND && DVB_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select SND_PCM
 	select VIDEOBUF_DVB

drivers/staging/cx25821/Kconfig

@@ -5,7 +5,7 @@ config VIDEO_CX25821
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_DVB
 	select VIDEOBUF_DMA_SG
 	select VIDEO_CX25840

drivers/staging/go7007/Kconfig

@@ -4,7 +4,7 @@ config VIDEO_GO7007
 	depends on BKL # please fix
 	depends on SND
 	select VIDEOBUF_DMA_SG
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select SND_PCM

drivers/staging/tm6000/Kconfig

@@ -1,6 +1,6 @@
 config VIDEO_TM6000
 	tristate "TV Master TM5600/6000/6010 driver"
-	depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL
+	depends on VIDEO_DEV && I2C && INPUT && RC_CORE && USB && EXPERIMENTAL
 	select VIDEO_TUNER
 	select MEDIA_TUNER_XC2028
 	select MEDIA_TUNER_XC5000

drivers/staging/tm6000/tm6000-input.c

@@ -24,7 +24,7 @@
 #include <linux/input.h>
 #include <linux/usb.h>
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "tm6000.h"
 #include "tm6000-regs.h"

include/media/ir-kbd-i2c.h

@@ -1,7 +1,7 @@
 #ifndef _IR_I2C
 #define _IR_I2C
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define DEFAULT_POLLING_INTERVAL	100	/* ms */
 

include/media/ir-core.h → include/media/rc-core.h

@@ -22,8 +22,8 @@
 #include <linux/timer.h>
 #include <media/rc-map.h>
 
-extern int ir_core_debug;
-#define IR_dprintk(level, fmt, arg...)	if (ir_core_debug >= level) \
+extern int rc_core_debug;
+#define IR_dprintk(level, fmt, arg...)	if (rc_core_debug >= level) \
 	printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
 
 enum rc_driver_type {