Merge tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata fixes from Jeff Garzik:

1) Fix regression that could cause a misdiagnosis, which in turn could
   lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug
   and suspend/resume is involved.

2) Fix a regression that led to ata%d controller ids being numbered one
   larger than in <= 3.4-rc3 (oh, the horror!).  Controller ids should now be
   as expected.

3) add some DT, PCI id's

4) ata/pata_arasan_cf: minor cpp fixing/cleaning

* tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
  ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  libata: init ata_print_id to 0
  ahci: Detect Marvell 88SE9172 SATA controller
  libata: skip old error history when counting probe trials

Documentation/devicetree/bindings/ata/calxeda-sata.txt → Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -1,10 +1,10 @@
-* Calxeda SATA Controller
+* AHCI SATA Controller
 
 SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
+- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
@@ -14,4 +14,3 @@ Example:
                 reg = <0xffe08000 0x1000>;
                 interrupts = <115>;
         };
-

drivers/ata/ahci.c

@@ -394,6 +394,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9128 */
 	{ PCI_DEVICE(0x1b4b, 0x9125),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9125 */
+	{ PCI_DEVICE(0x1b4b, 0x917a),
+	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 */
 	{ PCI_DEVICE(0x1b4b, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 

drivers/ata/ahci_platform.c

@@ -280,6 +280,7 @@ static struct dev_pm_ops ahci_pm_ops = {
 
 static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "calxeda,hb-ahci", },
+	{ .compatible = "snps,spear-ahci", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);

drivers/ata/libata-core.c

@@ -95,7 +95,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
 static void ata_dev_xfermask(struct ata_device *dev);
 static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
 
-atomic_t ata_print_id = ATOMIC_INIT(1);
+atomic_t ata_print_id = ATOMIC_INIT(0);
 
 struct ata_force_param {
 	const char	*name;

drivers/ata/libata-eh.c

@@ -3501,7 +3501,8 @@ static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg
 	u64 now = get_jiffies_64();
 	int *trials = void_arg;
 
-	if (ent->timestamp < now - min(now, interval))
+	if ((ent->eflags & ATA_EFLAG_OLD_ER) ||
+	    (ent->timestamp < now - min(now, interval)))
 		return -1;
 
 	(*trials)++;

drivers/ata/pata_arasan_cf.c

@@ -943,9 +943,9 @@ static int arasan_cf_resume(struct device *dev)
 
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(arasan_cf_pm_ops, arasan_cf_suspend, arasan_cf_resume);
-#endif
 
 static struct platform_driver arasan_cf_driver = {
 	.probe		= arasan_cf_probe,
@@ -953,9 +953,7 @@ static struct platform_driver arasan_cf_driver = {
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &arasan_cf_pm_ops,
-#endif
 	},
 };